media: i2c: imx477: Add very long exposure control to the driver

Add support for very long exposures by using the exposure multiplier
register. Userland does not need to pass any additional controls to
enable long exposures, it simply requests a larger vblank to extend the
exposure control range appropriately.

Currently, since hblank is fixed, a maximum of approximately 124 seconds
of exposure time can be used. In a future change, hblank could also be
controlled in userland to give over 200 seconds of exposure time.

Signed-off-by: Naushir Patuck <naush@raspberrypi.com>

media: i2c: imx477: Remove auto frame length adjusting

The V4L2_CID_EXPOSURE_AUTO_PRIORITY was used to let the sensor control
frame length (effectively framerate) based on the requested exposure
time requested. Remove this feature as it is never used, and goes
against how V4L2 likes to handle exposure and vblank controls.

Signed-off-by: Naushir Patuck <naush@raspberrypi.com>

configs: Add various missing IPV6 modules

See: https://github.com/raspberrypi/linux/issues/4144

(from https://github.com/RPi-Distro/repo/issues/229)

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

overlays: fsm-demo: Ensure all LEDs are turned off

If the shutdown process is delayed enough to trigger the shutdown
timeout then one or more states in the shutdown sequence might be
skipped. Ensure that all LEDs are turned off regardless by explicitly
doing so in the shutdown state, as an example of good practices.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

gpio-fsm: Fix shutdown timeout handling

The driver is intended to jump directly to a shutdown state in the
event of a timeout during shutdown, but the sense of the test was
inverted.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

gpio-fsm: Show state info in /sys/class/gpio-fsm

Add gpio-fsm sysfs entries under /sys/class/gpio-fsm. For each state
machine show the current state, which state (if any) will be entered
after a delay, and the current value of that delay.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

drm/vc4: Change the default DPI format to being 18bpp, not 24.

DPI hasn't really been used up until now, so the default has
been meaningless.
In theory we should be able to pass the desired format for the
adjacent bridge chip through, but framework seems to be missing
for that.

As the main device to use DPI is the VGA666 or Adafruit Kippah,
both of which use RGB666, change the default to being RGB666 instead
of RGB888.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

dtoverlays: Add an overlay for the VGA666 when used with vc4-kms-v3d

Includes optional use of GPIOs 0&1 / BSC0 for DDC to read the EDID
from the display.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

defconfigs: Add DRM_DISPLAY_CONNECTOR and DRM_SIMPLE_BRIDGE for VGA666

VGA666 uses "vga-connector" from DRM_DISPLAY_CONNECTOR, and
"dumb-vga-dac" from DRM_SIMPLE_BRIDGE to connect up, so add them
to the defconfigs.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

dt: Add option for dpi without DE and PCLK (for VGA666)

VGA666 doesn't use the DE or PCLK signals, therefore there is
no point in claiming their use. It's also then possible to
use GPIOs 0&1 for DDC to read the EDID from the display.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

staging: rpivid: Fix crash when CMA alloc fails

If realloc to increase coeff size fails then attempt to re-allocate
the original size.  If that also fails then flag a fatal error to abort
all further decode.

Signed-off-by: John Cox <jc@kynesim.co.uk>

Merge remote-tracking branch 'stable/linux-5.10.y' into rpi-5.10.y

drm/vc4: Add connector check to trigger mode_change when hdr metadata changes

Signed-off-by: Dom Cobley <popcornmix@gmail.com>

drm/vc4: Add HDR metadata property to the VC5 HDMI connectors

Now that we can export deeper colour depths, add in the signalling
for HDR metadata.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

drm: fix HDR static metadata type field numbering

According to CTA-861 specification, HDR static metadata data block allows a
sink to indicate which HDR metadata types it supports by setting the SM_0 to
SM_7 bits. Currently, only Static Metadata Type 1 is supported and this is
indicated by setting the SM_0 bit to 1.

However, the connector->hdr_sink_metadata.hdmi_type1.metadata_type is always
0, because hdr_metadata_type() in drm_edid.c checks the wrong bit.

This patch corrects the HDMI_STATIC_METADATA_TYPE1 bit position.

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>

overlays: Rename gpio-fsm property num-soft-gpios

The gpio-fsm property "num-soft-gpios" triggers a kernel DT checker
that warns about the lack of #gpio-cells on a random node with the
phandle that just happens to match the number of soft GPIOs. Rename
the property to "num-swgpios" to avoid the warning.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

gpio-fsm: Rename 'num-soft-gpios' to avoid warning

As of 5.10, the Device Tree parser warns about properties that look
like references to "suppliers" of various services. "num-soft-gpios"
resembles a declaration of a GPIO called "num-soft", causing the value
to be interpreted as a phandle, the owner of which is checked for a
"#gpio-cells" property.

To avoid this warning, rename the gpio-fsm property to "num-swgpios".

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Linux 5.10.16

Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Ross Schmidt <ross.schm.dev@gmail.com>
Link: https://lore.kernel.org/r/20210211150152.885701259@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

squashfs: add more sanity checks in xattr id lookup

commit 506220d2ba21791314af569211ffd8870b8208fa upstream.

Sysbot has reported a warning where a kmalloc() attempt exceeds the
maximum limit.  This has been identified as corruption of the xattr_ids
count when reading the xattr id lookup table.

This patch adds a number of additional sanity checks to detect this
corruption and others.

1. It checks for a corrupted xattr index read from the inode.  This could
   be because the metadata block is uncompressed, or because the
   "compression" bit has been corrupted (turning a compressed block
   into an uncompressed block).  This would cause an out of bounds read.

2. It checks against corruption of the xattr_ids count.  This can either
   lead to the above kmalloc failure, or a smaller than expected
   table to be read.

3. It checks the contents of the index table for corruption.

[phillip@squashfs.org.uk: fix checkpatch issue]
Link: https://lkml.kernel.org/r/270245655.754655.1612770082682@webmail.123-reg.co.uk
Link: https://lkml.kernel.org/r/20210204130249.4495-5-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+2ccea6339d368360800d@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

squashfs: add more sanity checks in inode lookup

commit eabac19e40c095543def79cb6ffeb3a8588aaff4 upstream.

Sysbot has reported an "slab-out-of-bounds read" error which has been
identified as being caused by a corrupted "ino_num" value read from the
inode.  This could be because the metadata block is uncompressed, or
because the "compression" bit has been corrupted (turning a compressed
block into an uncompressed block).

This patch adds additional sanity checks to detect this, and the
following corruption.

1. It checks against corruption of the inodes count.  This can either
   lead to a larger table to be read, or a smaller than expected
   table to be read.

   In the case of a too large inodes count, this would often have been
   trapped by the existing sanity checks, but this patch introduces
   a more exact check, which can identify too small values.

2. It checks the contents of the index table for corruption.

[phillip@squashfs.org.uk: fix checkpatch issue]
Link: https://lkml.kernel.org/r/527909353.754618.1612769948607@webmail.123-reg.co.uk
Link: https://lkml.kernel.org/r/20210204130249.4495-4-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+04419e3ff19d2970ea28@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

squashfs: add more sanity checks in id lookup

commit f37aa4c7366e23f91b81d00bafd6a7ab54e4a381 upstream.

Sysbot has reported a number of "slab-out-of-bounds reads" and
"use-after-free read" errors which has been identified as being caused
by a corrupted index value read from the inode.  This could be because
the metadata block is uncompressed, or because the "compression" bit has
been corrupted (turning a compressed block into an uncompressed block).

This patch adds additional sanity checks to detect this, and the
following corruption.

1. It checks against corruption of the ids count.  This can either
   lead to a larger table to be read, or a smaller than expected
   table to be read.

   In the case of a too large ids count, this would often have been
   trapped by the existing sanity checks, but this patch introduces
   a more exact check, which can identify too small values.

2. It checks the contents of the index table for corruption.

Link: https://lkml.kernel.org/r/20210204130249.4495-3-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+b06d57ba83f604522af2@syzkaller.appspotmail.com
Reported-by: syzbot+c021ba012da41ee9807c@syzkaller.appspotmail.com
Reported-by: syzbot+5024636e8b5fd19f0f19@syzkaller.appspotmail.com
Reported-by: syzbot+bcbc661df46657d0fa4f@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

squashfs: avoid out of bounds writes in decompressors

commit e812cbbbbbb15adbbbee176baa1e8bda53059bf0 upstream.

Patch series "Squashfs: fix BIO migration regression and add sanity checks".

Patch [1/4] fixes a regression introduced by the "migrate from
ll_rw_block usage to BIO" patch, which has produced a number of
Sysbot/Syzkaller reports.

Patches [2/4], [3/4], and [4/4] fix a number of filesystem corruption
issues which have produced Sysbot reports in the id, inode and xattr
lookup code.

Each patch has been tested against the Sysbot reproducers using the
given kernel configuration.  They have the appropriate "Reported-by:"
lines added.

Additionally, all of the reproducer filesystems are indirectly fixed by
patch [4/4] due to the fact they all have xattr corruption which is now
detected there.

Additional testing with other configurations and architectures (32bit,
big endian), and normal filesystems has also been done to trap any
inadvertent regressions caused by the additional sanity checks.

This patch (of 4):

This is a regression introduced by the patch "migrate from ll_rw_block
usage to BIO".

Sysbot/Syskaller has reported a number of "out of bounds writes" and
"unable to handle kernel paging request in squashfs_decompress" errors
which have been identified as a regression introduced by the above
patch.

Specifically, the patch removed the following sanity check

        if (length < 0 || length > output->length ||
(index + length) > msblk->bytes_used)

This check did two things:

1. It ensured any reads were not beyond the end of the filesystem

2. It ensured that the "length" field read from the filesystem
   was within the expected maximum length.  Without this any
   corrupted values can over-run allocated buffers.

Link: https://lkml.kernel.org/r/20210204130249.4495-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20210204130249.4495-2-phillip@squashfs.org.uk
Fixes: 93e72b3c612adc ("squashfs: migrate from ll_rw_block usage to BIO")
Reported-by: syzbot+6fba78f99b9afd4b5634@syzkaller.appspotmail.com
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Philippe Liard <pliard@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "mm: memcontrol: avoid workload stalls when lowering memory.high"

commit e82553c10b0899994153f9bf0af333c0a1550fd7 upstream.

This reverts commit 536d3bf261a2fc3b05b3e91e7eef7383443015cf, as it can
cause writers to memory.high to get stuck in the kernel forever,
performing page reclaim and consuming excessive amounts of CPU cycles.

Before the patch, a write to memory.high would first put the new limit
in place for the workload, and then reclaim the requested delta.  After
the patch, the kernel tries to reclaim the delta before putting the new
limit into place, in order to not overwhelm the workload with a sudden,
large excess over the limit.  However, if reclaim is actively racing
with new allocations from the uncurbed workload, it can keep the write()
working inside the kernel indefinitely.

This is causing problems in Facebook production.  A privileged
system-level daemon that adjusts memory.high for various workloads
running on a host can get unexpectedly stuck in the kernel and
essentially turn into a sort of involuntary kswapd for one of the
workloads.  We've observed that daemon busy-spin in a write() for
minutes at a time, neglecting its other duties on the system, and
expending privileged system resources on behalf of a workload.

To remedy this, we have first considered changing the reclaim logic to
break out after a couple of loops - whether the workload has converged
to the new limit or not - and bound the write() call this way.  However,
the root cause that inspired the sequence change in the first place has
been fixed through other means, and so a revert back to the proven
limit-setting sequence, also used by memory.max, is preferable.

The sequence was changed to avoid extreme latencies in the workload when
the limit was lowered: the sudden, large excess created by the limit
lowering would erroneously trigger the penalty sleeping code that is
meant to throttle excessive growth from below.  Allocating threads could
end up sleeping long after the write() had already reclaimed the delta
for which they were being punished.

However, erroneous throttling also caused problems in other scenarios at
around the same time.  This resulted in commit b3ff92916af3 ("mm, memcg:
reclaim more aggressively before high allocator throttling"), included
in the same release as the offending commit.  When allocating threads
now encounter large excess caused by a racing write() to memory.high,
instead of entering punitive sleeps, they will simply be tasked with
helping reclaim down the excess, and will be held no longer than it
takes to accomplish that.  This is in line with regular limit
enforcement - i.e.  if the workload allocates up against or over an
otherwise unchanged limit from below.

With the patch breaking userspace, and the root cause addressed by other
means already, revert it again.

Link: https://lkml.kernel.org/r/20210122184341.292461-1-hannes@cmpxchg.org
Fixes: 536d3bf261a2 ("mm: memcontrol: avoid workload stalls when lowering memory.high")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: make splice write available again

commit a35d8f016e0b68634035217d06d1c53863456b50 upstream.

Since 5.10, splice() or sendfile() to NILFS2 return EINVAL.  This was
caused by commit 36e2c7421f02 ("fs: don't allow splice read/write
without explicit ops").

This patch initializes the splice_write field in file_operations, like
most file systems do, to restore the functionality.

Link: https://lkml.kernel.org/r/1612784101-14353-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Joachim Henke <joachim.henke@t-systems.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Skip vswing programming for TBT

commit eaf5bfe37db871031232d2bf2535b6ca92afbad8 upstream.

In thunderbolt mode the PHY is owned by the thunderbolt controller.
We are not supposed to touch it. So skip the vswing programming
as well (we already skipped the other steps not applicable to TBT).

Touching this stuff could supposedly interfere with the PHY
programming done by the thunderbolt controller.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit f8c6b615b921d8a1bcd74870f9105e62b0bceff3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix ICL MG PHY vswing handling

commit a2a5f5628e5494ca9353f761f7fe783dfa82fb9a upstream.

The MH PHY vswing table does have all the entries these days. Get
rid of the old hacks in the code which claim otherwise.

This hack was totally bogus anyway. The correct way to handle the
lack of those two entries would have been to declare our max
vswing and pre-emph to both be level 2.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Fixes: 9f7ffa297978 ("drm/i915/tc/icl: Update TC vswing tables")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201207203512.1718-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 5ec346476e795089b7dac8ab9dcee30c8d80ad84)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix verifier jsgt branch analysis on max bound

commit ee114dd64c0071500345439fc79dd5e0f9d106ed upstream.

Fix incorrect is_branch{32,64}_taken() analysis for the jsgt case. The return
code for both will tell the caller whether a given conditional jump is taken
or not, e.g. 1 means branch will be taken [for the involved registers] and the
goto target will be executed, 0 means branch will not be taken and instead we
fall-through to the next insn, and last but not least a -1 denotes that it is
not known at verification time whether a branch will be taken or not. Now while
the jsgt has the branch-taken case correct with reg->s32_min_value > sval, the
branch-not-taken case is off-by-one when testing for reg->s32_max_value < sval
since the branch will also be taken for reg->s32_max_value == sval. The jgt
branch analysis, for example, gets this right.

Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Fixes: 4f7b3e82589e ("bpf: improve verifier branch analysis")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix 32 bit src register truncation on div/mod

commit e88b2c6e5a4d9ce30d75391e4d950da74bb2bd90 upstream.

While reviewing a different fix, John and I noticed an oddity in one of the
BPF program dumps that stood out, for example:

  # bpftool p d x i 13
   0: (b7) r0 = 808464450
   1: (b4) w4 = 808464432
   2: (bc) w0 = w0
   3: (15) if r0 == 0x0 goto pc+1
   4: (9c) w4 %= w0
  [...]

In line 2 we noticed that the mov32 would 32 bit truncate the original src
register for the div/mod operation. While for the two operations the dst
register is typically marked unknown e.g. from adjust_scalar_min_max_vals()
the src register is not, and thus verifier keeps tracking original bounds,
simplified:

  0: R1=ctx(id=0,off=0,imm=0) R10=fp0
  0: (b7) r0 = -1
  1: R0_w=invP-1 R1=ctx(id=0,off=0,imm=0) R10=fp0
  1: (b7) r1 = -1
  2: R0_w=invP-1 R1_w=invP-1 R10=fp0
  2: (3c) w0 /= w1
  3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP-1 R10=fp0
  3: (77) r1 >>= 32
  4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP4294967295 R10=fp0
  4: (bf) r0 = r1
  5: R0_w=invP4294967295 R1_w=invP4294967295 R10=fp0
  5: (95) exit
  processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0

Runtime result of r0 at exit is 0 instead of expected -1. Remove the
verifier mov32 src rewrite in div/mod and replace it with a jmp32 test
instead. After the fix, we result in the following code generation when
having dividend r1 and divisor r6:

  div, 64 bit:                             div, 32 bit:

   0: (b7) r6 = 8                           0: (b7) r6 = 8
   1: (b7) r1 = 8                           1: (b7) r1 = 8
   2: (55) if r6 != 0x0 goto pc+2           2: (56) if w6 != 0x0 goto pc+2
   3: (ac) w1 ^= w1                         3: (ac) w1 ^= w1
   4: (05) goto pc+1                        4: (05) goto pc+1
   5: (3f) r1 /= r6                         5: (3c) w1 /= w6
   6: (b7) r0 = 0                           6: (b7) r0 = 0
   7: (95) exit                             7: (95) exit

  mod, 64 bit:                             mod, 32 bit:

   0: (b7) r6 = 8                           0: (b7) r6 = 8
   1: (b7) r1 = 8                           1: (b7) r1 = 8
   2: (15) if r6 == 0x0 goto pc+1           2: (16) if w6 == 0x0 goto pc+1
   3: (9f) r1 %= r6                         3: (9c) w1 %= w6
   4: (b7) r0 = 0                           4: (b7) r0 = 0
   5: (95) exit                             5: (95) exit

x86 in particular can throw a 'divide error' exception for div
instruction not only for divisor being zero, but also for the case
when the quotient is too large for the designated register. For the
edx:eax and rdx:rax dividend pair it is not an issue in x86 BPF JIT
since we always zero edx (rdx). Hence really the only protection
needed is against divisor being zero.

Fixes: 68fda450a7df ("bpf: fix 32-bit divide by zero")
Co-developed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix verifier jmp32 pruning decision logic

commit fd675184fc7abfd1e1c52d23e8e900676b5a1c1a upstream.

Anatoly has been fuzzing with kBdysch harness and reported a hang in
one of the outcomes:

  func#0 @0
  0: R1=ctx(id=0,off=0,imm=0) R10=fp0
  0: (b7) r0 = 808464450
  1: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R10=fp0
  1: (b4) w4 = 808464432
  2: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP808464432 R10=fp0
  2: (9c) w4 %= w0
  3: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
  3: (66) if w4 s> 0x30303030 goto pc+0
   R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0
  4: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0
  4: (7f) r0 >>= r0
  5: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0
  5: (9c) w4 %= w0
  6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  6: (66) if w0 s> 0x3030 goto pc+0
   R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  7: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
  7: (d6) if w0 s<= 0x303030 goto pc+1
  9: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
  9: (95) exit
  propagating r0

  from 6 to 7: safe
  4: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umin_value=808464433,umax_value=2147483647,var_off=(0x0; 0x7fffffff)) R10=fp0
  4: (7f) r0 >>= r0
  5: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umin_value=808464433,umax_value=2147483647,var_off=(0x0; 0x7fffffff)) R10=fp0
  5: (9c) w4 %= w0
  6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  6: (66) if w0 s> 0x3030 goto pc+0
   R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  propagating r0
  7: safe
  propagating r0

  from 6 to 7: safe
  processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1

The underlying program was xlated as follows:

  # bpftool p d x i 10
   0: (b7) r0 = 808464450
   1: (b4) w4 = 808464432
   2: (bc) w0 = w0
   3: (15) if r0 == 0x0 goto pc+1
   4: (9c) w4 %= w0
   5: (66) if w4 s> 0x30303030 goto pc+0
   6: (7f) r0 >>= r0
   7: (bc) w0 = w0
   8: (15) if r0 == 0x0 goto pc+1
   9: (9c) w4 %= w0
  10: (66) if w0 s> 0x3030 goto pc+0
  11: (d6) if w0 s<= 0x303030 goto pc+1
  12: (05) goto pc-1
  13: (95) exit

The verifier rewrote original instructions it recognized as dead code with
'goto pc-1', but reality differs from verifier simulation in that we are
actually able to trigger a hang due to hitting the 'goto pc-1' instructions.

Taking a closer look at the verifier analysis, the reason is that it misjudges
its pruning decision at the first 'from 6 to 7: safe' occasion. What happens
is that while both old/cur registers are marked as precise, they get misjudged
for the jmp32 case as range_within() yields true, meaning that the prior
verification path with a wider register bound could be verified successfully
and therefore the current path with a narrower register bound is deemed safe
as well whereas in reality it's not. R0 old/cur path's bounds compare as
follows:

  old: smin_value=0x8000000000000000,smax_value=0x7fffffffffffffff,umin_value=0x0,umax_value=0xffffffffffffffff,var_off=(0x0; 0xffffffffffffffff)
  cur: smin_value=0x8000000000000000,smax_value=0x7fffffff7fffffff,umin_value=0x0,umax_value=0xffffffff7fffffff,var_off=(0x0; 0xffffffff7fffffff)

  old: s32_min_value=0x80000000,s32_max_value=0x00003030,u32_min_value=0x00000000,u32_max_value=0xffffffff
  cur: s32_min_value=0x00003031,s32_max_value=0x7fffffff,u32_min_value=0x00003031,u32_max_value=0x7fffffff

The 64 bit bounds generally look okay and while the information that got
propagated from 32 to 64 bit looks correct as well, it's not precise enough
for judging a conditional jmp32. Given the latter only operates on subregisters
we also need to take these into account as well for a range_within() probe
in order to be able to prune paths. Extending the range_within() constraint
to both bounds will be able to tell us that the old signed 32 bit bounds are
not wider than the cur signed 32 bit bounds.

With the fix in place, the program will now verify the 'goto' branch case as
it should have been:

  [...]
  6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  6: (66) if w0 s> 0x3030 goto pc+0
   R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  7: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
  7: (d6) if w0 s<= 0x303030 goto pc+1
  9: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
  9: (95) exit

  7: R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=12337,u32_min_value=12337,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  7: (d6) if w0 s<= 0x303030 goto pc+1
   R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=3158065,u32_min_value=3158065,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  8: R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=3158065,u32_min_value=3158065,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  8: (30) r0 = *(u8 *)skb[808464432]
  BPF_LD_[ABS|IND] uses reserved fields
  processed 11 insns (limit 1000000) max_states_per_insn 1 total_states 1 peak_states 1 mark_read 1

The bug is quite subtle in the sense that when verifier would determine that
a given branch is dead code, it would (here: wrongly) remove these instructions
from the program and hard-wire the taken branch for privileged programs instead
of the 'goto pc-1' rewrites which will cause hard to debug problems.

Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: Fix lockdep warning resolving supplies

[ Upstream commit 14a71d509ac809dcf56d7e3ca376b15d17bd0ddd ]

With commit eaa7995c529b54 (regulator: core: avoid
regulator_resolve_supply() race condition) we started holding the rdev
lock while resolving supplies, an operation that requires holding the
regulator_list_mutex. This results in lockdep warnings since in other
places we take the list mutex then the mutex on an individual rdev.

Since the goal is to make sure that we don't call set_supply() twice
rather than a concern about the cost of resolution pull the rdev lock
and check for duplicate resolution down to immediately before we do the
set_supply() and drop it again once the allocation is done.

Fixes: eaa7995c529b54 (regulator: core: avoid regulator_resolve_supply() race condition)
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210122132042.10306-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-cgroup: Use cond_resched() when destroy blkgs

[ Upstream commit 6c635caef410aa757befbd8857c1eadde5cc22ed ]

On !PREEMPT kernel, we can get below softlockup when doing stress
testing with creating and destroying block cgroup repeatly. The
reason is it may take a long time to acquire the queue's lock in
the loop of blkcg_destroy_blkgs(), or the system can accumulate a
huge number of blkgs in pathological cases. We can add a need_resched()
check on each loop and release locks and do cond_resched() if true
to avoid this issue, since the blkcg_destroy_blkgs() is not called
from atomic contexts.

[ 4757.010308] watchdog: BUG: soft lockup - CPU#11 stuck for 94s!
[ 4757.010698] Call trace:
[ 4757.010700]  blkcg_destroy_blkgs+0x68/0x150
[ 4757.010701]  cgwb_release_workfn+0x104/0x158
[ 4757.010702]  process_one_work+0x1bc/0x3f0
[ 4757.010704]  worker_thread+0x164/0x468
[ 4757.010705]  kthread+0x108/0x138

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: mediatek: Move suspend and resume handling to NOIRQ phase

[ Upstream commit de96c3943f591018727b862f51953c1b6c55bcc3 ]

Some i2c device driver indirectly uses I2C driver when it is now
being suspended. The i2c devices driver is suspended during the
NOIRQ phase and this cannot be changed due to other dependencies.
Therefore, we also need to move the suspend handling for the I2C
controller driver to the NOIRQ phase as well.

Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Handle 0 length opaque XDR object data properly

[ Upstream commit e4a7d1f7707eb44fd953a31dd59eff82009d879c ]

When handling an auth_gss downcall, it's possible to get 0-length
opaque object for the acceptor.  In the case of a 0-length XDR
object, make sure simple_get_netobj() fills in dest->data = NULL,
and does not continue to kmemdup() which will set
dest->data = ZERO_SIZE_PTR for the acceptor.

The trace event code can handle NULL but not ZERO_SIZE_PTR for a
string, and so without this patch the rpcgss_context trace event
will crash the kernel as follows:

[  162.887992] BUG: kernel NULL pointer dereference, address: 0000000000000010
[  162.898693] #PF: supervisor read access in kernel mode
[  162.900830] #PF: error_code(0x0000) - not-present page
[  162.902940] PGD 0 P4D 0
[  162.904027] Oops: 0000 [#1] SMP PTI
[  162.905493] CPU: 4 PID: 4321 Comm: rpc.gssd Kdump: loaded Not tainted 5.10.0 #133
[  162.908548] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  162.910978] RIP: 0010:strlen+0x0/0x20
[  162.912505] Code: 48 89 f9 74 09 48 83 c1 01 80 39 00 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee c3 0f 1f 80 00 00 00 00 <80> 3f 00 74 10 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 31
[  162.920101] RSP: 0018:ffffaec900c77d90 EFLAGS: 00010202
[  162.922263] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffde697
[  162.925158] RDX: 000000000000002f RSI: 0000000000000080 RDI: 0000000000000010
[  162.928073] RBP: 0000000000000010 R08: 0000000000000e10 R09: 0000000000000000
[  162.930976] R10: ffff8e698a590cb8 R11: 0000000000000001 R12: 0000000000000e10
[  162.933883] R13: 00000000fffde697 R14: 000000010034d517 R15: 0000000000070028
[  162.936777] FS:  00007f1e1eb93700(0000) GS:ffff8e6ab7d00000(0000) knlGS:0000000000000000
[  162.940067] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  162.942417] CR2: 0000000000000010 CR3: 0000000104eba000 CR4: 00000000000406e0
[  162.945300] Call Trace:
[  162.946428]  trace_event_raw_event_rpcgss_context+0x84/0x140 [auth_rpcgss]
[  162.949308]  ? __kmalloc_track_caller+0x35/0x5a0
[  162.951224]  ? gss_pipe_downcall+0x3a3/0x6a0 [auth_rpcgss]
[  162.953484]  gss_pipe_downcall+0x585/0x6a0 [auth_rpcgss]
[  162.955953]  rpc_pipe_write+0x58/0x70 [sunrpc]
[  162.957849]  vfs_write+0xcb/0x2c0
[  162.959264]  ksys_write+0x68/0xe0
[  162.960706]  do_syscall_64+0x33/0x40
[  162.962238]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  162.964346] RIP: 0033:0x7f1e1f1e57df

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Move simple_get_bytes and simple_get_netobj into private header

[ Upstream commit ba6dfce47c4d002d96cd02a304132fca76981172 ]

Remove duplicated helper functions to parse opaque XDR objects
and place inside new file net/sunrpc/auth_gss/auth_gss_internal.h.
In the new file carry the license and copyright from the source file
net/sunrpc/auth_gss/auth_gss.c.  Finally, update the comment inside
include/linux/sunrpc/xdr.h since lockd is not the only user of
struct xdr_netobj.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: queue: bail out on invalid freeing

[ Upstream commit 0bed6a2a14afaae240cc431e49c260568488b51c ]

If we find an entry without an SKB, we currently continue, but
that will just result in an infinite loop since we won't increment
the read pointer, and will try the same thing over and over again.
Fix this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.abe2dedcc3ac.Ia6b03f9eeb617fd819e56dd5376f4bb8edc7b98a@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: guard against device removal in reprobe

[ Upstream commit 7a21b1d4a728a483f07c638ccd8610d4b4f12684 ]

If we get into a problem severe enough to attempt a reprobe,
we schedule a worker to do that. However, if the problem gets
more severe and the device is actually destroyed before this
worker has a chance to run, we use a free device. Bump up the
reference count of the device until the worker runs to avoid
this situation.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.871f0892e4b2.I94819e11afd68d875f3e242b98bef724b8236f1e@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: add rules to match Qu with Hr2

[ Upstream commit 16062c12edb8ed2dfb15e6a914ff4edf858ab9e0 ]

Until now we have been relying on matching the PCI ID and subsystem
device ID in order to recognize Qu devices with Hr2.  Add rules to
match these devices, so that we don't have to add a new rule for every
new ID we get.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.591ce253ddd8.Ia4b9cc2c535625890c6d6b560db97ee9f2d5ca3b@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: invalidate IDs of internal stations at mvm start

[ Upstream commit e223e42aac30bf81f9302c676cdf58cf2bf36950 ]

Having sta_id not set for aux_sta and snif_sta can potentially lead to a
hard to debug issue in case remove station is called without an add. In
this case sta_id 0, an unrelated regular station, will be removed.

In fact, we do have a FW assert that occures rarely and from the debug
data analysis it looks like sta_id 0 is removed by mistake, though it's
hard to pinpoint the exact flow. The WARN_ON in this patch should help
to find it.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5dc6dd9b22d5.I2add1b5ad24d0d0a221de79d439c09f88fcaf15d@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: fix context info memory leak

[ Upstream commit 2d6bc752cc2806366d9a4fd577b3f6c1f7a7e04e ]

If the image loader allocation fails, we leak all the previously
allocated memory. Fix this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.97172cbaa67c.I3473233d0ad01a71aa9400832fb2b9f494d88a11@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmap

[ Upstream commit 98c7d21f957b10d9c07a3a60a3a5a8f326a197e5 ]

I hit a NULL pointer exception in this function when the
init flow went really bad.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.2e8da9f2c132.I0234d4b8ddaf70aaa5028a20c863255e05bc1f84@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: take mutex for calling iwl_mvm_get_sync_time()

[ Upstream commit 5c56d862c749669d45c256f581eac4244be00d4d ]

We need to take the mutex to call iwl_mvm_get_sync_time(), do it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.4bb5ccf881a6.I62973cbb081e80aa5b0447a5c3b9c3251a65cf6b@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: skip power command when unbinding vif during CSA

[ Upstream commit bf544e9aa570034e094a8a40d5f9e1e2c4916d18 ]

In the new CSA flow, we remain associated during CSA, but
still do a unbind-bind to the vif. However, sending the power
command right after when vif is unbound but still associated
causes FW to assert (0x3400) since it cannot tell the LMAC id.

Just skip this command, we will send it again in a bit, when
assigning the new context.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.64a2254ac5c3.Iaa3a9050bf3d7c9cd5beaf561e932e6defc12ec3@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5E

[ Upstream commit 9ad9bc59dde106e56dd59ce2bec7c1b08e1f0eb4 ]

Add flag "SOF_RT711_JD_SRC_JD2", flag "SOF_RT715_DAI_ID_FIX"
and "SOF_SDW_FOUR_SPK" to the Dell TGL-H based SKU "0A5E".

Signed-off-by: Libin Yang <libin.yang@intel.com>
Co-developed-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210125081117.814488-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: ak4458: correct reset polarity

[ Upstream commit e953daeb68b1abd8a7d44902786349fdeef5c297 ]

Reset (aka power off) happens when the reset gpio is made active.
Change function name to ak4458_reset to match devicetree property "reset-gpios"

Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ce650f47-4ff6-e486-7846-cc3d033f3601@blennerhassett.gen.nz
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: intel-dsp-config: add PCI id for TGL-H

[ Upstream commit c5b5ff607d6fe5f4284acabd07066f96ecf96ac4 ]

Adding PCI id for TGL-H. Like for other TGL platforms, SOF is used if
Soundwire codecs or PCH-DMIC is detected.

Signed-off-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Xiuli Pan <xiuli.pan@intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210125083051.828205-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pNFS/NFSv4: Improve rejection of out-of-order layouts

[ Upstream commit d29b468da4f940bd2bff2628ba8d2d652671d244 ]

If a layoutget ends up being reordered w.r.t. a layoutreturn, e.g. due
to a layoutget-on-open not knowing a priori which file to lock, then we
must assume the layout is no longer being considered valid state by the
server.
Incrementally improve our ability to reject such states by using the
cached old stateid in conjunction with the plh_barrier to try to
identify them.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()

[ Upstream commit 08bd8dbe88825760e953759d7ec212903a026c75 ]

If the server returns a new stateid that does not match the one in our
cache, then try to return the one we hold instead of just invalidating
it on the client side. This ensures that both client and server will
agree that the stateid is invalid.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

chtls: Fix potential resource leak

[ Upstream commit b6011966ac6f402847eb5326beee8da3a80405c7 ]

The dst entry should be released if no neighbour is found. Goto label
free_dst to fix the issue. Besides, the check of ndev against NULL is
redundant.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121145738.51091-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: Skylake: Zero snd_ctl_elem_value

[ Upstream commit 1d8fe0648e118fd495a2cb393a34eb8d428e7808 ]

Clear struct snd_ctl_elem_value before calling ->put() to avoid any data
leak.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210121171644.131059-2-ribalda@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: 160MHz with extended NSS BW in CSA

[ Upstream commit dcf3c8fb32ddbfa3b8227db38aa6746405bd4527 ]

Upon receiving CSA with 160MHz extended NSS BW from associated AP,
STA should set the HT operation_mode based on new_center_freq_seg1
because it is later used as ccfs2 in ieee80211_chandef_vht_oper().

Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com>
Signed-off-by: Shay Bar <shay.bar@celeno.com>
Link: https://lore.kernel.org/r/20201222064714.24888-1-shay.bar@celeno.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/nvif: fix method count when pushing an array

[ Upstream commit d502297008142645edf5c791af424ed321e5da84 ]

Reported-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm_adsp: Fix control name parsing for multi-fw

[ Upstream commit a8939f2e138e418c2b059056ff5b501eaf2eae54 ]

When switching between firmware types, the wrong control
can be selected when requesting control in kernel API.
Use the currently selected DSP firwmare type to select
the proper mixer control.

Signed-off-by: James Schulman <james.schulman@cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210115201105.14075-1-james.schulman@cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: avoid regulator_resolve_supply() race condition

[ Upstream commit eaa7995c529b54d68d97a30f6344cc6ca2f214a7 ]

The final step in regulator_register() is to call
regulator_resolve_supply() for each registered regulator
(including the one in the process of being registered).  The
regulator_resolve_supply() function first checks if rdev->supply
is NULL, then it performs various steps to try to find the supply.
If successful, rdev->supply is set inside of set_supply().

This procedure can encounter a race condition if two concurrent
tasks call regulator_register() near to each other on separate CPUs
and one of the regulators has rdev->supply_name specified.  There
is currently nothing guaranteeing atomicity between the rdev->supply
check and set steps.  Thus, both tasks can observe rdev->supply==NULL
in their regulator_resolve_supply() calls.  This then results in
both creating a struct regulator for the supply.  One ends up
actually stored in rdev->supply and the other is lost (though still
present in the supply's consumer_list).

Here is a kernel log snippet showing the issue:

[   12.421768] gpu_cc_gx_gdsc: supplied by pm8350_s5_level
[   12.425854] gpu_cc_gx_gdsc: supplied by pm8350_s5_level
[   12.429064] debugfs: Directory 'regulator.4-SUPPLY' with parent
               '17a00000.rsc:rpmh-regulator-gfxlvl-pm8350_s5_level'
               already present!

Avoid this race condition by holding the rdev->mutex lock inside
of regulator_resolve_supply() while checking and setting
rdev->supply.

Signed-off-by: David Collins <collinsd@codeaurora.org>
Link: https://lore.kernel.org/r/1610068562-4410-1-git-send-email-collinsd@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_key: relax availability checks for skb size calculation

[ Upstream commit afbc293add6466f8f3f0c3d944d85f53709c170f ]

xfrm_probe_algs() probes kernel crypto modules and changes the
availability of struct xfrm_algo_desc. But there is a small window
where ealg->available and aalg->available get changed between
count_ah_combs()/count_esp_combs() and dump_ah_combs()/dump_esp_combs(),
in this case we may allocate a smaller skb but later put a larger
amount of data and trigger the panic in skb_put().

Fix this by relaxing the checks when counting the size, that is,
skipping the test of ->available. We may waste some memory for a few
of sizeof(struct sadb_comb), but it is still much better than a panic.

Reported-by: syzbot+b2bf2652983d23734c5c@syzkaller.appspotmail.com
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64/signal: Fix regression in __kernel_sigtramp_rt64() semantics

commit 24321ac668e452a4942598533d267805f291fdc9 upstream.

Commit 0138ba5783ae ("powerpc/64/signal: Balance return predictor
stack in signal trampoline") changed __kernel_sigtramp_rt64() VDSO and
trampoline code, and introduced a regression in the way glibc's
backtrace()[1] detects the signal-handler stack frame. Apart from the
practical implications, __kernel_sigtramp_rt64() was a VDSO function
with the semantics that it is a function you can call from userspace
to end a signal handling. Now this semantics are no longer valid.

I believe the aforementioned change affects all releases since 5.9.

This patch tries to fix both the semantics and practical aspect of
__kernel_sigtramp_rt64() returning it to the previous code, whilst
keeping the intended behaviour of 0138ba5783ae by adding a new symbol
to serve as the jump target from the kernel to the trampoline. Now the
trampoline has two parts, a new entry point and the old return point.

[1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2021-January/223194.html

Fixes: 0138ba5783ae ("powerpc/64/signal: Balance return predictor stack in signal trampoline")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Raoni Fassina Firmino <raoni@linux.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Minor tweaks to change log formatting, add stable tag]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210201200505.iz46ubcizipnkcxe@work-tp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib: cdev: clear debounce period if line set to output

commit 03a58ea5905fdbd93ff9e52e670d802600ba38cd upstream.

When set_config changes a line from input to output debounce is
implicitly disabled, as debounce makes no sense for outputs, but the
debounce period is not being cleared and is still reported in the
line info.

So clear the debounce period when the debouncer is stopped in
edge_detector_stop().

Fixes: 65cff7046406 ("gpiolib: cdev: support setting debounce")
Cc: stable@vger.kernel.org
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: drop mm/files between task_work_submit

[ Upstream commit aec18a57edad562d620f7d19016de1fc0cc2208c ]

Since SQPOLL task can be shared and so task_work entries can be a mix of
them, we need to drop mm and files before trying to issue next request.

Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: reinforce cancel on flush during exit

[ Upstream commit 3a7efd1ad269ccaf9c1423364d97c9661ba6dafa ]

What 84965ff8a84f0 ("io_uring: if we see flush on exit, cancel related tasks")
really wants is to cancel all relevant REQ_F_INFLIGHT requests reliably.
That can be achieved by io_uring_cancel_files(), but we'll miss it
calling io_uring_cancel_task_requests(files=NULL) from io_uring_flush(),
because it will go through __io_uring_cancel_task_requests().

Just always call io_uring_cancel_files() during cancel, it's good enough
for now.

Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix sqo ownership false positive warning

[ Upstream commit 70b2c60d3797bffe182dddb9bb55975b9be5889a ]

WARNING: CPU: 0 PID: 21359 at fs/io_uring.c:9042
    io_uring_cancel_task_requests+0xe55/0x10c0 fs/io_uring.c:9042
Call Trace:
 io_uring_flush+0x47b/0x6e0 fs/io_uring.c:9227
 filp_close+0xb4/0x170 fs/open.c:1295
 close_files fs/file.c:403 [inline]
 put_files_struct fs/file.c:418 [inline]
 put_files_struct+0x1cc/0x350 fs/file.c:415
 exit_files+0x7e/0xa0 fs/file.c:435
 do_exit+0xc22/0x2ae0 kernel/exit.c:820
 do_group_exit+0x125/0x310 kernel/exit.c:922
 get_signal+0x427/0x20f0 kernel/signal.c:2773
 arch_do_signal_or_restart+0x2a8/0x1eb0 arch/x86/kernel/signal.c:811
 handle_signal_work kernel/entry/common.c:147 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x148/0x250 kernel/entry/common.c:201
 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
 syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:302
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Now io_uring_cancel_task_requests() can be called not through file
notes but directly, remove a WARN_ONCE() there that give us false
positives. That check is not very important and we catch it in other
places.

Fixes: 84965ff8a84f0 ("io_uring: if we see flush on exit, cancel related tasks")
Cc: stable@vger.kernel.org # 5.9+
Reported-by: syzbot+3e3d9bd0c6ce9efbc3ef@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix list corruption for splice file_get

[ Upstream commit f609cbb8911e40e15f9055e8f945f926ac906924 ]

kernel BUG at lib/list_debug.c:29!
Call Trace:
 __list_add include/linux/list.h:67 [inline]
 list_add include/linux/list.h:86 [inline]
 io_file_get+0x8cc/0xdb0 fs/io_uring.c:6466
 __io_splice_prep+0x1bc/0x530 fs/io_uring.c:3866
 io_splice_prep fs/io_uring.c:3920 [inline]
 io_req_prep+0x3546/0x4e80 fs/io_uring.c:6081
 io_queue_sqe+0x609/0x10d0 fs/io_uring.c:6628
 io_submit_sqe fs/io_uring.c:6705 [inline]
 io_submit_sqes+0x1495/0x2720 fs/io_uring.c:6953
 __do_sys_io_uring_enter+0x107d/0x1f30 fs/io_uring.c:9353
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

io_file_get() may be called from splice, and so REQ_F_INFLIGHT may
already be set.

Fixes: 02a13674fa0e8 ("io_uring: account io_uring internal files as REQ_F_INFLIGHT")
Cc: stable@vger.kernel.org # 5.9+
Reported-by: syzbot+6879187cf57845801267@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLE

[ Upstream commit 6195ba09822c87cad09189bbf550d0fbe714687a ]

Abaci reported the follow warning:

[   27.073425] do not call blocking ops when !TASK_RUNNING; state=1 set at [] prepare_to_wait_exclusive+0x3a/0xc0
[   27.075805] WARNING: CPU: 0 PID: 951 at kernel/sched/core.c:7853 __might_sleep+0x80/0xa0
[   27.077604] Modules linked in:
[   27.078379] CPU: 0 PID: 951 Comm: a.out Not tainted 5.11.0-rc3+ #1
[   27.079637] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[   27.080852] RIP: 0010:__might_sleep+0x80/0xa0
[   27.081835] Code: 65 48 8b 04 25 80 71 01 00 48 8b 90 c0 15 00 00 48 8b 70 18 48 c7 c7 08 39 95 82 c6 05 f9 5f de 08 01 48 89 d1 e8 00 c6 fa ff  0b eb bf 41 0f b6 f5 48 c7 c7 40 23 c9 82 e8 f3 48 ec 00 eb a7
[   27.084521] RSP: 0018:ffffc90000fe3ce8 EFLAGS: 00010286
[   27.085350] RAX: 0000000000000000 RBX: ffffffff82956083 RCX: 0000000000000000
[   27.086348] RDX: ffff8881057a0000 RSI: ffffffff8118cc9e RDI: ffff88813bc28570
[   27.087598] RBP: 00000000000003a7 R08: 0000000000000001 R09: 0000000000000001
[   27.088819] R10: ffffc90000fe3e00 R11: 00000000fffef9f0 R12: 0000000000000000
[   27.089819] R13: 0000000000000000 R14: ffff88810576eb80 R15: ffff88810576e800
[   27.091058] FS:  00007f7b144cf740(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
[   27.092775] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   27.093796] CR2: 00000000022da7b8 CR3: 000000010b928002 CR4: 00000000003706f0
[   27.094778] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   27.095780] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   27.097011] Call Trace:
[   27.097685]  __mutex_lock+0x5d/0xa30
[   27.098565]  ? prepare_to_wait_exclusive+0x71/0xc0
[   27.099412]  ? io_cqring_overflow_flush.part.101+0x6d/0x70
[   27.100441]  ? lockdep_hardirqs_on_prepare+0xe9/0x1c0
[   27.101537]  ? _raw_spin_unlock_irqrestore+0x2d/0x40
[   27.102656]  ? trace_hardirqs_on+0x46/0x110
[   27.103459]  ? io_cqring_overflow_flush.part.101+0x6d/0x70
[   27.104317]  io_cqring_overflow_flush.part.101+0x6d/0x70
[   27.105113]  io_cqring_wait+0x36e/0x4d0
[   27.105770]  ? find_held_lock+0x28/0xb0
[   27.106370]  ? io_uring_remove_task_files+0xa0/0xa0
[   27.107076]  __x64_sys_io_uring_enter+0x4fb/0x640
[   27.107801]  ? rcu_read_lock_sched_held+0x59/0xa0
[   27.108562]  ? lockdep_hardirqs_on_prepare+0xe9/0x1c0
[   27.109684]  ? syscall_enter_from_user_mode+0x26/0x70
[   27.110731]  do_syscall_64+0x2d/0x40
[   27.111296]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   27.112056] RIP: 0033:0x7f7b13dc8239
[   27.112663] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05  3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 ec 2c 00 f7 d8 64 89 01 48
[   27.115113] RSP: 002b:00007ffd6d7f5c88 EFLAGS: 00000286 ORIG_RAX: 00000000000001aa
[   27.116562] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b13dc8239
[   27.117961] RDX: 000000000000478e RSI: 0000000000000000 RDI: 0000000000000003
[   27.118925] RBP: 00007ffd6d7f5cb0 R08: 0000000020000040 R09: 0000000000000008
[   27.119773] R10: 0000000000000001 R11: 0000000000000286 R12: 0000000000400480
[   27.120614] R13: 00007ffd6d7f5d90 R14: 0000000000000000 R15: 0000000000000000
[   27.121490] irq event stamp: 5635
[   27.121946] hardirqs last  enabled at (5643): [] console_unlock+0x5c4/0x740
[   27.123476] hardirqs last disabled at (5652): [] console_unlock+0x4e7/0x740
[   27.125192] softirqs last  enabled at (5272): [] __do_softirq+0x3c5/0x5aa
[   27.126430] softirqs last disabled at (5267): [] asm_call_irq_on_stack+0xf/0x20
[   27.127634] ---[ end trace 289d7e28fa60f928 ]---

This is caused by calling io_cqring_overflow_flush() which may sleep
after calling prepare_to_wait_exclusive() which set task state to
TASK_INTERRUPTIBLE

Reported-by: Abaci <abaci@linux.alibaba.com>
Fixes: 6c503150ae33 ("io_uring: patch up IOPOLL overflow_flush sync")
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLE

[ Upstream commit ca70f00bed6cb255b7a9b91aa18a2717c9217f70 ]

do not call blocking ops when !TASK_RUNNING; state=2 set at
[<00000000ced9dbfc>] prepare_to_wait+0x1f4/0x3b0
kernel/sched/wait.c:262
WARNING: CPU: 1 PID: 19888 at kernel/sched/core.c:7853
__might_sleep+0xed/0x100 kernel/sched/core.c:7848
RIP: 0010:__might_sleep+0xed/0x100 kernel/sched/core.c:7848
Call Trace:
 __mutex_lock_common+0xc4/0x2ef0 kernel/locking/mutex.c:935
 __mutex_lock kernel/locking/mutex.c:1103 [inline]
 mutex_lock_nested+0x1a/0x20 kernel/locking/mutex.c:1118
 io_wq_submit_work+0x39a/0x720 fs/io_uring.c:6411
 io_run_cancel fs/io-wq.c:856 [inline]
 io_wqe_cancel_pending_work fs/io-wq.c:990 [inline]
 io_wq_cancel_cb+0x614/0xcb0 fs/io-wq.c:1027
 io_uring_cancel_files fs/io_uring.c:8874 [inline]
 io_uring_cancel_task_requests fs/io_uring.c:8952 [inline]
 __io_uring_files_cancel+0x115d/0x19e0 fs/io_uring.c:9038
 io_uring_files_cancel include/linux/io_uring.h:51 [inline]
 do_exit+0x2e6/0x2490 kernel/exit.c:780
 do_group_exit+0x168/0x2d0 kernel/exit.c:922
 get_signal+0x16b5/0x2030 kernel/signal.c:2770
 arch_do_signal_or_restart+0x8e/0x6a0 arch/x86/kernel/signal.c:811
 handle_signal_work kernel/entry/common.c:147 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0xac/0x1e0 kernel/entry/common.c:201
 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
 syscall_exit_to_user_mode+0x48/0x190 kernel/entry/common.c:302
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Rewrite io_uring_cancel_files() to mimic __io_uring_task_cancel()'s
counting scheme, so it does all the heavy work before setting
TASK_UNINTERRUPTIBLE.

Cc: stable@vger.kernel.org # 5.9+
Reported-by: syzbot+f655445043a26a7cfab8@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: fix inverted task check]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: replace inflight_wait with tctx->wait

[ Upstream commit c98de08c990e190fc7cc3aaf8079b4a0674c6425 ]

As tasks now cancel only theirs requests, and inflight_wait is awaited
only in io_uring_cancel_files(), which should be called with ->in_idle
set, instead of keeping a separate inflight_wait use tctx->wait.

That will add some spurious wakeups but actually is safer from point of
not hanging the task.

e.g.
task1                   | IRQ
                        | *start* io_complete_rw_common(link)
                        |        link: req1 -> req2 -> req3(with files)
*cancel_files()         |
io_wq_cancel(), etc.    |
                        | put_req(link), adds to io-wq req2
schedule()              |

So, task1 will never try to cancel req2 or req3. If req2 is
long-standing (e.g. read(empty_pipe)), this may hang.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLE

[ Upstream commit a1bb3cd58913338e1b627ea6b8c03c2ae82d293f ]

If the tctx inflight number haven't changed because of cancellation,
__io_uring_task_cancel() will continue leaving the task in
TASK_UNINTERRUPTIBLE state, that's not expected by
__io_uring_files_cancel(). Ensure we always call finish_wait() before
retrying.

Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: if we see flush on exit, cancel related tasks

[ Upstream commit 84965ff8a84f0368b154c9b367b62e59c1193f30 ]

Ensure we match tasks that belong to a dead or dying task as well, as we
need to reap those in addition to those belonging to the exiting task.

Cc: stable@vger.kernel.org # 5.9+
Reported-by: Josef Grieb <josef.grieb@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: account io_uring internal files as REQ_F_INFLIGHT

[ Upstream commit 02a13674fa0e8dd326de8b9f4514b41b03d99003 ]

We need to actively cancel anything that introduces a potential circular
loop, where io_uring holds a reference to itself. If the file in question
is an io_uring file, then add the request to the inflight list.

Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix files cancellation

[ Upstream commit bee749b187ac57d1faf00b2ab356ff322230fce8 ]

io_uring_cancel_files()'s task check condition mistakenly got flipped.

1. There can't be a request in the inflight list without
IO_WQ_WORK_FILES, kill this check to keep the whole condition simpler.
2. Also, don't call the function for files==NULL to not do such a check,
all that staff is already handled well by its counter part,
__io_uring_cancel_task_requests().

With that just flip the task check.

Also, it iowq-cancels all request of current task there, don't forget to
set right ->files into struct io_task_cancel.

Fixes: c1973b38bf639 ("io_uring: cancel only requests of current task")
Reported-by: syzbot+c0d52d0b3c0c3ffb9525@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: always batch cancel in *cancel_files()

[ Upstream commit f6edbabb8359798c541b0776616c5eab3a840d3d ]

Instead of iterating over each request and cancelling it individually in
io_uring_cancel_files(), try to cancel all matching requests and use
->inflight_list only to check if there anything left.

In many cases it should be faster, and we can reuse a lot of code from
task cancellation.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: pass files into kill timeouts/poll

[ Upstream commit 6b81928d4ca8668513251f9c04cdcb9d38ef51c7 ]

Make io_poll_remove_all() and io_kill_timeouts() to match against files
as well. A preparation patch, effectively not used by now.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: don't iterate io_uring_cancel_files()

[ Upstream commit b52fda00dd9df8b4a6de5784df94f9617f6133a1 ]

io_uring_cancel_files() guarantees to cancel all matching requests,
that's not necessary to do that in a loop. Move it up in the callchain
into io_uring_cancel_task_requests().

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: add a {task,files} pair matching helper

[ Upstream commit 08d23634643c239ddae706758f54d3a8e0c24962 ]

Add io_match_task() that matches both task and files.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: simplify io_task_match()

[ Upstream commit 06de5f5973c641c7ae033f133ecfaaf64fe633a6 ]

If IORING_SETUP_SQPOLL is set all requests belong to the corresponding
SQPOLL task, so skip task checking in that case and always match.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"

This reverts commit 93a3b097c467bd5efc1ae3a271c336fdad3b2108.

GIC interrupt 117 is shared with the HDMI interrupt controller
and all the standard BSC I2C controllers. Whilst the BSC driver
flags the interrupt as shared, there doesn't appear to be an
easy way to flag the controller as being on a shared parent
interrupt.

Revert to polling the I2C controllers.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Partial revert "bcm2711: Disable bsc_intr and aon_intr by default and enable in overlay"

This reverts commit c765fd45856a34b9e46daa9263faeafe006c3985.

bsc_intr is being removed again as it causes issues.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Added hflip and vflip controls to ov9281

Signed-off-by: Mathias Anhalt <mathiasanhalt@web.de>

Fixed picture line bug in all ov9281 modes

Signed-off-by: Mathias Anhalt <mathiasanhalt@web.de>

Linux 5.10.15

Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Davidson Francis <davidsondfgl@gmail.com>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ross Schmidt <ross.schm.dev@gmail.com>
Link: https://lore.kernel.org/r/20210208145818.395353822@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: replaced invalid qdisc tree flush helper in qdisc_replace

commit 938e0fcd3253efdef8924714158911286d08cfe1 upstream.

Commit e5f0e8f8e456 ("net: sched: introduce and use qdisc tree flush/purge helpers")
introduced qdisc tree flush/purge helpers, but erroneously used flush helper
instead of purge helper in qdisc_replace function.
This issue was found in our CI, that tests various qdisc setups by configuring
qdisc and sending data through it. Call of invalid helper sporadically leads
to corruption of vt_tree/cf_tree of hfsc_class that causes kernel oops:

 Oops: 0000 [#1] SMP PTI
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-8f6859df #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
 RIP: 0010:rb_insert_color+0x18/0x190
 Code: c3 31 c0 c3 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 48 8b 07 48 85 c0 0f 84 05 01 00 00 48 8b 10 f6 c2 01 0f 85 34 01 00 00 <48> 8b 4a 08 49 89 d0 48 39 c1 74 7d 48 85 c9 74 32 f6 01 01 75 2d
 RSP: 0018:ffffc900000b8bb0 EFLAGS: 00010246
 RAX: ffff8881ef4c38b0 RBX: ffff8881d956e400 RCX: ffff8881ef4c38b0
 RDX: 0000000000000000 RSI: ffff8881d956f0a8 RDI: ffff8881d956e4b0
 RBP: 0000000000000000 R08: 000000d5c4e249da R09: 1600000000000000
 R10: ffffc900000b8be0 R11: ffffc900000b8b28 R12: 0000000000000001
 R13: 000000000000005a R14: ffff8881f0905000 R15: ffff8881f0387d00
 FS:  0000000000000000(0000) GS:ffff8881f8b00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000008 CR3: 00000001f4796004 CR4: 0000000000060ee0
 Call Trace:
  <IRQ>
  init_vf.isra.19+0xec/0x250 [sch_hfsc]
  hfsc_enqueue+0x245/0x300 [sch_hfsc]
  ? fib_rules_lookup+0x12a/0x1d0
  ? __dev_queue_xmit+0x4b6/0x930
  ? hfsc_delete_class+0x250/0x250 [sch_hfsc]
  __dev_queue_xmit+0x4b6/0x930
  ? ip6_finish_output2+0x24d/0x590
  ip6_finish_output2+0x24d/0x590
  ? ip6_output+0x6c/0x130
  ip6_output+0x6c/0x130
  ? __ip6_finish_output+0x110/0x110
  mld_sendpack+0x224/0x230
  mld_ifc_timer_expire+0x186/0x2c0
  ? igmp6_group_dropped+0x200/0x200
  call_timer_fn+0x2d/0x150
  run_timer_softirq+0x20c/0x480
  ? tick_sched_do_timer+0x60/0x60
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xf7/0x2cb
  irq_exit+0xa0/0xb0
  smp_apic_timer_interrupt+0x74/0x150
  apic_timer_interrupt+0xf/0x20
  </IRQ>

Fixes: e5f0e8f8e456 ("net: sched: introduce and use qdisc tree flush/purge helpers")
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Reported-by: Alexander Kuznetsov <wwfq@yandex-team.ru>
Acked-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Acked-by: Dmitry Yakunin <zeil@yandex-team.ru>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/20210201200049.299153-1-ovov@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6xxx: override existent unicast portvec in port_fdb_add

commit f72f2fb8fb6be095b98af5d740ac50cffd0b0cae upstream.

Having multiple destination ports for a unicast address does not make
sense.
Make port_db_load_purge override existent unicast portvec instead of
adding a new port bit.

Fixes: 884729399260 ("net: dsa: mv88e6xxx: handle multiple ports in ATU")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20210130134334.10243-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udp: ipv4: manipulate network header of NATed UDP GRO fraglist

commit c3df39ac9b0e3747bf8233ea9ce4ed5ceb3199d3 upstream.

UDP/IP header of UDP GROed frag_skbs are not updated even after NAT
forwarding. Only the header of head_skb from ip_finish_output_gso ->
skb_gso_segment is updated but following frag_skbs are not updated.

A call path skb_mac_gso_segment -> inet_gso_segment ->
udp4_ufo_fragment -> __udp_gso_segment -> __udp_gso_segment_list
does not try to update UDP/IP header of the segment list but copy
only the MAC header.

Update port, addr and check of each skb of the segment list in
__udp_gso_segment_list. It covers both SNAT and DNAT.

Fixes: 9fd1ff5d2ac7 (udp: Support UDP fraglist GRO/GSO.)
Signed-off-by: Dongseok Yi <dseok.yi@samsung.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Link: https://lore.kernel.org/r/1611962007-80092-1-git-send-email-dseok.yi@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ip_tunnel: fix mtu calculation

commit 28e104d00281ade30250b24e098bf50887671ea4 upstream.

dev->hard_header_len for tunnel interface is set only when header_ops
are set too and already contains full overhead of any tunnel encapsulation.
That's why there is not need to use this overhead twice in mtu calc.

Fixes: fdafed459998 ("ip_gre: set dev->hard_header_len and dev->needed_headroom properly")
Reported-by: Slava Bacherikov <mail@slava.cc>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/1611959267-20536-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

neighbour: Prevent a dead entry from updating gc_list

commit eb4e8fac00d1e01ada5e57c05d24739156086677 upstream.

Following race condition was detected:
<CPU A, t0> - neigh_flush_dev() is under execution and calls
neigh_mark_dead(n) marking the neighbour entry 'n' as dead.

<CPU B, t1> - Executing: __netif_receive_skb() ->
__netif_receive_skb_core() -> arp_rcv() -> arp_process().arp_process()
calls __neigh_lookup() which takes a reference on neighbour entry 'n'.

<CPU A, t2> - Moves further along neigh_flush_dev() and calls
neigh_cleanup_and_release(n), but since reference count increased in t2,
'n' couldn't be destroyed.

<CPU B, t3> - Moves further along, arp_process() and calls
neigh_update()-> __neigh_update() -> neigh_update_gc_list(), which adds
the neighbour entry back in gc_list(neigh_mark_dead(), removed it
earlier in t0 from gc_list)

<CPU B, t4> - arp_process() finally calls neigh_release(n), destroying
the neighbour entry.

This leads to 'n' still being part of gc_list, but the actual
neighbour structure has been freed.

The situation can be prevented from happening if we disallow a dead
entry to have any possibility of updating gc_list. This is what the
patch intends to achieve.

Fixes: 9c29a2f55ec0 ("neighbor: Fix locking order for gc_list changes")
Signed-off-by: Chinmay Agarwal <chinagar@codeaurora.org>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210127165453.GA20514@chinagar-linux.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igc: Report speed and duplex as unknown when device is runtime suspended

commit 2e99dedc73f004f650b197c9b269c15c7e01ad15 upstream.

Similar to commit 165ae7a8feb5 ("igb: Report speed and duplex as unknown
when device is runtime suspended"), if we try to read speed and duplex
sysfs while the device is runtime suspended, igc will complain and
stops working:

[  123.449883] igc 0000:03:00.0 enp3s0: PCIe link lost, device now detached
[  123.450052] BUG: kernel NULL pointer dereference, address: 0000000000000008
[  123.450056] #PF: supervisor read access in kernel mode
[  123.450058] #PF: error_code(0x0000) - not-present page
[  123.450059] PGD 0 P4D 0
[  123.450064] Oops: 0000 [#1] SMP NOPTI
[  123.450068] CPU: 0 PID: 2525 Comm: udevadm Tainted: G     U  W  OE     5.10.0-1002-oem #2+rkl2-Ubuntu
[  123.450078] RIP: 0010:igc_rd32+0x1c/0x90 [igc]
[  123.450080] Code: c0 5d c3 b8 fd ff ff ff c3 0f 1f 44 00 00 0f 1f 44 00 00 55 89 f0 48 89 e5 41 56 41 55 41 54 49 89 c4 53 48 8b 57 08 48 01 d0 <44> 8b 28 41 83 fd ff 74 0c 5b 44 89 e8 41 5c 41 5d 4

[  123.450083] RSP: 0018:ffffb0d100d6fcc0 EFLAGS: 00010202
[  123.450085] RAX: 0000000000000008 RBX: ffffb0d100d6fd30 RCX: 0000000000000000
[  123.450087] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff945a12716c10
[  123.450089] RBP: ffffb0d100d6fce0 R08: ffff945a12716550 R09: ffff945a09874000
[  123.450090] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000008
[  123.450092] R13: ffff945a12716000 R14: ffff945a037da280 R15: ffff945a037da290
[  123.450094] FS:  00007f3b34c868c0(0000) GS:ffff945b89200000(0000) knlGS:0000000000000000
[  123.450096] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  123.450098] CR2: 0000000000000008 CR3: 00000001144de006 CR4: 0000000000770ef0
[  123.450100] PKRU: 55555554
[  123.450101] Call Trace:
[  123.450111]  igc_ethtool_get_link_ksettings+0xd6/0x1b0 [igc]
[  123.450118]  __ethtool_get_link_ksettings+0x71/0xb0
[  123.450123]  duplex_show+0x74/0xc0
[  123.450129]  dev_attr_show+0x1d/0x40
[  123.450134]  sysfs_kf_seq_show+0xa1/0x100
[  123.450137]  kernfs_seq_show+0x27/0x30
[  123.450142]  seq_read+0xb7/0x400
[  123.450148]  ? common_file_perm+0x72/0x170
[  123.450151]  kernfs_fop_read+0x35/0x1b0
[  123.450155]  vfs_read+0xb5/0x1b0
[  123.450157]  ksys_read+0x67/0xe0
[  123.450160]  __x64_sys_read+0x1a/0x20
[  123.450164]  do_syscall_64+0x38/0x90
[  123.450168]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  123.450170] RIP: 0033:0x7f3b351fe142
[  123.450173] Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
[  123.450174] RSP: 002b:00007fffef2ec138 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  123.450177] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b351fe142
[  123.450179] RDX: 0000000000001001 RSI: 00005644c047f070 RDI: 0000000000000003
[  123.450180] RBP: 00007fffef2ec340 R08: 00005644c047f070 R09: 00007f3b352d9320
[  123.450182] R10: 00005644c047c010 R11: 0000000000000246 R12: 00005644c047cbf0
[  123.450184] R13: 00005644c047e6d0 R14: 0000000000000003 R15: 00007fffef2ec140
[  123.450189] Modules linked in: rfcomm ccm cmac algif_hash algif_skcipher af_alg bnep toshiba_acpi industrialio toshiba_haps hp_accel lis3lv02d btusb btrtl btbcm btintel bluetooth ecdh_generic ecc joydev input_leds nls_iso8859_1 snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_soc_hdac_hda snd_hda_codec_hdmi snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg soundwire_intel soundwire_generic_allocation soundwire_cadence snd_hda_codec snd_hda_core ath10k_pci snd_hwdep intel_rapl_msr intel_rapl_common ath10k_core soundwire_bus snd_soc_core x86_pkg_temp_thermal ath intel_powerclamp snd_compress ac97_bus snd_pcm_dmaengine mac80211 snd_pcm coretemp snd_seq_midi snd_seq_midi_event snd_rawmidi kvm_intel cfg80211 snd_seq snd_seq_device snd_timer mei_hdcp kvm libarc4 snd crct10dif_pclmul ghash_clmulni_intel aesni_intel
 mei_me dell_wmi
[  123.450266]  dell_smbios soundcore sparse_keymap dcdbas crypto_simd cryptd mei dell_uart_backlight glue_helper ee1004 wmi_bmof intel_wmi_thunderbolt dell_wmi_descriptor mac_hid efi_pstore acpi_pad acpi_tad intel_cstate sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec crc32_pclmul rc_core drm intel_lpss_pci i2c_i801 ahci igc intel_lpss i2c_smbus idma64 xhci_pci libahci virt_dma xhci_pci_renesas wmi video pinctrl_tigerlake
[  123.450335] CR2: 0000000000000008
[  123.450338] ---[ end trace 9f731e38b53c35cc ]---

The more generic approach will be wrap get_link_ksettings() with begin()
and complete() callbacks, and calls runtime resume and runtime suspend
routine respectively. However, igc is like igb, runtime resume routine
uses rtnl_lock() which upper ethtool layer also uses.

So to prevent a deadlock on rtnl, take a different approach, use
pm_runtime_suspended() to avoid reading register while device is runtime
suspended.

Fixes: 8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: Set prev_flush_start and flush_bio in an atomic way

commit dc5d17a3c39b06aef866afca19245a9cfb533a79 upstream.

One customer reports a crash problem which causes by flush request. It
triggers a warning before crash.

        /* new request after previous flush is completed */
        if (ktime_after(req_start, mddev->prev_flush_start)) {
                WARN_ON(mddev->flush_bio);
                mddev->flush_bio = bio;
                bio = NULL;
        }

The WARN_ON is triggered. We use spin lock to protect prev_flush_start and
flush_bio in md_flush_request. But there is no lock protection in
md_submit_flush_data. It can set flush_bio to NULL first because of
compiler reordering write instructions.

For example, flush bio1 sets flush bio to NULL first in
md_submit_flush_data. An interrupt or vmware causing an extended stall
happen between updating flush_bio and prev_flush_start. Because flush_bio
is NULL, flush bio2 can get the lock and submit to underlayer disks. Then
flush bio1 updates prev_flush_start after the interrupt or extended stall.

Then flush bio3 enters in md_flush_request. The start time req_start is
behind prev_flush_start. The flush_bio is not NULL(flush bio2 hasn't
finished). So it can trigger the WARN_ON now. Then it calls INIT_WORK
again. INIT_WORK() will re-initialize the list pointers in the
work_struct, which then can result in a corrupted work list and the
work_struct queued a second time. With the work list corrupted, it can
lead in invalid work items being used and cause a crash in
process_one_work.

We need to make sure only one flush bio can be handled at one same time.
So add spin lock in md_submit_flush_data to protect prev_flush_start and
flush_bio in an atomic way.

Reviewed-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: ili210x - implement pressure reporting for ILI251x

commit 60159e9e7bc7e528c103b6b6d47dfd83af29669c upstream.

The ILI251x seems to report pressure information in the 5th byte of
each per-finger touch data element. On the available hardware, this
information has the values ranging from 0x0 to 0xa, which is also
matching the downstream example code. Report pressure information
on the ILI251x.

Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20201224071238.160098-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - sync supported devices with fork on GitHub

commit 9bbd77d5bbc9aff8cb74d805c31751f5f0691ba8 upstream.

There is a fork of this driver on GitHub [0] that has been updated
with new device IDs.

Merge those into the mainline driver, so the out-of-tree fork is not
needed for users of those devices anymore.

[0] https://github.com/paroj/xpad

Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Link: https://lore.kernel.org/r/20210121142523.1b6b050f@rechenknecht2k11
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: goodix - add support for Goodix GT9286 chip

commit 2dce6db70c77bbe639f5cd9cc796fb8f2694a7d0 upstream.

The Goodix GT9286 is a capacitive touch sensor IC based on GT1x.

This chip can be found on a number of smartphones, including the
F(x)tec Pro 1 and the Elephone U.

This has been tested on F(x)Tec Pro1 (MSM8998).

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109135512.149032-2-angelogioacchino.delregno@somainline.org
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/apic: Add extra serialization for non-serializing MSRs

commit 25a068b8e9a4eb193d755d58efcb3c98928636e0 upstream.

Jan Kiszka reported that the x2apic_wrmsr_fence() function uses a plain
MFENCE while the Intel SDM (10.12.3 MSR Access in x2APIC Mode) calls for
MFENCE; LFENCE.

Short summary: we have special MSRs that have weaker ordering than all
the rest. Add fencing consistent with current SDM recommendations.

This is not known to cause any issues in practice, only in theory.

Longer story below:

The reason the kernel uses a different semantic is that the SDM changed
(roughly in late 2017). The SDM changed because folks at Intel were
auditing all of the recommended fences in the SDM and realized that the
x2apic fences were insufficient.

Why was the pain MFENCE judged insufficient?

WRMSR itself is normally a serializing instruction. No fences are needed
because the instruction itself serializes everything.

But, there are explicit exceptions for this serializing behavior written
into the WRMSR instruction documentation for two classes of MSRs:
IA32_TSC_DEADLINE and the X2APIC MSRs.

Back to x2apic: WRMSR is *not* serializing in this specific case.
But why is MFENCE insufficient? MFENCE makes writes visible, but
only affects load/store instructions. WRMSR is unfortunately not a
load/store instruction and is unaffected by MFENCE. This means that a
non-serializing WRMSR could be reordered by the CPU to execute before
the writes made visible by the MFENCE have even occurred in the first
place.

This means that an x2apic IPI could theoretically be triggered before
there is any (visible) data to process.

Does this affect anything in practice? I honestly don't know. It seems
quite possible that by the time an interrupt gets to consume the (not
yet) MFENCE'd data, it has become visible, mostly by accident.

To be safe, add the SDM-recommended fences for all x2apic WRMSRs.

This also leaves open the question of the _other_ weakly-ordered WRMSR:
MSR_IA32_TSC_DEADLINE. While it has the same ordering architecture as
the x2APIC MSRs, it seems substantially less likely to be a problem in
practice. While writes to the in-memory Local Vector Table (LVT) might
theoretically be reordered with respect to a weakly-ordered WRMSR like
TSC_DEADLINE, the SDM has this to say:

  In x2APIC mode, the WRMSR instruction is used to write to the LVT
  entry. The processor ensures the ordering of this write and any
  subsequent WRMSR to the deadline; no fencing is required.

But, that might still leave xAPIC exposed. The safest thing to do for
now is to add the extra, recommended LFENCE.

 [ bp: Massage commit message, fix typos, drop accidentally added
   newline to tools/arch/x86/include/asm/barrier.h. ]

Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200305174708.F77040DD@viggo.jf.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/debug: Prevent data breakpoints on cpu_dr7

commit 3943abf2dbfae9ea4d2da05c1db569a0603f76da upstream.

local_db_save() is called at the start of exc_debug_kernel(), reads DR7 and
disables breakpoints to prevent recursion.

When running in a guest (X86_FEATURE_HYPERVISOR), local_db_save() reads the
per-cpu variable cpu_dr7 to check whether a breakpoint is active or not
before it accesses DR7.

A data breakpoint on cpu_dr7 therefore results in infinite #DB recursion.

Disallow data breakpoints on cpu_dr7 to prevent that.

Fixes: 84b6a3491567a("x86/entry: Optimize local_db_save() for virt")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210204152708.21308-2-jiangshanlai@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/debug: Prevent data breakpoints on __per_cpu_offset

commit c4bed4b96918ff1d062ee81fdae4d207da4fa9b0 upstream.

When FSGSBASE is enabled, paranoid_entry() fetches the per-CPU GSBASE value
via __per_cpu_offset or pcpu_unit_offsets.

When a data breakpoint is set on __per_cpu_offset[cpu] (read-write
operation), the specific CPU will be stuck in an infinite #DB loop.

RCU will try to send an NMI to the specific CPU, but it is not working
either since NMI also relies on paranoid_entry(). Which means it's
undebuggable.

Fixes: eaad981291ee3("x86/entry/64: Introduce the FIND_PERCPU_BASE macro")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210204152708.21308-1-jiangshanlai@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/debug: Fix DR6 handling

commit 9ad22e165994ccb64d85b68499eaef97342c175b upstream.

Tom reported that one of the GDB test-cases failed, and Boris bisected
it to commit:

  d53d9bc0cf78 ("x86/debug: Change thread.debugreg6 to thread.virtual_dr6")

The debugging session led us to commit:

  6c0aca288e72 ("x86: Ignore trap bits on single step exceptions")

It turns out that TF and data breakpoints are both traps and will be
merged, while instruction breakpoints are faults and will not be merged.
This means 6c0aca288e72 is wrong, only TF and instruction breakpoints
need to be excluded while TF and data breakpoints can be merged.

 [ bp: Massage commit message. ]

Fixes: d53d9bc0cf78 ("x86/debug: Change thread.debugreg6 to thread.virtual_dr6")
Fixes: 6c0aca288e72 ("x86: Ignore trap bits on single step exceptions")
Reported-by: Tom de Vries <tdevries@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/YBMAbQGACujjfz%2Bi@hirez.programming.kicks-ass.net
Link: https://lkml.kernel.org/r/20210128211627.GB4348@worktop.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/build: Disable CET instrumentation in the kernel

commit 20bf2b378729c4a0366a53e2018a0b70ace94bcd upstream.

With retpolines disabled, some configurations of GCC, and specifically
the GCC versions 9 and 10 in Ubuntu will add Intel CET instrumentation
to the kernel by default. That breaks certain tracing scenarios by
adding a superfluous ENDBR64 instruction before the fentry call, for
functions which can be called indirectly.

CET instrumentation isn't currently necessary in the kernel, as CET is
only supported in user space. Disable it unconditionally and move it
into the x86's Makefile as CET/CFI... enablement should be a per-arch
decision anyway.

 [ bp: Massage and extend commit message. ]

Fixes: 29be86d7f9cb ("kbuild: add -fcf-protection=none when using retpoline flags")
Reported-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Cc: <stable@vger.kernel.org>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lkml.kernel.org/r/20210128215219.6kct3h2eiustncws@treble
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/filemap: add missing mem_cgroup_uncharge() to __add_to_page_cache_locked()

commit da74240eb3fcd806edb1643874363e954d9e948b upstream.

Commit 3fea5a499d57 ("mm: memcontrol: convert page cache to a new
mem_cgroup_charge() API") introduced a bug in __add_to_page_cache_locked()
causing the following splat:

  page dumped because: VM_BUG_ON_PAGE(page_memcg(page))
  pages's memcg:ffff8889a4116000
  ------------[ cut here ]------------
  kernel BUG at mm/memcontrol.c:2924!
  invalid opcode: 0000 [#1] SMP KASAN PTI
  CPU: 35 PID: 12345 Comm: cat Tainted: G S      W I       5.11.0-rc4-debug+ #1
  Hardware name: HP HP Z8 G4 Workstation/81C7, BIOS P60 v01.25 12/06/2017
  RIP: commit_charge+0xf4/0x130
  Call Trace:
    mem_cgroup_charge+0x175/0x770
    __add_to_page_cache_locked+0x712/0xad0
    add_to_page_cache_lru+0xc5/0x1f0
    cachefiles_read_or_alloc_pages+0x895/0x2e10 [cachefiles]
    __fscache_read_or_alloc_pages+0x6c0/0xa00 [fscache]
    __nfs_readpages_from_fscache+0x16d/0x630 [nfs]
    nfs_readpages+0x24e/0x540 [nfs]
    read_pages+0x5b1/0xc40
    page_cache_ra_unbounded+0x460/0x750
    generic_file_buffered_read_get_pages+0x290/0x1710
    generic_file_buffered_read+0x2a9/0xc30
    nfs_file_read+0x13f/0x230 [nfs]
    new_sync_read+0x3af/0x610
    vfs_read+0x339/0x4b0
    ksys_read+0xf1/0x1c0
    do_syscall_64+0x33/0x40
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Before that commit, there was a try_charge() and commit_charge() in
__add_to_page_cache_locked().  These two separated charge functions were
replaced by a single mem_cgroup_charge().  However, it forgot to add a
matching mem_cgroup_uncharge() when the xarray insertion failed with the
page released back to the pool.

Fix this by adding a mem_cgroup_uncharge() call when insertion error
happens.

Link: https://lkml.kernel.org/r/20210125042441.20030-1-longman@redhat.com
Fixes: 3fea5a499d57 ("mm: memcontrol: convert page cache to a new mem_cgroup_charge() API")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <smuchun@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: thp: fix MADV_REMOVE deadlock on shmem THP

commit 1c2f67308af4c102b4e1e6cd6f69819ae59408e0 upstream.

Sergey reported deadlock between kswapd correctly doing its usual
lock_page(page) followed by down_read(page->mapping->i_mmap_rwsem), and
madvise(MADV_REMOVE) on an madvise(MADV_HUGEPAGE) area doing
down_write(page->mapping->i_mmap_rwsem) followed by lock_page(page).

This happened when shmem_fallocate(punch hole)'s unmap_mapping_range()
reaches zap_pmd_range()'s call to __split_huge_pmd().  The same deadlock
could occur when partially truncating a mapped huge tmpfs file, or using
fallocate(FALLOC_FL_PUNCH_HOLE) on it.

__split_huge_pmd()'s page lock was added in 5.8, to make sure that any
concurrent use of reuse_swap_page() (holding page lock) could not catch
the anon THP's mapcounts and swapcounts while they were being split.

Fortunately, reuse_swap_page() is never applied to a shmem or file THP
(not even by khugepaged, which checks PageSwapCache before calling), and
anonymous THPs are never created in shmem or file areas: so that
__split_huge_pmd()'s page lock can only be necessary for anonymous THPs,
on which there is no risk of deadlock with i_mmap_rwsem.

Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2101161409470.2022@eggly.anvils
Fixes: c444eb564fb1 ("mm: thp: make the THP mapcount atomic against __split_huge_pmd_locked()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/vmalloc: separate put pages and flush VM flags

commit 4f6ec8602341e97b364e4e0d41a1ed08148f5e98 upstream.

When VM_MAP_PUT_PAGES was added, it was defined with the same value as
VM_FLUSH_RESET_PERMS.  This doesn't seem like it will cause any big
functional problems other than some excess flushing for VM_MAP_PUT_PAGES
allocations.

Redefine VM_MAP_PUT_PAGES to have its own value.  Also, rearrange things
so flags are less likely to be missed in the future.

Link: https://lkml.kernel.org/r/20210122233706.9304-1-rick.p.edgecombe@intel.com
Fixes: b944afc9d64d ("mm: add a VM_MAP_PUT_PAGES flag for vmap")
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, compaction: move high_pfn to the for loop scope

commit 74e21484e40bb8ce0f9828bbfe1c9fc9b04249c6 upstream.

In fast_isolate_freepages, high_pfn will be used if a prefered one (ie
PFN >= low_fn) not found.

But the high_pfn is not reset before searching an free area, so when it
was used as freepage, it may from another free area searched before.  As
a result move_freelist_head(freelist, freepage) will have unexpected
behavior (eg corrupt the MOVABLE freelist)

  Unable to handle kernel paging request at virtual address dead000000000200
  Mem abort info:
    ESR = 0x96000044
    Exception class = DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000044
    CM = 0, WnR = 1
  [dead000000000200] address between user and kernel address ranges

  -000|list_cut_before(inline)
  -000|move_freelist_head(inline)
  -000|fast_isolate_freepages(inline)
  -000|isolate_freepages(inline)
  -000|compaction_alloc(?, ?)
  -001|unmap_and_move(inline)
  -001|migrate_pages([NSD:0xFFFFFF80088CBBD0] from = 0xFFFFFF80088CBD88, [NSD:0xFFFFFF80088CBBC8] get_new_p
  -002|__read_once_size(inline)
  -002|static_key_count(inline)
  -002|static_key_false(inline)
  -002|trace_mm_compaction_migratepages(inline)
  -002|compact_zone(?, [NSD:0xFFFFFF80088CBCB0] capc = 0x0)
  -003|kcompactd_do_work(inline)
  -003|kcompactd([X19] p = 0xFFFFFF93227FBC40)
  -004|kthread([X20] _create = 0xFFFFFFE1AFB26380)
  -005|ret_from_fork(asm)

The issue was reported on an smart phone product with 6GB ram and 3GB
zram as swap device.

This patch fixes the issue by reset high_pfn before searching each free
area, which ensure freepage and freelist match when call
move_freelist_head in fast_isolate_freepages().

Link: http://lkml.kernel.org/r/20190118175136.31341-12-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20210112094720.1238444-1-wu-yan@tcl.com
Fixes: 5a811889de10f1eb ("mm, compaction: use free lists to quickly locate a migration target")
Signed-off-by: Rokudo Yan <wu-yan@tcl.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb: remove VM_BUG_ON_PAGE from page_huge_active

commit ecbf4724e6061b4b01be20f6d797d64d462b2bc8 upstream.

The page_huge_active() can be called from scan_movable_pages() which do
not hold a reference count to the HugeTLB page.  So when we call
page_huge_active() from scan_movable_pages(), the HugeTLB page can be
freed parallel.  Then we will trigger a BUG_ON which is in the
page_huge_active() when CONFIG_DEBUG_VM is enabled.  Just remove the
VM_BUG_ON_PAGE.

Link: https://lkml.kernel.org/r/20210115124942.46403-6-songmuchun@bytedance.com
Fixes: 7e1f049efb86 ("mm: hugetlb: cleanup using paeg_huge_active()")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb: fix a race between isolating and freeing page

commit 0eb2df2b5629794020f75e94655e1994af63f0d4 upstream.

There is a race between isolate_huge_page() and __free_huge_page().

  CPU0:                                     CPU1:

  if (PageHuge(page))
                                            put_page(page)
                                              __free_huge_page(page)
                                                  spin_lock(&hugetlb_lock)
                                                  update_and_free_page(page)
                                                    set_compound_page_dtor(page,
                                                      NULL_COMPOUND_DTOR)
                                                  spin_unlock(&hugetlb_lock)
    isolate_huge_page(page)
      // trigger BUG_ON
      VM_BUG_ON_PAGE(!PageHead(page), page)
      spin_lock(&hugetlb_lock)
      page_huge_active(page)
        // trigger BUG_ON
        VM_BUG_ON_PAGE(!PageHuge(page), page)
      spin_unlock(&hugetlb_lock)

When we isolate a HugeTLB page on CPU0.  Meanwhile, we free it to the
buddy allocator on CPU1.  Then, we can trigger a BUG_ON on CPU0, because
it is already freed to the buddy allocator.

Link: https://lkml.kernel.org/r/20210115124942.46403-5-songmuchun@bytedance.com
Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb: fix a race between freeing and dissolving the page

commit 7ffddd499ba6122b1a07828f023d1d67629aa017 upstream.

There is a race condition between __free_huge_page()
and dissolve_free_huge_page().

  CPU0:                         CPU1:

  // page_count(page) == 1
  put_page(page)
    __free_huge_page(page)
                                dissolve_free_huge_page(page)
                                  spin_lock(&hugetlb_lock)
                                  // PageHuge(page) && !page_count(page)
                                  update_and_free_page(page)
                                  // page is freed to the buddy
                                  spin_unlock(&hugetlb_lock)
      spin_lock(&hugetlb_lock)
      clear_page_huge_active(page)
      enqueue_huge_page(page)
      // It is wrong, the page is already freed
      spin_unlock(&hugetlb_lock)

The race window is between put_page() and dissolve_free_huge_page().

We should make sure that the page is already on the free list when it is
dissolved.

As a result __free_huge_page would corrupt page(s) already in the buddy
allocator.

Link: https://lkml.kernel.org/r/20210115124942.46403-4-songmuchun@bytedance.com
Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlbfs: fix cannot migrate the fallocated HugeTLB page

commit 585fc0d2871c9318c949fbf45b1f081edd489e96 upstream.

If a new hugetlb page is allocated during fallocate it will not be
marked as active (set_page_huge_active) which will result in a later
isolate_huge_page failure when the page migration code would like to
move that page.  Such a failure would be unexpected and wrong.

Only export set_page_huge_active, just leave clear_page_huge_active as
static.  Because there are no external users.

Link: https://lkml.kernel.org/r/20210115124942.46403-3-songmuchun@bytedance.com
Fixes: 70c3547e36f5 (hugetlbfs: add hugetlbfs_fallocate())
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>