Arnd Bergmann [Thu, 11 Oct 2018 14:03:38 +0000 (16:03 +0200)]
Merge tag 'samsung-dt-4.20-3' of git://git./linux/kernel/git/krzk/linux into next/dt
Samsung DTS ARM changes for v4.20, second round
Add proper configuration for Odroid XU SD write-protect pin.
* tag 'samsung-dt-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XU
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 5 Oct 2018 15:43:57 +0000 (17:43 +0200)]
Merge tag 'v4.19-next-dts32-2' of git://git./linux/kernel/git/matthias.bgg/linux into next/dt
Add binding description for devices from
MT7623. Clock controller, iommu, JPEG Decoder
and SMI conotroller.
* tag 'v4.19-next-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI
dt-bindings: mediatek: Add JPEG Decoder binding for MT7623
dt-bindings: iommu: mediatek: Add binding for MT7623
dt-bindings: clock: mediatek: add support for MT7623
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 5 Oct 2018 15:24:50 +0000 (17:24 +0200)]
Merge tag 'mvebu-dt-4.20-2' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.20 (part 2)
Auto-detect nand ECC on the armada-385 based board db-88f6820-amc
instead of hard coded them in the device tree.
* tag 'mvebu-dt-4.20-2' of git://git.infradead.org/linux-mvebu:
ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 5 Oct 2018 15:22:59 +0000 (17:22 +0200)]
Merge tag 'mvebu-dt64-4.20-2' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt64 for 4.20 (part 2)
- Add System Error Interrupt support to Armada SoCs (7K/8K)
- Add CPU idle support on Armada 8K
* tag 'mvebu-dt64-4.20-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: clearfog-gt-8k: add PCIe slot description
arm64: dts: marvell: add CP110 ICU SEI subnode
arm64: dts: marvell: use new bindings for CP110 interrupts
arm64: dts: marvell: add AP806 SEI subnode
arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K
arm64: dts: marvell: Add node labels for the cpus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Matthias Brugger [Wed, 3 Oct 2018 09:09:12 +0000 (11:09 +0200)]
dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI
This patch add the binding documentation for the iommu and smi
devices on the MT7623 SoC.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Matthias Brugger [Wed, 3 Oct 2018 09:09:11 +0000 (11:09 +0200)]
dt-bindings: mediatek: Add JPEG Decoder binding for MT7623
This patch adds a binding documentation for the JPEG Decoder of the
MT7623 SoC.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Matthias Brugger [Wed, 3 Oct 2018 09:09:10 +0000 (11:09 +0200)]
dt-bindings: iommu: mediatek: Add binding for MT7623
This patch adds binding documentation for MT7623 SoC.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Matthias Brugger [Wed, 3 Oct 2018 09:09:09 +0000 (11:09 +0200)]
dt-bindings: clock: mediatek: add support for MT7623
This patch adds bindings for apmixedsys, audsys, bpsys, ethsys,
hifsys, imgsys, infracfg, mmsys, pericfg, topckgen and vdecsys
for MT6723.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Chris Packham [Tue, 2 Oct 2018 21:12:33 +0000 (10:12 +1300)]
ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites
This board has a Micron MT29F8G08ABACAWP chip which requires a ECC
strength of 8/512. Rather than hard coding any particular strength the
the nand controller auto-detect the ECC strength based on the ONFI data.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Arnd Bergmann [Thu, 4 Oct 2018 15:20:12 +0000 (17:20 +0200)]
Merge tag 'davinci-for-v4.20/dt' of git://git./linux/kernel/git/nsekhar/linux-davinci into next/dt
DaVinci DT updates for v4.20
----------------------------
- A non-critical fix to reduce errors on A/DC on Lego Mindstorms EV3
- Support for GPIO expander on DA850 EVM
* tag 'davinci-for-v4.20/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lego-ev3: slow down A/DC as much as possible
ARM: dts: da850-evm: Enable tca6416 on baseboard
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 4 Oct 2018 15:08:47 +0000 (17:08 +0200)]
Merge tag 'amlogic-dt64-3' of git://git./linux/kernel/git/khilman/linux-amlogic into next/dt
arm64: dts: Amlogic updates for v4.20, round 3
- AXG: fix eMMC
* tag 'amlogic-dt64-3' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson-axg: s400: disable emmc
arm64: dts: meson-axg: s400: add missing emmc pwrseq
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 4 Oct 2018 15:06:49 +0000 (17:06 +0200)]
Merge tag 'uniphier-dt-v4.20' of git://git./linux/kernel/git/masahiroy/linux-uniphier into next/dt
UniPhier ARM SoC DT updates for v4.20
- Add more clocks to NAND controller nodes
- Add SPI controller nodes
- Add SD controller nodes
- Add USB 3.0 and its PHY nodes
- Add PHY nodes for USB 2.0
* tag 'uniphier-dt-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: Add USB2 PHY nodes
arm64: dts: uniphier: Add USB3 controller nodes
ARM: dts: uniphier: Add USB2 PHY nodes
ARM: dts: uniphier: Add USB3 controller nodes
arm64: dts: uniphier: add SD controller nodes
ARM: dts: uniphier: add SD/eMMC controller nodes
arm64: dts: uniphier: add SPI node for LD20, LD11 and PXs3
ARM: dts: uniphier: add SPI node for UniPhier 32bit SoCs
ARM: dts: uniphier: add SPI pin-mux node
arm64: uniphier: dts: add more clocks to Denali NAND controller node
ARM: uniphier: dts: add more clocks to Denali NAND controller node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 4 Oct 2018 15:04:53 +0000 (17:04 +0200)]
Merge tag 'at91-4.20-dt2' of git://git./linux/kernel/git/at91/linux into next/dt
AT91 DT for 4.20 #2
- fixes NAND size and partitions for some boards
* tag 'at91-4.20-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama5d4_xplained: even nand memory partitions
ARM: dts: at91: sama5d3_xplained: even nand memory partitions
ARM: dts: at91: at91sam9x5cm: even nand memory partitions
ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets
ARM: dts: at91: at91sam9x5cm: fix addressable nand flash size
ARM: dts: at91: sama5d4_xplained: fix addressable nand flash size
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 4 Oct 2018 14:41:38 +0000 (16:41 +0200)]
Merge tag 'v4.19-next-dts32' of git://git./linux/kernel/git/matthias.bgg/linux into next/dt
mt7623:
- add pmu node
- add subsystem clocks
- add nodes needed for iommu
- add node for the jpeg decoder
* tag 'v4.19-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm: dts: mt7623: add jpeg decoder device node
arm: dts: mt7623: add iommu/smi device nodes
arm: dts: mt7623: update subsystem clock controller device nodes
arm: dts: mt7623: add a performance counter unit device node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 4 Oct 2018 14:41:12 +0000 (16:41 +0200)]
Merge tag 'v4.20-rockchip-dts32-1' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
Nodes for the newly support rk3188 display controller, a fix for a new
dtc warning, gpio setting for the sdmmc regulator on radxarock and a
new board the "S" variant of the rk3288-based Tinker board, that sports
an added emmc.
* tag 'v4.20-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add rk3288-based Tinker board S
ARM: dts: rockchip: move shared tinker-board nodes to a common dtsi
ARM: dts: rockchip: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock
ARM: dts: rockchip: Fix erroneous SPI bus dtc warnings on rk3036
ARM: dts: rockchip: add rk3188 lcd controller nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
David Lechner [Mon, 24 Sep 2018 01:31:46 +0000 (20:31 -0500)]
ARM: dts: da850-lego-ev3: slow down A/DC as much as possible
Due to the electrical design of the A/DC circuits on LEGO MINDSTORMS EV3,
if we are reading analog values as fast as possible (i.e. using DMA to
service the SPI) the A/DC chip will read incorrect values - as much as
0.1V off when the SPI is running at 10MHz. (This has to do with the
capacitor charge time when channels are muxed in the A/DC.)
This patch slows down the SPI as much as possible (if CPU is at 456MHz,
SPI runs at 1/2 of that, so 228MHz and has a max prescalar of 256, so
we could get ~891kHz, but we're just rounding it to 1MHz). We also use
the max allowable value for WDELAY to slow things down even more.
These changes reduce the error of the analog values to about 5mV, which
is tolerable.
Commits
a3762b13a596 ("spi: spi-davinci: Add support for SPI_CS_WORD")
and
e2540da86ef8 ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce
CPU usage") introduce changes that allow DMA transfers to be used, so
this slow down is needed now.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Adam Ford [Sun, 30 Sep 2018 16:01:18 +0000 (11:01 -0500)]
ARM: dts: da850-evm: Enable tca6416 on baseboard
There is a GPIO expander on both the UI board as well as the
baseboard. This patch enables the second tca6416 and identifies
it as being on the baseboard using _bb as the suffix.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Arnd Bergmann [Thu, 4 Oct 2018 14:14:33 +0000 (16:14 +0200)]
Merge tag 'v4.20-rockchip-dts64-2' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
Some additional new boards, the rk3399-based RockPro64 from Pine64, as well
as the Vamrs Rock960. Another big feature is display support including hdmi
and the Innosilicon hdmiphy on the rk3328, right now enabled on the rock64.
The rock64 also got its spi-nor and spdif enabled. On the px30 we can see
dwc2-based usb support now and finally some misc fixes, like for a new dtc
warning, missing address and size cells and microSD fix on sapphire.
* tag 'v4.20-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: enable display nodes on rk3328-rock64
arm64: dts: rockchip: add rk3328 display nodes
arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328
arm64: dts: rockchip: add missing address and size cells for rk3399 mipi dsi
arm64: dts: rockchip: Enable SPI NOR flash on Rock64
arm64: dts: rockchip: add initial dts support for Rockpro64
arm64: dts: rockchip: enable dwc2-based otg controller on px30-evb
arm64: dts: rockchip: add dwc2 otg controller on px30
dt-bindings: usb: dwc2: add description for px30
arm64: dts: rockchip: Enable SD card detection for Rock960 boards
arm64: dts: rockchip: Add support for Rock960 board
dt-bindings: arm: rockchip: Add binding for Rock960 board
arm64: dts: rockchip: Split out common nodes for Rock960 based boards
arm64: dts: rockchip: add spdif sound node for rock64
arm64: dts: rockchip: Fix microSD in rk3399 sapphire board
arm64: dts: rockchip: Fix I2C bus unit-address error on rk3399-puma-haikou
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 4 Oct 2018 14:13:04 +0000 (16:13 +0200)]
Merge tag 'omap-for-v4.20/dt-signed-part2' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
More devicetree changes for omap variants
There's a patch for previously merged dts changes to remove the last
remaining use of legacy phy_id property.
For dra7, we have a non-urgent PCIe dts fix, enable a PCIe errata for
unaligned access.
For omap5, we enable omap5 USB OTG mode for DWC3 controller.
And we add support for am335x based Moxa UC-2100 series of industrial
computers.
* tag 'omap-for-v4.20/dt-signed-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x: Replace remaining legacy phy_id with phy-handle
ARM: dts: am335x: add support for Moxa UC-2101 open platform
ARM: dts: am335x: add common file for UC-2100 series
ARM: dts: omap5: enable OTG role for DWC3 controller
ARM: dts: dra7: Enable workaround for errata i870 in PCIe host mode
ARM: dts: dra7: Fix up unaligned access setting for PCIe EP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Kunihiko Hayashi [Tue, 2 Oct 2018 11:12:02 +0000 (20:12 +0900)]
arm64: dts: uniphier: Add USB2 PHY nodes
Add nodes of USB2 physical layer for UniPhier SoC. This supports LD11.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kunihiko Hayashi [Tue, 2 Oct 2018 11:12:01 +0000 (20:12 +0900)]
arm64: dts: uniphier: Add USB3 controller nodes
Add USB3 controller nodes including usb-core, resets, regulator, ss-phy
and hs-phy. This supports for LD20, PXs3 and the boards. This includes
additional efuse nodes for obtaining PHY trimming values.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kunihiko Hayashi [Tue, 2 Oct 2018 11:12:00 +0000 (20:12 +0900)]
ARM: dts: uniphier: Add USB2 PHY nodes
Add nodes of USB2 physical layer for UniPhier SoC. This supports Pro4.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kunihiko Hayashi [Tue, 2 Oct 2018 11:11:59 +0000 (20:11 +0900)]
ARM: dts: uniphier: Add USB3 controller nodes
Add USB3 controller nodes including usb-core, resets, regulator, ss-phy
and hs-phy. This supports for Pro4, PXs2 and the boards.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Jerome Brunet [Tue, 2 Oct 2018 08:43:41 +0000 (10:43 +0200)]
arm64: dts: meson-axg: s400: disable emmc
While it is possible to rework the s400 board to solder an eMMC on it,
it is not the default option and most boards are fitted with a NAND
instead.
Let's disable the emmc device by default to reflect this. The board
equipped with an eMMC will just have to alter the DT in the
bootloader, like we do for the reserved memory regions.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Tue, 2 Oct 2018 08:43:40 +0000 (10:43 +0200)]
arm64: dts: meson-axg: s400: add missing emmc pwrseq
eMMC pwrseq is defined in the s400 dts but not used in the emmc node.
This is probably just a copy/paste error
Fixes:
221cf34bac54 ("ARM64: dts: meson-axg: enable the eMMC controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Baruch Siach [Wed, 3 Oct 2018 13:23:01 +0000 (16:23 +0300)]
arm64: dts: clearfog-gt-8k: add PCIe slot description
This adds support for the PCIe interface on the CON4 mini-PCIe
connector.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tudor Ambarus [Tue, 2 Oct 2018 13:20:38 +0000 (16:20 +0300)]
ARM: dts: at91: sama5d4_xplained: even nand memory partitions
sama5d4_xplained, ssam9x5cm, sama5d2_ptc_ek and sama5d3_xplained nand
flashes have a common memory map. Even the nand memory partitions to
match our NAND flash map available at:
http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.png
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tudor Ambarus [Tue, 2 Oct 2018 13:20:37 +0000 (16:20 +0300)]
ARM: dts: at91: sama5d3_xplained: even nand memory partitions
sama5d3_xplained, sam9x5cm, sama5d2_ptc_ek and sama5d4_xplained nand
flashes have a common memory map. Even the nand memory partitions to
match our nand flash map available at:
http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.png
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tudor Ambarus [Tue, 2 Oct 2018 13:20:36 +0000 (16:20 +0300)]
ARM: dts: at91: at91sam9x5cm: even nand memory partitions
sam9x5cm, sama5d2_ptc_ek, sama5d3_xplained and sama5d4_xplained nand
flashes have a common memory map. Even the nand memory partitions to
match our nand flash map available at:
http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.png
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tudor Ambarus [Tue, 2 Oct 2018 13:20:35 +0000 (16:20 +0300)]
ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets
The offsets for the bootloader environment and its redundant partition
were inverted. Fix the addresses to match our nand flash map available at:
http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.png
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tudor Ambarus [Tue, 2 Oct 2018 13:00:36 +0000 (16:00 +0300)]
ARM: dts: at91: at91sam9x5cm: fix addressable nand flash size
at91sam9x5cm comes with a 2Gb NAND flash. Fix the rootfs size to
match this limit.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tudor Ambarus [Tue, 2 Oct 2018 13:00:35 +0000 (16:00 +0300)]
ARM: dts: at91: sama5d4_xplained: fix addressable nand flash size
sama5d4_xplained comes with a 4Gb NAND flash. Increase the rootfs
size to match this limit.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Miquel Raynal [Wed, 3 Oct 2018 07:25:15 +0000 (09:25 +0200)]
arm64: dts: marvell: add CP110 ICU SEI subnode
The ICU handles several interrupt groups, each of them being a subpart
of the ICU node.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Miquel Raynal [Wed, 3 Oct 2018 07:25:14 +0000 (09:25 +0200)]
arm64: dts: marvell: use new bindings for CP110 interrupts
Create an ICU subnode for the NSR interrupts. This subnode becomes the
CP110 interrupt parent, removing the need for the ICU_GRP_NSR parameter.
Move all DT110 nodes to use these new bindings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Masahiro Yamada [Tue, 2 Oct 2018 22:59:51 +0000 (07:59 +0900)]
arm64: dts: uniphier: add SD controller nodes
Add SD controller nodes for LD20 and PXs3.
LD20 does not support the UHS mode, while PXs3 supports it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 2 Oct 2018 22:59:50 +0000 (07:59 +0900)]
ARM: dts: uniphier: add SD/eMMC controller nodes
Add SD controller nodes for LD4, Pro4, sLD8, Pro5, and PXs2.
This is also used as an eMMC controller for LD4, Pro4, and sLD8.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Miquel Raynal [Mon, 1 Oct 2018 14:13:56 +0000 (16:13 +0200)]
arm64: dts: marvell: add AP806 SEI subnode
Add the System Error Interrupt node, representing an IRQ chip which is
part of the GIC. The SEI node aggregates interrupts from the AP through
wired interrupts, and from the CPs through MSIs.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
orenbh [Fri, 21 Sep 2018 16:09:16 +0000 (18:09 +0200)]
arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K
This patch adds CPU deep Idle and Cluster deep Idle states BUT it defines
the idle state for each cpu (defined under cpu-idle-states parameter)
only for the quad version therefore it does NOT activate CPU Idle
capability for the other version.
[gregory: extract from a larger patch]
Signed-off-by: orenbh <orenbh@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Gregory CLEMENT [Fri, 21 Sep 2018 16:09:15 +0000 (18:09 +0200)]
arm64: dts: marvell: Add node labels for the cpus
Aligned with what we have done for the others nodes. It will also allow
to easily modify the cpu configuration at board (or sub-SoC) level.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Arnd Bergmann [Tue, 2 Oct 2018 10:03:40 +0000 (12:03 +0200)]
Merge tag 'omap-for-v4.20/dt-signed-v2' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Devicetree changes for omap variants
This branch contains a series of improvments for omap3-gta04 phone,
and a series of clean-up for am335x to remove the deprecated phy_id
property.
The rest is to configure am57xx-idk boards for leds, load trigger,
and smps, am3517-evm audio configuration, beaglebone hdmi cec support,
coresight binding update, and fixes for i2c and spi warnings.
* tag 'omap-for-v4.20/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (70 commits)
ARM: dts: add omap3-gta04a5one to Makefile
ARM: dts: omap3-gta04: add pulldown/up settings for twl4030 gpio
ARM: dts: am335x-boneblack: add cec support
ARM: dts: am3517-evm: Add support for UI board and Audio
ARM: dts: gta04: add serial console wakeup irq
ARM: dts: am57xx-idk-common: Hook smps12 regulator as cpu vdd-supply
ARM: dts: omap: Update coresight bindings for hardware ports
ARM: dts: ti: Fix SPI and I2C bus warnings
ARM: dts: dra62x-j5eco-evm: get rid of phy_id property
ARM: dts: dm8148-t410: get rid of phy_id property
ARM: dts: dm8148-evm: get rid of phy_id property
ARM: dts: am57xx-cl-som-am57x: get rid of phy_id property
ARM: dts: am57xx-idk-common: get rid of phy_id property
ARM: dts: dra7-evm: get rid of phy_id property
ARM: dts: dra71-evm: get rid of phy_id property
ARM: dts: dra72-evm-revc: get rid of phy_id property
ARM: dts: dra72-evm: get rid of phy_id property
ARM: dts: dra76-evm: get rid of phy_id property
ARM: dts: am437x-cm-t43: get rid of phy_id property
ARM: dts: am437x-gp-evm: get rid of phy_id property
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Oct 2018 09:47:21 +0000 (11:47 +0200)]
Merge tag 'mvebu-dt64-4.20-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt64 for 4.20 (part 1)
- Add watchdog node on Armada 37xx
- Update PPv2 interrupts name
- Add support for the SolidRun Clearfog GT 8K (Aramda 8040 based)
- Add thermal-zone nodes for Aramda 7K/8K
* tag 'mvebu-dt64-4.20-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: armada-37xx: add nodes to support watchdog
arm64: dts: marvell: armada-cp110: describe more PPv2 interrupts
arm64: dts: marvell: armada-cp110: change the PPv2 IRQ names
arm64: dts: add support for SolidRun Clearfog GT 8K
arm64: dts: marvell: add thermal-zone node in cp110 DTSI file
arm64: dts: marvell: add macro to make distinction between node names
arm64: dts: marvell: add thermal-zone node in ap806 DTSI file
arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Oct 2018 09:43:24 +0000 (11:43 +0200)]
Merge tag 'mvebu-dt-4.20-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.20 (part 1)
- updates the armada-xp-98dx3236 SoC and related boards to use the new
style dts bindings for nand
- add db-88f6820-amc board: plugin card for some of Marvell's switch
development kits
- fix SPI and I2C bus warnings coming with the new checks in dtc
- add new compatible string "marvell,prestera" to the armada-xp-98dx*
- fix sdhci supply property name on the clearfog (the '-supply' suffix
was missing)
* tag 'mvebu-dt-4.20-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: clearfog: fix sdhci supply property name
ARM: dts: mvebu: add "marvell,prestera" to PP nodes
ARM: dts: marvell: Fix SPI and I2C bus warnings
ARM: dts: mvebu: Add device tree for db-88f6820-amc board
ARM: dts: mvebu: db-xc3-24g4: use new style nand binding
ARM: dts: mvebu: db-dxbc2: use new style nand binding
ARM: dts: mvebu: 98dx3236: Rename nand controller node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Oct 2018 09:41:43 +0000 (11:41 +0200)]
Merge tag 'imx-dt64-4.20' of git://git./linux/kernel/git/shawnguo/linux into next/dt
Freescale arm64 device tree update for 4.20:
- Add the second Dual UART device for LS208xA SoCs.
- Add necessary big-endian property for NOR device on LS104xA based
boards, remove unneeded big-endian property from IFC controller.
- DTC has new checks for I2C and SPI buses to land into 4.20. A patch
from Rob to fix the bus node names and warnings in unit-addresses.
* tag 'imx-dt64-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: fsl: Fix I2C and SPI bus warnings
arm64: dts: ls208xa: add second duart
arm64: dts: fsl: remove big-endian field from IFC controller
arm64: dts: Add big-endian in nor node for ls104xa
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Oct 2018 09:36:53 +0000 (11:36 +0200)]
Merge tag 'imx-dt-4.20' of git://git./linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree update for 4.20:
- New board support: Engicam's i.Core MX6 CPU module v1.5; ConnectCore
6UL Single Board Computer (SBC) Pro; i.MX6 ULZ based EVK board.
- Add Add SFF interface support for vf610-zii board.
- Disable unneeded devices like VPU and internal watchdog for imx51-zii
boards.
- Add 'no-sdio' and 'no-sd' property for vf610-zii-cfu1 board.
- Improve i.MX6 SLL GPIO support by adding gpio-ranges property and
clocks information.
- Update iomux header for i.MX7 Solo and i.MX6 ULL.
- Enable GPIO buttons as wakeup source for imx7d-sdb and imx6sx-sdb.
- Add GPIO keys and egalax touch screen support for imx6qdl-sabreauto.
- Switch to use SPDX-License-Identifier for more boards - vf610-twr,
imx7s-warp, Engicam boards.
- Add device tree bindings of 'fsl,pmic-stby-poweroff' property and add
the support for i.MX6 RIoTboard.
- DTC has new checks for SPI buses which will be landed on 4.20.
A patch from Rob to fix those 100+ warnings on i.MX boards. (Thanks!)
- Switch i.MX7 device tree to use updated coresight binding for
hardware ports.
- Misc small or random update and cleanup.
* tag 'imx-dt-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits)
ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support
dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board
ARM: dts: imx53-ppd: Remove 'num-chipselects' property
ARM: dts: vf610-twr: Switch to SPDX identifier
ARM: dts: vf: Switch to SPDX identifier
ARM: dts: imx6qdl-zii-rdu2: Disable the internal RTC
ARM: dts: imx51-zii-rdu1: Fix the rtc compatible string
ARM: dts: imx6ul: use nvmem-cells for cpu speed grading
ARM: dts: imx: Fix SPI bus warnings
ARM: dts: imx7: Update coresight binding for hardware ports
ARM: dts: vf610-zii-cfu1: Pass the 'no-sd' property
ARM: dts: vf610-zii-cfu1: Pass the 'no-sdio' property
ARM: dts: imx51-zii-scu2-mezz: Disable the internal watchdog
ARM: dts: imx51-zii-scu2-mezz: Disable VPU
ARM: dts: imx51-zii-scu3-esb: Disable VPU
ARM: dts: imx51: Add label for VPU node
ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating point
ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro
ARM: dts: imx6: RIoTboard provide standby on power off option
dt-bindings: imx6q-clock: add new fsl,pmic-stby-poweroff property
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Oct 2018 09:32:10 +0000 (11:32 +0200)]
Merge tag 'qcom-dts-for-4.20' of git://git./linux/kernel/git/agross/linux into next/dt
Qualcomm Device Tree Changes for v4.20
* Fix IRQ constants usage on MSM8974
* Add led, gpio-button, sdcc, and pcie nodes for IPQ8064
* Move/cleanup common nodes for IPQ8064
* Add i2c sensor nodes for MSM8974 Hammerhead
* Fixes for SAW, kpss, opp, pci range, and space/tab on IPQ4019
* Update coresight bindings
* tag 'qcom-dts-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: qcom: Update coresight bindings for hardware ports
ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value
ARM: dts: qcom: ipq4019: fix space vs tab indenting inside qcom-ipq4019.dtsi
ARM: dts: qcom: ipq4019: fix PCI range
ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value
ARM: dts: qcom: ipq4019: add cpu operating points for cpufreq support
ARM: dts: qcom: ipq4019: use v2 of the kpss bringup mechanism
ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity
ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515
ARM: dts: qcom: Add led and gpio-button nodes to ipq8064 boards
ARM: dts: qcom: Move common nodes to ipq8064-v.1.0.dtsi
ARM: dts: qcom: Add sdcc nodes for ipq8064
ARM: dts: qcom: Add pcie nodes for ipq8064
ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value
ARM: dts: qcom-msm8974: use named constant for interrupt flag NONE
ARM: dts: qcom-msm8974: use named constant for interrupt flag LEVEL HIGH
ARM: dts: qcom-msm8974: use named constant for interrupt flag EDGE RISING
ARM: dts: qcom-msm8974: use named constant for interrupt type GIC_SPI
ARM: dts: qcom-msm8974: use named constant for interrupt type GIC_PPI
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Oct 2018 09:21:52 +0000 (11:21 +0200)]
Merge tag 'qcom-arm64-for-4.20' of git://git./linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.20
* Update Coresight for MSM8916
* Switch to use mailbox for smp2p and smd on MSM8996
* Add dispcc, dsp, USB, regulator, and other nodes for SDM845
* Drop model/compatible from MSM8916 and MSM8996
* Add compat for db820c
* Add MSM8998 SoC and board support along with associated nodes
* Add RESIN/PON for Qualcomm PM8916 and PM8994
* tag 'qcom-arm64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (31 commits)
Revert "dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'"
Revert "dt-bindings: iio: vadc: Fix documentation of 'reg'"
arm64: dts: msm8916: Update coresight bindings for hardware ports
arm64: dts: msm8996: Transition smp2p and smd to mailbox
arm64: dts: qcom: pm8998: Add pm8998 thermal zone
arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'
arm64: dts: sdm845: Add dispcc node
arm64: dts: qcom: sdm845: Add adsp, cdsp and slpi smp2p
arm64: dts: qcom: sdm845-mtp: Add nodes for USB
arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
arm64: dts: qcom: sdm845: Add USB-related nodes
arm64: dts: qcom: Add AOSS reset driver node for SDM845
arm64: dts: msm8996: Drop model
arm64: dts: msm8916: Drop model and compatible
arm64: dts: db820c: Add qcom,apq8096 to compatible string
arm64: dts: qcom: Populate pm8998 with additional nodes
arm64: dts: qcom: msm8998: Add smp2p nodes
arm64: dts: qcom: msm8998: Add the qfprom node
arm64: dts: qcom: msm8998: Add firmware node
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Oct 2018 09:18:24 +0000 (11:18 +0200)]
Merge tag 'actions-arm64-dt-for-4.20' of git://git./linux/kernel/git/afaerber/linux-actions into next/dt
Actions Semi arm64 based SoC DT for v4.20
This updates SPDX headers for remaining files.
For S900 it adds clock, pinctrl, i2c and dma nodes.
S900 SPS is added via topic branch (shared with driver).
For S700 it adds clock nodes.
* tag 'actions-arm64-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
arm64: dts: actions: s700: Set UART clock references from CMU
arm64: dts: actions: s700: Add Clock Management Unit
arm64: dts: actions: s900: Add DMA Controller
arm64: dts: actions: s900-bubblegum-96: Enable I2C1 and I2C2
arm64: dts: actions: s900: Add I2C controller nodes
arm64: dts: actions: s900-bubblegum-96: Add gpio line names
arm64: dts: actions: s900: Add gpio properties to pinctrl node
arm64: dts: actions: s900: Add pinctrl node
arm64: dts: actions: s900: Add SPS node
arm64: dts: actions: s900: Source CMU clock for UARTs
arm64: dts: actions: s900: Add Clock Management Unit nodes
dt-bindings: power: Add Actions Semi S900 SPS
arm64: dts: actions: Convert to new-style SPDX license identifiers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Oct 2018 09:16:16 +0000 (11:16 +0200)]
Merge tag 'actions-arm-dt-for-4.20' of git://git./linux/kernel/git/afaerber/linux-actions into next/dt
Actions Semi arm based SoC DT for v4.20
This updates SPDX headers for remaining files.
* tag 'actions-arm-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
ARM: dts: owl: Convert to new-style SPDX license identifiers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Oct 2018 09:13:38 +0000 (11:13 +0200)]
Merge tag 'v4.19-next-dts64' of git://git./linux/kernel/git/matthias.bgg/linux into next/dt
mt2712 - add spi slave node
mt7622:
- add timer node
- add CCI node
- add PMU node
- add bluetooth node
- add SPI slave node
- fix reference board (rfb1) memory and sort node alphabetically
- add support for Bananapi-R64
* tag 'v4.19-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: Add spi slave dts
arm64: dts: mt7622: add bananapi BPI-R64 board
arm64: dts: mt7622: fix ram size for rfb1
arm64: dts: mt7622: add a bluetooth 5 device node
arm64: dts: mt7622: add timer, CCI-400 and PMU nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Oct 2018 08:28:14 +0000 (10:28 +0200)]
Merge tag 'sunxi-dt64-for-4.20' of git://git./linux/kernel/git/sunxi/linux into next/dt
Allwinner arm64 DT changes for 4.20
Our usual set of DT changes for the arm64 Allwinner SoCs.
The most notable things are:
- HDMI support on the A64
- New boards: OrangePi One Plus
* tag 'sunxi-dt64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (28 commits)
arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay
arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI
arm64: dts: allwinner: a64: Add display pipeline
arm64: dts: allwinner: h6: add system controller device tree node
arm64: dts: allwinner: h6: Add OrangePi One Plus initial support
arm64: dts: allwinner: a64: Rename r_i2c_pins_a label to r_i2c_pl89_pins
arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins
arm64: dts: allwinner: a64: Split out data strobe pin from mmc2 pinmux
arm64: dts: allwinner: a64: NanoPi-A64: Add blue status LED
arm64: dts: allwinner: a64: NanoPi-A64: Add Wifi chip
arm64: dts: allwinner: a64: NanoPi-A64: Add Ethernet
arm64: dts: allwinner: a64: NanoPi-A64: Fix DCDC1 voltage
arm64: dts: allwinner: a64: Olinuxino: enable USB
arm64: dts: allwinner: a64: Olinuxino: add Ethernet nodes
arm64: dts: allwinner: a64: Olinuxino: fix DRAM voltage
arm64: dts: allwinner: a64: Orange Pi Win: Adjust CSI power rails
arm64: dts: allwinner: a64: Orange Pi Win: Add SPI flash node
arm64: dts: allwinner: a64: Orange Pi Win: Add SDIO node
arm64: dts: allwinner: a64: Orange Pi Win: Add LED node
arm64: dts: allwinner: a64: Orange Pi Win: Add UARTs
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Oct 2018 08:25:41 +0000 (10:25 +0200)]
Merge tag 'sunxi-dt-for-4.20' of git://git./linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.20
Our usual bunch of DT patches for the Allwinner arm32 SoCs.
The most notable changes are:
- Support for the video decoding / encoding engine on the
A10s/A13/A20/A33
- IR support for the A83t
- SATA support for the R40
* tag 'sunxi-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun9i: Fix I2C bus warnings
ARM: dts: sunxi: Fix I2C bus warnings
ARM: dts: sun8i-a33: Add Video Engine and reserved memory nodes
ARM: dts: sun7i-a20: Add Video Engine and reserved memory nodes
ARM: dts: sun5i: Add Video Engine and reserved memory nodes
ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI
ARM: dts: sun8i: r40: add sata node
ARM: dts: sunxi: Don't use cd-inverted in sun8i-r40-bananapi-m2-ultra
ARM: dts: sun8i: a83t: bananapi-m3: Enable IR controller
ARM: dts: sun8i: a83t: Add support for the cir interface
ARM: dts: sun8i: a83t: Add the cir pin for the A83T
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Oct 2018 08:19:31 +0000 (10:19 +0200)]
Merge tag 'sunxi-h3-h5-for-4.20' of git://git./linux/kernel/git/sunxi/linux into next/dt
Allwinner H3 and H5 DT additions for 4.20
This is our usual H3/H5 pull request
The most notable changes are:
- the video decoding / encoding unit is finally enabled on the H3
- Mali support for the H5
- New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support
* tag 'sunxi-h3-h5-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees
ARM: dts: sun8i-h3: Add Video Engine and reserved memory nodes
arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5
ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus
ARM: dts: sun8i: h3: bpi-m2-plus: Fix address for external RGMII Ethernet PHY
ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block
arm64: dts: allwinner: h5: Add device node for Mali-450 GPU
ARM: dts: sun8i: Add initial Orangepi Zero Plus 2 H3 support
nvmem: sunxi-sid: add support for H5's SID controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof Kozlowski [Wed, 26 Sep 2018 19:02:48 +0000 (21:02 +0200)]
ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XU
Add SD card write-protect pin configuration to be sure that it will be
properly pulled down to indicate write access.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Suzuki K Poulose [Wed, 12 Sep 2018 13:53:50 +0000 (14:53 +0100)]
ARM: dts: qcom: Update coresight bindings for hardware ports
Switch to the new hardware port bindings for coresight
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Andy Gross [Sun, 30 Sep 2018 17:58:10 +0000 (12:58 -0500)]
Revert "dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'"
This reverts commit
e704472616d7e185b839991b611a77711dbb22e3.
Already picked up via Eduardo's thermal tree
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Andy Gross [Sun, 30 Sep 2018 17:57:07 +0000 (12:57 -0500)]
Revert "dt-bindings: iio: vadc: Fix documentation of 'reg'"
This reverts commit
7028cae1857cc2c6acc69586584e92d044027154.
Already picked up via iio tree.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Saravanan Sekar [Thu, 19 Jul 2018 09:06:49 +0000 (11:06 +0200)]
arm64: dts: actions: s700: Set UART clock references from CMU
Remove fixed clock in Cubieboard 7 and use Clock Management Unit clocks
for all UART nodes in Actions Semi S700 SoC.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[AF: Moved/added to SoC]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Saravanan Sekar [Thu, 19 Jul 2018 09:06:48 +0000 (11:06 +0200)]
arm64: dts: actions: s700: Add Clock Management Unit
Add Clock Management Unit for Actions Semi S700 SoC.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Manivannan Sadhasivam [Fri, 21 Sep 2018 19:03:59 +0000 (12:03 -0700)]
arm64: dts: actions: s900: Add DMA Controller
Add DMA controller node for Actions Semi S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Manivannan Sadhasivam [Wed, 1 Aug 2018 18:02:28 +0000 (23:32 +0530)]
arm64: dts: actions: s900-bubblegum-96: Enable I2C1 and I2C2
Add pinctrl definitions for Actions Semiconductor S900 I2C controllers.
Pinctrl definitions are only available for I2C0, I2C1, and I2C2.
Enable I2C1 and I2C2 exposed on the low speed expansion connector in
Bubblegum-96 board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[AF: Squashed]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Manivannan Sadhasivam [Wed, 1 Aug 2018 18:02:29 +0000 (23:32 +0530)]
arm64: dts: actions: s900: Add I2C controller nodes
Add I2C controller nodes for Actions Semiconductor S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[AF: Squashed/added clocks, dropped pinctrl properties for now]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Manivannan Sadhasivam [Sun, 20 May 2018 05:17:34 +0000 (10:47 +0530)]
arm64: dts: actions: s900-bubblegum-96: Add gpio line names
Add gpio line names to Actions Semi S900 based Bubblegum-96 board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Manivannan Sadhasivam [Sun, 20 May 2018 05:17:33 +0000 (10:47 +0530)]
arm64: dts: actions: s900: Add gpio properties to pinctrl node
Add gpio properties to pinctrl node for Actions Semi S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Manivannan Sadhasivam [Wed, 4 Apr 2018 17:22:50 +0000 (22:52 +0530)]
arm64: dts: actions: s900: Add pinctrl node
Add pinctrl nodes for Actions Semi S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Manivannan Sadhasivam [Wed, 11 Apr 2018 16:40:34 +0000 (22:10 +0530)]
arm64: dts: actions: s900: Add SPS node
Add Actions Semi S900 Smart Power System (SPS) node.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 30 Sep 2018 16:44:30 +0000 (18:44 +0200)]
Merge branch 'v4.20/s900-sps-bindings' into v4.20/dt64
This adds DT bindings for the S900 SPS.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Manivannan Sadhasivam [Fri, 9 Feb 2018 17:24:37 +0000 (22:54 +0530)]
arm64: dts: actions: s900: Source CMU clock for UARTs
Remove fixed clock in Bubblegum-96 board and source CMU (Clock
Management Unit) clock for UART nodes in Actions Semi S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[AF: Move/add clocks to SoC]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Manivannan Sadhasivam [Mon, 6 Nov 2017 19:45:51 +0000 (01:15 +0530)]
arm64: dts: actions: s900: Add Clock Management Unit nodes
Add Actions Semi S900 Clock Management Unit (CMU) nodes.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Manivannan Sadhasivam [Wed, 11 Apr 2018 16:40:33 +0000 (22:10 +0530)]
dt-bindings: power: Add Actions Semi S900 SPS
Define power domains for Actions Semi S900 SoC Smart Power System (SPS).
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Anson Huang [Sun, 30 Sep 2018 03:32:28 +0000 (11:32 +0800)]
ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support
i.MX6ULZ is new SoC of i.MX6 family, compared to i.MX6ULL,
it removes below modules:
- UART5/UART6/UART7/UART8;
- PWM5/PWM6/PWM7/PWM8;
- eCSPI3/eCSPI4;
- CAN1/CAN2;
- FEC1/FEC2;
- I2C3/I2C4;
- EPIT2;
- LCDIF;
- GPT2;
- ADC1;
- TSC;
This patch adds support for i.MX6ULZ and i.MX6ULZ 14x14 EVK
board.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Anson Huang [Sun, 30 Sep 2018 03:32:27 +0000 (11:32 +0800)]
dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board
This patch adds compatible for i.MX6ULZ 14x14 EVK board.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Tue, 25 Sep 2018 16:24:08 +0000 (13:24 -0300)]
ARM: dts: imx53-ppd: Remove 'num-chipselects' property
The 'num-chipselects' property is not a valid property according
to Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt, so
let's remove it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Tue, 25 Sep 2018 16:08:02 +0000 (13:08 -0300)]
ARM: dts: vf610-twr: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Tue, 25 Sep 2018 16:08:01 +0000 (13:08 -0300)]
ARM: dts: vf: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Chen-Yu Tsai [Wed, 26 Sep 2018 13:23:39 +0000 (21:23 +0800)]
ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees
Bananapi released an updated revision of the H3/H5 based Bananapi M2+.
Version 1.2 enables voltage control for the CPU's regulator by using
a GPIO line to toggle a MOSFET that can change the effective resistance
value in the regulator's feedback network.
This patch adds a common .dtsi file for this new revision, which
includes the original common sunxi-bananapi-m2-plus.dtsi file, and
adds the GPIO-controlled regulator and a cpu-supply reference. H3
and H5 variant dts files are added as well.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Paul Kocialkowski [Thu, 6 Sep 2018 22:24:42 +0000 (00:24 +0200)]
ARM: dts: sun8i-h3: Add Video Engine and reserved memory nodes
This adds nodes for the Video Engine and the associated reserved memory
for the H3. Up to 96 MiB of memory are dedicated to the CMA pool.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Chen-Yu Tsai [Thu, 30 Aug 2018 08:09:26 +0000 (16:09 +0800)]
arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5
The Bananapi M2 Plus H5 is a variant of the original Bananapi M2 Plus,
with the H3 SoC replaced with an H5. Everything else is the same.
Add a stub device tree incorporating the shared bananapi-m2-plus dtsi
file.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Chen-Yu Tsai [Thu, 30 Aug 2018 08:09:25 +0000 (16:09 +0800)]
ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus
Three more variants of the Bananapi M2 Plus have been introduced. One
with the H5 instead of the H3, another with the H2+ instead, and the
last with the H3 but with WiFi and eMMC removed.
All these variants use the same board. This patch splits out the
non-SoC-specific parts of the device tree, so that they can be shared
among all the variants. The original Bananapi M2 Plus has been renamed
to Bananapi M2 Plus H3.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Chen-Yu Tsai [Thu, 30 Aug 2018 08:09:24 +0000 (16:09 +0800)]
ARM: dts: sun8i: h3: bpi-m2-plus: Fix address for external RGMII Ethernet PHY
The external RTL8211E RGMII Ethernet PHY is configured via external
resistors to use the address 0x1. The 0x0 address is a broadcast address
for this family of PHYs, and should not be used explicitly.
Fixes:
8c7ba536e709 ("ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i")
Fixes:
4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)")
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Philipp Rossak [Wed, 1 Aug 2018 09:48:01 +0000 (11:48 +0200)]
ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block
The size of the register should be the size of the whole memory block,
not just the registers, that are needed.
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Chen-Yu Tsai [Fri, 24 Aug 2018 05:38:49 +0000 (13:38 +0800)]
arm64: dts: allwinner: h5: Add device node for Mali-450 GPU
The H5 has a Mali-450 GPU with 4 Pixel Processor cores.
Interestingly, while the datasheet lists an interrupt line for the GPU's
PMU, the hardware block itself doesn't seem to have it. Reads from the
PMU address range all return zero, and writes are ignored.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Diego Rondini [Fri, 3 Aug 2018 07:56:25 +0000 (09:56 +0200)]
ARM: dts: sun8i: Add initial Orangepi Zero Plus 2 H3 support
Orangepi Zero Plus 2 is an open-source single-board computer, available in two
Allwinner SOC variants, H3 and H5. We add support for H3 variant here, as the
H5 is already supported by sun50i-h5-orangepi-zero-plus2.dts.
H3 Orangepi Zero Plus 2 has:
- Quad-core Cortex-A7
- 512MB DDR3
- microSD slot and 8GB eMMC
- Debug TTL UART
- HDMI
- Wifi + BT
- OTG + power supply
Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Emmanuel Vadot [Fri, 27 Jul 2018 11:52:04 +0000 (13:52 +0200)]
nvmem: sunxi-sid: add support for H5's SID controller
The H5 SoC have a SID controller that looks like the one in A64, the
cells are in the same offset but doesn't contain the same data (thermal
sensor calibration for example).
Add a binding for it.
Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Leilk Liu [Fri, 28 Sep 2018 10:53:05 +0000 (18:53 +0800)]
arm64: dts: Add spi slave dts
This patch adds MT2712 spi slave into device tree.
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Tony Lindgren [Fri, 28 Sep 2018 20:32:01 +0000 (13:32 -0700)]
ARM: dts: am335x: Replace remaining legacy phy_id with phy-handle
Looks like we still have two instances of phy_handle that did not
get update by Grygorii's series. Let's replace these too with
standard phy-handle.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Neeraj Dantu <dantuguf14105@gmail.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
SZ Lin (林上智) [Fri, 28 Sep 2018 10:47:52 +0000 (18:47 +0800)]
ARM: dts: am335x: add support for Moxa UC-2101 open platform
Add support for Moxa UC-2101 open platform
The UC-2101 computing platform is designed for industrial embedded
data acquisition and processing applications.
The features of UC-2101 are:
* eMMC
* SPI flash
* 1x LAN
* 1x RS-232/422/485 ports, software-selectable
* EEPROM
* TPM 2.0
* Watchdog
* RTC
* User gpio-keys
* User LEDs
* User button
Signed-off-by: Wes Huang (黃淵河) <wes.huang@moxa.com>
Signed-off-by: Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
SZ Lin (林上智) [Fri, 28 Sep 2018 10:47:16 +0000 (18:47 +0800)]
ARM: dts: am335x: add common file for UC-2100 series
The UC-2100 series consists many boards with different peripheral
devices and wireless modules, hence we fetch common items and
create a common dtsi file to increase reusability. All boards in
UC-2100 series will include this common dtsi file.
Signed-off-by: Wes Huang (黃淵河) <wes.huang@moxa.com>
Signed-off-by: Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
H. Nikolaus Schaller [Fri, 28 Sep 2018 15:54:00 +0000 (17:54 +0200)]
ARM: dts: omap5: enable OTG role for DWC3 controller
Since SMPS10 and OTG cable detection extcon are described here, and
work to enable OTG power when an OTG cable is plugged in, we can
define OTG mode in the controller (which is disabled by default in
omap5.dtsi).
Tested on OMAP5EVM and Pyra.
Suggested-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Vignesh R [Fri, 28 Sep 2018 06:04:42 +0000 (11:34 +0530)]
ARM: dts: dra7: Enable workaround for errata i870 in PCIe host mode
Add ti,syscon-unaligned-access property to PCIe RC nodes to set
appropriate bits in CTRL_CORE_SMA_SW_7 register to enable workaround for
errata i870.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Vignesh R [Tue, 25 Sep 2018 05:21:51 +0000 (10:51 +0530)]
ARM: dts: dra7: Fix up unaligned access setting for PCIe EP
Bit positions of PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE and
PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE in CTRL_CORE_SMA_SW_7 are
incorrectly documented in the TRM. In fact, the bit positions are
swapped. Update the DT bindings for PCIe EP to reflect the same.
Fixes:
d23f3839fe97 ("ARM: dts: DRA7: Add pcie1 dt node for EP mode")
Cc: stable@vger.kernel.org
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Arnd Bergmann [Fri, 28 Sep 2018 15:44:38 +0000 (17:44 +0200)]
Merge tag 'renesas-dt-bindings-for-v4.20' of git://git./linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Bindings Updates for v4.20
* Document bindings for:
- RZ/G2E (r8a774c0), RZ/G2M (r8a774a1) and RZ/A2 (r7s9210) SoCs
- R-Car M3-N (r8a77965) SoC based ULCB board
* tag 'renesas-dt-bindings-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
dt-bindings: arm: Document RZ/G2E SoC DT bindings
dt-bindings: arm: Document Renesas R-Car M3-N-based ULCB board
dt-bindings: arm: Document RZ/A2 SoC DT bindings
dt-bindings: arm: Document RZ/G2M SoC DT bindings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 15:43:14 +0000 (17:43 +0200)]
Merge tag 'renesas-arm-dt2-for-v4.20' of git://git./linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM Based SoC DT Updates for v4.20
* RZ/G1M (r8a7743) based iWave G20D-Q7 board and camera daughter board
- Move PCIe node out of common dtsi to allow reuse of the common dtsi
on the iWave RZ/G1N board
* RZ/G1C (r8a77470) SoC: Add I2C4, SDHI2 and SMP support
* R-Car Gen1 based boards and R-Car Gen2 SoCs:
- Enhance top-of-file comments to include SoC name
* RZ/N1D (r9a06g032) SoC:
- Correct UART0 description and add all other UARTs
* tag 'renesas-arm-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: iwg20d-q7-common: Move pciec node out of common dtsi
ARM: dts: r8a77470: Add I2C4 support
ARM: dts: r8a77470: Add SDHI2 support
ARM: dts: r8a77470: Add SMP support
ARM: dts: R-Car Gen1 board comment update
ARM: dts: Include R-Car Gen2 product name in DTSI files
ARM: dts: r9a06g032: Correct UART and add all other UARTs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 15:41:52 +0000 (17:41 +0200)]
Merge tag 'renesas-arm64-dt2-for-v4.20' of git://git./linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM64 Based SoC DT Updates for v4.20
* Remove unneeded status from thermal nodes
* R-Car Gen 3 SoCs:
- Use 400kHz for I2C DVFS bus
- Revise USB2.0 properties
* R-Car Gen 3 SoC based ULCB boards: Add default bootargs
* R-Car M3-N (r8a77965) SoC based boards: Enable audio with DMA
* R-Car V3M (r8a77970 and V3H (r8a77980) SoCs:
- Add compare match timer (CMT) support
- Add timer pulse unit (TPU) support
* R-Car V3H (r8a77980) and E3 (r8a77990) SoCs:
- Attach the SYS-DMAC to the IPMMU
* E3 (r8a77990) SoC: Add display output support
* R-Car E3 (r8a77990) based Ebisu board:
- Enable HDMI and CVBS input, and VGA and HDMI display output
* R-Car D3 (r8a77995) SoC: Add LVDS support
* R-Car D3 (r8a77995) based Draak board: Enable HDMI display output
* tag 'renesas-arm64-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: r8a77965: Add Sound and Audio DMAC device nodes
arm64: dts: renesas: r8a77995: draak: Enable HDMI display output
arm64: dts: renesas: r8a77990: ebisu: Enable VGA and HDMI outputs
arm64: dts: renesas: r8a77995: Add LVDS support
arm64: dts: renesas: r8a77990: Add display output support
arm64: dts: renesas: r8a779{7|8}0: add TPU support
arm64: dts: renesas: revise properties for R-Car Gen3 SoCs' usb 2.0
arm64: dts: renesas: ulcb: add default bootargs
arm64: dts: renesas: r8a779{7|8}0: add CMT support
arm64: dts: renesas: gen3: use 400kHz for I2C DVFS bus
arm64: dts: renesas: r8a77980: Attach the SYS-DMAC to the IPMMU
arm64: dts: renesas: r8a77990: Attach the SYS-DMAC to the IPMMU
arm64: dts: renesas: ebisu: Add HDMI and CVBS input
arm64: dts: renesas: Remove unneeded status from thermal nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 15:40:06 +0000 (17:40 +0200)]
Merge tag 'tegra-for-4.20-arm64-dt' of git://git./linux/kernel/git/tegra/linux into next/dt
arm64: tegra: Device tree changes for v4.20-rc1
This contains mostly device tree changes to support faster SDHCI modes
on Tegra210 and Tegra186.
* tag 'tegra-for-4.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: I2C on Tegra194 is not compatible with Tegra114
arm64: dts: tegra186: Enable HS400
arm64: dts: tegra210: Enable HS400
arm64: dts: tegra186: Add SDMMC4 DQS trim value
arm64: dts: tegra210: Add SDMMC4 DQS trim value
arm64: dts: tegra186: Assign clocks for sdmmc1 and sdmmc4
arm64: dts: tegra210: Assign clocks for sdmmc1 and sdmmc4
arm64: dts: tegra186: Add SDHCI tap and trim values
arm64: dts: tegra210: Add SDHCI tap and trim values
arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
arm64: dts: tegra210: Add sdmmc pad auto calibration offsets
arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 15:32:55 +0000 (17:32 +0200)]
Merge tag 'tegra-for-4.20-arm-dt' of git://git./linux/kernel/git/tegra/linux into next/dt
ARM: tegra: Device tree changes for v4.20-rc1
This contains a massive amount of changes from Marcel Ziswiler for
various boards by Toradex.
* tag 'tegra-for-4.20-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (129 commits)
ARM: dts: paz00: fix wakeup gpio keycode
ARM: tegra: tegra20: Fix mixed tabs-spaces indentation
ARM: tegra: colibri_t20: add eval board device tree
ARM: tegra: colibri_t20: rename ac97 label to tegra_ac97
ARM: tegra: colibri_t20: get rid of fake clocks simple bus
ARM: tegra: colibri_t20: rename tps6586x@34 and drop unused pmic label
ARM: tegra: colibri_t20: iris: drop unused i2c_ddc label
ARM: tegra: colibri_t20: rename i2c_ddc to hdmi_ddc
ARM: tegra: colibri_t20: drop module level model and compatible
ARM: tegra: colibri_t20: iris: add colibri ssp support
ARM: tegra: colibri_t20: iris: simplify model and compatible properties
ARM: tegra: colibri_t20: simplify model and compatible properties
ARM: tegra: colibri_t20: add compatibility comment
ARM: tegra: colibri_t20: annotate/move sd card detect
ARM: tegra: colibri_t20: add gpio hogs for gmi_wr_n buffers
ARM: tegra: colibri_t20: add gpio hog to unreset usb ethernet chip
ARM: tegra: colibri_t20: add i2c-thermtrip
ARM: tegra: colibri_t20: annotate/rename lm95245 temperature sensor
ARM: tegra: colibri_t20: iris: add dr_mode property
ARM: tegra: colibri_t20: iris: add gpio wakeup key
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 15:31:14 +0000 (17:31 +0200)]
Merge tag 'tegra-for-4.20-dt-bindings' of git://git./linux/kernel/git/tegra/linux into next/dt
dt-bindings: Changes for v4.20-rc1
This contains the PMC pad configuration bindings which are used to
control the voltage of various pads found on Tegra chips. Among other
things this is required to enable faster modes on SDHCI.
* tag 'tegra-for-4.20-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Add Tegra PMC pad configuration bindings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Heiko Stuebner [Sat, 9 Dec 2017 23:11:45 +0000 (00:11 +0100)]
arm64: dts: rockchip: enable display nodes on rk3328-rock64
Enable necessary nodes to get output on the hdmi port of the board.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Heiko Stuebner [Mon, 11 Dec 2017 01:02:01 +0000 (02:02 +0100)]
arm64: dts: rockchip: add rk3328 display nodes
Add the chain of display nodes from the core display-subsystem
through the one vop to the dw-hdmi output.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
changes in v3:
- drop reg from hdmi-in-port
changes in v2:
- remove trailing 0 from vop irq
Heiko Stuebner [Sat, 9 Dec 2017 23:11:14 +0000 (00:11 +0100)]
arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328
The rk3328 uses a hdmiphy from Innosilicon, so add the necessary node
to the rk3328 soc devicetree.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Arnd Bergmann [Fri, 28 Sep 2018 11:02:04 +0000 (13:02 +0200)]
Merge tag 'pxa-dt-4.20' of https://github.com/rjarzmik/linux into next/dt
This device-tree pxa update brings :
- a couple of changes for future pxa2xx platforms
- 2 fixes in RTC and I2C domain
* tag 'pxa-dt-4.20' of https://github.com/rjarzmik/linux:
ARM: dts: pxa: add pincontrol helpers
ARM: dts: pxa: fix power i2c base address
ARM: dts: pxa: fix the rtc controller
ARM: dts: pxa: change serial node names
Signed-off-by: Arnd Bergmann <arnd@arndb.de>