Rafael J. Wysocki [Tue, 22 Aug 2023 11:08:43 +0000 (13:08 +0200)]
Merge ACPI thermal driver changes for 6.6-rc1.
This reworks the ACPI thermal driver to use a table of generic trip
point structures on top of the internal representation of trip points
and removes thermal zone callbacks that are not necessary any more
from it.
It requires some relatively small changes to be made in the thermal core
too and it is based on top of changes reworking ACPI device notification
handling that are included in this merge.
* acpi-thermal: (24 commits)
ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
ACPI: thermal: Drop unnecessary thermal zone callbacks
ACPI: thermal: Rework thermal_get_trend()
ACPI: thermal: Use trip point table to register thermal zones
thermal: core: Rework and rename __for_each_thermal_trip()
ACPI: thermal: Introduce struct acpi_thermal_trip
ACPI: thermal: Carry out trip point updates under zone lock
ACPI: thermal: Clean up acpi_thermal_register_thermal_zone()
thermal: core: Add priv pointer to struct thermal_trip
thermal: core: Introduce thermal_zone_device_exec()
thermal: core: Do not handle trip points with invalid temperature
ACPI: thermal: Drop redundant local variable from acpi_thermal_resume()
ACPI: thermal: Do not attach private data to ACPI handles
ACPI: thermal: Drop enabled flag from struct acpi_thermal_active
ACPI: thermal: Drop nocrt parameter
ACPI: thermal: Install Notify() handler directly
ACPI: NFIT: Remove unnecessary .remove callback
ACPI: NFIT: Install Notify() handler directly
ACPI: HED: Install Notify() handler directly
ACPI: battery: Install Notify() handler directly
...
Rafael J. Wysocki [Mon, 21 Aug 2023 10:40:49 +0000 (12:40 +0200)]
Merge Intel DTS IOSF thermal driver changes for 6.6-rc1.
These fix a few issues in the Intel DTS IOSF thermal driver, clean up
code in it and make it use trip point tables for registering thermal
zones.
* thermal-intel:
thermal: intel: intel_soc_dts_iosf: Use struct thermal_trip
thermal: intel: intel_soc_dts_iosf: Rework critical trip setup
thermal: intel: intel_soc_dts_iosf: Add helper for resetting trip points
thermal: intel: intel_soc_dts_iosf: Change initialization ordering
thermal: intel: intel_soc_dts_iosf: Pass sensors to update_trip_temp()
thermal: intel: intel_soc_dts_iosf: Untangle update_trip_temp()
thermal: intel: intel_soc_dts_iosf: Always assume notification support
thermal: intel: intel_soc_dts_iosf: Drop redundant symbol definition
thermal: intel: intel_soc_dts_iosf: Always use 2 trips
Rafael J. Wysocki [Thu, 17 Aug 2023 09:25:29 +0000 (11:25 +0200)]
ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
Move the acpi_bus_generate_netlink_event() invocation into
acpi_thermal_trips_update() which allows the code duplication in
acpi_thermal_notify() to be cleaned up, but for this purpose the
event value needs to be passed to acpi_thermal_trips_update() and
from there to acpi_thermal_adjust_thermal_zone() which has to
determine the flag value for __acpi_thermal_trips_update() by
itself.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Mon, 7 Aug 2023 18:18:49 +0000 (20:18 +0200)]
ACPI: thermal: Drop unnecessary thermal zone callbacks
Drop the .get_trip_type(), .get_trip_temp() and .get_crit_temp() thermal
zone callbacks that are not necessary any more from the ACPI thermal
driver along with the corresponding callback functions.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Mon, 7 Aug 2023 18:17:07 +0000 (20:17 +0200)]
ACPI: thermal: Rework thermal_get_trend()
Rework the ACPI thermal driver's .get_trend() callback function,
thermal_get_trend(), so that it does not call thermal_get_trip_type()
and thermal_get_trip_temp() which are going to be dropped.
This reduces the overhead of the function too, because it will always
carry out a trip point lookup once after the change.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Wed, 9 Aug 2023 11:07:23 +0000 (13:07 +0200)]
ACPI: thermal: Use trip point table to register thermal zones
Make the ACPI thermal driver use thermal_zone_device_register_with_trips()
to register its thermal zones.
For this purpose, make it create a trip point table that will be passed to
thermal_zone_device_register_with_trips() as an argument.
Also use the thermal_zone_update_trip_temp() helper introduced
previously to update temperatures of the passive and active trip
points after a trip points change notification from the platform
firmware.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Mon, 7 Aug 2023 18:11:07 +0000 (20:11 +0200)]
thermal: core: Rework and rename __for_each_thermal_trip()
Rework the currently unused __for_each_thermal_trip() to pass original
pointers to struct thermal_trip objects to the callback, so it can be
used for updating trip data (e.g. temperatures), rename it to
for_each_thermal_trip() and make it available to modular drivers.
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Mon, 7 Aug 2023 18:10:06 +0000 (20:10 +0200)]
ACPI: thermal: Introduce struct acpi_thermal_trip
Add struct acpi_thermal_trip to contain the temperature and valid flag
of each trip point in the driver's local data structures.
This helps to make the subsequent changes more straightforward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Thu, 17 Aug 2023 09:24:27 +0000 (11:24 +0200)]
ACPI: thermal: Carry out trip point updates under zone lock
There is a race condition between acpi_thermal_trips_update() and
acpi_thermal_check_fn(), because the trip points may get updated while
the latter is running which in theory may lead to inconsistent results.
For example, if two trips are updated together, using the temperature
value of one of them from before the update and the temperature value
of the other one from after the update may not lead to the expected
outcome.
Moreover, if thermal_get_trend() runs when a trip points update is in
progress, it may end up using stale trip point temperatures.
To address this, make acpi_thermal_trips_update() call
thermal_zone_device_exec() to carry out the trip points update and
use a new acpi_thermal_adjust_thermal_zone() wrapper around
__acpi_thermal_trips_update() as the callback function for the latter.
While at it, change the acpi_thermal_trips_update() return data type
to void as that function always returns 0 anyway.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Mon, 7 Aug 2023 18:06:13 +0000 (20:06 +0200)]
ACPI: thermal: Clean up acpi_thermal_register_thermal_zone()
Rename the trips variable in acpi_thermal_register_thermal_zone() to
trip_count so its name better reflects the purpose, rearrange white
space in the loop over active trips for clarity and reduce code
duplication related to calling thermal_zone_device_register() by
using an extra local variable to store the passive delay value.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Mon, 7 Aug 2023 18:04:47 +0000 (20:04 +0200)]
thermal: core: Add priv pointer to struct thermal_trip
Add a new field called priv to struct thermal_trip to allow thermal
drivers to store pointers to their local data associated with trip
points.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Rafael J. Wysocki [Thu, 17 Aug 2023 09:23:32 +0000 (11:23 +0200)]
thermal: core: Introduce thermal_zone_device_exec()
Introduce a new helper function, thermal_zone_device_exec(), that can
be used by drivers to run a given callback routine under the zone lock.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Thu, 10 Aug 2023 19:17:36 +0000 (21:17 +0200)]
thermal: intel: intel_soc_dts_iosf: Use struct thermal_trip
Because the number of trip points in each thermal zone and their
types are known to intel_soc_dts_iosf_init() prior to the registration
of the thermal zones, make it create an array of struct thermal_trip
entries in each struct intel_soc_dts_sensor_entry object and make
add_dts_thermal_zone() use thermal_zone_device_register_with_trips()
for thermal zone registration and pass that array as its second
argument.
Drop the sys_get_trip_temp() and sys_get_trip_type() callback
functions along with the respective callback pointers in
tzone_ops, because they are not necessary any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Rafael J. Wysocki [Thu, 10 Aug 2023 19:16:14 +0000 (21:16 +0200)]
thermal: intel: intel_soc_dts_iosf: Rework critical trip setup
Critical trip points appear in the DTS thermal zones only after those
thermal zones have been registered via intel_soc_dts_iosf_init().
Moreover, they are "created" by changing the type of an existing trip
point from THERMAL_TRIP_PASSIVE to THERMAL_TRIP_CRITICAL via
intel_soc_dts_iosf_add_read_only_critical_trip(), the caller of which
has to be careful enough to pass at least 1 as the number of read-only
trip points to intel_soc_dts_iosf_init() beforehand.
This is questionable, because user space may have started to use the
trips at the time when intel_soc_dts_iosf_add_read_only_critical_trip()
runs and there is no synchronization between it and sys_set_trip_temp().
To address it, use the observation that nonzero number of read-only
trip points is only passed to intel_soc_dts_iosf_init() when critical
trip points are going to be used, so in fact that function may get all
of the information regarding the critical trip points upfront and it
can configure them before registering the corresponding thermal zones.
Accordingly, replace the read_only_trip_count argument of
intel_soc_dts_iosf_init() with a pair of new arguments related to
critical trip points: a bool one indicating whether or not critical
trip points are to be used at all and an int one representing the
critical trip point temperature offset relative to Tj_max. Use these
arguments to configure the critical trip points before the registration
of the thermal zones and to compute the number of writeable trip points
in add_dts_thermal_zone().
Modify both callers of intel_soc_dts_iosf_init() to take these changes
into account and drop the intel_soc_dts_iosf_add_read_only_critical_trip()
call, that is not necessary any more, from intel_soc_thermal_init(),
which also allows it to return success right after requesting the IRQ.
Finally, drop intel_soc_dts_iosf_add_read_only_critical_trip()
altogether, because it does not have any more users.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Rafael J. Wysocki [Thu, 10 Aug 2023 19:14:49 +0000 (21:14 +0200)]
thermal: intel: intel_soc_dts_iosf: Add helper for resetting trip points
Because trip points are reset for each sensor in two places in the
same way, add a helper function for that to reduce code duplication
a bit.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Rafael J. Wysocki [Thu, 10 Aug 2023 19:13:25 +0000 (21:13 +0200)]
thermal: intel: intel_soc_dts_iosf: Change initialization ordering
The initial configuration of trip points in intel_soc_dts_iosf_init()
takes place after registering the sensor thermal zones which is
potentially problematic, because it may race with the setting of trip
point temperatures via sysfs, as there is no synchronization between it
and sys_set_trip_temp().
To address this, change the initialization ordering so that the trip
points are configured prior to the registration of thermal zones.
Accordingly, change the cleanup ordering in intel_soc_dts_iosf_exit()
to remove the thermal zones before resetting the trip points.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Rafael J. Wysocki [Thu, 10 Aug 2023 19:12:32 +0000 (21:12 +0200)]
thermal: intel: intel_soc_dts_iosf: Pass sensors to update_trip_temp()
After previous changes, update_trip_temp() only uses its dts argument to
get to the sensors field in the struct intel_soc_dts_sensor_entry object
pointed to by that argument, so pass the value of that field directly to
it instead.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Rafael J. Wysocki [Thu, 10 Aug 2023 19:11:26 +0000 (21:11 +0200)]
thermal: intel: intel_soc_dts_iosf: Untangle update_trip_temp()
Function update_trip_temp() is currently used for the initialization
of trip points as well as for changing trip point temperatures in
sys_set_trip_temp().
This is quite confusing and passing the value of dts->trip_types[trip]
to it so that it can store that value in the same memory location is
not particularly useful, because it only is necessary to set the
trip point type once, at the initialization time.
For this reason, drop the last argument from update_trip_temp() and
introduce configure_trip() calling the former internally for the
initial configuration of trip points.
Modify the majority of update_trip_temp() callers to use
configure_trip() instead of it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Rafael J. Wysocki [Thu, 10 Aug 2023 19:09:54 +0000 (21:09 +0200)]
thermal: intel: intel_soc_dts_iosf: Always assume notification support
None of the existing callers of intel_soc_dts_iosf_init() passes
INTEL_SOC_DTS_INTERRUPT_NONE as the first argument to it, so the
notification local variable in it is always true and the
notification_support argument of add_dts_thermal_zone() is always
true either.
For this reason, drop the notification local variable from
intel_soc_dts_iosf_init() and the notification_support argument from
add_dts_thermal_zone() and rearrange the latter to always set
writable_trip_cnt and trip_mask.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Rafael J. Wysocki [Wed, 9 Aug 2023 20:28:12 +0000 (22:28 +0200)]
thermal: intel: intel_soc_dts_iosf: Drop redundant symbol definition
SOC_MAX_DTS_SENSORS is already defined in intel_soc_dts_iosf.h which is
included in intel_soc_dts_iosf.c, so it does not need to be defined in
the latter again.
Drop the redundant definition of that symbol from intel_soc_dts_iosf.c.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Rafael J. Wysocki [Wed, 9 Aug 2023 20:27:18 +0000 (22:27 +0200)]
thermal: intel: intel_soc_dts_iosf: Always use 2 trips
Both the existing callers of intel_soc_dts_iosf_init() pass 2 as the trip
count argument, so it can be replaced with SOC_MAX_DTS_TRIPS everywhere in
the code and the trip_count argument of that function can be dropped.
This also allows the trip_count field to be dropped from struct
intel_soc_dts_sensor_entry, as it is always equal to 2, and some
related code can be simplified.
Make changes accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Rafael J. Wysocki [Mon, 7 Aug 2023 18:01:24 +0000 (20:01 +0200)]
thermal: core: Do not handle trip points with invalid temperature
Trip points with temperature set to THERMAL_TEMP_INVALID are as good as
disabled, so make handle_thermal_trip() ignore them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Rafael J. Wysocki [Thu, 10 Aug 2023 18:56:51 +0000 (20:56 +0200)]
Merge 'acpi-bus' material for v6.6 to satisfy dependencies.
Rafael J. Wysocki [Thu, 10 Aug 2023 18:49:08 +0000 (20:49 +0200)]
ACPI: thermal: Drop redundant local variable from acpi_thermal_resume()
Commit
dabc621a3110 ("ACPI: thermal: Drop enabled flag from struct
acpi_thermal_active") left behind a variable that is only assigned to
and never read, so drop it now.
Fixes:
dabc621a3110 ("ACPI: thermal: Drop enabled flag from struct acpi_thermal_active")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Tue, 8 Aug 2023 20:15:15 +0000 (22:15 +0200)]
ACPI: thermal: Do not attach private data to ACPI handles
The ACPI thermal driver uses acpi_bus_attach_private_data() to attach
the thermal zone object to the ACPI handle of the thermal zone and
acpi_bus_detach_private_data() to clean that up, but it never uses
acpi_bus_get_private_data() to retrieve that object.
Drop the unneded acpi_bus_attach_private_data() and
acpi_bus_detach_private_data() calls from the ACPI thermal driver and
clean up the related code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Rafael J. Wysocki [Tue, 25 Jul 2023 18:06:37 +0000 (20:06 +0200)]
ACPI: thermal: Drop enabled flag from struct acpi_thermal_active
The enabled field of struct acpi_thermal_active is only updated and never
read, so drop it along with the related code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rob Herring [Fri, 14 Jul 2023 17:50:07 +0000 (11:50 -0600)]
thermal: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Mon, 31 Jul 2023 17:59:26 +0000 (19:59 +0200)]
Merge back new thermal control material for v6.6.
Ahmad Fatoum [Sat, 8 Jul 2023 11:27:20 +0000 (13:27 +0200)]
thermal: of: fix double-free on unregistration
Since commit
3d439b1a2ad3 ("thermal/core: Alloc-copy-free the thermal
zone parameters structure"), thermal_zone_device_register() allocates
a copy of the tzp argument and frees it when unregistering, so
thermal_of_zone_register() now ends up leaking its original tzp and
double-freeing the tzp copy. Fix this by locating tzp on stack instead.
Fixes:
3d439b1a2ad3 ("thermal/core: Alloc-copy-free the thermal zone parameters structure")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: 6.4+ <stable@vger.kernel.org> # 6.4+: 8bcbb18c61d6: thermal: core: constify params in thermal_zone_device_register
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ahmad Fatoum [Sat, 8 Jul 2023 11:27:19 +0000 (13:27 +0200)]
thermal: core: constify params in thermal_zone_device_register
Since commit
3d439b1a2ad3 ("thermal/core: Alloc-copy-free the thermal zone
parameters structure"), thermal_zone_device_register() allocates a copy
of the tzp argument and callers need not explicitly manage its lifetime.
This means the function no longer cares about the parameter being
mutable, so constify it.
No functional change.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Sun, 23 Jul 2023 22:24:10 +0000 (15:24 -0700)]
Linux 6.5-rc3
Linus Torvalds [Sun, 23 Jul 2023 22:19:14 +0000 (15:19 -0700)]
Merge tag 'trace-v6.5-rc2' of git://git./linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Swapping the ring buffer for snapshotting (for things like irqsoff)
can crash if the ring buffer is being resized. Disable swapping when
this happens. The missed swap will be reported to the tracer
- Report error if the histogram fails to be created due to an error in
adding a histogram variable, in event_hist_trigger_parse()
- Remove unused declaration of tracing_map_set_field_descr()
* tag 'trace-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/histograms: Return an error if we fail to add histogram to hist_vars list
ring-buffer: Do not swap cpu_buffer during resize process
tracing: Remove unused extern declaration tracing_map_set_field_descr()
Linus Torvalds [Sun, 23 Jul 2023 21:55:41 +0000 (14:55 -0700)]
Merge tag 'kbuild-fixes-v6.5' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix stale help text in gconfig
- Support *.S files in compile_commands.json
- Flatten KBUILD_CFLAGS
- Fix external module builds with Rust so that temporary files are
created in the modules directories instead of the kernel tree
* tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: rust: avoid creating temporary files
kbuild: flatten KBUILD_CFLAGS
gen_compile_commands: add assembly files to compilation database
kconfig: gconfig: correct program name in help text
kconfig: gconfig: drop the Show Debug Info help text
Miguel Ojeda [Sun, 23 Jul 2023 14:21:28 +0000 (16:21 +0200)]
kbuild: rust: avoid creating temporary files
`rustc` outputs by default the temporary files (i.e. the ones saved
by `-Csave-temps`, such as `*.rcgu*` files) in the current working
directory when `-o` and `--out-dir` are not given (even if
`--emit=x=path` is given, i.e. it does not use those for temporaries).
Since out-of-tree modules are compiled from the `linux` tree,
`rustc` then tries to create them there, which may not be accessible.
Thus pass `--out-dir` explicitly, even if it is just for the temporary
files.
Similarly, do so for Rust host programs too.
Reported-by: Raphael Nestler <raphael.nestler@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/1015
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Raphael Nestler <raphael.nestler@gmail.com> # non-hostprogs
Tested-by: Andrea Righi <andrea.righi@canonical.com> # non-hostprogs
Fixes:
295d8398c67e ("kbuild: specify output names separately for each emission type from rustc")
Cc: stable@vger.kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus Torvalds [Sun, 23 Jul 2023 17:44:38 +0000 (10:44 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Avoid pKVM finalization if KVM initialization fails
- Add missing BTI instructions in the hypervisor, fixing an early
boot failure on BTI systems
- Handle MMU notifiers correctly for non hugepage-aligned memslots
- Work around a bug in the architecture where hypervisor timer
controls have UNKNOWN behavior under nested virt
- Disable preemption in kvm_arch_hardware_enable(), fixing a kernel
BUG in cpu hotplug resulting from per-CPU accessor sanity checking
- Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
- Uphold RES0 sysreg behavior when emulating older PMU versions
- Avoid macro expansion when initializing PMU register names,
ensuring the tracepoints pretty-print the sysreg
s390:
- Two fixes for asynchronous destroy
x86 fixes will come early next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: pv: fix index value of replaced ASCE
KVM: s390: pv: simplify shutdown and fix race
KVM: arm64: Fix the name of sys_reg_desc related to PMU
KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount
KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption
KVM: arm64: Add missing BTI instructions
KVM: arm64: Correctly handle page aging notifiers for unaligned memslot
KVM: arm64: Disable preemption in kvm_arch_hardware_enable()
KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm
KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits
Linus Torvalds [Sun, 23 Jul 2023 17:21:49 +0000 (10:21 -0700)]
Merge tag 'ext4_for_linus-6.5-rc3' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug and regression fixes for 6.5-rc3 for ext4's mballoc and jbd2's
checkpoint code"
* tag 'ext4_for_linus-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix rbtree traversal bug in ext4_mb_use_preallocated
ext4: fix off by one issue in ext4_mb_choose_next_group_best_avail()
ext4: correct inline offset when handling xattrs in inode body
jbd2: remove __journal_try_to_free_buffer()
jbd2: fix a race when checking checkpoint buffer busy
jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint
jbd2: remove journal_clean_one_cp_list()
jbd2: remove t_checkpoint_io_list
jbd2: recheck chechpointing non-dirty buffer
Linus Torvalds [Sun, 23 Jul 2023 17:16:44 +0000 (10:16 -0700)]
Merge tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fix from Steve French:
"Add minor debugging improvement.
The change improves ability to read a network trace to debug problems
on encrypted connections which are very common (e.g. using wireshark
or tcpdump).
That works today with tools like 'smbinfo keys /mnt/file' but requires
passing in a filename on the mount (see e.g. [1]), but it often makes
more sense to just pass in the mount point path (ie a directory not a
filename).
So this fix was needed to debug some types of problems (an obvious
example is on an encrypted connection failing operations on an empty
share or with no files in the root of the directory) - so you can
simply pass in the 'smbinfo keys <mntpoint>' and get the information
that wireshark needs"
Link: https://wiki.samba.org/index.php/Wireshark_Decryption
* tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number for cifs.ko
cifs: allow dumping keys for directories too
Paolo Bonzini [Sun, 23 Jul 2023 16:50:30 +0000 (12:50 -0400)]
Merge tag 'kvm-s390-master-6.5-1' of https://git./linux/kernel/git/kvms390/linux into HEAD
Two fixes for asynchronous destroy
Paolo Bonzini [Sun, 23 Jul 2023 16:50:14 +0000 (12:50 -0400)]
Merge tag 'kvmarm-fixes-6.5-1' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.5, part #1
- Avoid pKVM finalization if KVM initialization fails
- Add missing BTI instructions in the hypervisor, fixing an early boot
failure on BTI systems
- Handle MMU notifiers correctly for non hugepage-aligned memslots
- Work around a bug in the architecture where hypervisor timer controls
have UNKNOWN behavior under nested virt.
- Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG
in cpu hotplug resulting from per-CPU accessor sanity checking.
- Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
- Uphold RES0 sysreg behavior when emulating older PMU versions
- Avoid macro expansion when initializing PMU register names, ensuring
the tracepoints pretty-print the sysreg.
Mohamed Khalfella [Fri, 14 Jul 2023 20:33:41 +0000 (20:33 +0000)]
tracing/histograms: Return an error if we fail to add histogram to hist_vars list
Commit
6018b585e8c6 ("tracing/histograms: Add histograms to hist_vars if
they have referenced variables") added a check to fail histogram creation
if save_hist_vars() failed to add histogram to hist_vars list. But the
commit failed to set ret to failed return code before jumping to
unregister histogram, fix it.
Link: https://lore.kernel.org/linux-trace-kernel/20230714203341.51396-1-mkhalfella@purestorage.com
Cc: stable@vger.kernel.org
Fixes:
6018b585e8c6 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Chen Lin [Wed, 19 Jul 2023 07:58:47 +0000 (15:58 +0800)]
ring-buffer: Do not swap cpu_buffer during resize process
When ring_buffer_swap_cpu was called during resize process,
the cpu buffer was swapped in the middle, resulting in incorrect state.
Continuing to run in the wrong state will result in oops.
This issue can be easily reproduced using the following two scripts:
/tmp # cat test1.sh
//#! /bin/sh
for i in `seq 0 100000`
do
echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb
sleep 0.5
echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb
sleep 0.5
done
/tmp # cat test2.sh
//#! /bin/sh
for i in `seq 0 100000`
do
echo irqsoff > /sys/kernel/debug/tracing/current_tracer
sleep 1
echo nop > /sys/kernel/debug/tracing/current_tracer
sleep 1
done
/tmp # ./test1.sh &
/tmp # ./test2.sh &
A typical oops log is as follows, sometimes with other different oops logs.
[ 231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8
[ 231.713375] Modules linked in:
[ 231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15
[ 231.716750] Hardware name: linux,dummy-virt (DT)
[ 231.718152] Workqueue: events update_pages_handler
[ 231.719714] pstate:
60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 231.721171] pc : rb_update_pages+0x378/0x3f8
[ 231.722212] lr : rb_update_pages+0x25c/0x3f8
[ 231.723248] sp :
ffff800082b9bd50
[ 231.724169] x29:
ffff800082b9bd50 x28:
ffff8000825f7000 x27:
0000000000000000
[ 231.726102] x26:
0000000000000001 x25:
fffffffffffff010 x24:
0000000000000ff0
[ 231.728122] x23:
ffff0000c3a0b600 x22:
ffff0000c3a0b5c0 x21:
fffffffffffffe0a
[ 231.730203] x20:
ffff0000c3a0b600 x19:
ffff0000c0102400 x18:
0000000000000000
[ 231.732329] x17:
0000000000000000 x16:
0000000000000000 x15:
0000ffffe7aa8510
[ 231.734212] x14:
0000000000000000 x13:
0000000000000000 x12:
0000000000000002
[ 231.736291] x11:
ffff8000826998a8 x10:
ffff800082b9baf0 x9 :
ffff800081137558
[ 231.738195] x8 :
fffffc00030e82c8 x7 :
0000000000000000 x6 :
0000000000000001
[ 231.740192] x5 :
ffff0000ffbafe00 x4 :
0000000000000000 x3 :
0000000000000000
[ 231.742118] x2 :
00000000000006aa x1 :
0000000000000001 x0 :
ffff0000c0007208
[ 231.744196] Call trace:
[ 231.744892] rb_update_pages+0x378/0x3f8
[ 231.745893] update_pages_handler+0x1c/0x38
[ 231.746893] process_one_work+0x1f0/0x468
[ 231.747852] worker_thread+0x54/0x410
[ 231.748737] kthread+0x124/0x138
[ 231.749549] ret_from_fork+0x10/0x20
[ 231.750434] ---[ end trace
0000000000000000 ]---
[ 233.720486] Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
[ 233.721696] Mem abort info:
[ 233.721935] ESR = 0x0000000096000004
[ 233.722283] EC = 0x25: DABT (current EL), IL = 32 bits
[ 233.722596] SET = 0, FnV = 0
[ 233.722805] EA = 0, S1PTW = 0
[ 233.723026] FSC = 0x04: level 0 translation fault
[ 233.723458] Data abort info:
[ 233.723734] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 233.724176] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 233.724589] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=
0000000104943000
[ 233.725592] [
0000000000000000] pgd=
0000000000000000, p4d=
0000000000000000
[ 233.726231] Internal error: Oops:
0000000096000004 [#1] PREEMPT SMP
[ 233.726720] Modules linked in:
[ 233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15
[ 233.727777] Hardware name: linux,dummy-virt (DT)
[ 233.728225] Workqueue: events update_pages_handler
[ 233.728655] pstate:
200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 233.729054] pc : rb_update_pages+0x1a8/0x3f8
[ 233.729334] lr : rb_update_pages+0x154/0x3f8
[ 233.729592] sp :
ffff800082b9bd50
[ 233.729792] x29:
ffff800082b9bd50 x28:
ffff8000825f7000 x27:
0000000000000000
[ 233.730220] x26:
0000000000000000 x25:
ffff800082a8b840 x24:
ffff0000c0102418
[ 233.730653] x23:
0000000000000000 x22:
fffffc000304c880 x21:
0000000000000003
[ 233.731105] x20:
00000000000001f4 x19:
ffff0000c0102400 x18:
ffff800082fcbc58
[ 233.731727] x17:
0000000000000000 x16:
0000000000000001 x15:
0000000000000001
[ 233.732282] x14:
ffff8000825fe0c8 x13:
0000000000000001 x12:
0000000000000000
[ 233.732709] x11:
ffff8000826998a8 x10:
0000000000000ae0 x9 :
ffff8000801b760c
[ 233.733148] x8 :
fefefefefefefeff x7 :
0000000000000018 x6 :
ffff0000c03298c0
[ 233.733553] x5 :
0000000000000002 x4 :
0000000000000000 x3 :
0000000000000000
[ 233.733972] x2 :
ffff0000c3a0b600 x1 :
0000000000000000 x0 :
0000000000000000
[ 233.734418] Call trace:
[ 233.734593] rb_update_pages+0x1a8/0x3f8
[ 233.734853] update_pages_handler+0x1c/0x38
[ 233.735148] process_one_work+0x1f0/0x468
[ 233.735525] worker_thread+0x54/0x410
[ 233.735852] kthread+0x124/0x138
[ 233.736064] ret_from_fork+0x10/0x20
[ 233.736387] Code:
92400000 910006b5 aa000021 aa0303f7 (
f9400060)
[ 233.736959] ---[ end trace
0000000000000000 ]---
After analysis, the seq of the error is as follows [1-5]:
int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
int cpu_id)
{
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
//1. get cpu_buffer, aka cpu_buffer(A)
...
...
schedule_work_on(cpu,
&cpu_buffer->update_pages_work);
//2. 'update_pages_work' is queue on 'cpu', cpu_buffer(A) is passed to
// update_pages_handler, do the update process, set 'update_done' in
// complete(&cpu_buffer->update_done) and to wakeup resize process.
//---->
//3. Just at this moment, ring_buffer_swap_cpu is triggered,
//cpu_buffer(A) be swaped to cpu_buffer(B), the max_buffer.
//ring_buffer_swap_cpu is called as the 'Call trace' below.
Call trace:
dump_backtrace+0x0/0x2f8
show_stack+0x18/0x28
dump_stack+0x12c/0x188
ring_buffer_swap_cpu+0x2f8/0x328
update_max_tr_single+0x180/0x210
check_critical_timing+0x2b4/0x2c8
tracer_hardirqs_on+0x1c0/0x200
trace_hardirqs_on+0xec/0x378
el0_svc_common+0x64/0x260
do_el0_svc+0x90/0xf8
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb8
el0_sync+0x180/0x1c0
//<----
/* wait for all the updates to complete */
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
//4. get cpu_buffer, cpu_buffer(B) is used in the following process,
//the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong.
//for example, cpu_buffer(A)->update_done will leave be set 1, and will
//not 'wait_for_completion' at the next resize round.
if (!cpu_buffer->nr_pages_to_update)
continue;
if (cpu_online(cpu))
wait_for_completion(&cpu_buffer->update_done);
cpu_buffer->nr_pages_to_update = 0;
}
...
}
//5. the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong,
//Continuing to run in the wrong state, then oops occurs.
Link: https://lore.kernel.org/linux-trace-kernel/202307191558478409990@zte.com.cn
Signed-off-by: Chen Lin <chen.lin5@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
YueHaibing [Sat, 22 Jul 2023 03:21:23 +0000 (11:21 +0800)]
tracing: Remove unused extern declaration tracing_map_set_field_descr()
Since commit
08d43a5fa063 ("tracing: Add lock-free tracing_map"),
this is never used, so can be removed.
Link: https://lore.kernel.org/linux-trace-kernel/20230722032123.24664-1-yuehaibing@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Alexey Dobriyan [Thu, 13 Jul 2023 18:52:28 +0000 (21:52 +0300)]
kbuild: flatten KBUILD_CFLAGS
Make it slightly easier to see which compiler options are added and
removed (and not worry about column limit too!).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Benjamin Gray [Wed, 19 Jul 2023 03:19:12 +0000 (13:19 +1000)]
gen_compile_commands: add assembly files to compilation database
Like C source files, tooling can find it useful to have the assembly
source file compilation recorded.
The .S extension appears to used across all architectures.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Ojaswin Mujoo [Sat, 22 Jul 2023 17:15:24 +0000 (22:45 +0530)]
ext4: fix rbtree traversal bug in ext4_mb_use_preallocated
During allocations, while looking for preallocations(PA) in the per
inode rbtree, we can't do a direct traversal of the tree because
ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted
and that can cause direct traversal to skip some entries. This was
leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy
our request and ultimately tried to create a new PA that would overlap
with the missed one.
To makes sure we handle that case while still keeping the performance of
the rbtree, we make use of the fact that the only pa that could possibly
overlap the original goal start is the one that satisfies the below
conditions:
1. It must have it's logical start immediately to the left of
(ie less than) original logical start.
2. It must not be deleted
To find this pa we use the following traversal method:
1. Descend into the rbtree normally to find the immediate neighboring
PA. Here we keep descending irrespective of if the PA is deleted or if
it overlaps with our request etc. The goal is to find an immediately
adjacent PA.
2. If the found PA is on right of original goal, use rb_prev() to find
the left adjacent PA.
3. Check if this PA is deleted and keep moving left with rb_prev() until
a non deleted PA is found.
4. This is the PA we are looking for. Now we can check if it can satisfy
the original request and proceed accordingly.
This approach also takes care of having deleted PAs in the tree.
(While we are at it, also fix a possible overflow bug in calculating the
end of a PA)
[1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/
Cc: stable@kernel.org # 6.4
Fixes:
3872778664e3 ("ext4: Use rbtrees to manage PAs instead of inode i_prealloc_list")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Tested-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Link: https://lore.kernel.org/r/edd2efda6a83e6343c5ace9deea44813e71dbe20.1690045963.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ojaswin Mujoo [Fri, 9 Jun 2023 10:34:03 +0000 (16:04 +0530)]
ext4: fix off by one issue in ext4_mb_choose_next_group_best_avail()
In ext4_mb_choose_next_group_best_avail(), we want the start order to be
1 less than goal length and the min_order to be, at max, 1 more than the
original length. This commit fixes an off by one issue that arose due to
the fact that 1 << fls(n) > (n).
After all the processing:
order = 1 order below goal len
min_order = maximum of the three:-
- order - trim_order
- 1 order below B2C(s_stripe)
- 1 order above original len
Cc: stable@kernel.org
Fixes:
33122aa930 ("ext4: Add allocation criteria 1.5 (CR1_5)")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609103403.112807-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Eric Whitney [Mon, 22 May 2023 18:15:20 +0000 (14:15 -0400)]
ext4: correct inline offset when handling xattrs in inode body
When run on a file system where the inline_data feature has been
enabled, xfstests generic/269, generic/270, and generic/476 cause ext4
to emit error messages indicating that inline directory entries are
corrupted. This occurs because the inline offset used to locate
inline directory entries in the inode body is not updated when an
xattr in that shared region is deleted and the region is shifted in
memory to recover the space it occupied. If the deleted xattr precedes
the system.data attribute, which points to the inline directory entries,
that attribute will be moved further up in the region. The inline
offset continues to point to whatever is located in system.data's former
location, with unfortunate effects when used to access directory entries
or (presumably) inline data in the inode body.
Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20230522181520.1570360-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Linus Torvalds [Sun, 23 Jul 2023 02:32:00 +0000 (19:32 -0700)]
Merge tag 'powerpc-6.5-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Reinstate support for little endian ELFv1 binaries, which it turns
out still exist in the wild.
- Revert a change which used asm goto for WARN_ON/__WARN_FLAGS, as it
lead to dead code generation and seemed to trigger compiler bugs in
some edge cases.
- Fix a deadlock in the pseries VAS code, between live migration and
the driver's mmap handler.
- Disable KCOV instrumentation in the powerpc KASAN code.
Thanks to Andrew Donnellan, Benjamin Gray, Christophe Leroy, Haren
Myneni, Russell Currey, and Uwe Kleine-König.
* tag 'powerpc-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc/64s: Remove support for ELFv1 little endian userspace"
powerpc/kasan: Disable KCOV in KASAN code
powerpc/512x: lpbfifo: Convert to platform remove callback returning void
powerpc/crypto: Add gitignore for generated P10 AES/GCM .S files
Revert "powerpc/bug: Provide better flexibility to WARN_ON/__WARN_FLAGS() with asm goto"
powerpc/pseries/vas: Hold mmap_mutex after mmap lock during window close
Steve French [Thu, 20 Jul 2023 13:30:32 +0000 (08:30 -0500)]
cifs: update internal module version number for cifs.ko
From 2.43 to 2.44
Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Fri, 16 Jun 2023 10:37:46 +0000 (10:37 +0000)]
cifs: allow dumping keys for directories too
Dumping the enc/dec keys is a session wide operation.
And it should not matter if the ioctl was run on
a regular file or a directory.
Currently, we obtain the tcon pointer from the
cifs file handle. But since there's no dir open call
in cifs, this is not populated for dirs.
This change allows dumping of session keys using ioctl
even for directories. To do this, we'll now get the
tcon pointer from the superblock, and not from the file
handle.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Sat, 22 Jul 2023 18:24:03 +0000 (11:24 -0700)]
Merge tag 's390-6.5-3' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix per vma lock fault handling: add missing !(fault & VM_FAULT_ERROR)
check to fault handler to prevent error handling for return values
that don't indicate an error
- Use kfree_sensitive() instead of kfree() in paes crypto code to clear
memory that may contain keys before freeing it
- Fix reply buffer size calculation for CCA replies in zcrypt device
driver
* tag 's390-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: fix reply buffer calculations for CCA replies
s390/crypto: use kfree_sensitive() instead of kfree()
s390/mm: fix per vma lock fault handling
Linus Torvalds [Sat, 22 Jul 2023 18:05:15 +0000 (11:05 -0700)]
Merge tag 'block-6.5-2023-07-21' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix for loop regressions (Mauricio)
- Fix a potential stall with batched wakeups in sbitmap (David)
- Fix for stall with recursive plug flushes (Ross)
- Skip accounting of empty requests for blk-iocost (Chengming)
- Remove a dead field in struct blk_mq_hw_ctx (Chengming)
* tag 'block-6.5-2023-07-21' of git://git.kernel.dk/linux:
loop: do not enforce max_loop hard limit by (new) default
loop: deprecate autoloading callback loop_probe()
sbitmap: fix batching wakeup
blk-iocost: skip empty flush bio in iocost
blk-mq: delete dead struct blk_mq_hw_ctx->queued field
blk-mq: Fix stall due to recursive flush plug
Linus Torvalds [Sat, 22 Jul 2023 17:46:30 +0000 (10:46 -0700)]
Merge tag 'io_uring-6.5-2023-07-21' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix for io-wq not always honoring REQ_F_NOWAIT, if it was set and
punted directly (eg via DRAIN) (me)
- Capability check fix (Ondrej)
- Regression fix for the mmap changes that went into 6.4, which
apparently broke IA64 (Helge)
* tag 'io_uring-6.5-2023-07-21' of git://git.kernel.dk/linux:
ia64: mmap: Consider pgoff when searching for free mapping
io_uring: Fix io_uring mmap() by using architecture-provided get_unmapped_area()
io_uring: treat -EAGAIN for REQ_F_NOWAIT as final for io-wq
io_uring: don't audit the capability check in io_uring_create()
Linus Torvalds [Sat, 22 Jul 2023 17:28:22 +0000 (10:28 -0700)]
Merge tag 'devicetree-fixes-for-6.5-1' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix moortec,mr75203 schema usage of 'multipleOf' keyword
- Fix regression in systems depending on "of-display" device name
- Build fix for s390 with CONFIG_PCI=n and OF_EARLY_FLATTREE=y
- Drop two obsolete serial .txt bindings
* tag 'devicetree-fixes-for-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: serial: Remove obsolete nxp,lpc1850-uart.txt
dt-bindings: serial: Remove obsolete cavium-uart.txt
dt-bindings: hwmon: moortec,mr75203: fix multipleOf for coefficients
of: Preserve "of-display" device name for compatibility
of: make OF_EARLY_FLATTREE depend on HAS_IOMEM
Linus Torvalds [Sat, 22 Jul 2023 17:20:56 +0000 (10:20 -0700)]
Merge tag 'regmap-fix-v6.5-rc2' of git://git./linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"Three fixes here:
- The issues with accounting for register and padding length on raw
buses turn out to be quite widespread in custom buses.
In order to avoid disturbing anything drop the initial fixes and
fall back to a point fix in the SMBus code where the issue was
originally noticed, a more substantial refactoring of the API which
ensures that all buses make the same assumptions will follow.
- The generic regcache code had been forcing on async I/O which did
not work with the new maple tree sync code when used with SPI.
Since that was mainly for the rbtree cache and the assumptions
about hardware that drove the choice are probably not true any more
fix this by pushing the enablement of async down into the rbtree
code.
This probably also makes cache syncs for systems faster though it's
not the point.
- The test code was triggering use of the rbtree and maple tree
caches with dynamic allocation of nodes since all the testing is
with RAM backed caches with no I/O performance issues.
Just disable the locking in the tests to avoid triggering warnings
when allocation debugging is turned on, it's not really what's
being tested"
* tag 'regmap-fix-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Disable locking for RBTREE and MAPLE unit tests
regcache: Push async I/O request down into the rbtree cache
regmap: Account for register length in SMBus I/O limits
regmap: Drop initial version of maximum transfer length fixes
Linus Torvalds [Sat, 22 Jul 2023 17:14:04 +0000 (10:14 -0700)]
Merge tag 'gpio-fixes-for-v6.5-rc3' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix initial value handling for output-only pins in gpio-tps68470
- fix two resource leaks in gpio-mvebu
* tag 'gpio-fixes-for-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mvebu: fix irq domain leak
gpio: mvebu: Make use of devm_pwmchip_add
gpio: tps68470: Make tps68470_gpio_output() always set the initial value
Rob Herring [Fri, 7 Jul 2023 22:16:06 +0000 (16:16 -0600)]
dt-bindings: serial: Remove obsolete nxp,lpc1850-uart.txt
nxp,lpc1850-uart.txt binding is already covered by 8250.yaml, so remove
it.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230707221607.1064888-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Fri, 7 Jul 2023 22:16:02 +0000 (16:16 -0600)]
dt-bindings: serial: Remove obsolete cavium-uart.txt
cavium-uart.txt binding is already covered by 8250.yaml, so remove it.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230707221602.1063972-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Mauricio Faria de Oliveira [Thu, 20 Jul 2023 14:30:33 +0000 (11:30 -0300)]
loop: do not enforce max_loop hard limit by (new) default
Problem:
The max_loop parameter is used for 2 different purposes:
1) initial number of loop devices to pre-create on init
2) maximum number of loop devices to add on access/open()
Historically, its default value (zero) caused 1) to create non-zero
number of devices (CONFIG_BLK_DEV_LOOP_MIN_COUNT), and no hard limit on
2) to add devices with autoloading.
However, the default value changed in commit
85c50197716c ("loop: Fix
the max_loop commandline argument treatment when it is set to 0") to
CONFIG_BLK_DEV_LOOP_MIN_COUNT, for max_loop=0 not to pre-create devices.
That does improve 1), but unfortunately it breaks 2), as the default
behavior changed from no-limit to hard-limit.
Example:
For example, this userspace code broke for N >= CONFIG, if the user
relied on the default value 0 for max_loop:
mknod("/dev/loopN");
open("/dev/loopN"); // now fails with ENXIO
Though affected users may "fix" it with (loop.)max_loop=0, this means to
require a kernel parameter change on stable kernel update (that commit
Fixes: an old commit in stable).
Solution:
The original semantics for the default value in 2) can be applied if the
parameter is not set (ie, default behavior).
This still keeps the intended function in 1) and 2) if set, and that
commit's intended improvement in 1) if max_loop=0.
Before
85c50197716c:
- default: 1) CONFIG devices 2) no limit
- max_loop=0: 1) CONFIG devices 2) no limit
- max_loop=X: 1) X devices 2) X limit
After
85c50197716c:
- default: 1) CONFIG devices 2) CONFIG limit (*)
- max_loop=0: 1) 0 devices (*) 2) no limit
- max_loop=X: 1) X devices 2) X limit
This commit:
- default: 1) CONFIG devices 2) no limit (*)
- max_loop=0: 1) 0 devices 2) no limit
- max_loop=X: 1) X devices 2) X limit
Future:
The issue/regression from that commit only affects code under the
CONFIG_BLOCK_LEGACY_AUTOLOAD deprecation guard, thus the fix too is
contained under it.
Once that deprecated functionality/code is removed, the purpose 2) of
max_loop (hard limit) is no longer in use, so the module parameter
description can be changed then.
Tests:
Linux 6.4-rc7
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
- default (original)
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
open: /dev/loop8: No such device or address
- default (patched)
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
#
- max_loop=0 (original & patched):
# ls -1 /dev/loop*
/dev/loop-control
# ./test-loop
#
- max_loop=8 (original & patched):
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
open: /dev/loop8: No such device or address
- max_loop=0 (patched; CONFIG_BLOCK_LEGACY_AUTOLOAD is not set)
# ls -1 /dev/loop*
/dev/loop-control
# ./test-loop
open: /dev/loop8: No such device or address
Fixes:
85c50197716c ("loop: Fix the max_loop commandline argument treatment when it is set to 0")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230720143033.841001-3-mfo@canonical.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mauricio Faria de Oliveira [Thu, 20 Jul 2023 14:30:32 +0000 (11:30 -0300)]
loop: deprecate autoloading callback loop_probe()
The 'probe' callback in __register_blkdev() is only used under the
CONFIG_BLOCK_LEGACY_AUTOLOAD deprecation guard.
The loop_probe() function is only used for that callback, so guard it
too, accordingly.
See commit
fbdee71bb5d8 ("block: deprecate autoloading based on dev_t").
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230720143033.841001-2-mfo@canonical.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Jeffery [Fri, 21 Jul 2023 09:57:15 +0000 (17:57 +0800)]
sbitmap: fix batching wakeup
Current code supposes that it is enough to provide forward progress by
just waking up one wait queue after one completion batch is done.
Unfortunately this way isn't enough, cause waiter can be added to wait
queue just after it is woken up.
Follows one example(64 depth, wake_batch is 8)
1) all 64 tags are active
2) in each wait queue, there is only one single waiter
3) each time one completion batch(8 completions) wakes up just one
waiter in each wait queue, then immediately one new sleeper is added
to this wait queue
4) after 64 completions, 8 waiters are wakeup, and there are still 8
waiters in each wait queue
5) after another 8 active tags are completed, only one waiter can be
wakeup, and the other 7 can't be waken up anymore.
Turns out it isn't easy to fix this problem, so simply wakeup enough
waiters for single batch.
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20230721095715.232728-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 21 Jul 2023 17:24:21 +0000 (10:24 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I've picked up a handful of arm64 fixes while Catalin's been away, so
here they are. Below is the usual summary, but we have basically have
two cleanups, a fix for an SME crash and a fix for hibernation:
- Fix saving of SME state after SVE vector length is changed
- Fix sparse warnings for missing vDSO function prototypes
- Fix hibernation resume path when kfence is enabled
- Fix field names for the HFGxTR_EL2 register"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes
arm64: vdso: Clear common make C=2 warnings
arm64: mm: Make hibernation aware of KFENCE
arm64: Fix HFGxTR_EL2 field naming
Linus Torvalds [Fri, 21 Jul 2023 17:16:20 +0000 (10:16 -0700)]
Merge tag 'pm-6.5-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Revert three recent intel_idle commits that introduced a functional
issue, included a coding mistake and have been questioned at the
design level"
* tag 'pm-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "intel_idle: Add support for using intel_idle in a VM guest using just hlt"
Revert "intel_idle: Add a "Long HLT" C1 state for the VM guest mode"
Revert "intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()"
Linus Torvalds [Fri, 21 Jul 2023 17:10:18 +0000 (10:10 -0700)]
Merge tag 'sound-6.5-rc3' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A pile of fixes that have been gathered since the previous pull. Most
of changes are device-specific, and nothing looks too scary.
- A memory leak fix in ALSA sequencer code in 6.5-rc
- Many fixes for ASoC Qualcomm CODEC drivers, covering SoundWire
probe problems
- A series of ASoC AMD fixes
- A few fixes and cleanups of selftest stuff
- HD-audio codec fixes and quirks for Clevo, HP, Lenovo, Dell"
* tag 'sound-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (52 commits)
ALSA: hda/realtek: Add support for DELL Oasis 13/14/16 laptops
ALSA: hda/realtek: Fix generic fixup definition for cs35l41 amp
ALSA: hda/realtek: Enable Mute LED on HP Laptop 15s-eq2xxx
selftests: ALSA: Add test-pcmtest-driver to .gitignore
ALSA: hda/realtek: Add quirk for Clevo NS70AU
ASoC: fsl_sai: Disable bit clock with transmitter
ALSA: seq: Fix memory leak at error path in snd_seq_create_port()
ASoC: SOF: ipc3-dtrace: uninitialized data in dfsentry_trace_filter_write()
ASoC: cs42l51: fix driver to properly autoload with automatic module loading
MAINTAINERS: Redo addition of ssm3515 to APPLE SOUND
ASoC: rt5640: Fix the issue of speaker noise
ALSA: hda/realtek - remove 3k pull low procedure
selftests: ALSA: Fix fclose on an already fclosed file pointer
ALSA: pcmtest: Don't use static storage to track per device data
ALSA: pcmtest: Convert to platform remove callback returning void
ASoC: dt-bindings: audio-graph-card2: Drop incomplete example
ASoC: dt-bindings: Update maintainer email id
ASoC: amd: ps: Fix extraneous error messages
ASoC: fsl_sai: Revert "ASoC: fsl_sai: Enable MCTL_MCLK_EN bit for master mode"
ASoC: codecs: SND_SOC_WCD934X should select REGMAP_IRQ
...
Linus Torvalds [Fri, 21 Jul 2023 17:00:09 +0000 (10:00 -0700)]
Merge tag 'fbdev-for-6.5-rc3' of git://git./linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
"Just the usual bunch of code cleanups in various drivers, this time
mostly in vgacon and imxfb:
- Code cleanup in vgacon (Jiri Slaby)
- Explicitly include correct DT includes (Rob Herring)
- imxfb code cleanup (Yangtao Li, Martin Kaiser)
- kyrofb: make arrays const and smaller (Colin Ian King)
- ep93xx-fb: return value check fix (Yuanjun Gong)
- au1200fb: add missing IRQ check (Zhang Shurong)"
* tag 'fbdev-for-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Explicitly include correct DT includes
fbdev: ep93xx-fb: fix return value check in ep93xxfb_probe
fbdev: au1200fb: Fix missing IRQ check in au1200fb_drv_probe
fbdev: kyro: make some const read-only arrays static and reduce type size
fbcon: remove unused display (p) from fbcon_redraw()
sticon: make sticon_set_def_font() void and remove op parameter
vgacon: cache vc_cell_height in vgacon_cursor()
vgacon: let vgacon_doresize() return void
vgacon: remove unused xpos from vgacon_set_cursor_size()
vgacon: remove unneeded forward declarations
vgacon: switch vgacon_scrolldelta() and vgacon_restore_screen()
fbdev: imxfb: remove unneeded labels
fbdev: imxfb: Convert to devm_platform_ioremap_resource()
fbdev: imxfb: Convert to devm_kmalloc_array()
fbdev: imxfb: Removed unneeded release_mem_region
fbdev: imxfb: switch to DEFINE_SIMPLE_DEV_PM_OPS
fbdev: imxfb: warn about invalid left/right margin
Daniel Vetter [Fri, 21 Jul 2023 13:58:38 +0000 (15:58 +0200)]
drm/atomic: Fix potential use-after-free in nonblocking commits
This requires a bit of background. Properly done a modeset driver's
unload/remove sequence should be
drm_dev_unplug();
drm_atomic_helper_shutdown();
drm_dev_put();
The trouble is that the drm_dev_unplugged() checks are by design racy,
they do not synchronize against all outstanding ioctl. This is because
those ioctl could block forever (both for modeset and for driver
specific ioctls), leading to deadlocks in hotunplug. Instead the code
sections that touch the hardware need to be annotated with
drm_dev_enter/exit, to avoid accessing hardware resources after the
unload/remove has finished.
To avoid use-after-free issues all the involved userspace visible
objects are supposed to hold a reference on the underlying drm_device,
like drm_file does.
The issue now is that we missed one, the atomic modeset ioctl can be run
in a nonblocking fashion, and in that case it cannot rely on the implied
drm_device reference provided by the ioctl calling context. This can
result in a use-after-free if an nonblocking atomic commit is carefully
raced against a driver unload.
Fix this by unconditionally grabbing a drm_device reference for any
drm_atomic_state structures. Strictly speaking this isn't required for
blocking commits and TEST_ONLY calls, but it's the simpler approach.
Thanks to shanzhulig for the initial idea of grabbing an unconditional
reference, I just added comments, a condensed commit message and fixed a
minor potential issue in where exactly we drop the final reference.
Reported-by: shanzhulig <shanzhulig@gmail.com>
Suggested-by: shanzhulig <shanzhulig@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Helge Deller [Fri, 21 Jul 2023 15:24:32 +0000 (17:24 +0200)]
ia64: mmap: Consider pgoff when searching for free mapping
IA64 is the only architecture which does not consider the pgoff value when
searching for a possible free memory region with vm_unmapped_area().
Adding this seems to have no negative side effect on IA64, so add it now
to make IA64 consistent with all other architectures.
Cc: stable@vger.kernel.org # 6.4
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-ia64@vger.kernel.org
Link: https://lore.kernel.org/r/20230721152432.196382-3-deller@gmx.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Helge Deller [Fri, 21 Jul 2023 15:24:31 +0000 (17:24 +0200)]
io_uring: Fix io_uring mmap() by using architecture-provided get_unmapped_area()
The io_uring testcase is broken on IA-64 since commit
d808459b2e31
("io_uring: Adjust mapping wrt architecture aliasing requirements").
The reason is, that this commit introduced an own architecture
independend get_unmapped_area() search algorithm which finds on IA-64 a
memory region which is outside of the regular memory region used for
shared userspace mappings and which can't be used on that platform
due to aliasing.
To avoid similar problems on IA-64 and other platforms in the future,
it's better to switch back to the architecture-provided
get_unmapped_area() function and adjust the needed input parameters
before the call. Beside fixing the issue, the function now becomes
easier to understand and maintain.
This patch has been successfully tested with the io_uring testcase on
physical x86-64, ppc64le, IA-64 and PA-RISC machines. On PA-RISC the LTP
mmmap testcases did not report any regressions.
Cc: stable@vger.kernel.org # 6.4
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Fixes:
d808459b2e31 ("io_uring: Adjust mapping wrt architecture aliasing requirements")
Link: https://lore.kernel.org/r/20230721152432.196382-2-deller@gmx.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark Brown [Thu, 20 Jul 2023 18:38:58 +0000 (19:38 +0100)]
arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes
When we reconfigure the SVE vector length we discard the backing storage
for the SVE vectors and then reallocate on next SVE use, leaving the SME
specific state alone. This means that we do not enable SME traps if they
were already disabled. That means that userspace code can enter streaming
mode without trapping, putting the task in a state where if we try to save
the state of the task we will fault.
Since the ABI does not specify that changing the SVE vector length disturbs
SME state, and since SVE code may not be aware of SME code in the process,
we shouldn't simply discard any ZA state. Instead immediately reallocate
the storage for SVE, and disable SME if we change the SVE vector length
while there is no SME state active.
Disabling SME traps on SVE vector length changes would make the overall
code more complex since we would have a state where we have valid SME state
stored but might get a SME trap.
Fixes:
9e4ab6c89109 ("arm64/sme: Implement vector length configuration prctl()s")
Reported-by: David Spickett <David.Spickett@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-1-8eea06b82d57@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Linus Torvalds [Fri, 21 Jul 2023 03:35:38 +0000 (20:35 -0700)]
Merge tag 'drm-fixes-2023-07-21' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Mostly amdgpu fixes, a couple of i915 fixes, some nouveau and then a
few misc accel and other fixes.
client:
- memory leak fix
dma-buf:
- memory leak fix
qaic:
- bound check fixes
- map_user_pages leak
- int overflow fixes
habanalabs:
- debugfs stub helper
nouveau:
- aux event slot fixes
- anx9805 cards fixes
i915:
- Add sentinel to xehp_oa_b_counters
- Revert "drm/i915: use localized __diag_ignore_all() instead of per
file"
amdgpu:
- More PCIe DPM fixes for Intel platforms
- DCN3.0.1 fixes
- Virtual display timer fix
- Async flip fix
- SMU13 clock reporting fixes
- Add missing PSP firmware declaration
- DP MST fix
- DCN3.1.x fixes
- Slab out of bounds fix"
* tag 'drm-fixes-2023-07-21' of git://anongit.freedesktop.org/drm/drm: (31 commits)
accel/habanalabs: add more debugfs stub helpers
drm/nouveau/kms/nv50-: init hpd_irq_lock for PIOR DP
drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts
drm/nouveau/i2c: fix number of aux event slots
drm/amdgpu: use a macro to define no xcp partition case
drm/amdgpu/vm: use the same xcp_id from root PD
drm/amdgpu: fix slab-out-of-bounds issue in amdgpu_vm_pt_create
drm/amdgpu: Allocate root PD on correct partition
drm/amd/display: Keep PHY active for DP displays on DCN31
drm/amd/display: Prevent vtotal from being set to 0
drm/amd/display: Disable MPC split by default on special asic
drm/amd/display: check TG is non-null before checking if enabled
drm/amd/display: Add polling method to handle MST reply packet
drm/amd/display: Clean up errors & warnings in amdgpu_dm.c
drm/amdgpu: Allow the initramfs generator to include psp_13_0_6_ta
drm/amdgpu/pm: make mclk consistent for smu 13.0.7
drm/amdgpu/pm: make gfxclock consistent for sienna cichlid
drm/amd/display: only accept async flips for fast updates
drm/amdgpu/vkms: relax timer deactivation by hrtimer_try_to_cancel
drm/amd/display: add DCN301 specific logic for OTG programming
...
Dave Airlie [Fri, 21 Jul 2023 02:16:41 +0000 (12:16 +1000)]
Merge tag 'amd-drm-fixes-6.5-2023-07-20' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.5-2023-07-20:
amdgpu:
- More PCIe DPM fixes for Intel platforms
- DCN3.0.1 fixes
- Virtual display timer fix
- Async flip fix
- SMU13 clock reporting fixes
- Add missing PSP firmware declaration
- DP MST fix
- DCN3.1.x fixes
- Slab out of bounds fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720133456.7826-1-alexander.deucher@amd.com
Dave Airlie [Fri, 21 Jul 2023 02:15:09 +0000 (12:15 +1000)]
Merge tag 'drm-intel-fixes-2023-07-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Add sentinel to xehp_oa_b_counters [perf] (Andrzej Hajda)
- Revert "drm/i915: use localized __diag_ignore_all() instead of per file" (Jani Nikula)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZLjuwhLhwab5B7RY@tursulin-desk
Dave Airlie [Fri, 21 Jul 2023 02:02:31 +0000 (12:02 +1000)]
Merge tag 'drm-misc-fixes-2023-07-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Memory leak fixes in drm/client, memory access/leak fixes for
accel/qaic, another leak fix in dma-buf and three nouveau fixes around
hotplugging.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fmj5nok7zggux2lcpdtls2iknweba54wfc6o4zxq6i6s3dgi2r@7z3eawwhyhen
Linus Torvalds [Fri, 21 Jul 2023 02:10:50 +0000 (19:10 -0700)]
Merge tag 'ata-6.5-rc3' of git://git./linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
- Add missing MODULE_DESCRIPTION() in the many of the protocol modules
for the pata_parport driver to avoid compilation warnings with "make
W=1".
* tag 'ata-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_parport: Add missing protocol modules description
Linus Torvalds [Thu, 20 Jul 2023 21:46:39 +0000 (14:46 -0700)]
Merge tag 'net-6.5-rc3' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF, netfilter, bluetooth and CAN.
Current release - regressions:
- eth: r8169: multiple fixes for PCIe ASPM-related problems
- vrf: fix RCU lockdep splat in output path
Previous releases - regressions:
- gso: fall back to SW segmenting with GSO_UDP_L4 dodgy bit set
- dsa: mv88e6xxx: do a final check before timing out when polling
- nf_tables: fix sleep in atomic in nft_chain_validate
Previous releases - always broken:
- sched: fix undoing tcf_bind_filter() in multiple classifiers
- bpf, arm64: fix BTI type used for freplace attached functions
- can: gs_usb: fix time stamp counter initialization
- nft_set_pipapo: fix improper element removal (leading to UAF)
Misc:
- net: support STP on bridge in non-root netns, STP prevents packet
loops so not supporting it results in freezing systems of
unsuspecting users, and in turn very upset noises being made
- fix kdoc warnings
- annotate various bits of TCP state to prevent data races"
* tag 'net-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: phy: prevent stale pointer dereference in phy_init()
tcp: annotate data-races around fastopenq.max_qlen
tcp: annotate data-races around icsk->icsk_user_timeout
tcp: annotate data-races around tp->notsent_lowat
tcp: annotate data-races around rskq_defer_accept
tcp: annotate data-races around tp->linger2
tcp: annotate data-races around icsk->icsk_syn_retries
tcp: annotate data-races around tp->keepalive_probes
tcp: annotate data-races around tp->keepalive_intvl
tcp: annotate data-races around tp->keepalive_time
tcp: annotate data-races around tp->tsoffset
tcp: annotate data-races around tp->tcp_tx_delay
Bluetooth: MGMT: Use correct address for memcpy()
Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
Bluetooth: SCO: fix sco_conn related locking and validity issues
Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
Bluetooth: coredump: fix building with coredump disabled
Bluetooth: ISO: fix iso_conn related locking and validity issues
Bluetooth: hci_event: call disconnect callback before deleting conn
...
Chengming Zhou [Thu, 20 Jul 2023 12:14:41 +0000 (20:14 +0800)]
blk-iocost: skip empty flush bio in iocost
The flush bio may have data, may have no data (empty flush), we couldn't
calculate cost for empty flush bio. So we'd better just skip it for now.
Another side effect is that empty flush bio's bio_end_sector() is 0, cause
iocg->cursor reset to 0, may break the cost calculation of other bios.
This isn't good enough, since flush bio still consume the device bandwidth,
but flush request is special, can be merged randomly in the flush state
machine, we don't know how to calculate cost for it for now.
Its completion time also has flaws, which may include the pre-flush or
post-flush completion time, but I don't know if we need to fix that and
how to fix it.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230720121441.1408522-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jakub Kicinski [Thu, 20 Jul 2023 19:57:55 +0000 (12:57 -0700)]
Merge tag 'for-net-2023-07-20' of git://git./linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix building with coredump disabled
- Fix use-after-free in hci_remove_adv_monitor
- Use RCU for hci_conn_params and iterate safely in hci_sync
- Fix locking issues on ISO and SCO
- Fix bluetooth on Intel Macbook 2014
* tag 'for-net-2023-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Use correct address for memcpy()
Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
Bluetooth: SCO: fix sco_conn related locking and validity issues
Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
Bluetooth: coredump: fix building with coredump disabled
Bluetooth: ISO: fix iso_conn related locking and validity issues
Bluetooth: hci_event: call disconnect callback before deleting conn
Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync
====================
Link: https://lore.kernel.org/r/20230720190201.446469-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 20 Jul 2023 19:54:21 +0000 (12:54 -0700)]
Merge tag 'nf-23-07-20' of https://git./linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
Netfilter fixes for net:
The following patchset contains Netfilter fixes for net:
1. Fix spurious -EEXIST error from userspace due to
padding holes, this was broken since 4.9 days
when 'ignore duplicate entries on insert' feature was
added.
2. Fix a sched-while-atomic bug, present since 5.19.
3. Properly remove elements if they lack an "end range".
nft userspace always sets an end range attribute, even
when its the same as the start, but the abi doesn't
have such a restriction. Always broken since it was
added in 5.6, all three from myself.
4 + 5: Bound chain needs to be skipped in netns release
and on rule flush paths, from Pablo Neira.
* tag 'nf-23-07-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: skip bound chain on rule flush
netfilter: nf_tables: skip bound chain in netns release path
netfilter: nft_set_pipapo: fix improper element removal
netfilter: nf_tables: can't schedule in nft_chain_validate
netfilter: nf_tables: fix spurious set element insertion failure
====================
Link: https://lore.kernel.org/r/20230720165143.30208-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Thu, 20 Jul 2023 00:02:31 +0000 (03:02 +0300)]
net: phy: prevent stale pointer dereference in phy_init()
mdio_bus_init() and phy_driver_register() both have error paths, and if
those are ever hit, ethtool will have a stale pointer to the
phy_ethtool_phy_ops stub structure, which references memory from a
module that failed to load (phylib).
It is probably hard to force an error in this code path even manually,
but the error teardown path of phy_init() should be the same as
phy_exit(), which is now simply not the case.
Fixes:
55d8f053ce1b ("net: phy: Register ethtool PHY operations")
Link: https://lore.kernel.org/netdev/ZLaiJ4G6TaJYGJyU@shell.armlinux.org.uk/
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230720000231.1939689-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 20 Jul 2023 19:34:24 +0000 (12:34 -0700)]
Merge branch 'tcp-add-missing-annotations'
Eric Dumazet says:
====================
tcp: add missing annotations
This series was inspired by one syzbot (KCSAN) report.
do_tcp_getsockopt() does not lock the socket, we need to
annotate most of the reads there (and other places as well).
This is a first round, another series will come later.
====================
Link: https://lore.kernel.org/r/20230719212857.3943972-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 19 Jul 2023 21:28:57 +0000 (21:28 +0000)]
tcp: annotate data-races around fastopenq.max_qlen
This field can be read locklessly.
Fixes:
1536e2857bd3 ("tcp: Add a TCP_FASTOPEN socket option to get a max backlog on its listner")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 19 Jul 2023 21:28:56 +0000 (21:28 +0000)]
tcp: annotate data-races around icsk->icsk_user_timeout
This field can be read locklessly from do_tcp_getsockopt()
Fixes:
dca43c75e7e5 ("tcp: Add TCP_USER_TIMEOUT socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 19 Jul 2023 21:28:55 +0000 (21:28 +0000)]
tcp: annotate data-races around tp->notsent_lowat
tp->notsent_lowat can be read locklessly from do_tcp_getsockopt()
and tcp_poll().
Fixes:
c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 19 Jul 2023 21:28:54 +0000 (21:28 +0000)]
tcp: annotate data-races around rskq_defer_accept
do_tcp_getsockopt() reads rskq_defer_accept while another cpu
might change its value.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 19 Jul 2023 21:28:53 +0000 (21:28 +0000)]
tcp: annotate data-races around tp->linger2
do_tcp_getsockopt() reads tp->linger2 while another cpu
might change its value.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 19 Jul 2023 21:28:52 +0000 (21:28 +0000)]
tcp: annotate data-races around icsk->icsk_syn_retries
do_tcp_getsockopt() and reqsk_timer_handler() read
icsk->icsk_syn_retries while another cpu might change its value.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 19 Jul 2023 21:28:51 +0000 (21:28 +0000)]
tcp: annotate data-races around tp->keepalive_probes
do_tcp_getsockopt() reads tp->keepalive_probes while another cpu
might change its value.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 19 Jul 2023 21:28:50 +0000 (21:28 +0000)]
tcp: annotate data-races around tp->keepalive_intvl
do_tcp_getsockopt() reads tp->keepalive_intvl while another cpu
might change its value.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 19 Jul 2023 21:28:49 +0000 (21:28 +0000)]
tcp: annotate data-races around tp->keepalive_time
do_tcp_getsockopt() reads tp->keepalive_time while another cpu
might change its value.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 19 Jul 2023 21:28:48 +0000 (21:28 +0000)]
tcp: annotate data-races around tp->tsoffset
do_tcp_getsockopt() reads tp->tsoffset while another cpu
might change its value.
Fixes:
93be6ce0e91b ("tcp: set and get per-socket timestamp")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 19 Jul 2023 21:28:47 +0000 (21:28 +0000)]
tcp: annotate data-races around tp->tcp_tx_delay
do_tcp_getsockopt() reads tp->tcp_tx_delay while another cpu
might change its value.
Fixes:
a842fe1425cb ("tcp: add optional per socket transmit delay")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chengming Zhou [Thu, 20 Jul 2023 09:55:12 +0000 (17:55 +0800)]
blk-mq: delete dead struct blk_mq_hw_ctx->queued field
This counter is not used anywhere, so delete it.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230720095512.1403123-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Thu, 20 Jul 2023 19:16:53 +0000 (13:16 -0600)]
io_uring: treat -EAGAIN for REQ_F_NOWAIT as final for io-wq
io-wq assumes that an issue is blocking, but it may not be if the
request type has asked for a non-blocking attempt. If we get
-EAGAIN for that case, then we need to treat it as a final result
and not retry or arm poll for it.
Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/issues/897
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Andy Shevchenko [Mon, 17 Jul 2023 09:32:14 +0000 (12:32 +0300)]
Bluetooth: MGMT: Use correct address for memcpy()
In function ‘fortify_memcpy_chk’,
inlined from ‘get_conn_info_complete’ at net/bluetooth/mgmt.c:7281:2:
include/linux/fortify-string.h:592:25: error: call to
‘__read_overflow2_field’ declared with attribute warning: detected read
beyond size of field (2nd parameter); maybe use struct_group()?
[-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
This is due to the wrong member is used for memcpy(). Use correct one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tomasz Moń [Thu, 13 Jul 2023 10:25:14 +0000 (12:25 +0200)]
Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
Commit
c13380a55522 ("Bluetooth: btusb: Do not require hardcoded
interface numbers") inadvertedly broke bluetooth on Intel Macbook 2014.
The intention was to keep behavior intact when BTUSB_IFNUM_2 is set and
otherwise allow any interface numbers. The problem is that the new logic
condition omits the case where bInterfaceNumber is 0.
Fix BTUSB_IFNUM_2 handling by allowing both interface number 0 and 2
when the flag is set.
Fixes:
c13380a55522 ("Bluetooth: btusb: Do not require hardcoded interface numbers")
Reported-by: John Holland <johnbholland@icloud.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217651
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Tested-by: John Holland<johnbholland@icloud.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Mon, 10 Jul 2023 16:48:19 +0000 (19:48 +0300)]
Bluetooth: SCO: fix sco_conn related locking and validity issues
Operations that check/update sk_state and access conn should hold
lock_sock, otherwise they can race.
The order of taking locks is hci_dev_lock > lock_sock > sco_conn_lock,
which is how it is in connect/disconnect_cfm -> sco_conn_del ->
sco_chan_del.
Fix locking in sco_connect to take lock_sock around updating sk_state
and conn.
sco_conn_del must not occur during sco_connect, as it frees the
sco_conn. Hold hdev->lock longer to prevent that.
sco_conn_add shall return sco_conn with valid hcon. Make it so also when
reusing an old SCO connection waiting for disconnect timeout (see
__sco_sock_close where conn->hcon is set to NULL).
This should not reintroduce the issue fixed in the earlier
commit
9a8ec9e8ebb5 ("Bluetooth: SCO: Fix possible circular locking
dependency on sco_connect_cfm"), the relevant fix of releasing lock_sock
in sco_sock_connect before acquiring hdev->lock is retained.
These changes mirror similar fixes earlier in ISO sockets.
Fixes:
9a8ec9e8ebb5 ("Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Siddh Raman Pant [Tue, 11 Jul 2023 13:13:53 +0000 (18:43 +0530)]
Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
hci_connect_sco currently returns NULL when there is no link (i.e. when
hci_conn_link() returns NULL).
sco_connect() expects an ERR_PTR in case of any error (see line 266 in
sco.c). Thus, hcon set as NULL passes through to sco_conn_add(), which
tries to get hcon->hdev, resulting in dereferencing a NULL pointer as
reported by syzkaller.
The same issue exists for iso_connect_cis() calling hci_connect_cis().
Thus, make hci_connect_sco() and hci_connect_cis() return ERR_PTR
instead of NULL.
Reported-and-tested-by: syzbot+37acd5d80d00d609d233@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=
37acd5d80d00d609d233
Fixes:
06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Douglas Anderson [Fri, 30 Jun 2023 22:33:14 +0000 (15:33 -0700)]
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
KASAN reports that there's a use-after-free in
hci_remove_adv_monitor(). Trawling through the disassembly, you can
see that the complaint is from the access in bt_dev_dbg() under the
HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because
msft_remove_monitor() can end up freeing the monitor
structure. Specifically:
hci_remove_adv_monitor() ->
msft_remove_monitor() ->
msft_remove_monitor_sync() ->
msft_le_cancel_monitor_advertisement_cb() ->
hci_free_adv_monitor()
Let's fix the problem by just stashing the relevant data when it's
still valid.
Fixes:
7cf5c2978f23 ("Bluetooth: hci_sync: Refactor remove Adv Monitor")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Arnd Bergmann [Mon, 3 Jul 2023 11:30:48 +0000 (13:30 +0200)]
Bluetooth: coredump: fix building with coredump disabled
The btmtk driver uses an IS_ENABLED() check to conditionally compile
the coredump support, but this fails to build because the hdev->dump
member is in an #ifdef:
drivers/bluetooth/btmtk.c: In function 'btmtk_process_coredump':
drivers/bluetooth/btmtk.c:386:30: error: 'struct hci_dev' has no member named 'dump'
386 | schedule_delayed_work(&hdev->dump.dump_timeout,
| ^~
The struct member doesn't really make a huge difference in the total size,
so just remove the #ifdef around it to avoid adding similar checks
around each user.
Fixes:
872f8c253cb9e ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Fixes:
9695ef876fd12 ("Bluetooth: Add support for hci devcoredump")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Sun, 18 Jun 2023 22:04:33 +0000 (01:04 +0300)]
Bluetooth: ISO: fix iso_conn related locking and validity issues
sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations
that check/update sk_state and access conn should hold lock_sock,
otherwise they can race.
The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock,
which is how it is in connect/disconnect_cfm -> iso_conn_del ->
iso_chan_del.
Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock
around updating sk_state and conn.
iso_conn_del must not occur during iso_connect_cis/bis, as it frees the
iso_conn. Hold hdev->lock longer to prevent that.
This should not reintroduce the issue fixed in commit
241f51931c35
("Bluetooth: ISO: Avoid circular locking dependency"), since the we
acquire locks in order. We retain the fix in iso_sock_connect to release
lock_sock before iso_connect_* acquires hdev->lock.
Similarly for commit
6a5ad251b7cd ("Bluetooth: ISO: Fix possible
circular locking dependency"). We retain the fix in iso_conn_ready to
not acquire iso_conn_lock before lock_sock.
iso_conn_add shall return iso_conn with valid hcon. Make it so also when
reusing an old CIS connection waiting for disconnect timeout (see
__iso_sock_close where conn->hcon is set to NULL).
Trace with iso_conn_del after iso_chan_add in iso_connect_cis:
===============================================================
iso_sock_create:771: sock
00000000be9b69b7
iso_sock_init:693: sk
000000004dff667e
iso_sock_bind:827: sk
000000004dff667e 70:1a:b8:98:ff:a2 type 1
iso_sock_setsockopt:1289: sk
000000004dff667e
iso_sock_setsockopt:1289: sk
000000004dff667e
iso_sock_setsockopt:1289: sk
000000004dff667e
iso_sock_connect:875: sk
000000004dff667e
iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da
iso_conn_add:140: hcon
000000007b65d182 conn
00000000daf8625e
__iso_chan_add:214: conn
00000000daf8625e
iso_connect_cfm:1700: hcon
000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12
iso_conn_del:187: hcon
000000007b65d182 conn
00000000daf8625e, err 16
iso_sock_clear_timer:117: sock
000000004dff667e state 3
<Note: sk_state is BT_BOUND (3), so iso_connect_cis is still
running at this point>
iso_chan_del:153: sk
000000004dff667e, conn
00000000daf8625e, err 16
hci_conn_del:1151: hci0 hcon
000000007b65d182 handle 65535
hci_conn_unlink:1102: hci0: hcon
000000007b65d182
hci_chan_list_flush:2780: hcon
000000007b65d182
iso_sock_getsockopt:1376: sk
000000004dff667e
iso_sock_getname:1070: sock
00000000be9b69b7, sk
000000004dff667e
iso_sock_getname:1070: sock
00000000be9b69b7, sk
000000004dff667e
iso_sock_getsockopt:1376: sk
000000004dff667e
iso_sock_getname:1070: sock
00000000be9b69b7, sk
000000004dff667e
iso_sock_getname:1070: sock
00000000be9b69b7, sk
000000004dff667e
iso_sock_shutdown:1434: sock
00000000be9b69b7, sk
000000004dff667e, how 1
__iso_sock_close:632: sk
000000004dff667e state 5 socket
00000000be9b69b7
<Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets
BT_CLOSED (6). Only iso_connect_cis sets it to BT_CONNECT, so it
must be that iso_chan_del occurred between iso_chan_add and end of
iso_connect_cis.>
BUG: kernel NULL pointer dereference, address:
0000000000000000
PGD
8000000006467067 P4D
8000000006467067 PUD 3f5f067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:__iso_sock_close (net/bluetooth/iso.c:664) bluetooth
===============================================================
Trace with iso_conn_del before iso_chan_add in iso_connect_cis:
===============================================================
iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
...
iso_conn_add:140: hcon
0000000093bc551f conn
00000000768ae504
hci_dev_put:1487: hci0 orig refcnt 21
hci_event_packet:7607: hci0: event 0x0e
hci_cmd_complete_evt:4231: hci0: opcode 0x2062
hci_cc_le_set_cig_params:3846: hci0: status 0x07
hci_sent_cmd_data:3107: hci0 opcode 0x2062
iso_connect_cfm:1703: hcon
0000000093bc551f bdaddr 28:3d:c2:4a:7e:da status 7
iso_conn_del:187: hcon
0000000093bc551f conn
00000000768ae504, err 12
hci_conn_del:1151: hci0 hcon
0000000093bc551f handle 65535
hci_conn_unlink:1102: hci0: hcon
0000000093bc551f
hci_chan_list_flush:2780: hcon
0000000093bc551f
__iso_chan_add:214: conn
00000000768ae504
<Note: this conn was already freed in iso_conn_del above>
iso_sock_clear_timer:117: sock
0000000098323f95 state 3
general protection fault, probably for non-canonical address 0x30b29c630930aec8: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1920 Comm: bluetoothd Tainted: G E 6.3.0-rc7+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:detach_if_pending+0x28/0xd0
Code: 90 90 0f 1f 44 00 00 48 8b 47 08 48 85 c0 0f 84 ad 00 00 00 55 89 d5 53 48 83 3f 00 48 89 fb 74 7d 66 90 48 8b 03 48 8b 53 08 <>
RSP: 0018:
ffffb90841a67d08 EFLAGS:
00010007
RAX:
0000000000000000 RBX:
ffff9141bd5061b8 RCX:
0000000000000000
RDX:
30b29c630930aec8 RSI:
ffff9141fdd21e80 RDI:
ffff9141bd5061b8
RBP:
0000000000000001 R08:
0000000000000000 R09:
ffffb90841a67b88
R10:
0000000000000003 R11:
ffffffff8613f558 R12:
ffff9141fdd21e80
R13:
0000000000000000 R14:
ffff9141b5976010 R15:
ffff914185755338
FS:
00007f45768bd840(0000) GS:
ffff9141fdd00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000619000424074 CR3:
0000000009f5e005 CR4:
0000000000170ee0
Call Trace:
<TASK>
timer_delete+0x48/0x80
try_to_grab_pending+0xdf/0x170
__cancel_work+0x37/0xb0
iso_connect_cis+0x141/0x400 [bluetooth]
===============================================================
Trace with NULL conn->hcon in state BT_CONNECT:
===============================================================
__iso_sock_close:619: sk
00000000f7c71fc5 state 1 socket
00000000d90c5fe5
...
__iso_sock_close:619: sk
00000000f7c71fc5 state 8 socket
00000000d90c5fe5
iso_chan_del:153: sk
00000000f7c71fc5, conn
0000000022c03a7e, err 104
...
iso_sock_connect:862: sk
00000000129b56c3
iso_connect_cis:348: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7d:2a
hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7d:2a
hci_dev_hold:1495: hci0 orig refcnt 19
__iso_chan_add:214: conn
0000000022c03a7e
<Note: reusing old conn>
iso_sock_clear_timer:117: sock
00000000129b56c3 state 3
...
iso_sock_ready:1485: sk
00000000129b56c3
...
iso_sock_sendmsg:1077: sock
00000000e5013966, sk
00000000129b56c3
BUG: kernel NULL pointer dereference, address:
00000000000006a8
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1403 Comm: wireplumber Tainted: G E 6.3.0-rc7+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:iso_sock_sendmsg+0x63/0x2a0 [bluetooth]
===============================================================
Fixes:
241f51931c35 ("Bluetooth: ISO: Avoid circular locking dependency")
Fixes:
6a5ad251b7cd ("Bluetooth: ISO: Fix possible circular locking dependency")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>