Peter Maydell [Wed, 3 Aug 2011 22:04:49 +0000 (23:04 +0100)]
hw/pl061.c: Support GPIOAMSEL register
Support the GPIOAMSEL register found on some Stellaris boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 3 Aug 2011 22:13:45 +0000 (23:13 +0100)]
hw/pl061: Convert to VMState
Convert the PL061 to VMState. We choose to widen the struct members
to uint32_t rather than the other two options of breaking migration
compatibility or using vmstate hacks to read/write a 32 bit value
into an 8 bit struct field.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 22 Jul 2011 15:36:54 +0000 (15:36 +0000)]
vexpress, realview: Use pl111, not pl110
The Versatile Express, Realview EB, PBX A9 and PB A8 boards all
use a PL111 for their graphics, not a PL110. Now we model the
PL111, use it on these board models.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 22 Jul 2011 13:42:39 +0000 (13:42 +0000)]
versatilepb: Implement SYS_CLCD mux control register bits
On the Versatile PB, PL110 graphics adaptor only natively supports
5551 pixel format; an external mux swaps bits around to allow
RGB565 and BGR565, under the control of bits [1:0] in the SYS_CLCD
system register.
Implement these SYS_CLCD register bits, and use a gpio line to
feed them out of the system register model, across the versatilepb
board and into the pl110 so we can select the right format.
This is necessary as recent Linux versatile kernels default to
programming the CLCD and mux for 16 bit BGR rather than 16 bit RGB.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 22 Jul 2011 13:19:33 +0000 (13:19 +0000)]
hw/pl110: Model the PL111 CLCD controller
Model the PL111 CLCD controller. This is a minor variation
on the PL110; the major programmer visible differences are
support for hardware cursor (unimplemented) and two new
pixel formats.
Since syborg_fb.c borrows the pl11x pixel drawing routines,
we also update it to cope with the new slightly larger array
of function pointers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Sun, 14 Aug 2011 21:05:49 +0000 (14:05 -0700)]
scsi: do not overwrite memory on REQUEST SENSE commands with a large buffer
Other scsi_target_reqops commands were careful about not using r->cmd.xfer
directly, and instead always cap it to a fixed length. This was not done
for REQUEST SENSE, and this patch fixes it.
Reported-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Fri, 12 Aug 2011 16:49:36 +0000 (17:49 +0100)]
hw/scsi-bus.c: Fix use of uninitialised variable
Don't use req before it has been initialised in scsi_req_new().
This fixes a compile failure due to gcc complaining about this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Michael Roth [Wed, 10 Aug 2011 18:10:51 +0000 (13:10 -0500)]
qapi: fix build issue due to missing newline in generated header
Fixes a build issue on RHEL5, and potentially other distros, where gcc
will generate an error due to us not writing a trailing "\n" when
generating *qmp-commands.h
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 16:58:50 +0000 (19:58 +0300)]
memory: correct documentation typos
Noted by Drew Jones.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 16:58:49 +0000 (19:58 +0300)]
memory: add API for creating ROM/device regions
ROM/device regions act as mapped RAM for reads, can I/O memory for
writes. This allow emulation of flash devices.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 16:58:48 +0000 (19:58 +0300)]
memory: reclaim resources when a memory region is destroyed for good
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jiri Denemark [Wed, 10 Aug 2011 10:04:34 +0000 (12:04 +0200)]
build: Move QEMU_INCLUDES before QEMU_CFLAGS
This patch fixes build when any of the include paths from QEMU_CFLAGS
contains a header file with similar name to a header file in qemu
sources. I hit it with error.h included by qapi/qapi-types-core.h. GCC
decided to use /usr/include/alsa/error.h instead of qemu's error.h.
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Sat, 6 Aug 2011 20:47:22 +0000 (22:47 +0200)]
configure: Disable guest_agent for mingw32
guest_agent is not supported for mingw32, so the default value
should be 'no', not 'yes'.
This removes the dependencies to glib-2.0 and python which
makes native and cross builds for w32 much easier (no need
to get and install these extra packages).
It also avoids the problems caused by different bitfield alignment
which is required by glib-2.0.
It is still possible to set guest_agent=yes via configure option.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:19 +0000 (10:49 +0200)]
scsi: add special traces for common commands
Can be useful when debugging the device scan phase.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:18 +0000 (10:49 +0200)]
scsi: report unit attention on reset
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:17 +0000 (10:49 +0200)]
scsi: add support for unit attention conditions
Unit attention conditions override any sense data the device already
has. Their signaling and clearing is handled entirely by the SCSIBus
code, and they are completely transparent to the SCSIDevices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:16 +0000 (10:49 +0200)]
scsi: add a bunch more common sense codes
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:15 +0000 (10:49 +0200)]
scsi: move handling of REQUEST SENSE to common code
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:14 +0000 (10:49 +0200)]
scsi: move handling of REPORT LUNS and invalid LUNs to common code
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:13 +0000 (10:49 +0200)]
scsi: move request parsing to common code
Also introduce the first occurrence of "independent" SCSIReqOps,
to handle invalid commands in common code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:12 +0000 (10:49 +0200)]
scsi: push lun field to SCSIDevice
This will let SCSIBus detect requests sent to an invalid LUN, and
handle them itself. However, there will be still support for only one
LUN per target
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:11 +0000 (10:49 +0200)]
scsi: introduce SCSICommand
This struct is currently unnamed. Give it a name and use it
explicitly to decouple (some parts of) CDB parsing from
SCSIRequest.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:10 +0000 (10:49 +0200)]
scsi: pass cdb already to scsi_req_new
Right now the CDB is not passed to the SCSIBus until scsi_req_enqueue.
Passing it to scsi_req_new will let scsi_req_new dispatch common requests
through different reqops.
Moving the memcpy to scsi_req_new is a hack that will go away as
soon as scsi_req_new will also take care of the parsing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:09 +0000 (10:49 +0200)]
scsi: move request-related callbacks from SCSIDeviceInfo to SCSIReqOps
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:08 +0000 (10:49 +0200)]
scsi: introduce SCSIReqOps
This will let allow requests to be dispatched through different callbacks,
either common or per-device.
This patch adjusts the API, the next one will move members to SCSIReqOps.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:07 +0000 (10:49 +0200)]
scsi: move sense handling to generic code
With this patch, sense data is stored in the generic data structures
for SCSI devices and requests. The SCSI layer takes care of storing
sense data in the SCSIDevice for the subsequent REQUEST SENSE command.
At the same time, get_sense is removed and scsi_req_get_sense can use
an entirely generic implementation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:06 +0000 (10:49 +0200)]
scsi: pass status when completing
A small improvement in the SCSI request API. Pass the status
at the time the request is completed, so that we can assert that
no request is completed twice. This would have detected the
problem fixed in the previous patch.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:05 +0000 (10:49 +0200)]
vscsi: always use get_sense
vscsi supports autosensing by providing sense data directly in the
response. When get_sense was added, the older state machine approach
that sent REQUEST SENSE commands separately was left in place. Remove
it, all existing SCSIDevices do support autosensing and the next patches
will make the support come for free from the SCSIBus.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 3 Aug 2011 08:49:04 +0000 (10:49 +0200)]
scsi-disk: no need to call scsi_req_data on a short read
In fact, if the HBA's transfer_data callback goes on with scsi_req_continue
the request will be completed successfully instead of showing a failure.
It can even cause a segmentation fault.
An easy way to trigger it is "eject -f cd" during installation (during media
test if the installer does something like that).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 8 Aug 2011 19:31:37 +0000 (14:31 -0500)]
pc: make vgabios exit port more useful
We've always listened on port 501 for vgabios panic messages. In the entire
time I've worked on QEMU, I've never actually seen a vgabios panic message :-)
If we change the semantics of this port a little bit, it makes it possible to
use it for more interesting use-cases. I chose this approach instead of adding
a new I/O port because it avoids having a guest visible change.
This change allows single-byte access to port 501 and also uses the value
written to construct an exit code.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 12 Aug 2011 13:06:02 +0000 (08:06 -0500)]
Merge remote-tracking branch 'stefanha/trivial-patches' into staging
Anthony Liguori [Fri, 12 Aug 2011 12:52:53 +0000 (07:52 -0500)]
Merge remote-tracking branch 'aneesh/for-upstream-1' into staging
Anthony Liguori [Fri, 12 Aug 2011 12:51:09 +0000 (07:51 -0500)]
Merge remote-tracking branch 'spice/spice.v41' into staging
Anthony Liguori [Fri, 12 Aug 2011 12:50:35 +0000 (07:50 -0500)]
Merge remote-tracking branch 'kraxel/usb.23' into staging
Anthony Liguori [Fri, 12 Aug 2011 12:50:16 +0000 (07:50 -0500)]
Merge remote-tracking branch 'kraxel/seabios' into staging
Paolo Bonzini [Fri, 12 Aug 2011 11:18:14 +0000 (13:18 +0200)]
fix QLIST usage for RAM list
Spotted while reviewing the migration thread patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Peter Maydell [Wed, 3 Aug 2011 22:49:04 +0000 (23:49 +0100)]
hw/qdev: Don't crash if qdev_create(NULL, ...) fails
If an attempt to create a qdev device on the default sysbus (by passing
NULL as the bus to qdev_create) fails, print a useful error message
rather than crashing trying to dereference a NULL pointer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Zhi Yong Wu [Thu, 4 Aug 2011 07:40:35 +0000 (15:40 +0800)]
scsi-bus: use DO_UPCAST
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Edgar E. Iglesias [Thu, 11 Aug 2011 07:17:28 +0000 (09:17 +0200)]
etrax-ser: printf -> qemu_log.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Tue, 9 Aug 2011 11:24:04 +0000 (13:24 +0200)]
etrax: QDevify the Ethernet MAC.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Alon Levy [Wed, 10 Aug 2011 16:31:46 +0000 (19:31 +0300)]
ui/spice-core: report compiled-version in info spice/query-spice
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 10 Aug 2011 15:34:13 +0000 (17:34 +0200)]
seabios: update to master
commit
8e301472e324b6d6496d8b4ffc66863e99d7a505
user visible changes in seabios:
* ahci is enabled by default (and thus in this build).
* bootorder support for ahci.
* two-pass pci allocator (orders bars by size for better packing).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Alon Levy [Tue, 9 Aug 2011 20:53:34 +0000 (23:53 +0300)]
qxl: unbreak after memory API conversion
Break is only noticable with newer spice-server library (0.8.2 release
or 0.9.0 and newer on master branch).
ioport_write's val was changed from uint32_t to uint64_t, this
broke two printfs. Use PRId64 instead of %d.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Yonit Halperin [Tue, 9 Aug 2011 13:12:40 +0000 (16:12 +0300)]
qxl: allowing the command rings to be not empty when spice worker is stopped RHBZ #728984
same as
8927cfbba232e28304734f7afd463c1b84134031, but for qxl_check_state, that was
triggered by qxl_pre_load (which calls qxl_hard_reset, which calls qxl_soft_reset),
and caused the migration target to crash.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 10 Aug 2011 08:53:50 +0000 (10:53 +0200)]
usb-hid: remove usb_hid_datain_cb
No users left, all migrated over to hw/hid.[ch].
Yea! Zap it!
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Michael Walle [Tue, 9 Aug 2011 21:54:55 +0000 (23:54 +0200)]
milkymist-softusb: use hid code directly
Remove the dummy USB device and use the HID code directly. Use the HID code
for the mouse support, too.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Michael Walle [Tue, 9 Aug 2011 21:54:54 +0000 (23:54 +0200)]
usb-hid: use hid vmstate macro
Use new hid vmstate macro. Version stays the same, because there is no
reordering of the fields.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Michael Walle [Tue, 9 Aug 2011 21:54:53 +0000 (23:54 +0200)]
hid: introduce hid vmstate macros
Add VMSTATE macros to describe a HIDState. Based on usb-hid.c descriptions.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Michael Walle [Tue, 9 Aug 2011 21:54:52 +0000 (23:54 +0200)]
hid: register kbd hander in init()
Register the keyboard event handler in hid's init() instead of its reset()
function.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 9 Aug 2011 10:35:57 +0000 (12:35 +0200)]
usb/hid: add hid_pointer_activate, use it
HID reorganziation broke the usb tablet in windows xp. The reason is
that xp activates idle before it starts polling, which creates a
chicken-and-egg issue: We don't call hid_pointer_poll because there are
no pending events. We don't get any events because the activation code
in hid_pointer_poll is never executed and thus all pointer events are
routed to the PS/2 mouse by qemu.
Fix this by creating a hid_pointer_activate function and call it from
usb-hid when the guest sets the idle state.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Edgar E. Iglesias [Tue, 9 Aug 2011 17:16:43 +0000 (19:16 +0200)]
Merge remote-tracking branch 'pm-arm/for-upstream' into pm
Edgar E. Iglesias [Tue, 9 Aug 2011 10:13:26 +0000 (12:13 +0200)]
etrax: Allocate DMA connections at board level.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Tue, 9 Aug 2011 10:18:23 +0000 (12:18 +0200)]
etrax: Remove hw/etraxfs.c.
The Bare ETRAX FS board was a fictive machine that I used when
developing the CRIS system emulation. Since we support the
real AXIS-dev88 developer boards, there is no reason to
keep the fictive one around.
This commit also removes the double registration of the axis-dev88
board.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Avi Kivity [Tue, 9 Aug 2011 06:54:22 +0000 (09:54 +0300)]
lance: unbreak after memory API conversion
The conversion passed the wrong opaque pointer, causing a crash on first use.
Pass the correct opaque.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Anthony Liguori [Mon, 8 Aug 2011 19:38:42 +0000 (14:38 -0500)]
Merge remote-tracking branch 'qemu-kvm/uq/master' into staging
Aneesh Kumar K.V [Sat, 7 May 2011 10:31:33 +0000 (16:01 +0530)]
hw/9pfs: Update vfs_rename to use coroutines
I guess TRENAME 9p operation needs an update. The 9p op should
more similar renameat. Otherwise anything other than path cannot track
the fid.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Aneesh Kumar K.V [Sat, 7 May 2011 10:39:10 +0000 (16:09 +0530)]
hw/9pfs: Add yeild support to rename coroutine
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Venkateswararao Jujjuri [Mon, 8 Aug 2011 18:20:20 +0000 (23:50 +0530)]
hw/9pfs: Update v9fs_remove to use coroutines
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Venkateswararao Jujjuri [Mon, 8 Aug 2011 18:18:29 +0000 (23:48 +0530)]
hw/9pfs: Add yield support for remove
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Venkateswararao Jujjuri [Mon, 8 Aug 2011 18:16:14 +0000 (23:46 +0530)]
hw/9pfs: Update mkdir to use coroutines
Signed-off-by: Venkateswararao Jujjuri "<jvrao@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Venkateswararao Jujjuri [Mon, 8 Aug 2011 18:14:24 +0000 (23:44 +0530)]
hw/9pfs: Add yield support for mkdir coroutine
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Aneesh Kumar K.V [Wed, 18 May 2011 23:06:51 +0000 (16:06 -0700)]
hw/9pfs: Update v9fs_mknod to use coroutines
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Aneesh Kumar K.V [Wed, 18 May 2011 23:06:38 +0000 (16:06 -0700)]
hw/9pfs: Add yield support to mknod coroutine
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Aneesh Kumar K.V [Wed, 18 May 2011 23:06:26 +0000 (16:06 -0700)]
hw/9pfs: Update v9fs_xattrcreate to use coroutines
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Aneesh Kumar K.V [Wed, 18 May 2011 23:05:48 +0000 (16:05 -0700)]
hw/9pfs: Update v9fs_xattrwalk to coroutines
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Aneesh Kumar K.V [Wed, 18 May 2011 23:05:34 +0000 (16:05 -0700)]
hw/9pfs: Add yield support to xattr related coroutine
This include llistxattr and lgetxattr.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Aneesh Kumar K.V [Wed, 18 May 2011 23:05:10 +0000 (16:05 -0700)]
hw/9pfs: Update v9fs_setattr to use coroutines
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Aneesh Kumar K.V [Wed, 18 May 2011 23:04:58 +0000 (16:04 -0700)]
hw/9pfs: Add yield support to setattr related coroutines
This include chmod, utimensat, chown and truncate.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Aneesh Kumar K.V [Wed, 18 May 2011 23:04:33 +0000 (16:04 -0700)]
hw/9pfs: Update v9fs_getattr to use coroutines
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Aneesh Kumar K.V [Wed, 18 May 2011 23:04:13 +0000 (16:04 -0700)]
hw/9pfs: Add yield support to lstat coroutine
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Aneesh Kumar K.V [Wed, 18 May 2011 23:04:01 +0000 (16:04 -0700)]
hw/9pfs: Update v9fs_statfs to use coroutines
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Aneesh Kumar K.V [Wed, 18 May 2011 23:03:49 +0000 (16:03 -0700)]
hw/9pfs: Add yield support to statfs coroutine
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Aneesh Kumar K.V [Wed, 18 May 2011 22:57:17 +0000 (15:57 -0700)]
hw/9pfs: Update v9fs_readdir to use coroutines
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Aneesh Kumar K.V [Wed, 18 May 2011 22:42:42 +0000 (15:42 -0700)]
hw/9pfs: Add yield support for readdir related coroutines
This include readdir, telldir, seekdir, rewinddir.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Venkateswararao Jujjuri [Mon, 8 Aug 2011 18:06:41 +0000 (23:36 +0530)]
hw/9pfs: Update v9fs_readlink to use coroutine
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Venkateswararao Jujjuri (JV) [Mon, 8 Aug 2011 18:03:48 +0000 (23:33 +0530)]
hw/9pfs: Add yeild support for readlink
Signed-off-by: Venkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:32 +0000 (16:09 +0300)]
pci: remove support for pre memory API BARs
Not used anymore.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:31 +0000 (16:09 +0300)]
pci: rename pci_register_bar_region() to pci_register_bar()
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:30 +0000 (16:09 +0300)]
pci: fold BAR mapping function into its caller
There is only one function, so no need for a function pointer.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:29 +0000 (16:09 +0300)]
pci: remove pci_register_bar()
Superceded by pci_register_bar_region(). The implementations
are folded together.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:28 +0000 (16:09 +0300)]
pci: convert pci rom to memory API
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:27 +0000 (16:09 +0300)]
pci: remove pci_register_bar_simple()
Superceded by pci_register_bar_region().
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:26 +0000 (16:09 +0300)]
msix: convert to memory API
The msix table is defined as a subregion, to allow for a BAR that
mixes device specific regions with the msix table.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:25 +0000 (16:09 +0300)]
xen-platform: convert to memory API
Since this device bypasses PCI and registers I/O ports directly with
the system bus, it needs further attention.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:24 +0000 (16:09 +0300)]
uhci: convert to memory API
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:23 +0000 (16:09 +0300)]
ehci: convert to memory API
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:22 +0000 (16:09 +0300)]
sun4u: convert to memory API
fixes memory leak on repeated BAR map/unmap
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:21 +0000 (16:09 +0300)]
isa-mmio: convert to memory API
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:20 +0000 (16:09 +0300)]
i6300esb: convert to memory API
Also add missing destructor.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:19 +0000 (16:09 +0300)]
pcnet: convert to memory API
Also related chips.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:18 +0000 (16:09 +0300)]
ne2000: convert to memory API
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:17 +0000 (16:09 +0300)]
ppc: convert to memory API
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:16 +0000 (16:09 +0300)]
lsi53c895a: convert to memory API
An optimization that fast-pathed DMA reads from the SCRIPTS memory
was removed int the process. Likely it breaks with iommus anyway.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:15 +0000 (16:09 +0300)]
intel-hda: convert to memory API
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:14 +0000 (16:09 +0300)]
ahci: convert to memory API
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:13 +0000 (16:09 +0300)]
virtio-pci: convert to memory API
except msix.
[jan: fix build]
[aliguori: fix build]
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:12 +0000 (16:09 +0300)]
ivshmem: convert to memory API
excluding msix.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:11 +0000 (16:09 +0300)]
ide: convert to memory API
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:10 +0000 (16:09 +0300)]
es1370: convert to memory API
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 8 Aug 2011 13:09:09 +0000 (16:09 +0300)]
eepro100: convert to memory API
Note: the existing code aliases the flash BAR into the MMIO bar. This is
probably a bug. This patch does not correct the problem.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
projects / sdk / emulator / qemu.git / log