review.tizen.org Git - platform/kernel/linux-starfive.git/log

cpufreq: amd-pstate: fix kernel hang issue while amd-pstate unregistering

commit 4f3085f87b51a551a0647f218d4f324796ecb703 upstream.

In the amd_pstate_adjust_perf(), there is one cpufreq_cpu_get() call to
increase increments the kobject reference count of policy and make it as
busy. Therefore, a corresponding call to cpufreq_cpu_put() is needed to
decrement the kobject reference count back, it will resolve the kernel
hang issue when unregistering the amd-pstate driver and register the
`amd_pstate_epp` driver instance.

Fixes: 1d215f0319 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

elfcore: Add a cprm parameter to elf_core_extra_{phdrs,data_size}

commit 19e183b54528f11fafeca60fc6d0821e29ff281e upstream.

A subsequent fix for arm64 will use this parameter to parse the vma
information from the snapshot created by dump_vma_snapshot() rather than
traversing the vma list without the mmap_lock.

Fixes: 6dd8b1a0b6cb ("arm64: mte: Dump the MTE tags in the core file")
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Seth Jenkins <sethjenkins@google.com>
Suggested-by: Seth Jenkins <sethjenkins@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221222181251.1345752-3-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: qcom: lpass-cpu: Fix fallback SD line index handling

commit 000bca8d706d1bf7cca01af75787247c5a2fdedf upstream.

These indices should reference the ID placed within the dai_driver
array, not the indices of the array itself.

This fixes commit 4ff028f6c108 ("ASoC: qcom: lpass-cpu: Make I2S SD
lines configurable"), which among others, broke IPQ8064 audio
(sound/soc/qcom/lpass-ipq806x.c) because it uses ID 4 but we'd stop
initializing the mi2s_playback_sd_mode and mi2s_capture_sd_mode arrays
at ID 0.

Fixes: 4ff028f6c108 ("ASoC: qcom: lpass-cpu: Make I2S SD lines configurable")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20221231061545.2110253-1-computersforpeace@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: Prefer DT board type over DMI board type

commit a5a36720c3f650f859f5e9535dd62d06f13f4f3b upstream.

The introduction of support for Apple board types inadvertently changed
the precedence order, causing hybrid SMBIOS+DT platforms to look up the
firmware using the DMI information instead of the device tree compatible
to generate the board type. Revert back to the old behavior,
as affected platforms use firmwares named after the DT compatible.

Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties")
[1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13

Cc: stable@vger.kernel.org
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kexec: fix ipl report address for kdump

commit c2337a40e04dde1692b5b0a46ecc59f89aaba8a1 upstream.

This commit addresses the following erroneous situation with file-based
kdump executed on a system with a valid IPL report.

On s390, a kdump kernel, its initrd and IPL report if present are loaded
into a special and reserved on boot memory region - crashkernel. When
a system crashes and kdump was activated before, the purgatory code
is entered first which swaps the crashkernel and [0 - crashkernel size]
memory regions. Only after that the kdump kernel is entered. For this
reason, the pointer to an IPL report in lowcore must point to the IPL report
after the swap and not to the address of the IPL report that was located in
crashkernel memory region before the swap. Failing to do so, makes the
kdump's decompressor try to read memory from the crashkernel memory region
which already contains the production's kernel memory.

The situation described above caused spontaneous kdump failures/hangs
on systems where the Secure IPL is activated because on such systems
an IPL report is always present. In that case kdump's decompressor tried
to parse an IPL report which frequently lead to illegal memory accesses
because an IPL report contains addresses to various data.

Cc: <stable@vger.kernel.org>
Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel")
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf auxtrace: Fix address filter duplicate symbol selection

commit cf129830ee820f7fc90b98df193cd49d49344d09 upstream.

When a match has been made to the nth duplicate symbol, return
success not error.

Example:

  Before:

    $ cat file.c
    cat: file.c: No such file or directory
    $ cat file1.c
    #include <stdio.h>

    static void func(void)
    {
            printf("First func\n");
    }

    void other(void);

    int main()
    {
            func();
            other();
            return 0;
    }
    $ cat file2.c
    #include <stdio.h>

    static void func(void)
    {
            printf("Second func\n");
    }

    void other(void)
    {
            func();
    }

    $ gcc -Wall -Wextra -o test file1.c file2.c
    $ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
    Multiple symbols with name 'func'
    #1      0x1149  l       func
                    which is near           main
    #2      0x1179  l       func
                    which is near           other
    Disambiguate symbol name by inserting #n after the name e.g. func #2
    Or select a global symbol by inserting #0 or #g or #G
    Failed to parse address filter: 'filter func @ ./test'
    Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
    Where multiple filters are separated by space or comma.
    $ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
    Failed to parse address filter: 'filter func #2 @ ./test'
    Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
    Where multiple filters are separated by space or comma.

  After:

    $ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
    First func
    Second func
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 0.016 MB perf.data ]
    $ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns
    1231062.526977619:   tr strt                               0 [unknown] =>     558495708179 func
    1231062.526977619:   tr end  call               558495708188 func =>     558495708050 _init
    1231062.526979286:   tr strt                               0 [unknown] =>     55849570818d func
    1231062.526979286:   tr end  return             55849570818f func =>     55849570819d other

Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters")
Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: add aux timestamps fifo clearance wait

commit ae9dcb91c6069e20b3b9505d79cbc89fd6e086f5 upstream.

Add timeout polling wait for auxiliary timestamps snapshot FIFO clear bit
(ATSFC) to clear. This is to ensure no residue fifo value is being read
erroneously.

Fixes: f4da56529da6 ("net: stmmac: Add support for external trigger timestamping")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Link: https://lore.kernel.org/r/20230111050200.2130-1-noor.azura.ahmad.tarmizi@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: Fix selecting wrong ACPI fwnode for the iGPU on some Dell laptops

commit f64e4275ef7407d5c3eca20436519bbd1f796e40 upstream.

The Dell Latitude E6430 both with and without the optional NVidia dGPU
has a bug in its ACPI tables which is causing Linux to assign the wrong
ACPI fwnode / companion to the pci_device for the i915 iGPU.

Specifically under the PCI root bridge there are these 2 ACPI Device()s :

Scope (_SB.PCI0)
{
     Device (GFX0)
     {
         Name (_ADR, 0x00020000)  // _ADR: Address
     }

     ...

     Device (VID)
     {
         Name (_ADR, 0x00020000)  // _ADR: Address
         ...

         Method (_DOS, 1, NotSerialized)  // _DOS: Disable Output Switching
         {
             VDP8 = Arg0
             VDP1 (One, VDP8)
         }

         Method (_DOD, 0, NotSerialized)  // _DOD: Display Output Devices
         {
             ...
         }
         ...
     }
}

The non-functional GFX0 ACPI device is a problem, because this gets
returned as ACPI companion-device by acpi_find_child_device() for the iGPU.

This is a long standing problem and the i915 driver does use the ACPI
companion for some things, but works fine without it.

However since commit 63f534b8bad9 ("ACPI: PCI: Rework acpi_get_pci_dev()")
acpi_get_pci_dev() relies on the physical-node pointer in the acpi_device
and that is set on the wrong acpi_device because of the wrong
acpi_find_child_device() return. This breaks the ACPI video code,
leading to non working backlight control in some cases.

Add a type.backlight flag, mark ACPI video bus devices with this and make
find_child_checks() return a higher score for children with this flag set,
so that it picks the right companion-device.

Fixes: 63f534b8bad9 ("ACPI: PCI: Rework acpi_get_pci_dev()")
Co-developed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: cmpxchg_double*: hazard against entire exchange variable

commit 031af50045ea97ed4386eb3751ca2c134d0fc911 upstream.

The inline assembly for arm64's cmpxchg_double*() implementations use a
+Q constraint to hazard against other accesses to the memory location
being exchanged. However, the pointer passed to the constraint is a
pointer to unsigned long, and thus the hazard only applies to the first
8 bytes of the location.

GCC can take advantage of this, assuming that other portions of the
location are unchanged, leading to a number of potential problems.

This is similar to what we fixed back in commit:

  fee960bed5e857eb ("arm64: xchg: hazard against entire exchange variable")

... but we forgot to adjust cmpxchg_double*() similarly at the same
time.

The same problem applies, as demonstrated with the following test:

| struct big {
|         u64 lo, hi;
| } __aligned(128);
|
| unsigned long foo(struct big *b)
| {
|         u64 hi_old, hi_new;
|
|         hi_old = b->hi;
|         cmpxchg_double_local(&b->lo, &b->hi, 0x12, 0x34, 0x56, 0x78);
|         hi_new = b->hi;
|
|         return hi_old ^ hi_new;
| }

... which GCC 12.1.0 compiles as:

| 0000000000000000 <foo>:
|    0:   d503233f        paciasp
|    4:   aa0003e4        mov     x4, x0
|    8:   1400000e        b       40 <foo+0x40>
|    c:   d2800240        mov     x0, #0x12                       // #18
|   10:   d2800681        mov     x1, #0x34                       // #52
|   14:   aa0003e5        mov     x5, x0
|   18:   aa0103e6        mov     x6, x1
|   1c:   d2800ac2        mov     x2, #0x56                       // #86
|   20:   d2800f03        mov     x3, #0x78                       // #120
|   24:   48207c82        casp    x0, x1, x2, x3, [x4]
|   28:   ca050000        eor     x0, x0, x5
|   2c:   ca060021        eor     x1, x1, x6
|   30:   aa010000        orr     x0, x0, x1
|   34:   d2800000        mov     x0, #0x0                        // #0    <--- BANG
|   38:   d50323bf        autiasp
|   3c:   d65f03c0        ret
|   40:   d2800240        mov     x0, #0x12                       // #18
|   44:   d2800681        mov     x1, #0x34                       // #52
|   48:   d2800ac2        mov     x2, #0x56                       // #86
|   4c:   d2800f03        mov     x3, #0x78                       // #120
|   50:   f9800091        prfm    pstl1strm, [x4]
|   54:   c87f1885        ldxp    x5, x6, [x4]
|   58:   ca0000a5        eor     x5, x5, x0
|   5c:   ca0100c6        eor     x6, x6, x1
|   60:   aa0600a6        orr     x6, x5, x6
|   64:   b5000066        cbnz    x6, 70 <foo+0x70>
|   68:   c8250c82        stxp    w5, x2, x3, [x4]
|   6c:   35ffff45        cbnz    w5, 54 <foo+0x54>
|   70:   d2800000        mov     x0, #0x0                        // #0     <--- BANG
|   74:   d50323bf        autiasp
|   78:   d65f03c0        ret

Notice that at the lines with "BANG" comments, GCC has assumed that the
higher 8 bytes are unchanged by the cmpxchg_double() call, and that
`hi_old ^ hi_new` can be reduced to a constant zero, for both LSE and
LL/SC versions of cmpxchg_double().

This patch fixes the issue by passing a pointer to __uint128_t into the
+Q constraint, ensuring that the compiler hazards against the entire 16
bytes being modified.

With this change, GCC 12.1.0 compiles the above test as:

| 0000000000000000 <foo>:
|    0:   f9400407        ldr     x7, [x0, #8]
|    4:   d503233f        paciasp
|    8:   aa0003e4        mov     x4, x0
|    c:   1400000f        b       48 <foo+0x48>
|   10:   d2800240        mov     x0, #0x12                       // #18
|   14:   d2800681        mov     x1, #0x34                       // #52
|   18:   aa0003e5        mov     x5, x0
|   1c:   aa0103e6        mov     x6, x1
|   20:   d2800ac2        mov     x2, #0x56                       // #86
|   24:   d2800f03        mov     x3, #0x78                       // #120
|   28:   48207c82        casp    x0, x1, x2, x3, [x4]
|   2c:   ca050000        eor     x0, x0, x5
|   30:   ca060021        eor     x1, x1, x6
|   34:   aa010000        orr     x0, x0, x1
|   38:   f9400480        ldr     x0, [x4, #8]
|   3c:   d50323bf        autiasp
|   40:   ca0000e0        eor     x0, x7, x0
|   44:   d65f03c0        ret
|   48:   d2800240        mov     x0, #0x12                       // #18
|   4c:   d2800681        mov     x1, #0x34                       // #52
|   50:   d2800ac2        mov     x2, #0x56                       // #86
|   54:   d2800f03        mov     x3, #0x78                       // #120
|   58:   f9800091        prfm    pstl1strm, [x4]
|   5c:   c87f1885        ldxp    x5, x6, [x4]
|   60:   ca0000a5        eor     x5, x5, x0
|   64:   ca0100c6        eor     x6, x6, x1
|   68:   aa0600a6        orr     x6, x5, x6
|   6c:   b5000066        cbnz    x6, 78 <foo+0x78>
|   70:   c8250c82        stxp    w5, x2, x3, [x4]
|   74:   35ffff45        cbnz    w5, 5c <foo+0x5c>
|   78:   f9400480        ldr     x0, [x4, #8]
|   7c:   d50323bf        autiasp
|   80:   ca0000e0        eor     x0, x7, x0
|   84:   d65f03c0        ret

... sampling the high 8 bytes before and after the cmpxchg, and
performing an EOR, as we'd expect.

For backporting, I've tested this atop linux-4.9.y with GCC 5.5.0. Note
that linux-4.9.y is oldest currently supported stable release, and
mandates GCC 5.1+. Unfortunately I couldn't get a GCC 5.1 binary to run
on my machines due to library incompatibilities.

I've also used a standalone test to check that we can use a __uint128_t
pointer in a +Q constraint at least as far back as GCC 4.8.5 and LLVM
3.9.1.

Fixes: 5284e1b4bc8a ("arm64: xchg: Implement cmpxchg_double")
Fixes: e9a4b795652f ("arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU")
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/lkml/Y6DEfQXymYVgL3oJ@boqun-archlinux/
Reported-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/Y6GXoO4qmH9OIZ5Q@hirez.programming.kicks-ass.net/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230104151626.3262137-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mte: Avoid the racy walk of the vma list during core dump

commit 4f4c549feb4ecca95ae9abb88887b941d196f83a upstream.

The MTE coredump code in arch/arm64/kernel/elfcore.c iterates over the
vma list without the mmap_lock held. This can race with another process
or userfaultfd concurrently modifying the vma list. Change the
for_each_mte_vma macro and its callers to instead use the vma snapshot
taken by dump_vma_snapshot() and stored in the cprm object.

Fixes: 6dd8b1a0b6cb ("arm64: mte: Dump the MTE tags in the core file")
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Seth Jenkins <sethjenkins@google.com>
Suggested-by: Seth Jenkins <sethjenkins@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221222181251.1345752-4-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mte: Fix double-freeing of the temporary tag storage during coredump

commit 736eedc974eaafbf4360e0ea85fc892cea72a223 upstream.

Commit 16decce22efa ("arm64: mte: Fix the stack frame size warning in
mte_dump_tag_range()") moved the temporary tag storage array from the
stack to slab but it also introduced an error in double freeing this
object. Remove the in-loop freeing.

Fixes: 16decce22efa ("arm64: mte: Fix the stack frame size warning in mte_dump_tag_range()")
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Seth Jenkins <sethjenkins@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221222181251.1345752-2-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/poll: add hash if ready poll request can't complete inline

commit febb985c06cb6f5fac63598c0bffd4fd823d110d upstream.

If we don't, then we may lose access to it completely, leading to a
request leak. This will eventually stall the ring exit process as
well.

Cc: stable@vger.kernel.org
Fixes: 49f1c68e048f ("io_uring: optimise submission side poll_refs")
Reported-and-tested-by: syzbot+6c95df01470a47fc3af4@syzkaller.appspotmail.com
Link: https://lore.kernel.org/io-uring/0000000000009f829805f1ce87b2@google.com/
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

docs: Fix the docs build with Sphinx 6.0

commit 0283189e8f3d0917e2ac399688df85211f48447b upstream.

Sphinx 6.0 removed the execfile_() function, which we use as part of the
configuration process. They *did* warn us... Just open-code the
functionality as is done in Sphinx itself.

Tested (using SPHINX_CONF, since this code is only executed with an
alternative config file) on various Sphinx versions from 2.5 through 6.0.

Reported-by: Martin Liška <mliska@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: tpm: Avoid READ_ONCE() for accessing the event log

commit d3f450533bbcb6dd4d7d59cadc9b61b7321e4ac1 upstream.

Nathan reports that recent kernels built with LTO will crash when doing
EFI boot using Fedora's GRUB and SHIM. The culprit turns out to be a
misaligned load from the TPM event log, which is annotated with
READ_ONCE(), and under LTO, this gets translated into a LDAR instruction
which does not tolerate misaligned accesses.

Interestingly, this does not happen when booting the same kernel
straight from the UEFI shell, and so the fact that the event log may
appear misaligned in memory may be caused by a bug in GRUB or SHIM.

However, using READ_ONCE() to access firmware tables is slightly unusual
in any case, and here, we only need to ensure that 'event' is not
dereferenced again after it gets unmapped, but this is already taken
care of by the implicit barrier() semantics of the early_memunmap()
call.

Cc: <stable@vger.kernel.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1782
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: fix userspace infinite retry read efivars after EFI runtime services page fault

commit e006ac3003080177cf0b673441a4241f77aaecce upstream.

After [1][2], if we catch exceptions due to EFI runtime service, we will
clear EFI_RUNTIME_SERVICES bit to disable EFI runtime service, then the
subsequent routine which invoke the EFI runtime service should fail.

But the userspace cat efivars through /sys/firmware/efi/efivars/ will stuck
and infinite loop calling read() due to efivarfs_file_read() return -EINTR.

The -EINTR is converted from EFI_ABORTED by efi_status_to_err(), and is
an improper return value in this situation, so let virt_efi_xxx() return
EFI_DEVICE_ERROR and converted to -EIO to invoker.

Cc: <stable@vger.kernel.org>
Fixes: 3425d934fc03 ("efi/x86: Handle page faults occurring while running EFI runtime services")
Fixes: 23715a26c8d8 ("arm64: efi: Recover from synchronous exceptions occurring in firmware")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Fix S1PTW handling on RO memslots

commit 406504c7b0405d74d74c15a667cd4c4620c3e7a9 upstream.

A recent development on the EFI front has resulted in guests having
their page tables baked in the firmware binary, and mapped into the
IPA space as part of a read-only memslot. Not only is this legitimate,
but it also results in added security, so thumbs up.

It is possible to take an S1PTW translation fault if the S1 PTs are
unmapped at stage-2. However, KVM unconditionally treats S1PTW as a
write to correctly handle hardware AF/DB updates to the S1 PTs.
Furthermore, KVM injects an exception into the guest for S1PTW writes.
In the aforementioned case this results in the guest taking an abort
it won't recover from, as the S1 PTs mapping the vectors suffer from
the same problem.

So clearly our handling is... wrong.

Instead, switch to a two-pronged approach:

- On S1PTW translation fault, handle the fault as a read

- On S1PTW permission fault, handle the fault as a write

This is of no consequence to SW that *writes* to its PTs (the write
will trigger a non-S1PTW fault), and SW that uses RO PTs will not
use HW-assisted AF/DB anyway, as that'd be wrong.

Only in the case described in c4ad98e4b72c ("KVM: arm64: Assume write
fault on S1PTW permission fault on instruction fetch") do we end-up
with two back-to-back faults (page being evicted and faulted back).
I don't think this is a case worth optimising for.

Fixes: c4ad98e4b72c ("KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch")
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Regression-tested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Do not return host topology information from KVM_GET_SUPPORTED_CPUID

commit 45e966fcca03ecdcccac7cb236e16eea38cc18af upstream.

Passing the host topology to the guest is almost certainly wrong
and will confuse the scheduler. In addition, several fields of
these CPUID leaves vary on each processor; it is simply impossible to
return the right values from KVM_GET_SUPPORTED_CPUID in such a way that
they can be passed to KVM_SET_CPUID2.

The values that will most likely prevent confusion are all zeroes.
Userspace will have to override it anyway if it wishes to present a
specific topology to the guest.

Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Enable mute/micmute LEDs on HP Spectre x360 13-aw0xxx

commit ca88eeb308a221c2dcd4a64031d2e5fcd3db9eaa upstream.

The HP Spectre x360 13-aw0xxx devices use the ALC285 codec with GPIO 0x04
controlling the micmute LED and COEF 0x0b index 8 controlling the mute LED.
A quirk was added to make these work as well as a fixup.

Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230110202514.2792-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Turn on power early

commit 1f680609bf1beac20e2a31ddcb1b88874123c39f upstream.

Turn on power early to avoid wrong state for power relation register.
This can earlier update JD state when resume back.

Signed-off-by: Yuchi Yang <yangyuchi66@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/e35d8f4fa18f4448a2315cc7d4a3715f@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Always initialize fixed_rate in snd_usb_find_implicit_fb_sync_format()

commit 291e9da91403e0e628d7692b5ed505100e7b7706 upstream.

Handle the fallback code path, too.

Fixes: fd28941cff1c ("ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless")
BugLink: https://lore.kernel.org/alsa-devel/Y7frf3N%2FxzvESEsN@kili/
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230109141133.335543-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: control-led: use strscpy in set_led_id()

commit 70051cffb31b5ee09096351c3b41fcae6f89de31 upstream.

The use of strncpy() in the set_led_id() was incorrect.
The len variable should use 'min(sizeof(buf2) - 1, count)'
expression.

Use strscpy() function to simplify things and handle the error gracefully.

Fixes: a135dfb5de15 ("ALSA: led control - add sysfs kcontrol LED marking layer")
Reported-by: yang.yang29@zte.com.cn
Link: https://lore.kernel.org/alsa-devel/202301091945513559977@zte.com.cn/
Cc: <stable@vger.kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ALSA: usb-audio: Drop superfluous interface setup at parsing"

commit 16f1f838442dc6430d32d51ddda347b8421ec34b upstream.

This reverts commit ac5e2fb425e1121ceef2b9d1b3ffccc195d55707.

The commit caused a regression on Behringer UMC404HD (and likely
others). As the change was meant only as a minor optimization, it's
better to revert it to address the regression.

Reported-and-tested-by: Michael Ralston <michael@ralston.id.au>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAC2975JXkS1A5Tj9b02G_sy25ZWN-ys+tc9wmkoS=qPgKCogSg@mail.gmail.com
Link: https://lore.kernel.org/r/20230104150944.24918-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits

commit 696e1a48b1a1b01edad542a1ef293665864a4dd0 upstream.

If the offset + length goes over the ethernet + vlan header, then the
length is adjusted to copy the bytes that are within the boundaries of
the vlan_ethhdr scratchpad area. The remaining bytes beyond ethernet +
vlan header are copied directly from the skbuff data area.

Fix incorrect arithmetic operator: subtract, not add, the size of the
vlan header in case of double-tagged packets to adjust the length
accordingly to address CVE-2023-0179.

Reported-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Fixes: f6ae9f120dad ("netfilter: nft_payload: add C-VLAN support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.1.6

Link: https://lore.kernel.org/r/20230112135326.981869724@linuxfoundation.org
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: cs35l41: Check runtime suspend capability at runtime_idle

commit ae50e2ab122cef68f46b7799fb9deffe3334f5e2 upstream.

The runtime PM core checks with runtime_idle callback whether it can
goes to the runtime suspend or not, and we can put the boost type
check there instead of runtime_suspend and _resume calls. This will
reduce the unnecessary runtime_suspend() calls.

Fixes: 1873ebd30cc8 ("ALSA: hda: cs35l41: Support Hibernation during Suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230105093531.16960-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Enable headset mic on another Dell laptop with ALC3254

commit a5751933a7f6abbdad90d98f25a25bb4b133a9e6 upstream.

There is another Dell Latitude laptop (1028:0c03) with Realtek
codec ALC3254 which needs the ALC269_FIXUP_DELL4_MIC_NO_PRESENCE
instead of the default matched ALC269_FIXUP_DELL1_MIC_NO_PRESENCE.
Apply correct fixup for this particular model to enable headset mic.

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230103095332.730677-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: cs35l41: Don't return -EINVAL from system suspend/resume

commit 15a59cb0a3d6ddf2cb79f8dc3081b3130aad3767 upstream.

The recent commit to support the system suspend for CS35L41 caused a
regression on the models with CS35L41_EXT_BOOST_NO_VSPK_SWITC boost
type, as the suspend/resume callbacks just return -EINVAL. This is
eventually handled as a fatal error and blocks the whole system
suspend/resume.

For avoiding the problem, this patch corrects the return code from
cs35l41_system_suspend() and _resume() to 0, and replace dev_err()
with dev_err_once() for stop spamming too much.

Fixes: 88672826e2a4 ("ALSA: hda: cs35l41: Support System Suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/e6751ac2-34f3-d13f-13db-8174fade8308@pm.me
Link: https://lore.kernel.org/r/20230105093531.16960-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform

commit 9c694fbfe6f36017b060ad74c7565cb379852e40 upstream.

There is a HP platform uses ALC236 codec which using GPIO2 to control
mute LED and GPIO1 to control micmute LED.
Thus, add a quirk to make them work.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230105044154.8242-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/hdmi: Add a HP device 0x8715 to force connect list

commit de1ccb9e61728dd941fe0e955a7a129418657267 upstream.

Add the 'HP Engage Flex Mini' device to the force connect list to
enable audio through HDMI.

Signed-off-by: Adrian Chan <adchan@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230109210520.16060-1-adchan@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF

commit 56b88b50565cd8b946a2d00b0c83927b7ebb055e upstream.

Takes rwsem lock inside snd_ctl_elem_read instead of snd_ctl_elem_read_user
like it was done for write in commit 1fa4445f9adf1 ("ALSA: control - introduce
snd_ctl_notify_one() helper"). Doing this way we are also fixing the following
locking issue happening in the compat path which can be easily triggered and
turned into an use-after-free.

64-bits:
snd_ctl_ioctl
  snd_ctl_elem_read_user
    [takes controls_rwsem]
    snd_ctl_elem_read [lock properly held, all good]
    [drops controls_rwsem]

32-bits:
snd_ctl_ioctl_compat
  snd_ctl_elem_write_read_compat
    ctl_elem_write_read
      snd_ctl_elem_read [missing lock, not good]

CVE-2023-0266 was assigned for this issue.

Cc: stable@kernel.org # 5.13+
Signed-off-by: Clement Lecigne <clecigne@google.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230113120745.25464-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: disallow noqueue for qdisc classes

commit 96398560f26aa07e8f2969d73c8197e6a6d10407 upstream.

While experimenting with applying noqueue to a classful queue discipline,
we discovered a NULL pointer dereference in the __dev_queue_xmit()
path that generates a kernel OOPS:

    # dev=enp0s5
    # tc qdisc replace dev $dev root handle 1: htb default 1
    # tc class add dev $dev parent 1: classid 1:1 htb rate 10mbit
    # tc qdisc add dev $dev parent 1:1 handle 10: noqueue
    # ping -I $dev -w 1 -c 1 1.1.1.1

[    2.172856] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    2.173217] #PF: supervisor instruction fetch in kernel mode
...
[    2.178451] Call Trace:
[    2.178577]  <TASK>
[    2.178686]  htb_enqueue+0x1c8/0x370
[    2.178880]  dev_qdisc_enqueue+0x15/0x90
[    2.179093]  __dev_queue_xmit+0x798/0xd00
[    2.179305]  ? _raw_write_lock_bh+0xe/0x30
[    2.179522]  ? __local_bh_enable_ip+0x32/0x70
[    2.179759]  ? ___neigh_create+0x610/0x840
[    2.179968]  ? eth_header+0x21/0xc0
[    2.180144]  ip_finish_output2+0x15e/0x4f0
[    2.180348]  ? dst_output+0x30/0x30
[    2.180525]  ip_push_pending_frames+0x9d/0xb0
[    2.180739]  raw_sendmsg+0x601/0xcb0
[    2.180916]  ? _raw_spin_trylock+0xe/0x50
[    2.181112]  ? _raw_spin_unlock_irqrestore+0x16/0x30
[    2.181354]  ? get_page_from_freelist+0xcd6/0xdf0
[    2.181594]  ? sock_sendmsg+0x56/0x60
[    2.181781]  sock_sendmsg+0x56/0x60
[    2.181958]  __sys_sendto+0xf7/0x160
[    2.182139]  ? handle_mm_fault+0x6e/0x1d0
[    2.182366]  ? do_user_addr_fault+0x1e1/0x660
[    2.182627]  __x64_sys_sendto+0x1b/0x30
[    2.182881]  do_syscall_64+0x38/0x90
[    2.183085]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
...
[    2.187402]  </TASK>

Previously in commit d66d6c3152e8 ("net: sched: register noqueue
qdisc"), NULL was set for the noqueue discipline on noqueue init
so that __dev_queue_xmit() falls through for the noqueue case. This
also sets a bypass of the enqueue NULL check in the
register_qdisc() function for the struct noqueue_disc_ops.

Classful queue disciplines make it past the NULL check in
__dev_queue_xmit() because the discipline is set to htb (in this case),
and then in the call to __dev_xmit_skb(), it calls into htb_enqueue()
which grabs a leaf node for a class and then calls qdisc_enqueue() by
passing in a queue discipline which assumes ->enqueue() is not set to NULL.

Fix this by not allowing classes to be assigned to the noqueue
discipline. Linux TC Notes states that classes cannot be set to
the noqueue discipline. [1] Let's enforce that here.

Links:
1. https://linux-tc-notes.sourceforge.net/tc/doc/sch_noqueue.txt

Fixes: d66d6c3152e8 ("net: sched: register noqueue qdisc")
Cc: stable@vger.kernel.org
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20230109163906.706000-1-fred@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc: disable -Warray-bounds for gcc-11 too

commit 5a41237ad1d4b62008f93163af1d9b1da90729d8 upstream.

We had already disabled this warning for gcc-12 due to bugs in the value
range analysis, but it turns out we end up having some similar problems
with gcc-11.3 too, so let's disable it there too.

Older gcc versions end up being increasingly less relevant, and
hopefully clang and newer version of gcc (ie gcc-13) end up working
reliably enough that we still get the build coverage even when we
disable this for some versions.

Link: https://lore.kernel.org/all/20221227002941.GA2691687@roeck-us.net/
Link: https://lore.kernel.org/all/D8BDBF66-E44C-45D4-9758-BAAA4F0C1998@kernel.org/
Cc: Kees Cook <kees@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "SUNRPC: Use RMW bitops in single-threaded hot paths"

commit 7827c81f0248e3c2f40d438b020f3d222f002171 upstream.

The premise that "Once an svc thread is scheduled and executing an
RPC, no other processes will touch svc_rqst::rq_flags" is false.
svc_xprt_enqueue() examines the RQ_BUSY flag in scheduled nfsd
threads when determining which thread to wake up next.

Found via KCSAN.

Fixes: 28df0988815f ("SUNRPC: Use RMW bitops in single-threaded hot paths")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/vm/pkeys: Add a regression test for setting PKRU through ptrace

commit 6ea25770b043c7997ab21d1ce95ba5de4d3d85d9 upstream.

This tests PTRACE_SETREGSET with NT_X86_XSTATE modifying PKRU directly and
removing the PKRU bit from XSTATE_BV.

Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-7-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Emulate XRSTOR's behavior if the xfeatures PKRU bit is not set

commit d7e5aceace514a2b1b3ca3dc44f93f1704766ca7 upstream.

The hardware XRSTOR instruction resets the PKRU register to its hardware
init value (namely 0) if the PKRU bit is not set in the xfeatures mask.
Emulating that here restores the pre-5.14 behavior for PTRACE_SET_REGSET
with NT_X86_XSTATE, and makes sigreturn (which still uses XRSTOR) and
ptrace behave identically. KVM has never used XRSTOR and never had this
behavior, so KVM opts-out of this emulation by passing a NULL pkru pointer
to copy_uabi_to_xstate().

Fixes: e84ba47e313d ("x86/fpu: Hook up PKRU into ptrace()")
Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-6-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Allow PKRU to be (once again) written by ptrace.

commit 4a804c4f8356393d6b5eff7600f07615d7869c13 upstream.

Move KVM's PKRU handling code in fpu_copy_uabi_to_guest_fpstate() to
copy_uabi_to_xstate() so that it is shared with other APIs that write the
XSTATE such as PTRACE_SETREGSET with NT_X86_XSTATE.

This restores the pre-5.14 behavior of ptrace. The regression can be seen
by running gdb and executing `p $pkru`, `set $pkru = 42`, and `p $pkru`.
On affected kernels (5.14+) the write to the PKRU register (which gdb
performs through ptrace) is ignored.

[ dhansen: removed stable@ tag for now.  The ABI was broken for long
   enough that this is not urgent material.  Let's let it stew
   in tip for a few weeks before it's submitted to stable
   because there are so many ABIs potentially affected. ]

Fixes: e84ba47e313d ("x86/fpu: Hook up PKRU into ptrace()")
Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-5-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Add a pkru argument to copy_uabi_to_xstate()

commit 2c87767c35ee9744f666ccec869d5fe742c3de0a upstream.

In preparation for moving PKRU handling code out of
fpu_copy_uabi_to_guest_fpstate() and into copy_uabi_to_xstate(), add an
argument that copy_uabi_from_kernel_to_xstate() can use to pass the
canonical location of the PKRU value. For
copy_sigframe_from_user_to_xstate() the kernel will actually restore the
PKRU value from the fpstate, but pass in the thread_struct's pkru location
anyways for consistency.

Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-4-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Add a pkru argument to copy_uabi_from_kernel_to_xstate().

commit 1c813ce0305571e1b2e4cc4acca451da9e6ad18f upstream.

Both KVM (through KVM_SET_XSTATE) and ptrace (through PTRACE_SETREGSET
with NT_X86_XSTATE) ultimately call copy_uabi_from_kernel_to_xstate(),
but the canonical locations for the current PKRU value for KVM guests
and processes in a ptrace stop are different (in the kvm_vcpu_arch and
the thread_state structs respectively).

In preparation for eventually handling PKRU in
copy_uabi_to_xstate, pass in a pointer to the PKRU location.

Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-3-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Take task_struct* in copy_sigframe_from_user_to_xstate()

commit 6a877d2450ace4f27c012519e5a1ae818f931983 upstream.

This will allow copy_sigframe_from_user_to_xstate() to grab the address of
thread_struct's pkru value in a later patch.

Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-2-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Align parisc MADV_XXX constants with all other architectures

commit 71bdea6f798b425bc0003780b13e3fdecb16a010 upstream.

Adjust some MADV_XXX constants to be in sync what their values are on
all other platforms. There is currently no reason to have an own
numbering on parisc, but it requires workarounds in many userspace
sources (e.g. glibc, qemu, ...) - which are often forgotten and thus
introduce bugs and different behaviour on parisc.

A wrapper avoids an ABI breakage for existing userspace applications by
translating any old values to the new ones, so this change allows us to
move over all programs to the new ABI over time.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.1.5

Link: https://lore.kernel.org/r/20230110180018.288460217@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Fenil Jain <fkjainco@gmail.com>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: ath11k: Send PME message during wakeup from D3cold

commit 3f9b09ccf7d5f23066b02881a737bee42def9d1a upstream.

We are seeing system stuck on some specific platforms due to
WLAN chip fails to wakeup from D3cold state.

With this flag, firmware will send PME message during wakeup
and this issue is gone.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20221010033237.415478-1-quic_bqiang@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: random: combine bootloader provided RNG seed with RNG protocol output

commit 196dff2712ca5a2e651977bb2fe6b05474111a83 upstream.

Instead of blindly creating the EFI random seed configuration table if
the RNG protocol is implemented and works, check whether such a EFI
configuration table was provided by an earlier boot stage and if so,
concatenate the existing and the new seeds, leaving it up to the core
code to mix it in and credit it the way it sees fit.

This can be used for, e.g., systemd-boot, to pass an additional seed to
Linux in a way that can be consumed by the kernel very early. In that
case, the following definitions should be used to pass the seed to the
EFI stub:

struct linux_efi_random_seed {
      u32     size; // of the 'seed' array in bytes
      u8      seed[];
};

The memory for the struct must be allocated as EFI_ACPI_RECLAIM_MEMORY
pool memory, and the address of the struct in memory should be installed
as a EFI configuration table using the following GUID:

LINUX_EFI_RANDOM_SEED_TABLE_GUID        1ce1e5bc-7ceb-42f2-81e5-8aadf180f57b

Note that doing so is safe even on kernels that were built without this
patch applied, but the seed will simply be overwritten with a seed
derived from the EFI RNG protocol, if available. The recommended seed
size is 32 bytes, and seeds larger than 512 bytes are considered
corrupted and ignored entirely.

In order to preserve forward secrecy, seeds from previous bootloaders
are memzero'd out, and in order to preserve memory, those older seeds
are also freed from memory. Freeing from memory without first memzeroing
is not safe to do, as it's possible that nothing else will ever
overwrite those pages used by EFI.

Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ardb: incorporate Jason's followup changes to extend the maximum seed
       size on the consumer end, memzero() it and drop a needless printk]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index

commit 6217e9f05a74df48c77ee68993d587cdfdb1feb7 upstream.

Due to copy-paste fail, MIPI_BKLT_EN_1 would always use PPS index 1,
never 0. Fix the sloppiest commit in recent memory.

Fixes: 963bbdb32b47 ("drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220140105.313333-1-jani.nikula@intel.com
(cherry picked from commit a561933c571798868b5fa42198427a7e6df56c09)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence

commit 963bbdb32b47cfa67a449e715e1dcc525fbd01fc upstream.

Starting from ICL, the default for MIPI GPIO sequences seems to be using
native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse
many pins that quite frankly seem scary to poke based on the VBT
sequences. We pretty much have to trust that the board is configured
such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for
anything else.

MIPI sequence v4 also adds a flag to fall back to non-native sequences.

v5:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler()
too (Ville)
- References instead of Closes issue 6131 because this does not fix everything

v4:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville)

v3:
- Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>)

v2:
- Fix HPD pin output set (impacts GPIOs 0 and 5)
- Fix GPIO data output direction set (impacts GPIOs 4 and 9)
- Reduce register accesses to single intel_de_rwm()

References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com
(cherry picked from commit f087cfe6fcff58044f7aa3b284965af47f472fb0)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: check nt_len to be at least CIFS_ENCPWD_SIZE in ksmbd_decode_ntlmssp_auth_blob

commit 797805d81baa814f76cf7bdab35f86408a79d707 upstream.

"nt_len - CIFS_ENCPWD_SIZE" is passed directly from
ksmbd_decode_ntlmssp_auth_blob to ksmbd_auth_ntlmv2. Malicious requests
can set nt_len to less than CIFS_ENCPWD_SIZE, which results in a negative
number (or large unsigned value) used for a subsequent memcpy in
ksmbd_auth_ntlvm2 and can cause a panic.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: William Liu <will@willsroot.io>
Signed-off-by: Hrvoje Mišetić <misetichrvoje@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: send proper error response in smb2_tree_connect()

commit cdfb2fef522d0c3f9cf293db51de88e9b3d46846 upstream.

Currently, smb2_tree_connect doesn't send an error response packet on
error.

This causes libsmb2 to skip the specific error code and fail with the
following:
smb2_service failed with : Failed to parse fixed part of command
payload. Unexpected size of Error reply. Expected 9, got 8

Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix infinite loop in ksmbd_conn_handler_loop()

commit 83dcedd5540d4ac61376ddff5362f7d9f866a6ec upstream.

If kernel_recvmsg() return -EAGAIN in ksmbd_tcp_readv() and go round
again, It will cause infinite loop issue. And all threads from next
connections would be doing that. This patch add max retry count(2) to
avoid it. kernel_recvmsg() will wait during 7sec timeout and try to
retry two time if -EAGAIN is returned. And add flags of kvmalloc to
__GFP_NOWARN and __GFP_NORETRY to disconnect immediately without
retrying on memory alloation failure.

Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18259
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: handle case when repair happens with dev-replace

[ Upstream commit d73a27b86fc722c28a26ec64002e3a7dc86d1c07 ]

[BUG]
There is a bug report that a BUG_ON() in btrfs_repair_io_failure()
(originally repair_io_failure() in v6.0 kernel) got triggered when
replacing a unreliable disk:

  BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3
  kernel BUG at fs/btrfs/extent_io.c:2380!
  invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G           OE      6.0.0-5-amd64 #1  Debian 6.0.10-2
  Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021
  Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
  RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs]
  Call Trace:
   <TASK>
   clean_io_failure+0x14d/0x180 [btrfs]
   end_bio_extent_readpage+0x412/0x6e0 [btrfs]
   ? __switch_to+0x106/0x420
   process_one_work+0x1c7/0x380
   worker_thread+0x4d/0x380
   ? rescuer_thread+0x3a0/0x3a0
   kthread+0xe9/0x110
   ? kthread_complete_and_exit+0x20/0x20
   ret_from_fork+0x22/0x30

[CAUSE]

Before the BUG_ON(), we got some read errors from the replace target
first, note the mirror number (3, which is beyond RAID1 duplication,
thus it's read from the replace target device).

Then at the BUG_ON() location, we are trying to writeback the repaired
sectors back the failed device.

The check looks like this:

ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical,
      &map_length, &bioc, mirror_num);
if (ret)
goto out_counter_dec;
BUG_ON(mirror_num != bioc->mirror_num);

But inside btrfs_map_block(), we can modify bioc->mirror_num especially
for dev-replace:

if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 &&
    !need_full_stripe(op) && dev_replace->tgtdev != NULL) {
ret = get_extra_mirror_from_replace(fs_info, logical, *length,
    dev_replace->srcdev->devid,
    &mirror_num,
    &physical_to_patch_in_first_stripe);
patch_the_first_stripe_for_dev_replace = 1;
}

Thus if we're repairing the replace target device, we're going to
trigger that BUG_ON().

But in reality, the read failure from the replace target device may be
that, our replace hasn't reached the range we're reading, thus we're
reading garbage, but with replace running, the range would be properly
filled later.

Thus in that case, we don't need to do anything but let the replace
routine to handle it.

[FIX]
Instead of a BUG_ON(), just skip the repair if we're repairing the
device replace target device.

Reported-by: 小太 <nospam@kota.moe>
Link: https://lore.kernel.org/linux-btrfs/CACsxjPYyJGQZ+yvjzxA1Nn2LuqkYqTCcUH43S=+wXhyf8S00Ag@mail.gmail.com/
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Uninitialized variables causing 4k60 UCLK to stay at DPM1 and not DPM0

[ Upstream commit f3c23bea598ab7e8e4b8c5ca66598921310f718e ]

[Why]
SwathSizePerSurfaceY[] and SwathSizePerSurfaceC[] values are uninitialized
because we are using += instead of = operator.

[How]
Assign values in loop with = operator.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x, 6.1.x
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Add check for DET fetch latency hiding for dcn32

[ Upstream commit 6d4727c80947de0e6fad58b196a9d215e3b32608 ]

[WHY?]
Some configurations are constructed with very marginal DET buffers relative to
the worst possible time required to fetch a swath.

[HOW?]
Add a check to see that the DET buffer allocated for each pipe can hide the
latency for all pipes to fetch at least one swath.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: f3c23bea598a ("drm/amd/display: Uninitialized variables causing 4k60 UCLK to stay at DPM1 and not DPM0")
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_blk: Fix signedness bug in virtblk_prep_rq()

[ Upstream commit a26116c1e74028914f281851488546c91cbae57d ]

The virtblk_map_data() function returns negative error codes, however, the
'nents' field of vbr->sg_table is an unsigned int, which causes the error
handling not to work correctly.

Cc: stable@vger.kernel.org
Fixes: 0e9911fa768f ("virtio-blk: support mq_ops->queue_rqs()")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Message-Id: <20221021204126.927603-1-rafaelmendsr@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Suwan Kim <suwan.kim027@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-blk: use a helper to handle request queuing errors

[ Upstream commit 258896fcc786b4e7db238eba26f6dd080e0ff41e ]

Define a new helper function, virtblk_fail_to_queue(), to
clean up the error handling code in virtio_queue_rq().

Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20221016034127.330942-2-dmitry.fomichev@wdc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stable-dep-of: a26116c1e740 ("virtio_blk: Fix signedness bug in virtblk_prep_rq()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/gvt: fix vgpu debugfs clean in remove

commit 704f3384f322b40ba24d958473edfb1c9750c8fd upstream.

Check carefully on root debugfs available when destroying vgpu,
e.g in remove case drm minor's debugfs root might already be destroyed,
which led to kernel oops like below.

Console: switching to colour dummy device 80x25
i915 0000:00:02.0: MDEV: Unregistering
intel_vgpu_mdev b1338b2d-a709-4c23-b766-cc436c36cdf0: Removing from iommu group 14
BUG: kernel NULL pointer dereference, address: 0000000000000150
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 1046 Comm: driverctl Not tainted 6.1.0-rc2+ #6
Hardware name: HP HP ProDesk 600 G3 MT/829D, BIOS P02 Ver. 02.44 09/13/2022
RIP: 0010:__lock_acquire+0x5e2/0x1f90
Code: 87 ad 09 00 00 39 05 e1 1e cc 02 0f 82 f1 09 00 00 ba 01 00 00 00 48 83 c4 48 89 d0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 45 31 ff <48> 81 3f 60 9e c2 b6 45 0f 45 f8 83 fe 01 0f 87 55 fa ff ff 89 f0
RSP: 0018:ffff9f770274f948 EFLAGS: 00010046
RAX: 0000000000000003 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000150
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8895d1173300 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000150 R14: 0000000000000000 R15: 0000000000000000
FS: 00007fc9b2ba0740(0000) GS:ffff889cdfcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000150 CR3: 000000010fd93005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
lock_acquire+0xbf/0x2b0
? simple_recursive_removal+0xa5/0x2b0
? lock_release+0x13d/0x2d0
down_write+0x2a/0xd0
? simple_recursive_removal+0xa5/0x2b0
simple_recursive_removal+0xa5/0x2b0
? start_creating.part.0+0x110/0x110
? _raw_spin_unlock+0x29/0x40
debugfs_remove+0x40/0x60
intel_gvt_debugfs_remove_vgpu+0x15/0x30 [kvmgt]
intel_gvt_destroy_vgpu+0x60/0x100 [kvmgt]
intel_vgpu_release_dev+0xe/0x20 [kvmgt]
device_release+0x30/0x80
kobject_put+0x79/0x1b0
device_release_driver_internal+0x1b8/0x230
bus_remove_device+0xec/0x160
device_del+0x189/0x400
? up_write+0x9c/0x1b0
? mdev_device_remove_common+0x60/0x60 [mdev]
mdev_device_remove_common+0x22/0x60 [mdev]
mdev_device_remove_cb+0x17/0x20 [mdev]
device_for_each_child+0x56/0x80
mdev_unregister_parent+0x5a/0x81 [mdev]
intel_gvt_clean_device+0x2d/0xe0 [kvmgt]
intel_gvt_driver_remove+0x2e/0xb0 [i915]
i915_driver_remove+0xac/0x100 [i915]
i915_pci_remove+0x1a/0x30 [i915]
pci_device_remove+0x31/0xa0
device_release_driver_internal+0x1b8/0x230
unbind_store+0xd8/0x100
kernfs_fop_write_iter+0x156/0x210
vfs_write+0x236/0x4a0
ksys_write+0x61/0xd0
do_syscall_64+0x55/0x80
? find_held_lock+0x2b/0x80
? lock_release+0x13d/0x2d0
? up_read+0x17/0x20
? lock_is_held_type+0xe3/0x140
? asm_exc_page_fault+0x22/0x30
? lockdep_hardirqs_on+0x7d/0x100
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fc9b2c9e0c4
Code: 15 71 7d 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 3d 05 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48
RSP: 002b:00007ffec29c81c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc9b2c9e0c4
RDX: 000000000000000d RSI: 0000559f8b5f48a0 RDI: 0000000000000001
RBP: 0000559f8b5f48a0 R08: 0000559f8b5f3540 R09: 00007fc9b2d76d30
R10: 0000000000000000 R11: 0000000000000202 R12: 000000000000000d
R13: 00007fc9b2d77780 R14: 000000000000000d R15: 00007fc9b2d72a00
</TASK>
Modules linked in: sunrpc intel_rapl_msr intel_rapl_common intel_pmc_core_pltdrv intel_pmc_core intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ee1004 igbvf rapl vfat fat intel_cstate intel_uncore pktcdvd i2c_i801 pcspkr wmi_bmof i2c_smbus acpi_pad vfio_pci vfio_pci_core vfio_virqfd zram fuse dm_multipath kvmgt mdev vfio_iommu_type1 vfio kvm irqbypass i915 nvme e1000e igb nvme_core crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic serio_raw ghash_clmulni_intel sha512_ssse3 dca drm_buddy intel_gtt video wmi drm_display_helper ttm
CR2: 0000000000000150
---[ end trace 0000000000000000 ]---

Cc: Wang Zhi <zhi.a.wang@intel.com>
Cc: He Yu <yu.he@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Fixes: bc7b0be316ae ("drm/i915/gvt: Add basic debugfs infrastructure")
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20221219140357.769557-2-zhenyuw@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gvt: fix gvt debugfs destroy

commit c4b850d1f448a901fbf4f7f36dec38c84009b489 upstream.

When gvt debug fs is destroyed, need to have a sane check if drm
minor's debugfs root is still available or not, otherwise in case like
device remove through unbinding, drm minor's debugfs directory has
already been removed, then intel_gvt_debugfs_clean() would act upon
dangling pointer like below oops.

i915 0000:00:02.0: Direct firmware load for i915/gvt/vid_0x8086_did_0x1926_rid_0x0a.golden_hw_state failed with error -2
i915 0000:00:02.0: MDEV: Registered
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: MDEV: Unregistering
BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 2 PID: 2486 Comm: gfx-unbind.sh Tainted: G          I        6.1.0-rc8+ #15
Hardware name: Dell Inc. XPS 13 9350/0JXC1H, BIOS 1.13.0 02/10/2020
RIP: 0010:down_write+0x1f/0x90
Code: 1d ff ff 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 53 48 89 fb e8 62 c0 ff ff bf 01 00 00 00 e8 28 5e 31 ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 33 65 48 8b 04 25 c0 bd 01 00 48 89 43 08 bf 01
RSP: 0018:ffff9eb3036ffcc8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000000a0 RCX: ffffff8100000000
RDX: 0000000000000001 RSI: 0000000000000064 RDI: ffffffffa48787a8
RBP: ffff9eb3036ffd30 R08: ffffeb1fc45a0608 R09: ffffeb1fc45a05c0
R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000
R13: ffff91acc33fa328 R14: ffff91acc033f080 R15: ffff91acced533e0
FS:  00007f6947bba740(0000) GS:ffff91ae36d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 00000001133a2002 CR4: 00000000003706e0
Call Trace:
<TASK>
simple_recursive_removal+0x9f/0x2a0
? start_creating.part.0+0x120/0x120
? _raw_spin_lock+0x13/0x40
debugfs_remove+0x40/0x60
intel_gvt_debugfs_clean+0x15/0x30 [kvmgt]
intel_gvt_clean_device+0x49/0xe0 [kvmgt]
intel_gvt_driver_remove+0x2f/0xb0
i915_driver_remove+0xa4/0xf0
i915_pci_remove+0x1a/0x30
pci_device_remove+0x33/0xa0
device_release_driver_internal+0x1b2/0x230
unbind_store+0xe0/0x110
kernfs_fop_write_iter+0x11b/0x1f0
vfs_write+0x203/0x3d0
ksys_write+0x63/0xe0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f6947cb5190
Code: 40 00 48 8b 15 71 9c 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d 51 24 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89
RSP: 002b:00007ffcbac45a28 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f6947cb5190
RDX: 000000000000000d RSI: 0000555e35c866a0 RDI: 0000000000000001
RBP: 0000555e35c866a0 R08: 0000000000000002 R09: 0000555e358cb97c
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000001
R13: 000000000000000d R14: 0000000000000000 R15: 0000555e358cb8e0
</TASK>
Modules linked in: kvmgt
CR2: 00000000000000a0
---[ end trace 0000000000000000 ]---

Cc: Wang, Zhi <zhi.a.wang@intel.com>
Cc: He, Yu <yu.he@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Fixes: bc7b0be316ae ("drm/i915/gvt: Add basic debugfs infrastructure")
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20221219140357.769557-1-zhenyuw@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdkfd: Fix kernel warning during topology setup

commit cf97eb7e47d4671084c7e114c5d88a3d0540ecbd upstream.

This patch fixes the following kernel warning seen during
driver load by correctly initializing the p2plink attr before
creating the sysfs file:

[  +0.002865] ------------[ cut here ]------------
[  +0.002327] kobject: '(null)' (0000000056260cfb): is not initialized, yet kobject_put() is being called.
[  +0.004780] WARNING: CPU: 32 PID: 1006 at lib/kobject.c:718 kobject_put+0xaa/0x1c0
[  +0.001361] Call Trace:
[  +0.001234]  <TASK>
[  +0.001067]  kfd_remove_sysfs_node_entry+0x24a/0x2d0 [amdgpu]
[  +0.003147]  kfd_topology_update_sysfs+0x3d/0x750 [amdgpu]
[  +0.002890]  kfd_topology_add_device+0xbd7/0xc70 [amdgpu]
[  +0.002844]  ? lock_release+0x13c/0x2e0
[  +0.001936]  ? smu_cmn_send_smc_msg_with_param+0x1e8/0x2d0 [amdgpu]
[  +0.003313]  ? amdgpu_dpm_get_mclk+0x54/0x60 [amdgpu]
[  +0.002703]  kgd2kfd_device_init.cold+0x39f/0x4ed [amdgpu]
[  +0.002930]  amdgpu_amdkfd_device_init+0x13d/0x1f0 [amdgpu]
[  +0.002944]  amdgpu_device_init.cold+0x1464/0x17b4 [amdgpu]
[  +0.002970]  ? pci_bus_read_config_word+0x43/0x80
[  +0.002380]  amdgpu_driver_load_kms+0x15/0x100 [amdgpu]
[  +0.002744]  amdgpu_pci_probe+0x147/0x370 [amdgpu]
[  +0.002522]  local_pci_probe+0x40/0x80
[  +0.001896]  work_for_cpu_fn+0x10/0x20
[  +0.001892]  process_one_work+0x26e/0x5a0
[  +0.002029]  worker_thread+0x1fd/0x3e0
[  +0.001890]  ? process_one_work+0x5a0/0x5a0
[  +0.002115]  kthread+0xea/0x110
[  +0.001618]  ? kthread_complete_and_exit+0x20/0x20
[  +0.002422]  ret_from_fork+0x1f/0x30
[  +0.001808]  </TASK>
[  +0.001103] irq event stamp: 59837
[  +0.001718] hardirqs last  enabled at (59849): [<ffffffffb30fab12>] __up_console_sem+0x52/0x60
[  +0.004414] hardirqs last disabled at (59860): [<ffffffffb30faaf7>] __up_console_sem+0x37/0x60
[  +0.004414] softirqs last  enabled at (59654): [<ffffffffb307d9c7>] irq_exit_rcu+0xd7/0x130
[  +0.004205] softirqs last disabled at (59649): [<ffffffffb307d9c7>] irq_exit_rcu+0xd7/0x130
[  +0.004203] ---[ end trace 0000000000000000 ]---

Fixes: 0f28cca87e9a ("drm/amdkfd: Extend KFD device topology to surface peer-to-peer links")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/plane-helper: Add the missing declaration of drm_atomic_state

commit 4e699e34f923188175986ad8a74ab99f7034075e upstream.

Add the missing declaration of struct drm_atomic_state to fix the
compile error below:

error: 'struct drm_atomic_state' declared inside parameter
list will not be visible outside of this definition or declaration [-Werror]

Signed-off-by: Ma Jun <majun@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 8401bd361f59 ("drm/plane-helper: Add a drm_plane_helper_atomic_check() helper")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.1+
Link: https://patchwork.freedesktop.org/patch/msgid/20221216030526.1335609-1-majun@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of/fdt: run soc memory setup when early_init_dt_scan_memory fails

commit 2a12187d5853d9fd5102278cecef7dac7c8ce7ea upstream.

If memory has been found early_init_dt_scan_memory now returns 1. If
it hasn't found any memory it will return 0, allowing other memory
setup mechanisms to carry on.

Previously early_init_dt_scan_memory always returned 0 without
distinguishing between any kind of memory setup being done or not. Any
code path after the early_init_dt_scan memory call in the ramips
plat_mem_setup code wouldn't be executed anymore. Making
early_init_dt_scan_memory the only way to initialize the memory.

Some boards, including my mt7621 based Cudy X6 board, depend on memory
initialization being done via the soc_info.mem_detect function
pointer. Those wouldn't be able to obtain memory and panic the kernel
during early bootup with the message "early_init_dt_alloc_memory_arch:
Failed to allocate 12416 bytes align=0x40".

Fixes: 1f012283e936 ("of/fdt: Rework early_init_dt_scan_memory() to call directly")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Rammhold <andreas@rammhold.de>
Link: https://lore.kernel.org/r/20221223112748.2935235-1-andreas@rammhold.de
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv, kprobes: Stricter c.jr/c.jalr decoding

commit b2d473a6019ef9a54b0156ecdb2e0398c9fa6a24 upstream.

In the compressed instruction extension, c.jr, c.jalr, c.mv, and c.add
is encoded the following way (each instruction is 16b):

---+-+-----------+-----------+--
100 0 rs1[4:0]!=0       00000 10 : c.jr
100 1 rs1[4:0]!=0       00000 10 : c.jalr
100 0  rd[4:0]!=0 rs2[4:0]!=0 10 : c.mv
100 1  rd[4:0]!=0 rs2[4:0]!=0 10 : c.add

The following logic is used to decode c.jr and c.jalr:

  insn & 0xf007 == 0x8002 => instruction is an c.jr
  insn & 0xf007 == 0x9002 => instruction is an c.jalr

When 0xf007 is used to mask the instruction, c.mv can be incorrectly
decoded as c.jr, and c.add as c.jalr.

Correct the decoding by changing the mask from 0xf007 to 0xf07f.

Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230102160748.1307289-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: uaccess: fix type of 0 variable on error in get_user()

commit b9b916aee6715cd7f3318af6dc360c4729417b94 upstream.

If the get_user(x, ptr) has x as a pointer, then the setting
of (x) = 0 is going to produce the following sparse warning,
so fix this by forcing the type of 'x' when access_ok() fails.

fs/aio.c:2073:21: warning: Using plain integer as NULL pointer

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221229170545.718264-1-ben-linux@fluff.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: int340x: Add missing attribute for data rate base

commit b878d3ba9bb41cddb73ba4b56e5552f0a638daca upstream.

Commit 473be51142ad ("thermal: int340x: processor_thermal: Add RFIM
driver")' added rfi_restriction_data_rate_base string, mmio details and
documentation, but missed adding attribute to sysfs.

Add missing sysfs attribute.

Fixes: 473be51142ad ("thermal: int340x: processor_thermal: Add RFIM driver")
Cc: 5.11+ <stable@vger.kernel.org> # v5.11+
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost_vdpa: fix the crash in unmap a large memory

commit e794070af224ade46db368271896b2685ff4f96b upstream.

While testing in vIOMMU, sometimes Guest will unmap very large memory,
which will cause the crash. To fix this, add a new function
vhost_vdpa_general_unmap(). This function will only unmap the memory
that saved in iotlb.

Call Trace:
[  647.820144] ------------[ cut here ]------------
[  647.820848] kernel BUG at drivers/iommu/intel/iommu.c:1174!
[  647.821486] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[  647.822082] CPU: 10 PID: 1181 Comm: qemu-system-x86 Not tainted 6.0.0-rc1home_lulu_2452_lulu7_vhost+ #62
[  647.823139] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-29-g6a62e0cb0dfe-prebuilt.qem4
[  647.824365] RIP: 0010:domain_unmap+0x48/0x110
[  647.825424] Code: 48 89 fb 8d 4c f6 1e 39 c1 0f 4f c8 83 e9 0c 83 f9 3f 7f 18 48 89 e8 48 d3 e8 48 85 c0 75 59
[  647.828064] RSP: 0018:ffffae5340c0bbf0 EFLAGS: 00010202
[  647.828973] RAX: 0000000000000001 RBX: ffff921793d10540 RCX: 000000000000001b
[  647.830083] RDX: 00000000080000ff RSI: 0000000000000001 RDI: ffff921793d10540
[  647.831214] RBP: 0000000007fc0100 R08: ffffae5340c0bcd0 R09: 0000000000000003
[  647.832388] R10: 0000007fc0100000 R11: 0000000000100000 R12: 00000000080000ff
[  647.833668] R13: ffffae5340c0bcd0 R14: ffff921793d10590 R15: 0000008000100000
[  647.834782] FS:  00007f772ec90640(0000) GS:ffff921ce7a80000(0000) knlGS:0000000000000000
[  647.836004] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  647.836990] CR2: 00007f02c27a3a20 CR3: 0000000101b0c006 CR4: 0000000000372ee0
[  647.838107] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  647.839283] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  647.840666] Call Trace:
[  647.841437]  <TASK>
[  647.842107]  intel_iommu_unmap_pages+0x93/0x140
[  647.843112]  __iommu_unmap+0x91/0x1b0
[  647.844003]  iommu_unmap+0x6a/0x95
[  647.844885]  vhost_vdpa_unmap+0x1de/0x1f0 [vhost_vdpa]
[  647.845985]  vhost_vdpa_process_iotlb_msg+0xf0/0x90b [vhost_vdpa]
[  647.847235]  ? _raw_spin_unlock+0x15/0x30
[  647.848181]  ? _copy_from_iter+0x8c/0x580
[  647.849137]  vhost_chr_write_iter+0xb3/0x430 [vhost]
[  647.850126]  vfs_write+0x1e4/0x3a0
[  647.850897]  ksys_write+0x53/0xd0
[  647.851688]  do_syscall_64+0x3a/0x90
[  647.852508]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[  647.853457] RIP: 0033:0x7f7734ef9f4f
[  647.854408] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 76 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c8
[  647.857217] RSP: 002b:00007f772ec8f040 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
[  647.858486] RAX: ffffffffffffffda RBX: 00000000fef00000 RCX: 00007f7734ef9f4f
[  647.859713] RDX: 0000000000000048 RSI: 00007f772ec8f090 RDI: 0000000000000010
[  647.860942] RBP: 00007f772ec8f1a0 R08: 0000000000000000 R09: 0000000000000000
[  647.862206] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000010
[  647.863446] R13: 0000000000000002 R14: 0000000000000000 R15: ffffffff01100000
[  647.864692]  </TASK>
[  647.865458] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs v]
[  647.874688] ---[ end trace 0000000000000000 ]---

Cc: stable@vger.kernel.org
Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221219073331.556140-1-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: Allow system suspend to continue when TPM suspend fails

commit 1382999aa0548a171a272ca817f6c38e797c458c upstream.

TPM 1 is sometimes broken across system suspends, due to races or
locking issues or something else that haven't been diagnosed or fixed
yet, most likely having to do with concurrent reads from the TPM's
hardware random number generator driver. These issues prevent the system
from actually suspending, with errors like:

  tpm tpm0: A TPM error (28) occurred continue selftest
  ...
  tpm tpm0: A TPM error (28) occurred attempting get random
  ...
  tpm tpm0: Error (28) sending savestate before suspend
  tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28
  tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28
  tpm_tis 00:08: PM: failed to suspend: error 28
  PM: Some devices failed to suspend, or early wake event detected

This issue was partially fixed by 23393c646142 ("char: tpm: Protect
tpm_pm_suspend with locks"), in a last minute 6.1 commit that Linus took
directly because the TPM maintainers weren't available. However, it
seems like this just addresses the most common cases of the bug, rather
than addressing it entirely. So there are more things to fix still,
apparently.

In lieu of actually fixing the underlying bug, just allow system suspend
to continue, so that laptops still go to sleep fine. Later, this can be
reverted when the real bug is fixed.

Link: https://lore.kernel.org/lkml/7cbe96cf-e0b5-ba63-d1b4-f63d2e826efa@suse.cz/
Cc: stable@vger.kernel.org # 6.1+
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Luigi Semenzato <semenzato@chromium.org>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix CQ waiting timeout handling

commit 12521a5d5cb7ff0ad43eadfc9c135d86e1131fa8 upstream.

Jiffy to ktime CQ waiting conversion broke how we treat timeouts, in
particular we rearm it anew every time we get into
io_cqring_wait_schedule() without adjusting the timeout. Waiting for 2
CQEs and getting a task_work in the middle may double the timeout value,
or even worse in some cases task may wait indefinitely.

Cc: stable@vger.kernel.org
Fixes: 228339662b398 ("io_uring: don't convert to jiffies for waiting on timeouts")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f7bffddd71b08f28a877d44d37ac953ddb01590d.1672915663.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: pin context while queueing deferred tw

commit 9ffa13ff78a0a55df968a72d6f0ebffccee5c9f4 upstream.

Unlike normal tw, nothing prevents deferred tw to be executed right
after an tw item added to ->work_llist in io_req_local_work_add(). For
instance, the waiting task may get waken up by CQ posting or a normal
tw. Thus we need to pin the ring for the rest of io_req_local_work_add()

Cc: stable@vger.kernel.org
Fixes: c0e0d6ba25f18 ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1a79362b9c10b8523ef70b061d96523650a23344.1672795998.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: don't allow splitting of a REQ_NOWAIT bio

commit 9cea62b2cbabff8ed46f2df17778b624ad9dd25a upstream.

If we split a bio marked with REQ_NOWAIT, then we can trigger spurious
EAGAIN if constituent parts of that split bio end up failing request
allocations. Parts will complete just fine, but just a single failure
in one of the chained bios will yield an EAGAIN final result for the
parent bio.

Return EAGAIN early if we end up needing to split such a bio, which
allows for saner recovery handling.

Cc: stable@vger.kernel.org # 5.15+
Link: https://github.com/axboe/liburing/issues/766
Reported-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: tag_qca: fix wrong MGMT_DATA2 size

commit d9dba91be71f03cc75bcf39fc0d5d99ff33f1ae0 upstream.

It was discovered that MGMT_DATA2 can contain up to 28 bytes of data
instead of the 12 bytes written in the Documentation by accounting the
limit of 16 bytes declared in Documentation subtracting the first 4 byte
in the packet header.

Update the define with the real world value.

Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: c2ee8181fddb ("net: dsa: tag_qca: add define for handling mgmt Ethernet packet")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: qca8k: fix wrong length value for mgmt eth packet

commit 9807ae69746196ee4bbffe7d22d22ab2b61c6ed0 upstream.

The assumption that Documentation was right about how this value work was
wrong. It was discovered that the length value of the mgmt header is in
step of word size.

As an example to process 4 byte of data the correct length to set is 2.
To process 8 byte 4, 12 byte 6, 16 byte 8...

Odd values will always return the next size on the ack packet.
(length of 3 (6 byte) will always return 8 bytes of data)

This means that a value of 15 (0xf) actually means reading/writing 32 bytes
of data instead of 16 bytes. This behaviour is totally absent and not
documented in the switch Documentation.

In fact from Documentation the max value that mgmt eth can process is
16 byte of data while in reality it can process 32 bytes at once.

To handle this we always round up the length after deviding it for word
size. We check if the result is odd and we round another time to align
to what the switch will provide in the ack packet.
The workaround for the length limit of 15 is still needed as the length
reg max value is 0xf(15)

Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: 90386223f44e ("net: dsa: qca8k: add support for larger read/write size with mgmt Ethernet")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "net: dsa: qca8k: cache lo and hi for mdio write"

commit 03cb9e6d0b32b768e3d9d473c5c4ca1100877664 upstream.

This reverts commit 2481d206fae7884cd07014fd1318e63af35e99eb.

The Documentation is very confusing about the topic.
The cache logic for hi and lo is wrong and actually miss some regs to be
actually written.

What the Documentation actually intended was that it's possible to skip
writing hi OR lo if half of the reg is not needed to be written or read.

Revert the change in favor of a better and correct implementation.

Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/amd/display: Enable Freesync Video Mode by default"

commit 6fe6ece398f7431784847e922a2c8c385dc58a35 upstream.

This reverts commit de05abe6b9d0fe08f65d744f7f75a4cba4df27ad.

The bug referenced below was bisected to this commit. There has been no
activity toward fixing it in 3 months, so let's revert for now.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2162
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix panic due to wrong pageattr of im->image

commit 9ed1d9aeef5842ecacb660fce933613b58af1e00 upstream.

In the scenario where livepatch and kretfunc coexist, the pageattr of
im->image is rox after arch_prepare_bpf_trampoline in
bpf_trampoline_update, and then modify_fentry or register_fentry returns
-EAGAIN from bpf_tramp_ftrace_ops_func, the BPF_TRAMP_F_ORIG_STACK flag
will be configured, and arch_prepare_bpf_trampoline will be re-executed.

At this time, because the pageattr of im->image is rox,
arch_prepare_bpf_trampoline will read and write im->image, which causes
a fault. as follows:

  insmod livepatch-sample.ko    # samples/livepatch/livepatch-sample.c
  bpftrace -e 'kretfunc:cmdline_proc_show {}'

BUG: unable to handle page fault for address: ffffffffa0206000
PGD 322d067 P4D 322d067 PUD 322e063 PMD 1297e067 PTE d428061
Oops: 0003 [#1] PREEMPT SMP PTI
CPU: 2 PID: 270 Comm: bpftrace Tainted: G            E K    6.1.0 #5
RIP: 0010:arch_prepare_bpf_trampoline+0xed/0x8c0
RSP: 0018:ffffc90001083ad8 EFLAGS: 00010202
RAX: ffffffffa0206000 RBX: 0000000000000020 RCX: 0000000000000000
RDX: ffffffffa0206001 RSI: ffffffffa0206000 RDI: 0000000000000030
RBP: ffffc90001083b70 R08: 0000000000000066 R09: ffff88800f51b400
R10: 000000002e72c6e5 R11: 00000000d0a15080 R12: ffff8880110a68c8
R13: 0000000000000000 R14: ffff88800f51b400 R15: ffffffff814fec10
FS:  00007f87bc0dc780(0000) GS:ffff88803e600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa0206000 CR3: 0000000010b70000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
bpf_trampoline_update+0x25a/0x6b0
__bpf_trampoline_link_prog+0x101/0x240
bpf_trampoline_link_prog+0x2d/0x50
bpf_tracing_prog_attach+0x24c/0x530
bpf_raw_tp_link_attach+0x73/0x1d0
__sys_bpf+0x100e/0x2570
__x64_sys_bpf+0x1c/0x30
do_syscall_64+0x5b/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

With this patch, when modify_fentry or register_fentry returns -EAGAIN
from bpf_tramp_ftrace_ops_func, the pageattr of im->image will be reset
to nx+rw.

Cc: stable@vger.kernel.org
Fixes: 00963a2e75a8 ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221224133146.780578-1-nashuiliang@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: matroxfb: G200eW: Increase max memory from 1 MB to 16 MB

commit f685dd7a8025f2554f73748cfdb8143a21fb92c7 upstream.

Commit 62d89a7d49af ("video: fbdev: matroxfb: set maxvram of vbG200eW to
the same as vbG200 to avoid black screen") accidently decreases the
maximum memory size for the Matrox G200eW (102b:0532) from 8 MB to 1 MB
by missing one zero. This caused the driver initialization to fail with
the messages below, as the minimum required VRAM size is 2 MB:

     [    9.436420] matroxfb: Matrox MGA-G200eW (PCI) detected
     [    9.444502] matroxfb: cannot determine memory size
     [    9.449316] matroxfb: probe of 0000:0a:03.0 failed with error -1

So, add the missing 0 to make it the intended 16 MB. Successfully tested on
the Dell PowerEdge R910/0KYD3D, BIOS 2.10.0 08/29/2013, that the warning is
gone.

While at it, add a leading 0 to the maxdisplayable entry, so it’s aligned
properly. The value could probably also be increased from 8 MB to 16 MB, as
the G200 uses the same values, but I have not checked any datasheet.

Note, matroxfb is obsolete and superseded by the maintained DRM driver
mga200, which is used by default on most systems where both drivers are
available. Therefore, on most systems it was only a cosmetic issue.

Fixes: 62d89a7d49af ("video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen")
Link: https://lore.kernel.org/linux-fbdev/972999d3-b75d-5680-fcef-6e6905c52ac5@suse.de/T/#mb6953a9995ebd18acc8552f99d6db39787aec775
Cc: it+linux-fbdev@molgen.mpg.de
Cc: Z. Liu <liuzx@knownsec.com>
Cc: Rich Felker <dalias@libc.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: fix handling of readdir in v4root vs. mount upcall timeout

commit cad853374d85fe678d721512cecfabd7636e51f3 upstream.

If v4 READDIR operation hits a mountpoint and gets back an error,
then it will include that entry in the reply and set RDATTR_ERROR for it
to the error.

That's fine for "normal" exported filesystems, but on the v4root, we
need to be more careful to only expose the existence of dentries that
lead to exports.

If the mountd upcall times out while checking to see whether a
mountpoint on the v4root is exported, then we have no recourse other
than to fail the whole operation.

Cc: Steve Dickson <steved@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216777
Reported-by: JianHong Yin <yin-jianhong@163.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/bugs: Flush IBP in ib_prctl_set()

commit a664ec9158eeddd75121d39c9a0758016097fa96 upstream.

We missed the window between the TIF flag update and the next reschedule.

Signed-off-by: Rodrigo Branco <bsdaemon@google.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kexec: Fix double-free of elf header buffer

commit d00dd2f2645dca04cf399d8fc692f3f69b6dd996 upstream.

After

b3e34a47f989 ("x86/kexec: fix memory leak of elf header buffer"),

freeing image->elf_headers in the error path of crash_load_segments()
is not needed because kimage_file_post_load_cleanup() will take
care of that later. And not clearing it could result in a double-free.

Drop the superfluous vfree() call at the error path of
crash_load_segments().

Fixes: b3e34a47f989 ("x86/kexec: fix memory leak of elf header buffer")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221122115122.13937-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: Intel: pci-tgl: unblock S5 entry if DMA stop has failed"

[ Upstream commit 2aa2a5ead0ee0a358bf80a2984a641d1bf2adc2a ]

If system shutdown has not been completed cleanly, it is possible the
DMA stream shutdown has not been done, or was not clean.

If this is the case, Intel TGL/ADL HDA platforms may fail to shutdown
cleanly due to pending HDA DMA transactions. To avoid this, detect this
scenario in the shutdown callback, and perform an additional controller
reset. This has been tested to unblock S5 entry if this condition is
hit.

Co-developed-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221209114529.3909192-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: also return I/O command effects from nvme_command_effects

[ Upstream commit 831ed60c2aca2d7c517b2da22897a90224a97d27 ]

To be able to use the Commands Supported and Effects Log for allowing
unprivileged passtrough, it needs to be corretly reported for I/O
commands as well. Return the I/O command effects from
nvme_command_effects, and also add a default list of effects for the
NVM command set. For other command sets, the Commands Supported and
Effects log is required to be present already.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it

[ Upstream commit 61f37154c599cf9f2f84dcbd9be842f8645a7099 ]

Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a
single value to multiple array entries instead of repeated assignments.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: alloc_string_stream_fragment error handling bug fix

[ Upstream commit 93ef83050e597634d2c7dc838a28caf5137b9404 ]

When it fails to allocate fragment, it does not free and return error.
And check the pointer inappropriately.

Fixed merge conflicts with
commit 618887768bb7 ("kunit: update NULL vs IS_ERR() tests")
Shuah Khan <skhan@linuxfoundation.org>

Signed-off-by: YoungJun.park <her0gyugyu@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: check for valid register opcode earlier

[ Upstream commit 343190841a1f22b96996d9f8cfab902a4d1bfd0e ]

We only check the register opcode value inside the restricted ring
section, move it into the main io_uring_register() function instead
and check it up front.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Don't enable fallback path for creating ACPI backlight by default

[ Upstream commit 5aa9d943e9b6bf6e6023645cbe7ce7d5ed84baf4 ]

The ACPI video detection code has a module parameter
`register_backlight_delay` which is currently configured to 8 seconds.
This means that if after 8 seconds of booting no native driver has created
a backlight device then the code will attempt to make an ACPI video
backlight device.

This was intended as a safety mechanism with the backlight overhaul that
occurred in kernel 6.1, but as it doesn't appear necesssary set it to be
disabled by default.

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Report to ACPI video if no panels were found

[ Upstream commit c573e240609ff781a0246c0c8c8351abd0475287 ]

On desktop APUs amdgpu doesn't create a native backlight device
as no eDP panels are found. However if the BIOS has reported
backlight control methods in the ACPI tables then an acpi_video0
backlight device will be made 8 seconds after boot.

This has manifested in a power slider on a number of desktop APUs
ranging from Ryzen 5000 through Ryzen 7000 on various motherboard
manufacturers. To avoid this, report to the acpi video detection
that the system does not have any panel connected in the native
driver.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783786
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Allow GPU drivers to report no panels

[ Upstream commit 00a734104af7d878f1252d49eff9298785c6cbdc ]

The current logic for the ACPI backlight detection will create
a backlight device if no native or vendor drivers have created
8 seconds after the system has booted if the ACPI tables
included backlight control methods.

If the GPU drivers have loaded, they may be able to report whether
any LCD panels were found. Allow using this information to factor
in whether to enable the fallback logic for making an acpi_video0
backlight device.

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: fix multipath crash caused by flush request when blktrace is enabled

[ Upstream commit 3659fb5ac29a5e6102bebe494ac789fd47fb78f4 ]

The flush request initialized by blk_kick_flush has NULL bio,
and it may be dealt with nvme_end_req during io completion.
When blktrace is enabled, nvme_trace_bio_complete with multipath
activated trying to access NULL pointer bio from flush request
results in the following crash:

[ 2517.831677] BUG: kernel NULL pointer dereference, address: 000000000000001a
[ 2517.835213] #PF: supervisor read access in kernel mode
[ 2517.838724] #PF: error_code(0x0000) - not-present page
[ 2517.842222] PGD 7b2d51067 P4D 0
[ 2517.845684] Oops: 0000 [#1] SMP NOPTI
[ 2517.849125] CPU: 2 PID: 732 Comm: kworker/2:1H Kdump: loaded Tainted: G S                5.15.67-0.cl9.x86_64 #1
[ 2517.852723] Hardware name: XFUSION 2288H V6/BC13MBSBC, BIOS 1.13 07/27/2022
[ 2517.856358] Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp]
[ 2517.859993] RIP: 0010:blk_add_trace_bio_complete+0x6/0x30
[ 2517.863628] Code: 1f 44 00 00 48 8b 46 08 31 c9 ba 04 00 10 00 48 8b 80 50 03 00 00 48 8b 78 50 e9 e5 fe ff ff 0f 1f 44 00 00 41 54 49 89 f4 55 <0f> b6 7a 1a 48 89 d5 e8 3e 1c 2b 00 48 89 ee 4c 89 e7 5d 89 c1 ba
[ 2517.871269] RSP: 0018:ff7f6a008d9dbcd0 EFLAGS: 00010286
[ 2517.875081] RAX: ff3d5b4be00b1d50 RBX: 0000000002040002 RCX: ff3d5b0a270f2000
[ 2517.878966] RDX: 0000000000000000 RSI: ff3d5b0b021fb9f8 RDI: 0000000000000000
[ 2517.882849] RBP: ff3d5b0b96a6fa00 R08: 0000000000000001 R09: 0000000000000000
[ 2517.886718] R10: 000000000000000c R11: 000000000000000c R12: ff3d5b0b021fb9f8
[ 2517.890575] R13: 0000000002000000 R14: ff3d5b0b021fb1b0 R15: 0000000000000018
[ 2517.894434] FS:  0000000000000000(0000) GS:ff3d5b42bfc80000(0000) knlGS:0000000000000000
[ 2517.898299] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2517.902157] CR2: 000000000000001a CR3: 00000004f023e005 CR4: 0000000000771ee0
[ 2517.906053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2517.909930] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2517.913761] PKRU: 55555554
[ 2517.917558] Call Trace:
[ 2517.921294]  <TASK>
[ 2517.924982]  nvme_complete_rq+0x1c3/0x1e0 [nvme_core]
[ 2517.928715]  nvme_tcp_recv_pdu+0x4d7/0x540 [nvme_tcp]
[ 2517.932442]  nvme_tcp_recv_skb+0x4f/0x240 [nvme_tcp]
[ 2517.936137]  ? nvme_tcp_recv_pdu+0x540/0x540 [nvme_tcp]
[ 2517.939830]  tcp_read_sock+0x9c/0x260
[ 2517.943486]  nvme_tcp_try_recv+0x65/0xa0 [nvme_tcp]
[ 2517.947173]  nvme_tcp_io_work+0x64/0x90 [nvme_tcp]
[ 2517.950834]  process_one_work+0x1e8/0x390
[ 2517.954473]  worker_thread+0x53/0x3c0
[ 2517.958069]  ? process_one_work+0x390/0x390
[ 2517.961655]  kthread+0x10c/0x130
[ 2517.965211]  ? set_kthread_struct+0x40/0x40
[ 2517.968760]  ret_from_fork+0x1f/0x30
[ 2517.972285]  </TASK>

To avoid this situation, add a NULL check for req->bio before
calling trace_block_bio_complete.

Signed-off-by: Yanjun Zhang <zhangyanjun@cestc.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring/cancel: re-grab ctx mutex after finishing wait

[ Upstream commit 23fffb2f09ce1145cbd751801d45ba74acaa6542 ]

If we have a signal pending during cancelations, it'll cause the
task_work run to return an error. Since we didn't run task_work, the
current task is left in TASK_INTERRUPTIBLE state when we need to
re-grab the ctx mutex, and the kernel will rightfully complain about
that.

Move the lock grabbing for the error cases outside the loop to avoid
that issue.

Reported-by: syzbot+7df055631cd1be4586fd@syzkaller.appspotmail.com
Link: https://lore.kernel.org/io-uring/0000000000003a14a905f05050b0@google.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix double release compute pasid

[ Upstream commit 1a799c4c190ea9f0e81028e3eb3037ed0ab17ff5 ]

If kfd_process_device_init_vm returns failure after vm is converted to
compute vm and vm->pasid set to compute pasid, KFD will not take
pdd->drm_file reference. As a result, drm close file handler maybe
called to release the compute pasid before KFD process destroy worker to
release the same pasid and set vm->pasid to zero, this generates below
WARNING backtrace and NULL pointer access.

Add helper amdgpu_amdkfd_gpuvm_set_vm_pasid and call it at the last step
of kfd_process_device_init_vm, to ensure vm pasid is the original pasid
if acquiring vm failed or is the compute pasid with pdd->drm_file
reference taken to avoid double release same pasid.

amdgpu: Failed to create process VM object
ida_free called for id=32770 which is not allocated.
WARNING: CPU: 57 PID: 72542 at ../lib/idr.c:522 ida_free+0x96/0x140
RIP: 0010:ida_free+0x96/0x140
Call Trace:
  amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu]
  amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu]
  drm_file_free.part.13+0x216/0x270 [drm]
  drm_close_helper.isra.14+0x60/0x70 [drm]
  drm_release+0x6e/0xf0 [drm]
  __fput+0xcc/0x280
  ____fput+0xe/0x20
  task_work_run+0x96/0xc0
  do_exit+0x3d0/0xc10

BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:ida_free+0x76/0x140
Call Trace:
  amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu]
  amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu]
  drm_file_free.part.13+0x216/0x270 [drm]
  drm_close_helper.isra.14+0x60/0x70 [drm]
  drm_release+0x6e/0xf0 [drm]
  __fput+0xcc/0x280
  ____fput+0xe/0x20
  task_work_run+0x96/0xc0
  do_exit+0x3d0/0xc10

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix kfd_process_device_init_vm error handling

[ Upstream commit 29d48b87db64b6697ddad007548e51d032081c59 ]

Should only destroy the ib_mem and let process cleanup worker to free
the outstanding BOs. Reset the pointer in pdd->qpd structure, to avoid
NULL pointer access in process destroy worker.

BUG: kernel NULL pointer dereference, address: 0000000000000010
Call Trace:
  amdgpu_amdkfd_gpuvm_unmap_gtt_bo_from_kernel+0x46/0xb0 [amdgpu]
  kfd_process_device_destroy_cwsr_dgpu+0x40/0x70 [amdgpu]
  kfd_process_destroy_pdds+0x71/0x190 [amdgpu]
  kfd_process_wq_release+0x2a2/0x3b0 [amdgpu]
  process_one_work+0x2a1/0x600
  worker_thread+0x39/0x3d0

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix size validation for non-exclusive domains (v4)

[ Upstream commit 7554886daa31eacc8e7fac9e15bbce67d10b8f1f ]

Fix amdgpu_bo_validate_size() to check whether the TTM domain manager for the
requested memory exists, else we get a kernel oops when dereferencing "man".

v2: Make the patch standalone, i.e. not dependent on local patches.
v3: Preserve old behaviour and just check that the manager pointer is not
NULL.
v4: Complain if GTT domain requested and it is uninitialized--most likely a
bug.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: mediatek: initialize panic_info to zero

[ Upstream commit 7bd220f2ba9014b78f0304178103393554b8c4fe ]

Coverity spotted that panic_info is not initialized to zero in
mtk_adsp_dump. Using uninitialized value panic_info.linenum when
calling snd_sof_get_status. Fix this coverity by initializing
panic_info struct as zero.

Signed-off-by: YC Hung <yc.hung@mediatek.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20221213115617.25086-1-yc.hung@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071 tablet

[ Upstream commit a1dec9d70b6ad97087b60b81d2492134a84208c6 ]

The Advantech MICA-071 tablet deviates from the defaults for
a non CR Bay Trail based tablet in several ways:

1. It uses an analog MIC on IN3 rather then using DMIC1
2. It only has 1 speaker
3. It needs the OVCD current threshold to be set to 1500uA instead of
the default 2000uA to reliable differentiate between headphones vs
headsets

Add a quirk with these settings for this tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221213123246.11226-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p/client: fix data race on req->status

[ Upstream commit 1a4f69ef15ec29b213e2b086b2502644e8ef76ee ]

KCSAN reported a race between writing req->status in p9_client_cb and
accessing it in p9_client_rpc's wait_event.

Accesses to req itself is protected by the data barrier (writing req
fields, write barrier, writing status // reading status, read barrier,
reading other req fields), but status accesses themselves apparently
also must be annotated properly with WRITE_ONCE/READ_ONCE when we
access it without locks.

Follows:
- error paths writing status in various threads all can notify
p9_client_rpc, so these all also need WRITE_ONCE
- there's a similar read loop in trans_virtio for zc case that also
needs READ_ONCE
- other reads in trans_fd should be protected by the trans_fd lock and
lists state machine, as corresponding writers all are within trans_fd
and should be under the same lock. If KCSAN complains on them we likely
will have something else to fix as well, so it's better to leave them
unmarked and look again if required.

Link: https://lkml.kernel.org/r/20221205124756.426350-1-asmadeus@codewreck.org
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Revert: "core: unregister clients and machine drivers in .shutdown"

[ Upstream commit 44fda61d2bcfb74a942df93959e083a4e8eff75f ]

The unregister machine drivers call is not safe to do when
kexec is used. Kexec-lite gets blocked with following backtrace:

[   84.943749] Freezing user space processes ... (elapsed 0.111 seconds) done.
[  246.784446] INFO: task kexec-lite:5123 blocked for more than 122 seconds.
[  246.819035] Call Trace:
[  246.821782]  <TASK>
[  246.824186]  __schedule+0x5f9/0x1263
[  246.828231]  schedule+0x87/0xc5
[  246.831779]  snd_card_disconnect_sync+0xb5/0x127
...
[  246.889249]  snd_sof_device_shutdown+0xb4/0x150
[  246.899317]  pci_device_shutdown+0x37/0x61
[  246.903990]  device_shutdown+0x14c/0x1d6
[  246.908391]  kernel_kexec+0x45/0xb9

This reverts commit 83bfc7e793b555291785136c3ae86abcdc046887.

Reported-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221209114529.3909192-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfs/hfsplus: avoid WARN_ON() for sanity check, use proper error handling

[ Upstream commit cb7a95af78d29442b8294683eca4897544b8ef46 ]

Commit 55d1cbbbb29e ("hfs/hfsplus: use WARN_ON for sanity check") fixed
a build warning by turning a comment into a WARN_ON(), but it turns out
that syzbot then complains because it can trigger said warning with a
corrupted hfs image.

The warning actually does warn about a bad situation, but we are much
better off just handling it as the error it is. So rather than warn
about us doing bad things, stop doing the bad things and return -EIO.

While at it, also fix a memory leak that was introduced by an earlier
fix for a similar syzbot warning situation, and add a check for one case
that historically wasn't handled at all (ie neither comment nor
subsequent WARN_ON).

Reported-by: syzbot+7bb7cd3595533513a9e7@syzkaller.appspotmail.com
Fixes: 55d1cbbbb29e ("hfs/hfsplus: use WARN_ON for sanity check")
Fixes: 8d824e69d9f3 ("hfs: fix OOB Read in __hfs_brec_find")
Link: https://lore.kernel.org/lkml/000000000000dbce4e05f170f289@google.com/
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: xilinx: include linux/gpio/consumer.h

[ Upstream commit e498a04443240c15c3c857165f7b652b87f4fd96 ]

The newly added gpio consumer calls cause a build failure in configurations
that fail to include the right header implicitly:

drivers/usb/dwc3/dwc3-xilinx.c: In function 'dwc3_xlnx_init_zynqmp':
drivers/usb/dwc3/dwc3-xilinx.c:207:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_clk_get_optional'? [-Werror=implicit-function-declaration]
  207 |         reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
      |                      ^~~~~~~~~~~~~~~~~~~~~~~
      |                      devm_clk_get_optional

Fixes: ca05b38252d7 ("usb: dwc3: xilinx: Add gpio-reset support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230103121755.956027-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udf: Fix extension of the last extent in the file

[ Upstream commit 83c7423d1eb6806d13c521d1002cc1a012111719 ]

When extending the last extent in the file within the last block, we
wrongly computed the length of the last extent. This is mostly a
cosmetical problem since the extent does not contain any data and the
length will be fixed up by following operations but still.

Fixes: 1f3868f06855 ("udf: Fix extending file within last block")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

caif: fix memory leak in cfctrl_linkup_request()

[ Upstream commit fe69230f05897b3de758427b574fc98025dfc907 ]

When linktype is unknown or kzalloc failed in cfctrl_linkup_request(),
pkt is not released. Add release process to error path.

Fixes: b482cd2053e3 ("net-caif: add CAIF core protocol stack")
Fixes: 8d545c8f958f ("caif: Disconnect without waiting for response")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230104065146.1153009-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/ulp: prevent ULP without clone op from entering the LISTEN status

[ Upstream commit 2c02d41d71f90a5168391b6a5f2954112ba2307c ]

When an ULP-enabled socket enters the LISTEN status, the listener ULP data
pointer is copied inside the child/accepted sockets by sk_clone_lock().

The relevant ULP can take care of de-duplicating the context pointer via
the clone() operation, but only MPTCP and SMC implement such op.

Other ULPs may end-up with a double-free at socket disposal time.

We can't simply clear the ULP data at clone time, as TLS replaces the
socket ops with custom ones assuming a valid TLS ULP context is
available.

Instead completely prevent clone-less ULP sockets from entering the
LISTEN status.

Fixes: 734942cc4ea6 ("tcp: ULP infrastructure")
Reported-by: slipper <slipper.alive@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4b80c3d1dbe3d0ab072f80450c202d9bc88b4b03.1672740602.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: allow sleep in qed_mcp_trace_dump()

[ Upstream commit 5401c3e0992860b11fb4b25796e4c4f1921740df ]

By default, qed_mcp_cmd_and_union() delays 10us at a time in a loop
that can run 500K times, so calls to qed_mcp_nvm_rd_cmd()
may block the current thread for over 5s.
We observed thread scheduling delays over 700ms in production,
with stacktraces pointing to this code as the culprit.

qed_mcp_trace_dump() is called from ethtool, so sleeping is permitted.
It already can sleep in qed_mcp_halt(), which calls qed_mcp_cmd().
Add a "can sleep" parameter to qed_find_nvram_image() and
qed_nvram_read() so they can sleep during qed_mcp_trace_dump().
qed_mcp_trace_get_meta_info() and qed_mcp_trace_read_meta(),
called only by qed_mcp_trace_dump(), allow these functions to sleep.
I can't tell if the other caller (qed_grc_dump_mcp_hw_dump()) can sleep,
so keep b_can_sleep set to false when it calls these functions.

An example stacktrace from a custom warning we added to the kernel
showing a thread that has not scheduled despite long needing resched:
[ 2745.362925,17] ------------[ cut here ]------------
[ 2745.362941,17] WARNING: CPU: 23 PID: 5640 at arch/x86/kernel/irq.c:233 do_IRQ+0x15e/0x1a0()
[ 2745.362946,17] Thread not rescheduled for 744 ms after irq 99
[ 2745.362956,17] Modules linked in: ...
[ 2745.363339,17] CPU: 23 PID: 5640 Comm: lldpd Tainted: P           O    4.4.182+ #202104120910+6d1da174272d.61x
[ 2745.363343,17] Hardware name: FOXCONN MercuryB/Quicksilver Controller, BIOS H11P1N09 07/08/2020
[ 2745.363346,17]  0000000000000000 ffff885ec07c3ed8 ffffffff8131eb2f ffff885ec07c3f20
[ 2745.363358,17]  ffffffff81d14f64 ffff885ec07c3f10 ffffffff81072ac2 ffff88be98ed0000
[ 2745.363369,17]  0000000000000063 0000000000000174 0000000000000074 0000000000000000
[ 2745.363379,17] Call Trace:
[ 2745.363382,17]  <IRQ>  [<ffffffff8131eb2f>] dump_stack+0x8e/0xcf
[ 2745.363393,17]  [<ffffffff81072ac2>] warn_slowpath_common+0x82/0xc0
[ 2745.363398,17]  [<ffffffff81072b4c>] warn_slowpath_fmt+0x4c/0x50
[ 2745.363404,17]  [<ffffffff810d5a8e>] ? rcu_irq_exit+0xae/0xc0
[ 2745.363408,17]  [<ffffffff817c99fe>] do_IRQ+0x15e/0x1a0
[ 2745.363413,17]  [<ffffffff817c7ac9>] common_interrupt+0x89/0x89
[ 2745.363416,17]  <EOI>  [<ffffffff8132aa74>] ? delay_tsc+0x24/0x50
[ 2745.363425,17]  [<ffffffff8132aa04>] __udelay+0x34/0x40
[ 2745.363457,17]  [<ffffffffa04d45ff>] qed_mcp_cmd_and_union+0x36f/0x7d0 [qed]
[ 2745.363473,17]  [<ffffffffa04d5ced>] qed_mcp_nvm_rd_cmd+0x4d/0x90 [qed]
[ 2745.363490,17]  [<ffffffffa04e1dc7>] qed_mcp_trace_dump+0x4a7/0x630 [qed]
[ 2745.363504,17]  [<ffffffffa04e2556>] ? qed_fw_asserts_dump+0x1d6/0x1f0 [qed]
[ 2745.363520,17]  [<ffffffffa04e4ea7>] qed_dbg_mcp_trace_get_dump_buf_size+0x37/0x80 [qed]
[ 2745.363536,17]  [<ffffffffa04ea881>] qed_dbg_feature_size+0x61/0xa0 [qed]
[ 2745.363551,17]  [<ffffffffa04eb427>] qed_dbg_all_data_size+0x247/0x260 [qed]
[ 2745.363560,17]  [<ffffffffa0482c10>] qede_get_regs_len+0x30/0x40 [qede]
[ 2745.363566,17]  [<ffffffff816c9783>] ethtool_get_drvinfo+0xe3/0x190
[ 2745.363570,17]  [<ffffffff816cc152>] dev_ethtool+0x1362/0x2140
[ 2745.363575,17]  [<ffffffff8109bcc6>] ? finish_task_switch+0x76/0x260
[ 2745.363580,17]  [<ffffffff817c2116>] ? __schedule+0x3c6/0x9d0
[ 2745.363585,17]  [<ffffffff810dbd50>] ? hrtimer_start_range_ns+0x1d0/0x370
[ 2745.363589,17]  [<ffffffff816c1e5b>] ? dev_get_by_name_rcu+0x6b/0x90
[ 2745.363594,17]  [<ffffffff816de6a8>] dev_ioctl+0xe8/0x710
[ 2745.363599,17]  [<ffffffff816a58a8>] sock_do_ioctl+0x48/0x60
[ 2745.363603,17]  [<ffffffff816a5d87>] sock_ioctl+0x1c7/0x280
[ 2745.363608,17]  [<ffffffff8111f393>] ? seccomp_phase1+0x83/0x220
[ 2745.363612,17]  [<ffffffff811e3503>] do_vfs_ioctl+0x2b3/0x4e0
[ 2745.363616,17]  [<ffffffff811e3771>] SyS_ioctl+0x41/0x70
[ 2745.363619,17]  [<ffffffff817c6ffe>] entry_SYSCALL_64_fastpath+0x1e/0x79
[ 2745.363622,17] ---[ end trace f6954aa440266421 ]---

Fixes: c965db4446291 ("qed: Add support for debug data collection")
Signed-off-by: Caleb Sander <csander@purestorage.com>
Acked-by: Alok Prasad <palok@marvell.com>
Link: https://lore.kernel.org/r/20230103233021.1457646-1-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ublk: honor IO_URING_F_NONBLOCK for handling control command

[ Upstream commit fa8e442e832a3647cdd90f3e606c473a51bc1b26 ]

Most of control command handlers may sleep, so return -EAGAIN in case
of IO_URING_F_NONBLOCK to defer the handling into io wq context.

Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230104133235.836536-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/gvt: fix double free bug in split_2MB_gtt_entry

[ Upstream commit 4a61648af68f5ba4884f0e3b494ee1cabc4b6620 ]

If intel_gvt_dma_map_guest_page failed, it will call
ppgtt_invalidate_spt, which will finally free the spt.
But the caller function ppgtt_populate_spt_by_guest_entry
does not notice that, it will free spt again in its error
path.

Fix this by canceling the mapping of DMA address and freeing sub_spt.
Besides, leave the handle of spt destroy to caller function instead
of callee function when error occurs.

Fixes: b901b252b6cf ("drm/i915/gvt: Add 2M huge gtt support")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20221229165641.1192455-1-zyytlz.wz@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>