Linus Torvalds [Sat, 25 Sep 2021 18:08:12 +0000 (11:08 -0700)]
Merge tag '5.15-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Six small cifs/smb3 fixes, two for stable:
- important fix for deferred close (found by a git functional test)
related to attribute caching on close.
- four (two cosmetic, two more serious) small fixes for problems
pointed out by smatch via Dan Carpenter
- fix for comment formatting problems pointed out by W=1"
* tag '5.15-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix incorrect check for null pointer in header_assemble
smb3: correct server pointer dereferencing check to be more consistent
smb3: correct smb3 ACL security descriptor
cifs: Clear modified attribute bit from inode flags
cifs: Deal with some warnings from W=1
cifs: fix a sign extension bug
Linus Torvalds [Sat, 25 Sep 2021 17:29:14 +0000 (10:29 -0700)]
Merge tag 'char-misc-5.15-rc3' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.15-rc3.
Nothing huge in here, just fixes for a number of small issues that
have been reported. These include:
- habanalabs race conditions and other bugs fixed
- binder driver fixes
- fpga driver fixes
- coresight build warning fix
- nvmem driver fix
- comedi memory leak fix
- bcm-vk tty race fix
- other tiny driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
comedi: Fix memory leak in compat_insnlist()
nvmem: NVMEM_NINTENDO_OTP should depend on WII
misc: bcm-vk: fix tty registration race
fpga: dfl: Avoid reads to AFU CSRs during enumeration
fpga: machxo2-spi: Fix missing error code in machxo2_write_complete()
fpga: machxo2-spi: Return an error on failure
habanalabs: expose a single cs seq in staged submissions
habanalabs: fix wait offset handling
habanalabs: rate limit multi CS completion errors
habanalabs/gaudi: fix LBW RR configuration
habanalabs: Fix spelling mistake "FEADBACK" -> "FEEDBACK"
habanalabs: fail collective wait when not supported
habanalabs/gaudi: use direct MSI in single mode
habanalabs: fix kernel OOPs related to staged cs
habanalabs: fix potential race in interrupt wait ioctl
mcb: fix error handling in mcb_alloc_bus()
misc: genwqe: Fixes DMA mask setting
coresight: syscfg: Fix compiler warning
nvmem: core: Add stubs for nvmem_cell_read_variable_le_u32/64 if !CONFIG_NVMEM
binder: make sure fd closes complete
...
Linus Torvalds [Sat, 25 Sep 2021 17:19:49 +0000 (10:19 -0700)]
Merge tag 'staging-5.15-rc3' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 5.15-rc3:
- greybus tty use-after-free bugfix
- r8188eu ioctl overlap build warning fix
Note, the r8188eu ioctl has been entirely removed for 5.16-rc1, but
it's good to get this fixed now for people using this in 5.15.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: fix -Wrestrict warnings
staging: greybus: uart: fix tty use after free
Linus Torvalds [Sat, 25 Sep 2021 17:15:55 +0000 (10:15 -0700)]
Merge tag 'tty-5.15-rc3' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are four small tty/serial driver fixes for 5.15-rc3. They
include:
- remove an export now that no one is using it anymore
- mvebu-uart tx_empty callback fix
- 8250_omap bugfix
- synclink_gt build fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: unexport tty_ldisc_release
tty: synclink_gt: rename a conflicting function name
serial: mvebu-uart: fix driver's tx_empty callback
serial: 8250: 8250_omap: Fix RX_LVL register offset
Linus Torvalds [Sat, 25 Sep 2021 17:10:38 +0000 (10:10 -0700)]
Merge tag 'usb-5.15-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some USB driver fixes and new device ids for 5.15-rc3.
They include:
- usb-storage quirk additions
- usb-serial new device ids
- usb-serial driver fixes
- USB roothub registration bugfix to resolve a long-reported issue
- usb gadget driver fixes for a large number of small things
- dwc2 driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
USB: serial: option: add device id for Foxconn T99W265
USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter
USB: serial: cp210x: add part-number debug printk
USB: serial: cp210x: fix dropped characters with CP2102
MAINTAINERS: usb, update Peter Korsgaard's entries
usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()
usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c
Re-enable UAS for LaCie Rugged USB3-FW with fk quirk
USB: serial: option: remove duplicate USB device ID
USB: serial: mos7840: remove duplicated 0xac24 device ID
arm64: dts: qcom: ipq8074: remove USB tx-fifo-resize property
usb: gadget: f_uac2: Populate SS descriptors' wBytesPerInterval
usb: gadget: f_uac2: Add missing companion descriptor for feedback EP
usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA
usb: core: hcd: Modularize HCD stop configuration in usb_stop_hcd()
xhci: Set HCD flag to defer primary roothub registration
usb: core: hcd: Add support for deferring roothub registration
usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave
usb: dwc3: core: balance phy init and exit
Revert "USB: bcma: Add a check for devm_gpiod_get"
...
Linus Torvalds [Fri, 24 Sep 2021 18:22:55 +0000 (11:22 -0700)]
Merge tag 'gpio-fixes-for-v5.15-rc3' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a regression in GPIO ACPI on HP ElitePad 1000 G2 where the
gpio_set_debounce_timeout() now returns a fatal error if the specific
debounce period is not supported by the driver instead of just
emitting a warning
- fix return values of irq_mask/unmask() callbacks in gpio-uniphier
- fix hwirq calculation in gpio-aspeed-sgpio
- fix two issues in gpio-rockchip: only make the extended debounce
support available for v2 and remove a redundant BIT() usage
* tag 'gpio-fixes-for-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio/rockchip: fix get_direction value handling
gpio/rockchip: extended debounce support is only available on v2
gpio: gpio-aspeed-sgpio: Fix wrong hwirq in irq handler.
gpio: uniphier: Fix void functions to remove return value
gpiolib: acpi: Make set-debounce-timeout failures non fatal
Linus Torvalds [Fri, 24 Sep 2021 18:20:29 +0000 (11:20 -0700)]
Merge tag 'devprop-5.15-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull device properties framework fix from Rafael Wysocki:
"Fix software node refcount imbalance on device removal (Laurentiu
Tudor)"
* tag 'devprop-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
software node: balance refcount for managed software nodes
Linus Torvalds [Fri, 24 Sep 2021 18:17:32 +0000 (11:17 -0700)]
Merge tag 'acpi-5.15-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a recent commit related to memory management that turned out to
be problematic (Jia He)"
* tag 'acpi-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: Add memory semantics to acpi_os_map_memory()"
Linus Torvalds [Fri, 24 Sep 2021 18:12:17 +0000 (11:12 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- It turns out that the optimised string routines merged in 5.14 are
not safe with in-kernel MTE (KASAN_HW_TAGS) because of reading beyond
the end of a string (strcmp, strncmp). Such reading may go across a
16 byte tag granule and cause a tag check fault. When KASAN_HW_TAGS
is enabled, use the generic strcmp/strncmp C implementation.
- An errata workaround for ThunderX relied on the CPU capabilities
being enabled in a specific order. This disappeared with the
automatic generation of the cpucaps.h file (sorted alphabetically).
Fix it by checking the current CPU only rather than the system-wide
capability.
- Add system_supports_mte() checks on the kernel entry/exit path and
thread switching to avoid unnecessary barriers and function calls on
systems where MTE is not supported.
- kselftests: skip arm64 tests if the required features are missing.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Restore forced disabling of KPTI on ThunderX
kselftest/arm64: signal: Skip tests if required features are missing
arm64: Mitigate MTE issues with str{n}cmp()
arm64: add MTE supported check to thread switching and syscall entry/exit
Linus Torvalds [Fri, 24 Sep 2021 17:28:18 +0000 (10:28 -0700)]
Merge tag 'ceph-for-5.15-rc3' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a potential array out of bounds access from Dan"
* tag 'ceph-for-5.15-rc3' of git://github.com/ceph/ceph-client:
ceph: fix off by one bugs in unsafe_request_wait()
Linus Torvalds [Fri, 24 Sep 2021 17:22:35 +0000 (10:22 -0700)]
Merge tag 'fixes_for_v5.15-rc3' of git://git./linux/kernel/git/jack/linux-fs
Pull misc filesystem fixes from Jan Kara:
"A for ext2 sleep in atomic context in case of some fs problems and a
cleanup of an invalidate_lock initialization"
* tag 'fixes_for_v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: fix sleeping in atomic bugs on error
mm: Fully initialize invalidate_lock, amend lock class later
Linus Torvalds [Fri, 24 Sep 2021 17:18:07 +0000 (10:18 -0700)]
Merge branch 'work.init' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"Followups to nodev root stuff from this merge window"
* 'work.init' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
init: don't panic if mount_nodev_root failed
init/do_mounts.c: Harden split_fs_names() against buffer overflow
Linus Torvalds [Fri, 24 Sep 2021 17:14:19 +0000 (10:14 -0700)]
Merge tag 'drm-fixes-2021-09-24' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Quiet week this week, just some i915 and amd fixes, just getting ready
for my all nighter maintainer summit!
Summary:
i915:
- Fix ADL-P memory bandwidth parameters
- Fix memory corruption due to a double free
- Fix memory leak in DMC firmware handling
amdgpu:
- Update MAINTAINERS entry for powerplay
- Fix empty macros
- SI DPM fix
amdkfd:
- SVM fixes
- DMA mapping fix"
* tag 'drm-fixes-2021-09-24' of git://anongit.freedesktop.org/drm/drm:
drm/amdkfd: fix svm_migrate_fini warning
drm/amdkfd: handle svm migrate init error
drm/amd/pm: Update intermediate power state for SI
drm/amdkfd: fix dma mapping leaking warning
drm/amdkfd: SVM map to gpus check vma boundary
MAINTAINERS: fix up entry for AMD Powerplay
drm/amd/display: fix empty debug macros
drm/i915: Free all DMC payloads
drm/i915: Move __i915_gem_free_object to ttm_bo_destroy
drm/i915: Update memory bandwidth parameters
Greg Kroah-Hartman [Fri, 24 Sep 2021 08:22:53 +0000 (10:22 +0200)]
Merge tag 'usb-serial-5.15-rc3' of https://git./linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.15-rc3
Here's a fix for a regression affecting some CP2102 devices and a host
of new device ids.
Included are also a couple of cleanups of duplicate device ids, which
are also tagged for stable to keep the tables in sync, and a trivial
patch to help debugging cp210x issues.
All have been in linux-next with no reported issues. Note however that
the last last two device-id commits were rebased to fix up a lore link
in a commit message (as the patch itself never made it to the list).
* tag 'usb-serial-5.15-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add device id for Foxconn T99W265
USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter
USB: serial: cp210x: add part-number debug printk
USB: serial: cp210x: fix dropped characters with CP2102
USB: serial: option: remove duplicate USB device ID
USB: serial: mos7840: remove duplicated 0xac24 device ID
USB: serial: option: add Telit LN920 compositions
Slark Xiao [Fri, 17 Sep 2021 11:01:06 +0000 (19:01 +0800)]
USB: serial: option: add device id for Foxconn T99W265
Adding support for Foxconn device T99W265 for enumeration with
PID 0xe0db.
usb-devices output for 0xe0db
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=0489 ProdID=e0db Rev=05.04
S: Manufacturer=Microsoft
S: Product=Generic Mobile Broadband Adapter
S: SerialNumber=
6c50f452
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com
[ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Uwe Brandt [Tue, 21 Sep 2021 17:54:46 +0000 (19:54 +0200)]
USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter
Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter.
Signed-off-by: Uwe Brandt <uwe.brandt@gmail.com>
Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Steve French [Fri, 24 Sep 2021 00:18:37 +0000 (19:18 -0500)]
cifs: fix incorrect check for null pointer in header_assemble
Although very unlikely that the tlink pointer would be null in this case,
get_next_mid function can in theory return null (but not an error)
so need to check for null (not for IS_ERR, which can not be returned
here).
Address warning:
fs/smbfs_client/connect.c:2392 cifs_match_super()
warn: 'tlink' isn't an ERR_PTR
Pointed out by Dan Carpenter via smatch code analysis tool
CC: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Thu, 23 Sep 2021 23:52:40 +0000 (18:52 -0500)]
smb3: correct server pointer dereferencing check to be more consistent
Address warning:
fs/smbfs_client/misc.c:273 header_assemble()
warn: variable dereferenced before check 'treeCon->ses->server'
Pointed out by Dan Carpenter via smatch code analysis tool
Although the check is likely unneeded, adding it makes the code
more consistent and easier to read, as the same check is
done elsewhere in the function.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Dave Airlie [Thu, 23 Sep 2021 23:39:16 +0000 (09:39 +1000)]
Merge tag 'drm-intel-fixes-2021-09-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.15-rc3:
- Fix ADL-P memory bandwidth parameters
- Fix memory corruption due to a double free
- Fix memory leak in DMC firmware handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87o88jbk3o.fsf@intel.com
Dave Airlie [Thu, 23 Sep 2021 22:39:02 +0000 (08:39 +1000)]
Merge tag 'amd-drm-fixes-5.15-2021-09-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.15-2021-09-23:
amdgpu:
- Update MAINTAINERS entry for powerplay
- Fix empty macros
- SI DPM fix
amdkfd:
- SVM fixes
- DMA mapping fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923211330.20725-1-alexander.deucher@amd.com
Linus Torvalds [Thu, 23 Sep 2021 21:39:41 +0000 (14:39 -0700)]
Merge tag 'for-5.15-rc2-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- regression fix for leak of transaction handle after verity rollback
failure
- properly reset device last error between mounts
- improve one error handling case when checksumming bios
- fixup confusing displayed size of space info free space
* tag 'for-5.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: prevent __btrfs_dump_space_info() to underflow its free space
btrfs: fix mount failure due to past and transient device flush error
btrfs: fix transaction handle leak after verity rollback failure
btrfs: replace BUG_ON() in btrfs_csum_one_bio() with proper error handling
Steve French [Thu, 23 Sep 2021 21:00:31 +0000 (16:00 -0500)]
smb3: correct smb3 ACL security descriptor
Address warning:
fs/smbfs_client/smb2pdu.c:2425 create_sd_buf()
warn: struct type mismatch 'smb3_acl vs cifs_acl'
Pointed out by Dan Carpenter via smatch code analysis tool
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Thu, 23 Sep 2021 21:17:06 +0000 (14:17 -0700)]
Merge tag 'selinux-pr-
20210923' of git://git./linux/kernel/git/pcmoore/selinux
Pull SELinux/Smack fixes from Paul Moore:
"Another single-patch pull request for SELinux, as well as Smack.
This fixes some credential misuse and is explained reasonably well in
the patch description"
* tag 'selinux-pr-
20210923' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux,smack: fix subjective/objective credential use mixups
Steve French [Thu, 23 Sep 2021 17:42:35 +0000 (12:42 -0500)]
cifs: Clear modified attribute bit from inode flags
Clear CIFS_INO_MODIFIED_ATTR bit from inode flags after
updating mtime and ctime
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Steve French <stfrench@microsoft.com>
Philip Yang [Mon, 20 Sep 2021 21:25:52 +0000 (17:25 -0400)]
drm/amdkfd: fix svm_migrate_fini warning
Device manager releases device-specific resources when a driver
disconnects from a device, devm_memunmap_pages and
devm_release_mem_region calls in svm_migrate_fini are redundant.
It causes below warning trace after patch "drm/amdgpu: Split
amdgpu_device_fini into early and late", so remove function
svm_migrate_fini.
BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718
WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795
devm_release_action+0x51/0x60
Call Trace:
? memunmap_pages+0x360/0x360
svm_migrate_fini+0x2d/0x60 [amdgpu]
kgd2kfd_device_exit+0x23/0xa0 [amdgpu]
amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu]
amdgpu_device_fini_sw+0x45/0x290 [amdgpu]
amdgpu_driver_release_kms+0x12/0x30 [amdgpu]
drm_dev_release+0x20/0x40 [drm]
release_nodes+0x196/0x1e0
device_release_driver_internal+0x104/0x1d0
driver_detach+0x47/0x90
bus_remove_driver+0x7a/0xd0
pci_unregister_driver+0x3d/0x90
amdgpu_exit+0x11/0x20 [amdgpu]
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Fri, 17 Sep 2021 18:32:14 +0000 (14:32 -0400)]
drm/amdkfd: handle svm migrate init error
If svm migration init failed to create pgmap for device memory, set
pgmap type to 0 to disable device SVM support capability.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Thu, 23 Sep 2021 03:58:43 +0000 (11:58 +0800)]
drm/amd/pm: Update intermediate power state for SI
Update the current state as boot state during dpm initialization.
During the subsequent initialization, set_power_state gets called to
transition to the final power state. set_power_state refers to values
from the current state and without current state populated, it could
result in NULL pointer dereference.
For ex: on platforms where PCI speed change is supported through ACPI
ATCS method, the link speed of current state needs to be queried before
deciding on changing to final power state's link speed. The logic to query
ATCS-support was broken on certain platforms. The issue became visible
when broken ATCS-support logic got fixed with commit
f9b7f3703ff9 ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)").
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1698
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Philip Yang [Tue, 14 Sep 2021 20:33:40 +0000 (16:33 -0400)]
drm/amdkfd: fix dma mapping leaking warning
For xnack off, restore work dma unmap previous system memory page, and
dma map the updated system memory page to update GPU mapping, this is
not dma mapping leaking, remove the WARN_ONCE for dma mapping leaking.
prange->dma_addr store the VRAM page pfn after the range migrated to
VRAM, should not dma unmap VRAM page when updating GPU mapping or
remove prange. Add helper svm_is_valid_dma_mapping_addr to check VRAM
page and error cases.
Mask out SVM_RANGE_VRAM_DOMAIN flag in dma_addr before calling amdgpu vm
update to avoid BUG_ON(*addr & 0xFFFF00000000003FULL), and set it again
immediately after. This flag is used to know the type of page later to
dma unmapping system memory page.
Fixes:
1d5dbfe6c06a ("drm/amdkfd: classify and map mixed svm range pages in GPU")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Mon, 13 Sep 2021 14:03:36 +0000 (10:03 -0400)]
drm/amdkfd: SVM map to gpus check vma boundary
SVM range may includes multiple VMAs with different vm_flags, if prange
page index is the last page of the VMA offset + npages, update GPU
mapping to create GPU page table with same VMA access permission.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 17 Sep 2021 16:05:30 +0000 (12:05 -0400)]
MAINTAINERS: fix up entry for AMD Powerplay
Fix the path to cover both the older powerplay infrastructure
and the newer SwSMU infrastructure.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arnd Bergmann [Mon, 20 Sep 2021 12:16:00 +0000 (14:16 +0200)]
drm/amd/display: fix empty debug macros
Using an empty macro expansion as a conditional expression
produces a W=1 warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c: In function 'dce_aux_transfer_with_retries':
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:775:156: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
775 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER");
| ^
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:783:155: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
783 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_NACK");
| ^
Expand it to "do { } while (0)" instead to make the expression
more robust and avoid the warning.
Fixes:
56aca2309301 ("drm/amd/display: Add AUX I2C tracing.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Howells [Mon, 20 Sep 2021 12:14:15 +0000 (13:14 +0100)]
cifs: Deal with some warnings from W=1
Deal with some warnings generated from make W=1:
(1) Add/remove/fix kerneldoc parameters descriptions.
(2) Turn cifs' rqst_page_get_length()'s banner comment into a kerneldoc
comment. It should probably be prefixed with "cifs_" though.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Jia He [Thu, 23 Sep 2021 03:35:57 +0000 (11:35 +0800)]
Revert "ACPI: Add memory semantics to acpi_os_map_memory()"
This reverts commit
437b38c51162f8b87beb28a833c4d5dc85fa864e.
The memory semantics added in commit
437b38c51162 causes SystemMemory
Operation region, whose address range is not described in the EFI memory
map to be mapped as NormalNC memory on arm64 platforms (through
acpi_os_map_memory() in acpi_ex_system_memory_space_handler()).
This triggers the following abort on an ARM64 Ampere eMAG machine,
because presumably the physical address range area backing the Opregion
does not support NormalNC memory attributes driven on the bus.
Internal error: synchronous external abort:
96000410 [#1] SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0+ #462
Hardware name: MiTAC RAPTOR EV-883832-X3-0001/RAPTOR, BIOS 0.14 02/22/2019
pstate:
60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[...snip...]
Call trace:
acpi_ex_system_memory_space_handler+0x26c/0x2c8
acpi_ev_address_space_dispatch+0x228/0x2c4
acpi_ex_access_region+0x114/0x268
acpi_ex_field_datum_io+0x128/0x1b8
acpi_ex_extract_from_field+0x14c/0x2ac
acpi_ex_read_data_from_field+0x190/0x1b8
acpi_ex_resolve_node_to_value+0x1ec/0x288
acpi_ex_resolve_to_value+0x250/0x274
acpi_ds_evaluate_name_path+0xac/0x124
acpi_ds_exec_end_op+0x90/0x410
acpi_ps_parse_loop+0x4ac/0x5d8
acpi_ps_parse_aml+0xe0/0x2c8
acpi_ps_execute_method+0x19c/0x1ac
acpi_ns_evaluate+0x1f8/0x26c
acpi_ns_init_one_device+0x104/0x140
acpi_ns_walk_namespace+0x158/0x1d0
acpi_ns_initialize_devices+0x194/0x218
acpi_initialize_objects+0x48/0x50
acpi_init+0xe0/0x498
If the Opregion address range is not present in the EFI memory map there
is no way for us to determine the memory attributes to use to map it -
defaulting to NormalNC does not work (and it is not correct on a memory
region that may have read side-effects) and therefore commit
437b38c51162 should be reverted, which means reverting back to the
original behavior whereby address ranges that are mapped using
acpi_os_map_memory() default to the safe devicenGnRnE attributes on
ARM64 if the mapped address range is not defined in the EFI memory map.
Fixes:
437b38c51162 ("ACPI: Add memory semantics to acpi_os_map_memory()")
Signed-off-by: Jia He <justin.he@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Thu, 23 Sep 2021 18:24:12 +0000 (11:24 -0700)]
Merge tag 'for-linus-rseq' of git://git./virt/kvm/kvm
Pull rseq fixes from Paolo Bonzini:
"A fix for a bug with restartable sequences and KVM.
KVM's handling of TIF_NOTIFY_RESUME, e.g. for task migration, clears
the flag without informing rseq and leads to stale data in userspace's
rseq struct"
* tag 'for-linus-rseq' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Remove __NR_userfaultfd syscall fallback
KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs
tools: Move x86 syscall number fallbacks to .../uapi/
entry: rseq: Call rseq_handle_notify_resume() in tracehook_notify_resume()
KVM: rseq: Update rseq when processing NOTIFY_RESUME on xfer to KVM guest
Linus Torvalds [Thu, 23 Sep 2021 17:30:31 +0000 (10:30 -0700)]
Merge tag 'net-5.15-rc3' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release - regressions:
- dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports()
Previous releases - regressions:
- introduce a shutdown method to mdio device drivers, and make DSA
switch drivers compatible with masters disappearing on shutdown;
preventing infinite reference wait
- fix issues in mdiobus users related to ->shutdown vs ->remove
- virtio-net: fix pages leaking when building skb in big mode
- xen-netback: correct success/error reporting for the
SKB-with-fraglist
- dsa: tear down devlink port regions when tearing down the devlink
port on error
- nexthop: fix division by zero while replacing a resilient group
- hns3: check queue, vf, vlan ids range before using
Previous releases - always broken:
- napi: fix race against netpoll causing NAPI getting stuck
- mlx4_en: ensure link operstate is updated even if link comes up
before netdev registration
- bnxt_en: fix TX timeout when TX ring size is set to the smallest
- enetc: fix illegal access when reading affinity_hint; prevent oops
on sysfs access
- mtk_eth_soc: avoid creating duplicate offload entries
Misc:
- core: correct the sock::sk_lock.owned lockdep annotations"
* tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
atlantic: Fix issue in the pm resume flow.
net/mlx4_en: Don't allow aRFS for encapsulated packets
net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled
net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries
nfc: st-nci: Add SPI ID matching DT compatible
MAINTAINERS: remove Guvenc Gulce as net/smc maintainer
nexthop: Fix memory leaks in nexthop notification chain listeners
mptcp: ensure tx skbs always have the MPTCP ext
qed: rdma - don't wait for resources under hw error recovery flow
s390/qeth: fix deadlock during failing recovery
s390/qeth: Fix deadlock in remove_discipline
s390/qeth: fix NULL deref in qeth_clear_working_pool_list()
net: dsa: realtek: register the MDIO bus under devres
net: dsa: don't allocate the slave_mii_bus using devres
Doc: networking: Fox a typo in ice.rst
net: dsa: fix dsa_tree_setup error path
net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work
net/smc: add missing error check in smc_clc_prfx_set()
net: hns3: fix a return value error in hclge_get_reset_status()
net: hns3: check vlan id before using it
...
Shakeel Butt [Wed, 22 Sep 2021 22:49:06 +0000 (15:49 -0700)]
memcg: flush lruvec stats in the refault
Prior to the commit
7e1c0d6f5820 ("memcg: switch lruvec stats to rstat")
and the commit
aa48e47e3906 ("memcg: infrastructure to flush memcg
stats"), each lruvec memcg stats can be off by (nr_cgroups * nr_cpus *
32) at worst and for unbounded amount of time. The commit
aa48e47e3906
moved the lruvec stats to rstat infrastructure and the commit
7e1c0d6f5820 bounded the error for all the lruvec stats to (nr_cpus *
32) at worst for at most 2 seconds. More specifically it decoupled the
number of stats and the number of cgroups from the error rate.
However this reduction in error comes with the cost of triggering the
slowpath of stats update more frequently. Previously in the slowpath
the kernel adds the stats up the memcg tree. After
aa48e47e3906, the
kernel triggers the asyn lruvec stats flush through queue_work(). This
causes regression reports from 0day kernel bot [1] as well as from
phoronix test suite [2].
We tried two options to fix the regression:
1) Increase the threshold to trigger the slowpath in lruvec stats
update codepath from 32 to 512.
2) Remove the slowpath from lruvec stats update codepath and instead
flush the stats in the page refault codepath. The assumption is that
the kernel timely flush the stats, so, the update tree would be
small in the refault codepath to not cause the preformance impact.
Following are the results of will-it-scale/page_fault[1|2|3] benchmark
on four settings i.e. (1) 5.15-rc1 as baseline (2) 5.15-rc1 with
aa48e47e3906 and
7e1c0d6f5820 reverted (3) 5.15-rc1 with option-1
(4) 5.15-rc1 with option-2.
test (1) (2) (3) (4)
pg_f1 368563 406277 (10.23%) 399693 (8.44%) 416398 (12.97%)
pg_f2 338399 372133 (9.96%) 369180 (9.09%) 381024 (12.59%)
pg_f3 500853 575399 (14.88%) 570388 (13.88%) 576083 (15.02%)
From the above result, it seems like the option-2 not only solves the
regression but also improves the performance for at least these
benchmarks.
Feng Tang (intel) ran the aim7 benchmark with these two options and
confirms that option-1 reduces the regression but option-2 removes the
regression.
Michael Larabel (phoronix) ran multiple benchmarks with these options
and reported the results at [3] and it shows for most benchmarks
option-2 removes the regression introduced by the commit
aa48e47e3906
("memcg: infrastructure to flush memcg stats").
Based on the experiment results, this patch proposed the option-2 as the
solution to resolve the regression.
Link: https://lore.kernel.org/all/20210726022421.GB21872@xsang-OptiPlex-9020
Link: https://www.phoronix.com/scan.php?page=article&item=linux515-compile-regress
Link: https://openbenchmarking.org/result/2109226-DEBU-LINUX5104
Fixes:
aa48e47e3906 ("memcg: infrastructure to flush memcg stats")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Tested-by: Michael Larabel <Michael@phoronix.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hillf Danton <hdanton@sina.com>,
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Moore [Thu, 23 Sep 2021 13:50:11 +0000 (09:50 -0400)]
selinux,smack: fix subjective/objective credential use mixups
Jann Horn reported a problem with commit
eb1231f73c4d ("selinux:
clarify task subjective and objective credentials") where some LSM
hooks were attempting to access the subjective credentials of a task
other than the current task. Generally speaking, it is not safe to
access another task's subjective credentials and doing so can cause
a number of problems.
Further, while looking into the problem, I realized that Smack was
suffering from a similar problem brought about by a similar commit
1fb057dcde11 ("smack: differentiate between subjective and objective
task credentials").
This patch addresses this problem by restoring the use of the task's
objective credentials in those cases where the task is other than the
current executing task. Not only does this resolve the problem
reported by Jann, it is arguably the correct thing to do in these
cases.
Cc: stable@vger.kernel.org
Fixes:
eb1231f73c4d ("selinux: clarify task subjective and objective credentials")
Fixes:
1fb057dcde11 ("smack: differentiate between subjective and objective task credentials")
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
dann frazier [Thu, 23 Sep 2021 14:50:02 +0000 (08:50 -0600)]
arm64: Restore forced disabling of KPTI on ThunderX
A noted side-effect of commit
0c6c2d3615ef ("arm64: Generate cpucaps.h")
is that cpucaps are now sorted, changing the enumeration order. This
assumed no dependencies between cpucaps, which turned out not to be true
in one case. UNMAP_KERNEL_AT_EL0 currently needs to be processed after
WORKAROUND_CAVIUM_27456. ThunderX systems are incompatible with KPTI, so
unmap_kernel_at_el0() bails if WORKAROUND_CAVIUM_27456 is set. But because
of the sorting, WORKAROUND_CAVIUM_27456 will not yet have been considered
when unmap_kernel_at_el0() checks for it, so the kernel tries to
run w/ KPTI - and quickly falls over.
Because all ThunderX implementations have homogeneous CPUs, we can remove
this dependency by just checking the current CPU for the erratum.
Fixes:
0c6c2d3615ef ("arm64: Generate cpucaps.h")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210923145002.3394558-1-dann.frazier@canonical.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Sudarsana Reddy Kalluru [Thu, 23 Sep 2021 10:16:05 +0000 (03:16 -0700)]
atlantic: Fix issue in the pm resume flow.
After fixing hibernation resume flow, another usecase was found which
should be explicitly handled - resume when device is in "down" state.
Invoke aq_nic_init jointly with aq_nic_start only if ndev was already
up during suspend/hibernate. We still need to perform nic_deinit() if
caller requests for it, to handle the freeze/resume scenarios.
Fixes:
57f780f1c433 ("atlantic: Fix driver resume flow.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aya Levin [Thu, 23 Sep 2021 06:51:45 +0000 (09:51 +0300)]
net/mlx4_en: Don't allow aRFS for encapsulated packets
Driver doesn't support aRFS for encapsulated packets, return early error
in such a case.
Fixes:
1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 23 Sep 2021 02:03:38 +0000 (19:03 -0700)]
net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled
The blamed commit made the fatally incorrect assumption that ports which
aren't in the FORWARDING STP state should not have packets forwarded
towards them, and that is all that needs to be done.
However, that logic alone permits BLOCKING ports to forward to
FORWARDING ports, which of course allows packet storms to occur when
there is an L2 loop.
The ocelot_get_bridge_fwd_mask should not only ask "what can the bridge
do for you", but "what can you do for the bridge". This way, only
FORWARDING ports forward to the other FORWARDING ports from the same
bridging domain, and we are still compatible with the idea of multiple
bridges.
Fixes:
df291e54ccca ("net: ocelot: support multiple bridges")
Suggested-by: Colin Foster <colin.foster@in-advantage.com>
Reported-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Fietkau [Wed, 22 Sep 2021 23:55:48 +0000 (16:55 -0700)]
net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries
Sometimes multiple CLS_REPLACE calls are issued for the same connection.
rhashtable_insert_fast does not check for these duplicates, so multiple
hardware flow entries can be created.
Fix this by checking for an existing entry early
Fixes:
502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mark Brown [Wed, 22 Sep 2021 18:30:37 +0000 (19:30 +0100)]
nfc: st-nci: Add SPI ID matching DT compatible
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding the part name used in
the compatible to the list of SPI IDs.
Fixes:
96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guvenc Gulce [Wed, 22 Sep 2021 17:21:29 +0000 (19:21 +0200)]
MAINTAINERS: remove Guvenc Gulce as net/smc maintainer
Remove myself as net/smc maintainer, as I am
leaving IBM soon and can not maintain net/smc anymore.
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 22 Sep 2021 10:25:40 +0000 (13:25 +0300)]
nexthop: Fix memory leaks in nexthop notification chain listeners
syzkaller discovered memory leaks [1] that can be reduced to the
following commands:
# ip nexthop add id 1 blackhole
# devlink dev reload pci/0000:06:00.0
As part of the reload flow, mlxsw will unregister its netdevs and then
unregister from the nexthop notification chain. Before unregistering
from the notification chain, mlxsw will receive delete notifications for
nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw
will not receive notifications for nexthops using netdevs that are not
dismantled as part of the reload flow. For example, the blackhole
nexthop above that internally uses the loopback netdev as its nexthop
device.
One way to fix this problem is to have listeners flush their nexthop
tables after unregistering from the notification chain. This is
error-prone as evident by this patch and also not symmetric with the
registration path where a listener receives a dump of all the existing
nexthops.
Therefore, fix this problem by replaying delete notifications for the
listener being unregistered. This is symmetric to the registration path
and also consistent with the netdev notification chain.
The above means that unregister_nexthop_notifier(), like
register_nexthop_notifier(), will have to take RTNL in order to iterate
over the existing nexthops and that any callers of the function cannot
hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN
driver. To avoid a deadlock, change the latter to unregister its nexthop
listener without holding RTNL, making it symmetric to the registration
path.
[1]
unreferenced object 0xffff88806173d600 (size 512):
comm "syz-executor.0", pid 1290, jiffies
4295583142 (age 143.507s)
hex dump (first 32 bytes):
41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff A..`......sa....
08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00 ..sa............
backtrace:
[<
ffffffff81a6b576>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<
ffffffff81a6b576>] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522
[<
ffffffff81a716d3>] slab_alloc_node mm/slub.c:3206 [inline]
[<
ffffffff81a716d3>] slab_alloc mm/slub.c:3214 [inline]
[<
ffffffff81a716d3>] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231
[<
ffffffff82e8681a>] kmalloc include/linux/slab.h:591 [inline]
[<
ffffffff82e8681a>] kzalloc include/linux/slab.h:721 [inline]
[<
ffffffff82e8681a>] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline]
[<
ffffffff82e8681a>] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline]
[<
ffffffff82e8681a>] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239
[<
ffffffff813ef67d>] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83
[<
ffffffff813f0662>] blocking_notifier_call_chain kernel/notifier.c:318 [inline]
[<
ffffffff813f0662>] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306
[<
ffffffff8384b9c6>] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244
[<
ffffffff83852bd8>] insert_nexthop net/ipv4/nexthop.c:2336 [inline]
[<
ffffffff83852bd8>] nexthop_add net/ipv4/nexthop.c:2644 [inline]
[<
ffffffff83852bd8>] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913
[<
ffffffff833e9a78>] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572
[<
ffffffff83608703>] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504
[<
ffffffff833de032>] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590
[<
ffffffff836069de>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<
ffffffff836069de>] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340
[<
ffffffff83607501>] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929
[<
ffffffff832fde84>] sock_sendmsg_nosec net/socket.c:704 [inline]
[<
ffffffff832fde84>] sock_sendmsg net/socket.c:724 [inline]
[<
ffffffff832fde84>] ____sys_sendmsg+0x874/0x9f0 net/socket.c:2409
[<
ffffffff83304a44>] ___sys_sendmsg+0x104/0x170 net/socket.c:2463
[<
ffffffff83304c01>] __sys_sendmsg+0x111/0x1f0 net/socket.c:2492
[<
ffffffff83304d5d>] __do_sys_sendmsg net/socket.c:2501 [inline]
[<
ffffffff83304d5d>] __se_sys_sendmsg net/socket.c:2499 [inline]
[<
ffffffff83304d5d>] __x64_sys_sendmsg+0x7d/0xc0 net/socket.c:2499
Fixes:
2a014b200bbd ("mlxsw: spectrum_router: Add support for nexthop objects")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Wed, 22 Sep 2021 11:31:00 +0000 (13:31 +0200)]
USB: serial: cp210x: add part-number debug printk
Add a part-number debug printk to facilitate debugging.
Signed-off-by: Johan Hovold <johan@kernel.org>
Johan Hovold [Wed, 22 Sep 2021 11:30:59 +0000 (13:30 +0200)]
USB: serial: cp210x: fix dropped characters with CP2102
Some CP2102 do not support event-insertion mode but return no error when
attempting to enable it.
This means that any event escape characters in the input stream will not
be escaped by the device and consequently regular data may be
interpreted as escape sequences and be removed from the stream by the
driver.
The reporter's device has batch number DCL00X etched into it and as
discovered by the SHA2017 Badge team, counterfeit devices with that
marking can be detected by sending malformed vendor requests. [1][2]
Tests confirm that the possibly counterfeit CP2102 returns a single byte
in response to a malformed two-byte part-number request, while an
original CP2102 returns two bytes. Assume that every CP2102 that behaves
this way also does not support event-insertion mode (e.g. cannot report
parity errors).
[1] https://mobile.twitter.com/sha2017badge/status/
1167902087289532418
[2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comment-3903376
Reported-by: Malte Di Donato <malte@neo-soft.org>
Tested-by: Malte Di Donato <malte@neo-soft.org>
Fixes:
a7207e9835a4 ("USB: serial: cp210x: add support for line-status events")
Cc: stable@vger.kernel.org # 5.9
Link: https://lore.kernel.org/r/20210922113100.20888-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Geert Uytterhoeven [Wed, 1 Sep 2021 07:09:28 +0000 (09:09 +0200)]
init: Revert accidental changes to print irqs_disabled()
Commit
f8ade8dddb16 ("xsurf100: drop include of lib8390.c") accidentally
changed init/main.c. Revert that part.
Fixes:
f8ade8dddb16 ("xsurf100: drop include of lib8390.c")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Konrad Rzeszutek Wilk [Fri, 17 Sep 2021 16:16:52 +0000 (12:16 -0400)]
MAINTAINERS: Update Xen-[PCI,SWIOTLB,Block] maintainership
Konrad's new job role is putting a serious cramp on him
being a responsive maintainer and as such he is handing off
the reins to Juergen, Roger, and Stefano.
Thank you!
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Konrad Rzeszutek Wilk [Fri, 17 Sep 2021 16:16:51 +0000 (12:16 -0400)]
MAINTAINERS: Update SWIOTLB maintainership
Konrad's new job role is putting a serious cramp on him
being a responsive maintainer and as such he is handing off
the reins to Christoph Hellwig.
Thank you!
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dinh Nguyen [Wed, 22 Sep 2021 19:30:01 +0000 (14:30 -0500)]
MAINTAINERS: update entry for NIOS2
Ley Foon has left Intel and will no longer be able to maintain NIOS2.
Update the MAINTAINER's entry to Dinh Nguyen.
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 22 Sep 2021 18:58:24 +0000 (11:58 -0700)]
Merge tag 'spi-fix-v5.15-rc1' of git://git./linux/kernel/git/broonie/spi
Pull spi modalias fix from Mark Brown:
"Fix modalias issues
As reported by Russell King the change to use OF style modaliases for
DT enumerated broke at least the spi-nor driver, the patch here
reverts that change to fix the regression.
Sadly this will mean that anything that started loading since the
change to OF modaliases will run into issues, there doesn't seem to be
any approach which doesn't cause some problems and thi seems like the
least bad approach - gory details are in the commit log for the
change.
I'm currently working through the SPI drivers to add ID tables and
missing IDs to tables which should address things from the other end,
this seems more straightforward and robust than any other options"
* tag 'spi-fix-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Revert modalias changes
Linus Torvalds [Wed, 22 Sep 2021 16:21:02 +0000 (09:21 -0700)]
Merge tag 'nfsd-5.15-2' of git://git./linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Critical bug fixes:
- Fix crash in NLM TEST procedure
- NFSv4.1+ backchannel not restored after PATH_DOWN"
* tag 'nfsd-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: back channel stuck in SEQ4_STATUS_CB_PATH_DOWN
NLM: Fix svcxdr_encode_owner()
Linus Torvalds [Wed, 22 Sep 2021 16:16:18 +0000 (09:16 -0700)]
Merge tag 'platform-drivers-x86-v5.15-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"The first round of bug-fixes for platform-drivers-x86 for 5.15,
highlights:
- amd-pmc fix for some suspend/resume issues
- intel-hid fix to avoid false-positive SW_TABLET_MODE=1 reporting
- some build error/warning fixes
- various DMI quirk additions"
* tag 'platform-drivers-x86-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: gigabyte-wmi: add support for B550I Aorus Pro AX
platform/x86/intel: hid: Add DMI switches allow list
platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build error
platform/x86: amd-pmc: Increase the response register timeout
platform/x86: touchscreen_dmi: Update info for the Chuwi Hi10 Plus (CWI527) tablet
platform/x86: touchscreen_dmi: Add info for the Chuwi HiBook (CWI514) tablet
lg-laptop: Correctly handle dmi_get_system_info() returning NULL
platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()
Jiri Slaby [Wed, 22 Sep 2021 06:35:58 +0000 (08:35 +0200)]
MAINTAINERS: ARM/VT8500, remove defunct e-mail
linux@prisktech.co.nz is defunct:
4.1.2 <linux@prisktech.co.nz>: Recipient address rejected: Domain not found
Remove it from MAINTAINERS and mark the ARM/VT8500 entry orphan.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sean Christopherson [Wed, 1 Sep 2021 20:30:30 +0000 (13:30 -0700)]
KVM: selftests: Remove __NR_userfaultfd syscall fallback
Revert the __NR_userfaultfd syscall fallback added for KVM selftests now
that x86's unistd_{32,63}.h overrides are under uapi/ and thus not in
KVM selftests' search path, i.e. now that KVM gets x86 syscall numbers
from the installed kernel headers.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210901203030.1292304-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 1 Sep 2021 20:30:29 +0000 (13:30 -0700)]
KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs
Add a test to verify an rseq's CPU ID is updated correctly if the task is
migrated while the kernel is handling KVM_RUN. This is a regression test
for a bug introduced by commit
72c3c0fe54a3 ("x86/kvm: Use generic xfer
to guest work function"), where TIF_NOTIFY_RESUME would be cleared by KVM
without updating rseq, leading to a stale CPU ID and other badness.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Message-Id: <
20210901203030.1292304-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 1 Sep 2021 20:30:28 +0000 (13:30 -0700)]
tools: Move x86 syscall number fallbacks to .../uapi/
Move unistd_{32,64}.h from x86/include/asm to x86/include/uapi/asm so
that tools/selftests that install kernel headers, e.g. KVM selftests, can
include non-uapi tools headers, e.g. to get 'struct list_head', without
effectively overriding the installed non-tool uapi headers.
Swapping KVM's search order, e.g. to search the kernel headers before
tool headers, is not a viable option as doing results in linux/type.h and
other core headers getting pulled from the kernel headers, which do not
have the kernel-internal typedefs that are used through tools, including
many files outside of selftests/kvm's control.
Prior to commit
cec07f53c398 ("perf tools: Move syscall number fallbacks
from perf-sys.h to tools/arch/x86/include/asm/"), the handcoded numbers
were actual fallbacks, i.e. overriding unistd_{32,64}.h from the kernel
headers was unintentional.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210901203030.1292304-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 1 Sep 2021 20:30:27 +0000 (13:30 -0700)]
entry: rseq: Call rseq_handle_notify_resume() in tracehook_notify_resume()
Invoke rseq_handle_notify_resume() from tracehook_notify_resume() now
that the two function are always called back-to-back by architectures
that have rseq. The rseq helper is stubbed out for architectures that
don't support rseq, i.e. this is a nop across the board.
Note, tracehook_notify_resume() is horribly named and arguably does not
belong in tracehook.h as literally every line of code in it has nothing
to do with tracing. But, that's been true since commit
a42c6ded827d
("move key_repace_session_keyring() into tracehook_notify_resume()")
first usurped tracehook_notify_resume() back in 2012. Punt cleaning that
mess up to future patches.
No functional change intended.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210901203030.1292304-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 1 Sep 2021 20:30:26 +0000 (13:30 -0700)]
KVM: rseq: Update rseq when processing NOTIFY_RESUME on xfer to KVM guest
Invoke rseq's NOTIFY_RESUME handler when processing the flag prior to
transferring to a KVM guest, which is roughly equivalent to an exit to
userspace and processes many of the same pending actions. While the task
cannot be in an rseq critical section as the KVM path is reachable only
by via ioctl(KVM_RUN), the side effects that apply to rseq outside of a
critical section still apply, e.g. the current CPU needs to be updated if
the task is migrated.
Clearing TIF_NOTIFY_RESUME without informing rseq can lead to segfaults
and other badness in userspace VMMs that use rseq in combination with KVM,
e.g. due to the CPU ID being stale after task migration.
Fixes:
72c3c0fe54a3 ("x86/kvm: Use generic xfer to guest work function")
Reported-by: Peter Foley <pefoley@google.com>
Bisected-by: Doug Evans <dje@google.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210901203030.1292304-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Abeni [Wed, 22 Sep 2021 11:12:17 +0000 (13:12 +0200)]
mptcp: ensure tx skbs always have the MPTCP ext
Due to signed/unsigned comparison, the expression:
info->size_goal - skb->len > 0
evaluates to true when the size goal is smaller than the
skb size. That results in lack of tx cache refill, so that
the skb allocated by the core TCP code lacks the required
MPTCP skb extensions.
Due to the above, syzbot is able to trigger the following WARN_ON():
WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366
Modules linked in:
CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366
Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9
RSP: 0018:
ffffc9000531f6a0 EFLAGS:
00010216
RAX:
000000000000697f RBX:
0000000000000000 RCX:
ffffc90012107000
RDX:
0000000000040000 RSI:
ffffffff88eac9e2 RDI:
0000000000000003
RBP:
ffff888078b15780 R08:
0000000000000000 R09:
0000000000000000
R10:
ffffffff88eac017 R11:
0000000000000000 R12:
ffff88801de0a280
R13:
0000000000006b58 R14:
ffff888066278280 R15:
ffff88803c2fe9c0
FS:
00007fd9f866e700(0000) GS:
ffff8880b9d00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007faebcb2f718 CR3:
00000000267cb000 CR4:
00000000001506e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
__mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547
mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003
release_sock+0xb4/0x1b0 net/core/sock.c:3206
sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145
mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749
inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
sock_write_iter+0x2a0/0x3e0 net/socket.c:1057
call_write_iter include/linux/fs.h:2163 [inline]
new_sync_write+0x40b/0x640 fs/read_write.c:507
vfs_write+0x7cf/0xae0 fs/read_write.c:594
ksys_write+0x1ee/0x250 fs/read_write.c:647
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007fd9f866e188 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
RAX:
ffffffffffffffda RBX:
000000000056c038 RCX:
00000000004665f9
RDX:
00000000000e7b78 RSI:
0000000020000000 RDI:
0000000000000003
RBP:
00000000004bfcc4 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
000000000056c038
R13:
0000000000a9fb1f R14:
00007fd9f866e300 R15:
0000000000022000
Fix the issue rewriting the relevant expression to avoid
sign-related problems - note: size_goal is always >= 0.
Additionally, ensure that the skb in the tx cache always carries
the relevant extension.
Reported-and-tested-by: syzbot+263a248eec3e875baa7b@syzkaller.appspotmail.com
Fixes:
1094c6fe7280 ("mptcp: fix possible divide by zero")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shai Malin [Wed, 22 Sep 2021 10:53:26 +0000 (13:53 +0300)]
qed: rdma - don't wait for resources under hw error recovery flow
If the HW device is during recovery, the HW resources will never return,
hence we shouldn't wait for the CID (HW context ID) bitmaps to clear.
This fix speeds up the error recovery flow.
Fixes:
64515dc899df ("qed: Add infrastructure for error detection and recovery")
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Tue, 21 Sep 2021 20:32:33 +0000 (23:32 +0300)]
ext2: fix sleeping in atomic bugs on error
The ext2_error() function syncs the filesystem so it sleeps. The caller
is holding a spinlock so it's not allowed to sleep.
ext2_statfs() <- disables preempt
-> ext2_count_free_blocks()
-> ext2_get_group_desc()
Fix this by using WARN() to print an error message and a stack trace
instead of using ext2_error().
Link: https://lore.kernel.org/r/20210921203233.GA16529@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Heiko Stuebner [Mon, 13 Sep 2021 22:49:24 +0000 (00:49 +0200)]
gpio/rockchip: fix get_direction value handling
The function uses the newly introduced rockchip_gpio_readl_bit()
which directly returns the actual value of the requeste bit.
So using the existing bit-wise check for the bit inside the value
will always return 0.
Fix this by dropping the bit manipulation on the result.
Fixes:
3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Heiko Stuebner [Mon, 13 Sep 2021 22:49:23 +0000 (00:49 +0200)]
gpio/rockchip: extended debounce support is only available on v2
The gpio driver runs into issues on v1 gpio blocks, as the db_clk
and the whole extended debounce support is only ever defined on v2.
So checking for the IS_ERR on the db_clk is not enough, as it will
be NULL on v1.
Fix this by adding the needed condition for v2 first before checking
the existence of the db_clk.
This caused my rk3288-veyron-pinky to enter a reboot loop when it
tried to enable the power-key as adc-key device.
Fixes:
3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Steven Lee [Tue, 7 Sep 2021 09:55:25 +0000 (17:55 +0800)]
gpio: gpio-aspeed-sgpio: Fix wrong hwirq in irq handler.
The current hwirq is calculated based on the old GPIO pin order(input
GPIO range is from 0 to ngpios - 1).
It should be calculated based on the current GPIO input pin order(input
GPIOs are 0, 2, 4, ..., (ngpios - 1) * 2).
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Kunihiko Hayashi [Thu, 16 Sep 2021 11:19:35 +0000 (20:19 +0900)]
gpio: uniphier: Fix void functions to remove return value
The return type of irq_chip.irq_mask() and irq_chip.irq_unmask() should
be void.
Fixes:
dbe776c2ca54 ("gpio: uniphier: add UniPhier GPIO controller driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Hans de Goede [Mon, 16 Aug 2021 10:41:19 +0000 (12:41 +0200)]
gpiolib: acpi: Make set-debounce-timeout failures non fatal
Commit
8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
made the gpiolib-acpi code call gpio_set_debounce_timeout() when requesting
GPIOs.
This in itself is fine, but it also made gpio_set_debounce_timeout()
errors fatal, causing the requesting of the GPIO to fail. This is causing
regressions. E.g. on a HP ElitePad 1000 G2 various _AEI specified GPIO
ACPI event sources specify a debouncy timeout of 20 ms, but the
pinctrl-baytrail.c only supports certain fixed values, the closest
ones being 12 or 24 ms and pinctrl-baytrail.c responds with -EINVAL
when specified a value which is not one of the fixed values.
This is causing the acpi_request_own_gpiod() call to fail for 3
ACPI event sources on the HP ElitePad 1000 G2, which in turn is causing
e.g. the battery charging vs discharging status to never get updated,
even though a charger has been plugged-in or unplugged.
Make gpio_set_debounce_timeout() errors non fatal, warning about the
failure instead, to fix this regression.
Note we should probably also fix various pinctrl drivers to just
pick the first bigger discrete value rather then returning -EINVAL but
this will need to be done on a per driver basis, where as this fix
at least gets us back to where things were before and thus restores
functionality on devices where this was lost due to
gpio_set_debounce_timeout() errors.
Fixes:
8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
Depends-on:
2e2b496cebef ("gpiolib: acpi: Extract acpi_request_own_gpiod() helper")
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Jiri Slaby [Wed, 22 Sep 2021 06:30:08 +0000 (08:30 +0200)]
MAINTAINERS: usb, update Peter Korsgaard's entries
Peter's e-mail in MAINTAINERS is defunct:
This is the qmail-send program at a.mx.sunsite.dk.
<jacmet@sunsite.dk>:
Sorry, no mailbox here by that name. (#5.1.1)
Peter says:
** Ahh yes, it should be changed to peter@korsgaard.com.
However he also says:
** I haven't had access to c67x00 hw for quite some years though, so maybe
** it should be marked Orphan instead?
So change as he wishes.
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210922063008.25758-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jakub Kicinski [Wed, 22 Sep 2021 03:02:27 +0000 (20:02 -0700)]
Merge branch 's390-qeth-fixes-2021-09-21'
Julian Wiedmann says:
====================
s390/qeth: fixes 2021-09-21
This brings two fixes for deadlocks when a device is removed while it
has certain types of async work pending. And one additional fix for a
missing NULL check in an error case.
====================
Link: https://lore.kernel.org/r/20210921145217.1584654-1-jwi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexandra Winter [Tue, 21 Sep 2021 14:52:17 +0000 (16:52 +0200)]
s390/qeth: fix deadlock during failing recovery
Commit
0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed
taking discipline_mutex inside qeth_do_reset(), fixing potential
deadlocks. An error path was missed though, that still takes
discipline_mutex and thus has the original deadlock potential.
Intermittent deadlocks were seen when a qeth channel path is configured
offline, causing a race between qeth_do_reset and ccwgroup_remove.
Call qeth_set_offline() directly in the qeth_do_reset() error case and
then a new variant of ccwgroup_set_offline(), without taking
discipline_mutex.
Fixes:
b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexandra Winter [Tue, 21 Sep 2021 14:52:16 +0000 (16:52 +0200)]
s390/qeth: Fix deadlock in remove_discipline
Problem: qeth_close_dev_handler is a worker that tries to acquire
card->discipline_mutex via drv->set_offline() in ccwgroup_set_offline().
Since commit
b41b554c1ee7
("s390/qeth: fix locking for discipline setup / removal")
qeth_remove_discipline() is called under card->discipline_mutex and
cancels the work and waits for it to finish.
STOPLAN reception with reason code IPA_RC_VEPA_TO_VEB_TRANSITION is the
only situation that schedules close_dev_work. In that situation scheduling
qeth recovery will also result in an offline interface, when resetting the
isolation mode fails, if the external switch is still set to VEB.
And since commit
0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery")
qeth recovery does not aquire card->discipline_mutex anymore.
So we accept the longer pathlength of qeth_schedule_recovery in this
error situation and re-use the existing function.
As a side-benefit this changes the hwtrap to behave like during recovery
instead of like during a user-triggered set_offline.
Fixes:
b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Julian Wiedmann [Tue, 21 Sep 2021 14:52:15 +0000 (16:52 +0200)]
s390/qeth: fix NULL deref in qeth_clear_working_pool_list()
When qeth_set_online() calls qeth_clear_working_pool_list() to roll
back after an error exit from qeth_hardsetup_card(), we are at risk of
accessing card->qdio.in_q before it was allocated by
qeth_alloc_qdio_queues() via qeth_mpc_initialize().
qeth_clear_working_pool_list() then dereferences NULL, and by writing to
queue->bufs[i].pool_entry scribbles all over the CPU's lowcore.
Resulting in a crash when those lowcore areas are used next (eg. on
the next machine-check interrupt).
Such a scenario would typically happen when the device is first set
online and its queues aren't allocated yet. An early IO error or certain
misconfigs (eg. mismatched transport mode, bad portno) then cause us to
error out from qeth_hardsetup_card() with card->qdio.in_q still being
NULL.
Fix it by checking the pointer for NULL before accessing it.
Note that we also have (rare) paths inside qeth_mpc_initialize() where
a configuration change can cause us to free the existing queues,
expecting that subsequent code will allocate them again. If we then
error out before that re-allocation happens, the same bug occurs.
Fixes:
eff73e16ee11 ("s390/qeth: tolerate pre-filled RX buffer")
Reported-by: Stefan Raspl <raspl@linux.ibm.com>
Root-caused-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Tue, 21 Sep 2021 20:33:35 +0000 (23:33 +0300)]
cifs: fix a sign extension bug
The problem is the mismatched types between "ctx->total_len" which is
an unsigned int, "rc" which is an int, and "ctx->rc" which is a
ssize_t. The code does:
ctx->rc = (rc == 0) ? ctx->total_len : rc;
We want "ctx->rc" to store the negative "rc" error code. But what
happens is that "rc" is type promoted to a high unsigned int and
'ctx->rc" will store the high positive value instead of a negative
value.
The fix is to change "rc" from an int to a ssize_t.
Fixes:
c610c4b619e5 ("CIFS: Add asynchronous write support through kernel AIO")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Mark Brown [Tue, 21 Sep 2021 14:44:06 +0000 (15:44 +0100)]
spi: Revert modalias changes
During the v5.13 cycle we updated the SPI subsystem to generate OF style
modaliases for SPI devices, replacing the old Linux style modalises we
used to generate based on spi_device_id which are the DT style name with
the vendor removed. Unfortunately this means that we start only
reporting OF style modalises and not the old ones and there is nothing
that ensures that drivers list every possible OF compatible string in
their OF ID table. The result is that there are systems which have been
relying on loading modules based on the old style that are now broken,
as found by Russell King with spi-nor on Macchiatobin.
spi-nor is a particularly problematic case for this, it only lists a
single generic DT compatible jedec,spi-nor in the driver but supports a
huge raft of device specific compatibles, with a large set of part
numbers many of which are offered by multiple vendors. Russell's
searches of upstream device trees has turned up examples with vendor
names written in non-standard ways too. To make matters worse up until
8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec"
binding") the generic compatible was not part of the binding so there
are device trees out there written to that binding version which don't
list it all. The sheer number of parts supported together with our
previous approach of ignoring the vendor ID makes robustly fixing this
by adding compatibles to the spi-nor driver seem problematic, the
current DT binding document does not list all the parts supported by the
driver at the minute (further patches will fix this).
I've also investigated supporting both formats of modalias
simultaneously but that doesn't seem possible, especially without
breaking our userspace ABI which is obviously not viable.
Instead revert the relevant changes for now:
e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support")
3ce6c9e2617e ("spi: add of_device_uevent_modalias support")
This will unfortunately mean that any system which had started having
modules autoload based on the OF compatibles for drivers that list
things there but not in the spi_device_ids will now not have those
modules load which is itself a regression. Since it affects a narrower
time window and the particularly problematic spi-nor driver may be
critical to system boot on smaller systems this seems the best of a
series of bad options. I will start an audit of SPI drivers to identify
and fix cases where things won't autoload using spi_device_id, this is
not great but seems to be the best way forward that anyone has been able
to identify.
Thanks to Russell for both his report and the additional diagnostic and
analysis work he has done here, the detailed research above was his
work.
Fixes:
e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support")
Fixes:
3ce6c9e2617e ("spi: add of_device_uevent_modalias support")
Reported-by: Russell King (Oracle) <linux@armlinux.org.uk>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Andreas Schwab <schwab@suse.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Cristian Marussi [Mon, 20 Sep 2021 12:12:28 +0000 (13:12 +0100)]
kselftest/arm64: signal: Skip tests if required features are missing
During initialization of a signal testcase, features declared as required
are properly checked against the running system but no action is then taken
to effectively skip such a testcase.
Fix core signals test logic to abort initialization and report such a
testcase as skipped to the KSelfTest framework.
Fixes:
f96bf4340316 ("kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210920121228.35368-1-cristian.marussi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Tue, 21 Sep 2021 16:36:11 +0000 (09:36 -0700)]
Merge tag 's390-5.15-ebpf-jit-fixes' of git://git./linux/kernel/git/s390/linux
Pull s390 eBPF fixes from Vasily Gorbik:
"Johan Almbladh has implemented a number of new testcases for eBPF [1],
which uncovered three miscompilation issues in the s390 eBPF JIT"
Link: https://lore.kernel.org/bpf/20210902185229.1840281-1-johan.almbladh@anyfinetworks.com/
* tag 's390-5.15-ebpf-jit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/bpf: Fix optimizing out zero-extensions
s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant
s390/bpf: Fix branch shortening during codegen pass
Ian Abbott [Thu, 16 Sep 2021 14:50:23 +0000 (15:50 +0100)]
comedi: Fix memory leak in compat_insnlist()
`compat_insnlist()` handles the 32-bit version of the `COMEDI_INSNLIST`
ioctl (whenwhen `CONFIG_COMPAT` is enabled). It allocates memory to
temporarily hold an array of `struct comedi_insn` converted from the
32-bit version in user space. This memory is only being freed if there
is a fault while filling the array, otherwise it is leaked.
Add a call to `kfree()` to fix the leak.
Fixes:
b8d47d881305 ("comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSNLIST compat")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Cc: <stable@vger.kernel.org> # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210916145023.157479-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 6 Sep 2021 09:43:01 +0000 (12:43 +0300)]
ceph: fix off by one bugs in unsafe_request_wait()
The "> max" tests should be ">= max" to prevent an out of bounds access
on the next lines.
Fixes:
e1a4541ec0b9 ("ceph: flush the mdlog before waiting on unsafe reqs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Geert Uytterhoeven [Tue, 14 Sep 2021 09:29:49 +0000 (11:29 +0200)]
nvmem: NVMEM_NINTENDO_OTP should depend on WII
The Nintendo Wii and Wii U OTP is only present on Nintendo Wii and Wii U
consoles. Hence add a dependency on WII, to prevent asking the user
about this driver when configuring a kernel without Nintendo Wii and Wii
U console support.
Fixes:
3683b761fe3a10ad ("nvmem: nintendo-otp: Add new driver for the Wii and Wii U OTP")
Reviewed-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/01318920709dddc4d85fe895e2083ca0eee234d8.1631611652.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Mon, 20 Sep 2021 17:26:21 +0000 (10:26 -0700)]
qnx4: work around gcc false positive warning bug
In commit
b7213ffa0e58 ("qnx4: avoid stringop-overread errors") I tried
to teach gcc about how the directory entry structure can be two
different things depending on a status flag. It made the code clearer,
and it seemed to make gcc happy.
However, Arnd points to a gcc bug, where despite using two different
members of a union, gcc then gets confused, and uses the size of one of
the members to decide if a string overrun happens. And not necessarily
the rigth one.
End result: with some configurations, gcc-11 will still complain about
the source buffer size being overread:
fs/qnx4/dir.c: In function 'qnx4_readdir':
fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread]
76 | size = strnlen(name, size);
| ^~~~~~~~~~~~~~~~~~~
fs/qnx4/dir.c:26:22: note: source object declared here
26 | char de_name;
| ^~~~~~~
because gcc will get confused about which union member entry is actually
getting accessed, even when the source code is very clear about it. Gcc
internally will have combined two "redundant" pointers (pointing to
different union elements that are at the same offset), and takes the
size checking from one or the other - not necessarily the right one.
This is clearly a gcc bug, but we can work around it fairly easily. The
biggest thing here is the big honking comment about why we do what we
do.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6
Reported-and-tested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Thu, 16 Sep 2021 13:57:37 +0000 (16:57 +0300)]
usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()
This is writing to the first 1 - 3 bytes of "val" and then writing all
four bytes to musb_writel(). The last byte is always going to be
garbage. Zero out the last bytes instead.
Fixes:
550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210916135737.GI25094@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ondrej Zary [Mon, 13 Sep 2021 21:01:06 +0000 (23:01 +0200)]
usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c
ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has
broken tag handling, preventing the device from working at all:
usb 1-1: new full-speed USB device number 2 using uhci_hcd
usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60
usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0
usb 1-1: Product: USB Device
usb 1-1: Manufacturer: USB Device
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address.
2.6c is the only firmware that claims Linux compatibility.
The firmware can be upgraded using ezotgdbg utility:
https://github.com/asciilifeform/ezotgdbg
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Sikorski [Mon, 13 Sep 2021 18:14:55 +0000 (20:14 +0200)]
Re-enable UAS for LaCie Rugged USB3-FW with fk quirk
Further testing has revealed that LaCie Rugged USB3-FW does work with
uas as long as US_FL_NO_REPORT_OPCODES and US_FL_NO_SAME are enabled.
Link: https://lore.kernel.org/linux-usb/2167ea48-e273-a336-a4e0-10a4e883e75e@redhat.com/
Cc: stable <stable@vger.kernel.org>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Link: https://lore.kernel.org/r/20210913181454.7365-1-belegdol+github@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Fri, 17 Sep 2021 11:57:36 +0000 (13:57 +0200)]
misc: bcm-vk: fix tty registration race
Make sure to set the tty class-device driver data before registering the
tty to avoid having a racing open() dereference a NULL pointer.
Fixes:
91ca10d6fa07 ("misc: bcm-vk: add ttyVK support")
Cc: stable@vger.kernel.org # 5.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917115736.5816-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Murphy [Fri, 17 Sep 2021 14:59:30 +0000 (15:59 +0100)]
arm64: Mitigate MTE issues with str{n}cmp()
As with strlen(), the patches importing the updated str{n}cmp()
implementations were originally developed and tested before the
advent of CONFIG_KASAN_HW_TAGS, and have subsequently revealed
not to be MTE-safe. Since in-kernel MTE is still a rather niche
case, let it temporarily fall back to the generic C versions for
correctness until we can figure out the best fix.
Fixes:
758602c04409 ("arm64: Import latest version of Cortex Strings' strcmp")
Fixes:
020b199bc70d ("arm64: Import latest version of Cortex Strings' strncmp")
Cc: <stable@vger.kernel.org> # 5.14.x
Reported-by: Branislav Rankov <branislav.rankov@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/34dc4d12eec0adae49b0ac927df642ed10089d40.1631890770.git.robin.murphy@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tobias Jakobi [Tue, 21 Sep 2021 10:07:02 +0000 (12:07 +0200)]
platform/x86: gigabyte-wmi: add support for B550I Aorus Pro AX
Tested with a AMD Ryzen 7 5800X.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Thomas Weißschuh <thomas@weissschuh.net>
Link: https://lore.kernel.org/r/20210921100702.3838-1-tjakobi@math.uni-bielefeld.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
José Expósito [Mon, 20 Sep 2021 16:03:12 +0000 (18:03 +0200)]
platform/x86/intel: hid: Add DMI switches allow list
Some devices, even non convertible ones, can send incorrect
SW_TABLET_MODE reports.
Add an allow list and accept such reports only from devices in it.
Bug reported for Dell XPS 17 9710 on:
https://gitlab.freedesktop.org/libinput/libinput/-/issues/662
Reported-by: Tobias Gurtzick <magic@wizardtales.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Tobias Gurtzick <magic@wizardtales.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20210920160312.9787-1-jose.exposito89@gmail.com
[hdegoede@redhat.com: Check dmi_switches_auto_add_allow_list only once]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Randy Dunlap [Sat, 18 Sep 2021 04:48:29 +0000 (21:48 -0700)]
platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build error
When DELL_WMI=y, DELL_WMI_PRIVACY=y, and LEDS_TRIGGER_AUDIO=m, there
is a linker error since the LEDS trigger code is built as a loadable
module. This happens because DELL_WMI_PRIVACY is a bool that depends
on a tristate (LEDS_TRIGGER_AUDIO=m), which can be dangerous.
ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe':
dell-wmi-privacy.c:(.text+0x3df): undefined reference to `ledtrig_audio_get'
Fixes:
8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Perry Yuan <Perry.Yuan@dell.com>
Cc: Dell.Client.Kernel@dell.com
Cc: platform-driver-x86@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/20210918044829.19222-1-rdunlap@infradead.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
David S. Miller [Tue, 21 Sep 2021 12:52:16 +0000 (13:52 +0100)]
Merge branch 'dsa-devres'
Vladimir Oltean says:
====================
Fix mdiobus users with devres
Commit
ac3a68d56651 ("net: phy: don't abuse devres in
devm_mdiobus_register()") by Bartosz Golaszewski has introduced two
classes of potential bugs by making the devres callback of
devm_mdiobus_alloc stop calling mdiobus_unregister.
The exact buggy circumstances are presented in the individual commit
messages. I have searched the tree for other occurrences, but at the
moment:
- for issue (a) I have no concrete proof that other buses except SPI and
I2C suffer from it, and the only SPI or I2C device drivers that call
of_mdiobus_alloc are the DSA drivers that leave a NULL
ds->slave_mii_bus and a non-NULL ds->ops->phy_read, aka ksz9477,
ksz8795, lan9303_i2c, vsc73xx-spi.
- for issue (b), all drivers which call of_mdiobus_alloc either use
of_mdiobus_register too, or call mdiobus_unregister sometime within
the ->remove path.
Although at this point I've seen enough strangeness caused by this
"device_del during ->shutdown" that I'm just going to copy the SPI and
I2C subsystem maintainers to this patch series, to get their feedback
whether they've had reports about things like this before. I don't think
other buses behave in this way, it forces SPI and I2C devices to have to
protect themselves from a really strange set of issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 20 Sep 2021 21:42:09 +0000 (00:42 +0300)]
net: dsa: realtek: register the MDIO bus under devres
The Linux device model permits both the ->shutdown and ->remove driver
methods to get called during a shutdown procedure. Example: a DSA switch
which sits on an SPI bus, and the SPI bus driver calls this on its
->shutdown method:
spi_unregister_controller
-> device_for_each_child(&ctlr->dev, NULL, __unregister);
-> spi_unregister_device(to_spi_device(dev));
-> device_del(&spi->dev);
So this is a simple pattern which can theoretically appear on any bus,
although the only other buses on which I've been able to find it are
I2C:
i2c_del_adapter
-> device_for_each_child(&adap->dev, NULL, __unregister_client);
-> i2c_unregister_device(client);
-> device_unregister(&client->dev);
The implication of this pattern is that devices on these buses can be
unregistered after having been shut down. The drivers for these devices
might choose to return early either from ->remove or ->shutdown if the
other callback has already run once, and they might choose that the
->shutdown method should only perform a subset of the teardown done by
->remove (to avoid unnecessary delays when rebooting).
So in other words, the device driver may choose on ->remove to not
do anything (therefore to not unregister an MDIO bus it has registered
on ->probe), because this ->remove is actually triggered by the
device_shutdown path, and its ->shutdown method has already run and done
the minimally required cleanup.
This used to be fine until the blamed commit, but now, the following
BUG_ON triggers:
void mdiobus_free(struct mii_bus *bus)
{
/* For compatibility with error handling in drivers. */
if (bus->state == MDIOBUS_ALLOCATED) {
kfree(bus);
return;
}
BUG_ON(bus->state != MDIOBUS_UNREGISTERED);
bus->state = MDIOBUS_RELEASED;
put_device(&bus->dev);
}
In other words, there is an attempt to free an MDIO bus which was not
unregistered. The attempt to free it comes from the devres release
callbacks of the SPI device, which are executed after the device is
unregistered.
I'm not saying that the fact that MDIO buses allocated using devres
would automatically get unregistered wasn't strange. I'm just saying
that the commit didn't care about auditing existing call paths in the
kernel, and now, the following code sequences are potentially buggy:
(a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device
located on a bus that unregisters its children on shutdown. After
the blamed patch, either both the alloc and the register should use
devres, or none should.
(b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no
mdiobus_unregister at all in the remove path. After the blamed
patch, nobody unregisters the MDIO bus anymore, so this is even more
buggy than the previous case which needs a specific bus
configuration to be seen, this one is an unconditional bug.
In this case, the Realtek drivers fall under category (b). To solve it,
we can register the MDIO bus under devres too, which restores the
previous behavior.
Fixes:
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 20 Sep 2021 21:42:08 +0000 (00:42 +0300)]
net: dsa: don't allocate the slave_mii_bus using devres
The Linux device model permits both the ->shutdown and ->remove driver
methods to get called during a shutdown procedure. Example: a DSA switch
which sits on an SPI bus, and the SPI bus driver calls this on its
->shutdown method:
spi_unregister_controller
-> device_for_each_child(&ctlr->dev, NULL, __unregister);
-> spi_unregister_device(to_spi_device(dev));
-> device_del(&spi->dev);
So this is a simple pattern which can theoretically appear on any bus,
although the only other buses on which I've been able to find it are
I2C:
i2c_del_adapter
-> device_for_each_child(&adap->dev, NULL, __unregister_client);
-> i2c_unregister_device(client);
-> device_unregister(&client->dev);
The implication of this pattern is that devices on these buses can be
unregistered after having been shut down. The drivers for these devices
might choose to return early either from ->remove or ->shutdown if the
other callback has already run once, and they might choose that the
->shutdown method should only perform a subset of the teardown done by
->remove (to avoid unnecessary delays when rebooting).
So in other words, the device driver may choose on ->remove to not
do anything (therefore to not unregister an MDIO bus it has registered
on ->probe), because this ->remove is actually triggered by the
device_shutdown path, and its ->shutdown method has already run and done
the minimally required cleanup.
This used to be fine until the blamed commit, but now, the following
BUG_ON triggers:
void mdiobus_free(struct mii_bus *bus)
{
/* For compatibility with error handling in drivers. */
if (bus->state == MDIOBUS_ALLOCATED) {
kfree(bus);
return;
}
BUG_ON(bus->state != MDIOBUS_UNREGISTERED);
bus->state = MDIOBUS_RELEASED;
put_device(&bus->dev);
}
In other words, there is an attempt to free an MDIO bus which was not
unregistered. The attempt to free it comes from the devres release
callbacks of the SPI device, which are executed after the device is
unregistered.
I'm not saying that the fact that MDIO buses allocated using devres
would automatically get unregistered wasn't strange. I'm just saying
that the commit didn't care about auditing existing call paths in the
kernel, and now, the following code sequences are potentially buggy:
(a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device
located on a bus that unregisters its children on shutdown. After
the blamed patch, either both the alloc and the register should use
devres, or none should.
(b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no
mdiobus_unregister at all in the remove path. After the blamed
patch, nobody unregisters the MDIO bus anymore, so this is even more
buggy than the previous case which needs a specific bus
configuration to be seen, this one is an unconditional bug.
In this case, DSA falls into category (a), it tries to be helpful and
registers an MDIO bus on behalf of the switch, which might be on such a
bus. I've no idea why it does it under devres.
It does this on probe:
if (!ds->slave_mii_bus && ds->ops->phy_read)
alloc and register mdio bus
and this on remove:
if (ds->slave_mii_bus && ds->ops->phy_read)
unregister mdio bus
I _could_ imagine using devres because the condition used on remove is
different than the condition used on probe. So strictly speaking, DSA
cannot determine whether the ds->slave_mii_bus it sees on remove is the
ds->slave_mii_bus that _it_ has allocated on probe. Using devres would
have solved that problem. But nonetheless, the existing code already
proceeds to unregister the MDIO bus, even though it might be
unregistering an MDIO bus it has never registered. So I can only guess
that no driver that implements ds->ops->phy_read also allocates and
registers ds->slave_mii_bus itself.
So in that case, if unregistering is fine, freeing must be fine too.
Stop using devres and free the MDIO bus manually. This will make devres
stop attempting to free a still registered MDIO bus on ->shutdown.
Fixes:
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Collingbourne [Wed, 15 Sep 2021 19:03:35 +0000 (12:03 -0700)]
arm64: add MTE supported check to thread switching and syscall entry/exit
This lets us avoid doing unnecessary work on hardware that does not
support MTE, and will allow us to freely use MTE instructions in the
code called by mte_thread_switch().
Since this would mean that we do a redundant check in
mte_check_tfsr_el1(), remove it and add two checks now required in its
callers. This also avoids an unnecessary DSB+ISB sequence on the syscall
exit path for hardware not supporting MTE.
Fixes:
65812c6921cc ("arm64: mte: Enable async tag check fault")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/I02fd000d1ef2c86c7d2952a7f099b254ec227a5d
Link: https://lore.kernel.org/r/20210915190336.398390-1-pcc@google.com
[catalin.marinas@arm.com: adjust the commit log slightly]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Chris Wilson [Mon, 9 Aug 2021 19:48:05 +0000 (12:48 -0700)]
drm/i915: Free all DMC payloads
Free all the DMC payloads, not just DMC_MAIN.
unreferenced object 0xffff88ff32d4d800 (size 1024):
comm "kworker/1:5", pid 701, jiffies
4294904239 (age 109.736s)
hex dump (first 32 bytes):
40 40 00 0c 03 00 00 00 00 00 00 00 00 00 00 00 @@..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000ba9d0d95>] dmc_load_work_fn+0x34d/0x510 [i915]
[<
000000001049fcab>] process_one_work+0x261/0x550
[<
00000000eeb995ac>] worker_thread+0x49/0x3c0
[<
0000000021031dc3>] kthread+0x10b/0x140
[<
000000004a0f69ee>] ret_from_fork+0x1f/0x30
unreferenced object 0xffff88ff0bde4000 (size 1024):
comm "kworker/0:3", pid 708, jiffies
4294904469 (age 108.816s)
hex dump (first 32 bytes):
40 40 00 0c 01 00 00 00 00 00 00 00 00 00 00 00 @@..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000ba9d0d95>] dmc_load_work_fn+0x34d/0x510 [i915]
[<
000000001049fcab>] process_one_work+0x261/0x550
[<
00000000eeb995ac>] worker_thread+0x49/0x3c0
[<
0000000021031dc3>] kthread+0x10b/0x140
[<
000000004a0f69ee>] ret_from_fork+0x1f/0x30
Fixes:
3d5928a168a9 ("drm/i915/xelpd: Pipe A DMC plugging")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210809194805.3793060-1-lucas.demarchi@intel.com
(cherry picked from commit
064b877dff4252ced91a1c8b1f129073f2991f6e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Maarten Lankhorst [Mon, 30 Aug 2021 12:09:48 +0000 (14:09 +0200)]
drm/i915: Move __i915_gem_free_object to ttm_bo_destroy
When we implement delayed destroy, we may have a second
call to the delete_mem_notify() handler, while free_object()
only should be called once.
Move it to bo->destroy(), to ensure it's only called once.
This fixes some weird memory corruption issues with delayed
destroy when async eviction is used.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210830121006.2978297-2-maarten.lankhorst@linux.intel.com
Fixes:
213d50927763 ("drm/i915/ttm: Introduce a TTM i915 gem object backend")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
(cherry picked from commit
48b0961269546716c3232748bf37e64e49fb866c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Radhakrishna Sripada [Tue, 14 Sep 2021 22:07:44 +0000 (15:07 -0700)]
drm/i915: Update memory bandwidth parameters
Earlier while calculating derated bw we would use 90% of the calculated
bw. Starting ADL-P we use a non standard derating. Updating the formulae
to reflect the same.
Bspec: 64631
v2: Use the new derating value only for ADL-P(MattR)
Fixes:
4d32fe2f14a7 ("drm/i915/adl_p: Update memory bandwidth parameters")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914220744.16042-1-radhakrishna.sripada@intel.com
(cherry picked from commit
f6d66fc8cf5f673ea76407be84dc17dbb3eda108)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Masanari Iida [Tue, 21 Sep 2021 06:41:23 +0000 (15:41 +0900)]
Doc: networking: Fox a typo in ice.rst
This patch fixes a spelling typo in ice.rst
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 20 Sep 2021 22:49:18 +0000 (01:49 +0300)]
net: dsa: fix dsa_tree_setup error path
Since the blamed commit, dsa_tree_teardown_switches() was split into two
smaller functions, dsa_tree_teardown_switches and dsa_tree_teardown_ports.
However, the error path of dsa_tree_setup stopped calling dsa_tree_teardown_ports.
Fixes:
a57d8c217aad ("net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 21 Sep 2021 09:54:17 +0000 (10:54 +0100)]
Merge branch 'smc-fixes'
Karsten Graul says:
====================
net/smc: fixes 2021-09-20
Please apply the following patches for smc to netdev's net tree.
The first patch adds a missing error check, and the second patch
fixes a possible leak of a lock in a worker.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Karsten Graul [Mon, 20 Sep 2021 19:18:15 +0000 (21:18 +0200)]
net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work
The abort_work is scheduled when a connection was detected to be
out-of-sync after a link failure. The work calls smc_conn_kill(),
which calls smc_close_active_abort() and that might end up calling
smc_close_cancel_work().
smc_close_cancel_work() cancels any pending close_work and tx_work but
needs to release the sock_lock before and acquires the sock_lock again
afterwards. So when the sock_lock was NOT acquired before then it may
be held after the abort_work completes. Thats why the sock_lock is
acquired before the call to smc_conn_kill() in __smc_lgr_terminate(),
but this is missing in smc_conn_abort_work().
Fix that by acquiring the sock_lock first and release it after the
call to smc_conn_kill().
Fixes:
b286a0651e44 ("net/smc: handle incoming CDC validation message")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>