Richard Purdie [Sat, 19 Jan 2013 23:50:10 +0000 (23:50 +0000)]
perl-rprovides: Fix perl-module-config anf perl-module-build providers
The rearrangement of various file contents left these empty modules which
don't get packaged and hence lead to image creation errors on anything using
them. This patch ensures the dependencies are attached to the packages
which contain the config files or the build module infrastructure as
appropriate. It also resolves some confusion over whether the name is
perl-module-build or perl-module-module-build, the latter being the
autogenerated dependency which previously couldn't be found.
(From OE-Core rev:
442f161ecd498513b72e7f1ca2668325c9389d24)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 19 Jan 2013 23:49:24 +0000 (23:49 +0000)]
perl: Add dyanloader build hack
Patch perl to allow builds to work where a native perl running against target modules
attempts to load a dynamic binary module. We assume that a native version of the
module exists as it would for the target and perform an appropriate path
substitution.
(From OE-Core rev:
b5ea12fec329fe419bc3672ed1e1d5733ff2a9d3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 19 Jan 2013 23:48:46 +0000 (23:48 +0000)]
perl-native: Add errno_ver.diff patch to native perl
Apply the errno_ver.diff patch to the native perl version. This ensures that when
we're building target modules, running the native perl binary but in a target
configuration we don't see error messages.
libencode-detect-perl is a module which tests this.
(From OE-Core rev:
52354c863a1a2e467ea1b55168bf4273f31bbba4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 19 Jan 2013 23:48:13 +0000 (23:48 +0000)]
cpan_build: Fix cmaker Build.PL module builds
Certain cpan Build.PL based modules were failing to build due to
the host's config information being used instead of the targets.
This patch sets the appropriate variables to ensure the modules
get the correct configuration from the target config_heavy.pl script.
It also ensures the linker is CCLD, not LD since the LDFLAGS contain
-Wl,XXX options and build failures result if LD is used.
libencode-detect-perl is a module which tests this class extensively.
(From OE-Core rev:
7fac8bffcd250aec90c0b675aeb2bbe7896d0ae1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Fri, 25 Jan 2013 08:35:09 +0000 (16:35 +0800)]
bitbake: bitbake-layers: fix get_file_layer
The get_file_layer can't handle the nested layer correctly, e.g.:
meta-intel/conf/layer.conf
meta-intel/meta-cedartrail/conf/layer.conf
They are two layers, the file:
meta-intel/common/recipes-bsp/amt/lms_7.1.20.bb
belongs to meta-intel's layer, but the get_file_layer() may return
meta-cedartrail accordig to BBLAYERS' order, since it uses:
for layerdir in self.bblayers:
if regex.match(os.path.join(layerdir, 'test')):
return self.get_layer_name(layerdir)
which doesn't care the filename, re-match the filename would fix the
problem.
[YOCTO #3387]
(Bitbake rev:
7a31b9eac4d894c302f0e052a132c31b17d13d1f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Fri, 25 Jan 2013 08:34:13 +0000 (16:34 +0800)]
bitbake: cache.py: remove the duplicated self.file_depends
There are two "self.file_depends =" lines in cache.py::CoreRecipeInfo:
class CoreRecipeInfo(RecipeInfoCommon):
__slots__ = ()
cachefile = "bb_cache.dat"
def __init__(self, filename, metadata):
self.file_depends = metadata.getVar('__depends', False)
[snip]
self.file_depends = metadata.getVar('__depends', False)
They are duplicated, remove the last one.
[YOCTO #3795]
(Bitbake rev:
409a4aa0e166c25a8cfcd91e54f1b61cced74e87)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristiana Voicu [Wed, 23 Jan 2013 12:13:44 +0000 (14:13 +0200)]
bitbake: hob: hob do not use .hob dir for variables from local.conf and bblayers.conf
If .hob exists, hob takes the variable from there. Change to not override anymore
the variables which comes from bblayers.conf and local.conf
[YOCTO #2934]
(Bitbake rev:
00533e83038e3d5e3cd5d1be73c45afece92ec0c)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Constantin Musca [Wed, 23 Jan 2013 14:54:03 +0000 (16:54 +0200)]
bitbake: prserv: use only PRSERV_HOST
- remove PRSERV_PORT variable
- use 'hostname:port' as PRSERV_HOST format
- use 'localhost:0' for enabling the local PRServer
[YOCTO #3744]
(Bitbake rev:
ad62eed9e1f0867a406e9fbfa44916a0f1ad1282)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 25 Jan 2013 11:28:57 +0000 (11:28 +0000)]
rpm: properly disable perl file dependency checking for rpmdeps
We don't want the perl module dependencies being added to each package
by rpmdeps because it causes too many problems when the modules aren't
available at install time (since they get added in do_package which is
too late for the build system to ensure they are available), and it
appears that the perl dependency gathering isn't working reliably in any
case judging by how they are detected on some build hosts and not
others.
This was being disabled previously but it seems like the macros moved
to a different file at some point and nobody noticed; thus make sure we
disable the macros in all RPM macro files.
Should fix [YOCTO #3699].
(From OE-Core rev:
e43a72af9055b76eb2ad7e2e42e6a5f3c8854efa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Wed, 23 Jan 2013 02:45:00 +0000 (18:45 -0800)]
systemd: Fix build on ppc
ppc discovers an interesting issue in linking systemd where a library is
missing in link cmdline and linker barfs
./.libs/libsystemd-core.a(libsystemd_core_la-manager.o): In function
`manager_check_finished':
/builddir/build/BUILD/systemd-196/src/core/manager.c:2092: undefined
reference to `sd_notifyf'
collect2: error: ld returned 1 exit status
For more info see
https://bugzilla.redhat.com/show_bug.cgi?id=888255
(From OE-Core rev:
2e2a91025ca9c113365c810ce08b48201fe792b8)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 23 Jan 2013 12:10:14 +0000 (12:10 +0000)]
libcheck: fix HOMEPAGE
This was pointing to the zypper homepage, presumably a copy-paste error.
(From OE-Core rev:
5f363483253af712f8ccb173c4cc9d77b7c1ae8c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 23 Jan 2013 12:10:13 +0000 (12:10 +0000)]
classes/image-swab: remove zypper-related references
Remove references to libzypp, zypper and sat-solver which have been
removed.
(From OE-Core rev:
cc9144f99844a8485b2b96182bdf40429286ae66)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 23 Jan 2013 12:10:12 +0000 (12:10 +0000)]
sat-solver: remove
This was only needed by libzypp, which has itself been removed.
(From OE-Core rev:
905f0d407a259f89e420ccdbee5a471cb0fea8f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 23 Jan 2013 12:10:11 +0000 (12:10 +0000)]
libzypp: remove
This was only needed by zypper, which has itself been removed.
(From OE-Core rev:
5c8169bd1c114aab76001a38ee4dd68d00d825e0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 23 Jan 2013 12:10:10 +0000 (12:10 +0000)]
zypper: remove
Functionality provided by Zypper is now covered more effectively by
Smart (python-smartpm) which is now being used for package management
on the target when enabled and RPM packaging is selected.
Fixes [YOCTO #3349].
(From OE-Core rev:
cc866433341532a0b5cf8cd5f67998960ea96499)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 21 Jan 2013 22:49:50 +0000 (22:49 +0000)]
packagedata: Add error message if multiple recipes try to write the same package
If multiple recipes try and write the same package it resulted in a
rather confusing traceback and unintuitive error. This patch
prints a human readable error instead.
[YOCTO #3645]
(From OE-Core rev:
6f817779af77fdb0b861297f0f43c4c6607ce6f0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 21 Jan 2013 22:49:08 +0000 (22:49 +0000)]
sanity.bbclass: Ensure tmpdir exists when running the check
This avoids tracebacks from bitbake if the directory doesn't already
exist.
[YOCTO #3640]
(From OE-Core rev:
1a60e96b21d328fe936e594f3061459e8f2f1b5e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 24 Jan 2013 05:56:11 +0000 (21:56 -0800)]
core-image: Add hwcodecs IMAGE_FEATURE
Currently hardware codecs are being injected in rather ugly ways and end up
either in no or all images. This adds a dedicated IMAGE_FEATURE for them based
on the MACHINE_HWCODECS variable. We may need to refine this in due course
but this patch at least illustrates the concept.
(From OE-Core rev:
1cb370587fd72e3f0f69678748108cc4116767fb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 24 Jan 2013 05:56:09 +0000 (21:56 -0800)]
packagegroup-core-x11-xserver: Add XSERVERCODECS variable
At present its hard for the system to provide extra x11 hardware codecs.
We could lump them in with the XSERVER variable but this is suboptimal as
in some use cases the user might not want to include them in some images.
With this patch we keep our options open about separating usage of the two
in the future.
(From OE-Core rev:
285c7577813cf75a3b554f8a5d6d7ba002127ef4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 24 Jan 2013 17:52:56 +0000 (17:52 +0000)]
base: make feature backfilling happen earlier
Backfilling DISTRO_FEATURES and MACHINE_FEATURES with _append statements happens
too late to use those variables with conditional inherits, like this:
inherit ${@base_contains('DISTRO_FEATURES','sysvinit','update-rc.d_real','',d)}
Instead, do the backfilling at ConfigParse time so that it happens earlier in
the parse, which results in that inherit behaving as expected when sysvinit was
backfilled.
(From OE-Core rev:
22429cdf79ed952072707a929643c7386fa7e056)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marcin Juszkiewicz [Thu, 24 Jan 2013 17:52:55 +0000 (17:52 +0000)]
bitbake.conf: unbreak all builds with custom DISTRO_FEATURES
Commit
9e7c64ca9afbf27edd0d35a1830ce55ee6d778ab broke all builds where
custom DISTRO_FEATURES were used.
Resulting images ended in non-bootable state due to lack of initscripts
(unless someone had sysvinit or systemd in D_E already).
https://bugs.launchpad.net/linaro-oe/+bug/1102910
https://bugs.launchpad.net/linaro-oe/+bug/1099405/comments/12
(From OE-Core rev:
211e473432230765a48d7af9c66c8737a08cdec7)
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 24 Jan 2013 05:56:10 +0000 (21:56 -0800)]
core-image-lsb-sdk/dev: Inherit the base image instead of duplicating
(From OE-Core rev:
de2ad361e7dfe553e2c49c73199da58ce44d89e4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Constantin Musca [Tue, 22 Jan 2013 09:39:30 +0000 (11:39 +0200)]
prserv: add LOCALCOUNT to AUTOINCs migration feature
- use migrate_localcount.bbclass to generate AUTOINC entries
which are exported to LOCALCOUNT_DUMPFILE
- import the generated AUTOINC entries
- one can migrate LOCALCOUNT to AUTOINC by executing:
bitbake-prserv-tool migrate_localcount
[YOCTO #3071]
(From OE-Core rev:
ffab86f13cafb10d8d6273b6af8cd9a3c84eae20)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Tue, 22 Jan 2013 05:04:29 +0000 (21:04 -0800)]
qemu.inc: Define preferred providers for libgl, libgles1 and libgles2
This is needed to to boot efl images on qemuarm,qemumips and qemuppc
these options were already defined for qemux86 and qemux86-64 and
therefore the images were booting fine for these two machines
(From OE-Core rev:
60e73068cf542c2134106fe6cfc5971874bbc766)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Tue, 22 Jan 2013 05:04:28 +0000 (21:04 -0800)]
systemd: Fix build on uclibc
Systemd has some uclibc specific patches which
needed to be forwarded ported to 196
(From OE-Core rev:
e39f01ba4f6d9d9f1d24fd01745530cde9e92131)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Tue, 22 Jan 2013 05:04:27 +0000 (21:04 -0800)]
uclibc-git: Upgrades to latest git
Drop upstream accepted patches
(From OE-Core rev:
b4ee580d37d15e699dd6efc6551f4c7f8e902e2a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Tue, 22 Jan 2013 08:44:05 +0000 (16:44 +0800)]
rootfs_rpm.bbclass: fix the unexpected postinst error
If the /etc/rpm-postinsts/ directory was empty, the following error
would occur at system startup.
ERROR: postinst /etc/rpm-postinsts/* failed
This patch fixes this issue.
[YOCTO #3767]
(From OE-Core rev:
202263aeca837dc7b6615a3dc34569c199163733)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Mon, 21 Jan 2013 22:44:42 +0000 (14:44 -0800)]
blktrace: add back do_install method
The recent change to blktrace removed the do_install method,
since this recipe does not use autotools it needs to specifiy
a do_install activity.
(From OE-Core rev:
f8832d969746fb879e63d1b28e6beef5ab82a39d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wolfgang Denk [Tue, 22 Jan 2013 12:18:05 +0000 (13:18 +0100)]
populate_sdk_base.bbclass: Allow installation of ix86 SDK on x86_64 host
Commit
c04f5435 "populate_sdk_base.bbclass: use SDK_ARCH instead
of SDKMACHINE" prevents not only the installation of 64 bit SDK
configurations on 32 bit hosts (which indeed cannot work), but also
the legitimate installation of a 32 bit SDK on a 64 bit host.
Fix this.
While there, also make sure we use the same patterns ("i[3-6]86" resp.
"x86[-_]64" to get unified strings for both INST_ARCH and SDK_ARCH.
(From OE-Core rev:
7ddd97b9b09fe7a327916ea88908a63375556ae6)
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 22 Jan 2013 15:37:56 +0000 (15:37 +0000)]
bitbake: crumbs: Add file lost from previous commit
(Bitbake rev:
90aabeb87d6c1f00d6333cc9930626d36b6d9709)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kang Kai [Tue, 22 Jan 2013 11:30:22 +0000 (19:30 +0800)]
createrepo-native: update dependency
"RDEPENDS_${PN}_class-native" doesn't work for native recipe because no
-native package will be created. Then the dependencies listed here are
not built when bitbake createrepo-native.
Update and use DEPENDS_class-native instead.
(From OE-Core rev:
0b8dc781e4df0edffa10ac989f8745ac3f684de0)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wenzong.fan@windriver.com [Tue, 22 Jan 2013 09:27:39 +0000 (17:27 +0800)]
bind: disable nslookup man page
The nslookup is not shipped for now, we should disable its man page if
the binary tool is not installed.
[YOCTO#3754]
(From OE-Core rev:
1a31918733a7f8479220c01fc99dd9099fdcaf9b)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristiana Voicu [Tue, 15 Jan 2013 14:50:39 +0000 (16:50 +0200)]
bitbake: hob: combo box updated correctly
The 'select a base image' option is no longer displayed once
an image is selected
[YOCTO #3671]
(Bitbake rev:
27f2247b4c227c3b5adb1ca33d0cd7f7b492e170)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Constantin Musca [Tue, 22 Jan 2013 09:37:57 +0000 (11:37 +0200)]
bitbake: persist_data: add get_by_pattern method to API
- one can use get_by_pattern to get a list of values associated
with keys that match the specified pattern
(Bitbake rev:
6ee1f58698e2d782c54ce5aec271bcec26107eac)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Constantin Musca [Tue, 22 Jan 2013 09:37:27 +0000 (11:37 +0200)]
bitbake: parse_py: add ~ to config_regexp
- enable the '~' character in bitbake variables
(Bitbake rev:
7c15ff1d50d7b601414f1d55c90e3c59981a0876)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristiana Voicu [Mon, 21 Jan 2013 14:40:07 +0000 (16:40 +0200)]
bitbake: hob: Hob should display warnings generated during parsing
-now Hob catches the warnings generated during parsing, and after the parsing
is completed, if there are any warnings, it shows a bar that contains a message
with how many warnings has encountered, and a button "View warnings"
-when "View warnings" button is clicked, Hob shows a dialog with the warnings;
if there more than 1 warning, you can use "Previous" and "Next" button to see them
[YOCTO #3215]
(Bitbake rev:
d7b5311d35b3974398fecabfb5ecf1effa85c27e)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristiana Voicu [Mon, 21 Jan 2013 14:50:40 +0000 (16:50 +0200)]
bitbake: hob: progress bar changed to busy cursor when you open log file
-the first implementation for this bug used a progress bar, that is shown
during open file process; it revelead that the progress bar stops earlier
-now I have implemented using gtk.show_uri() method, that shows itself a
busy cursor when it opens a file;
-deleted the code for the first implementation
[YOCTO #2997]
(Bitbake rev:
09d1c4c2db124104b9da460547b20a2c2ff07bb3)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 21 Jan 2013 18:09:21 +0000 (18:09 +0000)]
systemd: remove unused SERIAL_CONSOLE variable
(From OE-Core rev:
751c11e998431613389f094264f096fac5a1c1ae)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 21 Jan 2013 18:09:20 +0000 (18:09 +0000)]
systemd-serialgetty: skip package when not using systemd
As this package RDEPENDS on systemd it wants to build systemd, but if systemd
isn't a DISTRO_FEATURE then that package is skipped so world builds fail. Solve
this by skipping this package too.
(From OE-Core rev:
192efd033c38205e114f62e9f62696a9a49b0970)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 21 Jan 2013 18:09:19 +0000 (18:09 +0000)]
systemd-serialgetty: remove redundant statements
(From OE-Core rev:
e5820f56becb3bcee44a461f7fc5640159679a15)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 21 Jan 2013 10:53:01 +0000 (10:53 +0000)]
perl: Fix errors if configure is reattempted
If configure of perl is reattempted it currently fails as it tries to edit
files outside ${S}. Chaging from ${WORKDIR} to ${S} avoids this issue
and allows rebuilds to work.
(From OE-Core rev:
1b66c30eb6085aedce118ce086efbd2e562d0d6c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 21 Jan 2013 12:54:08 +0000 (12:54 +0000)]
systemd: update uclibc patch headers
Discussion has revealed that upstream has formally rejected patches to support
uclibc, so mark this in the headers.
(From OE-Core rev:
caf6aa1c996a949ca85f4beaf40d2a19433d18c8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 21 Jan 2013 15:29:31 +0000 (15:29 +0000)]
packagegroup-sdk-gmae: remove GUPnP stack as it's no longer in oe-core
GUPnP is now in meta-multimedia, so remove it from this SDK packagegroup.
(From OE-Core rev:
356a5ee5a74f9cee112eac2c595c13ef707eca82)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 21 Jan 2013 15:29:30 +0000 (15:29 +0000)]
gupnp: remove, migrated to meta-multimedia
The GUPnP stack was stagnating in oe-core and untested. It's now moved to
meta-multimedia where it's also been upgraded.
(From OE-Core rev:
51e548a4e61709d9d87a424586529638873835b3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 21 Jan 2013 15:39:54 +0000 (15:39 +0000)]
site: add x86-32/64 alignment values for at-spi2-core
This package isn't yet in oe-core, but GTK+ 3.6 depends on it so will be here at
some point.
(From OE-Core rev:
8c46ec2edc0197b32d32e0f27d5b60271338b600)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 21 Jan 2013 12:32:13 +0000 (12:32 +0000)]
systemd: add missing patch headers
The reverts were by Koen and are literal revert commits, the uclibc patches were
mostly introduced by Khem.
(From OE-Core rev:
8925501890cbe630258d9c6fe348f1e3c821fc71)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 21 Jan 2013 12:15:34 +0000 (12:15 +0000)]
systemd: use new GTKDOC_DOCDIR and clean up
Now that gtk-doc.bbclass supports overriding the documentation directory,
systemd can just inherit gtk-doc and all of the manual operations can be
removed.
(From OE-Core rev:
8b7816804dcfdc380fbebe6dc8c81f431a7fc450)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 21 Jan 2013 12:15:33 +0000 (12:15 +0000)]
gtk-doc: parameterise the documentation directory
Not every package puts the gtk-doc infrastructure into ${S}, so allow this to be
overridden.
(From OE-Core rev:
40353c9ef83f986a0d49cc6eb654b3ace6ef4dc4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 21 Jan 2013 12:15:32 +0000 (12:15 +0000)]
systemd: fix typo in FILES
Accidently managed to corrupt FILES_udev.
(From OE-Core rev:
b1d8187f66d9646a53928fe288085f4605bc43ef)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 21 Jan 2013 12:15:31 +0000 (12:15 +0000)]
udev: skip in systemd distros, to fix world builds
(From OE-Core rev:
1179e43d67c96367480e563a36684d550d83fcbe)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 21 Jan 2013 12:15:30 +0000 (12:15 +0000)]
systemd: skip in non-systemd distros to fix world builds
(From OE-Core rev:
a2553b5f8b80ca0cd578afa2d2857ebb2b70ee3c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 21 Jan 2013 11:00:52 +0000 (11:00 +0000)]
bitbake: BBHandler/ConfHandler: Merge fix for multiline comments
This was meant to be squashed into the previous commit for multiline comment
handling. It fixes the case the commented multiline is followed by an empty
line which was resulting in a traceback instead of a sane error message.
(Bitbake rev:
7e7d692e244fe8dca533f842ca143b9c821e317c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 14 Dec 2012 13:53:32 +0000 (13:53 +0000)]
bitbake: bitbake: BBHandler/ConfHandler: Improve multiline comment handling
Faced with an expression like:
# Some comment \
FOO = "bar"
what should bitbake do? Technically, the \ character means its multiline and
currently the code treats this as a continuation of the comment. This can
surprise some people and is not intuitive.
This patch makes bitbake simply error and asks the user to be clearer
about what they mean.
(Bitbake rev:
589d31ce41e019ee6a7cb6527d67bc76c0b6382a)
(Bitbake rev:
79c00fabe08b4c210a3bd81cfaffbc47ffdc2e2b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Thu, 17 Jan 2013 13:16:37 +0000 (15:16 +0200)]
dbus: upgrade to 1.6.8
dbus, dbus-ptest upgraded to v1.6.8
(From OE-Core rev:
272661a7fca7e0ee8f6b0d7a4ba97f09a82a540e)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Sat, 19 Jan 2013 22:40:06 +0000 (14:40 -0800)]
boost: Upgrade 1.51 -> 1.52
Drop hash_enums.patch which is already applied upstream
(From OE-Core rev:
c4d3f5596662d6aced46f270f566b510a36e4952)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Sun, 20 Jan 2013 22:47:28 +0000 (22:47 +0000)]
gtk+3: refresh cross.patch
cross.patch was accepted upstream, so update this patch with the commit that was
merged.
(From OE-Core rev:
8e5ffa370c4259f925a0454fe7fd81c80ef2174b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Fri, 18 Jan 2013 23:13:52 +0000 (23:13 +0000)]
bb-matrix: Fix min and max calculations
The BB and PM ranges were originally intended to use leading 0s to
ensure all the values were the same string length, making for nice log
filenames and columnar dat files. However, not everyone will do this -
especially if it isn't documented.
Document the intent. Make the generation and parsing of dat files robust
to either method.
(From OE-Core rev:
90dc44c8246f2a580fe4a41ce28c201e52307500)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Matthew McClintock [Thu, 17 Jan 2013 20:23:23 +0000 (20:23 +0000)]
oprofile: backport patches to fix ppc build issues
Fixes:
| operf_utils.cpp: In function 'bool _op_get_event_codes(std::vector*)':
| operf_utils.cpp:151:21: error: 'pfm_initialize' was not declared in this scope
| operf_utils.cpp:151:26: error: 'PFM_SUCCESS' was not declared in this scope
| operf_utils.cpp:166:45: error: 'PFM_PLM3' was not declared in this scope
| operf_utils.cpp:166:55: error: 'PFM_OS_NONE' was not declared in this scope
| operf_utils.cpp:166:72: error: 'pfm_get_os_event_encoding' was not declared in this scope
| operf_utils.cpp:167:14: error: 'PFM_SUCCESS' was not declared in this scope
[YOCTO #3717]
(From OE-Core rev:
121cb96964fe2f374d814bf39036119bd63b9589)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Christopher Larson [Mon, 21 Jan 2013 02:34:26 +0000 (19:34 -0700)]
package.bbclass: drop unnecessary and broken packages.remove()
(From OE-Core rev:
5480371d0473482437ce4350e6593f006101ef40)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bogdan Marinescu [Mon, 14 Jan 2013 13:29:09 +0000 (15:29 +0200)]
oprofile: set correct kernel path
oprofile's "configure" was always looking at the configuration of the host
kernel, not the target kernel. This patch instructs oprofile to use the
target kernel to configure itself.
(From OE-Core rev:
5892db9a34c188b8a9bdaa86e19ba62a7f4793b5)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Sat, 19 Jan 2013 04:48:33 +0000 (20:48 -0800)]
rpm2cpio: Update to match rpm4 specs for decompression
[YOCTO #3753]
(From OE-Core rev:
1377278187d20853304fe2689105f2848d796d86)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Fri, 18 Jan 2013 23:13:38 +0000 (17:13 -0600)]
update-alternatives: Add a build-time dependency
We need to add a build time dependency on virtual/update-alternatives,
however we can't just do DEPENDS +=, or we end up with various problems. To
work around this, in the anonymous python space we ensure we only do the
addition when the package does not provide virtual/update-alternatives and
it is a target package.
Also the system wide PREFERRED_PROVIDER was incorrect. It references a
runtime package, and not the recipe it should have. This has been corrected.
[YOCTO #3691]
(From OE-Core rev:
56a59ef12936dcc6464cf1d43dda6957a5aa8c65)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Tested-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Fri, 18 Jan 2013 23:13:37 +0000 (17:13 -0600)]
populate_sdk_rpm: Re-add a few system provides to the SDK
When building the target SDK portion, we can safely ignore various
package rdepends. These dependencies are not required on a build
only environment like an SDK.
[YOCTO #3691]
(From OE-Core rev:
1edd44bed9e9829f7c2466928bc3f45be102b84b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Tested-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Fri, 18 Jan 2013 18:27:13 +0000 (12:27 -0600)]
scripts/lib/bsp/engine.py: add handling for JSON strings
Normally pre-canned properties are supplied as JSON from a file, which
the user can specify using e.g. the -i option.
We can reuse that basic functionality for dedicated command-line
parameters by sythesizing a JSON string containing those param values
on the fly and passing that in instead.
This adds the ability for the common creation code to accept JSON
strings as well as JSON files.
(From meta-yocto rev:
5a2e840b24822e018de94ec4f554363b59c4e8bd)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Fri, 18 Jan 2013 18:27:12 +0000 (12:27 -0600)]
yocto-layer: add optional layer priority param
If the user specifies a layer priority following the layer name, layer
creation will proceed without further queries using the specified
layer priority and the remaining values defaulted.
(From meta-yocto rev:
84a0bd8940f82fb938972d7b026367d40c9472e7)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Fri, 18 Jan 2013 18:27:11 +0000 (12:27 -0600)]
scripts/lib/bsp/engine.py: refactor bsp-creation code
This does a bit of refactoring of the bsp-generation code to make it
generically reusable for generating non-bsp layers.
The first user remains the existing yocto-bsp tool; these changes
allow a second user, the new yocto-layer tool, to use the same code.
(From meta-yocto rev:
1527a0ee7bce08a527c9d80516531b17816dff17)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Fri, 18 Jan 2013 18:27:10 +0000 (12:27 -0600)]
yocto-layer: add 'layer' template data
Add a 'layer' target containing all the data that will be used to
generate a generic yocto layer.
(From meta-yocto rev:
198a85f61ebd6435830285b2a9b1b925aea6779e)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Fri, 18 Jan 2013 18:27:09 +0000 (12:27 -0600)]
yocto-layer: add help/usage
This is essentially 'the documentation' for the yocto-layer tool.
(From meta-yocto rev:
34229b931bad8fc0e4d4431bb5cb46fccbea03bf)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Fri, 18 Jan 2013 18:27:08 +0000 (12:27 -0600)]
yocto-layer: new script
Implementation of the 'yocto-layer' command-line tool, for creating
generic layers and listing their input properties.
(From meta-yocto rev:
8170bea55379d1a25acc0fea108675526eeab6f6)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Fri, 18 Jan 2013 18:27:07 +0000 (12:27 -0600)]
scripts/lib/bsp/engine.py: add yocto_layer_create()
Add a new yocto_layer_create() function that will be used to generate
a generic yocto layer (for the new 'yocto-layer' command).
(From meta-yocto rev:
44acd01bf47c2e0a777e686c9339a6ff951fc972)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Riku Voipio [Fri, 18 Jan 2013 14:13:22 +0000 (16:13 +0200)]
attr: convert to generic syscall numbers
xattr system calls are old enough that we can switch
to just pulling the system call numbers from kernel
headers.
Upstream-Status: Submitted acl-devel@nongnu.org
(From OE-Core rev:
4dab91a4109a452f43483ef11ea9037ca8df1b33)
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Riku Voipio [Fri, 18 Jan 2013 14:13:21 +0000 (16:13 +0200)]
nspr: add aarch64 support
Add needed defines for Aarch64 support.
Upstream-Status: Submitted https://bugzilla.mozilla.org/show_bug.cgi?id=827271
(From OE-Core rev:
53b4f10bf7e8e83275a64da6700a52c5a4ba533d)
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 19 Jan 2013 23:31:37 +0000 (23:31 +0000)]
cpan_build: Fix bashism
Fix a build failure caused by a bashism and improve quoting whilst in
the area.
(From OE-Core rev:
9eb78340c61acddb0c2012e25c76c18735febb4d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 8 Jan 2013 10:43:32 +0000 (10:43 +0000)]
libtool-cross: Add missing libltdl components to install
Without this some software fails to build complaining it can't find these
utilities.
(From OE-Core rev:
db84eaf851b22b262d9dc48eb55bd5224a00fdd2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 16 Jan 2013 16:12:41 +0000 (16:12 +0000)]
liburi-perl: Add BBCLASSEXTEND for native version
(From OE-Core rev:
cac29d930910c257293ed2165faa5397f0a5d07c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 19 Jan 2013 23:29:08 +0000 (23:29 +0000)]
package.bbclass: Fix shlibs cross package-arch contamination
I found that if I had two packages architectures built (say core2 and i586),
that the shlibs data from i586 was being used in the core2 build. This
lead to odd dependency issues if the i586 build was out of date and core2
was being targetted.
When loading shlibs files, the last loaded wins so we need to iterate the
lists from least to strongest weighting, not the other way around. With this
patch applied, the contamination issue is resolved.
(From OE-Core rev:
acd7b1c2ee9f3ff84c45a723dba5e0bc5f6a100c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Holger Hans Peter Freyther [Fri, 18 Jan 2013 14:47:34 +0000 (15:47 +0100)]
dropbear: Deal with truncated host keys by removing them
Dropbear does not start when the host key is empty and it is possible
that a device is switched off before the host key is generated. This
is possible because the dropbearkey code doesn't create a temporary
file first. Detect truncated keys and then remove them which will lead
to the re-generation. This way the dropbear process will always start.
(From OE-Core rev:
16b57e352f5844f301cc6c7ea4f87bf750c11d67)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Sat, 19 Jan 2013 15:18:50 +0000 (09:18 -0600)]
populate_sdk_base.bbclass: Work around bugs with gnu tar < 1.24
The gnu tar versions less than 1.24 pose a problem with the SDK
extraction. A typical SDK will have hard links. The SDK is created
with a newer version of tar but extracted with the host version of tar
which may be much older. The specific defect is that older version of
gnu tar do not properly handle the "--strip-components=" argument when
processing hard links and the paths do not get properly truncated and
hooked up with the corresponding real file payloads. This leads to
errors like the following during the SDK install:
tar: sysroots/qemux86-yocto-linux/usr/bin/getconf: Cannot hard link to `./opt/yocto/SDK-qemux86/sysroots/qemux86-yocto-linux/usr/bin/POSIX_V6_ILP32_OFFBIG': No such file or directory
The simple way to work around the problem is to just not save the path
information that is going to get chopped off anyway. This has the
added benefit that it saves a small amount of space in the tar archive
as well.
(From OE-Core rev:
0f4112016bac07f0294f2a4d0fde4659c0fed2d2)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enrico Scholz [Sat, 19 Jan 2013 16:23:01 +0000 (17:23 +0100)]
package.bbclass: replace AUTOINC directly in PKGV
b27b438221e16ac3df6ac66d761b77e3bd43db67 introduced a regression when
PKGV is modified by the recipe. E.g. when having something like
| PV = "1.7.33+gitr${SRCPV}"
| PKGV = "1.7.33+gitr${GITPKGV}"
| RDEPENDS_${PN}-subpkg += "${PN} (= ${EXTENDPKGV})"
| inherit gitpkgv
The resulting core package has
| Version: 1.7.33+git234+cd01e8c-r11
and because the subpackage has
| Depends: vdr (= 1.7.33+git0+
cd01e8c18d494150730214f033f84e5282ce7639-r11)
image build fails with
| * satisfy_dependencies_for: Cannot satisfy the following dependencies ...
| * vdr (= 1.7.33+git0+
cd01e8c18d494150730214f033f84e5282ce7639-r11)
Patch avoids the 'PKGV = "cleanup(${PV})"' operation and replaces
AUTOINC directly within PKGV. This might introduce a regression too
when 'AUTOINC' is added to PKGV intentionally but impact is small and
can be fixed trivially by using another string.
(From OE-Core rev:
6e46664085fa49bc204fc944ca23ed6383e2ec51)
Signed-off-by: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de>
Cc: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Sun, 20 Jan 2013 05:28:30 +0000 (00:28 -0500)]
linux-yocto/3.4: update intel graphics features/configs
Updating the meta branch to import the following commits that cleanup and
reorganize the features that make up the graphics features of the Intel
BSPs
c0b3904 meta: add config fragment for gma600 graphics driver
f41638f meta: add config fragment for gma500 graphics driver
ff8ad3e meta: sys940x: drop vesa fragment from bsp config
fcb82ac meta: sys940x: remove emgd config from bsp config
c1677bb meta: fri2: drop vesa fragment from bsp config
7324440 meta: fri2: remove emgd config from bsp config
dd435c6 meta: emenlow: drop vesa fragment from bsp config
243b515 meta: emenlow: remove emgd config from bsp config
3e1be82 meta: crownbay: drop vesa fragment from bsp config
fc5ed4e meta: crownbay: remove emgd config from bsp config
d46236b meta: drm-emgd.cfg: add configs for dependent routines
db4bc5e meta: relocate git-merge of emgd branch
(From OE-Core rev:
8d0074ef2b61bf022ed1bb3b5f1afe526d8c921b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Sun, 20 Jan 2013 05:28:29 +0000 (00:28 -0500)]
linux-yocto/3.4: update to 3.4.26 and 3.4.25-rt37
Updating the yocto 3.4 kernel tree to the 3.4.25 and 3.4.26 -stable updates
as well as refreshing the preempt-rt branches to 3.4.25-rt37.
(From OE-Core rev:
da536703bdcf31c8c2ef17f5a49d06280fe77600)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Sat, 19 Jan 2013 22:40:05 +0000 (14:40 -0800)]
consolekit_0.4.5.bb: Package unpackaged systemd files
(From OE-Core rev:
8ac35f3bba5d00549f5255acf17a8be914402d50)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Sat, 19 Jan 2013 22:40:03 +0000 (14:40 -0800)]
kernel.bbclass, module-base.bbclass: Use CC to form KERNEL_CC
kernel compiler is not special and we currently have it so
we want to pass -march and -mtune options as CFLAGS to kernel
build so that compiler picks the right subarch flags when
compiling assembly files in particular. Otherwise defaults
are chosen which may not be right in many case e.g. when
compiling kernel for collie machine we should use arch=armv4
but it uses toolchain/as defaults which is armv5te
in some case e.g. thumb1 we know that kernel can not be compiled
in thumb1 mode so we can provide that information e.g. -marm
option through KERNEL_HOST_CC_ARCH variable as we do now
(From OE-Core rev:
c49f967384ccbfe131bbb33ee518014f3fc4b38f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Koen Kooi [Sat, 19 Jan 2013 22:47:13 +0000 (22:47 +0000)]
libpam: register PAM session with logind
This make screen/tmux/etc work as intended.
(From OE-Core rev:
58731bbdbd4ab4cfd560f14758a65efdfad2e28f)
Signed-off-by: Martin Donnelly <martin.donnelly@ge.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Sat, 19 Jan 2013 22:47:12 +0000 (22:47 +0000)]
packagegroup-core-boot: only install initscripts if we're using sysvinit
(From OE-Core rev:
9e7c64ca9afbf27edd0d35a1830ce55ee6d778ab)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Donnelly [Sat, 19 Jan 2013 22:47:11 +0000 (22:47 +0000)]
base-files: add fstab for systemd based systems
The default fstab has entries which are not necessary
in systemd based systems so add a simpler default in
this case.
(From OE-Core rev:
77bbb839ba25b974a538b90d346b454ccd5deefd)
Signed-off-by: Martin Donnelly <martin.donnelly@ge.com>
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Radu Moisan [Sat, 19 Jan 2013 22:47:10 +0000 (22:47 +0000)]
update-rc.d: disable update-rc.d.bbclass when systemd enabled
update-rc.d is not necessary when systemd is enabled,
systemctl is the replacement
(From OE-Core rev:
eaa82c842d3197e0251a887ba16028c22f9d8d94)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Sat, 19 Jan 2013 22:47:09 +0000 (22:47 +0000)]
packagegroup-core-boot: install systemd-compat-units on systemd images
systemd-compat-units is needed to run postinsts for example.
(From OE-Core rev:
cf783377767c70db544da57593616cfc952dbfb9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Radu Moisan [Sat, 19 Jan 2013 22:47:08 +0000 (22:47 +0000)]
default-providers: Add systemd option to PREFERRED_PROVIDER_udev
(From OE-Core rev:
fb8e5285bbc6d5aac5d4103c0a983b7b6c54d73d)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Radu Moisan [Sat, 19 Jan 2013 22:47:07 +0000 (22:47 +0000)]
systemd: add systemd recipes
Add systemd recipes and associated support recipes.
Mostly based on meta-oe/meta-systemd, so almost all credit should go to:
Andreas Müller <schnitzeltony@googlemail.com>
Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Holger Hans Peter Freyther <holger@moiji-mobile.com>
Khem Raj <raj.khem@gmail.com>
Koen Kooi <koen@dominion.thruhere.net>
Martin Jansa <Martin.Jansa@gmail.com>
(From OE-Core rev:
6a8a48b4d0d0b9b8d8af46cae11245bcb870bbc3)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Sat, 19 Jan 2013 22:47:06 +0000 (22:47 +0000)]
dbus: respect systemd distro feature
Only configure for systemd if we are using systemd, and remove the dbus-systemd
package by putting the service files into PN itself.
(From OE-Core rev:
06e262c9b4c406b886db6ca8eee55ab441599151)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Radu Moisan [Sat, 19 Jan 2013 22:47:05 +0000 (22:47 +0000)]
default-providers: Automatically set PREFERRED_PROVIDER_udev
This is a more generic way to set preferred provider for udev.
We expect to have multiple choices once we integrate other init
managers, and this way we can automatically set it considering
distro settings.
(From OE-Core rev:
da13562af73d144b5782ee8d755e2249cd9d2d8c)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Radu Moisan [Sat, 19 Jan 2013 22:47:04 +0000 (22:47 +0000)]
default-distrovars: Add DISTRO_FEATURES_INITMAN to DISTRO_FEATURES
This is a more generic way to set the init manager since we
plan to support other init managers as well.
I will use this variable as a switch to turn on/off any
init scheme that we might support in the future.
By default we use sysvinit.
(From OE-Core rev:
87f06346728bda000c0c0f95312b6a0a1b149ab4)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 18 Jan 2013 05:19:32 +0000 (00:19 -0500)]
guilt: add git 1.8.x support
Updating guilt to allow git 1.8.x as a supported version. This version has
no impact on other functionality within the scripts, so no other adjustments
are necessary.
[YOCTO #3275]
(From OE-Core rev:
18bc7b44ef58cbcbe32d45504d71eed54ef695a4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 18 Jan 2013 05:19:31 +0000 (00:19 -0500)]
linux-yocto/3.4: integrate LTSI-3.4
Updating the linux-yocto-3.4 SRCREVS to activate the merge of the 3.4.25-ltsi
tree:
http://git.linuxfoundation.org/?p=ltsi-kernel.git;a=tag;h=refs/tags/v3.4.25-ltsi
The pristine patch queue can be seen on the "ltsi" branch in the repository.
This branch has been merged into the standard/base branch of linux-yocto-3.4
and to all BSP branches in the tree.
LTSI based BSPs or features are not activated as part of this commit, they
are controlled by the meta branch of the kernel repository and are activated
in separate patches.
[YOCTO #2396]
(From OE-Core rev:
8f03ebe9b164e0c0493c56d9eb2e7d0b039832f1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 18 Jan 2013 05:19:30 +0000 (00:19 -0500)]
linux-yocto/routerstationpro: enable GPIO_SYSFS
We had a request to enable GPIO_SYSFS to allow easy use of the available
GPIOs in the board out of the box. This is a simple / contained config item
to enable, so there's no reason not to.
[YOCTO #3519]
(From OE-Core rev:
9a5948ff07b62f54d6215d37e9028384d3b430da)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 18 Jan 2013 05:19:29 +0000 (00:19 -0500)]
linux-yocto/meta: update include statements to explicit .scc format
The kernel tooling can support a "shorthand" method of including other features
that doesn't require the full filename ending in .scc. This format is confusing
when compared to the source tree, and is inconsitently use. This commit updates
all shorthand includes to a full "include <foo>.scc" format.
[YOCTO #3418]
(From OE-Core rev:
acf015f079907da8a4f1b80e44bb64bc7696a6ad)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 18 Jan 2013 05:19:28 +0000 (00:19 -0500)]
kernel-yocto: add KBUILD_OUTPUT to OE_TERMINAL_EXPORTS
Since linux-yocto based recipes have a split build and source directory,
we should export KBUILD=${B} to the devshell. This allows the kernel to
be incrementally build within the shell and not dirty the source
directory (which breaks subsequent full builds).
(From OE-Core rev:
88f88a22dfa730161168b0f228e3954178b74c6a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 18 Jan 2013 05:19:27 +0000 (00:19 -0500)]
linux-yocto: normalize repository naming and SRC_URI options
linux-yocto-tiny and linux-yocto had minor differences from the rest
of the linux-yocto recipes. After this commit, all the recipes are
using bareclone=1 and repository names that end with .git.
(From OE-Core rev:
1acf3ad17bbc1cdcad31c243b7b50daaea99ee7a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 18 Jan 2013 05:19:26 +0000 (00:19 -0500)]
kernel-yocto: remove unnecessary non-bare warning
In the past working from a non-bare clone would cause problems,
due to branches not existing in the WORKDIR clone. This hasn't
been true for some time, since the routines which convert remotes
into local branches have been functioning without problems.
So we no longer need the warning and it can be removed.
(From OE-Core rev:
42d42c24a37af0ea8896087c7cc8215eb19f633d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>