Shunzhou Jiang [Fri, 1 Feb 2019 01:45:46 +0000 (09:45 +0800)]
clk: g12a/g12b: update pcie clk parameter for jitter [1/1]
PD#SWPL-4745
Problem:
update pcie parameter for jitter
Solution:
clear pcie clk parameter
Verify:
test pass on g12a skt/w400
Change-Id: I354d643c412c37fb6c99fc49ac5bd70ab12be008
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Brian Zhu [Thu, 28 Feb 2019 19:16:45 +0000 (03:16 +0800)]
vpp: sr: correct the sr core0 enable switch operation [1/1]
PD#SWPL-5113
Problem:
SR core0 enable switch register is latched as default. It
will cause the screen flicker when operating this bit in vsync.
Because the frame size will be out of sync with back-end module.
Solution:
1. For g12a, no latch ctrl. So did not disable sr core2 enable bit.
2. For g12b/tl1, disable the latch function.
Verify:
Verified on U212/w400/x301
Change-Id: I54027b71ef8a6066004b3bd32ed1633b4bfa351c
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Shunzhou Jiang [Fri, 22 Feb 2019 09:18:36 +0000 (17:18 +0800)]
clk: g12a/g12b: fix syspll overflow when freq larger than 2.1g [1/1]
PD#SWPL-5076
Problem:
syspll overflow
Solution:
div 1000 when round rate
Verify:
test pass on g12a skt/w400
Change-Id: I021a1e8fd1280b27e21e5b4c8983b91fb89e84ba
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Hanjie Lin [Tue, 26 Feb 2019 06:57:44 +0000 (14:57 +0800)]
dts: g12b: modify sched-energy dts for w400 revision-b [1/1]
PD#SWPL-5020
Problem:
modify sched-energy dts for w400 revision-b
Solution:
modify dts
Verify:
local.
Change-Id: I6686abc10bf07ec0e601eb9a72b7657ca3e1d991
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
pan.yang [Mon, 4 Mar 2019 07:29:15 +0000 (02:29 -0500)]
dts: add new frequency for A53 core at all g12b RevB dts [1/1]
PD#SWPL-5020
Problem:
need 1.9G for A53 core in g12b RevB.
Solution:
add 1.9G frequency for A53 core in RevB dts.
Verify:
local test.
Change-Id: Ic4085c05b3b9d18f759720e3d268d5e4629faba7
Signed-off-by: pan.yang <pan.yang@amlogic.com>
Jianxiong Pan [Mon, 25 Feb 2019 08:41:15 +0000 (16:41 +0800)]
dts: fix amlogic-dt-id error in g12b dts. [1/1]
PD#SWPL-5020
Problem:
amlogic-dt-id error in g12b dts.
Solution:
specify amlogic-dt-id by dts name.
Verify:
local test.
Change-Id: I11a737ec61221c2dc9fcd4e3761c380ac5b5044b
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Jianxiong Pan [Tue, 19 Feb 2019 05:01:57 +0000 (13:01 +0800)]
dts: g12b: copy g12b dts [1/1]
PD#SWPL-5020
Problem:
copy g12b dts.
Solution:
copy.
Verify:
local.
Change-Id: Ibd6423bd0cc99e98bf1d6359068f9f0719ad177f
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/g12b_a311x_w411_buildroot.dts
MingLiang Dong [Wed, 27 Feb 2019 07:05:40 +0000 (02:05 -0500)]
hdr: used line_n_int to trigger osd rdma [2/2]
PD#SWPL-4582
Problem:
g12b revb osd blend shift issue still exist
when hdr enable/disable
Solution:
used line_n_int to trigger osd hdr rdma,
this workaround can fix shift issue
Verify:
verify by g12b revb
Change-Id: I062c31dbb5729463bae539e2ea25281d715665c9
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Pengcheng Chen [Wed, 20 Feb 2019 01:38:02 +0000 (09:38 +0800)]
rdma: used line_n_int to trigger osd, dv and hdr rdma [1/2]
PD#SWPL-4582
Problem:
g12b revb osd blend shift issue still exist
when dv and hdr enable/disable
Solution:
used line_n_int to trigger osd, dv and hdr rdma,
this workaround can fix shift issue
Verify:
verify by g12b revb
Change-Id: Ie9747b2f7aaa3a7997245f82d15831c4c3da41cf
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Yi Zhou [Mon, 25 Feb 2019 12:02:11 +0000 (20:02 +0800)]
dv: remove g12b ver B from the status of SDR mode [1/1]
PD#SWPL-4582
Problem:
g12 verA has a hardware bug.Therefore,dv cores
must keep working even if under sdr mode
Solution:
g12B verB has fixed this bug, so remove this chip id
Verify:
verify by g12b revb
Change-Id: Ice1aa1364319fa12d5a896fdfd106450f1a04d3d
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Pengcheng Chen [Mon, 14 Jan 2019 09:07:48 +0000 (17:07 +0800)]
osd: add g12b revb to check osd shift workaround [1/1]
PD#SWPL-4582
Problem:
g12b revb fix osd blend shift issue
Solution:
add g12b revb to remove shift workaround
Verify:
verify by g12b revb
Change-Id: I6cefba0b5b5cce35d928edafdc359adff0165866
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
he.he [Fri, 25 Jan 2019 07:44:08 +0000 (15:44 +0800)]
usb: check SoC rev [1/2]
PD#SWPL-4582
Problem:
Need to check Soc rev to distinguish G12B revB.
Solution:
Check Soc rev set version and phy-interface for g12b revB.
Test: make w400 bootimage
Verify:
pass on W400
Change-Id: I338d7f0eed7bb61660625343404f756f0edf0d54
Signed-off-by: he.he <he.he@amlogic.com>
Qiufang Dai [Wed, 23 Jan 2019 13:39:38 +0000 (21:39 +0800)]
cpuversion: add SoC rev api [1/2]
PD#SWPL-4582
Problem:
Need api to distinguish G12B revB
Solution:
Add rev A/B/C api
Verify:
W400
Change-Id: I5cf82fcfc513f621513914cf83d18fe5c5ec081d
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
yuehu mi [Thu, 17 Jan 2019 12:51:44 +0000 (20:51 +0800)]
usb: remove usbphy reset 500ms wait [1/1]
PD#SWPL-4949
Problem:
kernel slow startup
Solution:
remove usbphy reset 500ms wait
Verify:
marconi platform insert U disk, power on boot verify OK
Change-Id: Ieb01e59ad428f98c3df303c7b3bee28397970c74
Signed-off-by: yuehu mi <yuehu.mi@amlogic.com>
Kaifu Hu [Thu, 20 Dec 2018 05:20:53 +0000 (13:20 +0800)]
dv: dolby vision support on t962x [1/1]
PD#SWPL-3318
Problem:
Android P not support dolby vision on t962x
Solution:
Porting code support dolby vision
Verify:
t962x/r311
Change-Id: I85afd05d2cb21a7105ea345f07e7e581bba5e927
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Jian Cao [Tue, 27 Nov 2018 06:42:57 +0000 (14:42 +0800)]
osd: osd: screen blank after boot logo [1/1]
PD#172587
Problem:
screen blank after boot logo
Solution:
correct default display information
Verify:
verified on tl1 ref board
Change-Id: I94237b5241eacee6965bfe4ea0426bb8e9f494f1
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
osd: tl1 hold line fix needn't shift workaround [1/1]
PD#172587
Problem:
tl1 hold line fix needn't shift workaround.
Solution:
remove shift workaround int tl1
Verify:
verified by x301
Change-Id: I96d99758ba6f93622c34a8e69c4a3f769fdfad49
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
usb: bringup usb for tl1 [1/1]
PD#172587
Problem:
bringup usb for tl1
Solution:
bringup usb for tl1.
disable usb device sof interrupt for tl1.
Verify:
verify on tl1 skt.
Change-Id: Ifbcd3b406145ac39709ff2df795544086277f00e
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/mesontl1.dtsi
Hong Guo [Mon, 14 Jan 2019 07:53:22 +0000 (15:53 +0800)]
CPUFREQ: Setting different cpufreq tables according to efuse information. [1/1]
PD#SWPL-4035
Problem:
Setting different cpufreq tables according to efuse information.
Solution:
Setting different cpufreq tables according to efuse information.
Verify:
g12a_u200, verify pass
Change-Id: I1bf571f332244f5727ef3cd8743f215f71248146
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Shunzhou Jiang [Wed, 9 Jan 2019 09:42:52 +0000 (17:42 +0800)]
mailbox: mailbox: add chip performance info read from efuse [2/2]
PD#SWPL-4035
Problem:
cpu driver need read efuse data
Solution:
add interface to read data
Verify:
g12a_skt
Change-Id: Ia5d74c3fa057d06426b4277652e508714400a30f
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Hong Guo [Tue, 22 Jan 2019 06:25:58 +0000 (14:25 +0800)]
cpufreq: add more syspll freq info [1/1]
PD#SWPL-4035
Problem:
add more syspll freq info.
Solution:
add more syspll freq info.
Verify:
g12a_u200, verify pass
Change-Id: I3e2a587f5ebaa20126e6ad5c37bd9d2730a75125
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Jian Cao [Tue, 22 Jan 2019 09:16:17 +0000 (17:16 +0800)]
gdc: reset alloc flag when free dma buffer [2/2]
PD#SWPL-4354
Problem:
alloc flag is not correct when free dma buffer
Solution:
reset alloc flag when free dma buffer
Verify:
test pass on g12a-u200
Change-Id: Idfc0be5b394d18799232f6239b3f6c6df9181ce0
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Jian Cao [Fri, 18 Jan 2019 07:33:52 +0000 (15:33 +0800)]
ge2d: reset alloc flag when free dma buffer [1/2]
PD#SWPL-4354
Problem:
alloc flag is not correct when free dma buffer
Solution:
reset alloc flag when free dma buffer
Verify:
test pass on g12a-u200
Change-Id: I4aea27f38ebda72cfe77183423600c918b836d7c
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Brian Zhu [Fri, 25 Jan 2019 05:27:59 +0000 (13:27 +0800)]
vpp: force vd2 using preblend when playing mvc [1/1]
PD#SWPL-3381
Problem:
vd2 used postblend as default after g12a chip
Solution:
force vd2 using preblend when playing mvc
Verify:
Locally on u212
Change-Id: Ia7fab8ad70ed1e58b7ade241828afab288b94bec
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Hanjie Lin [Fri, 14 Dec 2018 11:39:58 +0000 (19:39 +0800)]
perf_event: aml pmu interrupts routing on g12b [1/1]
PD#SWPL-3088
Problem:
g12b big-little cluster is different from other SoC with pmu
interrupts and registers.
software modifications must adapt to the difference.
Solution:
modify
Verify:
u200 w400
Change-Id: If9217c1025dff5c17d51790f8c216e31b7d6532b
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Hanjie Lin [Wed, 2 Jan 2019 05:36:09 +0000 (13:36 +0800)]
defconfig: arm: code score is low by Antutu benchmark [1/1]
PD#SWPL-3704
Problem:
32bit code score is low by Antutu benchmark.
PD#SWPL-3704
Solution:
enable CONFIG_SCHED_WALT CONFIG_CGROUP_SCHEDTUNE CONFIG_SCHED_TUNE
referenced by arm64
Verify:
w400
Change-Id: I6f461020b0fb0e42be94f1c66f5c38defb2c6ea1
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Yi Zhou [Tue, 15 Jan 2019 07:31:13 +0000 (15:31 +0800)]
dv: close afbc2 when playing sources with unnecessary el [1/1]
PD#SWPL-915
Problem:
DOLBY only sets the enhancement for the first frame ->
Vd sets cur_dispubf2 according to enhance ->
codec_mm keeps the last frame according to cur_dispbuf2,
so it fails -> AFBC2 access to the released content causes the trigger.
Solution:
close afbc2
Verify:
r321
Change-Id: I03c431a6ea11b8aabf97b1f0b21f717024be2f62
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Pengcheng Chen [Fri, 18 Jan 2019 05:30:52 +0000 (13:30 +0800)]
osd: fix osd_reverse casued afbc decode error [1/1]
PD#SWPL-4335
Problem:
osd_reverse casued afbc decode error
Solution:
add afbc prefect reverse when osd_reverse
Verify:
verify by tl1
Change-Id: I11730121e62935683480f42db7c43365bc91bf31
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Jiamin Ma [Thu, 17 Jan 2019 11:42:45 +0000 (19:42 +0800)]
Kconfig: fix errorly select meson8b for ARMv8 AARCH32 [1/1]
PD#SWPL-4320
Problem:
The meson8b and arm64_a32 are both selected in Kconfig,
which is quite misleading
Solution:
Disable meson8b when arm64_a32 is selected
Verify:
Locally passed for Ampere
Change-Id: I93f55239ea90bf8cf6b96e108b6fd4a239de32b4
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Pengcheng Chen [Fri, 11 Jan 2019 02:54:46 +0000 (10:54 +0800)]
gdc: add gdc dma_buf input/output support [2/2]
PD#SWPL-4036
Problem:
gdc don't support export dma_buf
Solution:
add gdc dma_buf input/output support
Verify:
test pass on w400
Change-Id: I67a60ede01e5c01630a00fbae2821430a870c2b8
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
MAINTAINERS
Pengcheng Chen [Thu, 3 Jan 2019 07:50:50 +0000 (15:50 +0800)]
ge2d: add ge2d dma_buf support [1/2]
PD#SWPL-4036
Problem:
don't support dma_buf
Solution:
add ge2d dma_buf support
Verify:
test pass on w400
Change-Id: I1277d04fb30753e579d5edc5f46f2406dc27217a
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Ruixuan Li [Tue, 8 Jan 2019 10:33:59 +0000 (18:33 +0800)]
emmc: modify dtb malloc method [1/1]
PD#SWPL-3951
Problem:
buffer malloc for dtb may failed
Solution:
malloc may sleep to wait for enough memory
Verify:
pass on p212
Change-Id: Ib4c266c17140d2a6abf2aea6c02b2ff591f0fe08
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Bichao Zheng [Fri, 15 Feb 2019 08:34:28 +0000 (16:34 +0800)]
gpio_led: g12a: give up using led-trigger cpu0 [1/1]
PD#SWPL-4876
Problem:
32bit will operate led-trigger cpu0 in cpu idle enter/exit causing
system led flashing.
Solution:
give up using led-trigger cpu0.
Verify:
g12a_u211 g12a_u212
Change-Id: I106a4fe0e35923919f5bbc34113fa73a4ca28577
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/g12b_a311x_w411_buildroot.dts
Jian Hu [Tue, 18 Dec 2018 09:07:20 +0000 (17:07 +0800)]
clk: g12a: add bt656 clock [1/1]
PD#SWPL-3359
Problem:
the bt656 clocks were missing
Solution:
1.add bt656 clocks
2.fix several errors for media clocks
Verify:
test passed on u200
Change-Id: Iff69e790c78335930d6b2ea54f7544aca464e1fb
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Xuhua Zhang [Wed, 19 Dec 2018 03:32:30 +0000 (11:32 +0800)]
bt656: fix bt656 bugs [1/1]
PD#OTT-1022
Problem:
bt656 can not work well.
Solution:
1. add clock control
2. fix bt656 id bug
Verify:
G12A U200
Change-Id: I2aaecee33fd590497d5a11cf3618fc07264f02a5
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
Yong Qin [Mon, 14 Jan 2019 08:50:12 +0000 (16:50 +0800)]
cec: ceca register access fail [1/1]
PD#SWPL-4133
Problem:
cec a register access fail and cause watchdog reboot
Solution:
reduce wait counter, and check clk register
Verify:
P215
Change-Id: Ic9d97e1eca9428ffd0c4a6bfe008cd9d8303075b
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
drivers/amlogic/cec/hdmi_ao_cec.h
Yong Qin [Tue, 8 Jan 2019 09:02:34 +0000 (17:02 +0800)]
di: aptimise di flow, add some protection [1/1]
PD#SWPL-3976
Problem:
To prevent “stall when access DDR through memory interface”
Solution:
1.aptimise NRWR register access flow
2.add arb on/off and status check
3.add reset protect
4.add nr_en disable before arb status check
5.add nr_write_done sel
6.modify VPU_WRARB_MODE_L2C1 from vlsi feijun's suggest
Verify:
tl1, txlx
Change-Id: Ifb0f4f0502d957ffb2b07805575c27f4166d5717
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
drivers/amlogic/media/deinterlace/deinterlace.c
jintao xu [Thu, 31 Jan 2019 11:15:24 +0000 (19:15 +0800)]
omx: add print into level control [1/1]
PD#SWPL-85
Problem:
print into level control
Solution:
print into level control
Verify:
U212
Change-Id: Ib0fdc02f26e75c20e48171bca5ebef072947d78c
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
jintao xu [Wed, 16 Jan 2019 02:14:49 +0000 (10:14 +0800)]
omx: add two layer support [3/6]
PD#SWPL-85
Problem:
Need support two video layers feature
Solution:
1: Add videosync.
2: amlvideo support multi-instance
Verify:
U212
Change-Id: I3570fad361ba5bd388dd46c51a66da056fa7a1fd
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
MAINTAINERS
drivers/amlogic/media/deinterlace/deinterlace_hw.c
Brian Zhu [Thu, 17 Jan 2019 19:25:21 +0000 (03:25 +0800)]
vpp: add osd and video zorder control [2/6]
PD#SWPL-85
Problem:
Upper layer need control osd and video layer zorder
Solution:
1.Add video layer zorder interface by sysfs and ioctl
2.Switch the osd and video layer order in vsync
Verify:
Verify on U212
Change-Id: Ic50e81784b865cc57e4ab9a63d74806f7a8721cf
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Brian Zhu [Tue, 15 Jan 2019 21:12:00 +0000 (05:12 +0800)]
vpp: add two layers support for each chips [1/6]
PD#SWPL-85
Problem:
Need support two video layers feature
Solution:
1.Add vd2 mif config
2.Add vd2 pps calculation and config
3.Add vd2 axis/crop/screen mode interface by sysfs and ioctl
4.Add layer query/alloc/free interface
Verify:
Verify on U212
Change-Id: I71fc9ab2ae0230c3e84c4b790e77d2c790951642
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
wenfeng.guo [Mon, 12 Nov 2018 03:15:24 +0000 (11:15 +0800)]
sr: add support for tl1 [1/1]
PD#172587
Problem:
Add sr driver support for tl1
Solution:
add sr driver support for tl1
fix horizontal line when play video on 4K screen
Verify:
TL1 X301
Change-Id: I422f27eb5cf12f69dc57de295425536671e2df38
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>
Brian Zhu [Thu, 15 Nov 2018 16:38:41 +0000 (00:38 +0800)]
video: vpp: add vd afbc YUV 422/444 support for tl1 [1/1]
PD#172587
Problem:
Bringup TL1 vidoe driver.
TL1 need support YUV422/444 AFBC.
TL1 need check afbc source from decode or vdin.
TL1 need afbc compress loss mode.
Solution:
Merge from branch bringup/amlogic-4.9/tl1-
20181111.
Verify:
verify on tl1
Change-Id: I0af62e7638db4e1c349df874ccffdeddcaa715af
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Brian Zhu [Wed, 26 Dec 2018 10:55:36 +0000 (18:55 +0800)]
vpp: sr: disable core0 and core1 scaler latch [1/1]
PD#SWPL-3144
Problem:
The latch function cause the super scaler size asynchronous
Solution:
Disable sr core0 and core1 scaler latch
Verify:
T962x2 x301 board test pass
Change-Id: Iecbcc3e0c751093b6515f7b46973eca2157cd349
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Chao Liu [Tue, 12 Feb 2019 09:38:30 +0000 (17:38 +0800)]
dts: g12a/b: config hw rng with dts [1/1]
PD#OTT-2062
Problem:
Boot up time with power cable is longer than boot up with usb cable
Solution:
config hw rng with dts
Verify:
android p + u212
Change-Id: I61613e945dbc9be06f2cbb29aae5043c84fca1de
Signed-off-by: Chao Liu <chao.liu@amlogic.com>
Pengcheng Chen [Tue, 18 Dec 2018 05:15:36 +0000 (13:15 +0800)]
osd: fix some fence issue [2/2]
PD#SWPL-3348
Problem:
fix some fence issue
Solution:
1. add blank operation to FBIOPUT_OSD_SYNC_RENDER_ADD
2. move canvas_config to osd_setting_blend
Verify:
verify by franklin
Change-Id: I5d1ebb697ff542e5c36dab0dae9b322ec4e1fa16
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Zongdong Jiao [Mon, 11 Mar 2019 07:55:09 +0000 (15:55 +0800)]
hdmitx: sync hdmi_audio uevent to hdmi hpd
Change-Id: I39512030f058ab9c72ee4c779f3b692898440271
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Zhuo Wang [Fri, 20 Jul 2018 03:10:50 +0000 (11:10 +0800)]
ethernet: handle tx timeout
PD# 169839
After do suspend/resume circularly, sometimes ethernet can't recover from
suspend. Add a phy reset when every resume.
Change-Id: Id03223a9c62f4dcab1cdfbc4805cc3b4c0212cf5
Signed-off-by: Shen Liu <shen.liu@amlogic.com>
Shuai Li [Fri, 22 Feb 2019 04:57:33 +0000 (12:57 +0800)]
audio: fix samesource clk after play DDP [1/1]
PD#SWPL-4331
Problem:
Same source clk doesn't recover to 48K
after playback 192k DDP stream.
Solution:
Add ways to recover the clk.
Verify:
Local verified
Change-Id: If410d9ca04446c35bafebe2913b01e19b5fee224
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Shuai Li [Fri, 1 Mar 2019 13:48:35 +0000 (21:48 +0800)]
audio: audio glitch at tdm startup [1/1]
PD#SWPL-5219
Problem:
audio glitch at tdm startup
Solution:
Pad 0 data to clear the remaining data
in the module.
Verify:
Local tested.
Change-Id: Iab526c6893a32030799567b57e05e7bb11b8fea0
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Yingwei Long [Thu, 28 Feb 2019 12:01:24 +0000 (20:01 +0800)]
tsync: do not operate tsync_mode_switch before first video toggled [1/1]
PD#SWPL-5131
Problem:
Some stream in tunnel mode, first audio pts is large than
AV_DISCONTINUE_THREDHOLD_MAX(60s). In audio_hw it will check pcr and
apts diff, so large difference between pcr and apts will lead sync mode
from amster to vmaster(egg:SYNC-HEVC-59FPS-DDP51)
Solution:
do not operate tsync_mode_switch before first video toggled
Verify:
verify by franklin
Change-Id: Icec2de71ea8f838146444aa3ea880f76ed8e0f13
Signed-off-by: Yingwei Long <yingwei.long@amlogic.com>
shuanglong.wang [Sun, 24 Feb 2019 07:45:02 +0000 (15:45 +0800)]
video: set vpp super_scaler default to 0 [1/1]
PD#SWPL-5113
Problem:
video flash when resolution change from 4K to 640x480
Solution:
temporary solution for video flash for u212
Verify:
verify by u212
Change-Id: I8b7ec009bf599032c7bff5f80b72b557403355da
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Jian Wang [Fri, 1 Feb 2019 08:08:05 +0000 (16:08 +0800)]
video: fixed video peek get first frame toggled err [1/1]
PD#SWPL-4048
Problem:
video peek can not get first frame toggled on 64bit
Solution:
add the cmd to amvideo_compat_ioctl
Verify:
verify on p212
Change-Id: I6933f305382d636f5f98f4bf19fddcf6ce9471c1
Signed-off-by: Jian Wang <jian.wang@amlogic.com>
Yi Zhou [Tue, 15 Jan 2019 03:08:52 +0000 (11:08 +0800)]
hdmitx: eliminate the work of sdr effect when choosing hdr [1/1]
PD#SWPL-4079
Problem:
hdr->sdr must have 1.5s delay, when switching from sdr->hdr
the work queue can't be eliminated in time.
Solution:
eliminate the work of sdr effect when choosing hdr
Verify:
u212
Change-Id: I4c1d5467a58253ffa2fa12dfbac7f504d0388a00
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Cheng Tong [Wed, 23 Jan 2019 06:00:13 +0000 (14:00 +0800)]
dts: g12a: add clk_81 to enable demux pcr [1/1]
PD#SWPL-4469
Problem:
dolby files have no sounds after replay
Solution:
in u212, the clk_81 is null when init, it is related
to demux pcr, so add clk_81 to enable demux pcr
Verify:
verify by franklin
Change-Id: Id862e4e8ac49c19bbd52fa6fa4831de20abad6c8
Signed-off-by: Cheng Tong <cheng.tong@amlogic.com>
Guosong Zhou [Thu, 17 Jan 2019 09:17:20 +0000 (04:17 -0500)]
isp: config temper buffer size in dts [1/2]
PD#SWPL-4177
Problem:
temper buffer size is a fixed value in code
Solution:
config temper buffer size from dts
Verify:
verify by w400
Change-Id: I17ef428221f149a888e0318bc27d7b7d309c00ce
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Guosong Zhou [Sat, 5 Jan 2019 07:17:20 +0000 (02:17 -0500)]
camera: support the dvp camera [1/1]
PD#SWPL-2133
Problem:
don't support dvp camera
Solution:
add dvp camera driver
Verify:
verify by u200
Change-Id: I8517913e0c3724247b396e8d054d6a4541a1993a
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Guosong Zhou [Wed, 2 Jan 2019 11:00:30 +0000 (06:00 -0500)]
camera: add dvp camera [1/1]
PD#OTT-1204
Problem:
don't support dvp camera
Solution:
add dvp camera gc2145 camera driver
Verify:
test pass on U200
Change-Id: I5927d49a93952587af7bb460a5c405293d692153
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
MAINTAINERS
shuanglong.wang [Thu, 17 Jan 2019 09:58:00 +0000 (17:58 +0800)]
video: video peek do not post video start event [1/1]
PD#SWPL-4317
Problem:
for video peek, before audio post audio start, video may have rended.
Solution:
do not post video start for video peek, all wait for audio start to
start pcr
Verify:
verify by p212
Change-Id: If5656154e30613164465f84c44d3fd1ee386d654
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Huan Biao [Fri, 18 Jan 2019 05:33:25 +0000 (13:33 +0800)]
arm64: dts: gxl: optimize ipa parameter [1/1]
PD#SWPL-3726
Problem:
game cannot run smoothly
Solution:
1:modify cooling devices min status
cpufreq 1000Mhz-->1200Mhz
gpufreq 400MHz -->500MHz
2:modify switch trippoint freq trippoint hotplug trippoint
70000-->80000
80000-->90000
85000-->100000
Verify:
p215 pass
Change-Id: I36d8ac8ca578f92c8aeda7d979df1f3f56311ce3
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Huan Biao [Mon, 7 Jan 2019 02:49:26 +0000 (10:49 +0800)]
arm: dts: gxl: optimize ipa parameter [1/1]
PD#SWPL-3726
Problem:
game cannot run smoothly
Solution:
1:modify cooling devices min status
cpufreq 1000Mhz-->1200Mhz
gpufreq 400MHz -->500MHz
2:modify switch trippoint freq trippoint hotplug trippoint
70000-->80000
80000-->90000
85000-->100000
3:fix gpupp get fail issue
Verify:
p215 pass
Change-Id: Id0a1e1ac9619f0d9a20e2aad172ba0c84c7a2e9d
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Pengcheng Chen [Tue, 22 Jan 2019 06:42:34 +0000 (14:42 +0800)]
osd: fix a green line displayed when output is yuv420 4k/60hz [1/1]
PD#SWPL-4427
Problem:
a green line displayed when output is yuv420 4k/60hz
Solution:
set dummy data to 0x808000 can fix a green line
displayed when output is yuv420 4k/60hz
Verify:
verify by fanklin
Change-Id: I06125d36c2fb06a61dd072a1789217e7c3705207
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
riqun.ou [Thu, 8 Nov 2018 07:47:32 +0000 (15:47 +0800)]
sound: add resample node for axg_s420_v03gva.dts [1/1]
PD#SWPL-365
Problem:
System can't use resample function on GVA project.
Solution:
Add resample node in axg_s420_v03gva.dts
Verify:
Passed on s420
Change-Id: Ie48c579e9e9f6e1d61147f5410c95e5bca55b0a7
Signed-off-by: riqun.ou <riqun.ou@amlogic.com>
audio: codecs: fix TL1 reference board volume too small [2/2]
PD#SWPL-2652
Problem:
X301/T309 AMP volume configured to small
Solution:
change the default external AMP codec mixer name to a match
the ini parsing function in audio hal.
TODO: need dynamically check the different codec mixer name
in ini file.
Verify:
verify by x301
Change-Id: Iba835d37ea02bec3095556d54fbf327bd6390904
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
audio: codec: the DAC gain set of acodec not work [1/1]
PD#SWPL-3134
Problem:
the DAC gain set is not work
Solution:
update and aml_codec_tl1_acodec.c, change the method of
getting codec pointer from kcontrol pointer.
Verify:
verify by T962x2_X301 board
Change-Id: I02f02b73fab3b8391ef4866a71ffaf0d48bbbbbf
Signed-off-by: Shuyu Li <shuyu.li@amlogic.com>
audio: add tas5805 [1/1]
PD#SWPL-3081
Problem:
compatiable tas5805 module
Solution:
add tas5805 drivers
Verify:
T962X2
Change-Id: I3608e47fe768af0f924751a8bcc103389d0811de
Signed-off-by: Yonghao Jiao <yonghao.jiao@amlogic.com>
audio: auge: add HDMIRX SPDIF in support [1/2]
PD#SWPL-2956
Problem:
HDMI in DTS/Dolby input has noise when treated to LPCM
Solution:
By default,we are using PAO mode for HDMIRX,but we have not
enabled the PaPb search for 61937 raw data input, after add
that, we can detect the raw data, but it can not by clear when
switch from NONE-LPCM to NONE-LPCM, need add IRQ function to
clear that by sw.we enabled spdif in from HDMIRX, which is the same
design as txl/txlx.we can get the Pc information now.
also we add a new interface to set spdif in source when hdmirx input.
Verify:
x301
Change-Id: I3c4e8b387308ef862a069c29d15b8b5a9e865564
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
udio: auge: tl1 acodec mapping to data 1 [1/2]
PD#SWPL-3277
Problem:
tl1 internal codec volume can by adjusted
Solution:
configure the acodec data layout mapping
to a fixed volume
Verify:
x301
Change-Id: I14d3762b39a0a5291722ef5489026f10fc960120
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/tl1_t962x2_t309.dts
audio: Fix TDM not wokring on HDMI I2S in [1/1]
PD#SWPL-2887
Problem:
When TDM is used for HDMI I2S in, the solt set is wrong.
Solution:
Fix the lane max value from 3 to 4
Verify:
A113
Change-Id: I33f5ca21bf1e2407d83fa5d0f22e21f7b1f5e749
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
audio: codec: fix to resume ad82584's volume after suspend [1/1]
PD#SWPL-3456
Problem:
1) After suspend, volume is not resume
2) ARC connected, still sound out from spk
Solution:
1) save channel volume when suspend, then resume the volume
2) add mute mixer control for ad82584
Verify:
x301
Change-Id: Ic6e7502e3f9689cc2d1053295f26aaf4d5be2603
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
audio: auge: add vad driver [1/1]
PD#SWPL-2404
Problem:
VAD for wake up
Solution:
Add vad driver to fetch VAD buffer and ALSA buffer, in userspace, they
will be combined for wakeup engine
Verify:
x301
Change-Id: I3b4de5fdfe173ce18e58a187a3adeda601e226b3
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
audio: fix pop snd after bootup [2/2]
PD#SWPL-3178
Problem:
output big pop noise after system boot up.
Solution:
Add zero and then unmute the stream.
NOTICE: user should unmute the
AD82584F after boot.
Verify:
local verified.
Change-Id: I21555318f9347c5340a28f7e5cf0e3e2cde849a0
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
audio: fix no audio after resume of
ad82584f [1/1]
PD#SWPL-4090
Problem:
No audio after suspend and resume.
Suspend won't save the mute value,
and after resume, it could not be restored.
Solution:
Add a mute val to save when suspend,
and after resume, restore the mute value.
Verify:
Verified by QA.
Change-Id: Ie24bb11f5c565048391846a66b5d12bab1d55666
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
audio: auge: fix sharebuffer channel map [1/1]
PD#SWPL-2645
Problem:
play ddp source, then play pcm source, no sound
Solution:
1. fix same source control and channel map issue
2. i2s 8ch, spdif 2ch, channels are not mapped, make spdif 8 channel mask
3. when same source used, keep mpll use same mpll
Verify:
x301
Change-Id: I2fe4bbcbcbfff0a1c1a6cebf61d1da5aba9b7a9d
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/tl1_t962x2_t309.dts
arch/arm64/boot/dts/amlogic/tl1_t962x2_x301.dts
audio: add stream mute and continuous clk [1/1]
PD#SWPL-2952
Problem:
Pop noise could be heard
when switching between sources.
Solution:
1. Add stream digital mute functions.
2. continuous clock to eliminate
the clk reset issue.
Verify:
Local verified.
Change-Id: I372f4c03aaf875d75aa903c9c2dfda00619af000
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
dts: tl1: enable resample for tl1 [1/2]
PD#SWPL-3365
Problem:
not resample for audio in, so output in wrong sample rate
Solution:
1. enable resample in dts
2. fix to check whether resample is needed
Verify:
x301
Change-Id: I99238cc21a00ab53df6a1f8ab1703bc9ab48cbaa
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/tl1_t962x2_t309.dts
arch/arm64/boot/dts/amlogic/tl1_t962x2_x301.dts
shuanglong.wang [Thu, 10 Jan 2019 13:12:12 +0000 (21:12 +0800)]
video: omx get first frame toggoled flag [1/2]
PD#SWPL-4048
Problem:
omx can not detect first frame have toggled
Solution:
omx get first frame toggoled flag
Verify:
verify by p212
Change-Id: I632824390287dd0257dca23a009ff8851054f68d
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Yi Zhou [Fri, 11 Jan 2019 03:31:16 +0000 (11:31 +0800)]
dv: keep dv enable when connecting to sdr TV [1/1]
PD#SWPL-3226
Problem:
turn off the dv core, the osd flutters
Solution:
keeping core2 open when dv enable under sdr TV
Verify:
u212
Change-Id: Idf57c6e67676fb5eec944e543cb596247c932df4
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Luan Yuan [Wed, 16 Jan 2019 13:44:38 +0000 (21:44 +0800)]
hdmitx: fixed logo flash error [1/1]
PD#SWPL-4194
Problem:
array need to initial.
Solution:
fixed it.
Verify:
verify by ampere
Change-Id: Ia72eb1afa54f092bbbb7265694ecec314691b14e
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Kaifu Hu [Tue, 15 Jan 2019 06:43:08 +0000 (14:43 +0800)]
hdmi: fix uboot logo flash [1/2]
PD#SWPL-4194
Problem:
Systemcontorl set display mode when attr is difference
Solution:
Fix color space property parser
Verify:
G12A/U200
Change-Id: Iddbcbbf3925b175833f534a287de413315ca1170
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Jihong Sui [Thu, 10 Jan 2019 12:48:47 +0000 (20:48 +0800)]
deinterlace: change holdline default value to 8 [1/1]
PD#SWPL-3384
Problem:
DI post holdline setting is not map with video
Solution:
change holdline to 8
Verify:
verified by gxl
Change-Id: Ia352604086cefb4c69d5dd268d12741c4cf4f173
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Cheng Tong [Mon, 14 Jan 2019 06:33:07 +0000 (14:33 +0800)]
dts: u212 2G ddr add dvb dts config [1/1]
PD#SWPL-4140
Problem:
u212 2G dts didn't have dvb config
Solution:
add dvb dts config
defalut commented out as reference
Verify:
Verify by Android P franklin
Change-Id: I1ffc631ff0a729e6701fd8cd17b28f70666b1e30
Signed-off-by: Cheng Tong <cheng.tong@amlogic.com>
Pengcheng Chen [Fri, 11 Jan 2019 09:40:36 +0000 (17:40 +0800)]
osd: afbc decode error when write afbc start before afbc reset [1/1]
PD#SWPL-4016
Problem:
afbc decode error when write afbc start before afbc reset reg
Solution:
replace invalid reg when found afbc start before afbc reset reg
Verify:
test pass on franklin
Change-Id: Ia01608fe4d5c6132d0b54e63c48560e9e77bfe0a
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Yi Zhou [Fri, 11 Jan 2019 02:49:11 +0000 (10:49 +0800)]
dv: mute the first frame when playing video [1/1]
PD#SWPL-4091
Problem:
due to the ip bug, the first frame has dirty data
Solution:
mute the first frame
Verify:
u212
Change-Id: Ia21e96c338b22e25d1073f27083f10634a09edad
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Luan Yuan [Fri, 11 Jan 2019 12:15:13 +0000 (20:15 +0800)]
Revert "canvas: get canvas w/h for frame check [2/2]"
This reverts commit
8667f1fbc184ccfc001a7006717cb0b5a7bdbdf9.
MingLiang Dong [Tue, 8 Jan 2019 13:23:33 +0000 (08:23 -0500)]
hdr: sdr2hdr on/off switch, osd flutter [1/1]
PD#SWPL-3038
Problem:
sdr2hdr on/off switch, osd flutter
Solution:
always enable osd1 hdr, if osd hdr bypass, set hdr bypass parameters
Verify:
verify on G12A
Change-Id: I4d5ae0588b06c4989b3a4f22b00ba41ef80be0d0
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
shuanglong.wang [Tue, 9 Oct 2018 09:33:14 +0000 (17:33 +0800)]
video: drain and hold frame when pattern broken. [1/1]
PD#SWPL-795
Problem:
video video caton
Solution:
1. For 23.97 and 29.97fps, broken patten case, such as 2323..2233..2323
(23.97), 222..2213(2)22(29.97) will hold one sync to toggle.
For 23.97 and 29.97fps, broken patten case, such as 2323..233223...2323
(23.97), 222..223122...22(29.97), will drain frame one sync to toggle.
2. For 24 and 30fps, every 16.6s will occur pattern broken, one frame
will display less vsync. For 24, will happen
22221222, for 30, will
happen
3232223232. Here will escape one sync and also hold one sync to
ensure pattern detection not broken, which others will lead patten
broken, and nothold or drain frame, then frame frezee or lost will
happen.
3. add pts-trace debug. Follow command could help debug video av sync.
echo 0x400000 > /sys/module/amvideo/parameters/debug_flag
echo 1,1,1 > /sys/kernel/debug/video/pts_log_enable
Above command will print too many debug info, you can use follow
echo 0 > /proc/sys/kernel/printk && dmesg -c > /dev/null
dmesg > kernel.log
Verify:
verify by p212
Change-Id: Icc03faec772937c273ca74be67f5c52ae25fea39
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Hui Zhang [Fri, 4 Jan 2019 06:35:51 +0000 (14:35 +0800)]
dts: release memory of the reserved 1MB [2/2]
PD#SWPL-2372
Problem:
phy addr (0 - 0x100000) is reserved before. once it is release for system use.
it will be polluted by video decoder (avs2 & vp9)
Solution:
init hw addr (not 0) in decoder to avoid 0 address polluted.
then release reserved 1MB memory space in dts
Verify:
U212
Change-Id: I36f6caa09267ab1180ff12cfed9b9c7befff2842
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
shihong.zheng [Tue, 6 Nov 2018 12:29:19 +0000 (20:29 +0800)]
canvas: get canvas w/h for frame check [2/2]
PD#SWPL-1738
Problem:
support frame crc32 check and dump yuv.
Solution:
support frame check and yuv dump in media_module, add interface
to get canvas width/height.
Verify:
u212
Change-Id: Ieadc95521c4a21bec5685f8c8926d3bb2f92637b
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
rongrong zhou [Mon, 7 Jan 2019 08:14:56 +0000 (16:14 +0800)]
video: disable video in early suspend [1/1]
PD#SWPL-2736
Problem:
suspend green screen
Solution:
disable video in early suspend
Verify:
Ampere
Change-Id: If5ad13d2964b1541791d95ffb239293ab1e4ffb6
Signed-off-by: rongrong zhou <rongrong.zhou@amlogic.com>
Yi Zhou [Tue, 8 Jan 2019 05:59:32 +0000 (13:59 +0800)]
dv: set g12a/b core run_mode_delay as 0 [1/1]
PD#SWPL-3890
Problem:
when starting to play video, the manu bar shakes
Solution:
stb core don't need run mode delay.
Verify:
u212
Change-Id: If8634cfd33598343cef84b93d4757f5d5c9c72e5
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Yi Zhou [Tue, 8 Jan 2019 01:24:45 +0000 (09:24 +0800)]
dv: add compatibility to prevent panic [1/1]
PD#SWPL-3889
Problem:
when the metadata parsed by decode is error, the array will overflow
in dv module.
Solution:
dolby type just appears once in metadata. After parsing dolby type,
breaking the circulation directly.
Verify:
U212
Change-Id: I715e28c1b9a8aab2fcb4059dd132b5b98c043f31
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Yong Qin [Mon, 7 Jan 2019 07:59:00 +0000 (15:59 +0800)]
cec: too more log when cec bus error [1/1]
PD#SWPL-3921
Problem:
Too more log when cec bus error
Solution:
print the log at log level 1
Verify:
verified on tl1 android p
Change-Id: I8273e0a46470d59160f1ac8dc71494a9abb19b0f
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Zhuo Wang [Tue, 25 Dec 2018 08:16:50 +0000 (16:16 +0800)]
ethernet: setup tx_amp from efuse [1/1]
PD#SWPL-3552
Problem:
tx_v show different for each chip
Solution:
add new function to setup
Verify:
co-work with analog on G12B SOCKET board
Change-Id: I1f2711b9414464c7044efc3f3128cc3c3808cfc5
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
Shunzhou Jiang [Fri, 21 Dec 2018 09:12:01 +0000 (17:12 +0800)]
mailbox: mailbox: add eth calc data read interface [2/2]
PD#SWPL-3498
Problem:
ethernet need read data from efuse
Solution:
add interface to read data
Verify:
g12a_skt
Change-Id: I7ce7ffe2f194c875155e6db8acb55eb8ac5500a0
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Kaifu Hu [Wed, 2 Jan 2019 02:54:09 +0000 (10:54 +0800)]
hdmitx: disable spead spectrum when 4k mode [1/1]
PD#SWPL-3696
Problem:
Flash black screen when 4k mode
Solution:
Disable spead spectrum when 4k mode
Verify:
GXL/P215
Change-Id: I131633c26492548146cdc6e75a4d65b91cfd77ad
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Tao Zeng [Wed, 2 Jan 2019 06:47:13 +0000 (14:47 +0800)]
mm: fix range mistake for virt_check [1/1]
PD#SWPL-3793
Problem:
Address 0xC0000000 is in lowmem, which should not be warned by
virt_check:d input of virt:
c0000000
~~~~~~~~
CPU: 1 PID: 5141 Comm: Binder:3297_5 Tainted: G O 4.9.113 #1
Hardware name: Generic DT based system
[<
c030e760>] (show_stack+0x20/0x24)
[<
c06ee8a8>] (dump_stack+0x90/0xac)
[<
c031c7b4>] (virt_check+0x64/0x68)
[<
c049c45c>] (__check_object_size+0x184/0x1f8)
[<
c07058c0>] (copy_page_to_iter+0x288/0x5b8)
[<
c04425dc>] (generic_file_read_iter+0x390/0xa48)
[<
c049f238>] (__vfs_read+0xec/0x13c)
[<
c04a00e0>] (vfs_read+0x9c/0x164)
[<
c05ce7e8>] (sdcardfs_read+0x28/0x50)
[<
c049f194>] (__vfs_read+0x48/0x13c)
[<
c04a00e0>] (vfs_read+0x9c/0x164)
[<
c04a13ac>] (SyS_read+0x5c/0xbc)
[<
c0308980>] (ret_fast_syscall+0x0/0x48)
Solution:
Not warning for 0xC0000000 if virt address is equal to it
Verify:
R311
Change-Id: I9a3f8efe89564f31f9a49ab4448323c93ddc761d
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Nan Li [Fri, 28 Dec 2018 10:07:27 +0000 (18:07 +0800)]
sdio: optimize 1bit mode cfg [1/1]
PD#SWPL-3719
Problem:
optimize sdio 1bit cfg fail for dts.
Solution:
move MMC_PM_KEEP_POWER setting from
amlsd_get_host_caps(). so modify dts to
set 1bit mode.
Verify:
p212
Change-Id: I268f25a9550058e7bbf3562eec53c8cd92b58b1b
Signed-off-by: Nan Li <nan.li@amlogic.com>
Hui Zhang [Sat, 22 Dec 2018 08:55:43 +0000 (16:55 +0800)]
codec_mm: not to be blocked to wait scatter cache done [1/2]
PD#SWPL-2206
Problem:
decoding thread was blocked to wait scatter memory to be cached done. it
may take 30+ ms and lead to cts/vts fail
Solution:
not to wait scatter cached done. it save timing of system
Verify:
Verified U212
Change-Id: I75fa3e892e0b9b8023c07b62a31ebd43d3c92044
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
Lifeng Cao [Wed, 12 Dec 2018 03:22:07 +0000 (11:22 +0800)]
video: dv: Change omx pts upper and lower threshold for dv [3/3]
PD#SWPL-2465
Problem:
DV av-sync test diff between audio and video too big
Solution:
Change omx pts upper and lower threshold
Verify:
Test pass by S905X2-U212
Change-Id: I916773300b29a9b6368d7e2283effae2a6440d14
Signed-off-by: Lifeng Cao <lifeng.cao@amlogic.com>
Yao.Liu [Fri, 28 Dec 2018 12:38:21 +0000 (07:38 -0500)]
ion: add invalid cache function [1/1]
PD#SWPL-3736
Problem:
H265 encoder use ge2d to do format convert, ge2d dst
buffer is allocated from ion heap and is cached buffer.
The cache consistency problem caused encoded stream error.
Solution:
ION add invalid cache function, invalid cache before
CPU access cache buffer
Verify:
U212
Change-Id: Ib14f2a9ee5b536c3546c5957fd0505cacae45f80
Signed-off-by: Yao.Liu <yao.liu@amlogic.com>
Zhongfu Luo [Sat, 29 Dec 2018 05:12:08 +0000 (13:12 +0800)]
defendkey: change defendkey read function process [1/1]
PD#SWPL-3204
Problem:
GXL: need to fix bug for defendkey read function
Solution:
1.change defendkey read function process
Verify:
GXL skt board verify pass
Change-Id: I61c7e7074eefa1ab20bdb8fa31f970b39bfe5a1b
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Zhongfu Luo [Fri, 28 Dec 2018 08:16:28 +0000 (16:16 +0800)]
defendkey: change defendkey reserved memory process [1/1]
PD#SWPL-3706
Problem:
GXL: defenkey cause system crash
Solution:
1.change defendkey reserved memory process
2.limit reserved memory region
Verify:
GXL skt board verify pass
Change-Id: I23c6fe861803de96eccec9b643824eeae2c2e564
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Nan Li [Thu, 20 Dec 2018 09:21:24 +0000 (17:21 +0800)]
sdio: optimize data1 interrupt cfg reg error [1/1]
PD#SWPL-1908
Problem:
rtl 8822bs sdio wifi tx data crc when Online on demand.
Solution:
remove cfg reg invalid setting in enable_sdio
when data1 interrupt breaks.
Verify:
u212
Change-Id: I49e21a6d213d9c60e315d23bdf9937385b6d75e9
Signed-off-by: Nan Li <nan.li@amlogic.com>
Nanxin Qin [Wed, 26 Dec 2018 11:29:18 +0000 (19:29 +0800)]
codec_mm: add the flush cache away for the highmem [1/1]
PD#SWPL-3588
Problem:
bad using virt_to_pfn in stream_input ko
Solution:
add the flush cache away for the highmem.
Verify:
p212
Change-Id: I70fd18f97b5b91c9154b7eeb9f488d16113daf8d
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
Tao Zeng [Tue, 25 Dec 2018 11:17:25 +0000 (19:17 +0800)]
mm: check virt_to_xxxx macro on 32bit OS [1/1]
PD#SWPL-1909
Problem:
virt_to_page may get bad input with virtual address
in high mem.
Solution:
Check input address of this macro and get a warn print
Verify:
p212
Change-Id: I69d81f7aac43f1865d3d1112263276603de166ce
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
rongrong zhou [Tue, 11 Dec 2018 07:42:46 +0000 (15:42 +0800)]
dts: add netflix MGKID unify key [3/3]
PD#SWPL-2847
Problem:
add netflix MGKID support
Solution:
add netflix MGKID support
Verify:
ampere NTS
Change-Id: I7bf7f7b7527a36dc7b50f1a98bdb5d0a60af8741
Signed-off-by: rongrong zhou <rongrong.zhou@amlogic.com>
Pengcheng Chen [Mon, 24 Dec 2018 02:40:34 +0000 (10:40 +0800)]
osd: the border below has a green horizontal line [1/2]
PD#SWPL-3478
Problem:
the border below has a green horizontal line
Solution:
add freescale repeat last line, supported chip after G12B
Verify:
verify on T962X2-X301
Change-Id: I5dab91774eea3949062fe3254db7a074563fe1c4
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Brian Zhu [Wed, 26 Dec 2018 14:37:51 +0000 (22:37 +0800)]
vpp: set the preblend horz size correctly for hdr input [2/2]
PD#SWPL-3478
Problem:
the border below has a abnormal line
Solution:
Set the preblend horz size correct
Verify:
verify on T962X2-X301
Change-Id: Ie7b20a6b030d40d3a0eb3458df07e7632491aa2c
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Hanjie Lin [Fri, 23 Nov 2018 07:14:28 +0000 (15:14 +0800)]
dts: fix g12b energy-cost config error [1/1]
PD#SWPL-1007
Problem:
g12b a53 core energy-cost config is error.
Solution:
modify with right cost value
Verify:
w400
Change-Id: I1ffba5b147879a4178f255247f338b594e440eed
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Yi Zhou [Tue, 25 Dec 2018 09:08:39 +0000 (17:08 +0800)]
dv: fix the error setting in dv core [1/1]
PD#SWPL-3046
Problem:
movie player will keep video layer when playing video films.
Even if jumping to the next films, it will not close video layer.
When meeting this situation, dv core will keep the front
film's setting.
Solution:
when jumping the next film, we know the first frame.
So we clean the setting in the first frames.
Verify:
u212
Change-Id: I61ebc8f58baed32abc519018676e40b08d059cac
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Zhongfu Luo [Thu, 27 Dec 2018 09:47:20 +0000 (17:47 +0800)]
defendkey: script signing tool: support upgrade check [5/5]
PD#SWPL-3204
Problem:
GXL/TXLX/G12A/G12B: script signing tool need to support defendkey
Solution:
1.change dtb decrypt process
Verify:
GXL/TXLX/G12A/G12B skt board verify pass
Change-Id: I165db827dec82837edb8a4a5197090bbd79d536d
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Luan Yuan [Thu, 27 Dec 2018 08:32:23 +0000 (16:32 +0800)]
Revert "mm: check virt_to_xxxx macro on 32bit OS [1/1]"
This reverts commit
0d79066451f17a1fe66e8a1440c99371e58cf325.
Tao Zeng [Tue, 25 Dec 2018 11:17:25 +0000 (19:17 +0800)]
mm: check virt_to_xxxx macro on 32bit OS [1/1]
PD#SWPL-1909
Problem:
virt_to_page may get bad input with virtual address
in high mem.
Solution:
Check input address of this macro and get a warn print
Verify:
p212
Change-Id: I69d81f7aac43f1865d3d1112263276603de166ce
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Huan Biao [Thu, 20 Dec 2018 09:42:24 +0000 (17:42 +0800)]
thermal: cooldev: fix cpucore cool devices driver issue [1/1]
PD#SWPL-3334
Problem:
cpucore cool devices upper date type no match
cpucore num set error
Solution:
modify cpucore upper num check
Verify:
w400 pass
Change-Id: I83f829d31cab565d5ca3b892bb58a4a68b8f0f20
Signed-off-by: Huan Biao <huan.biao@amlogic.com>