igc: add lock preventing multiple simultaneous PTM transactions

[ Upstream commit 1a931c4f5e6862e61a4b130cb76b422e1415f644 ]

Add a mutex around the PTM transaction to prevent multiple transactors

Multiple processes try to initiate a PTM transaction, one or all may
fail. This can be reproduced by running two instances of the
following:

$ sudo phc2sys -O 0 -i tsn0 -m

PHC2SYS exits with:

"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
 fails

Note: Normally two instance of PHC2SYS will not run, but one process
 should not break another.

Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: cleanup PTP module if probe fails

[ Upstream commit 1f025759ba394dd53e434d2668cb0597886d9b69 ]

Make sure that the PTP module is cleaned up if the igc_probe() fails by
calling igc_ptp_stop() on exit.

Fixes: d89f88419f99 ("igc: Add skeletal frame for Intel(R) 2.5G Ethernet Controller support")
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: handle the IGC_PTP_ENABLED flag correctly

[ Upstream commit 26a3910afd111f7c1a96dace6dc02f3225063896 ]

All functions in igc_ptp.c called from igc_main.c should check the
IGC_PTP_ENABLED flag. Adding check for this flag to stop and reset
functions.

Fixes: 5f2958052c58 ("igc: Add basic skeleton for PTP")
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: move ktime snapshot into PTM retry loop

[ Upstream commit cd7f7328d691937102732f39f97ead35b15bf803 ]

Move ktime_get_snapshot() into the loop. If a retry does occur, a more
recent snapshot will result in a more accurate cross-timestamp.

Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: increase wait time before retrying PTM

[ Upstream commit 714cd033da6fea4cf54a11b3cfd070afde3f31df ]

The i225/i226 hardware retries if it receives an inappropriate response
from the upstream device. If the device retries too quickly, the root
port does not respond.

The wait between attempts was reduced from 10us to 1us in commit
6b8aa753a9f9 ("igc: Decrease PTM short interval from 10 us to 1 us"), which
said:

  With the 10us interval, we were seeing PTM transactions take around
  12us. Hardware team suggested this interval could be lowered to 1us
  which was confirmed with PCIe sniffer. With the 1us interval, PTM
  dialogs took around 2us.

While a 1us short cycle time was thought to be theoretically sufficient, it
turns out in practice it is not quite long enough. It is unclear if the
problem is in the root port or an issue in i225/i226.

Increase the wait from 1us to 4us. Increasing to 2us appeared to work in
practice on the setups we have available. A value of 4us was chosen due to
the limited hardware available for testing, with a goal of ensuring we wait
long enough without overly penalizing the response time when unnecessary.

The issue can be reproduced with the following:

$ sudo phc2sys -R 1000 -O 0 -i tsn0 -m

Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to
quickly reproduce the issue.

PHC2SYS exits with:

"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
  fails

Fixes: 6b8aa753a9f9 ("igc: Decrease PTM short interval from 10 us to 1 us")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: fix PTM cycle trigger logic

[ Upstream commit 8e404ad95d2c10c261e2ef6992c7c12dde03df0e ]

Writing to clear the PTM status 'valid' bit while the PTM cycle is
triggered results in unreliable PTM operation. To fix this, clear the
PTM 'trigger' and status after each PTM transaction.

The issue can be reproduced with the following:

$ sudo phc2sys -R 1000 -O 0 -i tsn0 -m

Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to
quickly reproduce the issue.

PHC2SYS exits with:

"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
  fails

This patch also fixes a hang in igc_probe() when loading the igc
driver in the kdump kernel on systems supporting PTM.

The igc driver running in the base kernel enables PTM trigger in
igc_probe().  Therefore the driver is always in PTM trigger mode,
except in brief periods when manually triggering a PTM cycle.

When a crash occurs, the NIC is reset while PTM trigger is enabled.
Due to a hardware problem, the NIC is subsequently in a bad busmaster
state and doesn't handle register reads/writes.  When running
igc_probe() in the kdump kernel, the first register access to a NIC
register hangs driver probing and ultimately breaks kdump.

With this patch, igc has PTM trigger disabled most of the time,
and the trigger is only enabled for very brief (10 - 100 us) periods
when manually triggering a PTM cycle.  Chances that a crash occurs
during a PTM trigger are not 0, but extremely reduced.

Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()"

[ Upstream commit 0937cb5f345c79d702b4d0d744e2a2529b551cb2 ]

This reverts commit a104042e2bf6528199adb6ca901efe7b60c2c27f.

Since the original bug seems to have been around for years,
but a new issue was report with the fix, revert the fix for
now. We have a couple of weeks to figure it out for this
release, if needed.

Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/linux-wireless/20250410215527.3001-1-spasswolf@web.de
Fixes: a104042e2bf6 ("wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: l2cap: Check encryption key size on incoming connection

[ Upstream commit 522e9ed157e3c21b4dd623c79967f72c21e45b78 ]

This is required for passing GAP/SEC/SEM/BI-04-C PTS test case:
  Security Mode 4 Level 4, Responder - Invalid Encryption Key Size
  - 128 bit

This tests the security key with size from 1 to 15 bytes while the
Security Mode 4 Level 4 requests 16 bytes key size.

Currently PTS fails with the following logs:
- expected:Connection Response:
    Code: [3 (0x03)] Code
    Identifier: (lt)WildCard: Exists(gt)
    Length: [8 (0x0008)]
    Destination CID: (lt)WildCard: Exists(gt)
    Source CID: [64 (0x0040)]
    Result: [3 (0x0003)] Connection refused - Security block
    Status: (lt)WildCard: Exists(gt),
but received:Connection Response:
    Code: [3 (0x03)] Code
    Identifier: [1 (0x01)]
    Length: [8 (0x0008)]
    Destination CID: [64 (0x0040)]
    Source CID: [64 (0x0040)]
    Result: [0 (0x0000)] Connection Successful
    Status: [0 (0x0000)] No further information available

And HCI logs:
< HCI Command: Read Encrypti.. (0x05|0x0008) plen 2
        Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.)
> HCI Event: Command Complete (0x0e) plen 7
      Read Encryption Key Size (0x05|0x0008) ncmd 1
        Status: Success (0x00)
        Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.)
        Key size: 7
> ACL Data RX: Handle 14 flags 0x02 dlen 12
      L2CAP: Connection Request (0x02) ident 1 len 4
        PSM: 4097 (0x1001)
        Source CID: 64
< ACL Data TX: Handle 14 flags 0x00 dlen 16
      L2CAP: Connection Response (0x03) ident 1 len 8
        Destination CID: 64
        Source CID: 64
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)

Fixes: 288c06973daa ("Bluetooth: Enforce key size of 16 bytes on FIPS level")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btrtl: Prevent potential NULL dereference

[ Upstream commit 324dddea321078a6eeb535c2bff5257be74c9799 ]

The btrtl_initialize() function checks that rtl_load_file() either
had an error or it loaded a zero length file.  However, if it loaded
a zero length file then the error code is not set correctly.  It
results in an error pointer vs NULL bug, followed by a NULL pointer
dereference.  This was detected by Smatch:

drivers/bluetooth/btrtl.c:592 btrtl_initialize() warn: passing zero to 'ERR_PTR'

Fixes: 26503ad25de8 ("Bluetooth: btrtl: split the device initialization into smaller parts")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_event: Fix sending MGMT_EV_DEVICE_FOUND for invalid address

[ Upstream commit eb73b5a9157221f405b4fe32751da84ee46b7a25 ]

This fixes sending MGMT_EV_DEVICE_FOUND for invalid address
(00:00:00:00:00:00) which is a regression introduced by
a2ec905d1e16 ("Bluetooth: fix kernel oops in store_pending_adv_report")
since in the attempt to skip storing data for extended advertisement it
actually made the code to skip the entire if statement supposed to send
MGMT_EV_DEVICE_FOUND without attempting to use the last_addr_adv which
is garanteed to be invalid for extended advertisement since we never
store anything on it.

Link: https://github.com/bluez/bluez/issues/1157
Link: https://github.com/bluez/bluez/issues/1149#issuecomment-2767215658
Fixes: a2ec905d1e16 ("Bluetooth: fix kernel oops in store_pending_adv_report")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Silence oversized kvmalloc() warning

[ Upstream commit 9a0e6f15029e1a8a21e40f06fd05aa52b7f063de ]

syzkaller triggered an oversized kvmalloc() warning.
Silence it by adding __GFP_NOWARN.

syzkaller log:
 WARNING: CPU: 7 PID: 518 at mm/util.c:665 __kvmalloc_node_noprof+0x175/0x180
 CPU: 7 UID: 0 PID: 518 Comm: c_repro Not tainted 6.11.0-rc6+ #6
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 RIP: 0010:__kvmalloc_node_noprof+0x175/0x180
 RSP: 0018:ffffc90001e67c10 EFLAGS: 00010246
 RAX: 0000000000000100 RBX: 0000000000000400 RCX: ffffffff8149d46b
 RDX: 0000000000000000 RSI: ffff8881030fae80 RDI: 0000000000000002
 RBP: 000000712c800000 R08: 0000000000000100 R09: 0000000000000000
 R10: ffffc90001e67c10 R11: 0030ae0601000000 R12: 0000000000000000
 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000
 FS:  00007fde79159740(0000) GS:ffff88813bdc0000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000020000180 CR3: 0000000105eb4005 CR4: 00000000003706b0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  ib_umem_odp_get+0x1f6/0x390
  mlx5_ib_reg_user_mr+0x1e8/0x450
  ib_uverbs_reg_mr+0x28b/0x440
  ib_uverbs_write+0x7d3/0xa30
  vfs_write+0x1ac/0x6c0
  ksys_write+0x134/0x170
  ? __sanitizer_cov_trace_pc+0x1c/0x50
  do_syscall_64+0x50/0x110
  entry_SYSCALL_64_after_hwframe+0x76/0x7e

Fixes: 37824952dc8f ("RDMA/odp: Use kvcalloc for the dma_list and page_list")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Link: https://patch.msgid.link/c6cb92379de668be94894f49c2cfa40e73f94d56.1742388096.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs42l43: Reset clamp override on jack removal

[ Upstream commit 5fc7d2b5cab47f2ac712f689140b1fed978fb91c ]

Some of the manually selected jack configurations will disable the
headphone clamp override. Restore this on jack removal, such that
the state is consistent for a new insert.

Fixes: fc918cbe874e ("ASoC: cs42l43: Add support for the cs42l43")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250409120717.1294528-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix wrong maximum DMA segment size

[ Upstream commit 9beb2c91fb86e0be70a5833c6730441fa3c9efa8 ]

Set maximum DMA segment size to 2G instead of UINT_MAX due to HW limit.

Fixes: e0477b34d9d1 ("RDMA: Explicitly pass in the dma_device to ib_register_device")
Link: https://patch.msgid.link/r/20250327114724.3454268-3-huangjunxian6@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/usnic: Fix passing zero to PTR_ERR in usnic_ib_pci_probe()

[ Upstream commit 95ba3850fed03e01b422ab5d7943aeba130c9723 ]

drivers/infiniband/hw/usnic/usnic_ib_main.c:590
 usnic_ib_pci_probe() warn: passing zero to 'PTR_ERR'

Make usnic_ib_device_add() return NULL on fail path, also remove
useless NULL check for usnic_ib_discover_pf()

Fixes: e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver")
Link: https://patch.msgid.link/r/20250324123132.2392077-1-yuehaibing@huawei.com
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ovl: remove unused forward declaration

[ Upstream commit a6eb9a4a69cc360b930dad9dc8513f8fd9b3577f ]

The ovl_get_verity_xattr() function was never added, only its declaration.

Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Fixes: 184996e92e86 ("ovl: Validate verity xattr when resolving lowerdata")
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()

[ Upstream commit 95f723cf141b95e3b3a5b92cf2ea98a863fe7275 ]

devm_kasprintf() returns NULL when memory allocation fails. Currently,
avs_component_probe() does not check for this case, which results in a
NULL pointer dereference.

Fixes: 739c031110da ("ASoC: Intel: avs: Provide support for fallback topology")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20250402141411.44972-1-bsdhenrymartin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dwc: always enable/disable i2s irqs

[ Upstream commit 2b727b3f8a04fe52f55316ccb8792cfd9b2dd05d ]

Commit a42e988 ("ASoC: dwc: add DMA handshake control") changed the
behavior of the driver to not enable or disable i2s irqs if using DMA. This
breaks platforms such as AMD ACP. Audio playback appears to work but no
audio can be heard. Revert to the old behavior by always enabling and
disabling i2s irqs while keeping DMA handshake control.

Fixes: a42e988b626 ("ASoC: dwc: add DMA handshake control")
Signed-off-by: Brady Norander <bradynorander@gmail.com>
Link: https://patch.msgid.link/20250330130852.37881-3-bradynorander@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/md-bitmap: fix stats collection for external bitmaps

[ Upstream commit 6ec1f0239485028445d213d91cfee5242f3211ba ]

The bitmap_get_stats() function incorrectly returns -ENOENT for external
bitmaps.

Remove the external bitmap check as the statistics should be available
regardless of bitmap storage location.

Return -EINVAL only for invalid bitmap with no storage (neither in
superblock nor in external file).

Note: "bitmap_info.external" here refers to a bitmap stored in a separate
file (bitmap_file), not to external metadata.

Fixes: 8d28d0ddb986 ("md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Link: https://lore.kernel.org/linux-raid/20250403015322.2873369-1-zhengqixing@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid10: fix missing discard IO accounting

[ Upstream commit d05af90d6218e9c8f1c2026990c3f53c1b41bfb0 ]

md_account_bio() is not called from raid10_handle_discard(), now that we
handle bitmap inside md_account_bio(), also fix missing
bitmap_startwrite for discard.

Test whole disk discard for 20G raid10:

Before:
Device   d/s     dMB/s   drqm/s  %drqm d_await dareq-sz
md0    48.00     16.00     0.00   0.00    5.42   341.33

After:
Device   d/s     dMB/s   drqm/s  %drqm d_await dareq-sz
md0    68.00  20462.00     0.00   0.00    2.65 308133.65

Link: https://lore.kernel.org/linux-raid/20250325015746.3195035-1-yukuai1@huaweicloud.com
Fixes: 528bc2cf2fcc ("md/raid10: enable io accounting")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Coly Li <colyli@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Fix missing scsi_host_put() in error path

[ Upstream commit 72eea84a1092b50a10eeecfeba4b28ac9f1312ab ]

Add goto to ensure scsi_host_put() is called in all error paths of
iscsi_set_host_param() function. This fixes a potential memory leak when
strlen() check fails.

Fixes: ce51c8170084 ("scsi: iscsi: Add strlen() check in iscsi_if_set{_host}_param()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250318094344.91776-1-linmq006@gmail.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: wl1251: fix memory leak in wl1251_tx_work

[ Upstream commit a0f0dc96de03ffeefc2a177b7f8acde565cb77f4 ]

The skb dequeued from tx_queue is lost when wl1251_ps_elp_wakeup fails
with a -ETIMEDOUT error. Fix that by queueing the skb back to tx_queue.

Fixes: c5483b719363 ("wl12xx: check if elp wakeup failed")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Michael Nemanov <michael.nemanov@ti.com>
Link: https://patch.msgid.link/20250330104532.44935-1-abdun.nihaal@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: Purge vif txq in ieee80211_do_stop()

[ Upstream commit 378677eb8f44621ecc9ce659f7af61e5baa94d81 ]

After ieee80211_do_stop() SKB from vif's txq could still be processed.
Indeed another concurrent vif schedule_and_wake_txq call could cause
those packets to be dequeued (see ieee80211_handle_wake_tx_queue())
without checking the sdata current state.

Because vif.drv_priv is now cleared in this function, this could lead to
driver crash.

For example in ath12k, ahvif is store in vif.drv_priv. Thus if
ath12k_mac_op_tx() is called after ieee80211_do_stop(), ahvif->ah can be
NULL, leading the ath12k_warn(ahvif->ah,...) call in this function to
trigger the NULL deref below.

  Unable to handle kernel paging request at virtual address dfffffc000000001
  KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
  batman_adv: bat0: Interface deactivated: brbh1337
  Mem abort info:
    ESR = 0x0000000096000004
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
    FSC = 0x04: level 0 translation fault
  Data abort info:
    ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
    CM = 0, WnR = 0, TnD = 0, TagAccess = 0
    GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
  [dfffffc000000001] address between user and kernel address ranges
  Internal error: Oops: 0000000096000004 [#1] SMP
  CPU: 1 UID: 0 PID: 978 Comm: lbd Not tainted 6.13.0-g633f875b8f1e #114
  Hardware name: HW (DT)
  pstate: 10000005 (nzcV daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k]
  lr : ath12k_mac_op_tx+0x174/0x29b8 [ath12k]
  sp : ffffffc086ace450
  x29: ffffffc086ace450 x28: 0000000000000000 x27: 1ffffff810d59ca4
  x26: ffffff801d05f7c0 x25: 0000000000000000 x24: 000000004000001e
  x23: ffffff8009ce4926 x22: ffffff801f9c0800 x21: ffffff801d05f7f0
  x20: ffffff8034a19f40 x19: 0000000000000000 x18: ffffff801f9c0958
  x17: ffffff800bc0a504 x16: dfffffc000000000 x15: ffffffc086ace4f8
  x14: ffffff801d05f83c x13: 0000000000000000 x12: ffffffb003a0bf03
  x11: 0000000000000000 x10: ffffffb003a0bf02 x9 : ffffff8034a19f40
  x8 : ffffff801d05f818 x7 : 1ffffff0069433dc x6 : ffffff8034a19ee0
  x5 : ffffff801d05f7f0 x4 : 0000000000000000 x3 : 0000000000000001
  x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000008
  Call trace:
   ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] (P)
   ieee80211_handle_wake_tx_queue+0x16c/0x260
   ieee80211_queue_skb+0xeec/0x1d20
   ieee80211_tx+0x200/0x2c8
   ieee80211_xmit+0x22c/0x338
   __ieee80211_subif_start_xmit+0x7e8/0xc60
   ieee80211_subif_start_xmit+0xc4/0xee0
   __ieee80211_subif_start_xmit_8023.isra.0+0x854/0x17a0
   ieee80211_subif_start_xmit_8023+0x124/0x488
   dev_hard_start_xmit+0x160/0x5a8
   __dev_queue_xmit+0x6f8/0x3120
   br_dev_queue_push_xmit+0x120/0x4a8
   __br_forward+0xe4/0x2b0
   deliver_clone+0x5c/0xd0
   br_flood+0x398/0x580
   br_dev_xmit+0x454/0x9f8
   dev_hard_start_xmit+0x160/0x5a8
   __dev_queue_xmit+0x6f8/0x3120
   ip6_finish_output2+0xc28/0x1b60
   __ip6_finish_output+0x38c/0x638
   ip6_output+0x1b4/0x338
   ip6_local_out+0x7c/0xa8
   ip6_send_skb+0x7c/0x1b0
   ip6_push_pending_frames+0x94/0xd0
   rawv6_sendmsg+0x1a98/0x2898
   inet_sendmsg+0x94/0xe0
   __sys_sendto+0x1e4/0x308
   __arm64_sys_sendto+0xc4/0x140
   do_el0_svc+0x110/0x280
   el0_svc+0x20/0x60
   el0t_64_sync_handler+0x104/0x138
   el0t_64_sync+0x154/0x158

To avoid that, empty vif's txq at ieee80211_do_stop() so no packet could
be dequeued after ieee80211_do_stop() (new packets cannot be queued
because SDATA_STATE_RUNNING is cleared at this point).

Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://patch.msgid.link/ff7849e268562456274213c0476e09481a48f489.1742833382.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()

[ Upstream commit a104042e2bf6528199adb6ca901efe7b60c2c27f ]

The ieee80211 skb control block key (set when skb was queued) could have
been removed before ieee80211_tx_dequeue() call. ieee80211_tx_dequeue()
already called ieee80211_tx_h_select_key() to get the current key, but
the latter do not update the key in skb control block in case it is
NULL. Because some drivers actually use this key in their TX callbacks
(e.g. ath1{1,2}k_mac_op_tx()) this could lead to the use after free
below:

  BUG: KASAN: slab-use-after-free in ath11k_mac_op_tx+0x590/0x61c
  Read of size 4 at addr ffffff803083c248 by task kworker/u16:4/1440

  CPU: 3 UID: 0 PID: 1440 Comm: kworker/u16:4 Not tainted 6.13.0-ge128f627f404 #2
  Hardware name: HW (DT)
  Workqueue: bat_events batadv_send_outstanding_bcast_packet
  Call trace:
   show_stack+0x14/0x1c (C)
   dump_stack_lvl+0x58/0x74
   print_report+0x164/0x4c0
   kasan_report+0xac/0xe8
   __asan_report_load4_noabort+0x1c/0x24
   ath11k_mac_op_tx+0x590/0x61c
   ieee80211_handle_wake_tx_queue+0x12c/0x1c8
   ieee80211_queue_skb+0xdcc/0x1b4c
   ieee80211_tx+0x1ec/0x2bc
   ieee80211_xmit+0x224/0x324
   __ieee80211_subif_start_xmit+0x85c/0xcf8
   ieee80211_subif_start_xmit+0xc0/0xec4
   dev_hard_start_xmit+0xf4/0x28c
   __dev_queue_xmit+0x6ac/0x318c
   batadv_send_skb_packet+0x38c/0x4b0
   batadv_send_outstanding_bcast_packet+0x110/0x328
   process_one_work+0x578/0xc10
   worker_thread+0x4bc/0xc7c
   kthread+0x2f8/0x380
   ret_from_fork+0x10/0x20

  Allocated by task 1906:
   kasan_save_stack+0x28/0x4c
   kasan_save_track+0x1c/0x40
   kasan_save_alloc_info+0x3c/0x4c
   __kasan_kmalloc+0xac/0xb0
   __kmalloc_noprof+0x1b4/0x380
   ieee80211_key_alloc+0x3c/0xb64
   ieee80211_add_key+0x1b4/0x71c
   nl80211_new_key+0x2b4/0x5d8
   genl_family_rcv_msg_doit+0x198/0x240
  <...>

  Freed by task 1494:
   kasan_save_stack+0x28/0x4c
   kasan_save_track+0x1c/0x40
   kasan_save_free_info+0x48/0x94
   __kasan_slab_free+0x48/0x60
   kfree+0xc8/0x31c
   kfree_sensitive+0x70/0x80
   ieee80211_key_free_common+0x10c/0x174
   ieee80211_free_keys+0x188/0x46c
   ieee80211_stop_mesh+0x70/0x2cc
   ieee80211_leave_mesh+0x1c/0x60
   cfg80211_leave_mesh+0xe0/0x280
   cfg80211_leave+0x1e0/0x244
  <...>

Reset SKB control block key before calling ieee80211_tx_h_select_key()
to avoid that.

Fixes: bb42f2d13ffc ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://patch.msgid.link/06aa507b853ca385ceded81c18b0a6dd0f081bc8.1742833382.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: at76c50x: fix use after free access in at76_disconnect

[ Upstream commit 27c7e63b3cb1a20bb78ed4a36c561ea4579fd7da ]

The memory pointed to by priv is freed at the end of at76_delete_device
function (using ieee80211_free_hw). But the code then accesses the udev
field of the freed object to put the USB device. This may also lead to a
memory leak of the usb device. Fix this by using udev from interface.

Fixes: 29e20aa6c6af ("at76c50x-usb: fix use after free on failure path in at76_probe()")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Link: https://patch.msgid.link/20250330103110.44080-1-abdun.nihaal@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Enable force phy when SATA disk directly connected

[ Upstream commit 8aa580cd92843b60d4d6331f3b0a9e8409bb70eb ]

when a SATA disk is directly connected the SAS controller determines the
disk to which I/Os are delivered based on the port ID in the DQ entry.

When many phys are disconnected and reconnect, the port ID of phys were
changed and used by other link, resulting in I/O being sent to incorrect
disk. Data inconsistency on the SATA disk may occur during I/O retries
using the old port ID. So enable force phy, then force the command to be
executed in a certain phy, and if the actual phy ID of the port does not
match the phy configured in the command, the chip will stop delivering the
I/O to disk.

Fixes: ce60689e12dd ("scsi: hisi_sas: add v3 code to send ATA frame")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20250312095135.3048379-2-yangxingui@huawei.com
Reviewed-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HSI: ssi_protocol: Fix use after free vulnerability in ssi_protocol Driver Due to Race Condition

commit e3f88665a78045fe35c7669d2926b8d97b892c11 upstream.

In the ssi_protocol_probe() function, &ssi->work is bound with
ssip_xmit_work(), In ssip_pn_setup(), the ssip_pn_xmit() function
within the ssip_pn_ops structure is capable of starting the
work.

If we remove the module which will call ssi_protocol_remove()
to make a cleanup, it will free ssi through kfree(ssi),
while the work mentioned above will be used. The sequence
of operations that may lead to a UAF bug is as follows:

CPU0                                    CPU1

                        | ssip_xmit_work
ssi_protocol_remove     |
kfree(ssi);             |
                        | struct hsi_client *cl = ssi->cl;
                        | // use ssi

Fix it by ensuring that the work is canceled before proceeding
with the cleanup in ssi_protocol_remove().

Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240918120749.1730-1-kxwang23@m.fudan.edu.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_uart: Fix another race during initialization

commit 5df5dafc171b90d0b8d51547a82657cd5a1986c7 upstream.

Do not set 'HCI_UART_PROTO_READY' before call 'hci_uart_register_dev()'.
Possible race is when someone calls 'hci_tty_uart_close()' after this bit
is set, but 'hci_uart_register_dev()' wasn't done. This leads to access
to uninitialized fields. To fix it let's set this bit after device was
registered (as before patch c411c62cc133) and to fix previous problem let's
add one more bit in addition to 'HCI_UART_PROTO_READY' which allows to
perform power up without original bit set (pls see commit c411c62cc133).

Crash backtrace from syzbot report:

RIP: 0010:skb_queue_empty_lockless include/linux/skbuff.h:1887 [inline]
RIP: 0010:skb_queue_purge_reason+0x6d/0x140 net/core/skbuff.c:3936

Call Trace:
 <TASK>
 skb_queue_purge include/linux/skbuff.h:3364 [inline]
 mrvl_close+0x2f/0x90 drivers/bluetooth/hci_mrvl.c:100
 hci_uart_tty_close+0xb6/0x120 drivers/bluetooth/hci_ldisc.c:557
 tty_ldisc_close drivers/tty/tty_ldisc.c:455 [inline]
 tty_ldisc_kill+0x66/0xc0 drivers/tty/tty_ldisc.c:613
 tty_ldisc_release+0xc9/0x120 drivers/tty/tty_ldisc.c:781
 tty_release_struct+0x10/0x80 drivers/tty/tty_io.c:1690
 tty_release+0x4ef/0x640 drivers/tty/tty_io.c:1861
 __fput+0x86/0x2a0 fs/file_table.c:450
 task_work_run+0x82/0xb0 kernel/task_work.c:239
 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
 exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
 __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
 syscall_exit_to_user_mode+0xa3/0x1b0 kernel/entry/common.c:218
 do_syscall_64+0x9a/0x190 arch/x86/entry/common.c:89
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reported-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Tested-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/d159c57f-8490-4c26-79da-6ad3612c4a14@salutedevices.com/
Fixes: 366ceff495f9 ("Bluetooth: hci_uart: fix race during initialization")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mediatek: vcodec: mark vdec_vp9_slice_map_counts_eob_coef noinline

commit 8b55f8818900c99dd4f55a59a103f5b29e41eb2c upstream.

With KASAN enabled, clang fails to optimize the inline version of
vdec_vp9_slice_map_counts_eob_coef() properly, leading to kilobytes
of temporary values spilled to the stack:

drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c:1526:12: error: stack frame size (2160) exceeds limit (2048) in 'vdec_vp9_slice_update_prob' [-Werror,-Wframe-larger-than]

This seems to affect all versions of clang including the latest (clang-20),
but the degree of stack overhead is different per release.

Marking the function as noinline_for_stack is harmless here and avoids
the problem completely.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/e820: Fix handling of subpage regions when calculating nosave ranges in e820__register_nosave_regions()

commit f2f29da9f0d4367f6ff35e0d9d021257bb53e273 upstream.

While debugging kexec/hibernation hangs and crashes, it turned out that
the current implementation of e820__register_nosave_regions() suffers from
multiple serious issues:

 - The end of last region is tracked by PFN, causing it to find holes
   that aren't there if two consecutive subpage regions are present

 - The nosave PFN ranges derived from holes are rounded out (instead of
   rounded in) which makes it inconsistent with how explicitly reserved
   regions are handled

Fix this by:

 - Treating reserved regions as if they were holes, to ensure consistent
   handling (rounding out nosave PFN ranges is more correct as the
   kernel does not use partial pages)

 - Tracking the end of the last RAM region by address instead of pages
   to detect holes more precisely

These bugs appear to have been introduced about ~18 years ago with the very
first version of e820_mark_nosave_regions(), and its flawed assumptions were
carried forward uninterrupted through various waves of rewrites and renames.

[ mingo: Added Git archeology details, for kicks and giggles. ]

Fixes: e8eff5ac294e ("[PATCH] Make swsusp avoid memory holes and reserved memory regions on x86_64")
Reported-by: Roberto Ricci <io@r-ricci.it>
Tested-by: Roberto Ricci <io@r-ricci.it>
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250406-fix-e820-nosave-v3-1-f3787bc1ee1d@qtmlabs.xyz
Closes: https://lore.kernel.org/all/Z4WFjBVHpndct7br@desktop0a/
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommufd: Fail replace if device has not been attached

commit 55c85fa7579dc2e3f5399ef5bad67a44257c1a48 upstream.

The current implementation of iommufd_device_do_replace() implicitly
assumes that the input device has already been attached. However, there
is no explicit check to verify this assumption. If another device within
the same group has been attached, the replace operation might succeed,
but the input device itself may not have been attached yet.

As a result, the input device might not be tracked in the
igroup->device_list, and its reserved IOVA might not be added. Despite
this, the caller might incorrectly assume that the device has been
successfully replaced, which could lead to unexpected behavior or errors.

To address this issue, add a check to ensure that the input device has
been attached before proceeding with the replace operation. This check
will help maintain the integrity of the device tracking system and prevent
potential issues arising from incorrect assumptions about the device's
attachment status.

Fixes: e88d4ec154a8 ("iommufd: Add iommufd_device_replace()")
Link: https://patch.msgid.link/r/20250306034842.5950-1-yi.l.liu@intel.com
Cc: stable@vger.kernel.org
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: platform-profile: Fix CFI violation when accessing sysfs files

commit dd4f730b557ce701a2cd4f604bf1e57667bd8b6e upstream.

When an attribute group is created with sysfs_create_group(), the
->sysfs_ops() callback is set to kobj_sysfs_ops, which sets the ->show()
and ->store() callbacks to kobj_attr_show() and kobj_attr_store()
respectively. These functions use container_of() to get the respective
callback from the passed attribute, meaning that these callbacks need to
be of the same type as the callbacks in 'struct kobj_attribute'.

However, ->show() and ->store() in the platform_profile driver are
defined for struct device_attribute with the help of DEVICE_ATTR_RO()
and DEVICE_ATTR_RW(), which results in a CFI violation when accessing
platform_profile or platform_profile_choices under /sys/firmware/acpi
because the types do not match:

  CFI failure at kobj_attr_show+0x19/0x30 (target: platform_profile_choices_show+0x0/0x140; expected type: 0x7a69590c)

There is no functional issue from the type mismatch because the layout
of 'struct kobj_attribute' and 'struct device_attribute' are the same,
so the container_of() cast does not break anything aside from CFI.

Change the type of platform_profile_choices_show() and
platform_profile_{show,store}() to match the callbacks in
'struct kobj_attribute' and update the attribute variables to
match, which resolves the CFI violation.

Cc: All applicable <stable@vger.kernel.org>
Fixes: a2ff95e018f1 ("ACPI: platform: Add platform profile support")
Reported-by: John Rowley <lkml@johnrowley.me>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2047
Tested-by: John Rowley <lkml@johnrowley.me>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20250210-acpi-platform_profile-fix-cfi-violation-v3-1-ed9e9901c33a@kernel.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[nathan: Fix conflicts in older stable branches]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT

commit 22cc5ca5de52bbfc36a7d4a55323f91fb4492264 upstream.

CONFIG_PARAVIRT_XXL is mainly defined/used by XEN PV guests. For
other VM guest types, features supported under CONFIG_PARAVIRT
are self sufficient. CONFIG_PARAVIRT mainly provides support for
TLB flush operations and time related operations.

For TDX guest as well, paravirt calls under CONFIG_PARVIRT meets
most of its requirement except the need of HLT and SAFE_HLT
paravirt calls, which is currently defined under
CONFIG_PARAVIRT_XXL.

Since enabling CONFIG_PARAVIRT_XXL is too bloated for TDX guest
like platforms, move HLT and SAFE_HLT paravirt calls under
CONFIG_PARAVIRT.

Moving HLT and SAFE_HLT paravirt calls are not fatal and should not
break any functionality for current users of CONFIG_PARAVIRT.

Fixes: bfe6ed0c6727 ("x86/tdx: Add HLT support for TDX guests")
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Ryan Afranji <afranji@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250228014416.3925664-2-vannapurve@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists

commit a5951389e58d2e816eed3dbec5877de9327fd881 upstream.

When comparing to the ARM list [1], it appears that several ARM cores
were missing from the lists in spectre_bhb_loop_affected(). Add them.

NOTE: for some of these cores it may not matter since other ways of
clearing the BHB may be used (like the CLRBHB instruction or ECBHB),
but it still seems good to have all the info from ARM's whitepaper
included.

[1] https://developer.arm.com/Arm%20Security%20Center/Spectre-BHB

Fixes: 558c303c9734 ("arm64: Mitigate spectre style branch history side channels")
Cc: stable@vger.kernel.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20250107120555.v4.5.I4a9a527e03f663040721c5401c41de587d015c82@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: mptcp: fix incorrect fd checks in main_loop

commit 7335d4ac812917c16e04958775826d12d481c92d upstream.

Fix a bug where the code was checking the wrong file descriptors
when opening the input files. The code was checking 'fd' instead
of 'fd_in', which could lead to incorrect error handling.

Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Fixes: ca7ae8916043 ("selftests: mptcp: mptfo Initiator/Listener")
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-2-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: mptcp: close fd_in before returning in main_loop

commit c183165f87a486d5879f782c05a23c179c3794ab upstream.

The file descriptor 'fd_in' is opened when cfg_input is configured, but
not closed in main_loop(), this patch fixes it.

Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Co-developed-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-3-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: qcom: Clear latched interrupt status when changing IRQ type

commit e225128c3f8be879e7d4eb71a25949e188b420ae upstream.

When submitting the TLMM test driver, Bjorn reported that some of the test
cases are failing for GPIOs that not are backed by PDC (i.e. "non-wakeup"
GPIOs that are handled directly in pinctrl-msm). Basically, lingering
latched interrupt state is still being delivered at IRQ request time, e.g.:

  ok 1 tlmm_test_silent_rising
  tlmm_test_silent_falling: ASSERTION FAILED at drivers/pinctrl/qcom/tlmm-test.c:178
  Expected atomic_read(&priv->intr_count) == 0, but
      atomic_read(&priv->intr_count) == 1 (0x1)
  not ok 2 tlmm_test_silent_falling
  tlmm_test_silent_low: ASSERTION FAILED at drivers/pinctrl/qcom/tlmm-test.c:178
  Expected atomic_read(&priv->intr_count) == 0, but
      atomic_read(&priv->intr_count) == 1 (0x1)
  not ok 3 tlmm_test_silent_low
  ok 4 tlmm_test_silent_high

Whether to report interrupts that came in while the IRQ was unclaimed
doesn't seem to be well-defined in the Linux IRQ API. However, looking
closer at these specific cases, we're actually reporting events that do not
match the interrupt type requested by the driver:

 1. After "ok 1 tlmm_test_silent_rising", the GPIO is in low state and
    configured for IRQF_TRIGGER_RISING.

 2. (a) In preparation for "tlmm_test_silent_falling", the GPIO is switched
        to high state. The rising interrupt gets latched.
    (b) The GPIO is re-configured for IRQF_TRIGGER_FALLING, but the latched
        interrupt isn't cleared.
    (c) The IRQ handler is called for the latched interrupt, but there
        wasn't any falling edge.

 3. (a) For "tlmm_test_silent_low", the GPIO remains in high state.
    (b) The GPIO is re-configured for IRQF_TRIGGER_LOW. This seems to
        result in a phantom interrupt that gets latched.
    (c) The IRQ handler is called for the latched interrupt, but the GPIO
        isn't in low state.

 4. (a) For "tlmm_test_silent_high", the GPIO is switched to low state.
    (b) This doesn't result in a latched interrupt, because RAW_STATUS_EN
        was cleared when masking the level-triggered interrupt.

Fix this by clearing the interrupt state whenever making any changes to the
interrupt configuration. This includes previously disabled interrupts, but
also any changes to interrupt polarity or detection type.

With this change, all 16 test cases are now passing for the non-wakeup
GPIOs in the TLMM.

Cc: stable@vger.kernel.org
Fixes: cf9d052aa600 ("pinctrl: qcom: Don't clear pending interrupts when enabling")
Reported-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Closes: https://lore.kernel.org/r/20250227-tlmm-test-v1-1-d18877b4a5db@oss.qualcomm.com/
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/20250312-pinctrl-msm-type-latch-v1-1-ce87c561d3d7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: freescale: imx8m-pcie: assert phy reset and perst in power off

commit aecb63e88c5e5fb9afb782a1577264c76f179af9 upstream.

Ensure the PHY reset and perst is asserted during power-off to
guarantee it is in a reset state upon repeated power-on calls. This
resolves an issue where the PHY may not properly initialize during
subsequent power-on cycles. Power-on will deassert the reset at the
appropriate time after tuning the PHY parameters.

During suspend/resume cycles, we observed that the PHY PLL failed to
lock during resume when the CPU temperature increased from 65C to 75C.
The observed errors were:
  phy phy-32f00000.pcie-phy.3: phy poweron failed --> -110
  imx6q-pcie 33800000.pcie: waiting for PHY ready timeout!
  imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x80 returns -110
  imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110

This resulted in a complete CPU freeze, which is resolved by ensuring
the PHY is in reset during power-on, thus preventing PHY PLL failures.

Cc: stable@vger.kernel.org
Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250305144355.20364-3-eichest@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Fix reference leak in pci_alloc_child_bus()

commit 1f2768b6a3ee77a295106e3a5d68458064923ede upstream.

If device_register(&child->dev) fails, call put_device() to explicitly
release child->dev, per the comment at device_register().

Found by code review.

Link: https://lore.kernel.org/r/20250202062357.872971-1-make24@iscas.ac.cn
Fixes: 4f535093cf8f ("PCI: Put pci_dev in device tree as early as possible")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: brcmstb: Fix missing of_node_put() in brcm_pcie_probe()

commit 2df181e1aea4628a8fd257f866026625d0519627 upstream.

A call to of_parse_phandle() is incrementing the refcount, and as such,
the of_node_put() must be called when the reference is no longer needed.

Thus, refactor the existing code and add a missing of_node_put() call
following the check to ensure that "msi_np" matches "pcie->np" and after
MSI initialization, but only if the MSI support is enabled system-wide.

Cc: stable@vger.kernel.org # v5.10+
Fixes: 40ca1bf580ef ("PCI: brcmstb: Add MSI support")
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250122222955.1752778-1-svarbanov@suse.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of/irq: Fix device node refcount leakages in of_irq_init()

commit 708124d9e6e7ac5ebf927830760679136b23fdf0 upstream.

of_irq_init() will leak interrupt controller device node refcounts
in two places as explained below:

1) Leak refcounts of both @desc->dev and @desc->interrupt_parent when
   suffers @desc->irq_init_cb() failure.
2) Leak refcount of @desc->interrupt_parent when cleans up list
   @intc_desc_list in the end.

Refcounts of both @desc->dev and @desc->interrupt_parent were got in
the first loop, but of_irq_init() does not put them before kfree(@desc)
in places mentioned above, so causes refcount leakages.

Fix by putting refcounts involved before kfree(@desc).

Fixes: 8363ccb917c6 ("of/irq: add missing of_node_put")
Fixes: c71a54b08201 ("of/irq: introduce of_irq_init")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-7-93e3a2659aa7@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of/irq: Fix device node refcount leakage in API irq_of_parse_and_map()

commit 962a2805e47b933876ba0e4c488d9e89ced2dd29 upstream.

In irq_of_parse_and_map(), refcount of device node @oirq.np was got
by successful of_irq_parse_one() invocation, but it does not put the
refcount before return, so causes @oirq.np refcount leakage.

Fix by putting @oirq.np refcount before return.

Fixes: e3873444990d ("of/irq: Move irq_of_parse_and_map() to common code")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-6-93e3a2659aa7@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of/irq: Fix device node refcount leakages in of_irq_count()

commit bbf71f44aaf241d853759a71de7e7ebcdb89be3d upstream.

of_irq_count() invokes of_irq_parse_one() to count IRQs, and successful
invocation of the later will get device node @irq.np refcount, but the
former does not put the refcount before next iteration invocation, hence
causes device node refcount leakages.

Fix by putting @irq.np refcount before the next iteration invocation.

Fixes: 3da5278727a8 ("of/irq: Rework of_irq_count()")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-5-93e3a2659aa7@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of/irq: Fix device node refcount leakage in API of_irq_parse_raw()

commit ff93e7213d6cc8d9a7b0bc64f70ed26094e168f3 upstream.

if the node @out_irq->np got by of_irq_parse_raw() is a combo node which
consists of both controller and nexus, namely, of_irq_parse_raw() returns
due to condition (@ipar == @newpar), then the node's refcount was increased
twice, hence causes refcount leakage.

Fix by putting @out_irq->np refcount before returning due to the condition.
Also add comments about refcount of node @out_irq->np got by the API.

Fixes: 041284181226 ("of/irq: Allow matching of an interrupt-map local to an interrupt controller")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-4-93e3a2659aa7@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of/irq: Fix device node refcount leakage in API of_irq_parse_one()

commit 0cb58d6c7b558a69957fabe159bfb184196e1e8d upstream.

of_irq_parse_one(@int_gen_dev, i, ...) will leak refcount of @i_th_phandle

int_gen_dev {
    ...
    interrupts-extended = ..., <&i_th_phandle ...>, ...;
    ...
};

Refcount of @i_th_phandle is increased by of_parse_phandle_with_args()
but is not decreased by API of_irq_parse_one() before return, so causes
refcount leakage.

Rework the refcounting to use __free() cleanup and simplify the code to
have a single call to of_irq_parse_raw().

Also add comments about refcount of node @out_irq->np got by the API.

Fixes: 79d9701559a9 ("of/irq: create interrupts-extended property")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-2-93e3a2659aa7@quicinc.com
[robh: Use __free() to do puts]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntb: use 64-bit arithmetic for the MSI doorbell mask

commit fd5625fc86922f36bedee5846fefd647b7e72751 upstream.

msi_db_mask is of type 'u64', still the standard 'int' arithmetic is
performed to compute its value.

While most of the ntb_hw drivers actually don't utilize the higher 32
bits of the doorbell mask now, this may be the case for Switchtec - see
switchtec_ntb_init_db().

Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.

Fixes: 2b0569b3b7e6 ("NTB: Add MSI interrupt support to ntb_transport")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses

commit ef01cac401f18647d62720cf773d7bb0541827da upstream.

Acquire a lock on kvm->srcu when userspace is getting MP state to handle a
rather extreme edge case where "accepting" APIC events, i.e. processing
pending INIT or SIPI, can trigger accesses to guest memory.  If the vCPU
is in L2 with INIT *and* a TRIPLE_FAULT request pending, then getting MP
state will trigger a nested VM-Exit by way of ->check_nested_events(), and
emuating the nested VM-Exit can access guest memory.

The splat was originally hit by syzkaller on a Google-internal kernel, and
reproduced on an upstream kernel by hacking the triple_fault_event_test
selftest to stuff a pending INIT, store an MSR on VM-Exit (to generate a
memory access on VMX), and do vcpu_mp_state_get() to trigger the scenario.

  =============================
  WARNING: suspicious RCU usage
  6.14.0-rc3-b112d356288b-vmx/pi_lockdep_false_pos-lock #3 Not tainted
  -----------------------------
  include/linux/kvm_host.h:1058 suspicious rcu_dereference_check() usage!

  other info that might help us debug this:

  rcu_scheduler_active = 2, debug_locks = 1
  1 lock held by triple_fault_ev/1256:
   #0: ffff88810df5a330 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x8b/0x9a0 [kvm]

  stack backtrace:
  CPU: 11 UID: 1000 PID: 1256 Comm: triple_fault_ev Not tainted 6.14.0-rc3-b112d356288b-vmx #3
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  Call Trace:
   <TASK>
   dump_stack_lvl+0x7f/0x90
   lockdep_rcu_suspicious+0x144/0x190
   kvm_vcpu_gfn_to_memslot+0x156/0x180 [kvm]
   kvm_vcpu_read_guest+0x3e/0x90 [kvm]
   read_and_check_msr_entry+0x2e/0x180 [kvm_intel]
   __nested_vmx_vmexit+0x550/0xde0 [kvm_intel]
   kvm_check_nested_events+0x1b/0x30 [kvm]
   kvm_apic_accept_events+0x33/0x100 [kvm]
   kvm_arch_vcpu_ioctl_get_mpstate+0x30/0x1d0 [kvm]
   kvm_vcpu_ioctl+0x33e/0x9a0 [kvm]
   __x64_sys_ioctl+0x8b/0xb0
   do_syscall_64+0x6c/0x170
   entry_SYSCALL_64_after_hwframe+0x4b/0x53
   </TASK>

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250401150504.829812-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Explicitly zero-initialize on-stack CPUID unions

commit bc52ae0a708cb6fa3926d11c88e3c55e1171b4a1 upstream.

Explicitly zero/empty-initialize the unions used for PMU related CPUID
entries, instead of manually zeroing all fields (hopefully), or in the
case of 0x80000022, relying on the compiler to clobber the uninitialized
bitfields.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-ID: <20250315024102.2361628-1-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gve: handle overflow when reporting TX consumed descriptors

commit 15970e1b23f5c25db88c613fddf9131de086f28e upstream.

When the tx tail is less than the head (in cases of wraparound), the TX
consumed descriptor statistic in DQ will be reported as
UINT32_MAX - head + tail, which is incorrect. Mask the difference of
head and tail according to the ring size when reporting the statistic.

Cc: stable@vger.kernel.org
Fixes: 2c9198356d56 ("gve: Add consumed counts to ethtool stats")
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402001037.2717315-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: zynq: Fix wakeup source leaks on device unbind

commit c5672e310ad971d408752fce7596ed27adc6008f upstream.

Device can be unbound, so driver must also release memory for the wakeup
source.

Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406202245.53854-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: tegra186: fix resource handling in ACPI probe path

commit 8323f3a69de6f6e96bf22f32dd8e2920766050c2 upstream.

When the Tegra186 GPIO controller is probed through ACPI matching,
the driver emits two error messages during probing:
  "tegra186-gpio NVDA0508:00: invalid resource (null)"
  "tegra186-gpio NVDA0508:00: invalid resource (null)"

Fix this by getting resource first and then do the ioremap.

Fixes: 2606e7c9f5fc ("gpio: tegra186: Add ACPI support")
Cc: stable@vger.kernel.org
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250327032349.78809-1-kanie@linux.alibaba.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Add cond_resched() to ftrace_graph_set_hash()

commit 42ea22e754ba4f2b86f8760ca27f6f71da2d982c upstream.

When the kernel contains a large number of functions that can be traced,
the loop in ftrace_graph_set_hash() may take a lot of time to execute.
This may trigger the softlockup watchdog.

Add cond_resched() within the loop to allow the kernel to remain
responsive even when processing a large number of functions.

This matches the cond_resched() that is used in other locations of the
code that iterates over all functions that can be traced.

Cc: stable@vger.kernel.org
Fixes: b9b0c831bed26 ("ftrace: Convert graph filter to use hash tables")
Link: https://lore.kernel.org/tencent_3E06CE338692017B5809534B9C5C03DA7705@qq.com
Signed-off-by: zhoumin <teczm@foxmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: coresight: qcom,coresight-tpdm: Fix too many 'reg'

commit 1e4e454223f770748775f211455513c79cb3121e upstream.

Binding listed variable number of IO addresses without defining them,
however example DTS code, all in-tree DTS and Linux kernel driver
mention only one address space, so drop the second to make binding
precise and correctly describe the hardware.

Fixes: 6c781a35133d ("dt-bindings: arm: Add CoreSight TPDM hardware")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250226112914.94361-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: coresight: qcom,coresight-tpda: Fix too many 'reg'

commit d72deaf05ac18e421d7e52a6be8966fd6ee185f4 upstream.

Binding listed variable number of IO addresses without defining them,
however example DTS code, all in-tree DTS and Linux kernel driver
mention only one address space, so drop the second to make binding
precise and correctly describe the hardware.

Fixes: a8fbe1442c2b ("dt-bindings: arm: Adds CoreSight TPDA hardware definitions")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250226112914.94361-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm-verity: fix prefetch-vs-suspend race

commit 2de510fccbca3d1906b55f4be5f1de83fa2424ef upstream.

There's a possible race condition in dm-verity - the prefetch work item
may race with suspend and it is possible that prefetch continues to run
while the device is suspended. Fix this by calling flush_workqueue and
dm_bufio_client_reset in the postsuspend hook.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm-integrity: set ti->error on memory allocation failure

commit 00204ae3d6712ee053353920e3ce2b00c35ef75b upstream.

The dm-integrity target didn't set the error string when memory
allocation failed. This patch fixes it.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm-ebs: fix prefetch-vs-suspend race

commit 9c565428788fb9b49066f94ab7b10efc686a0a4c upstream.

There's a possible race condition in dm-ebs - dm bufio prefetch may be in
progress while the device is suspended. Fix this by calling
dm_bufio_client_reset in the postsuspend hook.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccp - Fix check for the primary ASP device

commit 07bb097b92b987db518e72525b515d77904e966e upstream.

Currently, the ASP primary device check does not have support for PCI
domains, and, as a result, when the system is configured with PCI domains
(PCI segments) the wrong device can be selected as primary. This results
in commands submitted to the device timing out and failing. The device
check also relies on specific device and function assignments that may
not hold in the future.

Fix the primary ASP device check to include support for PCI domains and
to perform proper checking of the Bus/Device/Function positions.

Fixes: 2a6170dfe755 ("crypto: ccp: Add Platform Security Processor (PSP) device support")
Cc: stable@vger.kernel.org
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: gdsc: Set retain_ff before moving to HW CTRL

commit 25708f73ff171bb4171950c9f4be5aa8504b8459 upstream.

Enable the retain_ff_enable bit of GDSCR only if the GDSC is already ON.
Once the GDSCR moves to HW control, SW no longer can determine the state
of the GDSCR and setting the retain_ff bit could destroy all the register
contents we intended to save.
Therefore, move the retain_ff configuration before switching the GDSC to
HW trigger mode.

Cc: stable@vger.kernel.org
Fixes: 173722995cdb ("clk: qcom: gdsc: Add support to enable retention of GSDCR")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Tested-by: Imran Shaik <quic_imrashai@quicinc.com> # on QCS8300
Link: https://lore.kernel.org/r/20250214-gdsc_fixes-v1-1-73e56d68a80f@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: gdsc: Capture pm_genpd_add_subdomain result code

commit 65a733464553ea192797b889d1533a1a37216f32 upstream.

Adding a new clause to this if/else I noticed the existing usage of
pm_genpd_add_subdomain() wasn't capturing and returning the result code.

pm_genpd_add_subdomain() returns an int and can fail. Capture that result
code and throw it up the call stack if something goes wrong.

Fixes: 1b771839de05 ("clk: qcom: gdsc: enable optional power domain support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-2-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: gdsc: Release pm subdomains in reverse add order

commit 0e6dfde439df0bb977cddd3cf7fff150a084a9bf upstream.

gdsc_unregister() should release subdomains in the reverse order to the
order in which those subdomains were added.

I've made this patch a standalone patch because it facilitates a subsequent
fix to stable.

Fixes: 1b771839de05 ("clk: qcom: gdsc: enable optional power domain support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-1-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: clk-branch: Fix invert halt status bit check for votable clocks

commit 5eac348182d2b5ed1066459abedb7bc6b5466f81 upstream.

BRANCH_HALT_ENABLE and BRANCH_HALT_ENABLE_VOTED flags are used to check
halt status of branch clocks, which have an inverted logic for the halt
bit in CBCR register. However, the current logic in the _check_halt()
method only compares the BRANCH_HALT_ENABLE flags, ignoring the votable
branch clocks.

Update the logic to correctly handle the invert logic for votable clocks
using the BRANCH_HALT_ENABLE_VOTED flags.

Fixes: 9092d1083a62 ("clk: qcom: branch: Extend the invert logic for branch2 clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250128-push_fix-v1-1-fafec6747881@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Ensure that all non-client-specific reparse points are processed by the server

commit 6f8a394aa952257575910d57cf0a63627fa949a2 upstream.

Fix regression in mounts to e.g. onedrive shares.

Generally, reparse points are processed by the SMB server during the
SMB OPEN request, but there are few reparse points which do not have
OPEN-like meaning for the SMB server and has to be processed by the SMB
client. Those are symlinks and special files (fifo, socket, block, char).

For Linux SMB client, it is required to process also name surrogate reparse
points as they represent another entity on the SMB server system. Linux
client will mark them as separate mount points. Examples of name surrogate
reparse points are NTFS junction points (e.g. created by the "mklink" tool
on Windows servers).

So after processing the name surrogate reparse points, clear the
-EOPNOTSUPP error code returned from the parse_reparse_point() to let SMB
server to process reparse points.

And remove printing misleading error message "unhandled reparse tag:" as
reparse points are handled by SMB server and hence unhandled fact is normal
operation.

Fixes: cad3fc0a4c8c ("cifs: Throw -EOPNOTSUPP error on unsupported reparse point type from parse_reparse_point()")
Fixes: b587fd128660 ("cifs: Treat unhandled directory name surrogate reparse points as mount directory nodes")
Cc: stable@vger.kernel.org
Reported-by: Junwen Sun <sunjw8888@gmail.com>
Tested-by: Junwen Sun <sunjw8888@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix integer overflow in match_server()

commit 2510859475d7f46ed7940db0853f3342bf1b65ee upstream.

The echo_interval is not limited in any way during mounting,
which makes it possible to write a large number to it. This can
cause an overflow when multiplying ctx->echo_interval by HZ in
match_server().

Add constraints for echo_interval to smb3_fs_context_parse_param().

Found by Linux Verification Center (linuxtesting.org) with Svace.

Fixes: adfeb3e00e8e1 ("cifs: Make echo interval tunable")
Cc: stable@vger.kernel.org
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: avoid NULL pointer dereference in dbg call

commit b4885bd5935bb26f0a414ad55679a372e53f9b9b upstream.

cifs_server_dbg() implies server to be non-NULL so
move call under condition to avoid NULL pointer dereference.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: e79b0332ae06 ("cifs: ignore cached share root handle closing errors")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/rockchip: Add missing rk3328 mapping entry

commit ee022e5cae052e0c67ca7c5fec0f2e7bc897c70e upstream.

The mapping table for the rk3328 is missing the entry for -25C which is
found in the TRM section 9.5.2 "Temperature-to-code mapping".

NOTE: the kernel uses the tsadc_q_sel=1'b1 mode which is defined as:
      4096-<code in table>. Whereas the table in the TRM gives the code
      "3774" for -25C, the kernel uses 4096-3774=322.

[Dragan Simic] : "After going through the RK3308 and RK3328 TRMs, as
  well as through the downstream kernel code, it seems we may have
  some troubles at our hands.  Let me explain, please.

  To sum it up, part 1 of the RK3308 TRM v1.1 says on page 538 that
  the equation for the output when tsadc_q_sel equals 1 is (4096 -
  tsadc_q), while part 1 of the RK3328 TRM v1.2 says that the output
  equation is (1024 - tsadc_q) in that case.

  The downstream kernel code, however, treats the RK3308 and RK3328
  tables and their values as being the same.  It even mentions 1024 as
  the "offset" value in a comment block for the rk_tsadcv3_control()
  function, just like the upstream code does, which is obviously wrong
  "offset" value when correlated with the table on page 544 of part 1
  of the RK3308 TRM v1.1.

  With all this in mind, it's obvious that more work is needed to make
  it clear where's the actual mistake (it could be that the TRM is
  wrong), which I'll volunteer for as part of the SoC binning project.
  In the meantime, this patch looks fine as-is to me, by offering
  what's a clear improvement to the current state of the upstream
  code"

Link: https://opensource.rock-chips.com/images/9/97/Rockchip_RK3328TRM_V1.1-Part1-20170321.pdf
Cc: stable@vger.kernel.org
Fixes: eda519d5f73e ("thermal: rockchip: Support the RK3328 SOC in thermal driver")
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250207175048.35959-1-twoerner@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Do not add length to print format in synthetic events

commit e1a453a57bc76be678bd746f84e3d73f378a9511 upstream.

The following causes a vsnprintf fault:

  # echo 's:wake_lat char[] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events
  # echo 'hist:keys=pid:ts=common_timestamp.usecs if !(common_flags & 0x18)' > /sys/kernel/tracing/events/sched/sched_waking/trigger
  # echo 'hist:keys=next_pid:delta=common_timestamp.usecs-$ts:onmatch(sched.sched_waking).trace(wake_lat,next_comm,$delta)' > /sys/kernel/tracing/events/sched/sched_switch/trigger

Because the synthetic event's "wakee" field is created as a dynamic string
(even though the string copied is not). The print format to print the
dynamic string changed from "%*s" to "%s" because another location
(__set_synth_event_print_fmt()) exported this to user space, and user
space did not need that. But it is still used in print_synth_event(), and
the output looks like:

          <idle>-0       [001] d..5.   193.428167: wake_lat: wakee=(efault)sshd-sessiondelta=155
    sshd-session-879     [001] d..5.   193.811080: wake_lat: wakee=(efault)kworker/u34:5delta=58
          <idle>-0       [002] d..5.   193.811198: wake_lat: wakee=(efault)bashdelta=91
            bash-880     [002] d..5.   193.811371: wake_lat: wakee=(efault)kworker/u35:2delta=21
          <idle>-0       [001] d..5.   193.811516: wake_lat: wakee=(efault)sshd-sessiondelta=129
    sshd-session-879     [001] d..5.   193.967576: wake_lat: wakee=(efault)kworker/u34:5delta=50

The length isn't needed as the string is always nul terminated. Just print
the string and not add the length (which was hard coded to the max string
length anyway).

Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250407154139.69955768@gandalf.local.home
Fixes: 4d38328eb442d ("tracing: Fix synth event printk format for str fields");
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/xen: fix balloon target initialization for PVH dom0

commit 87af633689ce16ddb166c80f32b120e50b1295de upstream.

PVH dom0 re-uses logic from PV dom0, in which RAM ranges not assigned to
dom0 are re-used as scratch memory to map foreign and grant pages.  Such
logic relies on reporting those unpopulated ranges as RAM to Linux, and
mark them as reserved.  This way Linux creates the underlying page
structures required for metadata management.

Such approach works fine on PV because the initial balloon target is
calculated using specific Xen data, that doesn't take into account the
memory type changes described above.  However on HVM and PVH the initial
balloon target is calculated using get_num_physpages(), and that function
does take into account the unpopulated RAM regions used as scratch space
for remote domain mappings.

This leads to PVH dom0 having an incorrect initial balloon target, which
causes malfunction (excessive memory freeing) of the balloon driver if the
dom0 memory target is later adjusted from the toolstack.

Fix this by using xen_released_pages to account for any pages that are part
of the memory map, but are already unpopulated when the balloon driver is
initialized.  This accounts for any regions used for scratch remote
mappings.  Note on x86 xen_released_pages definition is moved to
enlighten.c so it's uniformly available for all Xen-enabled builds.

Take the opportunity to unify PV with PVH/HVM guests regarding the usage of
get_num_physpages(), as that avoids having to add different logic for PV vs
PVH in both balloon_add_regions() and arch_xen_unpopulated_init().

Much like a6aa4eb994ee, the code in this changeset should have been part of
38620fc4e893.

Fixes: a6aa4eb994ee ('xen/x86: add extra pages to unpopulated-alloc if available')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407082838.65495-1-roger.pau@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: detect and prevent references to a freed transport in sendmsg

commit f1a69a940de58b16e8249dff26f74c8cc59b32be upstream.

sctp_sendmsg() re-uses associations and transports when possible by
doing a lookup based on the socket endpoint and the message destination
address, and then sctp_sendmsg_to_asoc() sets the selected transport in
all the message chunks to be sent.

There's a possible race condition if another thread triggers the removal
of that selected transport, for instance, by explicitly unbinding an
address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have
been set up and before the message is sent. This can happen if the send
buffer is full, during the period when the sender thread temporarily
releases the socket lock in sctp_wait_for_sndbuf().

This causes the access to the transport data in
sctp_outq_select_transport(), when the association outqueue is flushed,
to result in a use-after-free read.

This change avoids this scenario by having sctp_transport_free() signal
the freeing of the transport, tagging it as "dead". In order to do this,
the patch restores the "dead" bit in struct sctp_transport, which was
removed in
commit 47faa1e4c50e ("sctp: remove the dead field of sctp_transport").

Then, in the scenario where the sender thread has released the socket
lock in sctp_wait_for_sndbuf(), the bit is checked again after
re-acquiring the socket lock to detect the deletion. This is done while
holding a reference to the transport to prevent it from being freed in
the process.

If the transport was deleted while the socket lock was relinquished,
sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the
send.

The bug was found by a private syzbot instance (see the error report [1]
and the C reproducer that triggers it [2]).

Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport.txt
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport__repro.c
Cc: stable@vger.kernel.org
Fixes: df132eff4638 ("sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250404-kasan_slab-use-after-free_read_in_sctp_outq_select_transport__20250404-v1-1-5ce4a0b78ef2@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb: move hugetlb_sysctl_init() to the __init section

commit 1ca77ff1837249701053a7fcbdedabc41f4ae67c upstream.

hugetlb_sysctl_init() is only invoked once by an __init function and is
merely a wrapper around another __init function so there is not reason to
keep it.

Fixes the following warning when toning down some GCC inline options:

 WARNING: modpost: vmlinux: section mismatch in reference:
   hugetlb_sysctl_init+0x1b (section: .text) ->
     __register_sysctl_init (section: .init.text)

Link: https://lkml.kernel.org/r/20250319060041.2737320-1-marc.herbert@linux.intel.com
Signed-off-by: Marc Herbert <Marc.Herbert@linux.intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hwpoison: do not send SIGBUS to processes with recovered clean pages

commit aaf99ac2ceb7c974f758a635723eeaf48596388e upstream.

When an uncorrected memory error is consumed there is a race between the
CMCI from the memory controller reporting an uncorrected error with a UCNA
signature, and the core reporting and SRAR signature machine check when
the data is about to be consumed.

- Background: why *UN*corrected errors tied to *C*MCI in Intel platform [1]

Prior to Icelake memory controllers reported patrol scrub events that
detected a previously unseen uncorrected error in memory by signaling a
broadcast machine check with an SRAO (Software Recoverable Action
Optional) signature in the machine check bank.  This was overkill because
it's not an urgent problem that no core is on the verge of consuming that
bad data.  It's also found that multi SRAO UCE may cause nested MCE
interrupts and finally become an IERR.

Hence, Intel downgrades the machine check bank signature of patrol scrub
from SRAO to UCNA (Uncorrected, No Action required), and signal changed to
#CMCI.  Just to add to the confusion, Linux does take an action (in
uc_decode_notifier()) to try to offline the page despite the UC*NA*
signature name.

- Background: why #CMCI and #MCE race when poison is consuming in Intel platform [1]

Having decided that CMCI/UCNA is the best action for patrol scrub errors,
the memory controller uses it for reads too.  But the memory controller is
executing asynchronously from the core, and can't tell the difference
between a "real" read and a speculative read.  So it will do CMCI/UCNA if
an error is found in any read.

Thus:

1) Core is clever and thinks address A is needed soon, issues a speculative read.
2) Core finds it is going to use address A soon after sending the read request
3) The CMCI from the memory controller is in a race with MCE from the core
   that will soon try to retire the load from address A.

Quite often (because speculation has got better) the CMCI from the memory
controller is delivered before the core is committed to the instruction
reading address A, so the interrupt is taken, and Linux offlines the page
(marking it as poison).

- Why user process is killed for instr case

Commit 046545a661af ("mm/hwpoison: fix error page recovered but reported
"not recovered"") tries to fix noise message "Memory error not recovered"
and skips duplicate SIGBUSs due to the race.  But it also introduced a bug
that kill_accessing_process() return -EHWPOISON for instr case, as result,
kill_me_maybe() send a SIGBUS to user process.

If the CMCI wins that race, the page is marked poisoned when
uc_decode_notifier() calls memory_failure().  For dirty pages,
memory_failure() invokes try_to_unmap() with the TTU_HWPOISON flag,
converting the PTE to a hwpoison entry.  As a result,
kill_accessing_process():

- call walk_page_range() and return 1 regardless of whether
  try_to_unmap() succeeds or fails,
- call kill_proc() to make sure a SIGBUS is sent
- return -EHWPOISON to indicate that SIGBUS is already sent to the
  process and kill_me_maybe() doesn't have to send it again.

However, for clean pages, the TTU_HWPOISON flag is cleared, leaving the
PTE unchanged and not converted to a hwpoison entry.  Conversely, for
clean pages where PTE entries are not marked as hwpoison,
kill_accessing_process() returns -EFAULT, causing kill_me_maybe() to send
a SIGBUS.

Console log looks like this:

    Memory failure: 0x827ca68: corrupted page was clean: dropped without side effects
    Memory failure: 0x827ca68: recovery action for clean LRU page: Recovered
    Memory failure: 0x827ca68: already hardware poisoned
    mce: Memory error not recovered

To fix it, return 0 for "corrupted page was clean", preventing an
unnecessary SIGBUS to user process.

[1] https://lore.kernel.org/lkml/20250217063335.22257-1-xueshuai@linux.alibaba.com/T/#mba94f1305b3009dd340ce4114d3221fe810d1871
Link: https://lkml.kernel.org/r/20250312112852.82415-3-xueshuai@linux.alibaba.com
Fixes: 046545a661af ("mm/hwpoison: fix error page recovered but reported "not recovered"")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ruidong Tian <tianruidong@linux.alibaba.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/userfaultfd: fix release hang over concurrent GUP

commit fe4cdc2c4e248f48de23bc778870fd71e772a274 upstream.

This patch should fix a possible userfaultfd release() hang during
concurrent GUP.

This problem was initially reported by Dimitris Siakavaras in July 2023
[1] in a firecracker use case.  Firecracker has a separate process
handling page faults remotely, and when the process releases the
userfaultfd it can race with a concurrent GUP from KVM trying to fault in
a guest page during the secondary MMU page fault process.

A similar problem was reported recently again by Jinjiang Tu in March 2025
[2], even though the race happened this time with a mlockall() operation,
which does GUP in a similar fashion.

In 2017, commit 656710a60e36 ("userfaultfd: non-cooperative: closing the
uffd without triggering SIGBUS") was trying to fix this issue.  AFAIU,
that fixes well the fault paths but may not work yet for GUP.  In GUP, the
issue is NOPAGE will be almost treated the same as "page fault resolved"
in faultin_page(), then the GUP will follow page again, seeing page
missing, and it'll keep going into a live lock situation as reported.

This change makes core mm return RETRY instead of NOPAGE for both the GUP
and fault paths, proactively releasing the mmap read lock.  This should
guarantee the other release thread make progress on taking the write lock
and avoid the live lock even for GUP.

When at it, rearrange the comments to make sure it's uptodate.

[1] https://lore.kernel.org/r/79375b71-db2e-3e66-346b-254c90d915e2@cslab.ece.ntua.gr
[2] https://lore.kernel.org/r/20250307072133.3522652-1-tujinjiang@huawei.com

Link: https://lkml.kernel.org/r/20250312145131.1143062-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Dimitris Siakavaras <jimsiak@cslab.ece.ntua.gr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: add missing release barrier on PGDAT_RECLAIM_LOCKED unlock

commit c0ebbb3841e07c4493e6fe351698806b09a87a37 upstream.

The PGDAT_RECLAIM_LOCKED bit is used to provide mutual exclusion of node
reclaim for struct pglist_data using a single bit.

It is "locked" with a test_and_set_bit (similarly to a try lock) which
provides full ordering with respect to loads and stores done within
__node_reclaim().

It is "unlocked" with clear_bit(), which does not provide any ordering
with respect to loads and stores done before clearing the bit.

The lack of clear_bit() memory ordering with respect to stores within
__node_reclaim() can cause a subsequent CPU to fail to observe stores from
a prior node reclaim.  This is not an issue in practice on TSO (e.g.
x86), but it is an issue on weakly-ordered architectures (e.g.  arm64).

Fix this by using clear_bit_unlock rather than clear_bit to clear
PGDAT_RECLAIM_LOCKED with a release memory ordering semantic.

This provides stronger memory ordering (release rather than relaxed).

Link: https://lkml.kernel.org/r/20250312141014.129725-1-mathieu.desnoyers@efficios.com
Fixes: d773ed6b856a ("mm: test and set zone reclaim lock before starting reclaim")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mremap: correctly handle partial mremap() of VMA starting at 0

commit 937582ee8e8d227c30ec147629a0179131feaa80 upstream.

Patch series "refactor mremap and fix bug", v3.

The existing mremap() logic has grown organically over a very long period
of time, resulting in code that is in many parts, very difficult to follow
and full of subtleties and sources of confusion.

In addition, it is difficult to thread state through the operation
correctly, as function arguments have expanded, some parameters are
expected to be temporarily altered during the operation, others are
intended to remain static and some can be overridden.

This series completely refactors the mremap implementation, sensibly
separating functions, adding comments to explain the more subtle aspects
of the implementation and making use of small structs to thread state
through everything.

The reason for doing so is to lay the groundwork for planned future
changes to the mremap logic, changes which require the ability to easily
pass around state.

Additionally, it would be unhelpful to add yet more logic to code that is
already difficult to follow without first refactoring it like this.

The first patch in this series additionally fixes a bug when a VMA with
start address zero is partially remapped.

Tested on real hardware under heavy workload and all self tests are
passing.

This patch (of 3):

Consider the case of a partial mremap() (that results in a VMA split) of
an accountable VMA (i.e.  which has the VM_ACCOUNT flag set) whose start
address is zero, with the MREMAP_MAYMOVE flag specified and a scenario
where a move does in fact occur:

       addr  end
        |     |
        v     v
    |-------------|
    |     vma     |
    |-------------|
    0

This move is affected by unmapping the range [addr, end).  In order to
prevent an incorrect decrement of accounted memory which has already been
determined, the mremap() code in move_vma() clears VM_ACCOUNT from the VMA
prior to doing so, before reestablishing it in each of the VMAs
post-split:

    addr  end
     |     |
     v     v
 |---|     |---|
 | A |     | B |
 |---|     |---|

Commit 6b73cff239e5 ("mm: change munmap splitting order and move_vma()")
changed this logic such as to determine whether there is a need to do so
by establishing account_start and account_end and, in the instance where
such an operation is required, assigning them to vma->vm_start and
vma->vm_end.

Later the code checks if the operation is required for 'A' referenced
above thusly:

if (account_start) {
...
}

However, if the VMA described above has vma->vm_start == 0, which is now
assigned to account_start, this branch will not be executed.

As a result, the VMA 'A' above will remain stripped of its VM_ACCOUNT
flag, incorrectly.

The fix is to simply convert these variables to booleans and set them as
required.

Link: https://lkml.kernel.org/r/cover.1741639347.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/dc55cb6db25d97c3d9e460de4986a323fa959676.1741639347.git.lorenzo.stoakes@oracle.com
Fixes: 6b73cff239e5 ("mm: change munmap splitting order and move_vma()")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix lazy mmu docs and usage

commit 691ee97e1a9de0cdb3efb893c1f180e3f4a35e32 upstream.

Patch series "Fix lazy mmu mode", v2.

I'm planning to implement lazy mmu mode for arm64 to optimize vmalloc.  As
part of that, I will extend lazy mmu mode to cover kernel mappings in
vmalloc table walkers.  While lazy mmu mode is already used for kernel
mappings in a few places, this will extend it's use significantly.

Having reviewed the existing lazy mmu implementations in powerpc, sparc
and x86, it looks like there are a bunch of bugs, some of which may be
more likely to trigger once I extend the use of lazy mmu.  So this series
attempts to clarify the requirements and fix all the bugs in advance of
that series.  See patch #1 commit log for all the details.

This patch (of 5):

The docs, implementations and use of arch_[enter|leave]_lazy_mmu_mode() is
a bit of a mess (to put it politely).  There are a number of issues
related to nesting of lazy mmu regions and confusion over whether the
task, when in a lazy mmu region, is preemptible or not.  Fix all the
issues relating to the core-mm.  Follow up commits will fix the
arch-specific implementations.  3 arches implement lazy mmu; powerpc,
sparc and x86.

When arch_[enter|leave]_lazy_mmu_mode() was first introduced by commit
6606c3e0da53 ("[PATCH] paravirt: lazy mmu mode hooks.patch"), it was
expected that lazy mmu regions would never nest and that the appropriate
page table lock(s) would be held while in the region, thus ensuring the
region is non-preemptible.  Additionally lazy mmu regions were only used
during manipulation of user mappings.

Commit 38e0edb15bd0 ("mm/apply_to_range: call pte function with lazy
updates") started invoking the lazy mmu mode in apply_to_pte_range(),
which is used for both user and kernel mappings.  For kernel mappings the
region is no longer protected by any lock so there is no longer any
guarantee about non-preemptibility.  Additionally, for RT configs, the
holding the PTL only implies no CPU migration, it doesn't prevent
preemption.

Commit bcc6cc832573 ("mm: add default definition of set_ptes()") added
arch_[enter|leave]_lazy_mmu_mode() to the default implementation of
set_ptes(), used by x86.  So after this commit, lazy mmu regions can be
nested.  Additionally commit 1a10a44dfc1d ("sparc64: implement the new
page table range API") and commit 9fee28baa601 ("powerpc: implement the
new page table range API") did the same for the sparc and powerpc
set_ptes() overrides.

powerpc couldn't deal with preemption so avoids it in commit b9ef323ea168
("powerpc/64s: Disable preemption in hash lazy mmu mode"), which
explicitly disables preemption for the whole region in its implementation.
x86 can support preemption (or at least it could until it tried to add
support nesting; more on this below).  Sparc looks to be totally broken in
the face of preemption, as far as I can tell.

powerpc can't deal with nesting, so avoids it in commit 47b8def9358c
("powerpc/mm: Avoid calling arch_enter/leave_lazy_mmu() in set_ptes"),
which removes the lazy mmu calls from its implementation of set_ptes().
x86 attempted to support nesting in commit 49147beb0ccb ("x86/xen: allow
nesting of same lazy mode") but as far as I can tell, this breaks its
support for preemption.

In short, it's all a mess; the semantics for
arch_[enter|leave]_lazy_mmu_mode() are not clearly defined and as a result
the implementations all have different expectations, sticking plasters and
bugs.

arm64 is aiming to start using these hooks, so let's clean everything up
before adding an arm64 implementation.  Update the documentation to state
that lazy mmu regions can never be nested, must not be called in interrupt
context and preemption may or may not be enabled for the duration of the
region.  And fix the generic implementation of set_ptes() to avoid
nesting.

arch-specific fixes to conform to the new spec will proceed this one.

These issues were spotted by code review and I have no evidence of issues
being reported in the wild.

Link: https://lkml.kernel.org/r/20250303141542.3371656-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20250303141542.3371656-2-ryan.roberts@arm.com
Fixes: bcc6cc832573 ("mm: add default definition of set_ptes()")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juegren Gross <jgross@suse.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: make page_mapped_in_vma() hugetlb walk aware

commit 442b1eca223b4860cc85ef970ae602d125aec5a4 upstream.

When a process consumes a UE in a page, the memory failure handler
attempts to collect information for a potential SIGBUS.  If the page is an
anonymous page, page_mapped_in_vma(page, vma) is invoked in order to

  1. retrieve the vaddr from the process' address space,

  2. verify that the vaddr is indeed mapped to the poisoned page,
     where 'page' is the precise small page with UE.

It's been observed that when injecting poison to a non-head subpage of an
anonymous hugetlb page, no SIGBUS shows up, while injecting to the head
page produces a SIGBUS.  The cause is that, though hugetlb_walk() returns
a valid pmd entry (on x86), but check_pte() detects mismatch between the
head page per the pmd and the input subpage.  Thus the vaddr is considered
not mapped to the subpage and the process is not collected for SIGBUS
purpose.  This is the calling stack:

      collect_procs_anon
        page_mapped_in_vma
          page_vma_mapped_walk
            hugetlb_walk
              huge_pte_lock
                check_pte

check_pte() header says that it
"check if [pvmw->pfn, @pvmw->pfn + @pvmw->nr_pages) is mapped at the @pvmw->pte"
but practically works only if pvmw->pfn is the head page pfn at pvmw->pte.
Hindsight acknowledging that some pvmw->pte could point to a hugepage of
some sort such that it makes sense to make check_pte() work for hugepage.

Link: https://lkml.kernel.org/r/20250224211445.2663312-1-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: linmiaohe <linmiaohe@huawei.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/rmap: reject hugetlb folios in folio_make_device_exclusive()

commit bc3fe6805cf09a25a086573a17d40e525208c5d8 upstream.

Even though FOLL_SPLIT_PMD on hugetlb now always fails with -EOPNOTSUPP,
let's add a safety net in case FOLL_SPLIT_PMD usage would ever be
reworked.

In particular, before commit 9cb28da54643 ("mm/gup: handle hugetlb in the
generic follow_page_mask code"), GUP(FOLL_SPLIT_PMD) would just have
returned a page.  In particular, hugetlb folios that are not PMD-sized
would never have been prone to FOLL_SPLIT_PMD.

hugetlb folios can be anonymous, and page_make_device_exclusive_one() is
not really prepared for handling them at all.  So let's spell that out.

Link: https://lkml.kernel.org/r/20250210193801.781278-3-david@redhat.com
Fixes: b756a3b5e7ea ("mm: device exclusive memory access")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Lyude <lyude@redhat.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yanteng Si <si.yanteng@linux.dev>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc/mm: avoid calling arch_enter/leave_lazy_mmu() in set_ptes

commit eb61ad14c459b54f71f76331ca35d12fa3eb8f98 upstream.

With commit 1a10a44dfc1d ("sparc64: implement the new page table range
API") set_ptes was added to the sparc architecture.  The implementation
included calling arch_enter/leave_lazy_mmu() calls.

The patch removes the usage of arch_enter/leave_lazy_mmu() since this
implies nesting of lazy mmu regions which is not supported.  Without this
fix, lazy mmu mode is effectively disabled because we exit the mode after
the first set_ptes:

remap_pte_range()
  -> arch_enter_lazy_mmu()
  -> set_ptes()
      -> arch_enter_lazy_mmu()
      -> arch_leave_lazy_mmu()
  -> arch_leave_lazy_mmu()

Powerpc suffered the same problem and fixed it in a corresponding way with
commit 47b8def9358c ("powerpc/mm: Avoid calling
arch_enter/leave_lazy_mmu() in set_ptes").

Link: https://lkml.kernel.org/r/20250303141542.3371656-5-ryan.roberts@arm.com
Fixes: 1a10a44dfc1d ("sparc64: implement the new page table range API")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juegren Gross <jgross@suse.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc/mm: disable preemption in lazy mmu mode

commit a1d416bf9faf4f4871cb5a943614a07f80a7d70f upstream.

Since commit 38e0edb15bd0 ("mm/apply_to_range: call pte function with lazy
updates") it's been possible for arch_[enter|leave]_lazy_mmu_mode() to be
called without holding a page table lock (for the kernel mappings case),
and therefore it is possible that preemption may occur while in the lazy
mmu mode.  The Sparc lazy mmu implementation is not robust to preemption
since it stores the lazy mode state in a per-cpu structure and does not
attempt to manage that state on task switch.

Powerpc had the same issue and fixed it by explicitly disabling preemption
in arch_enter_lazy_mmu_mode() and re-enabling in
arch_leave_lazy_mmu_mode().  See commit b9ef323ea168 ("powerpc/64s:
Disable preemption in hash lazy mmu mode").

Given Sparc's lazy mmu mode is based on powerpc's, let's fix it in the
same way here.

Link: https://lkml.kernel.org/r/20250303141542.3371656-4-ryan.roberts@arm.com
Fixes: 38e0edb15bd0 ("mm/apply_to_range: call pte function with lazy updates")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juegren Gross <jgross@suse.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommufd: Fix uninitialized rc in iommufd_access_rw()

commit a05df03a88bc1088be8e9d958f208d6484691e43 upstream.

Reported by smatch:
drivers/iommu/iommufd/device.c:1392 iommufd_access_rw() error: uninitialized symbol 'rc'.

Fixes: 8d40205f6093 ("iommufd: Add kAPI toward external drivers for kernel access")
Link: https://patch.msgid.link/r/20250227200729.85030-1-nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202502271339.a2nWr9UA-lkp@intel.com/
[nicolinc: can't find an original report but only in "old smatch warnings"]
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: fix zone finishing with missing devices

commit 35fec1089ebb5617f85884d3fa6a699ce6337a75 upstream.

If do_zone_finish() is called with a filesystem that has missing devices
(e.g. a RAID file system mounted in degraded mode) it is accessing the
btrfs_device::zone_info pointer, which will not be set if the device
in question is missing.

Check if the device is present (by checking if it has a valid block device
pointer associated) and if not, skip zone finishing for it.

Fixes: 4dcbb8ab31c1 ("btrfs: zoned: make zone finishing multi stripe capable")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: fix zone activation with missing devices

commit 2bbc4a45e5eb6b868357c1045bf6f38f6ba576e0 upstream.

If btrfs_zone_activate() is called with a filesystem that has missing
devices (e.g. a RAID file system mounted in degraded mode) it is accessing
the btrfs_device::zone_info pointer, which will not be set if the device in
question is missing.

Check if the device is present (by checking if it has a valid block
device pointer associated) and if not, skip zone activation for it.

Fixes: f9a912a3c45f ("btrfs: zoned: make zone activation multi stripe capable")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix non-empty delayed iputs list on unmount due to compressed write workers

commit 4c782247b89376a83fa132f7d45d6977edae0629 upstream.

At close_ctree() after we have ran delayed iputs either through explicitly
calling btrfs_run_delayed_iputs() or later during the call to
btrfs_commit_super() or btrfs_error_commit_super(), we assert that the
delayed iputs list is empty.

When we have compressed writes this assertion may fail because delayed
iputs may have been added to the list after we last ran delayed iputs.
This happens like this:

1) We have a compressed write bio executing;

2) We enter close_ctree() and flush the fs_info->endio_write_workers
   queue which is the queue used for running ordered extent completion;

3) The compressed write bio finishes and enters
   btrfs_finish_compressed_write_work(), where it calls
   btrfs_finish_ordered_extent() which in turn calls
   btrfs_queue_ordered_fn(), which queues a work item in the
   fs_info->endio_write_workers queue that we have flushed before;

4) At close_ctree() we proceed, run all existing delayed iputs and
   call btrfs_commit_super() (which also runs delayed iputs), but before
   we run the following assertion below:

      ASSERT(list_empty(&fs_info->delayed_iputs))

   A delayed iput is added by the step below...

5) The ordered extent completion job queued in step 3 runs and results in
   creating a delayed iput when dropping the last reference of the ordered
   extent (a call to btrfs_put_ordered_extent() made from
   btrfs_finish_one_ordered());

6) At this point the delayed iputs list is not empty, so the assertion at
   close_ctree() fails.

Fix this by flushing the fs_info->compressed_write_workers queue at
close_ctree() before flushing the fs_info->endio_write_workers queue,
respecting the queue dependency as the later is responsible for the
execution of ordered extent completion.

CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

backlight: led_bl: Hold led_access lock when calling led_sysfs_disable()

commit 276822a00db3c1061382b41e72cafc09d6a0ec30 upstream.

Lockdep detects the following issue on led-backlight removal:
  [  142.315935] ------------[ cut here ]------------
  [  142.315954] WARNING: CPU: 2 PID: 292 at drivers/leds/led-core.c:455 led_sysfs_enable+0x54/0x80
  ...
  [  142.500725] Call trace:
  [  142.503176]  led_sysfs_enable+0x54/0x80 (P)
  [  142.507370]  led_bl_remove+0x80/0xa8 [led_bl]
  [  142.511742]  platform_remove+0x30/0x58
  [  142.515501]  device_remove+0x54/0x90
  ...

Indeed, led_sysfs_enable() has to be called with the led_access
lock held.

Hold the lock when calling led_sysfs_disable().

Fixes: ae232e45acf9 ("backlight: add led-backlight driver")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20250122091914.309533-1-herve.codina@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mediatek: mt8173: Fix disp-pwm compatible string

commit 46ad36002088eff8fc5cae200aa42ae9f9310ddd upstream.

The MT8173 disp-pwm device should have only one compatible string, based
on the following DT validation error:

    arch/arm64/boot/dts/mediatek/mt8173-elm.dtb: pwm@1401e000: compatible: 'oneOf' conditional failed, one must be fixed:
    ['mediatek,mt8173-disp-pwm', 'mediatek,mt6595-disp-pwm'] is too long
    'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt6795-disp-pwm', 'mediatek,mt8167-disp-pwm']
    'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt8186-disp-pwm', 'mediatek,mt8188-disp-pwm', 'mediatek,mt8192-disp-pwm', 'mediatek,mt8195-disp-pwm', 'mediatek,mt8365-disp-pwm']
    'mediatek,mt8173-disp-pwm' was expected
    'mediatek,mt8183-disp-pwm' was expected
    from schema $id: http://devicetree.org/schemas/pwm/mediatek,pwm-disp.yaml#
    arch/arm64/boot/dts/mediatek/mt8173-elm.dtb: pwm@1401f000: compatible: 'oneOf' conditional failed, one must be fixed:
    ['mediatek,mt8173-disp-pwm', 'mediatek,mt6595-disp-pwm'] is too long
    'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt6795-disp-pwm', 'mediatek,mt8167-disp-pwm']
    'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt8186-disp-pwm', 'mediatek,mt8188-disp-pwm', 'mediatek,mt8192-disp-pwm', 'mediatek,mt8195-disp-pwm', 'mediatek,mt8365-disp-pwm']
    'mediatek,mt8173-disp-pwm' was expected
    'mediatek,mt8183-disp-pwm' was expected
    from schema $id: http://devicetree.org/schemas/pwm/mediatek,pwm-disp.yaml#

Drop the extra "mediatek,mt6595-disp-pwm" compatible string.

Fixes: 61aee9342514 ("arm64: dts: mt8173: add MT8173 display PWM driver support node")
Cc: YH Huang <yh.huang@mediatek.com>
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250108083424.2732375-2-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: Correct the update of max_pfn

commit 89f43e1ce6f60d4f44399059595ac47f7a90a393 upstream.

Hotplugged memory can be smaller than the original memory. For example,
on my target:

root@genericarmv8:~# cat /sys/kernel/debug/memblock/memory
   0: 0x0000000064005000..0x0000000064023fff    0 NOMAP
   1: 0x0000000064400000..0x00000000647fffff    0 NOMAP
   2: 0x0000000068000000..0x000000006fffffff    0 DRV_MNG
   3: 0x0000000088800000..0x0000000094ffefff    0 NONE
   4: 0x0000000094fff000..0x0000000094ffffff    0 NOMAP
max_pfn will affect read_page_owner. Therefore, it should first compare and
then select the larger value for max_pfn.

Fixes: 8fac67ca236b ("arm64: mm: update max_pfn after memory hotplug")
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250321070019.1271859-1-quic_zhenhuah@quicinc.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: Add status chack in r852_ready()

commit b79fe1829975556854665258cf4d2476784a89db upstream.

In r852_ready(), the dev get from r852_get_dev() need to be checked.
An unstable device should not be ready. A proper implementation can
be found in r852_read_byte(). Add a status check and return 0 when it is
unstable.

Fixes: 50a487e7719c ("mtd: rawnand: Pass a nand_chip object to chip->dev_ready()")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: inftlcore: Add error check for inftl_read_oob()

commit d027951dc85cb2e15924c980dc22a6754d100c7c upstream.

In INFTL_findwriteunit(), the return value of inftl_read_oob()
need to be checked. A proper implementation can be
found in INFTL_deleteblock(). The status will be set as
SECTOR_IGNORE to break from the while-loop correctly
if the inftl_read_oob() fails.

Fixes: 8593fbc68b0d ("[MTD] Rework the out of band handling completely")
Cc: stable@vger.kernel.org # v2.6+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: only inc MPJoinAckHMacFailure for HMAC failures

commit 21c02e8272bc95ba0dd44943665c669029b42760 upstream.

Recently, during a debugging session using local MPTCP connections, I
noticed MPJoinAckHMacFailure was not zero on the server side. The
counter was in fact incremented when the PM rejected new subflows,
because the 'subflow' limit was reached.

The fix is easy, simply dissociating the two cases: only the HMAC
validation check should increase MPTCP_MIB_JOINACKMAC counter.

Fixes: 4cf8b7e48a09 ("subflow: introduce and use mptcp_can_accept_new_subflow()")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407-net-mptcp-hmac-failure-mib-v1-1-3c9ecd0a3a50@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: fix NULL pointer in can_accept_new_subflow

commit 443041deb5ef6a1289a99ed95015ec7442f141dc upstream.

When testing valkey benchmark tool with MPTCP, the kernel panics in
'mptcp_can_accept_new_subflow' because subflow_req->msk is NULL.

Call trace:

  mptcp_can_accept_new_subflow (./net/mptcp/subflow.c:63 (discriminator 4)) (P)
  subflow_syn_recv_sock (./net/mptcp/subflow.c:854)
  tcp_check_req (./net/ipv4/tcp_minisocks.c:863)
  tcp_v4_rcv (./net/ipv4/tcp_ipv4.c:2268)
  ip_protocol_deliver_rcu (./net/ipv4/ip_input.c:207)
  ip_local_deliver_finish (./net/ipv4/ip_input.c:234)
  ip_local_deliver (./net/ipv4/ip_input.c:254)
  ip_rcv_finish (./net/ipv4/ip_input.c:449)
  ...

According to the debug log, the same req received two SYN-ACK in a very
short time, very likely because the client retransmits the syn ack due
to multiple reasons.

Even if the packets are transmitted with a relevant time interval, they
can be processed by the server on different CPUs concurrently). The
'subflow_req->msk' ownership is transferred to the subflow the first,
and there will be a risk of a null pointer dereference here.

This patch fixes this issue by moving the 'subflow_req->msk' under the
`own_req == true` conditional.

Note that the !msk check in subflow_hmac_valid() can be dropped, because
the same check already exists under the own_req mpj branch where the
code has been moved to.

Fixes: 9466a1ccebbe ("mptcp: enable JOIN requests even if cookies are in use")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-1-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib: scatterlist: fix sg_split_phys to preserve original scatterlist offsets

commit 8b46fdaea819a679da176b879e7b0674a1161a5e upstream.

The split_sg_phys function was incorrectly setting the offsets of all
scatterlist entries (except the first) to 0.  Only the first scatterlist
entry's offset and length needs to be modified to account for the skip.
Setting the rest entries' offsets to 0 could lead to incorrect data
access.

I am using this function in a crypto driver that I'm currently developing
(not yet sent to mailing list).  During testing, it was observed that the
output scatterlists (except the first one) contained incorrect garbage
data.

I narrowed this issue down to the call of sg_split().  Upon debugging
inside this function, I found that this resetting of offset is the cause
of the problem, causing the subsequent scatterlists to point to incorrect
memory locations in a page.  By removing this code, I am obtaining
expected data in all the split output scatterlists.  Thus, this was indeed
causing observable runtime effects!

This patch removes the offending code, ensuring that the page offsets in
the input scatterlist are preserved in the output scatterlist.

Link: https://lkml.kernel.org/r/20250319111437.1969903-1-t-pratham@ti.com
Fixes: f8bcbe62acd0 ("lib: scatterlist: add sg splitting function")
Signed-off-by: T Pratham <t-pratham@ti.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kamlesh Gurudasani <kamlesh@ti.com>
Cc: Praneeth Bajjuri <praneeth@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locking/lockdep: Decrease nr_unused_locks if lock unused in zap_class()

commit 495f53d5cca0f939eaed9dca90b67e7e6fb0e30c upstream.

Currently, when a lock class is allocated, nr_unused_locks will be
increased by 1, until it gets used: nr_unused_locks will be decreased by
1 in mark_lock(). However, one scenario is missed: a lock class may be
zapped without even being used once. This could result into a situation
that nr_unused_locks != 0 but no unused lock class is active in the
system, and when `cat /proc/lockdep_stats`, a WARN_ON() will
be triggered in a CONFIG_DEBUG_LOCKDEP=y kernel:

  [...] DEBUG_LOCKS_WARN_ON(debug_atomic_read(nr_unused_locks) != nr_unused)
  [...] WARNING: CPU: 41 PID: 1121 at kernel/locking/lockdep_proc.c:283 lockdep_stats_show+0xba9/0xbd0

And as a result, lockdep will be disabled after this.

Therefore, nr_unused_locks needs to be accounted correctly at
zap_class() time.

Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250326180831.510348-1-boqun.feng@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mailbox: tegra-hsp: Define dimensioning masks in SoC data

commit bf0c9fb462038815f5f502653fb6dba06e6af415 upstream.

Tegra264 has updated HSP_INT_DIMENSIONING register as follows:
* nSI is now BIT17:BIT21.
* nDB is now BIT12:BIT16.

Currently, we are using a static macro HSP_nINT_MASK to get the values
from HSP_INT_DIMENSIONING register. This results in wrong values for nSI
for HSP instances that supports 16 shared interrupts.

Define dimensioning masks in soc data and use them to parse nSI, nDB,
nAS, nSS & nSM values.

Fixes: 602dbbacc3ef ("mailbox: tegra: add support for Tegra264")
Cc: stable@vger.kernel.org
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: ene-kb3930: Fix a potential NULL pointer dereference

commit 4cdf1d2a816a93fa02f7b6b5492dc7f55af2a199 upstream.

The off_gpios could be NULL. Add missing check in the kb3930_probe().
This is similar to the issue fixed in commit b1ba8bcb2d1f
("backlight: hx8357: Fix potential NULL pointer dereference").

This was detected by our static analysis tool.

Cc: stable@vger.kernel.org
Fixes: ede6b2d1dfc0 ("mfd: ene-kb3930: Add driver for ENE KB3930 Embedded Controller")
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250224233736.1919739-1-chenyuan0y@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

leds: rgb: leds-qcom-lpg: Fix calculation of best period Hi-Res PWMs

commit 2528eec7da0ec58fcae6d12cfa79a622c933d86b upstream.

When determining the actual best period by looping through all
possible PWM configs, the resolution currently used is based on
bit shift value which is off-by-one above the possible maximum
PWM value allowed.

So subtract one from the resolution before determining the best
period so that the maximum duty cycle requested by the PWM user
won't result in a value above the maximum allowed by the selected
resolution.

Cc: stable@vger.kernel.org # 6.4
Fixes: b00d2ed37617 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20250305-leds-qcom-lpg-fix-max-pwm-on-hi-res-v4-3-bfe124a53a9f@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

leds: rgb: leds-qcom-lpg: Fix pwm resolution max for Hi-Res PWMs

commit b7881eacc07fdf50be3f33c662997541bb59366d upstream.

Ideally, the requested duty cycle should never translate to a PWM
value higher than the selected resolution (PWM size), but currently the
best matched period is never reported back to the PWM consumer, so the
consumer will still be using the requested period which is higher than
the best matched one. This will result in PWM consumer requesting
duty cycle values higher than the allowed PWM value.

For example, a consumer might request a period of 5ms while the best
(closest) period the PWM hardware will do is 4.26ms. For this best
matched resolution, if the selected resolution is 8-bit wide, when
the consumer asks for a duty cycle of 5ms, the PWM value will be 300,
which is outside of what the resolution allows. This will happen with
all possible resolutions when selected.

Since for these Hi-Res PWMs, the current implementation is capping the PWM
value at a 15-bit resolution, even when lower resolutions are selected,
the value will be wrapped around by the HW internal logic to the selected
resolution.

Fix the issue by capping the PWM value to the maximum value allowed by
the selected resolution.

Cc: stable@vger.kernel.org # 6.4
Fixes: b00d2ed37617 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20250305-leds-qcom-lpg-fix-max-pwm-on-hi-res-v4-2-bfe124a53a9f@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: remove wrong sb->s_sequence check

commit e6eff39dd0fe4190c6146069cc16d160e71d1148 upstream.

Journal emptiness is not determined by sb->s_sequence == 0 but rather by
sb->s_start == 0 (which is set a few lines above). Furthermore 0 is a
valid transaction ID so the check can spuriously trigger. Remove the
invalid WARN_ON.

CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250206094657.20865-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i3c: Add NULL pointer check in i3c_master_queue_ibi()

commit bd496a44f041da9ef3afe14d1d6193d460424e91 upstream.

The I3C master driver may receive an IBI from a target device that has not
been probed yet. In such cases, the master calls `i3c_master_queue_ibi()`
to queue an IBI work task, leading to "Unable to handle kernel read from
unreadable memory" and resulting in a kernel panic.

Typical IBI handling flow:
1. The I3C master scans target devices and probes their respective drivers.
2. The target device driver calls `i3c_device_request_ibi()` to enable IBI
   and assigns `dev->ibi = ibi`.
3. The I3C master receives an IBI from the target device and calls
   `i3c_master_queue_ibi()` to queue the target device driver’s IBI
   handler task.

However, since target device events are asynchronous to the I3C probe
sequence, step 3 may occur before step 2, causing `dev->ibi` to be `NULL`,
leading to a kernel panic.

Add a NULL pointer check in `i3c_master_queue_ibi()` to prevent accessing
an uninitialized `dev->ibi`, ensuring stability.

Fixes: 3a379bbcea0af ("i3c: Add core I3C infrastructure")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/Z9gjGYudiYyl3bSe@lizhi-Precision-Tower-5810/
Signed-off-by: Manjunatha Venkatesh <manjunatha.venkatesh@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250326123047.2797946-1-manjunatha.venkatesh@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i3c: master: svc: Use readsb helper for reading MDB

commit c06acf7143bddaa3c0f7bedd8b99e48f6acb85c3 upstream.

The target can send the MDB byte followed by additional data bytes.
The readl on MRDATAB reads one actual byte, but the readsl advances
the destination pointer by 4 bytes. This causes the subsequent payload
to be copied to wrong position in the destination buffer.

Cc: stable@kernel.org
Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250318053606.3087121-3-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb311 client: fix missing tcon check when mounting with linux/posix extensions

commit b365b9d404b7376c60c91cd079218bfef11b7822 upstream.

When mounting the same share twice, once with the "linux" mount parameter
(or equivalently "posix") and then once without (or e.g. with "nolinux"),
we were incorrectly reusing the same tree connection for both mounts.
This meant that the first mount of the share on the client, would
cause subsequent mounts of that same share on the same client to
ignore that mount parm ("linux" vs. "nolinux") and incorrectly reuse
the same tcon.

Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: samsung: exynos-chipid: Add NULL pointer check in exynos_chipid_probe()

commit c8222ef6cf29dd7cad21643228f96535cc02b327 upstream.

soc_dev_attr->revision could be NULL, thus,
a pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b02
("ice: Fix some null pointer dereference issues in ice_ptp.c").

This issue is found by our static analysis tool.

Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250212213518.69432-1-chenyuan0y@gmail.com
Fixes: 3253b7b7cd44 ("soc: samsung: Add exynos chipid driver support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>