Duoming Zhou [Fri, 15 Apr 2022 16:14:17 +0000 (19:14 +0300)]
ax25: fix UAF bugs of net_device caused by rebinding operation
commit
feef318c855a361a1eccd880f33e88c460eb63b4 upstream.
The ax25_kill_by_device() will set s->ax25_dev = NULL and
call ax25_disconnect() to change states of ax25_cb and
sock, if we call ax25_bind() before ax25_kill_by_device().
However, if we call ax25_bind() again between the window of
ax25_kill_by_device() and ax25_dev_device_down(), the values
and states changed by ax25_kill_by_device() will be reassigned.
Finally, ax25_dev_device_down() will deallocate net_device.
If we dereference net_device in syscall functions such as
ax25_release(), ax25_sendmsg(), ax25_getsockopt(), ax25_getname()
and ax25_info_show(), a UAF bug will occur.
One of the possible race conditions is shown below:
(USE) | (FREE)
ax25_bind() |
| ax25_kill_by_device()
ax25_bind() |
ax25_connect() | ...
| ax25_dev_device_down()
| ...
| dev_put_track(dev, ...) //FREE
ax25_release() | ...
ax25_send_control() |
alloc_skb() //USE |
the corresponding fail log is shown below:
===============================================================
BUG: KASAN: use-after-free in ax25_send_control+0x43/0x210
...
Call Trace:
...
ax25_send_control+0x43/0x210
ax25_release+0x2db/0x3b0
__sock_release+0x6d/0x120
sock_close+0xf/0x20
__fput+0x11f/0x420
...
Allocated by task 1283:
...
__kasan_kmalloc+0x81/0xa0
alloc_netdev_mqs+0x5a/0x680
mkiss_open+0x6c/0x380
tty_ldisc_open+0x55/0x90
...
Freed by task 1969:
...
kfree+0xa3/0x2c0
device_release+0x54/0xe0
kobject_put+0xa5/0x120
tty_ldisc_kill+0x3e/0x80
...
In order to fix these UAF bugs caused by rebinding operation,
this patch adds dev_hold_track() into ax25_bind() and
corresponding dev_put_track() into ax25_kill_by_device().
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
[OP: backport to 5.15: adjust dev_put_track()->dev_put() and
dev_hold_track()->dev_hold()]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Duoming Zhou [Fri, 15 Apr 2022 16:14:16 +0000 (19:14 +0300)]
ax25: fix reference count leaks of ax25_dev
commit
87563a043cef044fed5db7967a75741cc16ad2b1 upstream.
The previous commit
d01ffb9eee4a ("ax25: add refcount in ax25_dev
to avoid UAF bugs") introduces refcount into ax25_dev, but there
are reference leak paths in ax25_ctl_ioctl(), ax25_fwd_ioctl(),
ax25_rt_add(), ax25_rt_del() and ax25_rt_opt().
This patch uses ax25_dev_put() and adjusts the position of
ax25_addr_ax25dev() to fix reference cout leaks of ax25_dev.
Fixes:
d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220203150811.42256-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[OP: backport to 5.15: adjust context]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Duoming Zhou [Fri, 15 Apr 2022 16:14:15 +0000 (19:14 +0300)]
ax25: add refcount in ax25_dev to avoid UAF bugs
commit
d01ffb9eee4af165d83b08dd73ebdf9fe94a519b upstream.
If we dereference ax25_dev after we call kfree(ax25_dev) in
ax25_dev_device_down(), it will lead to concurrency UAF bugs.
There are eight syscall functions suffer from UAF bugs, include
ax25_bind(), ax25_release(), ax25_connect(), ax25_ioctl(),
ax25_getname(), ax25_sendmsg(), ax25_getsockopt() and
ax25_info_show().
One of the concurrency UAF can be shown as below:
(USE) | (FREE)
| ax25_device_event
| ax25_dev_device_down
ax25_bind | ...
... | kfree(ax25_dev)
ax25_fillin_cb() | ...
ax25_fillin_cb_from_dev() |
... |
The root cause of UAF bugs is that kfree(ax25_dev) in
ax25_dev_device_down() is not protected by any locks.
When ax25_dev, which there are still pointers point to,
is released, the concurrency UAF bug will happen.
This patch introduces refcount into ax25_dev in order to
guarantee that there are no pointers point to it when ax25_dev
is released.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
[OP: backport to 5.15: adjusted context]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Pandruvada [Fri, 19 Nov 2021 05:18:01 +0000 (21:18 -0800)]
cpufreq: intel_pstate: ITMT support for overclocked system
commit
03c83982a0278207709143ba78c5a470179febee upstream.
On systems with overclocking enabled, CPPC Highest Performance can be
hard coded to 0xff. In this case even if we have cores with different
highest performance, ITMT can't be enabled as the current implementation
depends on CPPC Highest Performance.
On such systems we can use MSR_HWP_CAPABILITIES maximum performance field
when CPPC.Highest Performance is 0xff.
Due to legacy reasons, we can't solely depend on MSR_HWP_CAPABILITIES as
in some older systems CPPC Highest Performance is the only way to identify
different performing cores.
Reported-by: Michael Larabel <Michael@MichaelLarabel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Michael Larabel <Michael@MichaelLarabel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Elder [Fri, 25 Feb 2022 20:15:30 +0000 (14:15 -0600)]
net: ipa: fix a build dependency
commit
caef14b7530c065fb85d54492768fa48fdb5093e upstream.
An IPA build problem arose in the linux-next tree the other day.
The problem is that a recent commit adds a new dependency on some
code, and the Kconfig file for IPA doesn't reflect that dependency.
As a result, some configurations can fail to build (particularly
when COMPILE_TEST is enabled).
The recent patch adds calls to qmp_get(), qmp_put(), and qmp_send(),
and those are built based on the QCOM_AOSS_QMP config option. If
that symbol is not defined, stubs are defined, so we just need to
ensure QCOM_AOSS_QMP is compatible with QCOM_IPA, or it's not
defined.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes:
34a081761e4e3 ("net: ipa: request IPA register values be retained")
Signed-off-by: Alex Elder <elder@linaro.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaoqian Lin [Sat, 8 Jan 2022 09:59:31 +0000 (09:59 +0000)]
soc: qcom: aoss: Fix missing put_device call in qmp_get
commit
4b41a9d0fe3db5f91078a380f62f0572c3ecf2dd upstream.
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling paths.
Fixes:
8c75d585b931 ("soc: qcom: aoss: Expose send for generic usecase")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220108095931.21527-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Price [Mon, 11 Apr 2022 15:22:32 +0000 (16:22 +0100)]
cpu/hotplug: Remove the 'cpu' member of cpuhp_cpu_state
commit
b7ba6d8dc3569e49800ef0136799f26f43e237e8 upstream.
Currently the setting of the 'cpu' member of struct cpuhp_cpu_state in
cpuhp_create() is too late as it is used earlier in _cpu_up().
If kzalloc_node() in __smpboot_create_thread() fails then the rollback will
be done with st->cpu==0 causing CPU0 to be erroneously set to be dying,
causing the scheduler to get mightily confused and throw its toys out of
the pram.
However the cpu number is actually available directly, so simply remove
the 'cpu' member and avoid the problem in the first place.
Fixes:
2ea46c6fc945 ("cpumask/hotplug: Fix cpu_dying() state tracking")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220411152233.474129-2-steven.price@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Roper [Thu, 7 Apr 2022 16:18:39 +0000 (09:18 -0700)]
drm/i915: Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL
commit
1acb34e7dd7720a1fff00cbd4d000ec3219dc9d6 upstream.
The intent of the version check in the mmap ioctl was to maintain
support for existing platforms (i.e., ADL/RPL and earlier), but drop
support on all future igpu platforms. As we've seen on the dgpu side,
the hardware teams are using a more fine-grained numbering system for IP
version numbers these days, so it's possible the version number
associated with our next igpu could be some form of "12.xx" rather than
13 or higher. Comparing against the full ver.release number will ensure
the intent of the check is maintained no matter what numbering the
hardware teams settle on.
Fixes:
d3f3baa3562a ("drm/i915: Reinstate the mmap ioctl for some platforms")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407161839.1073443-1-matthew.d.roper@intel.com
(cherry picked from commit
8e7e5c077cd57ee9a36d58c65f07257dc49a88d5)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Gao [Wed, 13 Apr 2022 06:32:22 +0000 (08:32 +0200)]
dma-direct: avoid redundant memory sync for swiotlb
commit
9e02977bfad006af328add9434c8bffa40e053bb upstream.
When we looked into FIO performance with swiotlb enabled in VM, we found
swiotlb_bounce() is always called one more time than expected for each DMA
read request.
It turns out that the bounce buffer is copied to original DMA buffer twice
after the completion of a DMA request (one is done by in
dma_direct_sync_single_for_cpu(), the other by swiotlb_tbl_unmap_single()).
But the content in bounce buffer actually doesn't change between the two
rounds of copy. So, one round of copy is redundant.
Pass DMA_ATTR_SKIP_CPU_SYNC flag to swiotlb_tbl_unmap_single() to
skip the memory copy in it.
This fix increases FIO 64KB sequential read throughput in a guest with
swiotlb=force by 5.6%.
Fixes:
55897af63091 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code")
Reported-by: Wang Zhaoyang1 <zhaoyang1.wang@intel.com>
Reported-by: Gao Liang <liang.gao@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anna-Maria Behnsen [Tue, 5 Apr 2022 19:17:32 +0000 (21:17 +0200)]
timers: Fix warning condition in __run_timers()
commit
c54bc0fc84214b203f7a0ebfd1bd308ce2abe920 upstream.
When the timer base is empty, base::next_expiry is set to base::clk +
NEXT_TIMER_MAX_DELTA and base::next_expiry_recalc is false. When no timer
is queued until jiffies reaches base::next_expiry value, the warning for
not finding any expired timer and base::next_expiry_recalc is false in
__run_timers() triggers.
To prevent triggering the warning in this valid scenario
base::timers_pending needs to be added to the warning condition.
Fixes:
31cd0e119d50 ("timers: Recalculate next timer interrupt only when necessary")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20220405191732.7438-3-anna-maria@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dongjin Yang [Mon, 4 Apr 2022 02:28:57 +0000 (11:28 +0900)]
dt-bindings: net: snps: remove duplicate name
commit
ce8b3ad1071b764e963d9b08ac34ffddddf12da6 upstream.
snps,dwmac has duplicated name for loongson,ls2k-dwmac and
loongson,ls7a-dwmac.
Signed-off-by: Dongjin Yang <dj76.yang@samsung.com>
Fixes:
68277749a013 ("dt-bindings: dwmac: Add bindings for new Loongson SoC and bridge chip")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220404022857epcms1p6e6af1a6a86569f339e50c318abde7d3c@epcms1p6
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Povišer [Tue, 29 Mar 2022 18:38:17 +0000 (20:38 +0200)]
i2c: pasemi: Wait for write xfers to finish
commit
bd8963e602c77adc76dbbbfc3417c3cf14fed76b upstream.
Wait for completion of write transfers before returning from the driver.
At first sight it may seem advantageous to leave write transfers queued
for the controller to carry out on its own time, but there's a couple of
issues with it:
* Driver doesn't check for FIFO space.
* The queued writes can complete while the driver is in its I2C read
transfer path which means it will get confused by the raising of
XEN (the 'transaction ended' signal). This can cause a spurious
ENODATA error due to premature reading of the MRXFIFO register.
Adding the wait fixes some unreliability issues with the driver. There's
some efficiency cost to it (especially with pasemi_smb_waitready doing
its polling), but that will be alleviated once the driver receives
interrupt support.
Fixes:
beb58aa39e6e ("i2c: PA Semi SMBus driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nadav Amit [Sat, 19 Mar 2022 07:20:15 +0000 (00:20 -0700)]
smp: Fix offline cpu check in flush_smp_call_function_queue()
commit
9e949a3886356fe9112c6f6f34a6e23d1d35407f upstream.
The check in flush_smp_call_function_queue() for callbacks that are sent
to offline CPUs currently checks whether the queue is empty.
However, flush_smp_call_function_queue() has just deleted all the
callbacks from the queue and moved all the entries into a local list.
This checks would only be positive if some callbacks were added in the
short time after llist_del_all() was called. This does not seem to be
the intention of this check.
Change the check to look at the local list to which the entries were
moved instead of the queue from which all the callbacks were just
removed.
Fixes:
8d056c48e4862 ("CPU hotplug, smp: flush any pending IPI callbacks before CPU offline")
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220319072015.1495036-1-namit@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Mon, 11 Apr 2022 18:07:51 +0000 (21:07 +0300)]
i2c: dev: check return value when calling dev_set_name()
commit
993eb48fa199b5f476df8204e652eff63dd19361 upstream.
If dev_set_name() fails, the dev_name() is null, check the return
value of dev_set_name() to avoid the null-ptr-deref.
Fixes:
1413ef638aba ("i2c: dev: Fix the race between the release of i2c_dev and cdev")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Sun, 3 Apr 2022 18:38:22 +0000 (14:38 -0400)]
dm integrity: fix memory corruption when tag_size is less than digest size
commit
08c1af8f1c13bbf210f1760132f4df24d0ed46d6 upstream.
It is possible to set up dm-integrity in such a way that the
"tag_size" parameter is less than the actual digest size. In this
situation, a part of the digest beyond tag_size is ignored.
In this case, dm-integrity would write beyond the end of the
ic->recalc_tags array and corrupt memory. The corruption happened in
integrity_recalc->integrity_sector_checksum->crypto_shash_final.
Fix this corruption by increasing the tags array so that it has enough
padding at the end to accomodate the loop in integrity_recalc() being
able to write a full digest size for the last member of the tags
array.
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Thu, 23 Dec 2021 22:21:41 +0000 (15:21 -0700)]
ARM: davinci: da850-evm: Avoid NULL pointer dereference
commit
83a1cde5c74bfb44b49cb2a940d044bb2380f4ea upstream.
With newer versions of GCC, there is a panic in da850_evm_config_emac()
when booting multi_v5_defconfig in QEMU under the palmetto-bmc machine:
Unable to handle kernel NULL pointer dereference at virtual address
00000020
pgd = (ptrval)
[
00000020] *pgd=
00000000
Internal error: Oops: 5 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0 #1
Hardware name: Generic DT based system
PC is at da850_evm_config_emac+0x1c/0x120
LR is at do_one_initcall+0x50/0x1e0
The emac_pdata pointer in soc_info is NULL because davinci_soc_info only
gets populated on davinci machines but da850_evm_config_emac() is called
on all machines via device_initcall().
Move the rmii_en assignment below the machine check so that it is only
dereferenced when running on a supported SoC.
Fixes:
bae105879f2f ("davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/YcS4xVWs6bQlQSPC@archlinux-ax161/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Gortmaker [Mon, 6 Dec 2021 14:59:50 +0000 (09:59 -0500)]
tick/nohz: Use WARN_ON_ONCE() to prevent console saturation
commit
40e97e42961f8c6cc7bd5fe67cc18417e02d78f1 upstream.
While running some testing on code that happened to allow the variable
tick_nohz_full_running to get set but with no "possible" NOHZ cores to
back up that setting, this warning triggered:
if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE))
WARN_ON(tick_nohz_full_running);
The console was overwhemled with an endless stream of one WARN per tick
per core and there was no way to even see what was going on w/o using a
serial console to capture it and then trace it back to this.
Change it to WARN_ON_ONCE().
Fixes:
08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211206145950.10927-3-paul.gortmaker@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rei Yamamoto [Thu, 31 Mar 2022 00:33:09 +0000 (09:33 +0900)]
genirq/affinity: Consider that CPUs on nodes can be unbalanced
commit
08d835dff916bfe8f45acc7b92c7af6c4081c8a7 upstream.
If CPUs on a node are offline at boot time, the number of nodes is
different when building affinity masks for present cpus and when building
affinity masks for possible cpus. This causes the following problem:
In the case that the number of vectors is less than the number of nodes
there are cases where bits of masks for present cpus are overwritten when
building masks for possible cpus.
Fix this by excluding CPUs, which are not part of the current build mask
(present/possible).
[ tglx: Massaged changelog and added comment ]
Fixes:
b82592199032 ("genirq/affinity: Spread IRQs to all available NUMA nodes")
Signed-off-by: Rei Yamamoto <yamamoto.rei@jp.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220331003309.10891-1-yamamoto.rei@jp.fujitsu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawan Gupta [Thu, 10 Mar 2022 22:02:09 +0000 (14:02 -0800)]
x86/tsx: Disable TSX development mode at boot
commit
400331f8ffa3bec5c561417e5eec6848464e9160 upstream.
A microcode update on some Intel processors causes all TSX transactions
to always abort by default[*]. Microcode also added functionality to
re-enable TSX for development purposes. With this microcode loaded, if
tsx=on was passed on the cmdline, and TSX development mode was already
enabled before the kernel boot, it may make the system vulnerable to TSX
Asynchronous Abort (TAA).
To be on safer side, unconditionally disable TSX development mode during
boot. If a viable use case appears, this can be revisited later.
[*]: Intel TSX Disable Update for Selected Processors, doc ID: 643557
[ bp: Drop unstable web link, massage heavily. ]
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/347bd844da3a333a9793c6687d4e4eb3b2419a3e.1646943780.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawan Gupta [Thu, 10 Mar 2022 22:00:59 +0000 (14:00 -0800)]
x86/tsx: Use MSR_TSX_CTRL to clear CPUID bits
commit
258f3b8c3210b03386e4ad92b4bd8652b5c1beb3 upstream.
tsx_clear_cpuid() uses MSR_TSX_FORCE_ABORT to clear CPUID.RTM and
CPUID.HLE. Not all CPUs support MSR_TSX_FORCE_ABORT, alternatively use
MSR_IA32_TSX_CTRL when supported.
[ bp: Document how and why TSX gets disabled. ]
Fixes:
293649307ef9 ("x86/tsx: Clear CPUID bits when TSX always force aborts")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5b323e77e251a9c8bcdda498c5cc0095be1e1d3c.1646943780.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomasz Moń [Wed, 6 Apr 2022 19:49:21 +0000 (21:49 +0200)]
drm/amdgpu: Enable gfxoff quirk on MacBook Pro
commit
4593c1b6d159f1e5c35c07a7f125e79e5a864302 upstream.
Enabling gfxoff quirk results in perfectly usable graphical user
interface on MacBook Pro (15-inch, 2019) with Radeon Pro Vega 20 4 GB.
Without the quirk, X server is completely unusable as every few seconds
there is gpu reset due to ring gfx timeout.
Signed-off-by: Tomasz Moń <desowin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Melissa Wen [Tue, 29 Mar 2022 20:18:35 +0000 (19:18 -0100)]
drm/amd/display: don't ignore alpha property on pre-multiplied mode
commit
e4f1541caf60fcbe5a59e9d25805c0b5865e546a upstream.
"Pre-multiplied" is the default pixel blend mode for KMS/DRM, as
documented in supported_modes of drm_plane_create_blend_mode_property():
https://cgit.freedesktop.org/drm/drm-misc/tree/drivers/gpu/drm/drm_blend.c
In this mode, both 'pixel alpha' and 'plane alpha' participate in the
calculation, as described by the pixel blend mode formula in KMS/DRM
documentation:
out.rgb = plane_alpha * fg.rgb +
(1 - (plane_alpha * fg.alpha)) * bg.rgb
Considering the blend config mechanisms we have in the driver so far,
the alpha mode that better fits this blend mode is the
_PER_PIXEL_ALPHA_COMBINED_GLOBAL_GAIN, where the value for global_gain
is the plane alpha (global_alpha).
With this change, alpha property stops to be ignored. It also addresses
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1734
v2:
* keep the 8-bit value for global_alpha_value (Nicholas)
* correct the logical ordering for combined global gain (Nicholas)
* apply to dcn10 too (Nicholas)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Dichtel [Fri, 8 Apr 2022 14:03:42 +0000 (16:03 +0200)]
ipv6: fix panic when forwarding a pkt with no in6 dev
commit
e3fa461d8b0e185b7da8a101fe94dfe6dd500ac0 upstream.
kongweibin reported a kernel panic in ip6_forward() when input interface
has no in6 dev associated.
The following tc commands were used to reproduce this panic:
tc qdisc del dev vxlan100 root
tc qdisc add dev vxlan100 root netem corrupt 5%
CC: stable@vger.kernel.org
Fixes:
ccd27f05ae7b ("ipv6: fix 'disable_policy' for fwd packets")
Reported-by: kongweibin <kongweibin2@huawei.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Mon, 11 Apr 2022 09:42:03 +0000 (11:42 +0200)]
nl80211: correctly check NL80211_ATTR_REG_ALPHA2 size
commit
6624bb34b4eb19f715db9908cca00122748765d7 upstream.
We need this to be at least two bytes, so we can access
alpha2[0] and alpha2[1]. It may be three in case some
userspace used NUL-termination since it was NLA_STRING
(and we also push it out with NUL-termination).
Cc: stable@vger.kernel.org
Reported-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220411114201.fd4a31f06541.Ie7ff4be2cf348d8cc28ed0d626fc54becf7ea799@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio M. De Francesco [Sat, 9 Apr 2022 01:26:55 +0000 (03:26 +0200)]
ALSA: pcm: Test for "silence" field in struct "pcm_format_data"
commit
2f7a26abb8241a0208c68d22815aa247c5ddacab upstream.
Syzbot reports "KASAN: null-ptr-deref Write in
snd_pcm_format_set_silence".[1]
It is due to missing validation of the "silence" field of struct
"pcm_format_data" in "pcm_formats" array.
Add a test for valid "pat" and, if it is not so, return -EINVAL.
[1] https://lore.kernel.org/lkml/
000000000000d188ef05dc2c7279@google.com/
Reported-and-tested-by: syzbot+205eb15961852c2c5974@syzkaller.appspotmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220409012655.9399-1-fmdefrancesco@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tao Jin [Sat, 9 Apr 2022 22:44:24 +0000 (18:44 -0400)]
ALSA: hda/realtek: add quirk for Lenovo Thinkpad X12 speakers
commit
264fb03497ec1c7841bba872571bcd11beed57a7 upstream.
For this specific device on Lenovo Thinkpad X12 tablet, the verbs were
dumped by qemu running a guest OS that init this codec properly.
After studying the dump, it turns out that
the same quirk used by the other Lenovo devices can be reused.
The patch was tested working against the mainline kernel.
Cc: <stable@vger.kernel.org>
Signed-off-by: Tao Jin <tao-j@outlook.com>
Link: https://lore.kernel.org/r/CO6PR03MB6241CD73310B37858FE64C85E1E89@CO6PR03MB6241.namprd03.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Crawford [Tue, 5 Apr 2022 18:20:29 +0000 (12:20 -0600)]
ALSA: hda/realtek: Add quirk for Clevo PD50PNT
commit
9eb6f5c388060d8cef3c8b616cc31b765e022359 upstream.
Fixes speaker output and headset detection on Clevo PD50PNT.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220405182029.27431-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Naohiro Aota [Tue, 29 Mar 2022 06:55:58 +0000 (15:55 +0900)]
btrfs: mark resumed async balance as writing
commit
a690e5f2db4d1dca742ce734aaff9f3112d63764 upstream.
When btrfs balance is interrupted with umount, the background balance
resumes on the next mount. There is a potential deadlock with FS freezing
here like as described in commit
26559780b953 ("btrfs: zoned: mark
relocation as writing"). Mark the process as sb_writing to avoid it.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jia-Ju Bai [Thu, 24 Mar 2022 13:44:54 +0000 (06:44 -0700)]
btrfs: fix root ref counts in error handling in btrfs_get_root_ref
commit
168a2f776b9762f4021421008512dd7ab7474df1 upstream.
In btrfs_get_root_ref(), when btrfs_insert_fs_root() fails,
btrfs_put_root() can happen for two reasons:
- the root already exists in the tree, in that case it returns the
reference obtained in btrfs_lookup_fs_root()
- another error so the cleanup is done in the fail label
Calling btrfs_put_root() unconditionally would lead to double decrement
of the root reference possibly freeing it in the second case.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Fixes:
bc44d7c4b2b1 ("btrfs: push btrfs_grab_fs_root into btrfs_get_fs_root")
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Toke Høiland-Jørgensen [Mon, 4 Apr 2022 20:48:00 +0000 (22:48 +0200)]
ath9k: Fix usage of driver-private space in tx_info
commit
5a6b06f5927c940fa44026695779c30b7536474c upstream.
The ieee80211_tx_info_clear_status() helper also clears the rate counts and
the driver-private part of struct ieee80211_tx_info, so using it breaks
quite a few other things. So back out of using it, and instead define a
ath-internal helper that only clears the area between the
status_driver_data and the rates info. Combined with moving the
ath_frame_info struct to status_driver_data, this avoids clearing anything
we shouldn't be, and so we can keep the existing code for handling the rate
information.
While fixing this I also noticed that the setting of
tx_info->status.rates[tx_rateindex].count on hardware underrun errors was
always immediately overridden by the normal setting of the same fields, so
rearrange the code so that the underrun detection actually takes effect.
The new helper could be generalised to a 'memset_between()' helper, but
leave it as a driver-internal helper for now since this needs to go to
stable.
Cc: stable@vger.kernel.org
Reported-by: Peter Seiderer <ps.report@gmx.net>
Fixes:
037250f0a45c ("ath9k: Properly clear TX status area before reporting to mac80211")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220404204800.2681133-1-toke@toke.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Toke Høiland-Jørgensen [Wed, 30 Mar 2022 16:44:09 +0000 (18:44 +0200)]
ath9k: Properly clear TX status area before reporting to mac80211
commit
037250f0a45cf9ecf5b52d4b9ff8eadeb609c800 upstream.
The ath9k driver was not properly clearing the status area in the
ieee80211_tx_info struct before reporting TX status to mac80211. Instead,
it was manually filling in fields, which meant that fields introduced later
were left as-is.
Conveniently, mac80211 actually provides a helper to zero out the status
area, so use that to make sure we zero everything.
The last commit touching the driver function writing the status information
seems to have actually been fixing an issue that was also caused by the
area being uninitialised; but it only added clearing of a single field
instead of the whole struct. That is now redundant, though, so revert that
commit and use it as a convenient Fixes tag.
Fixes:
cc591d77aba1 ("ath9k: Make sure to zero status.tx_time before reporting TX status")
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220330164409.16645-1-toke@toke.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ronnie Sahlberg [Wed, 13 Apr 2022 00:02:17 +0000 (10:02 +1000)]
cifs: verify that tcon is valid before dereference in cifs_kill_sb
commit
8b6c58458ee3206dde345fce327a4cb83e69caf9 upstream.
On umount, cifs_sb->tlink_tree might contain entries that do not represent
a valid tcon.
Check the tcon for error before we dereference it.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason A. Donenfeld [Tue, 5 Apr 2022 22:28:15 +0000 (00:28 +0200)]
gcc-plugins: latent_entropy: use /dev/urandom
commit
c40160f2998c897231f8454bf797558d30a20375 upstream.
While the latent entropy plugin mostly doesn't derive entropy from
get_random_const() for measuring the call graph, when __latent_entropy is
applied to a constant, then it's initialized statically to output from
get_random_const(). In that case, this data is derived from a 64-bit
seed, which means a buffer of 512 bits doesn't really have that amount
of compile-time entropy.
This patch fixes that shortcoming by just buffering chunks of
/dev/urandom output and doling it out as requested.
At the same time, it's important that we don't break the use of
-frandom-seed, for people who want the runtime benefits of the latent
entropy plugin, while still having compile-time determinism. In that
case, we detect whether gcc's set_random_seed() has been called by
making a call to get_random_seed(noinit=true) in the plugin init
function, which is called after set_random_seed() is called but before
anything that calls get_random_seed(noinit=false), and seeing if it's
zero or not. If it's not zero, we're in deterministic mode, and so we
just generate numbers with a basic xorshift prng.
Note that we don't detect if -frandom-seed is being used using the
documented local_tick variable, because it's assigned via:
local_tick = (unsigned) tv.tv_sec * 1000 + tv.tv_usec / 1000;
which may well overflow and become -1 on its own, and so isn't
reliable: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105171
[kees: The 256 byte rnd_buf size was chosen based on average (250),
median (64), and std deviation (575) bytes of used entropy for a
defconfig x86_64 build]
Fixes:
38addce8b600 ("gcc-plugins: Add latent_entropy plugin")
Cc: stable@vger.kernel.org
Cc: PaX Team <pageexec@freemail.hu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220405222815.21155-1-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 3 Mar 2022 18:06:32 +0000 (19:06 +0100)]
memory: renesas-rpc-if: fix platform-device leak in error path
commit
b452dbf24d7d9a990d70118462925f6ee287d135 upstream.
Make sure to free the flash platform device in the event that
registration fails during probe.
Fixes:
ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Cc: stable@vger.kernel.org # 5.8
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220303180632.3194-1-johan@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Fri, 1 Apr 2022 21:08:21 +0000 (17:08 -0400)]
SUNRPC: Fix NFSD's request deferral on RDMA transports
commit
773f91b2cf3f52df0d7508fdbf60f37567cdaee4 upstream.
Trond Myklebust reports an NFSD crash in svc_rdma_sendto(). Further
investigation shows that the crash occurred while NFSD was handling
a deferred request.
This patch addresses two inter-related issues that prevent request
deferral from working correctly for RPC/RDMA requests:
1. Prevent the crash by ensuring that the original
svc_rqst::rq_xprt_ctxt value is available when the request is
revisited. Otherwise svc_rdma_sendto() does not have a Receive
context available with which to construct its reply.
2. Possibly since before commit
71641d99ce03 ("svcrdma: Properly
compute .len and .buflen for received RPC Calls"),
svc_rdma_recvfrom() did not include the transport header in the
returned xdr_buf. There should have been no need for svc_defer()
and friends to save and restore that header, as of that commit.
This issue is addressed in a backport-friendly way by simply
having svc_rdma_recvfrom() set rq_xprt_hlen to zero
unconditionally, just as svc_tcp_recvfrom() does. This enables
svc_deferred_recv() to correctly reconstruct an RPC message
received via RPC/RDMA.
Reported-by: Trond Myklebust <trondmy@hammerspace.com>
Link: https://lore.kernel.org/linux-nfs/82662b7190f26fb304eb0ab1bb04279072439d4e.camel@hammerspace.com/
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Thu, 31 Mar 2022 22:13:59 +0000 (22:13 +0000)]
KVM: x86/mmu: Resolve nx_huge_pages when kvm.ko is loaded
commit
1d0e84806047f38027d7572adb4702ef7c09b317 upstream.
Resolve nx_huge_pages to true/false when kvm.ko is loaded, leaving it as
-1 is technically undefined behavior when its value is read out by
param_get_bool(), as boolean values are supposed to be '0' or '1'.
Alternatively, KVM could define a custom getter for the param, but the
auto value doesn't depend on the vendor module in any way, and printing
"auto" would be unnecessarily unfriendly to the user.
In addition to fixing the undefined behavior, resolving the auto value
also fixes the scenario where the auto value resolves to N and no vendor
module is loaded. Previously, -1 would result in Y being printed even
though KVM would ultimately disable the mitigation.
Rename the existing MMU module init/exit helpers to clarify that they're
invoked with respect to the vendor module, and add comments to document
why KVM has two separate "module init" flows.
=========================================================================
UBSAN: invalid-load in kernel/params.c:320:33
load of value 255 is not a valid value for type '_Bool'
CPU: 6 PID: 892 Comm: tail Not tainted 5.17.0-rc3+ #799
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
ubsan_epilogue+0x5/0x40
__ubsan_handle_load_invalid_value.cold+0x43/0x48
param_get_bool.cold+0xf/0x14
param_attr_show+0x55/0x80
module_attr_show+0x1c/0x30
sysfs_kf_seq_show+0x93/0xc0
seq_read_iter+0x11c/0x450
new_sync_read+0x11b/0x1a0
vfs_read+0xf0/0x190
ksys_read+0x5f/0xe0
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
=========================================================================
Fixes:
b8e8c8303ff2 ("kvm: mmu: ITLB_MULTIHIT mitigation")
Cc: stable@vger.kernel.org
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220331221359.3912754-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patrick Wang [Fri, 15 Apr 2022 02:14:04 +0000 (19:14 -0700)]
mm: kmemleak: take a full lowmem check in kmemleak_*_phys()
commit
23c2d497de21f25898fbea70aeb292ab8acc8c94 upstream.
The kmemleak_*_phys() apis do not check the address for lowmem's min
boundary, while the caller may pass an address below lowmem, which will
trigger an oops:
# echo scan > /sys/kernel/debug/kmemleak
Unable to handle kernel paging request at virtual address
ff5fffffffe00000
Oops [#1]
Modules linked in:
CPU: 2 PID: 134 Comm: bash Not tainted 5.18.0-rc1-next-
20220407 #33
Hardware name: riscv-virtio,qemu (DT)
epc : scan_block+0x74/0x15c
ra : scan_block+0x72/0x15c
epc :
ffffffff801e5806 ra :
ffffffff801e5804 sp :
ff200000104abc30
gp :
ffffffff815cd4e8 tp :
ff60000004cfa340 t0 :
0000000000000200
t1 :
00aaaaaac23954cc t2 :
00000000000003ff s0 :
ff200000104abc90
s1 :
ffffffff81b0ff28 a0 :
0000000000000000 a1 :
ff5fffffffe01000
a2 :
ffffffff81b0ff28 a3 :
0000000000000002 a4 :
0000000000000001
a5 :
0000000000000000 a6 :
ff200000104abd7c a7 :
0000000000000005
s2 :
ff5fffffffe00ff9 s3 :
ffffffff815cd998 s4 :
ffffffff815d0e90
s5 :
ffffffff81b0ff28 s6 :
0000000000000020 s7 :
ffffffff815d0eb0
s8 :
ffffffffffffffff s9 :
ff5fffffffe00000 s10:
ff5fffffffe01000
s11:
0000000000000022 t3 :
00ffffffaa17db4c t4 :
000000000000000f
t5 :
0000000000000001 t6 :
0000000000000000
status:
0000000000000100 badaddr:
ff5fffffffe00000 cause:
000000000000000d
scan_gray_list+0x12e/0x1a6
kmemleak_scan+0x2aa/0x57e
kmemleak_write+0x32a/0x40c
full_proxy_write+0x56/0x82
vfs_write+0xa6/0x2a6
ksys_write+0x6c/0xe2
sys_write+0x22/0x2a
ret_from_syscall+0x0/0x2
The callers may not quite know the actual address they pass(e.g. from
devicetree). So the kmemleak_*_phys() apis should guarantee the address
they finally use is in lowmem range, so check the address for lowmem's
min boundary.
Link: https://lkml.kernel.org/r/20220413122925.33856-1-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minchan Kim [Fri, 15 Apr 2022 02:13:46 +0000 (19:13 -0700)]
mm: fix unexpected zeroed page mapping with zram swap
commit
e914d8f00391520ecc4495dd0ca0124538ab7119 upstream.
Two processes under CLONE_VM cloning, user process can be corrupted by
seeing zeroed page unexpectedly.
CPU A CPU B
do_swap_page do_swap_page
SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path
swap_readpage valid data
swap_slot_free_notify
delete zram entry
swap_readpage zeroed(invalid) data
pte_lock
map the *zero data* to userspace
pte_unlock
pte_lock
if (!pte_same)
goto out_nomap;
pte_unlock
return and next refault will
read zeroed data
The swap_slot_free_notify is bogus for CLONE_VM case since it doesn't
increase the refcount of swap slot at copy_mm so it couldn't catch up
whether it's safe or not to discard data from backing device. In the
case, only the lock it could rely on to synchronize swap slot freeing is
page table lock. Thus, this patch gets rid of the swap_slot_free_notify
function. With this patch, CPU A will see correct data.
CPU A CPU B
do_swap_page do_swap_page
SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path
swap_readpage original data
pte_lock
map the original data
swap_free
swap_range_free
bd_disk->fops->swap_slot_free_notify
swap_readpage read zeroed data
pte_unlock
pte_lock
if (!pte_same)
goto out_nomap;
pte_unlock
return
on next refault will see mapped data by CPU B
The concern of the patch would increase memory consumption since it
could keep wasted memory with compressed form in zram as well as
uncompressed form in address space. However, most of cases of zram uses
no readahead and do_swap_page is followed by swap_free so it will free
the compressed form from in zram quickly.
Link: https://lkml.kernel.org/r/YjTVVxIAsnKAXjTd@google.com
Fixes:
0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device")
Reported-by: Ivan Babrou <ivan@cloudflare.com>
Tested-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Juergen Gross [Fri, 15 Apr 2022 02:13:43 +0000 (19:13 -0700)]
mm, page_alloc: fix build_zonerefs_node()
commit
e553f62f10d93551eb883eca227ac54d1a4fad84 upstream.
Since commit
6aa303defb74 ("mm, vmscan: only allocate and reclaim from
zones with pages managed by the buddy allocator") only zones with free
memory are included in a built zonelist. This is problematic when e.g.
all memory of a zone has been ballooned out when zonelists are being
rebuilt.
The decision whether to rebuild the zonelists when onlining new memory
is done based on populated_zone() returning 0 for the zone the memory
will be added to. The new zone is added to the zonelists only, if it
has free memory pages (managed_zone() returns a non-zero value) after
the memory has been onlined. This implies, that onlining memory will
always free the added pages to the allocator immediately, but this is
not true in all cases: when e.g. running as a Xen guest the onlined new
memory will be added only to the ballooned memory list, it will be freed
only when the guest is being ballooned up afterwards.
Another problem with using managed_zone() for the decision whether a
zone is being added to the zonelists is, that a zone with all memory
used will in fact be removed from all zonelists in case the zonelists
happen to be rebuilt.
Use populated_zone() when building a zonelist as it has been done before
that commit.
There was a report that QubesOS (based on Xen) is hitting this problem.
Xen has switched to use the zone device functionality in kernel 5.9 and
QubesOS wants to use memory hotplugging for guests in order to be able
to start a guest with minimal memory and expand it as needed. This was
the report leading to the patch.
Link: https://lkml.kernel.org/r/20220407120637.9035-1-jgross@suse.com
Fixes:
6aa303defb74 ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Axel Rasmussen [Fri, 15 Apr 2022 02:13:31 +0000 (19:13 -0700)]
mm/secretmem: fix panic when growing a memfd_secret
commit
f9b141f93659e09a52e28791ccbaf69c273b8e92 upstream.
When one tries to grow an existing memfd_secret with ftruncate, one gets
a panic [1]. For example, doing the following reliably induces the
panic:
fd = memfd_secret();
ftruncate(fd, 10);
ptr = mmap(NULL, 10, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
strcpy(ptr, "
123456789");
munmap(ptr, 10);
ftruncate(fd, 20);
The basic reason for this is, when we grow with ftruncate, we call down
into simple_setattr, and then truncate_inode_pages_range, and eventually
we try to zero part of the memory. The normal truncation code does this
via the direct map (i.e., it calls page_address() and hands that to
memset()).
For memfd_secret though, we specifically don't map our pages via the
direct map (i.e. we call set_direct_map_invalid_noflush() on every
fault). So the address returned by page_address() isn't useful, and
when we try to memset() with it we panic.
This patch avoids the panic by implementing a custom setattr for
memfd_secret, which detects resizes specifically (setting the size for
the first time works just fine, since there are no existing pages to try
to zero), and rejects them with EINVAL.
One could argue growing should be supported, but I think that will
require a significantly more lengthy change. So, I propose a minimal
fix for the benefit of stable kernels, and then perhaps to extend
memfd_secret to support growing in a separate patch.
[1]:
BUG: unable to handle page fault for address:
ffffa0a889277028
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD
afa01067 P4D
afa01067 PUD
83f909067 PMD
83f8bf067 PTE
800ffffef6d88060
Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
CPU: 0 PID: 281 Comm: repro Not tainted 5.17.0-dbg-DEV #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:memset_erms+0x9/0x10
Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01
RSP: 0018:
ffffb932c09afbf0 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
ffffda63c4249dc0 RCX:
0000000000000fd8
RDX:
0000000000000fd8 RSI:
0000000000000000 RDI:
ffffa0a889277028
RBP:
ffffb932c09afc00 R08:
0000000000001000 R09:
ffffa0a889277028
R10:
0000000000020023 R11:
0000000000000000 R12:
ffffda63c4249dc0
R13:
ffffa0a890d70d98 R14:
0000000000000028 R15:
0000000000000fd8
FS:
00007f7294899580(0000) GS:
ffffa0af9bc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffa0a889277028 CR3:
0000000107ef6006 CR4:
0000000000370ef0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
? zero_user_segments+0x82/0x190
truncate_inode_partial_folio+0xd4/0x2a0
truncate_inode_pages_range+0x380/0x830
truncate_setsize+0x63/0x80
simple_setattr+0x37/0x60
notify_change+0x3d8/0x4d0
do_sys_ftruncate+0x162/0x1d0
__x64_sys_ftruncate+0x1c/0x20
do_syscall_64+0x44/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Modules linked in: xhci_pci xhci_hcd virtio_net net_failover failover virtio_blk virtio_balloon uhci_hcd ohci_pci ohci_hcd evdev ehci_pci ehci_hcd 9pnet_virtio 9p netfs 9pnet
CR2:
ffffa0a889277028
[lkp@intel.com: secretmem_iops can be static]
Signed-off-by: kernel test robot <lkp@intel.com>
[axelrasmussen@google.com: return EINVAL]
Link: https://lkml.kernel.org/r/20220324210909.1843814-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20220412193023.279320-1-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Tue, 5 Apr 2022 15:15:15 +0000 (17:15 +0200)]
perf/imx_ddr: Fix undefined behavior due to shift overflowing the constant
[ Upstream commit
d02b4dd84e1a90f7f1444d027c0289bf355b0d5a ]
Fix:
In file included from <command-line>:0:0:
In function ‘ddr_perf_counter_enable’,
inlined from ‘ddr_perf_irq_handler’ at drivers/perf/fsl_imx8_ddr_perf.c:651:2:
././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_729’ \
declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
...
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Frank Li <Frank.li@nxp.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220405151517.29753-10-bp@alien8.de
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Begunkov [Thu, 7 Apr 2022 13:05:05 +0000 (14:05 +0100)]
io_uring: use nospec annotation for more indexes
[ Upstream commit
4cdd158be9d09223737df83136a1fb65269d809a ]
There are still several places that using pre array_index_nospec()
indexes, fix them up.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b01ef5ee83f72ed35ad525912370b729f5d145f4.1649336342.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Begunkov [Thu, 7 Apr 2022 13:05:04 +0000 (14:05 +0100)]
io_uring: zero tag on rsrc removal
[ Upstream commit
8f0a24801bb44aa58496945aabb904c729176772 ]
Automatically default rsrc tag in io_queue_rsrc_removal(), it's safer
than leaving it there and relying on the rest of the code to behave and
not use it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1cf262a50df17478ea25b22494dcc19f3a80301f.1649336342.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Duoming Zhou [Tue, 5 Apr 2022 13:22:06 +0000 (21:22 +0800)]
drivers: net: slip: fix NPD bug in sl_tx_timeout()
[ Upstream commit
ec4eb8a86ade4d22633e1da2a7d85a846b7d1798 ]
When a slip driver is detaching, the slip_close() will act to
cleanup necessary resources and sl->tty is set to NULL in
slip_close(). Meanwhile, the packet we transmit is blocked,
sl_tx_timeout() will be called. Although slip_close() and
sl_tx_timeout() use sl->lock to synchronize, we don`t judge
whether sl->tty equals to NULL in sl_tx_timeout() and the
null pointer dereference bug will happen.
(Thread 1) | (Thread 2)
| slip_close()
| spin_lock_bh(&sl->lock)
| ...
... | sl->tty = NULL //(1)
sl_tx_timeout() | spin_unlock_bh(&sl->lock)
spin_lock(&sl->lock); |
... | ...
tty_chars_in_buffer(sl->tty)|
if (tty->ops->..) //(2) |
... | synchronize_rcu()
We set NULL to sl->tty in position (1) and dereference sl->tty
in position (2).
This patch adds check in sl_tx_timeout(). If sl->tty equals to
NULL, sl_tx_timeout() will goto out.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20220405132206.55291-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chandrakanth patil [Thu, 24 Mar 2022 09:47:11 +0000 (02:47 -0700)]
scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan
[ Upstream commit
56495f295d8e021f77d065b890fc0100e3f9f6d8 ]
The megaraid_sas driver supports single LUN for RAID devices. That is LUN
0. All other LUNs are unsupported. When a device scan on a logical target
with invalid LUN number is invoked through sysfs, that target ends up
getting removed.
Add LUN ID validation in the slave destroy function to avoid the target
deletion.
Link: https://lore.kernel.org/r/20220324094711.48833-1-chandrakanth.patil@broadcom.com
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Galakhov [Wed, 9 Mar 2022 21:25:35 +0000 (22:25 +0100)]
scsi: mvsas: Add PCI ID of RocketRaid 2640
[ Upstream commit
5f2bce1e222028dc1c15f130109a17aa654ae6e8 ]
The HighPoint RocketRaid 2640 is a low-cost SAS controller based on Marvell
chip. The chip in question was already supported by the kernel, just the
PCI ID of this particular board was missing.
Link: https://lore.kernel.org/r/20220309212535.402987-1-agalakhov@gmail.com
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sreekanth Reddy [Tue, 5 Apr 2022 12:06:37 +0000 (17:36 +0530)]
scsi: mpt3sas: Fail reset operation if config request timed out
[ Upstream commit
f61eb1216c959f93ffabd3b8781fa5b2b22f8907 ]
As part of controller reset operation the driver issues a config request
command. If this command gets times out, then fail the controller reset
operation instead of retrying it.
Link: https://lore.kernel.org/r/20220405120637.20528-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Böhmwalder [Wed, 6 Apr 2022 19:04:45 +0000 (21:04 +0200)]
drbd: set QUEUE_FLAG_STABLE_WRITES
[ Upstream commit
286901941fd18a52b2138fddbbf589ad3639eb00 ]
We want our pages not to change while they are being written.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roman Li [Thu, 17 Mar 2022 23:55:05 +0000 (19:55 -0400)]
drm/amd/display: Fix allocate_mst_payload assert on resume
[ Upstream commit
f4346fb3edf7720db3f7f5e1cab1f667cd024280 ]
[Why]
On resume we do link detection for all non-MST connectors.
MST is handled separately. However the condition for telling
if connector is on mst branch is not enough for mst hub case.
Link detection for mst branch link leads to mst topology reset.
That causes assert in dc_link_allocate_mst_payload()
[How]
Use link type as indicator for mst link.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Leung [Fri, 18 Mar 2022 15:12:36 +0000 (11:12 -0400)]
drm/amd/display: Revert FEC check in validation
[ Upstream commit
b2075fce104b88b789c15ef1ed2b91dc94198e26 ]
why and how:
causes failure on install on certain machines
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roman Li [Tue, 15 Mar 2022 20:31:14 +0000 (16:31 -0400)]
drm/amd/display: Enable power gating before init_pipes
[ Upstream commit
58e16c752e9540b28a873c44c3bee83e022007c1 ]
[Why]
In init_hw() we call init_pipes() before enabling power gating.
init_pipes() tries to power gate dsc but it may fail because
required force-ons are not released yet.
As a result with dsc config the following errors observed on resume:
"REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control"
[How]
Move enable_power_gating_plane() before init_pipes() in init_hw()
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matthias Schiffer [Thu, 31 Mar 2022 11:08:19 +0000 (13:08 +0200)]
spi: cadence-quadspi: fix protocol setup for non-1-1-X operations
[ Upstream commit
97e4827d775faa9a32b5e1a97959c69dd77d17a3 ]
cqspi_set_protocol() only set the data width, but ignored the command
and address width (except for 8-8-8 DTR ops), leading to corruption of
all transfers using 1-X-X or X-X-X ops. Fix by setting the other two
widths as well.
While we're at it, simplify the code a bit by replacing the
CQSPI_INST_TYPE_* constants with ilog2().
Tested on a TI AM64x with a Macronix MX25U51245G QSPI flash with 1-4-4
read and write operations.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220331110819.133392-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaomeng Tong [Wed, 6 Apr 2022 03:55:56 +0000 (11:55 +0800)]
myri10ge: fix an incorrect free for skb in myri10ge_sw_tso
[ Upstream commit
b423e54ba965b4469b48e46fd16941f1e1701697 ]
All remaining skbs should be released when myri10ge_xmit fails to
transmit a packet. Fix it within another skb_list_walk_safe.
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marcin Kozlowski [Wed, 6 Apr 2022 08:05:37 +0000 (10:05 +0200)]
net: usb: aqc111: Fix out-of-bounds accesses in RX fixup
[ Upstream commit
afb8e246527536848b9b4025b40e613edf776a9d ]
aqc111_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:
- The metadata array (desc_offset..desc_offset+2*pkt_count) can be out of bounds,
causing OOB reads and (on big-endian systems) OOB endianness flips.
- A packet can overlap the metadata array, causing a later OOB
endianness flip to corrupt data used by a cloned SKB that has already
been handed off into the network stack.
- A packet SKB can be constructed whose tail is far beyond its end,
causing out-of-bounds heap data to be considered part of the SKB's
data.
Found doing variant analysis. Tested it with another driver (ax88179_178a), since
I don't have a aqc111 device to test it, but the code looks very similar.
Signed-off-by: Marcin Kozlowski <marcinguy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Boqun Feng [Fri, 25 Mar 2022 02:32:12 +0000 (10:32 +0800)]
Drivers: hv: balloon: Disable balloon and hot-add accordingly
[ Upstream commit
be5802795cf8d0b881745fa9ba7790293b382280 ]
Currently there are known potential issues for balloon and hot-add on
ARM64:
* Unballoon requests from Hyper-V should only unballoon ranges
that are guest page size aligned, otherwise guests cannot handle
because it's impossible to partially free a page. This is a
problem when guest page size > 4096 bytes.
* Memory hot-add requests from Hyper-V should provide the NUMA
node id of the added ranges or ARM64 should have a functional
memory_add_physaddr_to_nid(), otherwise the node id is missing
for add_memory().
These issues require discussions on design and implementation. In the
meanwhile, post_status() is working and essential to guest monitoring.
Therefore instead of disabling the entire hv_balloon driver, the
ballooning (when page size > 4096 bytes) and hot-add are disabled
accordingly for now. Once the issues are fixed, they can be re-enable in
these cases.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220325023212.1570049-3-boqun.feng@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Chiu [Tue, 5 Apr 2022 09:19:26 +0000 (17:19 +0800)]
net: axienet: setup mdio unconditionally
[ Upstream commit
d1c4f93e3f0a023024a6f022a61528c06cf1daa9 ]
The call to axienet_mdio_setup should not depend on whether "phy-node"
pressents on the DT. Besides, since `lp->phy_node` is used if PHY is in
SGMII or 100Base-X modes, move it into the if statement. And the next patch
will remove `lp->phy_node` from driver's private structure and do an
of_node_put on it right away after use since it is not used elsewhere.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steve Capper [Wed, 30 Mar 2022 11:25:43 +0000 (12:25 +0100)]
tlb: hugetlb: Add more sizes to tlb_remove_huge_tlb_entry
[ Upstream commit
697a1d44af8ba0477ee729e632f4ade37999249a ]
tlb_remove_huge_tlb_entry only considers PMD_SIZE and PUD_SIZE when
updating the mmu_gather structure.
Unfortunately on arm64 there are two additional huge page sizes that
need to be covered: CONT_PTE_SIZE and CONT_PMD_SIZE. Where an end-user
attempts to employ contiguous huge pages, a VM_BUG_ON can be experienced
due to the fact that the tlb structure hasn't been correctly updated by
the relevant tlb_flush_p.._range() call from tlb_remove_huge_tlb_entry.
This patch adds inequality logic to the generic implementation of
tlb_remove_huge_tlb_entry s.t. CONT_PTE_SIZE and CONT_PMD_SIZE are
effectively covered on arm64. Also, as well as ptes, pmds and puds;
p4ds are now considered too.
Reported-by: David Hildenbrand <david@redhat.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/linux-mm/811c5c8e-b3a2-85d2-049c-717f17c3a03a@redhat.com/
Signed-off-by: Steve Capper <steve.capper@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220330112543.863-1-steve.capper@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joey Gouly [Tue, 5 Apr 2022 10:47:33 +0000 (11:47 +0100)]
arm64: alternatives: mark patch_alternative() as `noinstr`
[ Upstream commit
a2c0b0fbe01419f8f5d1c0b9c581631f34ffce8b ]
The alternatives code must be `noinstr` such that it does not patch itself,
as the cache invalidation is only performed after all the alternatives have
been applied.
Mark patch_alternative() as `noinstr`. Mark branch_insn_requires_update()
and get_alt_insn() with `__always_inline` since they are both only called
through patch_alternative().
Booting a kernel in QEMU TCG with KCSAN=y and ARM64_USE_LSE_ATOMICS=y caused
a boot hang:
[ 0.241121] CPU: All CPU(s) started at EL2
The alternatives code was patching the atomics in __tsan_read4() from LL/SC
atomics to LSE atomics.
The following fragment is using LL/SC atomics in the .text section:
| <__tsan_unaligned_read4+304>: ldxr x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This LL/SC atomic sequence was to be replaced with LSE atomics. However since
the alternatives code was instrumentable, __tsan_read4() was being called after
only the first instruction was replaced, which led to the following code in memory:
| <__tsan_unaligned_read4+304>: ldadd x5, x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This caused an infinite loop as the `stxr` instruction never completed successfully,
so `w7` was always 0.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220405104733.11476-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Bakker [Mon, 28 Mar 2022 01:01:54 +0000 (18:01 -0700)]
regulator: wm8994: Add an off-on delay for WM8994 variant
[ Upstream commit
92d96b603738ec4f35cde7198c303ae264dd47cb ]
As per Table 130 of the wm8994 datasheet at [1], there is an off-on
delay for LDO1 and LDO2. In the wm8958 datasheet [2], I could not
find any reference to it. I could not find a wm1811 datasheet to
double-check there, but as no one has complained presumably it works
without it.
This solves the issue on Samsung Aries boards with a wm8994 where
register writes fail when the device is powered off and back-on
quickly.
[1] https://statics.cirrus.com/pubs/proDatasheet/WM8994_Rev4.6.pdf
[2] https://statics.cirrus.com/pubs/proDatasheet/WM8958_v3.5.pdf
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/CY4PR04MB056771CFB80DC447C30D5A31CB1D9@CY4PR04MB0567.namprd04.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leo Ruan [Mon, 7 Feb 2022 15:14:11 +0000 (16:14 +0100)]
gpu: ipu-v3: Fix dev_dbg frequency output
[ Upstream commit
070a88fd4a03f921b73a2059e97d55faaa447dab ]
This commit corrects the printing of the IPU clock error percentage if
it is between -0.1% to -0.9%. For example, if the pixel clock requested
is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%.
But the fixed point math had a flaw and calculated error of 0.2%.
Before:
Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz
IPU clock can give
27000000 with divider 10, error 0.2%
Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
After:
Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz
IPU clock can give
27000000 with divider 10, error -0.8%
Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220207151411.5009-1-mark.jonas@de.bosch.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian Lamparter [Sat, 19 Mar 2022 20:11:03 +0000 (21:11 +0100)]
ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOs
[ Upstream commit
5399752299396a3c9df6617f4b3c907d7aa4ded8 ]
Samsung' 840 EVO with the latest firmware (EXT0DB6Q) locks up with
the a message: "READ LOG DMA EXT failed, trying PIO" during boot.
Initially this was discovered because it caused a crash
with the sata_dwc_460ex controller on a WD MyBook Live DUO.
The reporter "Tice Rex" which has the unique opportunity that he
has two Samsung 840 EVO SSD! One with the older firmware "EXT0BB0Q"
which booted fine and didn't expose "READ LOG DMA EXT". But the
newer/latest firmware "EXT0DB6Q" caused the headaches.
BugLink: https://github.com/openwrt/openwrt/issues/9505
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Fri, 1 Apr 2022 05:42:44 +0000 (22:42 -0700)]
net: micrel: fix KS8851_MLL Kconfig
[ Upstream commit
c3efcedd272aa6dd5929e20cf902a52ddaa1197a ]
KS8851_MLL selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL,
so make KS8851_MLL also depend on PTP_1588_CLOCK_OPTIONAL since
'select' does not follow any dependency chains.
Fixes kconfig warning and build errors:
WARNING: unmet direct dependencies detected for MICREL_PHY
Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
Selected by [y]:
- KS8851_MLL [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && HAS_IOMEM [=y]
ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info':
micrel.c:(.text+0xb35): undefined reference to `ptp_clock_index'
ld: drivers/net/phy/micrel.o: in function `lan8814_probe':
micrel.c:(.text+0x2586): undefined reference to `ptp_clock_register'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tyrel Datwyler [Tue, 22 Mar 2022 19:44:43 +0000 (12:44 -0700)]
scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024
[ Upstream commit
0bade8e53279157c7cc9dd95d573b7e82223d78a ]
The adapter request_limit is hardcoded to be INITIAL_SRP_LIMIT which is
currently an arbitrary value of 800. Increase this value to 1024 which
better matches the characteristics of the typical IBMi Initiator that
supports 32 LUNs and a queue depth of 32.
This change also has the secondary benefit of being a power of two as
required by the kfifo API. Since, Commit
ab9bb6318b09 ("Partially revert
"kfifo: fix kfifo_alloc() and kfifo_init()"") the size of IU pool for each
target has been rounded down to 512 when attempting to kfifo_init() those
pools with the current request_limit size of 800.
Link: https://lore.kernel.org/r/20220322194443.678433-1-tyreld@linux.ibm.com
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Thu, 17 Mar 2022 03:27:36 +0000 (20:27 -0700)]
scsi: lpfc: Fix queue failures when recovering from PCI parity error
[ Upstream commit
df0101197c4d9596682901631f3ee193ed354873 ]
When recovering from a pci-parity error the driver is failing to re-create
queues, causing recovery to fail. Looking deeper, it was found that the
interrupt vector count allocated on the recovery was fewer than the vectors
originally allocated. This disparity resulted in CPU map entries with stale
information. When the driver tries to re-create the queues, it attempts to
use the stale information which indicates an eq/interrupt vector that was
no longer created.
Fix by clearng the cpup map array before enabling and requesting the IRQs
in the lpfc_sli_reset_slot_s4 routine().
Link: https://lore.kernel.org/r/20220317032737.45308-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaoguang Wang [Fri, 11 Mar 2022 13:22:05 +0000 (21:22 +0800)]
scsi: target: tcmu: Fix possible page UAF
[ Upstream commit
a6968f7a367f128d120447360734344d5a3d5336 ]
tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not
take refcount properly and just returns page pointer. When
tcmu_try_get_data_page() returns, the returned page may have been freed by
tcmu_blocks_release().
We need to get_page() under cmdr_lock to avoid concurrent
tcmu_blocks_release().
Link: https://lore.kernel.org/r/20220311132206.24515-1-xiaoguang.wang@linux.alibaba.com
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Kelley [Sun, 27 Mar 2022 15:25:10 +0000 (08:25 -0700)]
Drivers: hv: vmbus: Prevent load re-ordering when reading ring buffer
[ Upstream commit
b6cae15b5710c8097aad26a2e5e752c323ee5348 ]
When reading a packet from a host-to-guest ring buffer, there is no
memory barrier between reading the write index (to see if there is
a packet to read) and reading the contents of the packet. The Hyper-V
host uses store-release when updating the write index to ensure that
writes of the packet data are completed first. On the guest side,
the processor can reorder and read the packet data before the write
index, and sometimes get stale packet data. Getting such stale packet
data has been observed in a reproducible case in a VM on ARM64.
Fix this by using virt_load_acquire() to read the write index,
ensuring that reads of the packet data cannot be reordered
before it. Preventing such reordering is logically correct, and
with this change, getting stale data can no longer be reproduced.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/1648394710-33480-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Kelley [Thu, 24 Mar 2022 16:14:52 +0000 (09:14 -0700)]
PCI: hv: Propagate coherence from VMbus device to PCI device
[ Upstream commit
8d21732475c637c7efcdb91dc927a4c594e97898 ]
PCI pass-thru devices in a Hyper-V VM are represented as a VMBus
device and as a PCI device. The coherence of the VMbus device is
set based on the VMbus node in ACPI, but the PCI device has no
ACPI node and defaults to not hardware coherent. This results
in extra software coherence management overhead on ARM64 when
devices are hardware coherent.
Fix this by setting up the PCI host bus so that normal
PCI mechanisms will propagate the coherence of the VMbus
device to the PCI device. There's no effect on x86/x64 where
devices are always hardware coherent.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1648138492-2191-3-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Parri (Microsoft) [Tue, 1 Mar 2022 14:11:35 +0000 (15:11 +0100)]
Drivers: hv: vmbus: Deactivate sysctl_record_panic_msg by default in isolated guests
[ Upstream commit
9f8b577f7b43b2170628d6c537252785dcc2dcea ]
hv_panic_page might contain guest-sensitive information, do not dump it
over to Hyper-V by default in isolated guests.
While at it, update some comments in hyperv_{panic,die}_event().
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/20220301141135.2232-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
QintaoShen [Thu, 24 Mar 2022 08:26:23 +0000 (16:26 +0800)]
drm/amdkfd: Check for potential null return of kmalloc_array()
[ Upstream commit
ebbb7bb9e80305820dc2328a371c1b35679f2667 ]
As the kmalloc_array() may return null, the 'event_waiters[i].wait' would lead to null-pointer dereference.
Therefore, it is better to check the return value of kmalloc_array() to avoid this confusion.
Signed-off-by: QintaoShen <unSimple1993@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tianci Yin [Wed, 23 Mar 2022 15:54:58 +0000 (23:54 +0800)]
drm/amdgpu/vcn: improve vcn dpg stop procedure
[ Upstream commit
6ea239adc2a712eb318f04f5c29b018ba65ea38a ]
Prior to disabling dpg, VCN need unpausing dpg mode, or VCN will hang in
S3 resuming.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tushar Patel [Thu, 17 Mar 2022 19:31:22 +0000 (15:31 -0400)]
drm/amdkfd: Fix Incorrect VMIDs passed to HWS
[ Upstream commit
b7dfbd2e601f3fee545bc158feceba4f340fe7cf ]
Compute-only GPUs have more than 8 VMIDs allocated to KFD. Fix
this by passing correct number of VMIDs to HWS
v2: squash in warning fix (Alex)
Signed-off-by: Tushar Patel <tushar.patel@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leo (Hanghong) Ma [Fri, 11 Mar 2022 16:35:29 +0000 (11:35 -0500)]
drm/amd/display: Update VTEM Infopacket definition
[ Upstream commit
c9fbf6435162ed5fb7201d1d4adf6585c6a8c327 ]
[Why & How]
The latest HDMI SPEC has updated the VTEM packet structure,
so change the VTEM Infopacket defined in the driver side to align
with the SPEC.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chiawen Huang [Wed, 9 Mar 2022 16:07:59 +0000 (00:07 +0800)]
drm/amd/display: FEC check in timing validation
[ Upstream commit
7d56a154e22ffb3613fdebf83ec34d5225a22993 ]
[Why]
disable/enable leads FEC mismatch between hw/sw FEC state.
[How]
check FEC status to fastboot on/off.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Charlene Liu [Mon, 7 Mar 2022 23:31:29 +0000 (18:31 -0500)]
drm/amd/display: fix audio format not updated after edid updated
[ Upstream commit
5e8a71cf13bc9184fee915b2220be71b4c6cac74 ]
[why]
for the case edid change only changed audio format.
driver still need to update stream.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Deucher [Wed, 9 Mar 2022 23:02:11 +0000 (18:02 -0500)]
drm/amdgpu/gmc: use PCI BARs for APUs in passthrough
[ Upstream commit
b818a5d374542ccec73dcfe578a081574029820e ]
If the GPU is passed through to a guest VM, use the PCI
BAR for CPU FB access rather than the physical address of
carve out. The physical address is not valid in a guest.
v2: Fix HDP handing as suggested by Michel
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guchun Chen [Tue, 15 Mar 2022 06:59:28 +0000 (14:59 +0800)]
drm/amdgpu: conduct a proper cleanup of PDB bo
[ Upstream commit
2d505453f38e18d42ba7d5428aaa17aaa7752c65 ]
Use amdgpu_bo_free_kernel instead of amdgpu_bo_unref to
perform a proper cleanup of PDB bo.
v2: update subject to be more accurate
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josef Bacik [Wed, 23 Mar 2022 15:30:36 +0000 (11:30 -0400)]
btrfs: do not warn for free space inode in cow_file_range
[ Upstream commit
a7d16d9a07bbcb7dcd5214a1bea75c808830bc0d ]
This is a long time leftover from when I originally added the free space
inode, the point was to catch cases where we weren't honoring the NOCOW
flag. However there exists a race with relocation, if we allocate our
free space inode in a block group that is about to be relocated, we
could trigger the COW path before the relocation has the opportunity to
find the extents and delete the free space cache. In production where
we have auto-relocation enabled we're seeing this WARN_ON_ONCE() around
5k times in a 2 week period, so not super common but enough that it's at
the top of our metrics.
We're properly handling the error here, and with us phasing out v1 space
cache anyway just drop the WARN_ON_ONCE.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Darrick J. Wong [Mon, 14 Mar 2022 17:55:32 +0000 (10:55 -0700)]
btrfs: fix fallocate to use file_modified to update permissions consistently
[ Upstream commit
05fd9564e9faf0f23b4676385e27d9405cef6637 ]
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero range). Because the call can be used to change file contents, we
should treat it like we do any other modification to a file -- update
the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aurabindo Pillai [Tue, 15 Mar 2022 18:53:24 +0000 (14:53 -0400)]
drm/amd: Add USBC connector ID
[ Upstream commit
c5c948aa894a831f96fccd025e47186b1ee41615 ]
[Why&How] Add a dedicated AMDGPU specific ID for use with
newer ASICs that support USB-C output
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming Lei [Thu, 14 Apr 2022 08:44:43 +0000 (16:44 +0800)]
block: fix offset/size check in bio_trim()
[ Upstream commit
8535c0185d14ea41f0efd6a357961b05daf6687e ]
Unit of bio->bi_iter.bi_size is bytes, but unit of offset/size
is sector.
Fix the above issue in checking offset/size in bio_trim().
Fixes:
e83502ca5f1e ("block: fix argument type of bio_trim()")
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220414084443.1736850-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeremy Linton [Tue, 12 Apr 2022 21:04:20 +0000 (16:04 -0500)]
net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"
[ Upstream commit
2df3fc4a84e917a422935cc5bae18f43f9955d31 ]
It turns out after digging deeper into this bug, that it was being
triggered by GCC12 failing to call the bcmgenet_enable_dma()
routine. Given that a gcc12 fix has been merged [1] and the genet
driver now works properly when built with gcc12, this commit should
be reverted.
[1]
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105160
https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=
aabb9a261ef060cf24fd626713f1d7d9df81aa57
Fixes:
8d3ea3d402db ("net: bcmgenet: Use stronger register read/writes to assure ordering")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220412210420.1129430-1-jeremy.linton@arm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Gunthorpe [Wed, 13 Apr 2022 13:10:36 +0000 (10:10 -0300)]
vfio/pci: Fix vf_token mechanism when device-specific VF drivers are used
[ Upstream commit
1ef3342a934e235aca72b4bcc0d6854d80a65077 ]
get_pf_vdev() tries to check if a PF is a VFIO PF by looking at the driver:
if (pci_dev_driver(physfn) != pci_dev_driver(vdev->pdev)) {
However now that we have multiple VF and PF drivers this is no longer
reliable.
This means that security tests realted to vf_token can be skipped by
mixing and matching different VFIO PCI drivers.
Instead of trying to use the driver core to find the PF devices maintain a
linked list of all PF vfio_pci_core_device's that we have called
pci_enable_sriov() on.
When registering a VF just search the list to see if the PF is present and
record the match permanently in the struct. PCI core locking prevents a PF
from passing pci_disable_sriov() while VF drivers are attached so the VFIO
owned PF becomes a static property of the VF.
In common cases where vfio does not own the PF the global list remains
empty and the VF's pointer is statically NULL.
This also fixes a lockdep splat from recursive locking of the
vfio_group::device_lock between vfio_device_get_from_name() and
vfio_device_get_from_dev(). If the VF and PF share the same group this
would deadlock.
Fixes:
ff53edf6d6ab ("vfio/pci: Split the pci_driver code out of vfio_pci_core.c")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v3-876570980634+f2e8-vfio_vf_token_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Khazhismel Kumykov [Mon, 11 Apr 2022 22:03:35 +0000 (15:03 -0700)]
dm mpath: only use ktime_get_ns() in historical selector
[ Upstream commit
ce40426fdc3c92acdba6b5ca74bc7277ffaa6a3d ]
Mixing sched_clock() and ktime_get_ns() usage will give bad results.
Switch hst_select_path() from using sched_clock() to ktime_get_ns().
Also rename path_service_time()'s 'sched_now' variable to 'now'.
Fixes:
2613eab11996 ("dm mpath: add Historical Service Time Path Selector")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Harshit Mogalapalli [Wed, 13 Apr 2022 11:42:51 +0000 (04:42 -0700)]
cifs: potential buffer overflow in handling symlinks
[ Upstream commit
64c4a37ac04eeb43c42d272f6e6c8c12bfcf4304 ]
Smatch printed a warning:
arch/x86/crypto/poly1305_glue.c:198 poly1305_update_arch() error:
__memcpy() 'dctx->buf' too small (16 vs u32max)
It's caused because Smatch marks 'link_len' as untrusted since it comes
from sscanf(). Add a check to ensure that 'link_len' is not larger than
the size of the 'link_str' buffer.
Fixes:
c69c1b6eaea1 ("cifs: implement CIFSParseMFSymlink()")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lin Ma [Tue, 12 Apr 2022 16:04:30 +0000 (00:04 +0800)]
nfc: nci: add flush_workqueue to prevent uaf
[ Upstream commit
ef27324e2cb7bb24542d6cb2571740eefe6b00dc ]
Our detector found a concurrent use-after-free bug when detaching an
NCI device. The main reason for this bug is the unexpected scheduling
between the used delayed mechanism (timer and workqueue).
The race can be demonstrated below:
Thread-1 Thread-2
| nci_dev_up()
| nci_open_device()
| __nci_request(nci_reset_req)
| nci_send_cmd
| queue_work(cmd_work)
nci_unregister_device() |
nci_close_device() | ...
del_timer_sync(cmd_timer)[1] |
... | Worker
nci_free_device() | nci_cmd_work()
kfree(ndev)[3] | mod_timer(cmd_timer)[2]
In short, the cleanup routine thought that the cmd_timer has already
been detached by [1] but the mod_timer can re-attach the timer [2], even
it is already released [3], resulting in UAF.
This UAF is easy to trigger, crash trace by POC is like below
[ 66.703713] ==================================================================
[ 66.703974] BUG: KASAN: use-after-free in enqueue_timer+0x448/0x490
[ 66.703974] Write of size 8 at addr
ffff888009fb7058 by task kworker/u4:1/33
[ 66.703974]
[ 66.703974] CPU: 1 PID: 33 Comm: kworker/u4:1 Not tainted 5.18.0-rc2 #5
[ 66.703974] Workqueue: nfc2_nci_cmd_wq nci_cmd_work
[ 66.703974] Call Trace:
[ 66.703974] <TASK>
[ 66.703974] dump_stack_lvl+0x57/0x7d
[ 66.703974] print_report.cold+0x5e/0x5db
[ 66.703974] ? enqueue_timer+0x448/0x490
[ 66.703974] kasan_report+0xbe/0x1c0
[ 66.703974] ? enqueue_timer+0x448/0x490
[ 66.703974] enqueue_timer+0x448/0x490
[ 66.703974] __mod_timer+0x5e6/0xb80
[ 66.703974] ? mark_held_locks+0x9e/0xe0
[ 66.703974] ? try_to_del_timer_sync+0xf0/0xf0
[ 66.703974] ? lockdep_hardirqs_on_prepare+0x17b/0x410
[ 66.703974] ? queue_work_on+0x61/0x80
[ 66.703974] ? lockdep_hardirqs_on+0xbf/0x130
[ 66.703974] process_one_work+0x8bb/0x1510
[ 66.703974] ? lockdep_hardirqs_on_prepare+0x410/0x410
[ 66.703974] ? pwq_dec_nr_in_flight+0x230/0x230
[ 66.703974] ? rwlock_bug.part.0+0x90/0x90
[ 66.703974] ? _raw_spin_lock_irq+0x41/0x50
[ 66.703974] worker_thread+0x575/0x1190
[ 66.703974] ? process_one_work+0x1510/0x1510
[ 66.703974] kthread+0x2a0/0x340
[ 66.703974] ? kthread_complete_and_exit+0x20/0x20
[ 66.703974] ret_from_fork+0x22/0x30
[ 66.703974] </TASK>
[ 66.703974]
[ 66.703974] Allocated by task 267:
[ 66.703974] kasan_save_stack+0x1e/0x40
[ 66.703974] __kasan_kmalloc+0x81/0xa0
[ 66.703974] nci_allocate_device+0xd3/0x390
[ 66.703974] nfcmrvl_nci_register_dev+0x183/0x2c0
[ 66.703974] nfcmrvl_nci_uart_open+0xf2/0x1dd
[ 66.703974] nci_uart_tty_ioctl+0x2c3/0x4a0
[ 66.703974] tty_ioctl+0x764/0x1310
[ 66.703974] __x64_sys_ioctl+0x122/0x190
[ 66.703974] do_syscall_64+0x3b/0x90
[ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 66.703974]
[ 66.703974] Freed by task 406:
[ 66.703974] kasan_save_stack+0x1e/0x40
[ 66.703974] kasan_set_track+0x21/0x30
[ 66.703974] kasan_set_free_info+0x20/0x30
[ 66.703974] __kasan_slab_free+0x108/0x170
[ 66.703974] kfree+0xb0/0x330
[ 66.703974] nfcmrvl_nci_unregister_dev+0x90/0xd0
[ 66.703974] nci_uart_tty_close+0xdf/0x180
[ 66.703974] tty_ldisc_kill+0x73/0x110
[ 66.703974] tty_ldisc_hangup+0x281/0x5b0
[ 66.703974] __tty_hangup.part.0+0x431/0x890
[ 66.703974] tty_release+0x3a8/0xc80
[ 66.703974] __fput+0x1f0/0x8c0
[ 66.703974] task_work_run+0xc9/0x170
[ 66.703974] exit_to_user_mode_prepare+0x194/0x1a0
[ 66.703974] syscall_exit_to_user_mode+0x19/0x50
[ 66.703974] do_syscall_64+0x48/0x90
[ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0xae
To fix the UAF, this patch adds flush_workqueue() to ensure the
nci_cmd_work is finished before the following del_timer_sync.
This combination will promise the timer is actually detached.
Fixes:
6a2968aaf50c ("NFC: basic NCI protocol implementation")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dylan Hung [Tue, 12 Apr 2022 11:48:59 +0000 (19:48 +0800)]
net: ftgmac100: access hardware register after clock ready
[ Upstream commit
3d2504524531990b32a0629cc984db44f399d161 ]
AST2600 MAC register 0x58 is writable only when the MAC clock is
enabled. Usually, the MAC clock is enabled by the bootloader so
register 0x58 is set normally when the bootloader is involved. To make
ast2600 ftgmac100 work without the bootloader, postpone the register
write until the clock is ready.
Fixes:
137d23cea1c0 ("net: ftgmac100: Fix Aspeed ast2600 TX hang issue")
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Willi [Tue, 12 Apr 2022 09:34:57 +0000 (11:34 +0200)]
macvlan: Fix leaking skb in source mode with nodst option
[ Upstream commit
e16b859872b87650bb55b12cca5a5fcdc49c1442 ]
The MACVLAN receive handler clones skbs to all matching source MACVLAN
interfaces, before it passes the packet along to match on destination
based MACVLANs.
When using the MACVLAN nodst mode, passing the packet to destination based
MACVLANs is omitted and the handler returns with RX_HANDLER_CONSUMED.
However, the passed skb is not freed, leaking for any packet processed
with the nodst option.
Properly free the skb when consuming packets to fix that leak.
Fixes:
427f0c8c194b ("macvlan: Add nodst option to macvlan type source")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adrian Hunter [Mon, 11 Apr 2022 06:17:58 +0000 (09:17 +0300)]
perf tools: Fix misleading add event PMU debug message
[ Upstream commit
f034fc50d3c7d9385c20d505ab4cf56b8fd18ac7 ]
Fix incorrect debug message:
Attempting to add event pmu 'intel_pt' with '' that may result in
non-fatal errors
which always appears with perf record -vv and intel_pt e.g.
perf record -vv -e intel_pt//u uname
The message is incorrect because there will never be non-fatal errors.
Suppress the message if the PMU is 'selectable' i.e. meant to be
selected directly as an event.
Fixes:
4ac22b484d4c79e8 ("perf parse-events: Make add PMU verbose output clearer")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20220411061758.2458417-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Tue, 12 Apr 2022 13:07:40 +0000 (15:07 +0200)]
ALSA: usb-audio: Limit max buffer and period sizes per time
[ Upstream commit
24d0c9f0e7de95fe3e3e0067cbea1cd5d413244b ]
In the previous fix, we increased the max buffer bytes from 1MB to 4MB
so that we can use bigger buffers for the modern HiFi devices with
higher rates, more channels and wider formats. OTOH, extending this
has a concern that too big buffer is allowed for the lower rates, less
channels and narrower formats; when an application tries to allocate
as big buffer as possible, it'll lead to unexpectedly too huge size.
Also, we had a problem about the inconsistent max buffer and period
bytes for the implicit feedback mode when both streams have different
channels. This was fixed by the (relatively complex) patch to reduce
the max buffer and period bytes accordingly.
This is an alternative fix for those, a patch to kill two birds with
one stone (*): instead of increasing the max buffer bytes blindly and
applying the reduction per channels, we simply use the hw constraints
for the buffer and period "time". Meanwhile the max buffer and period
bytes are set unlimited instead.
Since the inconsistency of buffer (and period) bytes comes from the
difference of the channels in the tied streams, as long as we care
only about the buffer (and period) time, it doesn't matter; the buffer
time is same for different channels, although we still allow higher
buffer size. Similarly, this will allow more buffer bytes for HiFi
devices while it also keeps the reasonable size for the legacy
devices, too.
As of this patch, the max period and buffer time are set to 1 and 2
seconds, which should be large enough for all possible use cases.
(*) No animals were harmed in the making of this patch.
Fixes:
98c27add5d96 ("ALSA: usb-audio: Cap upper limits of buffer/period bytes for implicit fb")
Fixes:
fee2ec8cceb3 ("ALSA: usb-audio: Increase max buffer size")
Link: https://lore.kernel.org/r/20220412130740.18933-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Thu, 7 Apr 2022 21:27:40 +0000 (23:27 +0200)]
ALSA: usb-audio: Increase max buffer size
[ Upstream commit
fee2ec8cceb33b8886bc5894fb07e0b2e34148af ]
The current limit of max buffer size 1MB seems too small for modern
devices with lots of channels and high sample rates.
Let's make bigger, 4MB.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220407212740.17920-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Athira Rajeev [Fri, 8 Apr 2022 07:24:31 +0000 (12:54 +0530)]
testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu set
[ Upstream commit
ce64763c63854b4079f2e036638aa881a1fb3fbc ]
The selftest "mqueue/mq_perf_tests.c" use CPU_ALLOC to allocate
CPU set. This cpu set is used further in pthread_attr_setaffinity_np
and by pthread_create in the code. But in current code, allocated
cpu set is not freed.
Fix this issue by adding CPU_FREE in the "shutdown" function which
is called in most of the error/exit path for the cleanup. There are
few error paths which exit without using shutdown. Add a common goto
error path with CPU_FREE for these cases.
Fixes:
7820b0715b6f ("tools/selftests: add mq_perf_tests")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dylan Yudaken [Tue, 12 Apr 2022 16:30:42 +0000 (09:30 -0700)]
io_uring: verify pad field is 0 in io_get_ext_arg
[ Upstream commit
d2347b9695dafe5c388a5f9aeb70e27a7a4d29cf ]
Ensure that only 0 is passed for pad here.
Fixes:
c73ebb685fb6 ("io_uring: add timeout support for io_uring_enter()")
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220412163042.2788062-5-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dylan Yudaken [Tue, 12 Apr 2022 16:30:40 +0000 (09:30 -0700)]
io_uring: verify that resv2 is 0 in io_uring_rsrc_update2
[ Upstream commit
d8a3ba9c143bf89c032deced8a686ffa53b46098 ]
Verify that the user does not pass in anything but 0 for this field.
Fixes:
992da01aa932 ("io_uring: change registration/upd/rsrc tagging ABI")
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220412163042.2788062-3-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dylan Yudaken [Tue, 12 Apr 2022 16:30:39 +0000 (09:30 -0700)]
io_uring: move io_uring_rsrc_update2 validation
[ Upstream commit
565c5e616e8061b40a2e1d786c418a7ac3503a8d ]
Move validation to be more consistently straight after
copy_from_user. This is already done in io_register_rsrc_update and so
this removes that redundant check.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220412163042.2788062-2-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Tue, 12 Apr 2022 10:26:35 +0000 (12:26 +0200)]
ALSA: mtpav: Don't call card private_free at probe error path
[ Upstream commit
4fb27190879b82e48ce89a56e9d6c04437dbc065 ]
The card destructor of nm256 driver does merely stopping the running
timer, and it's superfluous for the probe error handling. Moreover,
calling this via the previous devres change would lead to another
problem due to the reverse call order.
This patch moves the setup of the private_free callback after the card
registration, so that it can be used only after fully set up.
Fixes:
aa92050f10f0 ("ALSA: mtpav: Allocate resources with device-managed APIs")
Link: https://lore.kernel.org/r/20220412102636.16000-39-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Tue, 12 Apr 2022 10:26:00 +0000 (12:26 +0200)]
ALSA: ad1889: Fix the missing snd_card_free() call at probe error
[ Upstream commit
a8e84a5da18e6d786540aa4ceb6f969d5f1a441d ]
The previous cleanup with devres may lead to the incorrect release
orders at the probe error handling due to the devres's nature. Until
we register the card, snd_card_free() has to be called at first for
releasing the stuff properly when the driver tries to manage and
release the stuff via card->private_free().
This patch fixes it by calling snd_card_free() on the error from the
probe callback using a new helper function.
Fixes:
567f58754109 ("ALSA: ad1889: Allocate resources with device-managed APIs")
Link: https://lore.kernel.org/r/20220412102636.16000-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Antoine Tenart [Tue, 12 Apr 2022 08:14:59 +0000 (10:14 +0200)]
netfilter: nf_tables: nft_parse_register can return a negative value
[ Upstream commit
6c6f9f31ecd47dce1d0dafca4bec8805f9bc97cd ]
Since commit
6e1acfa387b9 ("netfilter: nf_tables: validate registers
coming from userspace.") nft_parse_register can return a negative value,
but the function prototype is still returning an unsigned int.
Fixes:
6e1acfa387b9 ("netfilter: nf_tables: validate registers coming from userspace.")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Petr Malat [Sat, 9 Apr 2022 06:36:11 +0000 (08:36 +0200)]
sctp: Initialize daddr on peeled off socket
[ Upstream commit
8467dda0c26583547731e7f3ea73fc3856bae3bf ]
Function sctp_do_peeloff() wrongly initializes daddr of the original
socket instead of the peeled off socket, which makes getpeername()
return zeroes instead of the primary address. Initialize the new socket
instead.
Fixes:
d570ee490fb1 ("[SCTP]: Correctly set daddr for IPv6 sockets during peeloff")
Signed-off-by: Petr Malat <oss@malat.biz>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/20220409063611.673193-1-oss@malat.biz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Christie [Fri, 8 Apr 2022 00:13:10 +0000 (19:13 -0500)]
scsi: iscsi: Fix unbound endpoint error handling
[ Upstream commit
03690d81974535f228e892a14f0d2d44404fe555 ]
If a driver raises a connection error before the connection is bound, we
can leave a cleanup_work queued that can later run and disconnect/stop a
connection that is logged in. The problem is that drivers can call
iscsi_conn_error_event for endpoints that are connected but not yet bound
when something like the network port they are using is brought down.
iscsi_cleanup_conn_work_fn will check for this and exit early, but if the
cleanup_work is stuck behind other works, it might not get run until after
userspace has done ep_disconnect. Because the endpoint is not yet bound
there was no way for ep_disconnect to flush the work.
The bug of leaving stop_conns queued was added in:
Commit
23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
and:
Commit
0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in
kernel space")
was supposed to fix it, but left this case.
This patch moves the conn state check to before we even queue the work so
we can avoid queueing.
Link: https://lore.kernel.org/r/20220408001314.5014-7-michael.christie@oracle.com
Fixes:
0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space")
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Christie [Fri, 8 Apr 2022 00:13:09 +0000 (19:13 -0500)]
scsi: iscsi: Fix conn cleanup and stop race during iscsid restart
[ Upstream commit
7c6e99c18167ed89729bf167ccb4a7e3ab3115ba ]
If iscsid is doing a stop_conn at the same time the kernel is starting
error recovery we can hit a race that allows the cleanup work to run on a
valid connection. In the race, iscsi_if_stop_conn sees the cleanup bit set,
but it calls flush_work on the clean_work before iscsi_conn_error_event has
queued it. The flush then returns before the queueing and so the
cleanup_work can run later and disconnect/stop a conn while it's in a
connected state.
The patch:
Commit
0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in
kernel space")
added the late stop_conn call bug originally, and the patch:
Commit
23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
attempted to fix it but only fixed the normal EH case and left the above
race for the iscsid restart case. For the normal EH case we don't hit the
race because we only signal userspace to start recovery after we have done
the queueing, so the flush will always catch the queued work or see it
completed.
For iscsid restart cases like boot, we can hit the race because iscsid will
call down to the kernel before the kernel has signaled any error, so both
code paths can be running at the same time. This adds a lock around the
setting of the cleanup bit and queueing so they happen together.
Link: https://lore.kernel.org/r/20220408001314.5014-6-michael.christie@oracle.com
Fixes:
0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space")
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log