platform/adaptation/renesas_rcar/renesas_kernel.git
13 years agoMerge branch 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msm
Linus Torvalds [Thu, 6 Jan 2011 21:36:30 +0000 (13:36 -0800)]
Merge branch 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msm

* 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msm: (35 commits)
  mmc: msm_sdcc: Check for only DATA_END interrupt to end a request
  mmc: msm_sdcc: Fix bug in PIO mode when data size is not word aligned
  mmc: msm_sdcc: Reset SDCC in case of data transfer errors
  mmc: msm_sdcc: Add prog done interrupt support
  mmc: msm_sdcc: Fix possible circular locking dependency warning
  MSM: Add USB support for MSM7x30
  MSM: Add USB suport for QSD8x50
  msm: initial framebuffer support
  msm: add handling for clocks tagged as CLK_MINMAX
  msm: trout: change name of pmdh_clk to mddi_clk
  msm: add CLK_MINMAX to pmdh_clk
  msm: trout: add gpio_to_irq
  msm: iommu: Use the correct memory allocation flag
  msm_serial: Remove redundant unlikely()
  msm: iommu: Miscellaneous code cleanup
  msm: iommu: Support cache-coherent memory access
  msm: iommu: Definitions for extended memory attributes
  msm: iommu: Kconfig dependency for the IOMMU API
  msm: iommu: Check if device is already attached
  msm: iommu: Kconfig item for cacheable page tables
  ...

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6
Linus Torvalds [Thu, 6 Jan 2011 21:35:12 +0000 (13:35 -0800)]
Merge git://git./linux/kernel/git/lethal/fbdev-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (55 commits)
  video: udlfb: Kill off special printk wrappers, use pr_fmt().
  video: udlfb: Kill off some magic constants for EDID sizing.
  video: udlfb: deifdefify (yes, that's a word).
  fbdev: modedb: Add a new mode for 864x480 TAAL panels.
  drivers/video/i810/i810-i2c.c: fix i2c bus handling
  video: Fix the HGA framebuffer driver
  drivers/video/carminefb.c: improve error handling
  video: imxfb: Fix the maximum value for yres
  fbdev: sh_mobile_lcdcfb: Enable 32 bpp and 24 bpp support
  fbdev: sh_mipi_dsi: use platform provided register layout and values
  ARM: mach-shmobile: specify sh7372 MIPI DSI register layout
  fbdev: sh_mipi_dsi: support different register layouts
  ARM: mach-shmobile: improve MIPI DSI clock configuration
  fbdev: sh-mobile: implement MIPI DSI runtime PM support
  sisfb: eliminate compiler warnings
  sisfb: delete unused register I/O macros
  sisfb: replace setSISIDXREG with SiS_SetRegANDOR
  sisfb: replace andSISIDXREG with SiS_SetRegAND
  sisfb: replace orSISIDXREG with SiS_SetRegOR
  sisfb: replace outSISIDXREG with SiS_SetReg
  ...

13 years agoMerge branch 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...
Linus Torvalds [Thu, 6 Jan 2011 21:34:45 +0000 (13:34 -0800)]
Merge branch 'sh-latest' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: include Migo-R TS driver in Migo-R defconfig
  sh: correct definitions to access stack pointers
  sh: Tidy up SH-4A unaligned load support.
  dma: shdma: NMI support.
  sh: mach-sdk7786: Handle baseboard NMI source selection.
  sh: mach-rsk: Add polled GPIO buttons support for RSK+7203.
  sh: Break out cpuinfo_op procfs bits.
  sh: Enable optional gpiolib for all CPUs with pinmux tables.
  sh: migrate SH_CLK_MD to mode pin API.
  sh: machvec IO death.

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
Linus Torvalds [Thu, 6 Jan 2011 20:30:19 +0000 (12:30 -0800)]
Merge git://git./linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1436 commits)
  cassini: Use local-mac-address prom property for Cassini MAC address
  net: remove the duplicate #ifdef __KERNEL__
  net: bridge: check the length of skb after nf_bridge_maybe_copy_header()
  netconsole: clarify stopping message
  netconsole: don't announce stopping if nothing happened
  cnic: Fix the type field in SPQ messages
  netfilter: fix export secctx error handling
  netfilter: fix the race when initializing nf_ct_expect_hash_rnd
  ipv4: IP defragmentation must be ECN aware
  net: r6040: Return proper error for r6040_init_one
  dcb: use after free in dcb_flushapp()
  dcb: unlock on error in dcbnl_ieee_get()
  net: ixp4xx_eth: Return proper error for eth_init_one
  include/linux/if_ether.h: Add #define ETH_P_LINK_CTL for HPNA and wlan local tunnel
  net: add POLLPRI to sock_def_readable()
  af_unix: Avoid socket->sk NULL OOPS in stream connect security hooks.
  net_sched: pfifo_head_drop problem
  mac80211: remove stray extern
  mac80211: implement off-channel TX using hw r-o-c offload
  mac80211: implement hardware offload for remain-on-channel
  ...

13 years agocassini: Use local-mac-address prom property for Cassini MAC address
Richard Mortimer [Thu, 6 Jan 2011 19:50:30 +0000 (11:50 -0800)]
cassini: Use local-mac-address prom property for Cassini MAC address

Fallback on the local-mac-address prom property if the Cassini device
does not have an address programmed in the VPD ROM. This uses the same
technique as implemented by the sungem driver.

The problem was reported by Frans van Berckel using Debian kernel 2.6.34-7
on Sun Fire V440. udev was assigning a new eth<n> device name on each reboot
because the cassini driver was using a random MAC address.

Fix tested on 2.6.34-7 and 2.6.37 Sun Fire V440. Compile tested against
2.6.36 davem/sparc-2.6.git

Reported-by: Frans van Berckel <fberckel@xs4all.nl>
Tested-by: Frans van Berckel <fberckel@xs4all.nl>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Richard Mortimer <richm@oldelvet.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: remove the duplicate #ifdef __KERNEL__
Changli Gao [Thu, 6 Jan 2011 19:41:42 +0000 (11:41 -0800)]
net: remove the duplicate #ifdef __KERNEL__

Since we are already in #ifdef __KERNEL__, we don't need to check it
again.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: bridge: check the length of skb after nf_bridge_maybe_copy_header()
Changli Gao [Sat, 25 Dec 2010 03:41:30 +0000 (03:41 +0000)]
net: bridge: check the length of skb after nf_bridge_maybe_copy_header()

Since nf_bridge_maybe_copy_header() may change the length of skb,
we should check the length of skb after it to handle the ppoe skbs.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonetconsole: clarify stopping message
Ferenc Wagner [Thu, 6 Jan 2011 05:11:20 +0000 (05:11 +0000)]
netconsole: clarify stopping message

Signed-off-by: Ferenc Wagner <wferi@niif.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonetconsole: don't announce stopping if nothing happened
Ferenc Wagner [Thu, 6 Jan 2011 05:11:19 +0000 (05:11 +0000)]
netconsole: don't announce stopping if nothing happened

Signed-off-by: Ferenc Wagner <wferi@niif.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocnic: Fix the type field in SPQ messages
Michael Chan [Wed, 5 Jan 2011 15:14:13 +0000 (15:14 +0000)]
cnic: Fix the type field in SPQ messages

The new firmware interface requires each Slow Path Queue (SPQ) message's
type field to include the function number.  The existing code does not
do this consistently.  We fix this by OR'ing in the function number
into the type field centrally in cnic_submit_kwqe_16().

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonetfilter: fix export secctx error handling
Pablo Neira Ayuso [Thu, 6 Jan 2011 19:25:00 +0000 (11:25 -0800)]
netfilter: fix export secctx error handling

In 1ae4de0cdf855305765592647025bde55e85e451, the secctx was exported
via the /proc/net/netfilter/nf_conntrack and ctnetlink interfaces
instead of the secmark.

That patch introduced the use of security_secid_to_secctx() which may
return a non-zero value on error.

In one of my setups, I have NF_CONNTRACK_SECMARK enabled but no
security modules. Thus, security_secid_to_secctx() returns a negative
value that results in the breakage of the /proc and `conntrack -L'
outputs. To fix this, we skip the inclusion of secctx if the
aforementioned function fails.

This patch also fixes the dynamic netlink message size calculation
if security_secid_to_secctx() returns an error, since its logic is
also wrong.

This problem exists in Linux kernel >= 2.6.37.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonetfilter: fix the race when initializing nf_ct_expect_hash_rnd
Changli Gao [Wed, 5 Jan 2011 04:23:23 +0000 (04:23 +0000)]
netfilter: fix the race when initializing nf_ct_expect_hash_rnd

Since nf_ct_expect_dst_hash() may be called without nf_conntrack_lock
locked, nf_ct_expect_hash_rnd should be initialized in the atomic way.

In this patch, we use nf_conntrack_hash_rnd instead of
nf_ct_expect_hash_rnd.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv4: IP defragmentation must be ECN aware
Eric Dumazet [Wed, 5 Jan 2011 07:52:55 +0000 (07:52 +0000)]
ipv4: IP defragmentation must be ECN aware

RFC3168 (The Addition of Explicit Congestion Notification to IP)
states :

5.3.  Fragmentation

   ECN-capable packets MAY have the DF (Don't Fragment) bit set.
   Reassembly of a fragmented packet MUST NOT lose indications of
   congestion.  In other words, if any fragment of an IP packet to be
   reassembled has the CE codepoint set, then one of two actions MUST be
   taken:

      * Set the CE codepoint on the reassembled packet.  However, this
        MUST NOT occur if any of the other fragments contributing to
        this reassembly carries the Not-ECT codepoint.

      * The packet is dropped, instead of being reassembled, for any
        other reason.

This patch implements this requirement for IPv4, choosing the first
action :

If one fragment had NO-ECT codepoint
        reassembled frame has NO-ECT
ElIf one fragment had CE codepoint
        reassembled frame has CE

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: r6040: Return proper error for r6040_init_one
Axel Lin [Tue, 4 Jan 2011 22:40:04 +0000 (22:40 +0000)]
net: r6040: Return proper error for r6040_init_one

Return -ENOMEM instead of 0 for the case of mdiobus_alloc and kmalloc failure.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodcb: use after free in dcb_flushapp()
Dan Carpenter [Tue, 4 Jan 2011 21:03:44 +0000 (21:03 +0000)]
dcb: use after free in dcb_flushapp()

The original code has a use after free bug because it's not using the
_safe() version of the list_for_each_entry() macro.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodcb: unlock on error in dcbnl_ieee_get()
Dan Carpenter [Tue, 4 Jan 2011 21:03:12 +0000 (21:03 +0000)]
dcb: unlock on error in dcbnl_ieee_get()

There is a "goto nla_put_failure" hidden inside the NLA_PUT() macro, but
we're holding the dcb_lock so we need to unlock first.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 6 Jan 2011 19:12:17 +0000 (11:12 -0800)]
Merge branch 'x86-mm-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mm: Initialize initial_page_table before paravirt jumps

13 years agonet: ixp4xx_eth: Return proper error for eth_init_one
Axel Lin [Tue, 4 Jan 2011 19:24:06 +0000 (19:24 +0000)]
net: ixp4xx_eth: Return proper error for eth_init_one

Return PTR_ERR(port->phydev) instead of 1 if phy_connect failed.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branches 'x86-alternatives-for-linus', 'x86-fpu-for-linus', 'x86-hwmon-for...
Linus Torvalds [Thu, 6 Jan 2011 19:11:50 +0000 (11:11 -0800)]
Merge branches 'x86-alternatives-for-linus', 'x86-fpu-for-linus', 'x86-hwmon-for-linus', 'x86-paravirt-for-linus', 'core-locking-for-linus' and 'irq-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, suspend: Avoid unnecessary smp alternatives switch during suspend/resume

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64, asm: Use fxsaveq/fxrestorq in more places

* 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hwmon: Add core threshold notification to therm_throt.c

* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, paravirt: Use native_halt on a halt, not native_safe_halt

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  locking, lockdep: Convert sprintf_symbol to %pS

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq: Better struct irqaction layout

13 years agoinclude/linux/if_ether.h: Add #define ETH_P_LINK_CTL for HPNA and wlan local tunnel
Henry Ptasinski [Tue, 4 Jan 2011 16:07:14 +0000 (16:07 +0000)]
include/linux/if_ether.h: Add #define ETH_P_LINK_CTL for HPNA and wlan local tunnel

Ethertype used by HPNA control protocols (LARQ, rate, link, etc) and by
Broadcom wlan drivers for local signalling.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 6 Jan 2011 19:09:57 +0000 (11:09 -0800)]
Merge branch 'x86-uv-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV, BAU: Extend for more than 16 cpus per socket
  x86, UV: Fix the effect of extra bits in the hub nodeid register
  x86, UV: Add common uv_early_read_mmr() function for reading MMRs

13 years agoMerge branch 'x86-tsc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 6 Jan 2011 19:08:14 +0000 (11:08 -0800)]
Merge branch 'x86-tsc-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-tsc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Check tsc available/disabled in the delayed init function
  x86: Improve TSC calibration using a delayed workqueue
  x86: Make tsc=reliable override boot time stability checks

13 years agoMerge branch 'x86-security-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 6 Jan 2011 19:07:33 +0000 (11:07 -0800)]
Merge branch 'x86-security-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-security-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  module: Move RO/NX module protection to after ftrace module update
  x86: Resume trampoline must be executable
  x86: Add RO/NX protection for loadable kernel modules
  x86: Add NX protection for kernel data
  x86: Fix improper large page preservation

13 years agoMerge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 6 Jan 2011 19:06:31 +0000 (11:06 -0800)]
Merge branch 'x86-platform-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, earlyprintk: Move mrst early console to platform/ and fix a typo
  x86, apbt: Setup affinity for apb timers acting as per-cpu timer
  ce4100: Add errata fixes for UART on CE4100
  x86: platform: Move iris to x86/platform where it belongs
  x86, mrst: Check platform_device_register() return code
  x86/platform: Add Eurobraille/Iris power off support
  x86, mrst: Add explanation for using 1960 as the year offset for vrtc
  x86, mrst: Fix dependencies of "select INTEL_SCU_IPC"
  x86, mrst: The shutdown for MRST requires the SCU IPC mechanism
  x86: Ce4100: Add reboot_fixup() for CE4100
  ce4100: Add PCI register emulation for CE4100
  x86: Add CE4100 platform support
  x86: mrst: Set vRTC's IRQ to level trigger type
  x86: mrst: Add audio driver bindings
  rtc: Add drivers/rtc/rtc-mrst.c
  x86: mrst: Add vrtc driver which serves as a wall clock device
  x86: mrst: Add Moorestown specific reboot/shutdown support
  x86: mrst: Parse SFI timer table for all timer configs
  x86/mrst: Add SFI platform device parsing code

13 years agoMerge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 6 Jan 2011 19:06:09 +0000 (11:06 -0800)]
Merge branch 'x86-microcode-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, microcode, AMD: Cleanup code a bit
  x86, microcode, AMD: Replace vmalloc+memset with vzalloc

13 years agoMerge branch 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 6 Jan 2011 19:05:21 +0000 (11:05 -0800)]
Merge branch 'x86-mce-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  apic, amd: Make firmware bug messages more meaningful
  mce, amd: Remove goto in threshold_create_device()
  mce, amd: Add helper functions to setup APIC
  mce, amd: Shorten local variables mci_misc_{hi,lo}
  mce, amd: Implement mce_threshold_block_init() helper function

13 years agoMerge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 6 Jan 2011 18:56:02 +0000 (10:56 -0800)]
Merge branch 'x86-cpu-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix included-by file reference comments
  x86, cpu: Only CPU features determine NX capabilities
  x86, cpu: Call verify_cpu during 32bit CPU startup
  x86, cpu: Clear XD_DISABLED flag on Intel to regain NX
  x86, cpu: Rename verify_cpu_64.S to verify_cpu.S

13 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Thu, 6 Jan 2011 18:55:42 +0000 (10:55 -0800)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next-2.6

13 years agonet: add POLLPRI to sock_def_readable()
Eric Dumazet [Thu, 6 Jan 2011 18:54:29 +0000 (10:54 -0800)]
net: add POLLPRI to sock_def_readable()

Leonardo Chiquitto found poll() could block forever on tcp sockets and
Urgent data was received, if the event flag only contains POLLPRI.

He did a bisection and found commit 4938d7e0233 (poll: avoid extra
wakeups in select/poll) was the source of the problem.

Problem is TCP sockets use standard sock_def_readable() function for
their sk_data_ready() handler, and sock_def_readable() doesnt signal
POLLPRI.

Only TCP is affected by the problem. Adding POLLPRI to the list of flags
might trigger unnecessary schedules, but URGENT handling is such a
seldom used feature this seems a good compromise.

Thanks a lot to Leonardo for providing the bisection result and a test
program as well.

Reference : http://www.spinics.net/lists/netdev/msg151793.html

Reported-and-bisected-by: Leonardo Chiquitto <leonardo.lists@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 6 Jan 2011 18:51:36 +0000 (10:51 -0800)]
Merge branch 'x86-apic-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix APIC ID sizing bug on larger systems, clean up MAX_APICS confusion
  x86, acpi: Parse all SRAT cpu entries even above the cpu number limitation
  x86, acpi: Add MAX_LOCAL_APIC for 32bit
  x86: io_apic: Split setup_ioapic_ids_from_mpc()
  x86: io_apic: Fix CONFIG_X86_IO_APIC=n breakage
  x86: apic: Move probe_nr_irqs_gsi() into ioapic_init_mappings()
  x86: Allow platforms to force enable apic

13 years agoMerge branch 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 6 Jan 2011 18:50:28 +0000 (10:50 -0800)]
Merge branch 'x86-amd-nb-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, cacheinfo: Cleanup L3 cache index disable support
  x86, amd-nb: Cleanup AMD northbridge caching code
  x86, amd-nb: Complete the rename of AMD NB and related code

13 years agoMerge branch 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 6 Jan 2011 18:42:43 +0000 (10:42 -0800)]
Merge branch 'timers-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  MAINTAINERS: Update timer related entries
  timers: Use this_cpu_read
  timerqueue: Make timerqueue_getnext() static inline
  hrtimer: fix timerqueue conversion flub
  hrtimers: Convert hrtimers to use timerlist infrastructure
  timers: Fixup allmodconfig build issue
  timers: Rename timerlist infrastructure to timerqueue
  timers: Introduce timerlist infrastructure.
  hrtimer: Remove stale comment on curr_timer
  timer: Warn when del_timer_sync() is called in hardirq context
  timer: Del_timer_sync() can be used in softirq context
  timer: Make try_to_del_timer_sync() the same on SMP and UP
  posix-timers: Annotate lock_timer()
  timer: Permit statically-declared work with deferrable timers
  time: Use ARRAY_SIZE macro in timecompare.c
  timer: Initialize the field slack of timer_list
  timer_list: Remove alignment padding on 64 bit when CONFIG_TIMER_STATS
  time: Compensate for rounding on odd-frequency clocksources

Fix up trivial conflict in MAINTAINERS

13 years agoMerge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 6 Jan 2011 18:23:33 +0000 (10:23 -0800)]
Merge branch 'sched-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
  sched: Change wait_for_completion_*_timeout() to return a signed long
  sched, autogroup: Fix reference leak
  sched, autogroup: Fix potential access to freed memory
  sched: Remove redundant CONFIG_CGROUP_SCHED ifdef
  sched: Fix interactivity bug by charging unaccounted run-time on entity re-weight
  sched: Move periodic share updates to entity_tick()
  printk: Use this_cpu_{read|write} api on printk_pending
  sched: Make pushable_tasks CONFIG_SMP dependant
  sched: Add 'autogroup' scheduling feature: automated per session task groups
  sched: Fix unregister_fair_sched_group()
  sched: Remove unused argument dest_cpu to migrate_task()
  mutexes, sched: Introduce arch_mutex_cpu_relax()
  sched: Add some clock info to sched_debug
  cpu: Remove incorrect BUG_ON
  cpu: Remove unused variable
  sched: Fix UP build breakage
  sched: Make task dump print all 15 chars of proc comm
  sched: Update tg->shares after cpu.shares write
  sched: Allow update_cfs_load() to update global load
  sched: Implement demand based update_cfs_load()
  ...

13 years agoMerge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 6 Jan 2011 18:17:26 +0000 (10:17 -0800)]
Merge branch 'perf-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (146 commits)
  tools, perf: Documentation for the power events API
  perf: Add calls to suspend trace point
  perf script: Make some lists static
  perf script: Use the default lost event handler
  perf session: Warn about errors when processing pipe events too
  perf tools: Fix perf_event.h header usage
  perf test: Clarify some error reports in the open syscall test
  x86, NMI: Add touch_nmi_watchdog to io_check_error delay
  x86: Avoid calling arch_trigger_all_cpu_backtrace() at the same time
  x86: Only call smp_processor_id in non-preempt cases
  perf timechart: Adjust perf timechart to the new power events
  perf: Clean up power events by introducing new, more generic ones
  perf: Do not export power_frequency, but power_start event
  perf test: Add test for counting open syscalls
  perf evsel: Auto allocate resources needed for some methods
  perf evsel: Use {cpu,thread}_map to shorten list of parameters
  perf tools: Refactor all_tids to hold nr and the map
  perf tools: Refactor cpumap to hold nr and the map
  perf evsel: Introduce per cpu and per thread open helpers
  perf evsel: Steal the counter reading routines from stat
  ...

13 years agoMerge branch 'core-futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 6 Jan 2011 18:07:05 +0000 (10:07 -0800)]
Merge branch 'core-futexes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: Add futex_q static initializer
  futex: Replace fshared and clockrt with combined flags
  futex: Cleanup stale fshared flag interfaces

13 years agoMerge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 6 Jan 2011 18:06:26 +0000 (10:06 -0800)]
Merge branch 'core-rcu-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: remove unused __list_for_each_rcu() macro
  rculist: fix borked __list_for_each_rcu() macro
  rcu: reduce __call_rcu()-induced contention on rcu_node structures
  rcu: limit rcu_node leaf-level fanout
  rcu: fine-tune grace-period begin/end checks
  rcu: Keep gpnum and completed fields synchronized
  rcu: Stop chasing QS if another CPU did it for us
  rcu: increase synchronize_sched_expedited() batching
  rcu: Make synchronize_srcu_expedited() fast if running readers
  rcu: fix race condition in synchronize_sched_expedited()
  rcu: update documentation/comments for Lai's adoption patch
  rcu,cleanup: simplify the code when cpu is dying
  rcu,cleanup: move synchronize_sched_expedited() out of sched.c
  rcu: get rid of obsolete "classic" names in TREE_RCU tracing
  rcu: Distinguish between boosting and boosted
  rcu: document TINY_RCU and TINY_PREEMPT_RCU tracing.
  rcu: add tracing for TINY_RCU and TINY_PREEMPT_RCU
  rcu: priority boosting for TINY_PREEMPT_RCU
  rcu: move TINY_RCU from softirq to kthread
  rcu: add priority-inversion testing to rcutorture

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
Linus Torvalds [Thu, 6 Jan 2011 18:01:23 +0000 (10:01 -0800)]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-nmw

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: Don't flush delete workqueue when releasing the transaction lock
  GFS2: fsck.gfs2 reported statfs error after gfs2_grow
  GFS2: Merge glock state fields into a bitfield
  GFS2: Fix uninitialised error value in previous patch
  GFS2: fix recursive locking during rindex truncates
  GFS2: reread rindex when necessary to grow rindex
  GFS2: Remove duplicate #defines from glock.h
  GFS2: Clean up of gdlm_lock function
  GFS2: Allow gfs2 to update quota usage values through the quotactl interface
  GFS2: fs/gfs2/glock.h: Add __attribute__((format(printf,2,3)) to gfs2_print_dbg
  GFS2: fs/gfs2/glock.c: Use printf extension %pV
  GFS2: Clean up duplicated setattr code
  GFS2: Remove unreachable calls to vmtruncate
  GFS2: fs/gfs2/glock.c: Convert sprintf_symbol to %pS
  GFS2: Change two WQ_RESCUERs into WQ_MEM_RECLAIM

13 years agokernel-doc: code reorganization
Randy Dunlap [Thu, 6 Jan 2011 00:28:43 +0000 (16:28 -0800)]
kernel-doc: code reorganization

Move 'main' code vs. subroutines around so that they are not so
intermixed, for better readability/understanding (relative to Perl).
It was messy to follow the primary flow of code execution with the
code being mixed.  Now the code begins with data initialization,
followed by all subroutines, then ends with the main code execution.

This is almost totally source code movement, with a few changes as
needed for forward declarations.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoDocumentation: update kernel-docs.txt
Nicolas Kaiser [Thu, 6 Jan 2011 00:27:53 +0000 (16:27 -0800)]
Documentation: update kernel-docs.txt

Fixed typos, and removed duplicated entries.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoDocumentation/dontdiff: add further autogenerated files to ignore list
Michael Prokop [Thu, 6 Jan 2011 00:27:15 +0000 (16:27 -0800)]
Documentation/dontdiff: add further autogenerated files to ignore list

Mainly resulting from (but not limited to) autogenerated files of
lib/raid6 and drivers/gpu/drm/radeon. List generated as result of
a diff of a clean 2.6.36 tree against a built one.

Signed-off-by: Michael Prokop <mika@grml.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Paul Mundt [Thu, 6 Jan 2011 09:27:34 +0000 (18:27 +0900)]
Merge branch 'master' of /linux/kernel/git/torvalds/linux-2.6

Conflicts:
drivers/video/sh_mobile_lcdcfb.c

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux...
Paul Mundt [Thu, 6 Jan 2011 09:24:07 +0000 (18:24 +0900)]
Merge branch 'master' of /linux/kernel/git/torvalds/linux-2.6 into sh-latest

Conflicts:
arch/sh/kernel/cpu/sh2a/clock-sh7201.c

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agoMerge branch 'fbdev/udlfb'
Paul Mundt [Thu, 6 Jan 2011 09:10:09 +0000 (18:10 +0900)]
Merge branch 'fbdev/udlfb'

13 years agovideo: udlfb: Kill off special printk wrappers, use pr_fmt().
Paul Mundt [Thu, 6 Jan 2011 09:07:54 +0000 (18:07 +0900)]
video: udlfb: Kill off special printk wrappers, use pr_fmt().

This kills off all of the dl_xxx() printk wrappers and simply stubs in a
pr_fmt() definition to accomplish the same thing.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agovideo: udlfb: Kill off some magic constants for EDID sizing.
Paul Mundt [Thu, 6 Jan 2011 09:04:02 +0000 (18:04 +0900)]
video: udlfb: Kill off some magic constants for EDID sizing.

The edid length is fixed, so use the standard definition consistently.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agovideo: udlfb: deifdefify (yes, that's a word).
Paul Mundt [Thu, 6 Jan 2011 08:29:24 +0000 (17:29 +0900)]
video: udlfb: deifdefify (yes, that's a word).

udlfb selects all of the options it presently ifdef conditionalizes, so
none of the statements have any effect outside of aggravating eye strain.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agosh: include Migo-R TS driver in Migo-R defconfig
Magnus Damm [Thu, 6 Jan 2011 05:33:15 +0000 (05:33 +0000)]
sh: include Migo-R TS driver in Migo-R defconfig

This patch enables the Migo-R specific touch screen
driver in the Migo-R defconfig.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agofbdev: modedb: Add a new mode for 864x480 TAAL panels.
Mayuresh Janorkar [Thu, 6 Jan 2011 07:02:42 +0000 (16:02 +0900)]
fbdev: modedb: Add a new mode for 864x480 TAAL panels.

This adds a new entry to the modedb for 864x480 TAAL panels, the default
configuration for many OMAP boards. This enables omapfb to make use of
the standard mode parsing.

Signed-off-by: Mayuresh Janorkar <mayur@ti.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agodrivers/video/i810/i810-i2c.c: fix i2c bus handling
Stefani Seibold [Mon, 3 Jan 2011 09:28:59 +0000 (09:28 +0000)]
drivers/video/i810/i810-i2c.c: fix i2c bus handling

These patch fix a longstanding bug in the i810 frame buffer driver.

The handling of the i2c bus is wrong: A 1 bit should not written to the
i2c, these will be done by switch the i2c to input. Driving an 1 bit
active is against the i2c spec.

An active driven of a 1 bit will result in very strange error, depending
which side is the more powerful one. In my case it depends on the
temperature of the Display-Controller-EEprom: With an cold eprom a got
the correct EDID datas, with a warm one some of the 1 bits was 0 :-(

The same bug is also in the intelfb driver in the file
drivers/video/intelfb/intelfb_i2c.c. The functions intelfb_gpio_setscl()
and intelfb_gpio_setsda() do drive the 1 bit active to the i2c bus. But
since i have no card which is used by the intelfb driver i cannot fix
it.

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agovideo: Fix the HGA framebuffer driver
Brent Cook [Fri, 31 Dec 2010 05:56:50 +0000 (05:56 +0000)]
video: Fix the HGA framebuffer driver

Resurrected some old hardware and fixed up the hgafb driver to work
again. Only tested with fbcon, since most fbdev-based software appears
to only support 12bpp and up. It does not appear that this driver has
worked for at least the entire 2.6.x series, perhaps since 2002.

Hercules graphics hardware uses packed pixels horizontally, but rows are
not linear. In other words, the pixels are not packed vertically. This
means that custom imageblit, fillrect and copyarea need to be written
specific to the hardware.

 * Removed the experimental acceleration option, since it is required
   for the hardware to work.
 * Fixed imageblit to work with fb_image's wider than 8 pixels.
 * Updated configuration text (HGA hardware is from 1984)

Signed-off-by: Brent Cook <busterb@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agodrivers/video/carminefb.c: improve error handling
Julia Lawall [Sun, 2 Jan 2011 14:27:42 +0000 (14:27 +0000)]
drivers/video/carminefb.c: improve error handling

This code had an error handling goto to the wrong place, a misplaced
release_mem_region, and a duplicated release_mem_region.

The semantic match that finds the double release_mem_region is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
expression e1,e2,e3;
position p1,p2,p3;
@@
release_mem_region@p1(e1, e2)@p3;
... when != request_mem_region(e1,e2,e3)
release_mem_region(e1, e2)@p2;

@@
expression e <= r.e1,e3;
expression r.e1,e2;
position r.p1,r.p2,r.p3,p!=r.p1;
@@
*release_mem_region(e1, e2)@p3;
... when != e = e3
*release_mem_region@p(e1, e2)@p2;// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agovideo: imxfb: Fix the maximum value for yres
Fabio Estevam [Fri, 24 Dec 2010 12:28:24 +0000 (12:28 +0000)]
video: imxfb: Fix the maximum value for yres

MX27 and MX25 have 10 bits in the YMAX field of LCDC Size Register.

Fix the maximum value for yres.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agofbdev: sh_mobile_lcdcfb: Enable 32 bpp and 24 bpp support
Magnus Damm [Wed, 5 Jan 2011 10:21:00 +0000 (10:21 +0000)]
fbdev: sh_mobile_lcdcfb: Enable 32 bpp and 24 bpp support

This patch extends the LCDC driver with 24 bpp
and 32 bpp support.

These modes have been kept disabled earlier due
to dependencies between the potential two LCDC
channels that are exported as two separate
framebuffer devices. The dependency boils down
to a byte swap register that is shared between
multiple channels.

With this patch applied all single channel LCDC
hardware can chose freely from 16, 24 and 32 bpp.
Dual channel LCDC must stick to the same setup
for both channels.

Without this patch only 16 bpp is fully supported.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agoaf_unix: Avoid socket->sk NULL OOPS in stream connect security hooks.
David S. Miller [Wed, 5 Jan 2011 23:38:53 +0000 (15:38 -0800)]
af_unix: Avoid socket->sk NULL OOPS in stream connect security hooks.

unix_release() can asynchornously set socket->sk to NULL, and
it does so without holding the unix_state_lock() on "other"
during stream connects.

However, the reverse mapping, sk->sk_socket, is only transitioned
to NULL under the unix_state_lock().

Therefore make the security hooks follow the reverse mapping instead
of the forward mapping.

Reported-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet_sched: pfifo_head_drop problem
Eric Dumazet [Wed, 5 Jan 2011 10:35:02 +0000 (10:35 +0000)]
net_sched: pfifo_head_drop problem

commit 57dbb2d83d100ea (sched: add head drop fifo queue)
introduced pfifo_head_drop, and broke the invariant that
sch->bstats.bytes and sch->bstats.packets are COUNTER (increasing
counters only)

This can break estimators because est_timer() handles unsigned deltas
only. A decreasing counter can then give a huge unsigned delta.

My mid term suggestion would be to change things so that
sch->bstats.bytes and sch->bstats.packets are incremented in dequeue()
only, not at enqueue() time. We also could add drop_bytes/drop_packets
and provide estimations of drop rates.

It would be more sensible anyway for very low speeds, and big bursts.
Right now, if we drop packets, they still are accounted in byte/packets
abolute counters and rate estimators.

Before this mid term change, this patch makes pfifo_head_drop behavior
similar to other qdiscs in case of drops :
Dont decrement sch->bstats.bytes and sch->bstats.packets

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agomac80211: remove stray extern
Johannes Berg [Wed, 22 Dec 2010 09:15:52 +0000 (10:15 +0100)]
mac80211: remove stray extern

Somehow this snuck into my earlier patch, and
only now did I see a compiler warning:

net/mac80211/led.c:218:13: warning: function '__ieee80211_create_tpt_led_trigger' with external linkage has definition

Remove the stray extern.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agomac80211: implement off-channel TX using hw r-o-c offload
Johannes Berg [Sat, 18 Dec 2010 16:20:48 +0000 (17:20 +0100)]
mac80211: implement off-channel TX using hw r-o-c offload

When the driver has remain-on-channel offload,
implement off-channel transmission using that
primitive.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agomac80211: implement hardware offload for remain-on-channel
Johannes Berg [Sat, 18 Dec 2010 16:20:47 +0000 (17:20 +0100)]
mac80211: implement hardware offload for remain-on-channel

This allows drivers to support remain-on-channel
offload if they implement smarter timing or need
to use a device implementation like iwlwifi.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Wed, 5 Jan 2011 21:06:25 +0000 (16:06 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6 into for-davem

Conflicts:
net/bluetooth/Makefile

13 years agotools, perf: Documentation for the power events API
Jean Pihet [Wed, 5 Jan 2011 18:49:02 +0000 (19:49 +0100)]
tools, perf: Documentation for the power events API

Provides documentation for the following:
- the new power trace API,
- the old (legacy) power trace API,
- the DEPRECATED Kconfig option usage.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: trenn@suse.de
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: linux-pm@lists.linux-foundation.org
LKML-Reference: <1294253342-29056-3-git-send-email-j-pihet@ti.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoperf: Add calls to suspend trace point
Jean Pihet [Wed, 5 Jan 2011 18:49:01 +0000 (19:49 +0100)]
perf: Add calls to suspend trace point

Uses the machine_suspend trace point, called from the
generic kernel suspend_devices_and_enter function.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Arjan van de Ven <arjan@linux.intel.com>
CC: Thomas Renninger <trenn@suse.de>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-pm@lists.linux-foundation.org
LKML-Reference: <1294253342-29056-2-git-send-email-j-pihet@ti.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoath9k: correct MODULE_PARM_DESC parameters for force_new_ani
John W. Linville [Wed, 5 Jan 2011 19:05:00 +0000 (14:05 -0500)]
ath9k: correct MODULE_PARM_DESC parameters for force_new_ani

Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath5k: qualify global modparam_nohwcrypt variable
John W. Linville [Wed, 5 Jan 2011 14:39:59 +0000 (09:39 -0500)]
ath5k: qualify global modparam_nohwcrypt variable

Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k: qualify global modparam_nohwcrypt variable
John W. Linville [Wed, 5 Jan 2011 14:39:17 +0000 (09:39 -0500)]
ath9k: qualify global modparam_nohwcrypt variable

Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Wed, 5 Jan 2011 19:35:41 +0000 (14:35 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

13 years agoperf script: Make some lists static
Arnaldo Carvalho de Melo [Tue, 4 Jan 2011 18:32:52 +0000 (16:32 -0200)]
perf script: Make some lists static

Not accessed outside builtin-script, so make them static.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
13 years agoperf script: Use the default lost event handler
Arnaldo Carvalho de Melo [Tue, 4 Jan 2011 18:27:30 +0000 (16:27 -0200)]
perf script: Use the default lost event handler

That already does what was being done here. The warning is now unconditionally
given by __perf_session__process_pipe_events, just like for non pipe processing.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
13 years agoperf session: Warn about errors when processing pipe events too
Arnaldo Carvalho de Melo [Tue, 4 Jan 2011 18:25:15 +0000 (16:25 -0200)]
perf session: Warn about errors when processing pipe events too

Just like we do at __perf_session__process_events

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
13 years agoperf tools: Fix perf_event.h header usage
Stephane Eranian [Tue, 4 Jan 2011 14:30:01 +0000 (16:30 +0200)]
perf tools: Fix perf_event.h header usage

This patch fixes the usage of the perf_event.h header file
between command modules and the supporting code in util.

It is necessary to ensure that ALL files use the SAME
perf_event.h header from the kernel source tree.

There were a couple of #include <linux/perf_event.h> mixed
with #include "../../perf_event.h".

This caused issues on some distros because of mismatch
in the layout of struct perf_event_attr. That eventually
led perf stat to segfault.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <4d233cf0.2308e30a.7b00.ffffc187@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
13 years agoperf test: Clarify some error reports in the open syscall test
Arnaldo Carvalho de Melo [Tue, 4 Jan 2011 12:40:08 +0000 (10:40 -0200)]
perf test: Clarify some error reports in the open syscall test

Rebooted my devel machine, first thing I ran was perf test, that expects
debugfs to be mounted, test fails. Be more clear about it.

Also add missing newlines and add more informative message when
sys_perf_event_open fails.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
13 years agox86, NMI: Add touch_nmi_watchdog to io_check_error delay
Huang Ying [Wed, 5 Jan 2011 03:38:09 +0000 (22:38 -0500)]
x86, NMI: Add touch_nmi_watchdog to io_check_error delay

Prevent the long delay in io_check_error making NMI watchdog
timeout.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
LKML-Reference: <1294198689-15447-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agox86: Avoid calling arch_trigger_all_cpu_backtrace() at the same time
Dongdong Deng [Wed, 5 Jan 2011 03:38:08 +0000 (22:38 -0500)]
x86: Avoid calling arch_trigger_all_cpu_backtrace() at the same time

The spin_lock_debug/rcu_cpu_stall detector uses
trigger_all_cpu_backtrace() to dump cpu backtrace.
Therefore it is possible that trigger_all_cpu_backtrace()
could be called at the same time on different CPUs, which
triggers and 'unknown reason NMI' warning. The following case
illustrates the problem:

      CPU1                    CPU2                     ...   CPU N
                       trigger_all_cpu_backtrace()
                       set "backtrace_mask" to cpu mask
                               |
generate NMI interrupts  generate NMI interrupts       ...
    \                          |                               /
     \                         |                              /

The "backtrace_mask" will be cleaned by the first NMI interrupt
at nmi_watchdog_tick(), then the following NMI interrupts
generated by other cpus's arch_trigger_all_cpu_backtrace() will
be taken as unknown reason NMI interrupts.

This patch uses a test_and_set to avoid the problem, and stop
the arch_trigger_all_cpu_backtrace() from calling to avoid
dumping a double cpu backtrace info when there is already a
trigger_all_cpu_backtrace() in progress.

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Reviewed-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: fweisbec@gmail.com
LKML-Reference: <1294198689-15447-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Don Zickus <dzickus@redhat.com>
13 years agox86: Only call smp_processor_id in non-preempt cases
Don Zickus [Wed, 5 Jan 2011 03:38:07 +0000 (22:38 -0500)]
x86: Only call smp_processor_id in non-preempt cases

There are some paths that walk the die_chain with preemption on.
Make sure we are in an NMI call before we start doing anything.

This was triggered by do_general_protection calling notify_die
with DIE_GPF.

Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Don Zickus <dzickus@redhat.com>
LKML-Reference: <1294198689-15447-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMerge commit 'v2.6.37' into perf/core
Ingo Molnar [Wed, 5 Jan 2011 13:22:08 +0000 (14:22 +0100)]
Merge commit 'v2.6.37' into perf/core

Merge reason: Add the final .37 tree.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agosched: Change wait_for_completion_*_timeout() to return a signed long
NeilBrown [Wed, 5 Jan 2011 01:50:16 +0000 (12:50 +1100)]
sched: Change wait_for_completion_*_timeout() to return a signed long

wait_for_completion_*_timeout() can return:

   0: if the wait timed out
 -ve: if the wait was interrupted
 +ve: if the completion was completed.

As they currently return an 'unsigned long', the last two cases
are not easily distinguished which can easily result in buggy
code, as is the case for the recently added
wait_for_completion_interruptible_timeout() call in
net/sunrpc/cache.c

So change them both to return 'long'.  As MAX_SCHEDULE_TIMEOUT
is LONG_MAX, a large +ve return value should never overflow.

Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110105125016.64ccab0e@notabene.brown>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMerge commit 'v2.6.37' into sched/core
Ingo Molnar [Wed, 5 Jan 2011 13:14:42 +0000 (14:14 +0100)]
Merge commit 'v2.6.37' into sched/core

Merge reason: Merge the final .37 tree.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agox86: Fix APIC ID sizing bug on larger systems, clean up MAX_APICS confusion
Yinghai Lu [Wed, 5 Jan 2011 00:38:52 +0000 (16:38 -0800)]
x86: Fix APIC ID sizing bug on larger systems, clean up MAX_APICS confusion

Found one x2apic pre-enabled system, x2apic_mode suddenly get
corrupted after register some cpus, when compiled
CONFIG_NR_CPUS=255 instead of 512.

It turns out that generic_processor_info() ==> phyid_set(apicid,
phys_cpu_present_map) causes the problem.

phys_cpu_present_map is sized by MAX_APICS bits, and pre-enabled
system some cpus have an apic id > 255.

The variable after phys_cpu_present_map may get corrupted
silently:

 ffffffff828e8420 B phys_cpu_present_map
 ffffffff828e8440 B apic_verbosity
 ffffffff828e8444 B local_apic_timer_c2_ok
 ffffffff828e8448 B disable_apic
 ffffffff828e844c B x2apic_mode
 ffffffff828e8450 B x2apic_disabled
 ffffffff828e8454 B num_processors
 ...

Actually phys_cpu_present_map is referenced via apic id, instead
index. We should use MAX_LOCAL_APIC instead MAX_APICS.

For 64-bit it will be 32768 in all cases. BSS will increase by 4k bytes
on 64-bit:

text data bss dec filename
21696943 4193748 12787712 38678403 vmlinux.before
21696943 4193748 12791808 38682499 vmlinux.after

No change on 32bit.

Finally we can remove MAX_APCIS that was rather confusing.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4D23BD9C.3070102@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMerge branch 'common/fbdev-mipi' of master.kernel.org:/pub/scm/linux/kernel/git/letha...
Paul Mundt [Wed, 5 Jan 2011 08:30:20 +0000 (17:30 +0900)]
Merge branch 'common/fbdev-mipi' of /linux/kernel/git/lethal/sh-2.6

13 years agofbdev: sh_mipi_dsi: use platform provided register layout and values
Guennadi Liakhovetski [Wed, 29 Dec 2010 08:12:29 +0000 (08:12 +0000)]
fbdev: sh_mipi_dsi: use platform provided register layout and values

Different sh-mobile SoCs have variations in their MIPI DSI register layouts,
besides, different LCD panels require different configuration parameters. This
patch switches the driver to use platform-provided MIPI DSI parameters.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agoARM: mach-shmobile: specify sh7372 MIPI DSI register layout
Guennadi Liakhovetski [Wed, 29 Dec 2010 08:12:26 +0000 (08:12 +0000)]
ARM: mach-shmobile: specify sh7372 MIPI DSI register layout

Prepare the ap4evb board for the MIPI DSI driver transition to support

different register layouts.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agofbdev: sh_mipi_dsi: support different register layouts
Guennadi Liakhovetski [Wed, 29 Dec 2010 08:12:22 +0000 (08:12 +0000)]
fbdev: sh_mipi_dsi: support different register layouts

The register layout of the MIPI DSI unit on sh-mobile SoCs differ. Add platform
parameters to support such variations.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agoARM: mach-shmobile: improve MIPI DSI clock configuration
Guennadi Liakhovetski [Mon, 27 Dec 2010 10:23:09 +0000 (10:23 +0000)]
ARM: mach-shmobile: improve MIPI DSI clock configuration

Now, that the MIPI DSI driver implements runtime PM, we don't need anymore to
configure clocks statically in the platform code. This patch also adds a DSITX1
clock definition for sh7372 and attaches PHY clocks to respective devices.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agofbdev: sh-mobile: implement MIPI DSI runtime PM support
Guennadi Liakhovetski [Mon, 27 Dec 2010 10:23:05 +0000 (10:23 +0000)]
fbdev: sh-mobile: implement MIPI DSI runtime PM support

On SH-Mobile platforms using runtime PM with the MIPI DSI driver switches the
DSI Tx link clock on PM events.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agosh: correct definitions to access stack pointers
Roel Kluin [Sat, 1 Jan 2011 18:36:36 +0000 (18:36 +0000)]
sh: correct definitions to access stack pointers

A definition like:

#define regs_return_value(regs) ((regs)->regs[0])

called with regs_return_value(foo) will be preprocessed to:

((foo)->foo[0])
        ^^^
So to fix this to ensure the preprocessor compiles such calls correctly.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
13 years agoLinux 2.6.37
Linus Torvalds [Wed, 5 Jan 2011 00:50:19 +0000 (16:50 -0800)]
Linux 2.6.37

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 4 Jan 2011 21:55:49 +0000 (13:55 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ipv4/route.c: respect prefsrc for local routes
  bridge: stp: ensure mac header is set
  bridge: fix br_multicast_ipv6_rcv for paged skbs
  atl1: fix oops when changing tx/rx ring params
  drivers/atm/atmtcp.c: add missing atm_dev_put
  starfire: Fix dma_addr_t size test for MIPS
  tg3: fix return value check in tg3_read_vpd()
  Broadcom CNIC core network driver: fix mem leak on allocation failures in cnic_alloc_uio_rings()
  ISDN, Gigaset: Fix memory leak in do_disconnect_req()
  CAN: Use inode instead of kernel address for /proc file
  skfp: testing the wrong variable in skfp_driver_init()
  ppp: allow disabling multilink protocol ID compression
  ehea: Avoid changing vlan flags
  ueagle-atm: fix PHY signal initialization race

13 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Tue, 4 Jan 2011 19:57:25 +0000 (11:57 -0800)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

13 years agolibertas: down_interruptible() can return -EINTR, not EINTR
roel kluin [Mon, 3 Jan 2011 20:03:44 +0000 (12:03 -0800)]
libertas: down_interruptible() can return -EINTR, not EINTR

Fix test in lbs_spi_thread().  down_interruptible() can return -EINTR, but
not EINTR.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Dan Williams <dcbw@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agomac80211: fix some key comments and code
Johannes Berg [Mon, 3 Jan 2011 18:51:09 +0000 (19:51 +0100)]
mac80211: fix some key comments and code

The key documentation is slightly out of date, fix
that. Also, the list entry in the key struct is no
longer used that way, so list_del_init() isn't
necessary any more there.

Finally, ieee80211_key_link() is no longer invoked
under RCU read lock, but rather with an appropriate
station lock held.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_htc: Fix packet injection
Sujith Manoharan [Mon, 3 Jan 2011 15:52:18 +0000 (21:22 +0530)]
ath9k_htc: Fix packet injection

To inject a packet in monitor mode, a dummy station has
to be associated with the monitor interface in the target.
Failing to do this would result in a firmware crash on the device.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath5k: ath5k_eeprom_mode_from_channel() returns signed
Dan Carpenter [Mon, 3 Jan 2011 05:46:29 +0000 (08:46 +0300)]
ath5k: ath5k_eeprom_mode_from_channel() returns signed

ath5k_eeprom_mode_from_channel() returns -1 on error but we're storing
the result in "ee_mode" which is an unsigned char.  This breaks the
error handling.  This patch makes "ee_mode" an int.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k : few rate control clean ups
Mohammed Shafi Shajakhan [Fri, 31 Dec 2010 15:19:00 +0000 (20:49 +0530)]
ath9k : few rate control clean ups

Remove some obvious looking dead code and rename few functions

Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoRevert "mac80211: temporarily disable reorder release timer"
Christian Lamparter [Thu, 30 Dec 2010 16:29:53 +0000 (17:29 +0100)]
Revert "mac80211: temporarily disable reorder release timer"

This reverts enables the reorder release timer once again.

The issues laid out in:
<http://www.spinics.net/lists/linux-wireless/msg57214.html>

Have been addressed by:
mac80211: serialize rx path workers
mac80211: ignore PSM bit of reordered frames

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agomac80211: serialize rx path workers
Christian Lamparter [Thu, 30 Dec 2010 16:25:29 +0000 (17:25 +0100)]
mac80211: serialize rx path workers

This patch addresses the issue of serialization between
the main rx path and various reorder release timers.

<http://www.spinics.net/lists/linux-wireless/msg57214.html>

It converts the previously local "frames" queue into
a global rx queue [rx_skb_queue]. This way, everyone
(be it the main rx-path or some reorder release timeout)
can add frames to it.

Only one active rx handler worker [ieee80211_rx_handlers]
is needed. All other threads which have lost the race of
"runnning_rx_handler" can now simply "return", knowing that
the thread who had the "edge" will also take care of their
workload.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k: fix beacon restart on channel change
Rajkumar Manoharan [Thu, 30 Dec 2010 13:37:44 +0000 (19:07 +0530)]
ath9k: fix beacon restart on channel change

Restart the beacon timers only if the beacon
was already configured. Otherwise beacons timers
are restarted unnecessarily in unassociated state too.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoRevert "ath9k: Parse DTIM period from mac80211"
Mohammed Shafi Shajakhan [Thu, 30 Dec 2010 06:48:01 +0000 (12:18 +0530)]
Revert "ath9k: Parse DTIM period from mac80211"

This reverts commit 0ce3bcfc84900a64347b0fe1140229bd81314008.

Event though with the above commit we obtain the configured DTIM period
from the AP rather than always hardcoding it to '1', this seems to cause
problems under the following scenarios:
* Preventing association with broken AP's
* Adds latency in roaming
So its better to always use the safe value of '1' for dtim period

Cc: Jouni Malinen <Jouni.Malinen@Atheros.com>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agocfg80211: fix transposition of words in printk
Bob Copeland [Wed, 29 Dec 2010 22:09:02 +0000 (17:09 -0500)]
cfg80211: fix transposition of words in printk

Fixes the misplaced article in the following:

"cfg80211: Updating information on frequency 5785 MHz for
    20 a MHz width channel with regulatory rule:"

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agomac80211: Fix mesh portal communication with other mesh nodes.
Joel A Fernandes [Wed, 29 Dec 2010 01:28:11 +0000 (19:28 -0600)]
mac80211: Fix mesh portal communication with other mesh nodes.

Fixed a bug where if a mesh interface has a different MAC address from its bridge
interface, then it would not be able to send data traffic to any other mesh node.
This also adds support for communication between mesh nodes and external bridged
nodes by using a 6 address format if the source is a node within the mesh and the
destination is an external node proxied by a mesh portal.

Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_hw: fix dma descriptor rx error bit parsing
Felix Fietkau [Tue, 28 Dec 2010 14:46:16 +0000 (15:46 +0100)]
ath9k_hw: fix dma descriptor rx error bit parsing

An Rx DMA descriptor can have multiple error bits set, and some error
bits (e.g. MIC failure) are filtered by the driver based on other criteria.
Remove the 'else' in various error bit checks so that all error information
is properly passed to the driver.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath9k_htc: Move LED/RFKILL code to htc_drv_gpio.c
Sujith Manoharan [Tue, 28 Dec 2010 08:58:52 +0000 (14:28 +0530)]
ath9k_htc: Move LED/RFKILL code to htc_drv_gpio.c

And add the copyright/license header.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>