scsi: scsi_debug: fix group_number mask

Various cdb masks incorrectly assumed the GROUP NUMBER field
was 5 bits long. It is actually 6 bits long. Correct.
Also fix mask failure (in same byte) to allow DLD0 in READ(16)
and WRITE(16).

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_debug: tab, kstrto changes

Some of my development tools tend to add spaces (my preference) rather
than tabs (kernel convention). Running unexpand to clean these spaces
up found more of them than checkpatch.pl did. Then checkpatch.pl
complained about other style violations in those newly tabbed lines.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: lockless command submission

Performance improvement using block layer tag.

Curent driver gets scsiio tracker and free smid from link list and array
based tracking managed by driver.  Accessing list in main io path is
performance pentaly because of protection using spinlock
"scsi_lookup_lock".

In this patch:

1. Driver removes all link list access from main io path and
   use scmd->request->tag to get free smid.

2. Instead of holding 'struct scsiio_tracker' in its own pool
   driver can embed it into the scsi command.

Driver provides cmd_size in scsi_host_template, so that struct
scsiio_tracker is preallocated by scsi mid layer for each scsi command.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: simplify _wait_for_commands_to_complete()

Use 'host_busy' instead of counting outstanding commands by hand.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: simplify mpt3sas_scsi_issue_tm()

Move the check for outstanding commands out of the function allowing us
to simplify the overall code.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: simplify task management functions

No functional change. Code optimization.

One can simply check 'target_busy' or 'device_busy' when figuring out if
there are outstanding commands; no need to painstakingly count them by
hand.

[mkp: tweaked patch description]

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: always use first reserved smid for ioctl passthrough

ioctl passthrough commands require a SCSIIO smid, but cannot easily
integrate with the block layer. But the driver already has reserved some
SCSIIO smids and we're only ever allowing one ioctl command at a time we
can use the first reserved smid for ioctl commands.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: check command status before attempting abort

When attempting a command abort we should check the command status prior
to sending the abort; the command might've been completed already.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Introduce mpt3sas_get_st_from_smid()

Abstract accesses to the scsi_lookup array by introducing
mpt3sas_get_st_from_smid().

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: open-code _scsih_scsi_lookup_get()

Just a wrapper around the scsi lookup array and only used in one place,
so open-code it.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: separate out _base_recovery_check()

No functional change.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: use list_splice_init()

Use 'list_splice_init()' instead of hand-crafted function.  No
functional change.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: set default value for cb_idx

No functional change

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: cxlflash: Staging to support future accelerators

As staging to support future accelerator transports, add a shim layer
such that the underlying services the cxlflash driver requires can be
conditional upon the accelerator infrastructure.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: cxlflash: Adapter context init can return error

Adapter context creation can return either NULL or an error pointer.
Updating the check condition to reflect this.

Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: cxlflash: Remove embedded CXL work structures

The CXL-specific work structure used to request the number of interrupts
currently resides as a nested member of both the context information and
hardware queue structures. It is used to cache values (specifically the
number of interrupts) required by the CXL layer when starting a context.

To facilitate staging that will ultimately allow the cxlflash core to
become agnostic of the underlying accelerator transport, remove these
embedded work structures.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: cxlflash: Explicitly cache number of interrupts per context

The number of interrupts a user requests during a context attach is
presently stored within the CXL work ioctl structure that is nested
alongside the per context metadata. Keeping this data in a structure
that is tied to a particular hardware implementation (CXL) will only
complicate matters when supporting newer accelerator transports.

Instead of relying upon the number of interrupts being cached within
a CXL-specific structure, explicitly cache the value within the context
information structure.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: cxlflash: Update cxl-specific arguments to generic cookie

Convert cxl-specific pointers to generic cookies to facilitate future
enhancements.

Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: cxlflash: Reset command ioasc

In the event of a command failure, cxlflash returns the failure to the upper
layers to process. After processing the error, when the command is queued
again, the private command structure will not be zeroed and the ioasc could be
stale. Per the SISLite specification, the AFU only sets the ioasc in the
presence of a failure. Thus, even though the original command succeeds the
second time, the command is considered a failure due to stale ioasc. This
cycle repeats indefinitely and can cause a hang or IO failure.

To fix the issue, clear the ioasc before queuing any command.

[mkp: added Cc: stable per request]

Fixes: 479ad8e9d48c ("scsi: cxlflash: Remove zeroing of private command data")
Cc: <stable@vger.kernel.org>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: notify event PORTE_BROADCAST_RCVD in sas_enable_revalidation()

There are two places queuing the disco event DISCE_REVALIDATE_DOMAIN.
One is in sas_porte_broadcast_rcvd() and uses sas_chain_event() to queue
the event. The other is in sas_enable_revalidation() and uses
sas_queue_event() to queue the event. We have diffrent work queues for
event and discovery now, so the DISCE_REVALIDATE_DOMAIN event may be
processed in both event queue and discovery queue.

Now since we do synchronous event handling, we cannot do it in discovery
queue, so have to trigger a fake broadcast event to re-trigger the
revalidation from event queue.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: direct call probe and destruct

In commit 87c8331fcf72 ("[SCSI] libsas: prevent domain rediscovery
competing with ata error handling") introduced disco mutex to prevent
rediscovery competing with ata error handling and put the whole
revalidation in the mutex. But the rphy add/remove needs to wait for the
error handling which also grabs the disco mutex. This may leads to dead
lock.So the probe and destruct event were introduce to do the rphy
add/remove asynchronously and out of the lock.

The asynchronously processed workers makes the whole discovery process
not atomic, the other events may interrupt the process. For example,
if a loss of signal event inserted before the probe event, the
sas_deform_port() is called and the port will be deleted.

And sas_port_delete() may run before the destruct event, but the
port-x:x is the top parent of end device or expander. This leads to
a kernel WARNING such as:

[   82.042979] sysfs group 'power' not found for kobject 'phy-1:0:22'
[   82.042983] ------------[ cut here ]------------
[   82.042986] WARNING: CPU: 54 PID: 1714 at fs/sysfs/group.c:237
sysfs_remove_group+0x94/0xa0
[   82.043059] Call trace:
[   82.043082] [<ffff0000082e7624>] sysfs_remove_group+0x94/0xa0
[   82.043085] [<ffff00000864e320>] dpm_sysfs_remove+0x60/0x70
[   82.043086] [<ffff00000863ee10>] device_del+0x138/0x308
[   82.043089] [<ffff00000869a2d0>] sas_phy_delete+0x38/0x60
[   82.043091] [<ffff00000869a86c>] do_sas_phy_delete+0x6c/0x80
[   82.043093] [<ffff00000863dc20>] device_for_each_child+0x58/0xa0
[   82.043095] [<ffff000008696f80>] sas_remove_children+0x40/0x50
[   82.043100] [<ffff00000869d1bc>] sas_destruct_devices+0x64/0xa0
[   82.043102] [<ffff0000080e93bc>] process_one_work+0x1fc/0x4b0
[   82.043104] [<ffff0000080e96c0>] worker_thread+0x50/0x490
[   82.043105] [<ffff0000080f0364>] kthread+0xfc/0x128
[   82.043107] [<ffff0000080836c0>] ret_from_fork+0x10/0x50

Make probe and destruct a direct call in the disco and revalidate function,
but put them outside the lock. The whole discovery or revalidate won't
be interrupted by other events. And the DISCE_PROBE and DISCE_DESTRUCT
event are deleted as a result of the direct call.

Introduce a new list to destruct the sas_port and put the port delete after
the destruct. This makes sure the right order of destroying the sysfs
kobject and fix the warning above.

In sas_ex_revalidate_domain() have a loop to find all broadcasted
device, and sometimes we have a chance to find the same expander twice.
Because the sas_port will be deleted at the end of the whole revalidate
process, sas_port with the same name cannot be added before this.
Otherwise the sysfs will complain of creating duplicate filename. Since
the LLDD will send broadcast for every device change, we can only
process one expander's revalidation.

[mkp: kbuild test robot warning]

Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: use flush_workqueue to process disco events synchronously

Now we are processing sas event and discover event in different
workqueues.  It's safe to wait the discover event done in the sas event
work. Use flush_workqueue() to insure the disco and revalidate events
processed synchronously so that the whole discover and revalidate
process will not be interrupted by other events.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Use new workqueue to run sas event and disco event

Now all libsas works are queued to scsi host workqueue, include sas
event work post by LLDD and sas discovery work, and a sas hotplug flow
may be divided into several works, e.g libsas receive a
PORTE_BYTES_DMAED event, currently we process it as following steps:

sas_form_port  --- run in work in shost workq
sas_discover_domain  --- run in another work in shost workq
...
sas_probe_devices  --- run in new work in shost workq
We found during hot-add a device, libsas may need run several
works in same workqueue to add device in system, the process is
not atomic, it may interrupt by other sas event works, like
PHYE_LOSS_OF_SIGNAL.

This patch is preparation of execute libsas sas event in sync. We need
to use different workqueue to run sas event and disco event. Otherwise
the work will be blocked for waiting another chained work in the same
workqueue.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: make the event threshold configurable

Add a sysfs attr that LLDD can configure it for every host. We made an
example in hisi_sas. Other LLDDs using libsas can implement it if they
want.

Suggested-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Acked-by: John Garry <john.garry@huawei.com> #for hisi_sas part
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: shut down the PHY if events reached the threshold

If the PHY burst too many events, we will alloc a lot of events for the
worker. This may leads to memory exhaustion.

Dan Williams suggested to shut down the PHY if the events reached the
threshold, because in this case the PHY may have gone into some
erroneous state. Users can re-enable the PHY by sysfs if they want.

We cannot use the fixed memory pool because if we run out of events, the
shut down event and loss of signal event will lost too. The events still
need to be allocated and processed in this case.

Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Use dynamic alloced work to avoid sas event lost

Now libsas hotplug work is static, every sas event type has its own
static work, LLDD driver queues the hotplug work into shost->work_q.  If
LLDD driver burst posts lots hotplug events to libsas, the hotplug
events may pending in the workqueue like

shost->work_q
new work[PORTE_BYTES_DMAED] --> |[PHYE_LOSS_OF_SIGNAL][PORTE_BYTES_DMAED] -> processing
                                |<-------wait worker to process-------->|

In this case, a new PORTE_BYTES_DMAED event coming, libsas try to queue
it to shost->work_q, but this work is already pending, so it would be
lost. Finally, libsas delete the related sas port and sas devices, but
LLDD driver expect libsas add the sas port and devices(last sas event).

This patch use dynamic allocated work to avoid this issue.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mptfusion: use strlcpy() instead of strncpy()

gcc-8 reports

drivers/message/fusion/mptbase.c: In function 'mpt_display_event_info':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 100 equals destination size [-Wstringop-truncation]

We need to use strlcpy() to make sure the dest string is nul-terminated.

Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: remove redundant setting of variable c

A previous commit no longer stores the contents of c, so we now have a
situation where c is being updated but the value is never read. Clean up
the code by removing the now redundant setting of variable c.

Cleans up clang warning:
drivers/scsi/aacraid/aachba.c:943:3: warning: Value stored to 'c' is
never read

Fixes: f4e8708d3104 ("scsi: aacraid: Fix udev inquiry race condition")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libcxgbi: use GFP_ATOMIC in cxgbi_conn_alloc_pdu()

For mgmt cmds ->alloc_pdu() can be called from atomic context so use
GFP_ATOMIC instead of GFP_KERNEL.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: initialize sas_phy status according to response of DISCOVER

The status of SAS PHY is in sas_phy->enabled. There is an issue that the
status of a remote SAS PHY may be initialized incorrectly: if disable
remote SAS PHY through sysfs interface (such as echo 0 >
/sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we
will find the status of remote SAS PHY which is disabled before is
1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of
remote SAS PHY is disabled and the device attached is not found.

In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response
is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled
according to the value of NEGOTIATED LOGICAL LINK RATE field.

Signed-off-by: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: fix error when getting phy events

The intend purpose here was to goto out if smp_execute_task() returned
error. Obviously something got screwed up. We will never get these link
error statistics below:

~:/sys/class/sas_phy/phy-1:0:12 # cat invalid_dword_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat running_disparity_error_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat loss_of_dword_sync_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat phy_reset_problem_count
0

Obviously we should goto error handler if smp_execute_task() returns
non-zero.

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: chenqilin <chenqilin2@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: fix memory leak in sas_smp_get_phy_events()

We've got a memory leak with the following producer:

while true;
do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null;
done

The buffer req is allocated and not freed after we return. Fix it.

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: chenqilin <chenqilin2@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: Use vsnprintf extension %phN

Using this extension reduces the object size.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2i: Use zeroing allocator rather than allocator/memset

Use dma_zalloc_coherent instead of dma_alloc_coherent followed by
memset 0.

Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Use zeroing allocator rather than allocator/memset

Use vzalloc instead of vmalloc followed by memset 0.

Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Use zeroing allocator rather than allocator/memset

Use dma_zalloc_coherent and vzalloc instead of dma_alloc_coherent and
vmalloc respectively, followed by memset 0.

Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Use zeroing allocator rather than allocator/memset

Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset
0.

Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Fix driver oops with dead battery

The battery in my HP NetRAID-4M died of old age, and the aacraid driver
started oopsing with NULL pointer dereference on startup after that.

Fix it by reordering the init sequence to fill in function pointers
before ioremapping memory, or dev->a_ops.adapter_ioremap pointer will be
NULL.

Other subtypes of aacraid seem to have the order already correct.

This was the call trace:

 ? aac_probe_one+0x7a5/0xb30 [aacraid]
 pci_device_probe+0xc0/0x1a0
 driver_probe_device+0x1df/0x3b0
 __driver_attach+0xa9/0xe0
 ? driver_probe_device+0x3b0/0x3b0
 bus_for_each_dev+0x4c/0x90
 driver_attach+0x1d/0x40
 ? driver_probe_device+0x3b0/0x3b0
 bus_add_driver+0x1a7/0x2a0
 driver_register+0x6e/0x130
 __pci_register_driver+0x54/0x90
 ? 0xf81f4000
 aac_init+0x2b/0x1000 [aacraid]
 do_one_initcall+0x45/0x1e0
 ? kfree_skbmem+0x74/0xa0
 ? kfree+0x16d/0x240
 ? kvfree+0x45/0x50
 ? kvfree+0x45/0x50
 ? __vunmap+0x99/0x120
 ? do_init_module+0x1a/0x245
 do_init_module+0x83/0x245
 load_module+0x2764/0x34a0
 ? kernel_read_file+0x150/0x320
 SyS_finit_module+0x82/0xa0
 do_fast_syscall_32+0xba/0x340

Signed-off-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Update driver version to 10.00.00.04-k

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Serialize session free in qlt_free_session_done

Add free_pending flag to serialize queueing of
free_work element onto the work queue

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Serialize session deletion by using work_lock

for session deletion, replace sess_lock with work_lock.
Under certain case sess_lock is not feasiable to acquire.
The lock is needed temporarily to make sure a single
call to schedule of the work element.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove unused argument from qlt_schedule_sess_for_deletion()

Immeadiate flag is not used for scheduling session deletion.
Remove it to simplfy session deletion code path.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Prevent relogin trigger from sending too many commands

This patch adds check for pending work event before queueing
relogin work to prevent redundant work to be active at the
same time.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Prevent multiple active discovery commands per session

Add check to allow single discovery command per session to be sent

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add retry limit for fabric scan logic

Switch scan is assumed to succeed most of the time.
If the scan failed, then scan is limit 5 retries.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Delay loop id allocation at login

Delay loop id allocation to login time

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Increase verbosity of debug messages logged

Add verbose bit for debug messages to reduce excessive
log messages

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Allow relogin and session creation after reset

When any kind of reset is issued, current code was setting
state of LOGIN pending too early. This resulted into driver
not retrying relogin until pervious reloin completes.

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add ability to use GPNFT/GNNFT for RSCN handling

add ability to use gpnft/gnnft to handle RSCN.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Properly extract ADISC error codes

This patch fixes issue with extraction of ADISC error codes
for decoding the error returned

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix GPNFT/GNNFT error handling

retry gpnft/gnnft if error is encountered.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove session creation redundant code

Current code creates a session when a new port is
discovered, and a PLOGI/PRLI is received. There is
no need to create session when command has arrived.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Migrate switch registration commands away from mailbox interface

Migrate switch registration commands: RFTID, RFFID, RNNID and RSNN_NN
out of mailbox interface to reduce fabric scan bottle neck.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix login state machine freeze

Relogin stop moving forward due to improper check of scan_state flag.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Reduce trace noise for Async Events

Add NPIV id check to reduce multiple debug messages
of the same RSCN event.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Reduce the use of terminate exchange

reduce usage of terminate exchange when command encounter
resource bottle neck.  Remote initiator view it as command
drop.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add lock protection around host lookup

Host lookup via btree is currently protected by the hardware_lock.
Add hardware_lock when modifying btree to store host pointer.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add switch command to simplify fabric discovery

- add "async" gpn_ft, gnn_ft, gfpn_id, gnn_id switch commands.
- For 8G and newer adapters, use async commands when it comes to
fabric scan to reduce bottle neck.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Use known NPort ID for Management Server login

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix session cleanup for N2N

When connection type is N_Port to N_Port (point-to-point), there
is a possibilty where initiator will not send PLOGI request and
will directly send PRLI. In N2N connection the port has higher
port name sends the PLOGI but not allow to send PRLI if is a
target mode. Only initiator is allowed to send PRLI.

Current driver code deletes old session when it receives PLOGI
request. If we will not receive PLOGI request then we will not
delete old session and create new session. Add check for N2N
with PRLI receive only and trigger cleanup. For this case, the
cleanup requires individual cmd abort instead of using implicit
logout as a broad stroke flush.

Signed-off-by: Krishna Kant <krishna.kant@purestorage.com>
Signed-off-by: Alexei Potashnik <alexei@purestorage.com>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Tweak resource count dump

Fetch actual data from firmware instead of static data
at chip reset time.

Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Allow target mode to accept PRLI in dual mode

For Dual Mode, Initiator side of the driver finish login,
target side receive PRLI, but driver terminates PRLI.
This patch allows target side to go ahead and accept PRLI.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Don't call dma_free_coherent with IRQ disabled.

The logo ELS command allocates dma coherent memory for the
data payload and serialize the completions. When this command
times out, the timeout routine completes the thread waiting
for completion which in turn cleanup resources allocated for
this ELS command processing. Don't call generic sp->free
routine when this ELS command times out to avoid to double
freeing of the same resources.

Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add ability to send PRLO

Add ability to send Implicit PRLO to flush IOs
from FW back to driver.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add option for use reserve exch for ELS

Add option to tell FW to reserve 1/2 of emergency exchanges for ELS.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Use shadow register for ISP27XX

For ISP27XX, use shadow register to read FW provided REQQ's consumer
index. The shadow register is dma'ed by firmware.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Enable ATIO interrupt handshake for ISP27XX

Enable ATIO Q interrupt handshake for ISP27XX. This patch
coalesce ATIO's interrupts for Quad port ISP27XX adapter.
Interrupt coalesce allows performance to scale for this
specific case.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Move work element processing out of DPC thread

DPC thread can stall during switch scan due to slow switch response.
This will stall other work element that needs attention. Moving work
element processing and relogin logic out of DPC thread and into its
own work queue.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Replace GPDB with async ADISC command

Replace call to Get Port DataBase MB with PDO_FORCE_ADISC
flag with async ADISC command so driver can see ADISC command
has error or not.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix Firmware dump size for Extended login and Exchange Offload

This patch adjusts and reallocates fw_dump memory for target mode
to save for extended login and exchange offload buffers into
dump captured.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Chip reset uses wrong lock during IO flush.

As part of chip reset, all commands from all QPairs are
flushed. This patch fixes code to use Q Pair lock for flush
instead of using old hardware_lock.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add boundary checks for exchanges to be offloaded

Max boundary for exchange off load is 32k exchanges. If a system
is unable to allocate large memory buffer to support this feature,
then driver will reduce the number of exchanges down to a value
system can support.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Use chip reset to bring down laser on unload.

Current code uses Stop Firmware MB cmd to stop the chip before
driver unload.  This will leave the laser in its current state.
This give the illusion of this adapter is still alive.
For 8G & newer adapters, use chip reset to stop the chip and
bring down the laser.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Use IOCB path to submit Control VP MBX command

Use IOCB patch to submit Control VP MBX command to reduce
bottle-neck for mbx interface.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix NULL pointer access for fcport structure

when processing iocb in a timeout case, driver was trying to log messages
without verifying if the fcport structure could have valid data. This
results in a NULL pointer access.

Fixes: 726b85487067("qla2xxx: Add framework for async fabric discovery")
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: drop unneeded newline

hpsa_show_dev_msg prints other information and a newline after the
message string, so the message string does not need to include a newline
explicitly.  Done using Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Update driver version to 50877

Update driver Version to 50877

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Remove AAC_HIDE_DISK check in queue command

Earlier driver would scan throgh all supported buses and targets and add
devices that responded. It would add devices that were _hidden_ by the fw.
Driver would invalidate commands sent to _hidden_ devices via the
AAC_HIDE_DISK check.

Since the driver now adds only the devices that are supposed to be
exposed, this code can be removed.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Remove unused rescan variable

Remove unused rescan variable.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Skip schedule rescan in case of kdump

There is a chance of the driver to be stuck in kdump if drives start
acting up in kdump discovery process and the kernel decides to send eh
resets, which would prompt rescan to be scheduled.

Do not perform a rescan in kdump context, since we do not expect a hotplug
event during kdump and all the devices are going to go away anyway.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Fix hang while scanning in eh recovery

Add back the ability to scan for hotplug changes while eh was in progress.

Schedule a rescan for a later time in the eh recovery code and wait for
eh to complete in the rescan worker.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Reschedule host scan in case of failure

If the driver fails to retrieve information from the fw (could happen when
the fw is not fully in its senses), the driver does nothing and change is
not processed correctly by the driver

Schedule host rescan in case of failure. This is only for SAFW, since
the information retrieval failure will happen on SAFW devices.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Use hotplug handling function in place of scsi_scan_host

Driver uses scsi_scan_host to add new devices in the driver init path,
which adds all the fw exposed devices. The drivers resorts to queue
command checks to block out commands to _hidden_ devices.

Use the hotplug handler code to add new devices during driver init and
other areas, this is only for safw. For ARC scsi_scan_host will still
apply.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Block concurrent hotplug event handling

Currently driver will attempt to process hotplug events concurrently based
on the FW interrupt.

Protect safw update function with a scan mutex.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Merge adapter setup with resolve luns

The device hotplug events are processed only after retrieving the updated
lun information from the fw. Does not make sense to keep them separate.

Merge both the hotplug handling and safw adapter setup code into single
function.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Refactor resolve luns code and scsi functions

Resolve luns checks the if a sdev is already present in the os to figure
out if it needs to be removed. Internally the driver exposes HBA on bus
2 even though its bus 1 in the fw. Its mildly confusing.

Refactor out the sdev lookup into its function to check if sdev has been
added to the kernel or not. Add helper functions to add, remove and put
devices based on their fw bus and target number.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Added macros to help loop through known buses and targets

Added macros to loop through the MAX SUPPORTED Buses and Targets. This
will make the code a bit easier to read.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Process hba and container hot plug events in single function

The hotplug handler code is duplicated for hba handling and container
handling.

Merged function to handle hba and container hot plug events into the
resolve luns functions. Added a bunch of helper functions to check the
validity of a given target and to check if bus, target is container
device.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Merge func to get container information

Merge aac_get_containers to setup target function, so that information
about all the present devices can be retrieved in one shot.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Add helper function to set queue depth

Add helper function to set queue depth from information retrieved from
the bmic phy structure.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Save bmic phy information for each phy

Save the bmic information for each phy, so that it can processed in
target setup function.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Create helper functions to get lun info

Created inline function to retrieve lun info for each device from the
phy luns structure.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Move function around to match existing code

Move the function to get phy luns information to the top of function
to set target information

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Untangle targets setup from report phy luns

Remove function call to process targets from the report phy luns function
and make it a function in its own right. This will help understand the
flow of the code.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Add target setup helper function

Add helper function to setup targets devices and create the base for the
upcoming patches

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Refactor and rename to make mirror existing changes

Rename variables and functions to make bmic identify, report phy luns
to make them consistent across code internal existing code bases

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Change phy luns function to use common bmic function

Edit function that retrieves phy lun information to use common
bmic function

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Create bmic submission function from bmic identify

safw command submission is duplicated across many functions.

Move the safw submission code from bmic identify into its own function
for common use

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Move code to wait for IO completion to shutdown func

Ideally driver needs to wait for IO to be submitted or responded to before
shutdown.

Move code to wait for IO completion into shutdown path

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Refactor reset_host store function

Refactored the reset_host store function to make consistent across code
bases

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>