platform/kernel/linux-rpi.git
11 years agoMerge branch 'for-3.9' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Fri, 1 Mar 2013 02:02:55 +0000 (18:02 -0800)]
Merge branch 'for-3.9' of git://linux-nfs.org/~bfields/linux

Pull nfsd changes from J Bruce Fields:
 "Miscellaneous bugfixes, plus:

   - An overhaul of the DRC cache by Jeff Layton.  The main effect is
     just to make it larger.  This decreases the chances of intermittent
     errors especially in the UDP case.  But we'll need to watch for any
     reports of performance regressions.

   - Containerized nfsd: with some limitations, we now support
     per-container nfs-service, thanks to extensive work from Stanislav
     Kinsbursky over the last year."

Some notes about conflicts, since there were *two* non-data semantic
conflicts here:

 - idr_remove_all() had been added by a memory leak fix, but has since
   become deprecated since idr_destroy() does it for us now.

 - xs_local_connect() had been added by this branch to make AF_LOCAL
   connections be synchronous, but in the meantime Trond had changed the
   calling convention in order to avoid a RCU dereference.

There were a couple of more obvious actual source-level conflicts due to
the hlist traversal changes and one just due to code changes next to
each other, but those were trivial.

* 'for-3.9' of git://linux-nfs.org/~bfields/linux: (49 commits)
  SUNRPC: make AF_LOCAL connect synchronous
  nfsd: fix compiler warning about ambiguous types in nfsd_cache_csum
  svcrpc: fix rpc server shutdown races
  svcrpc: make svc_age_temp_xprts enqueue under sv_lock
  lockd: nlmclnt_reclaim(): avoid stack overflow
  nfsd: enable NFSv4 state in containers
  nfsd: disable usermode helper client tracker in container
  nfsd: use proper net while reading "exports" file
  nfsd: containerize NFSd filesystem
  nfsd: fix comments on nfsd_cache_lookup
  SUNRPC: move cache_detail->cache_request callback call to cache_read()
  SUNRPC: remove "cache_request" argument in sunrpc_cache_pipe_upcall() function
  SUNRPC: rework cache upcall logic
  SUNRPC: introduce cache_detail->cache_request callback
  NFS: simplify and clean cache library
  NFS: use SUNRPC cache creation and destruction helper for DNS cache
  nfsd4: free_stid can be static
  nfsd: keep a checksum of the first 256 bytes of request
  sunrpc: trim off trailing checksum before returning decrypted or integrity authenticated buffer
  sunrpc: fix comment in struct xdr_buf definition
  ...

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Fri, 1 Mar 2013 01:43:09 +0000 (17:43 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

Pull Ceph updates from Sage Weil:
 "A few groups of patches here.  Alex has been hard at work improving
  the RBD code, layout groundwork for understanding the new formats and
  doing layering.  Most of the infrastructure is now in place for the
  final bits that will come with the next window.

  There are a few changes to the data layout.  Jim Schutt's patch fixes
  some non-ideal CRUSH behavior, and a set of patches from me updates
  the client to speak a newer version of the protocol and implement an
  improved hashing strategy across storage nodes (when the server side
  supports it too).

  A pair of patches from Sam Lang fix the atomicity of open+create
  operations.  Several patches from Yan, Zheng fix various mds/client
  issues that turned up during multi-mds torture tests.

  A final set of patches expose file layouts via virtual xattrs, and
  allow the policies to be set on directories via xattrs as well
  (avoiding the awkward ioctl interface and providing a consistent
  interface for both kernel mount and ceph-fuse users)."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (143 commits)
  libceph: add support for HASHPSPOOL pool flag
  libceph: update osd request/reply encoding
  libceph: calculate placement based on the internal data types
  ceph: update support for PGID64, PGPOOL3, OSDENC protocol features
  ceph: update "ceph_features.h"
  libceph: decode into cpu-native ceph_pg type
  libceph: rename ceph_pg -> ceph_pg_v1
  rbd: pass length, not op for osd completions
  rbd: move rbd_osd_trivial_callback()
  libceph: use a do..while loop in con_work()
  libceph: use a flag to indicate a fault has occurred
  libceph: separate non-locked fault handling
  libceph: encapsulate connection backoff
  libceph: eliminate sparse warnings
  ceph: eliminate sparse warnings in fs code
  rbd: eliminate sparse warnings
  libceph: define connection flag helpers
  rbd: normalize dout() calls
  rbd: barriers are hard
  rbd: ignore zero-length requests
  ...

11 years agoMerge tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg...
Linus Torvalds [Thu, 28 Feb 2013 21:21:44 +0000 (13:21 -0800)]
Merge tag 'writeback-fixes' of git://git./linux/kernel/git/wfg/linux

Pull writeback fixes from Wu Fengguang:
 "Two writeback fixes

   - fix negative (setpoint - dirty) in 32bit archs

   - use down_read_trylock() in writeback_inodes_sb(_nr)_if_idle()"

* tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  Negative (setpoint-dirty) in bdi_position_ratio()
  vfs: re-implement writeback_inodes_sb(_nr)_if_idle() and rename them

11 years agoMerge branch 'for-3.9/drivers' of git://git.kernel.dk/linux-block
Linus Torvalds [Thu, 28 Feb 2013 21:16:07 +0000 (13:16 -0800)]
Merge branch 'for-3.9/drivers' of git://git.kernel.dk/linux-block

Pull block driver bits from Jens Axboe:
 "After the block IO core bits are in, please grab the driver updates
  from below as well.  It contains:

   - Fix ancient regression in dac960.  Nobody must be using that
     anymore...

   - Some good fixes from Guo Ghao for loop, fixing both potential
     oopses and deadlocks.

   - Improve mtip32xx for NUMA systems, by being a bit more clever in
     distributing work.

   - Add IBM RamSan 70/80 driver.  A second round of fixes for that is
     pending, that will come in through for-linus during the 3.9 cycle
     as per usual.

   - A few xen-blk{back,front} fixes from Konrad and Roger.

   - Other minor fixes and improvements."

* 'for-3.9/drivers' of git://git.kernel.dk/linux-block:
  loopdev: ignore negative offset when calculate loop device size
  loopdev: remove an user triggerable oops
  loopdev: move common code into loop_figure_size()
  loopdev: update block device size in loop_set_status()
  loopdev: fix a deadlock
  xen-blkback: use balloon pages for persistent grants
  xen-blkfront: drop the use of llist_for_each_entry_safe
  xen/blkback: Don't trust the handle from the frontend.
  xen-blkback: do not leak mode property
  block: IBM RamSan 70/80 driver fixes
  rsxx: add slab.h include to dma.c
  drivers/block/mtip32xx: add missing GENERIC_HARDIRQS dependency
  block: remove new __devinit/exit annotations on ramsam driver
  block: IBM RamSan 70/80 device driver
  drivers/block/mtip32xx/mtip32xx.c:1726:5: sparse: symbol 'mtip_send_trim' was not declared. Should it be static?
  drivers/block/mtip32xx/mtip32xx.c:4029:1: sparse: symbol 'mtip_workq_sdbf0' was not declared. Should it be static?
  dac960: return success instead of -ENOTTY
  mtip32xx: add trim support
  mtip32xx: Add workqueue and NUMA support
  block: delete super ancient PC-XT driver for 1980's hardware

11 years agoMerge branch 'for-3.9/core' of git://git.kernel.dk/linux-block
Linus Torvalds [Thu, 28 Feb 2013 20:52:24 +0000 (12:52 -0800)]
Merge branch 'for-3.9/core' of git://git.kernel.dk/linux-block

Pull block IO core bits from Jens Axboe:
 "Below are the core block IO bits for 3.9.  It was delayed a few days
  since my workstation kept crashing every 2-8h after pulling it into
  current -git, but turns out it is a bug in the new pstate code (divide
  by zero, will report separately).  In any case, it contains:

   - The big cfq/blkcg update from Tejun and and Vivek.

   - Additional block and writeback tracepoints from Tejun.

   - Improvement of the should sort (based on queues) logic in the plug
     flushing.

   - _io() variants of the wait_for_completion() interface, using
     io_schedule() instead of schedule() to contribute to io wait
     properly.

   - Various little fixes.

  You'll get two trivial merge conflicts, which should be easy enough to
  fix up"

Fix up the trivial conflicts due to hlist traversal cleanups (commit
b67bfe0d42ca: "hlist: drop the node parameter from iterators").

* 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits)
  block: remove redundant check to bd_openers()
  block: use i_size_write() in bd_set_size()
  cfq: fix lock imbalance with failed allocations
  drivers/block/swim3.c: fix null pointer dereference
  block: don't select PERCPU_RWSEM
  block: account iowait time when waiting for completion of IO request
  sched: add wait_for_completion_io[_timeout]
  writeback: add more tracepoints
  block: add block_{touch|dirty}_buffer tracepoint
  buffer: make touch_buffer() an exported function
  block: add @req to bio_{front|back}_merge tracepoints
  block: add missing block_bio_complete() tracepoint
  block: Remove should_sort judgement when flush blk_plug
  block,elevator: use new hashtable implementation
  cfq-iosched: add hierarchical cfq_group statistics
  cfq-iosched: collect stats from dead cfqgs
  cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
  blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock
  block: RCU free request_queue
  blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge()
  ...

11 years agoMerge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Thu, 28 Feb 2013 20:43:43 +0000 (12:43 -0800)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "The patch set is mostly driver updates (bnx2fc, ipr, lpfc, qla4) and a
  few bug fixes"

Pull delayed because google hates James, and sneakily considers his pull
requests spam. Why, google, why?

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (60 commits)
  [SCSI] aacraid: 1024 max outstanding command support for Series 7 and above
  [SCSI] bnx2fc: adjust duplicate test
  [SCSI] qla4xxx: Update driver version to 5.03.00-k4
  [SCSI] qla4xxx: Fix return code for qla4xxx_session_get_param.
  [SCSI] qla4xxx: wait for boot target login response during probe.
  [SCSI] qla4xxx: Added support for force firmware dump
  [SCSI] qla4xxx: Re-register IRQ handler while retrying initialize of adapter
  [SCSI] qla4xxx: Throttle active IOCBs to firmware limits
  [SCSI] qla4xxx: Remove unnecessary code from qla4xxx_init_local_data
  [SCSI] qla4xxx: Quiesce driver activities while loopback
  [SCSI] qla4xxx: Rename MBOX_ASTS_IDC_NOTIFY to MBOX_ASTS_IDC_REQUEST_NOTIFICATION
  [SCSI] qla4xxx: Add spurious interrupt messages under debug level 2
  [SCSI] cxgb4i: Remove the scsi host device when removing device
  [SCSI] bfa: fix strncpy() limiter in bfad_start_ops()
  [SCSI] qla4xxx: Update driver version to 5.03.00-k3
  [SCSI] qla4xxx: Correct the validation to check in get_sys_info mailbox
  [SCSI] qla4xxx: Pass correct function param to qla4_8xxx_rd_direct
  [SCSI] lpfc 8.3.37: Update lpfc version for 8.3.37 driver release
  [SCSI] lpfc 8.3.37: Fixed infinite loop in lpfc_sli4_fcf_rr_next_index_get.
  [SCSI] lpfc 8.3.37: Fixed crash due to SLI Port invalid resource count
  ...

11 years agoSUNRPC: make AF_LOCAL connect synchronous
J. Bruce Fields [Wed, 20 Feb 2013 22:52:19 +0000 (17:52 -0500)]
SUNRPC: make AF_LOCAL connect synchronous

It doesn't appear that anyone actually needs to connect asynchronously.

Also, using a workqueue for the connect means we lose the namespace
information from the original process.  This is a problem since there's
no way to explicitly pass in a filesystem namespace for resolution of an
AF_LOCAL address.

Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
11 years agoMerge branch 'akpm' (final batch from Andrew)
Linus Torvalds [Thu, 28 Feb 2013 04:58:09 +0000 (20:58 -0800)]
Merge branch 'akpm' (final batch from Andrew)

Merge third patch-bumb from Andrew Morton:
 "This wraps me up for -rc1.
   - Lots of misc stuff and things which were deferred/missed from
     patchbombings 1 & 2.
   - ocfs2 things
   - lib/scatterlist
   - hfsplus
   - fatfs
   - documentation
   - signals
   - procfs
   - lockdep
   - coredump
   - seqfile core
   - kexec
   - Tejun's large IDR tree reworkings
   - ipmi
   - partitions
   - nbd
   - random() things
   - kfifo
   - tools/testing/selftests updates
   - Sasha's large and pointless hlist cleanup"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (163 commits)
  hlist: drop the node parameter from iterators
  kcmp: make it depend on CHECKPOINT_RESTORE
  selftests: add a simple doc
  tools/testing/selftests/Makefile: rearrange targets
  selftests/efivarfs: add create-read test
  selftests/efivarfs: add empty file creation test
  selftests: add tests for efivarfs
  kfifo: fix kfifo_alloc() and kfifo_init()
  kfifo: move kfifo.c from kernel/ to lib/
  arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS
  w1: add support for DS2413 Dual Channel Addressable Switch
  memstick: move the dereference below the NULL test
  drivers/pps/clients/pps-gpio.c: use devm_kzalloc
  Documentation/DMA-API-HOWTO.txt: fix typo
  include/linux/eventfd.h: fix incorrect filename is a comment
  mtd: mtd_stresstest: use prandom_bytes()
  mtd: mtd_subpagetest: convert to use prandom library
  mtd: mtd_speedtest: use prandom_bytes
  mtd: mtd_pagetest: convert to use prandom library
  mtd: mtd_oobtest: convert to use prandom library
  ...

11 years agohlist: drop the node parameter from iterators
Sasha Levin [Thu, 28 Feb 2013 01:06:00 +0000 (17:06 -0800)]
hlist: drop the node parameter from iterators

I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokcmp: make it depend on CHECKPOINT_RESTORE
Cyrill Gorcunov [Thu, 28 Feb 2013 01:05:58 +0000 (17:05 -0800)]
kcmp: make it depend on CHECKPOINT_RESTORE

Since kcmp syscall has been implemented (initially on x86 architecture) a
number of other archs wire it up as well: xtensa, sparc, sh, s390, mips,
microblaze, m68k (not taking into account those who uses
<asm-generic/unistd.h> for syscall numbers definitions).

But the Makefile, which turns kcmp.o generation on still depends on former
config-x86.  Thus get rid of this limitation and make kcmp.o depend on
CHECKPOINT_RESTORE option.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoselftests: add a simple doc
Jeremy Kerr [Thu, 28 Feb 2013 01:05:57 +0000 (17:05 -0800)]
selftests: add a simple doc

This change adds a little documentation to the tests under
tools/testing/selftests/, based on akpm's explanation.

[akpm@linux-foundation.org: move from Documentation to tools/testing/selftests/README.txt]
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agotools/testing/selftests/Makefile: rearrange targets
Andrew Morton [Thu, 28 Feb 2013 01:05:56 +0000 (17:05 -0800)]
tools/testing/selftests/Makefile: rearrange targets

Do it one-per-line to reduce patch conflict pain.

Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoselftests/efivarfs: add create-read test
Jeremy Kerr [Thu, 28 Feb 2013 01:05:55 +0000 (17:05 -0800)]
selftests/efivarfs: add create-read test

Test that reads from a newly-created efivarfs file (with no data written)
will return EOF.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Lingzhu Xiang <lxiang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoselftests/efivarfs: add empty file creation test
Jeremy Kerr [Thu, 28 Feb 2013 01:05:53 +0000 (17:05 -0800)]
selftests/efivarfs: add empty file creation test

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Lingzhu Xiang <lxiang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoselftests: add tests for efivarfs
Jeremy Kerr [Thu, 28 Feb 2013 01:05:52 +0000 (17:05 -0800)]
selftests: add tests for efivarfs

This change adds a few initial efivarfs tests to the
tools/testing/selftests directory.

The open-unlink test is based on code from Lingzhu Xiang.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Lingzhu Xiang <lxiang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokfifo: fix kfifo_alloc() and kfifo_init()
Stefani Seibold [Thu, 28 Feb 2013 01:05:51 +0000 (17:05 -0800)]
kfifo: fix kfifo_alloc() and kfifo_init()

Fix kfifo_alloc() and kfifo_init() to alloc at least the requested number
of elements.  Since the kfifo operates on power of 2 the request size will
be rounded up to the next power of two.

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokfifo: move kfifo.c from kernel/ to lib/
Stefani Seibold [Thu, 28 Feb 2013 01:05:50 +0000 (17:05 -0800)]
kfifo: move kfifo.c from kernel/ to lib/

Move kfifo.c from kernel/ to lib/

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoarch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS
Stephen Rothwell [Thu, 28 Feb 2013 01:05:48 +0000 (17:05 -0800)]
arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS

Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures
that already provide virt_to_bus().

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: H Hartley Sweeten <hartleys@visionengravers.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agow1: add support for DS2413 Dual Channel Addressable Switch
Mariusz Bialonczyk [Thu, 28 Feb 2013 01:05:47 +0000 (17:05 -0800)]
w1: add support for DS2413 Dual Channel Addressable Switch

Also fixes some whitespace inconsistency in Kconfig and w1_family.h when
DS2408 chip support was added.

Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomemstick: move the dereference below the NULL test
Wei Yongjun [Thu, 28 Feb 2013 01:05:46 +0000 (17:05 -0800)]
memstick: move the dereference below the NULL test

The dereference should be moved below the NULL test.

spatch with a semantic match is used to found this.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/pps/clients/pps-gpio.c: use devm_kzalloc
Julia Lawall [Thu, 28 Feb 2013 01:05:44 +0000 (17:05 -0800)]
drivers/pps/clients/pps-gpio.c: use devm_kzalloc

devm_kzalloc allocates memory that is released when a driver detaches.
This patch uses devm_kzalloc for data that is allocated in the probe
function of a platform device and is only freed in the remove function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoDocumentation/DMA-API-HOWTO.txt: fix typo
Andrew Morton [Thu, 28 Feb 2013 01:05:43 +0000 (17:05 -0800)]
Documentation/DMA-API-HOWTO.txt: fix typo

Noted by Jesper

Cc: Jesper Juhl <jj@chaosbits.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Shuah Khan <shuah.khan@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoinclude/linux/eventfd.h: fix incorrect filename is a comment
Martin Sustrik [Thu, 28 Feb 2013 01:05:42 +0000 (17:05 -0800)]
include/linux/eventfd.h: fix incorrect filename is a comment

Comment in eventfd.h referred to 'include/asm-generic/fcntl.h'
while the correct path is 'include/uapi/asm-generic/fcntl.h'.

Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomtd: mtd_stresstest: use prandom_bytes()
Akinobu Mita [Thu, 28 Feb 2013 01:05:40 +0000 (17:05 -0800)]
mtd: mtd_stresstest: use prandom_bytes()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomtd: mtd_subpagetest: convert to use prandom library
Akinobu Mita [Thu, 28 Feb 2013 01:05:39 +0000 (17:05 -0800)]
mtd: mtd_subpagetest: convert to use prandom library

This removes home-brewed pseudo-random number generator and use
prandom library.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomtd: mtd_speedtest: use prandom_bytes
Akinobu Mita [Thu, 28 Feb 2013 01:05:37 +0000 (17:05 -0800)]
mtd: mtd_speedtest: use prandom_bytes

Use prandom_bytes instead of equivalent local function.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomtd: mtd_pagetest: convert to use prandom library
Akinobu Mita [Thu, 28 Feb 2013 01:05:35 +0000 (17:05 -0800)]
mtd: mtd_pagetest: convert to use prandom library

This removes home-brewed pseudo-random number generator and use
prandom library.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomtd: mtd_oobtest: convert to use prandom library
Akinobu Mita [Thu, 28 Feb 2013 01:05:33 +0000 (17:05 -0800)]
mtd: mtd_oobtest: convert to use prandom library

This removes home-brewed pseudo-random number generator and use
prandom library.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomtd: mtd_nandecctest: use prandom_bytes instead of get_random_bytes()
Akinobu Mita [Thu, 28 Feb 2013 01:05:31 +0000 (17:05 -0800)]
mtd: mtd_nandecctest: use prandom_bytes instead of get_random_bytes()

Using prandom_bytes() is enough.  Because this data is only used
for testing, not used for cryptographic use.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokernel/utsname.c: fix wrong comment about clone_uts_ns()
Yuanhan Liu [Thu, 28 Feb 2013 01:05:30 +0000 (17:05 -0800)]
kernel/utsname.c: fix wrong comment about clone_uts_ns()

Fix the wrong comment about the return value of clone_uts_ns()

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonbd: fix sparse warning
Alex Elder [Thu, 28 Feb 2013 01:05:28 +0000 (17:05 -0800)]
nbd: fix sparse warning

I just fixed this in "drivers/block/rbd.c" and I noticed that
"drivers/block/nbd.c" has the same problem.  Fix a warning issued by
sparse by adding some lockdep annotations to indicate the queue lock gets
dropped (because it's held when do_nbd_request() is called) and
re-acquired within the function.

Signed-off-by: Alex Elder <elder@inktank.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Paul Clements <paul.clements@us.sios.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonbd: update documentation and link to mailinglist
Wouter Verhelst [Thu, 28 Feb 2013 01:05:27 +0000 (17:05 -0800)]
nbd: update documentation and link to mailinglist

Documentation/blockdev/nbd.txt contained some documentation which was
horribly outdated and probably still dates from the original patch that
added NBD support to the kernel.

This patch removes the useless and outdated bits.  The tools on nbd.sf.net
are fully documented in manpages, which is where documentation for the
non-kernel bits should live.

Additionally, add a reference to the MAINTAINERS file for the nbd-general
mailinglist that is used for discussion of the userland tools and the
kernel module already.

Signed-off-by: Wouter Verhelst <w@uter.be>
Cc: Paul Clements <Paul.Clements@steeleye.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonbd: show read-only state in sysfs
Paolo Bonzini [Thu, 28 Feb 2013 01:05:26 +0000 (17:05 -0800)]
nbd: show read-only state in sysfs

Pass the read-only flag to set_device_ro, so that it will be visible to
the block layer and in sysfs.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Clements <Paul.Clements@steeleye.com>
Cc: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonbd: fsync and kill block device on shutdown
Paolo Bonzini [Thu, 28 Feb 2013 01:05:25 +0000 (17:05 -0800)]
nbd: fsync and kill block device on shutdown

There are two problems with shutdown in the NBD driver.

1: Receiving the NBD_DISCONNECT ioctl does not sync the filesystem.

   This patch adds the sync operation into __nbd_ioctl()'s
   NBD_DISCONNECT handler.  This is useful because BLKFLSBUF is restricted
   to processes that have CAP_SYS_ADMIN, and the NBD client may not
   possess it (fsync of the block device does not sync the filesystem,
   either).

2: Once we clear the socket we have no guarantee that later reads will
   come from the same backing storage.

   The patch adds calls to kill_bdev() in __nbd_ioctl()'s socket
   clearing code so the page cache is cleaned, lest reads that hit on the
   page cache will return stale data from the previously-accessible disk.

Example:

    # qemu-nbd -r -c/dev/nbd0 /dev/sr0
    # file -s /dev/nbd0
    /dev/stdin: # UDF filesystem data (version 1.5) etc.
    # qemu-nbd -d /dev/nbd0
    # qemu-nbd -r -c/dev/nbd0 /dev/sda
    # file -s /dev/nbd0
    /dev/stdin: # UDF filesystem data (version 1.5) etc.

While /dev/sda has:

    # file -s /dev/sda
    /dev/sda: x86 boot sector; etc.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paul Clements <Paul.Clements@steeleye.com>
Cc: Alex Bligh <alex@alex.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonbd: support FLUSH requests
Alex Bligh [Thu, 28 Feb 2013 01:05:23 +0000 (17:05 -0800)]
nbd: support FLUSH requests

Currently, the NBD device does not accept flush requests from the Linux
block layer.  If the NBD server opened the target with neither O_SYNC nor
O_DSYNC, however, the device will be effectively backed by a writeback
cache.  Without issuing flushes properly, operation of the NBD device will
not be safe against power losses.

The NBD protocol has support for both a cache flush command and a FUA
command flag; the server will also pass a flag to note its support for
these features.  This patch adds support for the cache flush command and
flag.  In the kernel, we receive the flags via the NBD_SET_FLAGS ioctl,
and map NBD_FLAG_SEND_FLUSH to the argument of blk_queue_flush.  When the
flag is active the block layer will send REQ_FLUSH requests, which we
translate to NBD_CMD_FLUSH commands.

FUA support is not included in this patch because all free software
servers implement it with a full fdatasync; thus it has no advantage over
supporting flush only.  Because I [Paolo] cannot really benchmark it in a
realistic scenario, I cannot tell if it is a good idea or not.  It is also
not clear if it is valid for an NBD server to support FUA but not flush.
The Linux block layer gives a warning for this combination, the NBD
protocol documentation says nothing about it.

The patch also fixes a small problem in the handling of flags: nbd->flags
must be cleared at the end of NBD_DO_IT, but the driver was not doing
that.  The bug manifests itself as follows.  Suppose you two different
client/server pairs to start the NBD device.  Suppose also that the first
client supports NBD_SET_FLAGS, and the first server sends
NBD_FLAG_SEND_FLUSH; the second pair instead does neither of these two
things.  Before this patch, the second invocation of NBD_DO_IT will use a
stale value of nbd->flags, and the second server will issue an error every
time it receives an NBD_CMD_FLUSH command.

This bug is pre-existing, but it becomes much more important after this
patch; flush failures make the device pretty much unusable, unlike

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Acked-by: Paul Clements <Paul.Clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokernel/utsname_sysctl.c: put get/get_uts() into CONFIG_PROC_SYSCTL code block
Yuanhan Liu [Thu, 28 Feb 2013 01:05:22 +0000 (17:05 -0800)]
kernel/utsname_sysctl.c: put get/get_uts() into CONFIG_PROC_SYSCTL code block

Put get/get_uts() into CONFIG_PROC_SYSCTL code block as they are used
only when CONFIG_PROC_SYSCTL is enabled.

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agosysctl: fix null checking in bin_dn_node_address()
Xi Wang [Thu, 28 Feb 2013 01:05:21 +0000 (17:05 -0800)]
sysctl: fix null checking in bin_dn_node_address()

The null check of `strchr() + 1' is broken, which is always non-null,
leading to OOB read.  Instead, check the result of strchr().

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoblock/partitions: optimize memory allocation in check_partition()
Ming Lei [Thu, 28 Feb 2013 01:05:19 +0000 (17:05 -0800)]
block/partitions: optimize memory allocation in check_partition()

Currently, sizeof(struct parsed_partitions) may be 64KB in 32bit arch, so
it is easy to trigger page allocation failure by check_partition,
especially in hotplug block device situation(such as, USB mass storage,
MMC card, ...), and Felipe Balbi has observed the failure.

This patch does below optimizations on the allocation of struct
parsed_partitions to try to address the issue:

- make parsed_partitions.parts as pointer so that the pointed memory can
  fit in 32KB buffer, then approximate 32KB memory can be saved

- vmalloc the buffer pointed by parsed_partitions.parts because 32KB is
  still a bit big for kmalloc

- given that many devices have the partition count limit, so only
  allocate disk_max_parts() partitions instead of 256 partitions always

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reported-by: Felipe Balbi <balbi@ti.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoblock/partitions/mac.c: obey the state->limit constraint
Ming Lei [Thu, 28 Feb 2013 01:05:18 +0000 (17:05 -0800)]
block/partitions/mac.c: obey the state->limit constraint

It isn't necessary to read the information of partitions whose number is
equal and more than state->limit since only maximum state->limit
partitions will be added inside rescan_partitions().

That is also what other kind of partitions are doing.

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoblock/partitions/efi.c: ensure that the GPT header is at least the size of the structure.
Peter Jones [Thu, 28 Feb 2013 01:05:17 +0000 (17:05 -0800)]
block/partitions/efi.c: ensure that the GPT header is at least the size of the structure.

UEFI 2.3.1D will include a change to the spec language mandating that a
GPT header must be greater than *or equal to* the size of the defined
structure.  While verifying that this would work on Linux, I discovered
that we're not actually checking the minimum bound at all.

The result of this is that when we verify the checksum, it's possible that
on a malformed header (with header_size of 0), we won't actually verify
any data.

[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: Peter Jones <pjones@redhat.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoblock/partition/msdos: detect AIX formatted disks even without 55aa
Philippe De Muyter [Thu, 28 Feb 2013 01:05:16 +0000 (17:05 -0800)]
block/partition/msdos: detect AIX formatted disks even without 55aa

AIX formatted disks do not always have the MSDOS 55aa signature.
This happens e.g. for unbootable AIX disks.

Up to now, such disks were not recognized as AIX disks, because of the
missing 55aa.  Fix that by inverting the two tests.  Let's first
check for the AIX magic strings, and only if that fails check for
the MSDOS magic word.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Cc: Andreas Mohr <andi@lisas.de>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/char/misc.c:misc_register(): do not loop on misc_list unconditionally
Dae S. Kim [Thu, 28 Feb 2013 01:05:14 +0000 (17:05 -0800)]
drivers/char/misc.c:misc_register(): do not loop on misc_list unconditionally

If the minor number is assigned dynamically, there is no need to search
for misc->minor in misc_list, since misc->minor == MISC_DYNAMIC_MINOR.

[akpm@linux-foundation.org: reduce scope of local `c']
Signed-off-by: Dae S. Kim <dae@velatum.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipmi: add options to disable openfirmware and PCI scanning
Corey Minyard [Thu, 28 Feb 2013 01:05:13 +0000 (17:05 -0800)]
ipmi: add options to disable openfirmware and PCI scanning

Add try...  parameters to disable pci and platform (openfirmware) device
scanning for IPMI.  Also add docs for all the try...  parameters.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipmi: add new kernel options to prevent automatic ipmi init
Corey Minyard [Thu, 28 Feb 2013 01:05:12 +0000 (17:05 -0800)]
ipmi: add new kernel options to prevent automatic ipmi init

The configuration change building ipmi_si into the kernel precludes the
use of a custom driver that can utilize more than one KCS interface,
multiple IPMBs, and more than one BMC.  This capability is important for
fault-tolerant systems.

Even if the kernel option ipmi_si.trydefaults=0 is specified, ipmi_si
discovers and claims one of the KCS interfaces on a Stratus server.  The
inability to now prevent the kernel from managing this device is a
regression from previous kernels.  The regression breaks a capability
fault-tolerant vendors have relied upon.

To support both ACPI opregion access and the need to avoid activation of
ipmi_si on some platforms, we've added two new kernel options,
ipmi_si.tryacpi and ipmi_si.trydmi be added to prevent ipmi_si from
initializing when these options are set to 0 on the kernel command line.
With these options at the default value of 1, ipmi_si init proceeds
according to the kernel default.

Tested-by: Jim Paradis <jparadis@redhat.com>
Signed-off-by: Robert Evans <Robert.Evans@stratus.com>
Signed-off-by: Jim Paradis <jparadis@redhat.com>
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipmi: remove superfluous kernel/userspace explanation
Robert P. J. Day [Thu, 28 Feb 2013 01:05:11 +0000 (17:05 -0800)]
ipmi: remove superfluous kernel/userspace explanation

Given the obvious distinction between kernel and userspace supported
by uapi/, it seems unnecessary to comment on that.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoidr: explain WARN_ON_ONCE() on negative IDs out-of-range ID
Tejun Heo [Thu, 28 Feb 2013 01:05:10 +0000 (17:05 -0800)]
idr: explain WARN_ON_ONCE() on negative IDs out-of-range ID

Until recently, when an negative ID is specified, idr functions used to
ignore the sign bit and proceeded with the operation with the rest of
bits, which is bizarre and error-prone.  The behavior recently got changed
so that negative IDs are treated as invalid but we're triggering
WARN_ON_ONCE() on negative IDs just in case somebody was depending on the
sign bit being ignored, so that those can be detected and fixed easily.

We only need this for a while.  Explain why WARN_ON_ONCE()s are there and
that they can be removed later.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoidr: implement lookup hint
Tejun Heo [Thu, 28 Feb 2013 01:05:08 +0000 (17:05 -0800)]
idr: implement lookup hint

While idr lookup isn't a particularly heavy operation, it still is too
substantial to use in hot paths without worrying about the performance
implications.  With recent changes, each idr_layer covers 256 slots
which should be enough to cover most use cases with single idr_layer
making lookup hint very attractive.

This patch adds idr->hint which points to the idr_layer which
allocated an ID most recently and the fast path lookup becomes

if (look up target's prefix matches that of the hinted layer)
return hint->ary[ID's offset in the leaf layer];

which can be inlined.

idr->hint is set to the leaf node on idr_fill_slot() and cleared from
free_layer().

[andriy.shevchenko@linux.intel.com: always do slow path when hint is uninitialized]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoidr: add idr_layer->prefix
Tejun Heo [Thu, 28 Feb 2013 01:05:07 +0000 (17:05 -0800)]
idr: add idr_layer->prefix

Add a field which carries the prefix of ID the idr_layer covers.  This
will be used to implement lookup hint.

This patch doesn't make use of the new field and doesn't introduce any
behavior difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoidr: make idr_layer larger
Tejun Heo [Thu, 28 Feb 2013 01:05:06 +0000 (17:05 -0800)]
idr: make idr_layer larger

With recent preloading changes, idr no longer keeps full layer cache per
each idr instance (used to be ~6.5k per idr on 64bit) and the previous
patch removed restriction on the bitmap size.  Both now allow us to have
larger layers.

Increase IDR_BITS to 8 regardless of BITS_PER_LONG.  Each layer is
slightly larger than 2k on 64bit and 1k on 32bit and carries 256 entries.
The size isn't too large, especially compared to what we used to waste on
per-idr caches, and 256 entries should be able to serve most use cases
with single layer.  The max tree depth is 4 which is much better than the
previous 6 on 64bit and 7 on 32bit.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoidr: remove length restriction from idr_layer->bitmap
Tejun Heo [Thu, 28 Feb 2013 01:05:05 +0000 (17:05 -0800)]
idr: remove length restriction from idr_layer->bitmap

Currently, idr->bitmap is declared as an unsigned long which restricts
the number of bits an idr_layer can contain.  All bitops can handle
arbitrary positive integer bit number and there's no reason for this
restriction.

Declare idr_layer->bitmap using DECLARE_BITMAP() instead of a single
unsigned long.

* idr_layer->bitmap is now an array.  '&' dropped from params to
  bitops.

* Replaced "== IDR_FULL" tests with bitmap_full() and removed
  IDR_FULL.

* Replaced find_next_bit() on ~bitmap with find_next_zero_bit().

* Replaced "bitmap = 0" with bitmap_clear().

This patch doesn't (or at least shouldn't) introduce any behavior
changes.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoidr: remove MAX_IDR_MASK and move left MAX_IDR_* into idr.c
Tejun Heo [Thu, 28 Feb 2013 01:05:04 +0000 (17:05 -0800)]
idr: remove MAX_IDR_MASK and move left MAX_IDR_* into idr.c

MAX_IDR_MASK is another weirdness in the idr interface.  As idr covers
whole positive integer range, it's defined as 0x7fffffff or INT_MAX.

Its usage in idr_find(), idr_replace() and idr_remove() is bizarre.
They basically mask off the sign bit and operate on the rest, so if
the caller, by accident, passes in a negative number, the sign bit
will be masked off and the remaining part will be used as if that was
the input, which is worse than crashing.

The constant is visible in idr.h and there are several users in the
kernel.

* drivers/i2c/i2c-core.c:i2c_add_numbered_adapter()

  Basically used to test if adap->nr is a negative number which isn't
  -1 and returns -EINVAL if so.  idr_alloc() already has negative
  @start checking (w/ WARN_ON_ONCE), so this can go away.

* drivers/infiniband/core/cm.c:cm_alloc_id()
  drivers/infiniband/hw/mlx4/cm.c:id_map_alloc()

  Used to wrap cyclic @start.  Can be replaced with max(next, 0).
  Note that this type of cyclic allocation using idr is buggy.  These
  are prone to spurious -ENOSPC failure after the first wraparound.

* fs/super.c:get_anon_bdev()

  The ID allocated from ida is masked off before being tested whether
  it's inside valid range.  ida allocated ID can never be a negative
  number and the masking is unnecessary.

Update idr_*() functions to fail with -EINVAL when negative @id is
specified and update other MAX_IDR_MASK users as described above.

This leaves MAX_IDR_MASK without any user, remove it and relocate
other MAX_IDR_* constants to lib/idr.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Roland Dreier <roland@kernel.org>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: "Marciniszyn, Mike" <mike.marciniszyn@intel.com>
Cc: Jack Morgenstein <jackm@dev.mellanox.co.il>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Wolfram Sang <wolfram@the-dreams.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoidr: fix top layer handling
Tejun Heo [Thu, 28 Feb 2013 01:05:02 +0000 (17:05 -0800)]
idr: fix top layer handling

Most functions in idr fail to deal with the high bits when the idr
tree grows to the maximum height.

* idr_get_empty_slot() stops growing idr tree once the depth reaches
  MAX_IDR_LEVEL - 1, which is one depth shallower than necessary to
  cover the whole range.  The function doesn't even notice that it
  didn't grow the tree enough and ends up allocating the wrong ID
  given sufficiently high @starting_id.

  For example, on 64 bit, if the starting id is 0x7fffff01,
  idr_get_empty_slot() will grow the tree 5 layer deep, which only
  covers the 30 bits and then proceed to allocate as if the bit 30
  wasn't specified.  It ends up allocating 0x3fffff01 without the bit
  30 but still returns 0x7fffff01.

* __idr_remove_all() will not remove anything if the tree is fully
  grown.

* idr_find() can't find anything if the tree is fully grown.

* idr_for_each() and idr_get_next() can't iterate anything if the tree
  is fully grown.

Fix it by introducing idr_max() which returns the maximum possible ID
given the depth of tree and replacing the id limit checks in all
affected places.

As the idr_layer pointer array pa[] needs to be 1 larger than the
maximum depth, enlarge pa[] arrays by one.

While this plugs the discovered issues, the whole code base is
horrible and in desparate need of rewrite.  It's fragile like hell,

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonfs4client: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:05:01 +0000 (17:05 -0800)]
nfs4client: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agosctp: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:05:00 +0000 (17:05 -0800)]
sctp: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomac80211: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:59 +0000 (17:04 -0800)]
mac80211: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonet/9p: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:57 +0000 (17:04 -0800)]
net/9p: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoposix-timers: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:56 +0000 (17:04 -0800)]
posix-timers: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoevents: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:55 +0000 (17:04 -0800)]
events: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocgroup: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:54 +0000 (17:04 -0800)]
cgroup: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:53 +0000 (17:04 -0800)]
ipc: convert to idr_alloc()

Convert to the much saner new idr interface.

The new interface doesn't directly translate to the way idr_pre_get()
was used around ipc_addid() as preloading disables preemption.  From
my cursory reading, it seems like we should be able to do all
allocation from ipc_addid(), so I moved it there.  Can you please
check whether this would be okay?  If this is wrong and ipc_addid()
should be allowed to be called from non-sleepable context, I'd suggest
allocating id itself in the outer functions and later install the
pointer using idr_replace().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoocfs2: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:51 +0000 (17:04 -0800)]
ocfs2: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoinotify: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:50 +0000 (17:04 -0800)]
inotify: convert to idr_alloc()

Convert to the much saner new idr interface.

Note that the adhoc cyclic id allocation is buggy.  If wraparound
happens, the previous code with idr_get_new_above() may segfault and
the converted code will trigger WARN and return -EINVAL.  Even if it's
fixed to wrap to zero, the code will be prone to unnecessary -ENOSPC
failures after the first wraparound.  We probably need to implement
proper cyclic support in idr.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodlm: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:49 +0000 (17:04 -0800)]
dlm: convert to idr_alloc()

Convert to the much saner new idr interface.  Error return values from
recover_idr_add() mix -1 and -errno.  The conversion doesn't change
that but it looks iffy.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agovfio: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:48 +0000 (17:04 -0800)]
vfio: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agouio: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:47 +0000 (17:04 -0800)]
uio: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Hans J. Koch" <hjk@hansjkoch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agothermal: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:46 +0000 (17:04 -0800)]
thermal: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoscsi/lpfc: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:44 +0000 (17:04 -0800)]
scsi/lpfc: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: James Smart <james.smart@emulex.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agotarget/iscsi: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:43 +0000 (17:04 -0800)]
target/iscsi: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoscsi: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:42 +0000 (17:04 -0800)]
scsi: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoscsi/bfa: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:41 +0000 (17:04 -0800)]
scsi/bfa: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Krishna C Gudipati <kgudipat@brocade.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agorpmsg: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:40 +0000 (17:04 -0800)]
rpmsg: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoremoteproc: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:39 +0000 (17:04 -0800)]
remoteproc: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopps: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:38 +0000 (17:04 -0800)]
pps: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopower: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:37 +0000 (17:04 -0800)]
power: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoppp: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:36 +0000 (17:04 -0800)]
ppp: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomacvtap: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:34 +0000 (17:04 -0800)]
macvtap: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomtd: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:33 +0000 (17:04 -0800)]
mtd: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agommc: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:32 +0000 (17:04 -0800)]
mmc: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomisc/tifm_core: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:31 +0000 (17:04 -0800)]
misc/tifm_core: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomisc/c2port: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:30 +0000 (17:04 -0800)]
misc/c2port: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomfd: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:29 +0000 (17:04 -0800)]
mfd: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomemstick: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:28 +0000 (17:04 -0800)]
memstick: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodm: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:26 +0000 (17:04 -0800)]
dm: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alasdair Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoIB/qib: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:25 +0000 (17:04 -0800)]
IB/qib: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mike Marciniszyn <infinipath@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoIB/ocrdma: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:24 +0000 (17:04 -0800)]
IB/ocrdma: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoIB/mlx4: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:23 +0000 (17:04 -0800)]
IB/mlx4: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jack Morgenstein <jackm@dev.mellanox.co.il>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoIB/ipath: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:22 +0000 (17:04 -0800)]
IB/ipath: convert to idr_alloc()

Convert to the much saner new idr interface.

[yongjun_wei@trendmicro.com.cn: use GFP_NOWAIT under spin lock]
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoIB/ehca: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:21 +0000 (17:04 -0800)]
IB/ehca: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Cc: Christoph Raisch <raisch@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoIB/cxgb4: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:20 +0000 (17:04 -0800)]
IB/cxgb4: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoIB/cxgb3: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:18 +0000 (17:04 -0800)]
IB/cxgb3: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoIB/amso1100: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:17 +0000 (17:04 -0800)]
IB/amso1100: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Cc: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoIB/core: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:16 +0000 (17:04 -0800)]
IB/core: convert to idr_alloc()

Convert to the much saner new idr interface.

v2: Mike triggered WARN_ON() in idr_preload() because send_mad(),
    which may be used from non-process context, was calling
    idr_preload() unconditionally.  Preload iff @gfp_mask has
    __GFP_WAIT.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reported-by: "Marciniszyn, Mike" <mike.marciniszyn@intel.com>
Cc: Roland Dreier <roland@kernel.org>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoi2c: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:15 +0000 (17:04 -0800)]
i2c: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Wolfram Sang <wolfram@the-dreams.de>
Tested-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrm/vmwgfx: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:14 +0000 (17:04 -0800)]
drm/vmwgfx: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrm/via: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:12 +0000 (17:04 -0800)]
drm/via: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrm/sis: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:11 +0000 (17:04 -0800)]
drm/sis: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrm/i915: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:10 +0000 (17:04 -0800)]
drm/i915: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrm/exynos: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:09 +0000 (17:04 -0800)]
drm/exynos: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Airlie <airlied@linux.ie>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrm: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:08 +0000 (17:04 -0800)]
drm: convert to idr_alloc()

Convert to the much saner new idr interface.

* drm_ctxbitmap_next() error handling in drm_addctx() seems broken.
  drm_ctxbitmap_next() return -errno on failure not -1.

[artem.savkov@gmail.com: missing idr_preload_end in drm_gem_flink_ioctl]
[jslaby@suse.cz: fix drm_gem_flink_ioctl() return value]
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Artem Savkov <artem.savkov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agogpio: convert to idr_alloc()
Tejun Heo [Thu, 28 Feb 2013 01:04:06 +0000 (17:04 -0800)]
gpio: convert to idr_alloc()

Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>