xfs: Fix error code in 'xfs_ioc_getbmap()'

commit 132bf6723749f7219c399831eeb286dbbb985429 upstream.

In this function, once 'buf' has been allocated, we unconditionally
return 0.
However, 'error' is set to some error codes in several error handling
paths.
Before commit 232b51948b99 ("xfs: simplify the xfs_getbmap interface")
this was not an issue because all error paths were returning directly,
but now that some cleanup at the end may be needed, we must propagate the
error code.

Fixes: 232b51948b99 ("xfs: simplify the xfs_getbmap interface")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: cancel COW blocks before swapext

commit 96987eea537d6ccd98704a71958f9ba02da80843 upstream.

We need to make sure we have no outstanding COW blocks before we swap
extents, as there is nothing preventing us from having preallocated COW
delalloc on either inode that swapext is called on.  That case can
easily be reproduced by running generic/324 in always_cow mode:

[  620.760572] XFS: Assertion failed: tip->i_delayed_blks == 0, file: fs/xfs/xfs_bmap_util.c, line: 1669
[  620.761608] ------------[ cut here ]------------
[  620.762171] kernel BUG at fs/xfs/xfs_message.c:102!
[  620.762732] invalid opcode: 0000 [#1] SMP PTI
[  620.763272] CPU: 0 PID: 24153 Comm: xfs_fsr Tainted: G        W         4.19.0-rc1+ #4182
[  620.764203] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014
[  620.765202] RIP: 0010:assfail+0x20/0x28
[  620.765646] Code: 31 ff e8 83 fc ff ff 0f 0b c3 48 89 f1 41 89 d0 48 c7 c6 48 ca 8d 82 48 89 fa 38
[  620.767758] RSP: 0018:ffffc9000898bc10 EFLAGS: 00010202
[  620.768359] RAX: 0000000000000000 RBX: ffff88012f14ba40 RCX: 0000000000000000
[  620.769174] RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffff828560d9
[  620.769982] RBP: ffff88012f14b300 R08: 0000000000000000 R09: 0000000000000000
[  620.770788] R10: 000000000000000a R11: f000000000000000 R12: ffffc9000898bc98
[  620.771638] R13: ffffc9000898bc9c R14: ffff880130b5e2b8 R15: ffff88012a1fa2a8
[  620.772504] FS:  00007fdc36e0fbc0(0000) GS:ffff88013ba00000(0000) knlGS:0000000000000000
[  620.773475] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  620.774168] CR2: 00007fdc3604d000 CR3: 0000000132afc000 CR4: 00000000000006f0
[  620.774978] Call Trace:
[  620.775274]  xfs_swap_extent_forks+0x2a0/0x2e0
[  620.775792]  xfs_swap_extents+0x38b/0xab0
[  620.776256]  xfs_ioc_swapext+0x121/0x140
[  620.776709]  xfs_file_ioctl+0x328/0xc90
[  620.777154]  ? rcu_read_lock_sched_held+0x50/0x60
[  620.777694]  ? xfs_iunlock+0x233/0x260
[  620.778127]  ? xfs_setattr_nonsize+0x3be/0x6a0
[  620.778647]  do_vfs_ioctl+0x9d/0x680
[  620.779071]  ? ksys_fchown+0x47/0x80
[  620.779552]  ksys_ioctl+0x35/0x70
[  620.780040]  __x64_sys_ioctl+0x11/0x20
[  620.780530]  do_syscall_64+0x4b/0x190
[  620.780927]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  620.781467] RIP: 0033:0x7fdc364d0f07
[  620.781900] Code: b3 66 90 48 8b 05 81 5f 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 28
[  620.784044] RSP: 002b:00007ffe2a766038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[  620.784896] RAX: ffffffffffffffda RBX: 0000000000000025 RCX: 00007fdc364d0f07
[  620.785667] RDX: 0000560296ca2fc0 RSI: 00000000c0c0586d RDI: 0000000000000005
[  620.786398] RBP: 0000000000000025 R08: 0000000000001200 R09: 0000000000000000
[  620.787283] R10: 0000000000000432 R11: 0000000000000246 R12: 0000000000000005
[  620.788051] R13: 0000000000000000 R14: 0000000000001000 R15: 0000000000000006
[  620.788927] Modules linked in:
[  620.789340] ---[ end trace 9503b7417ffdbdb0 ]---
[  620.790065] RIP: 0010:assfail+0x20/0x28
[  620.790642] Code: 31 ff e8 83 fc ff ff 0f 0b c3 48 89 f1 41 89 d0 48 c7 c6 48 ca 8d 82 48 89 fa 38
[  620.793038] RSP: 0018:ffffc9000898bc10 EFLAGS: 00010202
[  620.793609] RAX: 0000000000000000 RBX: ffff88012f14ba40 RCX: 0000000000000000
[  620.794317] RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffff828560d9
[  620.795025] RBP: ffff88012f14b300 R08: 0000000000000000 R09: 0000000000000000
[  620.795778] R10: 000000000000000a R11: f000000000000000 R12: ffffc9000898bc98
[  620.796675] R13: ffffc9000898bc9c R14: ffff880130b5e2b8 R15: ffff88012a1fa2a8
[  620.797782] FS:  00007fdc36e0fbc0(0000) GS:ffff88013ba00000(0000) knlGS:0000000000000000
[  620.798908] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  620.799594] CR2: 00007fdc3604d000 CR3: 0000000132afc000 CR4: 00000000000006f0
[  620.800424] Kernel panic - not syncing: Fatal exception
[  620.801191] Kernel Offset: disabled
[  620.801597] ---[ end Kernel panic - not syncing: Fatal exception ]---

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: Fix xqmstats offsets in /proc/fs/xfs/xqmstat

commit 41657e5507b13e963be906d5d874f4f02374fd5c upstream.

The addition of FIBT, RMAP and REFCOUNT changed the offsets into
__xfssats structure.

This caused xqmstat_proc_show() to display garbage data via
/proc/fs/xfs/xqmstat, once it relies on the offsets marked via macros.

Fix it.

Fixes: 00f4e4f9 xfs: add rmap btree stats infrastructure
Fixes: aafc3c24 xfs: support the XFS_BTNUM_FINOBT free inode btree type
Fixes: 46eeb521 xfs: introduce refcount btree definitions
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/gdb: fix lx-version string output

[ Upstream commit b058809bfc8faeb7b7cae047666e23375a060059 ]

A bug is present in GDB which causes early string termination when
parsing variables.  This has been reported [0], but we should ensure
that we can support at least basic printing of the core kernel strings.

For current gdb version (has been tested with 7.3 and 8.1), 'lx-version'
only prints one character.

  (gdb) lx-version
  L(gdb)

This can be fixed by casting 'linux_banner' as (char *).

  (gdb) lx-version
  Linux version 4.19.0-rc1+ (changbin@acer) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21 SMP Sat Sep 1 21:43:30 CST 2018

[0] https://sourceware.org/bugzilla/show_bug.cgi?id=20077

[kbingham@kernel.org: add detail to commit message]
Link: http://lkml.kernel.org/r/20181111162035.8356-1-kieran.bingham@ideasonboard.com
Fixes: 2d061d999424 ("scripts/gdb: add version command")
Signed-off-by: Du Changbin <changbin.du@gmail.com>
Signed-off-by: Kieran Bingham <kbingham@kernel.org>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel/kcov.c: mark write_comp_data() as notrace

[ Upstream commit 634724431607f6f46c495dfef801a1c8b44a96d9 ]

Since __sanitizer_cov_trace_const_cmp4 is marked as notrace, the
function called from __sanitizer_cov_trace_const_cmp4 shouldn't be
traceable either.  ftrace_graph_caller() gets called every time func
write_comp_data() gets called if it isn't marked 'notrace'.  This is the
backtrace from gdb:

 #0  ftrace_graph_caller () at ../arch/arm64/kernel/entry-ftrace.S:179
 #1  0xffffff8010201920 in ftrace_caller () at ../arch/arm64/kernel/entry-ftrace.S:151
 #2  0xffffff8010439714 in write_comp_data (type=5, arg1=0, arg2=0, ip=18446743524224276596) at ../kernel/kcov.c:116
 #3  0xffffff8010439894 in __sanitizer_cov_trace_const_cmp4 (arg1=<optimized out>, arg2=<optimized out>) at ../kernel/kcov.c:188
 #4  0xffffff8010201874 in prepare_ftrace_return (self_addr=18446743524226602768, parent=0xffffff801014b918, frame_pointer=18446743524223531344) at ./include/generated/atomic-instrumented.h:27
 #5  0xffffff801020194c in ftrace_graph_caller () at ../arch/arm64/kernel/entry-ftrace.S:182

Rework so that write_comp_data() that are called from
__sanitizer_cov_trace_*_cmp*() are marked as 'notrace'.

Commit 903e8ff86753 ("kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace")
missed to mark write_comp_data() as 'notrace'. When that patch was
created gcc-7 was used. In lib/Kconfig.debug
config KCOV_ENABLE_COMPARISONS
depends on $(cc-option,-fsanitize-coverage=trace-cmp)

That code path isn't hit with gcc-7. However, it were that with gcc-8.

Link: http://lkml.kernel.org/r/20181206143011.23719-1-anders.roxell@linaro.org
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

exec: load_script: don't blindly truncate shebang string

[ Upstream commit 8099b047ecc431518b9bb6bdbba3549bbecdc343 ]

load_script() simply truncates bprm->buf and this is very wrong if the
length of shebang string exceeds BINPRM_BUF_SIZE-2.  This can silently
truncate i_arg or (worse) we can execute the wrong binary if buf[2:126]
happens to be the valid executable path.

Change load_script() to return ENOEXEC if it can't find '\n' or zero in
bprm->buf.  Note that '\0' can come from either
prepare_binprm()->memset() or from kernel_read(), we do not care.

Link: http://lkml.kernel.org/r/20181112160931.GA28463@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Ben Woodard <woodard@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/epoll: drop ovflist branch prediction

[ Upstream commit 76699a67f3041ff4c7af6d6ee9be2bfbf1ffb671 ]

The ep->ovflist is a secondary ready-list to temporarily store events
that might occur when doing sproc without holding the ep->wq.lock.  This
accounts for every time we check for ready events and also send events
back to userspace; both callbacks, particularly the latter because of
copy_to_user, can account for a non-trivial time.

As such, the unlikely() check to see if the pointer is being used, seems
both misleading and sub-optimal.  In fact, we go to an awful lot of
trouble to sync both lists, and populating the ovflist is far from an
uncommon scenario.

For example, profiling a concurrent epoll_wait(2) benchmark, with
CONFIG_PROFILE_ANNOTATED_BRANCHES shows that for a two threads a 33%
incorrect rate was seen; and when incrementally increasing the number of
epoll instances (which is used, for example for multiple queuing load
balancing models), up to a 90% incorrect rate was seen.

Similarly, by deleting the prediction, 3% throughput boost was seen
across incremental threads.

Link: http://lkml.kernel.org/r/20181108051006.18751-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel/hung_task.c: force console verbose before panic

[ Upstream commit 168e06f7937d96c7222037d8a05565e8a6eb00fe ]

Based on commit 401c636a0eeb ("kernel/hung_task.c: show all hung tasks
before panic"), we could get the call stack of hung task.

However, if the console loglevel is not high, we still can not see the
useful panic information in practice, and in most cases users don't set
console loglevel to high level.

This patch is to force console verbose before system panic, so that the
real useful information can be seen in the console, instead of being
like the following, which doesn't have hung task information.

  INFO: task init:1 blocked for more than 120 seconds.
        Tainted: G     U  W         4.19.0-quilt-2e5dc0ac-g51b6c21d76cc #1
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  Kernel panic - not syncing: hung_task: blocked tasks
  CPU: 2 PID: 479 Comm: khungtaskd Tainted: G     U  W         4.19.0-quilt-2e5dc0ac-g51b6c21d76cc #1
  Call Trace:
   dump_stack+0x4f/0x65
   panic+0xde/0x231
   watchdog+0x290/0x410
   kthread+0x12c/0x150
   ret_from_fork+0x35/0x40
  reboot: panic mode set: p,w
  Kernel Offset: 0x34000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)

Link: http://lkml.kernel.org/r/27240C0AC20F114CBF8149A2696CBE4A6015B675@SHSMSX101.ccr.corp.intel.com
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

proc/sysctl: fix return error for proc_doulongvec_minmax()

[ Upstream commit 09be178400829dddc1189b50a7888495dd26aa84 ]

If the number of input parameters is less than the total parameters, an
EINVAL error will be returned.

For example, we use proc_doulongvec_minmax to pass up to two parameters
with kern_table:

{
.procname       = "monitor_signals",
.data           = &monitor_sigs,
.maxlen         = 2*sizeof(unsigned long),
.mode           = 0644,
.proc_handler   = proc_doulongvec_minmax,
},

Reproduce:

When passing two parameters, it's work normal.  But passing only one
parameter, an error "Invalid argument"(EINVAL) is returned.

  [root@cl150 ~]# echo 1 2 > /proc/sys/kernel/monitor_signals
  [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals
  1       2
  [root@cl150 ~]# echo 3 > /proc/sys/kernel/monitor_signals
  -bash: echo: write error: Invalid argument
  [root@cl150 ~]# echo $?
  1
  [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals
  3       2
  [root@cl150 ~]#

The following is the result after apply this patch.  No error is
returned when the number of input parameters is less than the total
parameters.

  [root@cl150 ~]# echo 1 2 > /proc/sys/kernel/monitor_signals
  [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals
  1       2
  [root@cl150 ~]# echo 3 > /proc/sys/kernel/monitor_signals
  [root@cl150 ~]# echo $?
  0
  [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals
  3       2
  [root@cl150 ~]#

There are three processing functions dealing with digital parameters,
__do_proc_dointvec/__do_proc_douintvec/__do_proc_doulongvec_minmax.

This patch deals with __do_proc_doulongvec_minmax, just as
__do_proc_dointvec does, adding a check for parameters 'left'.  In
__do_proc_douintvec, its code implementation explicitly does not support
multiple inputs.

static int __do_proc_douintvec(...){
         ...
         /*
          * Arrays are not supported, keep this simple. *Do not* add
          * support for them.
          */
         if (vleft != 1) {
                 *lenp = 0;
                 return -EINVAL;
         }
         ...
}

So, just __do_proc_doulongvec_minmax has the problem.  And most use of
proc_doulongvec_minmax/proc_doulongvec_ms_jiffies_minmax just have one
parameter.

Link: http://lkml.kernel.org/r/1544081775-15720-1-git-send-email-cheng.lin130@zte.com.cn
Signed-off-by: Cheng Lin <cheng.lin130@zte.com.cn>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel/hung_task.c: break RCU locks based on jiffies

[ Upstream commit 304ae42739b108305f8d7b3eb3c1aec7c2b643a9 ]

check_hung_uninterruptible_tasks() is currently calling rcu_lock_break()
for every 1024 threads.  But check_hung_task() is very slow if printk()
was called, and is very fast otherwise.

If many threads within some 1024 threads called printk(), the RCU grace
period might be extended enough to trigger RCU stall warnings.
Therefore, calling rcu_lock_break() for every some fixed jiffies will be
safer.

Link: http://lkml.kernel.org/r/1544800658-11423-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64/sve: ptrace: Fix SVE_PT_REGS_OFFSET definition

[ Upstream commit ee1b465b303591d3a04d403122bbc0d7026520fb ]

SVE_PT_REGS_OFFSET is supposed to indicate the offset for skipping
over the ptrace NT_ARM_SVE header (struct user_sve_header) to the
start of the SVE register data proper.

However, currently SVE_PT_REGS_OFFSET is defined in terms of struct
sve_context, which is wrong: that structure describes the SVE
header in the signal frame, not in the ptrace regset.

This patch fixes the definition to use the ptrace header structure
struct user_sve_header instead.

By good fortune, the two structures are the same size anyway, so
there is no functional or ABI change.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: lenovo: Add checks to fix of_led_classdev_register

[ Upstream commit 6ae16dfb61bce538d48b7fe98160fada446056c5 ]

In lenovo_probe_tpkbd(), the function of_led_classdev_register() could
return an error value that is unchecked. The fix adds these checks.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal: generic-adc: Fix adc to temp interpolation

[ Upstream commit 9d216211fded20fff301d0317af3238d8383634c ]

First correct the edge case to return the last element if we're
outside the range, rather than at the last element, so that
interpolation is not omitted for points between the two last entries in
the table.

Then correct the formula to perform linear interpolation based the two
points surrounding the read ADC value. The indices for temp are kept as
"hi" and "lo" to pair with the adc indices, but there's no requirement
that the temperature is provided in descendent order. mult_frac() is
used to prevent issues with overflowing the int.

Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: imx: Enable MSI from downstream components

[ Upstream commit 75cb8d20c112aba70f23d98e3f8d0a38ace16006 ]

The MSI Enable bit in the MSI Capability (PCIe r4.0, sec 7.7.1.2) controls
whether a Function can request service using MSI.

i.MX6 Root Ports implement the MSI Capability and may use MSI to request
service for events like PME, hotplug, AER, etc.  In addition, on i.MX6, the
MSI Enable bit controls delivery of MSI interrupts from components below
the Root Port.

Prior to f3fdfc4ac3a2 ("PCI: Remove host driver Kconfig selection of
CONFIG_PCIEPORTBUS"), enabling CONFIG_PCI_IMX6 automatically also enabled
CONFIG_PCIEPORTBUS, and when portdrv claimed the Root Ports, it set the MSI
Enable bit so it could use PME, hotplug, AER, etc.  As a side effect, that
also enabled delivery of MSI interrupts from downstream components.

The imx6q-pcie driver itself does not depend on portdrv, so set MSI Enable
in imx6q-pcie so MSI from downstream components works even if nobody uses
MSI for the Root Port events.

Fixes: f3fdfc4ac3a2 ("PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Tested-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kdb: Don't back trace on a cpu that didn't round up

[ Upstream commit 162bc7f5afd75b72acbe3c5f3488ef7e64a3fe36 ]

If you have a CPU that fails to round up and then run 'btc' you'll end
up crashing in kdb becaue we dereferenced NULL.  Let's add a check.
It's wise to also set the task to NULL when leaving the debugger so
that if we fail to round up on a later entry into the debugger we
won't backtrace a stale task.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal: bcm2835: enable hwmon explicitly

[ Upstream commit d56c19d07e0bc3ceff366a49b7d7a2440c967b1b ]

By defaul of-based thermal driver do not enable hwmon.
This patch does this explicitly, so that the temperature can be read
through the common hwmon sysfs.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block/swim3: Fix -EBUSY error when re-opening device after unmount

[ Upstream commit 296dcc40f2f2e402facf7cd26cf3f2c8f4b17d47 ]

When the block device is opened with FMODE_EXCL, ref_count is set to -1.
This value doesn't get reset when the device is closed which means the
device cannot be opened again. Fix this by checking for refcount <= 0
in the release method.

Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fsl/fman: Use GFP_ATOMIC in {memac,tgec}_add_hash_mac_address()

[ Upstream commit 0d9c9a238faf925823bde866182c663b6d734f2e ]

These functions are called from atomic context:

[    9.150239] BUG: sleeping function called from invalid context at /home/scott/git/linux/mm/slab.h:421
[    9.158159] in_atomic(): 1, irqs_disabled(): 0, pid: 4432, name: ip
[    9.163128] CPU: 8 PID: 4432 Comm: ip Not tainted 4.20.0-rc2-00169-g63d86876f324 #29
[    9.163130] Call Trace:
[    9.170701] [c0000002e899a980] [c0000000009c1068] .dump_stack+0xa8/0xec (unreliable)
[    9.177140] [c0000002e899aa10] [c00000000007a7b4] .___might_sleep+0x138/0x164
[    9.184440] [c0000002e899aa80] [c0000000001d5bac] .kmem_cache_alloc_trace+0x238/0x30c
[    9.191216] [c0000002e899ab40] [c00000000065ea1c] .memac_add_hash_mac_address+0x104/0x198
[    9.199464] [c0000002e899abd0] [c00000000065a788] .set_multi+0x1c8/0x218
[    9.206242] [c0000002e899ac80] [c0000000006615ec] .dpaa_set_rx_mode+0xdc/0x17c
[    9.213544] [c0000002e899ad00] [c00000000083d2b0] .__dev_set_rx_mode+0x80/0xd4
[    9.219535] [c0000002e899ad90] [c00000000083d334] .dev_set_rx_mode+0x30/0x54
[    9.225271] [c0000002e899ae10] [c00000000083d4a0] .__dev_open+0x148/0x1c8
[    9.230751] [c0000002e899aeb0] [c00000000083d934] .__dev_change_flags+0x19c/0x1e0
[    9.230755] [c0000002e899af60] [c00000000083d9a4] .dev_change_flags+0x2c/0x80
[    9.242752] [c0000002e899aff0] [c0000000008554ec] .do_setlink+0x350/0xf08
[    9.248228] [c0000002e899b170] [c000000000857ad0] .rtnl_newlink+0x588/0x7e0
[    9.253965] [c0000002e899b740] [c000000000852424] .rtnetlink_rcv_msg+0x3e0/0x498
[    9.261440] [c0000002e899b820] [c000000000884790] .netlink_rcv_skb+0x134/0x14c
[    9.267607] [c0000002e899b8e0] [c000000000851840] .rtnetlink_rcv+0x18/0x2c
[    9.274558] [c0000002e899b950] [c000000000883c8c] .netlink_unicast+0x214/0x318
[    9.281163] [c0000002e899ba00] [c000000000884220] .netlink_sendmsg+0x348/0x444
[    9.287076] [c0000002e899bae0] [c00000000080d13c] .sock_sendmsg+0x2c/0x54
[    9.287080] [c0000002e899bb50] [c0000000008106c0] .___sys_sendmsg+0x2d0/0x2d8
[    9.298375] [c0000002e899bd30] [c000000000811a80] .__sys_sendmsg+0x5c/0xb0
[    9.303939] [c0000002e899be20] [c0000000000006b0] system_call+0x60/0x6c

Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gdrom: fix a memory leak bug

[ Upstream commit 093c48213ee37c3c3ff1cf5ac1aa2a9d8bc66017 ]

In probe_gdrom(), the buffer pointed by 'gd.cd_info' is allocated through
kzalloc() and is used to hold the information of the gdrom device. To
register and unregister the device, the pointer 'gd.cd_info' is passed to
the functions register_cdrom() and unregister_cdrom(), respectively.
However, this buffer is not freed after it is used, which can cause a
memory leak bug.

This patch simply frees the buffer 'gd.cd_info' in exit_gdrom() to fix the
above issue.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

isdn: hisax: hfc_pci: Fix a possible concurrency use-after-free bug in HFCPCI_l1hw()

[ Upstream commit 7418e6520f22a2e35815122fa5a53d5bbfa2c10f ]

In drivers/isdn/hisax/hfc_pci.c, the functions hfcpci_interrupt() and
HFCPCI_l1hw() may be concurrently executed.

HFCPCI_l1hw()
  line 1173: if (!cs->tx_skb)

hfcpci_interrupt()
  line 942: spin_lock_irqsave();
  line 1066: dev_kfree_skb_irq(cs->tx_skb);

Thus, a possible concurrency use-after-free bug may occur
in HFCPCI_l1hw().

To fix these bugs, the calls to spin_lock_irqsave() and
spin_unlock_irqrestore() are added in HFCPCI_l1hw(), to protect the
access to cs->tx_skb.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

zram: fix lockdep warning of free block handling

[ Upstream commit 3c9959e025472122a61faebb208525cf26b305d1 ]

Patch series "zram idle page writeback", v3.

Inherently, swap device has many idle pages which are rare touched since
it was allocated.  It is never problem if we use storage device as swap.
However, it's just waste for zram-swap.

This patchset supports zram idle page writeback feature.

* Admin can define what is idle page "no access since X time ago"
* Admin can define when zram should writeback them
* Admin can define when zram should stop writeback to prevent wearout

Details are in each patch's description.

This patch (of 7):

  ================================
  WARNING: inconsistent lock state
  4.19.0+ #390 Not tainted
  --------------------------------
  inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
  zram_verify/2095 [HC0[0]:SC1[1]:HE1:SE0] takes:
  00000000b1828693 (&(&zram->bitmap_lock)->rlock){+.?.}, at: put_entry_bdev+0x1e/0x50
  {SOFTIRQ-ON-W} state was registered at:
    _raw_spin_lock+0x2c/0x40
    zram_make_request+0x755/0xdc9
    generic_make_request+0x373/0x6a0
    submit_bio+0x6c/0x140
    __swap_writepage+0x3a8/0x480
    shrink_page_list+0x1102/0x1a60
    shrink_inactive_list+0x21b/0x3f0
    shrink_node_memcg.constprop.99+0x4f8/0x7e0
    shrink_node+0x7d/0x2f0
    do_try_to_free_pages+0xe0/0x300
    try_to_free_pages+0x116/0x2b0
    __alloc_pages_slowpath+0x3f4/0xf80
    __alloc_pages_nodemask+0x2a2/0x2f0
    __handle_mm_fault+0x42e/0xb50
    handle_mm_fault+0x55/0xb0
    __do_page_fault+0x235/0x4b0
    page_fault+0x1e/0x30
  irq event stamp: 228412
  hardirqs last  enabled at (228412): [<ffffffff98245846>] __slab_free+0x3e6/0x600
  hardirqs last disabled at (228411): [<ffffffff98245625>] __slab_free+0x1c5/0x600
  softirqs last  enabled at (228396): [<ffffffff98e0031e>] __do_softirq+0x31e/0x427
  softirqs last disabled at (228403): [<ffffffff98072051>] irq_exit+0xd1/0xe0

  other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(&(&zram->bitmap_lock)->rlock);
    <Interrupt>
      lock(&(&zram->bitmap_lock)->rlock);

   *** DEADLOCK ***

  no locks held by zram_verify/2095.

  stack backtrace:
  CPU: 5 PID: 2095 Comm: zram_verify Not tainted 4.19.0+ #390
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
  Call Trace:
   <IRQ>
   dump_stack+0x67/0x9b
   print_usage_bug+0x1bd/0x1d3
   mark_lock+0x4aa/0x540
   __lock_acquire+0x51d/0x1300
   lock_acquire+0x90/0x180
   _raw_spin_lock+0x2c/0x40
   put_entry_bdev+0x1e/0x50
   zram_free_page+0xf6/0x110
   zram_slot_free_notify+0x42/0xa0
   end_swap_bio_read+0x5b/0x170
   blk_update_request+0x8f/0x340
   scsi_end_request+0x2c/0x1e0
   scsi_io_completion+0x98/0x650
   blk_done_softirq+0x9e/0xd0
   __do_softirq+0xcc/0x427
   irq_exit+0xd1/0xe0
   do_IRQ+0x93/0x120
   common_interrupt+0xf/0xf
   </IRQ>

With writeback feature, zram_slot_free_notify could be called in softirq
context by end_swap_bio_read.  However, bitmap_lock is not aware of that
so lockdep yell out:

  get_entry_bdev
  spin_lock(bitmap->lock);
  irq
  softirq
  end_swap_bio_read
  zram_slot_free_notify
  zram_slot_lock <-- deadlock prone
  zram_free_page
  put_entry_bdev
  spin_lock(bitmap->lock); <-- deadlock prone

With akpm's suggestion (i.e.  bitmap operation is already atomic), we
could remove bitmap lock.  It might fail to find a empty slot if serious
contention happens.  However, it's not severe problem because huge page
writeback has already possiblity to fail if there is severe memory
pressure.  Worst case is just keeping the incompressible in memory, not
storage.

The other problem is zram_slot_lock in zram_slot_slot_free_notify.  To
make it safe is this patch introduces zram_slot_trylock where
zram_slot_free_notify uses it.  Although it's rare to be contented, this
patch adds new debug stat "miss_free" to keep monitoring how often it
happens.

Link: http://lkml.kernel.org/r/20181127055429.251614-2-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init

[ Upstream commit 3c0c12cc8f00ca5f81acb010023b8eb13e9a7004 ]

When CONFIG_KASAN is enabled on large memory SMP systems, the deferrred
pages initialization can take a long time.  Below were the reported init
times on a 8-socket 96-core 4TB IvyBridge system.

  1) Non-debug kernel without CONFIG_KASAN
     [    8.764222] node 1 initialised, 132086516 pages in 7027ms

  2) Debug kernel with CONFIG_KASAN
     [  146.288115] node 1 initialised, 132075466 pages in 143052ms

So the page init time in a debug kernel was 20X of the non-debug kernel.
The long init time can be problematic as the page initialization is done
with interrupt disabled.  In this particular case, it caused the
appearance of following warning messages as well as NMI backtraces of all
the cores that were doing the initialization.

[   68.240049] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[   68.241000] rcu:  25-...0: (100 ticks this GP) idle=b72/1/0x4000000000000000 softirq=915/915 fqs=16252
[   68.241000] rcu:  44-...0: (95 ticks this GP) idle=49a/1/0x4000000000000000 softirq=788/788 fqs=16253
[   68.241000] rcu:  54-...0: (104 ticks this GP) idle=03a/1/0x4000000000000000 softirq=721/825 fqs=16253
[   68.241000] rcu:  60-...0: (103 ticks this GP) idle=cbe/1/0x4000000000000000 softirq=637/740 fqs=16253
[   68.241000] rcu:  72-...0: (105 ticks this GP) idle=786/1/0x4000000000000000 softirq=536/641 fqs=16253
[   68.241000] rcu:  84-...0: (99 ticks this GP) idle=292/1/0x4000000000000000 softirq=537/537 fqs=16253
[   68.241000] rcu:  111-...0: (104 ticks this GP) idle=bde/1/0x4000000000000000 softirq=474/476 fqs=16253
[   68.241000] rcu:  (detected by 13, t=65018 jiffies, g=249, q=2)

The long init time was mainly caused by the call to kasan_free_pages() to
poison the newly initialized pages.  On a 4TB system, we are talking about
almost 500GB of memory probably on the same node.

In reality, we may not need to poison the newly initialized pages before
they are ever allocated.  So KASAN poisoning of freed pages before the
completion of deferred memory initialization is now disabled.  Those pages
will be properly poisoned when they are allocated or freed after deferred
pages initialization is done.

With this change, the new page initialization time became:

[   21.948010] node 1 initialised, 132075466 pages in 18702ms

This was still about double the non-debug kernel time, but was much
better than before.

Link: http://lkml.kernel.org/r/1544459388-8736-1-git-send-email-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ocfs2: improve ocfs2 Makefile

[ Upstream commit 9e6aea22802b5684c7e1d69822aeb0844dd01953 ]

Included file path was hard-wired in the ocfs2 makefile, which might
causes some confusion when compiling ocfs2 as an external module.

Say if we compile ocfs2 module as following.
cp -r /kernel/tree/fs/ocfs2 /other/dir/ocfs2
cd /other/dir/ocfs2
make -C /path/to/kernel_source M=`pwd` modules

Acutally, the compiler wil try to find included file in
/kernel/tree/fs/ocfs2, rather than the directory /other/dir/ocfs2.

To fix this little bug, we introduce the var $(src) provided by kbuild.
$(src) means the absolute path of the running kbuild file.

Link: http://lkml.kernel.org/r/20181108085546.15149-1-lchen@suse.com
Signed-off-by: Larry Chen <lchen@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ocfs2: don't clear bh uptodate for block read

[ Upstream commit 70306d9dce75abde855cefaf32b3f71eed8602a3 ]

For sync io read in ocfs2_read_blocks_sync(), first clear bh uptodate flag
and submit the io, second wait io done, last check whether bh uptodate, if
not return io error.

If two sync io for the same bh were issued, it could be the first io done
and set uptodate flag, but just before check that flag, the second io came
in and cleared uptodate, then ocfs2_read_blocks_sync() for the first io
will return IO error.

Indeed it's not necessary to clear uptodate flag, as the io end handler
end_buffer_read_sync() will set or clear it based on io succeed or failed.

The following message was found from a nfs server but the underlying
storage returned no error.

[4106438.567376] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2780 ERROR: read block 1238823695 failed -5
[4106438.567569] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2812 ERROR: status = -5
[4106438.567611] (nfsd,7146,3):ocfs2_test_inode_bit:2894 ERROR: get alloc slot and bit failed -5
[4106438.567643] (nfsd,7146,3):ocfs2_test_inode_bit:2932 ERROR: status = -5
[4106438.567675] (nfsd,7146,3):ocfs2_get_dentry:94 ERROR: test inode bit failed -5

Same issue in non sync read ocfs2_read_blocks(), fixed it as well.

Link: http://lkml.kernel.org/r/20181121020023.3034-4-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arch/sh/boards/mach-kfr2r09/setup.c: fix struct mtd_oob_ops build warning

[ Upstream commit 440e7b379f91acd245d5c8de94d533f40f5dffb3 ]

arch/sh/boards/mach-kfr2r09/setup.c does not need to #include
<mtd/onenand.h>, and doing so causes a build warning, so drop that header
file.

In file included from ../arch/sh/boards/mach-kfr2r09/setup.c:28:
../include/linux/mtd/onenand.h:225:12: warning: 'struct mtd_oob_ops' declared inside parameter list will not be visible outside of this definition or declaration
     struct mtd_oob_ops *ops);

Link: http://lkml.kernel.org/r/702f0a25-c63e-6912-4640-6ab0f00afbc7@infradead.org
Fixes: f3590dc32974 ("media: arch: sh: kfr2r09: Use new renesas-ceu camera driver")

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/decode_stacktrace: only strip base path when a prefix of the path

[ Upstream commit 67a28de47faa83585dd644bd4c31e5a1d9346c50 ]

Running something like:

decodecode vmlinux .

leads to interested results where not only the leading "." gets stripped
from the displayed paths, but also anywhere in the string, displaying
something like:

kvm_vcpu_check_block (arch/arm64/kvm/virt/kvm/kvm_mainc:2141)

which doesn't help further processing.

Fix it by only stripping the base path if it is a prefix of the path.

Link: http://lkml.kernel.org/r/20181210174659.31054-3-marc.zyngier@arm.com
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf python: Do not force closing original perf descriptor in evlist.get_pollfd()

[ Upstream commit a389aece97938966616ce0336466b98b0351ef10 ]

Ondřej reported that when compiled with python3, the python extension
regresses in evlist.get_pollfd function behaviour.

The evlist.get_pollfd function creates file objects from evlist's fds
and returns them in a list. The python3 version also sets them to 'close
the original descriptor' when the object dies (is closed), by passing
True via the 'closefd' arg in the PyFile_FromFd call.

The python's closefd doc says:

  If closefd is False, the underlying file descriptor will be kept open
  when the file is closed.

That's why the following line in python3 closes all evlist fds:

  evlist.get_pollfd()

the returned list is immediately destroyed and that takes down the
original events fds.

Passing closefd as False to PyFile_FromFd to fix this.

Reported-by: Ondřej Lysoněk <olysonek@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 66dfdff03d19 ("perf tools: Add Python 3 support")
Link: http://lkml.kernel.org/r/20181226112121.5285-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup: fix parsing empty mount option string

[ Upstream commit e250d91d65750a0c0c62483ac4f9f357e7317617 ]

This fixes the case where all mount options specified are consumed by an
LSM and all that's left is an empty string. In this case cgroupfs should
accept the string and not fail.

How to reproduce (with SELinux enabled):

    # umount /sys/fs/cgroup/unified
    # mount -o context=system_u:object_r:cgroup_t:s0 -t cgroup2 cgroup2 /sys/fs/cgroup/unified
    mount: /sys/fs/cgroup/unified: wrong fs type, bad option, bad superblock on cgroup2, missing codepage or helper program, or other error.
    # dmesg | tail -n 1
    [   31.575952] cgroup: cgroup2: unknown option ""

Fixes: 67e9c74b8a87 ("cgroup: replace __DEVEL__sane_behavior with cgroup2 fs type")
[NOTE: should apply on top of commit 5136f6365ce3 ("cgroup: implement "nsdelegate" mount option"), older versions need manual rebase]
Suggested-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix sbi->extent_list corruption issue

[ Upstream commit e4589fa545e0020dbbc3c9bde35f35f949901392 ]

When there is a failure in f2fs_fill_super() after/during
the recovery of fsync'd nodes, it frees the current sbi and
retries again. This time the mount is successful, but the files
that got recovered before retry, still holds the extent tree,
whose extent nodes list is corrupted since sbi and sbi->extent_list
is freed up. The list_del corruption issue is observed when the
file system is getting unmounted and when those recoverd files extent
node is being freed up in the below context.

list_del corruption. prev->next should be fffffff1e1ef5480, but was (null)
<...>
kernel BUG at kernel/msm-4.14/lib/list_debug.c:53!
lr : __list_del_entry_valid+0x94/0xb4
pc : __list_del_entry_valid+0x94/0xb4
<...>
Call trace:
__list_del_entry_valid+0x94/0xb4
__release_extent_node+0xb0/0x114
__free_extent_tree+0x58/0x7c
f2fs_shrink_extent_tree+0xdc/0x3b0
f2fs_leave_shrinker+0x28/0x7c
f2fs_put_super+0xfc/0x1e0
generic_shutdown_super+0x70/0xf4
kill_block_super+0x2c/0x5c
kill_f2fs_super+0x44/0x50
deactivate_locked_super+0x60/0x8c
deactivate_super+0x68/0x74
cleanup_mnt+0x40/0x78
__cleanup_mnt+0x1c/0x28
task_work_run+0x48/0xd0
do_notify_resume+0x678/0xe98
work_pending+0x8/0x14

Fix this by not creating extents for those recovered files if shrinker is
not registered yet. Once mount is successful and shrinker is registered,
those files can have extents again.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

niu: fix missing checks of niu_pci_eeprom_read

[ Upstream commit 26fd962bde0b15e54234fe762d86bc0349df1de4 ]

niu_pci_eeprom_read() may fail, so we should check its return value
before using the read data.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Shannon Nelson <shannon.lee.nelson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: Avoid marking pages with "changed protection"

[ Upstream commit 8892d8545f2d0342b9c550defbfb165db237044b ]

Changing protection is a very high cost operation in UML
because in addition to an extra syscall it also interrupts
mmap merge sequences generated by the tlb.

While the condition is not particularly common it is worth
avoiding.

Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix use-after-free issue when accessing sbi->stat_info

[ Upstream commit 60aa4d5536ab7fe32433ca1173bd9d6633851f27 ]

iput() on sbi->node_inode can update sbi->stat_info
in the below context, if the f2fs_write_checkpoint()
has failed with error.

f2fs_balance_fs_bg+0x1ac/0x1ec
f2fs_write_node_pages+0x4c/0x260
do_writepages+0x80/0xbc
__writeback_single_inode+0xdc/0x4ac
writeback_single_inode+0x9c/0x144
write_inode_now+0xc4/0xec
iput+0x194/0x22c
f2fs_put_super+0x11c/0x1e8
generic_shutdown_super+0x70/0xf4
kill_block_super+0x2c/0x5c
kill_f2fs_super+0x44/0x50
deactivate_locked_super+0x60/0x8c
deactivate_super+0x68/0x74
cleanup_mnt+0x40/0x78

Fix this by moving f2fs_destroy_stats() further below iput() in
both f2fs_put_super() and f2fs_fill_super() paths.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: check ntwrk_buf_start for NULL before dereferencing it

[ Upstream commit 59a63e479ce36a3f24444c3a36efe82b78e4a8e0 ]

RHBZ: 1021460

There is an issue where when multiple threads open/close the same directory
ntwrk_buf_start might end up being NULL, causing the call to smbCalcSize
later to oops with a NULL deref.

The real bug is why this happens and why this can become NULL for an
open cfile, which should not be allowed.
This patch tries to avoid a oops until the time when we fix the underlying
issue.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: ralink: Select CONFIG_CPU_MIPSR2_IRQ_VI on MT7620/8

[ Upstream commit 0b15394475e3bcaf35ca4bf22fc55d56df67224e ]

Testing has shown, that when using mainline U-Boot on MT7688 based
boards, the system may hang or crash while mounting the root-fs. The
main issue here is that mainline U-Boot configures EBase to a value
near the end of system memory. And with CONFIG_CPU_MIPSR2_IRQ_VI
disabled, trap_init() will not allocate a new area to place the
exception handler. The original value will be used and the handler
will be copied to this location, which might already be used by some
userspace application.

The MT7688 supports VI - its config3 register is 0x00002420, so VInt
(Bit 5) is set. But without setting CONFIG_CPU_MIPSR2_IRQ_VI this
bit will not be evaluated to result in "cpu_has_vi" being set. This
patch now selects CONFIG_CPU_MIPSR2_IRQ_VI on MT7620/8 which results
trap_init() to allocate some memory for the exception handler.

Please note that this issue was not seen with the Mediatek U-Boot
version, as it does not touch EBase (stays at default of 0x8000.0000).
This is strictly also not correct as the kernel (_text) resides
here.

Signed-off-by: Stefan Roese <sr@denx.de>
[paul.burton@mips.com: s/beeing/being/]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ux500 - Use proper enum in hash_set_dma_transfer

[ Upstream commit 5ac93f808338f4dd465402e91869702eb87db241 ]

Clang warns when one enumerated type is implicitly converted to another:

drivers/crypto/ux500/hash/hash_core.c:169:4: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
                        direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
                        ^~~~~~~~~
1 warning generated.

dmaengine_prep_slave_sg expects an enum from dma_transfer_direction.
We know that the only direction supported by this function is
DMA_TO_DEVICE because of the check at the top of this function so we can
just use the equivalent value from dma_transfer_direction.

DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ux500 - Use proper enum in cryp_set_dma_transfer

[ Upstream commit 9d880c5945c748d8edcac30965f3349a602158c4 ]

Clang warns when one enumerated type is implicitly converted to another:

drivers/crypto/ux500/cryp/cryp_core.c:559:5: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
                                direction, DMA_CTRL_ACK);
                                ^~~~~~~~~
drivers/crypto/ux500/cryp/cryp_core.c:583:5: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
                                direction,
                                ^~~~~~~~~
2 warnings generated.

dmaengine_prep_slave_sg expects an enum from dma_transfer_direction.
Because we know the value of the dma_data_direction enum from the
switch statement, we can just use the proper value from
dma_transfer_direction so there is no more conversion.

DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1
DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

seq_buf: Make seq_buf_puts() null-terminate the buffer

[ Upstream commit 0464ed24380905d640030d368cd84a4e4d1e15e2 ]

Currently seq_buf_puts() will happily create a non null-terminated
string for you in the buffer. This is particularly dangerous if the
buffer is on the stack.

For example:

  char buf[8];
  char secret = "secret";
  struct seq_buf s;

  seq_buf_init(&s, buf, sizeof(buf));
  seq_buf_puts(&s, "foo");
  printk("Message is %s\n", buf);

Can result in:

  Message is fooªªªªªsecret

We could require all users to memset() their buffer to zero before
use. But that seems likely to be forgotten and lead to bugs.

Instead we can change seq_buf_puts() to always leave the buffer in a
null-terminated state.

The only downside is that this makes the buffer 1 character smaller
for seq_buf_puts(), but that seems like a good trade off.

Link: http://lkml.kernel.org/r/20181019042109.8064-1-mpe@ellerman.id.au
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (lm80) fix a missing check of bus read in lm80 probe

[ Upstream commit 9aa3aa15f4c2f74f47afd6c5db4b420fadf3f315 ]

In lm80_probe(), if lm80_read_value() fails, it returns a negative
error number which is stored to data->fan[f_min] and will be further
used. We should avoid using the data if the read fails.

The fix checks if lm80_read_value() fails, and if so, returns with the
error number.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (lm80) fix a missing check of the status of SMBus read

[ Upstream commit c9c63915519b1def7043b184680f33c24cd49d7b ]

If lm80_read_value() fails, it returns a negative number instead of the
correct read data. Therefore, we should avoid using the data if it
fails.

The fix checks if lm80_read_value() fails, and if so, returns with the
error number.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
[groeck: One variable for return values is enough]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz

[ Upstream commit 14541b1e7e723859ff2c75c6fc10cdbbec6b8c34 ]

Current libbfd feature test unconditionally links against -liberty and -lz.
While it's required on some systems (e.g. opensuse), it's completely
unnecessary on the others, where only -lbdf is sufficient (debian).
This patch streamlines (and renames) the following feature checks:

feature-libbfd           - only link against -lbfd (debian),
                           see commit 2cf9040714f3 ("perf tools: Fix bfd
   dependency libraries detection")
feature-libbfd-liberty   - link against -lbfd and -liberty
feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse),
                           see commit 280e7c48c3b8 ("perf tools: fix BFD
   detection on opensuse")

(feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z}
for clarity)

The main motivation is to fix this feature test for bpftool which is
currently broken on debian (libbfd feature shows OFF, but we still
unconditionally link against -lbfd and it works).

Tested on debian with only -lbfd installed (without -liberty); I'd
appreciate if somebody on the other systems can test this new detection
method.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: nfs_compare_mount_options always compare auth flavors.

[ Upstream commit 594d1644cd59447f4fceb592448d5cd09eb09b5e ]

This patch removes the check from nfs_compare_mount_options to see if a
`sec' option was passed for the current mount before comparing auth
flavors and instead just always compares auth flavors.

Consider the following scenario:

You have a server with the address 192.168.1.1 and two exports /export/a
and /export/b.  The first export supports `sys' and `krb5' security, the
second just `sys'.

Assume you start with no mounts from the server.

The following results in EIOs being returned as the kernel nfs client
incorrectly thinks it can share the underlying `struct nfs_server's:

$ mkdir /tmp/{a,b}
$ sudo mount -t nfs -o vers=3,sec=krb5 192.168.1.1:/export/a /tmp/a
$ sudo mount -t nfs -o vers=3          192.168.1.1:/export/b /tmp/b
$ df >/dev/null
df: ‘/tmp/b’: Input/output error

Signed-off-by: Chris Perl <cperl@janestreet.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kvm: Change offset in kvm_write_guest_offset_cached to unsigned

[ Upstream commit 7a86dab8cf2f0fdf508f3555dddfc236623bff60 ]

Since the offset is added directly to the hva from the
gfn_to_hva_cache, a negative offset could result in an out of bounds
write. The existing BUG_ON only checks for addresses beyond the end of
the gfn_to_hva_cache, not for addresses before the start of the
gfn_to_hva_cache.

Note that all current call sites have non-negative offsets.

Fixes: 4ec6e8636256 ("kvm: Introduce kvm_write_guest_offset_cached()")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Cfir Cohen <cfir@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fadump: Do not allow hot-remove memory from fadump reserved area.

[ Upstream commit 0db6896ff6332ba694f1e61b93ae3b2640317633 ]

For fadump to work successfully there should not be any holes in reserved
memory ranges where kernel has asked firmware to move the content of old
kernel memory in event of crash. Now that fadump uses CMA for reserved
area, this memory area is now not protected from hot-remove operations
unless it is cma allocated. Hence, fadump service can fail to re-register
after the hot-remove operation, if hot-removed memory belongs to fadump
reserved region. To avoid this make sure that memory from fadump reserved
area is not hot-removable if fadump is registered.

However, if user still wants to remove that memory, he can do so by
manually stopping fadump service before hot-remove operation.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86: svm: report MSR_IA32_MCG_EXT_CTL as unsupported

[ Upstream commit e87555e550cef4941579cd879759a7c0dee24e68 ]

AMD doesn't seem to implement MSR_IA32_MCG_EXT_CTL and svm code in kvm
knows nothing about it, however, this MSR is among emulated_msrs and
thus returned with KVM_GET_MSR_INDEX_LIST. The consequent KVM_GET_MSRS,
of course, fails.

Report the MSR as unsupported to not confuse userspace.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins

[ Upstream commit 2b745ac3cceb8fc1d9985990c8241a821ea97e53 ]

The GPIOAO pins (as well as the two exotic GPIO_BSD_EN and GPIO_TEST_N)
only belong to the pin controller in the AO domain. With the current
definition these pins cannot be referred to in .dts files as group
(which is possible on GXBB and GXL for example).

Add a separate "gpio_aobus" function to fix the mapping between the pin
controller and the GPIO pins in the AO domain. This is similar to how
the GXBB and GXL drivers implement this functionality.

Fixes: 9dab1868ec0db4 ("pinctrl: amlogic: Make driver independent from two-domain configuration")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins

[ Upstream commit 42f9b48cc5402be11d2364275eb18c257d2a79e8 ]

The GPIOAO pins (as well as the two exotic GPIO_BSD_EN and GPIO_TEST_N)
only belong to the pin controller in the AO domain. With the current
definition these pins cannot be referred to in .dts files as group
(which is possible on GXBB and GXL for example).

Add a separate "gpio_aobus" function to fix the mapping between the pin
controller and the GPIO pins in the AO domain. This is similar to how
the GXBB and GXL drivers implement this functionality.

Fixes: 9dab1868ec0db4 ("pinctrl: amlogic: Make driver independent from two-domain configuration")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/mm: Fix reporting of kernel execute faults on the 8xx

[ Upstream commit ffca395b11c4a5a6df6d6345f794b0e3d578e2d0 ]

On the 8xx, no-execute is set via PPP bits in the PTE. Therefore
a no-exec fault generates DSISR_PROTFAULT error bits,
not DSISR_NOEXEC_OR_G.

This patch adds DSISR_PROTFAULT in the test mask.

Fixes: d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute faults")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: fbcon: Fix unregister crash when more than one framebuffer

[ Upstream commit 2122b40580dd9d0620398739c773d07a7b7939d0 ]

When unregistering fbdev using unregister_framebuffer(), any bound
console will unbind automatically. This is working fine if this is the
only framebuffer, resulting in a switch to the dummy console. However if
there is a fb0 and I unregister fb1 having a bound console, I eventually
get a crash. The fastest way for me to trigger the crash is to do a
reboot, resulting in this splat:

[   76.478825] WARNING: CPU: 0 PID: 527 at linux/kernel/workqueue.c:1442 __queue_work+0x2d4/0x41c
[   76.478849] Modules linked in: raspberrypi_hwmon gpio_backlight backlight bcm2835_rng rng_core [last unloaded: tinydrm]
[   76.478916] CPU: 0 PID: 527 Comm: systemd-udevd Not tainted 4.20.0-rc4+ #4
[   76.478933] Hardware name: BCM2835
[   76.478949] Backtrace:
[   76.478995] [<c010d388>] (dump_backtrace) from [<c010d670>] (show_stack+0x20/0x24)
[   76.479022]  r6:00000000 r5:c0bc73be r4:00000000 r3:6fb5bf81
[   76.479060] [<c010d650>] (show_stack) from [<c08e82f4>] (dump_stack+0x20/0x28)
[   76.479102] [<c08e82d4>] (dump_stack) from [<c0120070>] (__warn+0xec/0x12c)
[   76.479134] [<c011ff84>] (__warn) from [<c01201e4>] (warn_slowpath_null+0x4c/0x58)
[   76.479165]  r9:c0eb6944 r8:00000001 r7:c0e927f8 r6:c0bc73be r5:000005a2 r4:c0139e84
[   76.479197] [<c0120198>] (warn_slowpath_null) from [<c0139e84>] (__queue_work+0x2d4/0x41c)
[   76.479222]  r6:d7666a00 r5:c0e918ee r4:dbc4e700
[   76.479251] [<c0139bb0>] (__queue_work) from [<c013a02c>] (queue_work_on+0x60/0x88)
[   76.479281]  r10:c0496bf8 r9:00000100 r8:c0e92ae0 r7:00000001 r6:d9403700 r5:d7666a00
[   76.479298]  r4:20000113
[   76.479348] [<c0139fcc>] (queue_work_on) from [<c0496c28>] (cursor_timer_handler+0x30/0x54)
[   76.479374]  r7:d8a8fabc r6:c0e08088 r5:d8afdc5c r4:d8a8fabc
[   76.479413] [<c0496bf8>] (cursor_timer_handler) from [<c0178744>] (call_timer_fn+0x100/0x230)
[   76.479435]  r4:c0e9192f r3:d758a340
[   76.479465] [<c0178644>] (call_timer_fn) from [<c0178980>] (expire_timers+0x10c/0x12c)
[   76.479495]  r10:40000000 r9:c0e9192f r8:c0e92ae0 r7:d8afdccc r6:c0e19280 r5:c0496bf8
[   76.479513]  r4:d8a8fabc
[   76.479541] [<c0178874>] (expire_timers) from [<c0179630>] (run_timer_softirq+0xa8/0x184)
[   76.479570]  r9:00000001 r8:c0e19280 r7:00000000 r6:c0e08088 r5:c0e1a3e0 r4:c0e19280
[   76.479603] [<c0179588>] (run_timer_softirq) from [<c0102404>] (__do_softirq+0x1ac/0x3fc)
[   76.479632]  r10:c0e91680 r9:d8afc020 r8:0000000a r7:00000100 r6:00000001 r5:00000002
[   76.479650]  r4:c0eb65ec
[   76.479686] [<c0102258>] (__do_softirq) from [<c0124d10>] (irq_exit+0xe8/0x168)
[   76.479716]  r10:d8d1a9b0 r9:d8afc000 r8:00000001 r7:d949c000 r6:00000000 r5:c0e8b3f0
[   76.479734]  r4:00000000
[   76.479764] [<c0124c28>] (irq_exit) from [<c016b72c>] (__handle_domain_irq+0x94/0xb0)
[   76.479793] [<c016b698>] (__handle_domain_irq) from [<c01021dc>] (bcm2835_handle_irq+0x3c/0x48)
[   76.479823]  r8:d8afdebc r7:d8afddfc r6:ffffffff r5:c0e089f8 r4:d8afddc8 r3:d8afddc8
[   76.479851] [<c01021a0>] (bcm2835_handle_irq) from [<c01019f0>] (__irq_svc+0x70/0x98)

The problem is in the console rebinding in fbcon_fb_unbind(). It uses the
virtual console index as the new framebuffer index to bind the console(s)
to. The correct way is to use the con2fb_map lookup table to find the
framebuffer index.

Fixes: cfafca8067c6 ("fbdev: fbcon: console unregistration from unregister_framebuffer")
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI/APEI: Clear GHES block_status before panic()

[ Upstream commit 98cff8b23ed1c763a029ee81ea300df0d153d07d ]

In __ghes_panic() clear the block status in the APEI generic
error status block for that generic hardware error source before
calling panic() to prevent a second panic() in the crash kernel
for exactly the same fatal error.

Otherwise ghes_probe(), running in the crash kernel, would see
an unhandled error in the APEI generic error status block and
panic again, thereby precluding any crash dump.

Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: David Arcari <darcari@redhat.com>
Tested-by: Tyler Baicar <baicar.tyler@gmail.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: Fix an issue that PME is not enabled during runtime suspend

[ Upstream commit 1fb3a7a75e2efcc83ef21f2434069cddd6fae6f5 ]

I210 ethernet card doesn't wakeup when a cable gets plugged. It's
because its PME is not set.

Since commit 42eca2302146 ("PCI: Don't touch card regs after runtime
suspend D3"), if the PCI state is saved, pci_pm_runtime_suspend() stops
calling pci_finish_runtime_suspend(), which enables the PCI PME.

To fix the issue, let's not to save PCI states when it's runtime
suspend, to let the PCI subsystem enables PME.

Fixes: 42eca2302146 ("PCI: Don't touch card regs after runtime suspend D3")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Do not enable NAPI on q_vectors that have no rings

[ Upstream commit eec903769b4ea476591ffff73bb7359f14f38c51 ]

If ice driver has q_vectors w/ active NAPI that has no rings,
then this will result in a divide by zero error. To correct it
I am updating the driver code so that we only support NAPI on
q_vectors that have 1 or more rings allocated to them.

See commit 13a8cd191a2b ("i40e: Do not enable NAPI on q_vectors
that have no rings") for detail.

Signed-off-by: Young Xiao <YangX92@hotmail.com>
Acked-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: define proper net_device::neigh_priv_len

[ Upstream commit 31389b53b3e0b535867af9090a5d19ec64768d55 ]

Out of bound read reported by KASan.

i40iw_net_event() reads unconditionally 16 bytes from
neigh->primary_key while the memory allocated for
"neighbour" struct is evaluated in neigh_alloc() as

  tbl->entry_size + dev->neigh_priv_len

where "dev" is a net_device.

But the driver does not setup dev->neigh_priv_len and
we read beyond the neigh entry allocated memory,
so the patch in the next mail fixes this.

Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: fbmem: behave better with small rotated displays and many CPUs

[ Upstream commit f75df8d4b4fabfad7e3cba2debfad12741c6fde7 ]

Blitting an image with "negative" offsets is not working since there
is no clipping. It hopefully just crashes. For the bootup logo, there
is protection so that blitting does not happen as the image is drawn
further and further to the right (ROTATE_UR) or further and further
down (ROTATE_CW). There is however no protection when drawing in the
opposite directions (ROTATE_UD and ROTATE_CCW).

Add back this protection.

The regression is 20-odd years old but the mindless warning-killing
mentality displayed in commit 34bdb666f4b2 ("fbdev: fbmem: remove
positive test on unsigned values") is also to blame, methinks.

Fixes: 448d479747b8 ("fbdev: fb_do_show_logo() updates")
Signed-off-by: Peter Rosin <peda@axentia.se>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Fabian Frederick <ffrederick@users.sourceforge.net>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
cc: Geoff Levand <geoff@infradead.org>
Cc: James Simmons <jsimmons@users.sf.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: fix raid10 hang issue caused by barrier

[ Upstream commit e820d55cb99dd93ac2dc949cf486bb187e5cd70d ]

When both regular IO and resync IO happen at the same time,
and if we also need to split regular. Then we can see tasks
hang due to barrier.

1. resync thread
[ 1463.757205] INFO: task md1_resync:5215 blocked for more than 480 seconds.
[ 1463.757207]       Not tainted 4.19.5-1-default #1
[ 1463.757209] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1463.757212] md1_resync      D    0  5215      2 0x80000000
[ 1463.757216] Call Trace:
[ 1463.757223]  ? __schedule+0x29a/0x880
[ 1463.757231]  ? raise_barrier+0x8d/0x140 [raid10]
[ 1463.757236]  schedule+0x78/0x110
[ 1463.757243]  raise_barrier+0x8d/0x140 [raid10]
[ 1463.757248]  ? wait_woken+0x80/0x80
[ 1463.757257]  raid10_sync_request+0x1f6/0x1e30 [raid10]
[ 1463.757265]  ? _raw_spin_unlock_irq+0x22/0x40
[ 1463.757284]  ? is_mddev_idle+0x125/0x137 [md_mod]
[ 1463.757302]  md_do_sync.cold.78+0x404/0x969 [md_mod]
[ 1463.757311]  ? wait_woken+0x80/0x80
[ 1463.757336]  ? md_rdev_init+0xb0/0xb0 [md_mod]
[ 1463.757351]  md_thread+0xe9/0x140 [md_mod]
[ 1463.757358]  ? _raw_spin_unlock_irqrestore+0x2e/0x60
[ 1463.757364]  ? __kthread_parkme+0x4c/0x70
[ 1463.757369]  kthread+0x112/0x130
[ 1463.757374]  ? kthread_create_worker_on_cpu+0x40/0x40
[ 1463.757380]  ret_from_fork+0x3a/0x50

2. regular IO
[ 1463.760679] INFO: task kworker/0:8:5367 blocked for more than 480 seconds.
[ 1463.760683]       Not tainted 4.19.5-1-default #1
[ 1463.760684] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1463.760687] kworker/0:8     D    0  5367      2 0x80000000
[ 1463.760718] Workqueue: md submit_flushes [md_mod]
[ 1463.760721] Call Trace:
[ 1463.760731]  ? __schedule+0x29a/0x880
[ 1463.760741]  ? wait_barrier+0xdd/0x170 [raid10]
[ 1463.760746]  schedule+0x78/0x110
[ 1463.760753]  wait_barrier+0xdd/0x170 [raid10]
[ 1463.760761]  ? wait_woken+0x80/0x80
[ 1463.760768]  raid10_write_request+0xf2/0x900 [raid10]
[ 1463.760774]  ? wait_woken+0x80/0x80
[ 1463.760778]  ? mempool_alloc+0x55/0x160
[ 1463.760795]  ? md_write_start+0xa9/0x270 [md_mod]
[ 1463.760801]  ? try_to_wake_up+0x44/0x470
[ 1463.760810]  raid10_make_request+0xc1/0x120 [raid10]
[ 1463.760816]  ? wait_woken+0x80/0x80
[ 1463.760831]  md_handle_request+0x121/0x190 [md_mod]
[ 1463.760851]  md_make_request+0x78/0x190 [md_mod]
[ 1463.760860]  generic_make_request+0x1c6/0x470
[ 1463.760870]  raid10_write_request+0x77a/0x900 [raid10]
[ 1463.760875]  ? wait_woken+0x80/0x80
[ 1463.760879]  ? mempool_alloc+0x55/0x160
[ 1463.760895]  ? md_write_start+0xa9/0x270 [md_mod]
[ 1463.760904]  raid10_make_request+0xc1/0x120 [raid10]
[ 1463.760910]  ? wait_woken+0x80/0x80
[ 1463.760926]  md_handle_request+0x121/0x190 [md_mod]
[ 1463.760931]  ? _raw_spin_unlock_irq+0x22/0x40
[ 1463.760936]  ? finish_task_switch+0x74/0x260
[ 1463.760954]  submit_flushes+0x21/0x40 [md_mod]

So resync io is waiting for regular write io to complete to
decrease nr_pending (conf->barrier++ is called before waiting).
The regular write io splits another bio after call wait_barrier
which call nr_pending++, then the splitted bio would continue
with raid10_write_request -> wait_barrier, so the splitted bio
has to wait for barrier to be zero, then deadlock happens as
follows.

resync io regular io

raise_barrier
wait_barrier
generic_make_request
wait_barrier

To resolve the issue, we need to call allow_barrier to decrease
nr_pending before generic_make_request since regular IO is not
issued to underlying devices, and wait_barrier is called again
to ensure no internal IO happening.

Fixes: fc9977dd069e ("md/raid10: simplify the splitting of requests.")
Reported-and-tested-by: Siniša Bandin <sinisa@4net.rs>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: clps711x-fb: release disp device node in probe()

[ Upstream commit fdac751355cd76e049f628afe6acb8ff4b1399f7 ]

clps711x_fb_probe() increments refcnt of disp device node by
of_parse_phandle() and leaves it undecremented on both
successful and error paths.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: validate extended dongle caps

[ Upstream commit 99b922f9ed6a6313c0d2247cde8aa1e4a0bd67e4 ]

[why]
Some dongle doesn't have a valid extended dongle caps,
but we still set the extended dongle caps to be valid.
This causes validation fails for all timing.

[how]
If no dp_hdmi_max_pixel_clk is provided,
don't use extended dongle caps.

Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: Avoid Clang warning about pointless switch statment

[ Upstream commit a52c5a16cf19d8a85831bb1b915a221dd4ffae3c ]

There are several warnings from Clang about no case statement matching
the constant 0:

In file included from drivers/block/drbd/drbd_receiver.c:48:
In file included from drivers/block/drbd/drbd_int.h:48:
In file included from ./include/linux/drbd_genl_api.h:54:
In file included from ./include/linux/genl_magic_struct.h:236:
./include/linux/drbd_genl.h:321:1: warning: no case matching constant
switch condition '0'
GENL_struct(DRBD_NLA_HELPER, 24, drbd_helper_info,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/genl_magic_struct.h:220:10: note: expanded from macro
'GENL_struct'
        switch (0) {
                ^

Silence this warning by adding a 'case 0:' statement. Additionally,
adjust the alignment of the statements in the ct_assert_unique macro to
avoid a checkpatch warning.

This solution was originally sent by Arnd Bergmann with a default case
statement: https://lore.kernel.org/patchwork/patch/756723/

Link: https://github.com/ClangBuiltLinux/linux/issues/43
Suggested-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: skip spurious timeout (ping-timeo) when failing promote

[ Upstream commit 9848b6ddd8c92305252f94592c5e278574e7a6ac ]

If you try to promote a Secondary while connected to a Primary
and allow-two-primaries is NOT set, we will wait for "ping-timeout"
to give this node a chance to detect a dead primary,
in case the cluster manager noticed faster than we did.

But if we then are *still* connected to a Primary,
we fail (after an additional timeout of ping-timout).

This change skips the spurious second timeout.

Most people won't notice really,
since "ping-timeout" by default is half a second.

But in some installations, ping-timeout may be 10 or 20 seconds or more,
and spuriously delaying the error return becomes annoying.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: disconnect, if the wrong UUIDs are attached on a connected peer

[ Upstream commit b17b59602b6dcf8f97a7dc7bc489a48388d7063a ]

With "on-no-data-accessible suspend-io", DRBD requires the next attach
or connect to be to the very same data generation uuid tag it lost last.

If we first lost connection to the peer,
then later lost connection to our own disk,
we would usually refuse to re-connect to the peer,
because it presents the wrong data set.

However, if the peer first connects without a disk,
and then attached its disk, we accepted that same wrong data set,
which would be "unexpected" by any user of that DRBD
and cause "undefined results" (read: very likely data corruption).

The fix is to forcefully disconnect as soon as we notice that the peer
attached to the "wrong" dataset.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: narrow rcu_read_lock in drbd_sync_handshake

[ Upstream commit d29e89e34952a9ad02c77109c71a80043544296e ]

So far there was the possibility that we called
genlmsg_new(GFP_NOIO)/mutex_lock() while holding an rcu_read_lock().

This included cases like:

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      drbd_bcast_event
        genlmsg_new(GFP_NOIO) --> may sleep

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      notify_helper
        genlmsg_new(GFP_NOIO) --> may sleep

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      notify_helper
        mutex_lock --> may sleep

While using GFP_ATOMIC whould have been possible in the first two cases,
the real fix is to narrow the rcu_read_lock.

Reported-by: Jia-Ju Bai <baijiaju1990@163.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlx5: update timecounter at least twice per counter overflow

[ Upstream commit 5d8678365c90b9ce1fd2243ff5ea562609f6cec1 ]

The timecounter needs to be updated at least once in half of the
cyclecounter interval to prevent timecounter_cyc2time() interpreting a
new timestamp as an old value and causing a backward jump.

This would be an issue if the timecounter multiplier was so small that
the update interval would not be limited by the 64-bit overflow in
multiplication.

Shorten the calculated interval to make sure the timecounter is updated
in time even when the system clock is slowed down by up to 10%, the
multiplier is increased by up to 10%, and the scheduled overflow check
is late by 15%.

Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ariel Levkovich <lariel@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/powernv/ioda: Allocate indirect TCE levels of cached userspace addresses on demand

[ Upstream commit bdbf649efe21173cae63b4b71db84176420f9039 ]

The powernv platform maintains 2 TCE tables for VFIO - a hardware TCE
table and a table with userspace addresses; the latter is used for
marking pages dirty when corresponging TCEs are unmapped from
the hardware table.

a68bd1267b72 ("powerpc/powernv/ioda: Allocate indirect TCE levels
on demand") enabled on-demand allocation of the hardware table,
however it missed the other table so it has still been fully allocated
at the boot time. This fixes the issue by allocating a single level,
just like we do for the hardware table.

Fixes: a68bd1267b72 ("powerpc/powernv/ioda: Allocate indirect TCE levels on demand")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: fix setting HE ppe FW config

[ Upstream commit 189b8d441b0f7825f0b4278851c52afaa0515ed2 ]

The FW expects to get the ppe value for each NSS-BW pair in the same
format as in the he phy capabilities IE, which means that a value of 0
implies ppe should be used for BPSK (mcs 0). If there are no PPE
thresholds in the IE, or if for some NSS-RU pair there's no threshold
set for it (this could happen because it's a variable-sized field), it
means no PPE should not be used for that pair, so the value sent to FW
should be 7 which corresponds to "none".

Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax")
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/perf: Fix thresholding counter data for unknown type

[ Upstream commit 17cfccc91545682513541924245abb876d296063 ]

MMCRA[34:36] and MMCRA[38:44] expose the thresholding counter value.
Thresholding counter can be used to count latency cycles such as
load miss to reload. But threshold counter value is not relevant
when the sampled instruction type is unknown or reserved. Patch to
fix the thresholding counter value to zero when sampled instruction
type is unknown or reserved.

Fixes: 170a315f41c6('powerpc/perf: Support to export MMCRA[TEC*] field to userspace')
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add max vector number check for pf

[ Upstream commit 75edb610860fda65ceedb017fc69afabd2806b8b ]

Each pf supports max 64 vectors and 128 tqps. For 2p/4p core scenario,
there may be more than 64 cpus online. So the result of min_t(u16,
num_Online_cpus(), tqp_num) may be more than 64. This patch adds check
for the vector number.

Fixes: dd38c72604dc ("net: hns3: fix for coalesce configuration lost during reset")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan()

[ Upstream commit 4f68ef64cd7feb1220232bd8f501d8aad340a099 ]

The function cw1200_bss_info_changed() and cw1200_hw_scan() can be
concurrently executed.
The two functions both access a possible shared variable "frame.skb".

This shared variable is freed by dev_kfree_skb() in cw1200_upload_beacon(),
which is called by cw1200_bss_info_changed(). The free operation is
protected by a mutex lock "priv->conf_mutex" in cw1200_bss_info_changed().

In cw1200_hw_scan(), this shared variable is accessed without the
protection of the mutex lock "priv->conf_mutex".
Thus, concurrency use-after-free bugs may occur.

To fix these bugs, the original calls to mutex_lock(&priv->conf_mutex) and
mutex_unlock(&priv->conf_mutex) are moved to the places, which can
protect the accesses to the shared variable.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: smartpqi: increase fw status register read timeout

[ Upstream commit 65111785acccb836ec75263b03b0e33f21e74f47 ]

Problem:
 - during the driver initialization, driver will poll fw
   for KERNEL_UP in a 30 seconds timeout.

 - if the firmware is not ready after 30 seconds,
   driver will not be loaded.

Fix:
 - change timeout from 30 seconds to 3 minutes.

Reported-by: Feng Li <lifeng1519@gmail.com>
Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com>
Reviewed-by: Murthy Bhat <Murthy.Bhat@microsemi.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: smartpqi: correct volume status

[ Upstream commit 7ff44499bafbd376115f0bb6b578d980f56ee13b ]

- fix race condition when a unit is deleted after an RLL,
  and before we have gotten the LV_STATUS page of the unit.
  - In this case we will get a standard inquiry, rather than
    the desired page.  This will result in a unit presented
    which no longer exists.
  - If we ask for LV_STATUS, insure we get LV_STATUS

Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com>
Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: smartpqi: correct host serial num for ssa

[ Upstream commit b2346b5030cf9458f30a84028d9fe904b8c942a7 ]

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com>
Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com>
Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: spectrum: Properly cleanup LAG uppers when removing port from LAG

[ Upstream commit be2d6f421f680e01d58f7cd452646e0d8586d49b ]

When a LAG device or a VLAN device on top of it is enslaved to a bridge,
the driver propagates the CHANGEUPPER event to the LAG's slaves.

This causes each physical port to increase the reference count of the
internal representation of the bridge port by calling
mlxsw_sp_port_bridge_join().

However, when a port is removed from a LAG, the corresponding leave()
function is not called and the reference count is not decremented. This
leads to ugly hacks such as mlxsw_sp_bridge_port_should_destroy() that
try to understand if the bridge port should be destroyed even when its
reference count is not 0.

Instead, make sure that when a port is unlinked from a LAG it would see
the same events as if the LAG (or its uppers) were unlinked from a
bridge.

The above is achieved by walking the LAG's uppers when a port is
unlinked and calling mlxsw_sp_port_bridge_leave() for each upper that is
enslaved to a bridge.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm6_tunnel: Fix spi check in __xfrm6_tunnel_alloc_spi

[ Upstream commit fa89a4593b927b3f59c3b69379f31d3b22272e4e ]

gcc warn this:

net/ipv6/xfrm6_tunnel.c:143 __xfrm6_tunnel_alloc_spi() warn:
 always true condition '(spi <= 4294967295) => (0-u32max <= u32max)'

'spi' is u32, which always not greater than XFRM6_TUNNEL_SPI_MAX
because of wrap around. So the second forloop will never reach.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix radiotap vendor presence bitmap handling

[ Upstream commit efc38dd7d5fa5c8cdd0c917c5d00947aa0539443 ]

Due to the alignment handling, it actually matters where in the code
we add the 4 bytes for the presence bitmap to the length; the first
field is the timestamp with 8 byte alignment so we need to add the
space for the extra vendor namespace presence bitmap *before* we do
any alignment for the fields.

Move the presence bitmap length accounting to the right place to fix
the alignment for the data properly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/uaccess: fix warning/error with access_ok()

[ Upstream commit 05a4ab823983d9136a460b7b5e0d49ee709a6f86 ]

With the following piece of code, the following compilation warning
is encountered:

if (_IOC_DIR(ioc) != _IOC_NONE) {
int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ;

if (!access_ok(verify, ioarg, _IOC_SIZE(ioc))) {

drivers/platform/test/dev.c: In function 'my_ioctl':
drivers/platform/test/dev.c:219:7: warning: unused variable 'verify' [-Wunused-variable]
   int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ;

This patch fixes it by referencing 'type' in the macro allthough
doing nothing with it.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fix YCbCr420 blank color

[ Upstream commit 12750d1647f118496f1da727146f255f5e44d500 ]

[Why]
YCbCr420 packing format uses two chanels for luma, and 1
channel for both chroma component. Our previous implementation
did not account for this and results in every other pixel having
very high luma value, showing greyish color instead of black.

YCbCr444 = <Y1, Cb1, Cr1>; <Y2, Cb2, Cr2> .....
YCbCr420 = <Y1, Y2,  Cb1>; <Y3, Y4,  Cr1> .....

[How]
Program the second channel with the black color value for luma
as well.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Hugo Hu <Hugo.Hu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_bcm: Handle deferred probing for the clock supply

[ Upstream commit 28ac03b9ac3f784c2f048a910c8d0a7a87483b66 ]

On some systems that actually have the bluetooth controller wired up
with an extra clock signal, it's possible the bluetooth controller
probes before the clock provider. clk_get would return a defer probe
error, which was not handled by this driver.

Handle this properly, so that these systems can work reliably.

Tested-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Add retry to read ddc_clock pin

[ Upstream commit bd4905a9583c760da31ded7256dca6f71483c3dc ]

[WHY]
On customer board, there is one pluse (1v , < 1ms) on
DDC_CLK pin when plug / unplug DP cable. Driver will read
it and config DP to HDMI/DVI dongle.

[HOW]
If there is a real dongle, DDC_CLK should be always pull high.
Try to read again to recovery this special case. Retry times = 3.
Need additional 3ms to detect DP passive dongle(3 failures)

Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix incomplete uninitialization of IRQ in the hns3_nic_uninit_vector_data()

[ Upstream commit ae6017a71115ebc4e5c1a3f0f451319ab3f5c447 ]

In the hns3_nic_uninit_vector_data(), the procedure of uninitializing
the tqp_vector's IRQ has not set affinity_notify to NULL and changes
its init flag. This patch fixes it. And for simplificaton, local
variable tqp_vector is used instead of priv->tqp_vector[i].

Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

percpu: convert spin_lock_irq to spin_lock_irqsave.

[ Upstream commit 6ab7d47bcbf0144a8cb81536c2cead4cde18acfe ]

From Michael Cree:
  "Bisection lead to commit b38d08f3181c ("percpu: restructure
   locking") as being the cause of lockups at initial boot on
   the kernel built for generic Alpha.

   On a suggestion by Tejun Heo that:

   So, the only thing I can think of is that it's calling
   spin_unlock_irq() while irq handling isn't set up yet.
   Can you please try the followings?

   1. Convert all spin_[un]lock_irq() to
      spin_lock_irqsave/unlock_irqrestore()."

Fixes: b38d08f3181c ("percpu: restructure locking")
Reported-and-tested-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Cast off_t to s64 to avoid warning on bionic libc

[ Upstream commit 866053bb644f754d1a93aaa9db9998fecf7a8978 ]

To avoid this warning:

    CC       /tmp/build/perf/util/s390-cpumsf.o
  util/s390-cpumsf.c: In function 's390_cpumsf_samples':
  util/s390-cpumsf.c:508:3: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'off_t' [-Wformat=]
     pr_err("[%#08" PRIx64 "] Invalid AUX trailer entry TOD clock base\n",
     ^

Now the various Android cross toolchains used in the perf tools
container test builds are all clean and we can remove this:

  export EXTRA_MAKE_ARGS="WERROR=0"

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lkml.kernel.org/n/tip-5rav4ccyb0sjciysz2i4p3sx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf header: Fix up argument to ctime()

[ Upstream commit 0afcf29bab35d3785204cd9bd51693b231ad7181 ]

Reducing this noise when cross building to the Android NDK:

  util/header.c: In function 'perf_header__fprintf_info':
  util/header.c:2710:45: warning: pointer targets in passing argument 1 of 'ctime' differ in signedness [-Wpointer-sign]
    fprintf(fp, "# captured on    : %s", ctime(&st.st_ctime));
                                               ^
  In file included from util/../perf.h:5:0,
                   from util/evlist.h:11,
                   from util/header.c:22:
  /opt/android-ndk-r15c/platforms/android-26/arch-arm/usr/include/time.h:81:14: note: expected 'const time_t *' but argument is of type 'long unsigned int *'
   extern char* ctime(const time_t*) __LIBC_ABI_PUBLIC__;
                ^

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-6bz74zp080yhmtiwb36enso9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: dsps: fix runtime pm for peripheral mode

[ Upstream commit 54578ee883e34d2d1c518d48f1c1e2dd3f387188 ]

Since the runtime PM support was added in musb, dsps relies on the timer
calling otg_timer() to activate the usb subsystem. However the driver
doesn't enable the timer for peripheral port, then the peripheral port is
unable to be enumerated by a host if the other usb port is disabled or in
peripheral mode too.

So let's start the timer for peripheral port too.

Fixes: ea2f35c01d5e ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: dsps: fix otg state machine

[ Upstream commit 6010abf2c2c0e382d7e8ee44bd11f343aae90cce ]

Due to lack of ID pin interrupt event on AM335x devices, the musb dsps
driver uses polling to detect usb device attach for dual-role port.

But in the case if a micro-A cable adapter is attached without a USB device
attached to the cable, the musb state machine gets stuck in a_wait_vrise
state waiting for the MUSB_CONNECT interrupt which won't happen due to the
usb device is not attached. The state is stuck in a_wait_vrise even after
the micro-A cable is detached, which could cause VBUS retention if then the
dual-role port is attached to a host port.

To fix the problem, make a_wait_vrise as a transient state, then move the
state to either a_wait_bcon for host port or a_idle state for dual-role
port, if no usb device is attached to the port.

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: KVM: Skip MMIO insn after emulation

[ Upstream commit 0d640732dbebed0f10f18526de21652931f0b2f2 ]

When we emulate an MMIO instruction, we advance the CPU state within
decode_hsr(), before emulating the instruction effects.

Having this logic in decode_hsr() is opaque, and advancing the state
before emulation is problematic. It gets in the way of applying
consistent single-step logic, and it prevents us from being able to fail
an MMIO instruction with a synchronous exception.

Clean this up by only advancing the CPU state *after* the effects of the
instruction are emulated.

Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

livepatch: check kzalloc return values

[ Upstream commit 5f30b2e823484ce6a79f2b59901b6351c15effa6 ]

kzalloc() return should always be checked - notably in example code
where this may be seen as reference. On failure of allocation in
livepatch_fix1_dummy_alloc() respectively dummy_alloc() previous
allocation is freed (thanks to Petr Mladek <pmladek@suse.com> for
catching this) and NULL returned.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 439e7271dc2b ("livepatch: introduce shadow variable API")
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/power/x86/intel_pstate_tracer: Fix non root execution for post processing a trace file

[ Upstream commit 663546903c835fe46308b1b1e53d32d1f2b33da9 ]

This script is supposed to be allowed to run with regular user
privileges if a previously captured trace is being post processed.

Commit fbe313884d7d (tools/power/x86/intel_pstate_tracer: Free the
trace buffer memory) introduced a bug that breaks that option.

Commit 35459105deb2 (tools/power/x86/intel_pstate_tracer: Add
optional setting of trace buffer memory allocation) moved the code
but kept the bug.

This patch fixes the issue.

Fixes: 35459105deb2 (tools/power/x86/intel_pstate_tracer: Add optional ...)
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Disable MSIX before re-reserving NQs/CMPL rings.

[ Upstream commit 36d65be9a88052cdfc8524eb591baf0e6c878408 ]

When bringing up a device, the code checks to see if the number of
MSIX has changed.  pci_disable_msix() should be called first before
changing the number of reserved NQs/CMPL rings.  This ensures that
the MSIX vectors associated with the NQs/CMPL rings are still
properly mapped when pci_disable_msix() masks the vectors.

This patch will prevent errors when RDMA support is added for the new
57500 chips.  When the RDMA driver shuts down, the number of NQs is
decreased and we must use the new sequence to prevent MSIX errors.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E)

[ Upstream commit 51243b73455f2d12cb82abffa7bc9028aec656e0 ]

Similarly to R-Car E3, RZ/G2E doesn't come with automatic
transmission registers, as such it is not considered compatible
with the existing fallback bindings.

Add SoC specific binding compatibility to allow for later
support for automatic transmission.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf probe: Fix unchecked usage of strncpy()

[ Upstream commit bef0b8970f27da5ca223e522a174d03e2587761d ]

The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.

In this case the 'target' buffer is coming from a list of build-ids that
are expected to have a len of at most (SBUILD_ID_SIZE - 1) chars, so
probably we're safe, but since we're using strncpy() here, use strlcpy()
instead to provide the intended safety checking without the using the
problematic strncpy() function.

This fixes this warning on an Alpine Linux Edge system with gcc 8.2:

  util/probe-file.c: In function 'probe_cache__open.isra.5':
  util/probe-file.c:427:3: error: 'strncpy' specified bound 41 equals destination size [-Werror=stringop-truncation]
     strncpy(sbuildid, target, SBUILD_ID_SIZE);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 1f3736c9c833 ("perf probe: Show all cached probes")
Link: https://lkml.kernel.org/n/tip-l7n8ggc9kl38qtdlouke5yp5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: use tagged writepage to mitigate livelock of snapshot

[ Upstream commit 3cd24c698004d2f7668e0eb9fc1f096f533c791b ]

Snapshot is expected to be fast. But if there are writers steadily
creating dirty pages in our subvolume, the snapshot may take a very long
time to complete. To fix the problem, we use tagged writepage for
snapshot flusher as we do in the generic write_cache_pages(), so we can
omit pages dirtied after the snapshot command.

This does not change the semantics regarding which data get to the
snapshot, if there are pages being dirtied during the snapshotting
operation.  There's a sync called before snapshot is taken in old/new
case, any IO in flight just after that may be in the snapshot but this
depends on other system effects that might still sync the IO.

We do a simple snapshot speed test on a Intel D-1531 box:

fio --ioengine=libaio --iodepth=32 --bs=4k --rw=write --size=64G
--direct=0 --thread=1 --numjobs=1 --time_based --runtime=120
--filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5;
time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio

original: 1m58sec
patched:  6.54sec

This is the best case for this patch since for a sequential write case,
we omit nearly all pages dirtied after the snapshot command.

For a multi writers, random write test:

fio --ioengine=libaio --iodepth=32 --bs=4k --rw=randwrite --size=64G
--direct=0 --thread=1 --numjobs=4 --time_based --runtime=120
--filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5;
time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio

original: 15.83sec
patched:  10.35sec

The improvement is smaller compared to the sequential write case,
since we omit only half of the pages dirtied after snapshot command.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Ethan Lien <ethanlien@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf header: Fix unchecked usage of strncpy()

[ Upstream commit 7572588085a13d5db02bf159542189f52fdb507e ]

The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.

This fixes this warning on an Alpine Linux Edge system with gcc 8.2:

  util/header.c: In function 'perf_event__synthesize_event_update_unit':
  util/header.c:3586:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
    strncpy(ev->data, evsel->unit, size);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  util/header.c:3579:16: note: length computed here
    size_t size = strlen(evsel->unit);
                  ^~~~~~~~~~~~~~~~~~~

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: a6e5281780d1 ("perf tools: Add event_update event unit type")
Link: https://lkml.kernel.org/n/tip-fiikh5nay70bv4zskw2aa858@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf dso: Fix unchecked usage of strncpy()

[ Upstream commit fca5085c15255bbde203b7322c15f07ebb12f63e ]

The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.

This fixes this warning on an Alpine Linux Edge system with gcc 8.2:

  In function 'decompress_kmodule',
      inlined from 'dso__decompress_kmodule_fd' at util/dso.c:305:9:
  util/dso.c:298:3: error: 'strncpy' destination unchanged after copying no bytes [-Werror=stringop-truncation]
     strncpy(pathname, tmpbuf, len);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CC       /tmp/build/perf/util/values.o
    CC       /tmp/build/perf/util/debug.o
  cc1: all warnings being treated as errors

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: c9a8a6131fb6 ("perf tools: Move the temp file processing into decompress_kmodule")
Link: https://lkml.kernel.org/n/tip-tl2hdxj64tt4k8btbi6a0ugw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test: Fix perf_event_attr test failure

[ Upstream commit 741dad88dde296999da30332157ca47f0543747d ]

Fix inconsistent use of tabs and spaces error:

  # perf test 16 -v
  16: Setup struct perf_event_attr                          :
  --- start ---
  test child forked, pid 20224
    File "/usr/libexec/perf-core/tests/attr.py", line 119
      log.warning("expected %s=%s, got %s" % (t, self[t], other[t]))
                                                                 ^
  TabError: inconsistent use of tabs and spaces in indentation
  test child finished with -1
  ---- end ----
  Setup struct perf_event_attr: FAILED!

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181122140456.16817-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: samsung: Properly set flags in autoCTS mode

[ Upstream commit 31e933645742ee6719d37573a27cce0761dcf92b ]

Commit 391f93f2ec9f ("serial: core: Rework hw-assited flow control support")
has changed the way the autoCTS mode is handled.

According to that change, serial drivers which enable H/W autoCTS mode must
set UPSTAT_AUTOCTS to prevent the serial core from inadvertently disabling
TX. This patch adds proper handling of UPSTAT_AUTOCTS flag.

Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
[mszyprow: rephrased commit message]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failure

[ Upstream commit 71ab1c0336c71ace5725740f200beca9667a339f ]

On (H)SCIF, sci_submit_rx() is called in the receive interrupt handler.
Hence if DMA submission fails, the interrupt handler should resume
handling reception using PIO, else no more data is received.

Make sci_submit_rx() return an error indicator, so the receive interrupt
handler can act appropriately.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: sh-sci: Fix locking in sci_submit_rx()

[ Upstream commit dd1f2250da95e87cb3e612858f94b14f99445a7c ]

Some callers of sci_submit_rx() hold the port spinlock, others don't.
During fallback to PIO, the driver needs to obtain the port spinlock.
If the lock was already held, spinlock recursion is detected, causing a
deadlock: BUG: spinlock recursion on CPU#0.

Fix this by adding a flag parameter to sci_submit_rx() for the caller to
indicate the port spinlock is already held, so spinlock recursion can be
avoided.

Move the spin_lock_irqsave() up, so all DMA disable steps are protected,
which is safe as the recently introduced dmaengine_terminate_async() can
be called in atomic context.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: harden agaist duplicate fsid on scanned devices

[ Upstream commit a9261d4125c97ce8624e9941b75dee1b43ad5df9 ]

It's not that impossible to imagine that a device OR a btrfs image is
copied just by using the dd or the cp command. Which in case both the
copies of the btrfs will have the same fsid. If on the system with
automount enabled, the copied FS gets scanned.

We have a known bug in btrfs, that we let the device path be changed
after the device has been mounted. So using this loop hole the new
copied device would appears as if its mounted immediately after it's
been copied.

For example:

Initially.. /dev/mmcblk0p4 is mounted as /

  $ lsblk
  NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
  mmcblk0     179:0    0 29.2G  0 disk
  |-mmcblk0p4 179:4    0    4G  0 part /
  |-mmcblk0p2 179:2    0  500M  0 part /boot
  |-mmcblk0p3 179:3    0  256M  0 part [SWAP]
  `-mmcblk0p1 179:1    0  256M  0 part /boot/efi

  $ btrfs fi show
     Label: none  uuid: 07892354-ddaa-4443-90ea-f76a06accaba
     Total devices 1 FS bytes used 1.40GiB
     devid    1 size 4.00GiB used 3.00GiB path /dev/mmcblk0p4

Copy mmcblk0 to sda

  $ dd if=/dev/mmcblk0 of=/dev/sda

And immediately after the copy completes the change in the device
superblock is notified which the automount scans using btrfs device scan
and the new device sda becomes the mounted root device.

  $ lsblk
  NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
  sda           8:0    1 14.9G  0 disk
  |-sda4        8:4    1    4G  0 part /
  |-sda2        8:2    1  500M  0 part
  |-sda3        8:3    1  256M  0 part
  `-sda1        8:1    1  256M  0 part
  mmcblk0     179:0    0 29.2G  0 disk
  |-mmcblk0p4 179:4    0    4G  0 part
  |-mmcblk0p2 179:2    0  500M  0 part /boot
  |-mmcblk0p3 179:3    0  256M  0 part [SWAP]
  `-mmcblk0p1 179:1    0  256M  0 part /boot/efi

  $ btrfs fi show /
    Label: none  uuid: 07892354-ddaa-4443-90ea-f76a06accaba
    Total devices 1 FS bytes used 1.40GiB
    devid    1 size 4.00GiB used 3.00GiB path /dev/sda4

The bug is quite nasty that you can't either unmount /dev/sda4 or
/dev/mmcblk0p4. And the problem does not get solved until you take sda
out of the system on to another system to change its fsid using the
'btrfstune -u' command.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: renesas_usbhs: add support for RZ/G2E

[ Upstream commit 1d6e81a288e28d8d0e38e0501a324216f79bba35 ]

HS-USB found in RZ/G2E (a.k.a. r8a774c0) is very similar to the
one found in R-Car E3 (a.k.a. r8a77990), as it needs to release
the PLL reset by the UGCTRL register like R-Car E3, therefore add
r8a774c0 support in a similar fashion to what was done for the
r8a77990.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: jz4740: Get CD/WP GPIOs from descriptors

[ Upstream commit 0c901c0566fb4edc2631c3786e5085a037be91f8 ]

Modifty the JZ4740 driver to retrieve card detect and write
protect GPIO pins from GPIO descriptors instead of hard-coded
global numbers. Augment the only board file using this in the
process and cut down on passed in platform data.

Preserve the code setting the caps2 flags for CD and WP
as active low or high since the slot GPIO code currently
ignores the gpiolib polarity inversion semantice and uses
the raw accessors to read the GPIO lines, but set the right
polarity flags in the descriptor table for jz4740.

Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@linux-mips.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-xenon: Fix timeout checks

[ Upstream commit 0e6e7c2ff397e1bbebc882ca3132148aaaef1ddd ]

Always check the wait condition before returning timeout.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Zhoujie Wu <zjwu@marvell.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-omap: Fix timeout checks

[ Upstream commit 9f0ea0bda1d06120b053bb0c283f54afec59293d ]

Always check the wait condition before returning timeout.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>