arm64: dts: qcom: sm8250-sony-xperia: correct GPIO keys wakeup again

gpio-keys,wakeup is a deprecated property:

  m8250-sony-xperia-edo-pdx206.dtb: gpio-keys: key-camera-focus: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)

Fixes: a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711063011.16222-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qrb2210-rb1: Add regulators

Add and assign RPM regulators coming from PM2250.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-rb1_regulator-v1-1-bc4398c35800@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180: Bring back cpufreq-based DDR votes

ChromeOS folks reported that bwmon is too slow and getting rid of
statically defined CPUFREQ-based votes (effectively floor votes because of
how opp-peak-kBps is interpreted), has a major performance impact in some
common applications. Bring them back until MEMLAT support is introduced.

This is a partial revert of the commit referenced in the fixes tag.

Fixes: adc16b84e1ea ("arm64: dts: qcom: sc7180: Hook up BWMONs")
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-7180ddr-v1-1-56e4f13afe9b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6350: Add BWMONs

Add the CPU and LLC BWMONs (skip the NPU ones for now) on sm6350.

There are 3 more NPU BWMONs, but these are skipped for now.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-sm638250_bwmon-v1-4-bd4bb96b0673@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: Add BWMONs

Add the CPU and LLC BWMONs (skip the NPU ones for now) on sm8250.

LPDDR4X levels are skipped, as LPDDR5 seems more popular with SM8250 and
voting for inexistent levels doesn't uptick the bus frequency, which
results in no increased bandwidth, which results in bwmon deciding we
shouldn't go higher.. you see the point!

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-sm638250_bwmon-v1-3-bd4bb96b0673@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996: scale CBF clock according to the CPUfreq

Turn CBF into the interconnect provider. Scale CBF frequency (bandwidth)
according to CPU frequencies.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230512001334.2983048-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: Mark SMMUs as DMA coherent

The SMMUs on SM8250 are cache-coherent. Mark them as such.

Fixes: a89441fcd09d ("arm64: dts: qcom: sm8250: add apps_smmu node")
Fixes: 04a3605b184e ("arm64: dts: qcom: add sm8250 GPU nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230704-topic-8250_pcie_dmac-v1-2-799603a980b0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: Mark PCIe hosts as DMA coherent

The PCIe hosts on SM8250 are cache-coherent. Mark them as such.

Fixes: e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230704-topic-8250_pcie_dmac-v1-1-799603a980b0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450-hdk: add ADC-TM thermal zones

Add thermal zones controlled through the ADC-TM (ADC thermal monitoring)
PMIC interface. This includes several onboard sensors and the XO thermal
sensor.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-9-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450-hdk: define DIE_TEMP channels

Declare the DIE_TEMP channels provided by PMICs. Use them to provide
temperature reading for the spmi-temp-alarm thermal zones.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-8-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450-hdk: remove pmr735b PMIC inclusion

The 8450-HDK doesn't use PMR735B PMIC. Drop its inclusion to remove the
warning during the HDK bootup.

Fixes: 30464456a1ea ("arm64: dts: qcom: sm8450-hdk: add pmic files")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-7-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pmk8350: fix ADC-TM compatible string

The commit b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for
pmk8350") for the ADC TM (thermal monitoring device) have used the
compatible string from the vendor kernel ("qcom,adc-tm7"). Use the
proper compatible string that is defined in the upstream kernel
("qcom,spmi-adc-tm5-gen2").

Fixes: b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-6-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pmr735b: fix thermal zone name

The name of the thermal zone in pmr735b.dtsi (pmr735a-thermal) conflicts
with the thermal zone in pmr735a.dtsi. Rename the thermal zone according
to the chip name.

Fixes: 6f3426b3dea4 ("arm64: dts: qcom: pmr735b: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm8350b: fix thermal zone name

The name of the thermal zone in pm8350b.dtsi (pm8350c-thermal) conflicts
with the thermal zone in pm8350c.dtsi. Rename the thermal zone according
to the chip name.

Fixes: 5c1399299d9d ("arm64: dts: qcom: pm8350b: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm8350: fix thermal zone name

The name of the thermal zone in pm8350.dtsi (pm8350c-thermal) conflicts
with the thermal zone in pm8350c.dtsi. Rename the thermal zone according
to the chip name.

Fixes: 7a79b95f4288 ("arm64: dts: qcom: pm8350: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: Use proper CPU compatibles

The Kryo names (once again) turned out to be fake. The CPUs report:

0x412fd050 (CA55 r2p0) (0 - 3)
0x411fd410 (CA78 r1p1) (4 - 6)
0x411fd440 (CX1  r1p1) (7)

Use the compatibles that reflect that.

Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230706-topic-sm8350-cpu-compat-v1-1-f8d6a1869781@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Fix cluster PSCI suspend param

The value was copypasted from 8150, but 8180 expects a different one.
Confirmed with both downstream device tree and Windows DSDT, not tested
on hardware (sorry, I don't have any).

Fix it.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230705-topic-8180_sleep-v1-1-c5dce117364e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: add missing space before {

Add missing whitespace between node name/label and opening {.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705144226.280490-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: Add missing LMH interrupts to cpufreq

Add the missing interrupts that communicate the hardware-managed
throttling to Linux.

Fixes: ccbb3abb23a5 ("arm64: dts: qcom: sm8350: Add cpufreq node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-3-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: Fix CPU idle state residency times

The present values look to have been copypasted from 8150 or 8180.
Fix that.

Fixes: 07ddb302811e ("arm64: dts: qcom: sm8350: Add CPU topology and idle-states")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-2-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: Add missing cluster sleep state

SM8350's cores can be shut off, without engaging full-on SoC-wide power
collapse. Add the missing idle state to allow for that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-1-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qru1000-idp: Add reserved gpio list

Add reserve gpios for QRU1000 IDP platform. These gpios are
needed for modem subsystem.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705091730.32087-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qdu1000-idp: Add reserved gpio list

Add reserve gpios for QDU1000 IDP platform. These gpios are
needed for modem subsystem.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705091730.32087-2-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: minor whitespace cleanup around '='

The DTS code coding style expects exactly one space before and after '='
sign.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230702185051.43867-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8998: Provide XO to RPMCC

The RPMCC node should be fed a reference to the XO fixed clock.
Do so.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230627-topic-98_rpmcc-v1-1-4024e43ad0fc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-tama: Set serial indices and stdout-path

UART6 is used for debug (routed via uSD pins) and UART9 is connected
to the bluetooth chip.

Set indexed aliases to make the GENI UART driver happy and route serial
traffic through the debug uart by default.

Fixes: 30a7f99befc6 ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230627-topic-tama_uart-v1-1-0fa790248db8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996: Add missing interrupt to the USB2 controller

The interrupt line was previously not described. Take care of that.

Fixes: 1e39255ed29d ("arm64: dts: msm8996: Add device node for qcom,dwc3")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-11-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: apq8039-t2: Drop inexistent property

'pin-switch-delay-us' is not used anywhere in the mainline kernel.
Drop it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-4-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939: Add missing 'cache-unified' to L2

Add the missing property to fix the dt checker warning:

qcom/apq8039-t2.dtb: l2-cache: 'cache-unified' is a required property

Fixes: 61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-3-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939: Drop "qcom,idle-state-spc" compatible

As of today, the only cool and legal way to get ARM64 SMP going is
via PSCI (or spin tables). Sadly, not all chip and device vendors were
considerate of this in the early days of arm64. Qualcomm, for example
reused their tried-and-true spin-up method from MSM8974 and their Krait/
arm32 Cortex designs.

MSM8916 supports SMP with its arm32 dt overlay, as probably could 8939.
But the arm64 DT should not define non-PSCI SMP or CPUidle stuff.

Drop the qcom,idle-state-spc compatible (associated with Qualcomm-specific
CPUIdle) to make the dt checker happy:

apq8039-t2.dtb: idle-states: cpu-sleep-0:compatible:
['qcom,idle-state-spc', 'arm,idle-state'] is too long

Fixes: 61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Benjamin Li <benl@squareup.com>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-2-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names

Commit 2b616f86d51b ("arm64: dts: qcom: sc7180: rename labels for DSI
nodes") broke reg-names, possibly with search-and-replace. Fix it.

Fixes: 2b616f86d51b ("arm64: dts: qcom: sc7180: rename labels for DSI nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-1-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6375: Set up L3 scaling

Add the CPU OPP tables including core frequency and L3 bus frequency.
The L3 throughput values were chosen by studying the frequencies
available in HW LUT and picking the highest one that's less than the
CPU frequency. They will be replaced with a dynamic, bwmon-style
decision maker once support for MEMLAT is introduced upstream.

Available values from the HW LUT:
300000
556800
652800
768000
844800
921600
1171200
1382400
1497600

This commit dramatically improves overall performance of the system.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-6375_l3-v1-1-9cb03ef05150@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-pmics: add explicit rtc interrupt parent

Unless explicitly specified the interrupt-parent property is inherited
from the parent node on Linux even though this may not be in full
compliance with the devicetree specification.

Following commit 2d5cab9232ba ("arm64: dts: qcom: sc8280xp-pmics:
Specify interrupt parent explicitly"), add an explicit interrupt parent
also for the PMIC RTC node for the benefit of other operating systems
which may be confused by this omission.

Note that any such OS must still implement a fallback to the root
interrupt domain as most devicetrees are written under the assumption
that the interrupt parent is inherited.

Reported-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627085306.6033-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450: Use standalone ICE node for UFS

With the ICE driver now merged let's convert the ufs node to use the new
style.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221209-dt-binding-ufs-v5-5-c9a58c0a53f5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Fix "status" value

The defined value for "status" is "disabled", not "disable".

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626220957.3945972-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20230620-topic-sc8280_gccgdsc-v2-2-562c1428c10d@linaro.org' into arm64-for-6.6

Merge a set of new SC8280XP GCC GDSC constants from a topic branch,
in order to allow them being used in DeviceTree source.

dt-bindings: clock: qcom,gcc-sc8280xp: Add missing GDSCs

There are 10 more GDSCs that we've not been caring about, and by extension
(and perhaps even more importantly), not putting to sleep. Add them.

Fixes: a66a82f2a55e ("dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-2-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm8953: Add thermal zone

Define the themal zones using the temperature values found in the
downstream 4.9 sources so that the spmi-temp-alarm driver becomes
active.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230625-pm8953-thermal-v1-1-2b4247d2f769@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5332: Add common RDP dtsi file

Add a dtsi file to include interfaces that are common
across IPQ5332 RDPs.

Signed-off-by: Sridharan S N <quic_sridsn@quicinc.com>
Link: https://lore.kernel.org/r/20230623090001.27778-1-quic_sridsn@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp: Add missing SCM interconnect

The SCM interconnect path was missing. Add it.

Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230622-topic-8280scmicc-v1-2-6ef318919ea5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p-ride: enable ethernet0

Enable the first 1Gb ethernet port on sa8775p-ride development board.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-6-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0

Add the MDC and MDIO pin functions for ethernet0 on sa8775p-ride.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-5-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY

Enable the internal PHY on sa8775p-ride.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-4-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface

Add the node for the first ethernet interface on sa8775p platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-3-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: add the SGMII PHY node

Add the internal SGMII/SerDes PHY node for sa8775p platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-mtp: add chassis-type property

Qualcomm's Mobile Test Platforms devices are handsets, set the
chassis-type property to 'handset'.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-5-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm89xx-mtp: add chassis-type property

Qualcomm's Mobile Test Platforms devices are handsets, set the
chassis-type property to 'handset'.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-4-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8[1234]50-hdk: add chassis-type property

Qualcomm's Hardware Development Kits devices are embedded platforms,
set the chassis-type property to 'embedded'.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-3-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8[45]50-qrd: add chassis-type property

Qualcomm's Reference Devices are handsets, set the chassis-type
property to 'handset'.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-2-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8[1235]50-mtp: add chassis-type property

Qualcomm's Mobile Test Platforms devices are handsets, set the
chassis-type property to 'handset'.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-1-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939-sony-xperia-kanuti-tulip: Add missing 'chassis-type'

Sony Xperia M4 Aqua is a handset. Add the chassis-type = "handset"; to it.

Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622021105.66015-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qrb4210-rb2: Enable GPU

Enable the A610 GPU and provide a firmware path to the ZAP blob.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-gpu_tablet_disp-v2-4-0538ea1beb0b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115p-j606f: Enable GPU

Enable the A610 GPU and provide a firmware path to the ZAP blob.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-gpu_tablet_disp-v2-3-0538ea1beb0b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115p-j606f: Hook up display

Enable the required nodes, add the required pins and tweak a
regulator to enable non-simplefb display on the Tab P11.

Do note that there exists a second SKU with a different panel+touch
combo, but due to insufficient information, that will need to be
handled separately.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-gpu_tablet_disp-v2-2-0538ea1beb0b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115: Add GPU nodes

Introduce nodes for the A610 GPU and its GMU wrapper along with the
speedbin fuse entry in QFPROM.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-gpu_tablet_disp-v2-1-0538ea1beb0b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-crd: Fix naming of regulators

The external regulators in the CRD seems to have inherited their names
from the X13s DeviceTree, correct them.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230620203915.141337-2-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-crd: Correct vreg_misc_3p3 GPIO

The vreg_misc_3p3 regulator is controlled by PMC8280_1 GPIO 2, not 1, on
the CRD.

Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620203915.141337-1-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250-edo: Rectify gpio-keys

Set up the corresponding GPIOs properly and add the leftover hardware
buttons to mark this piece of the puzzle complete.

Fixes: 46e14907c716 ("arm64: dts: qcom: sm8250-edo: Add hardware keys")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-4-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC

Xperia 1 II / PRO use the Dialog SLG51000 PMIC for powering some camera
sensors. Add the required nodes to support it and remove its remnants
from -edo.dtsi, as it's absent on 5 II.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-3-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the PDX203&206 DTSIs to better document the hardware.

Diff between 203 and 206:
pm8009_gpios
<                         "CAM_PWR_LD_EN",
>                         "NC",

pm8150_gpios
<                         "NC",
>                         "G_ASSIST_N",
<                         "WLC_EN_N", /* GPIO_10 */
>                         "NC", /* GPIO_10 */
Which is due to 5 II having an additional Google Assistant hardware
button and 1 II having a wireless charger & different camera wiring
to accommodate the additional 3D iToF sensor.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-2-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the PDX203&206 DTSIs to better document the hardware.

Diff between 203 and 206:
<                         "CAM_PWR_A_CS",
>                         "FRONTC_PWR_EN",
<                         "CAM4_MCLK",
<                         "TOF_RST_N",
>                         "NC",
>                         "NC",
<                         "WLC_I2C_SDA",
<                         "WLC_I2C_SCL", /* GPIO_120 */
>                         "NC",
>                         "NC",
<                         "WLC_INT_N",
>                         "NC",

Which makes sense, as 203 has a 3D iToF, slightly different camera
power wiring and WLC (WireLess Charging).

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-1-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-samsung-serranove: Add RT5033 PMIC with charger

For the regulators, apply the same settings as in the downstream
devicetree [1], including the "regulator-always-on" for the SAFE_LDO.
For the voltage of SAFE_LDO, however, there is only one voltage of 4.9 V
available in the mainline driver [2][3].

The values of the battery data evolve from following sources:
- precharge current: 450 mA corresponds to the default value of the chip. It
  doesn't get changed by the downstream Android driver. Therefore let's stick
  to this value.
- constant charge current: The 1000 mA are taken from the downstream devicetree
  of the serranove battery. It's not easy to spot. The value is in the line
  "input_current_limit" [4]. The rows are according to the power supply type,
  the 4th value stands for "main supply" [5]. That's the value used by the
  Android driver when a charging cable is plugged into the device.
- charge termination current: In the downstream devicetree of the battery
  that's the line "full_check_current_1st", which contains the 150 mA [6].
- precharge voltage: This one doesn't get set in the downstream Android driver.
  The chip's default is 2.8 V. That seemed too low to have a notable effect of
  handling the battery gentle. The chosen value of 3.5 V is a bit arbitrary
  and possibly rather high. As the device is already several years old and
  therefore most batteries too, a value on the safe side seems reasonable.
- constant charge voltage: The value of 4.35 V is set in the line
  "chg_float_voltage" of the downstream battery devicetree [7].

The "connector" sub-node in the extcon node, the "battery" node in the
general section and the line "power-supplies" in the fuel-gauge node result
from the way of implementation documented in the dt-bindings of
rt5033-charger [8] and mfd rt5033 [9].

[1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/arch/arm/boot/dts/samsung/msm8916/msm8916-sec-serranovelte-eur-r03.dtsi#L135-L181
[2] https://github.com/torvalds/linux/blob/v6.3/include/linux/mfd/rt5033-private.h#L211-L212
[3] https://github.com/torvalds/linux/blob/v6.3/drivers/regulator/rt5033-regulator.c#L83
[4] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/arch/arm/boot/dts/samsung/msm8916/msm8916-sec-serranovelte-battery-r01.dtsi#L100
[5] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/include/linux/power_supply.h#L173-L177
[6] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/arch/arm/boot/dts/samsung/msm8916/msm8916-sec-serranovelte-battery-r01.dtsi#L102
[7] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/arch/arm/boot/dts/samsung/msm8916/msm8916-sec-serranovelte-battery-r01.dtsi#L95
[8] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml?h=next-20230616
[9] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml?h=next-20230616

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Link: https://lore.kernel.org/r/20230619203743.8136-1-jahau@rocketmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250-edo: correct ramoops pmsg-size

There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':

  sm8250-sony-xperia-edo-pdx206.dtb: ramoops@ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8150-kumano: correct ramoops pmsg-size

There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':

  sm8150-sony-xperia-kumano-griffin.dtb: ramoops@ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6350: correct ramoops pmsg-size

There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':

  sm6350-sony-xperia-lena-pdx213.dtb: ramoops@ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6125-sprout: correct ramoops pmsg-size

There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':

  sm6125-xiaomi-laurel-sprout.dtb: ramoops@ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6125-pdx201: correct ramoops pmsg-size

There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':

  sm6125-sony-xperia-seine-pdx201.dtb: ramoops@ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450-hdk: correct FSA4480 port

FSA4480 has only one port according to bindings:

  sm8450-hdk.dtb: typec-mux@42: 'port' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350-hdk: correct FSA4480 port

FSA4480 has only one port according to bindings:

  sm8350-hdk.dtb: typec-mux@42: 'port' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115-pro1x: fix incorrect gpio-key,wakeup

Use 'wakeup-source' instead of 'gpio-key,wakeup' to indicate key can
wake-up the device:

  sm6115-fxtec-pro1x.dtb: gpio-keys: key-volume-up: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-15-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x-flex-5g: align gpio-keys node name with bindings

Bindings except certain pattern for gpio-keys children:

  sc8180x-lenovo-flex-5g.dtb: gpio-keys: 'lid' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-14-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x-primus: correct panel ports

Panel takes only one port:

  sc8180x-primus.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-13-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x-flex-5g: correct panel ports

Panel takes only one port:

  sc8180x-lenovo-flex-5g.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: align thermal node name with bindings

Bindings expect thermal node names to end with 'thermal':

  sc8180x-lenovo-flex-5g.dtb: thermal-zones: 'gpu-thermal-bottom', 'gpu-thermal-top' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: use generic ADC channel node names

ADC channel node names were changed to require generic 'channel'.  The
user-visible part is defined via label.

  sc8180x-lenovo-flex-5g.dtb: adc@3100: 'die-temp@6', 'ref-gnd@0', 'vref-1p25@1' do not match any of the regexes: '^channel@[0-9a-f]+$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180-aspire1: use generic ADC channel node names

ADC channel node names were changed to require generic 'channel'.  The
user-visible part is defined via label.

  sc7180-acer-aspire1.dtb: adc@3100: 'charger-thermistor@4f', 'thermistor@4e' do not match any of the regexes: '^channel@[0-9a-f]+$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20230617171541.286957-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996-xiaomi: use generic node names

Use generic node names for I2C devices.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996-xiaomi: drop label from I2C

I2C controller bindings do not allow label property:

  msm8996-xiaomi-gemini.dtb: i2c@75b6000: Unevaluated properties are not allowed ('label' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939: drop incorrect smp2p Hexagon properties

The children of qcom,smp2p do not need address/size-cells:

  msm8939-sony-xperia-kanuti-tulip.dtb: smp2p-hexagon: slave-kernel: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: apq8096-db820c: drop label from I2C

I2C controller bindings do not allow label property:

  apq8096-db820c.dtb: i2c@7577000: Unevaluated properties are not allowed ('label' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: apq8016-sbc: drop label from I2C and SPI

I2C and SPI controller bindings do not allow label property:

  apq8016-sbc.dtb: spi@78b7000: Unevaluated properties are not allowed ('label' was unexpected)
  apq8016-sbc.dtb: i2c@78b6000: Unevaluated properties are not allowed ('label' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-l8150: correct light sensor VDDIO supply

liteon,ltr559 light sensor takes VDDIO, not VIO, supply:

  msm8916-longcheer-l8150.dtb: light-sensor@23: 'vio-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Fixes: 3016af34ef8d ("arm64: dts: qcom: msm8916-longcheer-l8150: Add light and proximity sensor")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20230617171541.286957-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-gt5: drop incorrect accelerometer interrupt-names

st,lis2hh12 accelerometer binding does not allow interrupt-names:

  msm8916-samsung-gt58.dtb: accelerometer@1d: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20230617171541.286957-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x-flex-5g: remove superfluous "input-enable"

Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers.  Since
commit c4a48b0df8bf ("dt-bindings: pinctrl: qcom: tlmm should use
output-disable, not input-enable") the property is not accepted anymore.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617112115.130024-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: apq8039-t2: remove superfluous "input-enable"

Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers.  Since
commit c4a48b0df8bf ("dt-bindings: pinctrl: qcom: tlmm should use
output-disable, not input-enable") the property is not accepted anymore.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617112115.130024-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450: correct crypto unit address

Crypto node unit address should match reg.

Fixes: b92b0d2f7582 ("arm64: dts: qcom: sm8450: add crypto nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230616174955.1783652-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180: Hook up BWMONs

Hook up 2 out of 4 (the rest are for NPU) BWMONs exposed on the SC7180.
This allows for scaling DDR and LLCC independently from cpufreq.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Nikita Travkin <nikita@trvn.ru> # Aspire 1
Link: https://lore.kernel.org/r/20230616-topic-sc7180_bwmons-v1-2-4ddb96f9a6cd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: correct dynamic power coefficients

sm8250 faces the same problem with its Energy Model as sdm845. The energy
cost of LITTLE cores is reported to be higher than medium or big cores

EM computes the energy with formula:

energy = OPP's cost / maximum cpu capacity * utilization

On v6.4-rc6 we have:
max capacity of CPU0 = 284
capacity of CPU0's OPP(1612800 Hz) = 253
cost of CPU0's OPP(1612800 Hz) = 191704

max capacity of CPU4 = 871
capacity of CPU4's OPP(710400 Hz) = 255
cost of CPU4's OPP(710400 Hz) = 343217

Both OPPs have almost the same compute capacity but the estimated energy
per unit of utilization will be estimated to:

energy CPU0 = 191704 / 284 * 1 = 675
energy CPU4 = 343217 / 871 * 1 = 394

EM estimates that little CPU0 will consume 71% more than medium CPU4 for
the same compute capacity. According to [1], little consumes 25% less than
medium core for Coremark benchmark at those OPPs for the same duration.

Set the dynamic-power-coefficient of CPU0-3 to 105 to fix the energy model
for little CPUs.

[1] https://github.com/kdrag0n/freqbench/tree/master/results/sm8250/k30s

Fixes: 6aabed5526ee ("arm64: dts: qcom: sm8250: Add CPU capacities and energy model")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230615154852.130076-1-vincent.guittot@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996: rename labels for HDMI nodes

In board files MDSS and HDMI nodes do not come next to each other,
because labels for HDMI nodes do not have the common mdss_ prefix.

Follow the DSI example and enable such grouping by changing the prefix
for HDMI labels to mdss_hdmi_*.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230615083422.350297-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Revert "arm64: dts: qcom: msm8996: rename labels for HDMI nodes"

The commit f43b6dc7d56e ("arm64: dts: qcom: msm8996: rename labels for
HDMI nodes") is broken, it changes all the HDMI node names,
compatible strings instead of changing just node aliases. Revert the
commit in order to land a proper clean version.

Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: f43b6dc7d56e ("arm64: dts: qcom: msm8996: rename labels for HDMI nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230615083422.350297-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6350: Add DPU1 nodes

Add nodes required to enable MDSS/DPU1 on SM6350. There seem to be no
additional changes required to support the derivative SoCs, such as
SM7225.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-7-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6350: Fix ZAP region

The previous ZAP region definition was wrong. Fix it.
Note this is not a device-specific fixup, but a fixup to the generic
PIL load address.

Fixes: 5f82b9cda61e ("arm64: dts: qcom: Add SM6350 device tree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-6-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6350: Add GPU nodes

Add Adreno, GPU SMMU and GMU nodes to hook up everything that
the A619 needs to function properly.

Co-developed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-5-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6350: Add QFPROM node

Add a node for the QFPROM NVMEM hw and define the GPU fuse.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-4-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6350: Add GPUCC node

Add and configure a node for the GPU clock controller.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-3-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8150: use proper DSI PHY compatible

The DSI PHY on the Qualcomm SM8150 platform requires platform-specific
handling. Use the proper SoC-specific compatible string for the DSI
PHYs.

Reported-by: Degdag Mohamed <degdagmohamed@gmail.com>
Fixes: 2ef3bb17c45c ("arm64: dts: qcom: sm8150: Add DISPCC node")
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230612031623.3620155-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq9574: Enable USB

Add regulator defines
Turn on USB related nodes
Provide vdd info

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/5021dbf3a28ee073795e7580bfa019df465e16ed.1686289721.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq9574: Add LDO regulator node

Add LDO regulator node

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/49b03513a012545651c7d0f149958c78de819880.1686289721.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq9574: Add USB related nodes

Add USB phy and controller related nodes

SS PHY need two supplies and HS PHY needs three supplies. 0.925V
and 3.3V are from fixed regulators and 1.8V is generated from
PMIC's LDO

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/37bd667c065b6c254c7e60ab4ad3a3afbe3b0fac.1686289721.git.quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch 'd1c5aa4a8535c645fdb06df62a562918516ba0c6.1686289721.git.quic_varada@quicinc.com' into HEAD

Merge topic branch with USB clock defines for IPQ9574 into the
DeviceTree source tree.