gpu: host1x: Fix potential double free if IOMMU is disabled

[ Upstream commit 8466ff24a37a9a18fb935e90dda64f049131ae28 ]

If context device has no IOMMU, the 'cdl->devs' is freed in
error path, but host1x_memory_context_list_init() doesn't
return an error code, so the module can be loaded successfully,
when it's unloading, the host1x_memory_context_list_free() is
called in host1x_remove(), it will cause double free. Set the
'cdl->devs' to NULL after freeing it to avoid double free.

Fixes: 8aa5bcb61612 ("gpu: host1x: Add context device management code")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: renesas: renesas-soc: Release 'chipid' from ioremap()

[ Upstream commit fc187a46a8e682f0f1167b230792b88de01ceaa0 ]

Smatch reports:

drivers/soc/renesas/renesas-soc.c:536 renesas_soc_init() warn:
'chipid' from ioremap() not released on lines: 475.

If soc_dev_atrr allocation is failed, function renesas_soc_init()
will return without releasing 'chipid' from ioremap().

Fix this by adding function iounmap().

Fixes: cb5508e47e60 ("soc: renesas: Add support for reading product revision for RZ/G2L family")
Signed-off-by: Li Yang <lidaxian@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230331095545.31823-1-lidaxian@hust.edu.cn
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: bcm: brcmstb: biuctrl: fix of_iomap leak

[ Upstream commit c3fbced9af885a6f217fd95509a613d6590916ce ]

Smatch reports:

drivers/soc/bcm/brcmstb/biuctrl.c:291 setup_hifcpubiuctrl_regs() warn:
'cpubiuctrl_base' from of_iomap() not released on lines: 291.

This is because in setup_hifcpubiuctrl_regs(),
cpubiuctrl_base is not released when handle error, which may cause a leak.
To fix this, iounmap is added when handle error.

Fixes: 22f7a9116eba ("soc: brcmstb: Correct CPU_CREDIT_REG offset for Brahma-B53 CPUs")
Signed-off-by: Zhaoyang Li <lizhaoyang04@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230327115422.1536615-1-lizhaoyang04@hust.edu.cn
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mailbox: mpfs: switch to txdone_poll

[ Upstream commit b5984a9844fc45cd301a28fb56f3de95f7e20f3c ]

The system controller on PolarFire SoC has no interrupt to signify that
the TX has been completed. The interrupt instead signals that a service
requested by the mailbox client has succeeded. If a service fails, there
will be no interrupt delivered.

Switch to polling the busy register to determine whether transmission
has completed.

Fixes: 83d7b1560810 ("mbox: add polarfire soc system controller mailbox")
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Tested-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: dp: Change the aux retries times when receiving AUX_DEFER

[ Upstream commit 9243d70e05c5989f84f840612965f96b524da925 ]

DP 1.4a Section 2.8.7.1.5.6.1:
A DP Source device shall retry at least seven times upon receiving
AUX_DEFER before giving up the AUX transaction.

The drm_dp_i2c_do_msg() function in the drm_dp_helper.c file will
judge the status of the msg->reply parameter passed to aux_transfer
for different processing.

Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1680072203-10394-1-git-send-email-xinlei.lee@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/lima/lima_drv: Add missing unwind goto in lima_pdev_probe()

[ Upstream commit c5647cae2704e58d1c4e5fedbf63f11bca6376c9 ]

Smatch reports:
drivers/gpu/drm/lima/lima_drv.c:396 lima_pdev_probe() warn:
missing unwind goto?

Store return value in err and goto 'err_out0' which has
lima_sched_slab_fini() before returning.

Fixes: a1d2a6339961 ("drm/lima: driver for ARM Mali4xx GPUs")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314052711.4061652-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: VIOT: Initialize the correct IOMMU fwspec

[ Upstream commit 47d26684185d09e083669bbbd0c465ab3493a51f ]

When setting up DMA for a PCI device, we need to initialize its
iommu_fwspec with all possible alias RIDs (such as PCI bridges). To do
this we use pci_for_each_dma_alias() which calls
viot_pci_dev_iommu_init(). This function incorrectly initializes the
fwspec of the bridge instead of the device being configured. Fix it by
passing the original device as context to pci_for_each_dma_alias().

Fixes: 3cf485540e7b ("ACPI: Add driver for the VIOT table")
Link: https://lore.kernel.org/all/Y8qzOKm6kvhGWG1T@myrica
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mediatek: mt8192-asurada: Fix voltage constraint for Vgpu

[ Upstream commit ff4c868ba8df9dcd144ab4943a50adca1cf33ba2 ]

The MT8192 SoC specifies a maximum voltage for the GPU's digital supply
of 0.88V and the GPU OPPs are declaring a maximum voltage of 0.80V.

In order to keep the GPU voltage in the safe range, change the maximum
voltage for mt6315@7's vbuck1 to 0.80V as sending, for any mistake,
1.193V would be catastrophic.

Fixes: 3183cb62b033 ("arm64: dts: mediatek: asurada: Add SPMI regulators")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230301095523.428461-12-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos

[ Upstream commit e2b47e585931a988c856fd4ba31e1296f749aee3 ]

The OSM/EPSS hardware controls the frequency of each CPU cluster based
on requests from the OS and various throttling events in the system.
While throttling is in effect the related dcvs interrupt will be kept
high. The purpose of the code handling this interrupt is to
continuously report the thermal pressure based on the throttled
frequency.

The reasoning for adding QoS control to this mechanism is not entirely
clear, but the introduction of commit 'c4c0efb06f17 ("cpufreq:
qcom-cpufreq-hw: Add cpufreq qos for LMh")' causes the
scaling_max_frequncy to be set to the throttled frequency. On the next
iteration of polling, the throttled frequency is above or equal to the
newly requested frequency, so the polling is stopped.

With cpufreq limiting the max frequency, the hardware no longer report a
throttling state and no further updates to thermal pressure or qos
state are made.

The result of this is that scaling_max_frequency can only go down, and
the system becomes slower and slower every time a thermal throttling
event is reported by the hardware.

Even if the logic could be improved, there is no reason for software to
limit the max freqency in response to the hardware limiting the max
frequency. At best software will follow the reported hardware state, but
typically it will cause slower backoff of the throttling.

This reverts commit c4c0efb06f17fa4a37ad99e7752b18a5405c76dc.

Fixes: c4c0efb06f17 ("cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh")
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623

[ Upstream commit 0883426fd07e39355362e3f2eb9aee1a154dcaf6 ]

During the addition of SRAM voltage tracking for CCI scaling, this
driver got some voltage limits set for the vtrack algorithm: these
were moved to platform data first, then enforced in a later commit
6a17b3876bc8 ("cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()")
using these as max values for the regulator_set_voltage() calls.

In this case, the vsram/vproc constraints for MT7622 and MT7623
were supposed to be the same as MT2701 (and a number of other SoCs),
but that turned out to be a mistake because the aforementioned two
SoCs' maximum voltage for both VPROC and VPROC_SRAM is 1.36V.

Fix that by adding new platform data for MT7622/7623 declaring the
right {proc,sram}_max_volt parameter.

Fixes: ead858bd128d ("cpufreq: mediatek: Move voltage limits to platform data")
Fixes: 6a17b3876bc8 ("cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: mediatek: raise proc/sram max voltage for MT8516

[ Upstream commit d3296bb4cafd4bad4a5cf2eeab9d19cc94f9e30e ]

Since the upper boundary of proc/sram voltage of MT8516 is 1300 mV,
which is greater than the value of MT2701 1150 mV, we fix it by adding
the corresponding platform data and specify proc/sram_max_volt to
support MT8516.

Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Fixes: ead858bd128d ("cpufreq: mediatek: Move voltage limits to platform data")
Fixes: 6a17b3876bc8 ("cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()")
Reported-by: Nick Hainke <vincent@systemli.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: mediatek: fix KP caused by handler usage after regulator_put/clk_put

[ Upstream commit d51e106240bc755cbe59634b70d567c192b045b2 ]

Any kind of failure in mtk_cpu_dvfs_info_init() will lead to calling
regulator_put() or clk_put() and the KP will occur since the regulator/clk
handlers are used after released in mtk_cpu_dvfs_info_release().

To prevent the usage after regulator_put()/clk_put(), the regulator/clk
handlers are addressed in a way of "Free the Last Thing Style".

Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Fixes: 4b9ceb757bbb ("cpufreq: mediatek: Enable clocks and regulators")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Suggested-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: mediatek: fix passing zero to 'PTR_ERR'

[ Upstream commit d51c63230994f167126d9d8381011b4cb2b0ad22 ]

In order to prevent passing zero to 'PTR_ERR' in
mtk_cpu_dvfs_info_init(), we fix the return value of of_get_cci() using
error pointer by explicitly casting error number.

Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Fixes: 0daa47325bae ("cpufreq: mediatek: Link CCI device to CPU")
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: apple: t8103: Disable unused PCIe ports

[ Upstream commit a0189fdfb73dac856b8fa9b9f9581e5099c9391f ]

The PCIe ports are unused (without devices) so disable them instead of
removing them.

Fixes: 7c77ab91b33d ("arm64: dts: apple: Add missing M1 (t8103) devices")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: fix spi1 pin assignment on stm32mp15

[ Upstream commit 1b9f0ec81af0012aae30aa3b4c711ad71d42e246 ]

Bank A and B IOs can't be handled by the pin controller 'Z'. This patch
assign spi1 pin definition to the correct controller.

Fixes: 9ad65d245b7b ("ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group")

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/arm-cmn: Move overlapping wp_combine field

[ Upstream commit f87e9114b5e590c2c6658ca21d7b714ca240bdd0 ]

As eventid field was expanded to support new mesh versions, it started to
overlap with wp_combine field. Move wp_combine to fix the issue.

Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230301175540.19891-1-ilkka@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: Fix xfers allocation on Rx channel

[ Upstream commit b2ccba9e8cdc6fb3985cc227844e7c6af309ffb1 ]

Two distinct pools of xfer descriptors are allocated at initialization
time: one (Tx) used to provide xfers to track commands and their replies
(or delayed replies) and another (Rx) to pick xfers from to be used for
processing notifications.

Such pools, though, are allocated globally to be used by the whole SCMI
instance, they are not allocated per-channel and as such the allocation of
notifications xfers cannot be simply skipped if no Rx channel was found for
the base protocol common channel, because there could be defined more
optional per-protocol dedicated channels that instead support Rx channels.

Change the conditional check to skip allocation for the notification pool
only if no Rx channel has been detected on any per-channel protocol at all.

Fixes: 4ebd8f6dea81 ("firmware: arm_scmi: Add receive buffer support for notifications")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230326203449.3492948-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: gta04: fix excess dma channel usage

[ Upstream commit a622310f7f0185da02e42cdb06475f533efaae60 ]

OMAP processors support 32 channels but there is no check or
inspect this except booting a device and looking at dmesg reports
of not available channels.

Recently some more subsystems with DMA (aes1+2) were added filling
the list of dma channels beyond the limit of 32 (even if other
parameters indicate 96 or 128 channels). This leads to random
subsystem failures i(e.g. mcbsp for audio) after boot or boot
messages that DMA can not be initialized.

Another symptom is that

/sys/kernel/debug/dmaengine/summary

has 32 entries and does not show all required channels.

Fix by disabling unused (on the GTA04 hardware) mcspi1...4.
Each SPI channel allocates 4 DMA channels rapidly filling
the available ones.

Disabling unused SPI modules on the OMAP3 SoC may also save
some energy (has not been checked).

Fixes: c312f066314e ("ARM: dts: omap3: Migrate AES from hwmods to sysc-omap2")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
[re-enabled aes2, improved commit subject line]
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-Id: <20230113211151.2314874-1-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: rcar-du: Fix a NULL vs IS_ERR() bug

[ Upstream commit 40f43730f43699ce8557e4fe59622d4f4b69f44a ]

The drmm_encoder_alloc() function returns error pointers.  It never
returns NULL.  Fix the check accordingly.

Fixes: 7a1adbd23990 ("drm: rcar-du: Use drmm_encoder_alloc() to manage encoder")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8450: fix pcie1 gpios properties name

[ Upstream commit e57430d2483506f046e39bf8c61159dde88aede2 ]

Add the final "s" to the pgio properties and fix the invalid "enable"
name to the correct "wake", checked against the HDK8450 schematics.

Fixes: bc6588bc25fb ("arm64: dts: qcom: sm8450: add PCIe1 root device")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323-topic-sm8450-upstream-dt-bindings-fixes-v2-4-0ca1bea1a843@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-of-esdhc: fix quirk to ignore command inhibit for data

[ Upstream commit 0dd8316037a2a6d85b2be208bef9991de7b42170 ]

If spec_reg is equal to 'SDHCI_PRESENT_STATE', esdhc_readl_fixup()
fixes up register value and returns it immediately. As a result, the
further block
(spec_reg == SDHCI_PRESENT_STATE)
    &&(esdhc->quirk_ignore_data_inhibit == true),
is never executed.

The patch merges the second block into the first one.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 1f1929f3f2fa ("mmc: sdhci-of-esdhc: add quirk to ignore command inhibit for data")
Signed-off-by: Georgii Kruglov <georgy.kruglov@yandex.ru>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230321203715.3975-1-georgy.kruglov@yandex.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: processor: Fix evaluating _PDC method when running as Xen dom0

[ Upstream commit 073828e954459b883f23e53999d31e4c55ab9654 ]

In ACPI systems, the OS can direct power management, as opposed to the
firmware.  This OS-directed Power Management is called OSPM.  Part of
telling the firmware that the OS going to direct power management is
making ACPI "_PDC" (Processor Driver Capabilities) calls.  These _PDC
methods must be evaluated for every processor object.  If these _PDC
calls are not completed for every processor it can lead to
inconsistency and later failures in things like the CPU frequency
driver.

In a Xen system, the dom0 kernel is responsible for system-wide power
management.  The dom0 kernel is in charge of OSPM.  However, the
number of CPUs available to dom0 can be different than the number of
CPUs physically present on the system.

This leads to a problem: the dom0 kernel needs to evaluate _PDC for
all the processors, but it can't always see them.

In dom0 kernels, ignore the existing ACPI method for determining if a
processor is physically present because it might not be accurate.
Instead, ask the hypervisor for this information.

Fix this by introducing a custom function to use when running as Xen
dom0 in order to check whether a processor object matches a CPU that's
online.  Such checking is done using the existing information fetched
by the Xen pCPU subsystem, extending it to also store the ACPI ID.

This ensures that _PDC method gets evaluated for all physically online
CPUs, regardless of the number of CPUs made available to dom0.

Fixes: 5d554a7bb064 ("ACPI: processor: add internal processor_physically_present()")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display/dc/dce60/Makefile: Fix previous attempt to silence known override-init warnings

[ Upstream commit 4082b9f5ead4966797dddcfef0905d59e5a83873 ]

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:157:21: note: in expansion of macro ‘mmCRTC1_DCFE_MEM_LIGHT_SLEEP_CNTL’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.h:170:9: note: in expansion of macro ‘SRI’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:183:17: note: in expansion of macro ‘XFM_COMMON_REG_LIST_DCE60’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:188:17: note: in expansion of macro ‘transform_regs’
 drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_d.h:722:43: warning: initialized field overwritten [-Woverride-init]
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:157:21: note: in expansion of macro ‘mmCRTC2_DCFE_MEM_LIGHT_SLEEP_CNTL’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.h:170:9: note: in expansion of macro ‘SRI’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:183:17: note: in expansion of macro ‘XFM_COMMON_REG_LIST_DCE60’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:189:17: note: in expansion of macro ‘transform_regs’
 drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_d.h:722:43: note: (near initialization for ‘xfm_regs[2].DCFE_MEM_LIGHT_SLEEP_CN

[100 lines snipped for brevity]

Fixes: ceb3cf476a441 ("drm/amd/display/dc/dce60/Makefile: Ignore -Woverride-init warning")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8350-microsoft-surface: fix USB dual-role mode property

[ Upstream commit 0beda02e530f8fc571877939645cb20ade113027 ]

The "dr_mode" is a property of USB DWC3 node, not the Qualcomm wrapper
one:
  sm8350-microsoft-surface-duo2.dtb: usb@a6f8800: 'dr_mode' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+'

Fixes: c16160cfa565 ("arm64: dts: qcom: add minimal DTS for Microsoft Surface Duo 2")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304130315.51595-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

virt/coco/sev-guest: Double-buffer messages

[ Upstream commit 965006103a14703cc42043bbf9b5e0cdf7a468ad ]

The encryption algorithms read and write directly to shared unencrypted
memory, which may leak information as well as permit the host to tamper
with the message integrity. Instead, copy whole messages in or out as
needed before doing any computation on them.

Fixes: d5af44dde546 ("x86/sev: Provide support for SNP guest request NAEs")
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230214164638.1189804-3-dionnaglaze@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: msm: adreno: Disable preemption on Adreno 510

[ Upstream commit 010c8bbad2cb8c33c47963e29f051f1e917e45a5 ]

Downstream driver appears to not support preemption on A510 target,
trying to use one make device slow and fill log with rings related errors.
Set num_rings to 1 to disable preemption.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: e20c9284c8f2 ("drm/msm/adreno: Add support for Adreno 510 GPU")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/526898/
Link: https://lore.kernel.org/r/20230314221757.13096-1-a39.skl@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/adreno: drop bogus pm_runtime_set_active()

[ Upstream commit db7662d076c973072d788bd0e8130e04430307a1 ]

The runtime PM status can only be updated while runtime PM is disabled.

Drop the bogus pm_runtime_set_active() call that was made after enabling
runtime PM and which (incidentally but correctly) left the runtime PM
status set to 'suspended'.

Fixes: 2c087a336676 ("drm/msm/adreno: Load the firmware before bringing up the hardware")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/524972/
Link: https://lore.kernel.org/r/20230303164807.13124-4-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-am62a7: Correct L2 cache size to 512KB

[ Upstream commit 438b8dc949bf45979c32553e96086ff1c6e2504e ]

Per AM62Ax SoC datasheet[0] L2 cache is 512KB.

[0] https://www.ti.com/lit/gpn/am62a7 Page 1.

Fixes: 5fc6b1b62639 ("arm64: dts: ti: Introduce AM62A7 family of SoCs")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230320044935.2512288-2-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-am625: Correct L2 cache size to 512KB

[ Upstream commit 6974371cab1c488a53960945cb139b20ebb5f16b ]

Per AM62x SoC datasheet[0] L2 cache is 512KB.

[0] https://www.ti.com/lit/gpn/am625 Page 1.

Fixes: f1d17330a5be ("arm64: dts: ti: Introduce base support for AM62x SoC")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230320044935.2512288-1-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: max9286: Free control handler

[ Upstream commit bfce6a12e5ba1edde95126aa06778027f16115d4 ]

The control handler is leaked in some probe-time error paths, as well as
in the remove path. Fix it.

Fixes: 66d8c9d2422d ("media: i2c: Add MAX9286 driver")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: adv7533: Fix adv7533_mode_valid for adv7533 and adv7535

[ Upstream commit ee0285e13455fdbce5de315bdbe91b5f198a2a06 ]

When dynamically switching lanes was removed, the intent of the code
was to check to make sure that higher speed items used 4 lanes, but
it had the unintended consequence of removing the slower speeds for
4-lane users.

This attempts to remedy this by doing a check to see that the
max frequency doesn't exceed the chip limit, and a second
check to make sure that the max bit-rate doesn't exceed the
number of lanes * max bit rate / lane.

Fixes: 9a0cdcd6649b ("drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge")
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230319125524.58803-1-aford173@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: qcom_scm: Clear download bit during reboot

[ Upstream commit 781d32d1c9709fd25655c4e3e3e15370ae4ae4db ]

During normal restart of a system download bit should
be cleared irrespective of whether download mode is
set or not.

Fixes: 8c1b7dc9ba22 ("firmware: qcom: scm: Expose download-mode control")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1678979666-551-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: av7110: prevent underflow in write_ts_to_decoder()

[ Upstream commit eed9496a0501357aa326ddd6b71408189ed872eb ]

The buf[4] value comes from the user via ts_play().  It is a value in
the u8 range.  The final length we pass to av7110_ipack_instant_repack()
is "len - (buf[4] + 1) - 4" so add a check to ensure that the length is
not negative.  It's not clear that passing a negative len value does
anything bad necessarily, but it's not best practice.

With the new bounds checking the "if (!len)" condition is no longer
possible or required so remove that.

Fixes: fd46d16d602a ("V4L/DVB (11759): dvb-ttpci: Add TS replay capability")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: decoder implement display delay enable

[ Upstream commit ffa331d9bf9407655fc4c4d57dcc92ed2868e326 ]

amphion vpu support a low latency mode,
when V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE is enabled,
decoder can display frame immediately after it's decoded.
Only h264 is support yet.

Fixes: 6de8d628df6e ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: platform: mtk-mdp3: Add missing check and free for ida_alloc

[ Upstream commit d00f592250782538cda87745607695b0fe27dcd4 ]

Add the check for the return value of the ida_alloc in order to avoid
NULL pointer dereference.
Moreover, free allocated "ctx->id" if mdp_m2m_open fails later in order
to avoid memory leak.

Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: bdisp: Add missing check for create_workqueue

[ Upstream commit 2371adeab717d8fe32144a84f3491a03c5838cfb ]

Add the check for the return value of the create_workqueue
in order to avoid NULL pointer dereference.

Fixes: 28ffeebbb7bd ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/MCE/AMD: Use an u64 for bank_map

[ Upstream commit 4c1cdec319b9aadb65737c3eb1f5cb74bd6aa156 ]

Thee maximum number of MCA banks is 64 (MAX_NR_BANKS), see

  a0bc32b3cacf ("x86/mce: Increase maximum number of banks to 64").

However, the bank_map which contains a bitfield of which banks to
initialize is of type unsigned int and that overflows when those bit
numbers are >= 32, leading to UBSAN complaining correctly:

  UBSAN: shift-out-of-bounds in arch/x86/kernel/cpu/mce/amd.c:1365:38
  shift exponent 32 is too large for 32-bit type 'int'

Change the bank_map to a u64 and use the proper BIT_ULL() macro when
modifying bits in there.

  [ bp: Rewrite commit message. ]

Fixes: a0bc32b3cacf ("x86/mce: Increase maximum number of banks to 64")
Signed-off-by: Muralidhara M K <muralimk@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127151601.1068324-1-muralimk@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node

[ Upstream commit 3b76b736cd9933ff88764ffec01cbd859c1475e7 ]

Unit address of PCIe EP node should be 0x1c00000 as it has to match the
first address specified in the reg property.

This also requires sorting the node in the ascending order.

Fixes: e6b69813283f ("ARM: dts: qcom: sdx55: Add support for PCIe EP")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308082424.140224-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: ipq8064: Fix the PCI I/O port range

[ Upstream commit 0b16b34e491629016109e56747ad64588074194b ]

For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI addresses
(0x0fe00000, 0x31e00000, 0x35e00000) specified in the ranges property for
I/O region.

While at it, let's use the missing 0x prefix for the addresses.

Fixes: 93241840b664 ("ARM: dts: qcom: Add pcie nodes for ipq8064")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-17-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: ipq4019: Fix the PCI I/O port range

[ Upstream commit 2540279e9a9e74fc880d1e4c83754ecfcbe290a0 ]

For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI address
(0x40200000) specified in the ranges property for I/O region.

While at it, let's use the missing 0x prefix for the addresses.

Fixes: 187519403273 ("ARM: dts: ipq4019: Add a few peripheral nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-16-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8450: Fix the PCI I/O port range

[ Upstream commit f57903c8f4c77938eb71fc67e4652264a9fa14f9 ]

For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.

While at it, let's use the missing 0x prefix for the addresses.

Fixes: bc6588bc25fb ("arm64: dts: qcom: sm8450: add PCIe1 root device")
Fixes: 7b09b1b47335 ("arm64: dts: qcom: sm8450: add PCIe0 RC device")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8150: Fix the PCI I/O port range

[ Upstream commit 422b110b9b0af0afd4a4b19e8fc3ceab9e71d842 ]

For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.

While at it, let's use the missing 0x prefix for the addresses.

Fixes: a1c86c680533 ("arm64: dts: qcom: sm8150: Add PCIe nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-12-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: Fix the PCI I/O port range

[ Upstream commit e115a4495db687898b8d91d4f16c2cf55bbf167c ]

For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000, 0x64200000) specified in the ranges property for
I/O region.

While at it, let's use the missing 0x prefix for the addresses.

Fixes: e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996: Fix the PCI I/O port range

[ Upstream commit cf0ac10feb17661987d0018eb9475dc03e2a2253 ]

For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x0c200000, 0x0d200000, 0x0e200000) specified in the ranges property for
I/O region.

While at it, let's also align the entries.

Fixes: ed965ef89227 ("arm64: dts: qcom: msm8996: add support to pcie")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: ipq6018: Fix the PCI I/O port range

[ Upstream commit 75a6e1fdb351189f55097741e8460ca3f9b2883f ]

For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI address
(0x20200000) specified in the ranges property for I/O region.

While at it, let's use the missing 0x prefix for the addresses.

Fixes: 095bbdd9a5c3 ("arm64: dts: qcom: ipq6018: Add pcie support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: ipq8074: Fix the PCI I/O port range

[ Upstream commit e49eafefe5ab325e38dd074f2005076ffc271e54 ]

For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI addresses
(0x10200000, 0x20200000) specified in the ranges property for I/O region.

While at it, let's use the missing 0x prefix for the addresses and align
them in a single line.

Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7280: Fix the PCI I/O port range

[ Upstream commit 1d4743d6312582978966d38908b69085621b7693 ]

For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI address
(0x40200000) specified in the ranges property for I/O region.

Fixes: 92e0ee9f83b3 ("arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8998: Fix the PCI I/O port range

[ Upstream commit c30a27dcfe4545edbda1578b3a63ed6147519cdd ]

For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI address
(0x1b200000) specified in the ranges property for I/O region.

Fixes: b84dfd175c09 ("arm64: dts: qcom: msm8998: Add PCIe PHY and RC nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845: Fix the PCI I/O port range

[ Upstream commit 67aa109eee654c76dcc100554e637fa64d5aa099 ]

For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.

While at it, let's use the missing 0x prefix for the addresses.

Fixes: 42ad231338c1 ("arm64: dts: qcom: sdm845: Add second PCIe PHY and controller")
Fixes: 5c538e09cb19 ("arm64: dts: qcom: sdm845: Add first PCIe controller and PHY")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845: correct dynamic power coefficients

[ Upstream commit 44750f153699b6e4f851a399287e5c8df208d696 ]

While stressing EAS on my dragonboard RB3, I have noticed that LITTLE cores
where never selected as the most energy efficient CPU whatever the
utilization level of waking task.

energy model framework uses its cost field to estimate the energy with
the formula:

  nrg = cost of the selected OPP * utilization / CPU's max capacity

which ends up selecting the CPU with lowest cost / max capacity ration
as long as the utilization fits in the OPP's capacity.

If we compare the cost of a little OPP with similar capacity of a big OPP
like :
       OPP(kHz)   OPP capacity    cost     max capacity   cost/max capacity
LITTLE 1766400    407             351114   407            863
big    1056000    408             520267   1024           508

This can be interpreted as the LITTLE core consumes 70% more than big core
for the same compute capacity.

According to [1], LITTLE consumes 10% less than big core for Coremark
benchmark at those OPPs. If we consider that everything else stays
unchanged, the dynamic-power-coefficient of LITTLE core should be
only 53% of the current value: 290 * 53% = 154

Set the dynamic-power-coefficient of CPU0-3 to 154 to fix the energy model.

[1] https://github.com/kdrag0n/freqbench/tree/master/results/sdm845/main

Fixes: 0e0a8e35d725 ("arm64: dts: qcom: sdm845: correct dynamic power coefficients")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106164618.1845281-1-vincent.guittot@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7280: fix EUD port properties

[ Upstream commit a369c74243ca4ad60b9de0ac5c2207fb4c4117b8 ]

Nodes with unit addresses must have also 'reg' property:

  sc7280-herobrine-crd.dtb: eud@88e0000: ports:port@0: 'reg' is a required property

Fixes: 0b059979090d ("arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308125906.236885-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8998: Fix stm-stimulus-base reg name

[ Upstream commit b5d08f08377218b1d2ab4026e427a7788b271c8e ]

The name stm-data-base comes from ancient (msm-3.10 or older)
downstream kernels. Upstream uses stm-stimulus-base instead. Fix it.

Fixes: 783abfa2249a ("arm64: dts: qcom: msm8998: Add Coresight support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213210331.2106877-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: broadcom: bcmbca: bcm4908: fix procmon nodename

[ Upstream commit f16a8294dd7a02c7ad042cd2e3acc5ea06698dc1 ]

This fixes:
arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: syscon@280000: $nodename:0: 'syscon@280000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
        From schema: schemas/simple-bus.yaml

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144400.21689-3-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: broadcom: bcmbca: bcm4908: fix LED nodenames

[ Upstream commit 23be9f68f933adee8163b8efc9c6bff71410cc7c ]

This fixes:
arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dtb: leds@800: 'led-lan@19', 'led-power@11', 'led-wan-red@12', 'led-wan-white@15', 'led-wps@14' do not match any of the regexes: '^led@[a-f0-9]+$', 'pinctrl-[0-9]+'
        From schema: Documentation/devicetree/bindings/leds/leds-bcm63138.yaml

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144400.21689-2-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt name

[ Upstream commit 5cca02449490e767289bda38db1577e2c375c084 ]

This fixes:
arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: interrupt-names:0: 'nand_ctlrdy' was expected
        From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
        From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144400.21689-1-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-j721e-main: Remove ti,strobe-sel property

[ Upstream commit 4f4b30a777d3e61603119297965343a37be36435 ]

According to latest errata of J721e [1], (i2024) 'MMCSD: Peripherals
Do Not Support HS400' which applies to MMCSD0 subsystem. Speed modes
supported has been already updated but missed dropping 'ti,strobe-sel'
property which is only required by HS400 speed mode.

Thus, drop 'ti,strobe-sel' property from kernel dtsi for J721e SoC.

[1] https://www.ti.com/lit/er/sprz455/sprz455.pdf

Fixes: eb8f6194e807 ("arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Diwakar Dhyani <d-dhyani@ti.com>
Reviewed-by: Nitin Yadav <n-yadav@ti.com>
Link: https://lore.kernel.org/r/20230203073724.29529-1-b-kapoor@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-am62a7-sk: Fix DDR size to full 4GB

[ Upstream commit a1bc0d6084dba8a31831c65318a8a8e46f00906f ]

All revisions of AM62A7-SK board have 4GB LPDDR4 Micron
MT53E2G32D4DE-046 AUT:B memory. Commit 38c4a08c820c ("arm64: dts: ti:
Add support for AM62A7-SK") enabled just 2GB due to a schematics error
in early revision of the board. Fix it by enabling full 4GB available on
the platform.

Design docs: https://www.ti.com/lit/zip/sprr459

Fixes: 38c4a08c820c ("arm64: dts: ti: Add support for AM62A7-SK")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230314094645.3411599-1-devarsht@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-am62-main: Fix GPIO numbers in DT

[ Upstream commit 28c8f2189d80c8b37068c367e9864b5aa530f208 ]

Fix number of gpio pins in main_gpio0 & main_gpio1
DT nodes according to AM62x SK datasheet. The Link
of datasheet is in the following line:
https://www.ti.com/lit/ds/symlink/am625.pdf?ts=1673852494660

Section: 6.3.10 GPIO (Page No. 63-67)

Fixes: f1d17330a5be ("arm64: dts: ti: Introduce base support for AM62x SoC")
Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230202085917.3044567-1-n-yadav@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: Shorten off-on-delay-us for always-on/boot-on by time since booted

[ Upstream commit 691c1fcda5351ed98a44610b7dccc0e3ee920020 ]

This is very close to a straight revert of commit 218320fec294
("regulator: core: Fix off-on-delay-us for always-on/boot-on
regulators"). We've identified that patch as causing a boot speed
regression on sc7180-trogdor boards. While boot speed certainly isn't
more important than making sure that power sequencing is correct,
looking closely at the original change it doesn't seem to have been
fully justified. It mentions "cycling issues" without describing
exactly what the issues were. That means it's possible that the
cycling issues were really a problem that should be fixed in a
different way.

Let's take a careful look at how we should handle regulators that have
an off-on-delay and that are boot-on or always-on. Linux currently
doesn't have any way to identify whether a GPIO regulator was already
on when the kernel booted. That means that when the kernel boots we
probe a regulator, see that it wants boot-on / always-on we, and then
turn the regulator on. We could be in one of two cases when we do
this:

a) The regulator might have been left on by the bootloader and we're
   ensuring that it stays on.
b) The regulator might have been left off by the bootloader and we're
   just now turning it on.

For case a) we definitely don't need any sort of delay. For case b) we
_might_ need some delay in case the bootloader turned the regulator
off _right_ before booting the kernel. To get the proper delay for
case b) then we can just assume a `last_off` of 0, which is what it
gets initialized to by default.

As per above, we can't tell whether we're in case a) or case b) so
we'll assume the longer delay (case b). This basically puts the code
to how it was before commit 218320fec294 ("regulator: core: Fix
off-on-delay-us for always-on/boot-on regulators"). However, we add
one important change: we make sure that the delay is actually honored
if `last_off` is 0. Though the original "cycling issues" cited were
vague, I'm hopeful that this important extra change will be enough to
fix the issues that the initial commit mentioned.

With this fix, I've confined that on a sc7180-trogdor board the delay
at boot goes down from 500 ms to ~250 ms. That's not as good as the 0
ms that we had prior to commit 218320fec294 ("regulator: core: Fix
off-on-delay-us for always-on/boot-on regulators"), but it's probably
safer because we don't know if the bootloader turned the regulator off
right before booting.

One note is that it's possible that we could be in a state that's not
a) or b) if there are other issues in the kernel. The only one I can
think of is related to pinctrl. If the pinctrl driver being used on a
board isn't careful about avoiding glitches when setting up a pin then
it's possible that setting up a pin could cause the regulator to "turn
off" briefly immediately before the regulator probes. If this is
indeed causing problems then the pinctrl driver should be fixed,
perhaps in a similar way to what was done in commit d21f4b7ffc22
("pinctrl: qcom: Avoid glitching lines when we first mux to output")

Fixes: 218320fec294 ("regulator: core: Fix off-on-delay-us for always-on/boot-on regulators")
Cc: Christian Kohlschütter <christian@kohlschutter.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230313111806.1.I2eaad872be0932a805c239a7c7a102233fb0b03b@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom-apq8064: Fix opp table child name

[ Upstream commit b9745c275246a7e43c34d1b3be5ff9a9f3cf9305 ]

The opp-320000000 name is rather misleading with the opp-hz value
of 450 MHz. Fix it!

Fixes: 8db0b6c7b636 ("ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230220120831.1591820-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

EDAC/skx: Fix overflows on the DRAM row address mapping arrays

[ Upstream commit 71b1e3ba3fed5a34c5fac6d3a15c2634b04c1eb7 ]

The current DRAM row address mapping arrays skx_{open,close}_row[]
only support ranks with sizes up to 16G. Decoding a rank address
to a DRAM row address for a 32G rank by using either one of the
above arrays by the skx_edac driver, will result in an overflow on
the array.

For a 32G rank, the most significant DRAM row address bit (the
bit17) is mapped from the bit34 of the rank address. Add this new
mapping item to both arrays to fix the overflow issue.

Fixes: 4ec656bdf43a ("EDAC, skx_edac: Add EDAC driver for Skylake")
Reported-by: Feng Xu <feng.f.xu@intel.com>
Tested-by: Feng Xu <feng.f.xu@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20230211011728.71764-1-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/disp/dpu: check for crtc enable rather than crtc active to release shared resources

[ Upstream commit b6975693846b562c4d3e0e60cc884affc5bdac00 ]

According to KMS documentation, The driver must not release any shared
resources if active is set to false but enable still true.

Fixes: ccc862b957c6 ("drm/msm/dpu: Fix reservation failures in modeset")
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524726/
Link: https://lore.kernel.org/r/1677774797-31063-5-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: dp: Only trigger DRM HPD events if bridge is attached

[ Upstream commit 36b617f7e4ae663fcadd202ea061ca695ca75539 ]

The MediaTek DisplayPort interface bridge driver starts its interrupts
as soon as its probed. However when the interrupts trigger the bridge
might not have been attached to a DRM device. As drm_helper_hpd_irq_event()
does not check whether the passed in drm_device is valid or not, a NULL
pointer passed in results in a kernel NULL pointer dereference in it.

Check whether the bridge is attached and only trigger an HPD event if
it is.

Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230202045734.2773503-1-wenst@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r9a07g043: Update IRQ numbers for SSI channels

[ Upstream commit 2a5c9891392dca47f6865a2add1986876e40849c ]

From R01UH0968EJ0100 Rev.1.00 HW manual the interrupt numbers for SSI
channels have been updated,

SPI 329 - SSIF0 is now marked as reserved
SPI 333 - SSIF1 is now marked as reserved
SPI 335 - SSIF2 is now marked as reserved
SPI 336 - SSIF2 is now marked as reserved
SPI 341 - SSIF3 is now marked as reserved

This patch drops the above IRQs from SoC DTSI.

Fixes: 559f2b0708c70 ("arm64: dts: renesas: r9a07g043: Add SSI{1,2,3} nodes and fillup the SSI0 stub node")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230217185225.43310-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r9a07g043: Introduce SOC_PERIPHERAL_IRQ() macro to specify interrupt property

[ Upstream commit 49669da644cf000eb79dbede55bd04acf3f2f0a0 ]

Introduce SOC_PERIPHERAL_IRQ() macro to specify interrupt property so
that we can share the common parts of the SoC DTSI with the RZ/Five
(RISC-V) SoC and the RZ/G2UL (ARM64) SoC.

This patch adds a new file r9a07g043u.dtsi to separate out RZ/G2UL
(ARM64) SoC specific parts.  No functional changes (same DTB).

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221025220629.79321-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: 2a5c9891392d ("arm64: dts: renesas: r9a07g043: Update IRQ numbers for SSI channels")
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r9a07g054: Update IRQ numbers for SSI channels

[ Upstream commit c2b0dc0e83ef4a74cbe381fd0c84cea16cf067f0 ]

From R01UH0936EJ0120 Rev.1.20 HW manual the interrupt numbers for SSI
channels have been updated,

SPI 329 - SSIF0 is now marked as reserved
SPI 333 - SSIF1 is now marked as reserved
SPI 335 - SSIF2 is now marked as reserved
SPI 336 - SSIF2 is now marked as reserved
SPI 341 - SSIF3 is now marked as reserved

This patch drops the above IRQs from SoC DTSI.

Fixes: cd0339ec25895c0b ("arm64: dts: renesas: r9a07g054: Add SSI{1,2,3} nodes and fillup the SSI0 stub node")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230217185225.43310-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r9a07g044: Update IRQ numbers for SSI channels

[ Upstream commit 5da750ddd96454757a3b467e968e3fb70bb12bc8 ]

From R01UH0914EJ0120 Rev.1.20 HW manual the interrupt numbers for SSI
channels have been updated,

SPI 329 - SSIF0 is now marked as reserved
SPI 333 - SSIF1 is now marked as reserved
SPI 335 - SSIF2 is now marked as reserved
SPI 336 - SSIF2 is now marked as reserved
SPI 341 - SSIF3 is now marked as reserved

This patch drops the above IRQs from SoC DTSI.

Fixes: 92a341315afc9 ("arm64: dts: renesas: r9a07g044: Add SSI support")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230217185225.43310-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r8a774c0: Remove bogus voltages from OPP table

[ Upstream commit 554edc3e9239bb81e61be9f0f5dbbeb528a69e72 ]

According to the RZ/G Series, 2nd Generation Hardware User’s Manual
Rev. 1.11, the System CPU cores on RZ/G2E do not have their own power
supply, but use the common internal power supply (typical 1.03V).

Hence remove the "opp-microvolt" properties from the Operating
Performance Points table.  They are optional, and unused, when none of
the CPU nodes is tied to a regulator using the "cpu-supply" property.

Fixes: 231d8908a66fa98f ("arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8348e18a011ded94e35919cd8e17c0be1f9acf2f.1676560856.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r8a77990: Remove bogus voltages from OPP table

[ Upstream commit fb76b0fae3ca880363214e1dcd6513ab8bd529e7 ]

According to the R-Car Series, 3rd Generation Hardware User’s Manual
Rev. 2.30, the System CPU cores on R-Car E3 do not have their own power
supply, but use the common internal power supply (typical 1.03V).

Hence remove the "opp-microvolt" properties from the Operating
Performance Points table.  They are optional, and unused, when none of
the CPU nodes is tied to a regulator using the "cpu-supply" property.

Fixes: dd7188eb4ed128dc ("arm64: dts: renesas: r8a77990: Add OPPs table for cpu devices")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9232578d9d395d529f64db3333a371e31327f459.1676560856.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: ti: pm33xx: Fix refcount leak in am33xx_pm_probe

[ Upstream commit 8f3c307b580a4a6425896007325bddefc36e8d91 ]

wkup_m3_ipc_get() takes refcount, which should be freed by
wkup_m3_ipc_put(). Add missing refcount release in the error paths.

Fixes: 5a99ae0092fe ("soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230106054022.947529-1-linmq006@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/x86/kcpuid: Fix avx512bw and avx512lvl fields in Fn00000007

[ Upstream commit 4e347bdf44c1fd4296a7b9657a2c0e1bd900fa50 ]

Leaf Fn00000007 contains avx512bw at bit 26 and avx512vl at bit 28. This
is incorrect per the SDM. Correct avx512bw to be bit 30 and avx512lvl to
be bit 31.

Fixes: c6b2f240bf8d ("tools/x86: Add a kcpuid tool to show raw CPU features")
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20230206141832.4162264-2-terry.bowman@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: register a vga_switcheroo client for MacBooks with apple-gmux

[ Upstream commit d37a3929ca0363ed1dce02b2772cd5bc547ca66d ]

Commit 3840c5bcc245 ("drm/amdgpu: disentangle runtime pm and
vga_switcheroo") made amdgpu only register a vga_switcheroo client for
GPU's with PX, however AMD GPUs in dual gpu Apple Macbooks do need to
register, but don't have PX. Instead of AMD's PX, they use apple-gmux.

Use apple_gmux_detect() to identify these gpus, and
pci_is_thunderbolt_attached() to ensure eGPUs connected to Dual GPU
Macbooks don't register with vga_switcheroo.

Fixes: 3840c5bcc245 ("drm/amdgpu: disentangle runtime pm and vga_switcheroo")
Link: https://lore.kernel.org/amd-gfx/20230210044826.9834-10-orlandoch.dev@gmail.com/
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/probe-helper: Cancel previous job before starting new one

[ Upstream commit a8e47884f1906cd7440fafa056adc8817568e73e ]

Currently we schedule a call to output_poll_execute from
drm_kms_helper_poll_enable for 10s in future. Later we try to replace
that in drm_helper_probe_single_connector_modes with a 0s schedule with
delayed_event set.

But as there is already a job in the queue this fails, and the immediate
job we wanted with delayed_event set doesn't occur until 10s later.

And that call acts as if connector state has changed, reprobing modes.
This has a side effect of waking up a display that has been blanked.

Make sure we cancel the old job before submitting the immediate one.

Fixes: 162b6a57ac50 ("drm/probe-helper: don't lose hotplug event")
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
[Maxime: Switched to mod_delayed_work]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127154052.452524-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vgem: add missing mutex_destroy

[ Upstream commit 7c18189b14b33c1fbf76480b1bd217877c086e67 ]

vgem_fence_open() instantiates a mutex for a particular fence
instance, but never destroys it by calling mutex_destroy() in
vgem_fence_close().

So, add the missing mutex_destroy() to guarantee proper resource
destruction.

Fixes: 407779848445 ("drm/vgem: Attach sw fences to exported vGEM dma-buf (ioctl)")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202125517.427976-1-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/dg2: Drop one PCI ID

[ Upstream commit 3a38be31ec82920a871963c086393bc0ba26a655 ]

The bspec was recently updated to remove PCI ID 0x5698; this ID is
actually reserved for future use and should not be treated as DG2-G11.

Bspec: 44477
Fixes: 8618b8489ba6 ("drm/i915: DG2 and ATS-M device ID updates")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208200905.680865-1-matthew.d.roper@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/rockchip: Drop unbalanced obj unref

[ Upstream commit 8ee3b0e85f6ccd9e6c527bc50eaba774c3bb18d0 ]

In the error path, rockchip_drm_gem_object_mmap() is dropping an obj
reference that it doesn't own.

Fixes: 41315b793e13 ("drm/rockchip: use drm_gem_mmap helpers")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119231734.2884543-1-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

erofs: fix potential overflow calculating xattr_isize

[ Upstream commit 1b3567a1969b26f709d82a874498c0754ea841c3 ]

Given on-disk i_xattr_icount is 16 bits and xattr_isize is calculated
from i_xattr_icount multiplying 4, xattr_isize has a theoretical maximum
of 256K (64K * 4).

Thus declare xattr_isize as unsigned int to avoid the potential overflow.

Fixes: bfb8674dc044 ("staging: erofs: add erofs in-memory stuffs")
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230414061810.6479-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

erofs: initialize packed inode after root inode is assigned

[ Upstream commit cb9bce79514392a9a216ff67148e05e2d72c28bd ]

As commit 8f7acdae2cd4 ("staging: erofs: kill all failure handling in
fill_super()"), move the initialization of packed inode after root
inode is assigned, so that the iput() in .put_super() is adequate as
the failure handling.

Otherwise, iput() is also needed in .kill_sb(), in case of the mounting
fails halfway.

Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Fixes: b15b2e307c3a ("erofs: support on-disk compressed fragments data")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230407141710.113882-3-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

erofs: stop parsing non-compact HEAD index if clusterofs is invalid

[ Upstream commit cc4efd3dd2ac9f89143e5d881609747ecff04164 ]

Syzbot generated a crafted image [1] with a non-compact HEAD index of
clusterofs 33024 while valid numbers should be 0 ~ lclustersize-1,
which causes the following unexpected behavior as below:

 BUG: unable to handle page fault for address: fffff52101a3fff9
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 23ffed067 P4D 23ffed067 PUD 0
 Oops: 0000 [#1] PREEMPT SMP KASAN
 CPU: 1 PID: 4398 Comm: kworker/u5:1 Not tainted 6.3.0-rc6-syzkaller-g09a9639e56c0 #0
 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023
 Workqueue: erofs_worker z_erofs_decompressqueue_work
 RIP: 0010:z_erofs_decompress_queue+0xb7e/0x2b40
 ...
 Call Trace:
  <TASK>
  z_erofs_decompressqueue_work+0x99/0xe0
  process_one_work+0x8f6/0x1170
  worker_thread+0xa63/0x1210
  kthread+0x270/0x300
  ret_from_fork+0x1f/0x30

Note that normal images or images using compact indexes are not
impacted.  Let's fix this now.

[1] https://lore.kernel.org/r/000000000000ec75b005ee97fbaa@google.com

Reported-and-tested-by: syzbot+aafb3f37cfeb6534c4ac@syzkaller.appspotmail.com
Fixes: 02827e1796b3 ("staging: erofs: add erofs_map_blocks_iter")
Fixes: 152a333a5895 ("staging: erofs: add compacted compression indexes support")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230410173714.104604-1-hsiangkao@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm, tpm_tis: Claim locality when interrupts are reenabled on resume

[ Upstream commit 955df4f87760b3bb2af253d3fbb12fb712b3ffa6 ]

In tpm_tis_resume() make sure that the locality has been claimed when
tpm_tis_reenable_interrupts() is called. Otherwise the writings to the
register might not have any effect.

Fixes: 45baa1d1fa39 ("tpm_tis: Re-enable interrupts upon (S3) resume")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm, tpm: Implement usage counter for locality

[ Upstream commit 7a2f55d0be296c4e81fd782f3d6c43ed4ec7e265 ]

Implement a usage counter for the (default) locality used by the TPM TIS
driver:
Request the locality from the TPM if it has not been claimed yet, otherwise
only increment the counter. Also release the locality if the counter is 0
otherwise only decrement the counter. Since in case of SPI the register
accesses are locked by means of the SPI bus mutex use a sleepable lock
(i.e. also a mutex) to ensure thread-safety of the counter which may be
accessed by both a userspace thread and the interrupt handler.

By doing this refactor the names of the amended functions to use a more
appropriate prefix.

Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Stable-dep-of: 955df4f87760 ("tpm, tpm_tis: Claim locality when interrupts are reenabled on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm, tpm_tis: Claim locality before writing interrupt registers

[ Upstream commit 15d7aa4e46eba87242a320f39773aa16faddadee ]

In tpm_tis_probe_single_irq() interrupt registers TPM_INT_VECTOR,
TPM_INT_STATUS and TPM_INT_ENABLE are modified to setup the interrupts.
Currently these modifications are done without holding a locality thus they
have no effect. Fix this by claiming the (default) locality before the
registers are written.

Since now tpm_tis_gen_interrupt() is called with the locality already
claimed remove locality request and release from this function.

Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Stable-dep-of: 955df4f87760 ("tpm, tpm_tis: Claim locality when interrupts are reenabled on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm, tpm_tis: Disable interrupts if tpm_tis_probe_irq() failed

[ Upstream commit 6d789ad726950e612a7f31044260337237c5b490 ]

Both functions tpm_tis_probe_irq_single() and tpm_tis_probe_irq() may setup
the interrupts and then return with an error. This case is indicated by a
missing TPM_CHIP_FLAG_IRQ flag in chip->flags.
Currently the interrupt setup is only undone if tpm_tis_probe_irq_single()
fails. Undo the setup also if tpm_tis_probe_irq() fails.

Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Stable-dep-of: 955df4f87760 ("tpm, tpm_tis: Claim locality when interrupts are reenabled on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm, tpm_tis: Claim locality before writing TPM_INT_ENABLE register

[ Upstream commit 282657a8bd7fddcf511b834f43705001668b33a7 ]

In disable_interrupts() the TPM_GLOBAL_INT_ENABLE bit is unset in the
TPM_INT_ENABLE register to shut the interrupts off. However modifying the
register is only possible with a held locality. So claim the locality
before disable_interrupts() is called.

Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Stable-dep-of: 955df4f87760 ("tpm, tpm_tis: Claim locality when interrupts are reenabled on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm, tpm_tis: Do not skip reset of original interrupt vector

[ Upstream commit ed9be0e6c892a783800d77a41ca4c7255c6af8c5 ]

If in tpm_tis_probe_irq_single() an error occurs after the original
interrupt vector has been read, restore the interrupts before the error is
returned.

Since the caller does not check the error value, return -1 in any case that
the TPM_CHIP_FLAG_IRQ flag is not set. Since the return value of function
tpm_tis_gen_interrupt() is not longer used, make it a void function.

Fixes: 1107d065fdf1 ("tpm_tis: Introduce intermediate layer for TPM access")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selinux: ensure av_permissions.h is built when needed

[ Upstream commit 4ce1f694eb5d8ca607fed8542d32a33b4f1217a5 ]

The Makefile rule responsible for building flask.h and
av_permissions.h only lists flask.h as a target which means that
av_permissions.h is only generated when flask.h needs to be
generated.  This patch fixes this by adding av_permissions.h as a
target to the rule.

Fixes: 8753f6bec352 ("selinux: generate flask headers during kernel build")
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selinux: fix Makefile dependencies of flask.h

[ Upstream commit bcab1adeaad4b39a1e04cb98979a367d08253f03 ]

Make the flask.h target depend on the genheaders binary instead of
classmap.h to ensure that it is rebuilt if any of the dependencies of
genheaders are changed.

Notably this fixes flask.h not being rebuilt when
initial_sid_to_string.h is modified.

Fixes: 8753f6bec352 ("selinux: generate flask headers during kernel build")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/resctrl: Check for return value after write_schemata()

[ Upstream commit 0d45c83b95da414e98ad333e723141a94f6e2c64 ]

MBA test case writes schemata but it does not check if the write is
successful or not.

Add the error check and return error properly.

Fixes: 01fee6b4d1f9 ("selftests/resctrl: Add MBA test")
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/resctrl: Allow ->setup() to return errors

[ Upstream commit fa10366cc6f4cc862871f8938426d85c2481f084 ]

resctrl_val() assumes ->setup() always returns either 0 to continue
tests or < 0 in case of the normal termination of tests after x runs.
The latter overlaps with normal error returns.

Define END_OF_TESTS (=1) to differentiate the normal termination of
tests and return errors as negative values. Alter callers of ->setup()
to handle errors properly.

Fixes: 790bf585b0ee ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Fixes: ecdbb911f22d ("selftests/resctrl: Add MBM test")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/resctrl: Move ->setup() call outside of test specific branches

[ Upstream commit c90b3b588e369c20087699316259fa5ebbb16f2d ]

resctrl_val() function is called only by MBM, MBA, and CMT tests which
means the else branch is never used.

Both test branches call param->setup().

Remove the unused else branch and place the ->setup() call outside of
the test specific branches reducing code duplication.

Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: fa10366cc6f4 ("selftests/resctrl: Allow ->setup() to return errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/resctrl: Return NULL if malloc_and_init_memory() did not alloc mem

[ Upstream commit 22a8be280383812235131dda18a8212a59fadd2d ]

malloc_and_init_memory() in fill_buf isn't checking if memalign()
successfully allocated memory or not before accessing the memory.

Check the return value of memalign() and return NULL if allocating
aligned memory fails.

Fixes: a2561b12fe39 ("selftests/resctrl: Add built in benchmark")
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check

[ Upstream commit db7b464df9d820186e98a65aa6a10f0d51fbf8ce ]

This commit adds checks for the TICK_DEP_MASK_RCU_EXP bit, thus enabling
RCU expedited grace periods to actually force-enable scheduling-clock
interrupts on holdout CPUs.

Fixes: df1e849ae455 ("rcu: Enable tick for nohz_full CPUs slow to provide expedited QS")
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: fix bug in the order of lines in debugfs logs

[ Upstream commit f9a301c3317daa921375da0aec82462ddf019928 ]

Fix bug in debugfs logs that causes an incorrect order of lines in the
debugfs log.

Currently, the test counts lines that show the number of tests passed,
failed, and skipped, as well as any suite diagnostic lines,
appear prior to the individual results, which is a bug.

Ensure the order of printing for the debugfs log is correct. Additionally,
add a KTAP header to so the debugfs logs can be valid KTAP.

This is an example of a log prior to these fixes:

     KTAP version 1

     # Subtest: kunit_status
     1..2
 # kunit_status: pass:2 fail:0 skip:0 total:2
 # Totals: pass:2 fail:0 skip:0 total:2
     ok 1 kunit_status_set_failure_test
     ok 2 kunit_status_mark_skipped_test
 ok 1 kunit_status

Note the two lines with stats are out of order. This is the same debugfs
log after the fixes (in combination with the third patch to remove the
extra line):

 KTAP version 1
 1..1
     KTAP version 1
     # Subtest: kunit_status
     1..2
     ok 1 kunit_status_set_failure_test
     ok 2 kunit_status_mark_skipped_test
 # kunit_status: pass:2 fail:0 skip:0 total:2
 # Totals: pass:2 fail:0 skip:0 total:2
 ok 1 kunit_status

Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: improve KTAP compliance of KUnit test output

[ Upstream commit 6c738b52316c58ae8a87abf0907f87a7b5e7a109 ]

Change KUnit test output to better comply with KTAP v1 specifications
found here: https://kernel.org/doc/html/latest/dev-tools/ktap.html.
1) Use "KTAP version 1" instead of "TAP version 14" as test output header
2) Remove '-' between test number and test name on test result lines
2) Add KTAP version lines to each subtest header as well

Note that the new KUnit output still includes the “# Subtest” line now
located after the KTAP version line. This does not completely match the
KTAP v1 spec but since it is classified as a diagnostic line, it is not
expected to be disruptive or break any existing parsers. This
“# Subtest” line comes from the TAP 14 spec
(https://testanything.org/tap-version-14-specification.html) and it is
used to define the test name before the results.

Original output:

 TAP version 14
 1..1
   # Subtest: kunit-test-suite
   1..3
   ok 1 - kunit_test_1
   ok 2 - kunit_test_2
   ok 3 - kunit_test_3
 # kunit-test-suite: pass:3 fail:0 skip:0 total:3
 # Totals: pass:3 fail:0 skip:0 total:3
 ok 1 - kunit-test-suite

New output:

 KTAP version 1
 1..1
   KTAP version 1
   # Subtest: kunit-test-suite
   1..3
   ok 1 kunit_test_1
   ok 2 kunit_test_2
   ok 3 kunit_test_3
 # kunit-test-suite: pass:3 fail:0 skip:0 total:3
 # Totals: pass:3 fail:0 skip:0 total:3
 ok 1 kunit-test-suite

Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: f9a301c3317d ("kunit: fix bug in the order of lines in debugfs logs")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dt-bindings: qcom,lpass-rx-macro: correct minItems for clocks

commit 59257015ac8813d2430988aa01c2f4609a60e8e7 upstream.

The RX macro codec comes on some platforms in two variants - ADSP
and ADSP bypassed - thus the clock-names varies from 3 to 5.  The clocks
must vary as well:

  sc7280-idp.dtb: codec@3200000: clocks: [[202, 8], [202, 7], [203]] is too short

Fixes: 852fda58d99a ("ASoC: qcom: dt-bindings: Update bindings for clocks in lpass digital codes")
Cc: <stable@vger.kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230330071333.24308-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: host: Range check CHDBOFF and ERDBOFF

commit 6a0c637bfee69a74c104468544d9f2a6579626d0 upstream.

If the value read from the CHDBOFF and ERDBOFF registers is outside the
range of the MHI register space then an invalid address might be computed
which later causes a kernel panic.  Range check the read value to prevent
a crash due to bad data from the device.

Fixes: 6cd330ae76ff ("bus: mhi: core: Add support for ringing channel/event ring doorbells")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1679674384-27209-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: host: Use mhi_tryset_pm_state() for setting fw error state

commit 1d1493bdc25f498468a606a4ece947d155cfa3a9 upstream.

If firmware loading fails, the controller's pm_state is updated to
MHI_PM_FW_DL_ERR unconditionally.  This can corrupt the pm_state as the
update is not done under the proper lock, and also does not validate
the state transition.  The firmware loading can fail due to a detected
syserr, but if MHI_PM_FW_DL_ERR is unconditionally set as the pm_state,
the handling of the syserr can break when it attempts to transition from
syserr detect, to syserr process.

By grabbing the lock, we ensure we don't race with some other pm_state
update.  By using mhi_try_set_pm_state(), we check that the transition
to MHI_PM_FW_DL_ERR is valid via the state machine logic.  If it is not
valid, then some other transition is occurring like syserr processing, and
we assume that will resolve the firmware loading error.

Fixes: 12e050c77be0 ("bus: mhi: core: Move to an error state on any firmware load failure")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1681142292-27571-3-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: host: Remove duplicate ee check for syserr

commit d469d9448a0f1a33c175d3280b1542fa0158ad7a upstream.

If we detect a system error via intvec, we only process the syserr if the
current ee is different than the last observed ee.  The reason for this
check is to prevent bhie from running multiple times, but with the single
queue handling syserr, that is not possible.

The check can cause an issue with device recovery.  If PBL loads a bad SBL
via BHI, but that SBL hangs before notifying the host of an ee change,
then issuing soc_reset to crash the device and retry (after supplying a
fixed SBL) will not recover the device as the host will observe a PBL->PBL
transition and not process the syserr.  The device will be stuck until
either the driver is reloaded, or the host is rebooted.  Instead, remove
the check so that we can attempt to recover the device.

Fixes: ef2126c4e2ea ("bus: mhi: core: Process execution environment changes serially")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1681142292-27571-2-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl/hdm: Fail upon detecting 0-sized decoders

commit 7701c8bef4f14bd9f7940c6ed0e6a73584115a96 upstream.

Decoders committed with 0-size lead to later crashes on shutdown as
__cxl_dpa_release() assumes a 'struct resource' has been established in
the in 'cxlds->dpa_res'. Just fail the driver load in this instance
since there are deeper problems with the enumeration or the setup when
this happens.

Fixes: 9c57cde0dcbd ("cxl/hdm: Enumerate allocated DPA")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/168149843516.792294.11872242648319572632.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: don't consider future format versions valid

commit aa88019851a85df80cb77f143758b13aee09e3d9 upstream.

In commit fe08cc504448 we reworked the valid superblock version
checks. If it is a V5 filesystem, it is always valid, then we
checked if the version was less than V4 (reject) and then checked
feature fields in the V4 flags to determine if it was valid.

What we missed was that if the version is not V4 at this point,
we shoudl reject the fs. i.e. the check current treats V6+
filesystems as if it was a v4 filesystem. Fix this.

cc: stable@vger.kernel.org
Fixes: fe08cc504448 ("xfs: open code sb verifier feature checks")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>