[ARM] 2884/1: BAST - fix PC104 IRQ routing

Patch from Ben Dooks

This has been broken for a while now, so fix the
problems with the code, test and bring up to date.
This also makes the code conditional on an
Kconfig option

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2871/1: Fixes an issue with gettimeofday not working correctly on Intel IOP3xx processors

Patch from Adam Brooks

The current gettimeofday implementation for the IOP3xx processors reads the contents of the timer interrupt register and does math on the value to figure out exactly what time it is.  To do this it  multiplies the contents of the timer register with a large constant.  The result is then divided by a large constant.  Unfortunately the result of the first multiplication is often too large for the register to hold.  The solution is to combine the two large constants to a single smaller constant at compile time.  Then the timer value can be divided by single smaller constant without any overflow issues.

Signed-off-by: Adam Brooks <adam.j.brooks@intel.com>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2883/1: PXA Sharpsl: Add detection of new PXA based Zaurii machine types

Patch from Richard Purdie

Add machine detection routines for several new models of PXA based Zaurii
(SL-C3000 - Spitz, SL-C1000 - Akita, SL-C3100 - Borzoi, SL-C6000 - Tosa).
Sharp continue to use broken bootloaders in ROM.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2880/1: OMAP 4/4: Update H2 defconfig

Patch from Tony Lindgren

This patch updates H2 defconfig

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2888/1: OMAP 3/4: Update omap include files, take 2

Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:
- Start adding 24xx support by Paul Mundt
- Clean-up of cpu detection by Dirk Behme and Tony Lindgren
- Add DSP header by Toshihiro Kobayashi
- Add support for mtd-xip by Vladimir Barinov
- Add various new mux registers
- Move OMAP specific serial defines back to serial.h

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2887/1: OMAP 2/4: Update files common to omap1 and omap2, take 2

Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:
- Clock updates by Tuukka Tikkanen, Juha Yrjola,
  Daniel Petrini and Tony Lindgren
- DMA fixes by Imre Deak, Juha Yrjola and Daniel Petrini
- Add support to dual-mode hardware timers by Lauri Leukkunen
- GPIO support for 24xx by Paul Mundt
- GPIO wake-up support by Tony Lindgren
- Better GPIO interrupt handler to not lose interrupts by
  Ralph Walden and Ladislav Michl
- Power Management updates by Tuukka Tikkanen
- Make Power Management code use new SRAM functions by
  Tony Lindgren

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 2889/1: S3C2410 - Add machine Anubis

Patch from Ben Dooks

Add the Simtec Anubis to the list of supported
machines in the arch/arm/mach-s3c2410 directory.
This ensures the core peripherals are registered,
the timer source is configured and the correct
power-management is enabled.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] Fix missed initialisers/missing comma

Fix the broken initialisers missed by the recent IRQ patch.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge /pub/scm/linux/kernel/git/paulus/ppc64-2.6

Merge branch 'upstream' of /linux/kernel/git/jgarzik/netdev-2.6

Merge master.kernel.org:/home/rmk/linux-2.6-arm

Merge /pub/scm/linux/kernel/git/sam/kbuild

Merge /pub/scm/linux/kernel/git/gregkh/driver-2.6

Merge /pub/scm/linux/kernel/git/gregkh/i2c-2.6

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

[PATCH] remove linux/version.h include from arch/ppc64

Changing CONFIG_LOCALVERSION rebuilds too much, for no apparent reason.

Use system_utsname for progress and debug header.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] Invert sense of SLB class bit

Currently, we set the class bit in kernel SLB entries, and clear it on
user SLB entries.  On POWER5, ERAT entries created in real mode have
the class bit clear.  So to avoid flushing kernel ERAT entries on each
context switch, this patch inverts our usage of the class bit, setting
it on user SLB entries and clearing it on kernel SLB entries.

Booted on POWER5 and G5.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[SPARC64]: Kconfig fix (GEN_RTC dependencies)

Yet another architecture not coverd by GEN_RTC - sparc64 never picked
it until now and it doesn't have asm/rtc.h to go with it, so it
wouldn't compile anyway (or have these ioctls in the user-visible
headers, for that matter).

FWIW, I'm very tempted to introduce ARCH_HAS_GEN_RTC and have it set
in arch/*/Kconfig for architectures that know what to do with this
stuff - for something supposedly generic the list of architectures
where it doesn't work is getting too long...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SUNSU]: Compile fixes.

sunsu had been broken by ->stop_tx/->start_tx API changes.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Don't include drivers/firmware/Kconfig

It's really not relevant for this platform in any
way, after all.

Signed-off-by: David S. Miller <davem@davemloft.net>

[RTC]: Use SA_SHIRQ in sparc specific code.

Based upon a report from Jason Wever.

Signed-off-by: David S. Miller <davem@davemloft.net>

[MOXA]: Fix this driver properly.

Actually, proper fix of that breakage is embarrassingly simple - it's yet
another gratitious leftover include of asm/segment.h, so incremental to the
previos would be removal of that BROKEN and removal of bogus include from
mxser.c itself.

Signed-off-by: David S. Miller <davem@davemloft.net>

[IEEE80211]: Use correct size_t printf format string in ieee80211_rx.c

Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] ppc64: Fix build with oprofile disabled

Fix build with oprofile disabled.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: Move oprofile_model into cpu feature struct

Move oprofile_model into cpu feature struct.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: Move oprofile_impl.h into include/asm-ppc64

Move oprofile_impl.h into include/asm-ppc64 in preparation for moving
oprofile_model into cpu feature struct.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: Add oprofile cpu_type to cpu feature struct

Add oprofile cpu_type to cpu feature struct.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: Use num_pmcs in oprofile code

Change oprofile to use num_pmcs from the cpu feature struct.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: remove CPU_FTR_PMC8

Remove the CPU_FTR_PMC8 feature now we encode the number of PMCs
directly.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: add number of PMCs to cputable

Add a field in the cputable struct to store the number of PMCs.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[IPW2200]: ipw2200.h needs linux/dma-mapping.h

Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] ppc64: Allow world readable /proc/ppc64/lparcfg

I would like to be able to read the lparcfg data from any user so we
can make "intelligent" decisions based on underlying attributes when
running in lpars.  Yes there's software that likes to do this :) and
runs as non-root.

It's very similar to say VM where you can get CP to provide feedback
of the real hardware inside a VM guest.

Signed-off-by: Wim Coekaerts <wim.coekaerts@oracle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: remove use of asm/segment.h

Removed PPC64 architecture specific users of asm/segment.h.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc/ppc64: Merge more include files

This patch merges several include files from
asm-ppc and asm-ppc64 into the new asm-powerpc.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] Move 3 more headers to asm-powerpc

Merged several nearly-identical header files from asm-ppc and asm-ppc64
into asm-powerpc.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: speedup cmpxchg

cmpxchg has the following code:

__typeof__(*(ptr)) _o_ = (o);
__typeof__(*(ptr)) _n_ = (n);

Unfortunately it makes gcc 4.0 store and load the variables to the stack.
Eg in atomic_dec_and_test we get:

  stw     r10,112(r1)
  stw     r9,116(r1)
  lwz     r9,112(r1)
  lwz     r0,116(r1)

x86 is just casting the values so do that instead. Also change __xchg*
and __cmpxchg* to take unsigned values, removing a few sign extensions.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: poison initmem

Poison initmem after we free it so we catch use after free issues.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: systemcfg is now a pointer

The following patch fixes 2 issues:
  1) use PLATFORM_LPAR bit to test if running in LPAR mode
  2) systemcfg pointer is assigned from static data in
     arch/ppc64/kernel/pacaData.c.  The file arch/ppc64/kernel/head.S
     now refers to is using the GOT binding to the pointer and hence
     must deref it.

Signed-off-by: Jimi Xenidis <jimix@watson.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: Consolidate early console and PPCDBG code

Consolidate the early console and PPCDBG code in udbg.c

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: Remove old includes

Trim some no longer needed includes from udbg.c and friends.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: Take udbg out of ppc_md

Take udbg out of ppc_md. Allows us to not overwrite early udbg inits
when assigning ppc_md.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: Split SCC and 15550 udbg code

Split scc and 15550 functions from udbg each into their own file.
This makes them more symetric with the lpar and btext code.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: Make udbg_init_uart set the ppc_md udbg methods.

make udbg_init_uart set the ppc_md udbg methods.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: Clean up CR handling

Make the 16550 and real mode 16550 use tail recursion like the scc code
instead of repeating the routine except for the character sent.

Gcc recoginizes the tail recursion and handles it efficently without
stack allocations.  The maple real putc shrinks from 188 to 104 bytes
of instructions.  udbg_putc drops from 188 to 140 bytes.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: Remove dummy getc routines

Now that xmon is fixed we should not need the dummy getc routines.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: dont bypass ppc_md.udbg* functions

udbg_getc_poll is a ppc_md function.   don't call directly into udbg.c

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: Add missing include

inline pmac_call_feature references ppc_md so include asm/machdep.h
in asm/pmac_feature.h

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[TCP]: Fix TCP_OFF() bug check introduced by previous change.

The TCP_OFF assignment at the bottom of that if block can indeed set
TCP_OFF without setting TCP_PAGE.  Since there is not much to be
gained from avoiding this situation, we might as well just zap the
offset.  The following patch should fix it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: 2.6.13 breaks libpcap (and tcpdump)

Patrick McHardy says:

  Never mind, I got it, we never fall through to the second switch
  statement anymore. I think we could simply break when load_pointer
  returns NULL. The switch statement will fall through to the default
  case and return 0 for all cases but 0 > k >= SKF_AD_OFF.

Here's a patch to do just that.

I left BPF_MSH alone because it's really a hack to calculate the IP
header length, which makes no sense when applied to the special data.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Do not protect sysctl_optmem_max with CONFIG_SYSCTL

The ipv4 and ipv6 protocols need to access it unconditionally.
SYSCTL=n build failure reported by Russell King.

Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER] remove bogus hand-coded htonll() from nenetlink_queue

htonll() is nothing else than cpu_to_be64(), so we'd rather call the
latter.

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IRDA]: IrDA prototype fixes

Every file should #include the header files containing the prototypes
of it's global functions.

In this case this showed that the prototype of irlan_print_filter()
was wrong which is also corrected in this patch.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SCTP]: net/sctp/sysctl.c should #include <net/sctp/sctp.h>

Every file should #include the header files containing the prototypes of
it's global functions.

sctp.h contains the prototypes of sctp_sysctl_{,un}register().

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: net/netfilter/nfnetlink*: make functions static

This patch makes needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4]: net/ipv4/ipconfig.c should #include <linux/nfs_fs.h>

Every file should #include the header files containing the prototypes of
it's global functions.

nfs_fs.h contains the prototype of root_nfs_parse_addr().

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ATM]: net/atm/ioctl.c should #include "common.h"

Every file should #include the header files containing the prototypes
of it's global functions.

common.h contains the prototype for vcc_ioctl().

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Update driver version and release date.

Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Use status tag to check for new events

Use the status tag to determine if there are new events in
tg3_interrupt_tagged(). We discussed about this a while ago with Grant
Grundler and DaveM. This scheme makes it unnecessary to clear the
updated bit in the status block when using tagged mode, and only
a simple comparison is needed to determine if there are new events.

The tp->lock around netif_rx_complete() and tg3_restart_ints() is also
removed. It is unnecessary with DaveM's new locking scheme.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Remove status block access in tg3_msi() and add prefetches

Remove unnecessary status block accesses in tg3_msi(). Since MSI is
not shared, it is unnecessary to read the status block to determine if
there are any new events in the MSI handler. It is also unnecessary to
clear the updated bit in the status block.

Since the poll list is per-cpu, tg3_poll() will be scheduled to run on
the same CPU that received the MSI. Prefetches for the status block
and the next rx descriptors are added in tg3_msi() to improve their
access times when tg3_poll() runs.

In the non-MSI irq handlers, we need to check the status block because
interrupts may be shared. Only prefetches for the next rx descriptors
are added.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Add PHY loopback test

Improve ethtool loopback self test by adding PHY loopback to the
existing MAC loopback test.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Add ethtool -p support

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Minor 5780 and 5752 fixes

Minor SerDes bug fixes for 5780S and nvram bug fixes for 5780 and
5752.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] klist: fix klist to have the same klist_add semantics as list_head

at the moment, the list_head semantics are

list_add(node, head)

whereas current klist semantics are

klist_add(head, node)

This is bound to cause confusion, and since klist is the newcomer, it
should follow the list_head semantics.

I also added missing include guards to klist.h

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Driver core: small cleanup; remove check for NULL before kfree() in driver core

Remove needless checking of variable for NULL before calling kfree() on it.
Applies to 2.6.13-rc6-git9

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Driver core: hande sysdev suspend failure

This patch adds the return value check for sysdev suspend and does
restore in failure case. Send the patch to pm-list, but seems lost, so I
resend it.

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Driver core: Documentation: use S_IRUSR | ... in stead of 0644

Change filemode to use defines in stead of 0644,
based on suggestions by Walter Harms and Domen Puncer.

Signed-off-by: Jan Veldeman <Jan.Veldeman@advalvas.be>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Driver core: Documentation: fix whitespace between parameters

Fix whitespace after comma between parameters.

Signed-off-by: Jan Veldeman <Jan.Veldeman@advalvas.be>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Floppy: add cmos attribute to floppy driver tidy

Fiddle with coding style a bit.

Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Floppy: Add cmos attribute to floppy driver

Currently only a device 'fdX' shows up in sysfs; the other possible
device for this drive (like fd0h1440 etc) must be guessed from there.

This patch corrects the floppy driver to create a platform device for
each floppy found; each platform device also has an attribute 'cmos'
which represents the cmos type for this drive. From this attribute the
other possible device types can be computed.

From: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Driver core: link device and all class devices derived from it.

Driver core: link device and all class devices derived from it.

To ease the task of locating class devices derived from a certain
device create symlinks from parent device to its class devices.
Change USB host class device name from usbX to usb_hostX to avoid
conflict when creating aforementioned links.

Tweaked by Greg to have the symlink be "class_name:class_device_name" in
order to prevent duplicate links.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Fix manual binding infinite loop

Fix for manual binding of drivers to devices.  Problem is if you pass in
a valid device id, but the driver refuses to bind.  Infinite loop as
write() tries to resubmit the data it just sent.

Thanks to Michal Ostrowski <mostrows@watson.ibm.com> for pointing the
problem out.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] orinoco: New driver - spectrum_cs.

Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree dee4f325520d4ea29397dd67ca657b7235bb1790 (from c88faac230cc9775445e5c644991c352e35c72a1)
Author: Pavel Roskin <proski@gnu.org>
Date:   Thu Sep 1 17:46:39 2005 -0400

    New driver - spectrum_cs.

    Driver for 802.11b cards using RAM-loadable Symbol firmware, such as
    Symbol Wireless Networker LA4100, CompactFlash cards by Socket
    Communications and Intel PRO/Wireless 2011B.

    The driver implements Symbol firmware download.  The rest is handled
    in hermes.c and orinoco.c.

    Utilities for downloading the Symbol firmware are available at
    http://sourceforge.net/projects/orinoco/
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] orinoco: New driver - orinoco_nortel.

Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree dce61aef99ceb57370b70222dc34d788666c0ac3 (from ceb6695092be8dcdfe2dec6ee5097d613011489d)
Author: Pavel Roskin <proski@gnu.org>
Date:   Thu Sep 1 15:50:55 2005 -0400

    New driver - orinoco_nortel.

    This is a driver for Nortel emobility PCI adaptors, which consist of an
    Orinoco compatible PCMCIA card and a simple PCI-to-PCMCIA bridge.  The
    driver initializes the device and uses Orinoco core driver for actual
    wireless networking.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] orinoco: Remove EXPERIMENTAL mark from PLX_HERMES, TMD_HERMES and PCI_HERMES.

Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree ceb6695092be8dcdfe2dec6ee5097d613011489d (from 6b39374a27eb4be7e9d82145ae270ba02ea90dc8)
Author: Pavel Roskin <proski@gnu.org>
Date:   Thu Sep 1 14:50:10 2005 -0400

    Remove EXPERIMENTAL mark from PLX_HERMES, TMD_HERMES and PCI_HERMES.

    Those drivers have been used for a long time, and there have been very
    few problem reports.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] orinoco: Optimize orinoco_join_ap()

Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree cb289b9f9b2a0f3ae7070a008f22e383b37526ee (from 56bfcdb38b3d04c1f8c1fd705e411f4be53b663c)
Author: Pavel Roskin <proski@gnu.org>
Date:   Thu Sep 1 19:05:16 2005 -0400

    Optimize orinoco_join_ap() - break from loop once the requested
BSSID
    is found.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] orinoco: Fix memory leak on error in processing hostscan frames.

Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree ca955293cdfd3139e150d3b4fed3922a7eb651fb (from cb289b9f9b2a0f3ae7070a008f22e383b37526ee)
Author: Pavel Roskin <proski@gnu.org>
Date:   Thu Sep 1 19:08:00 2005 -0400

    Fix memory leak on error in processing hostscan frames.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] orinoco: Remove entry for Intel PRO/Wireless 2011B.

Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree c88faac230cc9775445e5c644991c352e35c72a1 (from dce61aef99ceb57370b70222dc34d788666c0ac3)
Author: Pavel Roskin <proski@gnu.org>
Date:   Thu Sep 1 17:09:45 2005 -0400

    Remove entry for Intel PRO/Wireless 2011B.

    It is not supported by this driver because it has no firmware in
    flash.  spectrum_cs is needed for this device.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] orinoco: Change orinoco_translate_scan() to return error code on error.

Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree 8fc038ec51acf5f777fade80c5e38112b766aeee (from ca955293cdfd3139e150d3b4fed3922a7eb651fb)
Author: Pavel Roskin <proski@gnu.org>
Date:   Thu Sep 1 19:10:12 2005 -0400

    Change orinoco_translate_scan() to return error code on error.
    Adjust the caller to check for errors and clean up if needed.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] Kconfig fix (PHYLIB vs. s390)

drivers/net/phy/phy.c is broken on s390; it uses enable_irq() and friends
and these do not exist on s390.  Marked as broken for now.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] (15/22) Kconfig fix (82596)

driver is non-modular

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] mv643xx: add netpoll api support

Add support for the netpoll api for use by netconsole, kgdb, etc.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] mv643xx: Fix promiscuous mode handling

mv643xx_eth_get_config_reg() was reading the wrong register.
mv643xx_eth_set_config_reg() was or'ing instead of setting the
register.  These functions are trivial and both are called only from
mv643xx_eth_set_rx_mode() when changing to/from promiscuous mode.
Remove both functions and do the operations directly in
mv643xx_eth_set_rx_mode().

Also, maintain promiscuous mode setting across port resets.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] mv643xx: Disable per port bandwidth limits

The mv643xx chips support per port bandwith limits.  This patch
disables the bandwidth limits by clearing the MTU register.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] mv643xx: fix outstanding tx skb counter

This patch corrects the accounting of outstanding tx skbs.  It fixes
a bug that causes "Error on Queue Full" messages seen since scatter-gather
was enabled by using the hardware tcp/udp checksum generator.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] mv643xx: fix skb memory leak

This patch fixes an skb memory leak under heavy receive load
(whenever the more packets have been received than the NAPI budget
allows to be processed).

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sis190: basic sis191 support

The sis191 is the gigabit brother of the sis190. SiS's driver suggests
that the register set is backward compatible: this should hopefully
give a basic driver.

The device should allow the usual features from a modern ethernet
adapter (802.1q, SG, Jumbo frames, TSO, checksum offload). So far
the relevant register layout is not documented. SiS's driver does
not provide these features either (at least not for Linux).

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sis190: RGMII Tx internal delay fiddling

Don't ask.
The patch is based on SiS's GPLed driver.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sis190: make 10Mbps the default when handling the StationControl register

This patch does three things:
- widen the access to the StationControl register (note the SIS_W16
  versus SIS_W32 change);
- default to 10Mbps half duplex when the LPA can not be evaluated
  (reg31->ctl is identical for both). It can be argued that it makes
  sense as the lowest common denominator when everything else failed.
  Btw it works better than the current code. :o)
- remove some enums: they do not document anymore.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sis190: recent chipsets from SiS include a RGMII

Extracted from SiS's GPLed driver. From the few pdf available at SiS's,
it seems that the 965 and the 966 south bridge include this interface
whereas the 965L (and anything below) does not. It is expected to be a
sis191 related feature and should not hurt the existing sis190 driver.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sis190: unmask the link change events

link changes reporting does not work when the driver masks its irq event

Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] 'mdio_bus_exit' in discarded section .text.exit

When building with  CONFIG_PHYLIB=y on Itanium, I see:
 `mdio_bus_exit' referenced in section `.init.text' of
drivers/built-in.o: defined in discarded section `.exit.text' of
drivers/built-in.o

I believe that mdio_bus_exit should not be declared __exit, because it is
referencesd from __init sections in, say, phy_init().

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] drivers/net/ne3210.c: cleanups

- make two needlessly global functions static

- kill an ancient version variable

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] (7/7) __user annotations (ethtool)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] (6/7) missing include (ipw2200)

added missing include of dma-mapping.h

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] (5/7) iomem annotations, NULL noise removal (ipw2100)

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] (4/7) missing include (uli526x)

added missing include of dma-mapping.h, removed bogus ptrace.h (what the
hell was it doing there, in the first place?)

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] (3/7) iomem annotations (s2io)

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] (2/7) iomem annotations (e1000)

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] (1/7) chelsio sparse annotations

NULL noise removal, __iomem annotations, use of if_mii() instead of
open-coding it.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[ARM] 2882/1: pxa2xx_sharpsl: Update PCMCIA driver to support variety of new hardware

Patch from Richard Purdie

This patch updates the PCMCIA pxa2xx_sharpsl driver to support multiple scoop
devices by adding a scoop to pcmcia slot mapping structure. It adds platform
support for poodle, is known to work on spitz (which is dual slot) and
should also support collie with a minor amount of further work.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>