Eric Dumazet [Sun, 10 Mar 2019 16:07:14 +0000 (09:07 -0700)]
net/x25: fix use-after-free in x25_device_event()
[ Upstream commit
95d6ebd53c79522bf9502dbc7e89e0d63f94dae4 ]
In case of failure x25_connect() does a x25_neigh_put(x25->neighbour)
but forgets to clear x25->neighbour pointer, thus triggering use-after-free.
Since the socket is visible in x25_list, we need to hold x25_list_lock
to protect the operation.
syzbot report :
BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline]
BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
Read of size 8 at addr
ffff8880a030edd0 by task syz-executor003/7854
CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
x25_kill_by_device net/x25/af_x25.c:217 [inline]
x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
call_netdevice_notifiers net/core/dev.c:1765 [inline]
__dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607
dev_change_flags+0x10d/0x170 net/core/dev.c:7643
dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
sock_do_ioctl+0x1bd/0x300 net/socket.c:995
sock_ioctl+0x32b/0x610 net/socket.c:1096
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4467c9
Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007fdbea222d98 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
00000000006dbc58 RCX:
00000000004467c9
RDX:
0000000020000340 RSI:
0000000000008914 RDI:
0000000000000003
RBP:
00000000006dbc50 R08:
00007fdbea223700 R09:
0000000000000000
R10:
00007fdbea223700 R11:
0000000000000246 R12:
00000000006dbc5c
R13:
6000030030626669 R14:
0000000000000000 R15:
0000000030626669
Allocated by task 7843:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc mm/kasan/common.c:495 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509
kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615
kmalloc include/linux/slab.h:545 [inline]
x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249
x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242
notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
call_netdevice_notifiers net/core/dev.c:1765 [inline]
__dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605
dev_change_flags+0x10d/0x170 net/core/dev.c:7643
dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
sock_do_ioctl+0x1bd/0x300 net/socket.c:995
sock_ioctl+0x32b/0x610 net/socket.c:1096
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 7865:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:457
kasan_slab_free+0xe/0x10 mm/kasan/common.c:465
__cache_free mm/slab.c:3494 [inline]
kfree+0xcf/0x230 mm/slab.c:3811
x25_neigh_put include/net/x25.h:253 [inline]
x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824
__sys_connect+0x266/0x330 net/socket.c:1685
__do_sys_connect net/socket.c:1696 [inline]
__se_sys_connect net/socket.c:1693 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1693
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at
ffff8880a030edc0
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 16 bytes inside of
256-byte region [
ffff8880a030edc0,
ffff8880a030eec0)
The buggy address belongs to the page:
page:
ffffea000280c380 count:1 mapcount:0 mapping:
ffff88812c3f07c0 index:0x0
flags: 0x1fffc0000000200(slab)
raw:
01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0
raw:
0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000
page dumped because: kasan: bad access detected
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+04babcefcd396fabec37@syzkaller.appspotmail.com
Cc: andrew hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaohe Lin [Mon, 11 Mar 2019 08:29:32 +0000 (16:29 +0800)]
net: sit: fix UBSAN Undefined behaviour in check_6rd
[ Upstream commit
a843dc4ebaecd15fca1f4d35a97210f72ea1473b ]
In func check_6rd,tunnel->ip6rd.relay_prefixlen may equal to
32,so UBSAN complain about it.
UBSAN: Undefined behaviour in net/ipv6/sit.c:781:47
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 6 PID: 20036 Comm: syz-executor.0 Not tainted 4.19.27 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1
04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
ubsan_epilogue+0xe/0x81 lib/ubsan.c:159
__ubsan_handle_shift_out_of_bounds+0x293/0x2e8 lib/ubsan.c:425
check_6rd.constprop.9+0x433/0x4e0 net/ipv6/sit.c:781
try_6rd net/ipv6/sit.c:806 [inline]
ipip6_tunnel_xmit net/ipv6/sit.c:866 [inline]
sit_tunnel_xmit+0x141c/0x2720 net/ipv6/sit.c:1033
__netdev_start_xmit include/linux/netdevice.h:4300 [inline]
netdev_start_xmit include/linux/netdevice.h:4309 [inline]
xmit_one net/core/dev.c:3243 [inline]
dev_hard_start_xmit+0x17c/0x780 net/core/dev.c:3259
__dev_queue_xmit+0x1656/0x2500 net/core/dev.c:3829
neigh_output include/net/neighbour.h:501 [inline]
ip6_finish_output2+0xa36/0x2290 net/ipv6/ip6_output.c:120
ip6_finish_output+0x3e7/0xa20 net/ipv6/ip6_output.c:154
NF_HOOK_COND include/linux/netfilter.h:278 [inline]
ip6_output+0x1e2/0x720 net/ipv6/ip6_output.c:171
dst_output include/net/dst.h:444 [inline]
ip6_local_out+0x99/0x170 net/ipv6/output_core.c:176
ip6_send_skb+0x9d/0x2f0 net/ipv6/ip6_output.c:1697
ip6_push_pending_frames+0xc0/0x100 net/ipv6/ip6_output.c:1717
rawv6_push_pending_frames net/ipv6/raw.c:616 [inline]
rawv6_sendmsg+0x2435/0x3530 net/ipv6/raw.c:946
inet_sendmsg+0xf8/0x5c0 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xc8/0x110 net/socket.c:631
___sys_sendmsg+0x6cf/0x890 net/socket.c:2114
__sys_sendmsg+0xf0/0x1b0 net/socket.c:2152
do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: linmiaohe <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 7 Mar 2019 17:36:33 +0000 (09:36 -0800)]
net/hsr: fix possible crash in add_timer()
[ Upstream commit
1e027960edfaa6a43f9ca31081729b716598112b ]
syzbot found another add_timer() issue, this time in net/hsr [1]
Let's use mod_timer() which is safe.
[1]
kernel BUG at kernel/time/timer.c:1136!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 15909 Comm: syz-executor.3 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
kobject: 'loop2' (
00000000f5629718): kobject_uevent_env
RIP: 0010:add_timer kernel/time/timer.c:1136 [inline]
RIP: 0010:add_timer+0x654/0xbe0 kernel/time/timer.c:1134
Code: 0f 94 c5 31 ff 44 89 ee e8 09 61 0f 00 45 84 ed 0f 84 77 fd ff ff e8 bb 5f 0f 00 e8 07 10 a0 ff e9 68 fd ff ff e8 ac 5f 0f 00 <0f> 0b e8 a5 5f 0f 00 0f 0b e8 9e 5f 0f 00 4c 89 b5 58 ff ff ff e9
RSP: 0018:
ffff8880656eeca0 EFLAGS:
00010246
kobject: 'loop2' (
00000000f5629718): fill_kobj_path: path = '/devices/virtual/block/loop2'
RAX:
0000000000040000 RBX:
1ffff1100caddd9a RCX:
ffffc9000c436000
RDX:
0000000000040000 RSI:
ffffffff816056c4 RDI:
ffff88806a2f6cc8
RBP:
ffff8880656eed58 R08:
ffff888067f4a300 R09:
ffff888067f4abc8
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff88806a2f6cc0
R13:
dffffc0000000000 R14:
0000000000000001 R15:
ffff8880656eed30
FS:
00007fc2019bf700(0000) GS:
ffff8880ae800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000738000 CR3:
0000000067e8e000 CR4:
00000000001406f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
hsr_check_announce net/hsr/hsr_device.c:99 [inline]
hsr_check_carrier_and_operstate+0x567/0x6f0 net/hsr/hsr_device.c:120
hsr_netdev_notify+0x297/0xa00 net/hsr/hsr_main.c:51
notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
call_netdevice_notifiers net/core/dev.c:1765 [inline]
dev_open net/core/dev.c:1436 [inline]
dev_open+0x143/0x160 net/core/dev.c:1424
team_port_add drivers/net/team/team.c:1203 [inline]
team_add_slave+0xa07/0x15d0 drivers/net/team/team.c:1933
do_set_master net/core/rtnetlink.c:2358 [inline]
do_set_master+0x1d4/0x230 net/core/rtnetlink.c:2332
do_setlink+0x966/0x3510 net/core/rtnetlink.c:2493
rtnl_setlink+0x271/0x3b0 net/core/rtnetlink.c:2747
rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192
netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485
rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925
sock_sendmsg_nosec net/socket.c:622 [inline]
sock_sendmsg+0xdd/0x130 net/socket.c:632
sock_write_iter+0x27c/0x3e0 net/socket.c:923
call_write_iter include/linux/fs.h:1869 [inline]
do_iter_readv_writev+0x5e0/0x8e0 fs/read_write.c:680
do_iter_write fs/read_write.c:956 [inline]
do_iter_write+0x184/0x610 fs/read_write.c:937
vfs_writev+0x1b3/0x2f0 fs/read_write.c:1001
do_writev+0xf6/0x290 fs/read_write.c:1036
__do_sys_writev fs/read_write.c:1109 [inline]
__se_sys_writev fs/read_write.c:1106 [inline]
__x64_sys_writev+0x75/0xb0 fs/read_write.c:1106
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457f29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007fc2019bec78 EFLAGS:
00000246 ORIG_RAX:
0000000000000014
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
0000000000457f29
RDX:
0000000000000001 RSI:
00000000200000c0 RDI:
0000000000000003
RBP:
000000000073bf00 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007fc2019bf6d4
R13:
00000000004c4a60 R14:
00000000004dd218 R15:
00000000ffffffff
Fixes:
f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Arvid Brodin <arvid.brodin@alten.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mao Wenan [Wed, 6 Mar 2019 14:45:01 +0000 (22:45 +0800)]
net: hsr: fix memory leak in hsr_dev_finalize()
[ Upstream commit
6caabe7f197d3466d238f70915d65301f1716626 ]
If hsr_add_port(hsr, hsr_dev, HSR_PT_MASTER) failed to
add port, it directly returns res and forgets to free the node
that allocated in hsr_create_self_node(), and forgets to delete
the node->mac_list linked in hsr->self_node_db.
BUG: memory leak
unreferenced object 0xffff8881cfa0c780 (size 64):
comm "syz-executor.0", pid 2077, jiffies
4294717969 (age 2415.377s)
hex dump (first 32 bytes):
e0 c7 a0 cf 81 88 ff ff 00 02 00 00 00 00 ad de ................
00 e6 49 cd 81 88 ff ff c0 9b 87 d0 81 88 ff ff ..I.............
backtrace:
[<
00000000e2ff5070>] hsr_dev_finalize+0x736/0x960 [hsr]
[<
000000003ed2e597>] hsr_newlink+0x2b2/0x3e0 [hsr]
[<
000000003fa8c6b6>] __rtnl_newlink+0xf1f/0x1600 net/core/rtnetlink.c:3182
[<
000000001247a7ad>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3240
[<
00000000e7d1b61d>] rtnetlink_rcv_msg+0x54e/0xb90 net/core/rtnetlink.c:5130
[<
000000005556bd3a>] netlink_rcv_skb+0x129/0x340 net/netlink/af_netlink.c:2477
[<
00000000741d5ee6>] netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
[<
00000000741d5ee6>] netlink_unicast+0x49a/0x650 net/netlink/af_netlink.c:1336
[<
000000009d56f9b7>] netlink_sendmsg+0x88b/0xdf0 net/netlink/af_netlink.c:1917
[<
0000000046b35c59>] sock_sendmsg_nosec net/socket.c:621 [inline]
[<
0000000046b35c59>] sock_sendmsg+0xc3/0x100 net/socket.c:631
[<
00000000d208adc9>] __sys_sendto+0x33e/0x560 net/socket.c:1786
[<
00000000b582837a>] __do_sys_sendto net/socket.c:1798 [inline]
[<
00000000b582837a>] __se_sys_sendto net/socket.c:1794 [inline]
[<
00000000b582837a>] __x64_sys_sendto+0xdd/0x1b0 net/socket.c:1794
[<
00000000c866801d>] do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
[<
00000000fea382d9>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<
00000000e01dacb3>] 0xffffffffffffffff
Fixes:
c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan Whitehead [Wed, 13 Mar 2019 19:55:48 +0000 (15:55 -0400)]
lan743x: Fix TX Stall Issue
[ Upstream commit
deb6bfabdbb634e91f36a4e9cb00a7137d72d886 ]
It has been observed that tx queue may stall while downloading
from certain web sites (example www.speedtest.net)
The cause has been tracked down to a corner case where
the tx interrupt vector was disabled automatically, but
was not re enabled later.
The lan743x has two mechanisms to enable/disable individual
interrupts. Interrupts can be enabled/disabled by individual
source, and they can also be enabled/disabled by individual
vector which has been mapped to the source. Both must be
enabled for interrupts to work properly.
The TX code path, primarily uses the interrupt enable/disable of
the TX source bit, while leaving the vector enabled all the time.
However, while investigating this issue it was noticed that
the driver requested the use of the vector auto clear feature.
The test above revealed a case where the vector enable was
cleared unintentionally.
This patch fixes the issue by deleting the lines that request
the vector auto clear feature to be used.
Fixes:
23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan Whitehead [Mon, 11 Mar 2019 17:39:39 +0000 (13:39 -0400)]
lan743x: Fix RX Kernel Panic
[ Upstream commit
dd9d9f5907bb475f8b1796c47d4ecc7fb9b72136 ]
It has been noticed that running the speed test at
www.speedtest.net occasionally causes a kernel panic.
Investigation revealed that under this test RX buffer allocation
sometimes fails and returns NULL. But the lan743x driver did
not handle this case.
This patch fixes this issue by attempting to allocate a buffer
before sending the new rx packet to the OS. If the allocation
fails then the new rx packet is dropped and the existing buffer
is reused in the DMA ring.
Updates for v2:
Additional 2 locations where allocation was not checked,
has been changed to reuse existing buffer.
Fixes:
23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 12 Mar 2019 13:50:11 +0000 (06:50 -0700)]
l2tp: fix infoleak in l2tp_ip6_recvmsg()
[ Upstream commit
163d1c3d6f17556ed3c340d3789ea93be95d6c28 ]
Back in 2013 Hannes took care of most of such leaks in commit
bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls")
But the bug in l2tp_ip6_recvmsg() has not been fixed.
syzbot report :
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
CPU: 1 PID: 10996 Comm: syz-executor362 Not tainted 5.0.0+ #11
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x173/0x1d0 lib/dump_stack.c:113
kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600
kmsan_internal_check_memory+0x9f4/0xb10 mm/kmsan/kmsan.c:694
kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601
_copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
copy_to_user include/linux/uaccess.h:174 [inline]
move_addr_to_user+0x311/0x570 net/socket.c:227
___sys_recvmsg+0xb65/0x1310 net/socket.c:2283
do_recvmmsg+0x646/0x10c0 net/socket.c:2390
__sys_recvmmsg net/socket.c:2469 [inline]
__do_sys_recvmmsg net/socket.c:2492 [inline]
__se_sys_recvmmsg+0x1d1/0x350 net/socket.c:2485
__x64_sys_recvmmsg+0x62/0x80 net/socket.c:2485
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x445819
Code: e8 6c b6 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f64453eddb8 EFLAGS:
00000246 ORIG_RAX:
000000000000012b
RAX:
ffffffffffffffda RBX:
00000000006dac28 RCX:
0000000000445819
RDX:
0000000000000005 RSI:
0000000020002f80 RDI:
0000000000000003
RBP:
00000000006dac20 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000006dac2c
R13:
00007ffeba8f87af R14:
00007f64453ee9c0 R15:
20c49ba5e353f7cf
Local variable description: ----addr@___sys_recvmsg
Variable was created at:
___sys_recvmsg+0xf6/0x1310 net/socket.c:2244
do_recvmmsg+0x646/0x10c0 net/socket.c:2390
Bytes 0-31 of 32 are uninitialized
Memory access of size 32 starts at
ffff8880ae62fbb0
Data copied to user address
0000000020000000
Fixes:
a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Wed, 6 Mar 2019 09:42:53 +0000 (10:42 +0100)]
ipv4/route: fail early when inet dev is missing
[ Upstream commit
22c74764aa2943ecdf9f07c900d8a9c8ba6c9265 ]
If a non local multicast packet reaches ip_route_input_rcu() while
the ingress device IPv4 private data (in_dev) is NULL, we end up
doing a NULL pointer dereference in IN_DEV_MFORWARD().
Since the later call to ip_route_input_mc() is going to fail if
!in_dev, we can fail early in such scenario and avoid the dangerous
code path.
v1 -> v2:
- clarified the commit message, no code changes
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Fixes:
e58e41596811 ("net: Enable support for VRF with ipv4 multicast")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sun, 10 Mar 2019 17:39:37 +0000 (10:39 -0700)]
gro_cells: make sure device is up in gro_cells_receive()
[ Upstream commit
2a5ff07a0eb945f291e361aa6f6becca8340ba46 ]
We keep receiving syzbot reports [1] that show that tunnels do not play
the rcu/IFF_UP rules properly.
At device dismantle phase, gro_cells_destroy() will be called
only after a full rcu grace period is observed after IFF_UP
has been cleared.
This means that IFF_UP needs to be tested before queueing packets
into netif_rx() or gro_cells.
This patch implements the test in gro_cells_receive() because
too many callers do not seem to bother enough.
[1]
BUG: unable to handle kernel paging request at
fffff4ca0b9ffffe
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:
ffff8880aa3f79a8 EFLAGS:
00010a02
RAX:
00ffffffffffffe8 RBX:
ffffe8ffffc64b70 RCX:
1ffff8ca0b9ffffe
RDX:
ffffc6505cffffe8 RSI:
ffffffff858410ca RDI:
ffffc6505cfffff0
RBP:
ffff8880aa3f7a08 R08:
ffff8880aa3e8580 R09:
fffffbfff1263645
R10:
fffffbfff1263644 R11:
ffffffff8931b223 R12:
dffffc0000000000
R13:
0000000000000000 R14:
ffffe8ffffc64b80 R15:
ffffe8ffffc64b75
kobject: 'loop2' (
000000004bd7d84a): kobject_uevent_env
FS:
0000000000000000(0000) GS:
ffff8880ae800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
fffff4ca0b9ffffe CR3:
0000000094941000 CR4:
00000000001406f0
Call Trace:
kobject: 'loop2' (
000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2'
ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010
netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970
rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116
ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124
vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495
ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156
cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551
process_one_work+0x98e/0x1790 kernel/workqueue.c:2173
worker_thread+0x98/0xe40 kernel/workqueue.c:2319
kthread+0x357/0x430 kernel/kthread.c:246
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Modules linked in:
CR2:
fffff4ca0b9ffffe
[ end trace
513fc9c1338d1cb3 ]
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:
ffff8880aa3f79a8 EFLAGS:
00010a02
RAX:
00ffffffffffffe8 RBX:
ffffe8ffffc64b70 RCX:
1ffff8ca0b9ffffe
RDX:
ffffc6505cffffe8 RSI:
ffffffff858410ca RDI:
ffffc6505cfffff0
RBP:
ffff8880aa3f7a08 R08:
ffff8880aa3e8580 R09:
fffffbfff1263645
R10:
fffffbfff1263644 R11:
ffffffff8931b223 R12:
dffffc0000000000
kobject: 'loop3' (
00000000e4ee57a6): kobject_uevent_env
R13:
0000000000000000 R14:
ffffe8ffffc64b80 R15:
ffffe8ffffc64b75
FS:
0000000000000000(0000) GS:
ffff8880ae800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
fffff4ca0b9ffffe CR3:
0000000094941000 CR4:
00000000001406f0
Fixes:
c9e6bc644e55 ("net: add gro_cells infrastructure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Li RongQing [Wed, 6 Mar 2019 06:46:27 +0000 (14:46 +0800)]
connector: fix unsafe usage of ->real_parent
[ Upstream commit
6d2b0f02f5a07a4bf02e4cbc90d7eaa85cac2986 ]
proc_exit_connector() uses ->real_parent lockless. This is not
safe that its parent can go away at any moment, so use RCU to
protect it, and ensure that this task is not released.
[ 747.624551] ==================================================================
[ 747.632946] BUG: KASAN: use-after-free in proc_exit_connector+0x1f7/0x310
[ 747.640686] Read of size 4 at addr
ffff88a0276988e0 by task sshd/2882
[ 747.648032]
[ 747.649804] CPU: 11 PID: 2882 Comm: sshd Tainted: G E 4.19.26-rc2 #11
[ 747.658629] Hardware name: IBM x3550M4 -[7914OFV]-/00AM544, BIOS -[D7E142BUS-1.71]- 07/31/2014
[ 747.668419] Call Trace:
[ 747.671269] dump_stack+0xf0/0x19b
[ 747.675186] ? show_regs_print_info+0x5/0x5
[ 747.679988] ? kmsg_dump_rewind_nolock+0x59/0x59
[ 747.685302] print_address_description+0x6a/0x270
[ 747.691162] kasan_report+0x258/0x380
[ 747.695835] ? proc_exit_connector+0x1f7/0x310
[ 747.701402] proc_exit_connector+0x1f7/0x310
[ 747.706767] ? proc_coredump_connector+0x2d0/0x2d0
[ 747.712715] ? _raw_write_unlock_irq+0x29/0x50
[ 747.718270] ? _raw_write_unlock_irq+0x29/0x50
[ 747.723820] ? ___preempt_schedule+0x16/0x18
[ 747.729193] ? ___preempt_schedule+0x16/0x18
[ 747.734574] do_exit+0xa11/0x14f0
[ 747.738880] ? mm_update_next_owner+0x590/0x590
[ 747.744525] ? debug_show_all_locks+0x3c0/0x3c0
[ 747.761448] ? ktime_get_coarse_real_ts64+0xeb/0x1c0
[ 747.767589] ? lockdep_hardirqs_on+0x1a6/0x290
[ 747.773154] ? check_chain_key+0x139/0x1f0
[ 747.778345] ? check_flags.part.35+0x240/0x240
[ 747.783908] ? __lock_acquire+0x2300/0x2300
[ 747.789171] ? _raw_spin_unlock_irqrestore+0x59/0x70
[ 747.795316] ? _raw_spin_unlock_irqrestore+0x59/0x70
[ 747.801457] ? do_raw_spin_unlock+0x10f/0x1e0
[ 747.806914] ? do_raw_spin_trylock+0x120/0x120
[ 747.812481] ? preempt_count_sub+0x14/0xc0
[ 747.817645] ? _raw_spin_unlock+0x2e/0x50
[ 747.822708] ? __handle_mm_fault+0x12db/0x1fa0
[ 747.828367] ? __pmd_alloc+0x2d0/0x2d0
[ 747.833143] ? check_noncircular+0x50/0x50
[ 747.838309] ? match_held_lock+0x7f/0x340
[ 747.843380] ? check_noncircular+0x50/0x50
[ 747.848561] ? handle_mm_fault+0x21a/0x5f0
[ 747.853730] ? check_flags.part.35+0x240/0x240
[ 747.859290] ? check_chain_key+0x139/0x1f0
[ 747.864474] ? __do_page_fault+0x40f/0x760
[ 747.869655] ? __audit_syscall_entry+0x4b/0x1f0
[ 747.875319] ? syscall_trace_enter+0x1d5/0x7b0
[ 747.880877] ? trace_raw_output_preemptirq_template+0x90/0x90
[ 747.887895] ? trace_raw_output_sys_exit+0x80/0x80
[ 747.893860] ? up_read+0x3b/0x90
[ 747.898142] ? stop_critical_timings+0x260/0x260
[ 747.903909] do_group_exit+0xe0/0x1c0
[ 747.908591] ? __x64_sys_exit+0x30/0x30
[ 747.913460] ? trace_raw_output_preemptirq_template+0x90/0x90
[ 747.920485] ? tracer_hardirqs_on+0x270/0x270
[ 747.925956] __x64_sys_exit_group+0x28/0x30
[ 747.931214] do_syscall_64+0x117/0x400
[ 747.935988] ? syscall_return_slowpath+0x2f0/0x2f0
[ 747.941931] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 747.947788] ? trace_hardirqs_on_caller+0x1d0/0x1d0
[ 747.953838] ? lockdep_sys_exit+0x16/0x8e
[ 747.958915] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 747.964784] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 747.971021] RIP: 0033:0x7f572f154c68
[ 747.975606] Code: Bad RIP value.
[ 747.979791] RSP: 002b:
00007ffed2dfaa58 EFLAGS:
00000246 ORIG_RAX:
00000000000000e7
[ 747.989324] RAX:
ffffffffffffffda RBX:
00007f572f431840 RCX:
00007f572f154c68
[ 747.997910] RDX:
0000000000000001 RSI:
000000000000003c RDI:
0000000000000001
[ 748.006495] RBP:
0000000000000001 R08:
00000000000000e7 R09:
fffffffffffffee0
[ 748.015079] R10:
00007f572f4387e8 R11:
0000000000000246 R12:
00007f572f431840
[ 748.023664] R13:
000055a7f90f2c50 R14:
000055a7f96e2310 R15:
000055a7f96e2310
[ 748.032287]
[ 748.034509] Allocated by task 2300:
[ 748.038982] kasan_kmalloc+0xa0/0xd0
[ 748.043562] kmem_cache_alloc_node+0xf5/0x2e0
[ 748.049018] copy_process+0x1781/0x4790
[ 748.053884] _do_fork+0x166/0x9a0
[ 748.058163] do_syscall_64+0x117/0x400
[ 748.062943] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 748.069180]
[ 748.071405] Freed by task 15395:
[ 748.075591] __kasan_slab_free+0x130/0x180
[ 748.080752] kmem_cache_free+0xc2/0x310
[ 748.085619] free_task+0xea/0x130
[ 748.089901] __put_task_struct+0x177/0x230
[ 748.095063] finish_task_switch+0x51b/0x5d0
[ 748.100315] __schedule+0x506/0xfa0
[ 748.104791] schedule+0xca/0x260
[ 748.108978] futex_wait_queue_me+0x27e/0x420
[ 748.114333] futex_wait+0x251/0x550
[ 748.118814] do_futex+0x75b/0xf80
[ 748.123097] __x64_sys_futex+0x231/0x2a0
[ 748.128065] do_syscall_64+0x117/0x400
[ 748.132835] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 748.139066]
[ 748.141289] The buggy address belongs to the object at
ffff88a027698000
[ 748.141289] which belongs to the cache task_struct of size 12160
[ 748.156589] The buggy address is located 2272 bytes inside of
[ 748.156589] 12160-byte region [
ffff88a027698000,
ffff88a02769af80)
[ 748.171114] The buggy address belongs to the page:
[ 748.177055] page:
ffffea00809da600 count:1 mapcount:0 mapping:
ffff888107d01e00 index:0x0 compound_mapcount: 0
[ 748.189136] flags: 0x57ffffc0008100(slab|head)
[ 748.194688] raw:
0057ffffc0008100 ffffea00809a3200 0000000300000003 ffff888107d01e00
[ 748.204424] raw:
0000000000000000 0000000000020002 00000001ffffffff 0000000000000000
[ 748.214146] page dumped because: kasan: bad access detected
[ 748.220976]
[ 748.223197] Memory state around the buggy address:
[ 748.229128]
ffff88a027698780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 748.238271]
ffff88a027698800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 748.247414] >
ffff88a027698880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 748.256564] ^
[ 748.264267]
ffff88a027698900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 748.273493]
ffff88a027698980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 748.282630] ==================================================================
Fixes:
b086ff87251b4a4 ("connector: add parent pid and tgid to coredump and exit events")
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 13 Mar 2019 21:02:41 +0000 (14:02 -0700)]
Linux 4.19.29
Peter Zijlstra (Intel) [Tue, 5 Mar 2019 21:23:18 +0000 (22:23 +0100)]
perf/x86/intel: Implement support for TSX Force Abort
commit
400816f60c543153656ac74eaf7f36f6b7202378 upstream
Skylake (and later) will receive a microcode update to address a TSX
errata. This microcode will, on execution of a TSX instruction
(speculative or not) use (clobber) PMC3. This update will also provide
a new MSR to change this behaviour along with a CPUID bit to enumerate
the presence of this new MSR.
When the MSR gets set; the microcode will no longer use PMC3 but will
Force Abort every TSX transaction (upon executing COMMIT).
When TSX Force Abort (TFA) is allowed (default); the MSR gets set when
PMC3 gets scheduled and cleared when, after scheduling, PMC3 is
unused.
When TFA is not allowed; clear PMC3 from all constraints such that it
will not get used.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra (Intel) [Tue, 5 Mar 2019 21:23:17 +0000 (22:23 +0100)]
x86: Add TSX Force Abort CPUID/MSR
commit
52f64909409c17adf54fcf5f9751e0544ca3a6b4 upstream
Skylake systems will receive a microcode update to address a TSX
errata. This microcode will (by default) clobber PMC3 when TSX
instructions are (speculatively or not) executed.
It also provides an MSR to cause all TSX transaction to abort and
preserve PMC3.
Add the CPUID enumeration and MSR definition.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra (Intel) [Tue, 5 Mar 2019 21:23:16 +0000 (22:23 +0100)]
perf/x86/intel: Generalize dynamic constraint creation
commit
11f8b2d65ca9029591c8df26bb6bd063c312b7fe upstream
Such that we can re-use it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra (Intel) [Tue, 5 Mar 2019 21:23:15 +0000 (22:23 +0100)]
perf/x86/intel: Make cpuc allocations consistent
commit
d01b1f96a82e5dd7841a1d39db3abfdaf95f70ab upstream
The cpuc data structure allocation is different between fake and real
cpuc's; use the same code to init/free both.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Thu, 7 Feb 2019 19:36:53 +0000 (20:36 +0100)]
driver core: Postpone DMA tear-down until after devres release
commit
376991db4b6464e906d699ef07681e2ffa8ab08c upstream.
When unbinding the (IOMMU-enabled) R-Car SATA device on Salvator-XS
(R-Car H3 ES2.0), in preparation of rebinding against vfio-platform for
device pass-through for virtualization:
echo
ee300000.sata > /sys/bus/platform/drivers/sata_rcar/unbind
the kernel crashes with:
Unable to handle kernel paging request at virtual address
ffffffbf029ffffc
Mem abort info:
ESR = 0x96000006
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp =
000000007e8c586c
[
ffffffbf029ffffc] pgd=
000000073bfc6003, pud=
000000073bfc6003, pmd=
0000000000000000
Internal error: Oops:
96000006 [#1] SMP
Modules linked in:
CPU: 0 PID: 1098 Comm: bash Not tainted 5.0.0-rc5-salvator-x-00452-g37596f884f4318ef #287
Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT)
pstate:
60400005 (nZCv daif +PAN -UAO)
pc : __free_pages+0x8/0x58
lr : __dma_direct_free_pages+0x50/0x5c
sp :
ffffff801268baa0
x29:
ffffff801268baa0 x28:
0000000000000000
x27:
ffffffc6f9c60bf0 x26:
ffffffc6f9c60bf0
x25:
ffffffc6f9c60810 x24:
0000000000000000
x23:
00000000fffff000 x22:
ffffff8012145000
x21:
0000000000000800 x20:
ffffffbf029fffc8
x19:
0000000000000000 x18:
ffffffc6f86c42c8
x17:
0000000000000000 x16:
0000000000000070
x15:
0000000000000003 x14:
0000000000000000
x13:
ffffff801103d7f8 x12:
0000000000000028
x11:
ffffff8011117604 x10:
0000000000009ad8
x9 :
ffffff80110126d0 x8 :
ffffffc6f7563000
x7 :
6b6b6b6b6b6b6b6b x6 :
0000000000000018
x5 :
ffffff8011cf3cc8 x4 :
0000000000004000
x3 :
0000000000080000 x2 :
0000000000000001
x1 :
0000000000000000 x0 :
ffffffbf029fffc8
Process bash (pid: 1098, stack limit = 0x00000000c38e3e32)
Call trace:
__free_pages+0x8/0x58
__dma_direct_free_pages+0x50/0x5c
arch_dma_free+0x1c/0x98
dma_direct_free+0x14/0x24
dma_free_attrs+0x9c/0xdc
dmam_release+0x18/0x20
release_nodes+0x25c/0x28c
devres_release_all+0x48/0x4c
device_release_driver_internal+0x184/0x1f0
device_release_driver+0x14/0x1c
unbind_store+0x70/0xb8
drv_attr_store+0x24/0x34
sysfs_kf_write+0x4c/0x64
kernfs_fop_write+0x154/0x1c4
__vfs_write+0x34/0x164
vfs_write+0xb4/0x16c
ksys_write+0x5c/0xbc
__arm64_sys_write+0x14/0x1c
el0_svc_common+0x98/0x114
el0_svc_handler+0x1c/0x24
el0_svc+0x8/0xc
Code:
d51b4234 17fffffa a9bf7bfd 910003fd (
b9403404)
---[ end trace
8c564cdd3a1a840f ]---
While I've bisected this to commit
e8e683ae9a736407 ("iommu/of: Fix
probe-deferral"), and reverting that commit on post-v5.0-rc4 kernels
does fix the problem, this turned out to be a red herring.
On arm64, arch_teardown_dma_ops() resets dev->dma_ops to NULL.
Hence if a driver has used a managed DMA allocation API, the allocated
DMA memory will be freed using the direct DMA ops, while it may have
been allocated using a custom DMA ops (iommu_dma_ops in this case).
Fix this by reversing the order of the calls to devres_release_all() and
arch_teardown_dma_ops().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
[rm: backport for 4.12-4.19 - kernels before 5.0 will not see
the crash above, but may get silent memory corruption instead]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel F. Dickinson [Sat, 22 Dec 2018 06:09:13 +0000 (01:09 -0500)]
ath9k: Avoid OF no-EEPROM quirks without qca,no-eeprom
commit
ce938231bd3b1d7af3cbd8836f084801090470e1 upstream.
ath9k_of_init() function[0] was initially written on the assumption that
if someone had an explicit ath9k OF node that "there must be something
wrong, why would someone add an OF node if everything is fine"[1]
(Quoting Martin Blumenstingl <martin.blumenstingl@googlemail.com>)
"it turns out it's not that simple. with your requirements I'm now aware
of two use-cases where the current code in ath9k_of_init() doesn't work
without modifications"[1]
The "your requirements" Martin speaks of is the result of the fact that I
have a device (PowerCloud Systems CR5000) has some kind of default - not
unique mac address - set and requires to set the correct MAC address via
mac-address devicetree property, however:
"some cards come with a physical EEPROM chip [or OTP] so "qca,no-eeprom"
should not be set (your use-case). in this case AH_USE_EEPROM should be
set (which is the default when there is no OF node)"[1]
The other use case is:
the firmware on some PowerMac G5 seems to add a OF node for the ath9k
card automatically. depending on the EEPROM on the card AH_NO_EEP_SWAP
should be unset (which is the default when there is no OF node). see [3]
After this patch to ath9k_of_init() the new behavior will be:
if there's no OF node then everything is the same as before
if there's an empty OF node then ath9k will use the hardware EEPROM
(before ath9k would fail to initialize because no EEPROM data was
provided by userspace)
if there's an OF node with only a MAC address then ath9k will use
the MAC address and the hardware EEPROM (see the case above)
with "qca,no-eeprom" EEPROM data from userspace will be requested.
the behavior here will not change
[1]
Martin provides additional background on EEPROM swapping[1].
Thanks to Christian Lamparter <chunkeey@gmail.com> for all his help on
troubleshooting this issue and the basis for this patch.
[0]https://elixir.bootlin.com/linux/v4.20-rc7/source/drivers/net/wireless/ath/ath9k/init.c#L615
[1]https://github.com/openwrt/openwrt/pull/1645#issuecomment-
448027058
[2]https://github.com/openwrt/openwrt/pull/1613
[3]https://patchwork.kernel.org/patch/
10241731/
Fixes:
138b41253d9c ("ath9k: parse the device configuration from an OF node")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ronnie Sahlberg [Wed, 24 Oct 2018 01:50:33 +0000 (11:50 +1000)]
cifs: allow calling SMB2_xxx_free(NULL)
commit
32a1fb36f6e50183871c2c1fcf5493c633e84732 upstream.
Change these free functions to allow passing NULL as the argument and
treat it as a no-op just like free(NULL) would.
Or, if rqst->rq_iov is NULL.
The second scenario could happen for smb2_queryfs() if the call
to SMB2_query_info_init() fails and we go to qfs_exit to clean up
and free all resources.
In that case we have not yet assigned rqst[2].rq_iov and thus
the rq_iov dereference in SMB2_close_free() will cause a NULL pointer
dereference.
[ bp: upstream patch also fixes SMB2_set_info_free which was introduced in 4.20 ]
Fixes:
1eb9fb52040f ("cifs: create SMB2_open_init()/SMB2_open_free() helpers")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gao Xiang [Mon, 11 Mar 2019 06:08:58 +0000 (14:08 +0800)]
staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()
commit
419d6efc50e94bcf5d6b35cd8c71f79edadec564 upstream.
As Al pointed out, "
... and while we are at it, what happens to
unsigned int nameoff = le16_to_cpu(de[mid].nameoff);
unsigned int matched = min(startprfx, endprfx);
struct qstr dname = QSTR_INIT(data + nameoff,
unlikely(mid >= ndirents - 1) ?
maxsize - nameoff :
le16_to_cpu(de[mid + 1].nameoff) - nameoff);
/* string comparison without already matched prefix */
int ret = dirnamecmp(name, &dname, &matched);
if le16_to_cpu(de[...].nameoff) is not monotonically increasing? I.e.
what's to prevent e.g. (unsigned)-1 ending up in dname.len?
Corrupted fs image shouldn't oops the kernel.. "
Revisit the related lookup flow to address the issue.
Fixes:
d72d1ce60174 ("staging: erofs: add namei functions")
Cc: <stable@vger.kernel.org> # 4.19+
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gao Xiang [Mon, 11 Mar 2019 06:08:57 +0000 (14:08 +0800)]
staging: erofs: fix race of initializing xattrs of a inode at the same time
commit
62dc45979f3f8cb0ea67302a93bff686f0c46c5a upstream.
In real scenario, there could be several threads accessing xattrs
of the same xattr-uninitialized inode, and init_inode_xattrs()
almost at the same time.
That's actually an unexpected behavior, this patch closes the race.
Fixes:
b17500a0fdba ("staging: erofs: introduce xattr & acl support")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gao Xiang [Mon, 11 Mar 2019 06:08:56 +0000 (14:08 +0800)]
staging: erofs: fix memleak of inode's shared xattr array
From: Sheng Yong <shengyong1@huawei.com>
commit
3b1b5291f79d040d549d7c746669fc30e8045b9b upstream.
If it fails to read a shared xattr page, the inode's shared xattr array
is not freed. The next time the inode's xattr is accessed, the previously
allocated array is leaked.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Fixes:
b17500a0fdba ("staging: erofs: introduce xattr & acl support")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gao Xiang [Mon, 11 Mar 2019 06:08:55 +0000 (14:08 +0800)]
staging: erofs: fix fast symlink w/o xattr when fs xattr is on
commit
7077fffcb0b0b65dc75e341306aeef4d0e7f2ec6 upstream.
Currently, this will hit a BUG_ON for these symlinks as follows:
- kernel message
------------[ cut here ]------------
kernel BUG at drivers/staging/erofs/xattr.c:59!
SMP PTI
CPU: 1 PID: 1170 Comm: getllxattr Not tainted 4.20.0-rc6+ #92
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
RIP: 0010:init_inode_xattrs+0x22b/0x270
Code: 48 0f 45 ea f0 ff 4d 34 74 0d 41 83 4c 24 e0 01 31 c0 e9 00 fe ff ff 48 89 ef e8 e0 31 9e ff eb e9 89 e8 e9 ef fd ff ff 0f 0$
<0f> 0b 48 89 ef e8 fb f6 9c ff 48 8b 45 08 a8 01 75 24 f0 ff 4d 34
RSP: 0018:
ffffa03ac026bdf8 EFLAGS:
00010246
------------[ cut here ]------------
...
Call Trace:
erofs_listxattr+0x30/0x2c0
? selinux_inode_listxattr+0x5a/0x80
? kmem_cache_alloc+0x33/0x170
? security_inode_listxattr+0x27/0x40
listxattr+0xaf/0xc0
path_listxattr+0x5a/0xa0
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
...
---[ end trace
3c24b49408dc0c72 ]---
Fix it by checking ->xattr_isize in init_inode_xattrs(),
and it also fixes improper return value -ENOTSUPP
(it should be -ENODATA if xattr is enabled) for those inodes.
Fixes:
b17500a0fdba ("staging: erofs: introduce xattr & acl support")
Cc: <stable@vger.kernel.org> # 4.19+
Reported-by: Li Guifu <bluce.liguifu@huawei.com>
Tested-by: Li Guifu <bluce.liguifu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gao Xiang [Mon, 11 Mar 2019 06:08:54 +0000 (14:08 +0800)]
staging: erofs: add error handling for xattr submodule
commit
cadf1ccf1b0021d0b7a9347e102ac5258f9f98c8 upstream.
This patch enhances the missing error handling code for
xattr submodule, which improves the stability for the rare cases.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Gruenbacher [Wed, 6 Mar 2019 14:41:57 +0000 (15:41 +0100)]
gfs2: Fix missed wakeups in find_insert_glock
commit
605b0487f0bc1ae9963bf52ece0f5c8055186f81 upstream.
Mark Syms has reported seeing tasks that are stuck waiting in
find_insert_glock. It turns out that struct lm_lockname contains four padding
bytes on 64-bit architectures that function glock_waitqueue doesn't skip when
hashing the glock name. As a result, we can end up waking up the wrong
waitqueue, and the waiting tasks may be stuck forever.
Fix that by using ht_parms.key_len instead of sizeof(struct lm_lockname) for
the key length.
Reported-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Taehee Yoo [Sat, 6 Oct 2018 15:09:32 +0000 (00:09 +0900)]
netfilter: xt_TEE: add missing code to get interface index in checkentry.
[ Upstream commit
18c0ab87364ac5128a152055fdcb1d27e01caf01 ]
checkentry(tee_tg_check) should initialize priv->oif from dev if possible.
But only netdevice notifier handler can set that.
Hence priv->oif is always -1 until notifier handler is called.
Fixes:
9e2f6c5d78db ("netfilter: Rework xt_TEE netdevice notifier")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Taehee Yoo [Sat, 6 Oct 2018 15:09:18 +0000 (00:09 +0900)]
netfilter: xt_TEE: fix wrong interface selection
[ Upstream commit
f24d2d4f9586985509320f90308723d3d0c4e47f ]
TEE netdevice notifier handler checks only interface name. however
each netns can have same interface name. hence other netns's interface
could be selected.
test commands:
%ip netns add vm1
%iptables -I INPUT -p icmp -j TEE --gateway 192.168.1.1 --oif enp2s0
%ip link set enp2s0 netns vm1
Above rule is in the root netns. but that rule could get enp2s0
ifindex of vm1 by notifier handler.
After this patch, TEE rule is added to the per-netns list.
Fixes:
9e2f6c5d78db ("netfilter: Rework xt_TEE netdevice notifier")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Thu, 24 Jan 2019 12:06:58 +0000 (13:06 +0100)]
drm: disable uncached DMA optimization for ARM and arm64
[ Upstream commit
e02f5c1bb2283cfcee68f2f0feddcc06150f13aa ]
The DRM driver stack is designed to work with cache coherent devices
only, but permits an optimization to be enabled in some cases, where
for some buffers, both the CPU and the GPU use uncached mappings,
removing the need for DMA snooping and allocation in the CPU caches.
The use of uncached GPU mappings relies on the correct implementation
of the PCIe NoSnoop TLP attribute by the platform, otherwise the GPU
will use cached mappings nonetheless. On x86 platforms, this does not
seem to matter, as uncached CPU mappings will snoop the caches in any
case. However, on ARM and arm64, enabling this optimization on a
platform where NoSnoop is ignored results in loss of coherency, which
breaks correct operation of the device. Since we have no way of
detecting whether NoSnoop works or not, just disable this
optimization entirely for ARM and arm64.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Zhou <David1.Zhou@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Michel Daenzer <michel.daenzer@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: amd-gfx list <amd-gfx@lists.freedesktop.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Reported-by: Carsten Haitzler <Carsten.Haitzler@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.kernel.org/patch/10778815/
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Szyprowski [Mon, 25 Feb 2019 18:42:52 +0000 (19:42 +0100)]
ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4
commit
a3238924a820c1d7c977b632b769f3b5690cba09 upstream.
The maximum voltage value for buck8 regulator on Odroid XU3/XU4 boards is
set too low. Increase it to the 2000mV as specified on the board schematic.
So far the board worked fine, because of the bug in the PMIC driver, which
used incorrect step value for that regulator. It interpreted the voltage
value set by the bootloader as 1225mV and kept it unchanged. The regulator
driver has been however fixed recently in the commit
56b5d4ea778c
("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35"), what results
in reading the proper buck8 value and forcing it to 1500mV on boot. This
is not enough for proper board operation and results in eMMC errors during
heavy IO traffic. Increasing maximum voltage value for buck8 restores
original driver behavior and fixes eMMC issues.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes:
86a2d2ac5e5d ("ARM: dts: Add dts file for Odroid XU3 board")
Fixes:
56b5d4ea778c ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Szyprowski [Fri, 15 Feb 2019 10:36:50 +0000 (11:36 +0100)]
ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
commit
a66352e005488ecb4b534ba1af58a9f671eba9b8 upstream.
Add minimal parameters needed by the Exynos CLKOUT driver to Exynos3250
PMU node. This fixes the following warning on boot:
exynos_clkout_init: failed to register clkout clock
Fixes:
d19bb397e19e ("ARM: dts: exynos: Update PMU node with CLKOUT related data")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Szyprowski [Thu, 24 Jan 2019 12:22:57 +0000 (13:22 +0100)]
ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3
commit
ec33745bccc8f336957c751f4153421cc9ef5a54 upstream.
Commit
225da7e65a03 ("ARM: dts: add eMMC reset line for
exynos4412-odroid-common") added MMC power sequence for eMMC card of
Odroid X2/U3. It reused generic sd1_cd pin control configuration node
and only disabled pull-up. However that time the pinctrl configuration
was not applied during MMC power sequence driver initialization. This
has been changed later by commit
d97a1e5d7cd2 ("mmc: pwrseq: convert to
proper platform device").
It turned out then, that the provided pinctrl configuration is not
correct, because the eMMC_RTSN line is being re-configured as 'special
function/card detect function for mmc1 controller' not the simple
'output', thus the power sequence driver doesn't really set the pin
value. This in effect broke the reboot of Odroid X2/U3 boards. Fix this
by providing separate node with eMMC_RTSN pin configuration.
Cc: <stable@vger.kernel.org>
Reported-by: Markus Reichl <m.reichl@fivetechno.de>
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes:
225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alistair Strachan [Wed, 23 Jan 2019 20:06:06 +0000 (12:06 -0800)]
arm64: dts: hikey: Revert "Enable HS200 mode on eMMC"
commit
8d26c1390aec795d492b8de5e4437751e8805a1d upstream.
This reverts commit
abd7d0972a192ee653efc7b151a6af69db58f2bb. This
change was already partially reverted by John Stultz in
commit
9c6d26df1fae ("arm64: dts: hikey: Fix eMMC corruption regression").
This change appears to cause controller resets and block read failures
which prevents successful booting on some hikey boards.
Cc: Ryan Grachek <ryan@edited.us>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: stable <stable@vger.kernel.org> #4.17+
Signed-off-by: Alistair Strachan <astrachan@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kiszka [Thu, 24 Jan 2019 07:52:33 +0000 (08:52 +0100)]
arm64: dts: hikey: Give wifi some time after power-on
commit
83b944174ad79825ae84a47af1a0354485b24602 upstream.
Somewhere along recent changes to power control of the wl1835, power-on
became very unreliable on the hikey, failing like this:
wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16
After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms, the
hikey would already be happy with 1 ms. Still, we use the safer 10 ms,
like on the Ultra96.
Fixes:
ea452678734e ("arm64: dts: hikey: Fix WiFi support")
Cc: <stable@vger.kernel.org> #4.12+
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kiszka [Thu, 24 Jan 2019 08:28:59 +0000 (09:28 +0100)]
arm64: dts: zcu100-revC: Give wifi some time after power-on
commit
35a4f89cd4731ac6ec985cd29ddc1630903006b7 upstream.
Somewhere along recent changes to power control of the wl1831, power-on
became very unreliable on the Ultra96, failing like this:
wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16
After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms,
Ultra96 is already happy with 10 ms.
Fixes:
5869ba0653b9 ("arm64: zynqmp: Add support for Xilinx zcu100-revC")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Thu, 7 Feb 2019 13:30:05 +0000 (15:30 +0200)]
x86/PCI: Fixup RTIT_BAR of Intel Denverton Trace Hub
commit
2e095ce7b6ecce2f3e2ff330527f12056ed1e1a1 upstream.
On Denverton's integration of the Intel(R) Trace Hub (for a reference and
overview see Documentation/trace/intel_th.rst) the reported size of one of
its resources (RTIT_BAR) doesn't match its actual size, which leads to
overlaps with other devices' resources.
In practice, it overlaps with XHCI MMIO space, which results in the xhci
driver bailing out after seeing its registers as 0xffffffff, and perceived
disappearance of all USB devices:
intel_th_pci 0000:00:1f.7: enabling device (0004 -> 0006)
xhci_hcd 0000:00:15.0: xHCI host controller not responding, assume dead
xhci_hcd 0000:00:15.0: xHC not responding in xhci_irq, assume controller is dead
xhci_hcd 0000:00:15.0: HC died; cleaning up
usb 1-1: USB disconnect, device number 2
For this reason, we need to resize the RTIT_BAR on Denverton to its actual
size, which in this case is 4MB. The corresponding erratum is DNV36 at the
link below:
DNV36. Processor Host Root Complex May Incorrectly Route Memory
Accesses to Intel® Trace Hub
Problem: The Intel® Trace Hub RTIT_BAR (B0:D31:F7 offset 20h) is
reported as a 2KB memory range. Due to this erratum, the
processor Host Root Complex will forward addresses from
RTIT_BAR to RTIT_BAR + 4MB -1 to Intel® Trace Hub.
Implication: Devices assigned within the RTIT_BAR to RTIT_BAR + 4MB -1
space may not function correctly.
Workaround: A BIOS code change has been identified and may be
implemented as a workaround for this erratum.
Status: No Fix.
Note that
5118ccd34780 ("intel_th: pci: Add Denverton SOC support") updates
the Trace Hub driver so it claims the Denverton device, but the resource
overlap exists regardless of whether that driver is loaded or that commit
is included.
Link: https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/atom-c3000-family-spec-update.pdf
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
[bhelgaas: include erratum text, clarify relationship with
5118ccd34780]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Fri, 15 Feb 2019 21:42:42 +0000 (15:42 -0600)]
scsi: aacraid: Fix missing break in switch statement
commit
5e420fe635813e5746b296cfc8fff4853ae205a2 upstream.
Add missing break statement and fix identation issue.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes:
9cb62fa24e0d ("aacraid: Log firmware AIF messages")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Mon, 11 Feb 2019 18:43:23 +0000 (12:43 -0600)]
iscsi_ibft: Fix missing break in switch statement
commit
df997abeebadaa4824271009e2d2b526a70a11cb upstream.
Add missing break statement in order to prevent the code from falling
through to case ISCSI_BOOT_TGT_NAME, which is unnecessary.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes:
b33a84a38477 ("ibft: convert iscsi_ibft module to iscsi boot lib")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vincent Batts [Sat, 9 Mar 2019 23:48:04 +0000 (15:48 -0800)]
Input: elan_i2c - add id for touchpad found in Lenovo s21e-20
commit
e154ab69321ce2c54f19863d75c77b4e2dc9d365 upstream.
Lenovo s21e-20 uses ELAN0601 in its ACPI tables for the Elan touchpad.
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Gerecke [Sat, 9 Mar 2019 23:32:13 +0000 (15:32 -0800)]
Input: wacom_serial4 - add support for Wacom ArtPad II tablet
commit
44fc95e218a09d7966a9d448941fdb003f6bb69f upstream.
Tablet initially begins communicating at 9600 baud, so this command
should be used to connect to the device:
$ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0
https://github.com/linuxwacom/xf86-input-wacom/issues/40
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keith Busch [Mon, 11 Feb 2019 16:23:50 +0000 (09:23 -0700)]
nvme-pci: add missing unlock for reset error
[ Upstream commit
4726bcf30fad37cc555cd9dcd6c73f2b2668c879 ]
The reset work holds a mutex to prevent races with removal modifying the
same resources, but was unlocking only on success. Unlock on failure
too.
Fixes:
5c959d73dba64 ("nvme-pci: fix rapid add remove sequence")
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liu Bo [Fri, 25 Jan 2019 00:12:47 +0000 (08:12 +0800)]
blk-iolatency: fix IO hang due to negative inflight counter
[ Upstream commit
8c772a9bfc7c07c76f4a58b58910452fbb20843b ]
Our test reported the following stack, and vmcore showed that
->inflight counter is -1.
[
ffffc9003fcc38d0] __schedule at
ffffffff8173d95d
[
ffffc9003fcc3958] schedule at
ffffffff8173de26
[
ffffc9003fcc3970] io_schedule at
ffffffff810bb6b6
[
ffffc9003fcc3988] blkcg_iolatency_throttle at
ffffffff813911cb
[
ffffc9003fcc3a20] rq_qos_throttle at
ffffffff813847f3
[
ffffc9003fcc3a48] blk_mq_make_request at
ffffffff8137468a
[
ffffc9003fcc3b08] generic_make_request at
ffffffff81368b49
[
ffffc9003fcc3b68] submit_bio at
ffffffff81368d7d
[
ffffc9003fcc3bb8] ext4_io_submit at
ffffffffa031be00 [ext4]
[
ffffc9003fcc3c00] ext4_writepages at
ffffffffa03163de [ext4]
[
ffffc9003fcc3d68] do_writepages at
ffffffff811c49ae
[
ffffc9003fcc3d78] __filemap_fdatawrite_range at
ffffffff811b6188
[
ffffc9003fcc3e30] filemap_write_and_wait_range at
ffffffff811b6301
[
ffffc9003fcc3e60] ext4_sync_file at
ffffffffa030cee8 [ext4]
[
ffffc9003fcc3ea8] vfs_fsync_range at
ffffffff8128594b
[
ffffc9003fcc3ee8] do_fsync at
ffffffff81285abd
[
ffffc9003fcc3f18] sys_fsync at
ffffffff81285d50
[
ffffc9003fcc3f28] do_syscall_64 at
ffffffff81003c04
[
ffffc9003fcc3f50] entry_SYSCALL_64_after_swapgs at
ffffffff81742b8e
The ->inflight counter may be negative (-1) if
1) blk-iolatency was disabled when the IO was issued,
2) blk-iolatency was enabled before this IO reached its endio,
3) the ->inflight counter is decreased from 0 to -1 in endio()
In fact the hang can be easily reproduced by the below script,
H=/sys/fs/cgroup/unified/
P=/sys/fs/cgroup/unified/test
echo "+io" > $H/cgroup.subtree_control
mkdir -p $P
echo $$ > $P/cgroup.procs
xfs_io -f -d -c "pwrite 0 4k" /dev/sdg
echo "`cat /sys/block/sdg/dev` target=1000000" > $P/io.latency
xfs_io -f -d -c "pwrite 0 4k" /dev/sdg
This fixes the problem by freezing the queue so that while
enabling/disabling iolatency, there is no inflight rq running.
Note that quiesce_queue is not needed as this only updating iolatency
configuration about which dispatching request_queue doesn't care.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudarsana Reddy Kalluru [Wed, 6 Feb 2019 22:43:45 +0000 (14:43 -0800)]
qede: Fix system crash on configuring channels.
[ Upstream commit
0aa4febb420d91df5b56b1864a2465765da85f4b ]
Under heavy traffic load, when changing number of channels via
ethtool (ethtool -L) which will cause interface to be reloaded,
it was observed that some packets gets transmitted on old TX
channel/queue id which doesn't really exist after the channel
configuration leads to system crash.
Add a safeguard in the driver by validating queue id through
ndo_select_queue() which is called before the ndo_start_xmit().
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudarsana Reddy Kalluru [Wed, 6 Feb 2019 22:43:44 +0000 (14:43 -0800)]
qed: Consider TX tcs while deriving the max num_queues for PF.
[ Upstream commit
fb1faab74ddef9ec2d841d54e5d0912a097b3abe ]
Max supported queues is derived incorrectly in the case of multi-CoS.
Need to consider TCs while calculating num_queues for PF.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manish Chopra [Wed, 6 Feb 2019 22:43:42 +0000 (14:43 -0800)]
qed: Fix EQ full firmware assert.
[ Upstream commit
660492bcf4a7561b5fdc13be0ae0b0c0a8c120be ]
When slowpath messages are sent with high rate, the resulting
events can lead to a FW assert in case they are not handled fast
enough (Event Queue Full assert). Attempt to send queued slowpath
messages only after the newly evacuated entries in the EQ ring
are indicated to FW.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tetsuo Handa [Mon, 21 Jan 2019 13:49:37 +0000 (22:49 +0900)]
fs: ratelimit __find_get_block_slow() failure message.
[ Upstream commit
43636c804df0126da669c261fc820fb22f62bfc2 ]
When something let __find_get_block_slow() hit all_mapped path, it calls
printk() for 100+ times per a second. But there is no need to print same
message with such high frequency; it is just asking for stall warning, or
at least bloating log files.
[ 399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
[ 399.873324][T15342] b_state=0x00000029, b_size=512
[ 399.878403][T15342] device loop0 blocksize: 4096
[ 399.883296][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
[ 399.890400][T15342] b_state=0x00000029, b_size=512
[ 399.895595][T15342] device loop0 blocksize: 4096
[ 399.900556][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
[ 399.907471][T15342] b_state=0x00000029, b_size=512
[ 399.912506][T15342] device loop0 blocksize: 4096
This patch reduces frequency to up to once per a second, in addition to
concatenating three lines into one.
[ 399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8, b_state=0x00000029, b_size=512, device loop0 blocksize: 4096
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Keith Busch [Thu, 24 Jan 2019 01:46:11 +0000 (18:46 -0700)]
nvme-pci: fix rapid add remove sequence
[ Upstream commit
5c959d73dba6495ec01d04c206ee679d61ccb2b0 ]
A surprise removal may fail to tear down request queues if it is racing
with the initial asynchronous probe. If that happens, the remove path
won't see the queue resources to tear down, and the controller reset
path may create a new request queue on a removed device, but will not
be able to make forward progress, deadlocking the pci removal.
Protect setting up non-blocking resources from a shutdown by holding the
same mutex, and transition to the CONNECTING state after these resources
are initialized so the probe path may see the dead controller state
before dispatching new IO.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202081
Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Alex Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Keith Busch [Mon, 28 Jan 2019 16:46:07 +0000 (09:46 -0700)]
nvme: lock NS list changes while handling command effects
[ Upstream commit
e7ad43c3eda6a1690c4c3c341f95dc1c6898da83 ]
If a controller supports the NS Change Notification, the namespace
scan_work is automatically triggered after attaching a new namespace.
Occasionally the namespace scan_work may append the new namespace to the
list before the admin command effects handling is completed. The effects
handling unfreezes namespaces, but if it unfreezes the newly attached
namespace, its request_queue freeze depth will be off and we'll hit the
warning in blk_mq_unfreeze_queue().
On the next namespace add, we will fail to freeze that queue due to the
previous bad accounting and deadlock waiting for frozen.
Fix that by preventing scan work from altering the namespace list while
command effects handling needs to pair freeze with unfreeze.
Reported-by: Wen Xiong <wenxiong@us.ibm.com>
Tested-by: Wen Xiong <wenxiong@us.ibm.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philip Yang [Wed, 30 Jan 2019 20:21:16 +0000 (15:21 -0500)]
drm/amdgpu: use spin_lock_irqsave to protect vm_manager.pasid_idr
[ Upstream commit
0a5f49cbf9d6ad3721c16f8a6d823363ea7a160f ]
amdgpu_vm_get_task_info is called from interrupt handler and sched timeout
workqueue, we should use irq version spin_lock to avoid deadlock.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Thu, 10 Jan 2019 15:59:16 +0000 (07:59 -0800)]
i2c: omap: Use noirq system sleep pm ops to idle device for suspend
[ Upstream commit
c6e2bd956936d925748581e4d0294f10f1d92f2c ]
We currently get the following error with pixcir_ts driver during a
suspend resume cycle:
omap_i2c
4802a000.i2c: controller timed out
pixcir_ts 1-005c: pixcir_int_enable: can't read reg 0x34 : -110
pixcir_ts 1-005c: Failed to disable interrupt generation: -110
pixcir_ts 1-005c: Failed to stop
dpm_run_callback(): pixcir_i2c_ts_resume+0x0/0x98
[pixcir_i2c_ts] returns -110
PM: Device 1-005c failed to resume: error -110
And at least am437x based devices with pixcir_ts will fail to resume
to a touchscreen that is configured as the wakeup-source in device
tree for these devices.
This is because pixcir_ts tries to reconfigure it's registers for
noirq suspend which fails. This also leaves i2c-omap in enabled state
for suspend.
Let's fix the pixcir_ts issue and make sure i2c-omap is suspended by
adding SET_NOIRQ_SYSTEM_SLEEP_PM_OPS.
Let's also get rid of some ifdefs while at it and replace them with
__maybe_unused as SET_RUNTIME_PM_OPS and SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
already deal with the various PM Kconfig options.
Reported-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ross Lagerwall [Fri, 1 Feb 2019 14:42:28 +0000 (14:42 +0000)]
Revert "scsi: libfc: Add WARN_ON() when deleting rports"
[ Upstream commit
d8f6382a7d026989029e2e50c515df954488459b ]
This reverts commit
bbc0f8bd88abefb0f27998f40a073634a3a2db89.
It added a warning whose intent was to check whether the rport was still
linked into the peer list. It doesn't work as intended and gives false
positive warnings for two reasons:
1) If the rport is never linked into the peer list it will not be
considered empty since the list_head is never initialized.
2) If the rport is deleted from the peer list using list_del_rcu(), then
the list_head is in an undefined state and it is not considered empty.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jun-Ru Chang [Tue, 29 Jan 2019 03:56:07 +0000 (11:56 +0800)]
MIPS: Remove function size check in get_frame_info()
[ Upstream commit
2b424cfc69728224fcb5fad138ea7260728e0901 ]
Patch (
b6c7a324df37b "MIPS: Fix get_frame_info() handling of
microMIPS function size.") introduces additional function size
check for microMIPS by only checking insn between ip and ip + func_size.
However, func_size in get_frame_info() is always 0 if KALLSYMS is not
enabled. This causes get_frame_info() to return immediately without
calculating correct frame_size, which in turn causes "Can't analyze
schedule() prologue" warning messages at boot time.
This patch removes func_size check, and let the frame_size check run
up to 128 insns for both MIPS and microMIPS.
Signed-off-by: Jun-Ru Chang <jrjang@realtek.com>
Signed-off-by: Tony Wu <tonywu@realtek.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes:
b6c7a324df37b ("MIPS: Fix get_frame_info() handling of microMIPS function size.")
Cc: <ralf@linux-mips.org>
Cc: <jhogan@kernel.org>
Cc: <macro@mips.com>
Cc: <yamada.masahiro@socionext.com>
Cc: <peterz@infradead.org>
Cc: <mingo@kernel.org>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnaldo Carvalho de Melo [Tue, 29 Jan 2019 14:12:34 +0000 (15:12 +0100)]
perf trace: Support multiple "vfs_getname" probes
[ Upstream commit
6ab3bc240ade47a0f52bc16d97edd9accbe0024e ]
With a suitably defined "probe:vfs_getname" probe, 'perf trace' can
"beautify" its output, so syscalls like open() or openat() can print the
"filename" argument instead of just its hex address, like:
$ perf trace -e open -- touch /dev/null
[...]
0.590 ( 0.014 ms): touch/18063 open(filename: /dev/null, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
[...]
The output without such beautifier looks like:
0.529 ( 0.011 ms): touch/18075 open(filename: 0xc78cf288, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
However, when the vfs_getname probe expands to multiple probes and it is
not the first one that is hit, the beautifier fails, as following:
0.326 ( 0.010 ms): touch/18072 open(filename: , flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
Fix it by hooking into all the expanded probes (inlines), now, for instance:
[root@quaco ~]# perf probe -l
probe:vfs_getname (on getname_flags:73@fs/namei.c with pathname)
probe:vfs_getname_1 (on getname_flags:73@fs/namei.c with pathname)
[root@quaco ~]# perf trace -e open* sleep 1
0.010 ( 0.005 ms): sleep/5588 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: RDONLY|CLOEXEC) = 3
0.029 ( 0.006 ms): sleep/5588 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: RDONLY|CLOEXEC) = 3
0.194 ( 0.008 ms): sleep/5588 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: RDONLY|CLOEXEC) = 3
[root@quaco ~]#
Works, further verified with:
[root@quaco ~]# perf test vfs
65: Use vfs_getname probe to get syscall args filenames : Ok
66: Add vfs_getname probe to get syscall args filenames : Ok
67: Check open filename arg using perf trace + vfs_getname: Ok
[root@quaco ~]#
Reported-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mv8kolk17xla1smvmp3qabv1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Olsa [Mon, 28 Jan 2019 13:35:26 +0000 (14:35 +0100)]
perf symbols: Filter out hidden symbols from labels
[ Upstream commit
59a17706915fe5ea6f711e1f92d4fb706bce07fe ]
When perf is built with the annobin plugin (RHEL8 build) extra symbols
are added to its binary:
# nm perf | grep annobin | head -10
0000000000241100 t .annobin_annotate.c
0000000000326490 t .annobin_annotate.c
0000000000249255 t .annobin_annotate.c_end
00000000003283a8 t .annobin_annotate.c_end
00000000001bce18 t .annobin_annotate.c_end.hot
00000000001bce18 t .annobin_annotate.c_end.hot
00000000001bc3e2 t .annobin_annotate.c_end.unlikely
00000000001bc400 t .annobin_annotate.c_end.unlikely
00000000001bce18 t .annobin_annotate.c.hot
00000000001bce18 t .annobin_annotate.c.hot
...
Those symbols have no use for report or annotation and should be
skipped. Moreover they interfere with the DWARF unwind test on the PPC
arch, where they are mixed with checked symbols and then the test fails:
# perf test dwarf -v
59: Test dwarf unwind :
--- start ---
test child forked, pid 8515
unwind: .annobin_dwarf_unwind.c:ip = 0x10dba40dc (0x2740dc)
...
got: .annobin_dwarf_unwind.c 0x10dba40dc, expecting test__arch_unwind_sample
unwind: failed with 'no error'
The annobin symbols are defined as NOTYPE/LOCAL/HIDDEN:
# readelf -s ./perf | grep annobin | head -1
40:
00000000001bce4f 0 NOTYPE LOCAL HIDDEN 13 .annobin_init.c
They can still pass the check for the label symbol. Adding check for
HIDDEN and INTERNAL (as suggested by Nick below) visibility and filter
out such symbols.
> Just to be awkward, if you are going to ignore STV_HIDDEN
> symbols then you should probably also ignore STV_INTERNAL ones
> as well... Annobin does not generate them, but you never know,
> one day some other tool might create some.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Clifton <nickc@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190128133526.GD15461@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Julian Wiedmann [Mon, 4 Feb 2019 16:40:08 +0000 (17:40 +0100)]
s390/qeth: cancel close_dev work before removing a card
[ Upstream commit
c2780c1a3fb724560b1d44f7976e0de17bf153c7 ]
A card's close_dev work is scheduled on a driver-wide workqueue. If the
card is removed and freed while the work is still active, this causes a
use-after-free.
So make sure that the work is completed before freeing the card.
Fixes:
0f54761d167f ("qeth: Support VEPA mode")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Julian Wiedmann [Mon, 4 Feb 2019 16:40:07 +0000 (17:40 +0100)]
s390/qeth: fix use-after-free in error path
[ Upstream commit
afa0c5904ba16d59b0454f7ee4c807dae350f432 ]
The error path in qeth_alloc_qdio_buffers() that takes care of
cleaning up the Output Queues is buggy. It first frees the queue, but
then calls qeth_clear_outq_buffers() with that very queue struct.
Make the call to qeth_clear_outq_buffers() part of the free action
(in the correct order), and while at it fix the naming of the helper.
Fixes:
0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Julian Wiedmann [Mon, 4 Feb 2019 16:40:06 +0000 (17:40 +0100)]
s390/qeth: release cmd buffer in error paths
[ Upstream commit
5065b2dd3e5f9247a6c9d67974bc0472bf561b9d ]
Whenever we fail before/while starting an IO, make sure to release the
IO buffer. Usually qeth_irq() would do this for us, but if the IO
doesn't even start we obviously won't get an interrupt for it either.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martynas Pumputis [Tue, 29 Jan 2019 14:51:42 +0000 (15:51 +0100)]
netfilter: nf_nat: skip nat clash resolution for same-origin entries
[ Upstream commit
4e35c1cb9460240e983a01745b5f29fe3a4d8e39 ]
It is possible that two concurrent packets originating from the same
socket of a connection-less protocol (e.g. UDP) can end up having
different IP_CT_DIR_REPLY tuples which results in one of the packets
being dropped.
To illustrate this, consider the following simplified scenario:
1. Packet A and B are sent at the same time from two different threads
by same UDP socket. No matching conntrack entry exists yet.
Both packets cause allocation of a new conntrack entry.
2. get_unique_tuple gets called for A. No clashing entry found.
conntrack entry for A is added to main conntrack table.
3. get_unique_tuple is called for B and will find that the reply
tuple of B is already taken by A.
It will allocate a new UDP source port for B to resolve the clash.
4. conntrack entry for B cannot be added to main conntrack table
because its ORIGINAL direction is clashing with A and the REPLY
directions of A and B are not the same anymore due to UDP source
port reallocation done in step 3.
This patch modifies nf_conntrack_tuple_taken so it doesn't consider
colliding reply tuples if the IP_CT_DIR_ORIGINAL tuples are equal.
[ Florian: simplify patch to not use .allow_clash setting
and always ignore identical flows ]
Signed-off-by: Martynas Pumputis <martynas@weave.works>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Tue, 29 Jan 2019 14:16:23 +0000 (15:16 +0100)]
selftests: netfilter: add simple masq/redirect test cases
[ Upstream commit
98bfc3414bda335dbd7fec58bde6266f991801d7 ]
Check basic nat/redirect/masquerade for ipv4 and ipv6.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Naresh Kamboju [Tue, 29 Jan 2019 06:28:35 +0000 (06:28 +0000)]
selftests: netfilter: fix config fragment CONFIG_NF_TABLES_INET
[ Upstream commit
952b72f89ae23b316da8c1021b18d0c388ad6cc4 ]
In selftests the config fragment for netfilter was added as
NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Wed, 30 Jan 2019 19:48:44 +0000 (21:48 +0200)]
dmaengine: dmatest: Abort test in case of mapping error
[ Upstream commit
6454368a804c4955ccd116236037536f81e5b1f1 ]
In case of mapping error the DMA addresses are invalid and continuing
will screw system memory or potentially something else.
[ 222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0)
...
[ 240.912725] check: Corrupted low memory at
00000000c7c75ac9 (2940 phys) =
5656000000000000
[ 240.921998] check: Corrupted low memory at
000000005715a1cd (2948 phys) =
279f2aca5595ab2b
[ 240.931280] check: Corrupted low memory at
000000002f4024c0 (2950 phys) =
5e5624f349e793cf
...
Abort any test if mapping failed.
Fixes:
4076e755dbec ("dmatest: convert to dmaengine_unmap_data")
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefano Garzarella [Fri, 1 Feb 2019 11:42:07 +0000 (12:42 +0100)]
vsock/virtio: reset connected sockets on device removal
[ Upstream commit
85965487abc540368393a15491e6e7fcd230039d ]
When the virtio transport device disappear, we should reset all
connected sockets in order to inform the users.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefano Garzarella [Fri, 1 Feb 2019 11:42:06 +0000 (12:42 +0100)]
vsock/virtio: fix kernel panic after device hot-unplug
[ Upstream commit
22b5c0b63f32568e130fa2df4ba23efce3eb495b ]
virtio_vsock_remove() invokes the vsock_core_exit() also if there
are opened sockets for the AF_VSOCK protocol family. In this way
the vsock "transport" pointer is set to NULL, triggering the
kernel panic at the first socket activity.
This patch move the vsock_core_init()/vsock_core_exit() in the
virtio_vsock respectively in module_init and module_exit functions,
that cannot be invoked until there are open sockets.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1609699
Reported-by: Yan Fu <yafu@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Codrin Ciubotariu [Wed, 23 Jan 2019 16:33:47 +0000 (16:33 +0000)]
dmaengine: at_xdmac: Fix wrongfull report of a channel as in use
[ Upstream commit
dc3f595b6617ebc0307e0ce151e8f2f2b2489b95 ]
atchan->status variable is used to store two different information:
- pass channel interrupts status from interrupt handler to tasklet;
- channel information like whether it is cyclic or paused;
This causes a bug when device_terminate_all() is called,
(AT_XDMAC_CHAN_IS_CYCLIC cleared on atchan->status) and then a late End
of Block interrupt arrives (AT_XDMAC_CIS_BIS), which sets bit 0 of
atchan->status. Bit 0 is also used for AT_XDMAC_CHAN_IS_CYCLIC, so when
a new descriptor for a cyclic transfer is created, the driver reports
the channel as in use:
if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) {
dev_err(chan2dev(chan), "channel currently used\n");
return NULL;
}
This patch fixes the bug by adding a different struct member to keep
the interrupts status separated from the channel status bits.
Fixes:
e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Kocialkowski [Thu, 31 Jan 2019 13:25:50 +0000 (14:25 +0100)]
drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init
[ Upstream commit
b14e945bda8ae227d1bf2b1837c0c4a61721cd1a ]
When initializing clocks, a reference to the TCON channel 0 clock is
obtained. However, the clock is never prepared and enabled later.
Switching from simplefb to DRM actually disables the clock (that was
usually configured by U-Boot) because of that.
On the V3s, this results in a hang when writing to some mixer registers
when switching over to DRM from simplefb.
Fix this by preparing and enabling the clock when initializing other
clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is
apparently too late and results in the same mixer register access hang.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin KaFai Lau [Thu, 31 Jan 2019 02:12:45 +0000 (18:12 -0800)]
bpf: Fix syscall's stackmap lookup potential deadlock
[ Upstream commit
7c4cd051add3d00bbff008a133c936c515eaa8fe ]
The map_lookup_elem used to not acquiring spinlock
in order to optimize the reader.
It was true until commit
557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
The syscall's map_lookup_elem(stackmap) calls bpf_stackmap_copy().
bpf_stackmap_copy() may find the elem no longer needed after the copy is done.
If that is the case, pcpu_freelist_push() saves this elem for reuse later.
This push requires a spinlock.
If a tracing bpf_prog got run in the middle of the syscall's
map_lookup_elem(stackmap) and this tracing bpf_prog is calling
bpf_get_stackid(stackmap) which also requires the same pcpu_freelist's
spinlock, it may end up with a dead lock situation as reported by
Eric Dumazet in https://patchwork.ozlabs.org/patch/1030266/
The situation is the same as the syscall's map_update_elem() which
needs to acquire the pcpu_freelist's spinlock and could race
with tracing bpf_prog. Hence, this patch fixes it by protecting
bpf_stackmap_copy() with this_cpu_inc(bpf_prog_active)
to prevent tracing bpf_prog from running.
A later syscall's map_lookup_elem commit
f1a2e44a3aec ("bpf: add queue and stack maps")
also acquires a spinlock and races with tracing bpf_prog similarly.
Hence, this patch is forward looking and protects the majority
of the map lookups. bpf_map_offload_lookup_elem() is the exception
since it is for network bpf_prog only (i.e. never called by tracing
bpf_prog).
Fixes:
557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexei Starovoitov [Thu, 31 Jan 2019 02:12:44 +0000 (18:12 -0800)]
bpf: fix potential deadlock in bpf_prog_register
[ Upstream commit
e16ec34039c701594d55d08a5aa49ee3e1abc821 ]
Lockdep found a potential deadlock between cpu_hotplug_lock, bpf_event_mutex, and cpuctx_mutex:
[ 13.007000] WARNING: possible circular locking dependency detected
[ 13.007587] 5.0.0-rc3-00018-g2fa53f892422-dirty #477 Not tainted
[ 13.008124] ------------------------------------------------------
[ 13.008624] test_progs/246 is trying to acquire lock:
[ 13.009030]
0000000094160d1d (tracepoints_mutex){+.+.}, at: tracepoint_probe_register_prio+0x2d/0x300
[ 13.009770]
[ 13.009770] but task is already holding lock:
[ 13.010239]
00000000d663ef86 (bpf_event_mutex){+.+.}, at: bpf_probe_register+0x1d/0x60
[ 13.010877]
[ 13.010877] which lock already depends on the new lock.
[ 13.010877]
[ 13.011532]
[ 13.011532] the existing dependency chain (in reverse order) is:
[ 13.012129]
[ 13.012129] -> #4 (bpf_event_mutex){+.+.}:
[ 13.012582] perf_event_query_prog_array+0x9b/0x130
[ 13.013016] _perf_ioctl+0x3aa/0x830
[ 13.013354] perf_ioctl+0x2e/0x50
[ 13.013668] do_vfs_ioctl+0x8f/0x6a0
[ 13.014003] ksys_ioctl+0x70/0x80
[ 13.014320] __x64_sys_ioctl+0x16/0x20
[ 13.014668] do_syscall_64+0x4a/0x180
[ 13.015007] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 13.015469]
[ 13.015469] -> #3 (&cpuctx_mutex){+.+.}:
[ 13.015910] perf_event_init_cpu+0x5a/0x90
[ 13.016291] perf_event_init+0x1b2/0x1de
[ 13.016654] start_kernel+0x2b8/0x42a
[ 13.016995] secondary_startup_64+0xa4/0xb0
[ 13.017382]
[ 13.017382] -> #2 (pmus_lock){+.+.}:
[ 13.017794] perf_event_init_cpu+0x21/0x90
[ 13.018172] cpuhp_invoke_callback+0xb3/0x960
[ 13.018573] _cpu_up+0xa7/0x140
[ 13.018871] do_cpu_up+0xa4/0xc0
[ 13.019178] smp_init+0xcd/0xd2
[ 13.019483] kernel_init_freeable+0x123/0x24f
[ 13.019878] kernel_init+0xa/0x110
[ 13.020201] ret_from_fork+0x24/0x30
[ 13.020541]
[ 13.020541] -> #1 (cpu_hotplug_lock.rw_sem){++++}:
[ 13.021051] static_key_slow_inc+0xe/0x20
[ 13.021424] tracepoint_probe_register_prio+0x28c/0x300
[ 13.021891] perf_trace_event_init+0x11f/0x250
[ 13.022297] perf_trace_init+0x6b/0xa0
[ 13.022644] perf_tp_event_init+0x25/0x40
[ 13.023011] perf_try_init_event+0x6b/0x90
[ 13.023386] perf_event_alloc+0x9a8/0xc40
[ 13.023754] __do_sys_perf_event_open+0x1dd/0xd30
[ 13.024173] do_syscall_64+0x4a/0x180
[ 13.024519] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 13.024968]
[ 13.024968] -> #0 (tracepoints_mutex){+.+.}:
[ 13.025434] __mutex_lock+0x86/0x970
[ 13.025764] tracepoint_probe_register_prio+0x2d/0x300
[ 13.026215] bpf_probe_register+0x40/0x60
[ 13.026584] bpf_raw_tracepoint_open.isra.34+0xa4/0x130
[ 13.027042] __do_sys_bpf+0x94f/0x1a90
[ 13.027389] do_syscall_64+0x4a/0x180
[ 13.027727] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 13.028171]
[ 13.028171] other info that might help us debug this:
[ 13.028171]
[ 13.028807] Chain exists of:
[ 13.028807] tracepoints_mutex --> &cpuctx_mutex --> bpf_event_mutex
[ 13.028807]
[ 13.029666] Possible unsafe locking scenario:
[ 13.029666]
[ 13.030140] CPU0 CPU1
[ 13.030510] ---- ----
[ 13.030875] lock(bpf_event_mutex);
[ 13.031166] lock(&cpuctx_mutex);
[ 13.031645] lock(bpf_event_mutex);
[ 13.032135] lock(tracepoints_mutex);
[ 13.032441]
[ 13.032441] *** DEADLOCK ***
[ 13.032441]
[ 13.032911] 1 lock held by test_progs/246:
[ 13.033239] #0:
00000000d663ef86 (bpf_event_mutex){+.+.}, at: bpf_probe_register+0x1d/0x60
[ 13.033909]
[ 13.033909] stack backtrace:
[ 13.034258] CPU: 1 PID: 246 Comm: test_progs Not tainted 5.0.0-rc3-00018-g2fa53f892422-dirty #477
[ 13.034964] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
[ 13.035657] Call Trace:
[ 13.035859] dump_stack+0x5f/0x8b
[ 13.036130] print_circular_bug.isra.37+0x1ce/0x1db
[ 13.036526] __lock_acquire+0x1158/0x1350
[ 13.036852] ? lock_acquire+0x98/0x190
[ 13.037154] lock_acquire+0x98/0x190
[ 13.037447] ? tracepoint_probe_register_prio+0x2d/0x300
[ 13.037876] __mutex_lock+0x86/0x970
[ 13.038167] ? tracepoint_probe_register_prio+0x2d/0x300
[ 13.038600] ? tracepoint_probe_register_prio+0x2d/0x300
[ 13.039028] ? __mutex_lock+0x86/0x970
[ 13.039337] ? __mutex_lock+0x24a/0x970
[ 13.039649] ? bpf_probe_register+0x1d/0x60
[ 13.039992] ? __bpf_trace_sched_wake_idle_without_ipi+0x10/0x10
[ 13.040478] ? tracepoint_probe_register_prio+0x2d/0x300
[ 13.040906] tracepoint_probe_register_prio+0x2d/0x300
[ 13.041325] bpf_probe_register+0x40/0x60
[ 13.041649] bpf_raw_tracepoint_open.isra.34+0xa4/0x130
[ 13.042068] ? __might_fault+0x3e/0x90
[ 13.042374] __do_sys_bpf+0x94f/0x1a90
[ 13.042678] do_syscall_64+0x4a/0x180
[ 13.042975] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 13.043382] RIP: 0033:0x7f23b10a07f9
[ 13.045155] RSP: 002b:
00007ffdef42fdd8 EFLAGS:
00000202 ORIG_RAX:
0000000000000141
[ 13.045759] RAX:
ffffffffffffffda RBX:
00007ffdef42ff70 RCX:
00007f23b10a07f9
[ 13.046326] RDX:
0000000000000070 RSI:
00007ffdef42fe10 RDI:
0000000000000011
[ 13.046893] RBP:
00007ffdef42fdf0 R08:
0000000000000038 R09:
00007ffdef42fe10
[ 13.047462] R10:
0000000000000000 R11:
0000000000000202 R12:
0000000000000000
[ 13.048029] R13:
0000000000000016 R14:
00007f23b1db4690 R15:
0000000000000000
Since tracepoints_mutex will be taken in tracepoint_probe_register/unregister()
there is no need to take bpf_event_mutex too.
bpf_event_mutex is protecting modifications to prog array used in kprobe/perf bpf progs.
bpf_raw_tracepoints don't need to take this mutex.
Fixes:
c4f6699dfcb8 ("bpf: introduce BPF_RAW_TRACEPOINT")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexei Starovoitov [Thu, 31 Jan 2019 02:12:43 +0000 (18:12 -0800)]
bpf: fix lockdep false positive in percpu_freelist
[ Upstream commit
a89fac57b5d080771efd4d71feaae19877cf68f0 ]
Lockdep warns about false positive:
[ 12.492084]
00000000e6b28347 (&head->lock){+...}, at: pcpu_freelist_push+0x2a/0x40
[ 12.492696] but this lock was taken by another, HARDIRQ-safe lock in the past:
[ 12.493275] (&rq->lock){-.-.}
[ 12.493276]
[ 12.493276]
[ 12.493276] and interrupts could create inverse lock ordering between them.
[ 12.493276]
[ 12.494435]
[ 12.494435] other info that might help us debug this:
[ 12.494979] Possible interrupt unsafe locking scenario:
[ 12.494979]
[ 12.495518] CPU0 CPU1
[ 12.495879] ---- ----
[ 12.496243] lock(&head->lock);
[ 12.496502] local_irq_disable();
[ 12.496969] lock(&rq->lock);
[ 12.497431] lock(&head->lock);
[ 12.497890] <Interrupt>
[ 12.498104] lock(&rq->lock);
[ 12.498368]
[ 12.498368] *** DEADLOCK ***
[ 12.498368]
[ 12.498837] 1 lock held by dd/276:
[ 12.499110] #0:
00000000c58cb2ee (rcu_read_lock){....}, at: trace_call_bpf+0x5e/0x240
[ 12.499747]
[ 12.499747] the shortest dependencies between 2nd lock and 1st lock:
[ 12.500389] -> (&rq->lock){-.-.} {
[ 12.500669] IN-HARDIRQ-W at:
[ 12.500934] _raw_spin_lock+0x2f/0x40
[ 12.501373] scheduler_tick+0x4c/0xf0
[ 12.501812] update_process_times+0x40/0x50
[ 12.502294] tick_periodic+0x27/0xb0
[ 12.502723] tick_handle_periodic+0x1f/0x60
[ 12.503203] timer_interrupt+0x11/0x20
[ 12.503651] __handle_irq_event_percpu+0x43/0x2c0
[ 12.504167] handle_irq_event_percpu+0x20/0x50
[ 12.504674] handle_irq_event+0x37/0x60
[ 12.505139] handle_level_irq+0xa7/0x120
[ 12.505601] handle_irq+0xa1/0x150
[ 12.506018] do_IRQ+0x77/0x140
[ 12.506411] ret_from_intr+0x0/0x1d
[ 12.506834] _raw_spin_unlock_irqrestore+0x53/0x60
[ 12.507362] __setup_irq+0x481/0x730
[ 12.507789] setup_irq+0x49/0x80
[ 12.508195] hpet_time_init+0x21/0x32
[ 12.508644] x86_late_time_init+0xb/0x16
[ 12.509106] start_kernel+0x390/0x42a
[ 12.509554] secondary_startup_64+0xa4/0xb0
[ 12.510034] IN-SOFTIRQ-W at:
[ 12.510305] _raw_spin_lock+0x2f/0x40
[ 12.510772] try_to_wake_up+0x1c7/0x4e0
[ 12.511220] swake_up_locked+0x20/0x40
[ 12.511657] swake_up_one+0x1a/0x30
[ 12.512070] rcu_process_callbacks+0xc5/0x650
[ 12.512553] __do_softirq+0xe6/0x47b
[ 12.512978] irq_exit+0xc3/0xd0
[ 12.513372] smp_apic_timer_interrupt+0xa9/0x250
[ 12.513876] apic_timer_interrupt+0xf/0x20
[ 12.514343] default_idle+0x1c/0x170
[ 12.514765] do_idle+0x199/0x240
[ 12.515159] cpu_startup_entry+0x19/0x20
[ 12.515614] start_kernel+0x422/0x42a
[ 12.516045] secondary_startup_64+0xa4/0xb0
[ 12.516521] INITIAL USE at:
[ 12.516774] _raw_spin_lock_irqsave+0x38/0x50
[ 12.517258] rq_attach_root+0x16/0xd0
[ 12.517685] sched_init+0x2f2/0x3eb
[ 12.518096] start_kernel+0x1fb/0x42a
[ 12.518525] secondary_startup_64+0xa4/0xb0
[ 12.518986] }
[ 12.519132] ... key at: [<
ffffffff82b7bc28>] __key.71384+0x0/0x8
[ 12.519649] ... acquired at:
[ 12.519892] pcpu_freelist_pop+0x7b/0xd0
[ 12.520221] bpf_get_stackid+0x1d2/0x4d0
[ 12.520563] ___bpf_prog_run+0x8b4/0x11a0
[ 12.520887]
[ 12.521008] -> (&head->lock){+...} {
[ 12.521292] HARDIRQ-ON-W at:
[ 12.521539] _raw_spin_lock+0x2f/0x40
[ 12.521950] pcpu_freelist_push+0x2a/0x40
[ 12.522396] bpf_get_stackid+0x494/0x4d0
[ 12.522828] ___bpf_prog_run+0x8b4/0x11a0
[ 12.523296] INITIAL USE at:
[ 12.523537] _raw_spin_lock+0x2f/0x40
[ 12.523944] pcpu_freelist_populate+0xc0/0x120
[ 12.524417] htab_map_alloc+0x405/0x500
[ 12.524835] __do_sys_bpf+0x1a3/0x1a90
[ 12.525253] do_syscall_64+0x4a/0x180
[ 12.525659] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 12.526167] }
[ 12.526311] ... key at: [<
ffffffff838f7668>] __key.13130+0x0/0x8
[ 12.526812] ... acquired at:
[ 12.527047] __lock_acquire+0x521/0x1350
[ 12.527371] lock_acquire+0x98/0x190
[ 12.527680] _raw_spin_lock+0x2f/0x40
[ 12.527994] pcpu_freelist_push+0x2a/0x40
[ 12.528325] bpf_get_stackid+0x494/0x4d0
[ 12.528645] ___bpf_prog_run+0x8b4/0x11a0
[ 12.528970]
[ 12.529092]
[ 12.529092] stack backtrace:
[ 12.529444] CPU: 0 PID: 276 Comm: dd Not tainted 5.0.0-rc3-00018-g2fa53f892422 #475
[ 12.530043] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
[ 12.530750] Call Trace:
[ 12.530948] dump_stack+0x5f/0x8b
[ 12.531248] check_usage_backwards+0x10c/0x120
[ 12.531598] ? ___bpf_prog_run+0x8b4/0x11a0
[ 12.531935] ? mark_lock+0x382/0x560
[ 12.532229] mark_lock+0x382/0x560
[ 12.532496] ? print_shortest_lock_dependencies+0x180/0x180
[ 12.532928] __lock_acquire+0x521/0x1350
[ 12.533271] ? find_get_entry+0x17f/0x2e0
[ 12.533586] ? find_get_entry+0x19c/0x2e0
[ 12.533902] ? lock_acquire+0x98/0x190
[ 12.534196] lock_acquire+0x98/0x190
[ 12.534482] ? pcpu_freelist_push+0x2a/0x40
[ 12.534810] _raw_spin_lock+0x2f/0x40
[ 12.535099] ? pcpu_freelist_push+0x2a/0x40
[ 12.535432] pcpu_freelist_push+0x2a/0x40
[ 12.535750] bpf_get_stackid+0x494/0x4d0
[ 12.536062] ___bpf_prog_run+0x8b4/0x11a0
It has been explained that is a false positive here:
https://lkml.org/lkml/2018/7/25/756
Recap:
- stackmap uses pcpu_freelist
- The lock in pcpu_freelist is a percpu lock
- stackmap is only used by tracing bpf_prog
- A tracing bpf_prog cannot be run if another bpf_prog
has already been running (ensured by the percpu bpf_prog_active counter).
Eric pointed out that this lockdep splats stops other
legit lockdep splats in selftests/bpf/test_progs.c.
Fix this by calling local_irq_save/restore for stackmap.
Another false positive had also been worked around by calling
local_irq_save in commit
89ad2fa3f043 ("bpf: fix lockdep splat").
That commit added unnecessary irq_save/restore to fast path of
bpf hash map. irqs are already disabled at that point, since htab
is holding per bucket spin_lock with irqsave.
Let's reduce overhead for htab by introducing __pcpu_freelist_push/pop
function w/o irqsave and convert pcpu_freelist_push/pop to irqsave
to be used elsewhere (right now only in stackmap).
It stops lockdep false positive in stackmap with a bit of acceptable overhead.
Fixes:
557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martynas Pumputis [Thu, 31 Jan 2019 09:19:33 +0000 (10:19 +0100)]
bpf, selftests: fix handling of sparse CPU allocations
[ Upstream commit
1bb54c4071f585ebef56ce8fdfe6026fa2cbcddd ]
Previously, bpf_num_possible_cpus() had a bug when calculating a
number of possible CPUs in the case of sparse CPU allocations, as
it was considering only the first range or element of
/sys/devices/system/cpu/possible.
E.g. in the case of "0,2-3" (CPU 1 is not available), the function
returned 1 instead of 3.
This patch fixes the function by making it parse all CPU ranges and
elements.
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Thu, 31 Jan 2019 12:57:58 +0000 (13:57 +0100)]
relay: check return of create_buf_file() properly
[ Upstream commit
2c1cf00eeacb784781cf1c9896b8af001246d339 ]
If create_buf_file() returns an error, don't try to reference it later
as a valid dentry pointer.
This problem was exposed when debugfs started to return errors instead
of just NULL for some calls when they do not succeed properly.
Also, the check for WARN_ON(dentry) was just wrong :)
Reported-by: Kees Cook <keescook@chromium.org>
Reported-and-tested-by: syzbot+16c3a70e1e9b29346c43@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Fixes:
ff9fb72bc077 ("debugfs: return error values, not NULL")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zenghui Yu [Thu, 31 Jan 2019 11:19:43 +0000 (11:19 +0000)]
irqchip/gic-v3-its: Fix ITT_entry_size accessor
[ Upstream commit
56841070ccc87b463ac037d2d1f2beb8e5e35f0c ]
According to ARM IHI 0069C (ID070116), we should use GITS_TYPER's
bits [7:4] as ITT_entry_size instead of [8:4]. Although this is
pretty annoying, it only results in a potential over-allocation
of memory, and nothing bad happens.
Fixes:
3dfa576bfb45 ("irqchip/gic-v3-its: Add probing for VLPI properties")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
[maz: massaged subject and commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jose Abreu [Wed, 30 Jan 2019 14:54:21 +0000 (15:54 +0100)]
net: stmmac: Disable EEE mode earlier in XMIT callback
[ Upstream commit
e2cd682deb231ba6f80524bb84e57e7138261149 ]
In stmmac xmit callback we use a different flow for TSO packets but TSO
xmit callback is not disabling the EEE mode.
Fix this by disabling earlier the EEE mode, i.e. before calling the TSO
xmit callback.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jose Abreu [Wed, 30 Jan 2019 14:54:20 +0000 (15:54 +0100)]
net: stmmac: Send TSO packets always from Queue 0
[ Upstream commit
c5acdbee22a1b200dde07effd26fd1f649e9ab8a ]
The number of TSO enabled channels in HW can be different than the
number of total channels. There is no way to determined, at runtime, the
number of TSO capable channels and its safe to assume that if TSO is
enabled then at least channel 0 will be TSO capable.
Lets always send TSO packets from Queue 0.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jose Abreu [Wed, 30 Jan 2019 14:54:19 +0000 (15:54 +0100)]
net: stmmac: Fallback to Platform Data clock in Watchdog conversion
[ Upstream commit
4ec5302fa906ec9d86597b236f62315bacdb9622 ]
If we don't have DT then stmmac_clk will not be available. Let's add a
new Platform Data field so that we can specify the refclk by this mean.
This way we can still use the coalesce command in PCI based setups.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chris Wilson [Wed, 30 Jan 2019 10:55:17 +0000 (10:55 +0000)]
drm/amdgpu: Transfer fences to dmabuf importer
[ Upstream commit
6e11ea9de9576a644045ffdc2067c09bc2012eda ]
amdgpu only uses shared-fences internally, but dmabuf importers rely on
implicit write hazard tracking via the reservation_object.fence_excl.
For example, the importer use the write hazard for timing a page flip to
only occur after the exporter has finished flushing its write into the
surface. As such, on exporting a dmabuf, we must either flush all
outstanding fences (for we do not know which are writes and should have
been exclusive) or alternatively create a new exclusive fence that is
the composite of all the existing shared fences, and so will only be
signaled when all earlier fences are signaled (ensuring that we can not
be signaled before the completion of any earlier write).
v2: reservation_object is already locked by amdgpu_bo_reserve()
v3: Replace looping with get_fences_rcu and special case the promotion
of a single shared fence directly to an exclusive fence, bypassing the
fence array.
v4: Drop the fence array ref after assigning to reservation_object
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107341
Testcase: igt/amd_prime/amd-to-i915
References:
8e94a46c1770 ("drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Reviewed-by: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Deucher [Tue, 15 Jan 2019 17:05:16 +0000 (12:05 -0500)]
drm/radeon: check if device is root before getting pci speed caps
[ Upstream commit
afeff4c16edaa6275b903f82b0561406259aa3a3 ]
Check if the device is root rather before attempting to see what
speeds the pcie port supports. Fixes a crash with pci passthrough
in a VM.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109366
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Deucher [Thu, 10 Jan 2019 03:19:28 +0000 (22:19 -0500)]
drm/amdgpu: Add missing power attribute to APU check
[ Upstream commit
dc14eb12f6bb3e779c5461429c1889a339c67aab ]
Add missing power_average to visible check for power
attributes for APUs. Was missed before.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lubomir Rintel [Mon, 28 Jan 2019 15:59:35 +0000 (16:59 +0100)]
irqchip/mmp: Only touch the PJ4 IRQ & FIQ bits on enable/disable
[ Upstream commit
2380a22b60ce6f995eac806e69c66e397b59d045 ]
Resetting bit 4 disables the interrupt delivery to the "secure
processor" core. This breaks the keyboard on a OLPC XO 1.75 laptop,
where the firmware running on the "secure processor" bit-bangs the
PS/2 protocol over the GPIO lines.
It is not clear what the rest of the bits are and Marvell was unhelpful
when asked for documentation. Aside from the SP bit, there are probably
priority bits.
Leaving the unknown bits as the firmware set them up seems to be a wiser
course of action compared to just turning them off.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
[maz: fixed-up subject and commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marc Zyngier [Tue, 29 Jan 2019 15:19:23 +0000 (15:19 +0000)]
irqchip/gic-v3-its: Gracefully fail on LPI exhaustion
[ Upstream commit
45725e0fc3e7fe52fedb94f59806ec50e9618682 ]
In the unlikely event that we cannot find any available LPI in the
system, we should gracefully return an error instead of carrying
on with no LPI allocated at all.
Fixes:
38dd7c494cf6 ("irqchip/gic-v3-its: Drop chunk allocation compatibility")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heyi Guo [Thu, 24 Jan 2019 13:37:08 +0000 (21:37 +0800)]
irqchip/gic-v4: Fix occasional VLPI drop
[ Upstream commit
6479450f72c1391c03f08affe0d0110f41ae7ca0 ]
1. In current implementation, every VLPI will temporarily be mapped to
the first CPU in system (normally CPU0) and then moved to the real
scheduled CPU later.
2. So there is a time window and a VLPI may be sent to CPU0 instead of
the real scheduled vCPU, in a multi-CPU virtual machine.
3. However, CPU0 may have not been scheduled as a virtual CPU after
system boots up, so the value of its GICR_VPROPBASER is unknown at
that moment.
4. If the INTID of VLPI is larger than 2^(GICR_VPROPBASER.IDbits+1),
while IDbits is also in unknown state, GIC will behave as if the VLPI
is out of range and simply drop it, which results in interrupt missing
in Guest.
As no code will clear GICR_VPROPBASER at runtime, we can safely
initialize the IDbits field at boot time for each CPU to get rid of
this issue.
We also clear Valid bit of GICR_VPENDBASER in case any ancient
programming gets left in and causes memory corrupting. A new function
its_clear_vpend_valid() is added to reuse the code in
its_vpe_deschedule().
Fixes:
e643d8034036 ("irqchip/gic-v3-its: Add VPE scheduling")
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anders Roxell [Tue, 22 Jan 2019 10:36:02 +0000 (11:36 +0100)]
usb: phy: fix link errors
[ Upstream commit
f2105d42597f4d10e431b195d69e96dccaf9b012 ]
Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is
set to module then the following link error occurs.
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl':
drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp':
drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host':
drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp':
drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum':
drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral':
drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
make[1]: *** [Makefile:1020: vmlinux] Error 1
make[1]: Target 'Image' not remade because of errors.
make: *** [Makefile:152: sub-make] Error 2
make: Target 'Image' not remade because of errors.
Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhou Yanjie [Thu, 24 Jan 2019 18:22:15 +0000 (02:22 +0800)]
DTS: CI20: Fix bugs in ci20's device tree.
[ Upstream commit
1ca1c87f91d9dc50d6a38e2177b2032996e7901c ]
According to the Schematic, the hardware of ci20 leads to uart3,
but not to uart2. Uart2 is miswritten in the original code.
Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips <linux-mips@vger.kernel.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Cc: devicetree@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: mark.rutland@arm.com
Cc: malat@debian.org
Cc: ezequiel@collabora.co.uk
Cc: ulf.hansson@linaro.org
Cc: syq <syq@debian.org>
Cc: jiaxun.yang <jiaxun.yang@flygoat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Felix Fietkau [Fri, 25 Jan 2019 07:21:26 +0000 (08:21 +0100)]
batman-adv: release station info tidstats
[ Upstream commit
7d652669b61d702c6e62a39579d17f6881670ab6 ]
With the addition of TXQ stats in the per-tid statistics the struct
station_info grew significantly. This resulted in stack size warnings
due to the structure itself being above the limit for the warnings.
To work around this, the TID array was allocated dynamically. Also a
function to free this content was introduced with commit
7ea3e110f2f8
("cfg80211: release station info tidstats where needed") but the necessary
changes were not provided for batman-adv's B.A.T.M.A.N. V implementation.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fixes:
8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info")
[sven@narfation.org: add commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivas Kandagatla [Mon, 10 Dec 2018 13:56:33 +0000 (13:56 +0000)]
arm64: dts: add msm8996 compatible to gicv3
[ Upstream commit
2a81efb0de0e33f2d2c83154af0bd3ce389b3269 ]
Add compatible to gicv3 node to enable quirk required to restrict writing
to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor.
With this quirk MSM8996 can at least boot out of mainline, which can help
community to work with boards based on MSM8996.
Without this patch Qualcomm DB820c board reboots on mainline.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peng Hao [Sat, 29 Dec 2018 05:10:06 +0000 (13:10 +0800)]
ARM: pxa: ssp: unneeded to free devm_ allocated data
[ Upstream commit
ba16adeb346387eb2d1ada69003588be96f098fa ]
devm_ allocated data will be automatically freed. The free
of devm_ allocated data is invalid.
Fixes:
1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
[title's prefix changed]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yafang Shao [Wed, 23 Jan 2019 04:37:19 +0000 (12:37 +0800)]
bpf: sock recvbuff must be limited by rmem_max in bpf_setsockopt()
[ Upstream commit
c9e4576743eeda8d24dedc164d65b78877f9a98c ]
When sock recvbuff is set by bpf_setsockopt(), the value must by
limited by rmem_max. It is the same with sendbuff.
Fixes:
8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Abeni [Mon, 21 Jan 2019 11:36:12 +0000 (12:36 +0100)]
bpftool: fix percpu maps updating
[ Upstream commit
b0ca5ecb8e2279d706261f525f1bd0ba9e3fe800 ]
When updating a percpu map, bpftool currently copies the provided
value only into the first per CPU copy of the specified value,
all others instances are left zeroed.
This change explicitly copies the user-provided bytes to all the
per CPU instances, keeping the sub-command syntax unchanged.
v2 -> v3:
- drop unused argument, as per Quentin's suggestion
v1 -> v2:
- rename the helper as per Quentin's suggestion
Fixes:
71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Olsa [Fri, 18 Jan 2019 12:58:17 +0000 (13:58 +0100)]
bpftool: Fix prog dump by tag
[ Upstream commit
752bcf80f5549c9901b2e8bc77b2138de55b1026 ]
Lance reported an issue with bpftool not being able to
dump program if there are more programs loaded and you
want to dump any but the first program, like:
# bpftool prog
28: kprobe name trace_req_start tag
1dfc28ba8b3dd597 gpl
loaded_at 2019-01-18T17:02:40+1100 uid 0
xlated 112B jited 109B memlock 4096B map_ids 13
29: kprobe name trace_req_compl tag
5b6a5ecc6030a683 gpl
loaded_at 2019-01-18T17:02:40+1100 uid 0
xlated 928B jited 575B memlock 4096B map_ids 13,14
# bpftool prog dum jited tag
1dfc28ba8b3dd597
0: push %rbp
1: mov %rsp,%rbp
...
# bpftool prog dum jited tag
5b6a5ecc6030a683
Error: can't get prog info (29): Bad address
The problem is in the prog_fd_by_tag function not cleaning
the struct bpf_prog_info before another request, so the
previous program length is still in there and kernel assumes
it needs to dump the program, which fails because there's no
user pointer set.
Moving the struct bpf_prog_info declaration into the loop,
so it gets cleaned before each query.
Fixes:
71bb428fe2c1 ("tools: bpf: add bpftool")
Reported-by: Lance Digby <ldigby@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ulf Hansson [Wed, 16 Jan 2019 11:37:23 +0000 (12:37 +0100)]
wlcore: sdio: Fixup power on/off sequence
[ Upstream commit
13e62626c578d9889ebbda7c521be5adff9bef8e ]
During "wlan-up", we are programming the FW into the WiFi-chip. However,
re-programming the FW doesn't work, unless a power cycle of the WiFi-chip
is made in-between the programmings.
To conform to this requirement and to fix the regression in a simple way,
let's start by allowing that the SDIO card (WiFi-chip) may stay powered on
(runtime resumed) when wl12xx_sdio_power_off() returns. The intent with the
current code is to treat this scenario as an error, but unfortunate this
doesn't work as expected, so let's fix this.
The other part is to guarantee that a power cycle of the SDIO card has been
completed when wl12xx_sdio_power_on() returns, as to allow the FW
programming to succeed. However, relying solely on runtime PM to deal with
this isn't sufficient. For example, userspace may prevent runtime suspend
via sysfs for the device that represents the SDIO card, leading to that the
mmc core also keeps it powered on. For this reason, let's instead do a
brute force power cycle in wl12xx_sdio_power_on().
Fixes:
728a9dc61f13 ("wlcore: sdio: Fix flakey SDIO runtime PM handling")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Kridner [Fri, 11 Jan 2019 15:02:13 +0000 (10:02 -0500)]
pinctrl: mcp23s08: spi: Fix regmap allocation for mcp23s18
[ Upstream commit
f165988b77ef849eb0c1aebd94fe778024f88314 ]
Fixes issue created by
9b3e4207661e67f04c72af15e29f74cd944f5964.
It wasn't possible for one_regmap_config to be non-NULL at the point
it was tested for mcp23s18 devices.
Applied the same pattern of allocating one_regmap_config using
devm_kmemdump() and then initializing the local regmap structure
from that.
Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Madalin Bucur [Fri, 21 Dec 2018 14:41:42 +0000 (16:41 +0200)]
soc: fsl: qbman: avoid race in clearing QMan interrupt
[ Upstream commit
89857a8a5c89a406b967ab2be7bd2ccdbe75e73d ]
By clearing all interrupt sources, not only those that
already occurred, the existing code may acknowledge by
mistake interrupts that occurred after the code checks
for them.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Thu, 10 Jan 2019 13:39:16 +0000 (14:39 +0100)]
arm64: dts: renesas: r8a77965: Enable DMA for SCIF2
[ Upstream commit
05c8478abd485507c25aa565afab604af8d8fe46 ]
SCIF2 on R-Car M3-N can be used with both DMAC1 and DMAC2.
Fixes:
0ea5b2fd38db56aa ("arm64: dts: renesas: r8a77965: Add SCIF device nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Thu, 10 Jan 2019 13:39:15 +0000 (14:39 +0100)]
arm64: dts: renesas: r8a7796: Enable DMA for SCIF2
[ Upstream commit
97f26702bc95b5c3a72671d5c6675e4d6ee0a2f4 ]
SCIF2 on R-Car M3-W can be used with both DMAC1 and DMAC2.
Fixes:
dbcae5ea4bd27409 ("arm64: dts: r8a7796: Enable SCIF DMA")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anson Huang [Sat, 29 Dec 2018 10:01:18 +0000 (10:01 +0000)]
ARM: dts: imx6sx: correct backward compatible of gpt
[ Upstream commit
ba0f4560526ba19300c07ed5a3c1df7592815dc6 ]
i.MX6SX has same GPT type as i.MX6DL, in GPT driver, it uses
below TIMER_OF_DECLARE, so the backward compatible should be
"fsl,imx6dl-gpt", correct it.
TIMER_OF_DECLARE(imx6sx_timer, "fsl,imx6sx-gpt", imx6dl_timer_init_dt);
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Sat, 29 Dec 2018 12:57:11 +0000 (13:57 +0100)]
ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low
[ Upstream commit
8615f5596335db0978cea593dcd0070dc5f8b116 ]
After commit
89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device
tree") SD cards are not detected anymore.
The CD GPIO is "active low" on the MXIII-Plus. The MMC dt-bindings
specify: "[...] using the "cd-inverted" property means, that the CD line
is active high, i.e. it is high, when a card is inserted".
Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and
drop the "cd-inverted" property. This makes the definition consistent
with the existing dt-bindings and fixes the check whether an SD card is
inserted.
Fixes:
35ee52bea66c74 ("ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Sat, 29 Dec 2018 12:57:09 +0000 (13:57 +0100)]
ARM: dts: meson8b: odroidc1: mark the SD card detection GPIO active-low
[ Upstream commit
3fb348e030319f20ebbde082a449d4bf8a96f2fd ]
After commit
89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device
tree") SD cards are not detected anymore.
The CD GPIO is "active low" on Odroid-C1. The MMC dt-bindings specify:
"[...] using the "cd-inverted" property means, that the CD line is active
high, i.e. it is high, when a card is inserted".
Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and
drop the "cd-inverted" property. This makes the definition consistent
with the existing dt-bindings and fixes the check whether an SD card is
inserted.
Fixes:
e03efbce6bebf5 ("ARM: dts: meson8b-odroidc1: add microSD support")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Carlo Caione [Fri, 7 Dec 2018 10:52:31 +0000 (10:52 +0000)]
arm: dts: meson: Fix IRQ trigger type for macirq
[ Upstream commit
e35e26b26e955c53e61c154ba26b9bb15da6b858 ]
A long running stress test on a custom board shipping an AXG SoCs and a
Realtek RTL8211F PHY revealed that after a few hours the connection
speed would drop drastically, from ~1000Mbps to ~3Mbps. At the same time
the 'macirq' (eth0) IRQ would stop being triggered at all and as
consequence the GMAC IRQs never ACKed.
After a painful investigation the problem seemed to be due to a wrong
defined IRQ type for the GMAC IRQ that should be LEVEL_HIGH instead of
EDGE_RISING.
The change in the macirq IRQ type also solved another long standing
issue affecting this SoC/PHY where EEE was causing the network
connection to die after stressing it with iperf3 (even though much
sooner). It's now possible to remove the 'eee-broken-1000t' quirk as
well.
Fixes:
9c15795a4f96 ("ARM: dts: meson8b-odroidc1: ethernet support")
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jernej Skrabec [Tue, 8 Jan 2019 19:18:40 +0000 (20:18 +0100)]
ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2
[ Upstream commit
cc4bddade114b696ab27c1a77cfc7040151306da ]
Because "ethernet0" alias is missing, U-Boot doesn't generate board
specific MAC address. Effect of this is random MAC address every boot
and thus new IP address is assigned to the board.
Fix this by adding alias.
Fixes:
7389172fc3ed ("ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[Maxime: Removed unneeded comment]
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Mon, 7 Jan 2019 17:52:43 +0000 (09:52 -0800)]
ARM: dts: omap4-droid4: Fix typo in cpcap IRQ flags
[ Upstream commit
ef4a55b9197a8f844ea0663138e902dcce3e2f36 ]
We're now getting the following error:
genirq: Setting trigger mode 1 for irq 230 failed
(regmap_irq_set_type+0x0/0x15c)
cpcap-usb-phy cpcap-usb-phy.0: could not get irq dp: -524
Cc: Sebastian Reichel <sre@kernel.org>
Reported-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aaro Koskinen [Sun, 23 Dec 2018 18:24:13 +0000 (20:24 +0200)]
ARM: OMAP: dts: N950/N9: fix onenand timings
[ Upstream commit
8443e4843e1c2594bf5664e1d993a1be71d1befb ]
Commit
a758f50f10cf ("mtd: onenand: omap2: Configure driver from DT")
started using DT specified timings for GPMC, and as a result the
OneNAND stopped working on N950/N9 as we had wrong values in the DT.
Fix by updating the values to bootloader timings that have been tested
to be working on both Nokia N950 and N9.
Fixes:
a758f50f10cf ("mtd: onenand: omap2: Configure driver from DT")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Hocko [Thu, 21 Feb 2019 06:20:46 +0000 (22:20 -0800)]
mm, memory_hotplug: fix off-by-one in is_pageblock_removable
[ Upstream commit
891cb2a72d821f930a39d5900cb7a3aa752c1d5b ]
Rong Chen has reported the following boot crash:
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 239 Comm: udevd Not tainted 5.0.0-rc4-00149-gefad4e4 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
RIP: 0010:page_mapping+0x12/0x80
Code: 5d c3 48 89 df e8 0e ad 02 00 85 c0 75 da 89 e8 5b 5d c3 0f 1f 44 00 00 53 48 89 fb 48 8b 43 08 48 8d 50 ff a8 01 48 0f 45 da <48> 8b 53 08 48 8d 42 ff 83 e2 01 48 0f 44 c3 48 83 38 ff 74 2f 48
RSP: 0018:
ffff88801fa87cd8 EFLAGS:
00010202
RAX:
ffffffffffffffff RBX:
fffffffffffffffe RCX:
000000000000000a
RDX:
fffffffffffffffe RSI:
ffffffff820b9a20 RDI:
ffff88801e5c0000
RBP:
6db6db6db6db6db7 R08:
ffff88801e8bb000 R09:
0000000001b64d13
R10:
ffff88801fa87cf8 R11:
0000000000000001 R12:
ffff88801e640000
R13:
ffffffff820b9a20 R14:
ffff88801f145258 R15:
0000000000000001
FS:
00007fb2079817c0(0000) GS:
ffff88801dd00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000006 CR3:
000000001fa82000 CR4:
00000000000006a0
Call Trace:
__dump_page+0x14/0x2c0
is_mem_section_removable+0x24c/0x2c0
removable_show+0x87/0xa0
dev_attr_show+0x25/0x60
sysfs_kf_seq_show+0xba/0x110
seq_read+0x196/0x3f0
__vfs_read+0x34/0x180
vfs_read+0xa0/0x150
ksys_read+0x44/0xb0
do_syscall_64+0x5e/0x4a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
and bisected it down to commit
efad4e475c31 ("mm, memory_hotplug:
is_mem_section_removable do not pass the end of a zone").
The reason for the crash is that the mapping is garbage for poisoned
(uninitialized) page. This shouldn't happen as all pages in the zone's
boundary should be initialized.
Later debugging revealed that the actual problem is an off-by-one when
evaluating the end_page. 'start_pfn + nr_pages' resp 'zone_end_pfn'
refers to a pfn after the range and as such it might belong to a
differen memory section.
This along with CONFIG_SPARSEMEM then makes the loop condition
completely bogus because a pointer arithmetic doesn't work for pages
from two different sections in that memory model.
Fix the issue by reworking is_pageblock_removable to be pfn based and
only use struct page where necessary. This makes the code slightly
easier to follow and we will remove the problematic pointer arithmetic
completely.
Link: http://lkml.kernel.org/r/20190218181544.14616-1-mhocko@kernel.org
Fixes:
efad4e475c31 ("mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: <rong.a.chen@intel.com>
Tested-by: <rong.a.chen@intel.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ian Kent [Fri, 1 Feb 2019 22:21:29 +0000 (14:21 -0800)]
autofs: fix error return in autofs_fill_super()
[ Upstream commit
f585b283e3f025754c45bbe7533fc6e5c4643700 ]
In autofs_fill_super() on error of get inode/make root dentry the return
should be ENOMEM as this is the only failure case of the called
functions.
Link: http://lkml.kernel.org/r/154725123240.11260.796773942606871359.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi3.git / log