platform/kernel/linux-rpi.git
5 years agoblock, bfq: increase idling for weight-raised queues
Paolo Valente [Tue, 12 Mar 2019 08:59:27 +0000 (09:59 +0100)]
block, bfq: increase idling for weight-raised queues

[ Upstream commit 778c02a236a8728bb992de10ed1f12c0be5b7b0e ]

If a sync bfq_queue has a higher weight than some other queue, and
remains temporarily empty while in service, then, to preserve the
bandwidth share of the queue, it is necessary to plug I/O dispatching
until a new request arrives for the queue. In addition, a timeout
needs to be set, to avoid waiting for ever if the process associated
with the queue has actually finished its I/O.

Even with the above timeout, the device is however not fed with new
I/O for a while, if the process has finished its I/O. If this happens
often, then throughput drops and latencies grow. For this reason, the
timeout is kept rather low: 8 ms is the current default.

Unfortunately, such a low value may cause, on the opposite end, a
violation of bandwidth guarantees for a process that happens to issue
new I/O too late. The higher the system load, the higher the
probability that this happens to some process. This is a problem in
scenarios where service guarantees matter more than throughput. One
important case are weight-raised queues, which need to be granted a
very high fraction of the bandwidth.

To address this issue, this commit lower-bounds the plugging timeout
for weight-raised queues to 20 ms. This simple change provides
relevant benefits. For example, on a PLEXTOR PX-256M5S, with which
gnome-terminal starts in 0.6 seconds if there is no other I/O in
progress, the same applications starts in
- 0.8 seconds, instead of 1.2 seconds, if ten files are being read
  sequentially in parallel
- 1 second, instead of 2 seconds, if, in parallel, five files are
  being read sequentially, and five more files are being written
  sequentially

Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agovideo: imsttfb: fix potential NULL pointer dereferences
Kangjie Lu [Mon, 1 Apr 2019 15:46:58 +0000 (17:46 +0200)]
video: imsttfb: fix potential NULL pointer dereferences

[ Upstream commit 1d84353d205a953e2381044953b7fa31c8c9702d ]

In case ioremap fails, the fix releases resources and returns
-ENOMEM to avoid NULL pointer dereferences.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Cc: Aditya Pakki <pakki001@umn.edu>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Rob Herring <robh@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agovideo: hgafb: fix potential NULL pointer dereference
Kangjie Lu [Mon, 1 Apr 2019 15:46:58 +0000 (17:46 +0200)]
video: hgafb: fix potential NULL pointer dereference

[ Upstream commit ec7f6aad57ad29e4e66cc2e18e1e1599ddb02542 ]

When ioremap fails, hga_vram should not be dereferenced. The fix
check the failure to avoid NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Cc: Aditya Pakki <pakki001@umn.edu>
Cc: Ferenc Bakonyi <fero@drama.obuda.kando.hu>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoscsi: qla2xxx: Reset the FCF_ASYNC_{SENT|ACTIVE} flags
Giridhar Malavali [Tue, 2 Apr 2019 21:24:22 +0000 (14:24 -0700)]
scsi: qla2xxx: Reset the FCF_ASYNC_{SENT|ACTIVE} flags

[ Upstream commit 0257eda08e806b82ee1fc90ef73583b6f022845c ]

Driver maintains state machine for processing and completing switch
commands. This patch resets FCF_ASYNC_{SENT|ACTIVE} flag to indicate if the
previous command is active or sent, in order for next GPSC command to
advance the state machine.

[mkp: commit desc typo]

Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoPCI: rcar: Fix 64bit MSI message address handling
Marek Vasut [Mon, 25 Mar 2019 11:41:01 +0000 (12:41 +0100)]
PCI: rcar: Fix 64bit MSI message address handling

[ Upstream commit 954b4b752a4c4e963b017ed8cef4c453c5ed308d ]

The MSI message address in the RC address space can be 64 bit. The
R-Car PCIe RC supports such a 64bit MSI message address as well.
The code currently uses virt_to_phys(__get_free_pages()) to obtain
a reserved page for the MSI message address, and the return value
of which can be a 64 bit physical address on 64 bit system.

However, the driver only programs PCIEMSIALR register with the bottom
32 bits of the virt_to_phys(__get_free_pages()) return value and does
not program the top 32 bits into PCIEMSIAUR, but rather programs the
PCIEMSIAUR register with 0x0. This worked fine on older 32 bit R-Car
SoCs, however may fail on new 64 bit R-Car SoCs.

Since from a PCIe controller perspective, an inbound MSI is a memory
write to a special address (in case of this controller, defined by
the value in PCIEMSIAUR:PCIEMSIALR), which triggers an interrupt, but
never hits the DRAM _and_ because allocation of an MSI by a PCIe card
driver obtains the MSI message address by reading PCIEMSIAUR:PCIEMSIALR
in rcar_msi_setup_irqs(), incorrectly programmed PCIEMSIAUR cannot
cause memory corruption or other issues.

There is however the possibility that if virt_to_phys(__get_free_pages())
returned address above the 32bit boundary _and_ PCIEMSIAUR was programmed
to 0x0 _and_ if the system had physical RAM at the address matching the
value of PCIEMSIALR, a PCIe card driver could allocate a buffer with a
physical address matching the value of PCIEMSIALR and a remote write to
such a buffer by a PCIe card would trigger a spurious MSI.

Fixes: e015f88c368d ("PCI: rcar: Add support for R-Car H3 to pcie-rcar")
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoPCI: rcar: Fix a potential NULL pointer dereference
Kangjie Lu [Fri, 15 Mar 2019 07:29:43 +0000 (02:29 -0500)]
PCI: rcar: Fix a potential NULL pointer dereference

[ Upstream commit f0d14edd2ba43b995bef4dd5da5ffe0ae19321a1 ]

In case __get_free_pages() fails and returns NULL, fix the return
value to -ENOMEM and release resources to avoid dereferencing a
NULL pointer.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonet: hns3: return 0 and print warning when hit duplicate MAC
Peng Li [Thu, 4 Apr 2019 08:17:51 +0000 (16:17 +0800)]
net: hns3: return 0 and print warning when hit duplicate MAC

[ Upstream commit 72110b567479f0282489a9b3747e76d8c67d75f5 ]

When set 2 same MAC to different function of one port, IMP
will return error as the later one may modify the origin one.
This will cause bond fail for 2 VFs of one port.

Driver just print warning and return 0 with this patch, so
if set same MAC address, it will return 0 but do not really
configure HW.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agopower: supply: max14656: fix potential use-before-alloc
Sven Van Asbroeck [Fri, 15 Feb 2019 21:43:02 +0000 (16:43 -0500)]
power: supply: max14656: fix potential use-before-alloc

[ Upstream commit 0cd0e49711556d2331a06b1117b68dd786cb54d2 ]

Call order on probe():
- max14656_hw_init() enables interrupts on the chip
- devm_request_irq() starts processing interrupts, isr
  could be called immediately
-    isr: schedules delayed work (irq_work)
-    irq_work: calls power_supply_changed()
- devm_power_supply_register() registers the power supply

Depending on timing, it's possible that power_supply_changed()
is called on an unregistered power supply structure.

Fix by registering the power supply before requesting the irq.

Cc: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoplatform/x86: intel_pmc_ipc: adding error handling
Junxiao Chang [Mon, 8 Apr 2019 09:40:22 +0000 (17:40 +0800)]
platform/x86: intel_pmc_ipc: adding error handling

[ Upstream commit e61985d0550df8c2078310202aaad9b41049c36c ]

If punit or telemetry device initialization fails, pmc driver should
unregister and return failure.

This change is to fix a kernel panic when removing kernel module
intel_pmc_ipc.

Fixes: 48c1917088ba ("platform:x86: Add Intel telemetry platform device")
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoARM: OMAP2+: pm33xx-core: Do not Turn OFF CEFUSE as PPA may be using it
Kabir Sahane [Tue, 9 Apr 2019 15:05:17 +0000 (08:05 -0700)]
ARM: OMAP2+: pm33xx-core: Do not Turn OFF CEFUSE as PPA may be using it

[ Upstream commit 72aff4ecf1cb85a3c6e6b42ccbda0bc631b090b3 ]

This area is used to store keys by HSPPA in case of AM438x SOC. Leave it
active.

Signed-off-by: Kabir Sahane <x0153567@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agodrm/amd/display: Use plane->color_space for dpp if specified
Nicholas Kazlauskas [Thu, 14 Mar 2019 17:46:44 +0000 (13:46 -0400)]
drm/amd/display: Use plane->color_space for dpp if specified

[ Upstream commit a1e07ba89d49581471d64c48152dbe03b42bd025 ]

[Why]
The input color space for the plane was previously ignored even if it
was set.

If a limited range YUV format was given to DC then the
wrong color transformation matrix was being used since DC assumed that
it was full range instead.

[How]
Respect the given color_space format for the plane if it isn't
COLOR_SPACE_UNKNOWN. Otherwise, use the implicit default since DM
didn't specify.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoPCI: rpadlpar: Fix leaked device_node references in add/remove paths
Tyrel Datwyler [Fri, 22 Mar 2019 18:27:21 +0000 (13:27 -0500)]
PCI: rpadlpar: Fix leaked device_node references in add/remove paths

[ Upstream commit fb26228bfc4ce3951544848555c0278e2832e618 ]

The find_dlpar_node() helper returns a device node with its reference
incremented.  Both the add and remove paths use this helper for find the
appropriate node, but fail to release the reference when done.

Annotate the find_dlpar_node() helper with a comment about the incremented
reference count and call of_node_put() on the obtained device_node in the
add and remove paths.  Also, fixup a reference leak in the find_vio_slot()
helper where we fail to call of_node_put() on the vdevice node after we
iterate over its children.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoARM: dts: imx6qdl: Specify IMX6QDL_CLK_IPG as "ipg" clock to SDMA
Andrey Smirnov [Fri, 29 Mar 2019 06:49:16 +0000 (23:49 -0700)]
ARM: dts: imx6qdl: Specify IMX6QDL_CLK_IPG as "ipg" clock to SDMA

[ Upstream commit b14c872eebc501b9640b04f4a152df51d6eaf2fc ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6QDL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality(this at least
breaks RAVE SP serdev driver on RDU2). Fix the code to specify
IMX6QDL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect
clock ratio.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ipg" clock to SDMA
Andrey Smirnov [Fri, 29 Mar 2019 06:49:17 +0000 (23:49 -0700)]
ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ipg" clock to SDMA

[ Upstream commit 8979117765c19edc3b01cc0ef853537bf93eea4b ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SX_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6SX_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoARM: dts: imx6ul: Specify IMX6UL_CLK_IPG as "ipg" clock to SDMA
Andrey Smirnov [Fri, 29 Mar 2019 06:49:19 +0000 (23:49 -0700)]
ARM: dts: imx6ul: Specify IMX6UL_CLK_IPG as "ipg" clock to SDMA

[ Upstream commit 7b3132ecefdd1fcdf6b86e62021d0e55ea8034db ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6UL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6UL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoARM: dts: imx7d: Specify IMX7D_CLK_IPG as "ipg" clock to SDMA
Andrey Smirnov [Fri, 29 Mar 2019 06:49:18 +0000 (23:49 -0700)]
ARM: dts: imx7d: Specify IMX7D_CLK_IPG as "ipg" clock to SDMA

[ Upstream commit 412b032a1dc72fc9d1c258800355efa6671b6315 ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX7D_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX7D_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoARM: dts: imx6sll: Specify IMX6SLL_CLK_IPG as "ipg" clock to SDMA
Andrey Smirnov [Fri, 29 Mar 2019 06:49:20 +0000 (23:49 -0700)]
ARM: dts: imx6sll: Specify IMX6SLL_CLK_IPG as "ipg" clock to SDMA

[ Upstream commit c5ed5daa65d5f665e666b76c3dbfa503066defde ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SLL_CLK_SDMA result in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6SLL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ahb" clock to SDMA
Andrey Smirnov [Fri, 29 Mar 2019 06:49:21 +0000 (23:49 -0700)]
ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ahb" clock to SDMA

[ Upstream commit cc839d0f8c284fcb7591780b568f13415bbb737c ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6SL_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
incorrect clock ratio.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoARM: dts: imx53: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
Andrey Smirnov [Fri, 29 Mar 2019 06:49:22 +0000 (23:49 -0700)]
ARM: dts: imx53: Specify IMX5_CLK_IPG as "ahb" clock to SDMA

[ Upstream commit 28c168018e0902c67eb9c60d0fc4c8aa166c4efe ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX5_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX5_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
incorrect clock ratio.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoARM: dts: imx50: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
Andrey Smirnov [Fri, 29 Mar 2019 06:49:24 +0000 (23:49 -0700)]
ARM: dts: imx50: Specify IMX5_CLK_IPG as "ahb" clock to SDMA

[ Upstream commit b7b4fda2636296471e29b78c2aa9535d7bedb7a0 ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX5_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX5_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
incorrect clock ratio.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoARM: dts: imx51: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
Andrey Smirnov [Fri, 29 Mar 2019 06:49:23 +0000 (23:49 -0700)]
ARM: dts: imx51: Specify IMX5_CLK_IPG as "ahb" clock to SDMA

[ Upstream commit 918bbde8085ae147a43dcb491953e0dd8f3e9d6a ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX5_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX5_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
incorrect clock ratio.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agosoc: rockchip: Set the proper PWM for rk3288
Douglas Anderson [Tue, 9 Apr 2019 20:49:05 +0000 (13:49 -0700)]
soc: rockchip: Set the proper PWM for rk3288

[ Upstream commit bbdc00a7de24cc90315b1775fb74841373fe12f7 ]

The rk3288 SoC has two PWM implementations available, the "old"
implementation and the "new" one.  You can switch between the two of
them by flipping a bit in the grf.

The "old" implementation is the default at chip power up but isn't the
one that's officially supposed to be used.  ...and, in fact, the
driver that gets selected in Linux using the rk3288 device tree only
supports the "new" implementation.

Long ago I tried to get a switch to the right IP block landed in the
PWM driver (search for "rk3288: Switch to use the proper PWM IP") but
that got rejected.  In the mean time the grf has grown a full-fledged
driver that already sets other random bits like this.  That means we
can now get the fix landed.

For those wondering how things could have possibly worked for the last
4.5 years, folks have mostly been relying on the bootloader to set
this bit.  ...but occasionally folks have pointed back to my old patch
series [1] in downstream kernels.

[1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1391597.html

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoclk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288
Douglas Anderson [Thu, 11 Apr 2019 23:21:53 +0000 (16:21 -0700)]
clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288

[ Upstream commit 57a20248ef3e429dc822f0774bc4e00136c46c83 ]

Experimentally it can be seen that going into deep sleep (specifically
setting PMU_CLR_DMA and PMU_CLR_BUS in RK3288_PMU_PWRMODE_CON1)
appears to fail unless "aclk_dmac1" is on.  The failure is that the
system never signals that it made it into suspend on the GLOBAL_PWROFF
pin and it just hangs.

NOTE that it's confirmed that it's the actual suspend that fails, not
one of the earlier calls to read/write registers.  Specifically if you
comment out the "PMU_GLOBAL_INT_DISABLE" setting in
rk3288_slp_mode_set() and then comment out the "cpu_do_idle()" call in
rockchip_lpmode_enter() then you can exercise the whole suspend path
without any crashing.

This is currently not a problem with suspend upstream because there is
no current way to exercise the deep suspend code.  However, anyone
trying to make it work will run into this issue.

This was not a problem on shipping rk3288-based Chromebooks because
those devices all ran on an old kernel based on 3.14.  On that kernel
"aclk_dmac1" appears to be left on all the time.

There are several ways to skin this problem.

A) We could add "aclk_dmac1" to the list of critical clocks and that
apperas to work, but presumably that wastes power.

B) We could keep a list of "struct clk" objects to enable at suspend
time in clk-rk3288.c and use the standard clock APIs.

C) We could make the rk3288-pmu driver keep a list of clocks to enable
at suspend time.  Presumably this would require a dts and bindings
change.

D) We could just whack the clock on in the existing syscore suspend
function where we whack a bunch of other clocks.  This is particularly
easy because we know for sure that the clock's only parent
("aclk_cpu") is a critical clock so we don't need to do anything more
than ungate it.

In this case I have chosen D) because it seemed like the least work,
but any of the other options would presumably also work fine.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agosoc: mediatek: pwrap: Zero initialize rdata in pwrap_init_cipher
Nathan Chancellor [Thu, 7 Mar 2019 22:56:51 +0000 (15:56 -0700)]
soc: mediatek: pwrap: Zero initialize rdata in pwrap_init_cipher

[ Upstream commit 89e28da82836530f1ac7a3a32fecc31f22d79b3e ]

When building with -Wsometimes-uninitialized, Clang warns:

drivers/soc/mediatek/mtk-pmic-wrap.c:1358:6: error: variable 'rdata' is
used uninitialized whenever '||' condition is true
[-Werror,-Wsometimes-uninitialized]

If pwrap_write returns non-zero, pwrap_read will not be called to
initialize rdata, meaning that we will use some random uninitialized
stack value in our print statement. Zero initialize rdata in case this
happens.

Link: https://github.com/ClangBuiltLinux/linux/issues/401
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoPCI: keystone: Prevent ARM32 specific code to be compiled for ARM64
Kishon Vijay Abraham I [Mon, 25 Mar 2019 09:39:33 +0000 (15:09 +0530)]
PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64

[ Upstream commit f316a2b53cd7f37963ae20ec7072eb27a349a4ce ]

hook_fault_code() is an ARM32 specific API for hooking into data abort.

AM65X platforms (that integrate ARM v8 cores and select CONFIG_ARM64 as
arch) rely on pci-keystone.c but on them the enumeration of a
non-present BDF does not trigger a bus error, so the fixup exception
provided by calling hook_fault_code() is not needed and can be guarded
with CONFIG_ARM.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoplatform/chrome: cros_ec_proto: check for NULL transfer function
Enrico Granata [Wed, 3 Apr 2019 22:40:36 +0000 (15:40 -0700)]
platform/chrome: cros_ec_proto: check for NULL transfer function

[ Upstream commit 94d4e7af14a1170e34cf082d92e4c02de9e9fb88 ]

As new transfer mechanisms are added to the EC codebase, they may
not support v2 of the EC protocol.

If the v3 initial handshake transfer fails, the kernel will try
and call cmd_xfer as a fallback. If v2 is not supported, cmd_xfer
will be NULL, and the code will end up causing a kernel panic.

Add a check for NULL before calling the transfer function, along
with a helpful comment explaining how one might end up in this
situation.

Signed-off-by: Enrico Granata <egranata@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoi40e: Queues are reserved despite "Invalid argument" error
Adam Ludkiewicz [Wed, 6 Feb 2019 23:08:15 +0000 (15:08 -0800)]
i40e: Queues are reserved despite "Invalid argument" error

[ Upstream commit 3e957b377bf4262aec2dd424f28ece94e36814d4 ]

Added a new local variable in the i40e_setup_tc function named
old_queue_pairs so num_queue_pairs can be restored to the correct
value in case configuring queue channels fails. Additionally, moved
the exit label in the i40e_setup_tc function so the if (need_reset)
block can be executed.
Also, fixed data packing in the i40e_setup_tc function.

Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agox86/PCI: Fix PCI IRQ routing table memory leak
Wenwen Wang [Wed, 17 Apr 2019 14:18:50 +0000 (09:18 -0500)]
x86/PCI: Fix PCI IRQ routing table memory leak

[ Upstream commit ea094d53580f40c2124cef3d072b73b2425e7bfd ]

In pcibios_irq_init(), the PCI IRQ routing table 'pirq_table' is first
found through pirq_find_routing_table().  If the table is not found and
CONFIG_PCI_BIOS is defined, the table is then allocated in
pcibios_get_irq_routing_table() using kmalloc().  Later, if the I/O APIC is
used, this table is actually not used.  In that case, the allocated table
is not freed, which is a memory leak.

Free the allocated table if it is not used.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
[bhelgaas: added Ingo's reviewed-by, since the only change since v1 was to
use the irq_routing_table local variable name he suggested]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonet: thunderbolt: Unregister ThunderboltIP protocol handler when suspending
Mika Westerberg [Fri, 28 Sep 2018 09:21:17 +0000 (12:21 +0300)]
net: thunderbolt: Unregister ThunderboltIP protocol handler when suspending

[ Upstream commit 9872760eb7b1d4f6066ad8b560714a5d0a728fdb ]

The XDomain protocol messages may start as soon as Thunderbolt control
channel is started. This means that if the other host starts sending
ThunderboltIP packets early enough they will be passed to the network
driver which then gets confused because its resume hook is not called
yet.

Fix this by unregistering the ThunderboltIP protocol handler when
suspending and registering it back on resume.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoswitchtec: Fix unintended mask of MRPC event
Wesley Sheng [Mon, 15 Apr 2019 14:41:42 +0000 (22:41 +0800)]
switchtec: Fix unintended mask of MRPC event

[ Upstream commit 083c1b5e50b701899dc32445efa8b153685260d5 ]

When running application tool switchtec-user's `firmware update` and `event
wait` commands concurrently, sometimes the firmware update speed reduced
significantly.

It is because when the MRPC event happened after MRPC event occurrence
check but before the event mask loop reaches its header register in event
ISR, the MRPC event would be masked unintentionally.  Since there's no
chance to enable it again except for a module reload, all the following
MRPC execution completion checks time out.

Fix this bug by skipping the mask operation for MRPC event in event ISR,
same as what we already do for LINK event.

Fixes: 52eabba5bcdb ("switchtec: Add IOCTLs to the Switchtec driver")
Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoiommu/arm-smmu-v3: Don't disable SMMU in kdump kernel
Will Deacon [Tue, 23 Apr 2019 10:59:36 +0000 (11:59 +0100)]
iommu/arm-smmu-v3: Don't disable SMMU in kdump kernel

[ Upstream commit 3f54c447df34ff9efac7809a4a80fd3208efc619 ]

Disabling the SMMU when probing from within a kdump kernel so that all
incoming transactions are terminated can prevent the core of the crashed
kernel from being transferred off the machine if all I/O devices are
behind the SMMU.

Instead, continue to probe the SMMU after it is disabled so that we can
reinitialise it entirely and re-attach the DMA masters as they are reset.
Since the kdump kernel may not have drivers for all of the active DMA
masters, we suppress fault reporting to avoid spamming the console and
swamping the IRQ threads.

Reported-by: "Leizhen (ThunderTown)" <thunder.leizhen@huawei.com>
Tested-by: "Leizhen (ThunderTown)" <thunder.leizhen@huawei.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agovfio: Fix WARNING "do not call blocking ops when !TASK_RUNNING"
Farhan Ali [Wed, 3 Apr 2019 18:22:27 +0000 (14:22 -0400)]
vfio: Fix WARNING "do not call blocking ops when !TASK_RUNNING"

[ Upstream commit 41be3e2618174fdf3361e49e64f2bf530f40c6b0 ]

vfio_dev_present() which is the condition to
wait_event_interruptible_timeout(), will call vfio_group_get_device
and try to acquire the mutex group->device_lock.

wait_event_interruptible_timeout() will set the state of the current
task to TASK_INTERRUPTIBLE, before doing the condition check. This
means that we will try to acquire the mutex while already in a
sleeping state. The scheduler warns us by giving the following
warning:

[ 4050.264464] ------------[ cut here ]------------
[ 4050.264508] do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000b33c00e2>] prepare_to_wait_event+0x14a/0x188
[ 4050.264529] WARNING: CPU: 12 PID: 35924 at kernel/sched/core.c:6112 __might_sleep+0x76/0x90
....

 4050.264756] Call Trace:
[ 4050.264765] ([<000000000017bbaa>] __might_sleep+0x72/0x90)
[ 4050.264774]  [<0000000000b97edc>] __mutex_lock+0x44/0x8c0
[ 4050.264782]  [<0000000000b9878a>] mutex_lock_nested+0x32/0x40
[ 4050.264793]  [<000003ff800d7abe>] vfio_group_get_device+0x36/0xa8 [vfio]
[ 4050.264803]  [<000003ff800d87c0>] vfio_del_group_dev+0x238/0x378 [vfio]
[ 4050.264813]  [<000003ff8015f67c>] mdev_remove+0x3c/0x68 [mdev]
[ 4050.264825]  [<00000000008e01b0>] device_release_driver_internal+0x168/0x268
[ 4050.264834]  [<00000000008de692>] bus_remove_device+0x162/0x190
[ 4050.264843]  [<00000000008daf42>] device_del+0x1e2/0x368
[ 4050.264851]  [<00000000008db12c>] device_unregister+0x64/0x88
[ 4050.264862]  [<000003ff8015ed84>] mdev_device_remove+0xec/0x130 [mdev]
[ 4050.264872]  [<000003ff8015f074>] remove_store+0x6c/0xa8 [mdev]
[ 4050.264881]  [<000000000046f494>] kernfs_fop_write+0x14c/0x1f8
[ 4050.264890]  [<00000000003c1530>] __vfs_write+0x38/0x1a8
[ 4050.264899]  [<00000000003c187c>] vfs_write+0xb4/0x198
[ 4050.264908]  [<00000000003c1af2>] ksys_write+0x5a/0xb0
[ 4050.264916]  [<0000000000b9e270>] system_call+0xdc/0x2d8
[ 4050.264925] 4 locks held by sh/35924:
[ 4050.264933]  #0: 000000001ef90325 (sb_writers#4){.+.+}, at: vfs_write+0x9e/0x198
[ 4050.264948]  #1: 000000005c1ab0b3 (&of->mutex){+.+.}, at: kernfs_fop_write+0x1cc/0x1f8
[ 4050.264963]  #2: 0000000034831ab8 (kn->count#297){++++}, at: kernfs_remove_self+0x12e/0x150
[ 4050.264979]  #3: 00000000e152484f (&dev->mutex){....}, at: device_release_driver_internal+0x5c/0x268
[ 4050.264993] Last Breaking-Event-Address:
[ 4050.265002]  [<000000000017bbaa>] __might_sleep+0x72/0x90
[ 4050.265010] irq event stamp: 7039
[ 4050.265020] hardirqs last  enabled at (7047): [<00000000001cee7a>] console_unlock+0x6d2/0x740
[ 4050.265029] hardirqs last disabled at (7054): [<00000000001ce87e>] console_unlock+0xd6/0x740
[ 4050.265040] softirqs last  enabled at (6416): [<0000000000b8fe26>] __udelay+0xb6/0x100
[ 4050.265049] softirqs last disabled at (6415): [<0000000000b8fe06>] __udelay+0x96/0x100
[ 4050.265057] ---[ end trace d04a07d39d99a9f9 ]---

Let's fix this as described in the article
https://lwn.net/Articles/628628/.

Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
[remove now redundant vfio_dev_present()]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonfsd: avoid uninitialized variable warning
Arnd Bergmann [Fri, 22 Mar 2019 14:07:11 +0000 (15:07 +0100)]
nfsd: avoid uninitialized variable warning

[ Upstream commit 0ab88ca4bcf18ba21058d8f19220f60afe0d34d8 ]

clang warns that 'contextlen' may be accessed without an initialization:

fs/nfsd/nfs4xdr.c:2911:9: error: variable 'contextlen' is uninitialized when used here [-Werror,-Wuninitialized]
                                                                contextlen);
                                                                ^~~~~~~~~~
fs/nfsd/nfs4xdr.c:2424:16: note: initialize the variable 'contextlen' to silence this warning
        int contextlen;
                      ^
                       = 0

Presumably this cannot happen, as FATTR4_WORD2_SECURITY_LABEL is
set if CONFIG_NFSD_V4_SECURITY_LABEL is enabled.
Adding another #ifdef like the other two in this function
avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonfsd: allow fh_want_write to be called twice
J. Bruce Fields [Fri, 12 Apr 2019 20:37:30 +0000 (16:37 -0400)]
nfsd: allow fh_want_write to be called twice

[ Upstream commit 0b8f62625dc309651d0efcb6a6247c933acd8b45 ]

A fuzzer recently triggered lockdep warnings about potential sb_writers
deadlocks caused by fh_want_write().

Looks like we aren't careful to pair each fh_want_write() with an
fh_drop_write().

It's not normally a problem since fh_put() will call fh_drop_write() for
us.  And was OK for NFSv3 where we'd do one operation that might call
fh_want_write(), and then put the filehandle.

But an NFSv4 protocol fuzzer can do weird things like call unlink twice
in a compound, and then we get into trouble.

I'm a little worried about this approach of just leaving everything to
fh_put().  But I think there are probably a lot of
fh_want_write()/fh_drop_write() imbalances so for now I think we need it
to be more forgiving.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agofuse: retrieve: cap requested size to negotiated max_write
Kirill Smelkov [Wed, 27 Mar 2019 10:15:19 +0000 (10:15 +0000)]
fuse: retrieve: cap requested size to negotiated max_write

[ Upstream commit 7640682e67b33cab8628729afec8ca92b851394f ]

FUSE filesystem server and kernel client negotiate during initialization
phase, what should be the maximum write size the client will ever issue.
Correspondingly the filesystem server then queues sys_read calls to read
requests with buffer capacity large enough to carry request header + that
max_write bytes. A filesystem server is free to set its max_write in
anywhere in the range between [1*page, fc->max_pages*page]. In particular
go-fuse[2] sets max_write by default as 64K, wheres default fc->max_pages
corresponds to 128K. Libfuse also allows users to configure max_write, but
by default presets it to possible maximum.

If max_write is < fc->max_pages*page, and in NOTIFY_RETRIEVE handler we
allow to retrieve more than max_write bytes, corresponding prepared
NOTIFY_REPLY will be thrown away by fuse_dev_do_read, because the
filesystem server, in full correspondence with server/client contract, will
be only queuing sys_read with ~max_write buffer capacity, and
fuse_dev_do_read throws away requests that cannot fit into server request
buffer. In turn the filesystem server could get stuck waiting indefinitely
for NOTIFY_REPLY since NOTIFY_RETRIEVE handler returned OK which is
understood by clients as that NOTIFY_REPLY was queued and will be sent
back.

Cap requested size to negotiate max_write to avoid the problem.  This
aligns with the way NOTIFY_RETRIEVE handler works, which already
unconditionally caps requested retrieve size to fuse_conn->max_pages.  This
way it should not hurt NOTIFY_RETRIEVE semantic if we return less data than
was originally requested.

Please see [1] for context where the problem of stuck filesystem was hit
for real, how the situation was traced and for more involving patch that
did not make it into the tree.

[1] https://marc.info/?l=linux-fsdevel&m=155057023600853&w=2
[2] https://github.com/hanwen/go-fuse

Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Cc: Jakob Unterwurzacher <jakobunt@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonvmem: sunxi_sid: Support SID on A83T and H5
Chen-Yu Tsai [Sat, 13 Apr 2019 10:32:53 +0000 (11:32 +0100)]
nvmem: sunxi_sid: Support SID on A83T and H5

[ Upstream commit da75b8909756160b8e785104ba421a20b756c975 ]

The device tree binding already lists compatible strings for these two
SoCs. They don't have the defect as seen on the H3, and the size and
register layout is the same as the A64. Furthermore, the driver does
not include nvmem cell definitions.

Add support for these two compatible strings, re-using the config for
the A64.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonvmem: core: fix read buffer in place
Jorge Ramirez-Ortiz [Sat, 13 Apr 2019 10:32:58 +0000 (11:32 +0100)]
nvmem: core: fix read buffer in place

[ Upstream commit 2fe518fecb3a4727393be286db9804cd82ee2d91 ]

When the bit_offset in the cell is zero, the pointer to the msb will
not be properly initialized (ie, will still be pointing to the first
byte in the buffer).

This being the case, if there are bits to clear in the msb, those will
be left untouched while the mask will incorrectly clear bit positions
on the first byte.

This commit also makes sure that any byte unused in the cell is
cleared.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoALSA: hda - Register irq handler after the chip initialization
Takashi Iwai [Tue, 30 Apr 2019 10:18:28 +0000 (12:18 +0200)]
ALSA: hda - Register irq handler after the chip initialization

[ Upstream commit f495222e28275222ab6fd93813bd3d462e16d340 ]

Currently the IRQ handler in HD-audio controller driver is registered
before the chip initialization.  That is, we have some window opened
between the azx_acquire_irq() call and the CORB/RIRB setup.  If an
interrupt is triggered in this small window, the IRQ handler may
access to the uninitialized RIRB buffer, which leads to a NULL
dereference Oops.

This is usually no big problem since most of Intel chips do register
the IRQ via MSI, and we've already fixed the order of the IRQ
enablement and the CORB/RIRB setup in the former commit b61749a89f82
("sound: enable interrupt after dma buffer initialization"), hence the
IRQ won't be triggered in that room.  However, some platforms use a
shared IRQ, and this may allow the IRQ trigger by another source.

Another possibility is the kdump environment: a stale interrupt might
be present in there, the IRQ handler can be falsely triggered as well.

For covering this small race, let's move the azx_acquire_irq() call
after hda_intel_init_chip() call.  Although this is a bit radical
change, it can cover more widely than checking the CORB/RIRB setup
locally in the callee side.

Reported-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonetfilter: nf_flow_table: fix netdev refcnt leak
Taehee Yoo [Mon, 29 Apr 2019 16:55:29 +0000 (01:55 +0900)]
netfilter: nf_flow_table: fix netdev refcnt leak

[ Upstream commit 26a302afbe328ecb7507cae2035d938e6635131b ]

flow_offload_alloc() calls nf_route() to get a dst_entry. Internally,
nf_route() calls ip_route_output_key() that allocates a dst_entry and
holds it. So, a dst_entry should be released by dst_release() if
nf_route() is successful.

Otherwise, netns exit routine cannot be finished and the following
message is printed:

[  257.490952] unregister_netdevice: waiting for lo to become free. Usage count = 1

Fixes: ac2a66665e23 ("netfilter: add generic flow table infrastructure")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonetfilter: nf_flow_table: check ttl value in flow offload data path
Taehee Yoo [Mon, 29 Apr 2019 16:55:54 +0000 (01:55 +0900)]
netfilter: nf_flow_table: check ttl value in flow offload data path

[ Upstream commit 33cc3c0cfa64c86b6c4bbee86997aea638534931 ]

nf_flow_offload_ip_hook() and nf_flow_offload_ipv6_hook() do not check
ttl value. So, ttl value overflow may occur.

Fixes: 97add9f0d66d ("netfilter: flow table support for IPv4")
Fixes: 0995210753a2 ("netfilter: flow table support for IPv6")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonvme-pci: shutdown on timeout during deletion
Keith Busch [Tue, 30 Apr 2019 15:33:40 +0000 (09:33 -0600)]
nvme-pci: shutdown on timeout during deletion

[ Upstream commit 9dc1a38ef1925d23c2933c5867df816386d92ff8 ]

We do not restart a controller in a deleting state for timeout errors.
When in this state, unblock potential request dispatchers with failed
completions by shutting down the controller on timeout detection.

Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonvme-pci: unquiesce admin queue on shutdown
Keith Busch [Tue, 30 Apr 2019 15:33:41 +0000 (09:33 -0600)]
nvme-pci: unquiesce admin queue on shutdown

[ Upstream commit c8e9e9b7646ebe1c5066ddc420d7630876277eb4 ]

Just like IO queues, the admin queue also will not be restarted after a
controller shutdown. Unquiesce this queue so that we do not block
request dispatch on a permanently disabled controller.

Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoPCI: designware-ep: Use aligned ATU window for raising MSI interrupts
Kishon Vijay Abraham I [Mon, 25 Mar 2019 09:39:45 +0000 (15:09 +0530)]
PCI: designware-ep: Use aligned ATU window for raising MSI interrupts

[ Upstream commit 6b7330303a8186fb211357e6d379237fe9d2ece1 ]

Certain platforms like K2G reguires the outbound ATU window to be
aligned. The alignment size is already present in mem->page_size.
Use the alignment size present in mem->page_size to configure an
aligned ATU window. In order to raise an interrupt, CPU has to write
to address offset from the start of the window unlike before where
writes were always to the beginning of the ATU window.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomisc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test
Kishon Vijay Abraham I [Mon, 25 Mar 2019 09:39:47 +0000 (15:09 +0530)]
misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test

[ Upstream commit 8f220664570e755946db1282f48e07f26e1f2cb4 ]

commit 834b90519925 ("misc: pci_endpoint_test: Add support for
PCI_ENDPOINT_TEST regs to be mapped to any BAR") while adding
test_reg_bar in order to map PCI_ENDPOINT_TEST regs to be mapped to any
BAR failed to update test_reg_bar in pci_endpoint_test, resulting in
test_reg_bar having invalid value when used outside probe.

Fix it.

Fixes: 834b90519925 ("misc: pci_endpoint_test: Add support for PCI_ENDPOINT_TEST regs to be mapped to any BAR")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoiommu/vt-d: Set intel_iommu_gfx_mapped correctly
Lu Baolu [Thu, 2 May 2019 01:34:25 +0000 (09:34 +0800)]
iommu/vt-d: Set intel_iommu_gfx_mapped correctly

[ Upstream commit cf1ec4539a50bdfe688caad4615ca47646884316 ]

The intel_iommu_gfx_mapped flag is exported by the Intel
IOMMU driver to indicate whether an IOMMU is used for the
graphic device. In a virtualized IOMMU environment (e.g.
QEMU), an include-all IOMMU is used for graphic device.
This flag is found to be clear even the IOMMU is used.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Reported-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Fixes: c0771df8d5297 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.")
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoblk-mq: move cancel of requeue_work into blk_mq_release
Ming Lei [Tue, 30 Apr 2019 01:52:24 +0000 (09:52 +0800)]
blk-mq: move cancel of requeue_work into blk_mq_release

[ Upstream commit fbc2a15e3433058582e5635aabe48a3011a644a8 ]

With holding queue's kobject refcount, it is safe for driver
to schedule requeue. However, blk_mq_kick_requeue_list() may
be called after blk_sync_queue() is done because of concurrent
requeue activities, then requeue work may not be completed when
freeing queue, and kernel oops is triggered.

So moving the cancel of requeue_work into blk_mq_release() for
avoiding race between requeue and freeing queue.

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agowatchdog: fix compile time error of pretimeout governors
Vladimir Zapolskiy [Mon, 11 Mar 2019 23:54:25 +0000 (01:54 +0200)]
watchdog: fix compile time error of pretimeout governors

[ Upstream commit a223770bfa7b6647f3a70983257bd89f9cafce46 ]

CONFIG_WATCHDOG_PRETIMEOUT_GOV build symbol adds watchdog_pretimeout.o
object to watchdog.o, the latter is compiled only if CONFIG_WATCHDOG_CORE
is selected, so it rightfully makes sense to add it as a dependency.

The change fixes the next compilation errors, if CONFIG_WATCHDOG_CORE=n
and CONFIG_WATCHDOG_PRETIMEOUT_GOV=y are selected:

  drivers/watchdog/pretimeout_noop.o: In function `watchdog_gov_noop_register':
  drivers/watchdog/pretimeout_noop.c:35: undefined reference to `watchdog_register_governor'
  drivers/watchdog/pretimeout_noop.o: In function `watchdog_gov_noop_unregister':
  drivers/watchdog/pretimeout_noop.c:40: undefined reference to `watchdog_unregister_governor'

  drivers/watchdog/pretimeout_panic.o: In function `watchdog_gov_panic_register':
  drivers/watchdog/pretimeout_panic.c:35: undefined reference to `watchdog_register_governor'
  drivers/watchdog/pretimeout_panic.o: In function `watchdog_gov_panic_unregister':
  drivers/watchdog/pretimeout_panic.c:40: undefined reference to `watchdog_unregister_governor'

Reported-by: Kuo, Hsuan-Chi <hckuo2@illinois.edu>
Fixes: ff84136cb6a4 ("watchdog: add watchdog pretimeout governor framework")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agowatchdog: imx2_wdt: Fix set_timeout for big timeout values
Georg Hofmann [Mon, 8 Apr 2019 19:25:54 +0000 (21:25 +0200)]
watchdog: imx2_wdt: Fix set_timeout for big timeout values

[ Upstream commit b07e228eee69601addba98b47b1a3850569e5013 ]

The documentated behavior is: if max_hw_heartbeat_ms is implemented, the
minimum of the set_timeout argument and max_hw_heartbeat_ms should be used.
This patch implements this behavior.
Previously only the first 7bits were used and the input argument was
returned.

Signed-off-by: Georg Hofmann <georg@hofmannsweb.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonetfilter: nf_tables: fix base chain stat rcu_dereference usage
Florian Westphal [Tue, 30 Apr 2019 12:33:22 +0000 (14:33 +0200)]
netfilter: nf_tables: fix base chain stat rcu_dereference usage

[ Upstream commit edbd82c5fba009f68d20b5db585be1e667c605f6 ]

Following splat gets triggered when nfnetlink monitor is running while
xtables-nft selftests are running:

net/netfilter/nf_tables_api.c:1272 suspicious rcu_dereference_check() usage!
other info that might help us debug this:

1 lock held by xtables-nft-mul/27006:
 #0: 00000000e0f85be9 (&net->nft.commit_mutex){+.+.}, at: nf_tables_valid_genid+0x1a/0x50
Call Trace:
 nf_tables_fill_chain_info.isra.45+0x6cc/0x6e0
 nf_tables_chain_notify+0xf8/0x1a0
 nf_tables_commit+0x165c/0x1740

nf_tables_fill_chain_info() can be called both from dumps (rcu read locked)
or from the transaction path if a userspace process subscribed to nftables
notifications.

In the 'table dump' case, rcu_access_pointer() cannot be used: We do not
hold transaction mutex so the pointer can be NULLed right after the check.
Just unconditionally fetch the value, then have the helper return
immediately if its NULL.

In the notification case we don't hold the rcu read lock, but updates are
prevented due to transaction mutex. Use rcu_dereference_check() to make lockdep
aware of this.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomips: Make sure dt memory regions are valid
Serge Semin [Fri, 3 May 2019 17:50:40 +0000 (20:50 +0300)]
mips: Make sure dt memory regions are valid

[ Upstream commit 93fa5b280761a4dbb14c5330f260380385ab2b49 ]

There are situations when memory regions coming from dts may be
too big for the platform physical address space. This especially
concerns XPA-capable systems. Bootloader may determine more than 4GB
memory available and pass it to the kernel over dts memory node, while
kernel is built without XPA/64BIT support. In this case the region
may either simply be truncated by add_memory_region() method
or by u64->phys_addr_t type casting. But in worst case the method
can even drop the memory region if it exceeds PHYS_ADDR_MAX size.
So lets make sure the retrieved from dts memory regions are valid,
and if some of them aren't, just manually truncate them with a warning
printed out.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Serge Semin <Sergey.Semin@t-platforms.ru>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonetfilter: nf_conntrack_h323: restore boundary check correctness
Jakub Jankowski [Thu, 25 Apr 2019 21:46:50 +0000 (23:46 +0200)]
netfilter: nf_conntrack_h323: restore boundary check correctness

[ Upstream commit f5e85ce8e733c2547827f6268136b70b802eabdb ]

Since commit bc7d811ace4a ("netfilter: nf_ct_h323: Convert
CHECK_BOUND macro to function"), NAT traversal for H.323
doesn't work, failing to parse H323-UserInformation.
nf_h323_error_boundary() compares contents of the bitstring,
not the addresses, preventing valid H.323 packets from being
conntrack'd.

This looks like an oversight from when CHECK_BOUND macro was
converted to a function.

To fix it, stop dereferencing bs->cur and bs->end.

Fixes: bc7d811ace4a ("netfilter: nf_ct_h323: Convert CHECK_BOUND macro to function")
Signed-off-by: Jakub Jankowski <shasta@toxcorp.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonetfilter: nf_flow_table: fix missing error check for rhashtable_insert_fast
Taehee Yoo [Thu, 2 May 2019 16:56:38 +0000 (01:56 +0900)]
netfilter: nf_flow_table: fix missing error check for rhashtable_insert_fast

[ Upstream commit 43c8f131184faf20c07221f3e09724611c6525d8 ]

rhashtable_insert_fast() may return an error value when memory
allocation fails, but flow_offload_add() does not check for errors.
This patch just adds missing error checking.

Fixes: ac2a66665e23 ("netfilter: add generic flow table infrastructure")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agommc: mmci: Prevent polling for busy detection in IRQ context
Ludovic Barre [Fri, 26 Apr 2019 07:46:35 +0000 (09:46 +0200)]
mmc: mmci: Prevent polling for busy detection in IRQ context

[ Upstream commit 8520ce1e17799b220ff421d4f39438c9c572ade3 ]

The IRQ handler, mmci_irq(), loops until all status bits have been cleared.
However, the status bit signaling busy in variant->busy_detect_flag, may be
set even if busy detection isn't monitored for the current request.

This may be the case for the CMD11 when switching the I/O voltage, which
leads to that mmci_irq() busy loops in IRQ context. Fix this problem, by
clearing the status bit for busy, before continuing to validate the
condition for the loop. This is safe, because the busy status detection has
already been taken care of by mmci_cmd_irq().

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoovl: do not generate duplicate fsnotify events for "fake" path
Amir Goldstein [Wed, 24 Apr 2019 16:39:50 +0000 (19:39 +0300)]
ovl: do not generate duplicate fsnotify events for "fake" path

[ Upstream commit d989903058a83e8536cc7aadf9256a47d5c173fe ]

Overlayfs "fake" path is used for stacked file operations on underlying
files.  Operations on files with "fake" path must not generate fsnotify
events with path data, because those events have already been generated at
overlayfs layer and because the reported event->fd for fanotify marks on
underlying inode/filesystem will have the wrong path (the overlayfs path).

Link: https://lore.kernel.org/linux-fsdevel/20190423065024.12695-1-jencce.kernel@gmail.com/
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Fixes: d1d04ef8572b ("ovl: stack file ops")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoPCI: dwc: Free MSI IRQ page in dw_pcie_free_msi()
Jisheng Zhang [Fri, 29 Mar 2019 11:57:17 +0000 (11:57 +0000)]
PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi()

[ Upstream commit dc69a3d567941784c3d00e1d0834582b42b0b3e7 ]

To avoid a memory leak, free the page allocated for MSI IRQ in
dw_pcie_free_msi().

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoPCI: dwc: Free MSI in dw_pcie_host_init() error path
Jisheng Zhang [Fri, 29 Mar 2019 11:57:54 +0000 (11:57 +0000)]
PCI: dwc: Free MSI in dw_pcie_host_init() error path

[ Upstream commit 9e2b5de5604a6ff2626c51e77014d92c9299722c ]

If we ever did MSI-related initializations, we need to call
dw_pcie_free_msi() in the error code path.

Remove the IS_ENABLED(CONFIG_PCI_MSI) check for MSI init because
pci_msi_enabled() already has a stub for !CONFIG_PCI_MSI.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agouml: fix a boot splat wrt use of cpu_all_mask
Maciej Żenczykowski [Wed, 10 Apr 2019 18:11:23 +0000 (11:11 -0700)]
uml: fix a boot splat wrt use of cpu_all_mask

[ Upstream commit 689a58605b63173acb0a8cf954af6a8f60440c93 ]

Memory: 509108K/542612K available (3835K kernel code, 919K rwdata, 1028K rodata, 129K init, 211K bss, 33504K reserved, 0K cma-reserved)
NR_IRQS: 15
clocksource: timer: mask: 0xffffffffffffffff max_cycles: 0x1cd42e205, max_idle_ns: 881590404426 ns
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/time/clockevents.c:458 clockevents_register_device+0x72/0x140
posix-timer cpumask == cpu_all_mask, using cpu_possible_mask instead
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc4-00048-ged79cc87302b #4
Stack:
 604ebda0 603c5370 604ebe20 6046fd17
 00000000 6006fcbb 604ebdb0 603c53b5
 604ebe10 6003bfc4 604ebdd0 9000001ca
Call Trace:
 [<6006fcbb>] ? printk+0x0/0x94
 [<60083160>] ? clockevents_register_device+0x72/0x140
 [<6001f16e>] show_stack+0x13b/0x155
 [<603c5370>] ? dump_stack_print_info+0xe2/0xeb
 [<6006fcbb>] ? printk+0x0/0x94
 [<603c53b5>] dump_stack+0x2a/0x2c
 [<6003bfc4>] __warn+0x10e/0x13e
 [<60070320>] ? vprintk_func+0xc8/0xcf
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<6003c08b>] warn_slowpath_fmt+0x97/0x99
 [<600311a1>] ? set_signals+0x0/0x3f
 [<6003bff4>] ? warn_slowpath_fmt+0x0/0x99
 [<600842cb>] ? tick_oneshot_mode_active+0x44/0x4f
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<6007d2d5>] ? __clocksource_select+0x20/0x1b1
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<60083160>] clockevents_register_device+0x72/0x140
 [<60031192>] ? get_signals+0x0/0xf
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<60002eec>] um_timer_setup+0xc8/0xca
 [<60001b59>] start_kernel+0x47f/0x57e
 [<600035bc>] start_kernel_proc+0x49/0x4d
 [<6006c483>] ? kmsg_dump_register+0x82/0x8a
 [<6001de62>] new_thread_handler+0x81/0xb2
 [<60003571>] ? kmsg_dumper_stdout_init+0x1a/0x1c
 [<60020c75>] uml_finishsetup+0x54/0x59

random: get_random_bytes called from init_oops_id+0x27/0x34 with crng_init=0
---[ end trace 00173d0117a88acb ]---
Calibrating delay loop... 6941.90 BogoMIPS (lpj=34709504)

Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: linux-um@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoconfigfs: fix possible use-after-free in configfs_register_group
YueHaibing [Sun, 5 May 2019 03:03:12 +0000 (11:03 +0800)]
configfs: fix possible use-after-free in configfs_register_group

[ Upstream commit 35399f87e271f7cf3048eab00a421a6519ac8441 ]

In configfs_register_group(), if create_default_group() failed, we
forget to unlink the group. It will left a invalid item in the parent list,
which may trigger the use-after-free issue seen below:

BUG: KASAN: use-after-free in __list_add_valid+0xd4/0xe0 lib/list_debug.c:26
Read of size 8 at addr ffff8881ef61ae20 by task syz-executor.0/5996

CPU: 1 PID: 5996 Comm: syz-executor.0 Tainted: G         C        5.0.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xa9/0x10e lib/dump_stack.c:113
 print_address_description+0x65/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 __list_add_valid+0xd4/0xe0 lib/list_debug.c:26
 __list_add include/linux/list.h:60 [inline]
 list_add_tail include/linux/list.h:93 [inline]
 link_obj+0xb0/0x190 fs/configfs/dir.c:759
 link_group+0x1c/0x130 fs/configfs/dir.c:784
 configfs_register_group+0x56/0x1e0 fs/configfs/dir.c:1751
 configfs_register_default_group+0x72/0xc0 fs/configfs/dir.c:1834
 ? 0xffffffffc1be0000
 iio_sw_trigger_init+0x23/0x1000 [industrialio_sw_trigger]
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f494ecbcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00007f494ecbcc70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f494ecbd6bc
R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004

Allocated by task 5987:
 set_track mm/kasan/common.c:87 [inline]
 __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:497
 kmalloc include/linux/slab.h:545 [inline]
 kzalloc include/linux/slab.h:740 [inline]
 configfs_register_default_group+0x4c/0xc0 fs/configfs/dir.c:1829
 0xffffffffc1bd0023
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 5987:
 set_track mm/kasan/common.c:87 [inline]
 __kasan_slab_free+0x130/0x180 mm/kasan/common.c:459
 slab_free_hook mm/slub.c:1429 [inline]
 slab_free_freelist_hook mm/slub.c:1456 [inline]
 slab_free mm/slub.c:3003 [inline]
 kfree+0xe1/0x270 mm/slub.c:3955
 configfs_register_default_group+0x9a/0xc0 fs/configfs/dir.c:1836
 0xffffffffc1bd0023
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881ef61ae00
 which belongs to the cache kmalloc-192 of size 192
The buggy address is located 32 bytes inside of
 192-byte region [ffff8881ef61ae00ffff8881ef61aec0)
The buggy address belongs to the page:
page:ffffea0007bd8680 count:1 mapcount:0 mapping:ffff8881f6c03000 index:0xffff8881ef61a700
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 ffffea0007ca4740 0000000500000005 ffff8881f6c03000
raw: ffff8881ef61a700 000000008010000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881ef61ad00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8881ef61ad80: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
>ffff8881ef61ae00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                               ^
 ffff8881ef61ae80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff8881ef61af00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 5cf6a51e6062 ("configfs: allow dynamic group creation")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agopercpu: remove spurious lock dependency between percpu and sched
John Sperbeck [Wed, 8 May 2019 01:43:20 +0000 (18:43 -0700)]
percpu: remove spurious lock dependency between percpu and sched

[ Upstream commit 198790d9a3aeaef5792d33a560020861126edc22 ]

In free_percpu() we sometimes call pcpu_schedule_balance_work() to
queue a work item (which does a wakeup) while holding pcpu_lock.
This creates an unnecessary lock dependency between pcpu_lock and
the scheduler's pi_lock.  There are other places where we call
pcpu_schedule_balance_work() without hold pcpu_lock, and this case
doesn't need to be different.

Moving the call outside the lock prevents the following lockdep splat
when running tools/testing/selftests/bpf/{test_maps,test_progs} in
sequence with lockdep enabled:

======================================================
WARNING: possible circular locking dependency detected
5.1.0-dbg-DEV #1 Not tainted
------------------------------------------------------
kworker/23:255/18872 is trying to acquire lock:
000000000bc79290 (&(&pool->lock)->rlock){-.-.}, at: __queue_work+0xb2/0x520

but task is already holding lock:
00000000e3e7a6aa (pcpu_lock){..-.}, at: free_percpu+0x36/0x260

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #4 (pcpu_lock){..-.}:
       lock_acquire+0x9e/0x180
       _raw_spin_lock_irqsave+0x3a/0x50
       pcpu_alloc+0xfa/0x780
       __alloc_percpu_gfp+0x12/0x20
       alloc_htab_elem+0x184/0x2b0
       __htab_percpu_map_update_elem+0x252/0x290
       bpf_percpu_hash_update+0x7c/0x130
       __do_sys_bpf+0x1912/0x1be0
       __x64_sys_bpf+0x1a/0x20
       do_syscall_64+0x59/0x400
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

-> #3 (&htab->buckets[i].lock){....}:
       lock_acquire+0x9e/0x180
       _raw_spin_lock_irqsave+0x3a/0x50
       htab_map_update_elem+0x1af/0x3a0

-> #2 (&rq->lock){-.-.}:
       lock_acquire+0x9e/0x180
       _raw_spin_lock+0x2f/0x40
       task_fork_fair+0x37/0x160
       sched_fork+0x211/0x310
       copy_process.part.43+0x7b1/0x2160
       _do_fork+0xda/0x6b0
       kernel_thread+0x29/0x30
       rest_init+0x22/0x260
       arch_call_rest_init+0xe/0x10
       start_kernel+0x4fd/0x520
       x86_64_start_reservations+0x24/0x26
       x86_64_start_kernel+0x6f/0x72
       secondary_startup_64+0xa4/0xb0

-> #1 (&p->pi_lock){-.-.}:
       lock_acquire+0x9e/0x180
       _raw_spin_lock_irqsave+0x3a/0x50
       try_to_wake_up+0x41/0x600
       wake_up_process+0x15/0x20
       create_worker+0x16b/0x1e0
       workqueue_init+0x279/0x2ee
       kernel_init_freeable+0xf7/0x288
       kernel_init+0xf/0x180
       ret_from_fork+0x24/0x30

-> #0 (&(&pool->lock)->rlock){-.-.}:
       __lock_acquire+0x101f/0x12a0
       lock_acquire+0x9e/0x180
       _raw_spin_lock+0x2f/0x40
       __queue_work+0xb2/0x520
       queue_work_on+0x38/0x80
       free_percpu+0x221/0x260
       pcpu_freelist_destroy+0x11/0x20
       stack_map_free+0x2a/0x40
       bpf_map_free_deferred+0x3c/0x50
       process_one_work+0x1f7/0x580
       worker_thread+0x54/0x410
       kthread+0x10f/0x150
       ret_from_fork+0x24/0x30

other info that might help us debug this:

Chain exists of:
  &(&pool->lock)->rlock --> &htab->buckets[i].lock --> pcpu_lock

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(pcpu_lock);
                               lock(&htab->buckets[i].lock);
                               lock(pcpu_lock);
  lock(&(&pool->lock)->rlock);

 *** DEADLOCK ***

3 locks held by kworker/23:255/18872:
 #0: 00000000b36a6e16 ((wq_completion)events){+.+.},
     at: process_one_work+0x17a/0x580
 #1: 00000000dfd966f0 ((work_completion)(&map->work)){+.+.},
     at: process_one_work+0x17a/0x580
 #2: 00000000e3e7a6aa (pcpu_lock){..-.},
     at: free_percpu+0x36/0x260

stack backtrace:
CPU: 23 PID: 18872 Comm: kworker/23:255 Not tainted 5.1.0-dbg-DEV #1
Hardware name: ...
Workqueue: events bpf_map_free_deferred
Call Trace:
 dump_stack+0x67/0x95
 print_circular_bug.isra.38+0x1c6/0x220
 check_prev_add.constprop.50+0x9f6/0xd20
 __lock_acquire+0x101f/0x12a0
 lock_acquire+0x9e/0x180
 _raw_spin_lock+0x2f/0x40
 __queue_work+0xb2/0x520
 queue_work_on+0x38/0x80
 free_percpu+0x221/0x260
 pcpu_freelist_destroy+0x11/0x20
 stack_map_free+0x2a/0x40
 bpf_map_free_deferred+0x3c/0x50
 process_one_work+0x1f7/0x580
 worker_thread+0x54/0x410
 kthread+0x10f/0x150
 ret_from_fork+0x24/0x30

Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agof2fs: fix to do checksum even if inode page is uptodate
Chao Yu [Mon, 15 Apr 2019 07:28:35 +0000 (15:28 +0800)]
f2fs: fix to do checksum even if inode page is uptodate

[ Upstream commit b42b179bda9ff11075a6fc2bac4d9e400513679a ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203221

- Overview
When mounting the attached crafted image and running program, this error is reported.

The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.

- Reproduces
cc poc_07.c
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out

- Messages
 kernel BUG at fs/f2fs/node.c:1279!
 RIP: 0010:read_node_page+0xcf/0xf0
 Call Trace:
  __get_node_page+0x6b/0x2f0
  f2fs_iget+0x8f/0xdf0
  f2fs_lookup+0x136/0x320
  __lookup_slow+0x92/0x140
  lookup_slow+0x30/0x50
  walk_component+0x1c1/0x350
  path_lookupat+0x62/0x200
  filename_lookup+0xb3/0x1a0
  do_fchmodat+0x3e/0xa0
  __x64_sys_chmod+0x12/0x20
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

On below paths, we can have opportunity to readahead inode page
- gc_node_segment -> f2fs_ra_node_page
- gc_data_segment -> f2fs_ra_node_page
- f2fs_fill_dentries -> f2fs_ra_node_page

Unlike synchronized read, on readahead path, we can set page uptodate
before verifying page's checksum, then read_node_page() will trigger
kernel panic once it encounters a uptodated page w/ incorrect checksum.

So considering readahead scenario, we have to do checksum each time
when loading inode page even if it is uptodated.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agof2fs: fix to do sanity check on valid block count of segment
Chao Yu [Mon, 15 Apr 2019 07:30:51 +0000 (15:30 +0800)]
f2fs: fix to do sanity check on valid block count of segment

[ Upstream commit e95bcdb2fefa129f37bd9035af1d234ca92ee4ef ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203233

- Overview
When mounting the attached crafted image and running program, following errors are reported.
Additionally, it hangs on sync after running program.

The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y

- Reproduces
cc poc_13.c
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out
sync

- Kernel messages
 F2FS-fs (sdb): Bitmap was wrongly set, blk:4608
 kernel BUG at fs/f2fs/segment.c:2102!
 RIP: 0010:update_sit_entry+0x394/0x410
 Call Trace:
  f2fs_allocate_data_block+0x16f/0x660
  do_write_page+0x62/0x170
  f2fs_do_write_node_page+0x33/0xa0
  __write_node_page+0x270/0x4e0
  f2fs_sync_node_pages+0x5df/0x670
  f2fs_write_checkpoint+0x372/0x1400
  f2fs_sync_fs+0xa3/0x130
  f2fs_do_sync_file+0x1a6/0x810
  do_fsync+0x33/0x60
  __x64_sys_fsync+0xb/0x10
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

sit.vblocks and sum valid block count in sit.valid_map may be
inconsistent, segment w/ zero vblocks will be treated as free
segment, while allocating in free segment, we may allocate a
free block, if its bitmap is valid previously, it can cause
kernel crash due to bitmap verification failure.

Anyway, to avoid further serious metadata inconsistence and
corruption, it is necessary and worth to detect SIT
inconsistence. So let's enable check_block_count() to verify
vblocks and valid_map all the time rather than do it only
CONFIG_F2FS_CHECK_FS is enabled.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agof2fs: fix to use inline space only if inline_xattr is enable
Chao Yu [Thu, 11 Apr 2019 03:48:10 +0000 (11:48 +0800)]
f2fs: fix to use inline space only if inline_xattr is enable

[ Upstream commit 622927f3b8809206f6da54a6a7ed4df1a7770fce ]

With below mkfs and mount option:

MKFS_OPTIONS  -- -O extra_attr -O project_quota -O inode_checksum -O flexible_inline_xattr -O inode_crtime -f
MOUNT_OPTIONS -- -o noinline_xattr

We may miss xattr data with below testcase:
- mkdir dir
- setfattr -n "user.name" -v 0 dir
- for ((i = 0; i < 190; i++)) do touch dir/$i; done
- umount
- mount
- getfattr -n "user.name" dir

user.name: No such attribute

The root cause is that we persist xattr data into reserved inline xattr
space, even if inline_xattr is not enable in inline directory inode, after
inline dentry conversion, reserved space no longer exists, so that xattr
data missed.

Let's use inline xattr space only if inline_xattr flag is set on inode
to fix this iusse.

Fixes: 6afc662e68b5 ("f2fs: support flexible inline xattr size")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agof2fs: fix to avoid panic in dec_valid_block_count()
Chao Yu [Mon, 15 Apr 2019 07:28:30 +0000 (15:28 +0800)]
f2fs: fix to avoid panic in dec_valid_block_count()

[ Upstream commit 5e159cd349bf3a31fb7e35c23a93308eb30f4f71 ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203209

- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after the this script.

The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.

- Reproduces
cc poc_01.c
./run.sh f2fs
sync

 kernel BUG at fs/f2fs/f2fs.h:1788!
 RIP: 0010:f2fs_truncate_data_blocks_range+0x342/0x350
 Call Trace:
  f2fs_truncate_blocks+0x36d/0x3c0
  f2fs_truncate+0x88/0x110
  f2fs_setattr+0x3e1/0x460
  notify_change+0x2da/0x400
  do_truncate+0x6d/0xb0
  do_sys_ftruncate+0xf1/0x160
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

The reason is dec_valid_block_count() will trigger kernel panic due to
inconsistent count in between inode.i_blocks and actual block.

To avoid panic, let's just print debug message and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix build warning and add unlikely]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agof2fs: fix to clear dirty inode in error path of f2fs_iget()
Chao Yu [Mon, 15 Apr 2019 07:28:33 +0000 (15:28 +0800)]
f2fs: fix to clear dirty inode in error path of f2fs_iget()

[ Upstream commit 546d22f070d64a7b96f57c93333772085d3a5e6d ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203217

- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after running the program.

The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.

- Reproduces
cc poc_test_05.c
mkdir test
mount -t f2fs tmp.img test
sudo ./a.out
sync

- Messages
 kernel BUG at fs/f2fs/inode.c:707!
 RIP: 0010:f2fs_evict_inode+0x33f/0x3a0
 Call Trace:
  evict+0xba/0x180
  f2fs_iget+0x598/0xdf0
  f2fs_lookup+0x136/0x320
  __lookup_slow+0x92/0x140
  lookup_slow+0x30/0x50
  walk_component+0x1c1/0x350
  path_lookupat+0x62/0x200
  filename_lookup+0xb3/0x1a0
  do_readlinkat+0x56/0x110
  __x64_sys_readlink+0x16/0x20
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

During inode loading, __recover_inline_status() can recovery inode status
and set inode dirty, once we failed in following process, it will fail
the check in f2fs_evict_inode, result in trigger BUG_ON().

Let's clear dirty inode in error path of f2fs_iget() to avoid panic.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agof2fs: fix to do sanity check on free nid
Chao Yu [Mon, 15 Apr 2019 07:28:36 +0000 (15:28 +0800)]
f2fs: fix to do sanity check on free nid

[ Upstream commit 626bcf2b7ce87211dba565f2bfa7842ba5be5c1b ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203225

- Overview
When mounting the attached crafted image and unmounting it, following errors are reported.
Additionally, it hangs on sync after unmounting.

The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y

- Reproduces
mkdir test
mount -t f2fs tmp.img test
touch test/t
umount test
sync

- Messages
 kernel BUG at fs/f2fs/node.c:3073!
 RIP: 0010:f2fs_destroy_node_manager+0x2f0/0x300
 Call Trace:
  f2fs_put_super+0xf4/0x270
  generic_shutdown_super+0x62/0x110
  kill_block_super+0x1c/0x50
  kill_f2fs_super+0xad/0xd0
  deactivate_locked_super+0x35/0x60
  cleanup_mnt+0x36/0x70
  task_work_run+0x75/0x90
  exit_to_usermode_loop+0x93/0xa0
  do_syscall_64+0xba/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0010:f2fs_destroy_node_manager+0x2f0/0x300

NAT table is corrupted, so reserved meta/node inode ids were added into
free list incorrectly, during file creation, since reserved id has cached
in inode hash, so it fails the creation and preallocated nid can not be
released later, result in kernel panic.

To fix this issue, let's do nid boundary check during free nid loading.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agof2fs: fix to avoid panic in f2fs_remove_inode_page()
Chao Yu [Mon, 15 Apr 2019 07:28:34 +0000 (15:28 +0800)]
f2fs: fix to avoid panic in f2fs_remove_inode_page()

[ Upstream commit 8b6810f8acfe429fde7c7dad4714692cc5f75651 ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203219

- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after running the program.

The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.

- Reproduces
cc poc_06.c
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out
sync

- Messages
 kernel BUG at fs/f2fs/node.c:1183!
 RIP: 0010:f2fs_remove_inode_page+0x294/0x2d0
 Call Trace:
  f2fs_evict_inode+0x2a3/0x3a0
  evict+0xba/0x180
  __dentry_kill+0xbe/0x160
  dentry_kill+0x46/0x180
  dput+0xbb/0x100
  do_renameat2+0x3c9/0x550
  __x64_sys_rename+0x17/0x20
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

The reason is f2fs_remove_inode_page() will trigger kernel panic due to
inconsistent i_blocks value of inode.

To avoid panic, let's just print debug message and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing of potential image corruption.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix build warning and add unlikely]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agof2fs: fix to avoid panic in f2fs_inplace_write_data()
Chao Yu [Mon, 15 Apr 2019 07:30:52 +0000 (15:30 +0800)]
f2fs: fix to avoid panic in f2fs_inplace_write_data()

[ Upstream commit 05573d6ccf702df549a7bdeabef31e4753df1a90 ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203239

- Overview
When mounting the attached crafted image and running program, following errors are reported.
Additionally, it hangs on sync after running program.

The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y

- Reproduces
cc poc_15.c
./run.sh f2fs
sync

- Kernel messages
 ------------[ cut here ]------------
 kernel BUG at fs/f2fs/segment.c:3162!
 RIP: 0010:f2fs_inplace_write_data+0x12d/0x160
 Call Trace:
  f2fs_do_write_data_page+0x3c1/0x820
  __write_data_page+0x156/0x720
  f2fs_write_cache_pages+0x20d/0x460
  f2fs_write_data_pages+0x1b4/0x300
  do_writepages+0x15/0x60
  __filemap_fdatawrite_range+0x7c/0xb0
  file_write_and_wait_range+0x2c/0x80
  f2fs_do_sync_file+0x102/0x810
  do_fsync+0x33/0x60
  __x64_sys_fsync+0xb/0x10
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

The reason is f2fs_inplace_write_data() will trigger kernel panic due
to data block locates in node type segment.

To avoid panic, let's just return error code and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agof2fs: fix to avoid panic in do_recover_data()
Chao Yu [Mon, 15 Apr 2019 07:28:37 +0000 (15:28 +0800)]
f2fs: fix to avoid panic in do_recover_data()

[ Upstream commit 22d61e286e2d9097dae36f75ed48801056b77cac ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203227

- Overview
When mounting the attached crafted image, following errors are reported.
Additionally, it hangs on sync after trying to mount it.

The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y

- Reproduces
mkdir test
mount -t f2fs tmp.img test
sync

- Messages
 kernel BUG at fs/f2fs/recovery.c:549!
 RIP: 0010:recover_data+0x167a/0x1780
 Call Trace:
  f2fs_recover_fsync_data+0x613/0x710
  f2fs_fill_super+0x1043/0x1aa0
  mount_bdev+0x16d/0x1a0
  mount_fs+0x4a/0x170
  vfs_kern_mount+0x5d/0x100
  do_mount+0x200/0xcf0
  ksys_mount+0x79/0xc0
  __x64_sys_mount+0x1c/0x20
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

During recovery, if ofs_of_node is inconsistent in between recovered
node page and original checkpointed node page, let's just fail recovery
instead of making kernel panic.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agontp: Allow TAI-UTC offset to be set to zero
Miroslav Lichvar [Wed, 17 Apr 2019 08:48:33 +0000 (10:48 +0200)]
ntp: Allow TAI-UTC offset to be set to zero

[ Upstream commit fdc6bae940ee9eb869e493990540098b8c0fd6ab ]

The ADJ_TAI adjtimex mode sets the TAI-UTC offset of the system clock.
It is typically set by NTP/PTP implementations and it is automatically
updated by the kernel on leap seconds. The initial value is zero (which
applications may interpret as unknown), but this value cannot be set by
adjtimex. This limitation seems to go back to the original "nanokernel"
implementation by David Mills.

Change the ADJ_TAI check to accept zero as a valid TAI-UTC offset in
order to allow setting it back to the initial value.

Fixes: 153b5d054ac2 ("ntp: support for TAI")
Suggested-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Link: https://lkml.kernel.org/r/20190417084833.7401-1-mlichvar@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomailbox: stm32-ipcc: check invalid irq
Fabien Dessenne [Wed, 24 Apr 2019 15:51:05 +0000 (17:51 +0200)]
mailbox: stm32-ipcc: check invalid irq

[ Upstream commit 68a1c8485cf83734d4da9d81cd3b5d2ae7c0339b ]

On failure of_irq_get() returns a negative value or zero, which is
not handled as an error in the existing implementation.
Instead of using this API, use platform_get_irq() that returns
exclusively a negative value on failure.
Also, do not output an error log in case of defer probe error.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agopwm: meson: Use the spin-lock only to protect register modifications
Martin Blumenstingl [Mon, 1 Apr 2019 17:57:48 +0000 (19:57 +0200)]
pwm: meson: Use the spin-lock only to protect register modifications

[ Upstream commit f173747fffdf037c791405ab4f1ec0eb392fc48e ]

Holding the spin-lock for all of the code in meson_pwm_apply() can
result in a "BUG: scheduling while atomic". This can happen because
clk_get_rate() (which is called from meson_pwm_calc()) may sleep.
Only hold the spin-lock when modifying registers to solve this.

The reason why we need a spin-lock in the driver is because the
REG_MISC_AB register is shared between the two channels provided by one
PWM controller. The only functions where REG_MISC_AB is modified are
meson_pwm_enable() and meson_pwm_disable() so the register reads/writes
in there need to be protected by the spin-lock.

The original code also used the spin-lock to protect the values in
struct meson_pwm_channel. This could be necessary if two consumers can
use the same PWM channel. However, PWM core doesn't allow this so we
don't need to protect the values in struct meson_pwm_channel with a
lock.

Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoEDAC/mpc85xx: Prevent building as a module
Michael Ellerman [Thu, 2 May 2019 14:19:41 +0000 (00:19 +1000)]
EDAC/mpc85xx: Prevent building as a module

[ Upstream commit 2b8358a951b1e2a534a54924cd8245e58a1c5fb8 ]

The mpc85xx EDAC driver can be configured as a module but then fails to
build because it uses two unexported symbols:

  ERROR: ".pci_find_hose_for_OF_device" [drivers/edac/mpc85xx_edac_mod.ko] undefined!
  ERROR: ".early_find_capability" [drivers/edac/mpc85xx_edac_mod.ko] undefined!

We don't want to export those symbols just for this driver, so make the
driver only configurable as a built-in.

This seems to have been broken since at least

  c92132f59806 ("edac/85xx: Add PCIe error interrupt edac support")

(Nov 2013).

 [ bp: make it depend on EDAC=y so that the EDAC core doesn't get built
   as a module. ]

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linuxppc-dev@ozlabs.org
Cc: morbidrsa@gmail.com
Link: https://lkml.kernel.org/r/20190502141941.12927-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agobpf: fix undefined behavior in narrow load handling
Krzesimir Nowak [Wed, 8 May 2019 16:08:58 +0000 (18:08 +0200)]
bpf: fix undefined behavior in narrow load handling

[ Upstream commit e2f7fc0ac6957cabff4cecf6c721979b571af208 ]

Commit 31fd85816dbe ("bpf: permits narrower load from bpf program
context fields") made the verifier add AND instructions to clear the
unwanted bits with a mask when doing a narrow load. The mask is
computed with

  (1 << size * 8) - 1

where "size" is the size of the narrow load. When doing a 4 byte load
of a an 8 byte field the verifier shifts the literal 1 by 32 places to
the left. This results in an overflow of a signed integer, which is an
undefined behavior. Typically, the computed mask was zero, so the
result of the narrow load ended up being zero too.

Cast the literal to long long to avoid overflows. Note that narrow
load of the 4 byte fields does not have the undefined behavior,
because the load size can only be either 1 or 2 bytes, so shifting 1
by 8 or 16 places will not overflow it. And reading 4 bytes would not
be a narrow load of a 4 bytes field.

Fixes: 31fd85816dbe ("bpf: permits narrower load from bpf program context fields")
Reviewed-by: Alban Crequy <alban@kinvolk.io>
Reviewed-by: Iago López Galeiras <iago@kinvolk.io>
Signed-off-by: Krzesimir Nowak <krzesimir@kinvolk.io>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agodrm/nouveau/kms/gv100-: fix spurious window immediate interlocks
Ben Skeggs [Fri, 3 May 2019 02:23:55 +0000 (12:23 +1000)]
drm/nouveau/kms/gv100-: fix spurious window immediate interlocks

[ Upstream commit d2434e4d942c32cadcbdbcd32c58f35098f3b604 ]

Cursor position updates were accidentally causing us to attempt to interlock
window with window immediate, and without a matching window immediate update,
NVDisplay could hang forever in some circumstances.

Fixes suspend/resume on (at least) Quadro RTX4000 (TU104).

Reported-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoobjtool: Don't use ignore flag for fake jumps
Josh Poimboeuf [Mon, 13 May 2019 17:01:31 +0000 (12:01 -0500)]
objtool: Don't use ignore flag for fake jumps

[ Upstream commit e6da9567959e164f82bc81967e0d5b10dee870b4 ]

The ignore flag is set on fake jumps in order to keep
add_jump_destinations() from setting their jump_dest, since it already
got set when the fake jump was created.

But using the ignore flag is a bit of a hack.  It's normally used to
skip validation of an instruction, which doesn't really make sense for
fake jumps.

Also, after the next patch, using the ignore flag for fake jumps can
trigger a false "why am I validating an ignored function?" warning.

Instead just add an explicit check in add_jump_destinations() to skip
fake jumps.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/71abc072ff48b2feccc197723a9c52859476c068.1557766718.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agodrm/bridge: adv7511: Fix low refresh rate selection
Matt Redfearn [Wed, 24 Apr 2019 13:22:27 +0000 (13:22 +0000)]
drm/bridge: adv7511: Fix low refresh rate selection

[ Upstream commit 67793bd3b3948dc8c8384b6430e036a30a0ecb43 ]

The driver currently sets register 0xfb (Low Refresh Rate) based on the
value of mode->vrefresh. Firstly, this field is specified to be in Hz,
but the magic numbers used by the code are Hz * 1000. This essentially
leads to the low refresh rate always being set to 0x01, since the
vrefresh value will always be less than 24000. Fix the magic numbers to
be in Hz.
Secondly, according to the comment in drm_modes.h, the field is not
supposed to be used in a functional way anyway. Instead, use the helper
function drm_mode_vrefresh().

Fixes: 9c8af882bf12 ("drm: Add adv7511 encoder driver")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424132210.26338-1-matt.redfearn@thinci.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agodrm/nouveau/kms/gf119-gp10x: push HeadSetControlOutputResource() mthd when encoders...
Ben Skeggs [Wed, 8 May 2019 04:54:34 +0000 (14:54 +1000)]
drm/nouveau/kms/gf119-gp10x: push HeadSetControlOutputResource() mthd when encoders change

[ Upstream commit a0b694d0af21c9993d1a39a75fd814bd48bf7eb4 ]

HW has error checks in place which check that pixel depth is explicitly
provided on DP, while HDMI has a "default" setting that we use.

In multi-display configurations with identical modelines, but different
protocols (HDMI + DP, in this case), it was possible for the DP head to
get swapped to the head which previously drove the HDMI output, without
updating HeadSetControlOutputResource(), triggering the error check and
hanging the core update.

Reported-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoperf/x86/intel: Allow PEBS multi-entry in watermark mode
Stephane Eranian [Tue, 14 May 2019 00:34:00 +0000 (17:34 -0700)]
perf/x86/intel: Allow PEBS multi-entry in watermark mode

[ Upstream commit c7a286577d7592720c2f179aadfb325a1ff48c95 ]

This patch fixes a restriction/bug introduced by:

   583feb08e7f7 ("perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS")

The original patch prevented using multi-entry PEBS when wakeup_events != 0.
However given that wakeup_events is part of a union with wakeup_watermark, it
means that in watermark mode, PEBS multi-entry is also disabled which is not the
intent. This patch fixes this by checking is watermark mode is enabled.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Cc: vincent.weaver@maine.edu
Fixes: 583feb08e7f7 ("perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS")
Link: http://lkml.kernel.org/r/20190514003400.224340-1-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: twl6040: Fix device init errors for ACCCTL register
Tony Lindgren [Thu, 14 Feb 2019 16:03:45 +0000 (08:03 -0800)]
mfd: twl6040: Fix device init errors for ACCCTL register

[ Upstream commit 48171d0ea7caccf21c9ee3ae75eb370f2a756062 ]

I noticed that we can get a -EREMOTEIO errors on at least omap4 duovero:

twl6040 0-004b: Failed to write 2d = 19: -121

And then any following register access will produce errors.

There 2d offset above is register ACCCTL that gets written on twl6040
powerup. With error checking added to the related regcache_sync() call,
the -EREMOTEIO error is reproducable on twl6040 powerup at least
duovero.

To fix the error, we need to wait until twl6040 is accessible after the
powerup. Based on tests on omap4 duovero, we need to wait over 8ms after
powerup before register write will complete without failures. Let's also
make sure we warn about possible errors too.

Note that we have twl6040_patch[] reg_sequence with the ACCCTL register
configuration and regcache_sync() will write the new value to ACCCTL.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agodrm/nouveau/disp/dp: respect sink limits when selecting failsafe link configuration
Ben Skeggs [Fri, 10 May 2019 01:57:04 +0000 (11:57 +1000)]
drm/nouveau/disp/dp: respect sink limits when selecting failsafe link configuration

[ Upstream commit 13d03e9daf70dab032c03dc172e75bb98ad899c4 ]

Where possible, we want the failsafe link configuration (one which won't
hang the OR during modeset because of not enough bandwidth for the mode)
to also be supported by the sink.

This prevents "link rate unsupported by sink" messages when link training
fails.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: intel-lpss: Set the device in reset state when init
Binbin Wu [Mon, 8 Apr 2019 08:09:10 +0000 (16:09 +0800)]
mfd: intel-lpss: Set the device in reset state when init

[ Upstream commit dad06532292d77f37fbe831a02948a593500f682 ]

In virtualized setup, when system reboots due to warm
reset interrupt storm is seen.

Call Trace:
<IRQ>
dump_stack+0x70/0xa5
__report_bad_irq+0x2e/0xc0
note_interrupt+0x248/0x290
? add_interrupt_randomness+0x30/0x220
handle_irq_event_percpu+0x54/0x80
handle_irq_event+0x39/0x60
handle_fasteoi_irq+0x91/0x150
handle_irq+0x108/0x180
do_IRQ+0x52/0xf0
common_interrupt+0xf/0xf
</IRQ>
RIP: 0033:0x76fc2cfabc1d
Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e
94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18
<48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04
24
RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda
RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce
RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010
RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0
R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0
R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414
handlers:
[<000000000d3fa913>] idma64_irq
Disabling IRQ #27

To avoid interrupt storm, set the device in reset state
before bringing out the device from reset state.

Changelog v2:
- correct the subject line by adding "mfd: "

Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: tps65912-spi: Add missing of table registration
Daniel Gomez [Mon, 22 Apr 2019 19:09:50 +0000 (21:09 +0200)]
mfd: tps65912-spi: Add missing of table registration

[ Upstream commit 9e364e87ad7f2c636276c773d718cda29d62b741 ]

MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT
OF mathing mechanism and register it.

Before this patch:
modinfo drivers/mfd/tps65912-spi.ko | grep alias
alias:          spi:tps65912

After this patch:
modinfo drivers/mfd/tps65912-spi.ko | grep alias
alias:          of:N*T*Cti,tps65912C*
alias:          of:N*T*Cti,tps65912
alias:          spi:tps65912

Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agodrivers: thermal: tsens: Don't print error message on -EPROBE_DEFER
Amit Kucheria [Wed, 20 Mar 2019 13:17:52 +0000 (18:47 +0530)]
drivers: thermal: tsens: Don't print error message on -EPROBE_DEFER

[ Upstream commit fc7d18cf6a923cde7f5e7ba2c1105bb106d3e29a ]

We print a calibration failure message on -EPROBE_DEFER from
nvmem/qfprom as follows:
[    3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4
[    3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed
[    3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4

This confuses people when, in fact, calibration succeeds later when
nvmem/qfprom device is available. Don't print this message on a
-EPROBE_DEFER.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agothermal: rcar_gen3_thermal: disable interrupt in .remove
Jiada Wang [Wed, 24 Apr 2019 05:11:45 +0000 (14:11 +0900)]
thermal: rcar_gen3_thermal: disable interrupt in .remove

[ Upstream commit 63f55fcea50c25ae5ad45af92d08dae3b84534c2 ]

Currently IRQ remains enabled after .remove, later if device is probed,
IRQ is requested before .thermal_init, this may cause IRQ function be
called before device is initialized.

this patch disables interrupt in .remove, to ensure irq function
only be called after device is fully initialized.

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agokernel/sys.c: prctl: fix false positive in validate_prctl_map()
Cyrill Gorcunov [Tue, 14 May 2019 00:15:40 +0000 (17:15 -0700)]
kernel/sys.c: prctl: fix false positive in validate_prctl_map()

[ Upstream commit a9e73998f9d705c94a8dca9687633adc0f24a19a ]

While validating new map we require the @start_data to be strictly less
than @end_data, which is fine for regular applications (this is why this
nit didn't trigger for that long).  These members are set from executable
loaders such as elf handers, still it is pretty valid to have a loadable
data section with zero size in file, in such case the start_data is equal
to end_data once kernel loader finishes.

As a result when we're trying to restore such programs the procedure fails
and the kernel returns -EINVAL.  From the image dump of a program:

 | "mm_start_code": "0x400000",
 | "mm_end_code": "0x8f5fb4",
 | "mm_start_data": "0xf1bfb0",
 | "mm_end_data": "0xf1bfb0",

Thus we need to change validate_prctl_map from strictly less to less or
equal operator use.

Link: http://lkml.kernel.org/r/20190408143554.GY1421@uranus.lan
Fixes: f606b77f1a9e3 ("prctl: PR_SET_MM -- introduce PR_SET_MM_MAP operation")
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Andrey Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomm/slab.c: fix an infinite loop in leaks_show()
Qian Cai [Tue, 14 May 2019 00:16:31 +0000 (17:16 -0700)]
mm/slab.c: fix an infinite loop in leaks_show()

[ Upstream commit 745e10146c31b1c6ed3326286704ae251b17f663 ]

"cat /proc/slab_allocators" could hang forever on SMP machines with
kmemleak or object debugging enabled due to other CPUs running do_drain()
will keep making kmemleak_object or debug_objects_cache dirty and unable
to escape the first loop in leaks_show(),

do {
set_store_user_clean(cachep);
drain_cpu_caches(cachep);
...

} while (!is_store_user_clean(cachep));

For example,

do_drain
  slabs_destroy
    slab_destroy
      kmem_cache_free
        __cache_free
          ___cache_free
            kmemleak_free_recursive
              delete_object_full
                __delete_object
                  put_object
                    free_object_rcu
                      kmem_cache_free
                        cache_free_debugcheck --> dirty kmemleak_object

One approach is to check cachep->name and skip both kmemleak_object and
debug_objects_cache in leaks_show().  The other is to set store_user_clean
after drain_cpu_caches() which leaves a small window between
drain_cpu_caches() and set_store_user_clean() where per-CPU caches could
be dirty again lead to slightly wrong information has been stored but
could also speed up things significantly which sounds like a good
compromise.  For example,

 # cat /proc/slab_allocators
 0m42.778s # 1st approach
 0m0.737s  # 2nd approach

[akpm@linux-foundation.org: tweak comment]
Link: http://lkml.kernel.org/r/20190411032635.10325-1-cai@lca.pw
Fixes: d31676dfde25 ("mm/slab: alternative implementation for DEBUG_SLAB_LEAK")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomm/cma_debug.c: fix the break condition in cma_maxchunk_get()
Yue Hu [Tue, 14 May 2019 00:16:37 +0000 (17:16 -0700)]
mm/cma_debug.c: fix the break condition in cma_maxchunk_get()

[ Upstream commit f0fd50504a54f5548eb666dc16ddf8394e44e4b7 ]

If not find zero bit in find_next_zero_bit(), it will return the size
parameter passed in, so the start bit should be compared with bitmap_maxno
rather than cma->count.  Although getting maxchunk is working fine due to
zero value of order_per_bit currently, the operation will be stuck if
order_per_bit is set as non-zero.

Link: http://lkml.kernel.org/r/20190319092734.276-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Safonov <d.safonov@partner.samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomm: page_mkclean vs MADV_DONTNEED race
Aneesh Kumar K.V [Tue, 14 May 2019 00:19:11 +0000 (17:19 -0700)]
mm: page_mkclean vs MADV_DONTNEED race

[ Upstream commit 024eee0e83f0df52317be607ca521e0fc572aa07 ]

MADV_DONTNEED is handled with mmap_sem taken in read mode.  We call
page_mkclean without holding mmap_sem.

MADV_DONTNEED implies that pages in the region are unmapped and subsequent
access to the pages in that range is handled as a new page fault.  This
implies that if we don't have parallel access to the region when
MADV_DONTNEED is run we expect those range to be unallocated.

w.r.t page_mkclean() we need to make sure that we don't break the
MADV_DONTNEED semantics.  MADV_DONTNEED check for pmd_none without holding
pmd_lock.  This implies we skip the pmd if we temporarily mark pmd none.
Avoid doing that while marking the page clean.

Keep the sequence same for dax too even though we don't support
MADV_DONTNEED for dax mapping

The bug was noticed by code review and I didn't observe any failures w.r.t
test run.  This is similar to

commit 58ceeb6bec86d9140f9d91d71a710e963523d063
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date:   Thu Apr 13 14:56:26 2017 -0700

    thp: fix MADV_DONTNEED vs. MADV_FREE race

commit ced108037c2aa542b3ed8b7afd1576064ad1362a
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date:   Thu Apr 13 14:56:20 2017 -0700

    thp: fix MADV_DONTNEED vs. numa balancing race

Link: http://lkml.kernel.org/r/20190321040610.14226-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc:"Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomm/cma.c: fix the bitmap status to show failed allocation reason
Yue Hu [Tue, 14 May 2019 00:17:41 +0000 (17:17 -0700)]
mm/cma.c: fix the bitmap status to show failed allocation reason

[ Upstream commit 2b59e01a3aa665f751d1410b99fae9336bd424e1 ]

Currently one bit in cma bitmap represents number of pages rather than
one page, cma->count means cma size in pages. So to find available pages
via find_next_zero_bit()/find_next_bit() we should use cma size not in
pages but in bits although current free pages number is correct due to
zero value of order_per_bit. Once order_per_bit is changed the bitmap
status will be incorrect.

The size input in cma_debug_show_areas() is not correct.  It will
affect the available pages at some position to debug the failure issue.

This is an example with order_per_bit = 1

Before this change:
[    4.120060] cma: number of available pages: 1@93+4@108+7@121+7@137+7@153+7@169+7@185+7@201+3@213+3@221+3@229+3@237+3@245+3@253+3@261+3@269+3@277+3@285+3@293+3@301+3@309+3@317+3@325+19@333+15@369+512@512=> 638 free of 1024 total pages

After this change:
[    4.143234] cma: number of available pages: 2@93+8@108+14@121+14@137+14@153+14@169+14@185+14@201+6@213+6@221+6@229+6@237+6@245+6@253+6@261+6@269+6@277+6@285+6@293+6@301+6@309+6@317+6@325+38@333+30@369=> 252 free of 1024 total pages

Obviously the bitmap status before is incorrect.

Link: http://lkml.kernel.org/r/20190320060829.9144-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoinitramfs: free initrd memory if opening /initrd.image fails
Christoph Hellwig [Tue, 14 May 2019 00:18:17 +0000 (17:18 -0700)]
initramfs: free initrd memory if opening /initrd.image fails

[ Upstream commit 54c7a8916a887f357088f99e9c3a7720cd57d2c8 ]

Patch series "initramfs tidyups".

I've spent some time chasing down behavior in initramfs and found
plenty of opportunity to improve the code.  A first stab on that is
contained in this series.

This patch (of 7):

We free the initrd memory for all successful or error cases except for the
case where opening /initrd.image fails, which looks like an oversight.

Steven said:

: This also changes the behaviour when CONFIG_INITRAMFS_FORCE is enabled
: - specifically it means that the initrd is freed (previously it was
: ignored and never freed).  But that seems like reasonable behaviour and
: the previous behaviour looks like another oversight.

Link: http://lkml.kernel.org/r/20190213174621.29297-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomm/cma.c: fix crash on CMA allocation if bitmap allocation fails
Yue Hu [Tue, 14 May 2019 00:18:14 +0000 (17:18 -0700)]
mm/cma.c: fix crash on CMA allocation if bitmap allocation fails

[ Upstream commit 1df3a339074e31db95c4790ea9236874b13ccd87 ]

f022d8cb7ec7 ("mm: cma: Don't crash on allocation if CMA area can't be
activated") fixes the crash issue when activation fails via setting
cma->count as 0, same logic exists if bitmap allocation fails.

Link: http://lkml.kernel.org/r/20190325081309.6004-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomem-hotplug: fix node spanned pages when we have a node with only ZONE_MOVABLE
Linxu Fang [Tue, 14 May 2019 00:19:17 +0000 (17:19 -0700)]
mem-hotplug: fix node spanned pages when we have a node with only ZONE_MOVABLE

[ Upstream commit 299c83dce9ea3a79bb4b5511d2cb996b6b8e5111 ]

342332e6a925 ("mm/page_alloc.c: introduce kernelcore=mirror option") and
later patches rewrote the calculation of node spanned pages.

e506b99696a2 ("mem-hotplug: fix node spanned pages when we have a movable
node"), but the current code still has problems,

When we have a node with only zone_movable and the node id is not zero,
the size of node spanned pages is double added.

That's because we have an empty normal zone, and zone_start_pfn or
zone_end_pfn is not between arch_zone_lowest_possible_pfn and
arch_zone_highest_possible_pfn, so we need to use clamp to constrain the
range just like the commit <96e907d13602> (bootmem: Reimplement
__absent_pages_in_range() using for_each_mem_pfn_range()).

e.g.
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000023fffffff]
Movable zone start for each node
  Node 0: 0x0000000100000000
  Node 1: 0x0000000140000000
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000bffdffff]
  node   0: [mem 0x0000000100000000-0x000000013fffffff]
  node   1: [mem 0x0000000140000000-0x000000023fffffff]

node 0 DMA spanned:0xfff   present:0xf9e   absent:0x61
node 0 DMA32 spanned:0xff000 present:0xbefe0 absent:0x40020
node 0 Normal spanned:0 present:0 absent:0
node 0 Movable spanned:0x40000 present:0x40000 absent:0
On node 0 totalpages(node_present_pages): 1048446
node_spanned_pages:1310719
node 1 DMA spanned:0     present:0 absent:0
node 1 DMA32 spanned:0     present:0 absent:0
node 1 Normal spanned:0x100000    present:0x100000 absent:0
node 1 Movable spanned:0x100000    present:0x100000 absent:0
On node 1 totalpages(node_present_pages): 2097152
node_spanned_pages:2097152
Memory: 6967796K/12582392K available (16388K kernel code, 3686K rwdata,
4468K rodata, 2160K init, 10444K bss, 5614596K reserved, 0K
cma-reserved)

It shows that the current memory of node 1 is double added.
After this patch, the problem is fixed.

node 0 DMA spanned:0xfff   present:0xf9e   absent:0x61
node 0 DMA32 spanned:0xff000 present:0xbefe0 absent:0x40020
node 0 Normal spanned:0 present:0 absent:0
node 0 Movable spanned:0x40000 present:0x40000 absent:0
On node 0 totalpages(node_present_pages): 1048446
node_spanned_pages:1310719
node 1 DMA spanned:0     present:0 absent:0
node 1 DMA32 spanned:0     present:0 absent:0
node 1 Normal spanned:0     present:0 absent:0
node 1 Movable spanned:0x100000    present:0x100000 absent:0
On node 1 totalpages(node_present_pages): 1048576
node_spanned_pages:1048576
memory: 6967796K/8388088K available (16388K kernel code, 3686K rwdata,
4468K rodata, 2160K init, 10444K bss, 1420292K reserved, 0K
cma-reserved)

Link: http://lkml.kernel.org/r/1554178276-10372-1-git-send-email-fanglinxu@huawei.com
Signed-off-by: Linxu Fang <fanglinxu@huawei.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agohugetlbfs: on restore reserve error path retain subpool reservation
Mike Kravetz [Tue, 14 May 2019 00:19:38 +0000 (17:19 -0700)]
hugetlbfs: on restore reserve error path retain subpool reservation

[ Upstream commit 0919e1b69ab459e06df45d3ba6658d281962db80 ]

When a huge page is allocated, PagePrivate() is set if the allocation
consumed a reservation.  When freeing a huge page, PagePrivate is checked.
If set, it indicates the reservation should be restored.  PagePrivate
being set at free huge page time mostly happens on error paths.

When huge page reservations are created, a check is made to determine if
the mapping is associated with an explicitly mounted filesystem.  If so,
pages are also reserved within the filesystem.  The default action when
freeing a huge page is to decrement the usage count in any associated
explicitly mounted filesystem.  However, if the reservation is to be
restored the reservation/use count within the filesystem should not be
decrementd.  Otherwise, a subsequent page allocation and free for the same
mapping location will cause the file filesystem usage to go 'negative'.

Filesystem                         Size  Used Avail Use% Mounted on
nodev                              4.0G -4.0M  4.1G    - /opt/hugepool

To fix, when freeing a huge page do not adjust filesystem usage if
PagePrivate() is set to indicate the reservation should be restored.

I did not cc stable as the problem has been around since reserves were
added to hugetlbfs and nobody has noticed.

Link: http://lkml.kernel.org/r/20190328234704.27083-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomm/hmm: select mmu notifier when selecting HMM
Jérôme Glisse [Tue, 14 May 2019 00:19:45 +0000 (17:19 -0700)]
mm/hmm: select mmu notifier when selecting HMM

[ Upstream commit 734fb89968900b5c5f8edd5038bd4cdeab8c61d2 ]

To avoid random config build issue, select mmu notifier when HMM is
selected.  In any cases when HMM get selected it will be by users that
will also wants the mmu notifier.

Link: http://lkml.kernel.org/r/20190403193318.16478-2-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoARM: prevent tracing IPI_CPU_BACKTRACE
Arnd Bergmann [Tue, 14 May 2019 22:41:48 +0000 (15:41 -0700)]
ARM: prevent tracing IPI_CPU_BACKTRACE

[ Upstream commit be167862ae7dd85c56d385209a4890678e1b0488 ]

Patch series "compiler: allow all arches to enable
CONFIG_OPTIMIZE_INLINING", v3.

This patch (of 11):

When function tracing for IPIs is enabled, we get a warning for an
overflow of the ipi_types array with the IPI_CPU_BACKTRACE type as
triggered by raise_nmi():

  arch/arm/kernel/smp.c: In function 'raise_nmi':
  arch/arm/kernel/smp.c:489:2: error: array subscript is above array bounds [-Werror=array-bounds]
    trace_ipi_raise(target, ipi_types[ipinr]);

This is a correct warning as we actually overflow the array here.

This patch raise_nmi() to call __smp_cross_call() instead of
smp_cross_call(), to avoid calling into ftrace.  For clarification, I'm
also adding a two new code comments describing how this one is special.

The warning appears to have shown up after commit e7273ff49acf ("ARM:
8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI"), which changed the
number assignment from '15' to '8', but as far as I can tell has existed
since the IPI tracepoints were first introduced.  If we decide to
backport this patch to stable kernels, we probably need to backport
e7273ff49acf as well.

[yamada.masahiro@socionext.com: rebase on v5.1-rc1]
Link: http://lkml.kernel.org/r/20190423034959.13525-2-yamada.masahiro@socionext.com
Fixes: e7273ff49acf ("ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI")
Fixes: 365ec7b17327 ("ARM: add IPI tracepoints") # v3.17
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Borislav Petkov <bp@suse.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agodrm/pl111: Initialize clock spinlock early
Guenter Roeck [Mon, 13 May 2019 14:46:21 +0000 (07:46 -0700)]
drm/pl111: Initialize clock spinlock early

[ Upstream commit 3e01ae2612bdd7975c74ec7123d7f8f5e6eed795 ]

The following warning is seen on systems with broken clock divider.

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 1 Comm: swapper Not tainted 5.1.0-09698-g1fb3b52 #1
Hardware name: ARM Integrator/CP (Device Tree)
[<c0011be8>] (unwind_backtrace) from [<c000ebb8>] (show_stack+0x10/0x18)
[<c000ebb8>] (show_stack) from [<c07d3fd0>] (dump_stack+0x18/0x24)
[<c07d3fd0>] (dump_stack) from [<c0060d48>] (register_lock_class+0x674/0x6f8)
[<c0060d48>] (register_lock_class) from [<c005de2c>]
(__lock_acquire+0x68/0x2128)
[<c005de2c>] (__lock_acquire) from [<c0060408>] (lock_acquire+0x110/0x21c)
[<c0060408>] (lock_acquire) from [<c07f755c>] (_raw_spin_lock+0x34/0x48)
[<c07f755c>] (_raw_spin_lock) from [<c0536c8c>]
(pl111_display_enable+0xf8/0x5fc)
[<c0536c8c>] (pl111_display_enable) from [<c0502f54>]
(drm_atomic_helper_commit_modeset_enables+0x1ec/0x244)

Since commit eedd6033b4c8 ("drm/pl111: Support variants with broken clock
divider"), the spinlock is not initialized if the clock divider is broken.
Initialize it earlier to fix the problem.

Fixes: eedd6033b4c8 ("drm/pl111: Support variants with broken clock divider")
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1557758781-23586-1-git-send-email-linux@roeck-us.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoipc: prevent lockup on alloc_msg and free_msg
Li Rongqing [Tue, 14 May 2019 22:46:20 +0000 (15:46 -0700)]
ipc: prevent lockup on alloc_msg and free_msg

[ Upstream commit d6a2946a88f524a47cc9b79279667137899db807 ]

msgctl10 of ltp triggers the following lockup When CONFIG_KASAN is
enabled on large memory SMP systems, the pages initialization can take a
long time, if msgctl10 requests a huge block memory, and it will block
rcu scheduler, so release cpu actively.

After adding schedule() in free_msg, free_msg can not be called when
holding spinlock, so adding msg to a tmp list, and free it out of
spinlock

  rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
  rcu:     Tasks blocked on level-1 rcu_node (CPUs 16-31): P32505
  rcu:     Tasks blocked on level-1 rcu_node (CPUs 48-63): P34978
  rcu:     (detected by 11, t=35024 jiffies, g=44237529, q=16542267)
  msgctl10        R  running task    21608 32505   2794 0x00000082
  Call Trace:
   preempt_schedule_irq+0x4c/0xb0
   retint_kernel+0x1b/0x2d
  RIP: 0010:__is_insn_slot_addr+0xfb/0x250
  Code: 82 1d 00 48 8b 9b 90 00 00 00 4c 89 f7 49 c1 ee 03 e8 59 83 1d 00 48 b8 00 00 00 00 00 fc ff df 4c 39 eb 48 89 9d 58 ff ff ff <41> c6 04 06 f8 74 66 4c 8d 75 98 4c 89 f1 48 c1 e9 03 48 01 c8 48
  RSP: 0018:ffff88bce041f758 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
  RAX: dffffc0000000000 RBX: ffffffff8471bc50 RCX: ffffffff828a2a57
  RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: ffff88bce041f780
  RBP: ffff88bce041f828 R08: ffffed15f3f4c5b3 R09: ffffed15f3f4c5b3
  R10: 0000000000000001 R11: ffffed15f3f4c5b2 R12: 000000318aee9b73
  R13: ffffffff8471bc50 R14: 1ffff1179c083ef0 R15: 1ffff1179c083eec
   kernel_text_address+0xc1/0x100
   __kernel_text_address+0xe/0x30
   unwind_get_return_address+0x2f/0x50
   __save_stack_trace+0x92/0x100
   create_object+0x380/0x650
   __kmalloc+0x14c/0x2b0
   load_msg+0x38/0x1a0
   do_msgsnd+0x19e/0xcf0
   do_syscall_64+0x117/0x400
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

  rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
  rcu:     Tasks blocked on level-1 rcu_node (CPUs 0-15): P32170
  rcu:     (detected by 14, t=35016 jiffies, g=44237525, q=12423063)
  msgctl10        R  running task    21608 32170  32155 0x00000082
  Call Trace:
   preempt_schedule_irq+0x4c/0xb0
   retint_kernel+0x1b/0x2d
  RIP: 0010:lock_acquire+0x4d/0x340
  Code: 48 81 ec c0 00 00 00 45 89 c6 4d 89 cf 48 8d 6c 24 20 48 89 3c 24 48 8d bb e4 0c 00 00 89 74 24 0c 48 c7 44 24 20 b3 8a b5 41 <48> c1 ed 03 48 c7 44 24 28 b4 25 18 84 48 c7 44 24 30 d0 54 7a 82
  RSP: 0018:ffff88af83417738 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
  RAX: dffffc0000000000 RBX: ffff88bd335f3080 RCX: 0000000000000002
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88bd335f3d64
  RBP: ffff88af83417758 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000001 R11: ffffed13f3f745b2 R12: 0000000000000000
  R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000000
   is_bpf_text_address+0x32/0xe0
   kernel_text_address+0xec/0x100
   __kernel_text_address+0xe/0x30
   unwind_get_return_address+0x2f/0x50
   __save_stack_trace+0x92/0x100
   save_stack+0x32/0xb0
   __kasan_slab_free+0x130/0x180
   kfree+0xfa/0x2d0
   free_msg+0x24/0x50
   do_msgrcv+0x508/0xe60
   do_syscall_64+0x117/0x400
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Davidlohr said:
 "So after releasing the lock, the msg rbtree/list is empty and new
  calls will not see those in the newly populated tmp_msg list, and
  therefore they cannot access the delayed msg freeing pointers, which
  is good. Also the fact that the node_cache is now freed before the
  actual messages seems to be harmless as this is wanted for
  msg_insert() avoiding GFP_ATOMIC allocations, and after releasing the
  info->lock the thing is freed anyway so it should not change things"

Link: http://lkml.kernel.org/r/1552029161-4957-1-git-send-email-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agosysctl: return -EINVAL if val violates minmax
Christian Brauner [Tue, 14 May 2019 22:44:55 +0000 (15:44 -0700)]
sysctl: return -EINVAL if val violates minmax

[ Upstream commit e260ad01f0aa9e96b5386d5cd7184afd949dc457 ]

Currently when userspace gives us a values that overflow e.g.  file-max
and other callers of __do_proc_doulongvec_minmax() we simply ignore the
new value and leave the current value untouched.

This can be problematic as it gives the illusion that the limit has
indeed be bumped when in fact it failed.  This commit makes sure to
return EINVAL when an overflow is detected.  Please note that this is a
userspace facing change.

Link: http://lkml.kernel.org/r/20190210203943.8227-4-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agofs/fat/file.c: issue flush after the writeback of FAT
Hou Tao [Tue, 14 May 2019 22:44:32 +0000 (15:44 -0700)]
fs/fat/file.c: issue flush after the writeback of FAT

[ Upstream commit bd8309de0d60838eef6fb575b0c4c7e95841cf73 ]

fsync() needs to make sure the data & meta-data of file are persistent
after the return of fsync(), even when a power-failure occurs later.  In
the case of fat-fs, the FAT belongs to the meta-data of file, so we need
to issue a flush after the writeback of FAT instead before.

Also bail out early when any stage of fsync fails.

Link: http://lkml.kernel.org/r/20190409030158.136316-1-houtao1@huawei.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agorapidio: fix a NULL pointer dereference when create_workqueue() fails
Kangjie Lu [Tue, 14 May 2019 22:44:49 +0000 (15:44 -0700)]
rapidio: fix a NULL pointer dereference when create_workqueue() fails

[ Upstream commit 23015b22e47c5409620b1726a677d69e5cd032ba ]

In case create_workqueue fails, the fix releases resources and returns
-ENOMEM to avoid NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>