staging: iio: simplify logic in iio_interrupt_handler

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: convert idr to ida as pointer never provided

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: add ath6kl driver for AR6003 chip

AR6003 is a single stream, SDIO based 802.11 chipset from
Atheros optimized for mobile and embedded devices. ath6kl is a
cfg80211 driver for AR6003 and supports both the station and
AP mode of operation.

Station mode supports 802.11 a/b/g/n with HT20 on 2.4/5GHz and
HT40 only on 5GHz. Some of the other features include WPA/WPA2,
WPS, WMM, WMM-PS, and BT coexistence. AP mode can be operated
only in b/g mode with support for a subset of features mentioned
above.

The driver supports cfg80211 but comes with its own set of
wext ioctls which have historically supported some of our
customers with features like BT 3.0 and AP mode of operation.

For further details, please refer to:

http://wireless.kernel.org/en/users/Drivers/ath6kl

The driver requires firmware that runs on the chip's network
processor. The majority of it is stored in ROM. The binaries
that are downloaded and executed from RAM are as follows:

1) Patch against the code in ROM for bug fixes and feature
   enhancements.
2) Code to copy the data from the OTP region of the memory
   into RAM.
3) Calibration file carrying board specific data.

The above files need to be present in the directory
'/lib/firmware/ath6k/AR6003/hw2.0/' for the driver to initialize
the chip upon enumeration. The files can be downloaded from the
link specified at the following location:

http://wireless.kernel.org/en/users/Drivers/ath6kl#Download

This driver is only provided in the interim while we work on
the mac80211 replacement, ath6k. Once the mac80211 driver
achieves feature parity with the ath6kl driver, the ath6kl will
be deprecated and removed from staging.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: zram: Update zram documentation

Update zram documentation to reflect transition form
ioctl to sysfs interface.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: zram: Remove need for explicit device initialization

Currently, the user has to explicitly write a positive value to
initstate sysfs node before the device can be used. This event
triggers allocation of per-device metadata like memory pool,
table array and so on.

We do not pre-initialize all zram devices since the 'table' array,
mapping disk blocks to compressed chunks, takes considerable amount
of memory (8 bytes per page). So, pre-initializing all devices will
be quite wasteful if only few or none of the devices are actually
used.

This explicit device initialization from user is an odd requirement and
can be easily avoided. We now initialize the device when first write is
done to the device.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: zram: Document sysfs entries

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: zram: Replace ioctls with sysfs interface

Creates per-device sysfs nodes in /sys/block/zram<id>/
Currently following stats are exported:
 - disksize
 - num_reads
 - num_writes
 - invalid_io
 - zero_pages
 - orig_data_size
 - compr_data_size
 - mem_used_total

By default, disksize is set to 0. So, to start using
a zram device, fist write a disksize value and then
initialize device by writing any positive value to
initstate. For example:

        # initialize /dev/zram0 with 50MB disksize
        echo 50*1024*1024 | bc > /sys/block/zram0/disksize
        echo 1 > /sys/block/zram0/initstate

When done using a disk, issue reset to free its memory
by writing any positive value to reset node:

        echo 1 > /sys/block/zram0/reset

This change also obviates the need for 'rzscontrol' utility.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: line6: another upstream sync

Everything should be in sync now.

Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: line6: sync with upstream

Big upstream sync.

Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8193*: Remove double test

The 1 element of the array is tested twice.  Change the code so that the
remaining 3 element of the array is tested instead of testing the 1 element
a second time.

The sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@expression@
expression E;
@@

(
* E
  || ... || E
|
* E
  && ... && E
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: solo6x10: fixed assignments in if conditions in solo6010-core.c

This is a patch to the solo6010-core.c file that fixes the assignments
in if condition style issues found by the checkpatch.pl tool.

Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: r8712u: Update copy-to list for patches

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: mrst-touchscreen: Fix wrong Makefile config

The config name is wrong in drivers/staging/Makefile...
The object name is wrong in drivers/staging/mrst-touchscreen/Makefile...

Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: mrst-touchscreen: fix channel allocation in the touch screen driver

the touch screen driver tries to find a range of free channels (which
are an array of bytes), by scanning for the "end of used channel" marker.
however it tries to be WAAAAY too smart and does 32 bit logic on 8 bit
quantities, and in the process completely gets it wrong
(repeatedly read the same register instead of incrementing in the loop,
assuming that if any of the 4 bytes in the 32 byte quantity is free,
all four are free, returning the channel number divided by 4 rather than
the actual first free channel number)

On the setting side, the same mistakes are made by and large; changed
this to just use the byte SCU write functions....

with these fixes we go from a completely non detected touchscreen to
something that appears to completely get detected.
(after also fixing the ordering issue that Jacobs patch should solve)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: ti-st: remove st_get_plat_device

In order to support multiple ST platform devices, a new symbol
'st_get_plat_device' earlier needed to be exported by the arch/XX/brd-XX.c
file which intends to add the ST platform device.

On removing this dependency, now inside ST driver maintain the array of
ST platform devices that would be registered.
As of now let id=0, as and when we end up having such platforms
where mutliple ST devices can exist, id would come from
protocol drivers (BT, FM and GPS) as to on which platform device
they want to register to.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: fix brace coding style issue in dt2817.c

This is a patch to the dt2817.c file that fixes up all coding style
issues found by the checkpatch.pl tool

Signed-off-by: Sunny Aujla <sunnyfedora99@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: RT2860: Fixed all warnings and errors in the iface directory

I have cleaned both files inside the iface directory (fileo rtmp_pci.h
and rtmp_usb.h). I am not sure about some of the changes I have made
however my adjustments have solved all errors.  There were also a few
issues on my machine with ap.h on my machine, however I have since
cleaned that too.

Signed-off-by: Neil Munro <neilmunro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl81*: Fix spelling fuction -> function in comments

Obviously the wrong spelling was copied a lot of times.

A similar patch for the non-staging part of linux
is committed by Jiri Kosina.

Cc: devel@driverdev.osuosl.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Cleanup style and whitespace

Replace C99-style comments with C89-style comments, fix some typos,
and fix whitespace to use only tabs.

Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Use available error codes

An error code is stored in a variable, but 0 is returned instead.  Use the
variable instead of 0.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
local idexpression x;
constant C;
@@

if (...) { ...
  x = -C
  ... when != x
(
  return <+...x...+>;
|
  return NULL;
|
  return;
|
* return ...;
)
}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cx25821: clenup warnings found by checkpatch.pl tool in cx25821-audio-upstream.c and cx25821-audio.h.

This is a patch to the cx25821-audio-upstream.c and cx25821-audio.h
that fixes up a warnings found by checkpatch.pl tool.

Signed-off-by: Ilya Gorskin <Revent82@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Remove redundant brackets around return values

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Remove pointless return statements

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Remove unnecessary externs

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Remove unused function

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Don't compare bHwRadioOff with true

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Make functions static

Make functions static and move their declarations to
 the top of the file.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Remove backslashes at end of lines

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Simplify some return codes

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Delete unused function dm_shadow_init()

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: xgifb: fix lots of sparse warnings

Fix many sparse warnings about data or functions being static.
Fix many sparse warnings about data or functions not being used
  (put them inside #if 0/#endif blocks).
Fix sparse warnings about 0 being used for NULL.
Fixed a small bit of source formatting when those lines were being
  modified anyway, but there is still lots of this yet to be done.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: devel@driverdev.osuosl.org
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: solo6x10: return -EFAULT on copy_to_user errors

copy_to_user() returns the number of bytes remaining to be copied, but
we want to return a negative error code here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: adis16255: fix sysfs leak

Original code does not call sysfs_remove_group() on error. This can lead
to NULL dereference.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tm6000: fix memory leak

Original code doesn't call kfree(chip) on error.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: usbip: fix memory leak

If stub_probe() failed then do not increase interf_count. In original
code sdev was leaked as its interf_count never reaches 0.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: lirc: fix compiler warning

On Fri, Aug 13, 2010 at 03:38:40PM +0200, Dan Carpenter wrote:
> Speak of left over stuff, it's weird that I didn't notice this before
> but gcc complains about an unitialized variable in
> imon_incoming_packet().
>
> drivers/staging/lirc/lirc_imon.c: In function ‘imon_incoming_packet’:
> drivers/staging/lirc/lirc_imon.c:661: warning: ‘chunk_num’ may be used
>  uninitialized in this function
>
> I don't know how to fix that, but it looks important.

Ew. Yeah, that doesn't look so hot like it is right now. The old lirc_imon
driver had chunk_num = buf[7], and made much more extensive use of
chunk_num. Simply removing chunk_num and using buf[7] should be fine.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: cx25821: call disable_pci_device() if pci_probe() failed

Driver should call disable_pci_device() if it returns from pci_probe()
with error. Also it must not be called if pci_request_region() fails as
it means that somebody uses device resources and rules the device.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: sm7xx: call disable_pci_device() if pci_probe() failed

Driver should call disable_pci_device() if it returns from pci_probe()
with error.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8187e: call disable_pci_device() if pci_probe() failed

Driver should call disable_pci_device() if it returns from pci_probe()
with error.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: quickstart: acpi_status is unsigned

acpi_bus_register_driver() returns an int, not acpi_status.  It returns
zero on success and negative error codes on failure, but acpi_status is
unsigned.  We can just use "ret" here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: ti-st: writing past end of array

In the original source it would write past the end of the array before
returning the error code.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: add curly braces to if statement

In the original code there was some extra semicolons after the if
statement:
if (!channel_map[ieee->current_network.channel]);
       ^^^
>From the indenting it looked like that should be curly braces instead.

Also I made some white space changes to stop checkpatch.pl from
complaining.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: lirc: remove unneeded variable

We never use control_req so I removed it.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: spectra: call disable_pci_device() if pci_probe() failed

Driver should call disable_pci_device() if it returns from pci_probe()
with error.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8187se: call disable_pci_device() if pci_probe() failed

Driver should call disable_pci_device() if it returns from pci_probe()
with error.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: crystalhd: call disable_pci_device() if pci_probe() failed

Driver should call disable_pci_device() if it returns from pci_probe()
with error.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: use DEFINE_PCI_DEVICE_TABLE() macro

Use DEFINE_PCI_DEVICE_TABLE() to make xgifb_pci_table const and marked as __devinitconst

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (cb_pcidas): use PCI_DEVICE() macro

This is the first of a patch series that uses PCI_DEVICE() macro for pci table entries on comedi drivers and thus improving readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (cb_pcidda): use PCI_DEVICE() macro

Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (cb_pcidio): user PCI_DEVICE() macro

Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (rtd520): use PCI_DEVICE() macro

Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (me4000): use PCI_DEVICE() macro

Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (cb_pcimdas): use PCI_DEVICE() macro

Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (adv_pci_dio): use PCI_DEVICE() macro

Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (adl_pci6208): use PCI_DEVICE() macro

Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (adl_pci9118): use PCI_DEVICE() macro

Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (skel): use PCI_DEVICE() macro

Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (adv_pci1710): use PCI_DEVICE() macro

Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (adv_pci1723): use PCI_DEVICE() macro

Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (cb_pcidas64): use PCI_DEVICE() macro

Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi (dt3000): use PCI_DEVICE() macro

Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: RT2860: Fixed the spacing error in oid.h

Fixed the single spacing error in oid.h.

Signed-off-by: Neil Munro <neilmunro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: RT2860: Fixed both coding style errors in eeprom.h

Fixed two coding style errors in the form of pointer style issues in eeprom.h.

Signed-off-by: Neil Munro <neilmunro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: otus: fix compile warning and some style issues

In today linux-next I got a compile warning in staging/otus driver.
This patch solves the issue and also improves the coding style.

Signed-off-by: Roberto Rodriguez Alcala <rralcala@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: slicoss: Remove explicit arch dependencies

Remove explicit arch dependencies

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: hmc5843 change ABI to comply with documentation

this one completes my last patch set to compile fine for all drivers.

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Datta, Shubhrajyoti <shubhrajyoti@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio sync scale units

g     -> ms/s^2
deg   -> rad
deg/s -> rad/s
some temperatures still broken

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio sync drivers with current ABI

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio partial documentation update

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio move scan_elements into ring buffer

tested with sca3000, adis16400

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: lis3l02dq adjust lis3l02dq_configure_ring

Now fits other driver's structure for easier modification.

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio rename ring attributes

bps -> bytes_per_datum
ring_enable -> enable

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: signedness bug

i2c_smbus_read_byte_data() returns an s32 type.  We need to change
"rate" to signed for the error handling to work.

Also I changed it to propogate the error code instead of just returning
-EINVAL.  Other error codes could be -EAGAIN for example.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/iio: call mutex_unlock in error handling code

Adjust the error handling code so that it benefits from the call to
mutex_unlock at the end of the function.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@rcu exists@
position p1;
expression E;
@@

mutex_lock@p1(E);
...
mutex_unlock(E);

@exists@
position rcu.p1;
expression E;
@@

*mutex_lock@p1(E);
... when != mutex_unlock(E);
?*return ...;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: problems in error handling

The first kfree(pDevice) is pointless because pDevice is NULL.  The
second kfree(pDevice) is a double free because pDevice is the driver's
private data and that is already freed by free_netdev(netdev).  Also the
free_netdev() error path doesn't call usb_put_dev().

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: resolved checkpatch finding

Added spaces in for loop arguments.

Signed-off-by: Luis Bosch <luis.bosch@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: removed extra spaces

Removed spaces between functions name and parenthesis.

Signed-off-by: Victor Rosales <victorhrosales@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: changed comments convention and removed spaces before tab

resolved checkpatch finding

Signed-off-by: Alejandro Emanuel Paredes <aleparedes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: removed macro to test bits

Removed custom macro used to test bits.

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: removed NDIS_STATUS int redefinition

Removed int redefinition for function results.

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: removed custom definitions of Ethernet packet types

Removed some unused definitions of Ethernet packet types, also replaced
two of them with in-kernel counterparts from include/linux/if_ether.h

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: Remove services.c and services.h

The services_init() and services_exit() functions don't do anything,
so they are removed, and as these are the only two functions defined
in services.c and services.h, then these files are also removed.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: Remove cfg.c and cfg.h files

So far, the cfg.c file is empty, and the function prototypes in cfg.h
are not used in any place. So they can be removed.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: Remove cfg_set_object()

As the services directory is going to be removed, the cfg_set_object
function has also to be removed.

Since the driver object handle is retrieved from the drv_data structure,
then the word "Registry" is replaced by "driver data" in the comments.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: Remove cfg_set_dev_object()

As the services directory is going to be removed, the cfg_set_dev_object
function has also to be removed.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: Remove cfg_get_object()

As the services directory is going to be removed, the cfg_get_object
function has also to be removed.

Since the driver object handle is retrieved from the drv_data structure,
then the word "Registry" is replaced by "driver data" in the comments.

Also, the hdrv_obj is not used in function omap34_xx_bridge_remove(), so
it is removed.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: Remove cfg_get_exec_file()

As the services directory is going to be removed, the cfg_get_exec_file
function has also to be removed.

This patch also avoids a possible NULL pointer dereference in function
cfg_get_exec_file(), when drv_datap is checked for NULL and then pass
drv_datap->base_img as argument to strlen().

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: Remove cfg_get_dev_object() and do a trivial cleanup

The cfg_get_dev_object function is only used in one place and because of
its simplicity, it can be removed.

The parameter *value can be left uninitialized if the strcmp() returns a
nonzero value, so in the function dev_remove_device(), the hdev_obj could
be used uninitialized and could be dereferenced in dev_destroy_device().
This patch fixes this issue, and also removes the dev_obj pointer which
is not used.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: Remove cfg_init() and cfg_exit()

The functions cfg_init() and cfg_exit() do nothing, so they are removed.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: Remove cfg_get_auto_start()

As the services directory is going to be removed, this patch is needed.

The function cfg_get_auto_start() only assigns a value to the flag
tmp, and it is only called by the function api_init_complete2(). So
the function cfg_get_auto_start() is not required.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: Remove ntfy.c

As the services directory is going to be removed, this patch is needed.

ntfy.c only contained the function dsp_notifier_event(), and since this
function calls sync_set_event(), then the dsp_notifier_event() is moved
to the sync.c file.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: Move sync.c from services to core

As the services directory is going to be removed, the file sync.c is moved
from services to core.

Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers: staging: tidspbridge: gen: gb.c: Removed duplicated #include

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: removed not useful comments

Removed comments about who changed/added lines, they do not seem useful.

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6655: do not use PCI resources before pci_enable_device()

IRQ and resource[] may not have correct values until
after PCI hotplug setup occurs at pci_enable_device() time.

The semantic match that finds this problem is as follows:

// <smpl>
@@
identifier x;
identifier request ~= "pci_request.*|pci_resource.*";
@@

(
* x->irq
|
* x->resource
|
* request(x, ...)
)
 ...
*pci_enable_device(x)
// </smpl>

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: added spaces around '||'

Cleared checkpatch ERROR: spaces required around that '||'

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Drop unnecessary null test

list_for_each_entry binds its first argument to a non-null value, and thus
any null test on the value of that argument is superfluous.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
iterator I;
expression x;
statement S;
@@

I(x,...) { <...
- if (x != NULL || ...)
  S
  ...> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rt2860: rtmp: Fixed coding style issue in rtmp.h

This patch fixes a whitespace issue detected by checkpatch.pl

Signed-off-by: Jacob Smith <tarinaky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: r8712u: Add TODO to driver files

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: r8712u: Update driver version to v7_0.20100831

Signed-off-by: Albert Wang <albert_wang@realtek.com.tw>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>