drm/i915: use consistent CPU mappings for pin_map users

For discrete, users of pin_map() needs to obey the same rules at the TTM
backend, where we map system only objects as WB, and everything else as
WC. The simplest for now is to just force the correct mapping type as
per the new rules for discrete.

Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705135310.1502437-1-matthew.auld@intel.com

drm/i915: Finalize contexts in GEM_CONTEXT_CREATE on version 13+

All the proto-context stuff for context creation exists to allow older
userspace drivers to set VMs and engine sets via SET_CONTEXT_PARAM.
Drivers need to update to use CONTEXT_CREATE_EXT_* for this going
forward.  Force the issue by blocking the old mechanism on any future
hardware generations.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-31-jason@jlekstrand.net

drm/i915/gem: Roll all of context creation together

Now that we have the whole engine set and VM at context creation time,
we can just assign those fields instead of creating first and handling
the VM and engines later.  This lets us avoid creating useless VMs and
engine sets and lets us get rid of the complex VM setting code.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-30-jason@jlekstrand.net

i915/gem/selftests: Assign the VM at context creation in igt_shared_ctx_exec

We want to delete __assign_ppgtt and, generally, stop setting the VM
after context creation.  This is the one place I could find in the
selftests where we set a VM after the fact.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-29-jason@jlekstrand.net

drm/i915/selftests: Take a VM in kernel_context()

This better models where we want to go with contexts in general where
things like the VM and engine set are create parameters instead of being
set after the fact.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-28-jason@jlekstrand.net

drm/i915/gem: Don't allow changing the engine set on running contexts (v3)

When the APIs were added to manage the engine set on a GEM context
directly from userspace, the questionable choice was made to allow
changing the engine set on a context at any time.  This is horribly racy
and there's absolutely no reason why any userspace would want to do this
outside of trying to exercise interesting race conditions.  By removing
support for CONTEXT_PARAM_ENGINES from ctx_setparam, we make it
impossible to change the engine set after the context has been fully
created.

This doesn't yet let us delete all the deferred engine clean-up code as
that's still used for handling the case where the client dies or calls
GEM_CONTEXT_DESTROY while work is in flight.  However, moving to an API
where the engine set is effectively immutable gives us more options to
potentially clean that code up a bit going forward.  It also removes a
whole class of ways in which a client can hurt itself or try to get
around kernel context banning.

v2 (Jason Ekstrand):
 - Expand the commit mesage

v3 (Jason Ekstrand):
 - Make it more obvious that I915_CONTEXT_PARAM_ENGINES returns -EINVAL

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-27-jason@jlekstrand.net

drm/i915/gem: Don't allow changing the VM on running contexts (v4)

When the APIs were added to manage VMs more directly from userspace, the
questionable choice was made to allow changing out the VM on a context
at any time.  This is horribly racy and there's absolutely no reason why
any userspace would want to do this outside of testing that exact race.
By removing support for CONTEXT_PARAM_VM from ctx_setparam, we make it
impossible to change out the VM after the context has been fully
created.  This lets us delete a bunch of deferred task code as well as a
duplicated (and slightly different) copy of the code which programs the
PPGTT registers.

v2 (Jason Ekstrand):
 - Expand the commit message

v3 (Daniel Vetter):
 - Don't drop the __rcu on the vm pointer

v4 (Jason Ekstrand):
 - Make it more obvious that I915_CONTEXT_PARAM_VM returns -EINVAL

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-26-jason@jlekstrand.net

drm/i915/gem: Delay context creation (v3)

The current context uAPI allows for two methods of setting context
parameters: SET_CONTEXT_PARAM and CONTEXT_CREATE_EXT_SETPARAM.  The
former is allowed to be called at any time while the later happens as
part of GEM_CONTEXT_CREATE.  Currently, everything settable via one is
settable via the other.  While some params are fairly simple and setting
them on a live context is harmless such as the context priority, others
are far trickier such as the VM or the set of engines.  In order to swap
out the VM, for instance, we have to delay until all current in-flight
work is complete, swap in the new VM, and then continue.  This leads to
a plethora of potential race conditions we'd really rather avoid.

In previous patches, we added a i915_gem_proto_context struct which is
capable of storing and tracking all such create parameters.  This commit
delays the creation of the actual context until after the client is done
configuring it with SET_CONTEXT_PARAM.  From the perspective of the
client, it has the same u32 context ID the whole time.  From the
perspective of i915, however, it's an i915_gem_proto_context right up
until the point where we attempt to do something which the proto-context
can't handle.  Then the real context gets created.

This is accomplished via a little xarray dance.  When GEM_CONTEXT_CREATE
is called, we create a proto-context, reserve a slot in context_xa but
leave it NULL, the proto-context in the corresponding slot in
proto_context_xa.  Then, whenever we go to look up a context, we first
check context_xa.  If it's there, we return the i915_gem_context and
we're done.  If it's not, we look in proto_context_xa and, if we find it
there, we create the actual context and kill the proto-context.

In order for this dance to work properly, everything which ever touches
a proto-context is guarded by drm_i915_file_private::proto_context_lock,
including context creation.  Yes, this means context creation now takes
a giant global lock but it can't really be helped and that should never
be on any driver's fast-path anyway.

v2 (Daniel Vetter):
 - Commit message grammatical fixes.
 - Use WARN_ON instead of GEM_BUG_ON
 - Rename lazy_create_context_locked to finalize_create_context_locked
 - Rework the control-flow logic in the setparam ioctl
 - Better documentation all around

v3 (kernel test robot):
 - Make finalize_create_context_locked static

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-25-jason@jlekstrand.net

drm/i915/gt: Drop i915_address_space::file (v2)

There's a big comment saying how useful it is but no one is using this
for anything anymore.

It was added in 2bfa996e031b ("drm/i915: Store owning file on the
i915_address_space") and used for debugfs at the time as well as telling
the difference between the global GTT and a PPGTT.  In f6e8aa387171
("drm/i915: Report the number of closed vma held by each context in
debugfs") we removed one use of it by switching to a context walk and
comparing with the VM in the context.  Finally, VM stats for debugfs
were entirely nuked in db80a1294c23 ("drm/i915/gem: Remove per-client
stats from debugfs/i915_gem_objects")

v2 (Daniel Vetter):
 - Delete a struct drm_i915_file_private pre-declaration
 - Add a comment to the commit message about history

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-24-jason@jlekstrand.net

drm/i915/gem: Return an error ptr from context_lookup

We're about to start doing lazy context creation which means contexts
get created in i915_gem_context_lookup and we may start having more
errors than -ENOENT.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-23-jason@jlekstrand.net

drm/i915/gem: Use the proto-context to handle create parameters (v5)

This means that the proto-context needs to grow support for engine
configuration information as well as setparam logic.  Fortunately, we'll
be deleting a lot of setparam logic on the primary context shortly so it
will hopefully balance out.

There's an extra bit of fun here when it comes to setting SSEU and the
way it interacts with PARAM_ENGINES.  Unfortunately, thanks to
SET_CONTEXT_PARAM and not being allowed to pick the order in which we
handle certain parameters, we have think about those interactions.

v2 (Daniel Vetter):
 - Add a proto_context_free_user_engines helper
 - Comment on SSEU in the commit message
 - Use proto_context_set_persistence in set_proto_ctx_param

v3 (Daniel Vetter):
 - Fix a doc comment
 - Do an explicit HAS_FULL_PPGTT check in set_proto_ctx_vm instead of
   relying on pc->vm != NULL.
 - Handle errors for CONTEXT_PARAM_PERSISTENCE
 - Don't allow more resetting user engines
 - Rework initialization of UCONTEXT_PERSISTENCE

v4 (Jason Ekstrand):
 - Move hand-rolled initialization of UCONTEXT_PERSISTENCE to an
   earlier patch

v5 (Jason Ekstrand):
 - Move proto_context_set_persistence to this patch

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-22-jason@jlekstrand.net

drm/i915/gem: Make an alignment check more sensible

What we really want to check is that size of the engines array, i.e.
args->size - sizeof(*user) is divisible by the element size, i.e.
sizeof(*user->engines) because that's what's required for computing the
array length right below the check.  However, we're currently not doing
this and instead doing a compile-time check that sizeof(*user) is
divisible by sizeof(*user->engines) and avoiding the subtraction.  As
far as I can tell, the only reason for the more confusing pair of checks
is to avoid a single subtraction of a constant.

The other thing the BUILD_BUG_ON might be trying to implicitly check is
that offsetof(user->engines) == sizeof(*user) and we don't have any
weird padding throwing us off.  However, that's not the check it's doing
and it's not even a reliable way to do that check.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-21-jason@jlekstrand.net

drm/i915: Add an i915_gem_vm_lookup helper

This is the VM equivalent of i915_gem_context_lookup.  It's only used
once in this patch but future patches will need to duplicate this lookup
code so it's better to have it in a helper.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-20-jason@jlekstrand.net

drm/i915/gem: Optionally set SSEU in intel_context_set_gem

For now this is a no-op because everyone passes in a null SSEU but it
lets us get some of the error handling and selftest refactoring plumbed
through.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-19-jason@jlekstrand.net

drm/i915/gem: Rework error handling in default_engines

Since free_engines works for partially constructed engine sets, we can
use the usual goto pattern.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-18-jason@jlekstrand.net

drm/i915/gem: Add an intermediate proto_context struct (v5)

The current context uAPI allows for two methods of setting context
parameters: SET_CONTEXT_PARAM and CONTEXT_CREATE_EXT_SETPARAM.  The
former is allowed to be called at any time while the later happens as
part of GEM_CONTEXT_CREATE.  Currently, everything settable via one is
settable via the other.  While some params are fairly simple and setting
them on a live context is harmless such the context priority, others are
far trickier such as the VM or the set of engines.  In order to swap out
the VM, for instance, we have to delay until all current in-flight work
is complete, swap in the new VM, and then continue.  This leads to a
plethora of potential race conditions we'd really rather avoid.

Unfortunately, both methods of setting the VM and the engine set are in
active use today so we can't simply disallow setting the VM or engine
set vial SET_CONTEXT_PARAM.  In order to work around this wart, this
commit adds a proto-context struct which contains all the context create
parameters.

v2 (Daniel Vetter):
 - Better commit message
 - Use __set/clear_bit instead of set/clear_bit because there's no race
   and we don't need the atomics

v3 (Daniel Vetter):
 - Use manual bitops and BIT() instead of __set_bit

v4 (Daniel Vetter):
 - Add a changelog to the commit message
 - Better hyperlinking in docs
 - Create the default PPGTT in i915_gem_create_context

v5 (Daniel Vetter):
 - Hand-roll the initialization of UCONTEXT_PERSISTENCE

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-17-jason@jlekstrand.net

drm/i915: Add gem/i915_gem_context.h to the docs

In order to prevent kernel doc warnings, also fill out docs for any
missing fields and fix those that forgot the "@".

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-16-jason@jlekstrand.net

drm/i915/gem: Add a separate validate_priority helper

With the proto-context stuff added later in this series, we end up
having to duplicate set_priority.  This lets us avoid duplicating the
validation logic.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-15-jason@jlekstrand.net

drm/i915: Stop manually RCU banging in reset_stats_ioctl (v2)

As far as I can tell, the only real reason for this is to avoid taking a
reference to the i915_gem_context.  The cost of those two atomics
probably pales in comparison to the cost of the ioctl itself so we're
really not buying ourselves anything here.  We're about to make context
lookup a tiny bit more complicated, so let's get rid of the one hand-
rolled case.

Some usermode drivers such as our Vulkan driver call GET_RESET_STATS on
every execbuf so the perf here could theoretically be an issue.  If this
ever does become a performance issue for any such userspace drivers,
they can use set CONTEXT_PARAM_RECOVERABLE to false and look for -EIO
coming from execbuf to check for hangs instead.

v2 (Daniel Vetter):
 - Add a comment in the commit message about recoverable contexts

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-14-jason@jlekstrand.net

drm/i915/gem: Disallow creating contexts with too many engines

There's no sense in allowing userspace to create more engines than it
can possibly access via execbuf.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-13-jason@jlekstrand.net

drm/i915/request: Remove the hook from await_execution

This was only ever used for FENCE_SUBMIT automatic engine selection
which was removed in the previous commit.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-12-jason@jlekstrand.net

drm/i915/gem: Remove engine auto-magic with FENCE_SUBMIT (v2)

Even though FENCE_SUBMIT is only documented to wait until the request in
the in-fence starts instead of waiting until it completes, it has a bit
more magic than that.  If FENCE_SUBMIT is used to submit something to a
balanced engine, we would wait to assign engines until the primary
request was ready to start and then attempt to assign it to a different
engine than the primary.  There is an IGT test (the bonded-slice subtest
of gem_exec_balancer) which exercises this by submitting a primary batch
to a specific VCS and then using FENCE_SUBMIT to submit a secondary
which can run on any VCS and have i915 figure out which VCS to run it on
such that they can run in parallel.

However, this functionality has never been used in the real world.  The
media driver (the only user of FENCE_SUBMIT) always picks exactly two
physical engines to bond and never asks us to pick which to use.

v2 (Daniel Vetter):
 - Mention the exact IGT test this breaks

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-11-jason@jlekstrand.net

drm/i915/gem: Disallow bonding of virtual engines (v3)

This adds a bunch of complexity which the media driver has never
actually used.  The media driver does technically bond a balanced engine
to another engine but the balanced engine only has one engine in the
sibling set.  This doesn't actually result in a virtual engine.

This functionality was originally added to handle cases where we may
have more than two video engines and media might want to load-balance
their bonded submits by, for instance, submitting to a balanced vcs0-1
as the primary and then vcs2-3 as the secondary.  However, no such
hardware has shipped thus far and, if we ever want to enable such
use-cases in the future, we'll use the up-and-coming parallel submit API
which targets GuC submission.

This makes I915_CONTEXT_ENGINES_EXT_BOND a total no-op.  We leave the
validation code in place in case we ever decide we want to do something
interesting with the bonding information.

v2 (Jason Ekstrand):
 - Don't delete quite as much code.

v3 (Tvrtko Ursulin):
 - Add some history to the commit message

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-10-jason@jlekstrand.net

drm/i915: Drop getparam support for I915_CONTEXT_PARAM_ENGINES

This has never been used by any userspace except IGT and provides no
real functionality beyond parroting back parameters userspace passed in
as part of context creation or via setparam.  If the context is in
legacy mode (where you use I915_EXEC_RENDER and friends), it returns
success with zero data so it's not useful for discovering what engines
are in the context.  It's also not a replacement for the recently
removed I915_CONTEXT_CLONE_ENGINES because it doesn't return any of the
balancing or bonding information.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-9-jason@jlekstrand.net

drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)

This API is entirely unnecessary and I'd love to get rid of it.  If
userspace wants a single timeline across multiple contexts, they can
either use implicit synchronization or a syncobj, both of which existed
at the time this feature landed.  The justification given at the time
was that it would help GL drivers which are inherently single-timeline.
However, neither of our GL drivers actually wanted the feature.  i965
was already in maintenance mode at the time and iris uses syncobj for
everything.

Unfortunately, as much as I'd love to get rid of it, it is used by the
media driver so we can't do that.  We can, however, do the next-best
thing which is to embed a syncobj in the context and do exactly what
we'd expect from userspace internally.  This isn't an entirely identical
implementation because it's no longer atomic if userspace races with
itself by calling execbuffer2 twice simultaneously from different
threads.  It won't crash in that case; it just doesn't guarantee any
ordering between those two submits.  It also means that sync files
exported from different engines on a SINGLE_TIMELINE context will have
different fence contexts.  This is visible to userspace if it looks at
the obj_name field of sync_fence_info.

Moving SINGLE_TIMELINE to a syncobj emulation has a couple of technical
advantages beyond mere annoyance.  One is that intel_timeline is no
longer an api-visible object and can remain entirely an implementation
detail.  This may be advantageous as we make scheduler changes going
forward.  Second is that, together with deleting the CLONE_CONTEXT API,
we should now have a 1:1 mapping between intel_context and
intel_timeline which may help us reduce locking.

v2 (Tvrtko Ursulin):
 - Update the comment on i915_gem_context::syncobj to mention that it's
   an emulation and the possible race if userspace calls execbuffer2
   twice on the same context concurrently.
v2 (Jason Ekstrand):
 - Wrap the checks for eb.gem_context->syncobj in unlikely()
 - Drop the dma_fence reference
 - Improved commit message

v3 (Jason Ekstrand):
 - Move the dma_fence_put() to before the error exit

v4 (Tvrtko Ursulin):
 - Add a comment about fence contexts to the commit message

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-8-jason@jlekstrand.net

drm/i915: Drop the CONTEXT_CLONE API (v2)

This API allows one context to grab bits out of another context upon
creation.  It can be used as a short-cut for setparam(getparam()) for
things like I915_CONTEXT_PARAM_VM.  However, it's never been used by any
real userspace.  It's used by a few IGT tests and that's it.  Since it
doesn't add any real value (most of the stuff you can CLONE you can copy
in other ways), drop it.

There is one thing that this API allows you to clone which you cannot
clone via getparam/setparam: timelines.  However, timelines are an
implementation detail of i915 and not really something that needs to be
exposed to userspace.  Also, sharing timelines between contexts isn't
obviously useful and supporting it has the potential to complicate i915
internally.  It also doesn't add any functionality that the client can't
get in other ways.  If a client really wants a shared timeline, they can
use a syncobj and set it as an in and out fence on every submit.

v2 (Jason Ekstrand):
 - More detailed commit message

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-7-jason@jlekstrand.net

drm/i915/gem: Return void from context_apply_all

None of the callbacks we use with it return an error code anymore; they
all return 0 unconditionally.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-6-jason@jlekstrand.net

drm/i915/gem: Set the watchdog timeout directly in intel_context_set_gem (v2)

Instead of handling it like a context param, unconditionally set it when
intel_contexts are created.  For years we've had the idea of a watchdog
uAPI floating about. The aim was for media, so that they could set very
tight deadlines for their transcodes jobs, so that if you have a corrupt
bitstream (especially for decoding) you don't hang your desktop too
hard.  But it's been stuck in limbo since forever, and this simplifies
things a bit in preparation for the proto-context work.  If we decide to
actually make said uAPI a reality, we can do it through the proto-
context easily enough.

This does mean that we move from reading the request_timeout_ms param
once per engine when engines are created instead of once at context
creation.  If someone changes request_timeout_ms between creating a
context and setting engines, it will mean that they get the new timeout.
If someone races setting request_timeout_ms and context creation, they
can theoretically end up with different timeouts.  However, since both
of these are fairly harmless and require changing kernel params, we
don't care.

v2 (Tvrtko Ursulin):
 - Add a comment about races with request_timeout_ms

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-5-jason@jlekstrand.net

drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP

The idea behind this param is to support OpenCL drivers with relocations
because OpenCL reserves 0x0 for NULL and, if we placed memory there, it
would confuse CL kernels.  It was originally sent out as part of a patch
series including libdrm [1] and Beignet [2] support.  However, the
libdrm and Beignet patches never landed in their respective upstream
projects so this API has never been used.  It's never been used in Mesa
or any other driver, either.

Dropping this API allows us to delete a small bit of code.

[1]: https://lists.freedesktop.org/archives/intel-gfx/2015-May/067030.html
[2]: https://lists.freedesktop.org/archives/intel-gfx/2015-May/067031.html

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-4-jason@jlekstrand.net

drm/i915: Stop storing the ring size in the ring pointer (v3)

Previously, we were storing the ring size in the ring pointer before it
was actually allocated.  We would then guard setting the ring size on
checking for CONTEXT_ALLOC_BIT.  This is error-prone at best and really
only saves us a few bytes on something that already burns at least 4K.
Instead, this patch adds a new ring_size field and makes everything use
that.

v2 (Daniel Vetter):
 - Replace 512 * SZ_4K with SZ_2M

v2 (Jason Ekstrand):
 - Rebase on top of page migration code

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-3-jason@jlekstrand.net

drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE

This reverts commit 88be76cdafc7 ("drm/i915: Allow userspace to specify
ringsize on construction").  This API was originally added for OpenCL
but the compute-runtime PR has sat open for a year without action so we
can still pull it out if we want.  I argue we should drop it for three
reasons:

 1. If the compute-runtime PR has sat open for a year, this clearly
    isn't that important.

 2. It's a very leaky API.  Ring size is an implementation detail of the
    current execlist scheduler and really only makes sense there.  It
    can't apply to the older ring-buffer scheduler on pre-execlist
    hardware because that's shared across all contexts and it won't
    apply to the GuC scheduler that's in the pipeline.

 3. Having userspace set a ring size in bytes is a bad solution to the
    problem of having too small a ring.  There is no way that userspace
    has the information to know how to properly set the ring size so
    it's just going to detect the feature and always set it to the
    maximum of 512K.  This is what the compute-runtime PR does.  The
    scheduler in i915, on the other hand, does have the information to
    make an informed choice.  It could detect if the ring size is a
    problem and grow it itself.  Or, if that's too hard, we could just
    increase the default size from 16K to 32K or even 64K instead of
    relying on userspace to do it.

Let's drop this API for now and, if someone decides they really care
about solving this problem, they can do it properly.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-2-jason@jlekstrand.net

drm/i915/adlp: Add ADL-P GuC/HuC firmware files

Add ADL-P to the list of supported GuC and HuC firmware versions. For
HuC, it reuses the existing TGL firmware file. For GuC, there is a
dedicated firmware release.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210626004522.1699509-3-John.C.Harrison@Intel.com

drm/i915/huc: Update TGL and friends to HuC 7.9.3

A new HuC is available for TGL and compatible platforms, so switch to
using it.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210626004522.1699509-2-John.C.Harrison@Intel.com

drm/i915/adl_s: Fix dma_mask_size to 39 bit

46 bit addressing enables you to use 4 bits  to support some
MKTME features, and 3 more bits for Optane support that uses
a subset of MTKME for persistent memory.

But GTT addressing sticking to 39 bit addressing, thus setting
dma_mask_size to 39 fixes below tests :
igt@i915_selftest@live@mman
igt@kms_big_fb@linear-32bpp-rotate-0
igt@gem_create@create-clear
igt@gem_mmap_offset@clear
igt@gem_mmap_gtt@cpuset-big-copy

In a way solves Gitlab#3142
https://gitlab.freedesktop.org/drm/intel/-/issues/3142, which had
following errors :
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write] Request device [00:02.0] PASID ffffffff fault addr
7effff9000 [fault reason 05] PTE Write access is not set

0x7effff9000 is suspiciously exactly 39 bits, so it seems likely that
the HW just ends up masking off those extra bits hence DMA errors.

Changes since V2 :
- dim checkpatch error solved
Changes since V1 :
- Added more details to commit message - Matthew Auld

Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708071222.955455-1-tejaskumarx.surendrakumar.upadhyay@intel.com

drm/i915/gt: finish INTEL_GEN and friends conversion

Commit c816723b6b8a ("drm/i915/gt: replace IS_GEN and friends with
GRAPHICS_VER") converted INTEL_GEN and friends to the new version check
macros.  Meanwhile, some changes sneaked in to use INTEL_GEN. Remove the
last users so we can remove the macros.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707181325.2130821-2-lucas.demarchi@intel.com

drm/i915/selftests: fix smatch warning in mock_reserve

If mock_region_create fails then mem will be an error pointer. Instead
we just need to use the correct ordering for the onion unwind.

igt_mock_reserve() error: 'mem' dereferencing possible ERR_PTR()

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702104642.1189978-2-matthew.auld@intel.com

drm/i915/selftests: fix smatch warning in igt_check_blocks

The block here can't be NULL, especially since we already dereferenced
it earlier, so remove the redundant check.

igt_check_blocks() warn: variable dereferenced before check 'block' (see line 126)

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702104642.1189978-1-matthew.auld@intel.com

drm/i915: Improve debug Kconfig texts a bit

We're not consistently recommending these for developers only.

I stumbled over this due to DRM_I915_LOW_LEVEL_TRACEPOINTS, which was
added in

commit 354d036fcf70654cff2e2cbdda54a835d219b9d2
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date:   Tue Feb 21 11:01:42 2017 +0000

    drm/i915/tracepoints: Add request submit and execute tracepoints

to "alleviate the performance impact concerns."

Which is nonsense.

Tvrtko and Joonas pointed out on irc that the real (but undocumented
reason) was stable abi concerns for tracepoints, see

https://lwn.net/Articles/705270/

and the specific change that was blocked around tracepoints:

https://lwn.net/Articles/442113/

Anyway to make it a notch clearer why we have this Kconfig option
consistly add the "Recommended for driver developers only." to it and
all the other debug options we have.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702201708.2075793-1-daniel.vetter@ffwll.ch

drm/i915: Drop all references to DRM IRQ midlayer

Remove all references to DRM's IRQ midlayer. i915 uses Linux' interrupt
functions directly.

v2:
* also remove an outdated comment
* move IRQ fix into separate patch
* update Fixes tag (Daniel)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b318b82455bd ("drm/i915: Nuke drm_driver irq vfuncs")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701173618.10718-3-tzimmermann@suse.de

drm/i915: Use the correct IRQ during resume

The code in xcs_resume() probably didn't work as intended. It uses
struct drm_device.irq, which is allocated to 0, but never initialized
by i915 to the device's interrupt number.

Change all calls to synchronize_hardirq() to intel_synchronize_irq(),
which uses the correct interrupt. _hardirq() functions are not needed
in this context.

v5:
* go back to _hardirq() after PCI probe reported wrong
  context; add rsp comment
v4:
* switch everything to intel_synchronize_irq() (Daniel)
v3:
* also use intel_synchronize_hardirq() at another callsite
v2:
* wrap irq code in intel_synchronize_hardirq() (Ville)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 536f77b1caa0 ("drm/i915/gt: Call stop_ring() from ring resume, again")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701173618.10718-2-tzimmermann@suse.de

drm/i915/gtt: ignore min_page_size for paging structures

The min_page_size is only needed for pages inserted into the GTT, and
for our paging structures we only need at most 4K bytes, so simply
ignore the min_page_size restrictions here, otherwise we might see some
severe overallocation on some devices.

v2(Thomas): add some commentary

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625103824.558481-2-matthew.auld@intel.com

drm/i915: support forcing the page size with lmem

For some specialised objects we might need something larger than the
regions min_page_size due to some hw restriction, and slightly more
hairy is needing something smaller with the guarantee that such objects
will never be inserted into any GTT, which is the case for the paging
structures.

This also fixes how we setup the BO page_alignment, if we later migrate
the object somewhere else. For example if the placements are {SMEM,
LMEM}, then we might get this wrong. Pushing the min_page_size behaviour
into the manager should fix this.

v2(Thomas): push the default page size behaviour into buddy_man, and let
the user override it with the page-alignment, which looks cleaner

v3: rebase on ttm sys changes

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625103824.558481-1-matthew.auld@intel.com

drm/i915/display: Migrate objects to LMEM if possible for display

Objects intended to be used as display framebuffers must reside in
LMEM for discrete. If they happen to not do that, migrate them to
LMEM before pinning.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629151203.209465-4-thomas.hellstrom@linux.intel.com

drm/i915/gem: Introduce a selftest for the gem object migrate functionality

A selftest for the gem object migrate functionality. Slightly adapted
from the original by Matthew to the new interface and new fill blit
code.

v4:
- Initialize buffers and check contents after migration
  (Suggested by Matthew Auld)
- Perform async migration (if implemented) in the igt_lmem_pages_migrate
  test
- Test also migration to the current region.

Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> #v3
Link: https://patchwork.freedesktop.org/patch/msgid/20210629151203.209465-3-thomas.hellstrom@linux.intel.com

drm/i915/gem: Implement object migration

Introduce an interface to migrate objects between regions.
This is primarily intended to migrate objects to LMEM for display and
to SYSTEM for dma-buf, but might be reused in one form or another for
performance-based migration.

v2:
- Verify that the memory region given as an id really exists.
  (Reported by Matthew Auld)
- Call i915_gem_object_{init,release}_memory_region() when switching region
  to handle also switching region lists. (Reported by Matthew Auld)
v3:
- Fix i915_gem_object_can_migrate() to return true if object is already in
  the correct region, even if the object ops doesn't have a migrate()
  callback.
- Update typo in commit message.
- Fix kerneldoc of i915_gem_object_wait_migration().
v4:
- Improve documentation (Suggested by Mattew Auld and Michael Ruhl)
- Always assume TTM migration hits a TTM move and unsets the pages through
  move_notify. (Reported by Matthew Auld)
- Add a dma_fence_might_wait() annotation to
  i915_gem_object_wait_migration() (Suggested by Daniel Vetter)
v5:
- Re-add might_sleep() instead of __dma_fence_might_wait(), Sent
  v4 with the wrong version, didn't compile and __dma_fence_might_wait()
  is not exported.
- Added an R-B.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629151203.209465-2-thomas.hellstrom@linux.intel.com

drm/doc/rfc: i915 new parallel submission uAPI plan

Add entry for i915 new parallel submission uAPI plan.

v2:
 (Daniel Vetter):
  - Expand logical order explaination
  - Add dummy header
  - Only allow N BBs in execbuf IOCTL
  - Configure parallel submission per slot not per gem context
v3:
 (Marcin Ślusarz):
  - Lot's of typos / bad english fixed
 (Tvrtko Ursulin):
  - Consistent pseudo code, clean up wording in descriptions
v4:
 (Daniel Vetter)
  - Drop flags
  - Add kernel doc
  - Reword a few things / fix typos
 (Tvrtko)
  - Reword a few things / fix typos
v5:
 (Checkpatch)
  - Fix typos
 (Docs)
  - Fix warning

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
CC: Carl Zhang <carl.zhang@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Tony Ye <tony.ye@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629193511.124099-3-matthew.brost@intel.com

drm/doc/rfc: i915 GuC submission / DRM scheduler

Add entry for i915 GuC submission / DRM scheduler integration plan.
Follow up patch with details of new parallel submission uAPI to come.

v2:
 (Daniel Vetter)
  - Expand explaination of why bonding isn't supported for GuC
    submission
  - CC some of the DRM scheduler maintainers
  - Add priority inheritance / boosting use case
  - Add reasoning for removing in order assumptions
 (Daniel Stone)
  - Add links to priority spec
v4:
 (Tvrtko)
  - Add TODOs section
 (Daniel Vetter)
  - Pull in 1 line from following patch
v5:
 (Checkpatch)
  - Fix typos

Cc: Christian König <christian.koenig@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629193511.124099-2-matthew.brost@intel.com

drm/i915/selftest: Extend ctx_timestamp ICL workaround to GEN11

EHL and JSL are also observing requirement for 80ns interval for
CTX_TIMESTAMP thus extending it to GEN11.

Changes since V1:
- IS_GEN replaced by GRAPHICS_VER - Tvrtko

Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624112250.895410-1-tejaskumarx.surendrakumar.upadhyay@intel.com

drm/i915: Reinstate the mmap ioctl for some platforms

Reinstate the mmap ioctl for all current integrated platforms.
The intention was really to have it disabled for discrete graphics
where we enforce a single mmap mode.

This was reported to break ADL-P with the media stack, which was not the
intention. Although longer term we do still plan to sunset this ioctl
even for integrated, in favour of using mmap_offset instead.

Fixes: 35cbd91eb541 ("drm/i915: Disable mmap ioctl for gen12+")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624112914.311984-1-thomas.hellstrom@linux.intel.com

drm/i915/ttm: Use TTM for system memory

For discrete, use TTM for both cached and WC system memory. That means
we currently rely on the TTM memory accounting / shrinker. For cached
system memory we should consider remaining shmem-backed, which can be
implemented from our ttm_tt_populate callback. We can then also reuse our
own very elaborate shrinker for that memory.

If an object is evicted to a gem allowable region, we will now consider
the object migrated, and we flip the gem region and move the object to a
different region list. Since we are now changing gem regions, we can't
any longer rely on the CONTIGUOUS flag being set based on the region
min page size, so remove that flag update. If we want to reintroduce it,
we need to put it in the mutable flags.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624084240.270219-4-thomas.hellstrom@linux.intel.com

drm/i915/ttm: Adjust gem flags and caching settings after a move

After a TTM move or object init we need to update the i915 gem flags and
caching settings to reflect the new placement. Currently caching settings
are not changed during the lifetime of an object, although that might
change moving forward if we run into performance issues or issues with
WC system page allocations.
Also introduce gpu_binds_iomem() and cpu_maps_iomem() to clean up the
various ways we previously used to detect this.
Finally, initialize the TTM object reserved to be able to update
flags and caching before anyone else gets hold of the object.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624084240.270219-3-thomas.hellstrom@linux.intel.com

drm/i915: Update object placement flags to be mutable

The object ops i915_GEM_OBJECT_HAS_IOMEM and the object
I915_BO_ALLOC_STRUCT_PAGE flags are considered immutable by
much of our code. Introduce a new mem_flags member to hold these
and make sure checks for these flags being set are either done
under the object lock or with pages properly pinned. The flags
will change during migration under the object lock.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624084240.270219-2-thomas.hellstrom@linux.intel.com

drm/i915/ttm: fix static warning

warning: symbol 'i915_gem_ttm_obj_ops' was not declared. Should it be static?

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210623143411.293630-1-matthew.auld@intel.com

drm/i915/eb: Fix pagefault disabling in the first slowpath

In

commit ebc0808fa2da0548a78e715858024cb81cd732bc
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Oct 18 13:02:51 2016 +0100

    drm/i915: Restrict pagefault disabling to just around copy_from_user()

we entirely missed that there's a slow path call to eb_relocate_entry
(or i915_gem_execbuffer_relocate_entry as it was called back then)
which was left fully wrapped by pagefault_disable/enable() calls.
Previously any issues with blocking calls where handled by the
following code:

/* we can't wait for rendering with pagefaults disabled */
if (pagefault_disabled() && !object_is_idle(obj))
return -EFAULT;

Now at this point the prefaulting was still around, which means in
normal applications it was very hard to hit this bug. No idea why the
regressions in igts weren't caught.

Now this all changed big time with 2 patches merged closely together.

First

commit 2889caa9232109afc8881f29a2205abeb5709d0c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jun 16 15:05:19 2017 +0100

    drm/i915: Eliminate lots of iterations over the execobjects array

removes the prefaulting from the first relocation path, pushing it into
the first slowpath (of which this patch added a total of 3 escalation
levels). This would have really quickly uncovered the above bug, were
it not for immediate adding a duct-tape on top with

commit 7dd4f6729f9243bd7046c6f04c107a456bda38eb
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jun 16 15:05:24 2017 +0100

    drm/i915: Async GPU relocation processing

by pushing all all the relocation patching to the gpu if the buffer
was busy, which avoided all the possible blocking calls.

The entire slowpath was then furthermore ditched in

commit 7dc8f1143778a35b190f9413f228b3cf28f67f8d
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Mar 11 16:03:10 2020 +0000

        drm/i915/gem: Drop relocation slowpath

and resurrected in

commit fd1500fcd4420eee06e2c7f3aa6067b78ac05871
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Wed Aug 19 16:08:43 2020 +0200

        Revert "drm/i915/gem: Drop relocation slowpath".

but this did not further impact what's going on.

Since pagefault_disable/enable is an atomic section, any sleeping in
there is prohibited, and we definitely do that without gpu relocations
since we have to wait for the gpu usage to finish before we can patch
up the relocations.

Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618214503.1773805-1-daniel.vetter@ffwll.ch

drm/i915: Document the Virtual Engine uAPI

A little bit of documentation covering the topics of engine discovery,
context engine maps and virtual engines. It is not very detailed but
supposed to be a starting point of giving a brief high level overview of
general principles and intended use cases.

v2:
 * Have the text in uapi header and link from there.

v4:
 * Link from driver-uapi.rst.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618150036.2507653-1-tvrtko.ursulin@linux.intel.com

drm/i915/doc: Include GuC ABI documentation

GuC ABI documentation is now ready to be included in i915.rst

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616001302.84233-4-matthew.brost@intel.com

drm/i915/guc: Update firmware to v62.0.0

Most of the changes to the 62.0.0 firmware revolved around CTB
communication channel. Conform to the new (stable) CTB protocol.

v2:
 (Michal)
  Add values back to kernel DOC for actions
 (Docs)
  Add 'CT buffer' back in to fix warning

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
[mattrope: Tweaked kerneldoc while pushing as suggested by Daniele/Michal]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616001302.84233-3-matthew.brost@intel.com

drm/i915/guc: Introduce unified HXG messages

New GuC firmware will unify format of MMIO and CTB H2G messages.
Introduce their definitions now to allow gradual transition of
our code to match new changes.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616001302.84233-2-matthew.brost@intel.com

drm/i915: Move submission tasklet to i915_sched_engine

The submission tasklet operates on i915_sched_engine, thus it is the
correct place for it.

v3:
 (Jason Ekstrand)
  Change sched_engine->engine to a void* private data pointer
  Add kernel doc
v4:
 (Daniele)
  Update private_data comment
  Set queue_priority_hint in kick_execlists
v5:
 (CI)
  Rebase and fix build error

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618010638.98941-9-matthew.brost@intel.com

drm/i915: Update i915_scheduler to operate on i915_sched_engine

Rather passing around an intel_engine_cs in the scheduling code, pass
around a i915_sched_engine.

v3:
 (Jason Ekstrand)
  Add READ_ONCE around rq->engine in lock_sched_engine

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618010638.98941-8-matthew.brost@intel.com

drm/i915: Add kick_backend function to i915_sched_engine

Not all back-ends require a kick after a  scheduling update, so make the
kick a call-back function that the  back-end can opt-in to. Also move
the current kick function from the scheduler to the execlists file as it
is specific to that back-end.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618010638.98941-7-matthew.brost@intel.com

drm/i915: Move engine->schedule to i915_sched_engine

The schedule function should be in the schedule object.

v3:
 (Jason Ekstrand)
  Add kernel doc

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618010638.98941-6-matthew.brost@intel.com

drm/i915: Move active tracking to i915_sched_engine

Move active request tracking and its lock to i915_sched_engine. This
lock is also the submission lock so having it in the i915_sched_engine
is the correct place.

v3:
 (Jason Ekstrand)
  Add kernel doc
v6:
  Rebase

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.comk>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618010638.98941-5-matthew.brost@intel.com

drm/i915: Reset sched_engine.no_priolist immediately after dequeue

Rather than touching schedule state in the generic PM code, reset the
priolist allocation when empty in the submission code. Add a wrapper
function to do this and update the backends to call it in the correct
place.

v3:
 (Jason Ekstrand)
  Update patch commit message with a better description

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618010638.98941-4-matthew.brost@intel.com

drm/i915: Add i915_sched_engine_is_empty function

Add wrapper function around RB tree to determine if i915_sched_engine is
empty.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618010638.98941-3-matthew.brost@intel.com

drm/i915: Move priolist to new i915_sched_engine object

Introduce i915_sched_engine object which is lower level data structure
that i915_scheduler / generic code can operate on without touching
execlist specific structures. This allows additional submission backends
to be added without breaking the layering. Currently the execlists
backend uses 1 of these object per each engine (physical or virtual) but
future backends like the GuC will point to less instances utilizing the
reference counting.

This is a bit of detour to integrating the i915 with the DRM scheduler
but this object will still exist when the DRM scheduler lands in the
i915. It will however look a bit different. It will encapsulate the
drm_gpu_scheduler object plus and common variables (to the backends)
related to scheduling. Regardless this is a step in the right direction.

This patch starts the aforementioned transition by moving the priolist
into the i915_sched_engine object.

v3:
 (Jason Ekstrand)
  Update comment next to intel_engine_cs.virtual
  Add kernel doc
 (Checkpatch)
  Fix double the in commit message
v4:
 (Daniele)
  Update comment message.
  Add comment about subclass field

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618010638.98941-2-matthew.brost@intel.com

drm/i915/selftests: add back the selftest() hook for the buddy

When we resurrected the selftest we forgot to add back the selftest()
hook, meaning the test is not currently run.

References: d148738923fd ("drm/i915/ttm Initialize the ttm device and memory managers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618133150.700375-1-matthew.auld@intel.com

drm/i915/ttm: Fix incorrect assumptions about ttm_bo_validate() semantics

We have assumed that if the current placement was not the requested
placement, but instead one of the busy placements, a TTM move would have
been triggered. That is not the case.

So when we initially place LMEM objects in "Limbo", (that is system
placement without any pages allocated), to be able to defer clearing
objects until first get_pages(), the first get_pages() would happily keep
objects in system memory if that is one of the allowed placements. And
since we don't yet support i915 GEM system memory from TTM, everything
breaks apart.

So make sure we try the requested placement first, if no eviction is
needed. If that fails, retry with all allowed placements also allowing
evictions. Also make sure we handle TTM failure codes correctly.

Also temporarily (until we support i915 GEM system on TTM), restrict
allowed placements to the requested placement to avoid things falling
apart should LMEM be full.

Fixes: 38f28c0695c0 ("drm/i915/ttm: Calculate the object placement at get_pages time")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618132515.163277-1-thomas.hellstrom@linux.intel.com

drm/i915: Add support for explicit L3BANK steering

Because Render Power Gating restricts us to just a single subslice as a
valid steering target for reads of multicast registers in a SUBSLICE
range, the default steering we setup at init may not lead to a suitable
target for L3BANK multicast register.  In cases where it does not, use
explicit runtime steering whenever an L3BANK multicast register is read.

While we're at it, let's simplify the function a little bit and drop its
support for gen10/CNL since no such platforms ever materialized for real
use.  Multicast register steering is already an area that causes enough
confusion; no need to complicate it with what's effectively dead code.

v2:
 - Use gt->uncore instead of gt->i915->uncore.  (Tvrtko)
 - Use {} as table terminator.  (Rodrigo)

v3:
 - L3bank fuse register is a disable mask rather than an enable mask.
   We need to invert it before use.  (CI)

v4:
 - L3bank ID goes in the subslice field, not the slice field.  (CI)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617211425.1943662-4-matthew.d.roper@intel.com

drm/i915: Add GT support for multiple types of multicast steering

Although most of our multicast registers are replicated per-subslice, we
also have a small number of multicast registers that are replicated
per-l3 bank instead.  For both types of multicast registers we need to
make sure we steer reads of these registers to a valid instance.
Ideally we'd like to find a specific instance ID that would steer reads
of either type of multicast register to a valid instance (i.e., not
fused off and not powered down), but sometimes the combination of
part-specific fusing and the additional restrictions imposed by Render
Power Gating make it impossible to find any overlap between the set of
valid subslices and valid l3 banks.  This problem will become even more
noticeable on our upcoming platforms since they will be adding
additional types of multicast registers with new types of replication
and rules for finding valid instances for reads.

To handle this we'll continue to pick a suitable subslice instance at
driver startup and program this as the default (sliceid,subsliceid)
setting in the steering control register (0xFDC).  In cases where we
need to read another type of multicast GT register, but the default
subslice steering would not correspond to a valid instance, we'll
explicitly re-steer the single read to a valid value, perform the read,
and then reset the steering to it's "subslice" default.

This patch adds the general functionality to prepare for this explicit
steering of other multicast register types.  We'll plug L3 bank steering
into this in the next patch, and then add additional types of multicast
registers when the support for our next upcoming platform arrives.

v2:
 - Use entry->end==0 as table terminator.  (Rodrigo)
 - Grab forcewake in wa_list_verify() now that we're using accessors
   that assume forcewake is already held.

v3:
 - Fix loop condition when iterating over steering range tables.
   (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617211425.1943662-3-matthew.d.roper@intel.com

drm/i915: extract steered reg access to common function

New steering cases will be added in the follow-up patches, so prepare a
common helper to avoid code duplication.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617211425.1943662-2-matthew.d.roper@intel.com

drm/i915: Remove duplicate include of intel_region_lmem.h

Fix the following checkinclude.pl warning:
drivers/gpu/drm/i915/gt/intel_region_lmem.c
8 #include "intel_region_lmem.h"
     12 #include "intel_region_lmem.h"

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615113522.6867-1-wanjiabing@vivo.com

drm/i915: Perform execbuffer object locking as a separate step

To help avoid evicting already resident buffers from the batch we're
processing, perform locking as a separate step.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615113600.30660-1-thomas.hellstrom@linux.intel.com

drm/i915/gem: Zap the i915_gem_object_blt code

It's unused with the exception of selftest. Replace a call in the
memory_region live selftest with a call into a corresponding
function in the new migrate code.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617063018.92802-13-thomas.hellstrom@linux.intel.com

drm/i915/gem: Zap the client blt code

It's not used anywhere.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617063018.92802-12-thomas.hellstrom@linux.intel.com

drm/i915/ttm: accelerated move implementation

Invokes the pipelined page migration through blt, for
i915_ttm_move requests of eviction and also obj clear.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617063018.92802-11-thomas.hellstrom@linux.intel.com

drm/i915/gt: Setup a default migration context on the GT

Set up a default migration context on the GT and use it from the
selftests.
Add a perf selftest and make sure we exercise LMEM if available.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617063018.92802-10-thomas.hellstrom@linux.intel.com

drm/i915/gt: Pipelined clear

Update the PTE and emit a clear within a single unpreemptible packet
such that we can schedule and pipeline clears.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617063018.92802-9-thomas.hellstrom@linux.intel.com

drm/i915/gt: Pipelined page migration

If we pipeline the PTE updates and then do the copy of those pages
within a single unpreemptible command packet, we can submit the copies
and leave them to be scheduled without having to synchronously wait
under a global lock. In order to manage migration, we need to
preallocate the page tables (and keep them pinned and available for use
at any time), causing a bottleneck for migrations as all clients must
contend on the limited resources. By inlining the ppGTT updates and
performing the blit atomically, each client only owns the PTE while in
use, and so we can reschedule individual operations however we see fit.
And most importantly, we do not need to take a global lock on the shared
vm, and wait until the operation is complete before releasing the lock
for others to claim the PTE for themselves.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617063018.92802-8-thomas.hellstrom@linux.intel.com

drm/i915/gt: Export the pinned context constructor and destructor

Allow internal clients to create and destroy a pinned context.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617063018.92802-7-thomas.hellstrom@linux.intel.com

drm/i915/gt: Add a routine to iterate over the pagetables of a GTT

In the next patch, we will want to look at the dma addresses of
individual page tables, so add a routine to iterate over them.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617063018.92802-6-thomas.hellstrom@linux.intel.com

drm/i915/gt: Add an insert_entry for gen8_ppgtt

In the next patch, we will want to write a PTE for an explicit
dma address, outside of the usual vma.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617063018.92802-5-thomas.hellstrom@linux.intel.com

drm/i915: Introduce a ww transaction helper

Introduce a for_i915_gem_ww(){} utility to help make the code
around a ww transaction more readable.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617063018.92802-4-thomas.hellstrom@linux.intel.com

drm/i915: Break out dma_resv ww locking utilities to separate files

As we're about to add more ww-related functionality,
break out the dma_resv ww locking utilities to their own files

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617063018.92802-3-thomas.hellstrom@linux.intel.com

drm/i915: Reference objects on the ww object list

Since the ww transaction endpoint easily end up far out-of-scope of
the objects on the ww object list, particularly for contending lock
objects, make sure we reference objects on the list so they don't
disappear under us.

This comes with a performance penalty so it's been debated whether this
is really needed. But I think this is motivated by the fact that locking
is typically difficult to get right, and whatever we can do to make it
simpler for developers moving forward should be done, unless the
performance impact is far too high.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617063018.92802-2-thomas.hellstrom@linux.intel.com

drm/i915/ttm: remove unused function

intel_region_ttm_node_free is no longer used. Also fixup the related
kerneldoc.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617083719.497619-1-matthew.auld@intel.com

drm/i915/gem: Remove duplicated call to ops->pread

Between

commit ae30af84edb5b7cc95485922e43afd909a892e1b
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Tue Mar 23 16:50:00 2021 +0100

    drm/i915: Disable userptr pread/pwrite support.

and

commit 0049b688459b846f819b6e51c24cd0781fcfde41
Author: Matthew Auld <matthew.auld@intel.com>
Date:   Thu Nov 5 15:49:33 2020 +0000

    drm/i915/gem: Allow backends to override pread implementation

this accidentally landed twice.

Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616090350.828696-1-daniel.vetter@ffwll.ch

drm/i915/ttm: restore min_page_size behaviour

We now have bo->page_alignment which perfectly describes what we need if
we have min page size restrictions for lmem. We can also drop the flag
here, since this is the default behaviour for all objects.

v2(Thomas):
    - bo->page_alignment is in page units

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616152501.394518-7-matthew.auld@intel.com

drm/i915/ttm: switch over to ttm_buddy_man

Move back to the buddy allocator for managing device local memory, and
restore the lost mock selftests. Keep around the range manager related
bits, since we likely need this for managing stolen at some point. For
stolen we also don't need to reserve anything so no need to support a
generic reserve interface.

v2(Thomas):
    - bo->page_alignment is in page units, not bytes

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616152501.394518-6-matthew.auld@intel.com

drm/i915/ttm: remove node usage in our naming

Now that ttm_resource_manager just returns a generic ttm_resource we
don't need to reference the mm_node stuff anymore which mostly only
makes sense for drm_mm_node. In the next few patches we want switch over
to the ttm_buddy_man which is just another type of ttm_resource so
reflect that in the naming.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616152501.394518-5-matthew.auld@intel.com

drm/i915/ttm: pass along the I915_BO_ALLOC_CONTIGUOUS

Currently we just ignore the I915_BO_ALLOC_CONTIGUOUS flag, which is
fine since everything is already contiguous with the ttm range manager.
However in the next patch we want to switch over to the ttm buddy
manager, where allocations are by default not contiguous.

v2(Thomas):
    - Forward ALLOC_CONTIG for all regions

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616152501.394518-4-matthew.auld@intel.com

drm/i915/ttm: Calculate the object placement at get_pages time

Instead of relying on a static placement, calculate at get_pages() time.
This should work for LMEM regions and system for now. For stolen we need
to take preallocated range into account. That will if needed be added
later.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616152501.394518-3-matthew.auld@intel.com

drm/i915/ttm: add i915_sg_from_buddy_resource

We need to be able to build an sg table from our list of buddy blocks,
so that we can later plug this into our ttm backend, and replace our use
of the range manager.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616152501.394518-2-matthew.auld@intel.com

drm/i915/ttm: add ttm_buddy_man

Add back our standalone i915_buddy allocator and integrate it into a
ttm_resource_manager. This will plug into our ttm backend for managing
device local-memory in the next couple of patches.

v2(Thomas):
    - Return -ENOSPC from the buddy; ttm expects this in order to
      trigger eviction
    - Drop the unnecessary inline
    - bo->page_alignment is in page units

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616152501.394518-1-matthew.auld@intel.com

drm/i915/ttm: Fix memory leaks

Fix two memory leaks introduced with the ttm backend.

Fixes: 213d50927763 ("drm/i915/ttm: Introduce a TTM i915 gem object backend")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615122408.32347-1-thomas.hellstrom@linux.intel.com

drm/i915/adl_p: Add initial ADL_P Workarounds

Most of the context WA are already implemented.
Adding adl_p platform tag to reflect so.

v2: adjust comments for clarity (MattR)

BSpec: 54369
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608174721.17593-1-clinton.a.taylor@intel.com

drm/i915: Simplify userptr locking

Use an rwlock instead of spinlock for the global notifier lock
to reduce risk of contention in execbuf.

Protect object state with the object lock whenever possible rather
than with the global notifier lock

Don't take an explicit page_ref in userptr_submit_init() but rather
call get_pages() after obtaining the page list so that
get_pages() holds the page_ref. This means we don't need to call
userptr_submit_fini(), which is needed to avoid awkward locking
in our upcoming VM_BIND code.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610143525.624677-1-thomas.hellstrom@linux.intel.com

drm/i915/selftests: Reorder tasklet_disable vs local_bh_disable

Due to a change in requirements that disallows tasklet_disable() being
called from atomic context, rearrange the selftest to avoid doing so.

<3> [324.942939] BUG: sleeping function called from invalid context at kernel/softirq.c:888
<3> [324.942952] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 5601, name: i915_selftest
<4> [324.942960] 1 lock held by i915_selftest/5601:
<4> [324.942963]  #0: ffff888101d19240 (&dev->mutex){....}-{3:3}, at: device_driver_attach+0x18/0x50
<3> [324.942987] Preemption disabled at:
<3> [324.942990] [<ffffffffa026fbd2>] live_hold_reset.part.65+0xc2/0x2f0 [i915]
<4> [324.943255] CPU: 0 PID: 5601 Comm: i915_selftest Tainted: G     U            5.13.0-rc5-CI-CI_DRM_10197+ #1
<4> [324.943259] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017
<4> [324.943263] Call Trace:
<4> [324.943267]  dump_stack+0x7f/0xad
<4> [324.943276]  ___might_sleep.cold.123+0xf2/0x106
<4> [324.943286]  tasklet_unlock_wait+0x2e/0xb0
<4> [324.943291]  ? ktime_get_raw+0x81/0x120
<4> [324.943305]  live_hold_reset.part.65+0x1ab/0x2f0 [i915]
<4> [324.943500]  __i915_subtests.cold.7+0x42/0x92 [i915]
<4> [324.943723]  ? __i915_live_teardown+0x50/0x50 [i915]
<4> [324.943922]  ? __intel_gt_live_setup+0x30/0x30 [i915]

Fixes: da044747401fc ("tasklets: Replace spin wait in tasklet_unlock_wait()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611060838.647973-1-thomas.hellstrom@linux.intel.com

Merge tag 'topic/i915-ttm-2021-06-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-intel-gt-next

drm-misc and drm-intel pull request for topic/i915-ttm:
- Convert i915 lmem handling to ttm.
- Add a patch to temporarily add a driver_private member to vma_node.
- Use this to allow mixed object mmap handling for i915.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eb71ee2d-3413-6ca8-0b7c-a58695f00b77@linux.intel.com

drm/i915: Fix busy ioctl commentary

Just tidy one instance of incorrect context parameter name and a stray
sentence ending from before reporting was converted to be class based.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611132221.1055650-1-tvrtko.ursulin@linux.intel.com