virtio/vsock: replace virtio_vsock_pkt with sk_buff

[ Upstream commit 71dc9ec9ac7d3eee785cdc986c3daeb821381e20 ]

This commit changes virtio/vsock to use sk_buff instead of
virtio_vsock_pkt. Beyond better conforming to other net code, using
sk_buff allows vsock to use sk_buff-dependent features in the future
(such as sockmap) and improves throughput.

This patch introduces the following performance changes:

Tool: Uperf
Env: Phys Host + L1 Guest
Payload: 64k
Threads: 16
Test Runs: 10
Type: SOCK_STREAM
Before: commit b7bfaa761d760 ("Linux 6.2-rc3")

Before
------
g2h: 16.77Gb/s
h2g: 10.56Gb/s

After
-----
g2h: 21.04Gb/s
h2g: 10.76Gb/s

Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 3a5cc90a4d17 ("vsock/virtio: remove socket from connected/bound list on shutdown")
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-core: use pr_warn_ratelimited() in bio_check_ro()

[ Upstream commit 1b0a151c10a6d823f033023b9fdd9af72a89591b ]

If one of the underlying disks of raid or dm is set to read-only, then
each io will generate new log, which will cause message storm. This
environment is indeed problematic, however we can't make sure our
naive custormer won't do this, hence use pr_warn_ratelimited() to
prevent message storm in this case.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Fixes: 57e95e4670d1 ("block: fix and cleanup bio_check_ro")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20231107111247.2157820-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: fix uaf in nbd_open

[ Upstream commit 327462725b0f759f093788dfbcb2f1fd132f956b ]

Commit 4af5f2e03013 ("nbd: use blk_mq_alloc_disk and
blk_cleanup_disk") cleans up disk by blk_cleanup_disk() and it won't set
disk->private_data as NULL as before. UAF may be triggered in nbd_open()
if someone tries to open nbd device right after nbd_put() since nbd has
been free in nbd_dev_remove().

Fix this by implementing ->free_disk and free private data in it.

Fixes: 4af5f2e03013 ("nbd: use blk_mq_alloc_disk and blk_cleanup_disk")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231107103435.2074904-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tg3: power down device only on SYSTEM_POWER_OFF

[ Upstream commit 9fc3bc7643341dc5be7d269f3d3dbe441d8d7ac3 ]

Dell R650xs servers hangs on reboot if tg3 driver calls
tg3_power_down.

This happens only if network adapters (BCM5720 for R650xs) were
initialized using SNP (e.g. by booting ipxe.efi).

The actual problem is on Dell side, but this fix allows servers
to come back alive after reboot.

Signed-off-by: George Shuklin <george.shuklin@gmail.com>
Fixes: 2ca1c94ce0b6 ("tg3: Disable tg3 device on system reboot to avoid triggering AER")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231103115029.83273-1-george.shuklin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: fix error-handling for io_uring nvme-passthrough

[ Upstream commit 1147dd0503564fa0e03489a039f9e0c748a03db4 ]

Driver may return an error before submitting the command to the device.
Ensure that such error is propagated up.

Fixes: 456cba386e94 ("nvme: wire-up uring-cmd support for io-passthru on char-device.")
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: put sk reference if close work was canceled

[ Upstream commit aa96fbd6d78d9770323b21e2c92bd38821be8852 ]

Note that we always hold a reference to sock when attempting
to submit close_work. Therefore, if we have successfully
canceled close_work from pending, we MUST release that reference
to avoid potential leaks.

Fixes: 42bfba9eaa33 ("net/smc: immediate termination for SMCD link groups")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: allow cdc msg send rather than drop it with NULL sndbuf_desc

[ Upstream commit c5bf605ba4f9d6fbbb120595ab95002f4716edcb ]

This patch re-fix the issues mentioned by commit 22a825c541d7
("net/smc: fix NULL sndbuf_desc in smc_cdc_tx_handler()").

Blocking sending message do solve the issues though, but it also
prevents the peer to receive the final message. Besides, in logic,
whether the sndbuf_desc is NULL or not have no impact on the processing
of cdc message sending.

Hence that, this patch allows the cdc message sending but to check the
sndbuf_desc with care in smc_cdc_tx_handler().

Fixes: 22a825c541d7 ("net/smc: fix NULL sndbuf_desc in smc_cdc_tx_handler()")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: fix dangling sock under state SMC_APPFINCLOSEWAIT

[ Upstream commit 5211c9729484c923f8d2e06bd29f9322cc42bb8f ]

Considering scenario:

smc_cdc_rx_handler
__smc_release
sock_set_flag
smc_close_active()
sock_set_flag

__set_bit(DEAD) __set_bit(DONE)

Dues to __set_bit is not atomic, the DEAD or DONE might be lost.
if the DEAD flag lost, the state SMC_CLOSED  will be never be reached
in smc_close_passive_work:

if (sock_flag(sk, SOCK_DEAD) &&
smc_close_sent_any_close(conn)) {
sk->sk_state = SMC_CLOSED;
} else {
/* just shutdown, but not yet closed locally */
sk->sk_state = SMC_APPFINCLOSEWAIT;
}

Replace sock_set_flags or __set_bit to set_bit will fix this problem.
Since set_bit is atomic.

Fixes: b38d732477e4 ("smc: socket closing and linkgroup cleanup")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Free pending and dropped SQEs

[ Upstream commit 3423ca23e08bf285a324237abe88e7e7d9becfe6 ]

On interface down, the pending SQEs in the NIX get dropped
or drained out during SMQ flush. But skb's pointed by these
SQEs never get free or updated to the stack as respective CQE
never get added.
This patch fixes the issue by freeing all valid skb's in SQ SG list.

Fixes: b1bc8457e9d0 ("octeontx2-pf: Cleanup all receive buffers in SG descriptor")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: qos send queues management

[ Upstream commit ab6dddd2a669a0ecc2ce07485c7a15fadbb5a0aa ]

Current implementation is such that the number of Send queues (SQs)
are decided on the device probe which is equal to the number of online
cpus. These SQs are allocated and deallocated in interface open and c
lose calls respectively.

This patch defines new APIs for initializing and deinitializing Send
queues dynamically and allocates more number of transmit queues for
QOS feature.

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 3423ca23e08b ("octeontx2-pf: Free pending and dropped SQEs")
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Rename tot_tx_queues to non_qos_queues

[ Upstream commit 508c58f76ca510956625c945f9b8eb104f2c8208 ]

current implementation is such that tot_tx_queues contains both
xdp queues and normal tx queues. which will be allocated in interface
open calls and deallocated on interface down calls respectively.

With addition of QOS, where send quees are allocated/deallacated upon
user request Qos send queues won't be part of tot_tx_queues. So this
patch renames tot_tx_queues to non_qos_queues.

Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 3423ca23e08b ("octeontx2-pf: Free pending and dropped SQEs")
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: pmtu.sh: fix result checking

[ Upstream commit 63e201916b27260218e528a2f8758be47f99bbf4 ]

In the PMTU test, when all previous tests are skipped and the new test
passes, the exit code is set to 0. However, the current check mistakenly
treats this as an assignment, causing the check to pass every time.

Consequently, regardless of how many tests have failed, if the latest test
passes, the PMTU test will report a pass.

Fixes: 2a9d3716b810 ("selftests: pmtu.sh: improve the test result processing")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: xgmac: Enable support for multiple Flexible PPS outputs

[ Upstream commit db456d90a4c1b43b6251fa4348c8adc59b583274 ]

From XGMAC Core 3.20 and later, each Flexible PPS has individual PPSEN bit
to select Fixed mode or Flexible mode. The PPSEN must be set, or it stays
in Fixed PPS mode by default.
XGMAC Core prior 3.20, only PPSEN0(bit 4) is writable. PPSEN{1,2,3} are
read-only reserved, and they are already in Flexible mode by default, our
new code always set PPSEN{1,2,3} do not make things worse ;-)

Fixes: 95eaf3cd0a90 ("net: stmmac: dwxgmac: Add Flexible PPS support")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Fix termination state for idr_for_each_entry_ul()

[ Upstream commit e8ae8ad479e2d037daa33756e5e72850a7bd37a9 ]

The comment for idr_for_each_entry_ul() states

  after normal termination @entry is left with the value NULL

This is not correct in the case where UINT_MAX has an entry in the idr.
In that case @entry will be non-NULL after termination.
No current code depends on the documentation being correct, but to
save future code we should fix it.

Also fix idr_for_each_entry_continue_ul().  While this is not documented
as leaving @entry as NULL, the mellanox driver appears to depend on
it doing so.  So make that explicit in the documentation as well as in
the code.

Fixes: e33d2b74d805 ("idr: fix overflow case for idr_for_each_entry_ul()")
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Chris Mi <chrism@mellanox.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: r8169: Disable multicast filter for RTL8168H and RTL8107E

[ Upstream commit efa5f1311c4998e9e6317c52bc5ee93b3a0f36df ]

RTL8168H and RTL8107E ethernet adapters erroneously filter unicast
eapol packets unless allmulti is enabled. These devices correspond to
RTL_GIGA_MAC_VER_46 and VER_48. Add an exception for VER_46 and VER_48
in the same way that VER_35 has an exception.

Fixes: 6e1d0b898818 ("r8169:add support for RTL8168H and RTL8107E")
Signed-off-by: Patrick Thompson <ptf@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231030205031.177855-1-ptf@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dccp/tcp: Call security_inet_conn_request() after setting IPv6 addresses.

[ Upstream commit 23be1e0e2a83a8543214d2599a31d9a2185a796b ]

Initially, commit 4237c75c0a35 ("[MLSXFRM]: Auto-labeling of child
sockets") introduced security_inet_conn_request() in some functions
where reqsk is allocated.  The hook is added just after the allocation,
so reqsk's IPv6 remote address was not initialised then.

However, SELinux/Smack started to read it in netlbl_req_setattr()
after commit e1adea927080 ("calipso: Allow request sockets to be
relabelled by the lsm.").

Commit 284904aa7946 ("lsm: Relocate the IPv4 security_inet_conn_request()
hooks") fixed that kind of issue only in TCPv4 because IPv6 labeling was
not supported at that time.  Finally, the same issue was introduced again
in IPv6.

Let's apply the same fix on DCCPv6 and TCPv6.

Fixes: e1adea927080 ("calipso: Allow request sockets to be relabelled by the lsm.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dccp: Call security_inet_conn_request() after setting IPv4 addresses.

[ Upstream commit fa2df45af13091f76b89adb84a28f13818d5d631 ]

Initially, commit 4237c75c0a35 ("[MLSXFRM]: Auto-labeling of child
sockets") introduced security_inet_conn_request() in some functions
where reqsk is allocated.  The hook is added just after the allocation,
so reqsk's IPv4 remote address was not initialised then.

However, SELinux/Smack started to read it in netlbl_req_setattr()
after the cited commits.

This bug was partially fixed by commit 284904aa7946 ("lsm: Relocate
the IPv4 security_inet_conn_request() hooks").

This patch fixes the last bug in DCCPv4.

Fixes: 389fb800ac8b ("netlabel: Label incoming TCP connections correctly in SELinux")
Fixes: 07feee8f812f ("netlabel: Cleanup the Smack/NetLabel code to fix incoming TCP connections")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: page_pool: add missing free_percpu when page_pool_init fail

[ Upstream commit 8ffbd1669ed1d58939d6e878dffaa2f60bf961a4 ]

When ptr_ring_init() returns failure in page_pool_init(), free_percpu()
is not called to free pool->recycle_stats, which may cause memory
leak.

Fixes: ad6fa1e1ab1b ("page_pool: Add recycle stats")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20231030091256.2915394-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Fix holes in error code

[ Upstream commit 7aeeb2cb7a2570bb69a87ad14018b03e06ce5be5 ]

Error code strings are not getting printed properly
due to holes. Print error code as well.

Fixes: 51afe9026d0c ("octeontx2-pf: NIX TX overwrites SQ_CTX_HW_S[SQ_INT]")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231027021953.1819959-2-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Fix error codes

[ Upstream commit 96b9a68d1a6e4f889d453874c9e359aa720b520f ]

Some of error codes were wrong. Fix the same.

Fixes: 51afe9026d0c ("octeontx2-pf: NIX TX overwrites SQ_CTX_HW_S[SQ_INT]")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231027021953.1819959-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

inet: shrink struct flowi_common

[ Upstream commit 1726483b79a72e0150734d5367e4a0238bf8fcff ]

I am looking at syzbot reports triggering kernel stack overflows
involving a cascade of ipvlan devices.

We can save 8 bytes in struct flowi_common.

This patch alone will not fix the issue, but is a start.

Fixes: 24ba14406c5c ("route: Add multipath_hash in flowi_common to make user-define hash")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: wenxu <wenxu@ucloud.cn>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231025141037.3448203-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Check map->usercnt after timer->timer is assigned

[ Upstream commit fd381ce60a2d79cc967506208085336d3d268ae0 ]

When there are concurrent uref release and bpf timer init operations,
the following sequence diagram is possible. It will break the guarantee
provided by bpf_timer: bpf_timer will still be alive after userspace
application releases or unpins the map. It also will lead to kmemleak
for old kernel version which doesn't release bpf_timer when map is
released.

bpf program X:

bpf_timer_init()
  lock timer->lock
    read timer->timer as NULL
    read map->usercnt != 0

                process Y:

                close(map_fd)
                  // put last uref
                  bpf_map_put_uref()
                    atomic_dec_and_test(map->usercnt)
                      array_map_free_timers()
                        bpf_timer_cancel_and_free()
                          // just return
                          read timer->timer is NULL

    t = bpf_map_kmalloc_node()
    timer->timer = t
  unlock timer->lock

Fix the problem by checking map->usercnt after timer->timer is assigned,
so when there are concurrent uref release and bpf timer init, either
bpf_timer_cancel_and_free() from uref release reads a no-NULL timer
or the newly-added atomic64_read() returns a zero usercnt.

Because atomic_dec_and_test(map->usercnt) and READ_ONCE(timer->timer)
in bpf_timer_cancel_and_free() are not protected by a lock, so add
a memory barrier to guarantee the order between map->usercnt and
timer->timer. Also use WRITE_ONCE(timer->timer, x) to match the lockless
read of timer->timer in bpf_timer_cancel_and_free().

Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Closes: https://lore.kernel.org/bpf/CABcoxUaT2k9hWsS1tNgXyoU3E-=PuOgMn737qK984fbFmfYixQ@mail.gmail.com
Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231030063616.1653024-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING

[ Upstream commit 19b3f72a41a8751e26bffc093bb7e1cef29ad579 ]

syzbot reported the following uninit-value access issue [1]:

=====================================================
BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline]
BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756
 strlen lib/string.c:418 [inline]
 strstr+0xb8/0x2f0 lib/string.c:756
 tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595
 genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline]
 genl_rcv_msg+0x11ec/0x1290 net/netlink/genetlink.c:1066
 netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2545
 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1075
 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
 netlink_unicast+0xf47/0x1250 net/netlink/af_netlink.c:1368
 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910
 sock_sendmsg_nosec net/socket.c:730 [inline]
 sock_sendmsg net/socket.c:753 [inline]
 ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
 __sys_sendmsg net/socket.c:2624 [inline]
 __do_sys_sendmsg net/socket.c:2633 [inline]
 __se_sys_sendmsg net/socket.c:2631 [inline]
 __x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Uninit was created at:
 slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767
 slab_alloc_node mm/slub.c:3478 [inline]
 kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523
 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559
 __alloc_skb+0x318/0x740 net/core/skbuff.c:650
 alloc_skb include/linux/skbuff.h:1286 [inline]
 netlink_alloc_large_skb net/netlink/af_netlink.c:1214 [inline]
 netlink_sendmsg+0xb34/0x13d0 net/netlink/af_netlink.c:1885
 sock_sendmsg_nosec net/socket.c:730 [inline]
 sock_sendmsg net/socket.c:753 [inline]
 ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
 __sys_sendmsg net/socket.c:2624 [inline]
 __do_sys_sendmsg net/socket.c:2633 [inline]
 __se_sys_sendmsg net/socket.c:2631 [inline]
 __x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

TIPC bearer-related names including link names must be null-terminated
strings. If a link name which is not null-terminated is passed through
netlink, strstr() and similar functions can cause buffer overrun. This
causes the above issue.

This patch changes the nla_policy for bearer-related names from NLA_STRING
to NLA_NUL_STRING. This resolves the issue by ensuring that only
null-terminated strings are accepted as bearer-related names.

syzbot reported similar uninit-value issue related to bearer names [2]. The
root cause of this issue is that a non-null-terminated bearer name was
passed. This patch also resolved this issue.

Fixes: 7be57fc69184 ("tipc: add link get/dump to new netlink api")
Fixes: 0655f6a8635b ("tipc: add bearer disable/enable to new netlink api")
Reported-and-tested-by: syzbot+5138ca807af9d2b42574@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5138ca807af9d2b42574 [1]
Reported-and-tested-by: syzbot+9425c47dccbcb4c17d51@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9425c47dccbcb4c17d51 [2]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231030075540.3784537-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hsr: Prevent use after free in prp_create_tagged_frame()

[ Upstream commit 876f8ab52363f649bcc74072157dfd7adfbabc0d ]

The prp_fill_rct() function can fail.  In that situation, it frees the
skb and returns NULL.  Meanwhile on the success path, it returns the
original skb.  So it's straight forward to fix bug by using the returned
value.

Fixes: 451d8123f897 ("net: prp: add packet handling support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/57af1f28-7f57-4a96-bcd3-b7a0f2340845@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

llc: verify mac len before reading mac header

[ Upstream commit 7b3ba18703a63f6fd487183b9262b08e5632da1b ]

LLC reads the mac header with eth_hdr without verifying that the skb
has an Ethernet header.

Syzbot was able to enter llc_rcv on a tun device. Tun can insert
packets without mac len and with user configurable skb->protocol
(passing a tun_pi header when not configuring IFF_NO_PI).

    BUG: KMSAN: uninit-value in llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline]
    BUG: KMSAN: uninit-value in llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111
    llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline]
    llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111
    llc_rcv+0xc5d/0x14a0 net/llc/llc_input.c:218
    __netif_receive_skb_one_core net/core/dev.c:5523 [inline]
    __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637
    netif_receive_skb_internal net/core/dev.c:5723 [inline]
    netif_receive_skb+0x58/0x660 net/core/dev.c:5782
    tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
    tun_get_user+0x54c5/0x69c0 drivers/net/tun.c:2002

Add a mac_len test before all three eth_hdr(skb) calls under net/llc.

There are further uses in include/net/llc_pdu.h. All these are
protected by a test skb->protocol == ETH_P_802_2. Which does not
protect against this tun scenario.

But the mac_len test added in this patch in llc_fixup_skb will
indirectly protect those too. That is called from llc_rcv before any
other LLC code.

It is tempting to just add a blanket mac_len check in llc_rcv, but
not sure whether that could break valid LLC paths that do not assume
an Ethernet header. 802.2 LLC may be used on top of non-802.3
protocols in principle. The below referenced commit shows that used
to, on top of Token Ring.

At least one of the three eth_hdr uses goes back to before the start
of git history. But the one that syzbot exercises is introduced in
this commit. That commit is old enough (2008), that effectively all
stable kernels should receive this.

Fixes: f83f1768f833 ("[LLC]: skb allocation size for responses")
Reported-by: syzbot+a8c7be6dee0de1b669cc@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231025234251.3796495-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: ixp4xx: Make sure restart always works

[ Upstream commit b4075ecfe348a44209534c75ad72392c63a489a6 ]

The IXP4xx watchdog in early "A0" silicon is unreliable and
cannot be registered, however for some systems such as the
USRobotics USR8200 the watchdog is the only restart option,
so implement a "dummy" watchdog that can only support restart
in this case.

Fixes: 1aea522809e6 ("watchdog: ixp4xx: Implement restart")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230926-ixp4xx-wdt-restart-v2-1-15cf4639b423@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: synaptics-rmi4 - fix use after free in rmi_unregister_function()

[ Upstream commit eb988e46da2e4eae89f5337e047ce372fe33d5b1 ]

The put_device() calls rmi_release_function() which frees "fn" so the
dereference on the next line "fn->num_of_irqs" is a use after free.
Move the put_device() to the end to fix this.

Fixes: 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/706efd36-7561-42f3-adfa-dd1d0bd4f5a1@moroto.mountain
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: brcmstb: Utilize appropriate clock APIs in suspend/resume

[ Upstream commit e9bc4411548aaa738905d37851a0146c16b3bb21 ]

The suspend/resume functions currently utilize
clk_disable()/clk_enable() respectively which may be no-ops with certain
clock providers such as SCMI. Fix this to use clk_disable_unprepare()
and clk_prepare_enable() respectively as we should.

Fixes: 3a9f5957020f ("pwm: Add Broadcom BCM7038 PWM controller support")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: sti: Reduce number of allocations and drop usage of chip_data

[ Upstream commit 2d6812b41e0d832919d72c72ebddf361df53ba1b ]

Instead of using one allocation per capture channel, use a single one. Also
store it in driver data instead of chip data.

This has several advantages:

 - driver data isn't cleared when pwm_put() is called
 - Reduces memory fragmentation

Also register the pwm chip only after the per capture channel data is
initialized as the capture callback relies on this initialization and it
might be called even before pwmchip_add() returns.

It would be still better to have struct sti_pwm_compat_data and the
per-channel data struct sti_cpt_ddata in a single memory chunk, but that's
not easily possible because the number of capture channels isn't known yet
when the driver data struct is allocated.

Fixes: e926b12c611c ("pwm: Clear chip_data in pwm_put()")
Reported-by: George Stark <gnstark@sberdevices.ru>
Fixes: c97267ae831d ("pwm: sti: Add PWM capture callback")
Link: https://lore.kernel.org/r/20230705080650.2353391-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regmap: prevent noinc writes from clobbering cache

[ Upstream commit 984a4afdc87a1fc226fd657b1cd8255c13d3fc1a ]

Currently, noinc writes are cached as if they were standard incrementing
writes, overwriting unrelated register values in the cache. Instead, we
want to cache the last value written to the register, as is done in the
accelerated noinc handler (regmap_noinc_readwrite).

Fixes: cdf6b11daa77 ("regmap: Add regmap_noinc_write API")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Link: https://lore.kernel.org/r/20231101142926.2722603-2-ben.wolsieffer@hefring.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cec: meson: always include meson sub-directory in Makefile

[ Upstream commit 94e27fbeca27d8c772fc2bc807730aaee5886055 ]

'meson' directory contains two separate drivers, so it should be added
to Makefile compilation hierarchy unconditionally, because otherwise the
meson-ao-cec-g12a won't be compiled if meson-ao-cec is not selected.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 4be5e8648b0c ("media: move CEC platform drivers to a separate directory")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb-v2: af9035: fix missing unlock

[ Upstream commit f31b2cb85f0ee165d78e1c43f6d69f82cc3b2145 ]

Instead of returning an error, goto the mutex unlock at
the end of the function.

Fixes smatch warning:

drivers/media/usb/dvb-usb-v2/af9035.c:467 af9035_i2c_master_xfer() warn: inconsistent returns '&d->i2c_mutex'.
  Locked on  : 326,387
  Unlocked on: 465,467

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 7bf744f2de0a ("media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cadence: csi2rx: Unregister v4l2 async notifier

[ Upstream commit b2701715301a49b53d05c7d43f3fedc3b8743bfc ]

The notifier is added to the global notifier list when registered. When
the module is removed, the struct csi2rx_priv in which the notifier is
embedded, is destroyed. As a result the notifier list has a reference to
a notifier that no longer exists. This causes invalid memory accesses
when the list is iterated over. Similar for when the probe fails.
Unregister and clean up the notifier to avoid this.

Fixes: 1fc3b37f34f6 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver")

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cedrus: Fix clock/reset sequence

[ Upstream commit 36fe515c1a3cd5eac148e8a591a82108d92d5522 ]

According to H6 user manual, resets should always be de-asserted before
clocks are enabled. This is also consistent with vendor driver.

Fixes: d5aecd289bab ("media: cedrus: Implement runtime PM")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vidtv: mux: Add check and kfree for kstrdup

[ Upstream commit 1fd6eb12642e0c32692924ff359c07de4b781d78 ]

Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.
Moreover, use kfree() in the later error handling in order to avoid
memory leak.

Fixes: c2f78f0cb294 ("media: vidtv: psi: add a Network Information Table (NIT)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vidtv: psi: Add check for kstrdup

[ Upstream commit 76a2c5df6ca8bd8ada45e953b8c72b746f42918d ]

Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.

Fixes: 7a7899f6f58e ("media: vidtv: psi: Implement an Event Information Table (EIT)")
Fixes: c2f78f0cb294 ("media: vidtv: psi: add a Network Information Table (NIT)")
Fixes: f90cf6079bf6 ("media: vidtv: add a bridge driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: s3c-camif: Avoid inappropriate kfree()

[ Upstream commit 61334819aca018c3416ee6c330a08a49c1524fc3 ]

s3c_camif_register_video_node() works with video_device structure stored
as a field of camif_vp, so it should not be kfreed.
But there is video_device_release() on error path that do it.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: babde1c243b2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface")
Signed-off-by: Katya Orlova <e.orlova@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mtk-jpegenc: Fix bug in JPEG encode quality selection

[ Upstream commit 0aeccc63f3bc4cfd49dc4893da1409402ee6b295 ]

The driver uses the upper-bound approach to decide the target JPEG
encode quality, but there's a logic bug that if the desired quality is
higher than what the driver can support, the driver falls back to using
the worst quality.

Fix the bug by assuming using the best quality in the beginning, and
with trivial refactor to avoid long lines.

Fixes: 45f13a57d813 ("media: platform: Add jpeg enc feature")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: handle firmware debug message

[ Upstream commit 6496617b2b06d7004a5cbd53d48f19567d6b018c ]

decoder firmware may notify host some debug message,
it can help analyze the state of the firmware in case of error

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: bttv: fix use after free error due to btv->timeout timer

[ Upstream commit bd5b50b329e850d467e7bcc07b2b6bde3752fbda ]

There may be some a race condition between timer function
bttv_irq_timeout and bttv_remove. The timer is setup in
probe and there is no timer_delete operation in remove
function. When it hit kfree btv, the function might still be
invoked, which will cause use after free bug.

This bug is found by static analysis, it may be false positive.

Fix it by adding del_timer_sync invoking to the remove function.

cpu0                cpu1
                  bttv_probe
                    ->timer_setup
                      ->bttv_set_dma
                        ->mod_timer;
bttv_remove
  ->kfree(btv);
                  ->bttv_irq_timeout
                    ->USE btv

Fixes: 162e6376ac58 ("media: pci: Convert timers to use timer_setup()")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: Fix a memory leak when ov5640_probe fails

[ Upstream commit 20290feaaeb76cc719921aad275ccb18662a7c3a ]

sensor->ctrls.handler is initialized in ov5640_init_controls(),
so when the sensor is not connected and ov5640_sensor_resume()
fails, sensor->ctrls.handler should be released, otherwise a
memory leak will be detected:

unreferenced object 0xc674ca80 (size 64):
   comm "swapper/0", pid 1, jiffies 4294938337 (age 204.880s)
   hex dump (first 32 bytes):
     80 55 75 c6 80 54 75 c6 00 55 75 c6 80 52 75 c6 .Uu..Tu..Uu..Ru.
     00 53 75 c6 00 00 00 00 00 00 00 00 00 00 00 00 .Su..........

Fixes: 85644a9b37ec ("media: ov5640: Use runtime PM")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: max9286: Fix some redundant of_node_put() calls

[ Upstream commit 0822315e46b400f611cba1193456ee6a5dc3e41d ]

This is odd to have a of_node_put() just after a for_each_child_of_node()
or a for_each_endpoint_of_node() loop. It should already be called
during the last iteration.

Remove these calls.

Fixes: 66d8c9d2422d ("media: i2c: Add MAX9286 driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: fix vblank unchange issue when work at dvp mode

[ Upstream commit 8fc29e3c9f682d4ad9b0764d44ecc6c19b000051 ]

The value of V4L2_CID_VBLANK control is initialized to default vblank
value of 640x480 when driver probe. When OV5640 work at DVP mode, the
control value won't update and lead to sensor can't output data if the
resolution remain the same as last time since incorrect total vertical
size. So update it when there is a new value applied.

Fixes: bce93b827de6 ("media: ov5640: Add VBLANK control")
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: Drop dead code using frame_interval

[ Upstream commit eeaa47d182fedfe68b8fd40ef3798761c8904791 ]

The ov5640_update_pixel_rate() function handles the parallel and MIPI
CSI-2 cases separately.

When running on a parallel setup the V4L2_CID_PIXEL_RATE value is
calculated at the beginning of the function using the values configured
with the frame_interval operations, and then the function immediately
returns.

The remaining of the function handles the MIPI CSI-2 configuration and
should not use the 'current_fr' and 'def_fps' fields as those are only
relevant for parallel mode.

Drop a small section of dead code that updates vblank using
frame_interval on a MIPI CSI-2 setup.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: 8fc29e3c9f68 ("media: ov5640: fix vblank unchange issue when work at dvp mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: verisilicon: Do not enable G2 postproc downscale if source is narrower than destination

[ Upstream commit 6e481d52d363218a3e6feb31694da74b38b30fad ]

In case of encoded input VP9 data width that is not multiple of macroblock
size, which is 16 (e.g. 1080x1920 frames, where 1080 is multiple of 8), the
width is padded to be a multiple of macroblock size (for 1080x1920 frames,
that is 1088x1920).

The hantro_postproc_g2_enable() checks whether the encoded data width is
equal to decoded frame width, and if not, enables down-scale mode. For a
frame where input is 1080x1920 and output is 1088x1920, this is incorrect
as no down-scale happens, the frame is only padded. Enabling the down-scale
mode in this case results in corrupted frames.

Fix this by adjusting the check to test whether encoded data width is
greater than decoded frame width, and only in that case enable the
down-scale mode.

To generate input test data to trigger this bug, use e.g.:
$ gst-launch-1.0 videotestsrc ! video/x-raw,width=272,height=256,format=I420 ! \
                 vp9enc ! matroskamux ! filesink location=/tmp/test.vp9
To trigger the bug upon decoding (note that the NV12 must be forced, as
that assures the output data would pass the G2 postproc):
$ gst-launch-1.0 filesrc location=/tmp/test.vp9 ! matroskademux ! vp9parse ! \
                 v4l2slvp9dec ! video/x-raw,format=NV12 ! videoconvert ! fbdevsink

Fixes: 79c987de8b35 ("media: hantro: Use post processor scaling capacities")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hantro: Check whether reset op is defined before use

[ Upstream commit 88d4b23a629ebd34f682f770cb6c2116c851f7b8 ]

The i.MX8MM/N/P does not define the .reset op since reset of the VPU is
done by genpd. Check whether the .reset op is defined before calling it
to avoid NULL pointer dereference.

Note that the Fixes tag is set to the commit which removed the reset op
from i.MX8M Hantro G2 implementation, this is because before this commit
all the implementations did define the .reset op.

Fixes: 6971efb70ac3 ("media: hantro: Allow i.MX8MQ G1 and G2 to run independently")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pcmcia: ds: fix possible name leak in error path in pcmcia_device_add()

[ Upstream commit 99e1241049a92dd3e9a90a0f91e32ce390133278 ]

Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically.
Therefore, it needs to be freed, which is done by the driver core for
us once all references to the device are gone. Therefore, move the
dev_set_name() call immediately before the call device_register(), which
either succeeds (then the freeing will be done upon subsequent remvoal),
or puts the reference in the error call. Also, it is not unusual that the
return value of dev_set_name is not checked.

Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[linux@dominikbrodowski.net: simplification, commit message modified]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pcmcia: ds: fix refcount leak in pcmcia_device_add()

[ Upstream commit 402ab979b29126068e0b596b641422ff7490214c ]

As the comment of device_register() says, it should use put_device()
to give up the reference in the error path. Then, insofar resources
will be freed in pcmcia_release_dev(), the error path is no longer
needed. In particular, this means that the (previously missing) dropping
of the reference to &p_dev->function_config->ref is now handled by
pcmcia_release_dev().

Fixes: 360b65b95bae ("[PATCH] pcmcia: make config_t independent, add reference counting")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[linux@dominikbrodowski.net: simplification, commit message rewrite]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pcmcia: cs: fix possible hung task and memory leak pccardd()

[ Upstream commit e3ea1b4847e49234e691c0d66bf030bd65bb7f2b ]

If device_register() returns error in pccardd(), it leads two issues:

1. The socket_released has never been completed, it will block
   pcmcia_unregister_socket(), because of waiting for completion
   of socket_released.
2. The device name allocated by dev_set_name() is leaked.

Fix this two issues by calling put_device() when device_register() fails.
socket_released can be completed in pcmcia_release_socket(), the name can
be freed in kobject_cleanup().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: pcf85363: fix wrong mask/val parameters in regmap_update_bits call

[ Upstream commit 2be36c09b6b07306be33519e1aa70d2e2a2161bb ]

The current implementation passes PIN_IO_INTA_OUT (2) as a mask and
PIN_IO_INTAPM (GENMASK(1, 0)) as a value.
Swap the variables to assign mask and value the right way.

This error was first introduced with the alarm support. For better or
worse it worked as expected because 0x02 was applied as a mask to 0x03,
resulting 0x02 anyway. This will of course not work for any other value.

Fixes: e5aac267a10a ("rtc: pcf85363: add alarm support")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231013-topic-pcf85363_regmap_update_bits-v1-1-c454f016f71f@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virt: sevguest: Fix passing a stack buffer as a scatterlist target

[ Upstream commit db10cb9b574675402bfd8fe1a31aafdd45b002df ]

CONFIG_DEBUG_SG highlights that get_{report,ext_report,derived_key)()}
are passing stack buffers as the @req_buf argument to
handle_guest_request(), generating a Call Trace of the following form:

    WARNING: CPU: 0 PID: 1175 at include/linux/scatterlist.h:187 enc_dec_message+0x518/0x5b0 [sev_guest]
    [..]
    Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
    RIP: 0010:enc_dec_message+0x518/0x5b0 [sev_guest]
    Call Trace:
     <TASK>
    [..]
     handle_guest_request+0x135/0x520 [sev_guest]
     get_ext_report+0x1ec/0x3e0 [sev_guest]
     snp_guest_ioctl+0x157/0x200 [sev_guest]

Note that the above Call Trace was with the DEBUG_SG BUG_ON()s converted
to WARN_ON()s.

This is benign as long as there are no hardware crypto accelerators
loaded for the aead cipher, and no subsequent dma_map_sg() is performed
on the scatterlist. However, sev-guest can not assume the presence of
an aead accelerator nor can it assume that CONFIG_DEBUG_SG is disabled.

Resolve this bug by allocating virt_addr_valid() memory, similar to the
other buffers am @snp_dev instance carries, to marshal requests from
user buffers to kernel buffers.

Reported-by: Peter Gonda <pgonda@google.com>
Closes: http://lore.kernel.org/r/CAMkAt6r2VPPMZ__SQfJse8qWsUyYW3AgYbOUVM0S_Vtk=KvkxQ@mail.gmail.com
Fixes: fce96cf04430 ("virt: Add SEV-SNP guest driver")
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Dionna Glaze <dionnaglaze@google.com>
Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/sev: Change snp_guest_issue_request()'s fw_err argument

[ Upstream commit 0144e3b85d7b42e8a4cda991c0e81f131897457a ]

The GHCB specification declares that the firmware error value for
a guest request will be stored in the lower 32 bits of EXIT_INFO_2.  The
upper 32 bits are for the VMM's own error code. The fw_err argument to
snp_guest_issue_request() is thus a misnomer, and callers will need
access to all 64 bits.

The type of unsigned long also causes problems, since sw_exit_info2 is
u64 (unsigned long long) vs the argument's unsigned long*. Change this
type for issuing the guest request. Pass the ioctl command struct's error
field directly instead of in a local variable, since an incomplete guest
request may not set the error code, and uninitialized stack memory would
be written back to user space.

The firmware might not even be called, so bookend the call with the no
firmware call error and clear the error.

Since the "fw_err" field is really exitinfo2 split into the upper bits'
vmm error code and lower bits' firmware error code, convert the 64 bit
value to a union.

  [ bp:
   - Massage commit message
   - adjust code
   - Fix a build issue as
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303070609.vX6wp2Af-lkp@intel.com
   - print exitinfo2 in hex
   Tom:
    - Correct -EIO exit case. ]

Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230214164638.1189804-5-dionnaglaze@google.com
Link: https://lore.kernel.org/r/20230307192449.24732-12-bp@alien8.de
Stable-dep-of: db10cb9b5746 ("virt: sevguest: Fix passing a stack buffer as a scatterlist target")
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Name -1 return value as SEV_RET_NO_FW_CALL

[ Upstream commit efb339a83368ab25de1a18c0fdff85e01c13a1ea ]

The PSP can return a "firmware error" code of -1 in circumstances where
the PSP has not actually been called. To make this protocol unambiguous,
name the value SEV_RET_NO_FW_CALL.

  [ bp: Massage a bit. ]

Signed-off-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20221207010210.2563293-2-dionnaglaze@google.com
Stable-dep-of: db10cb9b5746 ("virt: sevguest: Fix passing a stack buffer as a scatterlist target")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/mem: Fix shutdown order

[ Upstream commit 88d3917f82ed4215a2154432c26de1480a61b209 ]

Ira reports that removing cxl_mock_mem causes a crash with the following
trace:

 BUG: kernel NULL pointer dereference, address: 0000000000000044
 [..]
 RIP: 0010:cxl_region_decode_reset+0x7f/0x180 [cxl_core]
 [..]
 Call Trace:
  <TASK>
  cxl_region_detach+0xe8/0x210 [cxl_core]
  cxl_decoder_kill_region+0x27/0x40 [cxl_core]
  cxld_unregister+0x29/0x40 [cxl_core]
  devres_release_all+0xb8/0x110
  device_unbind_cleanup+0xe/0x70
  device_release_driver_internal+0x1d2/0x210
  bus_remove_device+0xd7/0x150
  device_del+0x155/0x3e0
  device_unregister+0x13/0x60
  devm_release_action+0x4d/0x90
  ? __pfx_unregister_port+0x10/0x10 [cxl_core]
  delete_endpoint+0x121/0x130 [cxl_core]
  devres_release_all+0xb8/0x110
  device_unbind_cleanup+0xe/0x70
  device_release_driver_internal+0x1d2/0x210
  bus_remove_device+0xd7/0x150
  device_del+0x155/0x3e0
  ? lock_release+0x142/0x290
  cdev_device_del+0x15/0x50
  cxl_memdev_unregister+0x54/0x70 [cxl_core]

This crash is due to the clearing out the cxl_memdev's driver context
(@cxlds) before the subsystem is done with it. This is ultimately due to
the region(s), that this memdev is a member, being torn down and expecting
to be able to de-reference @cxlds, like here:

static int cxl_region_decode_reset(struct cxl_region *cxlr, int count)
...
                if (cxlds->rcd)
                        goto endpoint_reset;
...

Fix it by keeping the driver context valid until memdev-device
unregistration, and subsequently the entire stack of related
dependencies, unwinds.

Fixes: 9cc238c7a526 ("cxl/pci: Introduce cdevm_file_operations")
Reported-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i3c: Fix potential refcount leak in i3c_master_register_new_i3c_devs

[ Upstream commit cab63f64887616e3c4e31cfd8103320be6ebc8d3 ]

put_device() needs to be called on failure of device_register()
to give up the reference initialized in it to avoid refcount leak.

Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20230921082410.25548-1-dinghao.liu@zju.edu.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p/net: fix possible memory leak in p9_check_errors()

[ Upstream commit ce07087964208eee2ca2f9ee4a98f8b5d9027fe6 ]

When p9pdu_readf() is called with "s?d" attribute, it allocates a pointer
that will store a string. But when p9pdu_readf() fails while handling "d"
then this pointer will not be freed in p9_check_errors().

Fixes: 51a87c552dfd ("9p: rework client code to use new protocol support functions")
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Message-ID: <20231027030302.11927-1-hbh25y@gmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf hist: Add missing puts to hist__account_cycles

[ Upstream commit c1149037f65bcf0334886180ebe3d5efcf214912 ]

Caught using reference count checking on perf top with
"--call-graph=lbr". After this no memory leaks were detected.

Fixes: 57849998e2cd ("perf report: Add processing for cycle histograms")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf machine: Avoid out of bounds LBR memory read

[ Upstream commit ab8ce150781d326c6bfbe1e09f175ffde1186f80 ]

Running perf top with address sanitizer and "--call-graph=lbr" fails
due to reading sample 0 when no samples exist. Add a guard to prevent
this.

Fixes: e2b23483eb1d ("perf machine: Factor out lbr_callchain_add_lbr_ip()")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: xhci-plat: fix possible kernel oops while resuming

[ Upstream commit a5f928db59519a15e82ecba4ae3e7cbf5a44715a ]

If this driver enables the xHC clocks while resuming from sleep, it calls
clk_prepare_enable() without checking for errors and blithely goes on to
read/write the xHC's registers -- which, with the xHC not being clocked,
at least on ARM32 usually causes an imprecise external abort exceptions
which cause kernel oops.  Currently, the chips for which the driver does
the clock dance on suspend/resume seem to be the Broadcom STB SoCs, based
on ARM32 CPUs, as it seems...

Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.

Fixes: 8bd954c56197 ("usb: host: xhci-plat: suspend and resume clocks")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-19-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xhci: Loosen RPM as default policy to cover for AMD xHC 1.1

[ Upstream commit 4baf1218150985ee3ab0a27220456a1f027ea0ac ]

The AMD USB host controller (1022:43f7) isn't going into PCI D3 by default
without anything connected. This is because the policy that was introduced
by commit a611bf473d1f ("xhci-pci: Set runtime PM as default policy on all
xHC 1.2 or later devices") only covered 1.2 or later.

The 1.1 specification also has the same requirement as the 1.2
specification for D3 support. So expand the runtime PM as default policy
to all AMD 1.1 devices as well.

Fixes: a611bf473d1f ("xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices")
Link: https://composter.com.ua/documents/xHCI_Specification_for_USB.pdf
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-15-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: fix potential memory leak in init_cpu_associativity()

[ Upstream commit 95f1a128cd728a7257d78e868f1f5a145fc43736 ]

If the vcpu_associativity alloc memory successfully but the
pcpu_associativity fails to alloc memory, the vcpu_associativity
memory leaks.

Fixes: d62c8deeb6e6 ("powerpc/pseries: Provide vcpu dispatch statistics")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1671003983-10794-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/imc-pmu: Use the correct spinlock initializer.

[ Upstream commit 007240d59c11f87ac4f6cfc6a1d116630b6b634c ]

The macro __SPIN_LOCK_INITIALIZER() is implementation specific. Users
that desire to initialize a spinlock in a struct must use
__SPIN_LOCK_UNLOCKED().

Use __SPIN_LOCK_UNLOCKED() for the spinlock_t in imc_global_refc.

Fixes: 76d588dddc459 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230309134831.Nz12nqsU@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/vas: Limit open window failure messages in log bufffer

[ Upstream commit 73b25505ce043b561028e5571d84dc82aa53c2b4 ]

The VAS open window call prints error message and returns -EBUSY
after the migration suspend event initiated and until the resume
event completed on the destination system. It can cause the log
buffer filled with these error messages if the user space issues
continuous open window calls.  Similar case even for DLPAR CPU
remove event when no credits are available until the credits are
freed or with the other DLPAR CPU add event.

So changes in the patch to use pr_err_ratelimited() instead of
pr_err() to display open window failure and not-available credits
error messages.

Use pr_fmt() and make the corresponding changes to have the
consistencein prefix all pr_*() messages (vas-api.c).

Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Use "vas-api" as the prefix to match the file name.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231019215033.1335251-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/xive: Fix endian conversion size

[ Upstream commit ff7a60ab1e065257a0e467c13b519f4debcd7fcf ]

Sparse reports a size mismatch in the endian swap. The Opal
implementation[1] passes the value as a __be64, and the receiving
variable out_qsize is a u64, so the use of be32_to_cpu() appears to be
an error.

[1]: https://github.com/open-power/skiboot/blob/80e2b1dc73/hw/xive.c#L3854

Fixes: 88ec6b93c8e7 ("powerpc/xive: add OPAL extensions for the XIVE native exploitation support")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-2-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/40x: Remove stale PTE_ATOMIC_UPDATES macro

[ Upstream commit cc8ee288f484a2a59c01ccd4d8a417d6ed3466e3 ]

40x TLB handlers were reworked by commit 2c74e2586bb9 ("powerpc/40x:
Rework 40x PTE access and TLB miss") to not require PTE_ATOMIC_UPDATES
anymore.

Then commit 4e1df545e2fa ("powerpc/pgtable: Drop PTE_ATOMIC_UPDATES")
removed all code related to PTE_ATOMIC_UPDATES.

Remove left over PTE_ATOMIC_UPDATES macro.

Fixes: 2c74e2586bb9 ("powerpc/40x: Rework 40x PTE access and TLB miss")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/f061db5857fcd748f84a6707aad01754686ce97e.1695659959.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: fix ishtp MODULE_DEVICE_TABLE built on big-endian host

[ Upstream commit ac96a15a0f0c8812a3aaa587b871cd5527f6d736 ]

When MODULE_DEVICE_TABLE(ishtp, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().

For example, see a case where drivers/platform/x86/intel/ishtp_eclite.c
is built as a module for x86.

If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:

    $ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
    MODULE_ALIAS("ishtp:{6A19CC4B-D760-4DE3-B14D-F25EBD0FBCD9}");

However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:

    $ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
    MODULE_ALIAS("ishtp:{BD0FBCD9-F25E-B14D-4DE3-D7606A19CC4B}");

This issue has been unnoticed because the x86 kernel is most likely built
natively on an x86 host.

The guid field must not be reversed because guid_t is an array of __u8.

Fixes: fa443bc3c1e4 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: fix tee MODULE_DEVICE_TABLE built on big-endian host

[ Upstream commit 7f54e00e5842663c2cea501bbbdfa572c94348a3 ]

When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().

For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.

If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:

    $ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
    MODULE_ALIAS("tee:ab7a617c-b8e7-4d8f-8301-d09b61036b64*");

However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:

    $ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
    MODULE_ALIAS("tee:646b0361-9bd0-0183-8f4d-e7b87c617aab*");

The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.

This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).

The uuid field must not be reversed because uuid_t is an array of __u8.

Fixes: 0fc1db9d1059 ("tee: add bus driver framework for TEE based devices")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: Only define __parse_fpscr() when required

[ Upstream commit c7e0d9bb9154c6e6b2ac8746faba27b53393f25e ]

Clang 17 reports:

arch/powerpc/kernel/traps.c:1167:19: error: unused function '__parse_fpscr' [-Werror,-Wunused-function]

__parse_fpscr() is called from two sites. First call is guarded
by #ifdef CONFIG_PPC_FPU_REGS

Second call is guarded by CONFIG_MATH_EMULATION which selects
CONFIG_PPC_FPU_REGS.

So only define __parse_fpscr() when CONFIG_PPC_FPU_REGS is defined.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309210327.WkqSd5Bq-lkp@intel.com/
Fixes: b6254ced4da6 ("powerpc/signal: Don't manage floating point regs when no FPU")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5de2998c57f3983563b27b39228ea9a7229d4110.1695385984.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8350: Set ACV enable_mask

[ Upstream commit df1b8356a80ab47a7623e08facf36fe434ea9722 ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: d26a56674497 ("interconnect: qcom: Add SM8350 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-11-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8350: Retire DEFINE_QBCM

[ Upstream commit edd13c04ff0d90ed152902a88f01f466c77a0cf9 ]

The struct definition macros are hard to read and compare, expand them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-19-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: df1b8356a80a ("interconnect: qcom: sm8350: Set ACV enable_mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8150: Set ACV enable_mask

[ Upstream commit 7ed42176406e5a2c9a5767d0d75690c7d1588027 ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: a09b817c8bad ("interconnect: qcom: Add SM8150 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-9-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8150: Retire DEFINE_QBCM

[ Upstream commit 670699a4225b8cba6962f965b227e0175d09ecda ]

The struct definition macros are hard to read and compare, expand them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-17-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: 7ed42176406e ("interconnect: qcom: sm8150: Set ACV enable_mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8150: Drop IP0 interconnects

[ Upstream commit a532439199369b86cf7323f84d1946b7d0634c53 ]

Similar to the sdx55 and sc7180, let's drop the MASTER_IPA_CORE and
SLAVE_IPA_CORE interconnects for this platform. There are no actual users
of this interconnect. The IP0 resource will be handled by clk-rpmh
driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230109002935.244320-5-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: 7ed42176406e ("interconnect: qcom: sm8150: Set ACV enable_mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: move ignore_list out of of_count_icc_providers()

[ Upstream commit 88387e21d224923eaa0074e3eef699a30f437e62 ]

Move the const ignore_list definition out of the
of_count_icc_providers() function. This prevents the following stack
frame size warnings if the list is expanded:

drivers/interconnect/core.c:1082:12: warning: stack frame size (1216) exceeds limit (1024) in 'of_count_icc_providers' [-Wframe-larger-than]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230109002935.244320-4-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: 7ed42176406e ("interconnect: qcom: sm8150: Set ACV enable_mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm6350: Set ACV enable_mask

[ Upstream commit fe7a3abf4111992af3de51d22383a8e8a0affe1e ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 6a6eff73a954 ("interconnect: qcom: Add SM6350 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-8-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm6350: Retire DEFINE_QBCM

[ Upstream commit ab2c1cb5740a7d2240b40b7b494700078db4eb13 ]

The struct definition macros are hard to read and compare, expand them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-16-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: fe7a3abf4111 ("interconnect: qcom: sm6350: Set ACV enable_mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sdm845: Set ACV enable_mask

[ Upstream commit f8fe97a9fd2098de0570387029065eef657d50ee ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: b5d2f741077a ("interconnect: qcom: Add sdm845 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-7-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sdm845: Retire DEFINE_QBCM

[ Upstream commit 35f490c5e4e833e81be464d89404b26ee20740ef ]

The struct definition macros are hard to read and compare, expand them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-13-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: f8fe97a9fd20 ("interconnect: qcom: sdm845: Set ACV enable_mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sc8280xp: Set ACV enable_mask

[ Upstream commit 688ffb3dcf85fc4b7ea82af842493013747a9e2c ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: f29dabda7917 ("interconnect: qcom: Add SC8280XP interconnect provider")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-5-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sc8180x: Set ACV enable_mask

[ Upstream commit 0fcaaed3ff4b99e5b688b799f48989f1e4bb8a8b ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 9c8c6bac1ae8 ("interconnect: qcom: Add SC8180x providers")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-4-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sc7280: Set ACV enable_mask

[ Upstream commit 437b8e7fcd5df792cb8b8095e9f6eccefec6c099 ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 46bdcac533cc ("interconnect: qcom: Add SC7280 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-3-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sc7180: Set ACV enable_mask

[ Upstream commit 1ad83c4792722fe134c1352591420702ff7b9091 ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 2d1f95ab9feb ("interconnect: qcom: Add SC7180 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-2-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sc7180: Retire DEFINE_QBCM

[ Upstream commit e451b2ea5a11fb3f6d83e1f834ae6a5f55a02bba ]

The struct definition macros are hard to read and compare, expand them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-11-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: 1ad83c479272 ("interconnect: qcom: sc7180: Set ACV enable_mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to initialize map.m_pblk in f2fs_precache_extents()

[ Upstream commit 8b07c1fb0f1ad139373c8253f2fad8bc43fab07d ]

Otherwise, it may print random physical block address in tracepoint
of f2fs_map_blocks() as below:

f2fs_map_blocks: dev = (253,16), ino = 2297, file offset = 0, start blkaddr = 0xa356c421, len = 0x0, flags = 0

Fixes: c4020b2da4c9 ("f2fs: support F2FS_IOC_PRECACHE_EXTENTS")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: pxa_dma: Remove an erroneous BUG_ON() in pxad_free_desc()

[ Upstream commit 83c761f568733277ce1f7eb9dc9e890649c29a8c ]

If pxad_alloc_desc() fails on the first dma_pool_alloc() call, then
sw_desc->nb_desc is zero.
In such a case pxad_free_desc() is called and it will BUG_ON().

Remove this erroneous BUG_ON().

It is also useless, because if "sw_desc->nb_desc == 0", then, on the first
iteration of the for loop, i is -1 and the loop will not be executed.
(both i and sw_desc->nb_desc are 'int')

Fixes: a57e16cf0333 ("dmaengine: pxa: add pxa dmaengine driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c8fc5563c9593c914fde41f0f7d1489a21b45a9a.1696676782.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: usbip: fix stub_dev hub disconnect

[ Upstream commit 97475763484245916735a1aa9a3310a01d46b008 ]

If a hub is disconnected that has device(s) that's attached to the usbip layer
the disconnect function might fail because it tries to release the port
on an already disconnected hub.

Fixes: 6080cd0e9239 ("staging: usbip: claim ports used by shared devices")
Signed-off-by: Jonas Blixt <jonas.blixt@actia.se>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230615092810.1215490-1-jonas.blixt@actia.se
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools: iio: iio_generic_buffer ensure alignment

[ Upstream commit 2d3dff577dd0ea8fe9637a13822f7603c4a881c8 ]

The iio_generic_buffer can return garbage values when the total size of
scan data is not a multiple of the largest element in the scan. This can be
demonstrated by reading a scan, consisting, for example of one 4-byte and
one 2-byte element, where the 4-byte element is first in the buffer.

The IIO generic buffer code does not take into account the last two
padding bytes that are needed to ensure that the 4-byte data for next
scan is correctly aligned.

Add the padding bytes required to align the next sample with the scan size.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: e58537ccce73 ("staging: iio: update example application.")
Link: https://lore.kernel.org/r/ZRvlm4ktNLu+qmlf@dc78bmyyyyyyyyyyyyydt-3.rev.dnainternet.fi
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: st_core: Do not call kfree_skb() under spin_lock_irqsave()

[ Upstream commit 4d08c3d12b61022501989f9f071514d2d6f77c47 ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
spin_lock_irqsave(). Compile tested only.

Fixes: 53618cc1e51e ("Staging: sources for ST core")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230823035020.1281892-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ti: edma: handle irq_of_parse_and_map() errors

[ Upstream commit 14f6d317913f634920a640e9047aa2e66f5bdcb7 ]

Zero is not a valid IRQ for in-kernel code and the irq_of_parse_and_map()
function returns zero on error.  So this check for valid IRQs should only
accept values > 0.

Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/f15cb6a7-8449-4f79-98b6-34072f04edbc@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: chipidea: Simplify Tegra DMA alignment code

[ Upstream commit 2ae61a2562c0d1720545b0845829a65fb6a9c2c6 ]

The USB host on Tegra3 works with 32-bit alignment. Previous code tried
to align the buffer, but it did align the wrapper struct instead, so
the buffer was at a constant offset of 8 bytes (two pointers) from
expected alignment.  Since kmalloc() guarantees at least 8-byte
alignment already, the alignment-extending is removed.

Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/a0d917d492b1f91ee0019e68b8e8bca9c585393f.1695934946.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: chipidea: Fix DMA overwrite for Tegra

[ Upstream commit 7ab8716713c931ac79988f2592e1cf8b2e4fec1b ]

Tegra USB controllers seem to issue DMA in full 32-bit words only and thus
may overwrite unevenly-sized buffers.  One such occurrence is detected by
SLUB when receiving a reply to a 1-byte buffer (below).  Fix this by
allocating a bounce buffer also for buffers with sizes not a multiple of 4.

=============================================================================
BUG kmalloc-64 (Tainted: G    B             ): kmalloc Redzone overwritten
-----------------------------------------------------------------------------

0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc
Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41
 __kmem_cache_alloc_node+0x12f/0x1e4
 __kmalloc+0x33/0x8c
 usb_get_status+0x2b/0xac
 hub_probe+0x5e9/0xcec
 usb_probe_interface+0xbf/0x21c
 really_probe+0xa5/0x2c4
 __driver_probe_device+0x75/0x174
 driver_probe_device+0x31/0x94
 __device_attach_driver+0x65/0xc0
 bus_for_each_drv+0x4b/0x74
 __device_attach+0x69/0x120
 bus_probe_device+0x65/0x6c
 device_add+0x48b/0x5f8
 usb_set_configuration+0x37b/0x6b4
 usb_generic_driver_probe+0x37/0x68
 usb_probe_device+0x35/0xb4
Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0)
Object 0x8555cd00 @offset=3328 fp=0x00000000

Redzone  8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555cd40: cc cc cc cc                                      ....
Padding  8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a              ZZZZZZZZZZZZ
CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G    B              6.6.0-rc1mq-00118-g59786f827ea1 #1115
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: usb_hub_wq hub_event
[<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14)
[<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c)
[<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4)
[<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290)
[<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8)
[<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128)
[<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac)
[<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec)
[<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c)
[<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4)
[<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174)
[<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94)
usb 1-1: device descriptor read/8, error -71

Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/ef8466b834c1726f5404c95c3e192e90460146f8.1695934946.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: fix possible NULL pointer dereference caused by driver concurrency

[ Upstream commit ef307bc6ef04e8c1ea843231db58e3afaafa9fa6 ]

In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without
holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue():

    spin_lock_irqsave(&hsotg->lock, flags);
    ...
if (!urb->hcpriv) {
dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n");
goto out;
}
    rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv
    ...
out:
    spin_unlock_irqrestore(&hsotg->lock, flags);

When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are
concurrently executed, the NULL check of "urb->hcpriv" can be executed
before "urb->hcpriv = NULL". After urb->hcpriv is NULL, it can be used
in the function call to dwc2_hcd_urb_dequeue(), which can cause a NULL
pointer dereference.

This possible bug is found by an experimental static analysis tool
developed by myself. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency
bugs including data races and atomicity violations. The above possible
bug is reported, when my tool analyzes the source code of Linux 6.5.

To fix this possible bug, "urb->hcpriv = NULL" should be executed with
holding the lock "hsotg->lock". After using this patch, my tool never
reports the possible bug, with the kernelconfiguration allyesconfig for
x86_64. Because I have no associated hardware, I cannot test the patch
in runtime testing, and just verify it according to the code logic.

Fixes: 33ad261aa62b ("usb: dwc2: host: spinlock urb_enqueue")
Signed-off-by: Jia-Ju Bai <baijiaju@buaa.edu.cn>
Link: https://lore.kernel.org/r/20230926024404.832096-1-baijiaju@buaa.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Register dsa_bus_type before registering idxd sub-drivers

[ Upstream commit 88928addeec577386e8c83b48b5bc24d28ba97fd ]

idxd sub-drivers belong to bus dsa_bus_type. Thus, dsa_bus_type must be
registered in dsa bus init before idxd drivers can be registered.

But the order is wrong when both idxd and idxd_bus are builtin drivers.
In this case, idxd driver is compiled and linked before idxd_bus driver.
Since the initcall order is determined by the link order, idxd sub-drivers
are registered in idxd initcall before dsa_bus_type is registered
in idxd_bus initcall. idxd initcall fails:

[   21.562803] calling  idxd_init_module+0x0/0x110 @ 1
[   21.570761] Driver 'idxd' was unable to register with bus_type 'dsa' because the bus was not initialized.
[   21.586475] initcall idxd_init_module+0x0/0x110 returned -22 after 15717 usecs
[   21.597178] calling  dsa_bus_init+0x0/0x20 @ 1

To fix the issue, compile and link idxd_bus driver before idxd driver
to ensure the right registration order.

Fixes: d9e5481fca74 ("dmaengine: dsa: move dsa_bus_type out of idxd driver to standalone")
Reported-by: Michael Prinke <michael.prinke@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Lijun Pan <lijun.pan@intel.com>
Tested-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20230924162232.1409454-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf record: Fix BTF type checks in the off-cpu profiling

[ Upstream commit 0e501a65d35bf72414379fed0e31a0b6b81ab57d ]

The BTF func proto for a tracepoint has one more argument than the
actual tracepoint function since it has a context argument at the
begining.  So it should compare to 5 when the tracepoint has 4
arguments.

  typedef void (*btf_trace_sched_switch)(void *, bool, struct task_struct *, struct task_struct *, unsigned int);

Also, recent change in the perf tool would use a hand-written minimal
vmlinux.h to generate BTF in the skeleton.  So it won't have the info
of the tracepoint.  Anyway it should use the kernel's vmlinux BTF to
check the type in the kernel.

Fixes: b36888f71c85 ("perf record: Handle argument change in sched_switch")
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Song Liu <song@kernel.org>
Cc: Hao Luo <haoluo@google.com>
CC: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230922234444.3115821-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: renesas: rzg2l: Make reverse order of enable() for disable()

[ Upstream commit dd462cf53e4dff0f4eba5e6650e31ceddec74c6f ]

We usually do reverse order of enable() for disable(). Currently, the
ordering of irq_chip_disable_parent() is not correct in
rzg2l_gpio_irq_disable(). Fix the incorrect order.

Fixes: db2e5f21a48e ("pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO interrupt")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230918123355.262115-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

livepatch: Fix missing newline character in klp_resolve_symbols()

[ Upstream commit 67e18e132f0fd738f8c8cac3aa1420312073f795 ]

Without the newline character, the log may not be printed immediately
after the error occurs.

Fixes: ca376a937486 ("livepatch: Prevent module-specific KLP rela sections from referencing vmlinux symbols")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230914072644.4098857-1-zhengyejian1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: tty_jobctrl: fix pid memleak in disassociate_ctty()

[ Upstream commit 11e7f27b79757b6586645d87b95d5b78375ecdfc ]

There is a pid leakage:
------------------------------
unreferenced object 0xffff88810c181940 (size 224):
  comm "sshd", pid 8191, jiffies 4294946950 (age 524.570s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de  .............N..
    ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff  ....kkkk........
  backtrace:
    [<ffffffff814774e6>] kmem_cache_alloc+0x5c6/0x9b0
    [<ffffffff81177342>] alloc_pid+0x72/0x570
    [<ffffffff81140ac4>] copy_process+0x1374/0x2470
    [<ffffffff81141d77>] kernel_clone+0xb7/0x900
    [<ffffffff81142645>] __se_sys_clone+0x85/0xb0
    [<ffffffff8114269b>] __x64_sys_clone+0x2b/0x30
    [<ffffffff83965a72>] do_syscall_64+0x32/0x80
    [<ffffffff83a00085>] entry_SYSCALL_64_after_hwframe+0x61/0xc6

It turns out that there is a race condition between disassociate_ctty() and
tty_signal_session_leader(), which caused this leakage.

The pid memleak is triggered by the following race:
task[sshd]                     task[bash]
-----------------------        -----------------------
                               disassociate_ctty();
                               spin_lock_irq(&current->sighand->siglock);
                               put_pid(current->signal->tty_old_pgrp);
                               current->signal->tty_old_pgrp = NULL;
                               tty = tty_kref_get(current->signal->tty);
                               spin_unlock_irq(&current->sighand->siglock);
tty_vhangup();
tty_lock(tty);
...
tty_signal_session_leader();
spin_lock_irq(&p->sighand->siglock);
...
if (tty->ctrl.pgrp) //tty->ctrl.pgrp is not NULL
p->signal->tty_old_pgrp = get_pid(tty->ctrl.pgrp); //An extra get
spin_unlock_irq(&p->sighand->siglock);
...
tty_unlock(tty);
                               if (tty) {
                                   tty_lock(tty);
                                   ...
                                   put_pid(tty->ctrl.pgrp);
                                   tty->ctrl.pgrp = NULL; //It's too late
                                   ...
                                   tty_unlock(tty);
                               }

The issue is believed to be introduced by commit c8bcd9c5be24 ("tty:
Fix ->session locking") who moves the unlock of siglock in
disassociate_ctty() above "if (tty)", making a small window allowing
tty_signal_session_leader() to kick in. It can be easily reproduced by
adding a delay before "if (tty)" and at the entrance of
tty_signal_session_leader().

To fix this issue, we move "put_pid(current->signal->tty_old_pgrp)" after
"tty->ctrl.pgrp = NULL".

Fixes: c8bcd9c5be24 ("tty: Fix ->session locking")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Co-developed-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20230831023329.165737-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: compress: fix to avoid redundant compress extension

[ Upstream commit 7e1b150fece033703a824df1bbc03df091ea53cc ]

With below script, redundant compress extension will be parsed and added
by parse_options(), because parse_options() doesn't check whether the
extension is existed or not, fix it.

1. mount -t f2fs -o compress_extension=so /dev/vdb /mnt/f2fs
2. mount -t f2fs -o remount,compress_extension=so /mnt/f2fs
3. mount|grep f2fs

/dev/vdb on /mnt/f2fs type f2fs (...,compress_extension=so,compress_extension=so,...)

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Fixes: 151b1982be5d ("f2fs: compress: add nocompress extensions support")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: compress: fix to avoid use-after-free on dic

[ Upstream commit b0327c84e91a0f4f0abced8cb83ec86a7083f086 ]

Call trace:
 __memcpy+0x128/0x250
 f2fs_read_multi_pages+0x940/0xf7c
 f2fs_mpage_readpages+0x5a8/0x624
 f2fs_readahead+0x5c/0x110
 page_cache_ra_unbounded+0x1b8/0x590
 do_sync_mmap_readahead+0x1dc/0x2e4
 filemap_fault+0x254/0xa8c
 f2fs_filemap_fault+0x2c/0x104
 __do_fault+0x7c/0x238
 do_handle_mm_fault+0x11bc/0x2d14
 do_mem_abort+0x3a8/0x1004
 el0_da+0x3c/0xa0
 el0t_64_sync_handler+0xc4/0xec
 el0t_64_sync+0x1b4/0x1b8

In f2fs_read_multi_pages(), once f2fs_decompress_cluster() was called if
we hit cached page in compress_inode's cache, dic may be released, it needs
break the loop rather than continuing it, in order to avoid accessing
invalid dic pointer.

Fixes: 6ce19aff0b8c ("f2fs: compress: add compress_inode to cache compressed blocks")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: compress: fix deadloop in f2fs_write_cache_pages()

[ Upstream commit c5d3f9b7649abb20aa5ab3ebff9421a171eaeb22 ]

With below mount option and testcase, it hangs kernel.

1. mount -t f2fs -o compress_log_size=5 /dev/vdb /mnt/f2fs
2. touch /mnt/f2fs/file
3. chattr +c /mnt/f2fs/file
4. dd if=/dev/zero of=/mnt/f2fs/file bs=1MB count=1
5. sync
6. dd if=/dev/zero of=/mnt/f2fs/file bs=111 count=11 conv=notrunc
7. sync

INFO: task sync:4788 blocked for more than 120 seconds.
      Not tainted 6.5.0-rc1+ #322
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:sync            state:D stack:0     pid:4788  ppid:509    flags:0x00000002
Call Trace:
 <TASK>
 __schedule+0x335/0xf80
 schedule+0x6f/0xf0
 wb_wait_for_completion+0x5e/0x90
 sync_inodes_sb+0xd8/0x2a0
 sync_inodes_one_sb+0x1d/0x30
 iterate_supers+0x99/0xf0
 ksys_sync+0x46/0xb0
 __do_sys_sync+0x12/0x20
 do_syscall_64+0x3f/0x90
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

The reason is f2fs_all_cluster_page_ready() assumes that pages array should
cover at least one cluster, otherwise, it will always return false, result
in deadloop.

By default, pages array size is 16, and it can cover the case cluster_size
is equal or less than 16, for the case cluster_size is larger than 16, let's
allocate memory of pages array dynamically.

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>