arm64: dts: qcom: sm8450: Add missing interconnect paths to USB HC

The USB HC node is missing the interconnect paths, so add them.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230602062016.1883171-6-abel.vesa@linaro.org

arm64: dts: qcom: sm8350: Add missing interconnect paths to USB HCs

The USB HCs nodes are missing the interconnect paths, so add them.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230602062016.1883171-5-abel.vesa@linaro.org

arm64: dts: qcom: sm8250: Add missing interconnect paths to USB HCs

The USB HCs nodes are missing the interconnect paths, so add them.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230602062016.1883171-4-abel.vesa@linaro.org

arm64: dts: qcom: sm8250: Use 2 interconnect cells

Use two interconnect cells in order to optionally support a path tag.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230602062016.1883171-3-abel.vesa@linaro.org

arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs

The USB HCs nodes are missing the interconnect paths, so add them.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230602062016.1883171-2-abel.vesa@linaro.org

arm64: dts: qcom: sm8150: Use 2 interconnect cells

Use two interconnect cells in order to optionally support a path tag.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230602062016.1883171-1-abel.vesa@linaro.org

arm64: dts: qcom: sm8250-edo: Panel framebuffer is 2.5k instead of 4k

The framebuffer configuration for edo pdx203, written in edo dtsi (which
is overwritten in pdx206 dts for its smaller panel) has to use a
1096x2560 configuration as this is what the panel (and framebuffer area)
has been initialized to.  Downstream userspace also has access to (and
uses) this 2.5k mode by default, and only switches the panel to 4k when
requested.

This is similar to commit be8de06dc397 ("arm64: dts: qcom:
sm8150-kumano: Panel framebuffer is 2.5k instead of 4k") which fixed the
same for the previous generation Sony platform.

Fixes: 69cdb97ef652 ("arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230606211418.587676-1-marijn.suijten@somainline.org

arm64: dts: qcom: qcm2290: Add CPU idle states

Add the (scarce) idle states for the individual CPUs, as well as the
whole cluster. This enables deeper-than-WFI cpuidle

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230606-topic-qcm2290_idlestates-v2-1-580a5a2d28c9@linaro.org

dt-bindings: arm: qcom: Add Samsung Galaxy Express

Add a compatible for Samsung Galaxy Express SGH-I437.

Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230607050025.86636-2-guptarud@gmail.com

arm64: dts: qcom: ipq9574: add thermal zone nodes

This patch adds thermal zone nodes for the various
sensors present in IPQ9574

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/404c88e9746b3f25585aef078861ec2c273232d5.1686125196.git.quic_varada@quicinc.com

arm64: dts: qcom: ipq9574: add tsens node

IPQ9574 has a tsens v2.3.1 peripheral which monitors temperatures
around the various subsystems on the die.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/00fa16039db78dcb919bd15444bbf86ff3a340d6.1686125196.git.quic_varada@quicinc.com

arm64: dts: qcom: ipq8074: add critical thermal trips

According to bindings, thermal zones must have associated trips as well.
Since we currently dont have CPUFreq support and thus no passive cooling
lets start by defining critical trips to protect the devices against
severe overheating.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com

arm64: dts: qcom: msm8996pro: Add CBF scaling support

Add opp-peak-kBps to CPU OPPs to allow for CBF scaling, and change the
CBF compatible to reflect the difference between it and the one on
MSM8996.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230527093934.101335-3-y.oudjana@protonmail.com

arm64: dts: qcom: sdm845-xiaomi-beryllium: enable pmi8998 charger

Enable the pmi8998 charger and define some basic battery properties.

Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524-pmi8998-charger-dts-v2-5-2a5c77d2ff0c@linaro.org

arm64: dts: qcom: sdm845-shift-axolotl: enable pmi8998 charger

Enable the PMI8998/smb2 charger, and denote the secondary SMB1355
charger which is used for parallel charging.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524-pmi8998-charger-dts-v2-4-2a5c77d2ff0c@linaro.org

arm64: dts: qcom: sdm845-oneplus: enable pmi8998 charger

Enable the pmi8998 charger on both devices, enabling charging speeds
above the default 500mA limit the bootloader sets.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524-pmi8998-charger-dts-v2-3-2a5c77d2ff0c@linaro.org

arm64: dts: qcom: pmi8998: add charger node

Add a node for the smb2 charger hardware found on the pmi8998 pmic
following the DT bindings.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524-pmi8998-charger-dts-v2-2-2a5c77d2ff0c@linaro.org

arm64: dts: qcom: pmi8998: enable rradc by default

There is no need for the RRADC to be disabled by default,
lets just enable it by default and not clutter up DT.

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524-pmi8998-charger-dts-v2-1-2a5c77d2ff0c@linaro.org

arm64: dts: qcom: ipq9574: Enable crypto nodes

Enable crypto support for ipq9574.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526161129.1454-5-quic_anusha@quicinc.com

Merge branch '20230526161129.1454-2-quic_anusha@quicinc.com' into arm64-for-6.5

Merge IPQ9574 Crypto Engine-related DeviceTree bindings, to gain the
additional clock defines needed to add the related nodes.

dt-bindings: clock: Add crypto clock and reset definitions

Add crypto clock and reset ID definitions for ipq9574.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526161129.1454-2-quic_anusha@quicinc.com

arm64: dts: qcom: qdu1000: Add IMEM and PIL info region

Add a simple-mfd representing IMEM on QDU1000 and define the PIL
relocation info region, so that post mortem tools will be able
to locate the loaded remoteprocs.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230522151206.22654-3-quic_kbajaj@quicinc.com

arm64: dts: adapt to LP855X bindings changes

Change underscores in ROM node names to dashes, and remove deprecated
pwm-period property.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230519180728.2281-5-aweber.kernel@gmail.com

arm64: dts: qcom: ipq5332: add few more reserved memory region

In IPQ SoCs, bootloader will collect the system RAM contents upon crash for
the post morterm analysis. If we don't reserve the memory region used by
bootloader, obviously linux will consume it and upon next boot on crash,
bootloader will be loaded in the same region, which will lead to loose some
of the data, sometimes we may miss out critical information. So lets
reserve the region used by the bootloader.

Similarly SBL copies some data into the reserved region and it will be
used in the crash scenario. So reserve 1MB for SBL as well.

While at it, drop the size padding in the smem memory region.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230519133844.23512-4-quic_kathirav@quicinc.com

arm64: dts: qcom: ipq5332: define UART1

Add the definition for the UART1 found on IPQ5332 SoC.

Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230519133844.23512-3-quic_kathirav@quicinc.com

arm64: dts: qcom: ipq5332: rename mi01.2 dts to rdp441

To align with ipq5332-rdp468.dts, lets rename the mi01.2 dts as well to
ipq5332-rdp441.dts.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230519133844.23512-2-quic_kathirav@quicinc.com

arm64: dts: qcom: sm7225-fairphone-fp4: Add Bluetooth

The device has a WCN3988 chip for WiFi and Bluetooth. Configure the
Bluetooth node and enable the UART it is connected to, plus the
necessary pinctrl that has been borrowed with comments from
sc7280-idp.dtsi.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230421-fp4-bluetooth-v2-4-3de840d5483e@fairphone.com

arm64: dts: qcom: sm6350: add uart1 node

Add the node describing uart1 incl. opp table and pinctrl.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230421-fp4-bluetooth-v2-3-3de840d5483e@fairphone.com

arm64: dts: qcom: sm8550: Flush RSC sleep & wake votes

The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.

Without this, only AMC votes are being commited.

Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-8-b4a985f57b8b@linaro.org

arm64: dts: qcom: sm6350: Flush RSC sleep & wake votes

The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.

Without this, only AMC votes are being commited.

Fixes: 5f82b9cda61e ("arm64: dts: qcom: Add SM6350 device tree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-7-b4a985f57b8b@linaro.org

arm64: dts: qcom: sdm845: Flush RSC sleep & wake votes

The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.

Without this, only AMC votes are being commited.

Fixes: c83545d95376 ("arm64: dts: sdm845: Add rpmh-rsc node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-6-b4a985f57b8b@linaro.org

arm64: dts: qcom: sdm670: Flush RSC sleep & wake votes

The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.

Without this, only AMC votes are being commited.

Fixes: 07c8ded6e373 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-5-b4a985f57b8b@linaro.org

arm64: dts: qcom: sc8180x: Flush RSC sleep & wake votes

The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.

Without this, only AMC votes are being commited.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-4-b4a985f57b8b@linaro.org

arm64: dts: qcom: qdu1000: Flush RSC sleep & wake votes

The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.

Without this, only AMC votes are being commited.

Fixes: 6bd20c54b589 ("arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-3-b4a985f57b8b@linaro.org

arm64: dts: qcom: sm6350: Add PSCI idle states

Add the PSCI idle states so that the CPU (among other things) can
reach lower power states.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-2-b4a985f57b8b@linaro.org

arm64: dts: qcom: ipq9574: add few more reserved memory region

In IPQ SoCs, bootloader will collect the system RAM contents upon crash
for post-morterm analysis. If we don't reserve the memory region used
by bootloader, obviously linux will consume it and upon next boot on
crash, bootloader will be loaded in the same region, which will lead to
loss of some data, sometimes we may miss out critical information.
So lets reserve the region used by the bootloader.

Similarly SBL copies some data into the reserved region and it will be
used in the crash scenario. So reserve 1MB for SBL as well.

While at it, drop the size padding in the reserved memory region,
wherever applicable

Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230602084431.19134-1-quic_anusha@quicinc.com

arm64: dts: qcom: ipq5332: add support for the RDP474 variant

Add the initial device tree support for the Reference Design
Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries
the support for Console UART, eMMC, I2C and GPIO based buttons.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230605080531.3879-5-quic_kathirav@quicinc.com

dt-bindings: arm: qcom: document MI01.9 board based on IPQ5332 family

Document the MI01.9 (Reference Design Platform 474) board based on IPQ5332
family of SoCs.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230605080531.3879-4-quic_kathirav@quicinc.com

arm64: dts: qcom: sc8280xp: add resets for soundwire controllers

Soundwire controllers on sc8280xp needs an explicit reset, add
support for this.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-6-srinivas.kandagatla@linaro.org

Merge branch '20230608125315.11454-2-srinivas.kandagatla@linaro.org' into arm64-for-6.5

Merge the SC8280XP LPASSCC DeviceTree bindings in order to get access
to the newly added reset defines.

dt-bindings: clock: Add LPASS AUDIOCC and reset controller for SC8280XP

The LPASS (Low Power Audio Subsystem) Audio clock controller provides reset
support when it is under the control of Q6DSP.

Add support for those resets and adds IDs for clients to request the reset.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-3-srinivas.kandagatla@linaro.org

dt-bindings: clock: Add LPASSCC and reset controller for SC8280XP

The LPASS (Low Power Audio Subsystem) clock controller provides reset
support when it is under the control of Q6DSP.

Add support for those resets and adds IDs for clients to request the reset.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-2-srinivas.kandagatla@linaro.org

arm64: dts: qcom: sm8550-mtp: add sound card

Add the sound card node with tested playback over WSA8845 speakers and
WCD9385 headset over USB Type-C.  The recording links were not tested,
but should be similar to previous platforms.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612173758.286411-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8550-qrd: add sound card

Add the sound card node with tested playback over WSA8845 speakers and
WCD9385 headset over USB Type-C.  The recording links were not tested,
but should be similar to previous platforms.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612173758.286411-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8550-mtp: add WSA8845 speakers

Add Qualcomm WSA8845 Soundwire smart speaker amplifiers.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608094323.267278-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8550-qrd: add WSA8845 speakers

Add Qualcomm WSA8845 Soundwire smart speaker amplifiers.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608094323.267278-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: Add SDX75 platform and IDP board support

Add basic devicetree support for SDX75 platform and IDP board from
Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1686311438-24177-6-git-send-email-quic_rohiagar@quicinc.com

dt-bindings: arm: qcom: Document SDX75 platform and boards

Document the SDX75 platform binding and also the boards using it.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1686311438-24177-2-git-send-email-quic_rohiagar@quicinc.com

Merge branch '20230512122347.1219-3-quic_tdas@quicinc.com' into arm64-for-6.5

Merge the SDX75 GCC DeviceTree binding, in order to get access to the
clock defines in the DeviceTree source.

arm64: dts: qcom: sm8550-qrd: enable PMIC Volume and Power buttons

The Volume Down & Power buttons are controlled by the PMIC via
the PON hardware, and the Volume Up is connected to a PMIC gpio.

Enable the necessary hardware and setup the GPIO state for the
Volume Up gpio key.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-4-a288f24af81b@linaro.org

arm64: dts: qcom: pmk8550: always enable RTC PMIC device

There's no reason to keep the RTC disabled, it has been tested
and is functional on the SM8550 QRD and MTP boards.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-3-a288f24af81b@linaro.org

arm64: dts: qcom: sm8550-qrd: add notification RGB LED

The QRD features a notification LED connected to the pm8550.
Configure the RGB led controlled by the PMIC PWM controller.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-2-a288f24af81b@linaro.org

arm64: dts: qcom: pm8550: add PWM controller

Add the PWM function to the pm8550 dtsi, this is usually used
to drive RGB leds on platforms using this PMIC.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-1-a288f24af81b@linaro.org

arm64: dts: qcom: sc8180x: Move DisplayPort for MMCX

The DisplayPort blocks are powered by MMCX and should be described as
such to ensure that power votes are done on the right resource.

This also solves the problem that sync_state is unaware of the DP
controllers needing MMCX to be kept alive during boot. As such this
change also fixes occasionally seen crashes during boot due to
undervoltage of MMCX.

Fixes: 494dec9b6f54 ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220739.1886155-1-quic_bjorande@quicinc.com

arm64: dts: qcom: sc8180x: Fix adreno smmu compatible

The adreno smmu should be compatible with qcom,adreno-smmu as well for
per-process page tables to work.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220532.1884860-1-quic_bjorande@quicinc.com

arm64: dts: qcom: sc8180x-primus: dispcc is already okay

&dispcc status was changed to okay by default in the platform, no need
to do it again in the board.

Fixes: 2ce38cc1e8fe ("arm64: dts: qcom: sc8180x: Introduce Primus")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220420.1884631-1-quic_bjorande@quicinc.com

arm64: dts: qcom: sm8550: add display port nodes

Add the Display Port controller subnode to the MDSS node.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-dp-v4-2-ac2c6899d22c@linaro.org

arm64: dts: qcom: sm8550: fix low_svs RPMhPD labels

"low" was written "lov", fix this.

Fixes: 99d33ee61cb0 ("arm64: dts: qcom: sm8550: Add missing RPMhPD OPP levels")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-dp-v4-1-ac2c6899d22c@linaro.org

arm64: dts: qcom: sa8540p-ride: Specify ethernet phy OUI

With wider usage on more boards, there have been reports of the
following:

    [  315.016174] qcom-ethqos 20000.ethernet eth0: no phy at addr -1
    [  315.016179] qcom-ethqos 20000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -19)

which has been fairly random and isolated to specific boards.
Early reports were written off as a hardware issue, but it has been
prevalent enough on boards that theory seems unlikely.

In bring up of a newer piece of hardware, similar was seen, but this
time _consistently_. Moving the reset to the mdio bus level (which isn't
exactly a lie, it is the only device on the bus so one could model it as
such) fixed things on that platform. Analysis on sa8540p-ride shows that
the phy's reset is not being handled during the OUI scan if the reset
lives in the phy node:

    # gpio 752 is the reset, and is active low, first mdio reads are the OUI
    modprobe-420     [006] .....   154.738544: mdio_access: stmmac-0 read  phy:0x08 reg:0x02 val:0x0141
    modprobe-420     [007] .....   154.738665: mdio_access: stmmac-0 read  phy:0x08 reg:0x03 val:0x0dd4
    modprobe-420     [004] .....   154.741357: gpio_value: 752 set 1
    modprobe-420     [004] .....   154.741358: gpio_direction: 752 out (0)
    modprobe-420     [004] .....   154.741360: gpio_value: 752 set 0
    modprobe-420     [006] .....   154.762751: gpio_value: 752 set 1
    modprobe-420     [007] .....   154.846857: gpio_value: 752 set 1
    modprobe-420     [004] .....   154.937824: mdio_access: stmmac-0 write phy:0x08 reg:0x0d val:0x0003
    modprobe-420     [004] .....   154.937932: mdio_access: stmmac-0 write phy:0x08 reg:0x0e val:0x0014

Moving it to the bus level, or specifying the OUI in the phy's
compatible ensures the reset is handled before any mdio access
Here is tracing with the OUI approach (which skips scanning the OUI):

    modprobe-549     [007] .....    63.860295: gpio_value: 752 set 1
    modprobe-549     [007] .....    63.860297: gpio_direction: 752 out (0)
    modprobe-549     [007] .....    63.860299: gpio_value: 752 set 0
    modprobe-549     [004] .....    63.882599: gpio_value: 752 set 1
    modprobe-549     [005] .....    63.962132: gpio_value: 752 set 1
    modprobe-549     [006] .....    64.049379: mdio_access: stmmac-0 write phy:0x08 reg:0x0d val:0x0003
    modprobe-549     [006] .....    64.049490: mdio_access: stmmac-0 write phy:0x08 reg:0x0e val:0x0014

The OUI approach is taken given the description matches the situation
perfectly (taken from ethernet-phy.yaml):

    - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
      description:
        If the PHY reports an incorrect ID (or none at all) then the
        compatible list may contain an entry with the correct PHY ID
        in the above form.
        The first group of digits is the 16 bit Phy Identifier 1
        register, this is the chip vendor OUI bits 3:18. The
        second group of digits is the Phy Identifier 2 register,
        this is the chip vendor OUI bits 19:24, followed by 10
        bits of a vendor specific ID.

With this in place the sa8540p-ride's phy is probing consistently, so
it seems the floating reset during mdio access was the issue. In either
case, it shouldn't be floating so this improves the situation. The below
link discusses some of the relationship of mdio, its phys, and points to
this OUI compatible as a way to opt out of the OUI scan pre-reset
handling which influenced this decision.

Link: https://lore.kernel.org/all/dca54c57-a3bd-1147-63b2-4631194963f0@gmail.com/
Fixes: 57827e87be54 ("arm64: dts: qcom: sa8540p-ride: Add ethernet nodes")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608201513.882950-1-ahalaney@redhat.com

arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G

Introduce support for the Lenovo Flex 5G laptop, built on the Qualcomm
SC8180X platform. Supported peripherals includes keyboard, touchpad,
UFS storage, external USB and WiFi.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-16-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Introduce Primus

Introduce support for the SC8180X reference device, aka Primus, with
debug UART, regulators, UFS and USB support.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-15-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Add pmics

SC8180X based platforms have PM8150, PM8150C, PMC8180 and SMB2351 PMICs,
so add these as well

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-14-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Add display and gpu nodes

This patch adds gpu, gmu, gpucc, dispcc and finally the mdss node with
dsi0/1, dp0/1 and edp subnodes as found in this SoC

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-13-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes

This patch adds remoteprocs, wifi and usb and usb phy nodes
for this SoC

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-12-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Add PCIe instances

This patch adds PCIe instances found on this SoC

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-11-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Add QUPs

This patch adds qup instances and i2c, spi, serial ports

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-10-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Add thermal zones

This patch adds tsens nodes and thermal zones for sc8180x SoC

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-9-vkoul@kernel.org

arm64: dts: qcom: sc8180x: Add interconnects and lmh

This add interconnect nodes and add LMH to sc8180x SoC dtsi

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-8-vkoul@kernel.org

arm64: dts: qcom: Introduce the SC8180x platform

Introduce a base dtsi for the Qualcomm SC8180x platform, with CPUs,
global clock controller, SMMU, rpmh clocks, rpmh power-domains,
CPUfreq etc

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-7-vkoul@kernel.org

arm64: dts: qcom: msm8916: Move aliases to boards

MSM8939 has the aliases defined separately for each board (because
there could be (theoretically) a board where the slots are numbered
differently. To make MSM8916 and MSM8939 more consistent do the same
for all MSM8916 boards and move aliases there.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-6-bec0f5fb46fb@gerhold.net

arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec

All definitions in pm8916.dtsi use the &pm8916_ label prefix, only the
codec uses the &wcd_codec label. &wcd_codec is confusing because the
codec on MSM8916 is split into a "wcd-digital" and "wcd-analog" part
and both could be described with &wcd_codec.

Let's just name it &pm8916_codec so it's consistent with all other PMIC
device nodes.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-5-bec0f5fb46fb@gerhold.net

arm64: dts: qcom: msm8916/39: Clean up MDSS labels

Right now MDSS related definitions cannot be properly grouped together
in board DTs because the labels do not use consistent prefixes. The DSI
PHY label is particularly weird because the DSI number is at the end
(&dsi_phy0) while DSI itself is called &dsi0.

Follow the example of more recent SoCs and give all the MDSS related
nodes a consistent label that allows proper grouping.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-4-bec0f5fb46fb@gerhold.net

arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl

Make the labels for the BLSP I2C/SPI pinctrl consistent with the one
used for UART by adding the missing blsp_ prefix. This allows having
them properly grouped together.

The nodes are only reordered in msm8939.dtsi for now since the pinctrl
definitions in msm8916-pins.dtsi are currently still unordered anyway.
(I will try fixing this in a future patch.)

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-3-bec0f5fb46fb@gerhold.net

arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN

For some reason the BLSP UART controllers have a label with a number
behind blsp (&blsp1_uartN) while I2C/SPI are named without (&blsp_i2cN).
This is confusing, especially for proper node ordering in board DTs.

Right now all board DTs are ordered as if the number behind blsp does
not exist (&blsp_i2cN comes before &blsp1_uartN). Strictly speaking
correct ordering would be the other way around ('1' comes before '_').

End this confusion by giving the UART controllers consistent labels.
There is just one BLSP on MSM8916/39 so the number is redundant.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-2-bec0f5fb46fb@gerhold.net

arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm

MSM8916 is the only ARM64 Qualcomm SoC that is still using the old
&msmgpio name. Change this to &tlmm to avoid confusion.

Note that the node ordering does not change because the MSM8916 device
trees have pinctrl separated at the bottom (similar to sc7180).

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-1-bec0f5fb46fb@gerhold.net

arm64: dts: qcom: qrb4210-rb2: Enable USB node

Enable the USB controller and HS/SS PHYs on qrb4210-rb2 board.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516150511.2346357-5-bhupesh.sharma@linaro.org

arm64: dts: qcom: sm6115: Add USB SS qmp phy node

Add USB superspeed qmp phy node to dtsi.

Make sure that the various board dts files (which include sm4250.dtsi file)
continue to work as intended.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516150511.2346357-4-bhupesh.sharma@linaro.org

arm64: dts: qcom: ipq5332: add support for the RDP442 variant

Add the initial device tree support for the Reference Design
Platform(RDP) 442 based on IPQ5332 family of SoC. This patch carries
the support for Console UART, SPI NOR, eMMC and I2C.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509160133.3794-3-quic_kathirav@quicinc.com

dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family

Document the MI01.3 (Reference Design Platform 442) board based on IPQ5332
family of SoCs.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509160133.3794-2-quic_kathirav@quicinc.com

arm64: dts: qcom: sm8550: Add graphics clock controller

Add device node for graphics clock controller on Qualcomm
SM8550 platform.

Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524181800.28717-4-quic_jkona@quicinc.com

Merge branch 'sm8450-sm8550-gpucc-binding' into arm64-for-6.5

Introduce DeviceTree bindings for SM8450 and SM8550 GPU clock
controller, to introduce the constants necessary to referr to these
clocks.

dt-bindings: clock: qcom: Add SM8550 graphics clock controller

Add device tree bindings for the graphics clock controller on
Qualcomm SM8550 platform.

Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524181800.28717-2-quic_jkona@quicinc.com

dt-bindings: clock: Add Qcom SM8450 GPUCC

Add device tree bindings for the graphics clock controller on Qualcomm
Technology Inc's SM8450 SoCs.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517-topic-waipio-gpucc-v1-1-4f40e282af1d@linaro.org

arm64: dts: qcom: sa8775p-ride: enable i2c11

This enables the i2c11 node on sa8775p-ride board for A2B controller
and audio port expander.

Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526133122.16443-6-quic_shazhuss@quicinc.com

arm64: dts: qcom: sa8775p: add uart5 and uart9 nodes

Add remaining uart5 and uart9 nodes for UART bus present on sa8775p
SoC.

Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526133122.16443-5-quic_shazhuss@quicinc.com

arm64: dts: qcom: sa8775p: add missing spi nodes

Add the missing nodes of the SPI buses present on sa8775p platform.

Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526133122.16443-4-quic_shazhuss@quicinc.com

arm64: dts: qcom: sa8775p: add missing i2c nodes

Add the missing nodes for the i2c buses present on sa8775p Soc.

Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526133122.16443-3-quic_shazhuss@quicinc.com

arm64: dts: qcom: sa8775p: add the QUPv3 #0 and #3 node

Add zeroth and third instance of the QUPv3 engine to the sa8775p.dtsi.

Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526133122.16443-2-quic_shazhuss@quicinc.com

arm64: dts: qcom: apq8096: fix fixed regulator name property

Correct the typo in 'regulator-name' property.

  apq8096-ifc6640.dtb: v1p05-regulator: 'regulator-name' is a required property
  apq8096-ifc6640.dtb: v1p05-regulator: Unevaluated properties are not allowed ('reglator-name' was unexpected)

Fixes: 6cbdec2d3ca6 ("arm64: dts: qcom: msm8996: Introduce IFC6640")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230507174516.264936-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8996: correct MMCC clocks order

Re-order the clocks for MMCC clock controller node to match the bindings (Linux
driver takes by name):

  msm8996-mtp.dtb: clock-controller@8c0000: clock-names:1: 'gpll0' was expected
  msm8996-mtp.dtb: clock-controller@8c0000: clock-names:2: 'gcc_mmss_noc_cfg_ahb_clk' was expected

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230507174516.264936-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8916: correct LPASS CPU clocks order

Re-order the clocks for LPASS CPU node to match the bindings (Linux
driver takes by name):

  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:1: 'mi2s-bit-clk0' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:2: 'mi2s-bit-clk1' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:3: 'mi2s-bit-clk2' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:4: 'mi2s-bit-clk3' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:5: 'pcnoc-mport-clk' was expected
  msm8916-asus-z00l.dtb: audio-controller@7708000: clock-names:6: 'pcnoc-sway-clk' was expected

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230507174516.264936-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm845: Add stream-id of qspi to iommus

As part of DMA mode support to qspi driver.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1682328761-17517-5-git-send-email-quic_vnivarth@quicinc.com

arm64: dts: qcom: sc7280: Add stream-id of qspi to iommus

As part of DMA mode support to qspi driver.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1682328761-17517-4-git-send-email-quic_vnivarth@quicinc.com

arm64: dts: qcom: sc7180: Add stream-id of qspi to iommus

As part of DMA mode support to qspi driver.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1682328761-17517-3-git-send-email-quic_vnivarth@quicinc.com

arm64: dts: qcom: msm8996: correct /soc/bus ranges

The bus@0 node should have reg or ranges to fix dtbs W=1 warnings:

  Warning (unit_address_vs_reg): /soc@0/bus@0: node has a unit name, but no reg or ranges property
  Warning (simple_bus_reg): /soc@0/bus@0: missing or empty reg/ranges property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # MSM8996 Kagura
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420180746.860934-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm630-nile: correct duplicated reserved memory node

SoC DTSI already comes with 85800000 reserved memory node, so assume the
author wanted to update its length.  This fixes dtbs W=1 warning:

  Warning (unique_unit_address_if_enabled): /reserved-memory/qhee-code@85800000: duplicate unit-address (also used in node /reserved-memory/reserved@85800000)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211921.79871-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm6125-sprout: align ADC channel node names with bindings

Bindings expect ADC channel node names to follow specific pattern:

  sm6125-xiaomi-laurel-sprout.dtb: adc@3100: 'adc-chan@4d', 'adc-chan@4e', 'adc-chan@52', 'adc-chan@54' do not match any of the regexes: ...

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416123730.300863-6-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8550-qrd: add missing PCIE1 PHY AUX clock frequency

The SM8550 DTSI defines a fixed PCIE1 PHY AUX clock and expects boards
to define frequency.  Use the same as in MTP8550 to fix:

  sm8550-qrd.dtb: pcie-1-phy-aux-clk: 'clock-frequency' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416123730.300863-5-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8250: add missing qcom,smmu-500 fallback

Since commit 6c84bbd103d8 ("dt-bindings: arm-smmu: Add generic
qcom,smmu-500 bindings") the SMMU is supposed to use qcom,smmu-500
compatible fallback:

  ['qcom,sm8250-smmu-500', 'qcom,adreno-smmu', 'qcom,smmu-500', 'arm,mmu-500'] is too long
  'qcom,sm8250-smmu-500' is not one of ['qcom,msm8996-smmu-v2', 'qcom,msm8998-smmu-v2', 'qcom,sdm630-smmu-v2']
  'qcom,sm8250-smmu-500' is not one of ['qcom,msm8996-smmu-v2', 'qcom,sc7180-smmu-v2', 'qcom,sdm630-smmu-v2', 'qcom,sdm845-smmu-v2'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416123730.300863-4-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: qdu1000: add missing qcom,smmu-500 fallback

Since commit 6c84bbd103d8 ("dt-bindings: arm-smmu: Add generic
qcom,smmu-500 bindings") the SMMU is supposed to use qcom,smmu-500
compatible fallback:

  ['qcom,qdu1000-smmu-500', 'arm,mmu-500'] is too short
  ['qcom,qdu1000-smmu-500', 'arm,mmu-500'] is too long

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416123730.300863-3-krzysztof.kozlowski@linaro.org