staging: lustre: libcfs: use octal permissions

Using octal permissions instead of symbolic ones is preferred.

Signed-off-by: Ernestas Kulik <ernestas.kulik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: avoid warning on missing return

The newly added function triggers a harmless warning:

drivers/staging/lustre/lustre/ptlrpc/pack_generic.c: In function 'lustre_shrink_msg':
drivers/staging/lustre/lustre/ptlrpc/pack_generic.c:472:1: error: control reaches end of non-void function [-Werror=return-type]

This probably happens because LASSERTF() contains an 'unlikely()' that
sometimes prevents gcc from analysing the control flow correctly.
Adding a return statement here seems harmless and lets us keep that
unlikely().

Fixes: 96049bd1ecd0 ("staging: lustre: ptlrpc: embed highest XID in each request")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: fix symbolic permissions warning

Replace symbolic permissions with their octect representation to fix
checkpatch warnings.

Signed-off-by: Sebastian Haas <sehaas@deebas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: fix unaligned parentheses

Fix the following formatting issues:
CHECK: Alignment should match open parenthesis

Signed-off-by: Umang Raghuvanshi <u@umangis.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: loopback: fix broken udelay

The loopback driver allows the user to set a minimum delay of up to one
second to be inserted between test iterations (i.e. request
submissions). The delay is currently specified in microseconds and is
implemented using udelay.

Busy looping for long periods is not just anti-social; udelay must not
be used for delays longer than a few milliseconds due to the risk of
integer overflow.

Replace the broken udelay with a usleep_range with a 100 us range for
short delays (< 20 ms) and otherwise revert to using msleep.

Fixes: b36f04fa9417 ("greybus: loopback: Convert thread delay to microseconds")
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: sdio: Prefer u32 over uint32_t

It fixes the following issue reported by checkpatch.pl:
Prefer kernel type 'u32' over 'uint32_t'

Signed-off-by: Franck Demathieu <fdemathieu@gmail.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: uart: fix TIOCGSERIAL flags

This driver does not have a low-latency mode and should not report
anything else.

Also drop the skip-test flag which isn't used either.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: fix checkpatch decimal permissions error

Fix the following errors:
Use 4 digit octal (0777) not decimal permissions

Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8712: fix spelling errors

Found by checkpatch:
- s/cacluated/calculated/
- s/convertor/converter/
- s/psudo/pseudo/
- s/halfs/halves/

Signed-off-by: Joseph Wright <rjosephwright@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: remove duplicate entries of ili9225

There are multiple entries for ili9225 display defined in
flexfb_chip_table array. remove duplicate entries and
keep single entry.

Signed-off-by: Amitesh Singh <singh.amitesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: lirc: use new parport device model

Modify lirc_parallel driver to use the new parallel port device model.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change msg union in struct lnet_hdr to proper structure

Modify all the msg union fields from typedefs to
to proper structures.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lnet_hdr_t to proper structure

Change lnet_hdr_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lnet_magicversion_t to proper structure

Change lnet_magicversion_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lnet_acceptor_connreq_t to proper structure

Change lnet_acceptor_connreq_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lnet_process_id_packed_t to proper structure

Change lnet_process_id_packed_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lnet_ni_status_t to proper structure

Change lnet_ni_status_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lnet_ping_info_t to proper structure

Change lnet_ping_info_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lnet_handle_wire_t to proper structure

Change lnet_handle_wire_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24566
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: audio_gb.c: Change uint32_t to u32

Change uint32_t to u32, solved the issue reported by checkpatch.pl:

CHECK: Prefer kernel type 'u32' over 'uint32_t'
+ uint32_t *format, uint32_t *rate, u8 *channels,

CHECK: Prefer kernel type 'u32' over 'uint32_t'
+ uint32_t format, uint32_t rate, u8 channels,

Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: os_dep: usb_ops_linux.c - style fix

Fixed comparison, moved the constant to the right side of the test
Found using checkpatch

Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Adding space around '='

This patch fixes the checkpatch issue by adding space around '='.

Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: accel: fix Kconfig warning

commit 762227721fe6225be5b6d233ef681aea5871f5f3
"iio: accel: st_accel: handle deprecated bindings"
attempted to be smart and let users use the old I2C
driver and the new SPI driver, or the old SPI driver and
the new I2C driver in combination for the LIS3LV02,
and put the restrictions on the I2C and SPI subdrivers
not not be combined with the old subdrivers.

This doesn't work since the IIO ST accel top-level
component selects the I2C and SPI subdrivers, resulting
in the following Kconfig noise:

warning: (IIO_ST_ACCEL_3AXIS) selects IIO_ST_ACCEL_I2C_3AXIS
which has unmet direct dependencies (IIO && !SENSORS_LIS3_I2C
&& IIO_ST_ACCEL_3AXIS && IIO_ST_SENSORS_I2C)
warning: (IIO_ST_ACCEL_3AXIS) selects IIO_ST_ACCEL_SPI_3AXIS
which has unmet direct dependencies (IIO && !SENSORS_LIS3_SPI
&& IIO_ST_ACCEL_3AXIS && IIO_ST_SENSORS_SPI)
(...)

This fixes the issue by putting the dependencies directly
in the top-level component instead, so that it never gets
to select its unselectable subcomponent.

Fixes: 762227721fe6 ("iio: accel: st_accel: handle deprecated bindings")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.11b' of git://git./linux/kernel/git/jic23/iio into work-next

Jonathan writes:

Second round of IIO new device support, cleanups and features for the 4.11 cycle

New device support:
* lsm6dsx imu
  - new driver and bindings.
* max11100 adc
  - new driver and bindings.
* tlc4541
  - new driver
* tmp007 thermopile
  - new driver.

Core
* in kernel interfaces
  - pass through raw values if no scaling provided and a processed value is
    requested.
* trigger
  - close a race condition in acquiring trigger reference.
  - constify device_type structures.
  - rework the viio_trigger_alloc function to be much neater and easier to
  read.
  - free trigger resources correctly on some error paths. Avoids putting a
  module we don't have.

Documentation
* ABI
  - specify a unit for proximity measurements.

Cleanups and features
* ads1015
  - constify iio_info structure.
* ads7950 cleanups following merge in previous pull
  - Add device tree bindings
  - Drop the ti prefix from the module name in common with other drivers.
  - Change regulator name to vref to match datasheet and other drivers.
* ak8974
  - remove a redundant zero timeout check.
* bmi160
  - use variable names for sizeof instead of types.
* cm3605
  - mark PM functions as __maybe_unused to avoid a build warning.
* isl29028 (on it's way towards moving out of staging).
  - alignment fixes and newline improvements.
  - combine proxim_get and read_proxim for simpler code.
  - drop unused ISL29028_DEV_ATTR macro
  - move some error logging into functions to cut out repitition.
  - make error messages more consistent.
  - tidy up some brackets.
  - drop the enable flag that nothing uses.
  - only set proximity rate and ALS scale when relevant channel type is enabled.
  - runtime pm support.
* lsm6dsx
  - fix wrong values for gyro sensitivitiy.
* mag3110
  - claim direct mode during sysfs reads to avoid a race condition.
* max1363
  - export OF device table IDs as module aliases.
* max30100
  - use msleep for long uncritical delays.
* mcp4531
  - export OF device table as module aliases.
* ms5611
  - claim direct mode during sysfs reads to avoid a race condition.
* opt3001
  - export OF device table as module aliases.
* sx9500
  - claim direct mode during oversampling changes to avoid a race condition.

iio: trigger: free trigger resource correctly

These stand-alone trigger drivers were using iio_trigger_put()
where they should have been using iio_trigger_free().  The
iio_trigger_put() adds a module_put which is bad since they
never did a module_get.

In the sysfs driver, module_get/put's are used as triggers are
added & removed. This extra module_put() occurs on an error path
in the probe routine (probably rare).

In the bfin-timer & interrupt trigger drivers, the module resources
are not explicitly managed, so it's doing a put on something that
was never get'd.  It occurs on the probe error path and on the
remove path (not so rare).

Tested with the sysfs trigger driver.
The bfin & interrupt drivers were build tested & inspected only.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: trigger: clean up viio_trigger_alloc()

1) Reverse the test for kmalloc() failure so we can pull everything
   back one tab.
2) Use gotos for unwinding.
3) Some of the extra line breaks for the 80 character limit are no
   longer needed so we can remove them.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: constify iio_info structures

Declare iio_info structures as const as they are only stored in
the info field of a iio_dev structure. This field is of type const,
so iio_info structures having similar properties can be made const too.

File size before:
   text    data     bss     dec     hex filename
   6944     792       0    7736    1e38 drivers/iio/adc/ti-ads1015.o

File size after:
   text   data     bss     dec     hex filename
   7264     472       0    7736    1e38 drivers/iio/adc/ti-ads1015.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: industrialio-trigger: constify device_type structures

Declare device_type structure as const as it is only stored in the
type field of a device structure. This field is of type const, so add
const to declaration of device_type structure.

File size before:
   text    data     bss     dec     hex filename
   5389     208      48    5645    160d iio/industrialio-trigger.o

File size after:
   text    data     bss     dec     hex filename
   5453     176      48    5677    162d iio/industrialio-trigger.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: trigger: close race condition in acquiring trigger reference

In iio_trigger_write_current() we find the trigger we want while
holding mutex on the list of triggers, but we don't actually do a
get on it while holding mutex.  We wait until further validations
are completed and we're sure it's the one we want.  Race condition
is that it could be freed by the time we do the get.

Solution is to grab the trigger (iio_trigger_get) as soon as we
find it while holding mutex on the list of triggers.  If later
we decide it's not the right one, put it back. (iio_trigger_put).

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: imu: st_lsm6dsx: fix typo in gyro sensitivity definition

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: add runtime power management support

This patch adds runtime power management support to the isl29028 driver.
It defaults to powering off the device after two seconds of inactivity.

isl29028_chip_init_and_power_on() currently only zeros the CONFIGURE
register on the chip, which will cause the chip to turn off. This patch
also renames that function to isl29028_clear_configure_reg() since it is
now used in several places.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: only set ALS scale when ALS/IR sensing is enabled

isl29028_chip_init_and_power_on() calls isl29028_set_als_scale() and
this is not needed until the user actually needs to take a reading from
the ALS/IR sensor. This patch moves the isl29028_set_als_scale() call
from isl29028_chip_init_and_power_on() to isl29028_set_als_ir_mode().
This sets the stage for faster resume times from runtime power
management if the user is only querying the proximity sensor.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: only set proximity sampling rate when proximity is enabled

isl29028_chip_init_and_power_on() calls isl29028_set_proxim_sampling()
and this is not needed until the user actually needs to take a proximity
reading. This patch moves the isl29028_set_proxim_sampling() call from
isl29028_chip_init_and_power_on() to isl29028_enable_proximity().
This sets the stage for faster resume times from the runtime power
management if the user is only querying the ALS/IR sensor.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: remove enable flag from isl29028_enable_proximity()

isl29028_enable_proximity() has a boolean argument named enable. This
function is only called once and the enable flag is set to true in that
call. This patch removes the enable parameter from that function.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: remove unnecessary parenthesis

isl29028_write_raw() contains unnecessary parenthesis when checking to
see if the passed in lux scale is valid. This patch removes the
unnecessary parenthesis.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: remove out of memory log message

If the call to devm_iio_device_alloc() fails, then isl29028_probe()
logs a message saying that memory cannot be allocated. The user's system
most likely has larger issues at this point. This patch removes that
error message since the error code is passed on and the message is not
necessary.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: remove unnecessary error logging in isl29028_chip_init_and_power_on()

If the call to isl29028_chip_init_and_power_on() in isl29028_probe()
fails, then isl29028_probe() will log an error message. All of the
error paths in that call path already have error logging in place. This
patch removes the unnecessary logging.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: made error messages consistent

The wording and style of the different error messages was not
consistent. This patch makes the wording and style consistent
throughout the driver.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: move failure logging into isl29028_set_als_scale()

When isl29028_set_als_scale() fails, it was up to both callers to log
the failure message. This patch moves the logging into
isl29028_set_als_scale() to reduce the overall amount of code in the
driver.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: move failure logging into isl29028_set_proxim_sampling()

When isl29028_set_proxim_sampling() fails, it was up to both callers to
log the failure message. This patch moves the logging into
isl29028_set_proxim_sampling() to reduce the overall amount of code in
the driver.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: remove unused define ISL29028_DEV_ATTR

The #define ISL29028_DEV_ATTR was not used so this patch removes the
unnecessary code.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: change newlines to improve readability

Add and remove newlines to improve code readability in preparation for
moving the driver out of staging.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: made alignment of variables in struct isl29028_chip consistent

The alignment of the variables in the struct isl29028_chip is not
consistent. This changes all of the variables to use consistent
alignment to improve the code readability.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: combine isl29028_proxim_get() and isl29028_read_proxim()

isl29028_proxim_get() checks to see if the promixity needs to be
enabled on the chip and then calls isl29028_read_proxim(). There
are no other callers of isl29028_read_proxim(). The naming between
these two functions can be confusing so this patch combines the
two to avoid the confusion.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: isl29028: fix alignment of function arguments

Two separate calls to regmap_update_bits() in isl29028_set_als_scale()
and isl29028_set_als_ir_mode() did not have their function arguments
on the next line aligned correctly to the open parenthesis. This patch
corrects the alignment.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: max1363: Export OF device ID table as module aliases

The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: potentiometer: mcp4531: Export OF device ID table as module aliases

The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: light: opt3001: Export OF device ID table as module aliases

The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: health: max30100: use msleep() for long uncritical delays

ulseep_range() uses hrtimers and provides no advantage over msleep()
for larger delays. Fix up the 35ms delays here to use msleep() and
reduce the load on the hrtimer subsystem.

Fixes: commit 4d33615df58b ("iio: light: add MAX30100 oximeter driver support")
Link: http://lkml.org/lkml/2017/1/11/377
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: tlc4541: add support for TI tlc4541 adc

This adds TI's tlc4541 16-bit ADC driver. Which is a single channel
ADC. Supports raw and trigger buffer access.
Also supports the tlc3541 14-bit device, which has not been tested.
Implementation of the tlc3541 is fairly straight forward thou.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

dt-bindings: iio: document MAX11100 ADC

Add device tree bindings documentation for Maxim MAX11100 single-channel
ADC

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: Add Maxim MAX11100 driver

Add iio driver for Maxim MAX11100 single-channel ADC.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: bmi160: use variable names for sizeof() operator

Replace the types with the actual variable names when using the
sizeof() operator.  This is kernel preferred style as it's
more obvious that it is correct.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: light: cm3605: mark PM functions as __maybe_unused

When CONFIG_PM_SLEEP is disabled, we get a harmless warning

drivers/iio/light/cm3605.c:292:12: error: 'cm3605_pm_resume' defined but not used [-Werror=unused-function]
drivers/iio/light/cm3605.c:281:12: error: 'cm3605_pm_suspend' defined but not used [-Werror=unused-function]

Marking the functions as possibly unused avoids the warning without
needing to add an #ifdef.

Fixes: 8afa505c1230 ("iio: light: add driver for Capella CM3605")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: pressure: ms5611: claim direct mode during oversampling changes

Driver was checking for direct mode before changing oversampling
ratios, but was not locking it.  Use the claim/release helper
functions to guarantee the device stays in direct mode while the
oversampling ratios are being updated.  Continue to use the drivers
private state lock to protect against conflicting direct mode access
of the state data.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: proximity: sx9500: claim direct mode during raw proximity reads

Driver was checking for direct mode but not locking it.  Use the
claim/release helper functions to guarantee the device stays in
direct mode during raw reads of proximity data.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Reviewed-by: Vlad Dogaru <ddvlad@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: magnetometer: mag3110: claim direct mode during raw writes

Driver was checking for direct mode but not locking it.  Use
claim/release helper functions to guarantee the device stays
in direct mode during raw writes.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

devicetree: sort the Garmin vendor prefix properly.

The addition of Garmin put it in the incorrect place.  This fixes that
issue.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 9b27c270d403 ("devicetree: add Garmin vendor prefix")
Cc: Rob Herring <robh@kernel.org>
Cc: Matt Ranostay <matt@ranostay.consulting>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

staging: skein: fix checkpatch block comments warning

Fix the following warnings:
Block comments should align the * on each line

Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: fb_ssd1306: Refactor write_vmem()

Refactor write_vmem() for sake of readability.

While here, fix indentation in one comment.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: fb_ssd1306: Support smaller screen sizes

There is 64x48 display exists. In order to support that set multiplexer
to 48 pixels and window address to proper position in the graphic display
data RAM.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: propagate error code from kstrto*()

kstrto*() functions return proper error code.

Do propogate it to the user.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: remove custom DMA mapped buffer

There is no need to duplicate what SPI core already does, i.e. mapping buffers
for DMA capable transfers.

Remove all related pices of code.

Note, that code, besides its redundancy, was buggy: DMA address potentially can
be 0, SPI slave device has nothing to do with DMA capable device properties and
DMA mask in particular.

Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: convert fbtft_reset() to be non-atomic

First of all, fbtft in current state doesn't allow to override GPIOs to be
optional, like "reset" one. It might be a bug somewhere, but rather out of
scope of this fix.

Second, not all GPIOs available on the board would be SoC based, some of them
might sit on I2C GPIO expanders, for example, on Intel Edison/Arduino, and thus
any communication with them might sleep.

Besides that using udelay() and mdelay() is kinda resource wasteful.

Summarize all of the above, convert fbtft_reset() function to non-atomic
variant by using gpio_set_value_cansleep(), usleep_range(), and msleep().

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: Remove NULL test before vfree

vfree frees the virtually continuous block of memory beginning at
addr. If addr is NULL, no operation is performed. So, NULL test is not
needed before vfree().

Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04: Fix coding style errors "open brace go on the same line"

Open braces for enum, union and struct go on the same line.

Signed-off-by: Adrien Descamps <adrien.descamps@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change sfw_counter_t to proper structure

Change sfw_counter_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change srpc_counters_t to proper structure

Change srpc_counters_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lst_test_ping_param_t to proper structure

Change lst_test_ping_param_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lst_test_bulk_param_t to proper structure

Change lst_test_bulk_param_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lst_brw_[type|flags]_t to proper enum

Change lst_brw_[type|flags]_t from typedef to proper enum.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_test_args_t to proper structure

Change lstio_test_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lst_test_type_t to proper enum

Change lst_test_type_t from typedef to proper enum.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_stat_args_t to proper structure

Change lstio_stat_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_batch_info_args_t to proper structure

Change lstio_batch_info_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_batch_list_args_t to proper structure

Change lstio_batch_list_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_batch_query_args_t to proper structure

Change lstio_batch_query_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_batch_stop_args_t to proper structure

Change lstio_batch_stop_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_batch_run_args_t to proper structure

Change lstio_batch_run_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_batch_del_args_t to proper structure

Change lstio_batch_del_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_batch_add_args_t to proper structure

Change lstio_batch_add_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_group_info_args_t to proper structure

Change lstio_group_info_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_group_list_args_t to proper structure

Change lstio_group_list_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_group_nodes_args_t to proper structure

Change lstio_group_nodes_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_group_update_args_t to proper structure

Change lstio_group_update_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_group_del_args_t to proper structure

Change lstio_group_del_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_group_add_args_t to proper structure

Change lstio_group_add_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_debug_args_t to proper structure

Change lstio_debug_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_session_end_args_t to proper structure

Change lstio_session_end_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_session_info_args_t to proper structure

Change lstio_session_info_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstio_session_new_args_t to proper structure

Change lstio_session_new_args_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstcon_trans_stat_t to proper structure

Change lstcon_trans_stat_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstcon_rpc_ent_t to proper structure

Change lstcon_rpc_ent_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstcon_test_batch_ent_t to proper structure

Change lstcon_test_batch_ent_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstcon_batch_ent_t to proper structure

Change lstcon_batch_ent_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstcon_test_ent_t to proper structure

Change lstcon_test_ent_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstcon_ndlist_ent_t to proper structure

Change lstcon_ndlist_ent_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lstcon_node_ent_t to proper structure

Change lstcon_node_ent_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lst_bid_t to proper structure

Change lst_bid_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: change lst_nid_t to proper structure

Change lst_nid_t from typedef to proper structure.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/24188
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>