Havard Graff [Tue, 1 Nov 2016 15:03:00 +0000 (16:03 +0100)]
netsim: add "allow-reordering" property
Reordering of packets is not very common in networks, and the delay
functions will always introduce reordering if delay > packet-spacing,
so by setting allow-reordering to FALSE you guarantee that the packets
are in order, while at the same time introducing delay/jitter to them.
Stian Selnes [Mon, 3 Oct 2016 16:43:24 +0000 (18:43 +0200)]
netsim: Add gamma distribution for delay
This simulates the delay on wifi networks better.
Stian Selnes [Tue, 2 Aug 2016 11:45:54 +0000 (13:45 +0200)]
netsim: Change max-delay to be inclusive
It is more intuitive for the user that in order to acheive a constant
delay min-delay and max-delay are equal.
Stian Selnes [Mon, 1 Aug 2016 18:27:03 +0000 (20:27 +0200)]
netsim: Add "delay-distribution" property plus normal distribution
By using the property "delay-distribution" the user can control how the
delay applied to delayed packets is distributed. This is either the
uniform distribution (as before) or the normal distribution.
"min-delay" and "max-delay" control both distributions. For the normal
distribution it defines the bounds of the 95% confidence interval.
Havard Graff [Thu, 23 Nov 2017 12:47:48 +0000 (13:47 +0100)]
netsim: add token bucket algorithm for simulating network congestion
Havard Graff [Thu, 23 Nov 2017 12:48:32 +0000 (13:48 +0100)]
netsim: change property enums to PROP_* and fix indentation
Tim-Philipp Müller [Fri, 24 Nov 2017 22:09:25 +0000 (22:09 +0000)]
netsim: remove private struct and padding
There's no need for these things, since the plugin headers
are not public, and all the extra ->priv-> just clutter the
code.
Edward Hervey [Sat, 25 Nov 2017 08:41:00 +0000 (09:41 +0100)]
dashdemux: Handle bitrate > 2**31
On very-high connection, we could quite well exceed that. Instead use
gint64 for max-bitrate.
Nicolas Dufresne [Fri, 24 Nov 2017 22:06:22 +0000 (17:06 -0500)]
sdlshare: Destroy GL backend buffer before the GL Context
This was otherwise leading to a deadlock in the GL library.
Nicolas Dufresne [Fri, 24 Nov 2017 21:58:21 +0000 (16:58 -0500)]
sdlshare2: Fix race conditions
The client-draw callback is running on the GL Thread, which will
be required to map the buffer. Map early, and pass the mapped
frame instead. On top of that, make sure to signal any pending
draw before trying to push EOS, as some pad locks might be taken.
This is the cost of using the same thread to control GStreamer and
to render GL.
Nicolas Dufresne [Fri, 24 Nov 2017 21:58:01 +0000 (16:58 -0500)]
meson: Build gl/sdl examples
Nicolas Dufresne [Fri, 24 Nov 2017 20:48:19 +0000 (15:48 -0500)]
meson: Playout example has not GL deps
Nicolas Dufresne [Fri, 24 Nov 2017 20:19:25 +0000 (15:19 -0500)]
meson: Add missing examples directory
This will make it more visible what is missing in meson.
Nicolas Dufresne [Fri, 24 Nov 2017 20:17:02 +0000 (15:17 -0500)]
meson: Build playout example
Guillaume Desmottes [Wed, 22 Nov 2017 13:35:31 +0000 (14:35 +0100)]
h265parse: early set src caps when input not byte-stream
When input is not in byte-stream format there is no need to wait for the first
buffer before setting src caps. We already have all the information from the
input codec_data.
This allow us to already configure downstream elements allowing them,
for example, to already allocate their internal buffers as they know
the format of the input they are about to receive.
Same change as the one I just did in h264parse.
https://bugzilla.gnome.org/show_bug.cgi?id=790709
Guillaume Desmottes [Wed, 22 Nov 2017 13:35:31 +0000 (14:35 +0100)]
h264parse: early set src caps when input is avc
When input is in AVC format there is no need to wait for the first buffer
before setting src caps. We already have all the information from the
input codec_data.
This allow us to already configure downstream elements allowing them,
for example, to already allocate their internal buffers as they know
the format of the input they are about to receive.
https://bugzilla.gnome.org/show_bug.cgi?id=790709
Edward Hervey [Fri, 24 Nov 2017 07:06:52 +0000 (08:06 +0100)]
uvch264src: Check return values of all xu_query calls
And use warnings/returns like for other calls
CID #1373414
CID #1373417
Edward Hervey [Fri, 24 Nov 2017 07:00:21 +0000 (08:00 +0100)]
gtk: Fix possibility of NULL variable
It's quite unlikely since it's initialized in instance initialization.
CID #1417721
Edward Hervey [Fri, 24 Nov 2017 06:57:49 +0000 (07:57 +0100)]
dc1394src: Remove logically dead code
buffer would always be NULL in the error case. Simplify and just
return GST_FLOW_ERROR
CID #1417216
Jan Schmidt [Thu, 23 Nov 2017 12:01:52 +0000 (23:01 +1100)]
viv-fb: Don't destroy the native FB display
It causes crashes in applications because the result of
fbGetDisplay() might be in use elsewhere in the application
and Vivante doesn't seem to do any refcounting
Jan Schmidt [Thu, 23 Nov 2017 11:58:40 +0000 (22:58 +1100)]
Revert "gl: Use GstGLDisplayEGL directly instead of creating a GstGLDisplayVIVFb subclass"
This reverts commit
47fd4d391e775c11f529705bb0f457a9d25ba5e7.
This patch is incorrect. It doesn't actually compile, and causes a crash
because the viv-fb window implementation needs a native EGL handle
to pass to fbCreateWindow, but the GstGLDisplayEGL handleis actually
an EGLDisplay now (and gets cast to the wrong type)
Jan Schmidt [Thu, 23 Nov 2017 14:37:48 +0000 (01:37 +1100)]
3dvideo example: Correct video overlay for HiDPI
Use the GTK scaling factor to scale the video allocation
so video displays correctly on hi-dpi screens
Tim-Philipp Müller [Thu, 23 Nov 2017 10:15:49 +0000 (11:15 +0100)]
meson: remove outdated comment in build file
Hyunjun Ko [Thu, 23 Nov 2017 03:38:11 +0000 (12:38 +0900)]
msdkdec: keep draining even if a finish_task fails
Should continue draining so that it could try to
discard the rest of pending frames even if a finish_task fails.
https://bugzilla.gnome.org/show_bug.cgi?id=790312
Mario Alfredo Carrillo Arevalo [Fri, 10 Nov 2017 19:32:17 +0000 (13:32 -0600)]
opencv: Update version for building plugins
This commit allows to build the OpenCV plugin with OpenCV >= 2.3.0 to < 3.4.0.
https://bugzilla.gnome.org/show_bug.cgi?id=790192
Edward Hervey [Thu, 23 Nov 2017 07:14:06 +0000 (08:14 +0100)]
dvb: Fix previous commit
strlen on strings (and not sizeof) *sigh*
Edward Hervey [Thu, 23 Nov 2017 07:12:03 +0000 (08:12 +0100)]
dvb: Fix sock_addr usage (for real)
It was great checking that the string was not too big ... but
it's better if we actually copy the proper amount of bytes :)
CID #206004
Edward Hervey [Thu, 23 Nov 2017 07:09:36 +0000 (08:09 +0100)]
ipcpipeline: Don't leak structure
CID #1416131
Edward Hervey [Thu, 23 Nov 2017 07:05:48 +0000 (08:05 +0100)]
ipcpipeline: Simplify usage of g_cond_wait_until()
It will return FALSE if a timeout happened. So don't check if we
timed out afterwards, just use the return value.
CID #1416347
Edward Hervey [Thu, 23 Nov 2017 07:02:58 +0000 (08:02 +0100)]
ipcpipeline: Check the proper value
The code is meant to check the *peer* state change return value
(and not the sink's one).
CID #1416128
Piotr Drąg [Wed, 22 Nov 2017 16:37:02 +0000 (17:37 +0100)]
po: update POTFILES.in
https://bugzilla.gnome.org/show_bug.cgi?id=790716
Edward Hervey [Wed, 22 Nov 2017 15:53:17 +0000 (16:53 +0100)]
curlhttpsrc: Don't leak structure
CID #1415716
Mathieu Duponchelle [Mon, 6 Nov 2017 20:07:51 +0000 (21:07 +0100)]
aggregator: Remove klass->sinkpads_type
This posed problems for the python bindings (and possibly others).
Instead, subclasses now use add_pad_template_with_gtype.
https://bugzilla.gnome.org/show_bug.cgi?id=789986
Guillaume Desmottes [Mon, 20 Nov 2017 16:54:54 +0000 (17:54 +0100)]
h265parse: put downstream caps first if possible on sink caps
Try prioritizing downstream's caps over upstream's if possible so the
parser can configured in "passthrough" if possible and save it from
doing useless conversions.
Exact same change as the one I just did in h264parse.
https://bugzilla.gnome.org/show_bug.cgi?id=790628
Guillaume Desmottes [Mon, 20 Nov 2017 16:54:54 +0000 (17:54 +0100)]
h264parse: put downstream caps first if possible on sink caps
Try prioritizing downstream's caps over upstream's if possible so the
parser can configured in "passthrough" if possible and save it from
doing useless conversions.
https://bugzilla.gnome.org/show_bug.cgi?id=790628
Hyunjun Ko [Wed, 22 Nov 2017 02:33:54 +0000 (11:33 +0900)]
msdkdec: fix buffer leaks during drain and a leak of videobufferpool
https://bugzilla.gnome.org/show_bug.cgi?id=790312
Hyunjun Ko [Tue, 21 Nov 2017 05:57:03 +0000 (14:57 +0900)]
msdkenc: handle the MORE_DATA case
If the driver requires more data, just unref the frame at the moment
then retreive/finish the frame after encoding is finished.
This also fixes a memory leak.
https://bugzilla.gnome.org/show_bug.cgi?id=790312
Sebastian Dröge [Wed, 22 Nov 2017 08:30:22 +0000 (10:30 +0200)]
decklinkvideosink: Print "Starting" instead of "Stopping" when starting
Matthew Waters [Fri, 17 Nov 2017 06:09:22 +0000 (17:09 +1100)]
nvdec: implement flush/drain
Fixes outputted frame sequence when performing a seek
i.e. when seeking backwards, the first frame after the seek was a frame
from the future. This would result in GstVideoDecoder essentially
marking all the timestamps as essentially bogus and the base class would
attempt to compensate. A visible indication of this was 'decreasing timestamp'
warning after a seek.
https://bugzilla.gnome.org/show_bug.cgi?id=790478
Tim-Philipp Müller [Tue, 21 Nov 2017 19:56:38 +0000 (20:56 +0100)]
curl: fix meson build
Include libsdir so our i18n header there is found.
Nicolas Dufresne [Tue, 21 Nov 2017 17:03:38 +0000 (12:03 -0500)]
kmssink: Add Raspberry Pi (vc4) support
Edward Hervey [Tue, 21 Nov 2017 15:43:03 +0000 (16:43 +0100)]
de265: Don't leak CodecState
Unref it in error case
CID #1417220
Edward Hervey [Tue, 21 Nov 2017 15:39:14 +0000 (16:39 +0100)]
vulkan: Fix out-of-bound read
G_N_ELEMENTS is the *number* of entries, not the maximum entry number
CID #1417215
Edward Hervey [Tue, 21 Nov 2017 15:30:35 +0000 (16:30 +0100)]
curlhttpsrc: Post an error message if no URI was set
Like for other sources
Edward Hervey [Tue, 21 Nov 2017 15:30:17 +0000 (16:30 +0100)]
curl: Add i18n
Edward Hervey [Tue, 21 Nov 2017 14:48:06 +0000 (15:48 +0100)]
tests/srtp: Bump up timeout to 3mins for testcase
This involves generating and processing 65536 packets, let's give it
time to actually complete that.
And a bit of debug to track what's going on.
Edward Hervey [Tue, 21 Nov 2017 14:33:57 +0000 (15:33 +0100)]
smoothstreaming: Handle invalid XML
Nothing guarantees the manifest is valid and will return a root node
Edward Hervey [Tue, 21 Nov 2017 14:33:08 +0000 (15:33 +0100)]
curlhttpsrc: Fix return value
The function returns a gchar * (and not a boolean)
Edward Hervey [Tue, 21 Nov 2017 14:31:05 +0000 (15:31 +0100)]
curlhttpsrc: Don't switch to PAUSED if not URI was specified
Like for other sources
Edward Hervey [Mon, 20 Nov 2017 16:06:07 +0000 (17:06 +0100)]
all: Fix left-shift undefined behaviour
Cast to the target type before shifting (or use macro if available)
Sebastian Dröge [Tue, 31 Oct 2017 08:09:44 +0000 (10:09 +0200)]
msdkh264enc: Implement frame-packing SEI insertion for side-by-side and top-bottom
Ideally this would be supported directly in the Intel MediaSDK but
that's not the case nowadays.
https://bugzilla.gnome.org/show_bug.cgi?id=774920
Hyunjun Ko [Fri, 17 Nov 2017 08:49:16 +0000 (17:49 +0900)]
msdkenc: Fix handling of YUY2, UYVY, BGRA surfaces
https://bugzilla.gnome.org/show_bug.cgi?id=789847
Sebastian Dröge [Thu, 16 Nov 2017 09:32:52 +0000 (11:32 +0200)]
msdkenc: Add support for YV12, YUY2, UYVY and BGRA
By doing conversion with VPP to NV12 before the actual encoding.
https://bugzilla.gnome.org/show_bug.cgi?id=789847
Jun Xie [Thu, 9 Nov 2017 04:36:44 +0000 (12:36 +0800)]
hlsdemux: Fix memory leak caused by double buffer map
https://bugzilla.gnome.org/show_bug.cgi?id=789999
Justin Kim [Mon, 13 Nov 2017 14:01:58 +0000 (23:01 +0900)]
srt: add passphrase and key length properties
For stream encryption, both `passphrase` and `key-length`
properties are required.
https://bugzilla.gnome.org/show_bug.cgi?id=790315
Vivia Nikolaidou [Tue, 14 Nov 2017 16:13:54 +0000 (18:13 +0200)]
avwait: Deserialised timecodes set after caps event now get correct framerate
A deserialised timecode has a framerate of 0/1 by default. That breaks
it when comparing the frames field with another timecode (incoming from
the frame). We were setting the framerate when receiving the caps event,
but not when setting the timecode in set_property, so it was broken for
timecodes set after the caps event.
Also checking if the fps_n we got from the caps event is != 0 before
setting it - also at the caps event.
https://bugzilla.gnome.org/show_bug.cgi?id=790334
Vivia Nikolaidou [Fri, 10 Nov 2017 15:21:43 +0000 (17:21 +0200)]
timecode: Fix incorrect wording in error message
Vivia Nikolaidou [Fri, 10 Nov 2017 15:18:45 +0000 (17:18 +0200)]
avwait: Better handling of deserialised timecode framerates
Now that timecodes support proper serialisation / deserialisation, a
timecode might have an invalid fps_n / fps_d even without using the
target-time-code-string property. Detect those cases and set fps_n/fps_d
properly.
Vivia Nikolaidou [Thu, 9 Nov 2017 10:08:35 +0000 (12:08 +0200)]
decklink: Remove unused "bflags" variable
We are ignoring all its flags anyway, so let's remove it altogether.
Vivia Nikolaidou [Thu, 9 Nov 2017 09:44:17 +0000 (11:44 +0200)]
decklink: Ignore some driver-set timecode flags
The "fields" flag is ignored because currently GStreamer doesn't support
having only top or only bottom fields inside a frame. The "drop frame"
flag is ignored because some occurrences have been spotted where it
wasn't set while it should have been. In practice, when we have 29.97 or
59.94 FPS, it's always drop-frame.
https://bugzilla.gnome.org/show_bug.cgi?id=790112
Vivia Nikolaidou [Wed, 8 Nov 2017 22:16:21 +0000 (00:16 +0200)]
decklink: Don't crash when getting hw serial number doesn't return OK
If the return value isn't OK, it means we might be getting data that
points to an invalid memory address. That shouldn't make us crash.
Justin Kim [Mon, 31 Jul 2017 05:38:34 +0000 (14:38 +0900)]
srt: Introduce SRT source and sink
SRT[0] is an open source transport technology[1] that optimizes
streaming performance across unpredictable networks.
Although SRT is based on UDP, it works like connection-oriented
protocol. However, it doesn't mean that the SRT server or client
is necessarily to link to a receiver or a sender so, here, the
pairs of source and sink elements are introduced.
- srtserversink: SRT server to feed SRT stream
- srtclientsrc: SRT client to get SRT stream from srtserversink
- srtclientsink: SRT client to send SRT stream
- srtserversrc: SRT server to listen from srtclientsink
[0] https://github.com/Haivision/srt
[1] http://www.srtalliance.org/
https://bugzilla.gnome.org/show_bug.cgi?id=785730
Vivia Nikolaidou [Tue, 7 Nov 2017 19:12:42 +0000 (21:12 +0200)]
Revert "decklink: Detect gaps on incoming stream times, issue warnings"
This reverts commit
c1294e10f99adf04a104397da735904634400464.
Was not ready to be pushed yet.
Vivia Nikolaidou [Tue, 7 Nov 2017 19:12:36 +0000 (21:12 +0200)]
Revert "debugutils: Added new jitterer element"
This reverts commit
595254f21b15702d95d5a7cf6e43d29f9c179f43.
Was not ready to be pushed yet.
Vivia Nikolaidou [Tue, 7 Nov 2017 19:12:32 +0000 (21:12 +0200)]
Revert "timecodestamper: LTC from audio"
This reverts commit
c01afab9f7fa7e822dea38e358e92163e8d36282.
Was not ready to be pushed yet
Vivia Nikolaidou [Tue, 7 Nov 2017 19:12:25 +0000 (21:12 +0200)]
Revert "timecodestamper: Modify ltc-add to tc-add"
This reverts commit
6552981b795a024d26bf509893d55970c2294c04.
Was not ready to be pushed yet
Vivia Nikolaidou [Tue, 7 Nov 2017 19:03:22 +0000 (21:03 +0200)]
avwait: Fix crash when explicitly setting end_tc to NULL
If end_tc is NULL, it means that we don't want avwait to stop at any
timecode. When explicitly setting end_tc to NULL, there is no point in
comparing end_tc with start_tc (to see if we'll reject end_tc for being
before start_tc), so the check in question is completely disabled
instead of letting it crash.
Georg Lippitsch [Mon, 2 Oct 2017 16:39:49 +0000 (18:39 +0200)]
timecodestamper: Modify ltc-add to tc-add
It is more general now and also adds TC to internal counter
Georg Lippitsch [Tue, 13 Jun 2017 10:19:19 +0000 (13:19 +0300)]
timecodestamper: LTC from audio
Add support for parsing linear time code from
an audio source using libltc
https://github.com/x42/libltc
The user can now choose between 3 different and independently
running timecode sources. The old override-existing property
has been replaced by timecode-source.
https://bugzilla.gnome.org/show_bug.cgi?id=784295
Vivia Nikolaidou [Wed, 6 Sep 2017 10:16:21 +0000 (13:16 +0300)]
debugutils: Added new jitterer element
This element can be configured to add jitter and/or drift to incoming
buffers' PTS, DTS, or both. Amplitude and average of jitter and drift
are configurable.
https://bugzilla.gnome.org/show_bug.cgi?id=787358
Vivia Nikolaidou [Wed, 26 Apr 2017 16:05:21 +0000 (19:05 +0300)]
decklink: Detect gaps on incoming stream times, issue warnings
When we receive a video or audio buffer, we calculate the next stream
time based on the current stream time + buffer duration. If the next
buffer's stream time is after that, we issue a warning.
This happens because the stream time incoming from Decklink should be
really constant and without gaps. If there is a gap, it means that
something went wrong, e.g. the internal buffer pool is empty (too many
buffers queued up downstream).
https://bugzilla.gnome.org/show_bug.cgi?id=781776
Matthew Waters [Tue, 7 Nov 2017 04:21:43 +0000 (15:21 +1100)]
gl/tests: add some simple shader testing
Making sure that the default shaders compile and are usable
Matthew Waters [Tue, 7 Nov 2017 01:39:58 +0000 (12:39 +1100)]
gltestsrc: guard stop in gl thread
So we don't result in a critical when we've never created the GL context:
gst_gl_context_thread_add: assertion 'GST_IS_GL_CONTEXT (context)' failed
Matthew Waters [Mon, 6 Nov 2017 13:07:42 +0000 (00:07 +1100)]
glbasefilter: actually indicate start internally
Otherwise when we stop, the necessary stop functions will not be called
and things may be leaked.
https://bugzilla.gnome.org/show_bug.cgi?id=788280
Matthew Waters [Mon, 6 Nov 2017 12:19:15 +0000 (23:19 +1100)]
gltestsrc: free in the GL thread on stop
Calling GL functions not on the GL thread may crash in some GL
implementations.
https://bugzilla.gnome.org/show_bug.cgi?id=789665
Hyunjun Ko [Fri, 3 Nov 2017 01:55:28 +0000 (10:55 +0900)]
msdk: fix to build msdkvp8dec with mfx_dispatch
https://bugzilla.gnome.org/show_bug.cgi?id=789751
Edward Hervey [Sat, 4 Nov 2017 06:49:24 +0000 (07:49 +0100)]
dvb: Fix sockaddr_un usage
The sun_path field needs to be NULL-terminated
CID #206004
Tim-Philipp Müller [Thu, 2 Nov 2017 18:32:55 +0000 (18:32 +0000)]
aggregator: add doc blurb for gst_aggregator_pad_is_eos()
Tim-Philipp Müller [Thu, 2 Nov 2017 16:05:12 +0000 (16:05 +0000)]
aggregator: also remove now-unused PadForeachFunc declaration
https://bugzilla.gnome.org/show_bug.cgi?id=785679
Olivier Crête [Wed, 2 Aug 2017 16:08:26 +0000 (12:08 -0400)]
aggregator: Remove pad iterator function
Use new gst_element_foreach_sink_pad() from core instead.
https://bugzilla.gnome.org/show_bug.cgi?id=785679
Tim-Philipp Müller [Thu, 2 Nov 2017 12:46:26 +0000 (12:46 +0000)]
aggregator: use new gst_element_foreach_sink_pad()
Instead of gst_aggregator_iterate_sinkpads() which will
soon be removed.
https://bugzilla.gnome.org/show_bug.cgi?id=785679
Tim-Philipp Müller [Thu, 2 Nov 2017 12:46:26 +0000 (12:46 +0000)]
videoaggregator: use new gst_element_foreach_sink_pad()
Instead of gst_aggregator_iterate_sinkpads() which will
soon be removed.
https://bugzilla.gnome.org/show_bug.cgi?id=785679
Tim-Philipp Müller [Thu, 2 Nov 2017 12:56:57 +0000 (12:56 +0000)]
videoaggregator: add CAST macros
Tim-Philipp Müller [Thu, 2 Nov 2017 12:46:26 +0000 (12:46 +0000)]
audioaggregator: use new gst_element_foreach_sink_pad()
Instead of gst_aggregator_iterate_sinkpads() which will
soon be removed.
https://bugzilla.gnome.org/show_bug.cgi?id=785679
Tim-Philipp Müller [Thu, 2 Nov 2017 12:17:38 +0000 (12:17 +0000)]
gl: use new gst_element_foreach_sink_pad()
Instead of gst_aggregator_iterate_sinkpads() which will
soon be removed.
https://bugzilla.gnome.org/show_bug.cgi?id=785679
Tim-Philipp Müller [Thu, 2 Nov 2017 11:57:24 +0000 (11:57 +0000)]
videoaggregator: drop ABI compat in padding for new struct member
Don't really have to do that while it's in -bad and most users
are in-tree anyway.
Tim-Philipp Müller [Mon, 23 Oct 2017 20:03:22 +0000 (22:03 +0200)]
audioaggregator: make class padding larger
Stefan Sauer [Wed, 1 Nov 2017 14:18:08 +0000 (15:18 +0100)]
aggregator: add more comments
Hyunjun Ko [Mon, 30 Oct 2017 06:06:32 +0000 (15:06 +0900)]
msdk: adds msdkvp8dec
https://bugzilla.gnome.org/show_bug.cgi?id=789751
Sebastian Dröge [Mon, 30 Oct 2017 16:17:40 +0000 (18:17 +0200)]
msdk: Allow building against mfx_dispatcher
E.g. from https://github.com/lu-zero/mfx_dispatch
Matthew Waters [Fri, 22 Sep 2017 04:27:51 +0000 (14:27 +1000)]
vtdec: destroy and create the GL context on start()/stop()
Removes a reference count loop
Nicola Murino [Mon, 23 Oct 2017 08:42:51 +0000 (10:42 +0200)]
vtdec: flush decoder on stop
fix a memory leak if the decoder shut down before EOS
https://bugzilla.gnome.org/show_bug.cgi?id=787311
Nicola Murino [Mon, 23 Oct 2017 08:40:43 +0000 (10:40 +0200)]
vtenc: flush encoder on stop
https://bugzilla.gnome.org/show_bug.cgi?id=787311
Matthew Waters [Sat, 28 Oct 2017 10:34:08 +0000 (21:34 +1100)]
gl/shader: allow setting non-square matrices as uniforms on gles platforms
It is possible with GLES3
Matthew Waters [Sat, 28 Oct 2017 07:33:44 +0000 (18:33 +1100)]
gl/query: split tests and fix some corresponding issues in usage
Thiago Santos [Sat, 14 Oct 2017 20:22:18 +0000 (13:22 -0700)]
adaptivedemux: add replaced flag to not error out on bitrate change
When switching bitrates we set the old streams as cancelled, but it
could also be confused with a cancel due to other reasons (as an error)
and it would lead the element to stop the pipeline mistankely. This
would happen when the stream being replaced was waiting for a manifest
update on live. Ss make it sure that we are stopping for switching
bitrates to avoid erroring out.
https://bugzilla.gnome.org/show_bug.cgi?id=789457
Florent Thiéry [Wed, 25 Oct 2017 14:11:58 +0000 (16:11 +0200)]
configure.ac: fix fdk-aac version check
https://bugzilla.gnome.org/show_bug.cgi?id=789471
Mathieu Duponchelle [Wed, 25 Oct 2017 12:35:12 +0000 (14:35 +0200)]
fdkaacenc: check fdk-aac version in meson.build
configure.ac used to set -DHAVE_FDK_AAC_0_1_4 , which enables
7.1 support.
https://bugzilla.gnome.org/show_bug.cgi?id=789471
Vivia Nikolaidou [Tue, 24 Oct 2017 13:17:28 +0000 (16:17 +0300)]
avwait: Added end-timecode property
avwait can now be configured to stop when a given timecode has been
reached. It will start at the timecode indicated with start-timecode and
end at the timecode indicated with end-timecode. If end-timecode is
NULL (default), the previous functionality is preserved: keep going and
not end.
https://bugzilla.gnome.org/show_bug.cgi?id=789403
Stefan Sauer [Mon, 23 Oct 2017 09:52:38 +0000 (11:52 +0200)]
tests: comment and logging cleanups for audiomixer and aggregator
Remove some references to 'collectpads'. Logs pads through the object variants.
Add some more comments. Remove a left over comment.