leds: trigger: ledtrig-cpu:: Fix 'output may be truncated' issue for 'cpu'

[ Upstream commit ff50f53276131a3059e8307d11293af388ed2bcd ]

In order to teach the compiler that 'trig->name' will never be truncated,
we need to tell it that 'cpu' is not negative.

When building with W=1, this fixes the following warnings:

  drivers/leds/trigger/ledtrig-cpu.c: In function ‘ledtrig_cpu_init’:
  drivers/leds/trigger/ledtrig-cpu.c:155:56: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 5 [-Werror=format-truncation=]
    155 |                 snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
        |                                                        ^~
  drivers/leds/trigger/ledtrig-cpu.c:155:52: note: directive argument in the range [-2147483648, 7]
    155 |                 snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
        |                                                    ^~~~~~~
  drivers/leds/trigger/ledtrig-cpu.c:155:17: note: ‘snprintf’ output between 5 and 15 bytes into a destination of size 8
    155 |                 snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
        |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 8f88731d052d ("led-triggers: create a trigger for CPU activity")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/3f4be7a99933cf8566e630da54f6ab913caac432.1695453322.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: pwm: Don't disable the PWM when the LED should be off

[ Upstream commit 76fe464c8e64e71b2e4af11edeef0e5d85eeb6aa ]

Disabling a PWM (i.e. calling pwm_apply_state with .enabled = false)
gives no guarantees what the PWM output does. It might freeze where it
currently is, or go in a High-Z state or drive the active or inactive
state, it might even continue to toggle.

To ensure that the LED gets really disabled, don't disable the PWM even
when .duty_cycle is zero.

This fixes disabling a leds-pwm LED on i.MX28. The PWM on this SoC is
one of those that freezes its output on disable, so if you disable an
LED that is full on, it stays on. If you disable a LED with half
brightness it goes off in 50% of the cases and full on in the other 50%.

Fixes: 41c42ff5dbe2 ("leds: simple driver for pwm driven LEDs")
Reported-by: Rogan Dawes <rogan@dawes.za.net>
Reported-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20230922192834.1695727-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: turris-omnia: Do not use SMBUS calls

[ Upstream commit 6de283b96b31b4890e3ee8c86caca2a3a30d1011 ]

The leds-turris-omnia driver uses three function for I2C access:
- i2c_smbus_write_byte_data() and i2c_smbus_read_byte_data(), which
  cause an emulated SMBUS transfer,
- i2c_master_send(), which causes an ordinary I2C transfer.

The Turris Omnia MCU LED controller is not semantically SMBUS, it
operates as a simple I2C bus. It does not implement any of the SMBUS
specific features, like PEC, or procedure calls, or anything. Moreover
the I2C controller driver also does not implement SMBUS, and so the
emulated SMBUS procedure from drivers/i2c/i2c-core-smbus.c is used for
the SMBUS calls, which gives an unnecessary overhead.

When I first wrote the driver, I was unaware of these facts, and I
simply used the first function that worked.

Drop the I2C SMBUS calls and instead use simple I2C transfers.

Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230918161104.20860-2-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: arizona-spi: Set pdata.hpdet_channel for ACPI enumerated devs

[ Upstream commit 831d1af85133e1763d41e20414912d9a1058ea72 ]

Commit 9e86b2ad4c11 changed the channel used for HPDET detection
(headphones vs lineout detection) from being hardcoded to
ARIZONA_ACCDET_MODE_HPL (HP left channel) to it being configurable
through arizona_pdata.hpdet_channel the DT/OF parsing added for
filling arizona_pdata on devicetree platforms ensures that
arizona_pdata.hpdet_channel gets set to ARIZONA_ACCDET_MODE_HPL
when not specified in the devicetree-node.

But on ACPI platforms where arizona_pdata is filled by
arizona_spi_acpi_probe() arizona_pdata.hpdet_channel was not
getting set, causing it to default to 0 aka ARIZONA_ACCDET_MODE_MIC.

This causes headphones to get misdetected as line-out on some models.
Fix this by setting hpdet_channel = ARIZONA_ACCDET_MODE_HPL.

Fixes: e933836744a2 ("mfd: arizona: Add support for ACPI enumeration of WM5102 connected over SPI")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231014205414.59415-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: mfd: mt6397: Split out compatible for MediaTek MT6366 PMIC

[ Upstream commit 61fdd1f1d2c183ec256527d16d75e75c3582af82 ]

The MT6366 PMIC is mostly, but not fully, compatible with MT6358. It has
a different set of regulators. Specifically, it lacks the camera related
VCAM* LDOs and VLDO28, but has additional VM18, VMDDR, and VSRAM_CORE LDOs.

The PMICs contain a chip ID register that can be used to detect which
exact model is preset, so it is possible to share a common base
compatible string.

Add a separate compatible for the MT6366 PMIC, with a fallback to the
MT6358 PMIC.

Fixes: 49be16305587 ("dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-2-wenst@chromium.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: dln2: Fix double put in dln2_probe

[ Upstream commit 759c409bc5fc496cbc22cd0b392d3cbb0c0e23eb ]

The dln2_free() already contains usb_put_dev(). Therefore,
the redundant usb_put_dev() before dln2_free() may lead to
a double free.

Fixes: 96da8f148396 ("mfd: dln2: Fix memory leak in dln2_probe()")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20230925024134.9683-1-dinghao.liu@zju.edu.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: core: Ensure disabled devices are skipped without aborting

[ Upstream commit 7ba7bdef4d14e3722e2842da3b48cbadb73e52d6 ]

The loop searching for a matching device based on its compatible
string is aborted when a matching disabled device is found.
This abort prevents to add devices as soon as one disabled device
is found.

Continue searching for an other device instead of aborting on the
first disabled one fixes the issue.

Fixes: 22380b65dc70 ("mfd: mfd-core: Ensure disabled devices are ignored without error")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/528425d6472176bb1d02d79596b51f8c28a551cc.1692376361.git.christophe.leroy@csgroup.eu
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: core: Un-constify mfd_cell.of_reg

[ Upstream commit 3c70342f1f0045dc827bb2f02d814ce31e0e0d05 ]

Enable dynamically filling in the whole mfd_cell structure. All other
fields already allow that.

Fixes: 466a62d7642f ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/b73fe4bc4bd6ba1af90940a640ed65fe254c0408.1693253717.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx5: Fix init stage error handling to avoid double free of same QP and UAF

[ Upstream commit 2ef422f063b74adcc4a4a9004b0a87bb55e0a836 ]

In the unlikely event that workqueue allocation fails and returns NULL in
mlx5_mkey_cache_init(), delete the call to
mlx5r_umr_resource_cleanup() (which frees the QP) in
mlx5_ib_stage_post_ib_reg_umr_init().  This will avoid attempted double
free of the same QP when __mlx5_ib_add() does its cleanup.

Resolves a splat:

   Syzkaller reported a UAF in ib_destroy_qp_user

   workqueue: Failed to create a rescuer kthread for wq "mkey_cache": -EINTR
   infiniband mlx5_0: mlx5_mkey_cache_init:981:(pid 1642):
   failed to create work queue
   infiniband mlx5_0: mlx5_ib_stage_post_ib_reg_umr_init:4075:(pid 1642):
   mr cache init failed -12
   ==================================================================
   BUG: KASAN: slab-use-after-free in ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2073)
   Read of size 8 at addr ffff88810da310a8 by task repro_upstream/1642

   Call Trace:
   <TASK>
   kasan_report (mm/kasan/report.c:590)
   ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2073)
   mlx5r_umr_resource_cleanup (drivers/infiniband/hw/mlx5/umr.c:198)
   __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4178)
   mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402)
   ...
   </TASK>

   Allocated by task 1642:
   __kmalloc (./include/linux/kasan.h:198 mm/slab_common.c:1026
   mm/slab_common.c:1039)
   create_qp (./include/linux/slab.h:603 ./include/linux/slab.h:720
   ./include/rdma/ib_verbs.h:2795 drivers/infiniband/core/verbs.c:1209)
   ib_create_qp_kernel (drivers/infiniband/core/verbs.c:1347)
   mlx5r_umr_resource_init (drivers/infiniband/hw/mlx5/umr.c:164)
   mlx5_ib_stage_post_ib_reg_umr_init (drivers/infiniband/hw/mlx5/main.c:4070)
   __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4168)
   mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402)
   ...

   Freed by task 1642:
   __kmem_cache_free (mm/slub.c:1826 mm/slub.c:3809 mm/slub.c:3822)
   ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2112)
   mlx5r_umr_resource_cleanup (drivers/infiniband/hw/mlx5/umr.c:198)
   mlx5_ib_stage_post_ib_reg_umr_init (drivers/infiniband/hw/mlx5/main.c:4076
   drivers/infiniband/hw/mlx5/main.c:4065)
   __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4168)
   mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402)
   ...

Fixes: 04876c12c19e ("RDMA/mlx5: Move init and cleanup of UMR to umr.c")
Link: https://lore.kernel.org/r/1698170518-4006-1-git-send-email-george.kennedy@oracle.com
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

erofs: fix erofs_insert_workgroup() lockref usage

[ Upstream commit 1a0ac8bd7a4fa5b2f4ef14c3b1e9d6e5a5faae06 ]

As Linus pointed out [1], lockref_put_return() is fundamentally
designed to be something that can fail.  It behaves as a fastpath-only
thing, and the failure case needs to be handled anyway.

Actually, since the new pcluster was just allocated without being
populated, it won't be accessed by others until it is inserted into
XArray, so lockref helpers are actually unneeded here.

Let's just set the proper reference count on initializing.

[1] https://lore.kernel.org/r/CAHk-=whCga8BeQnJ3ZBh_Hfm9ctba_wpF444LpwRybVNMzO6Dw@mail.gmail.com

Fixes: 7674a42f35ea ("erofs: use struct lockref to replace handcrafted approach")
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20231031060524.1103921-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: ams-delta.c: use component after check

[ Upstream commit bd0f7498bc9084d8cccc5484cd004b40f314b763 ]

static void cx81801_close()
{
...
(A) struct snd_soc_dapm_context *dapm = &component->card->dapm;
...
(B) if (!component)
return;
}

(A) uses component before NULL check (B). This patch moves it after (B).

Fixes: d0fdfe34080c ("ASoC: cx20442: replace codec to component")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/3e608474-e99a-4866-ae98-3054a4221f09@moroto.mountain
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ttqdq623.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix deadlock in backlog processing

[ Upstream commit 203b01001c4d741205b9c329acddc5193ed56fbd ]

If a request has the flag CRYPTO_TFM_REQ_MAY_BACKLOG set, the function
qat_alg_send_message_maybacklog(), enqueues it in a backlog list if
either (1) there is already at least one request in the backlog list, or
(2) the HW ring is nearly full or (3) the enqueue to the HW ring fails.
If an interrupt occurs right before the lock in qat_alg_backlog_req() is
taken and the backlog queue is being emptied, then there is no request
in the HW queues that can trigger a subsequent interrupt that can clear
the backlog queue. In addition subsequent requests are enqueued to the
backlog list and not sent to the hardware.

Fix it by holding the lock while taking the decision if the request
needs to be included in the backlog queue or not. This synchronizes the
flow with the interrupt handler that drains the backlog queue.

For performance reasons, the logic has been changed to try to enqueue
first without holding the lock.

Fixes: 386823839732 ("crypto: qat - add backlog mechanism")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/af9581e2-58f9-cc19-428f-6f18f1f83d54@redhat.com/T/
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix ring to service map for QAT GEN4

[ Upstream commit a238487f7965d102794ed9f8aff0b667cd2ae886 ]

The 4xxx drivers hardcode the ring to service mapping. However, when
additional configurations where added to the driver, the mappings were
not updated. This implies that an incorrect mapping might be reported
through pfvf for certain configurations.

Add an algorithm that computes the correct ring to service mapping based
on the firmware loaded on the device.

Fixes: 0cec19c761e5 ("crypto: qat - add support for compression for 4xxx")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - use masks for AE groups

[ Upstream commit f7df2329eec1729a606bba8ed1566a1b3c248bad ]

The adf_fw_config structures hardcode a bit mask that represents the
acceleration engines (AEs) where a certain firmware image will have to
be loaded to. Remove the hardcoded masks and replace them with defines.

This does not introduce any functional change.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: a238487f7965 ("crypto: qat - fix ring to service map for QAT GEN4")
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - refactor fw config related functions

[ Upstream commit 2990d2edac6061c6f0f646a46e40957244be2268 ]

The logic that selects the correct adf_fw_config structure based on the
configured service is replicated twice in the uof_get_name() and
uof_get_ae_mask() functions. Refactor the code so that there is no
replication.

This does not introduce any functional change.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: a238487f7965 ("crypto: qat - fix ring to service map for QAT GEN4")
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - enable dc chaining service

[ Upstream commit 37b14f2dfa791fd485dbc536f8d1ffe8c6990290 ]

QAT GEN4 devices support chained compression operations. These
allow, with a single request to firmware, to hash then compress
data.

Extend the configuration to enable such mode. The cfg_services
operations in sysfs are extended to allow the string "dcc". When
selected, the driver downloads to the device both the symmetric
crypto and the compression firmware images and sends an admin message
to firmware which enables `chained` operations.
In addition, it sets the device's capabilities as the combination
of compression and symmetric crypto capabilities, while excluding
the ICP_ACCEL_CAPABILITIES_CRYPTO_SYMMETRIC bit to indicate
that in this mode, symmetric crypto instances are not supported.

When "dcc" is enabled, the device will handle compression requests
as if the "dc" configuration is loaded ("dcc" is a variation of "dc")
and the driver will register the acomp algorithms.

As for the other extended configurations, "dcc" is only available for
qat_4xxx devices and the chaining service will be only accessible from
user space.

Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: a238487f7965 ("crypto: qat - fix ring to service map for QAT GEN4")
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - consolidate services structure

[ Upstream commit 71713766380712c8ab2d604605e7b0b20f977801 ]

The data structure that associates a service id with its name is
replicated across the driver.
Remove duplication by moving this data structure to a new include file,
adf_cfg_services.h in order to have consistency across the drivers.

Note that the data structure is re-instantiated every time the new
include is added to a compilation unit.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: a238487f7965 ("crypto: qat - fix ring to service map for QAT GEN4")
Signed-off-by: Sasha Levin <sashal@kernel.org>

certs: Break circular dependency when selftest is modular

[ Upstream commit 04a93202ed7c3b451bf22d3ff4bcd379df27f299 ]

The modular build fails because the self-test code depends on pkcs7
which in turn depends on x509 which contains the self-test.

Split the self-test out into its own module to break the cycle.

Fixes: 3cde3174eb91 ("certs: Add FIPS selftests")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

padata: Fix refcnt handling in padata_free_shell()

[ Upstream commit 7ddc21e317b360c3444de3023bcc83b85fabae2f ]

In a high-load arm64 environment, the pcrypt_aead01 test in LTP can lead
to system UAF (Use-After-Free) issues. Due to the lengthy analysis of
the pcrypt_aead01 function call, I'll describe the problem scenario
using a simplified model:

Suppose there's a user of padata named `user_function` that adheres to
the padata requirement of calling `padata_free_shell` after `serial()`
has been invoked, as demonstrated in the following code:

```c
struct request {
    struct padata_priv padata;
    struct completion *done;
};

void parallel(struct padata_priv *padata) {
    do_something();
}

void serial(struct padata_priv *padata) {
    struct request *request = container_of(padata,
     struct request,
padata);
    complete(request->done);
}

void user_function() {
    DECLARE_COMPLETION(done)
    padata->parallel = parallel;
    padata->serial = serial;
    padata_do_parallel();
    wait_for_completion(&done);
    padata_free_shell();
}
```

In the corresponding padata.c file, there's the following code:

```c
static void padata_serial_worker(struct work_struct *serial_work) {
    ...
    cnt = 0;

    while (!list_empty(&local_list)) {
        ...
        padata->serial(padata);
        cnt++;
    }

    local_bh_enable();

    if (refcount_sub_and_test(cnt, &pd->refcnt))
        padata_free_pd(pd);
}
```

Because of the high system load and the accumulation of unexecuted
softirq at this moment, `local_bh_enable()` in padata takes longer
to execute than usual. Subsequently, when accessing `pd->refcnt`,
`pd` has already been released by `padata_free_shell()`, resulting
in a UAF issue with `pd->refcnt`.

The fix is straightforward: add `refcount_dec_and_test` before calling
`padata_free_pd` in `padata_free_shell`.

Fixes: 07928d9bfc81 ("padata: Remove broken queue flushing")
Signed-off-by: WangJinchao <wangjinchao@xfusion.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: endpoint: Fix double free in __pci_epc_create()

[ Upstream commit c9501d268944d6c0475ecb3e740a084a7da9cbfe ]

The pci_epc_release() function frees "epc" so the kfree() on the next line
is a double free.  Drop the redundant free.

Fixes: 7711cbb4862a ("PCI: endpoint: Fix WARN() when an endpoint driver is removed")
Link: https://lore.kernel.org/r/2ce68694-87a7-4c06-b8a4-9870c891b580@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: Skylake: Fix mem leak when parsing UUIDs fails

[ Upstream commit 168d97844a61db302dec76d44406e9d4d7106b8e ]

Error path in snd_skl_parse_uuids() shall free last allocated module if
its instance_id allocation fails.

Fixes: f8e066521192 ("ASoC: Intel: Skylake: Fix uuid_module memory leak in failure case")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231026082558.1864910-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-hidpp: Move get_wireless_feature_index() check to hidpp_connect_event()

[ Upstream commit ba9de350509504fb748837b71e23d7e84c83d93c ]

Calling get_wireless_feature_index() from probe() causes
the wireless_feature_index to only get set for unifying devices which
are already connected at probe() time. It does not get set for devices
which connect later.

Fix this by moving get_wireless_feature_index() to hidpp_connect_event(),
this does not make a difference for devices connected at probe() since
probe() will queue the hidpp_connect_event() for those at probe time.

This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)

And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)

Fixes: 0da0a63b7cba ("HID: logitech-hidpp: Support WirelessDeviceStatus connect events")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-4-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-hidpp: Revert "Don't restart communication if not necessary"

[ Upstream commit 55bf70362ffc4ddd7c8745e2fe880edac00e4aff ]

Commit 91cf9a98ae41 ("HID: logitech-hidpp: make .probe usbhid capable")
makes hidpp_probe() first call hid_hw_start(hdev, 0) to allow IO
without connecting any hid subdrivers (hid-input, hidraw).

This is done to allow to retrieve the device's name and serial number
and store these in hdev->name and hdev->uniq.

Then later on IO was stopped and started again with hid_hw_start(hdev,
HID_CONNECT_DEFAULT) connecting hid-input and hidraw after the name
and serial number have been setup.

Commit 498ba2069035 ("HID: logitech-hidpp: Don't restart communication
if not necessary") changed the probe() code to only do the start with
a 0 connect-mask + restart later for unifying devices.

But for non unifying devices hdev->name and hdev->uniq are updated too.
So this change re-introduces the problem for which the start with
a 0 connect-mask + restart later behavior was introduced.

The previous patch in this series changes the unifying path to instead of
restarting IO only call hid_connect() later. This avoids possible issues
with restarting IO seen on non unifying devices.

Revert the change to limit the restart behavior to unifying devices to
fix hdev->name changing after userspace facing devices have already been
registered.

This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)

And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)

Fixes: 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if not necessary")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-3-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-hidpp: Don't restart IO, instead defer hid_connect() only

[ Upstream commit 11ca0322a41920df2b462d2e45b0731e47ff475b ]

Restarting IO causes 2 problems:

1. Some devices do not like IO being restarted this was addressed in
   commit 498ba2069035 ("HID: logitech-hidpp: Don't restart communication
   if not necessary"), but that change has issues of its own and needs to
   be reverted.

2. Restarting IO and specifically calling hid_device_io_stop() causes
   received packets to be missed, which may cause connect-events to
   get missed.

Restarting IO was introduced in commit 91cf9a98ae41 ("HID: logitech-hidpp:
make .probe usbhid capable") to allow to retrieve the device's name and
serial number and store these in hdev->name and hdev->uniq before
connecting any hid subdrivers (hid-input, hidraw) exporting this info
to userspace.

But this does not require restarting IO, this merely requires deferring
calling hid_connect(). Calling hid_hw_start() with a connect-mask of
0 makes it skip calling hid_connect(), so hidpp_probe() can simply call
hid_connect() later without needing to restart IO.

Remove the stop + restart of IO and instead just call hid_connect() later
to avoid the issues caused by restarting IO.

Now that IO is no longer stopped, hid_hw_close() must be called at the end
of probe() to balance the hid_hw_open() done at the beginning probe().

This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)

And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)

Fixes: 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if not necessary")
Suggested-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-2-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: bios: Revive earlyprintk support

[ Upstream commit 553f7ac78fbb41b2c93ab9b9d78e42274d27daa9 ]

The SuperH BIOS earlyprintk code is protected by CONFIG_EARLY_PRINTK.
However, when this protection was added, it was missed that SuperH no
longer defines an EARLY_PRINTK config symbol since commit
e76fe57447e88916 ("sh: Remove old early serial console code V2"), so
BIOS earlyprintk can no longer be used.

Fix this by reviving the EARLY_PRINTK config symbol.

Fixes: d0380e6c3c0f6edb ("early_printk: consolidate random copies of identical code")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/c40972dfec3dcc6719808d5df388857360262878.1697708489.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: uclogic: Fix a work->entry not empty bug in __queue_work()

[ Upstream commit d45f72b3c275101a620dd69881343e0dda72f877 ]

When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch
kernel and then the below work->entry not empty bug occurs.

In hid_test_uclogic_exec_event_hook_test(), the filter->work is not
initialized to be added to p.event_hooks->list, and then the
schedule_work() in uclogic_exec_event_hook() will call __queue_work(),
which check whether the work->entry is empty and cause the below
warning call trace.

So call INIT_WORK() with a fake work to solve the issue. After applying
this patch, the below work->entry not empty bug never occurs.

 WARNING: CPU: 0 PID: 2177 at kernel/workqueue.c:1787 __queue_work.part.0+0x780/0xad0
 Modules linked in:
 CPU: 0 PID: 2177 Comm: kunit_try_catch Tainted: G    B   W        N 6.6.0-rc2+ #30
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
 RIP: 0010:__queue_work.part.0+0x780/0xad0
 Code: 44 24 20 0f b6 00 84 c0 74 08 3c 03 0f 8e 52 03 00 00 f6 83 00 01 00 00 02 74 6f 4c 89 ef e8 c7 d8 f1 02 f3 90 e9 e5 f8 ff ff <0f> 0b e9 63 fc ff ff 89 e9 49 8d 57 68 4c 89 e6 4c 89 ff 83 c9 02
 RSP: 0000:ffff888102bb7ce8 EFLAGS: 00010086
 RAX: 0000000000000000 RBX: ffff888106b8e460 RCX: ffffffff84141cc7
 RDX: 1ffff11020d71c8c RSI: 0000000000000004 RDI: ffff8881001d0118
 RBP: dffffc0000000000 R08: 0000000000000001 R09: ffffed1020576f92
 R10: 0000000000000003 R11: ffff888102bb7980 R12: ffff888106b8e458
 R13: ffff888119c38800 R14: 0000000000000000 R15: ffff8881001d0100
 FS:  0000000000000000(0000) GS:ffff888119c00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffff888119506000 CR3: 0000000005286001 CR4: 0000000000770ef0
 DR0: ffffffff8fdd6ce0 DR1: ffffffff8fdd6ce1 DR2: ffffffff8fdd6ce3
 DR3: ffffffff8fdd6ce5 DR6: 00000000fffe0ff0 DR7: 0000000000000600
 PKRU: 55555554
 Call Trace:
  <TASK>
  ? __warn+0xc9/0x260
  ? __queue_work.part.0+0x780/0xad0
  ? report_bug+0x345/0x400
  ? handle_bug+0x3c/0x70
  ? exc_invalid_op+0x14/0x40
  ? asm_exc_invalid_op+0x16/0x20
  ? _raw_spin_lock+0x87/0xe0
  ? __queue_work.part.0+0x780/0xad0
  ? __queue_work.part.0+0x249/0xad0
  queue_work_on+0x48/0x50
  uclogic_exec_event_hook.isra.0+0xf7/0x160
  hid_test_uclogic_exec_event_hook_test+0x2f1/0x5d0
  ? try_to_wake_up+0x151/0x13e0
  ? uclogic_exec_event_hook.isra.0+0x160/0x160
  ? _raw_spin_lock_irqsave+0x8d/0xe0
  ? __sched_text_end+0xa/0xa
  ? __sched_text_end+0xa/0xa
  ? migrate_enable+0x260/0x260
  ? kunit_try_run_case_cleanup+0xe0/0xe0
  kunit_generic_run_threadfn_adapter+0x4a/0x90
  ? kunit_try_catch_throw+0x80/0x80
  kthread+0x2b5/0x380
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x2d/0x70
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork_asm+0x11/0x20
  </TASK>

Fixes: a251d6576d2a ("HID: uclogic: Handle wireless device reconnection")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20231009064245.3573397-3-ruanjinjie@huawei.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: uclogic: Fix user-memory-access bug in uclogic_params_ugee_v2_init_event_hooks()

[ Upstream commit 91cfe0bbaa1c434d4271eb6e1d7aaa1fe8d121f6 ]

When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and
then the below user-memory-access bug occurs.

In hid_test_uclogic_params_cleanup_event_hooks(),it call
uclogic_params_ugee_v2_init_event_hooks() with the first arg=NULL, so
when it calls uclogic_params_ugee_v2_has_battery(), the hid_get_drvdata()
will access hdev->dev with hdev=NULL, which will cause below
user-memory-access.

So add a fake_device with quirks member and call hid_set_drvdata()
to assign hdev->dev->driver_data which avoids the null-ptr-def bug
for drvdata->quirks in uclogic_params_ugee_v2_has_battery(). After applying
this patch, the below user-memory-access bug never occurs.

 general protection fault, probably for non-canonical address 0xdffffc0000000329: 0000 [#1] PREEMPT SMP KASAN
 KASAN: probably user-memory-access in range [0x0000000000001948-0x000000000000194f]
 CPU: 5 PID: 2189 Comm: kunit_try_catch Tainted: G    B   W        N 6.6.0-rc2+ #30
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
 RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600
 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00
 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202
 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000
 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948
 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0
 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92
 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080
 FS:  0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0
 DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6
 DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600
 PKRU: 55555554
 Call Trace:
  <TASK>
  ? die_addr+0x3d/0xa0
  ? exc_general_protection+0x144/0x220
  ? asm_exc_general_protection+0x22/0x30
  ? uclogic_params_ugee_v2_init_event_hooks+0x87/0x600
  ? sched_clock_cpu+0x69/0x550
  ? uclogic_parse_ugee_v2_desc_gen_params+0x70/0x70
  ? load_balance+0x2950/0x2950
  ? rcu_trc_cmpxchg_need_qs+0x67/0xa0
  hid_test_uclogic_params_cleanup_event_hooks+0x9e/0x1a0
  ? uclogic_params_ugee_v2_init_event_hooks+0x600/0x600
  ? __switch_to+0x5cf/0xe60
  ? migrate_enable+0x260/0x260
  ? __kthread_parkme+0x83/0x150
  ? kunit_try_run_case_cleanup+0xe0/0xe0
  kunit_generic_run_threadfn_adapter+0x4a/0x90
  ? kunit_try_catch_throw+0x80/0x80
  kthread+0x2b5/0x380
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x2d/0x70
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork_asm+0x11/0x20
  </TASK>
 Modules linked in:
 Dumping ftrace buffer:
    (ftrace buffer empty)
 ---[ end trace 0000000000000000 ]---
 RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600
 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00
 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202
 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000
 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948
 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0
 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92
 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080
 FS:  0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0
 DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6
 DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600
 PKRU: 55555554
 Kernel panic - not syncing: Fatal exception
 Dumping ftrace buffer:
    (ftrace buffer empty)
 Kernel Offset: disabled
 Rebooting in 1 seconds..

Fixes: a251d6576d2a ("HID: uclogic: Handle wireless device reconnection")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20231009064245.3573397-2-ruanjinjie@huawei.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hid: cp2112: Fix IRQ shutdown stopping polling for all IRQs on chip

[ Upstream commit dc3115e6c5d9863ec1a9ff1acf004ede93c34361 ]

Previously cp2112_gpio_irq_shutdown() always cancelled the
gpio_poll_worker, even if other IRQs were still active, and did not set
the gpio_poll flag to false. This resulted in any call to _shutdown()
resulting in interrupts no longer functioning on the chip until a
_remove() occurred (a.e. the cp2112 is unplugged or system rebooted).

Only cancel polling if all IRQs are disabled/masked, and correctly set
the gpio_poll flag, allowing polling to restart when an interrupt is
next enabled.

Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Fixes: 13de9cca514e ("HID: cp2112: add IRQ chip handling")
Link: https://lore.kernel.org/r/20231011182317.1053344-1-danny.kaehn@plexus.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hfi1: Workaround truncation compilation error

[ Upstream commit d4b2d165714c0ce8777d5131f6e0aad617b7adc4 ]

Increase name array to be large enough to overcome the following
compilation error.

drivers/infiniband/hw/hfi1/efivar.c: In function ‘read_hfi1_efi_var’:
drivers/infiniband/hw/hfi1/efivar.c:124:44: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
  124 |         snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |                                            ^
drivers/infiniband/hw/hfi1/efivar.c:124:9: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
  124 |         snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/hfi1/efivar.c:133:52: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
  133 |                 snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |                                                    ^
drivers/infiniband/hw/hfi1/efivar.c:133:17: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
  133 |                 snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:243: drivers/infiniband/hw/hfi1/efivar.o] Error 1

Fixes: c03c08d50b3d ("IB/hfi1: Check upper-case EFI variables")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/238fa39a8fd60e87a5ad7e1ca6584fcdf32e9519.1698159993.git.leonro@nvidia.com
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Leave space for '\0' in utf8 desc string

[ Upstream commit a75a16c62a2540f11eeae4f2b50e95deefb652ea ]

utf16s_to_utf8s does not NULL terminate the output string. For us to be
able to add a NULL character when utf16s_to_utf8s returns, we need to make
sure that there is space for such NULL character at the end of the output
buffer. We can achieve this by passing an output buffer size to
utf16s_to_utf8s that is one character less than what we allocated.

Other call sites of utf16s_to_utf8s appear to be using the same technique
where they artificially reduce the buffer size by one to leave space for a
NULL character or line feed character.

Fixes: 4b828fe156a6 ("scsi: ufs: revamp string descriptor reading")
Reviewed-by: Mars Cheng <marscheng@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Yen-lin Lai <yenlinlai@google.com>
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://lore.kernel.org/r/20231017182026.2141163-1-danielmentz@google.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl: Fix PM disable depth imbalance in fsl_easrc_probe

[ Upstream commit 9e630efb5a4af56fdb15aa10405f5cfd3f5f5b83 ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by calling
pm_runtime_disable when error returns.

Fixes: 955ac624058f ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_C0D62E6D89818179A02A04A0C248F0DDC40A@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: intel: sof_sdw: Stop processing CODECs when enough are found

[ Upstream commit 28809aaeabdf2c01ffe597553146527d1fba3589 ]

When adding CODECs to a DAI link, the code should stop processing more
CODECs when the expected number of CODECs are discovered. This fixes a
small corner case issue introduced when support for different devices
on the same SoundWire link was added. In the case of aggregated
devices everything is fine, as all devices intended for the DAI link
will be marked with the same group and any not intended for that DAI
are skipped by the group check. However for non-aggregated devices the
group check is bypassed and the current code does not stop after it
has found the first device. Meaning if additional non-aggregated devices
are present on the same SoundWire link they will be erroneously added
into the DAI link.

Fix this issue, and provide a small optimisation by ceasing to process
devices once we have reached the required number of devices for the
current DAI link.

Fixes: 317dcdecaf7a ("ASoC: intel: sof_sdw: Allow different devices on the same link")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: core: Ensure sof_ops_free() is still called when probe never ran.

[ Upstream commit f549a82aff57865c47b5abd17336b23cd9bb2d2c ]

In an effort to not call sof_ops_free twice, we stopped running it when
probe was aborted.

Check the result of cancel_work_sync to see if this was the case.

Fixes: 31bb7bd9ffee ("ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful")
Cc: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-2-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix init failure of RoCE VF and HIP08

[ Upstream commit 07f06e0e5cd99555c861e874716d9e2627655fd5 ]

During device init, a struct for HW stats will be allocated. As HW
stats are not supported for VF and HIP08, currently
hns_roce_alloc_hw_port_stats() returns NULL in this case. However,
ib-core considers the returned NULL pointer as memory allocation
failure and returns ENOMEM, eventually leading to the failure of VF
and HIP08 init.

In the case where the driver does not support the .alloc_hw_port_stats()
ops, ib-core will return EOPNOTSUPP and ignore this error code in the
upper layer function. So for VF and HIP08, just don't set the HW stats
ops to ib-core.

Fixes: 5a87279591a1 ("RDMA/hns: Support hns HW stats")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-8-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix unnecessary port_num transition in HW stats allocation

[ Upstream commit b4a797b894dc91a541ea230db6fa00cc74683bfd ]

The num_ports capability of devices should be compared with the
number of port(i.e. the input param "port_num") but not the port
index(i.e. port_num - 1).

Fixes: 5a87279591a1 ("RDMA/hns: Support hns HW stats")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-7-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: The UD mode can only be configured with DCQCN

[ Upstream commit 27c5fd271d8b8730fc0bb1b6cae953ad7808a874 ]

Due to hardware limitations, only DCQCN is supported for UD. Therefore, the
default algorithm for UD is set to DCQCN.

Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Add check for SL

[ Upstream commit 5e617c18b1f34ec57ad5dce44f09de603cf6bd6c ]

SL set by users may exceed the capability of devices. So add check
for this situation.

Fixes: fba429fcf9a5 ("RDMA/hns: Fix missing fields in address vector")
Fixes: 70f92521584f ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Fixes: f0cb411aad23 ("RDMA/hns: Use new interface to modify QP context")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix signed-unsigned mixed comparisons

[ Upstream commit b5f9efff101b06fd06a5e280a2b00b1335f5f476 ]

The ib_mtu_enum_to_int() and uverbs_attr_get_len() may returns a negative
value. In this case, mixed comparisons of signed and unsigned types will
throw wrong results.

This patch adds judgement for this situation.

Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix uninitialized ucmd in hns_roce_create_qp_common()

[ Upstream commit c64e9710f9241e38a1c761ed1c1a30854784da66 ]

ucmd in hns_roce_create_qp_common() are not initialized. But it works fine
until new member sdb_addr is added to struct hns_roce_ib_create_qp.

If the user-mode driver uses an old version ABI, then the value of the new
member will be undefined after ib_copy_from_udata().

This patch fixes it by initialize this variable to 0. And the default value
of the new member sdb_addr will be 0 which is invalid.

Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix printing level of asynchronous events

[ Upstream commit 9faef73ef4f6666b97e04d99734ac09251098185 ]

The current driver will print all asynchronous events. Some of the
print levels are set improperly, e.g. SRQ limit reach and SRQ last
wqe reach, which may also occur during normal operation of the software.
Currently, the information of these event is printed as a warning,
which causes a large amount of printing even during normal use of the
application. As a result, the service performance deteriorates.

This patch fixes the printing storms by modifying the print level.

Fixes: b00a92c8f2ca ("RDMA/hns: Move all prints out of irq handle")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx5: Fix rdma counter binding for RAW QP

[ Upstream commit c1336bb4aa5e809a622a87d74311275514086596 ]

Previously when we had a RAW QP, we bound a counter to it when it moved
to INIT state, using the counter context inside RQC.

But when we try to modify that counter later in RTS state we used
modify QP which tries to change the counter inside QPC instead of RQC.

Now we correctly modify the counter set_id inside of RQC instead of QPC
for the RAW QP.

Fixes: d14133dd4161 ("IB/mlx5: Support set qp counter")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/2e5ab6713784a8fe997d19c508187a0dfecf2dfc.1696847964.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dlm: fix no ack after final message

[ Upstream commit 6212e4528b248a4bc9b4fe68e029a84689c67461 ]

In case of an final DLM message we can't should not send an ack out
after the final message. This patch moves the ack message before the
messages will be transmitted. If it's the final message and the
receiving node turns into DLM_CLOSED state another ack messages will
being received and turning the receiving node into DLM_ESTABLISHED
again.

Fixes: 1696c75f1864 ("fs: dlm: add send ack threshold and append acks to msgs")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dlm: be sure we reset all nodes at forced shutdown

[ Upstream commit e759eb3e27e5b624930548f1c0eda90da6e26ee9 ]

In case we running in a force shutdown in either midcomms or lowcomms
implementation we will make sure we reset all per midcomms node
information.

Fixes: 63e711b08160 ("fs: dlm: create midcomms nodes when configure")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dlm: fix remove member after close call

[ Upstream commit 2776635edc7fcd62e03cb2efb93c31f685887460 ]

The idea of commit 63e711b08160 ("fs: dlm: create midcomms nodes when
configure") is to set the midcomms node lifetime when a node joins or
leaves the cluster. Currently we can hit the following warning:

[10844.611495] ------------[ cut here ]------------
[10844.615913] WARNING: CPU: 4 PID: 84304 at fs/dlm/midcomms.c:1263
dlm_midcomms_remove_member+0x13f/0x180 [dlm]

or running in a state where we hit a midcomms node usage count in a
negative value:

[  260.830782] node 2 users dec count -1

The first warning happens when the a specific node does not exists and
it was probably removed but dlm_midcomms_close() which is called when a
node leaves the cluster. The second kernel log message is probably in a
case when dlm_midcomms_addr() is called when a joined the cluster but
due fencing a node leaved the cluster without getting removed from the
lockspace. If the node joins the cluster and it was removed from the
cluster due fencing the first call is to remove the node from lockspaces
triggered by the user space. In both cases if the node wasn't found or
the user count is zero, we should ignore any additional midcomms handling
of dlm_midcomms_remove_member().

Fixes: 63e711b08160 ("fs: dlm: create midcomms nodes when configure")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dlm: fix creating multiple node structures

[ Upstream commit fe9b619e6e94acf0b068fb1a8f658f5a96b8fad7 ]

This patch will lookup existing nodes instead of always creating them
when dlm_midcomms_addr() is called. The idea is here to create midcomms
nodes when user space getting informed that nodes joins the cluster. This
is the case when dlm_midcomms_addr() is called, however it can be called
multiple times by user space to add several address configurations to one
node e.g. when using SCTP. Those multiple times need to be filtered out
and we doing that by looking up if the node exists before. Due configfs
entry it is safe that this function gets only called once at a time.

Fixes: 63e711b08160 ("fs: dlm: create midcomms nodes when configure")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: Fix the size of a buffer in dlm_create_debug_file()

[ Upstream commit b859e01054354033f480d9df41b0ebc2c7537379 ]

8 is not the maximum size of the suffix used when creating debugfs files.

Let the compiler compute the correct size, and only give a hint about the
longest possible string that is used.

When building with W=1, this fixes the following warnings:

  fs/dlm/debug_fs.c: In function ‘dlm_create_debug_file’:
  fs/dlm/debug_fs.c:1020:58: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
   1020 |         snprintf(name, DLM_LOCKSPACE_LEN + 8, "%s_waiters", ls->ls_name);
        |                                                          ^
  fs/dlm/debug_fs.c:1020:9: note: ‘snprintf’ output between 9 and 73 bytes into a destination of size 72
   1020 |         snprintf(name, DLM_LOCKSPACE_LEN + 8, "%s_waiters", ls->ls_name);
        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  fs/dlm/debug_fs.c:1031:50: error: ‘_queued_asts’ directive output may be truncated writing 12 bytes into a region of size between 8 and 72 [-Werror=format-truncation=]
   1031 |         snprintf(name, DLM_LOCKSPACE_LEN + 8, "%s_queued_asts", ls->ls_name);
        |                                                  ^~~~~~~~~~~~
  fs/dlm/debug_fs.c:1031:9: note: ‘snprintf’ output between 13 and 77 bytes into a destination of size 72
   1031 |         snprintf(name, DLM_LOCKSPACE_LEN + 8, "%s_queued_asts", ls->ls_name);
        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 541adb0d4d10b ("fs: dlm: debugfs for queued callbacks")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl-asoc-card: Add comment for mclk in the codec_priv

[ Upstream commit fbfe616ad40c06d68b83b657a94cd2e709dda37b ]

Otherwise a warning will be detected as below:
warning: Function parameter or member 'mclk' not described in
'codec_priv'

Fixes: 1075df4bdeb3 ("ASoC: fsl-asoc-card: add nau8822 support")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20231007040117.22446-1-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_sdw_rt_sdca_jack_common: add rt713 support

[ Upstream commit b6d6e5abf64562985fdbbdbdfe8088cde634d834 ]

Adding rt713 support to sof_sdw_rt_sdca_jack_common.c.

Fixes: fbaaf80d8cf6 ("ASoC: Intel: sof_sdw: add rt713 support")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

backlight: pwm_bl: Disable PWM on shutdown, suspend and remove

[ Upstream commit 40da4737717b252fd01d92ff38d3b95a491167cc ]

Since commit 00e7e698bff1 ("backlight: pwm_bl: Configure pwm only once
per backlight toggle") calling pwm_backlight_power_off() doesn't disable
the PWM any more. However this is necessary to suspend because PWM
drivers usually refuse to suspend if they are still enabled.

Also adapt shutdown and remove callbacks to disable the PWM for similar
reasons.

Fixes: 00e7e698bff1 ("backlight: pwm_bl: Configure pwm only once per backlight toggle")
Reported-by: Aisheng Dong <aisheng.dong@nxp.com>
Tested-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20231009093223.227286-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl: mpc5200_dma.c: Fix warning of Function parameter or member not described

[ Upstream commit 4a221b2e3340f4a3c2b414c46c846a26c6caf820 ]

This patch fixes the warnings of "Function parameter or member 'xxx'
not described".

>> sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'component' not described in 'psc_dma_trigger'
   sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'substream' not described in 'psc_dma_trigger'
   sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'cmd' not described in 'psc_dma_trigger'

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310061914.jJuekdHs-lkp@intel.com/
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Fixes: 6d1048bc1152 ("ASoC: fsl: mpc5200_dma: remove snd_pcm_ops")
Link: https://lore.kernel.org/r/87il7fcqm8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftest: vm: fix mdwe's mmap_FIXED test case

[ Upstream commit a27e2e2d465e4ed73371974040689ac3e78fe3ee ]

I checked with the original author, the mmap_FIXED test case wasn't
properly tested and fails.  Currently, it maps two consecutive (non
overlapping) pages and expects the second mapping to be denied by MDWE but
these two pages have nothing to do with each other so MDWE is actually out
of the picture here.

What the test actually intended to do was to remap a virtual address using
MAP_FIXED.  However, this operation unmaps the existing mapping and
creates a new one so the va is backed by a new page and MDWE is again out
of the picture, all remappings should succeed.

This patch keeps the test case to make it clear that this situation is
expected to work: MDWE shouldn't block a MAP_FIXED replacement.

Link: https://lkml.kernel.org/r/20230828150858.393570-3-revest@chromium.org
Fixes: 4cf1fe34fd18 ("kselftest: vm: add tests for memory-deny-write-execute")
Signed-off-by: Florent Revest <revest@chromium.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Ayush Jain <ayush.jain3@amd.com>
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
Cc: Topi Miettinen <toiwoton@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: move 'ix' sanity check to corrent position

[ Upstream commit af90a8f4a09ec4a3de20142e37f37205d4687f28 ]

Check 'ix' before it is used.

Fixes: 80e675f906db ("ext4: optimize memmmove lengths in extent/index insertions")
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Link: https://lore.kernel.org/r/20230906013341.7199-1-gouhao@uniontech.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: add missing initialization of call_notify_error in update_super_work()

[ Upstream commit ee6a12d0d4d85f3833d177cd382cd417f0ef011b ]

Fixes: ff0722de896e ("ext4: add periodic superblock update check")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9323/1: mm: Fix ARCH_LOW_ADDRESS_LIMIT when CONFIG_ZONE_DMA

[ Upstream commit 399da29ff5eb3f675c71423bec4cf2208f218576 ]

Configuring VMSPLIT_2G + LPAE on Raspberry Pi 4 leads to SWIOTLB
buffer allocation beyond platform dma_zone_size of SZ_1G, which
results in broken SD card boot.

So fix this be setting ARCH_LOW_ADDRESS_LIMIT in CONFIG_ZONE_DMA
case.

Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Fixes: e9faf9b0b07a ("ARM: add multi_v7_lpae_defconfig")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9321/1: memset: cast the constant byte to unsigned char

[ Upstream commit c0e824661f443b8cab3897006c1bbc69fd0e7bc4 ]

memset() description in ISO/IEC 9899:1999 (and elsewhere) says:

The memset function copies the value of c (converted to an
unsigned char) into each of the first n characters of the
object pointed to by s.

The kernel's arm32 memset does not cast c to unsigned char. This results
in the following code to produce erroneous output:

char a[128];
memset(a, -128, sizeof(a));

This is because gcc will generally emit the following code before
it calls memset() :

mov   r0, r7
mvn   r1, #127        ; 0x7f
bl    00000000 <memset>

r1 ends up with 0xffffff80 before being used by memset() and the
'a' array will have -128 once in every four bytes while the other
bytes will be set incorrectly to -1 like this (printing the first
8 bytes) :

test_module: -128 -1 -1 -1
test_module: -1 -1 -1 -128

The change here is to 'and' r1 with 255 before it is used.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kursad Oney <kursad.oney@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/qm - fix PF queue parameter issue

[ Upstream commit 5831fc1fd4a578232fea708b82de0c666ed17153 ]

If the queue isolation feature is enabled, the number of queues
supported by the device changes. When PF is enabled using the
current default number of queues, the default number of queues may
be greater than the number supported by the device. As a result,
the PF fails to be bound to the driver.

After modification, if queue isolation feature is enabled, when
the default queue parameter is greater than the number supported
by the device, the number of enabled queues will be changed to
the number supported by the device, so that the PF and driver
can be properly bound.

Fixes: 8bbecfb402f7 ("crypto: hisilicon/qm - add queue isolation support for Kunpeng930")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hid: cp2112: Fix duplicate workqueue initialization

[ Upstream commit e3c2d2d144c082dd71596953193adf9891491f42 ]

Previously the cp2112 driver called INIT_DELAYED_WORK within
cp2112_gpio_irq_startup, resulting in duplicate initilizations of the
workqueue on subsequent IRQ startups following an initial request. This
resulted in a warning in set_work_data in workqueue.c, as well as a rare
NULL dereference within process_one_work in workqueue.c.

Initialize the workqueue within _probe instead.

Fixes: 13de9cca514e ("HID: cp2112: add IRQ chip handling")
Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: vmd: Correct PCI Header Type Register's multi-function check

[ Upstream commit 5827e17d0555b566c32044b0632b46f9f95054fa ]

vmd_domain_reset() attempts to find whether the device may contain multiple
functions by checking 0x80 (Multi-Function Device), however, the hdr_type
variable has already been masked with PCI_HEADER_TYPE_MASK so the check can
never true.

To fix the issue, don't mask the read with PCI_HEADER_TYPE_MASK.

Fixes: 6aab5622296b ("PCI: vmd: Clean up domain before enumeration")
Link: https://lore.kernel.org/r/20231003125300.5541-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: ipc4-topology: Use size_add() in call to struct_size()

[ Upstream commit 3746284c233d5cf5f456400e61cd4a46a69c6e8c ]

If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.

Fixes: f9efae954905 ("ASoC: SOF: ipc4-topology: Add support for base config extension")
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZQSr15AYJpDpipg6@work
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - increase size of buffers

[ Upstream commit 4e4e2ed22d505c5bacf65c6a39bfb6d120d24785 ]

Increase the size of the buffers used for composing the names used for
the transport debugfs entries and the vector name to avoid a potential
truncation.

This resolves the following errors when compiling the driver with W=1
and KCFLAGS=-Werror on GCC 12.3.1:

    drivers/crypto/intel/qat/qat_common/adf_transport_debug.c: In function ‘adf_ring_debugfs_add’:
    drivers/crypto/intel/qat/qat_common/adf_transport_debug.c:100:60: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
    drivers/crypto/intel/qat/qat_common/adf_isr.c: In function ‘adf_isr_resource_alloc’:
    drivers/crypto/intel/qat/qat_common/adf_isr.c:197:47: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 5 [-Werror=format-truncation=]

Fixes: a672a9dc872e ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: caam/jr - fix Chacha20 + Poly1305 self test failure

[ Upstream commit a8d3cdcc092fb2f2882acb6c20473a1be0ef4484 ]

key buffer is not copied in chachapoly_setkey function,
results in wrong output for encryption/decryption operation.

fix this by memcpy the key in caam_ctx key arrary

Fixes: d6bbd4eea243 ("crypto: caam/jr - add support for Chacha20 + Poly1305")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: caam/qi2 - fix Chacha20 + Poly1305 self test failure

[ Upstream commit 7b8c6aee0d5b864e70c0da82583f9862e374eaf3 ]

key buffer is not copied in chachapoly_setkey function,
results in wrong output for encryption/decryption operation.

fix this by memcpy the key in caam_ctx key arrary

Fixes: c10a53367901 ("crypto: caam/qi2 - add support for Chacha20 + Poly1305")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nd_btt: Make BTT lanes preemptible

[ Upstream commit 36c75ce3bd299878fd9b238e9803d3817ddafbf3 ]

nd_region_acquire_lane uses get_cpu, which disables preemption. This is
an issue on PREEMPT_RT kernels, since btt_write_pg and also
nd_region_acquire_lane itself take a spin lock, resulting in BUG:
sleeping function called from invalid context.

Fix the issue by replacing get_cpu with smp_process_id and
migrate_disable when needed. This makes BTT operations preemptible, thus
permitting the use of spin_lock.

BUG example occurring when running ndctl tests on PREEMPT_RT kernel:

BUG: sleeping function called from invalid context at
kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 4903, name:
libndctl
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Preemption disabled at:
[<ffffffffc1313db5>] nd_region_acquire_lane+0x15/0x90 [libnvdimm]
Call Trace:
 <TASK>
 dump_stack_lvl+0x8e/0xb0
 __might_resched+0x19b/0x250
 rt_spin_lock+0x4c/0x100
 ? btt_write_pg+0x2d7/0x500 [nd_btt]
 btt_write_pg+0x2d7/0x500 [nd_btt]
 ? local_clock_noinstr+0x9/0xc0
 btt_submit_bio+0x16d/0x270 [nd_btt]
 __submit_bio+0x48/0x80
 __submit_bio_noacct+0x7e/0x1e0
 submit_bio_wait+0x58/0xb0
 __blkdev_direct_IO_simple+0x107/0x240
 ? inode_set_ctime_current+0x51/0x110
 ? __pfx_submit_bio_wait_endio+0x10/0x10
 blkdev_write_iter+0x1d8/0x290
 vfs_write+0x237/0x330
 ...
 </TASK>

Fixes: 5212e11fde4d ("nd_btt: atomic sector updates")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libnvdimm/of_pmem: Use devm_kstrdup instead of kstrdup and check its return value

[ Upstream commit 6fd4ebfc4d61e3097b595ab2725d513e3bbd6739 ]

Use devm_kstrdup() instead of kstrdup() and check its return value to
avoid memory leak.

Fixes: 49bddc73d15c ("libnvdimm/of_pmem: Provide a unique name for bus provider")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-pcm.c: Make sure DAI parameters cleared if the DAI becomes inactive

[ Upstream commit 3efcb471f871cc095841d411f98c593228ecbac6 ]

The commit 1da681e52853 ("ASoC: soc-pcm.c: Clear DAIs parameters after
stream_active is updated") tries to make sure DAI parameters can be
cleared properly through moving the cleanup to the place where stream
active status is updated. However, it will cause the cleanup only
happening in soc_pcm_close().

Suppose a case: aplay -Dhw:0 44100.wav 48000.wav. The case calls
soc_pcm_open()->soc_pcm_hw_params()->soc_pcm_hw_free()->
soc_pcm_hw_params()->soc_pcm_hw_free()->soc_pcm_close() in order. The
parameters would be remained in the system even if the playback of
44100.wav is finished.

The case requires us clearing parameters in phase of soc_pcm_hw_free().
However, moving the DAI parameters cleanup back to soc_pcm_hw_free()
has the risk that DAIs parameters never be cleared if there're more
than one stream, see commit 1da681e52853 ("ASoC: soc-pcm.c: Clear DAIs
parameters after stream_active is updated") for more details.

To meet all these requirements, in addition to do DAI parameters
cleanup in soc_pcm_hw_free(), also check it in soc_pcm_close() to make
sure DAI parameters cleared if the DAI becomes inactive.

Fixes: 1da681e52853 ("ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://lore.kernel.org/r/20230920153621.711373-2-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ibmvfc: Fix erroneous use of rtas_busy_delay with hcall return code

[ Upstream commit 670106eb4c8b23475f8c2b3416005a312afa622f ]

Commit 0217a272fe13 ("scsi: ibmvfc: Store return code of H_FREE_SUB_CRQ
during cleanup") wrongly changed the busy loop check to use
rtas_busy_delay() instead of H_BUSY and H_IS_LONG_BUSY(). The busy return
codes for RTAS and hypercalls are not the same.

Fix this issue by restoring the use of H_BUSY and H_IS_LONG_BUSY().

Fixes: 0217a272fe13 ("scsi: ibmvfc: Store return code of H_FREE_SUB_CRQ during cleanup")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-5-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix unregistration of compression algorithms

[ Upstream commit 11af152f784d9eca54e193140891ac52de36e9a9 ]

The function adf_dev_init(), through the subsystem qat_compression,
populates the list of list of compression instances
accel_dev->compression_list. If the list of instances is not empty,
the function adf_dev_start() will then call qat_compression_registers()
register the compression algorithms into the crypto framework.

If any of the functions in adf_dev_start() fail, the caller of such
function, in the error path calls adf_dev_down() which in turn call
adf_dev_stop() and adf_dev_shutdown(), see for example the function
state_store in adf_sriov.c.
However, if the registration of compression algorithms is not done,
adf_dev_stop() will try to unregister the algorithms regardless.
This might cause the counter active_devs in qat_compression.c to get
to a negative value.

Add a new state, ADF_STATUS_COMPRESSION_ALGS_REGISTERED, which tracks
if the compression algorithms are registered into the crypto framework.
Then use this to unregister the algorithms if such flag is set. This
ensures that the compression algorithms are only unregistered if
previously registered.

Fixes: 1198ae56c9a5 ("crypto: qat - expose deflate through acomp api for QAT GEN2")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix unregistration of crypto algorithms

[ Upstream commit 9b2f33a1bfcda90b857431a764c9c8f9a412bbe5 ]

The function adf_dev_init(), through the subsystem qat_crypto, populates
the list of list of crypto instances accel_dev->crypto_list.
If the list of instances is not empty, the function adf_dev_start() will
then call qat_algs_registers() and qat_asym_algs_register() to register
the crypto algorithms into the crypto framework.

If any of the functions in adf_dev_start() fail, the caller of such
function, in the error path calls adf_dev_down() which in turn call
adf_dev_stop() and adf_dev_shutdown(), see for example the function
state_store in adf_sriov.c.
However, if the registration of crypto algorithms is not done,
adf_dev_stop() will try to unregister the algorithms regardless.
This might cause the counter active_devs in qat_algs.c and
qat_asym_algs.c to get to a negative value.

Add a new state, ADF_STATUS_CRYPTO_ALGS_REGISTERED, which tracks if the
crypto algorithms are registered into the crypto framework. Then use
this to unregister the algorithms if such flag is set. This ensures that
the crypto algorithms are only unregistered if previously registered.

Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - ignore subsequent state up commands

[ Upstream commit 9c20cb8b1847dedddec3d5163079290542bf00bf ]

If the device is already in the up state, a subsequent write of `up` to
the sysfs attribute /sys/bus/pci/devices/<BDF>/qat/state brings the
device down.
Fix this behaviour by ignoring subsequent `up` commands if the device is
already in the up state.

Fixes: 1bdc85550a2b ("crypto: qat - fix concurrency issue when device state changes")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix state machines cleanup paths

[ Upstream commit c9ca9756f376f51f985130a0e599d956065d4c44 ]

Commit 1bdc85550a2b ("crypto: qat - fix concurrency issue when device
state changes") introduced the function adf_dev_down() which wraps the
functions adf_dev_stop() and adf_dev_shutdown().
In a subsequent change, the sequence adf_dev_stop() followed by
adf_dev_shutdown() was then replaced across the driver with just a call
to the function adf_dev_down().

The functions adf_dev_stop() and adf_dev_shutdown() are called in error
paths to stop the accelerator and free up resources and can be called
even if the counterparts adf_dev_init() and adf_dev_start() did not
complete successfully.
However, the implementation of adf_dev_down() prevents the stop/shutdown
sequence if the device is found already down.
For example, if adf_dev_init() fails, the device status is not set as
started and therefore a call to adf_dev_down() won't be calling
adf_dev_shutdown() to undo what adf_dev_init() did.

Do not check if a device is started in adf_dev_down() but do the
equivalent check in adf_sysfs.c when handling a DEV_DOWN command from
the user.

Fixes: 2b60f79c7b81 ("crypto: qat - replace state machine calls")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Use size_{add,sub,mul}() in calls to struct_size()

[ Upstream commit 81760bedc65194ff38e1e4faefd5f9f0c95c19a4 ]

If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` provides against potential integer
overflows is defeated. Fix this by hardening calls to `struct_size()`
with `size_add()`, `size_sub()` and `size_mul()`.

Fixes: 467f432a521a ("RDMA/core: Split port and device counter sysfs attributes")
Fixes: a4676388e2e2 ("RDMA/core: Simplify how the gid_attrs sysfs is created")
Fixes: e9dd5daf884c ("IB/umad: Refactor code to use cdev_device_add()")
Fixes: 324e227ea7c9 ("RDMA/device: Add ib_device_get_by_netdev()")
Fixes: 5aad26a7eac5 ("IB/core: Use struct_size() in kzalloc()")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZQdt4NsJFwwOYxUR@work
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: geode - fix accessing registers

[ Upstream commit 464bd8ec2f06707f3773676a1bd2c64832a3c805 ]

When the membase and pci_dev pointer were moved to a new struct in priv,
the actual membase users were left untouched, and they started reading
out arbitrary memory behind the struct instead of registers. This
unfortunately turned the RNG into a constant number generator, depending
on the content of what was at that offset.

To fix this, update geode_rng_data_{read,present}() to also get the
membase via amd_geode_priv, and properly read from the right addresses
again.

Fixes: 9f6ec8dc574e ("hwrng: geode - Fix PCI device refcount leak")
Reported-by: Timur I. Davletshin <timur.davletshin@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217882
Tested-by: Timur I. Davletshin <timur.davletshin@gmail.com>
Suggested-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: bcm2835 - Fix hwrng throughput regression

[ Upstream commit b58a36008bfa1aadf55f516bcbfae40c779eb54b ]

The last RCU stall fix caused a massive throughput regression of the
hwrng on Raspberry Pi 0 - 3. hwrng_msleep doesn't sleep precisely enough
and usleep_range doesn't allow scheduling. So try to restore the
best possible throughput by introducing hwrng_yield which interruptable
sleeps for one jiffy.

Some performance measurements on Raspberry Pi 3B+ (arm64/defconfig):

sudo dd if=/dev/hwrng of=/dev/null count=1 bs=10000

cpu_relax              ~138025 Bytes / sec
hwrng_msleep(1000)         ~13 Bytes / sec
hwrng_yield              ~2510 Bytes / sec

Fixes: 96cb9d055445 ("hwrng: bcm2835 - use hwrng_msleep() instead of cpu_relax()")
Link: https://lore.kernel.org/linux-arm-kernel/bc97ece5-44a3-4c4e-77da-2db3eb66b128@gmx.net/
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/hpre - Fix a erroneous check after snprintf()

[ Upstream commit c977950146720abff14e46d8c53f5638b06a9182 ]

This error handling looks really strange.
Check if the string has been truncated instead.

Fixes: 02ab994635eb ("crypto: hisilicon - Fixed some tiny bugs of HPRE")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Fix some unfused tests

[ Upstream commit 7b3c2348d314a18f6ed84bab67023ae5d1ec6b1e ]

Some of the tests for unfused parts referenced a named member parameter,
but when the test suite was switched to call a python ctypes library they
weren't updated.  Adjust them to refer to the first argument of the
process_param() call and set the data type of the signature appropriately.

Fixes: 15f8aa7bb3e5 ("crypto: ccp - Add unit tests for dynamic boost control")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Fix sample application signature passing

[ Upstream commit 2ad01eb5fad24627ab4e196dc54a220753b2238b ]

When parameters are sent the PSP returns back it's own signature
for the application to verify the authenticity of the result.

Display this signature to the caller instead of the one the caller
sent.

Fixes: f40d42f116cf ("crypto: ccp - Add a sample python script for Dynamic Boost Control")
Fixes: febe3ed3222f ("crypto: ccp - Add a sample library for ioctl use")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Fix DBC sample application error handling

[ Upstream commit 70f242c1933e9e881c13c31640bb6d56e8b7e738 ]

The sample application was taking values from ioctl() and treating
those as the error codes to present to a user.

This is incorrect when ret is non-zero, the error is stored to `errno`.
Use this value instead.

Fixes: f40d42f116cf ("crypto: ccp - Add a sample python script for Dynamic Boost Control")
Fixes: febe3ed3222f ("crypto: ccp - Add a sample library for ioctl use")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Fix ioctl unit tests

[ Upstream commit 7f71c3e033824e1da237916a1885e3c0699f86b2 ]

A local environment change was importing ioctl_opt which is required
for ioctl tests to pass.  Add the missing import for it.

Fixes: 15f8aa7bb3e5 ("crypto: ccp - Add unit tests for dynamic boost control")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Get a free page to use while fetching initial nonce

[ Upstream commit 53f7f779f45cbe1771bc4ae05f0320e204a18611 ]

dbc_dev_init() gets a free page from `GFP_KERNEL`, but if that page has
any data in it the first nonce request will fail.
This prevents dynamic boost control from probing. To fix this, explicitly
request a zeroed page with `__GFP_ZERO` to ensure first nonce fetch works.

Fixes: c04cf9e14f10 ("crypto: ccp - Add support for fetching a nonce for dynamic boost control")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KEYS: Include linux/errno.h in linux/verification.h

[ Upstream commit 0a596b0682a7ce37e26c36629816f105c6459d06 ]

Add inclusion of linux/errno.h as otherwise the reference to EINVAL
may be invalid.

Fixes: f3cf4134c5c6 ("bpf: Add bpf_lookup_*_key() and bpf_key_put() kfuncs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308261414.HKw1Mrip-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: cs35l41: Undo runtime PM changes at driver exit time

[ Upstream commit 85a1bf86fac0c195929768b4e92c78cad107523b ]

According to the documentation, drivers are responsible for undoing at
removal time all runtime PM changes done during probing.

Hence, add the missing calls to pm_runtime_dont_use_autosuspend(), which
are necessary for undoing pm_runtime_use_autosuspend().

Fixes: 1873ebd30cc8 ("ALSA: hda: cs35l41: Support Hibernation during Suspend")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-11-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: cs35l41: Fix unbalanced pm_runtime_get()

[ Upstream commit 486465508f8a5fe441939a7d97607f4460a60891 ]

If component_add() fails, probe() returns without calling
pm_runtime_put(), which leaves the runtime PM usage counter incremented.

Fix the issue by jumping to err_pm label and drop the now unnecessary
pm_runtime_disable() call.

Fixes: 7b2f3eb492da ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-10-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs35l41: Undo runtime PM changes at driver exit time

[ Upstream commit 2d5661e6008ae1a1cd6df7cc844908fb8b982c58 ]

According to the documentation, drivers are responsible for undoing at
removal time all runtime PM changes done during probing.

Hence, add the missing calls to pm_runtime_dont_use_autosuspend(), which
are necessary for undoing pm_runtime_use_autosuspend().

Note this would have been handled implicitly by
devm_pm_runtime_enable(), but there is a need to continue using
pm_runtime_enable()/pm_runtime_disable() in order to ensure the runtime
PM is disabled as soon as the remove() callback is entered.

Fixes: f517ba4924ad ("ASoC: cs35l41: Add support for hibernate memory retention mode")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-7-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs35l41: Verify PM runtime resume errors in IRQ handler

[ Upstream commit 9f8948db9849d202dee3570507d3a0642f92d632 ]

The interrupt handler invokes pm_runtime_get_sync() without checking the
returned error code.

Add a proper verification and switch to pm_runtime_resume_and_get(), to
avoid the need to call pm_runtime_put_noidle() for decrementing the PM
usage counter before returning from the error condition.

Fixes: f517ba4924ad ("ASoC: cs35l41: Add support for hibernate memory retention mode")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-6-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs35l41: Fix broken shared boost activation

[ Upstream commit 77bf613f0bf08c021309cdb5f84b5f630b829261 ]

Enabling the active/passive shared boosts requires setting SYNC_EN, but
*not* before receiving the PLL Lock signal.

Due to improper error handling, it was not obvious that waiting for the
completion operation times out and, consequently, the shared boost is
never activated.

Further investigations revealed the signal is triggered while
snd_pcm_start() is executed, right after receiving the
SNDRV_PCM_TRIGGER_START command, which happens long after the
SND_SOC_DAPM_PRE_PMU event handler is invoked as part of
snd_pcm_prepare().  That is where cs35l41_global_enable() is called
from.

Increasing the wait duration doesn't help, as it only causes an
unnecessary delay in the invocation of snd_pcm_start().  Moving the wait
and the subsequent regmap operations to the SNDRV_PCM_TRIGGER_START
callback is not a solution either, since they would be executed in an
IRQ-off atomic context.

Solve the issue by setting the SYNC_EN bit in PWR_CTRL3 register right
after receiving the PLL Lock interrupt.

Additionally, drop the unnecessary writes to PWR_CTRL1 register, part of
the original mdsync_up_seq, which would have toggled GLOBAL_EN with
unwanted consequences on PLL locking behavior.

Fixes: f5030564938b ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-5-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs35l41: Initialize completion object before requesting IRQ

[ Upstream commit 5ad668a9ce83d819701fb7abc1c2236049ec15c2 ]

Technically, an interrupt handler can be called before probe() finishes
its execution, hence ensure the pll_lock completion object is always
initialized before being accessed in cs35l41_irq().

Fixes: f5030564938b ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-4-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs35l41: Handle mdsync_up reg write errors

[ Upstream commit 4bb5870ab60abca6ad18196090831b5e4cf82d93 ]

The return code of regmap_multi_reg_write() call related to "MDSYNC up"
sequence is shadowed by the subsequent regmap_read_poll_timeout()
invocation, which will hit a timeout in case the write operation above
fails.

Make sure cs35l41_global_enable() returns the correct error code instead
of -ETIMEDOUT.

Additionally, to be able to distinguish between the timeouts of
wait_for_completion_timeout() and regmap_read_poll_timeout(), print an
error message for the former and return immediately.  This also avoids
having to wait unnecessarily for the second time.

Fixes: f8264c759208 ("ALSA: cs35l41: Poll for Power Up/Down rather than waiting a fixed delay")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs35l41: Handle mdsync_down reg write errors

[ Upstream commit a9a3f54a23d844971c274f352500dddeadb4412c ]

The return code of regmap_multi_reg_write() call related to "MDSYNC
down" sequence is shadowed by the subsequent
wait_for_completion_timeout() invocation, which is expected to time
timeout in case the write operation failed.

Let cs35l41_global_enable() return the correct error code instead of
-ETIMEDOUT.

Fixes: f5030564938b ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

module/decompress: use vmalloc() for gzip decompression workspace

[ Upstream commit 3737df782c740b944912ed93420c57344b1cf864 ]

Use a similar approach as commit a419beac4a07 ("module/decompress: use
vmalloc() for zstd decompression workspace") and replace kmalloc() with
vmalloc() also for the gzip module decompression workspace.

In this case the workspace is represented by struct inflate_workspace
that can be fairly large for kmalloc() and it can potentially lead to
allocation errors on certain systems:

$ pahole inflate_workspace
struct inflate_workspace {
struct inflate_state       inflate_state;        /*     0  9544 */
/* --- cacheline 149 boundary (9536 bytes) was 8 bytes ago --- */
unsigned char              working_window[32768]; /*  9544 32768 */

/* size: 42312, cachelines: 662, members: 2 */
/* last cacheline: 8 bytes */
};

Considering that there is no need to use continuous physical memory,
simply switch to vmalloc() to provide a more reliable in-kernel module
decompression.

Fixes: b1ae6dc41eaa ("module: add in-kernel support for decompressing")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommufd: Add iopt_area_alloc()

[ Upstream commit 361d744ddd61de065fbeb042aaed590d32dd92ec ]

We never initialize the two interval tree nodes, and zero fill is not the
same as RB_CLEAR_NODE. This can hide issues where we missed adding the
area to the trees. Factor out the allocation and clear the two nodes.

Fixes: 51fe6141f0f6 ("iommufd: Data structure to provide IOVA to PFN mapping")
Link: https://lore.kernel.org/r/20231030145035.GG691768@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports

[ Upstream commit 473baeab929444295b0530f8766e4becb6a08973 ]

When redescribing ports I assumed that missing "label" (like "cpu")
means switch port isn't used. That was incorrect and I realized my
change made Linux always use the first (5) CPU port (there are 3 of
them).

While above should technically be possible it often isn't correct:
1. Non-default switch ports are often connected to Ethernet interfaces
   not fully covered by vendor setup (they may miss MACs)
2. On some devices non-default ports require specifying fixed link

This fixes network connectivity for some devices. It was reported &
tested for Netgear R8000. It also affects Linksys EA9200 with its
downstream DTS.

Fixes: ba4aebce23b2 ("ARM: dts: BCM5301X: Describe switch ports in the main DTS")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20231013103314.10306-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: pmic_glink: fix connector type to be DisplayPort

[ Upstream commit f86955f2b1ff9fbc7ae4f6595112b2f896885366 ]

As it was pointed out by Simon Ser, the DRM_MODE_CONNECTOR_USB connector
is reserved for the GUD devices. Other drivers (i915, amdgpu) use
DRM_MODE_CONNECTOR_DisplayPort even if the DP stream is handled by the
USB-C altmode. While we are still working on implementing the proper way
to let userspace know that the DP is wrapped into USB-C, change
connector type to be DRM_MODE_CONNECTOR_DisplayPort.

Fixes: 080b4e24852b ("soc: qcom: pmic_glink: Introduce altmode support")
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://lore.kernel.org/r/20231010225229.77027-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/resctrl: Ensure the benchmark commands fits to its array

[ Upstream commit 4a28c7665c2a1ac0400864eabb0c641e135f61aa ]

Benchmark command is copied into an array in the stack. The array is
BENCHMARK_ARGS items long but the command line could try to provide a
longer command. Argument size is also fixed by BENCHMARK_ARG_SIZE (63
bytes of space after fitting the terminating \0 character) and user
could have inputted argument longer than that.

Return error in case the benchmark command does not fit to the space
allocated for it.

Fixes: ecdbb911f22d ("selftests/resctrl: Add MBM test")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/pidfd: Fix ksft print formats

[ Upstream commit 4d7f4e8158b62f63031510cdc24acc520956c091 ]

Compiling pidfd selftest after adding a __printf() attribute to
ksft_print_msg() and ksft_test_result_pass() exposes -Wformat warnings
in error_report(), test_pidfd_poll_exec_thread(),
child_poll_exec_test(), test_pidfd_poll_leader_exit_thread(),
child_poll_leader_exit_test().

The ksft_test_result_pass() in error_report() expects a string but
doesn't provide any argument after the format string. All the other
calls to ksft_print_msg() in the functions mentioned above have format
strings that don't match with other passed arguments.

Fix format specifiers so they match the passed variables.

Add a missing variable to ksft_test_result_pass() inside
error_report() so it matches other cases in the switch statement.

Fixes: 2def297ec7fb ("pidfd: add tests for NSpid info in fdinfo")
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Use correct interrupts for Tegra234 TKE

[ Upstream commit c0b80988eb78d6423249ab530bfbc6b238790a26 ]

The shared interrupts 0-9 of the TKE are mapped to interrupts 0-9, but
shared interrupts 10-15 are mapped to 256-261. Correct the mapping for
the final 6 interrupts. This prevents the TKE from requesting the RTC
interrupt (along with several GTE and watchdog interrupts).

Reported-by: Shubhi Garg <shgarg@nvidia.com>
Fixes: 28d860ed02c2 ("arm64: tegra: Enable native timers on Tegra234")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: tegra: Set BPMP msg flags to reset IPC channels

[ Upstream commit f344675a34383ae26a8230f4b1cd99cbd0defebd ]

Set the 'TEGRA_BPMP_MESSAGE_RESET' bit in newly added 'flags' field
of 'struct tegra_bpmp_message' to request for the reset of BPMP IPC
channels. This is used along with the 'suspended' check in BPMP driver
for handling early bandwidth requests due to the hotplug of CPU's
during system resume before the driver gets resumed.

Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth")
Co-developed-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: tegra: Add suspend hook and reset BPMP IPC early on resume

[ Upstream commit ea608a01d4ee66f8b51070e623f9adb8684c0dd4 ]

Add suspend hook and a 'suspended' field in the 'struct tegra_bpmp'
to mark if BPMP is suspended. Also, add a 'flags' field in the
'struct tegra_bpmp_message' whose 'TEGRA_BPMP_MESSAGE_RESET' bit can be
set from the Tegra MC driver to signal that the reset of BPMP IPC
channels is required before sending MRQ to the BPMP FW. Together both
the fields allow us to handle any requests that might be sent too soon
as they can cause hang during system resume.

One case where we see BPMP requests being sent before the BPMP driver
has resumed is the memory bandwidth requests which are triggered by
onlining the CPUs during system resume. The CPUs are onlined before the
BPMP has resumed and we need to reset the BPMP IPC channels to handle
these requests.

The additional check for 'flags' is done to avoid any un-intended BPMP
IPC reset if the tegra_bpmp_transfer*() API gets called during suspend
sequence after the BPMP driver is suspended.

Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth")
Co-developed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Fix P3767 QSPI speed

[ Upstream commit 57ea99ba176913c325fc8324a24a1b5e8a6cf520 ]

The QSPI device used on Jetson Orin NX and Nano modules (p3767) is
the same as Jetson AGX Orin (p3701) and should have a maximum speed of
102 MHz.

Fixes: 13b0aca303e9 ("arm64: tegra: Support Jetson Orin NX")
Signed-off-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Fix P3767 card detect polarity

[ Upstream commit c6b7a1d11d0fa6333078141251908f48042016e1 ]

The SD card detect pin is active-low on all Orin Nano and NX SKUs that
have an SD card slot.

Fixes: 13b0aca303e9 ("arm64: tegra: Support Jetson Orin NX")
Signed-off-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mn: Add sound-dai-cells to micfil node

[ Upstream commit db1925454a2e7cadcac8756442ca7c3198332336 ]

Per the DT bindings, the micfil node should have a sound-dai-cells
entry.

Fixes: cca69ef6eba5 ("arm64: dts: imx8mn: Add support for micfil")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>