review.tizen.org Git - platform/kernel/linux-exynos.git/log

block: fix warning when I/O elevator is changed as request_queue is being removed

There is a race between changing I/O elevator and request_queue removal
which can trigger the warning in kobject_add_internal. A program can
use sysfs to request a change of elevator at the same time another task
is unregistering the request_queue the elevator would be attached to.
The elevator's kobject will then attempt to be connected to the
request_queue in the object tree when the request_queue has just been
removed from sysfs. This triggers the warning in kobject_add_internal
as the request_queue no longer has a sysfs directory:

kobject_add_internal failed for iosched (error: -2 parent: queue)
------------[ cut here ]------------
WARNING: CPU: 3 PID: 14075 at lib/kobject.c:244 kobject_add_internal+0x103/0x2d0

To fix this warning, we can check the QUEUE_FLAG_REGISTERED flag when
changing the elevator and use the request_queue's sysfs_lock to
serialize between clearing the flag and the elevator testing the flag.

Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block, scheduler: convert xxx_var_store to void

The last parameter "count" never be used in xxx_var_store,
convert these functions to void.

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove SKD_ID_INCR

The SKD_ID_INCR flag in skd_request_context.id duplicates information
that is already available otherwise, e.g. through the block layer
request state and through skd_request_context.state. Hence remove
the code that manipulates this flag and also the flag itself.
Since skd_isr_completion_posted() only uses the lower bits of
skd_request_context.id as hardware tag, this patch does not change
the behavior of the skd driver. I'm referring to the following code:

tag = req_id & SKD_ID_SLOT_AND_TABLE_MASK;

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Make it easier for static analyzers to analyze skd_free_disk()

Although it is easy to see that skdev->disk != NULL if skdev->queue
!= NULL, add a test for skdev->disk to avoid that smatch reports the
following warning:

drivers/block/skd_main.c:3080 skd_free_disk()
error: we previously assumed 'disk' could be null (see line 3074)

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Inline skd_end_request()

It is not worth to keep the debug statements in skd_end_request().
Without debug statements that function only consists of two
statements. Hence inline skd_end_request().

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Rename skd_softirq_done() into skd_complete_rq()

The latter name follows more closely the function names used in
other blk-mq drivers.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block/nullb: fix NULL dereference

Dan reported this:

The patch 2984c8684f96: "nullb: factor disk parameters" from Aug 14,
2017, leads to the following Smatch complaint:

drivers/block/null_blk.c:1759 null_init_tag_set()
error: we previously assumed 'nullb' could be null (see line
1750)

  1755 set->cmd_size = sizeof(struct nullb_cmd);
  1756 set->flags = BLK_MQ_F_SHOULD_MERGE;
  1757 set->driver_data = NULL;
  1758
  1759 if (nullb->dev->blocking)
                    ^^^^^^^^^^^^^^^^^^^^
And an unchecked dereference.

nullb could be NULL here.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blkcg: avoid free blkcg_root when failed to alloc blkcg policy

this patch fix two errors, firstly avoid kfree blk_root, secondly not
free(blkcg) ,if blkcg alloc fail(blkcg == NULL), just unlock that mutex;

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

null_blk: update email adress

Update to a working one, the fusionio address hasn't been valid
in 4 years.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: update comments to reflect REQ_FLUSH -> REQ_PREFLUSH rename

Normally I wouldn't bother with this, but in my opinion the comments are
the most important part of this whole file since without them no one
would have any clue how this insanity works.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

compat_hdio_ioctl: Fix a declaration

This patch avoids that sparse reports the following warning messages:

block/compat_ioctl.c:85:11: warning: incorrect type in assignment (different address spaces)
block/compat_ioctl.c:85:11:    expected unsigned long *[noderef] <asn:1>p
block/compat_ioctl.c:85:11:    got void [noderef] <asn:1>*
block/compat_ioctl.c:91:21: warning: incorrect type in argument 1 (different address spaces)
block/compat_ioctl.c:91:21:    expected void const volatile [noderef] <asn:1>*<noident>
block/compat_ioctl.c:91:21:    got unsigned long *[noderef] <asn:1>p
block/compat_ioctl.c:87:53: warning: dereference of noderef expression
block/compat_ioctl.c:91:21: warning: dereference of noderef expression

Fixes: commit d597580d3737 ("generic ...copy_..._user primitives")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove blk_free_devt in add_partition

put_device(pdev) will call pdev->type->release finally, and blk_free_devt
has been called in part_release(), so remove it.

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bio-integrity: Fix regression if profile verify_fn is NULL

In dm-integrity target we register integrity profile that have
both generate_fn and verify_fn callbacks set to NULL.

This is used if dm-integrity is stacked under a dm-crypt device
for authenticated encryption (integrity payload contains authentication
tag and IV seed).

In this case the verification is done through own crypto API
processing inside dm-crypt; integrity profile is only holder
of these data. (And memory is owned by dm-crypt as well.)

After the commit (and previous changes)
  Commit 7c20f11680a441df09de7235206f70115fbf6290
  Author: Christoph Hellwig <hch@lst.de>
  Date:   Mon Jul 3 16:58:43 2017 -0600

    bio-integrity: stop abusing bi_end_io

we get this crash:

: BUG: unable to handle kernel NULL pointer dereference at   (null)
: IP:   (null)
: *pde = 00000000
...
:
: Workqueue: kintegrityd bio_integrity_verify_fn
: task: f48ae180 task.stack: f4b5c000
: EIP:   (null)
: EFLAGS: 00210286 CPU: 0
: EAX: f4b5debc EBX: 00001000 ECX: 00000001 EDX: 00000000
: ESI: 00001000 EDI: ed25f000 EBP: f4b5dee8 ESP: f4b5dea4
:  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
: CR0: 80050033 CR2: 00000000 CR3: 32823000 CR4: 001406d0
: Call Trace:
:  ? bio_integrity_process+0xe3/0x1e0
:  bio_integrity_verify_fn+0xea/0x150
:  process_one_work+0x1c7/0x5c0
:  worker_thread+0x39/0x380
:  kthread+0xd6/0x110
:  ? process_one_work+0x5c0/0x5c0
:  ? kthread_worker_fn+0x100/0x100
:  ? kthread_worker_fn+0x100/0x100
:  ret_from_fork+0x19/0x24
: Code:  Bad EIP value.
: EIP:   (null) SS:ESP: 0068:f4b5dea4
: CR2: 0000000000000000

Patch just skip the whole verify workqueue if verify_fn is set to NULL.

Fixes: 7c20f116 ("bio-integrity: stop abusing bi_end_io")
Signed-off-by: Milan Broz <gmazyland@gmail.com>
[hch: trivial whitespace fix]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block, bfq: fix error handle in bfq_init

if elv_register fail, bfq_pool should be free.

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: replace bi_bdev with a gendisk pointer and partitions index

This way we don't need a block_device structure to submit I/O.  The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open.  Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).

For the actual I/O path all that we need is the gendisk, which exists
once per block device.  But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.

Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: cache the partition index in struct block_device

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: add a __disk_get_part helper

This helper allows looking up a partion under RCU protection without
grabbing a reference to it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: reject attempts to allocate more than DISK_MAX_PARTS partitions

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

raid5: remove a call to get_start_sect

The block layer always remaps partitions before calling into the
->make_request methods of drivers. Thus the call to get_start_sect in
in_chunk_boundary will always return 0 and can be removed.

Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

btrfs: index check-integrity state hash by a dev_t

We won't have the struct block_device available in the bio soon, so switch
to the numerical dev_t instead of the block_device pointer for looking up
the check-integrity state.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Change default interrupt mode to MSI-X

Since MSI support on some motherboards is unreliable, change the
default interrupt mode from MSI to MSI-X. This patch avoids that
the following message appears sporadially in the kernel logs of
my test setup:

do_IRQ: 3.193 No irq handler for vector

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Avoid double completions in case of a timeout

Avoid that normal request completion and the timeout handler can
run concurrently by calling blk_mq_complete_request() instead of
blk_mq_end_request() from skd_end_request(). Avoid that the block
layer can reuse a request while the firmware is still processing
it. Convert skd_softirq_done() to blk-mq. Pass the pointer to
skd_softirq_done() to the block layer core through
blk_mq_ops.complete instead of by calling blk_queue_softirq_done().
Pass the pointer to skd_timed_out() to the block layer core
through blk_mq_ops.timeout instead of by calling
blk_queue_timed_out(). The timeout handler has been tested as
follows:

    echo 1 > /sys/block/skd0/io-timeout-fail &&
    (cd /sys/kernel/debug/fail_io_timeout &&
      echo 100 > probability &&
      echo N > task-filter &&
      echo 1 > times)

Fixes: commit a74d5b76fab9 ("skd: Switch to block layer timeout mechanism")
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Inline skd_process_request()

This patch does not change any functionality but makes the skd
driver code more similar to that of other blk-mq kernel drivers.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Report completion mismatches once

This patch removes one debug statement but otherwise does not change
any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: Warn if blk_queue_rq_timed_out() is called for a blk-mq queue

The timeout handler set by blk_queue_rq_timed_out() is only used
in single queue mode. Calling this function for blk-mq drivers is
wrong. Hence issue a warning if this function is called by a blk-mq
driver.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nullb: badbblocks support

Sometime disk could have tracks broken and data there is inaccessable,
but data in other parts can be accessed in normal way. MD RAID supports
such disks. But we don't have a good way to test it, because we can't
control which part of a physical disk is bad. For a virtual disk, this
can be easily controlled.

This patch adds a new 'badblock' attribute. Configure it in this way:
echo "+1-100" > xxx/badblock, this will make sector [1-100] as bad
blocks.
echo "-20-30" > xxx/badblock, this will make sector [20-30] good

If badblocks are accessed, the nullb disk will return IO error. Other
parts of the disk can accessed in normal way.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nullb: emulate cache

Software must flush disk cache to guarantee data safety. To check if
software correctly does disk cache flush, we must know the behavior of
disk. But physical disk behavior is uncontrollable. Even software
doesn't do the flush, the disk probably does the flush. This patch tries
to emulate a cache in the test disk.

All write will go to a cache first, when the cache is full, we then
flush some data to disk storage. A flush request will flush all data of
the cache to disk storage. A FUA write will write to memory store
directly and revalidate data in cache. If there is a power failure (by
writing to power attribute, 'echo 0 > disk_name/power'), we discard all
data in the cache, but preserve the data in disk storage. Later we can
power on the disk again as usual (write 1 to 'power' attribute), then we
can check data integrity and very if software does everything correctly.

A new attribute 'cache_size' (in MB) is added to configure cache size.

Based on original patch from Kyungchan Koh

Signed-off-by: Kyungchan Koh <kkc6196@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nullb: bandwidth control

In test, we usually expect controllable disk speed. For example, in a
raid array, we'd like some disks are fast and some are slow. MD RAID
actually has a feature for this. To test the feature, we'd like to make
the disk run in specific speed.

block throttling probably can be used for this purpose, but it requires
cgroup setup. Here we just implement a simple throttling mechanism in
the driver. There is slight fluctuation in the mechanism, but it's good
enough for test.

To configure the bandwidth cap, user sets the 'mbps' attribute. mbps is
MB/s.

Based on original patch from Kyungchan Koh

Signed-off-by: Kyungchan Koh <kkc6196@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nullb: support discard

discard makes sense for memory backed disk. And also it's useful to test
if upper layer supports dicard correctly.

User configures 'discard' attribute to enable/disable dicard support.

Based on original patch from Kyungchan Koh

Signed-off-by: Kyungchan Koh <kkc6196@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nullb: support memory backed store

This adds memory backed store in nullb.

User configure 'memory_backed' attribute for this. By default, nullb
disk doesn't use memory backed store.

Based on original patch from Kyungchan Koh

Signed-off-by: Kyungchan Koh <kkc6196@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nullb: use ida to manage index

We now dynamically create disks. Managing the disk index with ida to
avoid bump up the index too much.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nullb: add interface to power on disk

The device created in nullb configfs interface isn't power on by
default. After user configures the device, user can do 'echo 1 >
xxx/nullb/device_name/power' to power on the device, which will create a
disk. the xxx/nullb/device_name/index is the disk index, so if the index
is 2, the new created disk should be named as /dev/nullb2. Note, the
'index' is only valid after disk is power on.

'echo 0 > xxx/nullb/device_name/power' will remove the disk. Note, this
doesn't remove the device. To remove the device, user should do 'rmdir
xxx/nullb/device_name'. Removing the device will remove the disk too.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nullb: add configfs interface

Add configfs interface for nullb. configfs interface is more flexible
and easy to configure in a per-disk basis.

Configuration is something like this:
mount -t configfs none /mnt

Checking which features the driver supports:
cat /mnt/nullb/features

The 'features' attribute is for future extension. We probably will add
new features into the driver, userspace can check this attribute to find
the supported features.

Create/remove a device:
mkdir/rmdir /mnt/nullb/a

Then configure the device by setting attributes under /mnt/nullb/a, most
of nullb supported module parameters are converted to attributes:
size; /* device size in MB */
completion_nsec; /* time in ns to complete a request */
submit_queues; /* number of submission queues */
home_node; /* home node for the device */
queue_mode; /* block interface */
blocksize; /* block size */
irqmode; /* IRQ completion handler */
hw_queue_depth; /* queue depth */
use_lightnvm; /* register as a LightNVM device */
blocking; /* blocking blk-mq device */
use_per_node_hctx; /* use per-node allocation for hardware context */

Note, creating a device doesn't create a disk immediately. Creating a
disk is done in two phases: create a device and then power on the
device. Next patch will introduce device power on.

Based on original patch from Kyungchan Koh

Signed-off-by: Kyungchan Koh <kkc6196@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nullb: factor disk parameters

When we switch to configfs interface, each disk could have different
configuration. To prepare for the change, we move most disk setting to a
separate data structure. The existing module parameter interface is
kept. The 'nr_devices' and 'shared_tags' don't make sense for per-disk
setting, so they are remained as global settings.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: error pointer dereference in skd_cons_disk()

My initial impulse was to check for IS_ERR_OR_NULL() but when I looked
at this code a bit more closely, we should only need to check for
IS_ERR().

The blk_mq_alloc_tag_set() returns negative error codes and zero on
success so we can just do an "if (rc) goto err_out;".  It's better to
preserve the error code anyhow.  The blk_mq_init_queue() returns error
pointers on failure, it never returns NULL.  We can also remove the
"q = NULL;" at the start because that's no longer needed.

Fixes: ca33dd92968b ("skd: Convert to blk-mq")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Uninitialized variable in skd_isr_completion_posted()

Someone got too agressive about removing initializations and
accidentally removed the "rc = 0;" which is required.

Fixes: c830da8cbc7b ("skd: Remove superfluous initializations from skd_isr_completion_posted()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove driver version information

Remove the driver version information because this information
is not useful in an upstream kernel driver.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Bump driver version

Bump the driver version. Remove the build ID because build IDs do
not make sense for an upstream kernel driver. Keep the driver
version in the module information but do not report it during every
load, unload or probe.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Optimize locking

Only take skdev->lock if necessary.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove several local variables

This patch does not change any functionality but makes the code
more brief.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Reduce memory usage

Every single coherent DMA memory buffer occupies at least one page.
Reduce memory usage by switching from coherent buffers to streaming
DMA for I/O requests (struct skd_fitmsg_context) and S/G-lists
(struct fit_sg_descriptor[]).

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove skd_device.in_flight

Since skd_device.in_flight is only used to display the number of
in-flight requests in debug messages, remove that member and
introduce skd_in_flight(). That last function relies on the block
layer to determine the number of in flight requests.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Switch to block layer timeout mechanism

Remove the timeout slot variables and rely on the block layer to
detect request timeouts.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Convert to blk-mq

Introduce a tag set and a blk_mq_ops structure. Set .cmd_size such
that struct request and struct skd_request_context are allocated
through a single allocation. Remove the skd_request_context.req
pointer. Make queue starting asynchronous such that this can occur
safely from interrupt context. Use locking to protect skdev->skmsg
and *skdev->skmsg against concurrent access from concurrent
.queue_rq() calls. Introduce the functions skd_init_request() and
skd_exit_request() to set up / clean up the per-request S/G-list.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Coalesce struct request and struct skd_request_context

Set request_queue.cmd_size, introduce skd_init_rq() and skd_exit_rq()
and remove skd_device.skreq_table.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Move skd_free_sg_list() up

Issue a warning if a NULL argument is passed to skd_free_sg_list().
Move this function up to make the blk-mq conversion patch easier
to read.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Split skd_recover_requests()

This patch does not change any functionality but makes the blk-mq
conversion patch easier to read.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Introduce skd_process_request()

The only functional change in this patch is that the skd_fitmsg_context
in which requests are accumulated is changed from a local variable into
a member of struct skd_device. This patch will make the blk-mq conversion
easier.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Convert several per-device scalar variables into atomics

Convert the per-device scalar variables that are protected by the
queue lock into atomics such that it becomes safe to access these
variables without holding the queue lock.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Enable request tags for the block layer queue

Use the request tag when allocating a skd_fitmsg_context or
skd_request_context such that the lists used to track free elements
can be eliminated. Swap the skd_end_request() and skd_release_req()
calls to avoid triggering a use-after-free. Remove
skd_fitmsg_context.state and .outstanding because FIT messages are
shared among requests and because updating a FIT message after a
request has finished whould trigger a use-after-free.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Initialize skd_special_context.req.n_sg to one

The debug code in skd_send_special_fitmsg() assumes that req.n_sg
represents the number of S/G descriptors. However, skd_construct()
initializes that member variable to zero. Set req.n_sg to one such
that the debugging code in skd_send_special_fitmsg() works as
expected.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove dead code

Removing the SG IO code also removed the code that sets
SKD_REQ_STATE_ABORTED. Hence also remove the code that checks for
this state.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove SG IO support

The skd SG IO support duplicates the functionality of the bsg driver.
Hence remove it.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Convert explicit skd_request_fn() calls

This will make it easier to convert this driver to the blk-mq
approach. This patch also reduces interrupt latency by moving
skd_request_fn() calls out of the skd_isr() interrupt.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Rework request failing code path

Move the skd_fail_all_pending() call out of skd_request_fn_not_online()
such that this function can be reused in the blk-mq code path.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Move a function definition

This patch does not change any functionality but makes the next
patch in this series easier to read.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skb: Use symbolic names for SCSI opcodes

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Use kcalloc() instead of kzalloc() with multiply

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove superfluous occurrences of the 'volatile' keyword

mem_map[i] is accessed through readl() / writel() hence declaring
mem_map as volatile is not necessary.

Remove the volatile declarations from struct fit_completion_entry_v1
pointers and struct fit_comp_error_info since reading these structures
multiple times is safe.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove a redundant init_timer() call

Since setup_timer() invokes init_timer(), invoking init_timer()
just before setup_timer() is redundant. Hence remove the init_timer()
call.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Use for_each_sg()

This change makes skd_preop_sg_list() support chained sg-lists.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Drop second argument of skd_recover_requests()

Since all callers pass zero as second argument to skd_recover_requests(),
drop that second argument.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove superfluous initializations from skd_isr_completion_posted()

The value of skcmp, cmp_cntxt etc. is overwritten during every
loop iteration and is not used after the loop has finished. Hence
initializing these variables outside the loop is not necessary.
This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Simplify the code for handling data direction

Use DMA_FROM_DEVICE and DMA_TO_DEVICE directly instead of
introducing driver-private constants with the same numerical
value.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Use ARRAY_SIZE() where appropriate

Use ARRAY_SIZE() instead of open-coding it. This patch does not
change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Make the skd_isr() code more brief

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Use __packed only when needed

Since needless use of __packed slows down access to data structures,
only use __packed when needed.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Check structure sizes at build time

This patch will help to verify the changes made by the next patch.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Use a structure instead of hardcoding structure offsets

This change makes the source code easier to read.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Simplify the code for allocating DMA message buffers

dma_alloc_coherent() guarantees alignment on a page boundary so
no explicit alignment is needed to align on a 64 byte boundary.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Simplify the code for deciding whether or not to send a FIT msg

Due to the previous patch it is guaranteed that the FIT msg contains
at least one request after the for-loop has finished. Use this to
simplify the code.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Reorder the code in skd_process_request()

Prepare the S/G-list before allocating a FIT msg such that the FIT
msg always contains at least one request after the for-loop is
finished.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Fix size argument in skd_free_skcomp()

Pass the correct size to pci_free_consistent() in skd_free_skcomp().

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Introduce SKD_SKCOMP_SIZE

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Introduce the symbolic constant SKD_MAX_REQ_PER_MSG

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Document locking assumptions

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Fix endianness annotations

Ensure that sparse does not report any warnings when building the
skd driver with sparse verification enabled (C=1 or C=2).

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Switch from the pr_*() to the dev_*() logging functions

Use dev_err() and dev_info() instead of pr_err() and pr_info().
Since dev_dbg() is able to report file name and line number
information, remove __FILE__ and __LINE__ from the dev_dbg() calls.
Remove the struct skd_device members and the function (skd_name())
that became superfluous due to these changes.

This patch removes the device name and serial number from log
statements. An example of the old log line format:

(skd0:STM000196603:[0000:00:09.0]): Driver state STARTING(3)=>ONLINE(4)

An example of the new log line format:

skd:0000:00:09.0: Driver state STARTING(3)=>ONLINE(4)

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove useless barrier() calls

The purpose of barrier() is to prevent reordering by the compiler.
Since the compiler does not reorder calls to non-pure functions,
remove the barrier() calls from skd_reg_{read,write}{32,64}().

Since pr_debug() is able to report file name and line number
information, remove __FILE__ and __LINE__ from the pr_debug() calls.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove a set-but-not-used variable from struct skd_device

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove set-but-not-used local variables

These variables have been detected by building with W=1. Declare
'acc' as __maybe_unused because most access_ok() implementations
ignore their first argument. This patch does not change any
functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Fix a function name in a comment

There is no function skd_completion_posted_isr() in the skd driver
but there is a function called skd_isr_completion_posted(). Fix
the function name in the comment.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Fix spelling in a source code comment

Change "ptimal" into "optimal" and remove the misleading reference
to sysfs.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Avoid that gcc 7 warns about fall-through when building with W=1

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove unnecessary blank lines

This patch does not change any functionality but makes the skd
driver source code more uniform with that of other kernel drivers.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove ESXi code

Since the code guarded by #ifdef SKD_VMK_POLL_HANDLER / #endif
is never built on Linux systems, remove it.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Remove unneeded #include directives

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Update maintainer information

E-mails sent to support@stec-inc.com bounce. Hence remove that
e-mail address from the driver. Add an entry to the MAINTAINERS
file instead.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Switch to GPLv2

This change does not affect any skd driver version derived from a
dual licensed code base but makes all code derived from future
upstream skd driver versions GPLv2 only.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Submit requests to firmware before triggering the doorbell

Ensure that the members of struct skd_msg_buf have been transferred
to the PCIe adapter before the doorbell is triggered. This patch
avoids that I/O fails sporadically and that the following error
message is reported:

(skd0:STM000196603:[0000:00:09.0]): Completion mismatch comp_id=0x0000 skreq=0x0400 new=0x0000

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

skd: Avoid that module unloading triggers a use-after-free

Since put_disk() triggers a disk_release() call and since that
last function calls blk_put_queue() if disk->queue != NULL, clear
the disk->queue pointer before calling put_disk(). This avoids
that unloading the skd kernel module triggers the following
use-after-free:

WARNING: CPU: 8 PID: 297 at lib/refcount.c:128 refcount_sub_and_test+0x70/0x80
refcount_t: underflow; use-after-free.
CPU: 8 PID: 297 Comm: kworker/8:1 Not tainted 4.11.10-300.fc26.x86_64 #1
Workqueue: events work_for_cpu_fn
Call Trace:
dump_stack+0x63/0x84
__warn+0xcb/0xf0
warn_slowpath_fmt+0x5a/0x80
refcount_sub_and_test+0x70/0x80
refcount_dec_and_test+0x11/0x20
kobject_put+0x1f/0x50
blk_put_queue+0x15/0x20
disk_release+0xae/0xf0
device_release+0x32/0x90
kobject_release+0x67/0x170
kobject_put+0x2b/0x50
put_disk+0x17/0x20
skd_destruct+0x5c/0x890 [skd]
skd_pci_probe+0x124d/0x13a0 [skd]
local_pci_probe+0x42/0xa0
work_for_cpu_fn+0x14/0x20
process_one_work+0x19e/0x470
worker_thread+0x1dc/0x4a0
kthread+0x125/0x140
ret_from_fork+0x25/0x30

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: Relax a check in blk_start_queue()

Calling blk_start_queue() from interrupt context with the queue
lock held and without disabling IRQs, as the skd driver does, is
safe. This patch avoids that loading the skd driver triggers the
following warning:

WARNING: CPU: 11 PID: 1348 at block/blk-core.c:283 blk_start_queue+0x84/0xa0
RIP: 0010:blk_start_queue+0x84/0xa0
Call Trace:
skd_unquiesce_dev+0x12a/0x1d0 [skd]
skd_complete_internal+0x1e7/0x5a0 [skd]
skd_complete_other+0xc2/0xd0 [skd]
skd_isr_completion_posted.isra.30+0x2a5/0x470 [skd]
skd_isr+0x14f/0x180 [skd]
irq_forced_thread_fn+0x2a/0x70
irq_thread+0x144/0x1a0
kthread+0x125/0x140
ret_from_fork+0x2a/0x40

Fixes: commit a038e2536472 ("[PATCH] blk_start_queue() must be called with irq disabled - add warning")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

xen-blkfront: Avoid that gcc 7 warns about fall-through when building with W=1

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Roger Pau Monn303251 <roger.pau@citrix.com>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

xen-blkback: Avoid that gcc 7 warns about fall-through when building with W=1

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Roger Pau Monn303251 <roger.pau@citrix.com>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

xen-blkback: Fix indentation

Avoid that smatch reports the following warning when building with
C=2 CHECK="smatch -p=kernel":

drivers/block/xen-blkback/blkback.c:710 xen_blkbk_unmap_prepare() warn: inconsistent indenting

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Roger Pau Monn303251 <roger.pau@citrix.com>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

virtio_blk: Use blk_rq_is_scsi()

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ide-floppy: Use blk_rq_is_scsi()

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

genhd: Annotate all part and part_tbl pointer dereferences

Annotate gendisk.part_tbl and disk_part_tbl.part dereferences with
rcu_dereference_protected(). This patch does not change the behavior
of the modified code but ensures that sparse does not complain about
disk->part_tbl manipulations nor about part_tbl->part accesses.
Additionally, improve documentation of the locking requirements of
the modified functions.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>