mmc: sdhci: Rename SDHCI_ACMD12_ERR and SDHCI_INT_ACMD12ERR

[ Upstream commit 869f8a69bb3a4aec4eb914a330d4ba53a9eed495 ]

The SDHCI_ACMD12_ERR register is used for auto-CMD23 and auto-CMD12
errors, as is the SDHCI_INT_ACMD12ERR interrupt bit. Rename them to
SDHCI_AUTO_CMD_STATUS and SDHCI_INT_AUTO_CMD_ERR respectively.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci: Fix data command CRC error handling

[ Upstream commit 4bf780996669280171c9cd58196512849b93434e ]

Existing data command CRC error handling is non-standard and does not work
with some Intel host controllers. Specifically, the assumption that the host
controller will continue operating normally after the error interrupt,
is not valid. Change the driver to handle the error in the same manner
as a data CRC error, taking care to ensure that the data line reset is
done for single or multi-block transfers, and it is done before
unmapping DMA.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfit/ars: Avoid stale ARS results

commit 78153dd45e7e0596ba32b15d02bda08e1513111e upstream.

Gate ARS result consumption on whether the OS issued start-ARS since the
previous consumption. The BIOS may only clear its result buffers after a
successful start-ARS.

Fixes: 0caeef63e6d2 ("libnvdimm: Add a poison list and export badblocks")
Cc: <stable@vger.kernel.org>
Reported-by: Krzysztof Rusocki <krzysztof.rusocki@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfit/ars: Allow root to busy-poll the ARS state machine

commit 5479b2757f26fe9908fc341d105b2097fe820b6f upstream.

The ARS implementation implements exponential back-off on the poll
interval to prevent high-frequency access to the DIMM / platform
interface. Depending on when the ARS completes the poll interval may
exceed the completion event by minutes. Allow root to reset the timeout
each time it probes the status. A one-second timeout is still enforced,
but root can otherwise can control the poll interval.

Fixes: bc6ba8085842 ("nfit, address-range-scrub: rework and simplify ARS...")
Cc: <stable@vger.kernel.org>
Reported-by: Erwin Tsaur <erwin.tsaur@oracle.com>
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfit/ars: Introduce scrub_flags

commit e34b8252a3d2893ca55c82dbfcdaa302fa03d400 upstream.

In preparation for introducing new flags to gate whether ARS results are
stale, or poll the completion state, convert the existing flags to an
unsigned long with enumerated values. This conversion allows the flags
to be atomically updated outside of ->init_mutex.

Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfit/ars: Remove ars_start_flags

commit 317a992ab9266b86b774b9f6b0f87eb4f59879a1 upstream.

The ars_start_flags property of 'struct acpi_nfit_desc' is no longer
used since ARS_REQ_SHORT and ARS_REQ_LONG were added.

Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

timers/sched_clock: Prevent generic sched_clock wrap caused by tick_freeze()

commit 3f2552f7e9c5abef2775c53f7af66532f8bf65bc upstream.

tick_freeze() introduced by suspend-to-idle in commit 124cf9117c5f ("PM /
sleep: Make it possible to quiesce timers during suspend-to-idle") uses
timekeeping_suspend() instead of syscore_suspend() during
suspend-to-idle. As a consequence generic sched_clock will keep going
because sched_clock_suspend() and sched_clock_resume() are not invoked
during suspend-to-idle which can result in a generic sched_clock wrap.

On a ARM system with suspend-to-idle enabled, sched_clock is registered
as "56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns", which
means the real wrapping duration is 8796093022202ns.

[  134.551779] suspend-to-idle suspend (timekeeping_suspend())
[ 1204.912239] suspend-to-idle resume (timekeeping_resume())
......
[ 1206.912239] suspend-to-idle suspend (timekeeping_suspend())
[ 5880.502807] suspend-to-idle resume (timekeeping_resume())
......
[ 6000.403724] suspend-to-idle suspend (timekeeping_suspend())
[ 8035.753167] suspend-to-idle resume  (timekeeping_resume())
......
[ 8795.786684] (2)[321:charger_thread]......
[ 8795.788387] (2)[321:charger_thread]......
[    0.057226] (0)[0:swapper/0]......
[    0.061447] (2)[0:swapper/2]......

sched_clock was not stopped during suspend-to-idle, and sched_clock_poll
hrtimer was not expired because timekeeping_suspend() was invoked during
suspend-to-idle. It makes sched_clock wrap at kernel time 8796s.

To prevent this, invoke sched_clock_suspend() and sched_clock_resume() in
tick_freeze() together with timekeeping_suspend() and timekeeping_resume().

Fixes: 124cf9117c5f (PM / sleep: Make it possible to quiesce timers during suspend-to-idle)
Signed-off-by: Chang-An Chen <chang-an.chen@mediatek.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Corey Minyard <cminyard@mvista.com>
Cc: <linux-mediatek@lists.infradead.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: <kuohong.wang@mediatek.com>
Cc: <freddy.hsin@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1553828349-8914-1-git-send-email-chang-an.chen@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Prevent deadlock on ssb_state::lock

commit 2f5fb19341883bb6e37da351bc3700489d8506a7 upstream.

Mikhail reported a lockdep splat related to the AMD specific ssb_state
lock:

  CPU0                       CPU1
  lock(&st->lock);
                             local_irq_disable();
                             lock(&(&sighand->siglock)->rlock);
                             lock(&st->lock);
  <Interrupt>
     lock(&(&sighand->siglock)->rlock);

  *** DEADLOCK ***

The connection between sighand->siglock and st->lock comes through seccomp,
which takes st->lock while holding sighand->siglock.

Make sure interrupts are disabled when __speculation_ctrl_update() is
invoked via prctl() -> speculation_ctrl_update(). Add a lockdep assert to
catch future offenders.

Fixes: 1f50ddb4f418 ("x86/speculation: Handle HT correctly on AMD")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1904141948200.4917@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86: Fix incorrect PEBS_REGS

commit 9d5dcc93a6ddfc78124f006ccd3637ce070ef2fc upstream.

PEBS_REGS used as mask for the supported registers for large PEBS.
However, the mask cannot filter the sample_regs_user/sample_regs_intr
correctly.

(1ULL << PERF_REG_X86_*) should be used to replace PERF_REG_X86_*, which
is only the index.

Rename PEBS_REGS to PEBS_GP_REGS, because the mask is only for general
purpose registers.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Fixes: 2fe1bc1f501d ("perf/x86: Enable free running PEBS for REGS_USER/INTR")
Link: https://lkml.kernel.org/r/20190402194509.2832-2-kan.liang@linux.intel.com
[ Renamed it to PEBS_GP_REGS - as 'GPRS' is used elsewhere ;-) ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu/bugs: Use __initconst for 'const' init data

commit 1de7edbb59c8f1b46071f66c5c97b8a59569eb51 upstream.

Some of the recently added const tables use __initdata which causes section
attribute conflicts.

Use __initconst instead.

Fixes: fa1202ef2243 ("x86/speculation: Add command line control")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190330004743.29541-9-andi@firstfloor.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/amd: Add event map for AMD Family 17h

commit 3fe3331bb285700ab2253dbb07f8e478fcea2f1b upstream.

Family 17h differs from prior families by:

 - Does not support an L2 cache miss event
 - It has re-enumerated PMC counters for:
   - L2 cache references
   - front & back end stalled cycles

So we add a new amd_f17h_perfmon_event_map[] so that the generic
perf event names will resolve to the correct h/w events on
family 17h and above processors.

Reference sections 2.1.13.3.3 (stalls) and 2.1.13.3.6 (L2):

  https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: e40ed1542dd7 ("perf/x86: Add perf support for AMD family-17h processors")
[ Improved the formatting a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/gmc9: fix VM_L2_CNTL3 programming

commit 1925e7d3d4677e681cc2e878c2bdbeaee988c8e2 upstream.

Got accidently dropped when 2+1 level support was added.

Fixes: 6a42fd6fbf534096 ("drm/amdgpu: implement 2+1 PD support for Raven v3")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: do not call driver wake_tx_queue op during reconfig

commit 4856bfd230985e43e84c26473c91028ff0a533bd upstream.

There are several scenarios in which mac80211 can call drv_wake_tx_queue
after ieee80211_restart_hw has been called and has not yet completed.
Driver private structs are considered uninitialized until mac80211 has
uploaded the vifs, stations and keys again, so using private tx queue
data during that time is not safe.

The driver can also not rely on drv_reconfig_complete to figure out when
it is safe to accept drv_wake_tx_queue calls again, because it is only
called after all tx queues are woken again.

To fix this, bail out early in drv_wake_tx_queue if local->in_reconfig
is set.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2x00: do not increment sequence number while re-transmitting

commit 746ba11f170603bf1eaade817553a6c2e9135bbe upstream.

Currently rt2x00 devices retransmit the management frames with
incremented sequence number if hardware is assigning the sequence.

This is HW bug fixed already for non-QOS data frames, but it should
be fixed for management frames except beacon.

Without fix retransmitted frames have wrong SN:

 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1648, FN=0, Flags=........C Frame is not being retransmitted 1648 1
 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1649, FN=0, Flags=....R...C Frame is being retransmitted 1649 1
 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1650, FN=0, Flags=....R...C Frame is being retransmitted 1650 1

With the fix SN stays correctly the same:

 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=........C
 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C
 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C

Cc: stable@vger.kernel.org
Signed-off-by: Vijayakumar Durai <vijayakumar.durai1@vivint.com>
[sgruszka: simplify code, change comments and changelog]
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes: Fix error check when reusing optimized probes

commit 5f843ed415581cfad4ef8fefe31c138a8346ca8a upstream.

The following commit introduced a bug in one of our error paths:

  819319fc9346 ("kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()")

it missed to handle the return value of kprobe_optready() as
error-value. In reality, the kprobe_optready() returns a bool
result, so "true" case must be passed instead of 0.

This causes some errors on kprobe boot-time selftests on ARM:

 [   ] Beginning kprobe tests...
 [   ] Probe ARM code
 [   ]     kprobe
 [   ]     kretprobe
 [   ] ARM instruction simulation
 [   ]     Check decoding tables
 [   ]     Run test cases
 [   ] FAIL: test_case_handler not run
 [   ] FAIL: Test andge r10, r11, r14, asr r7
 [   ] FAIL: Scenario 11
 ...
 [   ] FAIL: Scenario 7
 [   ] Total instruction simulation tests=1631, pass=1433 fail=198
 [   ] kprobe tests failed

This can happen if an optimized probe is unregistered and next
kprobe is registered on same address until the previous probe
is not reclaimed.

If this happens, a hidden aggregated probe may be kept in memory,
and no new kprobe can probe same address. Also, in that case
register_kprobe() will return "1" instead of minus error value,
which can mislead caller logic.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # v5.0+
Fixes: 819319fc9346 ("kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()")
Link: http://lkml.kernel.org/r/155530808559.32517.539898325433642204.stgit@devnote2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes: Mark ftrace mcount handler functions nokprobe

commit fabe38ab6b2bd9418350284c63825f13b8a6abba upstream.

Mark ftrace mcount handler functions nokprobe since
probing on these functions with kretprobe pushes
return address incorrectly on kretprobe shadow stack.

Reported-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Tested-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/155094062044.6137.6419622920568680640.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kprobes: Verify stack frame on kretprobe

commit 3ff9c075cc767b3060bdac12da72fc94dd7da1b8 upstream.

Verify the stack frame pointer on kretprobe trampoline handler,
If the stack frame pointer does not match, it skips the wrong
entry and tries to find correct one.

This can happen if user puts the kretprobe on the function
which can be used in the path of ftrace user-function call.
Such functions should not be probed, so this adds a warning
message that reports which function should be blacklisted.

Tested-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/155094059185.6137.15527904013362842072.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: futex: Restore oldval initialization to work around buggy compilers

commit ff8acf929014b7f87315588e0daf8597c8aa9d1c upstream.

Commit 045afc24124d ("arm64: futex: Fix FUTEX_WAKE_OP atomic ops with
non-zero result value") removed oldval's zero initialization in
arch_futex_atomic_op_inuser because it is not necessary. Unfortunately,
Android's arm64 GCC 4.9.4 [1] does not agree:

../kernel/futex.c: In function 'do_futex':
../kernel/futex.c:1658:17: warning: 'oldval' may be used uninitialized
in this function [-Wmaybe-uninitialized]
   return oldval == cmparg;
                 ^
In file included from ../kernel/futex.c:73:0:
../arch/arm64/include/asm/futex.h:53:6: note: 'oldval' was declared here
  int oldval, ret, tmp;
      ^

GCC fails to follow that when ret is non-zero, futex_atomic_op_inuser
returns right away, avoiding the uninitialized use that it claims.
Restoring the zero initialization works around this issue.

[1]: https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/

Cc: stable@vger.kernel.org
Fixes: 045afc24124d ("arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: fix out-of-bounds read in ttm_put_pages() v2

commit a66477b0efe511d98dde3e4aaeb189790e6f0a39 upstream.

When ttm_put_pages() tries to figure out whether it's dealing with
transparent hugepages, it just reads past the bounds of the pages array
without a check.

v2: simplify the test if enough pages are left in the array (Christian).

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 5c42c64f7d54 ("drm/ttm: fix the fix for huge compound pages")
Cc: stable@vger.kernel.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: x86/poly1305 - fix overflow during partial reduction

commit 678cce4019d746da6c680c48ba9e6d417803e127 upstream.

The x86_64 implementation of Poly1305 produces the wrong result on some
inputs because poly1305_4block_avx2() incorrectly assumes that when
partially reducing the accumulator, the bits carried from limb 'd4' to
limb 'h0' fit in a 32-bit integer.  This is true for poly1305-generic
which processes only one block at a time.  However, it's not true for
the AVX2 implementation, which processes 4 blocks at a time and
therefore can produce intermediate limbs about 4x larger.

Fix it by making the relevant calculations use 64-bit arithmetic rather
than 32-bit.  Note that most of the carries already used 64-bit
arithmetic, but the d4 -> h0 carry was different for some reason.

To be safe I also made the same change to the corresponding SSE2 code,
though that only operates on 1 or 2 blocks at a time.  I don't think
it's really needed for poly1305_block_sse2(), but it doesn't hurt
because it's already x86_64 code.  It *might* be needed for
poly1305_2block_sse2(), but overflows aren't easy to reproduce there.

This bug was originally detected by my patches that improve testmgr to
fuzz algorithms against their generic implementation.  But also add a
test vector which reproduces it directly (in the AVX2 case).

Fixes: b1ccc8f4b631 ("crypto: poly1305 - Add a four block AVX2 variant for x86_64")
Fixes: c70f4abef07a ("crypto: poly1305 - Add a SSE2 SIMD variant for x86_64")
Cc: <stable@vger.kernel.org> # v4.3+
Cc: Martin Willi <martin@strongswan.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: fix sleep-in-atomic in free_user at cleanup SRCU user->release_barrier

commit 3b9a907223d7f6b9d1dadea29436842ae9bcd76d upstream.

free_user() could be called in atomic context.

This patch pushed the free operation off into a workqueue.

Example:

 BUG: sleeping function called from invalid context at kernel/workqueue.c:2856
 in_atomic(): 1, irqs_disabled(): 0, pid: 177, name: ksoftirqd/27
 CPU: 27 PID: 177 Comm: ksoftirqd/27 Not tainted 4.19.25-3 #1
 Hardware name: AIC 1S-HV26-08/MB-DPSB04-06, BIOS IVYBV060 10/21/2015
 Call Trace:
  dump_stack+0x5c/0x7b
  ___might_sleep+0xec/0x110
  __flush_work+0x48/0x1f0
  ? try_to_del_timer_sync+0x4d/0x80
  _cleanup_srcu_struct+0x104/0x140
  free_user+0x18/0x30 [ipmi_msghandler]
  ipmi_free_recv_msg+0x3a/0x50 [ipmi_msghandler]
  deliver_response+0xbd/0xd0 [ipmi_msghandler]
  deliver_local_response+0xe/0x30 [ipmi_msghandler]
  handle_one_recv_msg+0x163/0xc80 [ipmi_msghandler]
  ? dequeue_entity+0xa0/0x960
  handle_new_recv_msgs+0x15c/0x1f0 [ipmi_msghandler]
  tasklet_action_common.isra.22+0x103/0x120
  __do_softirq+0xf8/0x2d7
  run_ksoftirqd+0x26/0x50
  smpboot_thread_fn+0x11d/0x1e0
  kthread+0x103/0x140
  ? sort_range+0x20/0x20
  ? kthread_destroy_worker+0x40/0x40
  ret_from_fork+0x1f/0x40

Fixes: 77f8269606bf ("ipmi: fix use-after-free of user->release_barrier.rda")

Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 5.0
Cc: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping

commit 04f5866e41fb70690e28397487d8bd8eea7d712a upstream.

The core dumping code has always run without holding the mmap_sem for
writing, despite that is the only way to ensure that the entire vma
layout will not change from under it.  Only using some signal
serialization on the processes belonging to the mm is not nearly enough.
This was pointed out earlier.  For example in Hugh's post from Jul 2017:

  https://lkml.kernel.org/r/alpine.LSU.2.11.1707191716030.2055@eggly.anvils

  "Not strictly relevant here, but a related note: I was very surprised
   to discover, only quite recently, how handle_mm_fault() may be called
   without down_read(mmap_sem) - when core dumping. That seems a
   misguided optimization to me, which would also be nice to correct"

In particular because the growsdown and growsup can move the
vm_start/vm_end the various loops the core dump does around the vma will
not be consistent if page faults can happen concurrently.

Pretty much all users calling mmget_not_zero()/get_task_mm() and then
taking the mmap_sem had the potential to introduce unexpected side
effects in the core dumping code.

Adding mmap_sem for writing around the ->core_dump invocation is a
viable long term fix, but it requires removing all copy user and page
faults and to replace them with get_dump_page() for all binary formats
which is not suitable as a short term fix.

For the time being this solution manually covers the places that can
confuse the core dump either by altering the vma layout or the vma flags
while it runs.  Once ->core_dump runs under mmap_sem for writing the
function mmget_still_valid() can be dropped.

Allowing mmap_sem protected sections to run in parallel with the
coredump provides some minor parallelism advantage to the swapoff code
(which seems to be safe enough by never mangling any vma field and can
keep doing swapins in parallel to the core dumping) and to some other
corner case.

In order to facilitate the backporting I added "Fixes: 86039bd3b4e6"
however the side effect of this same race condition in /proc/pid/mem
should be reproducible since before 2.6.12-rc2 so I couldn't add any
other "Fixes:" because there's no hash beyond the git genesis commit.

Because find_extend_vma() is the only location outside of the process
context that could modify the "mm" structures under mmap_sem for
reading, by adding the mmget_still_valid() check to it, all other cases
that take the mmap_sem for reading don't need the new check after
mmget_not_zero()/get_task_mm().  The expand_stack() in page fault
context also doesn't need the new check, because all tasks under core
dumping are frozen.

Link: http://lkml.kernel.org/r/20190325224949.11068-1-aarcange@redhat.com
Fixes: 86039bd3b4e6 ("userfaultfd: add new syscall to provide memory externalization")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "svm: Fix AVIC incomplete IPI emulation"

commit 4a58038b9e420276157785afa0a0bbb4b9bc2265 upstream.

This reverts commit bb218fbcfaaa3b115d4cd7a43c0ca164f3a96e57.

As Oren Twaig pointed out the old discussion:

  https://patchwork.kernel.org/patch/8292231/

that the change coud potentially cause an extra IPI to be sent to
the destination vcpu because the AVIC hardware already set the IRR bit
before the incomplete IPI #VMEXIT with id=1 (target vcpu is not running).
Since writting to ICR and ICR2 will also set the IRR. If something triggers
the destination vcpu to get scheduled before the emulation finishes, then
this could result in an additional IPI.

Also, the issue mentioned in the commit bb218fbcfaaa was misdiagnosed.

Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Oren Twaig <oren@scalemp.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO"

commit 0228034d8e5915b98c33db35a98f5e909e848ae9 upstream.

This patch clears FC_RP_STARTED flag during logoff, because of this
re-login(flogi) didn't happen to the switch.

This reverts commit 1550ec458e0cf1a40a170ab1f4c46e3f52860f65.

Fixes: 1550ec458e0c ("scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO")
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Hannes Reinecke <hare@#suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: core: set result when the command cannot be dispatched

commit be549d49115422f846b6d96ee8fd7173a5f7ceb0 upstream.

When SCSI blk-mq is enabled, there is a bug in handling errors in
scsi_queue_rq.  Specifically, the bug is not setting result field of
scsi_request correctly when the dispatch of the command has been
failed. Since the upper layer code including the sg_io ioctl expects to
receive any error status from result field of scsi_request, the error is
silently ignored and this could cause data corruptions for some
applications.

Fixes: d285203cf647 ("scsi: add support for a blk-mq based I/O path.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jaesoo Lee <jalee@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: fix cursor when clearing the screen

commit b2ecf00631362a83744e5ec249947620db5e240c upstream.

The patch a6dbe4427559 ("vt: perform safe console erase in the right
order") introduced a bug. The conditional do_update_region() was
replaced by a call to update_region() that does contain the conditional
already, but with unwanted extra side effects such as restoring the cursor
drawing.

In order to reproduce the bug:
- use framebuffer console with the AMDGPU driver
- type "links" to start the console www browser
- press 'q' and space to exit links

Now the cursor will be permanently visible in the center of the
screen. It will stay there until something overwrites it.

The bug goes away if we change update_region() back to the conditional
do_update_region().

[ nico: reworded changelog ]

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Cc: stable@vger.kernel.org
Fixes: a6dbe4427559 ("vt: perform safe console erase in the right order")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sh-sci: Fix HSCIF RX sampling point calculation

commit ace965696da2611af759f0284e26342b7b6cec89 upstream.

There are several issues with the formula used for calculating the
deviation from the intended rate:
  1. While min_err and last_stop are signed, srr and baud are unsigned.
     Hence the signed values are promoted to unsigned, which will lead
     to a bogus value of deviation if min_err is negative,
  2. Srr is the register field value, which is one less than the actual
     sampling rate factor,
  3. The divisions do not use rounding.

Fix this by casting unsigned variables to int, adding one to srr, and
using a single DIV_ROUND_CLOSEST().

Fixes: 63ba1e00f178a448 ("serial: sh-sci: Support for HSCIF RX sampling point adjustment")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sh-sci: Fix HSCIF RX sampling point adjustment

commit 6b87784b53592a90d21576be8eff688b56d93cce upstream.

The calculation of the sampling point has min() and max() exchanged.
Fix this by using the clamp() helper instead.

Fixes: 63ba1e00f178a448 ("serial: sh-sci: Support for HSCIF RX sampling point adjustment")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add hardware ID for multiple Lenovo laptops

commit 738c06d0e4562e0acf9f2c7438a22b2d5afc67aa upstream.

There are many Lenovo laptops which need elan_i2c support, this patch adds
relevant IDs to the Elan driver so that touchpads are recognized.

Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: core: Fix card races between register and disconnect

commit 2a3f7221acddfe1caa9ff09b3a8158c39b2fdeac upstream.

There is a small race window in the card disconnection code that
allows the registration of another card with the very same card id.
This leads to a warning in procfs creation as caught by syzkaller.

The problem is that we delete snd_cards and snd_cards_lock entries at
the very beginning of the disconnection procedure.  This makes the
slot available to be assigned for another card object while the
disconnection procedure is being processed.  Then it becomes possible
to issue a procfs registration with the existing file name although we
check the conflict beforehand.

The fix is simply to move the snd_cards and snd_cards_lock clearances
at the end of the disconnection procedure.  The references to these
entries are merely either from the global proc files like
/proc/asound/cards or from the card registration / disconnection, so
it should be fine to shift at the very end.

Reported-by: syzbot+48df349490c36f9f54ab@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - add two more pin configuration sets to quirk table

commit b26e36b7ef36a8a3a147b1609b2505f8a4ecf511 upstream.

We have two Dell laptops which have the codec 10ec0236 and 10ec0256
respectively, the headset mic on them can't work, need to apply the
quirk of ALC255_FIXUP_DELL1_MIC_NO_PRESENCE. So adding their pin
configurations in the pin quirk table.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_usb6501: Fix possible double-free of ->usb_rx_buf

commit af4b54a2e5ba18259ff9aac445bf546dd60d037e upstream.

`ni6501_alloc_usb_buffers()` is called from `ni6501_auto_attach()` to
allocate RX and TX buffers for USB transfers.  It allocates
`devpriv->usb_rx_buf` followed by `devpriv->usb_tx_buf`.  If the
allocation of `devpriv->usb_tx_buf` fails, it frees
`devpriv->usb_rx_buf`, leaving the pointer set dangling, and returns an
error.  Later, `ni6501_detach()` will be called from the core comedi
module code to clean up.  `ni6501_detach()` also frees both
`devpriv->usb_rx_buf` and `devpriv->usb_tx_buf`, but
`devpriv->usb_rx_buf` may have already beed freed, leading to a
double-free error.  Fix it bu removing the call to
`kfree(devpriv->usb_rx_buf)` from `ni6501_alloc_usb_buffers()`, relying
on `ni6501_detach()` to free the memory.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_usb6501: Fix use of uninitialized mutex

commit 660cf4ce9d0f3497cc7456eaa6d74c8b71d6282c upstream.

If `ni6501_auto_attach()` returns an error, the core comedi module code
will call `ni6501_detach()` to clean up.  If `ni6501_auto_attach()`
successfully allocated the comedi device private data, `ni6501_detach()`
assumes that a `struct mutex mut` contained in the private data has been
initialized and uses it.  Unfortunately, there are a couple of places
where `ni6501_auto_attach()` can return an error after allocating the
device private data but before initializing the mutex, so this
assumption is invalid.  Fix it by initializing the mutex just after
allocating the private data in `ni6501_auto_attach()` before any other
errors can be retturned.  Also move the call to `usb_set_intfdata()`
just to keep the code a bit neater (either position for the call is
fine).

I believe this was the cause of the following syzbot crash report
<https://syzkaller.appspot.com/bug?extid=cf4f2b6c24aff0a3edf6>:

usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: config 0 descriptor??
usb 1-1: string descriptor 0 read error: -71
comedi comedi0: Wrong number of endpoints
ni6501 1-1:0.233: driver 'ni6501' failed to auto-configure device.
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 585 Comm: kworker/0:3 Not tainted 5.1.0-rc4-319354-g9a33b36 #3
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xe8/0x16e lib/dump_stack.c:113
 assign_lock_key kernel/locking/lockdep.c:786 [inline]
 register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095
 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582
 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211
 __mutex_lock_common kernel/locking/mutex.c:925 [inline]
 __mutex_lock+0xfe/0x12b0 kernel/locking/mutex.c:1072
 ni6501_detach+0x5b/0x110 drivers/staging/comedi/drivers/ni_usb6501.c:567
 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204
 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156
 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline]
 comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190
 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline]
 comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880
 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068
 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361
 really_probe+0x2da/0xb10 drivers/base/dd.c:509
 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
 __device_attach+0x223/0x3a0 drivers/base/dd.c:844
 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
 device_add+0xad2/0x16e0 drivers/base/core.c:2106
 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021
 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210
 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266
 really_probe+0x2da/0xb10 drivers/base/dd.c:509
 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
 __device_attach+0x223/0x3a0 drivers/base/dd.c:844
 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
 device_add+0xad2/0x16e0 drivers/base/core.c:2106
 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534
 hub_port_connect drivers/usb/core/hub.c:5089 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
 port_event drivers/usb/core/hub.c:5350 [inline]
 hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432
 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
 kthread+0x313/0x420 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

Reported-by: syzbot+cf4f2b6c24aff0a3edf6@syzkaller.appspotmail.com
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: vmk80xx: Fix possible double-free of ->usb_rx_buf

commit 663d294b4768bfd89e529e069bffa544a830b5bf upstream.

`vmk80xx_alloc_usb_buffers()` is called from `vmk80xx_auto_attach()` to
allocate RX and TX buffers for USB transfers.  It allocates
`devpriv->usb_rx_buf` followed by `devpriv->usb_tx_buf`.  If the
allocation of `devpriv->usb_tx_buf` fails, it frees
`devpriv->usb_rx_buf`,  leaving the pointer set dangling, and returns an
error.  Later, `vmk80xx_detach()` will be called from the core comedi
module code to clean up.  `vmk80xx_detach()` also frees both
`devpriv->usb_rx_buf` and `devpriv->usb_tx_buf`, but
`devpriv->usb_rx_buf` may have already been freed, leading to a
double-free error.  Fix it by removing the call to
`kfree(devpriv->usb_rx_buf)` from `vmk80xx_alloc_usb_buffers()`, relying
on `vmk80xx_detach()` to free the memory.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: vmk80xx: Fix use of uninitialized semaphore

commit 08b7c2f9208f0e2a32159e4e7a4831b7adb10a3e upstream.

If `vmk80xx_auto_attach()` returns an error, the core comedi module code
will call `vmk80xx_detach()` to clean up.  If `vmk80xx_auto_attach()`
successfully allocated the comedi device private data,
`vmk80xx_detach()` assumes that a `struct semaphore limit_sem` contained
in the private data has been initialized and uses it.  Unfortunately,
there are a couple of places where `vmk80xx_auto_attach()` can return an
error after allocating the device private data but before initializing
the semaphore, so this assumption is invalid.  Fix it by initializing
the semaphore just after allocating the private data in
`vmk80xx_auto_attach()` before any other errors can be returned.

I believe this was the cause of the following syzbot crash report
<https://syzkaller.appspot.com/bug?extid=54c2f58f15fe6876b6ad>:

usb 1-1: config 0 has no interface number 0
usb 1-1: New USB device found, idVendor=10cf, idProduct=8068, bcdDevice=e6.8d
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: config 0 descriptor??
vmk80xx 1-1:0.117: driver 'vmk80xx' failed to auto-configure device.
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xe8/0x16e lib/dump_stack.c:113
 assign_lock_key kernel/locking/lockdep.c:786 [inline]
 register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095
 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582
 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152
 down+0x12/0x80 kernel/locking/semaphore.c:58
 vmk80xx_detach+0x59/0x100 drivers/staging/comedi/drivers/vmk80xx.c:829
 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204
 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156
 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline]
 comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190
 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline]
 comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880
 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068
 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361
 really_probe+0x2da/0xb10 drivers/base/dd.c:509
 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
 __device_attach+0x223/0x3a0 drivers/base/dd.c:844
 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
 device_add+0xad2/0x16e0 drivers/base/core.c:2106
 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021
 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210
 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266
 really_probe+0x2da/0xb10 drivers/base/dd.c:509
 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
 __device_attach+0x223/0x3a0 drivers/base/dd.c:844
 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
 device_add+0xad2/0x16e0 drivers/base/core.c:2106
 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534
 hub_port_connect drivers/usb/core/hub.c:5089 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
 port_event drivers/usb/core/hub.c:5350 [inline]
 hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432
 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
 kthread+0x313/0x420 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

Reported-by: syzbot+54c2f58f15fe6876b6ad@syzkaller.appspotmail.com
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: core: use device description as name

commit 131ac62253dba79daf4a6d83ab12293d2b9863d3 upstream.

This patch uses the device description to clearly identity a device
attached to the bus. It is needed as the currently useed mdevX
notation is not sufficiant in case more than one network
interface controller is being used at the same time.

Cc: stable@vger.kernel.org
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io: accel: kxcjk1013: restore the range after resume.

commit fe2d3df639a7940a125a33d6460529b9689c5406 upstream.

On some laptops, kxcjk1013 is powered off when system enters S3. We need
restore the range regiter during resume. Otherwise, the sensor doesn't
work properly after S3.

Signed-off-by: he, bo <bo.he@intel.com>
Signed-off-by: Chen, Hu <hu1.chen@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: core: fix a possible circular locking dependency

commit 7f75591fc5a123929a29636834d1bcb8b5c9fee3 upstream.

This fixes a possible circular locking dependency detected warning seen
with:
- CONFIG_PROVE_LOCKING=y
- consumer/provider IIO devices (ex: "voltage-divider" consumer of "adc")

When using the IIO consumer interface, e.g. iio_channel_get(), the consumer
device will likely call iio_read_channel_raw() or similar that rely on
'info_exist_lock' mutex.

typically:
...
mutex_lock(&chan->indio_dev->info_exist_lock);
if (chan->indio_dev->info == NULL) {
ret = -ENODEV;
goto err_unlock;
}
ret = do_some_ops()
err_unlock:
mutex_unlock(&chan->indio_dev->info_exist_lock);
return ret;
...

Same mutex is also hold in iio_device_unregister().

The following deadlock warning happens when:
- the consumer device has called an API like iio_read_channel_raw()
  at least once.
- the consumer driver is unregistered, removed (unbind from sysfs)

======================================================
WARNING: possible circular locking dependency detected
4.19.24 #577 Not tainted
------------------------------------------------------
sh/372 is trying to acquire lock:
(kn->count#30){++++}, at: kernfs_remove_by_name_ns+0x3c/0x84

but task is already holding lock:
(&dev->info_exist_lock){+.+.}, at: iio_device_unregister+0x18/0x60

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&dev->info_exist_lock){+.+.}:
       __mutex_lock+0x70/0xa3c
       mutex_lock_nested+0x1c/0x24
       iio_read_channel_raw+0x1c/0x60
       iio_read_channel_info+0xa8/0xb0
       dev_attr_show+0x1c/0x48
       sysfs_kf_seq_show+0x84/0xec
       seq_read+0x154/0x528
       __vfs_read+0x2c/0x15c
       vfs_read+0x8c/0x110
       ksys_read+0x4c/0xac
       ret_fast_syscall+0x0/0x28
       0xbedefb60

-> #0 (kn->count#30){++++}:
       lock_acquire+0xd8/0x268
       __kernfs_remove+0x288/0x374
       kernfs_remove_by_name_ns+0x3c/0x84
       remove_files+0x34/0x78
       sysfs_remove_group+0x40/0x9c
       sysfs_remove_groups+0x24/0x34
       device_remove_attrs+0x38/0x64
       device_del+0x11c/0x360
       cdev_device_del+0x14/0x2c
       iio_device_unregister+0x24/0x60
       release_nodes+0x1bc/0x200
       device_release_driver_internal+0x1a0/0x230
       unbind_store+0x80/0x130
       kernfs_fop_write+0x100/0x1e4
       __vfs_write+0x2c/0x160
       vfs_write+0xa4/0x17c
       ksys_write+0x4c/0xac
       ret_fast_syscall+0x0/0x28
       0xbe906840

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&dev->info_exist_lock);
                               lock(kn->count#30);
                               lock(&dev->info_exist_lock);
  lock(kn->count#30);

 *** DEADLOCK ***
...

cdev_device_del() can be called without holding the lock. It should be safe
as info_exist_lock prevents kernelspace consumers to use the exported
routines during/after provider removal. cdev_device_del() is for userspace.

Help to reproduce:
See example: Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
sysv {
compatible = "voltage-divider";
io-channels = <&adc 0>;
output-ohms = <22>;
full-ohms = <222>;
};

First, go to iio:deviceX for the "voltage-divider", do one read:
$ cd /sys/bus/iio/devices/iio:deviceX
$ cat in_voltage0_raw

Then, unbind the consumer driver. It triggers above deadlock warning.
$ cd /sys/bus/platform/drivers/iio-rescale/
$ echo sysv > unbind

Note I don't actually expect stable will pick this up all the
way back into IIO being in staging, but if's probably valid that
far back.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Fixes: ac917a81117c ("staging:iio:core set the iio_dev.info pointer to null on unregister")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: at91: disable adc channel interrupt in timeout case

commit 09c6bdee51183a575bf7546890c8c137a75a2b44 upstream.

Having a brief look at at91_adc_read_raw() it is obvious that in the case
of a timeout the setting of AT91_ADC_CHDR and AT91_ADC_IDR registers is
omitted. If 2 different channels are queried we can end up with a
situation where two interrupts are enabled, but only one interrupt is
cleared in the interrupt handler. Resulting in a interrupt loop and a
system hang.

Signed-off-by: Georg Ottinger <g.ottinger@abatec.at>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: Fix scan mask selection

commit 20ea39ef9f2f911bd01c69519e7d69cfec79fde3 upstream.

The trialmask is expected to have all bits set to 0 after allocation.
Currently kmalloc_array() is used which does not zero the memory and so
random bits are set. This results in random channels being enabled when
they shouldn't. Replace kmalloc_array() with kcalloc() which has the same
interface but zeros the memory.

Note the fix is actually required earlier than the below fixes tag, but
will require a manual backport due to move from kmalloc to kmalloc_array.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Fixes commit 057ac1acdfc4 ("iio: Use kmalloc_array() in iio_scan_mask_set()").
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: dac: mcp4725: add missing powerdown bits in store eeprom

commit 06003531502d06bc89d32528f6ec96bf978790f9 upstream.

When issuing the write DAC register and write eeprom command, the two
powerdown bits (PD0 and PD1) are assumed by the chip to be present in
the bytes sent. Leaving them at 0 implies "powerdown disabled" which is
a different state that the current one. By adding the current state of
the powerdown in the i2c write, the chip will correctly power-on exactly
like as it is at the moment of store_eeprom call.

This is documented in MCP4725's datasheet, FIGURE 6-2: "Write Commands
for DAC Input Register and EEPROM" and MCP4726's datasheet, FIGURE 6-3:
"Write All Memory Command".

Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ad_sigma_delta: select channel when reading register

commit fccfb9ce70ed4ea7a145f77b86de62e38178517f upstream.

The desired channel has to be selected in order to correctly fill the
buffer with the corresponding data.
The `ad_sd_write_reg()` already does this, but for the
`ad_sd_read_reg_raw()` this was omitted.

Fixes: af3008485ea03 ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: cros_ec: Fix the maths for gyro scale calculation

commit 3d02d7082e5823598090530c3988a35f69689943 upstream.

Calculation did not use IIO_DEGREE_TO_RAD and implemented a variant to
avoid precision loss as we aim a nano value. The offset added to avoid
rounding error, though, doesn't give us a close result to the expected
value. E.g.

For 1000dps, the result should be:

    (1000 * pi ) / 180 >> 15 ~= 0.000532632218

But with current calculation we get

    $ cat scale
    0.000547890

Fix the calculation by just doing the maths involved for a nano value

   val * pi * 10e12 / (180 * 2^15)

so we get a closer result.

    $ cat scale
    0.000532632

Fixes: c14dca07a31d ("iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:chemical:bme680: Fix SPI read interface

commit 73f3bc6da506711302bb67572440eb84b1ec4a2c upstream.

The SPI interface implementation was completely broken.

When using the SPI interface, there are only 7 address bits, the upper bit
is controlled by a page select register. The core needs access to both
ranges, so implement register read/write for both regions. The regmap
paging functionality didn't agree with a register that needs to be read
and modified, so I implemented a custom paging algorithm.

This fixes that the device wouldn't even probe in SPI mode.

The SPI interface then isn't different from I2C, merged them into the core,
and the I2C/SPI named registers are no longer needed.

Implemented register value caching for the registers to reduce the I2C/SPI
data transfers considerably.

The calibration set reads as all zeroes until some undefined point in time,
and I couldn't determine what makes it valid. The datasheet mentions these
registers but does not provide any hints on when they become valid, and they
aren't even enumerated in the memory map. So check the calibration and
retry reading it from the device after each measurement until it provides
something valid.

Despite the size this is suitable for a stable backport given that
it seems the SPI support never worked.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Fixes: 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor");
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:chemical:bme680: Fix, report temperature in millidegrees

commit 9436f45dd53595e21566a8c6627411077dfdb776 upstream.

The standard unit for temperature is millidegrees Celcius. Adapt the
driver to report in millidegrees instead of degrees.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Fixes: 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor");
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio/gyro/bmg160: Use millidegrees for temperature scale

commit 40a7198a4a01037003c7ca714f0d048a61e729ac upstream.

Standard unit for temperature is millidegrees Celcius, whereas this driver
was reporting in degrees. Fix the scale factor in the driver.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: gyro: mpu3050: fix chip ID reading

commit 409a51e0a4a5f908763191fae2c29008632eb712 upstream.

According to the datasheet, the last bit of CHIP_ID register controls
I2C bus, and the first one is unused. Handle this correctly.

Note that there are chips out there that have a value such that
the id check currently fails.

Signed-off-by: Sergey Larin <cerg2010cerg2010@mail.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: ad7192: Fix ad7193 channel address

commit 7ce0f216221856a17fc4934b39284678a5fef2e9 upstream.

This patch fixes the differential channels addresses for the ad7193.

Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: meter: fixed typo

commit 0a8a29be499cbb67df79370aaf5109085509feb8 upstream.

This patch fixes an obvious typo, which will cause erroneously returning the Peak
Voltage instead of the Peak Current.

Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
Cc: <Stable@vger.kernel.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: svm: make sure NMI is injected after nmi_singlestep

commit 99c221796a810055974b54c02e8f53297e48d146 upstream.

I noticed that apic test from kvm-unit-tests always hangs on my EPYC 7401P,
the hanging test nmi-after-sti is trying to deliver 30000 NMIs and tracing
shows that we're sometimes able to deliver a few but never all.

When we're trying to inject an NMI we may fail to do so immediately for
various reasons, however, we still need to inject it so enable_nmi_window()
arms nmi_singlestep mode. #DB occurs as expected, but we're not checking
for pending NMIs before entering the guest and unless there's a different
event to process, the NMI will never get delivered.

Make KVM_REQ_EVENT request on the vCPU from db_interception() to make sure
pending NMIs are checked and possibly injected.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Don't clear EFER during SMM transitions for 32-bit vCPU

commit 8f4dc2e77cdfaf7e644ef29693fa229db29ee1de upstream.

Neither AMD nor Intel CPUs have an EFER field in the legacy SMRAM save
state area, i.e. don't save/restore EFER across SMM transitions.  KVM
somewhat models this, e.g. doesn't clear EFER on entry to SMM if the
guest doesn't support long mode.  But during RSM, KVM unconditionally
clears EFER so that it can get back to pure 32-bit mode in order to
start loading CRs with their actual non-SMM values.

Clear EFER only when it will be written when loading the non-SMM state
so as to preserve bits that can theoretically be set on 32-bit vCPUs,
e.g. KVM always emulates EFER_SCE.

And because CR4.PAE is cleared only to play nice with EFER, wrap that
code in the long mode check as well.  Note, this may result in a
compiler warning about cr4 being consumed uninitialized.  Re-read CR4
even though it's technically unnecessary, as doing so allows for more
readable code and RSM emulation is not a performance critical path.

Fixes: 660a5d517aaab ("KVM: x86: save/load state on SMM switch")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix handle leak in smb2_query_symlink()

commit e6d0fb7b34f264f72c33053558a360a6a734905e upstream.

If we enter smb2_query_symlink() for something that is not a symlink
and where the SMB2_open() would succeed we would never end up
closing this handle and would thus leak a handle on the server.

Fix this by immediately calling SMB2_close() on successfull open.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix use-after-free in SMB2_read

commit 088aaf17aa79300cab14dbee2569c58cfafd7d6e upstream.

There is a KASAN use-after-free:
BUG: KASAN: use-after-free in SMB2_read+0x1136/0x1190
Read of size 8 at addr ffff8880b4e45e50 by task ln/1009

Should not release the 'req' because it will use in the trace.

Fixes: eccb4422cf97 ("smb3: Add ftrace tracepoints for improved SMB3 debugging")

Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org> 4.18+
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix use-after-free in SMB2_write

commit 6a3eb3360667170988f8a6477f6686242061488a upstream.

There is a KASAN use-after-free:
BUG: KASAN: use-after-free in SMB2_write+0x1342/0x1580
Read of size 8 at addr ffff8880b6a8e450 by task ln/4196

Should not release the 'req' because it will use in the trace.

Fixes: eccb4422cf97 ("smb3: Add ftrace tracepoints for improved SMB3 debugging")

Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org> 4.18+
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: keep FileInfo handle live during oplock break

commit b98749cac4a695f084a5ff076f4510b23e353ecd upstream.

In the oplock break handler, writing pending changes from pages puts
the FileInfo handle. If the refcount reaches zero it closes the handle
and waits for any oplock break handler to return, thus causing a deadlock.

To prevent this situation:

* We add a wait flag to cifsFileInfo_put() to decide whether we should
  wait for running/pending oplock break handlers

* We keep an additionnal reference of the SMB FileInfo handle so that
  for the rest of the handler putting the handle won't close it.
  - The ref is bumped everytime we queue the handler via the
    cifs_queue_oplock_break() helper.
  - The ref is decremented at the end of the handler

This bug was triggered by xfstest 464.

Also important fix to address the various reports of
oops in smb2_push_mandatory_locks

Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: IP6 defrag: use rbtrees in nf_conntrack_reasm.c

[ Upstream commit 997dd96471641e147cb2c33ad54284000d0f5e35 ]

Currently, IPv6 defragmentation code drops non-last fragments that
are smaller than 1280 bytes: see
commit 0ed4229b08c1 ("ipv6: defrag: drop non-last frags smaller than min mtu")

This behavior is not specified in IPv6 RFCs and appears to break
compatibility with some IPv6 implemenations, as reported here:
https://www.spinics.net/lists/netdev/msg543846.html

This patch re-uses common IP defragmentation queueing and reassembly
code in IP6 defragmentation in nf_conntrack, removing the 1280 byte
restriction.

Signed-off-by: Peter Oskolkov <posk@google.com>
Reported-by: Tom Herbert <tom@herbertland.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: IP6 defrag: use rbtrees for IPv6 defrag

[ Upstream commit d4289fcc9b16b89619ee1c54f829e05e56de8b9a ]

Currently, IPv6 defragmentation code drops non-last fragments that
are smaller than 1280 bytes: see
commit 0ed4229b08c1 ("ipv6: defrag: drop non-last frags smaller than min mtu")

This behavior is not specified in IPv6 RFCs and appears to break
compatibility with some IPv6 implemenations, as reported here:
https://www.spinics.net/lists/netdev/msg543846.html

This patch re-uses common IP defragmentation queueing and reassembly
code in IPv6, removing the 1280 byte restriction.

v2: change handling of overlaps to match that of upstream.

Signed-off-by: Peter Oskolkov <posk@google.com>
Reported-by: Tom Herbert <tom@herbertland.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: IP defrag: encapsulate rbtree defrag code into callable functions

[ Upstream commit c23f35d19db3b36ffb9e04b08f1d91565d15f84f ]

This is a refactoring patch: without changing runtime behavior,
it moves rbtree-related code from IPv4-specific files/functions
into .h/.c defrag files shared with IPv6 defragmentation code.

v2: make handling of overlapping packets match upstream.

Signed-off-by: Peter Oskolkov <posk@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sch_cake: Simplify logic in cake_select_tin()

[ Upstream commit 4976e3c683f328bc6f2edef555a4ffee6524486f ]

The logic in cake_select_tin() was getting a bit hairy, and it turns out we
can simplify it quite a bit. This also allows us to get rid of one of the
two diffserv parsing functions, which has the added benefit that
already-zeroed DSCP fields won't get re-written.

Suggested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfp: flower: remove vlan CFI bit from push vlan action

[ Upstream commit 42cd5484a22f1a1b947e21e2af65fa7dab09d017 ]

We no longer set CFI when pushing vlan tags, therefore we remove
the CFI bit from push vlan.

Fixes: 1a1e586f54bf ("nfp: add basic action capabilities to flower offloads")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfp: flower: replace CFI with vlan present

[ Upstream commit f7ee799a51ddbcc205ef615fe424fb5084e9e0aa ]

Replace vlan CFI bit with a vlan present bit that indicates the
presence of a vlan tag. Previously the driver incorrectly assumed
that an vlan id of 0 is not matchable, therefore we indicate vlan
presence with a vlan present bit.

Fixes: 5571e8c9f241 ("nfp: extend flower matching capabilities")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sch_cake: Make sure we can write the IP header before changing DSCP bits

[ Upstream commit c87b4ecdbe8db27867a7b7f840291cd843406bd7 ]

There is not actually any guarantee that the IP headers are valid before we
access the DSCP bits of the packets. Fix this using the same approach taken
in sch_dsmark.

Reported-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sch_cake: Use tc_skb_protocol() helper for getting packet protocol

[ Upstream commit b2100cc56fca8c51d28aa42a9f1fbcb2cf351996 ]

We shouldn't be using skb->protocol directly as that will miss cases with
hardware-accelerated VLAN tags. Use the helper instead to get the right
protocol number.

Reported-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

route: Avoid crash from dereferencing NULL rt->from

[ Upstream commit 9c69a13205151c0d801de9f9d83a818e6e8f60ec ]

When __ip6_rt_update_pmtu() is called, rt->from is RCU dereferenced, but is
never checked for null - rt6_flush_exceptions() may have removed the entry.

[ 1913.989004] RIP: 0010:ip6_rt_cache_alloc+0x13/0x170
[ 1914.209410] Call Trace:
[ 1914.214798]  <IRQ>
[ 1914.219226]  __ip6_rt_update_pmtu+0xb0/0x190
[ 1914.228649]  ip6_tnl_xmit+0x2c2/0x970 [ip6_tunnel]
[ 1914.239223]  ? ip6_tnl_parse_tlv_enc_lim+0x32/0x1a0 [ip6_tunnel]
[ 1914.252489]  ? __gre6_xmit+0x148/0x530 [ip6_gre]
[ 1914.262678]  ip6gre_tunnel_xmit+0x17e/0x3c7 [ip6_gre]
[ 1914.273831]  dev_hard_start_xmit+0x8d/0x1f0
[ 1914.283061]  sch_direct_xmit+0xfa/0x230
[ 1914.291521]  __qdisc_run+0x154/0x4b0
[ 1914.299407]  net_tx_action+0x10e/0x1f0
[ 1914.307678]  __do_softirq+0xca/0x297
[ 1914.315567]  irq_exit+0x96/0xa0
[ 1914.322494]  smp_apic_timer_interrupt+0x68/0x130
[ 1914.332683]  apic_timer_interrupt+0xf/0x20
[ 1914.341721]  </IRQ>

Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: FPGA, tls, idr remove on flow delete

[ Upstream commit df3a8344d404a810b4aadbf19b08c8232fbaa715 ]

Flow is kfreed on mlx5_fpga_tls_del_flow but kept in the idr data
structure, this is risky and can cause use-after-free, since the
idr_remove is delayed until tls_send_teardown_cmd completion.

Instead of delaying idr_remove, in this patch we do it on
mlx5_fpga_tls_del_flow, before actually kfree(flow).

Added synchronize_rcu before kfree(flow)

Fixes: ab412e1dd7db ("net/mlx5: Accel, add TLS rx offload routines")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/tls: prevent bad memory access in tls_is_sk_tx_device_offloaded()

[ Upstream commit b4f47f3848eb70986f75d06112af7b48b7f5f462 ]

Unlike '&&' operator, the '&' does not have short-circuit
evaluation semantics.  IOW both sides of the operator always
get evaluated.  Fix the wrong operator in
tls_is_sk_tx_device_offloaded(), which would lead to
out-of-bounds access for for non-full sockets.

Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: FPGA, tls, hold rcu read lock a bit longer

[ Upstream commit 31634bf5dcc418b5b2cacd954394c0c4620db6a2 ]

To avoid use-after-free, hold the rcu read lock until we are done copying
flow data into the command buffer.

Fixes: ab412e1dd7db ("net/mlx5: Accel, add TLS rx offload routines")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: thunderx: don't allow jumbo frames with XDP

[ Upstream commit 1f227d16083b2e280b7dde4ca78883d75593f2fd ]

The thunderx driver forbids to load an eBPF program if the MTU is too high,
but this can be circumvented by loading the eBPF, then raising the MTU.

Fix this by limiting the MTU if an eBPF program is already loaded.

Fixes: 05c773f52b96e ("net: thunderx: Add basic XDP support")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: thunderx: raise XDP MTU to 1508

[ Upstream commit 5ee15c101f29e0093ffb5448773ccbc786eb313b ]

The thunderx driver splits frames bigger than 1530 bytes to multiple
pages, making impossible to run an eBPF program on it.
This leads to a maximum MTU of 1508 if QinQ is in use.

The thunderx driver forbids to load an eBPF program if the MTU is higher
than 1500 bytes. Raise the limit to 1508 so it is possible to use L2
protocols which need some more headroom.

Fixes: 05c773f52b96e ("net: thunderx: Add basic XDP support")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: ensure rcu_read_lock() in ipv4_link_failure()

[ Upstream commit c543cb4a5f07e09237ec0fc2c60c9f131b2c79ad ]

fib_compute_spec_dst() needs to be called under rcu protection.

syzbot reported :

WARNING: suspicious RCU usage
5.1.0-rc4+ #165 Not tainted
include/linux/inetdevice.h:220 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by swapper/0/0:
 #0: 0000000051b67925 ((&n->timer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:170 [inline]
 #0: 0000000051b67925 ((&n->timer)){+.-.}, at: call_timer_fn+0xda/0x720 kernel/time/timer.c:1315

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-rc4+ #165
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5162
 __in_dev_get_rcu include/linux/inetdevice.h:220 [inline]
 fib_compute_spec_dst+0xbbd/0x1030 net/ipv4/fib_frontend.c:294
 spec_dst_fill net/ipv4/ip_options.c:245 [inline]
 __ip_options_compile+0x15a7/0x1a10 net/ipv4/ip_options.c:343
 ipv4_link_failure+0x172/0x400 net/ipv4/route.c:1195
 dst_link_failure include/net/dst.h:427 [inline]
 arp_error_report+0xd1/0x1c0 net/ipv4/arp.c:297
 neigh_invalidate+0x24b/0x570 net/core/neighbour.c:995
 neigh_timer_handler+0xc35/0xf30 net/core/neighbour.c:1081
 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
 expire_timers kernel/time/timer.c:1362 [inline]
 __run_timers kernel/time/timer.c:1681 [inline]
 __run_timers kernel/time/timer.c:1649 [inline]
 run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
 __do_softirq+0x266/0x95a kernel/softirq.c:293
 invoke_softirq kernel/softirq.c:374 [inline]
 irq_exit+0x180/0x1d0 kernel/softirq.c:414
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807

Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: recompile ip options in ipv4_link_failure

[ Upstream commit ed0de45a1008991fdaa27a0152befcb74d126a8b ]

Recompile IP options since IPCB may not be valid anymore when
ipv4_link_failure is called from arp_error_report.

Refer to the commit 3da1ed7ac398 ("net: avoid use IPCB in cipso_v4_error")
and the commit before that (9ef6b42ad6fd) for a similar issue.

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost: reject zero size iova range

[ Upstream commit 813dbeb656d6c90266f251d8bd2b02d445afa63f ]

We used to accept zero size iova range which will lead a infinite loop
in translate_desc(). Fixing this by failing the request in this case.

Reported-by: syzbot+d21e6e297322a900c128@syzkaller.appspotmail.com
Fixes: 6b1e6cc7 ("vhost: new device IOTLB API")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: missing entries in name table of publications

[ Upstream commit d1841533e54876f152a30ac398a34f47ad6590b1 ]

When binding multiple services with specific type 1Ki, 2Ki..,
this leads to some entries in the name table of publications
missing when listed out via 'tipc name show'.

The problem is at identify zero last_type conditional provided
via netlink. The first is initial 'type' when starting name table
dummping. The second is continuously with zero type (node state
service type). Then, lookup function failure to finding node state
service type in next iteration.

To solve this, adding more conditional to marked as dirty type and
lookup correct service type for the next iteration instead of select
the first service as initial 'type' zero.

Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

team: set slave to promisc if team is already in promisc mode

[ Upstream commit 43c2adb9df7ddd6560fd3546d925b42cef92daa0 ]

After adding a team interface to bridge, the team interface will enter
promisc mode. Then if we add a new slave to team0, the slave will keep
promisc off. Fix it by setting slave to promisc on if team master is
already in promisc mode, also do the same for allmulti.

v2: add promisc and allmulti checking when delete ports

Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: tcp_grow_window() needs to respect tcp_space()

[ Upstream commit 50ce163a72d817a99e8974222dcf2886d5deb1ae ]

For some reason, tcp_grow_window() correctly tests if enough room
is present before attempting to increase tp->rcv_ssthresh,
but does not prevent it to grow past tcp_space()

This is causing hard to debug issues, like failing
the (__tcp_select_window(sk) >= tp->rcv_wnd) test
in __tcp_ack_snd_check(), causing ACK delays and possibly
slow flows.

Depending on tcp_rmem[2], MTU, skb->len/skb->truesize ratio,
we can see the problem happening on "netperf -t TCP_RR -- -r 2000,2000"
after about 60 round trips, when the active side no longer sends
immediate acks.

This bug predates git history.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fou: do not use guehdr after iptunnel_pull_offloads in gue_udp_recv

[ Upstream commit 988dc4a9a3b66be75b30405a5494faf0dc7cffb6 ]

gue tunnels run iptunnel_pull_offloads on received skbs. This can
determine a possible use-after-free accessing guehdr pointer since
the packet will be 'uncloned' running pskb_expand_head if it is a
cloned gso skb (e.g if the packet has been sent though a veth device)

Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Fix missing meta data in skb with vlan packet

[ Upstream commit d85e8be2a5a02869f815dd0ac2d743deb4cd7957 ]

skb_reorder_vlan_header() should move XDP meta data with ethernet header
if XDP meta data exists.

Fixes: de8f3a83b0a0 ("bpf: add meta pointer for direct access")
Signed-off-by: Yuya Kusakabe <yuya.kusakabe@gmail.com>
Signed-off-by: Takeru Hayasaka <taketarou2@gmail.com>
Co-developed-by: Takeru Hayasaka <taketarou2@gmail.com>
Reviewed-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bridge: multicast: use rcu to access port list from br_multicast_start_querier

[ Upstream commit c5b493ce192bd7a4e7bd073b5685aad121eeef82 ]

br_multicast_start_querier() walks over the port list but it can be
called from a timer with only multicast_lock held which doesn't protect
the port list, so use RCU to walk over it.

Fixes: c83b8fab06fc ("bridge: Restart queries when last querier expires")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bridge: fix per-port af_packet sockets

[ Upstream commit 3b2e2904deb314cc77a2192f506f2fd44e3d10d0 ]

When the commit below was introduced it changed two visible things:
 - the skb was no longer passed through the protocol handlers with the
   original device
 - the skb was passed up the stack with skb->dev = bridge

The first change broke af_packet sockets on bridge ports. For example we
use them for hostapd which listens for ETH_P_PAE packets on the ports.
We discussed two possible fixes:
 - create a clone and pass it through NF_HOOK(), act on the original skb
   based on the result
 - somehow signal to the caller from the okfn() that it was called,
   meaning the skb is ok to be passed, which this patch is trying to
   implement via returning 1 from the bridge link-local okfn()

Note that we rely on the fact that NF_QUEUE/STOLEN would return 0 and
drop/error would return < 0 thus the okfn() is called only when the
return was 1, so we signal to the caller that it was called by preserving
the return value from nf_hook().

Fixes: 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: atm: Fix potential Spectre v1 vulnerabilities

[ Upstream commit 899537b73557aafbdd11050b501cf54b4f5c45af ]

arg is controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

net/atm/lec.c:715 lec_mcast_attach() warn: potential spectre issue 'dev_lec' [r] (local cap)

Fix this by sanitizing arg before using it to index dev_lec.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

failover: allow name change on IFF_UP slave interfaces

[ Upstream commit 8065a779f17e94536a1c4dcee4f9d88011672f97 ]

When a netdev appears through hot plug then gets enslaved by a failover
master that is already up and running, the slave will be opened
right away after getting enslaved. Today there's a race that userspace
(udev) may fail to rename the slave if the kernel (net_failover)
opens the slave earlier than when the userspace rename happens.
Unlike bond or team, the primary slave of failover can't be renamed by
userspace ahead of time, since the kernel initiated auto-enslavement is
unable to, or rather, is never meant to be synchronized with the rename
request from userspace.

As the failover slave interfaces are not designed to be operated
directly by userspace apps: IP configuration, filter rules with
regard to network traffic passing and etc., should all be done on master
interface. In general, userspace apps only care about the
name of master interface, while slave names are less important as long
as admin users can see reliable names that may carry
other information describing the netdev. For e.g., they can infer that
"ens3nsby" is a standby slave of "ens3", while for a
name like "eth0" they can't tell which master it belongs to.

Historically the name of IFF_UP interface can't be changed because
there might be admin script or management software that is already
relying on such behavior and assumes that the slave name can't be
changed once UP. But failover is special: with the in-kernel
auto-enslavement mechanism, the userspace expectation for device
enumeration and bring-up order is already broken. Previously initramfs
and various userspace config tools were modified to bypass failover
slaves because of auto-enslavement and duplicate MAC address. Similarly,
in case that users care about seeing reliable slave name, the new type
of failover slaves needs to be taken care of specifically in userspace
anyway.

It's less risky to lift up the rename restriction on failover slave
which is already UP. Although it's possible this change may potentially
break userspace component (most likely configuration scripts or
management software) that assumes slave name can't be changed while
UP, it's relatively a limited and controllable set among all userspace
components, which can be fixed specifically to listen for the rename
events on failover slaves. Userspace component interacting with slaves
is expected to be changed to operate on failover master interface
instead, as the failover slave is dynamic in nature which may come and
go at any point.  The goal is to make the role of failover slaves less
relevant, and userspace components should only deal with failover master
in the long run.

Fixes: 30c8bd5aa8b2 ("net: Introduce generic failover module")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: fix event handling for stacked bonds

[ Upstream commit 92480b3977fd3884649d404cbbaf839b70035699 ]

When a bond is enslaved to another bond, bond_netdev_event() only
handles the event as if the bond is a master, and skips treating the
bond as a slave.

This leads to a refcount leak on the slave, since we don't remove the
adjacency to its master and the master holds a reference on the slave.

Reproducer:
  ip link add bondL type bond
  ip link add bondU type bond
  ip link set bondL master bondU
  ip link del bondL

No "Fixes:" tag, this code is older than git history.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.36

appletalk: Fix compile regression

[ Upstream commit 27da0d2ef998e222a876c0cec72aa7829a626266 ]

A bugfix just broke compilation of appletalk when CONFIG_SYSCTL
is disabled:

In file included from net/appletalk/ddp.c:65:
net/appletalk/ddp.c: In function 'atalk_init':
include/linux/atalk.h:164:34: error: expected expression before 'do'
 #define atalk_register_sysctl()  do { } while(0)
                                  ^~
net/appletalk/ddp.c:1934:7: note: in expansion of macro 'atalk_register_sysctl'
  rc = atalk_register_sysctl();

This is easier to avoid by using conventional inline functions
as stubs rather than macros. The header already has inline
functions for other purposes, so I'm changing over all the
macros for consistency.

Fixes: 6377f787aeb9 ("appletalk: Fix use-after-free in atalk_proc_exit")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm: hide incomplete nr_indirectly_reclaimable in sysfs

In upstream branch this fixed by commit b29940c1abd7 ("mm: rename and
change semantics of nr_indirectly_reclaimable_bytes").

This fixes /sys/devices/system/node/node*/vmstat format:

...
nr_dirtied 6613155
nr_written 5796802
 11089216
...

Cc: <stable@vger.kernel.org> # 4.19.y
Fixes: 7aaf77272358 ("mm: don't show nr_indirectly_reclaimable in /proc/vmstat")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hide incomplete nr_indirectly_reclaimable in /proc/zoneinfo

[fixed differently upstream, this is a work-around to resolve it for 4.19.y]

Yongqin reported that /proc/zoneinfo format is broken in 4.14
due to commit 7aaf77272358 ("mm: don't show nr_indirectly_reclaimable
in /proc/vmstat")

Node 0, zone      DMA
  per-node stats
      nr_inactive_anon 403
      nr_active_anon 89123
      nr_inactive_file 128887
      nr_active_file 47377
      nr_unevictable 2053
      nr_slab_reclaimable 7510
      nr_slab_unreclaimable 10775
      nr_isolated_anon 0
      nr_isolated_file 0
      <...>
      nr_vmscan_write 0
      nr_vmscan_immediate_reclaim 0
      nr_dirtied   6022
      nr_written   5985
                   74240
      ^^^^^^^^^^
  pages free     131656

The problem is caused by the nr_indirectly_reclaimable counter,
which is hidden from the /proc/vmstat, but not from the
/proc/zoneinfo. Let's fix this inconsistency and hide the
counter from /proc/zoneinfo exactly as from /proc/vmstat.

BTW, in 4.19+ the counter has been renamed and exported by
the commit b29940c1abd7 ("mm: rename and change semantics of
nr_indirectly_reclaimable_bytes"), so there is no such a problem
anymore.

Cc: <stable@vger.kernel.org> # 4.14.x-4.18.x
Fixes: 7aaf77272358 ("mm: don't show nr_indirectly_reclaimable in /proc/vmstat")
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Failed to drain send queue when QP is put into error state

commit 662d66466637862ef955f7f6e78a286d8cf0ebef upstream.

When a QP is put into error state, all pending requests in the send work
queue should be drained. The following sequence of events could lead to a
failure, causing a request to hang:

(1) The QP builds a packet and tries to send through SDMA engine.
    However, PIO engine is still busy. Consequently, this packet is put on
    the QP's tx list and the QP is put on the PIO waiting list. The field
    qp->s_flags is set with HFI1_S_WAIT_PIO_DRAIN;

(2) The QP is put into error state by the user application and
    notify_error_qp() is called, which removes the QP from the PIO waiting
    list and the packet from the QP's tx list. In addition, qp->s_flags is
    cleared of RVT_S_ANY_WAIT_IO bits, which does not include
    HFI1_S_WAIT_PIO_DRAIN bit;

(3) The hfi1_schdule_send() function is called to drain the QP's send
    queue. Subsequently, hfi1_do_send() is called. Since the flag bit
    HFI1_S_WAIT_PIO_DRAIN is set in qp->s_flags, hfi1_send_ok() fails.  As
    a result, hfi1_do_send() bails out without draining any request from
    the send queue;

(4) The PIO engine completes the sending and tries to wake up any QP on
    its waiting list. But the QP has been removed from the PIO waiting
    list and therefore is kept in sleep forever.

The fix is to clear qp->s_flags of HFI1_S_ANY_WAIT_IO bits in step (2).
HFI1_S_ANY_WAIT_IO includes RVT_S_ANY_WAIT_IO and HFI1_S_WAIT_PIO_DRAIN.

Fixes: 2e2ba09e48b7 ("IB/rdmavt, IB/hfi1: Create device dependent s_flags")
Cc: <stable@vger.kernel.org> # 4.19.x+
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix use after free in bpf_evict_inode

[ Upstream commit 1da6c4d9140cb7c13e87667dc4e1488d6c8fc10f ]

syzkaller was able to generate the following UAF in bpf:

  BUG: KASAN: use-after-free in lookup_last fs/namei.c:2269 [inline]
  BUG: KASAN: use-after-free in path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318
  Read of size 1 at addr ffff8801c4865c47 by task syz-executor2/9423

  CPU: 0 PID: 9423 Comm: syz-executor2 Not tainted 4.20.0-rc1-next-20181109+
  #110
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
  Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x244/0x39d lib/dump_stack.c:113
    print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256
    kasan_report_error mm/kasan/report.c:354 [inline]
    kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412
    __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
    lookup_last fs/namei.c:2269 [inline]
    path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318
    filename_lookup+0x26a/0x520 fs/namei.c:2348
    user_path_at_empty+0x40/0x50 fs/namei.c:2608
    user_path include/linux/namei.h:62 [inline]
    do_mount+0x180/0x1ff0 fs/namespace.c:2980
    ksys_mount+0x12d/0x140 fs/namespace.c:3258
    __do_sys_mount fs/namespace.c:3272 [inline]
    __se_sys_mount fs/namespace.c:3269 [inline]
    __x64_sys_mount+0xbe/0x150 fs/namespace.c:3269
    do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
    entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x457569
  Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
  48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
  ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
  RSP: 002b:00007fde6ed96c78 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
  RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000457569
  RDX: 0000000020000040 RSI: 0000000020000000 RDI: 0000000000000000
  RBP: 000000000072bf00 R08: 0000000020000340 R09: 0000000000000000
  R10: 0000000000200000 R11: 0000000000000246 R12: 00007fde6ed976d4
  R13: 00000000004c2c24 R14: 00000000004d4990 R15: 00000000ffffffff

  Allocated by task 9424:
    save_stack+0x43/0xd0 mm/kasan/kasan.c:448
    set_track mm/kasan/kasan.c:460 [inline]
    kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
    __do_kmalloc mm/slab.c:3722 [inline]
    __kmalloc_track_caller+0x157/0x760 mm/slab.c:3737
    kstrdup+0x39/0x70 mm/util.c:49
    bpf_symlink+0x26/0x140 kernel/bpf/inode.c:356
    vfs_symlink+0x37a/0x5d0 fs/namei.c:4127
    do_symlinkat+0x242/0x2d0 fs/namei.c:4154
    __do_sys_symlink fs/namei.c:4173 [inline]
    __se_sys_symlink fs/namei.c:4171 [inline]
    __x64_sys_symlink+0x59/0x80 fs/namei.c:4171
    do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
    entry_SYSCALL_64_after_hwframe+0x49/0xbe

  Freed by task 9425:
    save_stack+0x43/0xd0 mm/kasan/kasan.c:448
    set_track mm/kasan/kasan.c:460 [inline]
    __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
    kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
    __cache_free mm/slab.c:3498 [inline]
    kfree+0xcf/0x230 mm/slab.c:3817
    bpf_evict_inode+0x11f/0x150 kernel/bpf/inode.c:565
    evict+0x4b9/0x980 fs/inode.c:558
    iput_final fs/inode.c:1550 [inline]
    iput+0x674/0xa90 fs/inode.c:1576
    do_unlinkat+0x733/0xa30 fs/namei.c:4069
    __do_sys_unlink fs/namei.c:4110 [inline]
    __se_sys_unlink fs/namei.c:4108 [inline]
    __x64_sys_unlink+0x42/0x50 fs/namei.c:4108
    do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
    entry_SYSCALL_64_after_hwframe+0x49/0xbe

In this scenario path lookup under RCU is racing with the final
unlink in case of symlinks. As Linus puts it in his analysis:

  [...] We actually RCU-delay the inode freeing itself, but
  when we do the final iput(), the "evict()" function is called
  synchronously. Now, the simple fix would seem to just RCU-delay
  the kfree() of the symlink data in bpf_evict_inode(). Maybe
  that's the right thing to do. [...]

Al suggested to piggy-back on the ->destroy_inode() callback in
order to implement RCU deferral there which can then kfree() the
inode->i_link eventually right before putting inode back into
inode cache. By reusing free_inode_nonrcu() from there we can
avoid the need for our own inode cache and just reuse generic
one as we currently do.

And in-fact on top of all this we should just get rid of the
bpf_evict_inode() entirely. This means truncate_inode_pages_final()
and clear_inode() will then simply be called by the fs core via
evict(). Dropping the reference should really only be done when
inode is unhashed and nothing reachable anymore, so it's better
also moved into the final ->destroy_inode() callback.

Fixes: 0f98621bef5d ("bpf, inode: add support for symlinks and fix mtime/ctime")
Reported-by: syzbot+fb731ca573367b7f6564@syzkaller.appspotmail.com
Reported-by: syzbot+a13e5ead792d6df37818@syzkaller.appspotmail.com
Reported-by: syzbot+7a8ba368b47fdefca61e@syzkaller.appspotmail.com
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/lkml/0000000000006946d2057bbd0eef@google.com/T/
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

include/linux/swap.h: use offsetof() instead of custom __swapoffset macro

[ Upstream commit a4046c06be50a4f01d435aa7fe57514818e6cc82 ]

Use offsetof() to calculate offset of a field to take advantage of
compiler built-in version when possible, and avoid UBSAN warning when
compiling with Clang:

  UBSAN: Undefined behaviour in mm/swapfile.c:3010:38
  member access within null pointer of type 'union swap_header'
  CPU: 6 PID: 1833 Comm: swapon Tainted: G S                4.19.23 #43
  Call trace:
   dump_backtrace+0x0/0x194
   show_stack+0x20/0x2c
   __dump_stack+0x20/0x28
   dump_stack+0x70/0x94
   ubsan_epilogue+0x14/0x44
   ubsan_type_mismatch_common+0xf4/0xfc
   __ubsan_handle_type_mismatch_v1+0x34/0x54
   __se_sys_swapon+0x654/0x1084
   __arm64_sys_swapon+0x1c/0x24
   el0_svc_common+0xa8/0x150
   el0_svc_compat_handler+0x2c/0x38
   el0_svc_compat+0x8/0x18

Link: http://lkml.kernel.org/r/20190312081902.223764-1-pihsun@chromium.org
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to dirty inode for i_mode recovery

[ Upstream commit ca597bddedd94906cd761d8be6a3ad21292725de ]

As Seulbae Kim reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=202637

We didn't recover permission field correctly after sudden power-cut,
the reason is in setattr we didn't add inode into global dirty list
once i_mode is changed, so latter checkpoint triggered by fsync will
not flush last i_mode into disk, result in this problem, fix it.

Reported-by: Seulbae Kim <seulbae@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix client call connect/disconnect race

[ Upstream commit 930c9f9125c85b5134b3e711bc252ecc094708e3 ]

rxrpc_disconnect_client_call() reads the call's connection ID protocol
value (call->cid) as part of that function's variable declarations.  This
is bad because it's not inside the locked section and so may race with
someone granting use of the channel to the call.

This manifests as an assertion failure (see below) where the call in the
presumed channel (0 because call->cid wasn't set when we read it) doesn't
match the call attached to the channel we were actually granted (if 1, 2 or
3).

Fix this by moving the read and dependent calculations inside of the
channel_lock section.  Also, only set the channel number and pointer
variables if cid is not zero (ie. unset).

This problem can be induced by injecting an occasional error in
rxrpc_wait_for_channel() before the call to schedule().

Make two further changes also:

 (1) Add a trace for wait failure in rxrpc_connect_call().

 (2) Drop channel_lock before BUG'ing in the case of the assertion failure.

The failure causes a trace akin to the following:

rxrpc: Assertion failed - 18446612685268945920(0xffff8880beab8c00) == 18446612685268621312(0xffff8880bea69800) is false
------------[ cut here ]------------
kernel BUG at net/rxrpc/conn_client.c:824!
...
RIP: 0010:rxrpc_disconnect_client_call+0x2bf/0x99d
...
Call Trace:
 rxrpc_connect_call+0x902/0x9b3
 ? wake_up_q+0x54/0x54
 rxrpc_new_client_call+0x3a0/0x751
 ? rxrpc_kernel_begin_call+0x141/0x1bc
 ? afs_alloc_call+0x1b5/0x1b5
 rxrpc_kernel_begin_call+0x141/0x1bc
 afs_make_call+0x20c/0x525
 ? afs_alloc_call+0x1b5/0x1b5
 ? __lock_is_held+0x40/0x71
 ? lockdep_init_map+0xaf/0x193
 ? lockdep_init_map+0xaf/0x193
 ? __lock_is_held+0x40/0x71
 ? yfs_fs_fetch_data+0x33b/0x34a
 yfs_fs_fetch_data+0x33b/0x34a
 afs_fetch_data+0xdc/0x3b7
 afs_read_dir+0x52d/0x97f
 afs_dir_iterate+0xa0/0x661
 ? iterate_dir+0x63/0x141
 iterate_dir+0xa2/0x141
 ksys_getdents64+0x9f/0x11b
 ? filldir+0x111/0x111
 ? do_syscall_64+0x3e/0x1a0
 __x64_sys_getdents64+0x16/0x19
 do_syscall_64+0x7d/0x1a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 45025bceef17 ("rxrpc: Improve management and caching of client connection objects")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/div64.c: off by one in shift

[ Upstream commit cdc94a37493135e355dfc0b0e086d84e3eadb50d ]

fls counts bits starting from 1 to 32 (returns 0 for zero argument).  If
we add 1 we shift right one bit more and loose precision from divisor,
what cause function incorect results with some numbers.

Corrected code was tested in user-space, see bugzilla:
   https://bugzilla.kernel.org/show_bug.cgi?id=202391

Link: http://lkml.kernel.org/r/1548686944-11891-1-git-send-email-sgruszka@redhat.com
Fixes: 658716d19f8f ("div64_u64(): improve precision on 32bit platforms")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Reported-by: Siarhei Volkau <lis8215@gmail.com>
Tested-by: Siarhei Volkau <lis8215@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

appletalk: Fix use-after-free in atalk_proc_exit

[ Upstream commit 6377f787aeb945cae7abbb6474798de129e1f3ac ]

KASAN report this:

BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71
Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806

CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xfa/0x1ce lib/dump_stack.c:113
 print_address_description+0x65/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71
 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667
 atalk_proc_exit+0x18/0x820 [appletalk]
 atalk_exit+0xf/0x5a [appletalk]
 __do_sys_delete_module kernel/module.c:1018 [inline]
 __se_sys_delete_module kernel/module.c:961 [inline]
 __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc
R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff

Allocated by task 2806:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496
 slab_post_alloc_hook mm/slab.h:444 [inline]
 slab_alloc_node mm/slub.c:2739 [inline]
 slab_alloc mm/slub.c:2747 [inline]
 kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752
 kmem_cache_zalloc include/linux/slab.h:730 [inline]
 __proc_create+0x30f/0xa20 fs/proc/generic.c:408
 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469
 0xffffffffc10c01bb
 0xffffffffc10c0166
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 2806:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458
 slab_free_hook mm/slub.c:1409 [inline]
 slab_free_freelist_hook mm/slub.c:1436 [inline]
 slab_free mm/slub.c:2986 [inline]
 kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002
 pde_put+0x6e/0x80 fs/proc/generic.c:647
 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684
 0xffffffffc10c031c
 0xffffffffc10c0166
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881f41fe500
 which belongs to the cache proc_dir_entry of size 256
The buggy address is located 176 bytes inside of
 256-byte region [ffff8881f41fe500, ffff8881f41fe600)
The buggy address belongs to the page:
page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00
raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                     ^
 ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
 ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

It should check the return value of atalk_proc_init fails,
otherwise atalk_exit will trgger use-after-free in pde_subdir_find
while unload the module.This patch fix error cleanup path of atalk_init

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: use init_mqd function to allocate object for hid_mqd (CI)

[ Upstream commit cac734c2dbd2514f14c8c6a17caba1990d83bf1d ]

if use the legacy method to allocate object, when mqd_hiq need to run
uninit code, it will be cause WARNING call trace.

eg: (s3 suspend test)
[   34.918944] Call Trace:
[   34.918948]  [<ffffffff92961dc1>] dump_stack+0x19/0x1b
[   34.918950]  [<ffffffff92297648>] __warn+0xd8/0x100
[   34.918951]  [<ffffffff9229778d>] warn_slowpath_null+0x1d/0x20
[   34.918991]  [<ffffffffc03ce1fe>] uninit_mqd_hiq_sdma+0x4e/0x50 [amdgpu]
[   34.919028]  [<ffffffffc03d0ef7>] uninitialize+0x37/0xe0 [amdgpu]
[   34.919064]  [<ffffffffc03d15a6>] kernel_queue_uninit+0x16/0x30 [amdgpu]
[   34.919086]  [<ffffffffc03d26c2>] pm_uninit+0x12/0x20 [amdgpu]
[   34.919107]  [<ffffffffc03d4915>] stop_nocpsch+0x15/0x20 [amdgpu]
[   34.919129]  [<ffffffffc03c1dce>] kgd2kfd_suspend.part.4+0x2e/0x50 [amdgpu]
[   34.919150]  [<ffffffffc03c2667>] kgd2kfd_suspend+0x17/0x20 [amdgpu]
[   34.919171]  [<ffffffffc03c103a>] amdgpu_amdkfd_suspend+0x1a/0x20 [amdgpu]
[   34.919187]  [<ffffffffc02ec428>] amdgpu_device_suspend+0x88/0x3a0 [amdgpu]
[   34.919189]  [<ffffffff922e22cf>] ? enqueue_entity+0x2ef/0xbe0
[   34.919205]  [<ffffffffc02e8220>] amdgpu_pmops_suspend+0x20/0x30 [amdgpu]
[   34.919207]  [<ffffffff925c56ff>] pci_pm_suspend+0x6f/0x150
[   34.919208]  [<ffffffff925c5690>] ? pci_pm_freeze+0xf0/0xf0
[   34.919210]  [<ffffffff926b45c6>] dpm_run_callback+0x46/0x90
[   34.919212]  [<ffffffff926b49db>] __device_suspend+0xfb/0x2a0
[   34.919213]  [<ffffffff926b4b9f>] async_suspend+0x1f/0xa0
[   34.919214]  [<ffffffff922c918f>] async_run_entry_fn+0x3f/0x130
[   34.919216]  [<ffffffff922b9d4f>] process_one_work+0x17f/0x440
[   34.919217]  [<ffffffff922bade6>] worker_thread+0x126/0x3c0
[   34.919218]  [<ffffffff922bacc0>] ? manage_workers.isra.25+0x2a0/0x2a0
[   34.919220]  [<ffffffff922c1c31>] kthread+0xd1/0xe0
[   34.919221]  [<ffffffff922c1b60>] ? insert_kthread_work+0x40/0x40
[   34.919222]  [<ffffffff92974c1d>] ret_from_fork_nospec_begin+0x7/0x21
[   34.919224]  [<ffffffff922c1b60>] ? insert_kthread_work+0x40/0x40
[   34.919224] ---[ end trace 38cd9f65c963adad ]---

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8839/1: kprobe: make patch_lock a raw_spinlock_t

[ Upstream commit 143c2a89e0e5fda6c6fd08d7bc1126438c19ae90 ]

When running kprobe on -rt kernel, the below bug is caught:

|BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:931
|in_atomic(): 1, irqs_disabled(): 128, pid: 14, name: migration/0
|Preemption disabled at:[<802f2b98>] cpu_stopper_thread+0xc0/0x140
|CPU: 0 PID: 14 Comm: migration/0 Tainted: G O 4.8.3-rt2 #1
|Hardware name: Freescale LS1021A
|[<8025a43c>] (___might_sleep)
|[<80b5b324>] (rt_spin_lock)
|[<80b5c31c>] (__patch_text_real)
|[<80b5c3ac>] (patch_text_stop_machine)
|[<802f2920>] (multi_cpu_stop)

Since patch_text_stop_machine() is called in stop_machine() which
disables IRQ, sleepable lock should be not used in this atomic context,
 so replace patch_lock to raw lock.

Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/volt/gf117: fix speedo readout register

[ Upstream commit fc782242749fa4235592854fafe1a1297583c1fb ]

GF117 appears to use the same register as GK104 (but still with the
general Fermi readout mechanism).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports

[ Upstream commit 85b0cae89d5266e6a7abb2e83c6f716326fc494c ]

Gigabyte X299 DESIGNARE EX motherboard has one PCIe root port that is
connected to an Alpine Ridge Thunderbolt controller.  This port has slot
implemented bit set in the config space but other than that it is not
hotplug capable in the sense we are expecting in Linux (it has
dev->is_hotplug_bridge set to 0):

  00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5
    Bus: primary=00, secondary=05, subordinate=46, sec-latency=0
    Memory behind bridge: 78000000-8fffffff [size=384M]
    Prefetchable memory behind bridge: 00003800f8000000-00003800ffffffff [size=128M]
    ...
    Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
    ...
      SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
      Slot #8, PowerLimit 25.000W; Interlock- NoCompl+
      SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
      Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
      SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
      Changed: MRL- PresDet+ LinkState+

This system is using ACPI based hotplug to notify the OS that it needs to
rescan the PCI bus (ACPI hotplug).

If there is nothing connected in any of the Thunderbolt ports the root port
will not have any runtime PM active children and is thus automatically
runtime suspended pretty soon after boot by PCI PM core.  Now, when a
device is connected the BIOS SMI handler responsible for enumerating newly
added devices is not able to find anything because the port is in D3.

Prevent this from happening by blacklisting PCI power management of this
particular Gigabyte system.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=202031
Reported-by: Kedar A Dongre <kedar.a.dongre@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: cpu-debug: Support for CA73 CPUs

[ Upstream commit a0f890aba2be33377f4eb24e13633c4a76a68f38 ]

This patch is to add the AMBA device ID for CA73 CPU, so that CPU debug
module can be initialized successfully when a SoC contain CA73 CPUs.

This patch has been verified on 96boards Hikey960.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "ACPI / EC: Remove old CLEAR_ON_RESUME quirk"

[ Upstream commit b6a3e1475b0220378ad32bdf4d8692f058b1fc03 ]

On some Samsung hardware, it is necessary to clear events accumulated by
the EC during sleep. These ECs stop reporting GPEs until they are manually
polled, if too many events are accumulated.
Thus the CLEAR_ON_RESUME quirk is introduced to send EC query commands
unconditionally after resume to clear all the EC query events on those
platforms.

Later, commit 4c237371f290 ("ACPI / EC: Remove old CLEAR_ON_RESUME quirk")
removes the CLEAR_ON_RESUME quirk because we thought the new EC IRQ
polling logic should handle this case.

Now it has been proved that the EC IRQ Polling logic does not fix the
issue actually because we got regression report on these Samsung
platforms after removing the quirk.

Thus revert commit 4c237371f290 ("ACPI / EC: Remove old CLEAR_ON_RESUME
quirk") to introduce back the Samsung quirk in this patch.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161
Tested-by: Ortwin Glück <odi@odi.ch>
Tested-by: Francisco Cribari <cribari@gmail.com>
Tested-by: Balazs Varga <balazs4web@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: axis - fix for recursive locking from bottom half

[ Upstream commit c34a83820f59bb275e5f2d55cd5ea99c64f6ef23 ]

Clients may submit a new requests from the completion callback
context. The driver was not prepared to receive a request in this
state because it already held the request queue lock and a recursive
lock error is triggered.

Now all completions are queued up until we are ready to drop the queue
lock and then delivered.

The fault was triggered by TCP over an IPsec connection in the LTP
test suite:
  LTP: starting tcp4_ipsec02 (tcp_ipsec.sh -p ah -m transport -s "100 1000 65535")
  BUG: spinlock recursion on CPU#1, genload/943
   lock: 0xbf3c3094, .magic: dead4ead, .owner: genload/943, .owner_cpu: 1
  CPU: 1 PID: 943 Comm: genload Tainted: G           O    4.9.62-axis5-devel #6
  Hardware name: Axis ARTPEC-6 Platform
   (unwind_backtrace) from [<8010d134>] (show_stack+0x18/0x1c)
   (show_stack) from [<803a289c>] (dump_stack+0x84/0x98)
   (dump_stack) from [<8016e164>] (do_raw_spin_lock+0x124/0x128)
   (do_raw_spin_lock) from [<804de1a4>] (artpec6_crypto_submit+0x2c/0xa0)
   (artpec6_crypto_submit) from [<804def38>] (artpec6_crypto_prepare_submit_hash+0xd0/0x54c)
   (artpec6_crypto_prepare_submit_hash) from [<7f3165f0>] (ah_output+0x2a4/0x3dc [ah4])
   (ah_output [ah4]) from [<805df9bc>] (xfrm_output_resume+0x178/0x4a4)
   (xfrm_output_resume) from [<805d283c>] (xfrm4_output+0xac/0xbc)
   (xfrm4_output) from [<80587928>] (ip_queue_xmit+0x140/0x3b4)
   (ip_queue_xmit) from [<805a13b4>] (tcp_transmit_skb+0x4c4/0x95c)
   (tcp_transmit_skb) from [<8059f218>] (tcp_rcv_state_process+0xdf4/0xdfc)
   (tcp_rcv_state_process) from [<805a7530>] (tcp_v4_do_rcv+0x64/0x1ac)
   (tcp_v4_do_rcv) from [<805a9724>] (tcp_v4_rcv+0xa34/0xb74)
   (tcp_v4_rcv) from [<80581d34>] (ip_local_deliver_finish+0x78/0x2b0)
   (ip_local_deliver_finish) from [<8058259c>] (ip_local_deliver+0xe4/0x104)
   (ip_local_deliver) from [<805d23ec>] (xfrm4_transport_finish+0xf4/0x144)
   (xfrm4_transport_finish) from [<805df564>] (xfrm_input+0x4f4/0x74c)
   (xfrm_input) from [<804de420>] (artpec6_crypto_task+0x208/0x38c)
   (artpec6_crypto_task) from [<801271b0>] (tasklet_action+0x60/0xec)
   (tasklet_action) from [<801266d4>] (__do_softirq+0xcc/0x3a4)
   (__do_softirq) from [<80126d20>] (irq_exit+0xf4/0x15c)
   (irq_exit) from [<801741e8>] (__handle_domain_irq+0x68/0xbc)
   (__handle_domain_irq) from [<801014f0>] (gic_handle_irq+0x50/0x94)
   (gic_handle_irq) from [<80657370>] (__irq_usr+0x50/0x80)

Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>