drm/i915: Check for IVB instead of gen7 when we think about IVB CPU eDP

Almost all of the GEN7 checks in the DP code are actually looking for
IVB. HSW doesn't even take these codepaths, and VLV is excluded on
account of not having port A. So let's change the checks to IS_IVB to
make the code less confusing.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517170309.28630-3-ville.syrjala@linux.intel.com

drm/i915: Use the same vswing->max_preemph mapping on HSW/BDW as on SKL+

All DDI platforms support the full set of preemph settings for each
supported vswing, so let's use the same code for them. We'll also move
the code into intel_ddi.c so that it sits closer to the actual buf trans
tables.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517170309.28630-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Use intel_ddi_dp_voltage_max() for HSW/BDW too

Use intel_ddi_dp_voltage_max() for HSW/BDW too instead of letting these
fall through the if ladder in a weird way. This function will look at
the actual buf trans tables we have for HSW/BDW to determine the max
vswing level.

It looks to me like the current code leads HSW port A down the IVB port
A path, HSW port B+ and BDW fall through to the very end. Both cases do
result in the correct max vswing level 2, but it's very hard to see that
from the code.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517170309.28630-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Disable LVDS on Radiant P845

Radiant P845 does not have LVDS, only VGA.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105468
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180309222204.4771-1-linux@rainbow-software.org

drm/i915: Pull the context->pin_count dec into the common intel_context_unpin

As all backends implement the same pin_count mechanism and do a
dec-and-test as their first step, pull that into the common
intel_context_unpin(). This also pulls into the caller, eliminating the
indirect call in the usual steady state case. The intel_context_pin()
side is a little more complicated as it combines the lookup/alloc as
well as pinning the state, and so is left for a later date.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-4-chris@chris-wilson.co.uk

drm/i915: Store a pointer to intel_context in i915_request

To ease the frequent and ugly pointer dance of
&request->gem_context->engine[request->engine->id] during request
submission, store that pointer as request->hw_context. One major
advantage that we will exploit later is that this decouples the logical
context state from the engine itself.

v2: Set mock_context->ops so we don't crash and burn in selftests.
    Cleanups from Tvrtko.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-3-chris@chris-wilson.co.uk

drm/i915: Move fiddling with engine->last_retired_context

Move the knowledge about resetting the current context tracking on the
engine from inside i915_gem_context.c into intel_engine_cs.c

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-2-chris@chris-wilson.co.uk

drm/i915: Move request->ctx aside

In the next patch, we want to store the intel_context pointer inside
i915_request, as it is frequently access via a convoluted dance when
submitting the request to hw. Having two context pointers inside
i915_request leads to confusion so first rename the existing
i915_gem_context pointer to i915_request.gem_context.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-1-chris@chris-wilson.co.uk

drm/i915: enable the pipe/transcoder/planes later on HSW+

For all platforms that run haswell_crtc_enable, our spec tells us to
configure the transcoder clocks and do link training before it tells
us to set pipeconf and the other pipe/transcoder/plane registers.

Starting from Icelake, we get machine hangs if we try to touch the
pipe/transcoder registers without having the clocks configured and not
having some chicken bits set. So this patch changes
haswell_crtc_enable() to issue the calls at the appropriate order
mandated by the spec.

While setting the appropriate chicken bits would also work here, it's
better if we actually program the hardware the way it is intended to
be programmed. And the chicken bit also has some theoretical downsides
that may or may not affect us. Also, correctly programming the
hardware does not prevent us from setting the chicken bits in a later
patch in case we decide to.

v2: Don't forget link training (Ville).

Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502215851.30736-1-paulo.r.zanoni@intel.com

drm/i915/icl: Read the correct Gen11 interrupt registers

Stop reading some now deprecated interrupt registers in both
debugfs and error state. Instead, read the new equivalents in the
Gen11 interrupt repartitioning scheme.

Note that the equivalent to the PM ISR & IIR cannot be read without
affecting the current state of the system, so I've opted for leaving
them out. See gen11_reset_one_iir() for more info.

v2: else if !!! (Paulo)
v3: another else if (Vinay)
v4:
  - Rebased
  - Renamed patch
  - Improved the ordering of GENs
  - Improved the printing of per-GEN info
v5: Avoid maybe-unitialized & add comment explaining the lack
    of PM ISR & IIR

Suggested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
[Paulo: fix commit message and coding style.]
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525989595-18220-1-git-send-email-oscar.mateo@intel.com

drm/i915: Remove unused enable_cmd_parser modparam

The command parser is feature complete, stable and required by
userspace. In commit 41736a8e3331 ("drm/i915: Use the precomputed value
for whether to enable command parsing") I accidentally removed control
from the modparam, and as no one has complained, remove the left
over modparam completely!

References: 41736a8e3331 ("drm/i915: Use the precomputed value for whether to enable command parsing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517150727.10431-1-chris@chris-wilson.co.uk

drm/i915: Nul-terminate legacy debug string

Make sure that when we don't have any scheduler attributes for the
request, the string is terminated.

Fixes: 247870ac8ea7 ("drm/i915: Build request info on stack before printk")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517152824.11619-1-chris@chris-wilson.co.uk

drm/i915/execlists: HWACK checking superseded checking port[0].count

The HWACK bit more generically solves the problem of resubmitting ESLP
while the hardware is still processing the current ELSP write. We no
longer need to check port[0].count itself.

References: ba74cb10c775 ("drm/i915/execlists: Delay writing to ELSP until HW has processed the previous write")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517115647.17205-1-chris@chris-wilson.co.uk

drm/i915: Clean up DVO pipe select bits

Parametrize the DVO pipe select bits.

For consistency with the new way of doing things, let's read out the
pipe select bits even when the port is disable, even though we don't
need that behaviour for asserts in this case.

v2: Order the defines shift,mask,value (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514172423.9302-5-ville.syrjala@linux.intel.com

drm/i915: Clean up TV pipe select bits

Parametrize the TV pipe select bits.

For consistency with the new way of doing things, let's read out the
pipe select bits even when the port is disable, even though we don't
need that behaviour for asserts in this case.

v2: Order the defines shift,mask,value (Jani)
    Clear the stale pipe select bit in load detection (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514172423.9302-4-ville.syrjala@linux.intel.com

drm/i915: Clean up SDVO pipe select bits

Clean up the SDVO pipe select bits. To make the whole situation a bit
less ugly we'll start to share the same code between .get_hw_state()
and the port state asserts.

v2: Order the defines shift,mask,value (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514172423.9302-3-ville.syrjala@linux.intel.com

drm/i915: Clean up LVDS pipe select bits

Clean up the LVDS pipe select bits. To make the whole situation a bit
less ugly we'll start to share the same code between .get_hw_state()
and the port state asserts.

v2: Order the defines shift,mask,value (Jani)
    Drop ruperfluous braces and whitesapce changes (Jani)
    Combine masks in compute_is_dual_link_lvds() (Jani)
v3: Fix LVDS_PIPE_SEL_MASK_CPT

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514182827.28629-1-ville.syrjala@linux.intel.com

drm/i915: Clean up ADPA pipe select bits

Clean up the ADPA pipe select bits. To make the whole situation a bit
less ugly we'll start to share the same code between .get_hw_state()
and the port state asserts.

v2: Order the defines shift,mask,value (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514172423.9302-1-ville.syrjala@linux.intel.com

drm/i915: Stop parking the signaler around reset

We cannot call kthread_park() from softirq context, so let's avoid it
entirely during the reset. We wanted to suspend the signaler so that it
would not mark a request as complete at the same time as we marked it as
being in error. Instead of parking the signaling, stop the engine from
advancing so that the GPU doesn't emit the breadcrumb for our chosen
"guilty" request.

v2: Refactor setting STOP_RING so that we don't have the same code thrice

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michałt Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-8-chris@chris-wilson.co.uk

drm/i915/execlists: Flush pending preemption events during reset

Catch up with the inflight CSB events, after disabling the tasklet
before deciding which request was truly guilty of hanging the GPU.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-7-chris@chris-wilson.co.uk

drm/i915/execlists: Split out CSB processing

Pull the CSB event processing into its own routine so that we can reuse
it during reset to flush any missed interrupts/events.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-6-chris@chris-wilson.co.uk

drm/i915: Split execlists/guc reset preparations

In the next patch, we will make the execlists reset prepare callback
take into account preemption by flushing the context-switch handler.
This is not applicable to the GuC submission backend, so split the two
into their own backend callbacks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-5-chris@chris-wilson.co.uk

drm/i915: Move engine reset prepare/finish to backends

In preparation to more carefully handling incomplete preemption during
reset by execlists, we move the existing code wholesale to the backends
under a couple of new reset vfuncs.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-4-chris@chris-wilson.co.uk

drm/i915/execlists: Refactor out complete_preempt_context()

As a complement to inject_preempt_context(), follow up with the function
to handle its completion. This will be useful should we wish to extend
the duties of the preempt-context for execlists.

v2: And do the same for the guc.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-3-chris@chris-wilson.co.uk

drm/i915: Only sync tasklets once for recursive reset preparation

When setting up reset, we may need to recursively prepare an engine. In
which case we should only synchronously flush the tasklets on the outer
most call, the inner calls will then be inside an atomic section where
the tasklet will never be run (and so the sync will never complete).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-2-chris@chris-wilson.co.uk

drm/i915: Remove tasklet flush before disable

The idea was to try and let the existing tasklet run to completion
before we began the reset, but it involves a racy check against anything
else that tries to run the tasklet. Rather than acknowledge and ignore
the race, let it be and don't try and be too clever.

The tasklet will resume execution after reset (after spinning a bit
during reset), but before we allow it to resume we will have cleared all
the pending state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-1-chris@chris-wilson.co.uk

drm/i915/dp: fix spelling mistakes: "seqeuncer" and "seqeuencer"

Trivial fix to spelling mistakes in WARN warning message text and
in comments:

"seqeuncer", "seqeuencer" -> "sequencer"

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509101606.17483-1-colin.king@canonical.com

drm/i915: Shrink search list for active timelines

When switching to the kernel context, we force the switch to occur after
all currently active requests (so that we know the GPU won't switch
immediately away and the kernel context remains current as we work). To
do so we have to inspect all the timelines and add a fence from the
active work to queue our switch afterwards. We can use the tracked set
of active rings to shrink our search for active timelines.

v2: Use a local to shrink the list_for_each_entry()

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180515143149.4795-1-chris@chris-wilson.co.uk

drm/i915: Update DRIVER_DATE to 20180514

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Mark up nested spinlocks

When we process the outstanding requests upon banning a context, we need
to acquire both the engine and the client's timeline, nesting the locks.
This requires explicit markup as the two timelines are now of the same
class, since commit a89d1f921c15 ("drm/i915: Split i915_gem_timeline into
individual timelines").

Testcase: igt/gem_eio/banned
Fixes: a89d1f921c15 ("drm/i915: Split i915_gem_timeline into individual timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180512084957.9829-1-chris@chris-wilson.co.uk

drm/i915/execlists: Relax CSB force-mmio for VT-d

The original switch to use CSB from the HWSP was plagued by the effect
of read ordering on VT-d; we would read the WRITE pointer from the HWSP
before it had completed writing the CSB contents. The mystery comes down
to the lack of rmb() for correct ordering with respect to the writes
from HW, and with that resolved we can remove the VT-d special casing.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-3-chris@chris-wilson.co.uk
Tested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

Merge tag 'gvt-next-2018-05-14' of https://github.com/intel/gvt-linux into drm-intel-next-queued

- Improve the emulation of virtual non-priv register. (Yan)
- Reverse the hack of host of preeption of GVT-g. (Weinan)
- Improve untracked warning message.(Changbin)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ebae7cf1-6550-bb44-74a2-d3a014051804@intel.com

Revert "drm/i915/gvt: set max priority for gvt context"

This reverts commit 11474e9091cf2002e948647fd9f63a7f027e488a.

There are issues which will block the host preemption before, instead of
disabling it use one workaround "setting max priority for gvt context"
to avoid the gvt context be preempted by the host. Now the issues have been
cleared, so revert this patch to enable host preemption.

v2:
- refine description(Zhenyu)

Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Merge branch 'drm-intel-next-queued' into gvt-next

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: let force_to_nonpriv cmd handler only valid for LRI cmd

the cmd_reg_handler() is called by cmds LRM, PIPE_CTRL, SRM...
for LRM, SRM, we cannot get write data in a simple way.
On other side,  the force_to_nonpriv reigsters will only be written in LRI
in current drivers. so we don't want to bother the handler to handle those
memory access cmds, just leave a print message here.

Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: do not return error on handling force_to_nonpriv registers

Return error will cause vm hang and enter failsafe mode.
However, we don't want that happen on detecting an wrong force_to_nonpriv
register write.
Therefore, we just omit the wrong write or patch it to default value.

v2: only return 0 on detecting lri write of registers outside whitelist,
but still return error on other error conditions.  (zhenyu wang)

Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Reviewed-by: Zhang Yulei <yulei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: let NOPID be the default value of force_to_nonpriv registers

Each ring has a NOPID register and currently they are regarded as default
value of force_to_nonpriv registers in guest drivers

Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Remove disable_warn_untrack and print untracked mmio with debug level

The disable_warn_untrack never prevent gvt from printing untracked
mmio errors. We were disturbed by this error storm and the fix is
just adding them to the list with no essential new change.

This message is only useful for enabling new platform during
developing process. So lower the message level to debug and then
remove disable_warn_untrack.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gen9: Add WaClearHIZ_WM_CHICKEN3 for bxt and glk

Factor in clear values wherever required while updating destination
min/max.

References: HSDES#1604444184
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: mesa-dev@lists.freedesktop.org
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180510200708.18097-1-michel.thierry@intel.com
Cc: stable@vger.kernel.org

drm/i915/selftests: scrub 64K

We write all 4K page entries, even when using 64K pages. In order to
verify that the HW isn't cheating by using the 4K PTE instead of the 64K
PTE, we want to remove all the surplus entries. If the HW skipped the
64K PTE, it will read/write into the scratch page instead - which we
detect as missing results during selftests.

v2: much improved commentary (Chris)

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Changbin Du <changbin.du@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511095140.25590-1-matthew.auld@intel.com

drm/i915/oa: Check that OA is disabled before unpinning

Before we unpin the buffer used for OA reports and return it to the
system, we need to be sure that the HW has finished writing into it.
For lack of a better idea, poll OACONTROL to check it is switched off.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106379
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511135207.12880-1-chris@chris-wilson.co.uk

Revert "drm/i915/cnl: Use mmio access to context status buffer"

In the previous patch (to include a rmb() after readig the CSB WRITE
pointer from the HWSP) we believe we have fixed the underlying bug, and
so can re-enable using the HWSP on Cannolake.

This reverts commit 61bf9719fa17 ("drm/i915/cnl: Use mmio access to
context status buffer").

References: https://bugs.freedesktop.org/show_bug.cgi?id=105888
References: https://bugs.freedesktop.org/show_bug.cgi?id=106185
References: 61bf9719fa17 ("drm/i915/cnl: Use mmio access to context status buffer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-2-chris@chris-wilson.co.uk

drm/i915/execlists: Use rmb() to order CSB reads

We assume that the CSB is written using the normal ringbuffer
coherency protocols, as outlined in kernel/events/ring_buffer.c:

    *   (HW)                              (DRIVER)
    *
    *   if (LOAD ->data_tail) {            LOAD ->data_head
    *                      (A)             smp_rmb()       (C)
    *      STORE $data                     LOAD $data
    *      smp_wmb()       (B)             smp_mb()        (D)
    *      STORE ->data_head               STORE ->data_tail
    *   }

So we assume that the HW fulfils its ordering requirements (B), and so
we should use a complimentary rmb (C) to ensure that our read of its
WRITE pointer is completed before we start accessing the data.

The final mb (D) is implied by the uncached mmio we perform to inform
the HW of our READ pointer.

References: https://bugs.freedesktop.org/show_bug.cgi?id=105064
References: https://bugs.freedesktop.org/show_bug.cgi?id=105888
References: https://bugs.freedesktop.org/show_bug.cgi?id=106185
Fixes: 767a983ab255 ("drm/i915/execlists: Read the context-status HEAD from the HWSP")
References: 61bf9719fa17 ("drm/i915/cnl: Use mmio access to context status buffer")
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-1-chris@chris-wilson.co.uk

drm/i915/icl: WaForwardProgressSoftReset

Avoids a hang during soft reset.

v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
  - Rebased
  - C, not lisp (Chris)
  - Which steppings affected by this are not clear.
    For the moment, apply unconditionally as per the
    BSpec (Mika)
  - Add reference to another HSD also related

References: HSDES#1405476379
References: HSDES#2006612137
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-14-git-send-email-oscar.mateo@intel.com

drm/i915/icl: Wa_1406838659

Disable CGPSF unit clock gating to prevent an issue.

v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
  - Rebased
  - C, not lisp (Chris)
  - Remove unintentional whitespaces (Mika)
  - Fixed in C0 (Mika)

References: HSDES#1406838659
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-13-git-send-email-oscar.mateo@intel.com

drm/i915/icl: Wa_1604302699

Disable I2M Write for performance reasons.

v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
  - Rebased
  - C, not lisp (Chris)
  - GEN7 chicken bit in the wrong side of the fence (Mika)
  - Use two spaces to align bit macros

References: HSDES#1604302699
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-12-git-send-email-oscar.mateo@intel.com

drm/i915/icl: Wa_1406680159

Disable GWL clock gating to prevent an issue that might
cause hangs.

v2: Rebased on top of the WA refactoring
v3: Wa_2201832410 officially merged with Wa_1406680159
v4: Added References (Mika)
v5:
  - Rebased
  - C, not lisp (Chris)
  - Add reference where WA is better explained (Rodrigo)
  - Add reference to WA that got merged with this

References: HSDES#1406681710
References: HSDES#1406680159
References: HSDES#2201832410
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-11-git-send-email-oscar.mateo@intel.com

drm/i915/icl: Wa_1405779004

Disable MSC clock gating to prevent data corruption.

BSpec: 19257

v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
  - Rebased
  - C, not lisp (Chris)
  - A0 only (Mika)

References: HSDES#1405779004
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-10-git-send-email-oscar.mateo@intel.com

drm/i915/icl: WaDisCtxReload

Revert to the legacy implementation to avoid a system hang.

v2: Correct the address for GAMW_ECO_DEV_RW_IA_REG
v3: Renamed to Wa_220166154
v4: Rebased on top of the WA refactoring
v5: Added References (Mika)
v6:
  - Rebased
  - C, not lisp (Chris)

References: HSDES#220166154
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-9-git-send-email-oscar.mateo@intel.com

drm/i915/icl: WaCL2SFHalfMaxAlloc

This workarounds an issue with insufficient storage for the
CL2 and SF units.

v2: Renamed to Wa_1405766107
v3: Wrapped the commit message
v4: Rebased on top of the WA refactoring
v5: Added References (Mika)
v6:
  - Rebased
  - s/MACALLOC/MAXALLOC (Mika)
  - C, not lisp (Chris)

References: HSDES#1405766107
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-8-git-send-email-oscar.mateo@intel.com

drm/i915/icl: WaDisableCleanEvicts

Avoids an undefined LLC behavior.

BSpec: 9613

v2: Renamed to Wa_1405733216
v3: Spaces around '<<' and fix surrounding code
v4: Rebased on top of the WA refactoring
v5: Added References (Mika)
v6:
  - Rebased
  - C, not lisp (Chris)

References: HSDES#1405733216
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-7-git-send-email-oscar.mateo@intel.com

drm/i915/icl: WaModifyGamTlbPartitioning

Adjust default GAM TLB partitioning for performance reasons.

v2: Only touch the bits that we really need
v3: Rebased on top of the WA refactoring
v4:
  - Added References (Mika)
  - Rebased
v5:
  - Rebased
  - C, not lisp (Chris)
  - Correct reference number (Mika)

References: HSDES#220160670
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-6-git-send-email-oscar.mateo@intel.com

drm/i915/icl: WaL3BankAddressHashing

Revert to an L3 non-hash model, for performance reasons.

v2:
  - Place the WA name above the actual change
  - Improve the register naming
v3:
  - Rebased
  - Renamed to Wa_1604223664
v4: Rebased on top of the WA refactoring
v5:
  - Added References (Mika)
  - Fixed wrong mask and value (Mika)
  - Do not apply together with another WA for the same
    register (not worth the hassle)
v6:
  - Rebased
  - C, not lisp (Chris)

References: HSDES#1604223664
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-5-git-send-email-oscar.mateo@intel.com

drm/i915/icl: WaGAPZPriorityScheme

The default GAPZ arbitrer priority value at power-on has been found
to be incorrect.

v2: Now renamed to Wa_1405543622
v3: Rebased on top of the WA refactoring
v4: Added HSDES reference number (Mika)
v5:
  - Rebased
  - C, not lisp (Chris)

References: HSDES#1405543622
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-4-git-send-email-oscar.mateo@intel.com

drm/i915/icl: Enable Sampler DFR

Sampler Dynamic Frequency Rebalancing (DFR) aims to reduce Sampler
power by dynamically changing its clock frequency in low-throughput
conditions. This patches enables it by default on Gen11.

v2: Wrong operation to clear the bit (Praveen)
v3: Rebased on top of the WA refactoring
v4: Move to icl_init_clock_gating, since it's not a WA (Rodrigo)
v5: C, not lisp (Chris)

Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Praveen Paneri <praveen.paneri@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-3-git-send-email-oscar.mateo@intel.com

drm/i915/icl: Introduce initial Icelake Workarounds

Inherit workarounds from previous platforms that are still valid for
Icelake.

v2: GEN7_ROW_CHICKEN2 is masked
v3:
  - Since it has been fixed already in upstream, removed the TODO
    comment about WA_SET_BIT for WaInPlaceDecompressionHang.
  - Squashed with this patch:
      drm/i915/icl: add icelake_init_clock_gating()
    from Paulo Zanoni <paulo.r.zanoni@intel.com>
  - Squashed with this patch:
      drm/i915/icl: WaForceEnableNonCoherent
    from Oscar Mateo <oscar.mateo@intel.com>
  - WaPushConstantDereferenceHoldDisable is now Wa_1604370585 and
    applies to B0 as well.
  - WaPipeControlBefore3DStateSamplePattern WABB was being applied
    to ICL incorrectly.
v4:
  - Wrap the commit message
  - s/dev_priv/p to please checkpatch
v5: Rebased on top of the WA refactoring
v6: Rebased on top of further whitelist registers refactoring (Michel)
v7: Added WaRsForcewakeAddDelayForAck
v8: s/ICL_HDC_CHICKEN0/ICL_HDC_MODE (Mika)
v9:
  - C, not lisp (Chris)
  - WaIncreaseDefaultTLBEntries is the same for GEN > 9_LP (Tvrtko)

Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-2-git-send-email-oscar.mateo@intel.com

drm/i915/gtt: Trust the uncached store to flush wcb

Not all architectures guarantee that uncached read will
flush the write combining buffer. So marking it explicitly
is recommended [1].

However we know the architecture we are operating on
and can avoid wmb as the UC store will flush the wcb [2].

Omit the wmb() before invalidate as redudant.

v2: squash combining and removal (Chris)
v3: remove obsolete comments about posting reads (Chris)

References: http://yarchive.net/comp/linux/write_combining.html [1]
References: http://download.intel.com/design/PentiumII/applnots/24442201.pdf [2]
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508124154.14586-1-mika.kuoppala@linux.intel.com

drm/i915: Add NV12 as supported format for sprite plane

This patch adds NV12 to list of supported formats for sprite plane.

v2: Rebased (me)

v3: Review comments by Ville addressed
- Removed skl_plane_formats_with_nv12 and added
NV12 case in existing skl_plane_formats
- Added the 10bpc RGB formats

v4: Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches?
Trying to set XR30 or AB30 results in error returned even though
the modes are advertised for the planes"
- Removed 10bit RGB formats added previously with NV12 series

v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches?
Trying to set XR30 or AB30 results in error returned even though
the modes are advertised for the planes"
- Previous version has 10bit RGB format removed from VLV formats
by mistake. Fixing that in this version.
Removed 10bit RGB formats added previously with NV12 series
for SKL.

v6: Addressed review comments by Ville
Restricting the NV12 to BXT and PIPE A and B

v7: Rebased (me)

v8: Rebased (me)
Restricting NV12 changes to BXT and KBL
Restricting NV12 changes for plane 0 (overlay)

v9: Rebased (me)

v10: Addressed review comments from Maarten.
Adding NV12 to skl_plane_formats itself.

v11: Addressed review comments from Shashank Sharma

v12: Addressed review comments from Shashank Sharma
Made the condition in intel_sprite_plane_create
simple and easy to read as suggested.

v13: Adding reviewed by tag from Shashank Sharma
Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"

v14: Addressed review comments from Ville
Added skl_planar_formats to include NV12
and a check skl_plane_has_planar in sprite create
Added NV12 format to skl_mod_supported. These were
review comments from Kristian Høgsberg <hoegsberg@gmail.com>

v15: Added reviewed by from Juha-Pekka Heikkila

v16: Rebased the series

v17: Added all tiling under mod supported for NV12
Credits to Megha Aggarwal

v18: Added RB by Maarten and Kristian

v19: Addressed review comments from Maarten
Made modification to skl_mod_supported

Credits-to: Megha Aggarwal <megha.aggarwal@intel.com>
Credits-to: Kristian Høgsberg <hoegsberg@gmail.com>
Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-7-git-send-email-vidya.srinivas@intel.com

drm/i915: Add NV12 as supported format for primary plane

This patch adds NV12 to list of supported formats for
primary plane

v2: Rebased (Chandra Konduru)

v3: Rebased (me)

v4: Review comments by Ville addressed
Removed the skl_primary_formats_with_nv12 and
added NV12 case in existing skl_primary_formats

v5: Rebased (me)

v6: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v7: Review comments by Ville addressed
Restricting the NV12 for BXT and on PIPE A and B
Rebased (me)

v8: Rebased (me)
Modified restricting the NV12 support for both BXT and KBL.

v9: Rebased (me)

v10: Addressed review comments from Maarten.
Adding NV12 inside skl_primary_formats itself.

v11: Adding Reviewed By tag from Shashank Sharma

v12: Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"

v13: Addressed review comments from Ville
Added skl_pri_planar_formats to include NV12
and skl_plane_has_planar function to check for
NV12 support on plane. Added NV12 format to
skl_mod_supported. These were review comments
from Kristian Høgsberg <hoegsberg@gmail.com>

v14: Added reviewed by from Juha-Pekka Heikkila

v15: Rebased the series

v16: Added all tiling support under mod supported
for NV12. Credits to Megha Aggarwal

v17: Added RB by Maarten and Kristian

v18: Review comments from Maarten addressed -
Removing BROXTON support for NV12 due to WA826

v19: Addressed review comments from Maarten
Make changes to skl_mod_supported

Credits-to: Megha Aggarwal megha.aggarwal@intel.com
Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-6-git-send-email-vidya.srinivas@intel.com

drm/i915: Add NV12 support to intel_framebuffer_init

This patch adds NV12 as supported format
to intel_framebuffer_init and performs various checks.

v2:
-Fix an issue in checks added (Chandra Konduru)

v3: rebased (me)

v4: Review comments by Ville addressed
Added platform check for NV12 in intel_framebuffer_init
Removed offset checks for NV12 case

v5: Addressed review comments by Clinton A Taylor
This NV12 support only correctly works on SKL.
Plane color space conversion is different on GLK and later platforms
causing the colors to display incorrectly.
Ville's plane color space property patch series
in review will fix this issue.
- Restricted the NV12 case in intel_framebuffer_init to
SKL and BXT only.

v6: Rebased (me)

v7: Addressed review comments by Ville
Restricting the NV12 to BXT for now.

v8: Rebased (me)
Restricting the NV12 changes to BXT and KBL for now.

v9: Rebased (me)

v10: NV12 supported by all GEN >= 9.
Making this change in intel_framebuffer_init. This is
part of addressing Maarten's review comments.
Comment under v8 no longer applicable

v11: Addressed review comments from Shashank Sharma

v12: Adding Reviewed By from Shashank Sharma

v13: Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"

v14: Addressed review comments from Maarten.
Add checks for fb width height for NV12 and fail the fb
creation if check fails. Added reviewed by from
Juha-Pekka Heikkila

v15: Rebased the series

v16: Setting the minimum value during fb creating to 16
as per Bspec for NV12. Earlier minimum was expected
to be > 16. Now changed it to >=16.

v17: Adding restriction to framebuffer_init - the fb
width and height should be a multiplier of 4

v18: Added RB from Maarten. Included Maarten's review comments
Dont allow CCS formats for fb creation of NV12

v19: Review comments from Maarten addressed -
Removing BROXTON support for NV12 due to WA826

Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-5-git-send-email-vidya.srinivas@intel.com

drm/i915: Add skl_check_nv12_surface for NV12

We skip src trunction/adjustments for
NV12 case and handle the sizes directly.
Without this, pipe fifo underruns are seen on APL/KBL.

v2: For NV12, making the src coordinates multiplier of 4

v3: Moving all the src coords handling code for NV12
to skl_check_nv12_surface

v4: Added RB from Mika

v5: Rebased the series. Removed checks of mult of 4 in
skl_update_scaler, Added NV12 condition in intel_check_sprite_plane
where src x/w is being checked for mult of 2 for yuv planes.

v6: Made changes to skl_check_nv12_surface as per WA#1106

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-4-git-send-email-vidya.srinivas@intel.com

drm/i915: Enable Display WA 0528

Possible hang with NV12 plane surface formats.
WA: When the plane source pixel format is NV12,
the CHICKEN_PIPESL_* register bit 22 must be set to 1
and the render decompression must not be enabled
on any of the planes in that pipe.

v2: removed unnecessary POSTING_READ

v3: Added RB from Maarten

v4: Removed support for NV12 for BROXTON

Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-3-git-send-email-vidya.srinivas@intel.com

drm/i915: Enable display workaround 827 for all planes, v2.

The workaround was applied only to the primary plane, but is required
on all planes. Iterate over all planes in the crtc atomic check to see
if the workaround is enabled, and only perform the actual toggling in
the pre/post plane update functions.

Changes since v1:
- Track active NV12 planes in a nv12_planes bitmask. (Ville)

v2: Removing BROXTON support for NV12 due to WA826

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-2-git-send-email-vidya.srinivas@intel.com

drm/i915/psr: Check if VBT says PSR can be enabled.

Driver features data block has a boolean flag for PSR, use this to decide
whether PSR should be enabled on a platform. The module parameter can
still be used to override this.

Note: The feature currently remains disabled by default for all platforms
irrespective of what VBT says.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509003524.3199-1-dhinakaran.pandiyan@intel.com

drm/i915/guc: Make submission tasklet hardirq safe

Prepare to allow the GuC submission to be run from underneath a
hardirq timer context (and not just the current softirq context) as is
required for fast preemption resets and context switches.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508210318.10274-2-chris@chris-wilson.co.uk

drm/i915/execlists: Make submission tasklet hardirq safe

Prepare to allow the execlists submission to be run from underneath a
hardirq timer context (and not just the current softirq context) as is
required for fast preemption resets and context switches.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508210318.10274-1-chris@chris-wilson.co.uk

drm/i915/selftests: Only switch to kernel context when locked

In igt_flush_test() we try to switch back to the kernel context, but we
are only able to do so when we are called with struct_mutex held.

More of my CI fallout from lockdep being temporarily suppressed :(

Fixes: 4cdf65ce8cc2 ("drm/i915/selftests: Return to kernel context after each test")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509065926.19207-1-chris@chris-wilson.co.uk

drm/i915/selftests: Create mock_engine() under struct_mutex

Calling mock_engine() calls i915_timeline_init() and that requires
struct_mutex to be held as it adds itself to the global list of
timelines. This error was introduced by commit a89d1f921c15 ("drm/i915:
Split i915_gem_timeline into individual timelines") but the issue was
masked in CI by the earlier lockdep spam.

Fixes: a89d1f921c15 ("drm/i915: Split i915_gem_timeline into individual timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508211056.17151-1-chris@chris-wilson.co.uk

drm/i915: Annotate timeline lock nesting

CI noticed

<4>[   23.430701] ============================================
<4>[   23.430706] WARNING: possible recursive locking detected
<4>[   23.430713] 4.17.0-rc4-CI-CI_DRM_4156+ #1 Not tainted
<4>[   23.430720] --------------------------------------------
<4>[   23.430725] systemd-udevd/169 is trying to acquire lock:
<4>[   23.430732]         (ptrval) (&(&timeline->lock)->rlock){....}, at: move_to_timeline+0x48/0x12c [i915]
<4>[   23.430888]
                  but task is already holding lock:
<4>[   23.430894]         (ptrval) (&(&timeline->lock)->rlock){....}, at: i915_request_submit+0x1a/0x40 [i915]
<4>[   23.430995]
                  other info that might help us debug this:
<4>[   23.431002]  Possible unsafe locking scenario:

<4>[   23.431007]        CPU0
<4>[   23.431010]        ----
<4>[   23.431013]   lock(&(&timeline->lock)->rlock);
<4>[   23.431021]   lock(&(&timeline->lock)->rlock);
<4>[   23.431028]
                   *** DEADLOCK ***

<4>[   23.431036]  May be due to missing lock nesting notation

<4>[   23.431044] 5 locks held by systemd-udevd/169:
<4>[   23.431049]  #0:         (ptrval) (&dev->mutex){....}, at: __driver_attach+0x42/0xe0
<4>[   23.431065]  #1:         (ptrval) (&dev->mutex){....}, at: __driver_attach+0x50/0xe0
<4>[   23.431078]  #2:         (ptrval) (&dev->struct_mutex){+.+.}, at: i915_gem_init+0xca/0x630 [i915]
<4>[   23.431174]  #3:         (ptrval) (rcu_read_lock){....}, at: submit_notify+0x35/0x124 [i915]
<4>[   23.431271]  #4:         (ptrval) (&(&timeline->lock)->rlock){....}, at: i915_request_submit+0x1a/0x40 [i915]
<4>[   23.431369]
                  stack backtrace:
<4>[   23.431377] CPU: 0 PID: 169 Comm: systemd-udevd Not tainted 4.17.0-rc4-CI-CI_DRM_4156+ #1
<4>[   23.431385] Hardware name: Dell Inc.                 OptiPlex GX280               /0G8310, BIOS A04 02/09/2005
<4>[   23.431394] Call Trace:
<4>[   23.431403]  dump_stack+0x67/0x9b
<4>[   23.431411]  __lock_acquire+0xc67/0x1b50
<4>[   23.431421]  ? ring_buffer_lock_reserve+0x154/0x3f0
<4>[   23.431429]  ? lock_acquire+0xa6/0x210
<4>[   23.431435]  lock_acquire+0xa6/0x210
<4>[   23.431530]  ? move_to_timeline+0x48/0x12c [i915]
<4>[   23.431540]  _raw_spin_lock+0x2a/0x40
<4>[   23.431634]  ? move_to_timeline+0x48/0x12c [i915]
<4>[   23.431730]  move_to_timeline+0x48/0x12c [i915]
<4>[   23.431826]  __i915_request_submit+0xfa/0x280 [i915]
<4>[   23.431923]  i915_request_submit+0x25/0x40 [i915]
<4>[   23.432024]  i9xx_submit_request+0x11/0x140 [i915]
<4>[   23.432120]  submit_notify+0x8d/0x124 [i915]
<4>[   23.432202]  __i915_sw_fence_complete+0x81/0x250 [i915]
<4>[   23.432300]  __i915_request_add+0x31c/0x7c0 [i915]
<4>[   23.432395]  i915_gem_init+0x621/0x630 [i915]
<4>[   23.432476]  i915_driver_load+0xbee/0x10b0 [i915]
<4>[   23.432485]  ? trace_hardirqs_on_caller+0xe0/0x1b0
<4>[   23.432566]  i915_pci_probe+0x29/0x90 [i915]
<4>[   23.432574]  pci_device_probe+0xa1/0x130
<4>[   23.432582]  driver_probe_device+0x306/0x480
<4>[   23.432589]  __driver_attach+0xb7/0xe0
<4>[   23.432596]  ? driver_probe_device+0x480/0x480
<4>[   23.432602]  ? driver_probe_device+0x480/0x480
<4>[   23.432609]  bus_for_each_dev+0x74/0xc0
<4>[   23.432616]  bus_add_driver+0x15f/0x250
<4>[   23.432623]  ? 0xffffffffa02d7000
<4>[   23.432629]  driver_register+0x52/0xc0
<4>[   23.432635]  ? 0xffffffffa02d7000
<4>[   23.432642]  do_one_initcall+0x58/0x370
<4>[   23.432653]  ? do_init_module+0x1d/0x1ea
<4>[   23.432660]  ? rcu_read_lock_sched_held+0x6f/0x80
<4>[   23.432667]  ? kmem_cache_alloc_trace+0x282/0x2e0
<4>[   23.432675]  do_init_module+0x56/0x1ea
<4>[   23.432682]  load_module+0x2435/0x2b20
<4>[   23.432694]  ? __se_sys_finit_module+0xd3/0xf0
<4>[   23.432701]  __se_sys_finit_module+0xd3/0xf0
<4>[   23.432710]  do_syscall_64+0x55/0x190
<4>[   23.432717]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[   23.432724] RIP: 0033:0x7fa780782839
<4>[   23.432729] RSP: 002b:00007ffcea73e668 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
<4>[   23.432738] RAX: ffffffffffffffda RBX: 0000561a472a4b30 RCX: 00007fa780782839
<4>[   23.432745] RDX: 0000000000000000 RSI: 00007fa7804610e5 RDI: 000000000000000e
<4>[   23.432752] RBP: 00007fa7804610e5 R08: 0000000000000000 R09: 00007ffcea73e780
<4>[   23.432758] R10: 000000000000000e R11: 0000000000000246 R12: 0000000000000000
<4>[   23.432765] R13: 0000561a47296450 R14: 0000000000020000 R15: 0000561a472a4b30

but did not report it as an issue as it only occurred during the first
module on boot. This is due to the removal of the distinct global
timeline, and its separate lock class. So instead mark up the expected
nesting. An alternative would be to define a separate lock class for the
engine, but since we only expect to have a single point of nesting, we
can avoid having multiple lock classes for the struct.

Fixes: a89d1f921c15 ("drm/i915: Split i915_gem_timeline into individual timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Tested-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508153514.20251-1-chris@chris-wilson.co.uk

drm/i915: Remove unused i915_flip tracepoints

The i915_flip* tracepoints are no longer in use since the removal of CS
flip in commit 8b5d27b911d7 ("drm/i915: Remove intel_flip_work
infrastructure")

References: 8b5d27b911d7 ("drm/i915: Remove intel_flip_work infrastructure")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508151552.31024-1-chris@chris-wilson.co.uk

drm/i915: Disable tasklet scheduling across initial scheduling

During request submission, we call the engine->schedule() function so
that we may reorder the active requests as required for inheriting the
new request's priority. This may schedule several tasklets to run on the
local CPU, but we will need to schedule the tasklets again for the new
request. Delay all the local tasklets until the end, so that we only
have to process the queue just once.

v2: Beware PREEMPT_RCU, as then local_bh_disable() is then not a
superset of rcu_read_lock().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507135731.10587-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Flush submission tasklet after bumping priority

When called from process context tasklet_schedule() defers itself to
ksoftirqd. From experience this may cause unacceptable latencies of over
200ms in executing the submission tasklet, our goal is to reprioritise
the HW execution queue and trigger HW preemption immediately, so disable
bh over the call to schedule and force the tasklet to run afterwards if
scheduled.

v2: Keep rcu_read_lock() around for PREEMPT_RCU

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507135731.10587-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/selftests: Return to kernel context after each test

As we flush each test and wait for idle before the next, also switch
back to the kernel context. This helps limit the amount of collateral
damage a test may cause by resetting to the default state each time (and
also helps clean up temporaries used by the test).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508115312.12628-1-chris@chris-wilson.co.uk

drm/i915: don't leak the pin_map on error

Add some onion to populate_lr_context.

v2: prefer err_unpin_ctx
    drop the fixes tag, worst case we just spew a warn before everything
    is cleaned up and balance is restored

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301114639.510-1-matthew.auld@intel.com

drm/i915/selftests: Flush GPU activity before completing live_contexts

igt_ctx_exec() expects that we retire all active requests/objects before
completing, so that when we clean up the files afterwards they are ready
to be freed. Before we do so, it is then prudent to ensure that we have
indeed retired the GPU activity, raising an error if it fails. If we do
not, we run the risk of triggering an assertion when freeing the object:

  __i915_gem_free_objects:4793 GEM_BUG_ON(i915_gem_object_is_active(obj))

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180505091014.26126-2-chris@chris-wilson.co.uk

drm/i915/selftests: Refactor common flush_test()

Pull igt_flush_test() out into its own library before copying and
pasting the code for a third time.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180505091014.26126-1-chris@chris-wilson.co.uk

drm/i915/userptr: reject zero user_size

Operating on a zero sized GEM userptr object will lead to explosions.

Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
Testcase: igt/gem_userptr_blits/input-checking
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502195021.30900-1-matthew.auld@intel.com

drm/i915/execlists: Cache the priolist when rescheduling

When rescheduling a change of dependencies, they all need to be added to
the same priolist (at least the ones on the same engine!). Since we
likely want to move a batch of requests, keep the priolist around.

v2: Throw in an assert to catch trivial errors quickly.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508003046.2633-2-chris@chris-wilson.co.uk

drm/i915/execlists: Drop unused parameter to lookup_priolist()

lookup_priolist() no longer attaches the request into the priolist, it
just returns the priolist for the given priority instead. Drop the
unused parameter.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508003046.2633-1-chris@chris-wilson.co.uk

drm/i915: Don't request a bug report for unsafe module parameters

Unsafe module parameters are just that, unsafe. If the user is foolish
enough to try them and the kernel breaks, they get to keep both pieces.
Don't ask them to file a bug report if they broke it themselves.

References: https://bugs.freedesktop.org/show_bug.cgi?id=106423
Fixes: d15d7538c6d2 ("drm/i915: Tune down init error message due to failure injection")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180506183147.2690-1-chris@chris-wilson.co.uk

drm/i915/icl: compute the MG PLL registers

This implements the "MG PLL Programming" sequence from our spec. The
biggest problem was that the spec assumes real numbers, so we had to
adjust some numbers and calculations due to the fact that the Kernel
prefers to deal with integers.

I recommend grabbing some coffee, a pen and paper before reviewing
this patch.

v2:
 - Correctly identify DP encoders after upstream change.
 - Small checkpatch issues.
 - Rebase.
v3:
 - Try to impove the comment on the tdc_targetcnt calculation based on
   Manasi's feedback (Manasi).
 - Rebase.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-7-paulo.r.zanoni@intel.com

drm/i915/icl: compute the combo PHY (DPLL) DP registers

Just use the hardcoded tables provided by our spec.

v2: Rebase.
v3: Clarify that 38.4 uses the 19.2 table (James).

Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-6-paulo.r.zanoni@intel.com

drm/i915/icl: compute the combo PHY (DPLL) HDMI registers

HDMI mode DPLL programming on ICL is the same as CNL, so just reuse
the CNL code.

v2:
 - Properly detect HDMI crtcs.
 - Rebase after changes to the cnl function (clock * 1000).
v3:
 - Add a comment to clarify why we treat 38.4 as 19.2 (James).

Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-5-paulo.r.zanoni@intel.com

drm/i915/icl: add basic support for the ICL clocks

This commit introduces the definitions for the ICL clocks and adds the
basic functions to the shared DPLL framework. It adds code for the
Enable and Disable sequences for some PLLs, but it does not have the
code to compute the actual PLL values, which are marked as TODO
comments and should be introduced as separate commits.

Special thanks to James Ausmus for investigating and fixing a bug with
the placement of icl_unmap_plls_to_ports() function.

v2:
 - Rebase around dpll_lock changes.
v3:
 - The spec now says what the timeouts should be.
 - Touch DPCLKA_CFGCR0_ICL at the appropriate time so we don't freeze
   the machine.
 - Checkpatch found a white space problem.
 - Small adjustments before upstreaming.
v4:
 - Move the ICL checks out of the *map_plls_to_ports() functions
  (James)
 - Add extra encoder check (James)
 - Call icl_unmap_plls_to_ports() later (James)
v5:
 - Rebase after the pll struct changes.
v6:
 - Properly make the unmap function based on encoders_post_disable()
   with regarding to checks and iterators.
 - Address checkpatch comment on "min = max = x()".

Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180427231436.9353-1-paulo.r.zanoni@intel.com

drm/i915: Add documentation to gen9_set_dc_state()

Add documentation to gen9_set_dc_state() on what enabling a given DC
state means and at what point HW/DMC actually enters/exits these states.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417113147.25120-1-imre.deak@intel.com

drm/i915/selftests: Skip the execlists tests on !execlists machines

Ignore the tests looking at the innards of execlists and its submission
tasklets on machines that don't support execlists!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504124202.24894-1-chris@chris-wilson.co.uk

drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log

Fix `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to
power on` in kernel log at boot time.

Toshiba Satellite Z930 laptops needs between 1 and 2 seconds to power
on its screen during Intel i915 DRM initialization. This currently
results in a `[drm:intel_enable_lvds] *ERROR* timed out waiting for
panel to power on` message appearing in the kernel log during boot
time and when stopping the machine.

This change increases the timeout of the `intel_enable_lvds` function
from 1 to 5 seconds, letting enough time for the Satellite 930 LCD
screen to power on, and suppressing the error message from the kernel
log.

This patch has been successfully tested on Linux 4.14 running on a
Toshiba Satellite Z930.

[vsyrjala: bump the timeout from 2 to 5 seconds to match the DP
 code and properly cover the max hw timeout of ~4 seconds, and
 drop the comment about the specific machine since this is not
 a particulary surprising issue, nor specific to that one machine]

Signed-off-by: Florent Flament <contact@florentflament.com>
Cc: stable@vger.kernel.org
Cc: Pavel Petrovic <ppetrovic@acm.org>
Cc: Sérgio M. Basto <sergio@serjux.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103414
References: https://bugzilla.kernel.org/show_bug.cgi?id=57591
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419160700.19828-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Include priority and completed status in request in/out tracepoints

It is useful to see the priority as requests are coming in and completed
status as requests are coming out of the GPU.

To achieve this in a more readable way we need to abandon the common
request_hw tracepoint class.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504115643.22437-1-tvrtko.ursulin@linux.intel.com

drm/i915: Remove assertion of active_rings must be non-empty if active_requests

"An outstanding request must still be on an active ring somewhere" is
only true if we haven't just been interrupted by the shrinker in the
middle of allocating the request itself. (At the start of
i915_request_alloc() we pin the context and prepare the GT for activity,
marking it as active, and then try to allocate the request. If this
allocation invokes the shrinker, we try to reclaim some space by calling
i915_retire_requests() which may then be confused by the pre-reservation
of active_requests.)

<3>[  125.472695] i915_retire_requests:1429 GEM_BUG_ON(list_empty(&i915->gt.active_rings))
<2>[  125.472792] kernel BUG at drivers/gpu/drm/i915/i915_request.c:1429!
<4>[  125.472822] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
<4>[  125.498764] Modules linked in: snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel btusb btrtl btbcm btintel cdc_ether snd_hda_codec_realtek bluetooth i915 snd_hda_codec_generic usbnet r8152 mii ecdh_generic lpc_ich mei_me snd_hda_intel snd_hda_codec mei snd_hwdep snd_hda_core snd_pcm prime_numbers
<4>[  125.498923] CPU: 0 PID: 1115 Comm: gem_exec_create Tainted: G     U            4.17.0-rc3-gc49cbe0d1eb8-kasan_32+ #1
<4>[  125.498955] Hardware name: GOOGLE Peppy/Peppy, BIOS MrChromebox 02/04/2018
<4>[  125.499074] RIP: 0010:i915_retire_requests+0x3f2/0x590 [i915]
<4>[  125.499095] RSP: 0018:ffff88004e5dec40 EFLAGS: 00010282
<4>[  125.499117] RAX: 0000000000000010 RBX: ffff8800458f0000 RCX: 0000000000000000
<4>[  125.499140] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff880060c2f6f0
<4>[  125.499164] RBP: ffff88004e5dee30 R08: ffffed000c185ee6 R09: ffffed000c185ee6
<4>[  125.499187] R10: 0000000000000001 R11: ffffed000c185ee5 R12: ffff8800553da160
<4>[  125.499210] R13: dffffc0000000000 R14: 0000000000000000 R15: ffff8800458faed0
<4>[  125.499235] FS:  00007fe18f052980(0000) GS:ffff880065400000(0000) knlGS:0000000000000000
<4>[  125.499262] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[  125.499282] CR2: 00007f01df11efb8 CR3: 00000000518d4001 CR4: 00000000000606f0
<4>[  125.499304] Call Trace:
<4>[  125.499417]  i915_gem_shrink+0x576/0xb50 [i915]
<4>[  125.499532]  ? i915_gem_shrinker_count+0x2f0/0x2f0 [i915]
<4>[  125.499561]  ? trace_hardirqs_on_thunk+0x1a/0x1c
<4>[  125.499671]  ? i915_gem_shrinker_count+0x1d6/0x2f0 [i915]
<4>[  125.499782]  ? i915_gem_shrinker_scan+0xc4/0x320 [i915]
<4>[  125.499889]  i915_gem_shrinker_scan+0xc4/0x320 [i915]
<4>[  125.499997]  ? i915_gem_shrinker_vmap+0x3a0/0x3a0 [i915]
<4>[  125.500021]  ? do_raw_spin_unlock+0x4f/0x240
<4>[  125.500042]  ? _raw_spin_unlock+0x29/0x40
<4>[  125.500149]  ? i915_gem_shrinker_count+0x1d6/0x2f0 [i915]
<4>[  125.500177]  shrink_slab.part.18+0x23e/0x8f0
<4>[  125.500202]  ? unregister_shrinker+0x1f0/0x1f0
<4>[  125.500226]  ? mem_cgroup_iter+0x379/0xcc0
<4>[  125.500249]  shrink_node+0xa7e/0x1180
<4>[  125.500276]  ? shrink_node_memcg+0x11f0/0x11f0
<4>[  125.500297]  ? __delayacct_freepages_start+0x38/0x80
<4>[  125.500319]  ? __is_insn_slot_addr+0xe3/0x1a0
<4>[  125.500342]  ? recalibrate_cpu_khz+0x10/0x10
<4>[  125.500361]  ? ktime_get+0xb2/0x140
<4>[  125.500382]  do_try_to_free_pages+0x2d3/0xe40
<4>[  125.500407]  ? allow_direct_reclaim.part.23+0x1e0/0x1e0
<4>[  125.500429]  ? shrink_node+0x1180/0x1180
<4>[  125.500450]  ? __read_once_size_nocheck.constprop.4+0x10/0x10
<4>[  125.500476]  try_to_free_pages+0x1af/0x560
<4>[  125.500497]  ? do_try_to_free_pages+0xe40/0xe40
<4>[  125.500525]  __alloc_pages_nodemask+0xadc/0x2130
<4>[  125.500553]  ? gfp_pfmemalloc_allowed+0x150/0x150
<4>[  125.500654]  ? i915_gem_do_execbuffer+0x219d/0x32e0 [i915]
<4>[  125.500678]  ? debug_check_no_locks_freed+0x2a0/0x2a0
<4>[  125.500701]  ? __debug_object_init+0x322/0xd90
<4>[  125.500722]  ? debug_check_no_locks_freed+0x2a0/0x2a0
<4>[  125.500827]  ? i915_gem_do_execbuffer+0xdc2/0x32e0 [i915]
<4>[  125.500942]  ? i915_request_alloc+0x5b5/0x13f0 [i915]
<4>[  125.500964]  ? page_frag_free+0x170/0x170
<4>[  125.500984]  ? debug_check_no_locks_freed+0x2a0/0x2a0
<4>[  125.501008]  new_slab+0x21d/0x5c0
<4>[  125.501029]  ___slab_alloc.constprop.35+0x322/0x3e0
<4>[  125.501052]  ? reservation_object_reserve_shared+0x10b/0x250
<4>[  125.501074]  ? __ww_mutex_lock.constprop.3+0x1104/0x2cf0
<4>[  125.501097]  ? _raw_spin_unlock_irqrestore+0x39/0x60
<4>[  125.501120]  ? fs_reclaim_acquire+0x10/0x10
<4>[  125.501138]  ? lock_acquire+0x138/0x3c0
<4>[  125.501156]  ? lock_acquire+0x3c0/0x3c0
<4>[  125.501176]  ? reservation_object_reserve_shared+0x10b/0x250
<4>[  125.501198]  ? __slab_alloc.isra.27.constprop.34+0x3d/0x70
<4>[  125.501219]  __slab_alloc.isra.27.constprop.34+0x3d/0x70
<4>[  125.501243]  ? reservation_object_reserve_shared+0x10b/0x250
<4>[  125.501265]  __kmalloc_track_caller+0x313/0x350
<4>[  125.501287]  krealloc+0x62/0xb0
<4>[  125.501305]  reservation_object_reserve_shared+0x10b/0x250
<4>[  125.501411]  i915_gem_do_execbuffer+0x2040/0x32e0 [i915]
<4>[  125.501522]  ? eb_relocate_slow+0xad0/0xad0 [i915]
<4>[  125.501544]  ? debug_check_no_locks_freed+0x2a0/0x2a0
<4>[  125.501646]  ? i915_gem_execbuffer2_ioctl+0x108/0x770 [i915]
<4>[  125.501755]  ? i915_gem_execbuffer2_ioctl+0x108/0x770 [i915]
<4>[  125.501779]  ? drm_dev_get+0x20/0x20
<4>[  125.501803]  ? __might_fault+0xea/0x1a0
<4>[  125.501902]  ? i915_gem_execbuffer2_ioctl+0x108/0x770 [i915]
<4>[  125.502012]  ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915]
<4>[  125.502116]  ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915]
<4>[  125.502218]  i915_gem_execbuffer2_ioctl+0x3c5/0x770 [i915]
<4>[  125.502243]  ? drm_dev_enter+0xe0/0xe0
<4>[  125.502260]  ? lock_acquire+0x138/0x3c0
<4>[  125.502362]  ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915]
<4>[  125.502470]  ? i915_gem_object_create.part.28+0x570/0x570 [i915]
<4>[  125.502575]  ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915]
<4>[  125.502680]  ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915]
<4>[  125.502702]  drm_ioctl_kernel+0x151/0x200
<4>[  125.502721]  ? drm_ioctl_permit+0x2a0/0x2a0
<4>[  125.502746]  drm_ioctl+0x63a/0x920
<4>[  125.502844]  ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915]
<4>[  125.502868]  ? drm_getstats+0x20/0x20
<4>[  125.502886]  ? trace_hardirqs_on_thunk+0x1a/0x1c
<4>[  125.502919]  do_vfs_ioctl+0x173/0xe90
<4>[  125.502936]  ? trace_hardirqs_on_thunk+0x1a/0x1c
<4>[  125.502957]  ? ioctl_preallocate+0x170/0x170
<4>[  125.502978]  ? trace_hardirqs_on_thunk+0x1a/0x1c
<4>[  125.503002]  ? retint_kernel+0x2d/0x2d
<4>[  125.503024]  ksys_ioctl+0x35/0x60
<4>[  125.503043]  __x64_sys_ioctl+0x6a/0xb0
<4>[  125.503061]  do_syscall_64+0x97/0x400
<4>[  125.503081]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  125.503101] RIP: 0033:0x7fe18e4f65d7
<4>[  125.503116] RSP: 002b:00007ffe2ffc06a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
<4>[  125.503145] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe18e4f65d7
<4>[  125.503168] RDX: 00007ffe2ffc07f0 RSI: 0000000040406469 RDI: 0000000000000003
<4>[  125.503191] RBP: 00007ffe2ffc07f0 R08: 0000000000000004 R09: 00007ffe2ffcf080
<4>[  125.503215] R10: 000000000002c7de R11: 0000000000000246 R12: 0000000040406469
<4>[  125.503238] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
<4>[  125.503268] Code: e8 18 a0 c9 da 48 8b 35 25 3a 47 00 49 c7 c0 a0 3b 88 c0 b9 95 05 00 00 48 c7 c2 e0 49 88 c0 48 c7 c7 8d 3b 5d c0 e8 ee 7e db da <0f> 0b 48 89 ef e8 a4 26 f5 da e9 51 fe ff ff e8 8a 26 f5 da e9
<1>[  125.503548] RIP: i915_retire_requests+0x3f2/0x590 [i915] RSP: ffff88004e5dec40

Fixes: 643b450a594e ("drm/i915: Only track live rings for retiring")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504101147.26286-1-chris@chris-wilson.co.uk

drm/i915/gtt: Tidy up duplicate branches in gen8_gmch_probe()

Following commit f773568b6ff8 ("drm/i915: nuke the duplicated stolen
discovery"), the if-else-chain for determining the GTT size is redundant
with the !chv branches all being the same.

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: f773568b6ff8 ("drm/i915: nuke the duplicated stolen discovery")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503212956.3948-1-chris@chris-wilson.co.uk

i915: Convert to use match_string() helper

The new helper returns index of the matching string in an array.
We are going to use it here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503181706.22120-1-andriy.shevchenko@linux.intel.com

drm/i915/execlists: Drop preemption arbitrations points along the ring

Limit the arbitration (where preemption may occur) to inside the batch,
and prevent it from happening on the pipecontrols/flushes we use to
write the breadcrumb seqno. Once the user batch is complete, we have
nothing left to do but serialise and emit the breadcrumb; switching
contexts at this point is futile so don't.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503195416.22498-1-chris@chris-wilson.co.uk

drm/i915: Keep one request in our ring_list

Don't pre-emptively retire the oldest request in our ring's list if it
is the only request. We keep various bits of state alive using the
active reference from the request and would rather transfer that state
over to a new request rather than the more involved process of retiring
and reacquiring it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503195115.22309-2-chris@chris-wilson.co.uk

drm/i915: Lazily unbind vma on close

When userspace is passing around swapbuffers using DRI, we frequently
have to open and close the same object in the foreign address space.
This shows itself as the same object being rebound at roughly 30fps
(with a second object also being rebound at 30fps), which involves us
having to rewrite the page tables and maintain the drm_mm range manager
every time.

However, since the object still exists and it is only the local handle
that disappears, if we are lazy and do not unbind the VMA immediately
when the local user closes the object but defer it until the GPU is
idle, then we can reuse the same VMA binding. We still have to be
careful to mark the handle and lookup tables as closed to maintain the
uABI, just allowing the underlying VMA to be resurrected if the user is
able to access the same object from the same context again.

If the object itself is destroyed (neither userspace keeping a handle to
it), the VMA will be reaped immediately as usual.

In the future, this will be even more useful as instantiating a new VMA
for use on the GPU will become heavier. A nuisance indeed, so nip it in
the bud.

v2: s/__i915_vma_final_close/i915_vma_destroy/ etc.
v3: Leave a hint as to why we deferred the unbind on close.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503195115.22309-1-chris@chris-wilson.co.uk

drm/i915/selftests: fix spelling mistake: "parmaters" -> "parameters"

Trivial fix to spelling mistake in pr_err error message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503154510.708-1-colin.king@canonical.com

drm/i915/icl: Add configuring MOCS in new Icelake engines

In Icelake, there are more engines on which Memory Object Control
States need to be configured. Besides adding Icelake under Skylake
config, the patch makes sure MOCS register addresses for the new
engines are properly defined.

Additional patch might be need later, in case the specification will
propose different MOCS config values for Icelake than in previous
gens.

v2: Restricted comments to gen11, updated description, renamed
defines.

v3: Used proper engine indexes for gen11.

v4: Ensure patch is Icelake only.

v5: Style fixes (proposed by mwajdeczko)

v6 (from Paulo): fix checkpatch's COMMIT_LOG_LONG_LINE (Checkpatch).

BSpec: 19405
BSpec: 21140
Cc: Oscar Mateo Lozano <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502223142.3891-1-paulo.r.zanoni@intel.com

drm/i915: Correctly populate user mode h/vdisplay with pipe src size during readout

During state readout we first read out the pipe src size, store
that information in the user mode h/vdisplay, but later on we overwrite
that with the actual crtc timings. That makes our read out crtc state
inconsistent with itself when the BIOS has enabled the panel fitter to
scale the pipe contents. Let's preserve the pipe src size based
information in the user mode to make things consistent again.

This fixes a problem introduced by commit a2936e3d9a9c ("drm/i915:
Use drm_mode_get_hv_timing() to populate plane clip rectangle")
where the inconsistent state is now leading the plane clipping code
to report a failure on account the plane dst coordinates not matching
the user mode size. Previously we did the plane clipping based on
the pipe src size instead and thus never noticed the inconsistency.

The failure manifests as a WARN:
[    0.762117] [drm:intel_dump_pipe_config [i915]] requested mode:
[    0.762142] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 72143 1366 1414 1446 1526 768 771 777 784 0x40 0xa
...
[    0.762327] [drm:intel_dump_pipe_config [i915]] port clock: 72143, pipe src size: 1024x768, pixel rate 72143
...
[    0.764666] [drm:drm_atomic_helper_check_plane_state [drm_kms_helper]] Plane must cover entire CRTC
[    0.764690] [drm:drm_rect_debug_print [drm]] dst: 1024x768+0+0
[    0.764711] [drm:drm_rect_debug_print [drm]] clip: 1366x768+0+0
[    0.764713] ------------[ cut here ]------------
[    0.764714] Could not determine valid watermarks for inherited state
[    0.764792] WARNING: CPU: 4 PID: 159 at drivers/gpu/drm/i915/intel_display.c:14584 intel_modeset_init+0x3ce/0x19d0 [i915]
...

Cc: FadeMind <fademind@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: FadeMind <fademind@gmail.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Tested-by: Dave Jones <davej@codemonkey.org.uk>
References: https://lists.freedesktop.org/archives/intel-gfx/2018-April/163186.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105992
Fixes: a2936e3d9a9c ("drm/i915: Use drm_mode_get_hv_timing() to populate plane clip rectangle")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426163015.14232-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: FadeMind <fademind@gmail.com>

drm/i915: Remove redundant check for negative timeout while doing an atomic pipe update

No functional changes, just a minor knit. Stumbled across the kernel doc for
schedule_timeout() which quotes "In all cases the return value is guaranteed
to be non-negative". Also, the return code of schedule_timeout() already checks
for negative values "return timeout < 0 ? 0 : timeout;" and returns 0
in such cases. Furthermore, the msec_to_jiffies returns an ungined long
value. So, let's do away with the redundant check for an atomic
pipe update.

v2: Commit message changes (Manasi).

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502233300.81220-1-tarun.vyas@intel.com

drm/i915: Adjust eDP's logical vco in a reliable place.

On intel_dp_compute_config() we were calculating the needed vco
for eDP on gen9 and we stashing it in
intel_atomic_state.cdclk.logical.vco

However few moments later on intel_modeset_checks() we fully
replace entire intel_atomic_state.cdclk.logical with
dev_priv->cdclk.logical fully overwriting the logical desired
vco for eDP on gen9.

So, with wrong VCO value we end up with wrong desired cdclk, but
also it will raise a lot of WARNs: On gen9, when we read
CDCLK_CTL to verify if we configured properly the desired
frequency the CD Frequency Select bits [27:26] == 10b can mean
337.5 or 308.57 MHz depending on the VCO. So if we have wrong
VCO value stashed we will believe the frequency selection didn't
stick and start to raise WARNs of cdclk mismatch.

[   42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[   42.897269] cdclk state doesn't match!
[   42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915]
[   42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915]
[   43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915]
[   43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[   43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

v2: Move the entire eDP's vco logical adjustment to inside
    the skl_modeset_calc_cdclk as suggested by Ville.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: bb0f4aab0e76 ("drm/i915: Track full cdclk state for the logical and actual cdclk frequencies")
Cc: <stable@vger.kernel.org> # v4.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20180502175255.5344-1-rodrigo.vivi@intel.com

drm/i915: Mark the hangcheck as idle when unparking the engines

As we unpark the engines and are about to begin a new cycle of activity,
mark the current status of the hangceck as idle so that we avoid
carrying over a stale timestamp/action into the next cycle.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502220313.6459-2-chris@chris-wilson.co.uk