Linus Torvalds [Fri, 20 Aug 2021 19:11:33 +0000 (12:11 -0700)]
Merge tag 'iommu-fixes-v5.14-rc6' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix for a potential NULL-ptr dereference in IOMMU core code
- Two resource leak fixes
- Cache flush fix in the Intel VT-d driver
* tag 'iommu-fixes-v5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix incomplete cache flush in intel_pasid_tear_down_entry()
iommu/vt-d: Fix PASID reference leak
iommu: Check if group is NULL before remove device
iommu/dma: Fix leak in non-contiguous API
Linus Torvalds [Thu, 19 Aug 2021 22:32:58 +0000 (15:32 -0700)]
Merge tag 'soc-fixes-5.14-3' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Not much to see here. Half the fixes this time are for Qualcomm dts
files, fixing small mistakes on certain machines. The other fixes are:
- A 5.13 regression fix for freescale QE interrupt controller\
- A fix for TI OMAP gpt12 timer error handling
- A randconfig build regression fix for ixp4xx
- Another defconfig fix following the CONFIG_FB dependency rework"
* tag 'soc-fixes-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: fsl: qe: fix static checker warning
ARM: ixp4xx: fix building both pci drivers
ARM: configs: Update the nhk8815_defconfig
bus: ti-sysc: Fix error handling for sysc_check_active_timer()
soc: fsl: qe: convert QE interrupt controller to platform_device
arm64: dts: qcom: sdm845-oneplus: fix reserved-mem
arm64: dts: qcom: msm8994-angler: Disable cont_splash_mem
arm64: dts: qcom: sc7280: Fixup cpufreq domain info for cpu7
arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping
arm64: dts: qcom: msm8992-bullhead: Remove PSCI
arm64: dts: qcom: c630: fix correct powerdown pin for WSA881x
Linus Torvalds [Thu, 19 Aug 2021 19:33:43 +0000 (12:33 -0700)]
Merge tag 'net-5.14-rc7' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless and mac80211
trees.
Current release - regressions:
- tipc: call tipc_wait_for_connect only when dlen is not 0
- mac80211: fix locking in ieee80211_restart_work()
Current release - new code bugs:
- bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id()
- ethernet: ice: fix perout start time rounding
- wwan: iosm: prevent underflow in ipc_chnl_cfg_get()
Previous releases - regressions:
- bpf: clear zext_dst of dead insns
- sch_cake: fix srchost/dsthost hashing mode
- vrf: reset skb conntrack connection on VRF rcv
- net/rds: dma_map_sg is entitled to merge entries
Previous releases - always broken:
- ethernet: bnxt: fix Tx path locking and races, add Rx path
barriers"
* tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
net: dpaa2-switch: disable the control interface on error path
Revert "flow_offload: action should not be NULL when it is referenced"
iavf: Fix ping is lost after untrusted VF had tried to change MAC
i40e: Fix ATR queue selection
r8152: fix the maximum number of PLA bp for RTL8153C
r8152: fix writing USB_BP2_EN
mptcp: full fully established support after ADD_ADDR
mptcp: fix memory leak on address flush
net/rds: dma_map_sg is entitled to merge entries
net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port
net: asix: fix uninit value bugs
ovs: clear skb->tstamp in forwarding path
net: mdio-mux: Handle -EPROBE_DEFER correctly
net: mdio-mux: Don't ignore memory allocation errors
net: mdio-mux: Delete unnecessary devm_kfree
net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, or worse
sch_cake: fix srchost/dsthost hashing mode
ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path
net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
mac80211: fix locking in ieee80211_restart_work()
...
Linus Torvalds [Thu, 19 Aug 2021 19:19:58 +0000 (12:19 -0700)]
Merge tag 'platform-drivers-x86-v5.14-4' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Enable SW_TABLET_MODE support for the TP200s
- Enable WMI on two more Gigabyte motherboards
* tag 'platform-drivers-x86-v5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: gigabyte-wmi: add support for B450M S2H V2
platform/x86: gigabyte-wmi: add support for X570 GAMING X
platform/x86: asus-nb-wmi: Add tablet_mode_sw=lid-flip quirk for the TP200s
platform/x86: asus-nb-wmi: Allow configuring SW_TABLET_MODE method with a module option
Vladimir Oltean [Thu, 19 Aug 2021 14:17:55 +0000 (17:17 +0300)]
net: dpaa2-switch: disable the control interface on error path
Currently dpaa2_switch_takedown has a funny name and does not do the
opposite of dpaa2_switch_init, which makes probing fail when we need to
handle an -EPROBE_DEFER.
A sketch of what dpaa2_switch_init does:
dpsw_open
dpaa2_switch_detect_features
dpsw_reset
for (i = 0; i < ethsw->sw_attr.num_ifs; i++) {
dpsw_if_disable
dpsw_if_set_stp
dpsw_vlan_remove_if_untagged
dpsw_if_set_tci
dpsw_vlan_remove_if
}
dpsw_vlan_remove
alloc_ordered_workqueue
dpsw_fdb_remove
dpaa2_switch_ctrl_if_setup
When dpaa2_switch_takedown is called from the error path of
dpaa2_switch_probe(), the control interface, enabled by
dpaa2_switch_ctrl_if_setup from dpaa2_switch_init, remains enabled,
because dpaa2_switch_takedown does not call
dpaa2_switch_ctrl_if_teardown.
Since dpaa2_switch_probe might fail due to EPROBE_DEFER of a PHY, this
means that a second probe of the driver will happen with the control
interface directly enabled.
This will trigger a second error:
[ 93.273528] fsl_dpaa2_switch dpsw.0: dpsw_ctrl_if_set_pools() failed
[ 93.281966] fsl_dpaa2_switch dpsw.0: fsl_mc_driver_probe failed: -13
[ 93.288323] fsl_dpaa2_switch: probe of dpsw.0 failed with error -13
Which if we investigate the /dev/dpaa2_mc_console log, we find out is
caused by:
[E, ctrl_if_set_pools:2211, DPMNG] ctrl_if must be disabled
So make dpaa2_switch_takedown do the opposite of dpaa2_switch_init (in
reasonable limits, no reason to change STP state, re-add VLANs etc), and
rename it to something more conventional, like dpaa2_switch_teardown.
Fixes:
613c0a5810b7 ("staging: dpaa2-switch: enable the control interface")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210819141755.1931423-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Thu, 19 Aug 2021 10:58:42 +0000 (13:58 +0300)]
Revert "flow_offload: action should not be NULL when it is referenced"
This reverts commit
9ea3e52c5bc8bb4a084938dc1e3160643438927a.
Cited commit added a check to make sure 'action' is not NULL, but
'action' is already dereferenced before the check, when calling
flow_offload_has_one_action().
Therefore, the check does not make any sense and results in a smatch
warning:
include/net/flow_offload.h:322 flow_action_mixed_hw_stats_check() warn:
variable dereferenced before check 'action' (see line 319)
Fix by reverting this commit.
Cc: gushengxian <gushengxian@yulong.com>
Fixes:
9ea3e52c5bc8 ("flow_offload: action should not be NULL when it is referenced")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20210819105842.1315705-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 19 Aug 2021 16:56:42 +0000 (09:56 -0700)]
Merge branch 'intel-wired-lan-driver-updates-2021-08-18'
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-08-18
This series contains updates to i40e and iavf drivers.
Arkadiusz fixes Flow Director not using the correct queue due to calling
the wrong pick Tx function for i40e.
Sylwester resolves traffic loss for iavf when it attempts to change its
MAC address when it does not have permissions to do so.
====================
Link: https://lore.kernel.org/r/20210818174217.4138922-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sylwester Dziedziuch [Wed, 18 Aug 2021 17:42:17 +0000 (10:42 -0700)]
iavf: Fix ping is lost after untrusted VF had tried to change MAC
Make changes to MAC address dependent on the response of PF.
Disallow changes to HW MAC address and MAC filter from untrusted
VF, thanks to that ping is not lost if VF tries to change MAC.
Add a new field in iavf_mac_filter, to indicate whether there
was response from PF for given filter. Based on this field pass
or discard the filter.
If untrusted VF tried to change it's address, it's not changed.
Still filter was changed, because of that ping couldn't go through.
Fixes:
c5c922b3e09b ("iavf: fix MAC address setting for VFs when filter is rejected")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan G <Gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arkadiusz Kubalewski [Wed, 18 Aug 2021 17:42:16 +0000 (10:42 -0700)]
i40e: Fix ATR queue selection
Without this patch, ATR does not work. Receive/transmit uses queue
selection based on SW DCB hashing method.
If traffic classes are not configured for PF, then use
netdev_pick_tx function for selecting queue for packet transmission.
Instead of calling i40e_swdcb_skb_tx_hash, call netdev_pick_tx,
which ensures that packet is transmitted/received from CPU that is
running the application.
Reproduction steps:
1. Load i40e driver
2. Map each MSI interrupt of i40e port for each CPU
3. Disable ntuple, enable ATR i.e.:
ethtool -K $interface ntuple off
ethtool --set-priv-flags $interface flow-director-atr
4. Run application that is generating traffic and is bound to a
single CPU, i.e.:
taskset -c 9 netperf -H 1.1.1.1 -t TCP_RR -l 10
5. Observe behavior:
Application's traffic should be restricted to the CPU provided in
taskset.
Fixes:
89ec1f0886c1 ("i40e: Fix queue-to-TC mapping on Tx")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 19 Aug 2021 15:58:16 +0000 (08:58 -0700)]
Merge https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2021-08-19
We've added 3 non-merge commits during the last 3 day(s) which contain
a total of 3 files changed, 29 insertions(+), 6 deletions(-).
The main changes are:
1) Fix to clear zext_dst for dead instructions which was causing invalid program
rejections on JITs with bpf_jit_needs_zext such as s390x, from Ilya Leoshkevich.
2) Fix RCU splat in bpf_get_current_{ancestor_,}cgroup_id() helpers when they are
invoked from sleepable programs, from Yonghong Song.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests, bpf: Test that dead ldx_w insns are accepted
bpf: Clear zext_dst of dead insns
bpf: Add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id() helpers
====================
Link: https://lore.kernel.org/r/20210819144904.20069-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Thu, 19 Aug 2021 15:22:46 +0000 (17:22 +0200)]
Merge tag 'omap-for-v5.14/gpt12-fix-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/fixes
Fix for omap gpt12 timer error handling
Two of the recent fixes for ti-sysc driver had bad interaction for a
function return value that caused one of the fixes to not work so we
need to change the return value handling. Otherwise early beagleboard
variants still have a boot issue.
* tag 'omap-for-v5.14/gpt12-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix error handling for sysc_check_active_timer()
Link: https://lore.kernel.org/r/pull-1629354796-830948@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
David S. Miller [Thu, 19 Aug 2021 11:19:30 +0000 (12:19 +0100)]
Merge branch 'r8152-bp-settings'
Hayes Wang says:
====================
r8152: fix bp settings
Fix the wrong bp settings of the firmware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang [Thu, 19 Aug 2021 03:05:37 +0000 (11:05 +0800)]
r8152: fix the maximum number of PLA bp for RTL8153C
The maximum PLA bp number of RTL8153C is 16, not 8. That is, the
bp 0 ~ 15 are at 0xfc28 ~ 0xfc46, and the bp_en is at 0xfc48.
Fixes:
195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang [Thu, 19 Aug 2021 03:05:36 +0000 (11:05 +0800)]
r8152: fix writing USB_BP2_EN
The register of USB_BP2_EN is 16 bits, so we should use
ocp_write_word(), not ocp_write_byte().
Fixes:
9370f2d05a2a ("support request_firmware for RTL8153")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 19 Aug 2021 11:17:05 +0000 (12:17 +0100)]
Merge branch 'mptcp-fixes'
Mat Martineau says:
====================
mptcp: Bug fixes
Here are two bug fixes for the net tree:
Patch 1 fixes a memory leak that could be encountered when clearing the
list of advertised MPTCP addresses.
Patch 2 fixes a protocol issue early in an MPTCP connection, to ensure
both peers correctly understand that the full MPTCP connection handshake
has completed even when the server side quickly sends an ADD_ADDR
option.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Wed, 18 Aug 2021 23:42:37 +0000 (16:42 -0700)]
mptcp: full fully established support after ADD_ADDR
If directly after an MP_CAPABLE 3WHS, the client receives an ADD_ADDR
with HMAC from the server, it is enough to switch to a "fully
established" mode because it has received more MPTCP options.
It was then OK to enable the "fully_established" flag on the MPTCP
socket. Still, best to check if the ADD_ADDR looks valid by looking if
it contains an HMAC (no 'echo' bit). If an ADD_ADDR echo is received
while we are not in "fully established" mode, it is strange and then
we should not switch to this mode now.
But that is not enough. On one hand, the path-manager has be notified
the state has changed. On the other hand, the "fully_established" flag
on the subflow socket should be turned on as well not to re-send the
MP_CAPABLE 3rd ACK content with the next ACK.
Fixes:
84dfe3677a6f ("mptcp: send out dedicated ADD_ADDR packet")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 18 Aug 2021 23:42:36 +0000 (16:42 -0700)]
mptcp: fix memory leak on address flush
The endpoint cleanup path is prone to a memory leak, as reported
by syzkaller:
BUG: memory leak
unreferenced object 0xffff88810680ea00 (size 64):
comm "syz-executor.6", pid 6191, jiffies
4295756280 (age 24.138s)
hex dump (first 32 bytes):
58 75 7d 3c 80 88 ff ff 22 01 00 00 00 00 ad de Xu}<....".......
01 00 02 00 00 00 00 00 ac 1e 00 07 00 00 00 00 ................
backtrace:
[<
0000000072a9f72a>] kmalloc include/linux/slab.h:591 [inline]
[<
0000000072a9f72a>] mptcp_nl_cmd_add_addr+0x287/0x9f0 net/mptcp/pm_netlink.c:1170
[<
00000000f6e931bf>] genl_family_rcv_msg_doit.isra.0+0x225/0x340 net/netlink/genetlink.c:731
[<
00000000f1504a2c>] genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
[<
00000000f1504a2c>] genl_rcv_msg+0x341/0x5b0 net/netlink/genetlink.c:792
[<
0000000097e76f6a>] netlink_rcv_skb+0x148/0x430 net/netlink/af_netlink.c:2504
[<
00000000ceefa2b8>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:803
[<
000000008ff91aec>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<
000000008ff91aec>] netlink_unicast+0x537/0x750 net/netlink/af_netlink.c:1340
[<
0000000041682c35>] netlink_sendmsg+0x846/0xd80 net/netlink/af_netlink.c:1929
[<
00000000df3aa8e7>] sock_sendmsg_nosec net/socket.c:704 [inline]
[<
00000000df3aa8e7>] sock_sendmsg+0x14e/0x190 net/socket.c:724
[<
000000002154c54c>] ____sys_sendmsg+0x709/0x870 net/socket.c:2403
[<
000000001aab01d7>] ___sys_sendmsg+0xff/0x170 net/socket.c:2457
[<
00000000fa3b1446>] __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486
[<
00000000db2ee9c7>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<
00000000db2ee9c7>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
[<
000000005873517d>] entry_SYSCALL_64_after_hwframe+0x44/0xae
We should not require an allocation to cleanup stuff.
Rework the code a bit so that the additional RCU work is no more needed.
Fixes:
1729cf186d8a ("mptcp: create the listening socket for new port")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gerd Rausch [Tue, 17 Aug 2021 17:04:37 +0000 (10:04 -0700)]
net/rds: dma_map_sg is entitled to merge entries
Function "dma_map_sg" is entitled to merge adjacent entries
and return a value smaller than what was passed as "nents".
Subsequently "ib_map_mr_sg" needs to work with this value ("sg_dma_len")
rather than the original "nents" parameter ("sg_len").
This old RDS bug was exposed and reliably causes kernel panics
(using RDMA operations "rds-stress -D") on x86_64 starting with:
commit
c588072bba6b ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Simply put: Linux 5.11 and later.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Link: https://lore.kernel.org/r/60efc69f-1f35-529d-a7ef-da0549cad143@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 17 Aug 2021 16:04:25 +0000 (19:04 +0300)]
net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port
Currently we are unable to ping a bridge on top of a felix switch which
uses the ocelot-8021q tagger. The packets are dropped on the ingress of
the user port and the 'drop_local' counter increments (the counter which
denotes drops due to no valid destinations).
Dumping the PGID tables, it becomes clear that the PGID_SRC of the user
port is zero, so it has no valid destinations.
But looking at the code, the cpu_fwd_mask (the bit mask of DSA tag_8021q
ports) is clearly missing from the forwarding mask of ports that are
under a bridge. So this has always been broken.
Looking at the version history of the patch, in v7
https://patchwork.kernel.org/project/netdevbpf/patch/
20210125220333.1004365-12-olteanv@gmail.com/
the code looked like this:
/* Standalone ports forward only to DSA tag_8021q CPU ports */
unsigned long mask = cpu_fwd_mask;
(...)
} else if (ocelot->bridge_fwd_mask & BIT(port)) {
mask |= ocelot->bridge_fwd_mask & ~BIT(port);
while in v8 (the merged version)
https://patchwork.kernel.org/project/netdevbpf/patch/
20210129010009.3959398-12-olteanv@gmail.com/
it looked like this:
unsigned long mask;
(...)
} else if (ocelot->bridge_fwd_mask & BIT(port)) {
mask = ocelot->bridge_fwd_mask & ~BIT(port);
So the breakage was introduced between v7 and v8 of the patch.
Fixes:
e21268efbe26 ("net: dsa: felix: perform switch setup for tag_8021q")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210817160425.3702809-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 18 Aug 2021 19:06:42 +0000 (12:06 -0700)]
Merge tag 'for-5.14-rc6-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix for cross-rename, adding a missing check for directory
and subvolume, this could lead to a crash"
* tag 'for-5.14-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: prevent rename2 from exchanging a subvol with a directory from different parents
Linus Torvalds [Wed, 18 Aug 2021 19:00:27 +0000 (12:00 -0700)]
Merge tag 'sound-5.14-rc7' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Only a few regression fixes and trivial device quirks"
* tag 'sound-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/via: Apply runtime PM workaround for ASUS B23E
ALSA: hda: Fix hang during shutdown due to link reset
ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9510 laptop
ALSA: oxfw: fix functioal regression for silence in Apogee Duet FireWire
ALSA: hda - fix the 'Capture Switch' value change notifications
Linus Torvalds [Wed, 18 Aug 2021 18:55:50 +0000 (11:55 -0700)]
Merge tag 'cfi-v5.14-rc7' of git://git./linux/kernel/git/kees/linux
Pull clang cfi fix from Kees Cook:
- Use rcu_read_{un}lock_sched_notrace to avoid recursion (Elliot Berman)
* tag 'cfi-v5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
cfi: Use rcu_read_{un}lock_sched_notrace
Linus Torvalds [Thu, 5 Aug 2021 17:04:43 +0000 (10:04 -0700)]
pipe: avoid unnecessary EPOLLET wakeups under normal loads
I had forgotten just how sensitive hackbench is to extra pipe wakeups,
and commit
3a34b13a88ca ("pipe: make pipe writes always wake up
readers") ended up causing a quite noticeable regression on larger
machines.
Now, hackbench isn't necessarily a hugely meaningful benchmark, and it's
not clear that this matters in real life all that much, but as Mel
points out, it's used often enough when comparing kernels and so the
performance regression shows up like a sore thumb.
It's easy enough to fix at least for the common cases where pipes are
used purely for data transfer, and you never have any exciting poll
usage at all. So set a special 'poll_usage' flag when there is polling
activity, and make the ugly "EPOLLET has crazy legacy expectations"
semantics explicit to only that case.
I would love to limit it to just the broken EPOLLET case, but the pipe
code can't see the difference between epoll and regular select/poll, so
any non-read/write waiting will trigger the extra wakeup behavior. That
is sufficient for at least the hackbench case.
Apart from making the odd extra wakeup cases more explicitly about
EPOLLET, this also makes the extra wakeup be at the _end_ of the pipe
write, not at the first write chunk. That is actually much saner
semantics (as much as you can call any of the legacy edge-triggered
expectations for EPOLLET "sane") since it means that you know the wakeup
will happen once the write is done, rather than possibly in the middle
of one.
[ For stable people: I'm putting a "Fixes" tag on this, but I leave it
up to you to decide whether you actually want to backport it or not.
It likely has no impact outside of synthetic benchmarks - Linus ]
Link: https://lore.kernel.org/lkml/20210802024945.GA8372@xsang-OptiPlex-9020/
Fixes:
3a34b13a88ca ("pipe: make pipe writes always wake up readers")
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Sandeep Patil <sspatil@android.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Weißschuh [Wed, 18 Aug 2021 16:44:35 +0000 (18:44 +0200)]
platform/x86: gigabyte-wmi: add support for B450M S2H V2
Reported as working here:
https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-
901207693
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210818164435.99821-1-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Liu Yi L [Tue, 17 Aug 2021 12:43:21 +0000 (20:43 +0800)]
iommu/vt-d: Fix incomplete cache flush in intel_pasid_tear_down_entry()
This fixes improper iotlb invalidation in intel_pasid_tear_down_entry().
When a PASID was used as nested mode, released and reused, the following
error message will appear:
[ 180.187556] Unexpected page request in Privilege Mode
[ 180.187565] Unexpected page request in Privilege Mode
[ 180.279933] Unexpected page request in Privilege Mode
[ 180.279937] Unexpected page request in Privilege Mode
Per chapter 6.5.3.3 of VT-d spec 3.3, when tear down a pasid entry, the
software should use Domain selective IOTLB flush if the PGTT of the pasid
entry is SL only or Nested, while for the pasid entries whose PGTT is FL
only or PT using PASID-based IOTLB flush is enough.
Fixes:
2cd1311a26673 ("iommu/vt-d: Add set domain DOMAIN_ATTR_NESTING attr")
Signed-off-by: Kumar Sanjay K <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Tested-by: Yi Sun <yi.y.sun@intel.com>
Link: https://lore.kernel.org/r/20210817042425.1784279-1-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210817124321.1517985-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fenghua Yu [Tue, 17 Aug 2021 12:43:20 +0000 (20:43 +0800)]
iommu/vt-d: Fix PASID reference leak
A PASID reference is increased whenever a device is bound to an mm (and
its PASID) successfully (i.e. the device's sdev user count is increased).
But the reference is not dropped every time the device is unbound
successfully from the mm (i.e. the device's sdev user count is decreased).
The reference is dropped only once by calling intel_svm_free_pasid() when
there isn't any device bound to the mm. intel_svm_free_pasid() drops the
reference and only frees the PASID on zero reference.
Fix the issue by dropping the PASID reference and freeing the PASID when
no reference on successful unbinding the device by calling
intel_svm_free_pasid() .
Fixes:
4048377414162 ("iommu/vt-d: Use iommu_sva_alloc(free)_pasid() helpers")
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20210813181345.1870742-1-fenghua.yu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210817124321.1517985-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pavel Skripkin [Tue, 17 Aug 2021 16:37:23 +0000 (19:37 +0300)]
net: asix: fix uninit value bugs
Syzbot reported uninit-value in asix_mdio_read(). The problem was in
missing error handling. asix_read_cmd() should initialize passed stack
variable smsr, but it can fail in some cases. Then while condidition
checks possibly uninit smsr variable.
Since smsr is uninitialized stack variable, driver can misbehave,
because smsr will be random in case of asix_read_cmd() failure.
Fix it by adding error handling and just continue the loop instead of
checking uninit value.
Added helper function for checking Host_En bit, since wrong loop was used
in 4 functions and there is no need in copy-pasting code parts.
Cc: Robert Foss <robert.foss@collabora.com>
Fixes:
d9fe64e51114 ("net: asix: Add in_pm parameter")
Reported-by: syzbot+a631ec9e717fb0423053@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kaixi.fan [Wed, 18 Aug 2021 02:22:15 +0000 (10:22 +0800)]
ovs: clear skb->tstamp in forwarding path
fq qdisc requires tstamp to be cleared in the forwarding path. Now ovs
doesn't clear skb->tstamp. We encountered a problem with linux
version 5.4.56 and ovs version 2.14.1, and packets failed to
dequeue from qdisc when fq qdisc was attached to ovs port.
Fixes:
fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Signed-off-by: kaixi.fan <fankaixi.li@bytedance.com>
Signed-off-by: xiexiaohui <xiexiaohui.xxh@bytedance.com>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 18 Aug 2021 09:48:52 +0000 (10:48 +0100)]
Merge branch 'mdio-fixes'
Saravana Kannan says:
====================
Clean up and fix error handling in mdio_mux_init()
This patch series was started due to -EPROBE_DEFER not being handled
correctly in mdio_mux_init() and causing issues [1]. While at it, I also
did some more error handling fixes and clean ups. The -EPROBE_DEFER fix is
the last patch.
Ideally, in the last patch we'd treat any error similar to -EPROBE_DEFER
but I'm not sure if it'll break any board/platforms where some child
mdiobus never successfully registers. If we treated all errors similar to
-EPROBE_DEFER, then none of the child mdiobus will work and that might be a
regression. If people are sure this is not a real case, then I can fix up
the last patch to always fail the entire mdio-mux init if any of the child
mdiobus registration fails.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Saravana Kannan [Wed, 18 Aug 2021 03:38:03 +0000 (20:38 -0700)]
net: mdio-mux: Handle -EPROBE_DEFER correctly
When registering mdiobus children, if we get an -EPROBE_DEFER, we shouldn't
ignore it and continue registering the rest of the mdiobus children. This
would permanently prevent the deferring child mdiobus from working instead
of reattempting it in the future. So, if a child mdiobus needs to be
reattempted in the future, defer the entire mdio-mux initialization.
This fixes the issue where PHYs sitting under the mdio-mux aren't
initialized correctly if the PHY's interrupt controller is not yet ready
when the mdio-mux is being probed. Additional context in the link below.
Fixes:
0ca2997d1452 ("netdev/of/phy: Add MDIO bus multiplexer support.")
Link: https://lore.kernel.org/lkml/CAGETcx95kHrv8wA-O+-JtfH7H9biJEGJtijuPVN0V5dUKUAB3A@mail.gmail.com/#t
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saravana Kannan [Wed, 18 Aug 2021 03:38:02 +0000 (20:38 -0700)]
net: mdio-mux: Don't ignore memory allocation errors
If we are seeing memory allocation errors, don't try to continue
registering child mdiobus devices. It's unlikely they'll succeed.
Fixes:
342fa1964439 ("mdio: mux: make child bus walking more permissive and errors more verbose")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saravana Kannan [Wed, 18 Aug 2021 03:38:01 +0000 (20:38 -0700)]
net: mdio-mux: Delete unnecessary devm_kfree
The whole point of devm_* APIs is that you don't have to undo them if you
are returning an error that's going to get propagated out of a probe()
function. So delete unnecessary devm_kfree() call in the error return path.
Fixes:
b60161668199 ("mdio: mux: Correct mdio_mux_init error path issues")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 17 Aug 2021 14:52:45 +0000 (17:52 +0300)]
net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, or worse
It seems that of_find_compatible_node has a weird calling convention in
which it calls of_node_put() on the "from" node argument, instead of
leaving that up to the caller. This comes from the fact that
of_find_compatible_node with a non-NULL "from" argument it only supposed
to be used as the iterator function of for_each_compatible_node(). OF
iterator functions call of_node_get on the next OF node and of_node_put()
on the previous one.
When of_find_compatible_node calls of_node_put, it actually never
expects the refcount to drop to zero, because the call is done under the
atomic devtree_lock context, and when the refcount drops to zero it
triggers a kobject and a sysfs file deletion, which assume blocking
context.
So any driver call to of_find_compatible_node is probably buggy because
an unexpected of_node_put() takes place.
What should be done is to use the of_get_compatible_child() function.
Fixes:
5a8f09748ee7 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX")
Link: https://lore.kernel.org/netdev/20210814010139.kzryimmp4rizlznt@skbuf/
Suggested-by: Frank Rowand <frowand.list@gmail.com>
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Mon, 16 Aug 2021 11:59:17 +0000 (13:59 +0200)]
sch_cake: fix srchost/dsthost hashing mode
When adding support for using the skb->hash value as the flow hash in CAKE,
I accidentally introduced a logic error that broke the host-only isolation
modes of CAKE (srchost and dsthost keywords). Specifically, the flow_hash
variable should stay initialised to 0 in cake_hash() in pure host-based
hashing mode. Add a check for this before using the skb->hash value as
flow_hash.
Fixes:
b0c19ed6088a ("sch_cake: Take advantage of skb->hash where appropriate")
Reported-by: Pete Heist <pete@heistp.net>
Tested-by: Pete Heist <pete@heistp.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Weißschuh [Tue, 17 Aug 2021 15:46:28 +0000 (17:46 +0200)]
platform/x86: gigabyte-wmi: add support for X570 GAMING X
Reported as working here:
https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-
900263115
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210817154628.84992-1-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Wang Hai [Tue, 17 Aug 2021 20:37:36 +0000 (13:37 -0700)]
ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path
In ixgbe_xsk_pool_enable(), if ixgbe_xsk_wakeup() fails,
We should restore the previous state and clean up the
resources. Add the missing clear af_xdp_zc_qps and unmap dma
to fix this bug.
Fixes:
d49e286d354e ("ixgbe: add tracking of AF_XDP zero-copy state for each queue pair")
Fixes:
4a9b32f30f80 ("ixgbe: fix potential RX buffer starvation for AF_XDP")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20210817203736.3529939-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 17 Aug 2021 22:08:13 +0000 (15:08 -0700)]
Merge tag 'wireless-drivers-2021-08-17' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.14
First set of fixes for v5.14 and nothing major this time. New devices
for iwlwifi and one fix for a compiler warning.
iwlwifi
* support for new devices
mt76
* fix compiler warning about MT_CIPHER_NONE
* tag 'wireless-drivers-2021-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers:
mt76: fix enum type mismatch
iwlwifi: add new so-jf devices
iwlwifi: add new SoF with JF devices
iwlwifi: pnvm: accept multiple HW-type TLVs
====================
Link: https://lore.kernel.org/r/20210817171027.EC1E6C43460@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 17 Aug 2021 19:47:18 +0000 (09:47 -1000)]
Merge tag 'trace-v5.14-rc6' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Limit the shooting in the foot of tp_printk
The "tp_printk" option redirects the trace event output to printk at
boot up. This is useful when a machine crashes before boot where the
trace events can not be retrieved by the in kernel ring buffer. But it
can be "dangerous" because trace events can be located in high
frequency locations such as interrupts and the scheduler, where a
printk can slow it down that it live locks the machine (because by the
time the printk finishes, the next event is triggered). Thus tp_printk
must be used with care.
It was discovered that the filter logic to trace events does not apply
to the tp_printk events. This can cause a surprise and live lock when
the user expects it to be filtered to limit the amount of events
printed to the console when in fact it still prints everything"
* tag 'trace-v5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Apply trace filters on all output channels
Dinghao Liu [Mon, 16 Aug 2021 13:14:04 +0000 (21:14 +0800)]
net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
qlcnic_83xx_unlock_flash() is called on all paths after we call
qlcnic_83xx_lock_flash(), except for one error path on failure
of QLCRD32(), which may cause a deadlock. This bug is suggested
by a static analysis tool, please advise.
Fixes:
81d0aeb0a4fff ("qlcnic: flash template based firmware reset recovery")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20210816131405.24024-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg [Tue, 17 Aug 2021 10:12:22 +0000 (12:12 +0200)]
mac80211: fix locking in ieee80211_restart_work()
Ilan's change to move locking around accidentally lost the
wiphy_lock() during some porting, add it back.
Fixes:
45daaa131841 ("mac80211: Properly WARN on HW scan before restart")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20210817121210.47bdb177064f.Ib1ef79440cd27f318c028ddfc0c642406917f512@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jason Wang [Tue, 17 Aug 2021 08:06:59 +0000 (16:06 +0800)]
virtio-net: use NETIF_F_GRO_HW instead of NETIF_F_LRO
Commit
a02e8964eaf92 ("virtio-net: ethtool configurable LRO")
maps LRO to virtio guest offloading features and allows the
administrator to enable and disable those features via ethtool.
This leads to several issues:
- For a device that doesn't support control guest offloads, the "LRO"
can't be disabled triggering WARN in dev_disable_lro() when turning
off LRO or when enabling forwarding bridging etc.
- For a device that supports control guest offloads, the guest
offloads are disabled in cases of bridging, forwarding etc slowing
down the traffic.
Fix this by using NETIF_F_GRO_HW instead. Though the spec does not
guarantee packets to be re-segmented as the original ones,
we can add that to the spec, possibly with a flag for devices to
differentiate between GRO and LRO.
Further, we never advertised LRO historically before
a02e8964eaf92
("virtio-net: ethtool configurable LRO") and so bridged/forwarded
configs effectively always relied on virtio receive offloads behaving
like GRO - thus even if this breaks any configs it is at least not
a regression.
Fixes:
a02e8964eaf92 ("virtio-net: ethtool configurable LRO")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Ivan <ivan@prestigetransportation.com>
Tested-by: Ivan <ivan@prestigetransportation.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Tue, 17 Aug 2021 05:24:32 +0000 (07:24 +0200)]
ALSA: hda/via: Apply runtime PM workaround for ASUS B23E
ASUS B23E requires the same workaround like other machines with
VT1802, otherwise it looses the codec power on a few nodes and the
sound kept silence.
Fixes:
a0645daf1610 ("ALSA: HDA: Early Forbid of runtime PM")
Link: https://lore.kernel.org/r/ac2232f142efcd67fe6ac38897f704f7176bd200.camel@gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210817052432.14751-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Imre Deak [Mon, 16 Aug 2021 17:42:59 +0000 (20:42 +0300)]
ALSA: hda: Fix hang during shutdown due to link reset
During system shutdown codecs may be still active, and resetting the
controller->codec HW link in this state - based on the bug reporter's
tests - leads to the shutdown sequence to get stuck. This happens at
least on the reporter's KBL system with an ALC662 codec.
For now fix the issue by skipping the link reset step.
Fixes:
472e18f63c42 ("ALSA: hda: Release controller display power during shutdown/reboot")
References: https://bugzilla.kernel.org/show_bug.cgi?id=214045
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3618#note_1024665
Reported-and-tested-by: youling257@gmail.com
Cc: youling257@gmail.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20210816174259.2759103-1-imre.deak@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Tue, 17 Aug 2021 01:42:09 +0000 (15:42 -1000)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This contains a fix for a potential boot failure due to a missing
Kconfig dependency for people upgrading with the DRBG enabled"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: drbg - select SHA512
Lahav Schlesinger [Sun, 15 Aug 2021 12:00:02 +0000 (12:00 +0000)]
vrf: Reset skb conntrack connection on VRF rcv
To fix the "reverse-NAT" for replies.
When a packet is sent over a VRF, the POST_ROUTING hooks are called
twice: Once from the VRF interface, and once from the "actual"
interface the packet will be sent from:
1) First SNAT: l3mdev_l3_out() -> vrf_l3_out() -> .. -> vrf_output_direct()
This causes the POST_ROUTING hooks to run.
2) Second SNAT: 'ip_output()' calls POST_ROUTING hooks again.
Similarly for replies, first ip_rcv() calls PRE_ROUTING hooks, and
second vrf_l3_rcv() calls them again.
As an example, consider the following SNAT rule:
> iptables -t nat -A POSTROUTING -p udp -m udp --dport 53 -j SNAT --to-source 2.2.2.2 -o vrf_1
In this case sending over a VRF will create 2 conntrack entries.
The first is from the VRF interface, which performs the IP SNAT.
The second will run the SNAT, but since the "expected reply" will remain
the same, conntrack randomizes the source port of the packet:
e..g With a socket bound to 1.1.1.1:10000, sending to 3.3.3.3:53, the conntrack
rules are:
udp 17 29 src=2.2.2.2 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=61033 packets=0 bytes=0 mark=0 use=1
udp 17 29 src=1.1.1.1 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=10000 packets=0 bytes=0 mark=0 use=1
i.e. First SNAT IP from 1.1.1.1 --> 2.2.2.2, and second the src port is
SNAT-ed from 10000 --> 61033.
But when a reply is sent (3.3.3.3:53 -> 2.2.2.2:61033) only the later
conntrack entry is matched:
udp 17 29 src=2.2.2.2 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 src=3.3.3.3 dst=2.2.2.2 sport=53 dport=61033 packets=1 bytes=49 mark=0 use=1
udp 17 28 src=1.1.1.1 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=10000 packets=0 bytes=0 mark=0 use=1
And a "port 61033 unreachable" ICMP packet is sent back.
The issue is that when PRE_ROUTING hooks are called from vrf_l3_rcv(),
the skb already has a conntrack flow attached to it, which means
nf_conntrack_in() will not resolve the flow again.
This means only the dest port is "reverse-NATed" (61033 -> 10000) but
the dest IP remains 2.2.2.2, and since the socket is bound to 1.1.1.1 it's
not received.
This can be verified by logging the 4-tuple of the packet in '__udp4_lib_rcv()'.
The fix is then to reset the flow when skb is received on a VRF, to let
conntrack resolve the flow again (which now will hit the earlier flow).
To reproduce: (Without the fix "Got pkt_to_nat_port" will not be printed by
running 'bash ./repro'):
$ cat run_in_A1.py
import logging
logging.getLogger("scapy.runtime").setLevel(logging.ERROR)
from scapy.all import *
import argparse
def get_packet_to_send(udp_dst_port, msg_name):
return Ether(src='11:22:33:44:55:66', dst=iface_mac)/ \
IP(src='3.3.3.3', dst='2.2.2.2')/ \
UDP(sport=53, dport=udp_dst_port)/ \
Raw(f'{msg_name}\x0012345678901234567890')
parser = argparse.ArgumentParser()
parser.add_argument('-iface_mac', dest="iface_mac", type=str, required=True,
help="From run_in_A3.py")
parser.add_argument('-socket_port', dest="socket_port", type=str,
required=True, help="From run_in_A3.py")
parser.add_argument('-v1_mac', dest="v1_mac", type=str, required=True,
help="From script")
args, _ = parser.parse_known_args()
iface_mac = args.iface_mac
socket_port = int(args.socket_port)
v1_mac = args.v1_mac
print(f'Source port before NAT: {socket_port}')
while True:
pkts = sniff(iface='_v0', store=True, count=1, timeout=10)
if 0 == len(pkts):
print('Something failed, rerun the script :(', flush=True)
break
pkt = pkts[0]
if not pkt.haslayer('UDP'):
continue
pkt_sport = pkt.getlayer('UDP').sport
print(f'Source port after NAT: {pkt_sport}', flush=True)
pkt_to_send = get_packet_to_send(pkt_sport, 'pkt_to_nat_port')
sendp(pkt_to_send, '_v0', verbose=False) # Will not be received
pkt_to_send = get_packet_to_send(socket_port, 'pkt_to_socket_port')
sendp(pkt_to_send, '_v0', verbose=False)
break
$ cat run_in_A2.py
import socket
import netifaces
print(f"{netifaces.ifaddresses('e00000')[netifaces.AF_LINK][0]['addr']}",
flush=True)
s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE,
str('vrf_1' + '\0').encode('utf-8'))
s.connect(('3.3.3.3', 53))
print(f'{s. getsockname()[1]}', flush=True)
s.settimeout(5)
while True:
try:
# Periodically send in order to keep the conntrack entry alive.
s.send(b'a'*40)
resp = s.recvfrom(1024)
msg_name = resp[0].decode('utf-8').split('\0')[0]
print(f"Got {msg_name}", flush=True)
except Exception as e:
pass
$ cat repro.sh
ip netns del A1 2> /dev/null
ip netns del A2 2> /dev/null
ip netns add A1
ip netns add A2
ip -n A1 link add _v0 type veth peer name _v1 netns A2
ip -n A1 link set _v0 up
ip -n A2 link add e00000 type bond
ip -n A2 link add lo0 type dummy
ip -n A2 link add vrf_1 type vrf table 10001
ip -n A2 link set vrf_1 up
ip -n A2 link set e00000 master vrf_1
ip -n A2 addr add 1.1.1.1/24 dev e00000
ip -n A2 link set e00000 up
ip -n A2 link set _v1 master e00000
ip -n A2 link set _v1 up
ip -n A2 link set lo0 up
ip -n A2 addr add 2.2.2.2/32 dev lo0
ip -n A2 neigh add 1.1.1.10 lladdr 77:77:77:77:77:77 dev e00000
ip -n A2 route add 3.3.3.3/32 via 1.1.1.10 dev e00000 table 10001
ip netns exec A2 iptables -t nat -A POSTROUTING -p udp -m udp --dport 53 -j \
SNAT --to-source 2.2.2.2 -o vrf_1
sleep 5
ip netns exec A2 python3 run_in_A2.py > x &
XPID=$!
sleep 5
IFACE_MAC=`sed -n 1p x`
SOCKET_PORT=`sed -n 2p x`
V1_MAC=`ip -n A2 link show _v1 | sed -n 2p | awk '{print $2'}`
ip netns exec A1 python3 run_in_A1.py -iface_mac ${IFACE_MAC} -socket_port \
${SOCKET_PORT} -v1_mac ${SOCKET_PORT}
sleep 5
kill -9 $XPID
wait $XPID 2> /dev/null
ip netns del A1
ip netns del A2
tail x -n 2
rm x
set +x
Fixes:
73e20b761acf ("net: vrf: Add support for PREROUTING rules on vrf device")
Signed-off-by: Lahav Schlesinger <lschlesinger@drivenets.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210815120002.2787653-1-lschlesinger@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Mon, 16 Aug 2021 21:22:02 +0000 (23:22 +0200)]
Merge tag 'qcom-arm64-fixes-for-5.14' of git://git./linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 fixes for v5.14
This fixes three regressions across Angler and Bullhead, introduced by
advancements in the platform definition. It then corrects the powerdown
GPIOs for the speaker amps on C630 and lastly fixes a typo that assigned
CPU7 in SC7280 to the wrong CPUfreq domain.
* tag 'qcom-arm64-fixes-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sdm845-oneplus: fix reserved-mem
arm64: dts: qcom: msm8994-angler: Disable cont_splash_mem
arm64: dts: qcom: sc7280: Fixup cpufreq domain info for cpu7
arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping
arm64: dts: qcom: msm8992-bullhead: Remove PSCI
arm64: dts: qcom: c630: fix correct powerdown pin for WSA881x
Link: https://lore.kernel.org/r/20210816205030.576348-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 16 Aug 2021 20:41:59 +0000 (22:41 +0200)]
Merge tag 'soc-fsl-fix-v5.14' of git://git./linux/kernel/git/leo/linux into arm/fixes
NXP/FSL SoC driver fixes for v5.14
QE interrupt controller driver
- Convert it to platform_device driver to make it work with fw_devlink
- Fix static analysis issue
* tag 'soc-fsl-fix-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: qe: fix static checker warning
soc: fsl: qe: convert QE interrupt controller to platform_device
Link: https://lore.kernel.org/r/20210813222305.13663-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds [Mon, 16 Aug 2021 16:36:01 +0000 (06:36 -1000)]
Merge tag 'mtd/fixes-for-5.14-rc7' of git://git./linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"MTD core fixes:
- Fix lock hierarchy in deregister_mtd_blktrans
- Handle flashes without OTP gracefully
- Break circular locks in register_mtd_blktrans
MTD device fixes:
- mchp48l640:
- Fix memory leak on cmd
- Silence some uninitialized variable warnings
- blkdevs:
- Initialize rq.limits.discard_granularity
CFI fixes:
- Fix crash when erasing/writing AMD cards
Raw NAND fixes:
- Fix of_get_nand_secure_regions():
- Add a missing check
- Avoid an unwanted probe failure when a DT property is missing"
* tag 'mtd/fixes-for-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: Fix probe failure due to of_get_nand_secure_regions()
mtd: fix lock hierarchy in deregister_mtd_blktrans
mtd: devices: mchp48l640: Fix memory leak on cmd
mtd: cfi_cmdset_0002: fix crash when erasing/writing AMD cards
mtd: core: handle flashes without OTP gracefully
mtd: mchp48l640: silence some uninitialized variable warnings
mtd: break circular locks in register_mtd_blktrans
mtd: rawnand: Add a check in of_get_nand_secure_regions()
mtd: mtd_blkdevs: Initialize rq.limits.discard_granularity
Linus Torvalds [Mon, 16 Aug 2021 16:31:06 +0000 (06:31 -1000)]
Merge tag 'trace-v5.14-rc5-2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Fixes and clean ups to tracing:
- Fix header alignment when PREEMPT_RT is enabled for osnoise tracer
- Inject "stop" event to see where osnoise stopped the trace
- Define DYNAMIC_FTRACE_WITH_ARGS as some code had an #ifdef for it
- Fix erroneous message for bootconfig cmdline parameter
- Fix crash caused by not found variable in histograms"
* tag 'trace-v5.14-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing / histogram: Fix NULL pointer dereference on strcmp() on NULL event name
init: Suppress wrong warning for bootconfig cmdline parameter
tracing: define needed config DYNAMIC_FTRACE_WITH_ARGS
trace/osnoise: Print a stop tracing message
trace/timerlat: Add a header with PREEMPT_RT additional fields
trace/osnoise: Add a header with PREEMPT_RT additional fields
Linus Torvalds [Mon, 16 Aug 2021 16:23:26 +0000 (06:23 -1000)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Two nested virtualization fixes for AMD processors"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nSVM: always intercept VMLOAD/VMSAVE when nested (CVE-2021-3656)
KVM: nSVM: avoid picking up unsupported bits from L2 in int_ctl (CVE-2021-3653)
Linus Torvalds [Mon, 16 Aug 2021 16:16:25 +0000 (06:16 -1000)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Fixes in virtio, vhost, and vdpa drivers"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix queue type selection logic
vdpa/mlx5: Avoid destroying MR on empty iotlb
tools/virtio: fix build
virtio_ring: pull in spinlock header
vringh: pull in spinlock header
virtio-blk: Add validation for block size in config space
vringh: Use wiov->used to check for read/write desc order
virtio_vdpa: reject invalid vq indices
vdpa: Add documentation for vdpa_alloc_device() macro
vDPA/ifcvf: Fix return value check for vdpa_alloc_device()
vp_vdpa: Fix return value check for vdpa_alloc_device()
vdpa_sim: Fix return value check for vdpa_alloc_device()
vhost: Fix the calculation in vhost_overflow()
vhost-vdpa: Fix integer overflow in vhost_vdpa_process_iotlb_update()
virtio_pci: Support surprise removal of virtio pci device
virtio: Protect vqs list access
virtio: Keep vring_del_virtqueue() mirror of VQ create
virtio: Improve vq->broken access to avoid any compiler optimization
Pingfan Liu [Sat, 14 Aug 2021 03:45:38 +0000 (11:45 +0800)]
tracing: Apply trace filters on all output channels
The event filters are not applied on all of the output, which results in
the flood of printk when using tp_printk. Unfolding
event_trigger_unlock_commit_regs() into trace_event_buffer_commit(), so
the filters can be applied on every output.
Link: https://lkml.kernel.org/r/20210814034538.8428-1-kernelfans@gmail.com
Cc: stable@vger.kernel.org
Fixes:
0daa2302968c1 ("tracing: Add tp_printk cmdline to have tracepoints go to printk()")
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Maxim Levitsky [Mon, 19 Jul 2021 13:05:00 +0000 (16:05 +0300)]
KVM: nSVM: always intercept VMLOAD/VMSAVE when nested (CVE-2021-3656)
If L1 disables VMLOAD/VMSAVE intercepts, and doesn't enable
Virtual VMLOAD/VMSAVE (currently not supported for the nested hypervisor),
then VMLOAD/VMSAVE must operate on the L1 physical memory, which is only
possible by making L0 intercept these instructions.
Failure to do so allowed the nested guest to run VMLOAD/VMSAVE unintercepted,
and thus read/write portions of the host physical memory.
Fixes:
89c8a4984fc9 ("KVM: SVM: Enable Virtual VMLOAD VMSAVE feature")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Wed, 14 Jul 2021 22:56:24 +0000 (01:56 +0300)]
KVM: nSVM: avoid picking up unsupported bits from L2 in int_ctl (CVE-2021-3653)
* Invert the mask of bits that we pick from L2 in
nested_vmcb02_prepare_control
* Invert and explicitly use VIRQ related bits bitmask in svm_clear_vintr
This fixes a security issue that allowed a malicious L1 to run L2 with
AVIC enabled, which allowed the L2 to exploit the uninitialized and enabled
AVIC to read/write the host physical memory at some offsets.
Fixes:
3d6368ef580a ("KVM: SVM: Add VMRUN handler")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dan Carpenter [Mon, 16 Aug 2021 11:13:33 +0000 (14:13 +0300)]
net: iosm: Prevent underflow in ipc_chnl_cfg_get()
The bounds check on "index" doesn't catch negative values. Using
ARRAY_SIZE() directly is more readable and more robust because it prevents
negative values for "index". Fortunately we only pass valid values to
ipc_chnl_cfg_get() so this patch does not affect runtime.
Reported-by: Solomon Ucko <solly.ucko@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NeilBrown [Fri, 6 Aug 2021 04:26:24 +0000 (14:26 +1000)]
btrfs: prevent rename2 from exchanging a subvol with a directory from different parents
Cross-rename lacks a check when that would prevent exchanging a
directory and subvolume from different parent subvolume. This causes
data inconsistencies and is caught before commit by tree-checker,
turning the filesystem to read-only.
Calling the renameat2 with RENAME_EXCHANGE flags like
renameat2(AT_FDCWD, namesrc, AT_FDCWD, namedest, (1 << 1))
on two paths:
namesrc = dir1/subvol1/dir2
namedest = subvol2/subvol3
will cause key order problem with following write time tree-checker
report:
[1194842.307890] BTRFS critical (device loop1): corrupt leaf: root=5 block=
27574272 slot=10 ino=258, invalid previous key objectid, have 257 expect 258
[1194842.322221] BTRFS info (device loop1): leaf
27574272 gen 8 total ptrs 11 free space 15444 owner 5
[1194842.331562] BTRFS info (device loop1): refs 2 lock_owner 0 current 26561
[1194842.338772] item 0 key (256 1 0) itemoff 16123 itemsize 160
[1194842.338793] inode generation 3 size 16 mode 40755
[1194842.338801] item 1 key (256 12 256) itemoff 16111 itemsize 12
[1194842.338809] item 2 key (256 84
2248503653) itemoff 16077 itemsize 34
[1194842.338817] dir oid 258 type 2
[1194842.338823] item 3 key (256 84
2363071922) itemoff 16043 itemsize 34
[1194842.338830] dir oid 257 type 2
[1194842.338836] item 4 key (256 96 2) itemoff 16009 itemsize 34
[1194842.338843] item 5 key (256 96 3) itemoff 15975 itemsize 34
[1194842.338852] item 6 key (257 1 0) itemoff 15815 itemsize 160
[1194842.338863] inode generation 6 size 8 mode 40755
[1194842.338869] item 7 key (257 12 256) itemoff 15801 itemsize 14
[1194842.338876] item 8 key (257 84
2505409169) itemoff 15767 itemsize 34
[1194842.338883] dir oid 256 type 2
[1194842.338888] item 9 key (257 96 2) itemoff 15733 itemsize 34
[1194842.338895] item 10 key (258 12 256) itemoff 15719 itemsize 14
[1194842.339163] BTRFS error (device loop1): block=
27574272 write time tree block corruption detected
[1194842.339245] ------------[ cut here ]------------
[1194842.443422] WARNING: CPU: 6 PID: 26561 at fs/btrfs/disk-io.c:449 csum_one_extent_buffer+0xed/0x100 [btrfs]
[1194842.511863] CPU: 6 PID: 26561 Comm: kworker/u17:2 Not tainted 5.14.0-rc3-git+ #793
[1194842.511870] Hardware name: empty empty/S3993, BIOS PAQEX0-3 02/24/2008
[1194842.511876] Workqueue: btrfs-worker-high btrfs_work_helper [btrfs]
[1194842.511976] RIP: 0010:csum_one_extent_buffer+0xed/0x100 [btrfs]
[1194842.512068] RSP: 0018:
ffffa2c284d77da0 EFLAGS:
00010282
[1194842.512074] RAX:
0000000000000000 RBX:
0000000000001000 RCX:
ffff928867bd9978
[1194842.512078] RDX:
0000000000000000 RSI:
0000000000000027 RDI:
ffff928867bd9970
[1194842.512081] RBP:
ffff92876b958000 R08:
0000000000000001 R09:
00000000000c0003
[1194842.512085] R10:
0000000000000000 R11:
0000000000000001 R12:
0000000000000000
[1194842.512088] R13:
ffff92875f989f98 R14:
0000000000000000 R15:
0000000000000000
[1194842.512092] FS:
0000000000000000(0000) GS:
ffff928867a00000(0000) knlGS:
0000000000000000
[1194842.512095] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[1194842.512099] CR2:
000055f5384da1f0 CR3:
0000000102fe4000 CR4:
00000000000006e0
[1194842.512103] Call Trace:
[1194842.512128] ? run_one_async_free+0x10/0x10 [btrfs]
[1194842.631729] btree_csum_one_bio+0x1ac/0x1d0 [btrfs]
[1194842.631837] run_one_async_start+0x18/0x30 [btrfs]
[1194842.631938] btrfs_work_helper+0xd5/0x1d0 [btrfs]
[1194842.647482] process_one_work+0x262/0x5e0
[1194842.647520] worker_thread+0x4c/0x320
[1194842.655935] ? process_one_work+0x5e0/0x5e0
[1194842.655946] kthread+0x135/0x160
[1194842.655953] ? set_kthread_struct+0x40/0x40
[1194842.655965] ret_from_fork+0x1f/0x30
[1194842.672465] irq event stamp: 1729
[1194842.672469] hardirqs last enabled at (1735): [<
ffffffffbd1104f5>] console_trylock_spinning+0x185/0x1a0
[1194842.672477] hardirqs last disabled at (1740): [<
ffffffffbd1104cc>] console_trylock_spinning+0x15c/0x1a0
[1194842.672482] softirqs last enabled at (1666): [<
ffffffffbdc002e1>] __do_softirq+0x2e1/0x50a
[1194842.672491] softirqs last disabled at (1651): [<
ffffffffbd08aab7>] __irq_exit_rcu+0xa7/0xd0
The corrupted data will not be written, and filesystem can be unmounted
and mounted again (all changes since the last commit will be lost).
Add the missing check for new_ino so that all non-subvolumes must reside
under the same parent subvolume. There's an exception allowing to
exchange two subvolumes from any parents as the directory representing a
subvolume is only a logical link and does not have any other structures
related to the parent subvolume, unlike files, directories etc, that
are always in the inode namespace of the parent subvolume.
Fixes:
cdd1fedf8261 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: stable@vger.kernel.org # 4.7+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David S. Miller [Mon, 16 Aug 2021 10:31:41 +0000 (11:31 +0100)]
Merge branch 'bnxt_en-fixes'
Michael Chan says:
====================
bnxt_en: 2 bug fixes
The first one disables aRFS/NTUPLE on an older broken firmware version.
The second one adds missing memory barriers related to completion ring
handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 15 Aug 2021 20:15:37 +0000 (16:15 -0400)]
bnxt_en: Add missing DMA memory barriers
Each completion ring entry has a valid bit to indicate that the entry
contains a valid completion event. The driver's main poll loop
__bnxt_poll_work() has the proper dma_rmb() to make sure the valid
bit of the next entry has been checked before proceeding further.
But when we call bnxt_rx_pkt() to process the RX event, the RX
completion event consists of two completion entries and only the
first entry has been checked to be valid. We need the same barrier
after checking the next completion entry. Add missing dma_rmb()
barriers in bnxt_rx_pkt() and other similar locations.
Fixes:
67a95e2022c7 ("bnxt_en: Need memory barrier when processing the completion ring.")
Reported-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 15 Aug 2021 20:15:36 +0000 (16:15 -0400)]
bnxt_en: Disable aRFS if running on 212 firmware
212 firmware broke aRFS, so disable it. Traffic may stop after ntuple
filters are inserted and deleted by the 212 firmware.
Fixes:
ae10ae740ad2 ("bnxt_en: Add new hardware RFS mode.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shai Malin [Sun, 15 Aug 2021 11:06:39 +0000 (14:06 +0300)]
qed: Fix null-pointer dereference in qed_rdma_create_qp()
Fix a possible null-pointer dereference in qed_rdma_create_qp().
Changes from V2:
- Revert checkpatch fixes.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shai Malin [Sun, 15 Aug 2021 11:05:08 +0000 (14:05 +0300)]
qed: qed ll2 race condition fixes
Avoiding qed ll2 race condition and NULL pointer dereference as part
of the remove and recovery flows.
Changes form V1:
- Change (!p_rx->set_prod_addr).
- qed_ll2.c checkpatch fixes.
Change from V2:
- Revert "qed_ll2.c checkpatch fixes".
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 15 Aug 2021 07:13:36 +0000 (03:13 -0400)]
tipc: call tipc_wait_for_connect only when dlen is not 0
__tipc_sendmsg() is called to send SYN packet by either tipc_sendmsg()
or tipc_connect(). The difference is in tipc_connect(), it will call
tipc_wait_for_connect() after __tipc_sendmsg() to wait until connecting
is done. So there's no need to wait in __tipc_sendmsg() for this case.
This patch is to fix it by calling tipc_wait_for_connect() only when dlen
is not 0 in __tipc_sendmsg(), which means it's called by tipc_connect().
Note this also fixes the failure in tipcutils/test/ptts/:
# ./tipcTS &
# ./tipcTC 9
(hang)
Fixes:
36239dab6da7 ("tipc: fix implicit-connect for SYN+")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Shevchenko [Fri, 13 Aug 2021 17:33:27 +0000 (20:33 +0300)]
ptp_pch: Restore dependency on PCI
During the swap dependency on PCH_GBE to selection PTP_1588_CLOCK_PCH
incidentally dropped the implicit dependency on the PCI. Restore it.
Fixes:
18d359ceb044 ("pch_gbe, ptp_pch: Fix the dependency direction between these drivers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Skripkin [Fri, 13 Aug 2021 15:14:33 +0000 (18:14 +0300)]
net: 6pack: fix slab-out-of-bounds in decode_data
Syzbot reported slab-out-of bounds write in decode_data().
The problem was in missing validation checks.
Syzbot's reproducer generated malicious input, which caused
decode_data() to be called a lot in sixpack_decode(). Since
rx_count_cooked is only 400 bytes and noone reported before,
that 400 bytes is not enough, let's just check if input is malicious
and complain about buffer overrun.
Fail log:
==================================================================
BUG: KASAN: slab-out-of-bounds in drivers/net/hamradio/6pack.c:843
Write of size 1 at addr
ffff888087c5544e by task kworker/u4:0/7
CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.6.0-rc3-syzkaller #0
...
Workqueue: events_unbound flush_to_ldisc
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:641
__asan_report_store1_noabort+0x17/0x20 mm/kasan/generic_report.c:137
decode_data.part.0+0x23b/0x270 drivers/net/hamradio/6pack.c:843
decode_data drivers/net/hamradio/6pack.c:965 [inline]
sixpack_decode drivers/net/hamradio/6pack.c:968 [inline]
Reported-and-tested-by: syzbot+fc8cd9a673d4577fb2e4@syzkaller.appspotmail.com
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 15 Aug 2021 23:40:53 +0000 (13:40 -1000)]
Linux 5.14-rc6
Linus Torvalds [Sun, 15 Aug 2021 16:57:43 +0000 (06:57 -1000)]
Merge tag 'powerpc-5.14-5' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes coming out of nap on 32-bit Book3s (eg. powerbooks).
- Fix critical and debug interrupts on BookE, seen as crashes when
using ptrace.
- Fix an oops when running an SMP kernel on a UP system.
- Update pseries LPAR security flavor after partition migration.
- Fix an oops when using kprobes on BookE.
- Fix oops on 32-bit pmac by not calling do_IRQ() from
timer_interrupt().
- Fix softlockups on CPU hotplug into a CPU-less node with xive (P9).
Thanks to Cédric Le Goater, Christophe Leroy, Finn Thain, Geetika
Moolchandani, Laurent Dufour, Laurent Vivier, Nicholas Piggin, Pu Lehui,
Radu Rendec, Srikar Dronamraju, and Stan Johnson.
* tag 'powerpc-5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xive: Do not skip CPU-less nodes when creating the IPIs
powerpc/interrupt: Do not call single_step_exception() from other exceptions
powerpc/interrupt: Fix OOPS by not calling do_IRQ() from timer_interrupt()
powerpc/kprobes: Fix kprobe Oops happens in booke
powerpc/pseries: Fix update of LPAR security flavor after LPM
powerpc/smp: Fix OOPS in topology_init()
powerpc/32: Fix critical and debug interrupts on BOOKE
powerpc/32s: Fix napping restore in data storage interrupt (DSI)
Linus Torvalds [Sun, 15 Aug 2021 16:49:40 +0000 (06:49 -1000)]
Merge tag 'irq-urgent-2021-08-15' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for PCI/MSI and x86 interrupt startup:
- Mask all MSI-X entries when enabling MSI-X otherwise stale unmasked
entries stay around e.g. when a crashkernel is booted.
- Enforce masking of a MSI-X table entry when updating it, which
mandatory according to speification
- Ensure that writes to MSI[-X} tables are flushed.
- Prevent invalid bits being set in the MSI mask register
- Properly serialize modifications to the mask cache and the mask
register for multi-MSI.
- Cure the violation of the affinity setting rules on X86 during
interrupt startup which can cause lost and stale interrupts. Move
the initial affinity setting ahead of actualy enabling the
interrupt.
- Ensure that MSI interrupts are completely torn down before freeing
them in the error handling case.
- Prevent an array out of bounds access in the irq timings code"
* tag 'irq-urgent-2021-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
driver core: Add missing kernel doc for device::msi_lock
genirq/msi: Ensure deactivation on teardown
genirq/timings: Prevent potential array overflow in __irq_timings_store()
x86/msi: Force affinity setup before startup
x86/ioapic: Force affinity setup before startup
genirq: Provide IRQCHIP_AFFINITY_PRE_STARTUP
PCI/MSI: Protect msi_desc::masked for multi-MSI
PCI/MSI: Use msi_mask_irq() in pci_msi_shutdown()
PCI/MSI: Correct misleading comments
PCI/MSI: Do not set invalid bits in MSI mask
PCI/MSI: Enforce MSI[X] entry updates to be visible
PCI/MSI: Enforce that MSI-X table entry is masked for update
PCI/MSI: Mask all unused MSI-X entries
PCI/MSI: Enable and mask MSI-X early
Linus Torvalds [Sun, 15 Aug 2021 16:46:04 +0000 (06:46 -1000)]
Merge tag 'locking_urgent_for_v5.14_rc6' of git://git./linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Fix a CONFIG symbol's spelling
* tag 'locking_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Use the correct rtmutex debugging config option
Linus Torvalds [Sun, 15 Aug 2021 16:38:26 +0000 (06:38 -1000)]
Merge tag 'efi_urgent_for_v5.14_rc6' of git://git./linux/kernel/git/tip/tip
Pull EFI fixes from Borislav Petkov:
"A batch of fixes for the arm64 stub image loader:
- fix a logic bug that can make the random page allocator fail
spuriously
- force reallocation of the Image when it overlaps with firmware
reserved memory regions
- fix an oversight that defeated on optimization introduced earlier
where images loaded at a suitable offset are never moved if booting
without randomization
- complain about images that were not loaded at the right offset by
the firmware image loader"
* tag 'efi_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: arm64: Double check image alignment at entry
efi/libstub: arm64: Warn when efi_random_alloc() fails
efi/libstub: arm64: Relax 2M alignment again for relocatable kernels
efi/libstub: arm64: Force Image reallocation if BSS was not reserved
arm64: efi: kaslr: Fix occasional random alloc (and boot) failure
Linus Torvalds [Sun, 15 Aug 2021 16:30:24 +0000 (06:30 -1000)]
Merge tag 'x86_urgent_for_v5.14_rc6' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"Two fixes:
- An objdump checker fix to ignore parenthesized strings in the
objdump version
- Fix resctrl default monitoring groups reporting when new subgroups
get created"
* tag 'x86_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix default monitoring groups reporting
x86/tools: Fix objdump version check again
Linus Torvalds [Sun, 15 Aug 2021 16:21:30 +0000 (06:21 -1000)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Plug race between enabling MTE and creating vcpus
- Fix off-by-one bug when checking whether an address range is RAM
x86:
- Fixes for the new MMU, especially a memory leak on hosts with <39
physical address bits
- Remove bogus EFER.NX checks on 32-bit non-PAE hosts
- WAITPKG fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Protect marking SPs unsync when using TDP MMU with spinlock
KVM: x86/mmu: Don't step down in the TDP iterator when zapping all SPTEs
KVM: x86/mmu: Don't leak non-leaf SPTEs when zapping all SPTEs
KVM: nVMX: Use vmx_need_pf_intercept() when deciding if L0 wants a #PF
kvm: vmx: Sync all matching EPTPs when injecting nested EPT fault
KVM: x86: remove dead initialization
KVM: x86: Allow guest to set EFER.NX=1 on non-PAE 32-bit kernels
KVM: VMX: Use current VMCS to query WAITPKG support for MSR emulation
KVM: arm64: Fix race when enabling KVM_ARM_CAP_MTE
KVM: arm64: Fix off-by-one in range_is_memory
Kristin Paget [Sat, 14 Aug 2021 22:46:05 +0000 (15:46 -0700)]
ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9510 laptop
The 2021-model XPS 15 appears to use the same 4-speakers-on-ALC289 audio
setup as the Precision models, so requires the same quirk to enable woofer
output. Tested on my own 9510.
Signed-off-by: Kristin Paget <kristin@tombom.co.uk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/e1fc95c5-c10a-1f98-a5c2-dd6e336157e1@tombom.co.uk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Sun, 15 Aug 2021 05:51:58 +0000 (19:51 -1000)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three minor fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Fix incorrectly assigned error return and check
scsi: storvsc: Log TEST_UNIT_READY errors as warnings
scsi: lpfc: Move initialization of phba->poll_list earlier to avoid crash
Linus Torvalds [Sun, 15 Aug 2021 05:46:39 +0000 (19:46 -1000)]
Merge tag 'libnvdimm-fixes-5.14-rc6' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A couple of fixes for long standing bugs, a warning fixup, and some
miscellaneous dax cleanups.
The bugs were recently found due to new platforms looking to use the
ACPI NFIT "virtual" device definition, and new error injection
capabilities to trigger error responses to label area requests. Ira's
cleanups have been long pending, I neglected to send them earlier, and
see no harm in including them now. This has all appeared in -next with
no reported issues.
Summary:
- Fix support for NFIT "virtual" ranges (BIOS-defined memory disks)
- Fix recovery from failed label storage areas on NVDIMM devices
- Miscellaneous cleanups from Ira's investigation of
dax_direct_access paths preparing for stray-write protection"
* tag 'libnvdimm-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
tools/testing/nvdimm: Fix missing 'fallthrough' warning
libnvdimm/region: Fix label activation vs errors
ACPI: NFIT: Fix support for virtual SPA ranges
dax: Ensure errno is returned from dax_direct_access
fs/dax: Clarify nr_pages to dax_direct_access()
fs/fuse: Remove unneeded kaddr parameter
Linus Torvalds [Sun, 15 Aug 2021 05:22:33 +0000 (19:22 -1000)]
Merge tag 'usb-5.14-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB fix from Greg KH:
"A single revert of a commit that caused problems in 5.14-rc5 for
5.14-rc6. It has been in linux-next almost all week, and has resolved
the issues that were reported on lots of different systems that were
not the platform that the change was originally tested on (gotta love
SoC cores used in multiple devices from multiple vendors...)"
* tag 'usb-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "usb: dwc3: gadget: Use list_replace_init() before traversing lists"
Linus Torvalds [Sun, 15 Aug 2021 05:16:30 +0000 (19:16 -1000)]
Merge tag 'staging-5.14-rc6' of git://git./linux/kernel/git/gregkh/staging
Pull IIO driver fixes from Greg KH:
"Here are some small IIO driver fixes for reported problems for
5.14-rc6 (no staging driver fixes at the moment).
All of them resolve reported issues and have been in linux-next all
week with no reported problems. Full details are in the shortlog"
* tag 'staging-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: Fix incorrect exit of for-loop
iio: humidity: hdc100x: Add margin to the conversion time
dt-bindings: iio: st: Remove wrong items length check
iio: accel: fxls8962af: fix i2c dependency
iio: adis: set GPIO reset pin direction
iio: adc: ti-ads7950: Ensure CS is deasserted after reading channels
iio: accel: fxls8962af: fix potential use of uninitialized symbol
Linus Torvalds [Sun, 15 Aug 2021 04:59:53 +0000 (18:59 -1000)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"One driver bugfix, a documentation bugfix, and an "uninitialized data"
leak fix for the core"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Documentation: i2c: add i2c-sysfs into index
i2c: dev: zero out array used for i2c reads from userspace
i2c: iproc: fix race between client unreg and tasklet
Linus Torvalds [Sat, 14 Aug 2021 16:31:22 +0000 (06:31 -1000)]
Merge tag 'for-linus-5.14-rc6-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A small cleanup patch and a fix of a rare race in the Xen evtchn
driver"
* tag 'for-linus-5.14-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: Fix race in set_evtchn_to_irq
xen/events: remove redundant initialization of variable irq
Linus Torvalds [Sat, 14 Aug 2021 16:28:19 +0000 (06:28 -1000)]
Merge tag 'riscv-for-linus-5.14-rc6' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- avoid passing -mno-relax to compilers that don't support it
- a comment fix
* tag 'riscv-for-linus-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix comment regarding kernel mapping overlapping with IS_ERR_VALUE
riscv: kexec: do not add '-mno-relax' flag if compiler doesn't support it
Linus Torvalds [Sat, 14 Aug 2021 16:22:42 +0000 (06:22 -1000)]
Merge tag 'configfs-5.14' of git://git.infradead.org/users/hch/configfs
Pull configfs fix from Christoph Hellwig:
- fix to revert to the historic write behavior (Bart Van Assche)
* tag 'configfs-5.14' of git://git.infradead.org/users/hch/configfs:
configfs: restore the kernel v5.13 text attribute write behavior
Linus Torvalds [Sat, 14 Aug 2021 01:05:23 +0000 (15:05 -1000)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"7 patches.
Subsystems affected by this patch series: mm (kasan, mm/slub,
mm/madvise, and memcg), and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib: use PFN_PHYS() in devmem_is_allowed()
mm/memcg: fix incorrect flushing of lruvec data in obj_stock
mm/madvise: report SIGBUS as -EFAULT for MADV_POPULATE_(READ|WRITE)
mm: slub: fix slub_debug disabling for list of slabs
slub: fix kmalloc_pagealloc_invalid_free unit test
kasan, slub: reset tag when printing address
kasan, kmemleak: reset tags when scanning block
Linus Torvalds [Sat, 14 Aug 2021 00:44:32 +0000 (14:44 -1000)]
Merge tag '5.14-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four CIFS/SMB3 Fixes, all for stable, two relating to deferred close,
and one for the 'modefromsid' mount option (when 'idsfromsid' not
specified)"
* tag '5.14-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Call close synchronously during unlink/rename/lease break.
cifs: Handle race conditions during rename
cifs: use the correct max-length for dentry_path_raw()
cifs: create sd context must be a multiple of 8
Linus Torvalds [Sat, 14 Aug 2021 00:32:38 +0000 (14:32 -1000)]
Merge tag 'linux-kselftest-fixes-5.14-rc6' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"A single patch to sgx test to fix Q1 and Q2 calculation"
* tag 'linux-kselftest-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/sgx: Fix Q1 and Q2 calculation in sigstruct.c
Maciej Machnikowski [Fri, 13 Aug 2021 16:50:18 +0000 (09:50 -0700)]
ice: Fix perout start time rounding
Internal tests found out that the latest code doesn't bring up 1PPS out
as expected. As a result of incorrect define used to round the time up
the time was round down to the past second boundary.
Fix define used for rounding to properly round up to the next Top of
second in ice_ptp_cfg_clkout to fix it.
Fixes:
172db5f91d5f ("ice: add support for auxiliary input/output pins")
Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20210813165018.2196013-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Liang Wang [Fri, 13 Aug 2021 23:54:45 +0000 (16:54 -0700)]
lib: use PFN_PHYS() in devmem_is_allowed()
The physical address may exceed 32 bits on 32-bit systems with more than
32 bits of physcial address. Use PFN_PHYS() in devmem_is_allowed(), or
the physical address may overflow and be truncated.
We found this bug when mapping a high addresses through devmem tool,
when CONFIG_STRICT_DEVMEM is enabled on the ARM with ARM_LPAE and devmem
is used to map a high address that is not in the iomem address range, an
unexpected error indicating no permission is returned.
This bug was initially introduced from v2.6.37, and the function was
moved to lib in v5.11.
Link: https://lkml.kernel.org/r/20210731025057.78825-1-wangliang101@huawei.com
Fixes:
087aaffcdf9c ("ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via /dev/mem")
Fixes:
527701eda5f1 ("lib: Add a generic version of devmem_is_allowed()")
Signed-off-by: Liang Wang <wangliang101@huawei.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Liang Wang <wangliang101@huawei.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org> [2.6.37+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Waiman Long [Fri, 13 Aug 2021 23:54:41 +0000 (16:54 -0700)]
mm/memcg: fix incorrect flushing of lruvec data in obj_stock
When mod_objcg_state() is called with a pgdat that is different from
that in the obj_stock, the old lruvec data cached in obj_stock are
flushed out. Unfortunately, they were flushed to the new pgdat and so
the data go to the wrong node. This will screw up the slab data
reported in /sys/devices/system/node/node*/meminfo.
Fix that by flushing the data to the cached pgdat instead.
Link: https://lkml.kernel.org/r/20210802143834.30578-1-longman@redhat.com
Fixes:
68ac5b3c8db2 ("mm/memcg: cache vmstat data in percpu memcg_stock_pcp")
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Hildenbrand [Fri, 13 Aug 2021 23:54:37 +0000 (16:54 -0700)]
mm/madvise: report SIGBUS as -EFAULT for MADV_POPULATE_(READ|WRITE)
Doing some extended tests and polishing the man page update for
MADV_POPULATE_(READ|WRITE), I realized that we end up converting also
SIGBUS (via -EFAULT) to -EINVAL, making it look like yet another
madvise() user error.
We want to report only problematic mappings and permission problems that
the user could have know as -EINVAL.
Let's not convert -EFAULT arising due to SIGBUS (or SIGSEGV) to -EINVAL,
but instead indicate -EFAULT to user space. While we could also convert
it to -ENOMEM, using -EFAULT looks more helpful when user space might
want to troubleshoot what's going wrong: MADV_POPULATE_(READ|WRITE) is
not part of an final Linux release and we can still adjust the behavior.
Link: https://lkml.kernel.org/r/20210726154932.102880-1-david@redhat.com
Fixes:
4ca9b3859dac ("mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Fri, 13 Aug 2021 23:54:34 +0000 (16:54 -0700)]
mm: slub: fix slub_debug disabling for list of slabs
Vijayanand Jitta reports:
Consider the scenario where CONFIG_SLUB_DEBUG_ON is set and we would
want to disable slub_debug for few slabs. Using boot parameter with
slub_debug=-,slab_name syntax doesn't work as expected i.e; only
disabling debugging for the specified list of slabs. Instead it
disables debugging for all slabs, which is wrong.
This patch fixes it by delaying the moment when the global slub_debug
flags variable is updated. In case a "slub_debug=-,slab_name" has been
passed, the global flags remain as initialized (depending on
CONFIG_SLUB_DEBUG_ON enabled or disabled) and are not simply reset to 0.
Link: https://lkml.kernel.org/r/8a3d992a-473a-467b-28a0-4ad2ff60ab82@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Vijayanand Jitta <vjitta@codeaurora.org>
Reviewed-by: Vijayanand Jitta <vjitta@codeaurora.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shakeel Butt [Fri, 13 Aug 2021 23:54:31 +0000 (16:54 -0700)]
slub: fix kmalloc_pagealloc_invalid_free unit test
The unit test kmalloc_pagealloc_invalid_free makes sure that for the
higher order slub allocation which goes to page allocator, the free is
called with the correct address i.e. the virtual address of the head
page.
Commit
f227f0faf63b ("slub: fix unreclaimable slab stat for bulk free")
unified the free code paths for page allocator based slub allocations
but instead of using the address passed by the caller, it extracted the
address from the page. Thus making the unit test
kmalloc_pagealloc_invalid_free moot. So, fix this by using the address
passed by the caller.
Should we fix this? I think yes because dev expect kasan to catch these
type of programming bugs.
Link: https://lkml.kernel.org/r/20210802180819.1110165-1-shakeelb@google.com
Fixes:
f227f0faf63b ("slub: fix unreclaimable slab stat for bulk free")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kuan-Ying Lee [Fri, 13 Aug 2021 23:54:27 +0000 (16:54 -0700)]
kasan, slub: reset tag when printing address
The address still includes the tags when it is printed. With hardware
tag-based kasan enabled, we will get a false positive KASAN issue when
we access metadata.
Reset the tag before we access the metadata.
Link: https://lkml.kernel.org/r/20210804090957.12393-3-Kuan-Ying.Lee@mediatek.com
Fixes:
aa1ef4d7b3f6 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kuan-Ying Lee [Fri, 13 Aug 2021 23:54:24 +0000 (16:54 -0700)]
kasan, kmemleak: reset tags when scanning block
Patch series "kasan, slub: reset tag when printing address", v3.
With hardware tag-based kasan enabled, we reset the tag when we access
metadata to avoid from false alarm.
This patch (of 2):
Kmemleak needs to scan kernel memory to check memory leak. With hardware
tag-based kasan enabled, when it scans on the invalid slab and
dereference, the issue will occur as below.
Hardware tag-based KASAN doesn't use compiler instrumentation, we can not
use kasan_disable_current() to ignore tag check.
Based on the below report, there are 11 0xf7 granules, which amounts to
176 bytes, and the object is allocated from the kmalloc-256 cache. So
when kmemleak accesses the last 256-176 bytes, it causes faults, as those
are marked with KASAN_KMALLOC_REDZONE == KASAN_TAG_INVALID == 0xfe.
Thus, we reset tags before accessing metadata to avoid from false positives.
BUG: KASAN: out-of-bounds in scan_block+0x58/0x170
Read at addr
f7ff0000c0074eb0 by task kmemleak/138
Pointer tag: [f7], memory tag: [fe]
CPU: 7 PID: 138 Comm: kmemleak Not tainted 5.14.0-rc2-00001-g8cae8cd89f05-dirty #134
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x1b0
show_stack+0x1c/0x30
dump_stack_lvl+0x68/0x84
print_address_description+0x7c/0x2b4
kasan_report+0x138/0x38c
__do_kernel_fault+0x190/0x1c4
do_tag_check_fault+0x78/0x90
do_mem_abort+0x44/0xb4
el1_abort+0x40/0x60
el1h_64_sync_handler+0xb4/0xd0
el1h_64_sync+0x78/0x7c
scan_block+0x58/0x170
scan_gray_list+0xdc/0x1a0
kmemleak_scan+0x2ac/0x560
kmemleak_scan_thread+0xb0/0xe0
kthread+0x154/0x160
ret_from_fork+0x10/0x18
Allocated by task 0:
kasan_save_stack+0x2c/0x60
__kasan_kmalloc+0xec/0x104
__kmalloc+0x224/0x3c4
__register_sysctl_paths+0x200/0x290
register_sysctl_table+0x2c/0x40
sysctl_init+0x20/0x34
proc_sys_init+0x3c/0x48
proc_root_init+0x80/0x9c
start_kernel+0x648/0x6a4
__primary_switched+0xc0/0xc8
Freed by task 0:
kasan_save_stack+0x2c/0x60
kasan_set_track+0x2c/0x40
kasan_set_free_info+0x44/0x54
____kasan_slab_free.constprop.0+0x150/0x1b0
__kasan_slab_free+0x14/0x20
slab_free_freelist_hook+0xa4/0x1fc
kfree+0x1e8/0x30c
put_fs_context+0x124/0x220
vfs_kern_mount.part.0+0x60/0xd4
kern_mount+0x24/0x4c
bdev_cache_init+0x70/0x9c
vfs_caches_init+0xdc/0xf4
start_kernel+0x638/0x6a4
__primary_switched+0xc0/0xc8
The buggy address belongs to the object at
ffff0000c0074e00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 176 bytes inside of
256-byte region [
ffff0000c0074e00,
ffff0000c0074f00)
The buggy address belongs to the page:
page:(____ptrval____) refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x100074
head:(____ptrval____) order:2 compound_mapcount:0 compound_pincount:0
flags: 0xbfffc0000010200(slab|head|node=0|zone=2|lastcpupid=0xffff|kasantag=0x0)
raw:
0bfffc0000010200 0000000000000000 dead000000000122 f5ff0000c0002300
raw:
0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff0000c0074c00: f0 f0 f0 f0 f0 f0 f0 f0 f0 fe fe fe fe fe fe fe
ffff0000c0074d00: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
>
ffff0000c0074e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 fe fe fe fe fe
^
ffff0000c0074f00: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
ffff0000c0075000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint
kmemleak: 181 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
Link: https://lkml.kernel.org/r/20210804090957.12393-1-Kuan-Ying.Lee@mediatek.com
Link: https://lkml.kernel.org/r/20210804090957.12393-2-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 13 Aug 2021 23:36:42 +0000 (13:36 -1000)]
Merge tag 'block-5.14-2021-08-13' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes for block that should go into 5.14:
- Revert the mq-deadline cgroup addition. More work is needed on this
front, let's revert it for now and get it right before having it in
a released kernel (Tejun)
- blk-iocost lockdep fix (Ming)
- nbd double completion fix (Xie)
- Fix for non-idling when clearing the shared tag flag (Yu)"
* tag 'block-5.14-2021-08-13' of git://git.kernel.dk/linux-block:
nbd: Aovid double completion of a request
blk-mq: clear active_queues before clearing BLK_MQ_F_TAG_QUEUE_SHARED
Revert "block/mq-deadline: Add cgroup support"
blk-iocost: fix lockdep warning on blkcg->lock
Linus Torvalds [Fri, 13 Aug 2021 23:25:08 +0000 (13:25 -1000)]
Merge tag 'io_uring-5.14-2021-08-13' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A bit bigger than the previous weeks, but mostly just a few stable
bound fixes. In detail:
- Followup fixes to patches from last week for io-wq, turns out they
weren't complete (Hao)
- Two lockdep reported fixes out of the RT camp (me)
- Sync the io_uring-cp example with liburing, as a few bug fixes
never made it to the kernel carried version (me)
- SQPOLL related TIF_NOTIFY_SIGNAL fix (Nadav)
- Use WRITE_ONCE() when writing sq flags (Nadav)
- io_rsrc_put_work() deadlock fix (Pavel)"
* tag 'io_uring-5.14-2021-08-13' of git://git.kernel.dk/linux-block:
tools/io_uring/io_uring-cp: sync with liburing example
io_uring: fix ctx-exit io_rsrc_put_work() deadlock
io_uring: drop ctx->uring_lock before flushing work item
io-wq: fix IO_WORKER_F_FIXED issue in create_io_worker()
io-wq: fix bug of creating io-wokers unconditionally
io_uring: rsrc ref lock needs to be IRQ safe
io_uring: Use WRITE_ONCE() when writing to sq_flags
io_uring: clear TIF_NOTIFY_SIGNAL when running task work
Linus Torvalds [Fri, 13 Aug 2021 22:41:45 +0000 (12:41 -1000)]
Merge tag 'pinctrl-v5.14-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"An assortment of pin control fixes of varying importance, the most
important ones affecting Intel and AMD laptops turned up the recent
few days so it's time to push this to your tree.
- Fix the Kconfig dependency for Qualcomm SM8350 pin controller
- Fix pin biasing fallback behaviour on the Mediatek pin controller
- Fix the GPIO numbering scheme for Intel Tiger Lake-H to correspond
to the products that are now actually out on the market
- Fix a pin control function itemization in the Sunxi driver
out-of-bounds access bug
- Fix disable clocking for the RISC-V K210 pin controller on the
errorpath
- Fix a system shutdown bug affecting AMD Ryzen-based laptops, the
system would not suspend but just bounce back up"
* tag 'pinctrl-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: Fix an issue with shutdown when system set to s0ix
pinctrl: k210: Fix k210_fpioa_probe()
pinctrl: sunxi: Don't underestimate number of functions
pinctrl: tigerlake: Fix GPIO mapping for newer version of software
pinctrl: mediatek: Fix fallback behavior for bias_set_combo
pinctrl: qcom: fix GPIOLIB dependencies
Maxim Kochetkov [Wed, 11 Aug 2021 07:10:36 +0000 (10:10 +0300)]
soc: fsl: qe: fix static checker warning
The patch
be7ecbd240b2: "soc: fsl: qe: convert QE interrupt
controller to platform_device" from Aug 3, 2021, leads to the
following static checker warning:
drivers/soc/fsl/qe/qe_ic.c:438 qe_ic_init()
warn: unsigned 'qe_ic->virq_low' is never less than zero.
In old variant irq_of_parse_and_map() returns zero if failed so
unsigned int for virq_high/virq_low was ok.
In new variant platform_get_irq() returns negative error codes
if failed so we need to use int for virq_high/virq_low.
Also simplify high_handler checking and remove the curly braces
to make checkpatch happy.
Fixes:
be7ecbd240b2 ("soc: fsl: qe: convert QE interrupt controller to platform_device")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Jakub Kicinski [Fri, 13 Aug 2021 17:26:20 +0000 (10:26 -0700)]
Merge branch 'bnxt-tx-napi-disabling-resiliency-improvements'
Jakub Kicinski says:
====================
bnxt: Tx NAPI disabling resiliency improvements
A lockdep warning was triggered by netpoll because napi poll
was taking the xmit lock. Fix that and a couple more issues
noticed while reading the code.
====================
Link: https://lore.kernel.org/r/20210812214242.578039-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 12 Aug 2021 21:42:42 +0000 (14:42 -0700)]
bnxt: count Tx drops
Drivers should count packets they are dropping.
Fixes:
c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 12 Aug 2021 21:42:41 +0000 (14:42 -0700)]
bnxt: make sure xmit_more + errors does not miss doorbells
skbs are freed on error and not put on the ring. We may, however,
be in a situation where we're freeing the last skb of a batch,
and there is a doorbell ring pending because of xmit_more() being
true earlier. Make sure we ring the door bell in such situations.
Since errors are rare don't pay attention to xmit_more() and just
always flush the pending frames.
The busy case should be safe to be left alone because it can
only happen if start_xmit races with completions and they
both enable the queue. In that case the kick can't be pending.
Noticed while reading the code.
Fixes:
4d172f21cefe ("bnxt_en: Implement xmit_more.")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 12 Aug 2021 21:42:40 +0000 (14:42 -0700)]
bnxt: disable napi before canceling DIM
napi schedules DIM, napi has to be disabled first,
then DIM canceled.
Noticed while reading the code.
Fixes:
0bc0b97fca73 ("bnxt_en: cleanup DIM work on device shutdown")
Fixes:
6a8788f25625 ("bnxt_en: add support for software dynamic interrupt moderation")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 12 Aug 2021 21:42:39 +0000 (14:42 -0700)]
bnxt: don't lock the tx queue from napi poll
We can't take the tx lock from the napi poll routine, because
netpoll can poll napi at any moment, including with the tx lock
already held.
The tx lock is protecting against two paths - the disable
path, and (as Michael points out) the NETDEV_TX_BUSY case
which may occur if NAPI completions race with start_xmit
and both decide to re-enable the queue.
For the disable/ifdown path use synchronize_net() to make sure
closing the device does not race we restarting the queues.
Annotate accesses to dev_state against data races.
For the NAPI cleanup vs start_xmit path - appropriate barriers
are already in place in the main spot where Tx queue is stopped
but we need to do the same careful dance in the TX_BUSY case.
Fixes:
c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>