Arnd Bergmann [Tue, 9 Feb 2021 16:56:57 +0000 (17:56 +0100)]
Merge tag 'qcom-dts-for-5.12' of git://git./linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM dts updates for 5.12
Introduces the Qualcomm SDX55 platform and the platform's MTP device,
with support for NAND, SDHCI and USB.
USB is enabled for IPQ4019 and the Alfa Network AP120C-AC and 8devices
Jalapeno boards are added.
Samsung Galaxy S5 gains display and GPU support.
* tag 'qcom-dts-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (38 commits)
ARM: dts: qcom: msm8974-klte: Mark essential regulators
ARM: dts: qcom: msm8974-klte: add support for display
ARM: dts: qcom: msm8974-klte: add support for GPU
ARM: dts: qcom: msm8974: add gpu support
ARM: dts: qcom: ipq4019: add SDHCI VQMMC LDO node
ARM: dts: qcom: replace status value "ok" by "okay"
ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsi
ARM: dts: qcom: remove commented mmc-ddr-1_8v for sdcc3
ARM: dts: qcom: add Alfa Network AP120C-AC
ARM: dts: qcom: add 8devices Jalapeno
ARM: dts: qcom: ipq4019: add more labels
ARM: dts: qcom: ipq4019: add USB devicetree nodes
ARM: dts: qcom: add prng definition to ipq806x
ARM: dts: qcom: sdx55: Add pshold support
ARM: dts: qcom: sdx55: Add Watchdog support
dt-bindings: watchdog: Add binding for Qcom SDX55
ARM: dts: qcom: sdx55-mtp: Enable USB3 and PHY support
ARM: dts: qcom: sdx55: Add USB3 and PHY support
dt-bindings: usb: qcom,dwc3: Add binding for SDX55
ARM: dts: qcom: msm8974-klte: Fix shdc numbering
...
Link: https://lore.kernel.org/r/20210204052320.388999-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 9 Feb 2021 16:53:44 +0000 (17:53 +0100)]
Merge tag 'qcom-arm64-for-5.12' of git://git./linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for 5.12
This introduces initial support for the new SM8350 platform, aka
Snapdragon 888, and the MTP device for this.
It adds PCIe, audio, display, GPU, HDMI watchdog, LLCC and PMIC ADC
support to the SM8250 platform and RB5 in particular, as well as improve
the definition of CPUs, thermal zones and fixes a few smaller issues.
It introduces new Devicetree files for the Alcatel Idol 3, ASUS Zenfone
2 Laser and BQ Aquaris X5, based on the MSM8916 platform.
It contains an overhaul of the existing MSM8992 and MSM8994 platform
files and introduces RPM power domains and SMP2P nodes. It adds
touchscreen, additional regulators, microSD card support and adds the
Sony Mobile Ivy, Karin, Suzuran and Satsuki devices. It joins the common
parts of the Lumia 950 and 950XL and extend these with support for
sensors, NFC, bluetooth, audio, microSD and Type-C mux pins.
It introduces support for the OnePlus6 and 6t, adds the missing higher
frequences for the SDM850 laptops, adds CPU cluster idle support on
SM8150 and a few tweaks to the SC7180 platform.
* tag 'qcom-arm64-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (100 commits)
arm64: dts: qcom: msm8998: Use rpmpd definitions for opp table levels
arm64: dts: qcom: msm8996: Add missing device_type under pcie[01]
arm64: dts: qcom: sc7180: Add support for gpu fuse
arm64: dts: qcom: msm8998: Disable some components by default
arm64: dts: qcom: msm8998: Add capacity-dmips-mhz to CPU cores
arm64: dts: qcom: msm8998: Add I2C pinctrl and fix BLSP2_I2C naming
arm64: dts: qcom: msm8998: Add DMA to I2C hosts
arm64: dts: qcom: msm8998: Merge in msm8998-pins.dtsi to msm8998.dtsi
arm64: dts: msm8916: Fix reserved and rfsa nodes unit address
arm64: dts: qcom: msm8994-octagon: Add AD7147 and APDS9930 sensors
arm64: dts: qcom: msm8994-octagon: Add TAS2553 codec
arm64: dts: qcom: msm8994-octagon: Add sensors on blsp1_i2c5
arm64: dts: qcom: msm8994-octagon: Add NXP NFC node
arm64: dts: qcom: msm8994-octagon: Add FM Radio and DDR regulator nodes
arm64: dts: qcom: msm8994-octagon: Configure PON keys
arm64: dts: qcom: msm8994-octagon: Configure Lattice iCE40 FPGA
arm64: dts: qcom: msm8994-octagon: Add uSD card and disable HS400 on eMMC
arm64: dts: qcom: msm8994-octagon: Configure HD3SS460 Type-C mux pins
arm64: dts: qcom: msm8994-octagon: Add QCA6174 bluetooth
arm64: dts: qcom: msm8994-octagon: Configure regulators
...
Link: https://lore.kernel.org/r/20210204052043.388621-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 9 Feb 2021 16:51:18 +0000 (17:51 +0100)]
Merge tag 'amlogic-dt64-1' of git://git./linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: amlogic updates for v5.12
- new board: Hardkernel ODROID-HC4 (SoC: SM1)
- new board: Beelink GS-King-X (SoC: S922X)
- shorten shorten audio card names for alsa compatibility
- misc cleanups & fixes
* tag 'amlogic-dt64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: add initial device-tree for ODROID-HC4
dt-bindings: arm: amlogic: add ODROID-HC4 bindings
arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi
arm64: dts: meson: sort Amlogic dtb Makefile
dt-bindings: arm: amlogic: sort SM1 bindings
arm64: dts: meson: fix broken wifi node for Khadas VIM3L
arm64: dts: meson: add i2c3/rtc nodes and rtc aliases to ODROID-N2 dtsi
ARM: dts: meson: add the AO ARC remote processor
dt-bindings: Amlogic: add the documentation for the SECBUS2 registers
dt-bindings: sram: Add compatible strings for the Meson AO ARC SRAM
arm64: dts: meson: shorten audio card names for alsa compatibility
arm64: dts: meson: add initial Beelink GS-King-X device-tree
dt-bindings: arm: amlogic: add support for the Beelink GS-King-X
arm64: dts: meson: Fix schema warnings for pwm-leds
arm64: dts: meson: vim3: whitespace fixups
arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
Revert "arm64: dts: amlogic: add missing ethernet reset ID"
arm64: dts: amlogic: meson-g12: Set FL-adj property value
Link: https://lore.kernel.org/soc/7heehq7ag3.fsf@baylibre.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 9 Feb 2021 16:48:04 +0000 (17:48 +0100)]
Merge tag 'amlogic-dt' of git://git./linux/kernel/git/khilman/linux-amlogic into arm/dt
ARM: dts: amlogic updates for v5.12
- add thermal zones with cooling configuration
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: add the thermal-zones with cooling configuration
ARM: dts: meson8: add the thermal-zones with cooling configuration
ARM: dts: meson: add the ADC thermal sensor to meson.dtsi
ARM: dts: meson: move iio-hwmon for the SoC temperature to meson.dtsi
Link: https://lore.kernel.org/r/7ho8h12bto.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 9 Feb 2021 16:46:47 +0000 (17:46 +0100)]
Merge tag 'zynqmp-dt-for-v5.12' of https://github.com/Xilinx/linux-xlnx into arm/dt
arm64: dts: ZynqMP DT changes for v5.12
- Wire clock chips present on boards
- Enable reset, qspi, nand, watchdog and DP IPs
- Enable phy driver for sata and DP
- Add iommu description
- Add support for zcu104 revC+ boards
- Various small changes
- Add missing labels
- Fix typos in documentation
- Add missing boards
* tag 'zynqmp-dt-for-v5.12' of https://github.com/Xilinx/linux-xlnx:
arm64: dts: zynqmp: Wire up the DisplayPort subsystem
arm64: dts: zynqmp: Add DisplayPort subsystem
arm64: dts: zynqmp: Add DPDMA node
dt-bindings: arm: Fix typo in zcu111 board
arm64: dts: zynqmp: Add description for zcu104 revC
arm64: dts: zynqmp: Add missing iommu IDs
arm64: dts: zynqmp: Add missing lpd watchdog node
arm64: dts: zynqmp: Wire zynqmp qspi controller
arm64: dts: zynqmp: Wire arasan nand controller
arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis
arm64: dts: zynqmp: Add label for zynqmp_ipi
arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
arm64: dts: zynqmp: Enable reset controller driver
arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106
arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111
arm64: dts: zynqmp: Add address-cells property to interrupt controllers
Link: https://lore.kernel.org/r/b1a6f89e-f6b4-757b-daf0-d2f1844b833d@xilinx.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 9 Feb 2021 16:46:11 +0000 (17:46 +0100)]
Merge tag 'samsung-dt-5.12' of git://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.12
1. Use new compatile to properly configure Exynos5420 USB2 PHY, fixing
it suspend/resume cycle.
2. Correct Samsung PMIC interrupt trigger levels on multiple boards.
3. Correct the voltages of Samsung GT-I9100 charger and add top-off
charger.
* tag 'samsung-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add top-off charging regulator node for I9100
ARM: dts: exynos: Fix charging regulator voltage and current for I9100
ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid XU3 family
ARM: dts: exynos: correct PMIC interrupt trigger level on Arndale Octa
ARM: dts: exynos: correct PMIC interrupt trigger level on Spring
ARM: dts: exynos: correct PMIC interrupt trigger level on Rinato
ARM: dts: exynos: correct PMIC interrupt trigger level on Monk
ARM: dts: exynos: correct PMIC interrupt trigger level on Artik 5
ARM: dts: exynos: use Exynos5420 dedicated USB2 PHY compatible
Link: https://lore.kernel.org/r/20210125191240.11278-3-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Christian Hewitt [Tue, 2 Feb 2021 02:10:21 +0000 (02:10 +0000)]
arm64: dts: meson: add initial device-tree for ODROID-HC4
ODROID-HC4 is a derivative of the C4 with minor differences:
- 16MB XT25F128B SPI-NOR flash
- 2x SATA ports via ASM1061 PCIe to SATA controller
- 7-pin header with SPI and I2C for 1-inch OLED display and RTC
- 1x USB 2.0 host port
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210202021021.11068-6-christianshewitt@gmail.com
Christian Hewitt [Tue, 2 Feb 2021 02:10:20 +0000 (02:10 +0000)]
dt-bindings: arm: amlogic: add ODROID-HC4 bindings
Add the board bindings for the ODROID-HC4 device.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210202021021.11068-5-christianshewitt@gmail.com
Christian Hewitt [Wed, 3 Feb 2021 18:29:23 +0000 (10:29 -0800)]
arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi
Convert the ODROID-C4 dts to meson-sm1-odroid.dtsi and C4 board dts in
preparation for adding additional C4 family boards.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210202021021.11068-4-christianshewitt@gmail.com
Christian Hewitt [Tue, 2 Feb 2021 02:10:18 +0000 (02:10 +0000)]
arm64: dts: meson: sort Amlogic dtb Makefile
Sort the Makefile before adding new SM1 devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210202021021.11068-3-christianshewitt@gmail.com
Christian Hewitt [Tue, 2 Feb 2021 02:10:17 +0000 (02:10 +0000)]
dt-bindings: arm: amlogic: sort SM1 bindings
Sort the bindings before adding new SM1 devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210202021021.11068-2-christianshewitt@gmail.com
Artem Lapkin [Fri, 29 Jan 2021 08:50:40 +0000 (16:50 +0800)]
arm64: dts: meson: fix broken wifi node for Khadas VIM3L
move &sd_emmc_a ... from /* */ commented area, because cant load wifi fw
without sd-uhs-sdr50 option on VIM3L
[ 11.686590] brcmfmac: brcmf_chip_cores_check: CPU core not detected
[ 11.696382] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed!
[ 11.706240] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed
[ 11.715890] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19...
[ 13.718424] brcmfmac: brcmf_chip_recognition: chip backplane type 15 is not supported
Signed-off-by: Artem Lapkin <art@khadas.com>
Fixes:
f1bb924e8f5b ("arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210129085041.1408540-1-art@khadas.com
Christian Hewitt [Mon, 11 Jan 2021 13:58:31 +0000 (13:58 +0000)]
arm64: dts: meson: add i2c3/rtc nodes and rtc aliases to ODROID-N2 dtsi
Enable the onboard pcf8563 rtc hardware on ODROID N2/N2+ boards via the
common dtsi. Also add aliases to ensure vrtc does not claim /dev/rtc0.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210111135831.2218-1-christianshewitt@gmail.com
Martin Blumenstingl [Sat, 2 Jan 2021 20:59:04 +0000 (21:59 +0100)]
ARM: dts: meson: add the AO ARC remote processor
The 32-bit Amlogic Meson SoCs embed an ARC processor in the Always-On
power domain which is typically used for managing system suspend. The
memory for this ARC core is taken from the AHB SRAM area. Depending on
the actual SoC a different ARC core is used:
- Meson6 and earlier: some ARCv1 ISA based core (probably an ARC625)
- Meson8 and later: an ARC EM4 (ARCv2 ISA) based core
Add the device-tree node for this remote-processor along with the
required SRAM sections, clocks and reset-lines. Also use the
SoC-specific compatible string to manage any differences (should
they exist).
On Meson8, Meson8b and Meson8m2 the "secbus2" IO region is needed as
some bits need to be programmed there. Add this IO region for those
SoCs as well.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210102205904.2691120-6-martin.blumenstingl@googlemail.com
Martin Blumenstingl [Sat, 2 Jan 2021 20:59:01 +0000 (21:59 +0100)]
dt-bindings: Amlogic: add the documentation for the SECBUS2 registers
The Meson8/Meson8b/Meson8m2 SoCs have a register bank called SECBUS2 which
contains registers for various IP blocks such as pin-controller bits for
the BSD_EN and TEST_N GPIOs as well as some AO ARC core control bits.
The registers can be accessed directly when not running in "secure mode".
When "secure mode" is enabled then these registers have to be accessed
through secure monitor calls.
So far these SoCs are always known to boot in "non-secure mode".
Add a binding documentation using syscon (as these registers are shared
across different IPs) for the SECBUS2 registers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210102205904.2691120-3-martin.blumenstingl@googlemail.com
Martin Blumenstingl [Sat, 2 Jan 2021 20:59:00 +0000 (21:59 +0100)]
dt-bindings: sram: Add compatible strings for the Meson AO ARC SRAM
Amlogic Meson8, Meson8b and Meson8m2 SoCs embed an ARC EM4 core
typically used for managing system suspend. A section of the SoCs SRAM
is mapped as memory for this ARC core. Add new compatible strings for
the SRAM section for the ARC core memory.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210102205904.2691120-2-martin.blumenstingl@googlemail.com
Christian Hewitt [Fri, 1 Jan 2021 06:37:37 +0000 (06:37 +0000)]
arm64: dts: meson: shorten audio card names for alsa compatibility
This patch shortens all audio card model names by dropping the SoC prefix
(for conformity) and rewording those that are still longer than alsa's 15
character name limit [0] to avoid userspace config issues.
[0] https://github.com/torvalds/linux/blob/master/Documentation/sound/alsa-configuration.rst#common-parameters-for-top-sound-card-modules
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210101063737.26635-1-christianshewitt@gmail.com
Christian Hewitt [Tue, 19 Jan 2021 14:57:34 +0000 (14:57 +0000)]
arm64: dts: meson: add initial Beelink GS-King-X device-tree
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference
board with an S922X-H chip.
- 4GB LPDDR4 RAM
- 64GB eMMC storage
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- HDMI 2.1 video
- S/PDIF optical output
- 2x ESS9018 audio DACs
- 4x Ricor RT6862 audio amps
- Analogue headphone output
- 1x USB 2.0 OTG port
- 3x USB 3.0 ports
- IR receiver
- 1x micro SD card slot (internal)
- USB SATA controller with 2x 3.5" drive bays
- 1x Power on/off button
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210119145734.12675-3-christianshewitt@gmail.com
Christian Hewitt [Tue, 19 Jan 2021 14:57:33 +0000 (14:57 +0000)]
dt-bindings: arm: amlogic: add support for the Beelink GS-King-X
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference
board with an S922X-H chip.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210119145734.12675-2-christianshewitt@gmail.com
Alexander Dahl [Mon, 28 Dec 2020 16:32:17 +0000 (17:32 +0100)]
arm64: dts: meson: Fix schema warnings for pwm-leds
The node names for devices using the pwm-leds driver follow a certain
naming scheme (now). Parent node name is not enforced, but recommended
by DT project.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201228163217.32520-5-post@lespocky.de
Jerome Brunet [Mon, 7 Dec 2020 09:53:45 +0000 (10:53 +0100)]
arm64: dts: meson: vim3: whitespace fixups
Spaces have been used to indent 2 nodes.
Replace those with tabs and remove one extra newline
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201207095346.26297-2-jbrunet@baylibre.com
AngeloGioacchino Del Regno [Sat, 9 Jan 2021 16:07:59 +0000 (17:07 +0100)]
arm64: dts: qcom: msm8998: Use rpmpd definitions for opp table levels
The dt-bindings/power/qcom-rpmpd.h header is being included in this
DT but the RPMPD OPP table declarations were using open-coded values:
use the definitions found in the aforementioned header.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109160759.186990-1-angelogioacchino.delregno@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Konrad Dybcio [Thu, 24 Dec 2020 12:00:25 +0000 (13:00 +0100)]
arm64: dts: qcom: msm8996: Add missing device_type under pcie[01]
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20201224120025.6282-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Akhil P Oommen [Fri, 8 Jan 2021 18:15:31 +0000 (23:45 +0530)]
arm64: dts: qcom: sc7180: Add support for gpu fuse
Add support for gpu fuse to help identify the supported opps.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/1610129731-4875-2-git-send-email-akhilpo@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Konrad Dybcio [Sat, 9 Jan 2021 16:29:59 +0000 (17:29 +0100)]
arm64: dts: qcom: msm8998: Disable some components by default
Some components (like PCIe) are not used on all devices and
with a certain firmware configuration they might end up triggering
a force reboot or a Synchronous Abort.
This commit brings no functional difference as the nodes are
enabled on devices which didn't disable them previously.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109163001.146867-6-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Konrad Dybcio [Sat, 9 Jan 2021 16:29:58 +0000 (17:29 +0100)]
arm64: dts: qcom: msm8998: Add capacity-dmips-mhz to CPU cores
Add capacity-dmips-mhz to ensure the scheduler can efficiently
make use of the big.LITTLE core configuration.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109163001.146867-5-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Konrad Dybcio [Sat, 9 Jan 2021 16:29:57 +0000 (17:29 +0100)]
arm64: dts: qcom: msm8998: Add I2C pinctrl and fix BLSP2_I2C naming
The BLSP2-connected interfaces started from 0 which is.. misleading
to say the least.. the clock names corresponding to these started
from 1, so let's align to that so as to reduce confusion.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109163001.146867-4-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Konrad Dybcio [Sat, 9 Jan 2021 16:29:56 +0000 (17:29 +0100)]
arm64: dts: qcom: msm8998: Add DMA to I2C hosts
Add DMA properties to I2C hosts to allow for DMA transfers.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109163001.146867-3-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Konrad Dybcio [Sat, 9 Jan 2021 16:29:55 +0000 (17:29 +0100)]
arm64: dts: qcom: msm8998: Merge in msm8998-pins.dtsi to msm8998.dtsi
This is the usual way of handling pin configuration upstream now, so
align to it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109163001.146867-2-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Vincent Knecht [Sat, 23 Jan 2021 10:44:16 +0000 (11:44 +0100)]
arm64: dts: msm8916: Fix reserved and rfsa nodes unit address
Fix `reserved` and `rfsa` unit address according to their reg address
Fixes:
7258e10e6a0b ("ARM: dts: msm8916: Update reserved-memory")
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20210123104417.518105-1-vincent.knecht@mailoo.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Iskren Chernev [Mon, 1 Feb 2021 10:56:57 +0000 (12:56 +0200)]
ARM: dts: qcom: msm8974-klte: Mark essential regulators
s1 and l12 regulators are used for the memory and cache on the Samsung
S5 (klte). If they are turned off the phone shuts down. So mark them as
always-on to prevent that from happening.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Link: https://lore.kernel.org/r/20210201105657.1642825-4-iskren.chernev@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Samuel Pascua [Mon, 1 Feb 2021 10:56:56 +0000 (12:56 +0200)]
ARM: dts: qcom: msm8974-klte: add support for display
Add initial support for the display found on the Samsung Galaxy 5 (klte)
phone. This is based on work from Jonathan Marek & Brian Masney.
Signed-off-by: Samuel Pascua <pascua.samuel.14@gmail.com>
[iskren.chernev@gmail.com: add reset gpio, regulators]
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210201105657.1642825-3-iskren.chernev@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Samuel Pascua [Mon, 1 Feb 2021 10:56:55 +0000 (12:56 +0200)]
ARM: dts: qcom: msm8974-klte: add support for GPU
Enable adreno dt node.
Signed-off-by: Samuel Pascua <pascua.samuel.14@gmail.com>
[iskren.chernev@gmail.com: changes after v1]
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210201105657.1642825-2-iskren.chernev@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Brian Masney [Mon, 1 Feb 2021 10:56:54 +0000 (12:56 +0200)]
ARM: dts: qcom: msm8974: add gpu support
Add support for the a3xx GPU. opp_table is chosen to include lower
frequencies common to all different msm8974 variants.
Signed-off-by: Brian Masney <masneyb@onstation.org>
[iskren.chernev@gmail.com: change after v1]
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210201105657.1642825-1-iskren.chernev@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Gustave Monce [Sun, 31 Jan 2021 01:38:49 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994-octagon: Add AD7147 and APDS9930 sensors
Add and configure AD7147 grip sensor and APDS9930 proximity sensor.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-19-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Gustave Monce [Sun, 31 Jan 2021 01:38:48 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994-octagon: Add TAS2553 codec
Lumia 950/XL feature a TAS2553 codec. Configure it using the
TAS2552 driver.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-18-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Gustave Monce [Sun, 31 Jan 2021 01:38:47 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994-octagon: Add sensors on blsp1_i2c5
Add AK09912 magnetometer, ZPA2326 barometer and MPU6500 accelerometer
nodes.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-17-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Gustave Monce [Sun, 31 Jan 2021 01:38:46 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994-octagon: Add NXP NFC node
Octagon devices use PN544 connected over I2C. Configure it.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-16-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Konrad Dybcio [Sun, 31 Jan 2021 01:38:45 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994-octagon: Add FM Radio and DDR regulator nodes
FAN53526 and SI470X are both connected over blsp2_i2c5. Configure them.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-15-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Gustave Monce [Sun, 31 Jan 2021 01:38:44 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994-octagon: Configure PON keys
Both the power key and the vol- key are connected over PON.
Configure them.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-14-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Gustave Monce [Sun, 31 Jan 2021 01:38:43 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994-octagon: Configure Lattice iCE40 FPGA
Octagon devices have a Lattice iCE40 FPGA connected over SPI.
Configure it.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-13-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Gustave Monce [Sun, 31 Jan 2021 01:38:42 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994-octagon: Add uSD card and disable HS400 on eMMC
Lumia 950/XL, like other phones, ship with different storage chips.
Some of them are not capable of stable operation at HS400. Disable it.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-12-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Gustave Monce [Sun, 31 Jan 2021 01:38:41 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994-octagon: Configure HD3SS460 Type-C mux pins
The driver is not available yet, so hardcode the pins.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-11-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Gustave Monce [Sun, 31 Jan 2021 01:38:40 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994-octagon: Add QCA6174 bluetooth
Configure and enable QCA6174 Bluetooth and required pins.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-10-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Gustave Monce [Sun, 31 Jan 2021 01:38:39 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994-octagon: Configure regulators
Configure the regulators to ensure proper voltages across
the board.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-9-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Gustave Monce [Sun, 31 Jan 2021 01:38:38 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994-octagon: Add gpio-keys and Hall sensor
This enables tje hardware keys as well as the Hall sensor.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-8-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Gustave Monce [Sun, 31 Jan 2021 01:38:37 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994-octagon: Fix up the memory map
Windows-based devices have a far different memory map than
the standard LA one.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-7-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Gustave Monce [Sun, 31 Jan 2021 01:38:36 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8992/4-lumia*: Create a common DTS
Lumia 950 and 950XL are both based on the Octagon board, sharing
the vast majority of components, configuration etc. Commonize it.
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-6-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Konrad Dybcio [Sun, 31 Jan 2021 01:38:35 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8992: Make the DT an overlay on top of 8994
This saves a good thousand lines of code, perhaps even
more in the long run.
Co-developed-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-5-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Konrad Dybcio [Sun, 31 Jan 2021 01:38:34 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994: Sort hwlock properly
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-4-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Gustave Monce [Sun, 31 Jan 2021 01:38:33 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994: Fix remaining BLSP errors/mistakes
* Move 35500 clock-frequency to kitakami (turns out it's a Sony specific)
* Add missing interfaces
* Fix the naming scheme
* Fix up pin assignments to make all BLSPs work
* Add DMA where previously omitted
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-3-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Konrad Dybcio [Sun, 31 Jan 2021 01:38:32 +0000 (02:38 +0100)]
arm64: dts: qcom: msm8994: Add SMP2P nodes
They will be required for bringup of remote processors.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-2-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Jonathan Albrieux [Mon, 25 Jan 2021 09:44:32 +0000 (10:44 +0100)]
arm64: dts: qcom: msm8916-longcheer-l8910: Add imu/magnetometer
BQ Aquaris X5 (Longcheer L8910) has:
- BMI160 accelerometer and gyroscope sensor
- AK09911 magnetometer sensor
Add them to the device tree.
This patch depends on patch "arm64: dts: qcom: msm8916: Add blsp_i2c3".
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Link: https://lore.kernel.org/r/20210125094435.7528-4-jonathan.albrieux@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Jonathan Albrieux [Mon, 25 Jan 2021 09:44:31 +0000 (10:44 +0100)]
arm64: dts: qcom: msm8916: Add blsp_i2c3
MSM8916 has another I2C QUP controller that can be enabled on
GPIO 10 and 11.
Add blsp_i2c3 to msm8916.dtsi and disable it by default.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Link: https://lore.kernel.org/r/20210125094435.7528-3-jonathan.albrieux@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Jonathan Albrieux [Mon, 25 Jan 2021 09:44:30 +0000 (10:44 +0100)]
arm64: dts: qcom: Add device tree for BQ Aquaris X5 (Longcheer L8910)
BQ Aquaris X5 (Longcheer L8910) is a smartphone using the MSM8916 SoC.
Add device tree with initial support for:
- SDHCI (internal and external storage)
- USB Device Mode
- UART
- Regulators
- WiFi/BT
- Volume buttons
- Vibrator
- Touchkeys backlight
This device tree is based on downstream device tree from BQ and from
Longcheer L8915 device tree.
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Link: https://lore.kernel.org/r/20210125094435.7528-2-jonathan.albrieux@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Manivannan Sadhasivam [Wed, 27 Jan 2021 23:42:21 +0000 (02:42 +0300)]
arm64: dts: qcom: rb5: Enable PCIe ports and PHY
RB5 has 3 PCIe ports exposed to connect PCIe client devices. PCIe0 is
connected to QCA6391 chipset and others are available on the HS3
expansion connector. Hence, enable all of them.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210127234221.947306-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Manivannan Sadhasivam [Wed, 27 Jan 2021 23:42:20 +0000 (02:42 +0300)]
arm64: dts: qcom: sm8250: Add PCIe support
Add PCIe support for Qcom SM8250 SoC. This SoC has 3 PCIe Gen 3
instances based on Designware IP, out of which PCIe0 has 1 lane support
and the rest have 2 lane support.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[DB: add ddrss_sf_tbu clock]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210127234221.947306-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Vinod Koul [Wed, 27 Jan 2021 12:30:54 +0000 (18:00 +0530)]
arm64: dts: qcom: Add basic devicetree support for SM8350-MTP board
Add basic devicetree support for Qualcomm Technologies, Inc SM8350 SoC
MTP board. This enabled uart node and adds rpmh-regulators present for
this board.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210127123054.263231-7-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Vinod Koul [Wed, 27 Jan 2021 12:30:53 +0000 (18:00 +0530)]
arm64: dts: qcom: Add basic devicetree support for SM8350 SoC
Add basic devicetree support for Qualcomm Technologies, Inc SM8350 SoC.
This adds gcc, pinctrl, reserved memory, uart, cpu nodes for this SoC.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210127123054.263231-6-vkoul@kernel.org
[bjorn: Adjusted 4th timer interrupt, per input from Sai]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Vinod Koul [Wed, 27 Jan 2021 12:30:52 +0000 (18:00 +0530)]
dt-bindings: firmware: scm: Add SM8250 and SM8350 compatible
Add compatible for SM8150 and SM8350 SoCs.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210127123054.263231-5-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Vinod Koul [Wed, 27 Jan 2021 12:30:51 +0000 (18:00 +0530)]
dt-bindings: arm: cpus: Add kryo685 compatible
Kryo685 is found in SM8350, so add it to the list of cpu compatibles
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210127123054.263231-4-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Vinod Koul [Wed, 27 Jan 2021 12:30:49 +0000 (18:00 +0530)]
dt-bindings: arm: qcom: Document SM8350 SoC and boards
Document the SM8350 SoC binding and also the boards using it.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210127123054.263231-2-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Vincent Knecht [Sat, 30 Jan 2021 10:57:12 +0000 (11:57 +0100)]
arm64: dts: qcom: Disable MDSS by default for 8916/8016 devices
Disable MDSS (Mobile Display Subsystem) by default in msm8916.dtsi
and only explicitly enable it in devices' DT which actually use it.
This leads to faster boot and cleaner logs for other devices,
which also won't have to explicitly disable MDSS to use framebuffer.
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20210130105717.2628781-4-vincent.knecht@mailoo.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Vincent Knecht [Sat, 30 Jan 2021 10:57:11 +0000 (11:57 +0100)]
arm64: dts: qcom: Add device tree for Alcatel Idol 3 (4.7")
The Alcatel Idol 3 (4.7") is a smartphone based on MSM8916.
Add a device tree with support for USB, eMMC, SD-Card, WiFi,
BT, power/volume buttons, vibrator and the following sensors:
magnetometer, accelerometer, gyroscope, ambient light+proximity
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20210130105717.2628781-3-vincent.knecht@mailoo.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Vincent Knecht [Sat, 30 Jan 2021 10:57:10 +0000 (11:57 +0100)]
dt-bindings: vendor-prefixes: add Alcatel
Document vendor prefix for Alcatel
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20210130105717.2628781-2-vincent.knecht@mailoo.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:30 +0000 (04:41 +0100)]
ARM: dts: mmp3: Fix the CCIC interrupts
A copy & paste oversight from MMP2; camera interrupts are handled
via a multiplexer on MMP3.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-13-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:29 +0000 (04:41 +0100)]
ARM: dts: mmp3-dell-ariel: Replace SSP2 with spi-gpio
The firmware leaves the pins in GPIO mode. Until we have a proper pinmux
driver hooked on we just need to bitbang SPI. No big deal, this is just
used for the power button and performance is not important.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-12-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:28 +0000 (04:41 +0100)]
ARM: dts: mmp3-dell-ariel: Add the power button node
This adds support for the power button attached to the Embedded Controller
on a Dell Wyse 3020 "Ariel" board.
However, while the EC itself is controlled via I2C, the input capability
for the power button acts as a separate device attached to the SPI, hence
it has a separate device node.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-11-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:27 +0000 (04:41 +0100)]
ARM: dts: mmp3-dell-ariel: Add the embedded controller
Add the device node for the computer's embedded controller, responsible
for controlling the LEDs and system power.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-10-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:26 +0000 (04:41 +0100)]
ARM: dts: mmp2-olpc-xo-1-75: Use symbolic names for audio clocks
These are slighly easier to read.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-9-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:25 +0000 (04:41 +0100)]
ARM: dts: mmp2: Use symbolic names for audio clocks
These are slighly easier to read.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-8-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:24 +0000 (04:41 +0100)]
ARM: dts: mmp3: Extend the MPMU reg range
The ACGR register is at the offset of 0x1024, beyond the 4k originally
assigned to the MPMU range.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-7-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:23 +0000 (04:41 +0100)]
ARM: dts: mmp3-dell-ariel: Drop linux,usable-memory from /memory
Drop the linux,usable-memory properties; the schema is unhappy about
them.
They've been cargo-culted from Open Firmware and I don't know what
purpose they serve. Perhaps they are meant to provide the OFW runtime.
In that case it's still okay to drop them from here; OFW is welcome to add
it upon boot.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-6-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:22 +0000 (04:41 +0100)]
ARM: dts: mmp2-olpc-xo-1-75: Drop linux,usable-memory from /memory
Drop the linux,usable-memory properties; the schema is unhappy about
them:
mmp2-olpc-xo-1-75.dt.yaml: /: memory: False schema does not allow
{'linux,usable-memory': [[0,
528482304]],
'available': [[847872,
519245824, 4096, 782336]],
'reg': [[0,
536870912]], 'device_type': ['memory']}
They've been cargo-culted from Open Firmware and I don't know what
purpose they serve. Perhaps they are meant to provide the OFW runtime.
In that case it's still okay to drop them from here; OFW is welcome to add
it upon boot.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-5-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:21 +0000 (04:41 +0100)]
ARM: dts: mmp2-olpc-xo-1-75: Fix memory node name
It contains a reg property. Add its base to the node name.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-4-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:20 +0000 (04:41 +0100)]
media: dt-bindings: marvell,mmp2-ccic: Allow power-domains property
On MMP3 the camera interface is on a separate power island. This
property tells the driver to enable it when appropriate.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-3-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:19 +0000 (04:41 +0100)]
dt-bindings: gpio: mrvl-gpio: Fix the gpio-ranges property
The property specifies a list of GPIO-capable pins. Don't limit it to a
single element as there's presumably more than one GPIO pin.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-2-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 17:03:54 +0000 (18:03 +0100)]
Merge tag 'mvebu-dt64-5.12-1' of git://git./linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 5.12 (part 1)
- rename u-boot mtd partition to a53-firmware on Turris Mox (Armada 3720 based)
- improve SDHCI support on AP807 based board
- move SATA comphy into main armada-37xx.dtsi
- add Armada 8K/7K PWM support
* tag 'mvebu-dt64-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: armada: add pwm offsets for ap/cp gpios
arm64: dts: marvell: armada-37xx: Add SATA comphy into main armada-37xx.dtsi file
arm64: dts: cn913x-db: enable MMC HS400
arm64: dts: change AP807 SDHCI compatibility string
arm64: dts: armada-3720-turris-mox: rename u-boot mtd partition to a53-firmware
Link: https://lore.kernel.org/r/87pn1jn48s.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 17:02:48 +0000 (18:02 +0100)]
Merge tag 'mvebu-dt-5.12-1' of git://git./linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 5.12 (part 1)
Improve LED and fan support on Helios4 boad (Armada 388 based)
Add ECC configuration for Linksys board (Aramda 385 based)
* tag 'mvebu-dt-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: armada388-helios4: assign pinctrl to each fan
ARM: dts: armada388-helios4: assign pinctrl to LEDs
ARM: dts: armada-385-linksys: fix usage with newer devices
Link: https://lore.kernel.org/r/87sg6fn49o.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 17:00:48 +0000 (18:00 +0100)]
Merge tag 'v5.11-next-dts64' of git://git./linux/kernel/git/matthias.bgg/linux into arm/dt
mt6779:
- add DEVAPC node to detect mallicious bus accesses
- add PMIC wrapper node
mt7622:
- add reset to mmc node
mt8183:
- fix typo in drma-fifo-size property
- refine compatible for the disp-gamma
- add phandel of PM domain to the PWM node
- add second PWM node
- add regulator to MFG power domain
- enable DSI node in kukui
- add krane sku0, which uses different panel
- fix mailbox dt-bindings include path
mt8192:
- add NOR flash node
- add PSCI based CPU idle states
mt8516:
- add node for the UART's APDMA controller
* tag 'v5.11-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: mt8183: Fix GCE include path
dts64: mt7622: fix slow sd card access
dt-bindings: arm64: dts: mediatek: Add krane sku0
arm64: dts: mt8183: Add krane-sku0 board.
arm64: dts: mt8183: config dsi node
arm64: dts: mt6779: Support pwrap on Mediatek MT6779 platform
arm64: dts: mt6779: Support devapc
arm64: dts: mt8192: Add cpu-idle-states
arm64: dts: mediatek: mt8183: Add domain supply for mfg
arm64: dts: mt8192: add nor_flash device node
arm64: dts: mediatek: mt8516: add support for APDMA
arm64: dts: mediatek: mt8183-evb: add PWM support
arm64: dts: mediatek: mt8183: add pwm node
arm64: dts: mt8183: Add missing power-domain for pwm0 node
arm64: dts: mt8183: refine gamma compatible name
arm64: dts: mt8183: rename rdma fifo size
Link: https://lore.kernel.org/r/565be0cc-460a-7d0b-47da-09bf0401e8fe@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Walleij [Mon, 1 Feb 2021 09:13:08 +0000 (10:13 +0100)]
ARM: dts: ux500: Add Flash LEDs to Samsung phones
This adds the Richtek RT8515 Flash LED to the Golden,
Skomer and Janice device trees.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210201091308.284465-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 16:59:35 +0000 (17:59 +0100)]
Merge tag 'keystone_dts_for_5.12' of git://git./linux/kernel/git/ssantosh/linux-keystone into arm/dt
ARM: DTS: Keystone update for v5.12
Contains couple updates for DWC USB3 DT nodes
* tag 'keystone_dts_for_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
arm: dts: keystone: Harmonize DWC USB3 DT nodes name
arm: dts: keystone: Correct DWC USB3 compatible string
Link: https://lore.kernel.org/r/1612156910-11159-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 16:58:32 +0000 (17:58 +0100)]
Merge tag 'arm-soc/for-5.12/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.12 please pull the following:
- Rafal continues to add support for the 4906/4908 SoC family and adds
a Device Tree for the Netgear R8000P router (4906-based), describes
the NAND controller of the 4908 more appropriately (based on the older
63138 DSL SoC), describes the 4908 PCIe reset controller, internal
Ethernet switch (Starfighter 2 switch) and finally the Power
Management Bus (PMB)
- Scott removes all of the SATA-related Device Tree nodes since SATA
is unused on the Stingray product line
* tag 'arm-soc/for-5.12/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Remove SATA from Stingray
arm64: dts: broadcom: bcm4908: describe PMB block
arm64: dts: broadcom: bcm4908: describe internal switch
arm64: dts: broadcom: bcm4908: describe PCIe reset controller
arm64: dts: broadcom: bcm4908: use proper NAND binding
arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files
dt-bindings: arm: bcm: document Netgear R8000P binding
Link: https://lore.kernel.org/r/20210131221721.685974-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 16:57:14 +0000 (17:57 +0100)]
Merge tag 'arm-soc/for-5.12/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.12, please pull the following:
- Dave adds a proper compatile string for the DSI1 panel on 2711
(Raspberry Pi 4) to permit adequate driver differentiation
- Nicolas declares reserved memory regions filed by the Rasbperry Pi
bootloader to indicate the running system configuration
- Maxime declares the BSC (HDMI I2C controller) and CEC interrupt
controllers
- Stanislav fixes a tab vs. space issue in the BCM21664 DTS
* tag 'arm-soc/for-5.12/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711: Add the CEC interrupt controller
ARM: dts: bcm21664: Replace spaces with a tab
ARM: dts: bcm2711: Add the BSC interrupt controller
ARM: dts: bcm2711: Add reserved memory template to hold firmware configuration
ARM: dts: bcm2711: Use compatible string for BCM2711 DSI1
Link: https://lore.kernel.org/r/20210131221721.685974-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 16:53:02 +0000 (17:53 +0100)]
Merge tag 'sunxi-dt-for-5.12' of git://git./linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
- DT fixes spotted through the schemas
- Mali Support for the A10s/A13/GR8/R8
- MMC improvements for the A64 and H6
- New board: SL631 Action Camera, PineTab Early Adopter
* tag 'sunxi-dt-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (47 commits)
ARM: dts: sunxi: Rename nmi_intc to r_intc
ARM: dts: sun8i: h2-plus: bananapi-m2-zero: Increase BT UART speed
ARM: dts: sunxi: bananapi-m2-plus: Increase BT UART speed
arm64: dts: allwinner: pine-h64: Fix typos in BT GPIOs
arm64: dts: allwinner: pinetab: Fix the panel compatible
arm64: dts: allwinner: pinephone: Remove useless light sensor supplies
arm64: dts: allwinner: h6: Use - instead of @ for DT OPP entries
ARM: dts: sun8i-a33: sina33: Add missing panel power supply
ARM: dts: sun8i-a83t: Remove empty CSI port
ARM: dts: sun8i-s3: pinecube: Fix CSI DTC warnings
ARM: dts: sun8i-s3: impetus: Fix the USB PHY ID detect GPIO properties
ARM: dts: sun8i: nanopi-r1: Fix GPIO regulator state array
ARM: dts: sun6i: primo81: Remove useless io-channel-cells
ARM: dts: sunxi: Fix CPU thermal zone node name
ARM: dts: sunxi: Add missing backlight supply
ARM: dts: sunxi: Fix the LED node names
dt-bindings: rtc: sun6i-a31-rtc: Loosen the requirements on the clocks
dt-bindings: iio: adc: Add AXP803 compatible
dt-bindings: sunxi: Fix the pinecube compatible
ARM: dts: sun8i-v3s: Add CSI0 MCLK pin definition
...
Link: https://lore.kernel.org/r/48511540-fdd6-4fbe-8037-ec9fa8436147.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 16:49:21 +0000 (17:49 +0100)]
Merge tag 'ti-k3-dt-for-v5.12' of git://git./linux/kernel/git/nmenon/linux into arm/dt
Devicetree changes for TI K3 platforms for v5.12 merge window:
- Common fixups: PMU compatible, MMC dtbs_check warnings squelch
- J7200: R5F, PCIe, SERDES support
- J721E: PCIE fixups
* tag 'ti-k3-dt-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux:
arm64: dts: ti: k3*: Fixup PMU compatibility to be CPU specific
arm64: dts: ti: k3: mmc: fix dtbs_check warnings
arm64: dts: ti: k3-j7200-som-p0: Add DDR carveout memory nodes for R5Fs
arm64: dts: ti: k3-j7200-som-p0: Add mailboxes to R5Fs
arm64: dts: ti: k3-j7200: Add R5F cluster nodes
arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe
arm64: dts: ti: k3-j7200-common-proc-board: Enable SERDES0
arm64: dts: ti: k3-j7200-main: Add PCIe device tree node
arm64: dts: ti: k3-j7200-main: Add SERDES and WIZ device tree node
arm64: dts: ti: k3-j721e-main: Remove "syscon" nodes added for pcieX_ctrl
arm64: dts: ti: k3-j721e-main: Fix supported max outbound regions
Link: https://lore.kernel.org/r/20210130131422.yvq2edxfongys7x5@pendant
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Laurent Pinchart [Thu, 21 Jan 2021 12:36:07 +0000 (13:36 +0100)]
arm64: dts: zynqmp: Wire up the DisplayPort subsystem
Enable the dpsub device and wire it up to the PS-GTR PHY lanes routed to
the DisplayPort connector.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/9769d4d103b6eb75e3324825117f6832a746004e.1611232558.git.michal.simek@xilinx.com
Michal Simek [Thu, 21 Jan 2021 12:36:06 +0000 (13:36 +0100)]
arm64: dts: zynqmp: Add DisplayPort subsystem
Add a DT node for the DisplayPort subsystem, a hard IP present in the
Zynq Ultrascale+ MPSoC.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/4d978aef852cacdfb35aa8e50d648a787e73b90c.1611232558.git.michal.simek@xilinx.com
Laurent Pinchart [Thu, 21 Jan 2021 12:36:05 +0000 (13:36 +0100)]
arm64: dts: zynqmp: Add DPDMA node
Add a DT node for the DisplayPort DMA engine (DPDMA).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/3d11015512a085592f2aca76eeddc04178d38bbe.1611232558.git.michal.simek@xilinx.com
Michal Simek [Thu, 21 Jan 2021 10:56:03 +0000 (11:56 +0100)]
dt-bindings: arm: Fix typo in zcu111 board
Trivial fix.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/13d064fc4850f96904a04e330cea5295d3751e46.1611226560.git.michal.simek@xilinx.com
Michal Simek [Thu, 21 Jan 2021 10:27:00 +0000 (11:27 +0100)]
arm64: dts: zynqmp: Add description for zcu104 revC
Xilinx ZynqMP zcu104 revC and newer board revisions have different i2c
structure compare to revA. The rest of the board is the same from software
perspective.
Also enable DMAs and QSPI.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/17f68c235ea1ce96c3293ca0cf3178951d6663f7.1611224800.git.michal.simek@xilinx.com
Michal Simek [Thu, 21 Jan 2021 10:26:59 +0000 (11:26 +0100)]
arm64: dts: zynqmp: Add missing iommu IDs
Add missing iommu IDs to all IPs which have IDs assigned.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/78afdafdc60c3182318894f2808f7f337a798278.1611224800.git.michal.simek@xilinx.com
Michal Simek [Thu, 21 Jan 2021 10:26:58 +0000 (11:26 +0100)]
arm64: dts: zynqmp: Add missing lpd watchdog node
Xilinx ZynqMP SoC has FPD (Full Power Domain) and LPD (Low Power Domain)
watchdogs. There are cases where also LPD WDT should be used by Arm cores
that's why list it with disabled status.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/0489a1d5528614f1d570ea153d38b813f0c1eb9f.1611224800.git.michal.simek@xilinx.com
Michal Simek [Thu, 21 Jan 2021 10:26:57 +0000 (11:26 +0100)]
arm64: dts: zynqmp: Wire zynqmp qspi controller
Add missing ZynqMP qspi IP. It works in single mode only.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/5cebbc59a452f282c4ce0f0e1dffecadac8f126a.1611224800.git.michal.simek@xilinx.com
Michal Simek [Thu, 21 Jan 2021 10:26:56 +0000 (11:26 +0100)]
arm64: dts: zynqmp: Wire arasan nand controller
Add missing arasan controller with clocks. Disable it by default. Every
board can enable it with specifying others properties.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/05cc1ce7973ac5200aeca428c137b422c827c5e8.1611224800.git.michal.simek@xilinx.com
Michal Simek [Thu, 21 Jan 2021 10:26:55 +0000 (11:26 +0100)]
arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis
Add missing xlnx,mio-bank property to sdhci nodes. Also add properties with
0 value to have it listed in case that files are copied to different
projects where default case doesn't need to be handled in the same way.
That's why explicitly list them too.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/dbdfcc1b25af8b28fc658a37ce18902978cb410d.1611224800.git.michal.simek@xilinx.com
Michal Simek [Thu, 21 Jan 2021 10:26:54 +0000 (11:26 +0100)]
arm64: dts: zynqmp: Add label for zynqmp_ipi
Add label which is used by bootloader for adding bootloader specific flag.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/3dc8416abdd3498e61edcd83830a12af295c5c6d.1611224800.git.michal.simek@xilinx.com
Michal Simek [Thu, 21 Jan 2021 10:26:53 +0000 (11:26 +0100)]
arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
Enable psgtr driver and write clocks property to get sata to work.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/80b52ef97501968ee97fc152363bc4b9b7bb2cff.1611224800.git.michal.simek@xilinx.com
Michal Simek [Thu, 21 Jan 2021 10:26:52 +0000 (11:26 +0100)]
arm64: dts: zynqmp: Enable reset controller driver
Enable reset controller to be prepared for use.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/4fb62952f61e5046d750fff0e3e469c7abd1d0d0.1611224800.git.michal.simek@xilinx.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Michal Simek [Thu, 21 Jan 2021 10:26:51 +0000 (11:26 +0100)]
arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
Enable si5341 driver is the main chip for providing preprogrammed clocks
for the whole platform.
# cat /sys/kernel/debug/clk/clk_summary
...
refhdmi 1 1 0
114285000 0 0 50000
xtal_0 0 0 0
114285000 0 0 50000
pll_0 0 0 0
40731174000000 0 0 50000
clk1_0 0 0 0
27000000 0 0 50000
clk0_0 0 0 0
27000000 0 0 50000
ref48M 1 2 0
48000000 0 0 50000
si5341 0 4 0
14000000 0 0 50000
clock-generator.N4 0 0 0 0 0 0 50000
clock-generator.N3 0 1 0
733260000 0 0 50000
clock-generator.9 0 1 0
33330000 0 0 50000
clock-generator.N2 0 1 0
104000000 0 0 50000
clock-generator.2 0 1 0
26000000 0 0 50000
clock-generator.N1 0 2 0
594000000 0 0 50000
clock-generator.7 0 1 0
74250000 0 0 50000
clock-generator.0 0 1 0
27000000 0 0 50000
clock-generator.N0 0 4 0
1000000000 0 0 50000
clock-generator.8 0 0 0 0 0 0 50000
clock-generator.6 0 1 0
125000000 0 0 50000
clock-generator.5 0 1 0
100000000 0 0 50000
clock-generator.4 0 1 0
100000000 0 0 50000
clock-generator.3 0 1 0
125000000 0 0 50000
clock-generator.1 0 0 0 0 0 0 50000
...
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/b93f13297684704a60e8d7274009a20aa98d14f7.1611224800.git.michal.simek@xilinx.com