mtd: nand: make reads using MTD_OOB_RAW affect only ECC validation

This changes the behavier of MTD_OOB_RAW. It used to read both OOB and
data to the data buffer, however you would still need to specify the
dummy oob buffer.

This is only used in one place, but makes it hard to read data+oob
without ECC test, thus I removed that behavier, and fixed the user.

Now MTD_OOB_RAW behaves just like MTD_OOB_PLACE, but doesn't do ECC
validation

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: nand: cleanup the nand_do_write_ops

nand_do_write_ops was broken in regard to writing several pages, each
with its own oob.

Although nand_do_write_ops intends to allow such mode, it fails do do so
Probably this was never tested.

Also add missing checks for attempts to write at illegal offsets.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: nand: make MTD_OOB_PLACE work correctly.

MTD_OOB_PLACE is supposed to read/write the raw oob data similiar to the
MTD_OOB_RAW however due to a bug, currently it is not possible to read
more data that is specified by the oob 'free' regions.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: nand: make suspend work if device is accessed by kernel threads.

Since all userspace threads are frozen at the time the nand_suspend is called,
they aren't inside any nand function.

We don't call try_to_freeze in nand ether. Thus the only user that can
be inside the nand functions is an non freezeable kernel thread. Thus we
can safely wait for it to finish.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: blktrans: allow FTL drivers to export sysfs attributes

This patch adds an ability to export sysfs attributes below
the block disk device.

This can be used to pass the udev an information about the FTL
and could include the vendor, serial, version, etc...

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: call the remove notifiers before assuming it is in use

Now that mtd block common layer is prepared for proper hotplug support,
enable it here

Now all users of the mtd device have a chance to put the mtd device
when they are notified to do so, and they have to do so to make hotplug work.

[dwmw2: There's more work to be done to fix hotplug in the general case, but
        this is a reasonable start]

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: mtdblock: test return value of add_mtd_blktrans_dev, because if can fail

This prevents a memory leak

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: blktrans: Hotplug fixes

* Add locking where it was missing.

* Don't do a get_mtd_device in blktrans_open because it would lead to a
  deadlock; instead do that in add_mtd_blktrans_dev.

* Only free the mtd_blktrans_dev structure when the last user exits.

* Flush request queue on device removal.

* Track users, and call tr->release in del_mtd_blktrans_dev
  Due to that ->open and release aren't called more that once.

Now it is safe to call del_mtd_blktrans_dev while the device is still in use.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: blktrans: remove mtd_blkcore_priv, switch to per device queue and thread

This is the biggest change. To make hotplug possible, and this layer
clean, the mtd_blktrans_dev now contains everything for a single mtd
block translation device. Also removed some very old leftovers.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: create unlocked versions of {get,put}_mtd_device

Use these only if you know that you already hold mtd_table_mutex

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: nand: Add MPC5121 NAND Flash Controller driver

Adds NAND Flash Controller driver for MPC5121 Revision 2.
All device features, except hardware ECC and power management,
are supported.

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: nand_bcm: fix hot spin and code duplication

In the branch where pagesize equalled NAND_DATA_ACCESS_SIZE, NumToRead
wasn't decremented in the `while (numToRead > 11)' loop.
Also the first and last while loops were duplicated in both branches.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: omap2 fix prefetch mode read issue

There is a bug in nand prefetch read routine, which comes into effect
only if nand device is a 16-bit device (as we have in zoom boards).
This bug is effective only with below combination of conditions:
1. nand deivce, in use, is a 16 bit device
2. nand driver supports 'subpage' read
3. SW ECC is in use

This was not seen old  kernel (ex: .23), because when, in early days,
we tested this (nand prefetch read in LDP boards) there was no
'subpage read' support.
Later when we had subpage read in (.27) kernel, we had hw ecc enabled
always in our internal tree. So, we missed this bug.

This patch fixes the issue.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: omap2: correct 'info' pointer in 'omap_nand_remove'

Removing OMAP NAND driver, when loaded as a module, gives error and
does not get success. This fixes this and makes driver loadable and
removable run time.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: omap2: fixing compilation warning

Fixing below warning in compilation:
drivers/mtd/nand/omap2.c: In function 'omap_write_buf_dma_pref':
drivers/mtd/nand/omap2.c:508: warning: passing argument 2 of
'omap_nand_dma_transfer' discards qualifiers from pointer target type

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: move more manufacturers to the common cfi.h header file

Move MANUFACTURER_MACRONIX and MANUFACTURER_SST definitions to the
include/linux/mtd/cfi.h header file and rename them to CFI_MFR_MACRONIX and
CFI_MFR_SST.

All references in drivers/mtd/chips/cfi_cmdset_0002.c are updated to reflect
this.

Signed-off-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: mxc_nand: add RESET command support

mxc_nand driver must support the RESET Command in order to support
Micron NAND which need a reset before any other command.

Signed-off-by: Eric Benard <eric@eukrea.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: inftl: misplaced parenthesis in find_boot_record

The parenthesis was misplaced, upon error a one was shown.

[dwmw2: Fix the code not to do the assignment within the if() statement]
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: OneNAND: do not use DMA if oops in progress

Otherwise we may hang if we are called from panic() through mtdoops.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: nand: add lock/unlock routines

Add nand lock / unlock routines. At least 'micron' parts
support this.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: nand: create a helper verification function

... verification for 'nand_erase_nand'

These checks are expected to be used by 'nand_lock' and 'nand_unlock'
routines too. As all these three are block aligned operations.
So, creating a helper function for this makes sense.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

JFFS2: avoid using C++ keyword `new' in userspace-visible header

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14995

Reported-by: R. Diez <rdiezmail-kernelbugzilla@yahoo.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: maps: ceiva: do not return random numbers

When machine_is_ceiva() returns zero, 'clps_setup_flash()' returns a
value of an unitialized variable. Fix this.

Spotted by David Binderman.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtdchar: Register the full range of minor numbers

register_chrdev() registers minor numbers up to 255, but we can now
potentially have much larger numbers.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: Raise limit on block device minor numbers

add_mtd_blktrans_dev() imposes a maximum of 257 devices per block
translator.  This was presumably meant to prevent overflow back in the
days of 8-bit minor numbers.  Instead, check against MINORMASK and the
limits of the partition naming scheme.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: Replace static array of devices with an idr structure

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

idr: export idr_get_next()

idr_get_next() was accidentally not exported when added.  It is about
to be used by mtdcore, which may be built as a module.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: mtdblock: Dynamically allocate cache info structures

Since we allocate struct mtd_blktrans_dev for each block device, we
can add our own structure members to the end.  Therefore embed
struct mtd_blktrans_dev in struct mtdblk_dev and remove the static
array of struct mtdblk_dev.  Also remove the redundant pointer to
struct mtd_info.

This is preparation for removing the static limit on the number of MTD
devices.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: Remove unnecessary comparisons with MAX_MTD_DEVICES

MAX_MTD_DEVICES is about to be removed.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: nandsim: Define CONFIG_NANDSIM_MAX_PARTS and use it instead of MAX_MTD_DEVICES

MAX_MTD_DEVICES is about to be removed.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: Use get_mtd_device_nm() to find named device in get_sb_mtd()

This removes the need to know the number of MTD devices.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: Introduce and use iteration macro for reading the MTD device table

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: change positive error return into negative

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: maps: Blackfin async: rename local funcs to avoid common clashes

There are new Blackfin MMR helper functions that use the same name as some
of the local functions in this driver, so have the driver use more specific
names to avoid the issue.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: fix different address space noise

In mtd_ioctl MEMGETREGIONINFO the region_user_info pointer ur
is cast in __kernel space. This produces a number of sparse warnings
like:

warning: cast removes address space of expression
warning: incorrect type in initializer (different address spaces)
   expected unsigned int const [noderef] <asn:1>*register __p
   got unsigned int *<noident>

Since argp is already a void __user * just use it dirrectly without
the cast and make ur a __user *.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: quiet sparse noise in cfi.h

In the inline function cfi_build_cmd_addr, the cast of cmd_ofs to an
uint8_t produces a sparse warning of the type:

warning: cast truncates bits from constant value (2aa becomes aa)

Quiet the warning by masking cmd_ofs with 0xff and remove the cast.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: ixp4xx: fix reading from half-word boundary

Fix handling of reads that don't start on a half-word boundary.

Signed-off-by: Jon Ringle <jon@ringle.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: mxc-nand: don't disable clock in mxcnd-suspend

The clock must already be off after mtd->suspend.  Disabling it again
results in an negative overflow of the clock usage count.  This didn't
hurt as mxcnd_resume undid it after wake up.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: mxc-nand: no need to check for validity of platform driver data

The probe function calls platform_set_drvdata with a valid pointer when
the probe is successful.  As mxcnd_suspend and mxcnd_resume are only
called on bound devices, platform_get_drvdata always returns non-NULL.

This fix isn't critical as the pointer is always valid so it doesn't
matter if the compiler generated code for it or not.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: cfi: remove unneeded NULL checks

In cfi_intelext_setup and cfi_amdstd_setup, mtd is never NULL.
Remove unnecessary checks.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: nand: make Open Firmware device id constant

The match_table field of the struct of_device_id is constant in <linux/of_platform.h>
so it is worth to make xps2_of_match also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
struct I1 {
  ...
  const struct I2 *x;
  ...
};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
struct I1 y = {
  .x = E,
};
@c@
identifier r.I2;
identifier s.E;
@@
const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+ const
struct I2 E[] = ...;
// </smpl>

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: nand: make USB device id constant

The id_table field of the struct usb_device_id is constant in <linux/usb.h>
so it is worth to make alauda_table also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
struct I1 {
  ...
  const struct I2 *x;
  ...
};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
struct I1 y = {
  .x = E,
};
@c@
identifier r.I2;
identifier s.E;
@@
const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+ const
struct I2 E[] = ...;
// </smpl>

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: nand: make PCI device id constant

The id_table field of the struct pci_driver is constant in <linux/pci.h>
so it is worth to make cafe_nand_tbl also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
struct I1 {
  ...
  const struct I2 *x;
  ...
};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
struct I1 y = {
  .x = E,
};
@c@
identifier r.I2;
identifier s.E;
@@
const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+ const
struct I2 E[] = ...;
// </smpl>

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: nandsim: fix spelling

s/nanodeconds/nanoseconds

Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: orion_nand: Fix build failure caused by typo

Commit e99030609e27abff7e1a868cb56384c678b09984 ("mtd: orion_nand.c: add
error handling and use resource_size()") introduced a build error -- it
assigns something to a undeclared variable 'err', whereas the rest of
the code uses 'ret' for this task.

This patch fixes this typo and thus removes the build failure.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mtd: Remove now-defunct ts7250 nand driver

The ts72xx platform has been updated to use the generic platform nand
driver (plat_nand.c).  This removes the now-defunct ts7250.c nand driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Cc: Jesse Off <joff@embeddedARM.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: Update ep93xx/ts72xx to use generic platform nand driver

Update the ts72xx platform's nand driver support.

This changes the ts72xx platform from using a custom nand driver
(ts7250.c) to the generic platform nand driver (plat_nand.c).

Tested on TS-7250 with 32MiB NAND.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Matthieu Crapet <mcrapet@gmail.com>
Cc: Jesse Off <joff@embeddedARM.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

MTD DocBook: fix ioremap return type

ioremap() returns a void __iomem * not an unsigned long.  Update the
Documentation file to reflect this.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: physmap_of: Correct the size argument to kzalloc

mtd_list has type struct mtd_info **, not struct mtd_info *, so the
elements of the array should have pointer type, not structure type.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@disable sizeof_type_expr@
type T;
T **x;
@@

  x =
  <+...sizeof(
- T
+ *x
  )...+>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: nand: rename w90p910_nand.c to nuc900_nand.c

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

ARM: NUC900: rename mtd nand driver name

Due to I have renamed the platform_device.name,so this patch changes
this nand driver platform_driver name.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: drivers/mtd/nand/sh_flctl.c: use resource_size()

Use resource_size().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: tmio_nand.c: use dev_get_platdata() and resource_size()

Remove unnecessary casts and use dev_get_platdata() to retrieve the
struct mfd_cell data from the platform.

Use resource_size() for the ioremap()'s.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: drivers/mtd/nand/s3c2410.c: use resource_size()

Use resource_size().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: orion_nand.c: add error handling and use resource_size()

Use platform_get_resource() to fetch the memory resource and
add error handling for when it is missing. Use resource_size()
for the ioremap().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: nomadik_nand.c: use resource_size()

Use resource_size().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: drivers/mtd/nand/gpio.c: use resource_size()

Use resource_size().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: fls_upm.c: use resource_size()

Use resource_size().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: fsl_elbc_nand.c: user resource_size()

Use resource_size().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: davinci_nand.c: use resource_size()

The ioremap'ed sizes are off by 1; use resource_size() for correct value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: au1550nd.c: remove unnecessary casts

Remove unnecessary casts for p_nand, it is already a void __iomem *.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: au1550nd.c: use kzalloc()

Use kzalloc() instead of kmalloc()/memset().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

kmsg_dump: Dump on crash_kexec as well

crash_kexec gets called before kmsg_dump(KMSG_DUMP_OOPS) if
panic_on_oops is set, so the kernel log buffer is not stored
for this case.

This patch adds a KMSG_DUMP_KEXEC dump type which gets called
when crash_kexec() is invoked. To avoid getting double dumps,
the old KMSG_DUMP_PANIC is moved below crash_kexec(). The
mtdoops driver is modified to handle KMSG_DUMP_KEXEC in the
same way as a panic.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (90 commits)
  jffs2: Fix long-standing bug with symlink garbage collection.
  mtd: OneNAND: Fix test of unsigned in onenand_otp_walk()
  mtd: cfi_cmdset_0002, fix lock imbalance
  Revert "mtd: move mxcnd_remove to .exit.text"
  mtd: m25p80: add support for Macronix MX25L4005A
  kmsg_dump: fix build for CONFIG_PRINTK=n
  mtd: nandsim: add support for 4KiB pages
  mtd: mtdoops: refactor as a kmsg_dumper
  mtd: mtdoops: make record size configurable
  mtd: mtdoops: limit the maximum mtd partition size
  mtd: mtdoops: keep track of used/unused pages in an array
  mtd: mtdoops: several minor cleanups
  core: Add kernel message dumper to call on oopses and panics
  mtd: add ARM pismo support
  mtd: pxa3xx_nand: Fix PIO data transfer
  mtd: nand: fix multi-chip suspend problem
  mtd: add support for switching old SST chips into QRY mode
  mtd: fix M29W800D dev_id and uaddr
  mtd: don't use PF_MEMALLOC
  mtd: Add bad block table overrides to Davinci NAND driver
  ...

Fixed up conflicts (mostly trivial) in
drivers/mtd/devices/m25p80.c
drivers/mtd/maps/pcmciamtd.c
drivers/mtd/nand/pxa3xx_nand.c
kernel/printk.c

Merge branch 'next' of git://git./linux/kernel/git/kyle/parisc-2.6

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc: Fixup last users of irq_chip->typename
  parisc: convert /proc/pdc/{lcd,led} to seq_file
  parisc: Convert BUG() to use unreachable()
  parisc: Replace old style lock init in smp.c
  parisc: use sort() instead of home-made implementation (v2)
  parisc: add CALLER_ADDR{0-6} macros
  parisc: remove unused IRQSTAT_SIRQ_PEND and IRQSTAT_SZ defines
  parisc: remove duplicated #include

Merge git://git.infradead.org/iommu-2.6

* git://git.infradead.org/iommu-2.6:
  implement early_io{re,un}map for ia64
  Revert "Intel IOMMU: Avoid memory allocation failures in dma map api calls"
  intel-iommu: ignore page table validation in pass through mode
  intel-iommu: Fix oops with intel_iommu=igfx_off
  intel-iommu: Check for an RMRR which ends before it starts.
  intel-iommu: Apply BIOS sanity checks for interrupt remapping too.
  intel-iommu: Detect DMAR in hyperspace at probe time.
  dmar: Fix build failure without NUMA, warn on bogus RHSA tables and don't abort
  iommu: Allocate dma-remapping structures using numa locality info
  intr_remap: Allocate intr-remapping table using numa locality info
  dmar: Allocate queued invalidation structure using numa locality info
  dmar: support for parsing Remapping Hardware Static Affinity structure

Merge branch 'for-linus' of git://git./linux/kernel/git/bp/bp

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  edac, mce, amd: silence GART TLB errors
  edac, mce: correct corenum reporting

Merge branch 'for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (116 commits)
  V4L/DVB (13698): pms: replace asm/uaccess.h to linux/uaccess.h
  V4L/DVB (13690): radio/si470x: #include <sched.h>
  V4L/DVB (13688): au8522: modify the attributes of local filter coefficients
  V4L/DVB (13687): cx231xx: use NULL when pointer is needed
  V4L/DVB: Davinci VPFE Capture: remove unused #include <linux/version.h>
  V4L/DVB (13685): Correct code taking the size of a pointer
  V4L/DVB (13684): Fix some cut-and-paste noise in dib0090.h
  V4L/DVB (13683): sanio-ms: clean up init, exit and id_table
  V4L/DVB (13682): dib8000: make some constant static
  V4L/DVB: lgs8gxx: Use shifts rather than multiply/divide when possible
  V4L/DVB (13680b): DocBook/media: create links for included sources
  V4L/DVB (13680a): DocBook/media: copy images after building HTML
  V4L/DVB (13678): Add support for yet another DvbWorld, TeVii and Prof USB devices
  V4L/DVB (13676): configurable IRQ mode on NetUP Dual DVB-S2 CI; IRQ from CAM processing (CI interface works faster)
  V4L/DVB (13674): stv090x: Add DiSEqC envelope mode
  V4L/DVB (13673): lnbp21: Implement 22 kHz tone control
  V4L/DVB (13671): sh_mobile_ceu_camera: Remove frame size page alignment
  V4L/DVB (13670): soc-camera: Add mt9t112 camera driver
  V4L/DVB (13669): tw9910: Add sync polarity support
  V4L/DVB (13668): tw9910: remove cropping
  ...

Merge branch 'akpm'

* akpm: (173 commits)
  genalloc: use bitmap_find_next_zero_area
  ia64: use bitmap_find_next_zero_area
  sparc: use bitmap_find_next_zero_area
  mlx4: use bitmap_find_next_zero_area
  isp1362-hcd: use bitmap_find_next_zero_area
  iommu-helper: use bitmap library
  bitmap: introduce bitmap_set, bitmap_clear, bitmap_find_next_zero_area
  qnx4: use hweight8
  qnx4fs: remove remains of the (defunct) write support
  resource: constify arg to resource_size() and resource_type()
  gru: send cross partition interrupts using the gru
  gru: function to generate chipset IPI values
  gru: update driver version number
  gru: improve GRU TLB dropin statistics
  gru: fix GRU interrupt race at deallocate
  gru: add hugepage support
  gru: fix bug in allocation of kernel contexts
  gru: update GRU structures to match latest hardware spec
  gru: check for correct GRU chiplet assignment
  gru: remove stray local_irq_enable
  ...

edac, mce, amd: silence GART TLB errors

Although reporting of benign GART TLB errors is disabled in
__mcheck_cpu_apply_quirks, those are still being logged, and, as a
result, trip up amd64_edac. Pull up reporting check so that machines
with loaded edac module bail out early and don't spit fragments into
dmesg.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

genalloc: use bitmap_find_next_zero_area

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: use bitmap_find_next_zero_area

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sparc: use bitmap_find_next_zero_area

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mlx4: use bitmap_find_next_zero_area

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Roland Dreier <rolandd@cisco.com>
Cc: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

isp1362-hcd: use bitmap_find_next_zero_area

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Lothar Wassmann <LW@KARO-electronics.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

iommu-helper: use bitmap library

Use bitmap library and kill some unused iommu helper functions.

1. s/iommu_area_free/bitmap_clear/

2. s/iommu_area_reserve/bitmap_set/

3. Use bitmap_find_next_zero_area instead of find_next_zero_area

  This cannot be simple substitution because find_next_zero_area
  doesn't check the last bit of the limit in bitmap

4. Remove iommu_area_free, iommu_area_reserve, and find_next_zero_area

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bitmap: introduce bitmap_set, bitmap_clear, bitmap_find_next_zero_area

This introduces new bitmap functions:

bitmap_set: Set specified bit area
bitmap_clear: Clear specified bit area
bitmap_find_next_zero_area: Find free bit area

These are mostly stolen from iommu helper. The differences are:

- Use find_next_bit instead of doing test_bit for each bit

- Rewrite bitmap_set and bitmap_clear

  Instead of setting or clearing for each bit.

- Check the last bit of the limit

  iommu-helper doesn't want to find such area

- The return value if there is no zero area

  find_next_zero_area in iommu helper: returns -1
  bitmap_find_next_zero_area: return >= bitmap size

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Lothar Wassmann <LW@KARO-electronics.de>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

qnx4: use hweight8

Use hweight8 instead of counting for each bit

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Anders Larsen <al@alarsen.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

qnx4fs: remove remains of the (defunct) write support

commit 945ffe54bbd56ceed62de3b908800fd7c6ffb284 ("qnx4: remove write support") removed the (defunct)
write support but missed a chunk of related, dead code.

Signed-off-by: Anders Larsen <al@alarsen.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

resource: constify arg to resource_size() and resource_type()

resource_size() doesn't change the resource it operates on, so the res
parameter can be marked const.  Same for resource_type().

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: send cross partition interrupts using the gru

GRU Message queue instructions are used to deliver messages to other SSIs
within the numalink domain.  In most cases, a single GRU mesq instruction
will deliver both the message AND an interrupt to notify the other SSI
that a messsage is present.  In some cases, however, the interrupt must be
sent explicitly.

To improve resilency, the GRU driver should send these explicit interrupts
using the GRU to write the remote chipset register.  Current code sends
the interrupt using a cpu instruction to write the chipset register.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: function to generate chipset IPI values

Create a function to generate the value that is written to the UV hub MMR
to cause an IPI interrupt to be sent.  The function will be used in the
GRU message queue error recovery code that sends IPIs to nodes in remote
partitions.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: update driver version number

Update the version number of the GRU driver.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: improve GRU TLB dropin statistics

Update the TLB dropin statistics kept for each GRU context.  Count TLB
dropins separate from the misses - some misses do not result in a TLB
dropin.  Some of the diagnostics need both counts.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: fix GRU interrupt race at deallocate

Fix a race where an interrupt could be received for a GRU context that has
been deallocated.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: add hugepage support

Add support for hugepages. Easier than I originally thought.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: fix bug in allocation of kernel contexts

Fix a bug in the assignment of GRU contexts used for kernel functions.  If
a sleep occurs on the wait for a semaphore, the thread could switch cpus
and allocate resources on the wrong blade.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: update GRU structures to match latest hardware spec

Add a few new definitions for chipset MMR field names.  This matches rev
0.7 of the hardware spec.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: check for correct GRU chiplet assignment

Simplify the code that checks for correct assignment of GRU contexts to
users.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: remove stray local_irq_enable

Remove a stray local_irq_enable() in the GRU TLB dropin code.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: add symbolic names for GRU error code

Use symbol names instead of numbers for error return values for the vtop
functions.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: fix bug in exception handling

Fix a GRU driver bug converting a CBR address to the context that contains
the CBR.  The conversion is rarely done so performance does not matter.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: preload tlb for bcopy instructions

Add anticipatory TLB dropins for GRU TLB misses that occur on BCOPY
instructions that copy large amounts of data.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: expicitly set instruction status to active

Explicitly set GRU instructions to "ACTIVE".  This eliminates the need for
barriers that would have been necessary to prevent reading the instruction
"status" field before the GRU had actually started the instruction.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: add additional GRU statistics

Add additional GRU statistics & debug messages.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: update irq infrastructure

Update the GRU irq allocate/free functions to use the latest upstream
infrastructure.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: fix prefetch and speculation bugs

Fix several bugs related to prefetch, ordering & speculation:

- GRU cch_allocate() instruction causes cacheable memory
  to be created. Add a barriers to prevent speculation
  from prefetching data before it exists.
- Add memory barriers before cache-flush instructions to ensure
  that previously stored data is included in the line flushed to memory.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: check for valid vma

Fix bug caused by failure to allocate a GRU gts structure.  The old code
failed to handle the case where the vma was invalid.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: add test for gru_copy_gpa

Improve existing driver self-tests.  Add a new debugging test to the SGI
GRU driver for verifying the global GRU copy function.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gru: add debug option for cache flushing

Add a debug option to the SGI GRU driver for flushing GRU cache lines from
memory.  In theory this is not needed but it is useful for debugging.
This has no use by end users.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>