cpufreq: intel_pstate: Get per-CPU max freq via MSR_HWP_CAPABILITIES if available

commit 6f67e060083a84a4cc364eab6ae40c717165fb0c upstream.

Currently, when turbo is disabled (either by BIOS or by the user),
the intel_pstate driver reads the max non-turbo frequency from the
package-wide MSR_PLATFORM_INFO(0xce) register.

However, on asymmetric platforms it is possible in theory that small
and big core with HWP enabled might have different max non-turbo CPU
frequency, because MSR_HWP_CAPABILITIES is per-CPU scope according
to Intel Software Developer Manual.

The turbo max freq is already per-CPU in current code, so make
similar change to the max non-turbo frequency as well.

Reported-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject and changelog edits ]
Cc: 4.18+ <stable@vger.kernel.org> # 4.18+: a45ee4d4e13b: cpufreq: intel_pstate: Change intel_pstate_get_hwp_max() argument
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: intel_pstate: Change intel_pstate_get_hwp_max() argument

commit a45ee4d4e13b0e35a8ec7ea0bf9267243d57b302 upstream.

All of the callers of intel_pstate_get_hwp_max() access the struct
cpudata object that corresponds to the given CPU already and the
function itself needs to access that object (in order to update
hwp_cap_cached), so modify the code to pass a struct cpudata pointer
to it instead of the CPU number.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks

commit 67fc209b527d023db4d087c68e44e9790aa089ef upstream.

Commit f17b3e44320b ("cpufreq: qcom-hw: Use
devm_platform_ioremap_resource() to simplify code") introduces
a regression on platforms using the driver, by failing to initialise
a policy, when one is created post hotplug.

When all the CPUs of a policy are hoptplugged out, the call to .exit()
and later to devm_iounmap() does not release the memory region that was
requested during devm_platform_ioremap_resource().  Therefore,
a subsequent call to .init() will result in the following error, which
will prevent a new policy to be initialised:

[ 3395.915416] CPU4: shutdown
[ 3395.938185] psci: CPU4 killed (polled 0 ms)
[ 3399.071424] CPU5: shutdown
[ 3399.094316] psci: CPU5 killed (polled 0 ms)
[ 3402.139358] CPU6: shutdown
[ 3402.161705] psci: CPU6 killed (polled 0 ms)
[ 3404.742939] CPU7: shutdown
[ 3404.765592] psci: CPU7 killed (polled 0 ms)
[ 3411.492274] Detected VIPT I-cache on CPU4
[ 3411.492337] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
[ 3411.492448] CPU4: Booted secondary processor 0x0000000400 [0x516f802d]
[ 3411.503654] qcom-cpufreq-hw 17d43000.cpufreq: can't request region for resource [mem 0x17d45800-0x17d46bff]

With that being said, the original code was tricky and skipping memory
region request intentionally to hide this issue.  The true cause is that
those devm_xxx() device managed functions shouldn't be used for cpufreq
init/exit hooks, because &pdev->dev is alive across the hooks and will
not trigger auto resource free-up.  Let's drop the use of device managed
functions and manually allocate/free resources, so that the issue can be
fixed properly.

Cc: v5.10+ <stable@vger.kernel.org> # v5.10+
Fixes: f17b3e44320b ("cpufreq: qcom-hw: Use devm_platform_ioremap_resource() to simplify code")
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error

commit a51afb13311cd85b2f638c691b2734622277d8f5 upstream.

freq_qos_update_request() returns 1 if the effective constraint value
has changed, 0 if the effective constraint value has not changed, or a
negative error code on failures.

The frequency constraints for CPUs can be set by different parts of the
kernel. If the maximum frequency constraint set by other parts of the
kernel are set at a lower value than the one corresponding to cooling
state 0, then we will never be able to cool down the system as
freq_qos_update_request() will keep on returning 0 and we will skip
updating cpufreq_state and thermal pressure.

Fix that by doing the updates even in the case where
freq_qos_update_request() returns 0, as we have effectively set the
constraint to a new value even if the consolidated value of the
actual constraint is unchanged because of external factors.

Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Reported-by: Thara Gopinath <thara.gopinath@linaro.org>
Fixes: f12e4f66ab6a ("thermal/cpu-cooling: Update thermal pressure in case of a maximum frequency capping")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Thara Gopinath<thara.gopinath@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/b2b7e84944937390256669df5a48ce5abba0c1ef.1613540713.git.viresh.kumar@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTORE

commit bfe3911a91047557eb0e620f95a370aee6a248c7 upstream.

Userspace has discovered the functionality offered by SYS_kcmp and has
started to depend upon it. In particular, Mesa uses SYS_kcmp for
os_same_file_description() in order to identify when two fd (e.g. device
or dmabuf) point to the same struct file. Since they depend on it for
core functionality, lift SYS_kcmp out of the non-default
CONFIG_CHECKPOINT_RESTORE into the selectable syscall category.

Rasmus Villemoes also pointed out that systemd uses SYS_kcmp to
deduplicate the per-service file descriptor store.

Note that some distributions such as Ubuntu are already enabling
CHECKPOINT_RESTORE in their configs and so, by extension, SYS_kcmp.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/3046
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> # DRM depends on kcmp
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> # systemd uses kcmp
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205220012.1983-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zonefs: Fix file size of zones in full condition

commit 059c01039c0185dbee7ed080f1f2bd22cb1e4dab upstream.

Per ZBC/ZAC/ZNS specifications, write pointers may not have valid values
when zones are in full condition. However, when zonefs mounts a zoned
block device, zonefs refers write pointers to set file size even when
the zones are in full condition. This results in wrong file size. To fix
this, refer maximum file size in place of write pointers for zones in
full condition.

Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system")
Cc: <stable@vger.kernel.org> # 5.6+
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: fix shift-out-of-bounds in exfat_fill_super()

commit 78c276f5495aa53a8beebb627e5bf6a54f0af34f upstream.

syzbot reported a warning which could cause shift-out-of-bounds issue.

Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x183/0x22e lib/dump_stack.c:120
 ubsan_epilogue lib/ubsan.c:148 [inline]
 __ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395
 exfat_read_boot_sector fs/exfat/super.c:471 [inline]
 __exfat_fill_super fs/exfat/super.c:556 [inline]
 exfat_fill_super+0x2acb/0x2d00 fs/exfat/super.c:624
 get_tree_bdev+0x406/0x630 fs/super.c:1291
 vfs_get_tree+0x86/0x270 fs/super.c:1496
 do_new_mount fs/namespace.c:2881 [inline]
 path_mount+0x1937/0x2c50 fs/namespace.c:3211
 do_mount fs/namespace.c:3224 [inline]
 __do_sys_mount fs/namespace.c:3432 [inline]
 __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3409
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

exfat specification describe sect_per_clus_bits field of boot sector
could be at most 25 - sect_size_bits and at least 0. And sect_size_bits
can also affect this calculation, It also needs validation.
This patch add validation for sect_per_clus_bits and sect_size_bits
field of boot sector.

Fixes: 719c1e182916 ("exfat: add super block operations")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: syzbot+da4fe66aaadd3c2e2d1c@syzkaller.appspotmail.com
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

printk: fix deadlock when kernel panic

commit 8a8109f303e25a27f92c1d8edd67d7cbbc60a4eb upstream.

printk_safe_flush_on_panic() caused the following deadlock on our
server:

CPU0:                                         CPU1:
panic                                         rcu_dump_cpu_stacks
  kdump_nmi_shootdown_cpus                      nmi_trigger_cpumask_backtrace
    register_nmi_handler(crash_nmi_callback)      printk_safe_flush
                                                    __printk_safe_flush
                                                      raw_spin_lock_irqsave(&read_lock)
    // send NMI to other processors
    apic_send_IPI_allbutself(NMI_VECTOR)
                                                        // NMI interrupt, dead loop
                                                        crash_nmi_callback
  printk_safe_flush_on_panic
    printk_safe_flush
      __printk_safe_flush
        // deadlock
        raw_spin_lock_irqsave(&read_lock)

DEADLOCK: read_lock is taken on CPU1 and will never get released.

It happens when panic() stops a CPU by NMI while it has been in
the middle of printk_safe_flush().

Handle the lock the same way as logbuf_lock. The printk_safe buffers
are flushed only when both locks can be safely taken. It can avoid
the deadlock _in this particular case_ at expense of losing contents
of printk_safe buffers.

Note: It would actually be safe to re-init the locks when all CPUs were
      stopped by NMI. But it would require passing this information
      from arch-specific code. It is not worth the complexity.
      Especially because logbuf_lock and printk_safe buffers have been
      obsoleted by the lockless ring buffer.

Fixes: cf9b1106c81c ("printk/nmi: flush NMI messages on the system panic")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: <stable@vger.kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210210034823.64867-1-songmuchun@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: gateworks-gsc: Fix interrupt type

commit 8d9bf3c3e1451fc8de7b590040a868ade26d6b22 upstream.

The Gateworks System Controller has an active-low interrupt.
Fix the interrupt request type.

Cc: <stable@vger.kernel.org>
Fixes: d85234994b2f ("mfd: Add Gateworks System Controller core driver")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: pcf857x: Fix missing first interrupt

commit a8002a35935aaefcd6a42ad3289f62bab947f2ca upstream.

If no n_latch value will be provided at driver probe then all pins will
be used as an input:

    gpio->out = ~n_latch;

In that case initial state for all pins is "one":

    gpio->status = gpio->out;

So if pcf857x IRQ happens with change pin value from "zero" to "one"
then we miss it, because of "one" from IRQ and "one" from initial state
leaves corresponding pin unchanged:
change = (gpio->status ^ status) & gpio->irq_enabled;

The right solution will be to read actual state at driver probe.

Cc: stable@vger.kernel.org
Fixes: 6e20a0a429bd ("gpio: pcf857x: enable gpio_to_irq() support")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add adler lake point LP DID

commit 930c922a987a02936000f15ea62988b7a39c27f5 upstream.

Add Adler Lake LP device id.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-7-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add adler lake point S DID

commit f7545efaf7950b240de6b8a20b9c3ffd7278538e upstream.

Add Adler Lake S device id.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-6-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: emmitsburg workstation DID

commit 372726cb3957dbd69ded9a4e3419d5c6c3bc648e upstream.

Add Emmitsburg workstation DID.

Cc: <stable@vger.kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-5-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: fix transfer over dma with extended header

commit 1309ecc90f16ee9cc3077761e7f4474369747e6e upstream.

The size in header field for packet transferred over DMA
includes size of the extended header.
Include extended header in size check.
Add size and sanity checks on extended header.

Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spmi: spmi-pmic-arb: Fix hw_irq overflow

commit d19db80a366576d3ffadf2508ed876b4c1faf959 upstream.

Currently, when handling the SPMI summary interrupt, the hw_irq
number is calculated based on SID, Peripheral ID, IRQ index and
APID. This is then passed to irq_find_mapping() to see if a
mapping exists for this hw_irq and if available, invoke the
interrupt handler. Since the IRQ index uses an "int" type, hw_irq
which is of unsigned long data type can take a large value when
SID has its MSB set to 1 and the type conversion happens. Because
of this, irq_find_mapping() returns 0 as there is no mapping
for this hw_irq. This ends up invoking cleanup_irq() as if
the interrupt is spurious whereas it is actually a valid
interrupt. Fix this by using the proper data type (u32) for id.

Cc: stable@vger.kernel.org
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Link: https://lore.kernel.org/r/1612812784-26369-1-git-send-email-subbaram@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210212031417.3148936-1-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/32s: Add missing call to kuep_lock on syscall entry

commit 57fdfbce89137ae85cd5cef48be168040a47dd13 upstream.

Userspace Execution protection and fast syscall entry were implemented
independently from each other and were both merged in kernel 5.2,
leading to syscall entry missing userspace execution protection.

On syscall entry, execution of user space memory must be
locked in the same way as on exception entry.

Fixes: b86fb88855ea ("powerpc/32: implement fast entry for syscalls on non BOOKE")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c65e105b63aaf74f91a14f845bc77192350b84a6.1612796617.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/kexec_file: fix FDT size estimation for kdump kernel

commit 2377c92e37fe97bc5b365f55cf60f56dfc4849f5 upstream.

On systems with large amount of memory, loading kdump kernel through
kexec_file_load syscall may fail with the below error:

    "Failed to update fdt with linux,drconf-usable-memory property"

This happens because the size estimation for kdump kernel's FDT does
not account for the additional space needed to setup usable memory
properties. Fix it by accounting for the space needed to include
linux,usable-memory & linux,drconf-usable-memory properties while
estimating kdump kernel's FDT size.

Fixes: 6ecd0163d360 ("powerpc/kexec_file: Add appropriate regions for memory reserve map")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161243826811.119001.14083048209224609814.stgit@hbathini
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/32: Preserve cr1 in exception prolog stack check to fix build error

commit 3642eb21256a317ac14e9ed560242c6d20cf06d9 upstream.

THREAD_ALIGN_SHIFT = THREAD_SHIFT + 1 = PAGE_SHIFT + 1
Maximum PAGE_SHIFT is 18 for 256k pages so
THREAD_ALIGN_SHIFT is 19 at the maximum.

No need to clobber cr1, it can be preserved when moving r1
into CR when we check stack overflow.

This reduces the number of instructions in Machine Check Exception
prolog and fixes a build failure reported by the kernel test robot
on v5.10 stable when building with RTAS + VMAP_STACK + KVM. That
build failure is due to too many instructions in the prolog hence
not fitting between 0x200 and 0x300. Allthough the problem doesn't
show up in mainline, it is still worth the change.

Fixes: 98bf2d3f4970 ("powerpc/32s: Fix RTAS machine check with VMAP stack")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5ae4d545e3ac58e133d2599e0deb88843cb494fc.1612768623.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failure

commit 1ad9f88014ae1d5abccb6fe930bc4c5c311bdc05 upstream.

Force chip enter L0 power state during SDR104 HW tuning to avoid tuning failure

Signed-off-by: Shirley Her <shirley.her@bayhubtech.com>
Link: https://lore.kernel.org/r/20210206014051.3418-1-shirley.her@bayhubtech.com
Fixes: 7b7d897e8898 ("mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-esdhc-imx: fix kernel panic when remove module

commit a56f44138a2c57047f1ea94ea121af31c595132b upstream.

In sdhci_esdhc_imx_remove() the SDHCI_INT_STATUS in read. Under some
circumstances, this may be done while the device is runtime suspended,
triggering the below splat.

Fix the problem by adding a pm_runtime_get_sync(), before reading the
register, which will turn on clocks etc making the device accessible again.

[ 1811.323148] mmc1: card aaaa removed
[ 1811.347483] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
[ 1811.354988] Modules linked in: sdhci_esdhc_imx(-) sdhci_pltfm sdhci cqhci mmc_block mmc_core [last unloaded: mmc_core]
[ 1811.365726] CPU: 0 PID: 3464 Comm: rmmod Not tainted 5.10.1-sd-99871-g53835a2e8186 #5
[ 1811.373559] Hardware name: Freescale i.MX8DXL EVK (DT)
[ 1811.378705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 1811.384723] pc : sdhci_esdhc_imx_remove+0x28/0x15c [sdhci_esdhc_imx]
[ 1811.391090] lr : platform_drv_remove+0x2c/0x50
[ 1811.395536] sp : ffff800012c7bcb0
[ 1811.398855] x29: ffff800012c7bcb0 x28: ffff00002c72b900
[ 1811.404181] x27: 0000000000000000 x26: 0000000000000000
[ 1811.409497] x25: 0000000000000000 x24: 0000000000000000
[ 1811.414814] x23: ffff0000042b3890 x22: ffff800009127120
[ 1811.420131] x21: ffff00002c4c9580 x20: ffff0000042d0810
[ 1811.425456] x19: ffff0000042d0800 x18: 0000000000000020
[ 1811.430773] x17: 0000000000000000 x16: 0000000000000000
[ 1811.436089] x15: 0000000000000004 x14: ffff000004019c10
[ 1811.441406] x13: 0000000000000000 x12: 0000000000000020
[ 1811.446723] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
[ 1811.452040] x9 : fefefeff6364626d x8 : 7f7f7f7f7f7f7f7f
[ 1811.457356] x7 : 78725e6473607372 x6 : 0000000080808080
[ 1811.462673] x5 : 0000000000000000 x4 : 0000000000000000
[ 1811.467990] x3 : ffff800011ac1cb0 x2 : 0000000000000000
[ 1811.473307] x1 : ffff8000091214d4 x0 : ffff8000133a0030
[ 1811.478624] Call trace:
[ 1811.481081]  sdhci_esdhc_imx_remove+0x28/0x15c [sdhci_esdhc_imx]
[ 1811.487098]  platform_drv_remove+0x2c/0x50
[ 1811.491198]  __device_release_driver+0x188/0x230
[ 1811.495818]  driver_detach+0xc0/0x14c
[ 1811.499487]  bus_remove_driver+0x5c/0xb0
[ 1811.503413]  driver_unregister+0x30/0x60
[ 1811.507341]  platform_driver_unregister+0x14/0x20
[ 1811.512048]  sdhci_esdhc_imx_driver_exit+0x1c/0x3a8 [sdhci_esdhc_imx]
[ 1811.518495]  __arm64_sys_delete_module+0x19c/0x230
[ 1811.523291]  el0_svc_common.constprop.0+0x78/0x1a0
[ 1811.528086]  do_el0_svc+0x24/0x90
[ 1811.531405]  el0_svc+0x14/0x20
[ 1811.534461]  el0_sync_handler+0x1a4/0x1b0
[ 1811.538474]  el0_sync+0x174/0x180
[ 1811.541801] Code: a9025bf5 f9403e95 f9400ea0 9100c000 (b9400000)
[ 1811.547902] ---[ end trace 3fb1a3bd48ff7be5 ]---

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org # v4.0+
Link: https://lore.kernel.org/r/20210210181933.29263-1-Frank.Li@nxp.com
[Ulf: Clarified the commit message a bit]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols

commit ebfac7b778fac8b0e8e92ec91d0b055f046b4604 upstream.

clang-12 -fno-pic (since
https://github.com/llvm/llvm-project/commit/a084c0388e2a59b9556f2de0083333232da3f1d6)
can emit `call __stack_chk_fail@PLT` instead of `call __stack_chk_fail`
on x86.  The two forms should have identical behaviors on x86-64 but the
former causes GNU as<2.37 to produce an unreferenced undefined symbol
_GLOBAL_OFFSET_TABLE_.

(On x86-32, there is an R_386_PC32 vs R_386_PLT32 difference but the
linker behavior is identical as far as Linux kernel is concerned.)

Simply ignore _GLOBAL_OFFSET_TABLE_ for now, like what
scripts/mod/modpost.c:ignore_undef_symbol does. This also fixes the
problem for gcc/clang -fpie and -fpic, which may emit `call foo@PLT` for
external function calls on x86.

Note: ld -z defs and dynamic loaders do not error for unreferenced
undefined symbols so the module loader is reading too much.  If we ever
need to ignore more symbols, the code should be refactored to ignore
unreferenced symbols.

Cc: <stable@vger.kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1250
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27178
Reported-by: Marco Elver <elver@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Marco Elver <elver@google.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: qcom-spmi-sdam: Fix uninitialized pdev pointer

commit e2057ee29973b9741d43d3f475a6b02fb46a0e61 upstream.

"sdam->pdev" is uninitialized and it is used to print error logs.
Fix it. Since device pointer can be used from sdam_config, use it
directly thereby removing pdev pointer.

Fixes: 40ce9798794f ("nvmem: add QTI SDAM driver")
Cc: stable@vger.kernel.org
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210205100853.32372-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nSVM: fix running nested guests when npt=0

commit a04aead144fd938c2d9869eb187e5b9ea0009bae upstream.

In case of npt=0 on host, nSVM needs the same .inject_page_fault tweak
as VMX has, to make sure that shadow mmu faults are injected as vmexits.

It is not clear why this is needed at all, but for now keep the same
code as VMX and we'll fix it for both.

Based on a patch by Maxim Levitsky <mlevitsk@redhat.com>.

Fixes: 7c86663b68ba ("KVM: nSVM: inject exceptions via svm_check_nested_events")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, compaction: make fast_isolate_freepages() stay within zone

commit 6e2b7044c199229a3d20cefbd3184968238c4184 upstream.

Compaction always operates on pages from a single given zone when
isolating both pages to migrate and freepages.  Pageblock boundaries are
intersected with zone boundaries to be safe in case zone starts or ends in
the middle of pageblock.  The use of pageblock_pfn_to_page() protects
against non-contiguous pageblocks.

The functions fast_isolate_freepages() and fast_isolate_around() don't
currently protect the fast freepage isolation thoroughly enough against
these corner cases, and can result in freepage isolation operate outside
of zone boundaries:

 - in fast_isolate_freepages() if we get a pfn from the first pageblock
   of a zone that starts in the middle of that pageblock, 'highest' can
   be a pfn outside of the zone.

   If we fail to isolate anything in this function, we may then call
   fast_isolate_around() on a pfn outside of the zone and there
   effectively do a set_pageblock_skip(page_to_pfn(highest)) which may
   currently hit a VM_BUG_ON() in some configurations

 - fast_isolate_around() checks only the zone end boundary and not
   beginning, nor that the pageblock is contiguous (with
   pageblock_pfn_to_page()) so it's possible that we end up calling
   isolate_freepages_block() on a range of pfn's from two different
   zones and end up e.g. isolating freepages under the wrong zone's
   lock.

This patch should fix the above issues.

Link: https://lkml.kernel.org/r/20210217173300.6394-1-vbabka@suse.cz
Fixes: 5a811889de10 ("mm, compaction: use free lists to quickly locate a migration target")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/vmscan: restore zone_reclaim_mode ABI

commit 519983645a9f2ec339cabfa0c6ef7b09be985dd0 upstream.

I went to go add a new RECLAIM_* mode for the zone_reclaim_mode sysctl.
Like a good kernel developer, I also went to go update the
documentation.  I noticed that the bits in the documentation didn't
match the bits in the #defines.

The VM never explicitly checks the RECLAIM_ZONE bit.  The bit is,
however implicitly checked when checking 'node_reclaim_mode==0'.  The
RECLAIM_ZONE #define was removed in a cleanup.  That, by itself is fine.

But, when the bit was removed (bit 0) the _other_ bit locations also got
changed.  That's not OK because the bit values are documented to mean
one specific thing.  Users surely do not expect the meaning to change
from kernel to kernel.

The end result is that if someone had a script that did:

sysctl vm.zone_reclaim_mode=1

it would have gone from enabling node reclaim for clean unmapped pages
to writing out pages during node reclaim after the commit in question.
That's not great.

Put the bits back the way they were and add a comment so something like
this is a bit harder to do again.  Update the documentation to make it
clear that the first bit is ignored.

Link: https://lkml.kernel.org/r/20210219172555.FF0CDF23@viggo.jf.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 648b5cf368e0 ("mm/vmscan: remove unused RECLAIM_OFF/RECLAIM_ZONE")
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlb: fix copy_huge_page_from_user contig page struct assumption

commit 3272cfc2525b3a2810a59312d7a1e6f04a0ca3ef upstream.

page structs are not guaranteed to be contiguous for gigantic pages.  The
routine copy_huge_page_from_user can encounter gigantic pages, yet it
assumes page structs are contiguous when copying pages from user space.

Since page structs for the target gigantic page are not contiguous, the
data copied from user space could overwrite other pages not associated
with the gigantic page and cause data corruption.

Non-contiguous page structs are generally not an issue.  However, they can
exist with a specific kernel configuration and hotplug operations.  For
example: Configure the kernel with CONFIG_SPARSEMEM and
!CONFIG_SPARSEMEM_VMEMMAP.  Then, hotplug add memory for the area where
the gigantic page will be allocated.

Link: https://lkml.kernel.org/r/20210217184926.33567-2-mike.kravetz@oracle.com
Fixes: 8fb5debc5fcd ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlb: fix update_and_free_page contig page struct assumption

commit dbfee5aee7e54f83d96ceb8e3e80717fac62ad63 upstream.

page structs are not guaranteed to be contiguous for gigantic pages.  The
routine update_and_free_page can encounter a gigantic page, yet it assumes
page structs are contiguous when setting page flags in subpages.

If update_and_free_page encounters non-contiguous page structs, we can see
“BUG: Bad page state in process …” errors.

Non-contiguous page structs are generally not an issue.  However, they can
exist with a specific kernel configuration and hotplug operations.  For
example: Configure the kernel with CONFIG_SPARSEMEM and
!CONFIG_SPARSEMEM_VMEMMAP.  Then, hotplug add memory for the area where
the gigantic page will be allocated.  Zi Yan outlined steps to reproduce
here [1].

[1] https://lore.kernel.org/linux-mm/16F7C58B-4D79-41C5-9B64-A1A1628F4AF2@nvidia.com/

Link: https://lkml.kernel.org/r/20210217184926.33567-1-mike.kravetz@oracle.com
Fixes: 944d9fec8d7a ("hugetlb: add support for gigantic page allocation at runtime")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: memcontrol: fix get_active_memcg return value

commit 1685bde6b9af55923180a76152036c7fb7176db0 upstream.

We use a global percpu int_active_memcg variable to store the remote memcg
when we are in the interrupt context.  But get_active_memcg always return
the current->active_memcg or root_mem_cgroup.  The remote memcg (set in
the interrupt context) is ignored.  This is not what we want.  So fix it.

Link: https://lkml.kernel.org/r/20210223091101.42150-1-songmuchun@bytedance.com
Fixes: 37d5985c003d ("mm: kmem: prepare remote memcg charging infra for interrupt contexts")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: memcontrol: fix swap undercounting in cgroup2

commit cae3af62b33aa931427a0f211e04347b22180b36 upstream.

When pages are swapped in, the VM may retain the swap copy to avoid
repeated writes in the future.  It's also retained if shared pages are
faulted back in some processes, but not in others.  During that time we
have an in-memory copy of the page, as well as an on-swap copy.  Cgroup1
and cgroup2 handle these overlapping lifetimes slightly differently due to
the nature of how they account memory and swap:

Cgroup1 has a unified memory+swap counter that tracks a data page
regardless whether it's in-core or swapped out.  On swapin, we transfer
the charge from the swap entry to the newly allocated swapcache page, even
though the swap entry might stick around for a while.  That's why we have
a mem_cgroup_uncharge_swap() call inside mem_cgroup_charge().

Cgroup2 tracks memory and swap as separate, independent resources and thus
has split memory and swap counters.  On swapin, we charge the newly
allocated swapcache page as memory, while the swap slot in turn must
remain charged to the swap counter as long as its allocated too.

The cgroup2 logic was broken by commit 2d1c498072de ("mm: memcontrol: make
swap tracking an integral part of memory control"), because it
accidentally removed the do_memsw_account() check in the branch inside
mem_cgroup_uncharge() that was supposed to tell the difference between the
charge transfer in cgroup1 and the separate counters in cgroup2.

As a result, cgroup2 currently undercounts retained swap to varying
degrees: swap slots are cached up to 50% of the configured limit or total
available swap space; partially faulted back shared pages are only limited
by physical capacity.  This in turn allows cgroups to significantly
overconsume their alloted swap space.

Add the do_memsw_account() check back to fix this problem.

Link: https://lkml.kernel.org/r/20210217153237.92484-1-songmuchun@bytedance.com
Fixes: 2d1c498072de ("mm: memcontrol: make swap tracking an integral part of memory control")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: fix seq_file iteration for pat/memtype.c

commit 3d2fc4c082448e9c05792f9b2a11c1d5db408b85 upstream.

The memtype seq_file iterator allocates a buffer in the ->start and ->next
functions and frees it in the ->show function.  The preferred handling for
such resources is to free them in the subsequent ->next or ->stop function
call.

Since Commit 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration
code and interface") there is no guarantee that ->show will be called
after ->next, so this function can now leak memory.

So move the freeing of the buffer to ->next and ->stop.

Link: https://lkml.kernel.org/r/161248539022.21478.13874455485854739066.stgit@noble1
Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface")
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

seq_file: document how per-entry resources are managed.

commit b3656d8227f4c45812c6b40815d8f4e446ed372a upstream.

Patch series "Fix some seq_file users that were recently broken".

A recent change to seq_file broke some users which were using seq_file
in a non-"standard" way ...  though the "standard" isn't documented, so
they can be excused.  The result is a possible leak - of memory in one
case, of references to a 'transport' in the other.

These three patches:
 1/ document and explain the problem
 2/ fix the problem user in x86
 3/ fix the problem user in net/sctp

This patch (of 3):

Users of seq_file will sometimes find it convenient to take a resource,
such as a lock or memory allocation, in the ->start or ->next operations.
These are per-entry resources, distinct from per-session resources which
are taken in ->start and released in ->stop.

The preferred management of these is release the resource on the
subsequent call to ->next or ->stop.

However prior to Commit 1f4aace60b0e ("fs/seq_file.c: simplify seq_file
iteration code and interface") it happened that ->show would always be
called after ->start or ->next, and a few users chose to release the
resource in ->show.

This is no longer reliable.  Since the mentioned commit, ->next will
always come after a successful ->show (to ensure m->index is updated
correctly), so the original ordering cannot be maintained.

This patch updates the documentation to clearly state the required
behaviour.  Other patches will fix the few problematic users.

[akpm@linux-foundation.org: fix typo, per Willy]

Link: https://lkml.kernel.org/r/161248518659.21478.2484341937387294998.stgit@noble1
Link: https://lkml.kernel.org/r/161248539020.21478.3147971477400875336.stgit@noble1
Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface")
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/affs: release old buffer head on error path

commit 70779b897395b330ba5a47bed84f94178da599f9 upstream.

The reference count of the old buffer head should be decremented on path
that fails to get the new buffer head.

Fixes: 6b4657667ba0 ("fs/affs: add rename exchange")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: hisi-sfc: Put child node np on error path

commit fe6653460ee7a7dbe0cd5fd322992af862ce5ab0 upstream.

Put the child node np when it fails to get or register device.

Fixes: e523f11141bd ("mtd: spi-nor: add hisilicon spi-nor flash controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Pan Bian <bianpan2016@163.com>
[ta: Add Fixes tag and Cc stable]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20210121091847.85362-1-bianpan2016@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: core: Add erase size check for erase command initialization

commit 58fa22f68fcaff20ce4d08a6adffa64f65ccd37d upstream.

Even if erase type is same as previous region, erase size can be different
if the previous region is overlaid region. Since 'region->size' is assigned
to 'cmd->size' for overlaid region, comparing 'erase->size' and 'cmd->size'
can detect previous overlaid region.

Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
Cc: stable@vger.kernel.org
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
[ta: Add Fixes tag and Cc to stable]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/13d47e8d8991b8a7fd8cc7b9e2a5319c56df35cc.1601612872.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: core: Fix erase type discovery for overlaid region

commit 969b276718de37dfe66fce3a5633f611e8cd58fd upstream.

In case of overlaid regions in which their biggest erase size command
overpasses in size the region's size, only the non-overlaid portion of
the sector gets erased. For example, if a Sector Erase command is applied
to a 256-kB range that is overlaid by 4-kB sectors, the overlaid 4-kB
sectors are not affected by the erase.
For overlaid regions, 'region->size' is assigned to 'cmd->size' later in
spi_nor_init_erase_cmd(), so 'erase->size' can be greater than 'len'.

Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
Cc: stable@vger.kernel.org
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
[ta: Update commit description, add Fixes tag and Cc to stable]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/fa5d8b944a5cca488ac54ba37c95e775ac2deb34.1601612872.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: sfdp: Fix wrong erase type bitmask for overlaid region

commit abdf5a5ef9652bad4d58058bc22ddf23543ba3e1 upstream.

At the time spi_nor_region_check_overlay() is called, the erase types are
sorted in ascending order of erase size. The 'erase_type' should be masked
with 'BIT(erase[i].idx)' instead of 'BIT(i)'.

Fixes: b038e8e3be72 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table")
Cc: stable@vger.kernel.org
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
[ta: Add Fixes tag and Cc to stable]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/fd90c40d5b626a1319a78fc2bcee79a8871d4d57.1601612872.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: sfdp: Fix last erase region marking

commit 9166f4af32db74e1544a2149aef231ff24515ea3 upstream.

The place of spi_nor_region_mark_end() must be moved, because 'i' is
re-used for the index of erase[].

Fixes: b038e8e3be72 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table")
Cc: stable@vger.kernel.org
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
[ta: Add Fixes tag and Cc to stable]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/02ce8d84b7989ebee33382f6494df53778dd508e.1601612872.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: etm4x: Handle accesses to TRCSTALLCTLR

commit f72896063396b0cb205cbf0fd76ec6ab3ca11c8a upstream.

TRCSTALLCTLR register is only implemented if

   TRCIDR3.STALLCTL == 0b1

Make sure the driver touches the register only it is implemented.

Link: https://lore.kernel.org/r/20210127184617.3684379-1-suzuki.poulose@arm.com
Cc: stable@vger.kernel.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-32-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: mei_wdt: request stop on unregister

commit 740c0a57b8f1e36301218bf549f3c9cc833a60be upstream.

The MEI bus has a special behavior on suspend it destroys
all the attached devices, this is due to the fact that also
firmware context is not persistent across power flows.

If watchdog on MEI bus is ticking before suspending the firmware
times out and reports that the OS is missing watchdog tick.
Send the stop command to the firmware on watchdog unregistered
to eliminate the false event on suspend.
This does not make the things worse from the user-space perspective
as a user-space should re-open watchdog device after
suspending before this patch.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210124114938.373885-1-tomas.winkler@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: qcom: Remove incorrect usage of QCOM_WDT_ENABLE_IRQ

commit a4f3407c41605d14f09e490045d0609990cd5d94 upstream.

As per register documentation, QCOM_WDT_ENABLE_IRQ which is BIT(1)
of watchdog control register is wakeup interrupt enable bit and
not related to bark interrupt at all, BIT(0) is used for that.
So remove incorrect usage of this bit when supporting bark irq for
pre-timeout notification. Currently with this bit set and bark
interrupt specified, pre-timeout notification and/or watchdog
reset/bite does not occur.

Fixes: 36375491a439 ("watchdog: qcom: support pre-timeout when the bark irq is available")
Cc: stable@vger.kernel.org
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210126150241.10009-1-saiprakash.ranjan@codeaurora.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Disable KSAN_SANITIZE for vDSO

commit f3d60f2a25e4417e1676161fe42115de3e3f98a2 upstream.

We use the generic C VDSO implementations of a handful of clock-related
functions.  When kasan is enabled this results in asan stub calls that
are unlikely to be resolved by userspace, this just disables KASAN
when building the VDSO.

Verified the fix on a kernel with KASAN enabled using vDSO selftests.

Link: https://lore.kernel.org/lkml/CACT4Y+ZNJBnkKHXUf=tm_yuowvZvHwN=0rmJ=7J+xFd+9r_6pQ@mail.gmail.com/
Tested-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
[Palmer: commit text]
Fixes: ad5d1122b82f ("riscv: use vDSO common flow to reduce the latency of the time-related functions")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: spectre: Prevent lockdep splat on v4 mitigation enable path

commit a2c42bbabbe260b7626d8459093631a6e16ee0ee upstream.

The Spectre-v4 workaround is re-configured when resuming from suspend,
as the firmware may have re-enabled the mitigation despite the user
previously asking for it to be disabled.

Enabling or disabling the workaround can result in an undefined
instruction exception on CPUs which implement PSTATE.SSBS but only allow
it to be configured by adjusting the SPSR on exception return. We handle
this by installing an 'undef hook' which effectively emulates the access.

Installing this hook requires us to take a couple of spinlocks both to
avoid corrupting the internal list of hooks but also to ensure that we
don't run into an unhandled exception. Unfortunately, when resuming from
suspend, we haven't yet called rcu_idle_exit() and so lockdep gets angry
about "suspicious RCU usage". In doing so, it tries to print a warning,
which leads it to get even more suspicious, this time about itself:

 |  rcu_scheduler_active = 2, debug_locks = 1
 |  RCU used illegally from extended quiescent state!
 |  1 lock held by swapper/0:
 |   #0: (logbuf_lock){-.-.}-{2:2}, at: vprintk_emit+0x88/0x198
 |
 |  Call trace:
 |   dump_backtrace+0x0/0x1d8
 |   show_stack+0x18/0x24
 |   dump_stack+0xe0/0x17c
 |   lockdep_rcu_suspicious+0x11c/0x134
 |   trace_lock_release+0xa0/0x160
 |   lock_release+0x3c/0x290
 |   _raw_spin_unlock+0x44/0x80
 |   vprintk_emit+0xbc/0x198
 |   vprintk_default+0x44/0x6c
 |   vprintk_func+0x1f4/0x1fc
 |   printk+0x54/0x7c
 |   lockdep_rcu_suspicious+0x30/0x134
 |   trace_lock_acquire+0xa0/0x188
 |   lock_acquire+0x50/0x2fc
 |   _raw_spin_lock+0x68/0x80
 |   spectre_v4_enable_mitigation+0xa8/0x30c
 |   __cpu_suspend_exit+0xd4/0x1a8
 |   cpu_suspend+0xa0/0x104
 |   psci_cpu_suspend_enter+0x3c/0x5c
 |   psci_enter_idle_state+0x44/0x74
 |   cpuidle_enter_state+0x148/0x2f8
 |   cpuidle_enter+0x38/0x50
 |   do_idle+0x1f0/0x2b4

Prevent these splats by running __cpu_suspend_exit() with RCU watching.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Suggested-by: "Paul E . McKenney" <paulmck@kernel.org>
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Fixes: c28762070ca6 ("arm64: Rewrite Spectre-v4 mitigation code")
Cc: <stable@vger.kernel.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210218140346.5224-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64 module: set plt* section addresses to 0x0

commit f5c6d0fcf90ce07ee0d686d465b19b247ebd5ed7 upstream.

These plt* and .text.ftrace_trampoline sections specified for arm64 have
non-zero addressses. Non-zero section addresses in a relocatable ELF would
confuse GDB when it tries to compute the section offsets and it ends up
printing wrong symbol addresses. Therefore, set them to zero, which mirrors
the change in commit 5d8591bc0fba ("module: set ksymtab/kcrctab* section
addresses to 0x0").

Reported-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Shaoying Xu <shaoyi@amazon.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210216183234.GA23876@amazon.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: uprobe: Return EOPNOTSUPP for AARCH32 instruction probing

commit d47422d953e258ad587b5edf2274eb95d08bdc7d upstream.

As stated in linux/errno.h, ENOTSUPP should never be seen by user programs.
When we set up uprobe with 32-bit perf and arm64 kernel, we would see the
following vague error without useful hint.

The sys_perf_event_open() syscall returned with 524 (INTERNAL ERROR:
strerror_r(524, [buf], 128)=22)

Use EOPNOTSUPP instead to indicate such cases.

Signed-off-by: He Zhe <zhe.he@windriver.com>
Link: https://lore.kernel.org/r/20210223082535.48730-1-zhe.he@windriver.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: kexec_file: fix memory leakage in create_dtb() when fdt_open_into() fails

commit 656d1d58d8e0958d372db86c24f0b2ea36f50888 upstream.

in function create_dtb(), if fdt_open_into() fails, we need to vfree
buf before return.

Fixes: 52b2a8af7436 ("arm64: kexec_file: load initrd and device-tree")
Cc: stable@vger.kernel.org # v5.0
Signed-off-by: qiuguorui1 <qiuguorui1@huawei.com>
Link: https://lore.kernel.org/r/20210218125900.6810-1-qiuguorui1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu-qcom: Fix mask extraction for bootloader programmed SMRs

commit dead723e6f049e9fb6b05e5b93456982798ea961 upstream.

When extracting the mask for a SMR that was programmed by the
bootloader, the SMR's valid bit is also extracted and is treated
as part of the mask, which is not correct. Consider the scenario
where an SMMU master whose context is determined by a bootloader
programmed SMR is removed (omitting parts of device/driver core):

->iommu_release_device()
 -> arm_smmu_release_device()
  -> arm_smmu_master_free_smes()
   -> arm_smmu_free_sme() /* Assume that the SME is now free */
   -> arm_smmu_write_sme()
    -> arm_smmu_write_smr() /* Construct SMR value using mask and SID */

Since the valid bit was considered as part of the mask, the SMR will
be programmed as valid.

Fix the SMR mask extraction step for bootloader programmed SMRs
by masking out the valid bit when we know that we're already
working with a valid SMR.

Fixes: 07a7f2caaa5a ("iommu/arm-smmu-qcom: Read back stream mappings")
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Cc: stable@vger.kernel.org
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1611611545-19055-1-git-send-email-isaacm@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Extend workaround for erratum 1024718 to all versions of Cortex-A55

commit c0b15c25d25171db4b70cc0b7dbc1130ee94017d upstream.

The erratum 1024718 affects Cortex-A55 r0p0 to r2p0. However
we apply the work around for r0p0 - r1p0. Unfortunately this
won't be fixed for the future revisions for the CPU. Thus
extend the work around for all versions of A55, to cover
for r2p0 and any future revisions.

Cc: stable@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210203230057.3961239-1-suzuki.poulose@arm.com
[will: Update Kconfig help text]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes: Fix to delay the kprobes jump optimization

commit c85c9a2c6e368dc94907e63babb18a9788e5c9b6 upstream.

Commit 36dadef23fcc ("kprobes: Init kprobes in early_initcall")
moved the kprobe setup in early_initcall(), which includes kprobe
jump optimization.
The kprobes jump optimizer involves synchronize_rcu_tasks() which
depends on the ksoftirqd and rcu_spawn_tasks_*(). However, since
those are setup in core_initcall(), kprobes jump optimizer can not
run at the early_initcall().

To avoid this issue, make the kprobe optimization disabled in the
early_initcall() and enables it in subsys_initcall().

Note that non-optimized kprobes is still available after
early_initcall(). Only jump optimization is delayed.

Link: https://lkml.kernel.org/r/161365856280.719838.12423085451287256713.stgit@devnote2
Fixes: 36dadef23fcc ("kprobes: Init kprobes in early_initcall")
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: RCU <rcu@vger.kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Theodore Y . Ts'o" <tytso@mit.edu>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: stable@vger.kernel.org
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: Uladzislau Rezki <urezki@gmail.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rcu/nocb: Perform deferred wake up before last idle's need_resched() check

commit 43789ef3f7d61aa7bed0cb2764e588fc990c30ef upstream.

Entering RCU idle mode may cause a deferred wake up of an RCU NOCB_GP
kthread (rcuog) to be serviced.

Usually a local wake up happening while running the idle task is handled
in one of the need_resched() checks carefully placed within the idle
loop that can break to the scheduler.

Unfortunately the call to rcu_idle_enter() is already beyond the last
generic need_resched() check and we may halt the CPU with a resched
request unhandled, leaving the task hanging.

Fix this with splitting the rcuog wakeup handling from rcu_idle_enter()
and place it before the last generic need_resched() check in the idle
loop. It is then assumed that no call to call_rcu() will be performed
after that in the idle loop until the CPU is put in low power mode.

Fixes: 96d3fd0d315a (rcu: Break call_rcu() deadlock involving scheduler and perf)
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210131230548.32970-3-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers

commit 54b7429efffc99e845ba9381bee3244f012a06c2 upstream.

Deferred wakeup of rcuog kthreads upon RCU idle mode entry is going to
be handled differently whether initiated by idle, user or guest. Prepare
with pulling that control up to rcu_eqs_enter() callers.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210131230548.32970-2-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/prom: Fix "ibm,arch-vec-5-platform-support" scan

commit ed5b00a05c2ae95b59adc3442f45944ec632e794 upstream.

The "ibm,arch-vec-5-platform-support" property is a list of pairs of
bytes representing the options and values supported by the platform
firmware. At boot time, Linux scans this list and activates the
available features it recognizes : Radix and XIVE.

A recent change modified the number of entries to loop on and 8 bytes,
4 pairs of { options, values } entries are always scanned. This is
fine on KVM but not on PowerVM which can advertises less. As a
consequence on this platform, Linux reads extra entries pointing to
random data, interprets these as available features and tries to
activate them, leading to a firmware crash in
ibm,client-architecture-support.

Fix that by using the property length of "ibm,arch-vec-5-platform-support".

Fixes: ab91239942a9 ("powerpc/prom: Remove VLA in prom_check_platform_support()")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210122075029.797013-1-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry: Fix instrumentation annotation

commit 15f720aabe71a5662c4198b22532d95bbeec80ef upstream.

Embracing a callout into instrumentation_begin() / instrumentation_begin()
does not really make sense. Make the latter instrumentation_end().

Fixes: 2f6474e4636b ("x86/entry: Switch XEN/PV hypercall entry to IDTENTRY")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210210002512.106502464@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fault: Fix AMD erratum #91 errata fixup for user code

commit 35f1c89b0cce247bf0213df243ed902989b1dcda upstream.

The recent rework of probe_kernel_address() and its conversion to
get_kernel_nofault() inadvertently broke is_prefetch(). Before this
change, probe_kernel_address() was used as a sloppy "read user or
kernel memory" helper, but it doesn't do that any more. The new
get_kernel_nofault() reads *kernel* memory only, which completely broke
is_prefetch() for user access.

Adjust the code to the correct accessor based on access mode. The
manual address bounds check is no longer necessary, since the accessor
helpers (get_user() / get_kernel_nofault()) do the right thing all by
themselves. As a bonus, by using the correct accessor, the open-coded
address bounds check is not needed anymore.

 [ bp: Massage commit message. ]

Fixes: eab0c6089b68 ("maccess: unify the probe kernel arch hooks")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/b91f7f92f3367d2d3a88eec3b09c6aab1b2dc8ef.1612924255.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/reboot: Force all cpus to exit VMX root if VMX is supported

commit ed72736183c45a413a8d6974dd04be90f514cb6b upstream.

Force all CPUs to do VMXOFF (via NMI shootdown) during an emergency
reboot if VMX is _supported_, as VMX being off on the current CPU does
not prevent other CPUs from being in VMX root (post-VMXON).  This fixes
a bug where a crash/panic reboot could leave other CPUs in VMX root and
prevent them from being woken via INIT-SIPI-SIPI in the new kernel.

Fixes: d176720d34c7 ("x86: disable VMX on all CPUs on reboot")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David P. Reed <dpreed@deepplum.com>
[sean: reworked changelog and further tweaked comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20201231002702.2223707-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/virt: Eat faults on VMXOFF in reboot flows

commit aec511ad153556640fb1de38bfe00c69464f997f upstream.

Silently ignore all faults on VMXOFF in the reboot flows as such faults
are all but guaranteed to be due to the CPU not being in VMX root.
Because (a) VMXOFF may be executed in NMI context, e.g. after VMXOFF but
before CR4.VMXE is cleared, (b) there's no way to query the CPU's VMX
state without faulting, and (c) the whole point is to get out of VMX
root, eating faults is the simplest way to achieve the desired behaior.

Technically, VMXOFF can fault (or fail) for other reasons, but all other
fault and failure scenarios are mode related, i.e. the kernel would have
to magically end up in RM, V86, compat mode, at CPL>0, or running with
the SMI Transfer Monitor active.  The kernel is beyond hosed if any of
those scenarios are encountered; trying to do something fancy in the
error path to handle them cleanly is pointless.

Fixes: 1e9931146c74 ("x86: asm/virtext.h: add cpu_vmxoff() inline function")
Reported-by: David P. Reed <dpreed@deepplum.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20201231002702.2223707-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: smipcie: fix interrupt handling and IR timeout

commit 6532923237b427ed30cc7b4486f6f1ccdee3c647 upstream.

After the first IR message, interrupts are no longer received. In addition,
the code generates a timeout IR message of 10ms but sets the timeout value
to 100ms, so no timeout was ever generated.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=204317
Fixes: a49a7a4635de ("media: smipcie: add universal ir capability")
Tested-by: Laz Lev <lazlev@web.de>
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: marvell-ccic: power up the device on mclk enable

commit 655ae29da72a693cf294bba3c3322e662ff75bd3 upstream.

Writing to REG_CLKCTRL with the power off causes a hang. Enable the
device first.

Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ipu3-cio2: Fix mbus_code processing in cio2_subdev_set_fmt()

commit 334de4b45892f7e67074e1b1b2ac36fd3e091118 upstream.

Loop was useless as it would always exit on the first iteration. Fix
it with right condition.

Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Fixes: a86cf9b29e8b ("media: ipu3-cio2: Validate mbus format in setting subdev format")
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org # v4.16 and up
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ir_toy: add another IR Droid device

commit 4487e0215560392bd11c9de08d60824d72c89cd9 upstream.

This device is also supported.

Cc: stable@vger.kernel.org
Tested-by: Georgi Bakalski <georgi.bakalski@gmail.com>
Reported-by: Georgi Bakalski <georgi.bakalski@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: i2c: max9286: fix access to unallocated memory

commit e88ccf09e79cf33cac40316ba69c820d9eebc82b upstream.

The asd allocated with v4l2_async_notifier_add_fwnode_subdev() must be
of size max9286_asd, otherwise access to max9286_asd->source will go to
unallocated memory.

Fixes: 86d37bf31af6 ("media: i2c: max9286: Allocate v4l2_async_subdev dynamically")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: stable@vger.kernel.org # v5.10+
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

floppy: reintroduce O_NDELAY fix

commit 8a0c014cd20516ade9654fc13b51345ec58e7be8 upstream.

This issue was originally fixed in 09954bad4 ("floppy: refactor open()
flags handling").

The fix as a side-effect, however, introduce issue for open(O_ACCMODE)
that is being used for ioctl-only open. I wrote a fix for that, but
instead of it being merged, full revert of 09954bad4 was performed,
re-introducing the O_NDELAY / O_NONBLOCK issue, and it strikes again.

This is a forward-port of the original fix to current codebase; the
original submission had the changelog below:

====
Commit 09954bad4 ("floppy: refactor open() flags handling"), as a
side-effect, causes open(/dev/fdX, O_ACCMODE) to fail. It turns out that
this is being used setfdprm userspace for ioctl-only open().

Reintroduce back the original behavior wrt !(FMODE_READ|FMODE_WRITE)
modes, while still keeping the original O_NDELAY bug fixed.

Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2101221209060.5622@cbobk.fhfr.pm
Cc: stable@vger.kernel.org
Reported-by: Wim Osterholt <wim@djo.tudelft.nl>
Tested-by: Wim Osterholt <wim@djo.tudelft.nl>
Reported-and-tested-by: Kurt Garloff <kurt@garloff.de>
Fixes: 09954bad4 ("floppy: refactor open() flags handling")
Fixes: f2791e7ead ("Revert "floppy: refactor open() flags handling"")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Add Edimax EW-7811UN V2 to device table

commit 7a8d2f1908a59003e55ef8691d09efb7fbc51625 upstream.

The Edimax EW-7811UN V2 uses an RTL8188EU chipset and works with this
driver.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210204085217.9743-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Fix DMA from stack

commit 7c3a0635cd008eaca9a734dc802709ee0b81cac5 upstream.

Stack allocated buffers cannot be used for DMA
on all architectures so allocate hci_packet buffer
using kmalloc.

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com>
Link: https://lore.kernel.org/r/20210211053819.34858-1-ameynarkhede03@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mt7621-dma: mtk-hsdma.c->hsdma-mt7621.c

commit 1f92798cbe7fe923479cff754dd06dd23d352e36 upstream.

Also use KBUILD_MODNAME for module name.

This driver is only used by RALINK MIPS MT7621 SoCs. Tested by building
against that target using OpenWrt with Linux 5.10.10.

Fixes the following error:
error: the following would cause module name conflict:
  drivers/dma/mediatek/mtk-hsdma.ko
  drivers/staging/mt7621-dma/mtk-hsdma.ko

Cc: stable@vger.kernel.org
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Link: https://lore.kernel.org/r/20210130034507.2115280-1-ilya.lipnitskiy@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: agilex: fix phy interface bit shift for gmac1 and gmac2

commit b7ff3a447d100c999d9848353ef8a4046831d893 upstream.

The shift for the phy_intf_sel bit in the system manager for gmac1 and
gmac2 should be 0.

Fixes: 2f804ba7aa9ee ("arm64: dts: agilex: Add SysMgr to Ethernet nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dts64: mt7622: fix slow sd card access

commit dc2e76175417e69c41d927dba75a966399f18354 upstream.

Fix extreme slow speed (200MB takes ~20 min) on writing sdcard on
bananapi-r64 by adding reset-control for mmc1 like it's done for mmc0/emmc.

Fixes: 2c002a3049f7 ("arm64: dts: mt7622: add mmc related device nodes")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210113180919.49523-1-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pstore: Fix typo in compression option name

commit 19d8e9149c27b689c6224f5c84b96a159342195a upstream.

Both pstore_compress() and decompress_record() use a mistyped config
option name ("PSTORE_COMPRESSION" instead of "PSTORE_COMPRESS"). As
a result compression and decompression of pstore records was always
disabled.

Use the correct config option name.

Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Fixes: fd49e03280e5 ("pstore: Fix linking when crypto API disabled")
Acked-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210218111547.johvp5klpv3xrpnn@dwarf.suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue

commit 2fd10bcf0310b9525b2af9e1f7aa9ddd87c3772e upstream.

syzbot found WARNING in qp_broker_alloc[1] in qp_host_alloc_queue()
when num_pages is 0x100001, giving queue_size + queue_page_size
bigger than KMALLOC_MAX_SIZE for kzalloc(), resulting order >= MAX_ORDER
condition.

queue_size + queue_page_size=0x8000d8, where KMALLOC_MAX_SIZE=0x400000.

[1]
Call Trace:
 alloc_pages include/linux/gfp.h:547 [inline]
 kmalloc_order+0x40/0x130 mm/slab_common.c:837
 kmalloc_order_trace+0x15/0x70 mm/slab_common.c:853
 kmalloc_large include/linux/slab.h:481 [inline]
 __kmalloc+0x257/0x330 mm/slub.c:3959
 kmalloc include/linux/slab.h:557 [inline]
 kzalloc include/linux/slab.h:682 [inline]
 qp_host_alloc_queue drivers/misc/vmw_vmci/vmci_queue_pair.c:540 [inline]
 qp_broker_create drivers/misc/vmw_vmci/vmci_queue_pair.c:1351 [inline]
 qp_broker_alloc+0x936/0x2740 drivers/misc/vmw_vmci/vmci_queue_pair.c:1739

Reported-by: syzbot+15ec7391f3d6a1a7cc7d@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Link: https://lore.kernel.org/r/20210209102612.2112247-1-snovitoll@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: rtsx: init of rts522a add OCP power off when no card is present

commit 920fd8a70619074eac7687352c8f1c6f3c2a64a5 upstream.

Power down OCP for power consumption
when no SD/MMC card is present

Cc: stable@vger.kernel.org
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20210204083115.9471-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: ptrace: Fix seccomp of traced syscall -1 (NO_SYSCALL)

commit df84fe94708985cdfb78a83148322bcd0a699472 upstream.

Since commit f086f67485c5 ("arm64: ptrace: add support for syscall
emulation"), if system call number -1 is called and the process is being
traced with PTRACE_SYSCALL, for example by strace, the seccomp check is
skipped and -ENOSYS is returned unconditionally (unless altered by the
tracer) rather than carrying out action specified in the seccomp filter.

The consequence of this is that it is not possible to reliably strace
a seccomp based implementation of a foreign system call interface in
which r7/x8 is permitted to be -1 on entry to a system call.

Also trace_sys_enter and audit_syscall_entry are skipped if a system
call is skipped.

Fix by removing the in_syscall(regs) check restoring the previous
behaviour which is like AArch32, x86 (which uses generic code) and
everything else.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Catalin Marinas<catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Fixes: f086f67485c5 ("arm64: ptrace: add support for syscall emulation")
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Timothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Link: https://lore.kernel.org/r/90edd33b-6353-1228-791f-0336d94d5f8c@majoroak.me.uk
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

seccomp: Add missing return in non-void function

commit 04b38d012556199ba4c31195940160e0c44c64f0 upstream.

We don't actually care about the value, since the kernel will panic
before that; but a value should nonetheless be returned, otherwise the
compiler will complain.

Fixes: 8112c4f140fa ("seccomp: remove 2-phase API")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210111172839.640914-1-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: samsung: exynos-asv: handle reading revision register error

commit 4561560dfb4f847a0b327d48bdd1f45bf1b6261f upstream.

If regmap_read() fails, the product_id local variable will contain
random value from the stack.  Do not try to parse such value and fail
the ASV driver probe.

Fixes: 5ea428595cc5 ("soc: samsung: Add Exynos Adaptive Supply Voltage driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Link: https://lore.kernel.org/r/20201207190517.262051-3-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: samsung: exynos-asv: don't defer early on not-supported SoCs

commit 0458b88267c637fb872b0359da9ff0b243081e9e upstream.

Check if the SoC is really supported before gathering the needed
resources. This fixes endless deferred probe on some SoCs other than
Exynos5422 (like Exynos5410).

Fixes: 5ea428595cc5 ("soc: samsung: Add Exynos Adaptive Supply Voltage driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Link: https://lore.kernel.org/r/20201207190517.262051-2-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: sun4i-ss - initialize need_fallback

commit 4ec8977b921fd9d512701e009ce8082cb94b5c1c upstream.

The need_fallback is never initialized and seem to be always true at runtime.
So all hardware operations are always bypassed.

Fixes: 0ae1f46c55f87 ("crypto: sun4i-ss - fallback when length is not multiple of blocksize")
Cc: <stable@vger.kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: sun4i-ss - handle BigEndian for cipher

commit 5ab6177fa02df15cd8a02a1f1fb361d2d5d8b946 upstream.

Ciphers produce invalid results on BE.
Key and IV need to be written in LE.

Fixes: 6298e948215f2 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Cc: <stable@vger.kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: sun4i-ss - IV register does not work on A10 and A13

commit b756f1c8fc9d84e3f546d7ffe056c5352f4aab05 upstream.

Allwinner A10 and A13 SoC have a version of the SS which produce
invalid IV in IVx register.

Instead of adding a variant for those, let's convert SS to produce IV
directly from data.
Fixes: 6298e948215f2 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Cc: <stable@vger.kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: sun4i-ss - checking sg length is not sufficient

commit 7bdcd851fa7eb66e8922aa7f6cba9e2f2427a7cf upstream.

The optimized cipher function need length multiple of 4 bytes.
But it get sometimes odd length.
This is due to SG data could be stored with an offset.

So the fix is to check also if the offset is aligned with 4 bytes.
Fixes: 6298e948215f2 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Cc: <stable@vger.kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: michael_mic - fix broken misalignment handling

commit e1b2d980f03b833442768c1987d5ad0b9a58cfe7 upstream.

The Michael MIC driver uses the cra_alignmask to ensure that pointers
presented to its update and finup/final methods are 32-bit aligned.
However, due to the way the shash API works, this is no guarantee that
the 32-bit reads occurring in the update method are also aligned, as the
size of the buffer presented to update may be of uneven length. For
instance, an update() of 3 bytes followed by a misaligned update() of 4
or more bytes will result in a misaligned access using an accessor that
is not suitable for this.

On most architectures, this does not matter, and so setting the
cra_alignmask is pointless. On architectures where this does matter,
setting the cra_alignmask does not actually solve the problem.

So let's get rid of the cra_alignmask, and use unaligned accessors
instead, where appropriate.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: aesni - prevent misaligned buffers on the stack

commit a13ed1d15b07a04b1f74b2df61ff7a5e47f45dd8 upstream.

The GCM mode driver uses 16 byte aligned buffers on the stack to pass
the IV to the asm helpers, but unfortunately, the x86 port does not
guarantee that the stack pointer is 16 byte aligned upon entry in the
first place. Since the compiler is not aware of this, it will not emit
the additional stack realignment sequence that is needed, and so the
alignment is not guaranteed to be more than 8 bytes.

So instead, allocate some padding on the stack, and realign the IV
pointer by hand.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: arm64/sha - add missing module aliases

commit 0df07d8117c3576f1603b05b84089742a118d10a upstream.

The accelerated, instruction based implementations of SHA1, SHA2 and
SHA3 are autoloaded based on CPU capabilities, given that the code is
modest in size, and widely used, which means that resolving the algo
name, loading all compatible modules and picking the one with the
highest priority is taken to be suboptimal.

However, if these algorithms are requested before this CPU feature
based matching and autoloading occurs, these modules are not even
considered, and we end up with suboptimal performance.

So add the missing module aliases for the various SHA implementations.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gt: Correct surface base address for renderclear

commit 81ce8f04aa96f7f6cae05770f68b5d15be91f5a2 upstream.

The surface_state_base is an offset into the batch, so we need to pass
the correct batch address for STATE_BASE_ADDRESS.

Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20210210122728.20097-1-chris@chris-wilson.co.uk
(cherry picked from commit 1914911f4aa08ddc05bae71d3516419463e0c567)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gt: Flush before changing register state

commit d5109f739c9f14a3bda249cb48b16de1065932f0 upstream.

Flush; invalidate; change registers; invalidate; flush.

Will this finally work on every device? Or will Baytrail complain again?

On the positive side, we immediately see the benefit of having hsw-gt1 in
CI.

Fixes: ace44e13e577 ("drm/i915/gt: Clear CACHE_MODE prior to clearing residuals")
Testcase: igt/gem_render_tiled_blits # hsw-gt1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125220247.31701-1-chris@chris-wilson.co.uk
(cherry picked from commit d30bbd62b1bfd9e0a33c3583c5a9e5d66f60cbd7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Diego Calleja <diegocg@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix extent buffer leak on failure to copy root

commit 72c9925f87c8b74f36f8e75a4cd93d964538d3ca upstream.

At btrfs_copy_root(), if the call to btrfs_inc_ref() fails we end up
returning without unlocking and releasing our reference on the extent
buffer named "cow" we previously allocated with btrfs_alloc_tree_block().

So fix that by unlocking the extent buffer and dropping our reference on
it before returning.

Fixes: be20aa9dbadc8c ("Btrfs: Add mount option to turn off data cow")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: account for new extents being deleted in total_bytes_pinned

commit 81e75ac74ecba929d1e922bf93f9fc467232e39f upstream.

My recent patch set "A variety of lock contention fixes", found here

https://lore.kernel.org/linux-btrfs/cover.1608319304.git.josef@toxicpanda.com/
(Tracked in https://github.com/btrfs/linux/issues/86)

that reduce lock contention on the extent root by running delayed refs
less often resulted in a regression in generic/371.  This test
fallocate()'s the fs until it's full, deletes all the files, and then
tries to fallocate() until full again.

Before these patches we would run all of the delayed refs during
flushing, and then would commit the transaction because we had plenty of
pinned space to recover in order to allocate.  However my patches made
it so we weren't running the delayed refs as aggressively, which meant
that we appeared to have less pinned space when we were deciding to
commit the transaction.

We use the space_info->total_bytes_pinned to approximate how much space
we have pinned.  It's approximate because if we remove a reference to an
extent we may free it, but there may be more references to it than we
know of at that point, but we account it as pinned at the creation time,
and then it's properly accounted when the delayed ref runs.

The way we account for pinned space is if the
delayed_ref_head->total_ref_mod is < 0, because that is clearly a
freeing option.  However there is another case, and that is where
->total_ref_mod == 0 && ->must_insert_reserved == 1.

When we allocate a new extent, we have ->total_ref_mod == 1 and we have
->must_insert_reserved == 1.  This is used to indicate that it is a
brand new extent and will need to have its extent entry added before we
modify any references on the delayed ref head.  But if we subsequently
remove that extent reference, our ->total_ref_mod will be 0, and that
space will be pinned and freed.  Accounting for this case properly
allows for generic/371 to pass with my delayed refs patches applied.

It's important to note that this problem exists without the referenced
patches, it just was uncovered by them.

CC: stable@vger.kernel.org # 5.10
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: handle space_info::total_bytes_pinned inside the delayed ref itself

commit 2187374f35fe9cadbddaa9fcf0c4121365d914e8 upstream.

Currently we pass things around to figure out if we maybe freeing data
based on the state of the delayed refs head.  This makes the accounting
sort of confusing and hard to follow, as it's distinctly separate from
the delayed ref heads stuff, but also depends on it entirely.

Fix this by explicitly adjusting the space_info->total_bytes_pinned in
the delayed refs code.  We now have two places where we modify this
counter, once where we create the delayed and destroy the delayed refs,
and once when we pin and unpin the extents.  This means there is a
slight overlap between delayed refs and the pin/unpin mechanisms, but
this is simply used by the ENOSPC infrastructure to determine if we need
to commit the transaction, so there's no adverse affect from this, we
might simply commit thinking it will give us enough space when it might
not.

CC: stable@vger.kernel.org # 5.10
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: splice remaining dirty_bg's onto the transaction dirty bg list

commit 938fcbfb0cbcf532a1869efab58e6009446b1ced upstream.

While doing error injection testing with my relocation patches I hit the
following assert:

  assertion failed: list_empty(&block_group->dirty_list), in fs/btrfs/block-group.c:3356
  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/ctree.h:3357!
  invalid opcode: 0000 [#1] SMP NOPTI
  CPU: 0 PID: 24351 Comm: umount Tainted: G        W         5.10.0-rc3+ #193
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  RIP: 0010:assertfail.constprop.0+0x18/0x1a
  RSP: 0018:ffffa09b019c7e00 EFLAGS: 00010282
  RAX: 0000000000000056 RBX: ffff8f6492c18000 RCX: 0000000000000000
  RDX: ffff8f64fbc27c60 RSI: ffff8f64fbc19050 RDI: ffff8f64fbc19050
  RBP: ffff8f6483bbdc00 R08: 0000000000000000 R09: 0000000000000000
  R10: ffffa09b019c7c38 R11: ffffffff85d70928 R12: ffff8f6492c18100
  R13: ffff8f6492c18148 R14: ffff8f6483bbdd70 R15: dead000000000100
  FS:  00007fbfda4cdc40(0000) GS:ffff8f64fbc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fbfda666fd0 CR3: 000000013cf66002 CR4: 0000000000370ef0
  Call Trace:
   btrfs_free_block_groups.cold+0x55/0x55
   close_ctree+0x2c5/0x306
   ? fsnotify_destroy_marks+0x14/0x100
   generic_shutdown_super+0x6c/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20
   deactivate_locked_super+0x36/0xa0
   cleanup_mnt+0x12d/0x190
   task_work_run+0x5c/0xa0
   exit_to_user_mode_prepare+0x1b1/0x1d0
   syscall_exit_to_user_mode+0x54/0x280
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This happened because I injected an error in btrfs_cow_block() while
running the dirty block groups.  When we run the dirty block groups, we
splice the list onto a local list to process.  However if an error
occurs, we only cleanup the transactions dirty block group list, not any
pending block groups we have on our locally spliced list.

In fact if we fail to allocate a path in this function we'll also fail
to clean up the splice list.

Fix this by splicing the list back onto the transaction dirty block
group list so that the block groups are cleaned up.  Then add a 'out'
label and have the error conditions jump to out so that the errors are
handled properly.  This also has the side-effect of fixing a problem
where we would clear 'ret' on error because we unconditionally ran
btrfs_run_delayed_refs().

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix reloc root leak with 0 ref reloc roots on recovery

commit c78a10aebb275c38d0cfccae129a803fe622e305 upstream.

When recovering a relocation, if we run into a reloc root that has 0
refs we simply add it to the reloc_control->reloc_roots list, and then
clean it up later.  The problem with this is __del_reloc_root() doesn't
do anything if the root isn't in the radix tree, which in this case it
won't be because we never call __add_reloc_root() on the reloc_root.

This exit condition simply isn't correct really.  During normal
operation we can remove ourselves from the rb tree and then we're meant
to clean up later at merge_reloc_roots() time, and this happens
correctly.  During recovery we're depending on free_reloc_roots() to
drop our references, but we're short-circuiting.

Fix this by continuing to check if we're on the list and dropping
ourselves from the reloc_control root list and dropping our reference
appropriately.  Change the corresponding BUG_ON() to an ASSERT() that
does the correct thing if we aren't in the rb tree.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: abort the transaction if we fail to inc ref in btrfs_copy_root

commit 867ed321f90d06aaba84e2c91de51cd3038825ef upstream.

While testing my error handling patches, I added a error injection site
at btrfs_inc_extent_ref, to validate the error handling I added was
doing the correct thing.  However I hit a pretty ugly corruption while
doing this check, with the following error injection stack trace:

btrfs_inc_extent_ref
  btrfs_copy_root
    create_reloc_root
      btrfs_init_reloc_root
btrfs_record_root_in_trans
  btrfs_start_transaction
    btrfs_update_inode
      btrfs_update_time
touch_atime
  file_accessed
    btrfs_file_mmap

This is because we do not catch the error from btrfs_inc_extent_ref,
which in practice would be ENOMEM, which means we lose the extent
references for a root that has already been allocated and inserted,
which is the problem.  Fix this by aborting the transaction if we fail
to do the reference modification.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: add asserts for deleting backref cache nodes

commit eddda68d97732ce05ca145f8e85e8a447f65cdad upstream.

A weird KASAN problem that Zygo reported could have been easily caught
if we checked for basic things in our backref freeing code.  We have two
methods of freeing a backref node

- btrfs_backref_free_node: this just is kfree() essentially.
- btrfs_backref_drop_node: this actually unlinks the node and cleans up
  everything and then calls btrfs_backref_free_node().

We should mostly be using btrfs_backref_drop_node(), to make sure the
node is properly unlinked from the backref cache, and only use
btrfs_backref_free_node() when we know the node isn't actually linked to
the backref cache.  We made a mistake here and thus got the KASAN splat.

Make this style of issue easier to find by adding some ASSERT()'s to
btrfs_backref_free_node() and adjusting our deletion stuff to properly
init the list so we can rely on list_empty() checks working properly.

  BUG: KASAN: use-after-free in btrfs_backref_cleanup_node+0x18a/0x420
  Read of size 8 at addr ffff888112402950 by task btrfs/28836

  CPU: 0 PID: 28836 Comm: btrfs Tainted: G        W         5.10.0-e35f27394290-for-next+ #23
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  Call Trace:
   dump_stack+0xbc/0xf9
   ? btrfs_backref_cleanup_node+0x18a/0x420
   print_address_description.constprop.8+0x21/0x210
   ? record_print_text.cold.34+0x11/0x11
   ? btrfs_backref_cleanup_node+0x18a/0x420
   ? btrfs_backref_cleanup_node+0x18a/0x420
   kasan_report.cold.10+0x20/0x37
   ? btrfs_backref_cleanup_node+0x18a/0x420
   __asan_load8+0x69/0x90
   btrfs_backref_cleanup_node+0x18a/0x420
   btrfs_backref_release_cache+0x83/0x1b0
   relocate_block_group+0x394/0x780
   ? merge_reloc_roots+0x4a0/0x4a0
   btrfs_relocate_block_group+0x26e/0x4c0
   btrfs_relocate_chunk+0x52/0x120
   btrfs_balance+0xe2e/0x1900
   ? check_flags.part.50+0x6c/0x1e0
   ? btrfs_relocate_chunk+0x120/0x120
   ? kmem_cache_alloc_trace+0xa06/0xcb0
   ? _copy_from_user+0x83/0xc0
   btrfs_ioctl_balance+0x3a7/0x460
   btrfs_ioctl+0x24c8/0x4360
   ? __kasan_check_read+0x11/0x20
   ? check_chain_key+0x1f4/0x2f0
   ? __asan_loadN+0xf/0x20
   ? btrfs_ioctl_get_supported_features+0x30/0x30
   ? kvm_sched_clock_read+0x18/0x30
   ? check_chain_key+0x1f4/0x2f0
   ? lock_downgrade+0x3f0/0x3f0
   ? handle_mm_fault+0xad6/0x2150
   ? do_vfs_ioctl+0xfc/0x9d0
   ? ioctl_file_clone+0xe0/0xe0
   ? check_flags.part.50+0x6c/0x1e0
   ? check_flags.part.50+0x6c/0x1e0
   ? check_flags+0x26/0x30
   ? lock_is_held_type+0xc3/0xf0
   ? syscall_enter_from_user_mode+0x1b/0x60
   ? do_syscall_64+0x13/0x80
   ? rcu_read_lock_sched_held+0xa1/0xd0
   ? __kasan_check_read+0x11/0x20
   ? __fget_light+0xae/0x110
   __x64_sys_ioctl+0xc3/0x100
   do_syscall_64+0x37/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f4c4bdfe427
  RSP: 002b:00007fff33ee6df8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 00007fff33ee6e98 RCX: 00007f4c4bdfe427
  RDX: 00007fff33ee6e98 RSI: 00000000c4009420 RDI: 0000000000000003
  RBP: 0000000000000003 R08: 0000000000000003 R09: 0000000000000078
  R10: fffffffffffff59d R11: 0000000000000202 R12: 0000000000000001
  R13: 0000000000000000 R14: 00007fff33ee8a34 R15: 0000000000000001

  Allocated by task 28836:
   kasan_save_stack+0x21/0x50
   __kasan_kmalloc.constprop.18+0xbe/0xd0
   kasan_kmalloc+0x9/0x10
   kmem_cache_alloc_trace+0x410/0xcb0
   btrfs_backref_alloc_node+0x46/0xf0
   btrfs_backref_add_tree_node+0x60d/0x11d0
   build_backref_tree+0xc5/0x700
   relocate_tree_blocks+0x2be/0xb90
   relocate_block_group+0x2eb/0x780
   btrfs_relocate_block_group+0x26e/0x4c0
   btrfs_relocate_chunk+0x52/0x120
   btrfs_balance+0xe2e/0x1900
   btrfs_ioctl_balance+0x3a7/0x460
   btrfs_ioctl+0x24c8/0x4360
   __x64_sys_ioctl+0xc3/0x100
   do_syscall_64+0x37/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Freed by task 28836:
   kasan_save_stack+0x21/0x50
   kasan_set_track+0x20/0x30
   kasan_set_free_info+0x1f/0x30
   __kasan_slab_free+0xf3/0x140
   kasan_slab_free+0xe/0x10
   kfree+0xde/0x200
   btrfs_backref_error_cleanup+0x452/0x530
   build_backref_tree+0x1a5/0x700
   relocate_tree_blocks+0x2be/0xb90
   relocate_block_group+0x2eb/0x780
   btrfs_relocate_block_group+0x26e/0x4c0
   btrfs_relocate_chunk+0x52/0x120
   btrfs_balance+0xe2e/0x1900
   btrfs_ioctl_balance+0x3a7/0x460
   btrfs_ioctl+0x24c8/0x4360
   __x64_sys_ioctl+0xc3/0x100
   do_syscall_64+0x37/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

  The buggy address belongs to the object at ffff888112402900
   which belongs to the cache kmalloc-128 of size 128
  The buggy address is located 80 bytes inside of
   128-byte region [ffff888112402900, ffff888112402980)
  The buggy address belongs to the page:
  page:0000000028b1cd08 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888131c810c0 pfn:0x112402
  flags: 0x17ffe0000000200(slab)
  raw: 017ffe0000000200 ffffea000424f308 ffffea0007d572c8 ffff888100040440
  raw: ffff888131c810c0 ffff888112402000 0000000100000009 0000000000000000
  page dumped because: kasan: bad access detected

  Memory state around the buggy address:
   ffff888112402800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
   ffff888112402880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  >ffff888112402900: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                   ^
   ffff888112402980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
   ffff888112402a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Link: https://lore.kernel.org/linux-btrfs/20201208194607.GI31381@hungrycats.org/
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: do not warn if we can't find the reloc root when looking up backref

commit f78743fbdae1bb31bc9c9233c3590a5048782381 upstream.

The backref code is looking for a reloc_root that corresponds to the
given fs root.  However any number of things could have gone wrong while
initializing that reloc_root, like ENOMEM while trying to allocate the
root itself, or EIO while trying to write the root item.  This would
result in no corresponding reloc_root being in the reloc root cache, and
thus would return NULL when we do the find_reloc_root() call.

Because of this we do not want to WARN_ON().  This presumably was meant
to catch developer errors, cases where we messed up adding the reloc
root.  However we can easily hit this case with error injection, and
thus should not do a WARN_ON().

CC: stable@vger.kernel.org # 5.10+
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: do not cleanup upper nodes in btrfs_backref_cleanup_node

commit 7e2a870a599d4699a626ec26430c7a1ab14a2a49 upstream.

Zygo reported the following panic when testing my error handling patches
for relocation:

  kernel BUG at fs/btrfs/backref.c:2545!
  invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 3 PID: 8472 Comm: btrfs Tainted: G        W 14
  Hardware name: QEMU Standard PC (i440FX + PIIX,

  Call Trace:
   btrfs_backref_error_cleanup+0x4df/0x530
   build_backref_tree+0x1a5/0x700
   ? _raw_spin_unlock+0x22/0x30
   ? release_extent_buffer+0x225/0x280
   ? free_extent_buffer.part.52+0xd7/0x140
   relocate_tree_blocks+0x2a6/0xb60
   ? kasan_unpoison_shadow+0x35/0x50
   ? do_relocation+0xc10/0xc10
   ? kasan_kmalloc+0x9/0x10
   ? kmem_cache_alloc_trace+0x6a3/0xcb0
   ? free_extent_buffer.part.52+0xd7/0x140
   ? rb_insert_color+0x342/0x360
   ? add_tree_block.isra.36+0x236/0x2b0
   relocate_block_group+0x2eb/0x780
   ? merge_reloc_roots+0x470/0x470
   btrfs_relocate_block_group+0x26e/0x4c0
   btrfs_relocate_chunk+0x52/0x120
   btrfs_balance+0xe2e/0x18f0
   ? pvclock_clocksource_read+0xeb/0x190
   ? btrfs_relocate_chunk+0x120/0x120
   ? lock_contended+0x620/0x6e0
   ? do_raw_spin_lock+0x1e0/0x1e0
   ? do_raw_spin_unlock+0xa8/0x140
   btrfs_ioctl_balance+0x1f9/0x460
   btrfs_ioctl+0x24c8/0x4380
   ? __kasan_check_read+0x11/0x20
   ? check_chain_key+0x1f4/0x2f0
   ? __asan_loadN+0xf/0x20
   ? btrfs_ioctl_get_supported_features+0x30/0x30
   ? kvm_sched_clock_read+0x18/0x30
   ? check_chain_key+0x1f4/0x2f0
   ? lock_downgrade+0x3f0/0x3f0
   ? handle_mm_fault+0xad6/0x2150
   ? do_vfs_ioctl+0xfc/0x9d0
   ? ioctl_file_clone+0xe0/0xe0
   ? check_flags.part.50+0x6c/0x1e0
   ? check_flags.part.50+0x6c/0x1e0
   ? check_flags+0x26/0x30
   ? lock_is_held_type+0xc3/0xf0
   ? syscall_enter_from_user_mode+0x1b/0x60
   ? do_syscall_64+0x13/0x80
   ? rcu_read_lock_sched_held+0xa1/0xd0
   ? __kasan_check_read+0x11/0x20
   ? __fget_light+0xae/0x110
   __x64_sys_ioctl+0xc3/0x100
   do_syscall_64+0x37/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This occurs because of this check

  if (RB_EMPTY_NODE(&upper->rb_node))
  BUG_ON(!list_empty(&node->upper));

As we are dropping the backref node, if we discover that our upper node
in the edge we just cleaned up isn't linked into the cache that we are
now done with this node, thus the BUG_ON().

However this is an erroneous assumption, as we will look up all the
references for a node first, and then process the pending edges.  All of
the 'upper' nodes in our pending edges won't be in the cache's rb_tree
yet, because they haven't been processed.  We could very well have many
edges still left to cleanup on this node.

The fact is we simply do not need this check, we can just process all of
the edges only for this node, because below this check we do the
following

  if (list_empty(&upper->lower)) {
  list_add_tail(&upper->lower, &cache->leaves);
  upper->lowest = 1;
  }

If the upper node truly isn't used yet, then we add it to the
cache->leaves list to be cleaned up later.  If it is still used then the
last child node that has it linked into its node will add it to the
leaves list and then it will be cleaned up.

Fix this problem by dropping this logic altogether.  With this fix I no
longer see the panic when testing with error injection in the backref
code.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: trusted: Reserve TPM for seal and unseal operations

commit 8c657a0590de585b1115847c17b34a58025f2f4b upstream.

When TPM 2.0 trusted keys code was moved to the trusted keys subsystem,
the operations were unwrapped from tpm_try_get_ops() and tpm_put_ops(),
which are used to take temporarily the ownership of the TPM chip. The
ownership is only taken inside tpm_send(), but this is not sufficient,
as in the key load TPM2_CC_LOAD, TPM2_CC_UNSEAL and TPM2_FLUSH_CONTEXT
need to be done as a one single atom.

Take the TPM chip ownership before sending anything with
tpm_try_get_ops() and tpm_put_ops(), and use tpm_transmit_cmd() to send
TPM commands instead of tpm_send(), reverting back to the old behaviour.

Fixes: 2e19e10131a0 ("KEYS: trusted: Move TPM2 trusted keys code")
Reported-by: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Acked-by Sumit Garg <sumit.garg@linaro.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: trusted: Fix migratable=1 failing

commit 8da7520c80468c48f981f0b81fc1be6599e3b0ad upstream.

Consider the following transcript:

$ keyctl add trusted kmk "new 32 blobauth=helloworld keyhandle=80000000 migratable=1" @u
add_key: Invalid argument

The documentation has the following description:

  migratable=   0|1 indicating permission to reseal to new PCR values,
                default 1 (resealing allowed)

The consequence is that "migratable=1" should succeed. Fix this by
allowing this condition to pass instead of return -EINVAL.

[*] Documentation/security/keys/trusted-encrypted.rst

Cc: stable@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Fixes: d00a1c72f7f4 ("keys: add new trusted key-type")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: trusted: Fix incorrect handling of tpm_get_random()

commit 5df16caada3fba3b21cb09b85cdedf99507f4ec1 upstream.

When tpm_get_random() was introduced, it defined the following API for the
return value:

1. A positive value tells how many bytes of random data was generated.
2. A negative value on error.

However, in the call sites the API was used incorrectly, i.e. as it would
only return negative values and otherwise zero. Returning he positive read
counts to the user space does not make any possible sense.

Fix this by returning -EIO when tpm_get_random() returns a positive value.

Fixes: 41ab999c80f1 ("tpm: Move tpm_get_random api into the TPM device driver")
Cc: stable@vger.kernel.org
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm_tis: Clean up locality release

commit e42acf104d6e0bd7ccd2f09103d5be5e6d3c637c upstream.

The current release locality code seems to be based on the
misunderstanding that the TPM interrupts when a locality is released:
it doesn't, only when the locality is acquired.

Furthermore, there seems to be no point in waiting for the locality to
be released.  All it does is penalize the last TPM user.  However, if
there's no next TPM user, this is a pointless wait and if there is a
next TPM user, they'll pay the penalty waiting for the new locality
(or possibly not if it's the same as the old locality).

Fix the code by making release_locality as simple write to release
with no waiting for completion.

Cc: stable@ger.kernel.org
Fixes: 33bafe90824b ("tpm_tis: verify locality released before returning from release_locality")
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm_tis: Fix check_locality for correct locality acquisition

commit 3d9ae54af1d02a7c0edc55c77d7df2b921e58a87 upstream.

The TPM TIS specification says the TPM signals the acquisition of locality
when the TMP_ACCESS_REQUEST_USE bit goes to one *and* the
TPM_ACCESS_REQUEST_USE bit goes to zero.  Currently we only check the
former not the latter, so check both.  Adding the check on
TPM_ACCESS_REQUEST_USE should fix the case where the locality is
re-requested before the TPM has released it.  In this case the locality may
get released briefly before it is reacquired, which causes all sorts of
problems. However, with the added check, TPM_ACCESS_REQUEST_USE should
remain 1 until the second request for the locality is granted.

Cc: stable@ger.kernel.org
Fixes: 27084efee0c3 ("[PATCH] tpm: driver for next generation TPM chips")
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

erofs: initialized fields can only be observed after bit is set

commit ce063129181312f8781a047a50be439c5859747b upstream.

Currently, although set_bit() & test_bit() pairs are used as a fast-
path for initialized configurations. However, these atomic ops are
actually relaxed forms. Instead, load-acquire & store-release form is
needed to make sure uninitialized fields won't be observed in advance
here (yet no such corresponding bitops so use full barriers instead.)

Link: https://lore.kernel.org/r/20210209130618.15838-1-hsiangkao@aol.com
Fixes: 62dc45979f3f ("staging: erofs: fix race of initializing xattrs of a inode at the same time")
Fixes: 152a333a5895 ("staging: erofs: add compacted compression indexes support")
Cc: <stable@vger.kernel.org> # 5.3+
Reported-by: Huang Jianan <huangjianan@oppo.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: fix inconsistency between inode_getxattr and inode_listsecurity

commit a9ffe682c58aaff643764547f5420e978b6e0830 upstream.

When inode has no listxattr op of its own (e.g. squashfs) vfs_listxattr
calls the LSM inode_listsecurity hooks to list the xattrs that LSMs will
intercept in inode_getxattr hooks.

When selinux LSM is installed but not initialized, it will list the
security.selinux xattr in inode_listsecurity, but will not intercept it
in inode_getxattr.  This results in -ENODATA for a getxattr call for an
xattr returned by listxattr.

This situation was manifested as overlayfs failure to copy up lower
files from squashfs when selinux is built-in but not initialized,
because ovl_copy_xattr() iterates the lower inode xattrs by
vfs_listxattr() and vfs_getxattr().

Match the logic of inode_listsecurity to that of inode_getxattr and
do not list the security.selinux xattr if selinux is not initialized.

Reported-by: Michael Labriola <michael.d.labriola@gmail.com>
Tested-by: Michael Labriola <michael.d.labriola@gmail.com>
Link: https://lore.kernel.org/linux-unionfs/2nv9d47zt7.fsf@aldarion.sourceruckus.org/
Fixes: c8e222616c7e ("selinux: allow reading labels before policy is loaded")
Cc: stable@vger.kernel.org#v5.9+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: siu: Fix build error by a wrong const prefix

commit ae07f5c7c5e9ebca5b9d6471bb4b99a9da5c6d88 upstream.

A const prefix was put wrongly in the middle at the code refactoring
commit 932eaf7c7904 ("ASoC: sh: siu_pcm: remove snd_pcm_ops"), which
leads to a build error as:
  sound/soc/sh/siu_pcm.c:546:8: error: expected '{' before 'const'

Also, another inconsistency is that the declaration of siu_component
misses the const prefix.

This patch corrects both failures.

Fixes: 932eaf7c7904 ("ASoC: sh: siu_pcm: remove snd_pcm_ops")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20210126154702.3974-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/rockchip: Require the YTR modifier for AFBC

commit 5f94e3571459abb626077aedb65d71264c2a58c0 upstream.

The AFBC decoder used in the Rockchip VOP assumes the use of the
YUV-like colourspace transform (YTR). YTR is lossless for RGB(A)
buffers, which covers the RGBA8 and RGB565 formats supported in
vop_convert_afbc_format. Use of YTR is signaled with the
AFBC_FORMAT_MOD_YTR modifier, which prior to this commit was missing. As
such, a producer would have to generate buffers that do not use YTR,
which the VOP would erroneously decode as YTR, leading to severe visual
corruption.

The upstream AFBC support was developed against a captured frame, which
failed to exercise modifier support. Prior to bring-up of AFBC in Mesa
(in the Panfrost driver), no open userspace respected modifier
reporting. As such, this change is not expected to affect broken
userspaces.

Tested on RK3399 with Panfrost and Weston.

Fixes: 7707f7227f09 ("drm/rockchip: Add support for afbc")
Cc: stable@vger.kernel.org
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811202631.3603-1-alyssa.rosenzweig@collabora.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>