Tomasz Bursztyka [Wed, 25 Apr 2012 15:39:19 +0000 (18:39 +0300)]
wifi: Be connected when relevant, stay connected if roaming
Marcel Holtmann [Thu, 26 Apr 2012 06:29:50 +0000 (08:29 +0200)]
doc: Fix description of technology scan method
Marcel Holtmann [Wed, 25 Apr 2012 15:22:54 +0000 (17:22 +0200)]
build: Fix broken --disable-bluetooth
Tomasz Bursztyka [Wed, 25 Apr 2012 11:22:14 +0000 (14:22 +0300)]
service: Fixing which wpspin we set according to PBC method or not
For PBC method, the WiFi.PinWPS has to be NULL.
Fixes BMC#25076
Jukka Rissanen [Wed, 25 Apr 2012 07:41:59 +0000 (10:41 +0300)]
dnsproxy: Delay cache removal
The idea here is to delay cache removal few seconds if there
are no cache users any more (refcount goes to 0). This is useful
for IPv6 RDNSS where new DNS servers are created right after old
one is removed. In this case we do not want to loose the cache
that still has perfectly valid data.
Jukka Rissanen [Wed, 25 Apr 2012 08:20:04 +0000 (11:20 +0300)]
ipconfig: Do not tweak IPv6 status of ignored devices
Marcel Holtmann [Wed, 25 Apr 2012 08:56:23 +0000 (10:56 +0200)]
ethernet: Fix small whitespace issue
Patrik Flykt [Wed, 25 Apr 2012 08:35:03 +0000 (11:35 +0300)]
service: Stay at ready state with a preferred technology
Stay at ready state with a preferred technology also when the
online check fails. Otherwise we end up in an endless autoconnect
loop with two preferred WiFi networks where neither one goes to
online.
Print out a warning message when the online check fails.
Tomasz Bursztyka [Wed, 25 Apr 2012 05:27:36 +0000 (08:27 +0300)]
service: Use the right network keyword for wps
Marcel Holtmann [Tue, 24 Apr 2012 15:17:10 +0000 (17:17 +0200)]
Release 0.82
Tomasz Bursztyka [Tue, 24 Apr 2012 15:10:00 +0000 (18:10 +0300)]
wifi: Fixing autoscan device unref issues
- stop_autoscan() should unref the device only when relevant, i.e. when
interval and/or timeout have been set.
- autoscan_scan_callback() should unref the device since it has been
referenced in throw_wifi_scan()
Jukka Rissanen [Tue, 24 Apr 2012 13:40:41 +0000 (16:40 +0300)]
resolver: Use proper IPv6 source address when sending DNS queries
This fix is for following scenario:
- New interface is coming up.
- There is radvd in the connected network and it is
advertising IPv6 addresses and DNS servers.
- Kernel receives router advertisement and picks up the DNS
server information which is then routed via netlink to
rtnl.c:rtnl_newnduseropt() which then creates DNS listener.
- Kernel activates DAD (duplicate address detection).
- As the DAD takes some time we now have interface up
and it only has link local IPv6 address defined.
- The DNS listener is now using link local source addresses when
sending queries instead of proper autoconfigured addresses.
- When DAD is finished, the interface will have autoconfigured
addresses assigned and corresponding netlink message will cause
function rtnl.c:process_newaddr() to be called.
- If all this happens, then we re-create DNS listener
in dnsproxy.c so that listener will have a proper
(autoconfigured) source address when sending DNS packets.
Tomasz Bursztyka [Tue, 24 Apr 2012 13:29:51 +0000 (16:29 +0300)]
wifi: Autoscan should be started or stopped according to interface's state
Tomasz Bursztyka [Tue, 24 Apr 2012 13:41:37 +0000 (16:41 +0300)]
wifi: Autoscan fallback using a base exponential of 3 and a shorter limit
A base of 2 creates too many scans on too short times, so a base of 3 reduces
this amount. And a limit of 3600 is way too much, a scan every 5 minute is
more relevant.
Patrik Flykt [Tue, 24 Apr 2012 12:34:30 +0000 (15:34 +0300)]
notifier: Handle Manager state when exiting online
Service state can transition from online to disconnect like this:
1) old online - new disconnect/association => association
2) old association - new disconnect/disconnect => disconnect
Create a separate function for leaving online mode, don't rely on
the previous old_state in service_indicate_state().
Fixes BMC#25073
Tomasz Bursztyka [Tue, 24 Apr 2012 14:15:57 +0000 (17:15 +0300)]
service: a wps pin of length 0 is valid and leads to pbc method usage
Tomasz Bursztyka [Tue, 24 Apr 2012 13:46:05 +0000 (16:46 +0300)]
README: adding necessary configuration hints about wpa_supplicant
Patrik Flykt [Tue, 24 Apr 2012 11:02:35 +0000 (14:02 +0300)]
timeserver: Fix NULL network struct access for VPN
A VPN does not have a network struct set. Thus do not attempt to
look up the corresponding interface index for a NULL network
pointer.
Fixes BMC#25075
Marcel Holtmann [Mon, 23 Apr 2012 15:21:07 +0000 (17:21 +0200)]
Release 0.81
Marcel Holtmann [Mon, 23 Apr 2012 15:03:35 +0000 (17:03 +0200)]
doc: Update README to actually reflect reality
Tomasz Bursztyka [Mon, 23 Apr 2012 08:22:21 +0000 (11:22 +0300)]
device: Removing emulated background scanning
Such "background" scanning was in use only for wifi devices. Such feature
is now fully moved and better supported in connman's wifi plugin.
Tomasz Bursztyka [Mon, 23 Apr 2012 08:22:20 +0000 (11:22 +0300)]
device: Remove the scheduled scan method
wifi was the only one using it, and this is replaced by the combination of
bgscan and autoscan.
Tomasz Bursztyka [Mon, 23 Apr 2012 08:22:19 +0000 (11:22 +0300)]
wifi: Remove old background scanning technique call
Tomasz Bursztyka [Mon, 23 Apr 2012 08:22:18 +0000 (11:22 +0300)]
wifi: Specify bgscan parameters according to main.conf settings
Tomasz Bursztyka [Mon, 23 Apr 2012 08:22:17 +0000 (11:22 +0300)]
wifi: Setup autoscan according to the main.conf settings
Tomasz Bursztyka [Mon, 23 Apr 2012 08:22:16 +0000 (11:22 +0300)]
wifi: Adding support for autoscan emulation
Tomasz Bursztyka [Fri, 20 Apr 2012 12:18:36 +0000 (15:18 +0300)]
wifi: Decide to use WPS PBC if the AP is already advertizing for it
Tomasz Bursztyka [Fri, 20 Apr 2012 12:18:35 +0000 (15:18 +0300)]
gsupplicant: Add WPS specific capabilities handling for network
Tomasz Bursztyka [Fri, 20 Apr 2012 12:18:34 +0000 (15:18 +0300)]
gsupplicant: Add WPS specific capabilities parsing for BSS
Marcel Holtmann [Sat, 21 Apr 2012 20:04:29 +0000 (22:04 +0200)]
build: Remove useless alg-test example program
Marcel Holtmann [Sat, 21 Apr 2012 20:02:39 +0000 (22:02 +0200)]
build: Build client and testing tools by default
Marcel Holtmann [Sat, 21 Apr 2012 19:40:20 +0000 (21:40 +0200)]
build: Allow NM and PolicyKit plugins only as builtins
Marcel Holtmann [Sat, 21 Apr 2012 11:53:01 +0000 (13:53 +0200)]
build: Remove duplicate test for wpa_supplicant
Marcel Holtmann [Sat, 21 Apr 2012 11:44:30 +0000 (13:44 +0200)]
build: Always enable essential plugins by default
Marcel Holtmann [Sat, 21 Apr 2012 11:18:32 +0000 (13:18 +0200)]
build: Remove useless fake plugin
Lucas De Marchi [Fri, 20 Apr 2012 16:02:49 +0000 (13:02 -0300)]
build: add unit tests to .gitignore
Lucas De Marchi [Fri, 20 Apr 2012 16:02:48 +0000 (13:02 -0300)]
gweb: don't use deprecated gnutls_session typedef
According to gnutls/compat.h, gnutls_session typedef was deprecated
since 2.x in favor of gnutls_session_t. Use the new typedef then.
Lucas De Marchi [Fri, 20 Apr 2012 16:02:47 +0000 (13:02 -0300)]
gdhcp: fix strict-aliasing warning
The previous way was giving the following warning with gcc 4.7:
CC gdhcp/common.o
gdhcp/common.c: In function 'dhcp_add_simple_option':
gdhcp/common.c:275:38: error: dereferencing type-punned pointer will
break strict-aliasing rules [-Werror=strict-aliasing
Change it slightly so not to give this warning.
Daniel Wagner [Fri, 20 Apr 2012 14:35:48 +0000 (16:35 +0200)]
technology: Fix indention
Jussi Kukkonen [Fri, 20 Apr 2012 13:54:21 +0000 (15:54 +0200)]
ofono: Only register network when APN is set
Empty AccessPointName in a oFono internet context means it cannot
be activated: Don't create networks in this situation.
The conditions for adding a network are then
a) modem supports NetworkRegistration
b) modem has a context with a valid APN
Fixes BMC#24959
Daniel Wagner [Fri, 20 Apr 2012 13:14:56 +0000 (15:14 +0200)]
ofono: Fix network_driver name
Patrik Flykt [Fri, 20 Apr 2012 13:07:33 +0000 (16:07 +0300)]
service: Notify timeserver removal for previous default service
Patrik Flykt [Fri, 20 Apr 2012 13:07:32 +0000 (16:07 +0300)]
timeserver: Notify service of changed timeservers
Patrik Flykt [Fri, 20 Apr 2012 13:07:31 +0000 (16:07 +0300)]
service: Implement service Timeservers property
Fixes BMC#25054.
Patrik Flykt [Fri, 20 Apr 2012 13:07:30 +0000 (16:07 +0300)]
timeserver: Refactor __connman_timeserver_sync()
Factor out code that creates the timeserver list in
__connman_timeserver_sync().
Patrik Flykt [Fri, 20 Apr 2012 13:07:29 +0000 (16:07 +0300)]
configure.ac: Require glib >= 2.28
Jukka Rissanen [Fri, 20 Apr 2012 11:38:56 +0000 (14:38 +0300)]
service: Save new service data only after successful connect
The data for new service was saved into disk (with Favorite=false)
even if the first connection failed. This is now changed and
service data is only saved if user has been able to connect to a
service at least once.
Patrik Flykt [Fri, 20 Apr 2012 11:54:27 +0000 (14:54 +0300)]
main: Mark end of array with NULL in order not to crash
Jukka Rissanen [Fri, 20 Apr 2012 11:28:30 +0000 (14:28 +0300)]
agent: Memory leak in passphrase reply
The pending call was not unreffed.
Jukka Rissanen [Fri, 20 Apr 2012 10:57:03 +0000 (13:57 +0300)]
test: Cannot set both name and passphrase
simple-agent could not be used to return both the Name and Passphrase
fields for hidden psk networks.
Fixes BMC#25058
Patrik Flykt [Fri, 20 Apr 2012 10:47:18 +0000 (13:47 +0300)]
main: Set default values if main.conf is not found
Jukka Rissanen [Thu, 19 Apr 2012 12:29:53 +0000 (15:29 +0300)]
service: Changing default service was not correctly checked
Let the default_changed() function check whether the default service is
really changed as it is doing it correctly every time.
The extra check in the __connman_service_indicate_default() function is
causing problems if the user is moving services around. Then we might be
using the old DNS service data because DNS code did not get information
that default service was changed.
Fixes BMC#25027
Tomasz Bursztyka [Thu, 19 Apr 2012 09:35:12 +0000 (12:35 +0300)]
service: fix glib critical messages about g_sequence_sort_changed
This patch fixes this:
GLib-CRITICAL **: g_sequence_sort_changed: assertion `!is_end (iter)' failed
Daniel Wagner [Thu, 19 Apr 2012 09:58:23 +0000 (11:58 +0200)]
notifier: Change notifer_count_online() to notifier_is_online()
evaluate_notifer_state() is not interested in the number of online
services (which is btw always 0 or 1) just if there is one.
Daniel Wagner [Thu, 19 Apr 2012 09:58:22 +0000 (11:58 +0200)]
notifier: Change __connman_notifier_count_connected() to *_is_connected()
No caller is interested in the number of connected services, only
if there is one or more or none.
Jukka Rissanen [Wed, 18 Apr 2012 14:57:21 +0000 (17:57 +0300)]
pacrunner: Memory leak in dbus container
Valgrind reported memory leak here. The dbus message container
must be not left open because it has allocated resources so we
close the container before returning.
Patrik Flykt [Thu, 19 Apr 2012 08:00:08 +0000 (11:00 +0300)]
service: Send Timeservers.Configuration property changed
Fixes BMC#25055.
Marcel Holtmann [Tue, 17 Apr 2012 13:47:57 +0000 (15:47 +0200)]
Release 0.80
Daniel Wagner [Tue, 17 Apr 2012 13:29:54 +0000 (15:29 +0200)]
notifier: Distinguish between different states
Instead of only having "offline" and "online" states, we support
now having "offline", "idle", "ready" and "online" as on the
Manager.State documenation update required.
Daniel Wagner [Tue, 17 Apr 2012 12:59:01 +0000 (14:59 +0200)]
service: Update notifier on ONLINE state
Daniel Wagner [Tue, 17 Apr 2012 12:58:36 +0000 (14:58 +0200)]
notifier: Add __connman_notifier_online()
For indicating the we entered the ONLINE state.
Daniel Wagner [Tue, 17 Apr 2012 12:57:24 +0000 (14:57 +0200)]
notifier: Add old state to __connman_notifier_disconnect()
The old state helps to distinguish between the transissionts
from CONNECTED -> DISCONNECTED or ONLINE -> DISCONNECTED.
Marcel Holtmann [Tue, 17 Apr 2012 13:23:39 +0000 (15:23 +0200)]
doc: Add missing property for service timeservers
Marcel Holtmann [Tue, 17 Apr 2012 12:48:55 +0000 (14:48 +0200)]
doc: Mention the special offline handling for state property
Marcel Holtmann [Mon, 16 Apr 2012 09:31:32 +0000 (11:31 +0200)]
doc: Update global state property details
Marcel Holtmann [Tue, 17 Apr 2012 12:35:39 +0000 (14:35 +0200)]
notifier: Remove extra empty line
Marcel Holtmann [Tue, 17 Apr 2012 12:31:35 +0000 (14:31 +0200)]
log: Remove D-Bus iterators for debug properties
Marcel Holtmann [Tue, 17 Apr 2012 12:30:55 +0000 (14:30 +0200)]
manager: Remove experimental debug properties
Marcel Holtmann [Tue, 17 Apr 2012 12:28:39 +0000 (14:28 +0200)]
test: Remove handling of no longer existing properties
Marcel Holtmann [Tue, 17 Apr 2012 12:25:18 +0000 (14:25 +0200)]
manager: Make two global variables static
Daniel Wagner [Tue, 17 Apr 2012 11:31:49 +0000 (13:31 +0200)]
network: Remove unused function
Tomasz Bursztyka [Tue, 17 Apr 2012 10:54:24 +0000 (13:54 +0300)]
device: use g_hash_table_replace instead of insert function
Tomasz Bursztyka [Tue, 17 Apr 2012 10:54:23 +0000 (13:54 +0300)]
nat: use g_hash_table_replace instead of insert function
Tomasz Bursztyka [Tue, 17 Apr 2012 10:54:22 +0000 (13:54 +0300)]
task: use g_hash_table_replace instead of insert function
Tomasz Bursztyka [Tue, 17 Apr 2012 10:54:21 +0000 (13:54 +0300)]
vpn: use g_hash_table_replace instead of insert function
Tomasz Bursztyka [Tue, 17 Apr 2012 10:54:20 +0000 (13:54 +0300)]
bluetooth: use g_hash_table_replace instead of insert function
Jukka Rissanen [Tue, 17 Apr 2012 09:32:22 +0000 (12:32 +0300)]
service: Default service notifier is called too many times
The default service notifier is invoked even when the default
service has not been changed. This causes unnecessary dbus
signal traffic.
Fixes BMC#25030
Tomasz Bursztyka [Tue, 17 Apr 2012 09:27:41 +0000 (12:27 +0300)]
service: Use g_hash_table_replace instead of insert function
Tomasz Bursztyka [Tue, 17 Apr 2012 08:18:02 +0000 (11:18 +0300)]
service: Fix service_send_changed abort signal while cleaning up
Tomasz Bursztyka [Tue, 17 Apr 2012 07:10:07 +0000 (10:10 +0300)]
service: Schedule auto connect procedure to be ran on its own
Tomasz Bursztyka [Mon, 16 Apr 2012 13:21:38 +0000 (16:21 +0300)]
service: Do not autoconnect if service is getting removed
While unplugging ethernet cable,
__connman_service_remove_from_network() is called since
related network is getting cleaned up. Therefore ethernet
service goes from online/ready to disconnected, and end
to idle state. However, at that state auto_connect() is
called (even if this service is "planned" to disappear
due to network getting cleaned up) adn we end up with
ethernet network not disappearing, nor its related
service. We only need to set the service as "ignored", so
auto_connect will ignore that particular service.
Julien Massot [Fri, 13 Apr 2012 13:09:03 +0000 (13:09 +0000)]
supplicant: Remove trailing whitespace
Julien Massot [Fri, 13 Apr 2012 15:16:35 +0000 (15:16 +0000)]
service: Move setting of WPS input from agent to service.
Julien Massot [Fri, 13 Apr 2012 15:16:34 +0000 (15:16 +0000)]
service: Add function to check the WPS PIN validity
Julien Massot [Fri, 13 Apr 2012 15:16:33 +0000 (15:16 +0000)]
service: request_input_cb handle wps setting
Julien Massot [Fri, 13 Apr 2012 15:16:32 +0000 (15:16 +0000)]
network: Avoid connection to a network with invalid key
Julien Massot [Fri, 13 Apr 2012 15:16:31 +0000 (15:16 +0000)]
service: Check the passphrase validity
A WPA passphrase is 8..63 char length.
A WPA raw key is always 64 hex digit.
A Wep passphrase is either 5 or 13 characters
A WEP key is 10 or 26 hex digit.
Julien Massot [Fri, 13 Apr 2012 15:16:30 +0000 (15:16 +0000)]
gsupplicant: Interpret "invalid message format" as invalid-key error
If gsupplicant sends a malformed passphrase,
wpa_supplicant return an error "invalid message format",
parsing this error avoids future usage of this passphrase.
Patrik Flykt [Thu, 12 Apr 2012 11:45:05 +0000 (14:45 +0300)]
main.conf: Document main.conf options
Jukka Rissanen [Wed, 4 Apr 2012 08:38:40 +0000 (11:38 +0300)]
test: Remove set-address script
The script is quite useless because it changes the IP address
settings of all found services. The IP settings will be the same
for every service which is probably not what the user wants.
The set-ipv4-method and set-ipv6-method scripts can be used by
the user instead of set-address because those two scripts
will only change settings of one service.
Jukka Rissanen [Thu, 12 Apr 2012 11:30:50 +0000 (14:30 +0300)]
config: Warn user if no configuration is found
This is useful so that user gets information that he needs to
fix the config file.
Marcel Holtmann [Mon, 16 Apr 2012 15:57:08 +0000 (17:57 +0200)]
gdbus: Remove unneeded NEED_DBUS_WATCH_GET_UNIX_FD check
Marcel Holtmann [Mon, 16 Apr 2012 15:56:45 +0000 (17:56 +0200)]
build: Require D-Bus 1.4 or later
Patrik Flykt [Thu, 12 Apr 2012 09:54:32 +0000 (12:54 +0300)]
service: Check for settings list being non-NULL
Patrik Flykt [Wed, 11 Apr 2012 13:29:03 +0000 (16:29 +0300)]
TODO: Mark FallbackNameservers and FallbackTimeservers done
Patrik Flykt [Wed, 11 Apr 2012 13:29:02 +0000 (16:29 +0300)]
resolver: Append fallback nameservers
Append fallback nameservers, if any. Remove functions for adding
removing public nameservers since they are not used anymore.
Patrik Flykt [Wed, 11 Apr 2012 13:29:01 +0000 (16:29 +0300)]
main: Implement 'FallbackNameservers' main.conf option
Implement 'FallbackNameservers' main.conf configuration file
option. While parsing the list of nameservers, use only the ones
in numeric format.
Patrik Flykt [Wed, 11 Apr 2012 13:29:00 +0000 (16:29 +0300)]
google: Remove google nameserver plugin
Jukka Rissanen [Tue, 10 Apr 2012 07:28:20 +0000 (10:28 +0300)]
timeserver: Nameserver array was not freed
Jukka Rissanen [Tue, 10 Apr 2012 07:28:18 +0000 (10:28 +0300)]
timeserver: Timeserver array was not freed