Merge remote-tracking branch 'scsi-queue/drivers-for-3.16' into for-linus

include/scsi/osd_protocol.h: remove unnecessary __constant

__constant_cpu_to_be16 converted to cpu_to_be16

This patch fixes checkpatch warnings:

"WARNING: __constant_cpu_to_be16 should be cpu_to_be16"

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Ack-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

mvsas: Recognise device/subsystem 9485/9485 as 88SE9485

Matt Taggart reported that mvsas didn't bind to the Marvell
SAS controller on a Supermicro AOC-SAS2LP-MV8 board.

lspci reports it as:

01:00.0 RAID bus controller [0104]: Marvell Technology Group Ltd. Device [1b4b:9485] (rev 03)
        Subsystem: Marvell Technology Group Ltd. Device [1b4b:9485]
[...]

Add it to the device table as chip_9485.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reported-by: Matt Taggart <taggart@debian.org>
Tested-by: Matt Taggart <taggart@debian.org>
Acked-By: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Revert "be2iscsi: Fix processing cqe for cxn whose endpoint is freed"

This reverts commit 11206081ad895d83e717bfe23603168dc307d904.

Based on comments from Mike Christie and Sony John-N.

mptfusion: fix msgContext in mptctl_hp_hostinfo

Hi,

without this patch the istwiRWRequest->MsgContext is always set to zero,
this patch saves the MsgContext in a msgcontext variable and then restores
the value.
Thanks to  David Jeffery who found the issue and did the analysis.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Desai, Kashyap <Kashyap.Desai@lsi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

acornscsi: remove linked command support

The acornscsi driver was added in v2.1.88. It has always #undef-ed
CONFIG_SCSI_ACORNSCSI_LINK near the top of acornscsi.c. And, just to be
sure, it has also always triggered a preprocessor error if
CONFIG_SCSI_ACORNSCSI_LINK was still defined. But, as far as I can see,
it has never even been possible to set SCSI_ACORNSCSI_LINK through
kconfig, or its predecessors, in the first place.

Let's remove the code involved.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi/NCR5380: dprintk macro

This is the delta between the two submissions:
[PATCH 00/12] scsi/NCR5380: fix debugging macros and #include structure
and
[PATCH v2 00/12] scsi/NCR5380: fix debugging macros and #include structure

The macro definition changes were discussed on the mailing list during
review. The idea is to get the compiler to check the parameters of
disabled printk() calls so that the debugging code doesn't rot again.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>

fusion: Remove use of DEF_SCSI_QCMD

Removing the host_lock from the I/O submission path gives a huge
scalability improvement.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Praveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: Sreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

fusion: Add free msg frames to the head, not tail of list

Reusing a msg frame quickly means it's still cache-hot.  This yields
a small but noticable performance improvement in a well-known database
benchmark.  This improvement is already present in the mpt3sas driver.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Praveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: Sreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

mpt2sas: Add free smids to the head, not tail of list

Reusing a smid quickly means it's still cache-hot.  This yields a small
but noticable performance improvement in a well-known database benchmark.
This improvement is already present in the mpt3sas driver.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Praveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: Sreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

mpt2sas: Remove use of DEF_SCSI_QCMD

Removing the host_lock from the I/O submission path gives a huge
scalability improvement.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Praveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: Sreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

mpt2sas: Remove uses of serial_number

The mpt2sas_scsih_issue_tm() function does not use the 'serial_number'
argument passed to it.  Removing it removes the last vestiges of the
scsi_cmnd's serial_number field from this driver.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Praveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: Sreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

mpt3sas: Remove use of DEF_SCSI_QCMD

Removing the host_lock from the I/O submission path gives a huge
scalability improvement.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Praveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: Sreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

mpt3sas: Remove uses of serial_number

The mpt3sas_scsih_issue_tm() function does not use the 'serial_number'
argument passed to it.  Removing it removes the last vestiges of the
scsi_cmnd's serial_number field from this driver.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Praveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: Sreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: Use kmemdup instead of kmalloc + memcpy

This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/memdup.cocci

Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Acked-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Use kmemdup instead of kmalloc + memcpy

This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/memdup.cocci

Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: fix incorrect debug printk

There are missing curly braces here so it prints that the recovery
failed even when it succeeded.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Acked-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

be2iscsi: Bump the driver version

 Bumping the driver version.

Signed-off-by: John Soni Jose <sony.john-n@emulex.com>
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

be2iscsi: Fix processing cqe for cxn whose endpoint is freed

 During heavy IO in multipath environment with many active sessions
 and port-bouncing happening, there is a race condition because of
 which beiscsi_prcess_cqe() gets called for a connection whose
 endpoint is freed.

 Checking endpoint reference for a connection before processing in
 beiscsi_process_cq().

Signed-off-by: Minh Tran <minhduc.tran@emulex.com>
Signed-off-by: John Soni Jose <sony.john-n@emulex.com>
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

be2iscsi: Fix destroy MCC-CQ before MCC-EQ is destroyed

 EQ teardown should happen only after all CQ are destroyed.
 In some FW config, adapter goes into a freeze state. This
 fix moves teardown of MCC-Q before the EQ teardown happens.

Signed-off-by: John Soni Jose <sony.john-n@emulex.com>
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

be2iscsi: Fix memory corruption in MBX path

 From: Dan Carpenter [mailto:dan.carpenter@oracle.com]
 Sent: Friday, March 28, 2014 1:42 AM
 Subject: re: [SCSI] be2iscsi: Fix handling timed out MBX completion from FW

 Hello Jayamohan Kallickal,

 The patch 1957aa7f6246: "[SCSI] be2iscsi: Fix handling timed out MBX completion from FW" from Jan 29, 2014, leads to the following static checker warning:

 drivers/scsi/be2iscsi/be_main.c:5581 beiscsi_dev_probe()
 error: memset() '&phba->ctrl.ptag_state[i]->tag_mem_state' too small (24 vs 32)

 drivers/scsi/be2iscsi/be_main.c
 5576          for (i = 0; i < MAX_MCC_CMD; i++) {
 5577                  init_waitqueue_head(&phba->ctrl.mcc_wait[i + 1]);
 5578                  phba->ctrl.mcc_tag[i] = i + 1;
 5579                  phba->ctrl.mcc_numtag[i + 1] = 0;
 5580                  phba->ctrl.mcc_tag_available++;
 5581                  memset(&phba->ctrl.ptag_state[i].tag_mem_state, 0,
 5582                         sizeof(struct beiscsi_mcc_tag_state));
                               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Probably this this be change to sizeof(struct be_dma_mem struct)?  It looks like we are corrupting memory a bit here.

 5583          }

 regards,
 dan carpenter

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John Soni Jose <sony.john-n@emulex.com>
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

be2iscsi: Fix TCP parameters while connection offloading.

 SKH-R adapter, TCP Window Size/Scale parameters are passed
 in TCP Connection Offload Mbx Command.

Signed-off-by: Minh Tran <minhduc.tran@emulex.com>
Signed-off-by: John Soni Jose <sony.john-n@emulex.com>
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

be2iscsi: Fix interrupt Coalescing mechanism.

Signed-off-by: Minh Tran <minhduc.tran@emulex.com>
Signed-off-by: John Soni Jose <sony.john-n@emulex.com>
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

be2iscsi: Fix exposing Host in sysfs after adapter initialization is complete

 Before probe for function was completed, iSCSI Daemon had initiated login
 to target while OS was coming up. The targets which had node.startup=automatic,
 login process was initiated.Since function specific initialization was still in
 progress this lead to kernel panic.

 Fixed the issue by moving iscsi_host_add() call after adapter initialization
 is done.

Signed-off-by: John Soni Jose <sony.john-n@emulex.com>
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

be2iscsi: Fix retrieving MCCQ_WRB in non-embedded Mbox path

 Getting WRB for MCCQ posting was done before looking if tag is
 available or not. This lead to increase phba->ctrl.mcc_obj.q.used
 variable and the WARN_ON message was coming from wrb_from_mccq().
 Moved getting wrb from mccq after checking for the tag.

 In wrb_from_mccq(), memset is done before returning wrb ptr.
 Removed memset of mccq wrb from all other functions.

Signed-off-by: John Soni Jose <sony.john-n@emulex.com>
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi: ufs: Improve UFS fatal error handling

Error handling in UFS driver is broken and resets the host controller
for fatal errors without re-initialization. Correct the fatal error
handling sequence according to UFS Host Controller Interface (HCI)
v1.1 specification.

o Processed requests which are completed w/wo error are reported to
  SCSI layer and any pending commands that are not started are aborted
  in the controller and re-queued into scsi mid-layer queue.

o Upon determining fatal error condition the host controller may hang
  forever until a reset is applied. Block SCSI layer for sending new
  requests and apply reset in a separate error handling work.

o SCSI is informed about the expected Unit-Attention exception from the
  device for the immediate command after a reset so that the SCSI layer
  take necessary steps to establish communication with the device.

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Reviewed-by: Yaniv Gardi <ygardi@codeaurora.org>
Tested-by: Dolev Raviv <draviv@codeaurora.org>
Acked-by: Vinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi: ufs: Fix device and host reset methods

As of now SCSI initiated error handling is broken because,
the reset APIs don't try to bring back the device initialized and
ready for further transfers.

In case of timeouts, the scsi error handler takes care of handling aborts
and resets. Improve the error handling in such scenario by resetting the
device and host and re-initializing them in proper manner.

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Reviewed-by: Yaniv Gardi <ygardi@codeaurora.org>
Tested-by: Dolev Raviv <draviv@codeaurora.org>
Acked-by: Vinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi: ufs: Fix hardware race conditions while aborting a command

There is a possible race condition in the hardware when the abort
command is issued to terminate the ongoing SCSI command as described
below:

- A bit in the door-bell register is set in the controller for a
  new SCSI command.
- In some rare situations, before controller get a chance to issue
  the command to the device, the software issued an abort command.
- If the device recieves abort command first then it returns success
  because the command itself is not present.
- Now if the controller commits the command to device it will be
  processed.
- Software thinks that command is aborted and proceed while still
  the device is processing it.
- The software, controller and device may go out of sync because of
  this race condition.

To avoid this, query task presence in the device before sending abort
task command so that after the abort operation, the command is guaranteed
to be non-existent in both controller and the device.

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Reviewed-by: Yaniv Gardi <ygardi@codeaurora.org>
Tested-by: Dolev Raviv <draviv@codeaurora.org>
Acked-by: Vinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi: ufs: Fix broken task management command implementation

Currently, sending Task Management (TM) command to the card might
be broken in some scenarios as listed below:

Problem: If there are more than 8 TM commands the implementation
         returns error to the caller.
Fix:     Wait for one of the slots to be emptied and send the command.

Problem: Sometimes it is necessary for the caller to know the TM service
         response code to determine the task status.
Fix:     Propogate the service response to the caller.

Problem: If the TM command times out no proper error recovery is
         implemented.
Fix:     Clear the command in the controller door-bell register, so that
         further commands for the same slot don't fail.

Problem: While preparing the TM command descriptor, the task tag used
         should be unique across SCSI/NOP/QUERY/TM commands and not the
 task tag of the command which the TM command is trying to manage.
Fix:     Use a unique task tag instead of task tag of SCSI command.

Problem: Since the TM command involves H/W communication, abruptly ending
         the request on kill interrupt signal might cause h/w malfunction.
Fix:     Wait for hardware completion interrupt with TASK_UNINTERRUPTIBLE
         set.

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Reviewed-by: Yaniv Gardi <ygardi@codeaurora.org>
Tested-by: Dolev Raviv <draviv@codeaurora.org>
Acked-by: Vinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi: ufs: make undeclared functions static

Make undeclared functions static and declare exported symbols
to suppress warnings from sparse tool.

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Acked-by: Vinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi: ufs: fix endianness sparse warnings

Fix many warnings with incorrect endian assumptions
which makes the code unportable to new architectures.

The UFS specification defines the byte order as big-endian
for UPIU structure and little-endian for the host controller
transfer/task management descriptors.

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Acked-by: Vinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

hpsa: fix bad comparison of signed with unsigned in hpsa_update_scsi_devices

rescan_hba_mode was defined as a u8 so could never be less than zero:

        rescan_hba_mode = hpsa_hba_mode_enabled(h);
        if (rescan_hba_mode < 0)
                goto out;

Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi/NCR5380: merge sun3_scsi_vme.c into sun3_scsi.c

The sun3 drivers suffer from a whole bunch of duplicated code. Fix this
by following the g_NCR5380_mmio example. (Notionally, sun3_scsi relates to
sun3_scsi_vme in the same way that g_NCR5380 relates to g_NCR5380_mmio.)

Dead code is also removed: we now have working debug macros so
SUN3_SCSI_DEBUG is undesirable. Dead code within #ifdef OLD_DMA is also
dropped, consistent with sun3_scsi_vme.c.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Sam Creasey <sammy@sammy.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi/NCR5380: reduce depth of sun3_scsi nested includes

Move the #include "NCR5380.h" out of the sun3_scsi.h header file and into
the driver .c files, like all the other NCR5380 drivers in the tree.

This improves uniformity and reduces the depth of nested includes. The
sequence of #include's, #define's and #if's no longer does my head in.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Sam Creasey <sammy@sammy.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi/NCR5380: remove unused macro definitions

Remove the unused (and divergent) debugging macro definitions from
the sun3_NCR5380 and atari_NCR5380 drivers. These drivers have been
converted to use the common macros in NCR5380.h.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Sam Creasey <sammy@sammy.net>
Acked-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi/NCR5380: fix and standardize NDEBUG macros

All three NCR5380 core driver implementations share the same NCR5380.h
header file so they need to agree on certain macro definitions.

The flag bit used by the NDEBUG_MERGING macro in atari_NCR5380 and
sun3_NCR5380 collides with the bit used by NDEBUG_LISTS.

Moreover, NDEBUG_ABORT appears in NCR5380.c so it should be defined in
NCR5380.h rather than in each of the many drivers using that core.

An undefined NDEBUG_ABORT macro caused compiler errors and led to dodgy
workarounds in the core driver that can now be removed.
(See commits f566a576bca09de85bf477fc0ab2c8c96405b77b and
185a7a1cd79b9891e3c17abdb103ba1c98d6ca7a.)

Move all of the NDEBUG_ABORT, NDEBUG_TAGS and NDEBUG_MERGING macro
definitions into NCR5380.h where all the other NDEBUG macros live.

Also, incorrect "#ifdef NDEBUG" becomes "#if NDEBUG" to fix the warning:
drivers/scsi/mac_scsi.c: At top level:
drivers/scsi/NCR5380.c:418: warning: 'NCR5380_print' defined but not used
drivers/scsi/NCR5380.c:459: warning: 'NCR5380_print_phase' defined but not used

The debugging code is now enabled when NDEBUG != 0.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Sam Creasey <sammy@sammy.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi/NCR5380: adopt dprintk()

All NCR5380 drivers already include the NCR5380.h header. Better to
adopt those macros rather than have three variations on them.

Moreover, the macros in NCR5380.h are preferable because the atari_NCR5380
and sun3_NCR5380 versions are inflexible. For example, they can't accomodate
dprintk(NDEBUG_MAIN | NDEBUG_QUEUES, ...)

Replace the *_PRINTK macros from atari_NCR5380.h and sun3_NCR5380.h with
the equivalent macros from NCR5380.h.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Sam Creasey <sammy@sammy.net>
Acked-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi/NCR5380: adopt NCR5380_dprint() and NCR5380_dprint_phase()

All NCR5380 drivers already include the NCR5380.h header. Better to
adopt those macros rather than have three variations on them.

Moreover, the macros in NCR5380.h are preferable anyway: the atari_NCR5380
and sun3_NCR5380 versions are inflexible. For example, they can't accomodate
NCR5380_dprint(NDEBUG_MAIN | NDEBUG_QUEUES, ...)

Replace the NCR_PRINT* macros from atari_NCR5380.h and sun3_NCR5380.h with
the equivalent macros from NCR5380.h.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Sam Creasey <sammy@sammy.net>
Acked-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi/NCR5380: fix dprintk macro usage and definition

There are three implementations of the core NCR5380 driver and three sets
of debugging macro definitions. And all three implementations use the
NCR5380.h header as well.

Two of the definitions of the dprintk macro accept a variable argument list
whereas the third does not. Standardize on the variable argument list.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Sam Creasey <sammy@sammy.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi/NCR5380: fix build failures when debugging is enabled

The change from cmd->target to cmd->device->id was apparently the purpose of
commit a7f251228390e87d86c5e3846f99a455517fdd8e in
kernel/git/tglx/history.git but some instances have been missed.

Also fix the "NDEBUG_LAST_WRITE_SENT" and "NDEBUG_ALL" typo's.

Also fix some format strings (%ul becomes %lu) that caused compiler warnings.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Sam Creasey <sammy@sammy.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi/NCR5380: use NCR5380_dprint() instead of NCR5380_print()

Only the NCR5380_dprint() macro should invoke the NCR5380_print() function.
That's why NCR5380.c only defines the function #if NDEBUG. Use the standard
macro.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Sam Creasey <sammy@sammy.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi/NCR5380: remove old CVS keywords

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Sam Creasey <sammy@sammy.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi/NCR5380: remove redundant HOSTS_C macro tests

HOSTS_C is always undefined. There is no hosts.c anymore.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Sam Creasey <sammy@sammy.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi/NCR5380: remove unused BOARD_NORMAL and BOARD_NCR53C400

BOARD_NORMAL is completely unused and BOARD_NCR53C400 is used only by
g_NCR5380 internally. Remove the unused definitions.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Sam Creasey <sammy@sammy.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi_debug: simple short transfer injection

Add an option to only transfer half the data for every n-th command.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>

virtio_scsi: use cmd_size

Taken almost entirely from Nicholas Bellinger's scsi-mq conversion.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>

bnx2fc: fix memory leak in bnx2fc_allocate_hash_table()

In case of error, the bnx2fc_allocate_hash_table() didn't free
all the memory it allocated.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

bnx2fc: fix memory leak and potential NULL pointer dereference.

If bnx2fc_allocate_hash_table() for some reasons fails, it is possible that the
hash_tbl_segments or the hash_tbl_pbl pointers are NULL.
In this case bnx2fc_free_hash_table() will panic the system.

this patch also fixes a memory leak, the hash_tbl_segments pointer was never
freed.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

bnx2fc: remove unused variable hash_table_size

hash_table_size is not used by the bnx2fc_free_hash_table() function.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

hpsa: do not ignore failure of sense controller parameters command

Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

hpsa: fix memory leak in hpsa_hba_mode_enabled

And while we're at it fix a magic number

Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

hpsa: add new Smart Array PCI IDs (May 2014)

Signed-off-by: Scott Teel <scott.teel@hp.com>
Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>

hpsa: Checking for a NULL return from a kzalloc call

Checking for a NULL return from a kzalloc call in hpsa_get_pdisk_of_ioaccel2.

Signed-off-by: Scott Teel <scott.teel@hp.com>
Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

pm80xx : Fix missing NULL pointer checks and memory leaks

Checking return value for the memory allocattion and freeing it
while exiting the function

Signed-off-by: Viswas G <Viswas.G@pmcs.com>
Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Jack Wang <xjtuwjp@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

virtio_scsi: remove ACCESS_ONCE() and smp_read_barrier_depends()

Access to tgt->req_vq is strictly serialized by spin_lock
of tgt->tgt_lock, so the ACCESS_ONCE() isn't necessary.

smp_read_barrier_depends() in virtscsi_req_done was introduced
to order reading req_vq and decreasing tgt->reqs, but it isn't
needed now because req_vq is read from
scsi->req_vqs[vq->index - VIRTIO_SCSI_VQ_BASE] instead of
tgt->req_vq, so remove the unnecessary barrier.

Also remove related comment about the barrier.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

lpfc: Add iotag memory barrier

Add a memory barrier to ensure the valid bit is read before
any of the cqe payload is read. This fixes an issue seen
on Power where the cqe payload was getting loaded before
the valid bit. When this occurred, we saw an iotag out of
range error when a command completed, but since the iotag
looked invalid the command didn't get completed to scsi core.
Later we hit the command timeout, attempted to abort the command,
then waited for the aborted command to get returned. Since the
adapter already returned the command, we timeout waiting,
and end up escalating EEH all the way to host reset. This
patch fixes this issue.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Smart <james.smart@emulex.com>
 ---

 lpfc_sli.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
Signed-off-by: Christoph Hellwig <hch@lst.de>

MAINTAINERS: add an entry for all the NCR5380 drivers

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

m68k/atari - atari_scsi: change abort/reset return codes

[Resend of earlier patch - added equivalent changes to sun3 NCR5380 code]

The abort/reset lowlevel return codes had changed with the new
error SCSI handling - update Atari and Sun3 NCR5380 drivers to reflect this.

Change reset handling for Atari to clear queues only, do not attempt
to call done() on each command aborted by the reset. The EH code
should do that for us. Queues _must_ be cleared, otherwise
atari_scsi_bus_reset will not release the ST-DMA lock, deadlocking
further error recovery.

Update the Sun3 NCR5380 driver as well - the Sun3 driver was
derived from the Atari one. Kudos to Finn Thain for the Sun3 part
and cleaning up the header files. After the header cleanup, the
initio.h include (!) can be dropped from sun3_scsi.h now.

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Sam Creasey <sammy@sammy.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: James E.J. Bottomley <JBottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>

aic79xx: fix misuse of static variables

The format strings for various printk()s make use of a temporary
variable that is declared 'static'. This is probably not intended,
so fix those.

Found in the PaX patch, written by the PaX Team.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: PaX Team <pageexec@freemail.hu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

esas2r: Fix comment

Minor fix for a message in the driver so that it matches the function name.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Bradley Grove <bgrove@attotech.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

bfa: allocate memory with GFP_ATOMIC in spinlock context

bfa_fcb_pbc_vport_create() is called only from bfa_fcs_pbc_vport_init(),
that is called only from bfad_drv_start() with bfad_lock spinlock held.
So the patch replaces GFP_KERNEL with GFP_ATOMIC to avoid
sleeping in atomic spinlock context.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Update driver version to 5.04.00-k6

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Fix smatch warning in func qla4xxx_conn_get_param

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Fix smatch warning in func qla4xxx_get_ep_param

Fix following smatch warning:-
 drivers/scsi/qla4xxx/ql4_os.c:1752 qla4xxx_get_ep_param() warn: variable dereferenced before check 'qla_ep' (see line 1745)

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Fix memory leak for ha->saved_acb

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Export sysfs DDBs from DPC handler

Issue:
modprobe qla4xxx is killed by systemd due to timeout.

Solution:
The exporting of sysfs DDBs from qla4xxx_probe_adapter added delay of
approximately 15s due to which system-udevd killed the modprobe of the
driver. Added fix to export the sysfs DDBs from the DPC handler.

Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Disable INTx interrupt for ISP82XX

Signed-off-by: Tej Parkash <tej.parkash@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Update driver version to 5.04.00-k5

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Fix memory leak in func qla4_84xx_config_acb()

Use correct goto statement to free dma memory in case of
failure in function qla4_84xx_config_acb()

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Initialize hardware queue for ISP40XX

Issue:
System crash while target discovery for ISP40XX

Root cause:
Function qla4xxx_init_rings() is not called for ISP40XX

Fix:
Call function qla4xxx_init_rings() for ISP40XX from
qla4xxx_start_firmware().

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Check for correct return status

Check for correct return status in function -
qla4_8xxx_minidump_pex_dma_read

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: qla4xxx: Move qla4_8xxx_ms_mem_write_128b to ql4_nx.c

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Added PEX DMA Support for ISP8022 Adapter

Signed-off-by: Tej Parkash <tej.parkash@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Added new opcodes for 84XX Minidump template

Updated driver with new opcode (RDDFE, RDMDIO and POLLWR) which are
added with latest firmware minidump template

Signed-off-by: Tej Parkash <tej.parkash@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Add support of 0xFF capture mask for minidump

Signed-off-by: Tej Parkash <tej.parkash@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Change default capture to firmware defined capture mask

Signed-off-by: Tej Parkash <tej.parkash@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla4xxx: Do not wait for IO completion, after issuing stop_firmware

Problem:
iSCSI stop_firmware mailbox command is not completing outstanding IO.

Solution:
Do not wait for IO completion after issuing stop_firmware mailbox
command

Signed-off-by: Tej Parkash <tej.parkash@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Update Maintainers for IBM Power 842, vscsi, and vfc drivers

Update the MAINTAINERS file to indicate the current maintainers
for the IBM Power 842 Compression driver, IBM Power Virtual SCSI
driver and the IBM Power Virtual FC Driver.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Robert Jennings <rob@pochix.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

scsi/libiscsi: Fix static checker warning on bh locking

Commit 659743b "[SCSI] libiscsi: Reduce locking contention in fast path" introduced a
new smatch warning on libiscsi.c "iscsi_xmit_task() warn: inconsistent returns
bottom_half:: locked (1410 [(-61)]) unlocked (1425 [0], 1425 [s32min-(-1),1-s32max])",
which we can eliminate by using non bh locking on the nested spin_lock call.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

fnic: fnic Control Path Trace Utility

Fnic Ctlr Path Trace utility is a tracing functionality built directly into fnic
driver to trace the control path frames like discovery, FLOGI request/reply,
PLOGI request/reply, link event etc.  It will be one trace file for all fnics.
It will help us to debug and resolve the discovery and initialization related
issues in more convenient way. This trace information includes time stamp,
Host Number, Frame type, Frame Length and Frame. By default,64 pages are
allocated but we can change the number of allocated pages by module parameter
fnic_fc_trace_max_page. Each entry is of 256 byte and available entries are
depends on allocated number of pages. We can turn on or off the fnic control
path trace functionality by module paramter fc_trace_enable and/or reset the
trace contain by module paramter fc_trace_clear.

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

fnic: Failing to queue aborts due to Q full cause terminate driver timeout

In fnic abort handler, abort queuing can be failed when hardware queue is full.
The command state is left as abort queued. The command with abort queued state
will never be queued next time for abort or termiantion.
Fix restores the command state in above case.

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

fnic: NoFIP solicitation frame in NONFIP mode and changed IO Throttle count

This patch contains following three minor fixes.

1) During Probe, fnic was sending FIP solicitation in Non FIP mode which is not
   expected, setting the internal fip state to Non FIP mode explicitly, avoids
   sending FIP frame.

2) When target goes offline, all outstanding IOs belong to the target will be
   terminated by driver, If the termination count is high, then it influences
   firmware responsiveness. To improve the responsiveness, default IO throttle
   count is reduced to 256.

3) Accessing Virtual Fabric Id (vfid) and fc_map of Fibre-Channel Forwarder(FCF)
   is invalid in fnic driver when Clear Virtual Link(CVL) is received prior to
   receiving flogi reject from switch. As CVL clears all FCFs.

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Anantha Tungarakodi <atungara@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: Update the driver version to 8.07.00.08-k.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: Remove wait for online from host reset handler.

This can block progress of the SCSI error handler thread and cause long I/O
outages.  Instead just fail immediately if another reset is going on or we are
accessing flash memory.

Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: Do logins from a chip reset in DPC thread instead of the error handler thread.

Attempting to do any logins from the SCSI reset handler can lead to a deadlock
scenario if a rport times out and the FC transport layer.  Move doing any port
logins to the DPC thread so as not to impede the progress of the SCSI error
handler thread and avoid deadlock situations.

Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: ABTS cause double free of qla_tgt_cmd +.

Fix double free problem within qla2xxx driver where
current code prematurely free qla_tgt_cmd while firmware
still has the command.  When firmware release the command
after abort, the code attempt a second free as part of
command completion processing.

When TCM start the free process, NULL pointer was hit.

------
WARNING: CPU: 8 PID: 43613 at lib/list_debug.c:62 __list_del_entry+0x82/0xd0()
list_del corruption. next->prev should be ffff88082b5cfb08, but was 6b6b6b6b6b6b6b6b
CPU: 8 PID: 43613 Comm: kworker/8:0 Tainted: GF       W  O 3.13.0-rc3-nab_t10dif+ #6
Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012
Workqueue: events cache_reap
000000000000003e ffff88081b2e3c78 ffffffff815a051f 000000000000003e
ffff88081b2e3cc8 ffff88081b2e3cb8 ffffffff8104fc2c 0000000000000000
ffff88082b5cfb00 ffff88081c788d00 ffff88082b5d7200 ffff88082b5d3080
Call Trace:
[<ffffffff815a051f>] dump_stack+0x49/0x62
[<ffffffff8104fc2c>] warn_slowpath_common+0x8c/0xc0
[<ffffffff8104fd16>] warn_slowpath_fmt+0x46/0x50
[<ffffffff812b6592>] __list_del_entry+0x82/0xd0
[<ffffffff8106d48c>] process_one_work+0x12c/0x510
[<ffffffff8106d4d3>] ? process_one_work+0x173/0x510
[<ffffffff8106ebdf>] worker_thread+0x11f/0x3a0
[<ffffffff8106eac0>] ? manage_workers+0x170/0x170
[<ffffffff81074f26>] kthread+0xf6/0x120
[<ffffffff8109f103>] ? __lock_release+0x133/0x1b0
[<ffffffff81074e30>] ? __init_kthread_worker+0x70/0x70
[<ffffffff815aec2c>] ret_from_fork+0x7c/0xb0
[<ffffffff81074e30>] ? __init_kthread_worker+0x70/0x70
---[ end trace dfc05c3f7caf8ebe ]---
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffff8106d391>] process_one_work+0x31/0x510
-------

Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: T10-Dif: add T10-PI support

Add support for T10-Dif for Target Mode to qla driver.
The driver will look for firmware attribute that support
this feature.  When the feature is present, the capabilities
will be report to TCM layer.

Add CTIO CRC2 iocb to build T10-Dif commands.
Add support routines to process good & error cases.

Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: Remove mapped vp index iterator macro dead code.

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: Add MBC option for fast SFP data access.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: Fix beacon blink logic for ISP26xx/83xx.

Signed-off-by: Himanshu Madani <himanshu.madani@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: Don't check for firmware hung during the reset context for ISP82XX.

Signed-off-by: Tej Prakash <tej.prakash@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: Delay driver unload if there is any pending activity going on.

Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: ISP27xx queue index shadow registers.

For ISP27xx use the request/response queue index shadow registers
to avoid directly access them on the PCI bus.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: ISP27xx firmware dump template spec updates (including T274).

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: Reduce the time we wait for a command to complete during SCSI error handling.

Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: Check the QLA8044_CRB_DRV_ACTIVE_INDEX register when we are not the owner of the reset.

Signed-off-by: Hiral Patel <hiral.patel@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: Clear loop_id for ports that are marked lost during fabric scanning.

Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: Adjust adapter reset routine to the changes in firmware specification for ISPFx00.

Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: Avoid escalating the SCSI error handler if the command is not found in firmware.

If the firmware cannot find the command specified then return SUCCESS to the
error handler so as not to needlessly escalate.  Also cleanup the resources for
the command since we cannot expect the original command to returned in
interrupt context.

Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

qla2xxx: IOCB data should be copied to I/O mem using memcpy_toio.

Signed-off-by: Atul Deshmukh <atul.deshmukh@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>