vdpa/mlx5: Initialize CVQ vringh only once

[ Upstream commit ace9252446ec615cd79a5f77d90edb25c0b9d024 ]

Currently, CVQ vringh is initialized inside setup_virtqueues() which is
called every time a memory update is done. This is undesirable since it
resets all the context of the vring, including the available and used
indices.

Move the initialization to mlx5_vdpa_set_status() when
VIRTIO_CONFIG_S_DRIVER_OK is set.

Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220613075958.511064-2-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/xive/spapr: correct bitmap allocation size

[ Upstream commit 19fc5bb93c6bbdce8292b4d7eed04e2fa118d2fe ]

kasan detects access beyond the end of the xibm->bitmap allocation:

BUG: KASAN: slab-out-of-bounds in _find_first_zero_bit+0x40/0x140
Read of size 8 at addr c00000001d1d0118 by task swapper/0/1

CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00001-g90df023b36dd #28
Call Trace:
[c00000001d98f770] [c0000000012baab8] dump_stack_lvl+0xac/0x108 (unreliable)
[c00000001d98f7b0] [c00000000068faac] print_report+0x37c/0x710
[c00000001d98f880] [c0000000006902c0] kasan_report+0x110/0x354
[c00000001d98f950] [c000000000692324] __asan_load8+0xa4/0xe0
[c00000001d98f970] [c0000000011c6ed0] _find_first_zero_bit+0x40/0x140
[c00000001d98f9b0] [c0000000000dbfbc] xive_spapr_get_ipi+0xcc/0x260
[c00000001d98fa70] [c0000000000d6d28] xive_setup_cpu_ipi+0x1e8/0x450
[c00000001d98fb30] [c000000004032a20] pSeries_smp_probe+0x5c/0x118
[c00000001d98fb60] [c000000004018b44] smp_prepare_cpus+0x944/0x9ac
[c00000001d98fc90] [c000000004009f9c] kernel_init_freeable+0x2d4/0x640
[c00000001d98fd90] [c0000000000131e8] kernel_init+0x28/0x1d0
[c00000001d98fe10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64

Allocated by task 0:
 kasan_save_stack+0x34/0x70
 __kasan_kmalloc+0xb4/0xf0
 __kmalloc+0x268/0x540
 xive_spapr_init+0x4d0/0x77c
 pseries_init_irq+0x40/0x27c
 init_IRQ+0x44/0x84
 start_kernel+0x2a4/0x538
 start_here_common+0x1c/0x20

The buggy address belongs to the object at c00000001d1d0118
 which belongs to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes inside of
 8-byte region [c00000001d1d0118, c00000001d1d0120)

The buggy address belongs to the physical page:
page:c00c000000074740 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc00000001d1d0558 pfn:0x1d1d
flags: 0x7ffff000000200(slab|node=0|zone=0|lastcpupid=0x7ffff)
raw: 007ffff000000200 c00000001d0003c8 c00000001d0003c8 c00000001d010480
raw: c00000001d1d0558 0000000001e1000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 c00000001d1d0000: fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 c00000001d1d0080: fc fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc
>c00000001d1d0100: fc fc fc 02 fc fc fc fc fc fc fc fc fc fc fc fc
                            ^
 c00000001d1d0180: fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc fc
 c00000001d1d0200: fc fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc

This happens because the allocation uses the wrong unit (bits) when it
should pass (BITS_TO_LONGS(count) * sizeof(long)) or equivalent. With small
numbers of bits, the allocated object can be smaller than sizeof(long),
which results in invalid accesses.

Use bitmap_zalloc() to allocate and initialize the irq bitmap, paired with
bitmap_free() for consistency.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220623182509.3985625-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: use SOCK_NONBLOCK type for kernel_accept()

[ Upstream commit fe0fde09e1cb83effcf8fafa372533f438d93a1a ]

I found that normally it is O_NONBLOCK but there are different value
for some arch.

/include/linux/net.h:
#ifndef SOCK_NONBLOCK
#define SOCK_NONBLOCK   O_NONBLOCK
#endif

/arch/alpha/include/asm/socket.h:
#define SOCK_NONBLOCK   0x40000000

Use SOCK_NONBLOCK instead of O_NONBLOCK for kernel_accept().

Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Namjae Jeon <linkinjeon@kerne.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: zoned: fix a leaked bioc in read_zone_info

[ Upstream commit 2963457829decf0c824a443238d251151ed18ff5 ]

The bioc would leak on the normal completion path and also on the RAID56
check (but that one won't happen in practice due to the invalid
combination with zoned mode).

Fixes: 7db1c5d14dcd ("btrfs: zoned: support dev-replace in zoned filesystems")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ update changelog ]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: rename btrfs_bio to btrfs_io_context

[ Upstream commit 4c6646117912397d026d70c04d92ec1599522e9f ]

The structure btrfs_bio is used by two different sites:

- bio->bi_private for mirror based profiles
  For those profiles (SINGLE/DUP/RAID1*/RAID10), this structures records
  how many mirrors are still pending, and save the original endio
  function of the bio.

- RAID56 code
  In that case, RAID56 only utilize the stripes info, and no long uses
  that to trace the pending mirrors.

So btrfs_bio is not always bind to a bio, and contains more info for IO
context, thus renaming it will make the naming less confusing.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm: sysctl: fix missing numa_stat when !CONFIG_HUGETLB_PAGE

[ Upstream commit 43b5240ca6b33108998810593248186b1e3ae34a ]

"numa_stat" should not be included in the scope of CONFIG_HUGETLB_PAGE, if
CONFIG_HUGETLB_PAGE is not configured even if CONFIG_NUMA is configured,
"numa_stat" is missed form /proc. Move it out of CONFIG_HUGETLB_PAGE to
fix it.

Fixes: 4518085e127d ("mm, sysctl: make NUMA stats configurable")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Fix acpi_video_handles_brightness_key_presses()

[ Upstream commit 5ad26161a371e4aa2d2553286f0cac580987a493 ]

Commit 3a0cf7ab8df3 ("ACPI: video: Change how we determine if brightness
key-presses are handled") made acpi_video_handles_brightness_key_presses()
report false when none of the ACPI Video Devices support backlight control.

But it turns out that at least on a Dell Inspiron N4010 there is no ACPI
backlight control, yet brightness hotkeys are still reported through
the ACPI Video Bus; and since acpi_video_handles_brightness_key_presses()
now returns false, brightness keypresses are now reported twice.

To fix this rename the has_backlight flag to may_report_brightness_keys and
also set it the first time a brightness key press event is received.

Depending on the delivery of the other ACPI (WMI) event vs the ACPI Video
Bus event this means that the first brightness key press might still get
reported twice, but all further keypresses will be filtered as before.

Note that this relies on other drivers reporting brightness key events
calling acpi_video_handles_brightness_key_presses() when delivering
the events (rather then once during driver probe). This is already
required and documented in include/acpi/video.h:

/*
 * Note: The value returned by acpi_video_handles_brightness_key_presses()
 * may change over time and should not be cached.
 */

Fixes: 3a0cf7ab8df3 ("ACPI: video: Change how we determine if brightness key-presses are handled")
Link: https://lore.kernel.org/regressions/CALF=6jEe5G8+r1Wo0vvz4GjNQQhdkLT5p8uCHn6ZXhg4nsOWow@mail.gmail.com/
Reported-and-tested-by: Ben Greening <bgreening@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220713211101.85547-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/tls: Check for errors in tls_device_init

[ Upstream commit 3d8c51b25a235e283e37750943bbf356ef187230 ]

Add missing error checks in tls_device_init.

Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220714070754.1428-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op()

[ Upstream commit 8a414f943f8b5f94bbaafdec863d6f3dbef33f8a ]

'vector' and 'trig_mode' fields of 'struct kvm_lapic_irq' are left
uninitialized in kvm_pv_kick_cpu_op(). While these fields are normally
not needed for APIC_DM_REMRD, they're still referenced by
__apic_accept_irq() for trace_kvm_apic_accept_irq(). Fully initialize
the structure to avoid consuming random stack memory.

Fixes: a183b638b61c ("KVM: x86: make apic_accept_irq tracepoint more generic")
Reported-by: syzbot+d6caa905917d353f0d07@syzkaller.appspotmail.com
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220708125147.593975-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: atlantic: remove aq_nic_deinit() when resume

[ Upstream commit 2e15c51fefaffaf9f72255eaef4fada05055e4c5 ]

aq_nic_deinit() has been called while suspending, so we don't have to call
it again on resume.
Actually, call it again leads to another hang issue when resuming from
S3.

Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992345] Call Trace:
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992346] <TASK>
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992348] aq_nic_deinit+0xb4/0xd0 [atlantic]
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992356] aq_pm_thaw+0x7f/0x100 [atlantic]
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992362] pci_pm_resume+0x5c/0x90
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992366] ? pci_pm_thaw+0x80/0x80
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992368] dpm_run_callback+0x4e/0x120
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992371] device_resume+0xad/0x200
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992373] async_resume+0x1e/0x40
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992374] async_run_entry_fn+0x33/0x120
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992377] process_one_work+0x220/0x3c0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992380] worker_thread+0x4d/0x3f0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992382] ? process_one_work+0x3c0/0x3c0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992384] kthread+0x12a/0x150
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992386] ? set_kthread_struct+0x40/0x40
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992387] ret_from_fork+0x22/0x30
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992391] </TASK>
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992392] ---[ end trace 1ec8c79604ed5e0d ]---
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992394] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992397] atlantic 0000:02:00.0: PM: failed to resume async: error -110

Fixes: 1809c30b6e5a ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20220713111224.1535938-2-acelan.kao@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: atlantic: remove deep parameter on suspend/resume functions

[ Upstream commit 0f33250760384e05c36466b0a2f92f3c6007ba92 ]

Below commit claims that atlantic NIC requires to reset the device on pm
op, and had set the deep to true for all suspend/resume functions.
commit 1809c30b6e5a ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
So, we could remove deep parameter on suspend/resume functions without
any functional change.

Fixes: 1809c30b6e5a ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20220713111224.1535938-1-acelan.kao@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: fix kernel panic when creating VF

[ Upstream commit ada74c5539eba06cf8b47d068f92e0b3963a9a6e ]

When creating VFs a kernel panic can happen when calling to
efx_ef10_try_update_nic_stats_vf.

When releasing a DMA coherent buffer, sometimes, I don't know in what
specific circumstances, it has to unmap memory with vunmap. It is
disallowed to do that in IRQ context or with BH disabled. Otherwise, we
hit this line in vunmap, causing the crash:
  BUG_ON(in_interrupt());

This patch reenables BH to release the buffer.

Log messages when the bug is hit:
 kernel BUG at mm/vmalloc.c:2727!
 invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
 CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G          I      --------- ---  5.14.0-119.el9.x86_64 #1
 Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020
 RIP: 0010:vunmap+0x2e/0x30
 ...skip...
 Call Trace:
  __iommu_dma_free+0x96/0x100
  efx_nic_free_buffer+0x2b/0x40 [sfc]
  efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc]
  efx_ef10_update_stats_vf+0x18/0x40 [sfc]
  efx_start_all+0x15e/0x1d0 [sfc]
  efx_net_open+0x5a/0xe0 [sfc]
  __dev_open+0xe7/0x1a0
  __dev_change_flags+0x1d7/0x240
  dev_change_flags+0x21/0x60
  ...skip...

Fixes: d778819609a2 ("sfc: DMA the VF stats only when requested")
Reported-by: Ma Yuying <yuma@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220713092116.21238-1-ihuguet@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

seg6: bpf: fix skb checksum in bpf_push_seg6_encap()

[ Upstream commit 4889fbd98deaf243c3baadc54e296d71c6af1eb0 ]

Both helper functions bpf_lwt_seg6_action() and bpf_lwt_push_encap() use
the bpf_push_seg6_encap() to encapsulate the packet in an IPv6 with Segment
Routing Header (SRH) or insert an SRH between the IPv6 header and the
payload.
To achieve this result, such helper functions rely on bpf_push_seg6_encap()
which, in turn, leverages seg6_do_srh_{encap,inline}() to perform the
required operation (i.e. encap/inline).

This patch removes the initialization of the IPv6 header payload length
from bpf_push_seg6_encap(), as it is now handled properly by
seg6_do_srh_{encap,inline}() to prevent corruption of the skb checksum.

Fixes: fe94cc290f53 ("bpf: Add IPv6 Segment Routing helpers")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors

[ Upstream commit f048880fc77058d864aff5c674af7918b30f312a ]

The SRv6 End.B6 and End.B6.Encaps behaviors rely on functions
seg6_do_srh_{encap,inline}() to, respectively: i) encapsulate the
packet within an outer IPv6 header with the specified Segment Routing
Header (SRH); ii) insert the specified SRH directly after the IPv6
header of the packet.

This patch removes the initialization of the IPv6 header payload length
from the input_action_end_b6{_encap}() functions, as it is now handled
properly by seg6_do_srh_{encap,inline}() to avoid corruption of the skb
checksum.

Fixes: 140f04c33bbc ("ipv6: sr: implement several seg6local actions")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

seg6: fix skb checksum evaluation in SRH encapsulation/insertion

[ Upstream commit df8386d13ea280d55beee1b95f61a59234a3798b ]

Support for SRH encapsulation and insertion was introduced with
commit 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and
injection with lwtunnels"), through the seg6_do_srh_encap() and
seg6_do_srh_inline() functions, respectively.
The former encapsulates the packet in an outer IPv6 header along with
the SRH, while the latter inserts the SRH between the IPv6 header and
the payload. Then, the headers are initialized/updated according to the
operating mode (i.e., encap/inline).
Finally, the skb checksum is calculated to reflect the changes applied
to the headers.

The IPv6 payload length ('payload_len') is not initialized
within seg6_do_srh_{inline,encap}() but is deferred in seg6_do_srh(), i.e.
the caller of seg6_do_srh_{inline,encap}().
However, this operation invalidates the skb checksum, since the
'payload_len' is updated only after the checksum is evaluated.

To solve this issue, the initialization of the IPv6 payload length is
moved from seg6_do_srh() directly into the seg6_do_srh_{inline,encap}()
functions and before the skb checksum update takes place.

Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/all/20220705190727.69d532417be7438b15404ee1@uniroma2.it
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: switch netfs read ops to use rreq->inode instead of rreq->mapping->host

[ Upstream commit a25cedb4313d35e1f2968105678a47ca28e84d3b ]

One fewer pointer dereference, and in the future we may not be able to
count on the mapping pointer being populated (e.g. in the DIO case).

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: fix use after free when disabling sriov

[ Upstream commit ebe41da5d47ac0fff877e57bd14c54dccf168827 ]

Use after free is detected by kfence when disabling sriov. What was read
after being freed was vf->pci_dev: it was freed from pci_disable_sriov
and later read in efx_ef10_sriov_free_vf_vports, called from
efx_ef10_sriov_free_vf_vswitching.

Set the pointer to NULL at release time to not trying to read it later.

Reproducer and dmesg log (note that kfence doesn't detect it every time):
$ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
$ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs

 BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]

 Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224):
  efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
  efx_ef10_pci_sriov_disable+0x38/0x70 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xfe/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k

 allocated by task 6771 on cpu 10 at 3137.860196s:
  pci_alloc_dev+0x21/0x60
  pci_iov_add_virtfn+0x2a2/0x320
  sriov_enable+0x212/0x3e0
  efx_ef10_sriov_configure+0x67/0x80 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xba/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 freed by task 6771 on cpu 12 at 3170.991309s:
  device_release+0x34/0x90
  kobject_cleanup+0x3a/0x130
  pci_iov_remove_virtfn+0xd9/0x120
  sriov_disable+0x30/0xe0
  efx_ef10_pci_sriov_disable+0x57/0x70 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xfe/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 3c5eb87605e85 ("sfc: create vports for VFs and assign random MAC addresses")
Reported-by: Yanghang Liu <yanghliu@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220712062642.6915-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: Prevent divide by zero

[ Upstream commit 0638c98c17aa12fe914459c82cd178247e21fb2b ]

divide error: 0000 [#1] SMP PTI
CPU: 3 PID: 78925 Comm: tee Not tainted 5.15.50-1-lts #1
Hardware name: MSI MS-7A59/Z270 SLI PLUS (MS-7A59), BIOS 1.90 01/30/2018
RIP: 0010:smu_v11_0_set_fan_speed_rpm+0x11/0x110 [amdgpu]

Speed is user-configurable through a file.
I accidentally set it to zero, and the driver crashed.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Yefim Barashkin <mr.b34r@kolabnow.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Only use depth 36 bpp linebuffers on DCN display engines.

[ Upstream commit add61d3c31de6a4b5e11a2ab96aaf4c873481568 ]

Various DCE versions had trouble with 36 bpp lb depth, requiring fixes,
last time in commit 353ca0fa5630 ("drm/amd/display: Fix 10bit 4K display
on CIK GPUs") for DCE-8. So far >= DCE-11.2 was considered ok, but now I
found out that on DCE-11.2 it causes dithering when there shouldn't be
any, so identity pixel passthrough with identity gamma LUTs doesn't work
when it should. This breaks various important neuroscience applications,
as reported to me by scientific users of Polaris cards under Ubuntu 22.04
with Linux 5.15, and confirmed by testing it myself on DCE-11.2.

Lets only use depth 36 for DCN engines, where my testing showed that it
is both necessary for high color precision output, e.g., RGBA16 fb's,
and not harmful, as far as more than one year in real-world use showed.

DCE engines seem to work fine for high precision output at 30 bpp, so
this ("famous last words") depth 30 should hopefully fix all known problems
without introducing new ones.

Successfully retested on DCE-11.2 Polaris and DCN-1.0 Raven Ridge on
top of Linux 5.19.0-rc2 + drm-next.

Fixes: 353ca0fa5630 ("drm/amd/display: Fix 10bit 4K display on CIK GPUs")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: stable@vger.kernel.org # 5.14.0
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: Fix potential memory leak in ima_init_crypto()

[ Upstream commit 067d2521874135267e681c19d42761c601d503d6 ]

On failure to allocate the SHA1 tfm, IMA fails to initialize and exits
without freeing the ima_algo_array. Add the missing kfree() for
ima_algo_array to avoid the potential memory leak.

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Fixes: 6d94809af6b0 ("ima: Allocate and initialize tfm for each PCR bank")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: force signature verification when CONFIG_KEXEC_SIG is configured

[ Upstream commit af16df54b89dee72df253abc5e7b5e8a6d16c11c ]

Currently, an unsigned kernel could be kexec'ed when IMA arch specific
policy is configured unless lockdown is enabled. Enforce kernel
signature verification check in the kexec_file_load syscall when IMA
arch specific policy is configured.

Fixes: 99d5cadfde2b ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE")
Reported-and-suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: fix leaks in probe

[ Upstream commit 23aa6d5088e3bd65de77c5c307237b9937f8b48a ]

These two error paths should clean up before returning.

Fixes: 2bb4b98b60d7 ("net: stmmac: Add Ingenic SoCs MAC support.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ftgmac100: Hold reference returned by of_get_child_by_name()

[ Upstream commit 49b9f431ff0d845a36be0b3ede35ec324f2e5fee ]

In ftgmac100_probe(), we should hold the refernece returned by
of_get_child_by_name() and use it to call of_node_put() for
reference balance.

Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nexthop: Fix data-races around nexthop_compat_mode.

[ Upstream commit bdf00bf24bef9be1ca641a6390fd5487873e0d2e ]

While reading nexthop_compat_mode, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 4f80116d3df3 ("net: ipv4: add sysctl for nexthop api compatibility mode")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv4: Fix data-races around sysctl_ip_dynaddr.

[ Upstream commit e49e4aff7ec19b2d0d0957ee30e93dade57dab9e ]

While reading sysctl_ip_dynaddr, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Fix a data-race around sysctl_tcp_ecn_fallback.

[ Upstream commit 12b8d9ca7e678abc48195294494f1815b555d658 ]

While reading sysctl_tcp_ecn_fallback, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 492135557dc0 ("tcp: add rfc3168, section 6.1.1.1. fallback")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

raw: Fix a data-race around sysctl_raw_l3mdev_accept.

[ Upstream commit 1dace014928e6e385363032d359a04dee9158af0 ]

While reading sysctl_raw_l3mdev_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 6897445fb194 ("net: provide a sysctl raw_l3mdev_accept for raw socket lookup with VRFs")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

icmp: Fix a data-race around sysctl_icmp_ratemask.

[ Upstream commit 1ebcb25ad6fc3d50fca87350acf451b9a66dd31e ]

While reading sysctl_icmp_ratemask, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

icmp: Fix a data-race around sysctl_icmp_ratelimit.

[ Upstream commit 2a4eb714841f288cf51c7d942d98af6a8c6e4b01 ]

While reading sysctl_icmp_ratelimit, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

icmp: Fix a data-race around sysctl_icmp_errors_use_inbound_ifaddr.

[ Upstream commit d2efabce81db7eed1c98fa1a3f203f0edd738ac3 ]

While reading sysctl_icmp_errors_use_inbound_ifaddr, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: 1c2fb7f93cb2 ("[IPV4]: Sysctl configurable icmp error source address.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

icmp: Fix a data-race around sysctl_icmp_ignore_bogus_error_responses.

[ Upstream commit b04f9b7e85c7d7aecbada620e8759a662af068d3 ]

While reading sysctl_icmp_ignore_bogus_error_responses, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

icmp: Fix data-races around sysctl_icmp_echo_enable_probe.

[ Upstream commit 4a2f7083cc6cb72dade9a63699ca352fad26d1cd ]

While reading sysctl_icmp_echo_enable_probe, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: d329ea5bd884 ("icmp: add response to RFC 8335 PROBE messages")
Fixes: 1fd07f33c3ea ("ipv6: ICMPV6: add response to ICMPV6 RFC 8335 PROBE messages")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sysctl: Fix data-races in proc_dointvec_ms_jiffies().

[ Upstream commit 7d1025e559782b58824b36cb8ad547a69f2e4b31 ]

A sysctl variable is accessed concurrently, and there is always a chance
of data-race.  So, all readers and writers need some basic protection to
avoid load/store-tearing.

This patch changes proc_dointvec_ms_jiffies() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side.  For now,
proc_dointvec_ms_jiffies() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sysctl: Fix data-races in proc_dou8vec_minmax().

[ Upstream commit 7dee5d7747a69aa2be41f04c6a7ecfe3ac8cdf18 ]

A sysctl variable is accessed concurrently, and there is always a chance
of data-race.  So, all readers and writers need some basic protection to
avoid load/store-tearing.

This patch changes proc_dou8vec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side.  For now,
proc_dou8vec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.

Fixes: cb9444130662 ("sysctl: add proc_dou8vec_minmax()")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix bnxt_refclk_read()

[ Upstream commit ddde5412fdaa5048bbca31529d46cb8da882870c ]

The upper 32-bit PHC register is not latched when reading the lower
32-bit PHC register.  Current code leaves a small window where we may
not read correct higher order bits if the lower order bits are just about
to wrap around.

This patch fixes this by reading higher order bits twice and makes
sure that final value is correctly paired with its lower 32 bits.

Fixes: 30e96f487f64 ("bnxt_en: Do not read the PTP PHC during chip reset")
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix bnxt_reinit_after_abort() code path

[ Upstream commit 4279414bff8af9898e8c53ae6c5bc17f68ad67b7 ]

bnxt_reinit_after_abort() is called during ifup when a previous
FW reset sequence has aborted or a previous ifup has failed after
detecting FW reset.  In all cases, it is safe to assume that a
previous FW reset has completed and the driver may not have fully
reinitialized.

Prior to this patch, it is assumed that the
FUNC_DRV_IF_CHANGE_RESP_FLAGS_HOT_FW_RESET_DONE flag will always be
set by the firmware in bnxt_hwrm_if_change().  This may not be true if
the driver has already attempted to register with the firmware.  The
firmware may not set the RESET_DONE flag again after the driver has
registered, assuming that the driver has seen the flag already.

Fix it to always go through the FW reset initialization path if
the BNXT_STATE_FW_RESET_DET flag is set.  This flag is always set
by the driver after successfully going through bnxt_reinit_after_abort().

Fixes: 6882c36cf82e ("bnxt_en: attempt to reinitialize after aborted reset")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Require the vm mutex for i915_vma_bind()

[ Upstream commit c2ea703dcafccf18d7d77d8b68fb08c2d9842b7a ]

Protect updates of struct i915_vma flags and async binding / unbinding
with the vm::mutex. This means that i915_vma_bind() needs to assert
vm::mutex held. In order to make that possible drop the caching of
kmap_atomic() maps around i915_vma_bind().

An alternative would be to use kmap_local() but since we block cpu
unplugging during sleeps inside kmap_local() sections this may have
unwanted side-effects. Particularly since we might wait for gpu while
holding the vm mutex.

This change may theoretically increase execbuf cpu-usage on snb, but
at least on non-highmem systems that increase should be very small.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211221200050.436316-5-thomas.hellstrom@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/uc: correctly track uc_fw init failure

[ Upstream commit 35d4efec103e1afde968cfc9305f00f9aceb19cc ]

The FAILURE state of uc_fw currently implies that the fw is loadable
(i.e init completed), so we can't use it for init failures and instead
need a dedicated error code.

Note that this currently does not cause any issues because if we fail to
init any of the firmwares we abort the load, but better be accurate
anyway in case things change in the future.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211211000756.1698923-2-daniele.ceraolospurio@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/gt: Serialize TLB invalidates with GT resets

[ Upstream commit a1c5a7bf79c1faa5633b918b5c0666545e84c4d1 ]

Avoid trying to invalidate the TLB in the middle of performing an
engine reset, as this may result in the reset timing out. Currently,
the TLB invalidate is only serialised by its own mutex, forgoing the
uncore lock, but we can take the uncore->lock as well to serialise
the mmio access, thereby serialising with the GDRST.

Tested on a NUC5i7RYB, BIOS RYBDWi35.86A.0380.2019.0517.1530 with
i915 selftest/hangcheck.

Cc: stable@vger.kernel.org # v4.4 and upper
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Reported-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e59a7c45dd919a530256b9ac721ac6ea86c0677.1657639152.git.mchehab@kernel.org
(cherry picked from commit 33da97894758737895e90c909f16786052680ef4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/gt: Serialize GRDOM access between multiple engine resets

[ Upstream commit b24dcf1dc507f69ed3b5c66c2b6a0209ae80d4d4 ]

Don't allow two engines to be reset in parallel, as they would both
try to select a reset bit (and send requests to common registers)
and wait on that register, at the same time. Serialize control of
the reset requests/acks using the uncore->lock, which will also ensure
that no other GT state changes at the same time as the actual reset.

Cc: stable@vger.kernel.org # v4.4 and upper
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e0a2d894e77aed7c2e36b0d1abdc7dbac3011729.1657639152.git.mchehab@kernel.org
(cherry picked from commit 336561a914fc0c6f1218228718f633b31b7af1c3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/dg2: Add Wa_22011100796

[ Upstream commit 154cfae6158141b18d65abb0db679bb51a8294e7 ]

Whenever Full soft reset is required, reset all individual engines
first, and then do a full soft reset.

Signed-off-by: Bruce Chang <yu.bruce.chang@intel.com>
cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128185209.18077-5-ramalingam.c@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/selftests: fix a couple IS_ERR() vs NULL tests

[ Upstream commit 896dcabd1f8f613c533d948df17408c41f8929f5 ]

The shmem_pin_map() function doesn't return error pointers, it returns
NULL.

Fixes: be1cb55a07bf ("drm/i915/gt: Keep a no-frills swappable copy of the default context state")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708094104.GL2316@kadam
(cherry picked from commit d50f5a109cf4ed50c5b575c1bb5fc3bd17b23308)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Fix sleeping while atomic in kdb ftdump

[ Upstream commit 495fcec8648cdfb483b5b9ab310f3839f07cb3b8 ]

If you drop into kdb and type "ftdump" you'll get a sleeping while
atomic warning from memory allocation in trace_find_next_entry().

This appears to have been caused by commit ff895103a84a ("tracing:
Save off entry when peeking at next entry"), which added the
allocation in that path. The problematic commit was already fixed by
commit 8e99cf91b99b ("tracing: Do not allocate buffer in
trace_find_next_entry() in atomic") but that fix missed the kdb case.

The fix here is easy: just move the assignment of the static buffer to
the place where it should have been to begin with:
trace_init_global_iter(). That function is called in two places, once
is right before the assignment of the static buffer added by the
previous fix and once is in kdb.

Note that it appears that there's a second static buffer that we need
to assign that was added in commit efbbdaa22bb7 ("tracing: Show real
address for trace event arguments"), so we'll move that too.

Link: https://lkml.kernel.org/r/20220708170919.1.I75844e5038d9425add2ad853a608cb44bb39df40@changeid
Fixes: ff895103a84a ("tracing: Save off entry when peeking at next entry")
Fixes: efbbdaa22bb7 ("tracing: Show real address for trace event arguments")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lockd: fix nlm_close_files

[ Upstream commit 1197eb5906a5464dbaea24cac296dfc38499cc00 ]

This loop condition tries a bit too hard to be clever. Just test for
the two indices we care about explicitly.

Cc: J. Bruce Fields <bfields@fieldses.org>
Fixes: 7f024fcd5c97 ("Keep read and write fds with each nlm_file")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lockd: set fl_owner when unlocking files

[ Upstream commit aec158242b87a43d83322e99bc71ab4428e5ab79 ]

Unlocking a POSIX lock on an inode with vfs_lock_file only works if
the owner matches. Ensure we set it in the request.

Cc: J. Bruce Fields <bfields@fieldses.org>
Fixes: 7f024fcd5c97 ("Keep read and write fds with each nlm_file")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/gntdev: Ignore failure to unmap INVALID_GRANT_HANDLE

[ Upstream commit 166d3863231667c4f64dee72b77d1102cdfad11f ]

The error paths of gntdev_mmap() can call unmap_grant_pages() even
though not all of the pages have been successfully mapped.  This will
trigger the WARN_ON()s in __unmap_grant_pages_done().  The number of
warnings can be very large; I have observed thousands of lines of
warnings in the systemd journal.

Avoid this problem by only warning on unmapping failure if the handle
being unmapped is not INVALID_GRANT_HANDLE.  The handle field of any
page that was not successfully mapped will be INVALID_GRANT_HANDLE, so
this catches all cases where unmapping can legitimately fail.

Fixes: dbe97cff7dd9 ("xen/gntdev: Avoid blocking in unmap_grant_pages()")
Cc: stable@vger.kernel.org
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220710230522.1563-1-demi@invisiblethingslab.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/gvt: IS_ERR() vs NULL bug in intel_gvt_update_reg_whitelist()

[ Upstream commit e87197fbd137c888fd6c871c72fe7e89445dd015 ]

The shmem_pin_map() function returns NULL, it doesn't return error
pointers.

Fixes: 97ea656521c8 ("drm/i915/gvt: Parse default state to update reg whitelist")
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/Ysftoia2BPUyqVcD@kili
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: replace BUG_ON by element length check

[ Upstream commit c39ba4de6b0a843bec5d46c2b6f2064428dada5e ]

BUG_ON can be triggered from userspace with an element with a large
userdata area. Replace it by length check and return EINVAL instead.
Over time extensions have been growing in size.

Pick a sufficiently old Fixes: tag to propagate this fix.

Fixes: 7d7402642eaf ("netfilter: nf_tables: variable sized set element keys / data")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_log: incorrect offset to network header

[ Upstream commit 7a847c00eeba9744353ecdfad253143b9115678a ]

NFPROTO_ARP is expecting to find the ARP header at the network offset.

In the particular case of ARP, HTYPE= field shows the initial bytes of
the ethernet header destination MAC address.

 netdev out: IN= OUT=bridge0 MACSRC=c2:76:e5:71:e1:de MACDST=36:b0:4a:e2:72:ea MACPROTO=0806 ARP HTYPE=14000 PTYPE=0x4ae2 OPCODE=49782

NFPROTO_NETDEV egress hook is also expecting to find the IP headers at
the network offset.

Fixes: 35b9395104d5 ("netfilter: add generic ARP packet logger")
Reported-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot

[ Upstream commit 8bd582ae9a71d7f14c4e0c735b2eacaf7516d626 ]

Add spin-table enable-method and cpu-release-addr properties for
cpu0 node. This is required by all ARMv8 SoC. Otherwise some
bootloader like u-boot can not update cpu-release-addr and linux
fails to start up secondary cpus.

Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC

[ Upstream commit b4a544e415e9be33b37d9bfa9d9f9f4d13f553d6 ]

The cpu mask value in interrupt property inherits from bcm4908.dtsi
which sets to four cpus. Correct the value to two cpus for dual core
BCM4906 SoC.

Fixes: c8b404fb05dc ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero

[ Upstream commit 884b66976a7279ee889ba885fe364244d50b79e7 ]

The device tree should include generic "jedec,spi-nor" compatible, and a
manufacturer-specific one.
The macronix part is what is shipped on the boards that come with a
flash chip.

Fixes: 45857ae95478 ("ARM: dts: orange-pi-zero: add node for SPI NOR")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708174529.3360-1-msuchanek@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: at91: sama5d2: Fix typo in i2s1 node

[ Upstream commit 2fdf15b50a46e366740df4cccbe2343269b4ff55 ]

Fix typo in i2s1 causing errors in dt binding validation.
Change assigned-parrents to assigned-clock-parents
to match i2s0 node formatting.

Fixes: 1ca81883c557 ("ARM: dts: at91: sama5d2: add nodes for I2S controllers")
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
[claudiu.beznea: use imperative addressing in commit description, remove
 blank line after fixes tag, fix typo in commit message]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220707215812.193008-1-Ryan.Wanner@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv4: Fix a data-race around sysctl_fib_sync_mem.

[ Upstream commit 73318c4b7dbd0e781aaababff17376b2894745c0 ]

While reading sysctl_fib_sync_mem, it can be changed concurrently.
So, we need to add READ_ONCE() to avoid a data-race.

Fixes: 9ab948a91b2c ("ipv4: Allow amount of dirty memory from fib resizing to be controllable")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

icmp: Fix data-races around sysctl.

[ Upstream commit 48d7ee321ea5182c6a70782aa186422a70e67e22 ]

While reading icmp sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.

Fixes: 4cdf507d5452 ("icmp: add a global rate limitation")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cipso: Fix data-races around sysctl.

[ Upstream commit dd44f04b9214adb68ef5684ae87a81ba03632250 ]

While reading cipso sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.

Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix data-races around sysctl_mem.

[ Upstream commit 310731e2f1611d1d13aae237abcf8e66d33345d5 ]

While reading .sysctl_mem, it can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

inetpeer: Fix data-races around sysctl.

[ Upstream commit 3d32edf1f3c38d3301f6434e56316f293466d7fb ]

While reading inetpeer sysctl variables, they can be changed
concurrently.  So, we need to add READ_ONCE() to avoid data-races.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Fix a data-race around sysctl_tcp_max_orphans.

[ Upstream commit 47e6ab24e8c6e3ca10ceb5835413f401f90de4bf ]

While reading sysctl_tcp_max_orphans, it can be changed concurrently.
So, we need to add READ_ONCE() to avoid a data-race.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sysctl: Fix data races in proc_dointvec_jiffies().

[ Upstream commit e877820877663fbae8cb9582ea597a7230b94df3 ]

A sysctl variable is accessed concurrently, and there is always a chance
of data-race.  So, all readers and writers need some basic protection to
avoid load/store-tearing.

This patch changes proc_dointvec_jiffies() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side.  For now,
proc_dointvec_jiffies() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sysctl: Fix data races in proc_doulongvec_minmax().

[ Upstream commit c31bcc8fb89fc2812663900589c6325ba35d9a65 ]

A sysctl variable is accessed concurrently, and there is always a chance
of data-race.  So, all readers and writers need some basic protection to
avoid load/store-tearing.

This patch changes proc_doulongvec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side.  For now,
proc_doulongvec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sysctl: Fix data races in proc_douintvec_minmax().

[ Upstream commit 2d3b559df3ed39258737789aae2ae7973d205bc1 ]

A sysctl variable is accessed concurrently, and there is always a chance
of data-race.  So, all readers and writers need some basic protection to
avoid load/store-tearing.

This patch changes proc_douintvec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side.  For now,
proc_douintvec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.

Fixes: 61d9b56a8920 ("sysctl: add unsigned int range support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sysctl: Fix data races in proc_dointvec_minmax().

[ Upstream commit f613d86d014b6375a4085901de39406598121e35 ]

A sysctl variable is accessed concurrently, and there is always a chance
of data-race.  So, all readers and writers need some basic protection to
avoid load/store-tearing.

This patch changes proc_dointvec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side.  For now,
proc_dointvec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sysctl: Fix data races in proc_douintvec().

[ Upstream commit 4762b532ec9539755aab61445d5da6e1926ccb99 ]

A sysctl variable is accessed concurrently, and there is always a chance
of data-race.  So, all readers and writers need some basic protection to
avoid load/store-tearing.

This patch changes proc_douintvec() to use READ_ONCE() and WRITE_ONCE()
internally to fix data-races on the sysctl side.  For now, proc_douintvec()
itself is tolerant to a data-race, but we still need to add annotations on
the other subsystem's side.

Fixes: e7d316a02f68 ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sysctl: Fix data races in proc_dointvec().

[ Upstream commit 1f1be04b4d48a2475ea1aab46a99221bfc5c0968 ]

A sysctl variable is accessed concurrently, and there is always a chance
of data-race.  So, all readers and writers need some basic protection to
avoid load/store-tearing.

This patch changes proc_dointvec() to use READ_ONCE() and WRITE_ONCE()
internally to fix data-races on the sysctl side.  For now, proc_dointvec()
itself is tolerant to a data-race, but we still need to add annotations on
the other subsystem's side.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ti: am65-cpsw: Fix devlink port register sequence

[ Upstream commit 0680e20af5fbf41df8a11b11bd9a7c25b2ca0746 ]

Renaming interfaces using udevd depends on the interface being registered
before its netdev is registered. Otherwise, udevd reads an empty
phys_port_name value, resulting in the interface not being renamed.

Fix this by registering the interface before registering its netdev
by invoking am65_cpsw_nuss_register_devlink() before invoking
register_netdev() for the interface.

Move the function call to devlink_port_type_eth_set(), invoking it after
register_netdev() is invoked, to ensure that netlink notification for the
port state change is generated after the netdev is completely initialized.

Fixes: 58356eb31d60 ("net: ti: am65-cpsw-nuss: Add devlink support")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20220706070208.12207-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: dwc-qos: Disable split header for Tegra194

[ Upstream commit 029c1c2059e9c4b38f97a06204cdecd10cfbeb8a ]

There is a long-standing issue with the Synopsys DWC Ethernet driver
for Tegra194 where random system crashes have been observed [0]. The
problem occurs when the split header feature is enabled in the stmmac
driver. In the bad case, a larger than expected buffer length is
received and causes the calculation of the total buffer length to
overflow. This results in a very large buffer length that causes the
kernel to crash. Why this larger buffer length is received is not clear,
however, the feedback from the NVIDIA design team is that the split
header feature is not supported for Tegra194. Therefore, disable split
header support for Tegra194 to prevent these random crashes from
occurring.

[0] https://lore.kernel.org/linux-tegra/b0b17697-f23e-8fa5-3757-604a86f3a095@nvidia.com/

Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20220706083913.13750-1-jonathanh@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: Skylake: Correct the handling of fmt_config flexible array

[ Upstream commit fc976f5629afb4160ee77798b14a693eac903ffd ]

The struct nhlt_format's fmt_config is a flexible array, it must not be
used as normal array.
When moving to the next nhlt_fmt_cfg we need to take into account the data
behind the ->config.caps (indicated by ->config.size).

The logic of the code also changed: it is no longer saves the _last_
fmt_cfg for all found rates.

Fixes: bc2bd45b1f7f3 ("ASoC: Intel: Skylake: Parse nhlt and register clock device")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220630065638.11183-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks()

[ Upstream commit 219af251bd1694bce1f627d238347d2eaf13de61 ]

The present flag is only set once when one rate has been found to be saved.
This will effectively going to ignore any rate discovered at later time and
based on the code, this is not the intention.

Fixes: bc2bd45b1f7f3 ("ASoC: Intel: Skylake: Parse nhlt and register clock device")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220630065638.11183-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tas2764: Fix amp gain register offset & default

[ Upstream commit 1c4f29ec878bbf1cc0a1eb54ae7da5ff98e19641 ]

The register default is 0x28 per the datasheet, and the amp gain field
is supposed to be shifted left by one. With the wrong default, the ALSA
controls lie about the power-up state. With the wrong shift, we get only
half the gain we expect.

Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tas2764: Correct playback volume range

[ Upstream commit 3e99e5697e1f7120b5abc755e8a560b22612d6ed ]

DVC value 0xc8 is -100dB and 0xc9 is mute; this needs to map to
-100.5dB as far as the dB scale is concerned. Fix that and enable
the mute flag, so alsamixer correctly shows the control as
<0 dB .. -100 dB, mute>.

Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tas2764: Fix and extend FSYNC polarity handling

[ Upstream commit d1a10f1b48202e2d183cce144c218a211e98d906 ]

Fix setting of FSYNC polarity in case of LEFT_J and DSP_A/B formats.
Do NOT set the SCFG field as was previously done, because that is not
correct and is also in conflict with the "ASI1 Source" control which
sets the same SCFG field!

Also add support for explicit polarity inversion.

Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tas2764: Add post reset delays

[ Upstream commit cd10bb89b0d57bca98eb75e0444854a1c129a14e ]

Make sure there is at least 1 ms delay from reset to first command as
is specified in the datasheet. This is a fix similar to commit
307f31452078 ("ASoC: tas2770: Insert post reset delay").

Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: sgtl5000: Fix noise on shutdown/remove

[ Upstream commit 040e3360af3736348112d29425bf5d0be5b93115 ]

Put the SGTL5000 in a silent/safe state on shutdown/remove, this is
required since the SGTL5000 produces a constant noise on its output
after it is configured and its clock is removed. Without this change
this is happening every time the module is unbound/removed or from
reboot till the clock is enabled again.

The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can
be easily reproduced everywhere just playing something on the codec and
after that removing/unbinding the driver.

Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220624101301.441314-1-francesco.dolcini@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: Fix a potential integer overflow in ima_appraise_measurement

[ Upstream commit d2ee2cfc4aa85ff6a2a3b198a3a524ec54e3d999 ]

When the ima-modsig is enabled, the rc passed to evm_verifyxattr() may be
negative, which may cause the integer overflow problem.

Fixes: 39b07096364a ("ima: Implement support for module-style appended signatures")
Signed-off-by: Huaxin Lu <luhuaxin1@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()

[ Upstream commit 85144df9ff4652816448369de76897c57cbb1b93 ]

If drm_connector_init fails, intel_connector_free will be called to take
care of proper free. So it is necessary to drop the refcount of port
before intel_connector_free.

Fixes: 091a4f91942a ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624130406.17996-1-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit cea9ed611e85d36a05db52b6457bf584b7d969e2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Ring the TX doorbell on DMA errors

[ Upstream commit 5b759bf2f9d73db05369aef2344502095c4e5e73 ]

TX doorbells may be postponed, because sometimes the driver knows that
another packet follows (for example, when xmit_more is true, or when a
MPWQE session is closed before transmitting a packet).

However, the DMA mapping may fail for the next packet, in which case a
new WQE is not posted, the doorbell isn't updated either, and the
transmission of the previous packet will be delayed indefinitely.

This commit fixes the described rare error flow by posting a NOP and
ringing the doorbell on errors to flush all the previous packets. The
MPWQE session is closed before that. DMA mapping in the MPWQE flow is
moved to the beginning of mlx5e_sq_xmit_mpwqe, because empty sessions
are not allowed. Stop room always has enough space for a NOP, because
the actual TX WQE is not posted.

Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix capability check for updating vnic env counters

[ Upstream commit 452133dd580811f184e76b1402983182ee425298 ]

The existing capability check for vnic env counters only checks for
receive steering discards, although we need the counters update for the
exposed internal queue oob counter as well. This could result in the
latter counter not being updated correctly when the receive steering
discards counter is not supported.
Fix that by checking whether any counter is supported instead of only
the steering counter capability.

Fixes: 0cfafd4b4ddf ("net/mlx5e: Add device out of buffer counter")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix enabling sriov while tc nic rules are offloaded

[ Upstream commit 0c9d876545a56aebed30fa306d0460a4d28d271a ]

There is a total of four 4M entries flow tables. In sriov disabled
mode, ct, ct_nat and post_act take three of them. When adding the
first tc nic rule in this mode, it will take another 4M table
for the tc <chain,prio> table. If user then enables sriov, the legacy
flow table tries to take another 4M and fails, and so enablement fails.

To fix that, have legacy fdb take the next available maximum
size from the fs ft pool.

Fixes: 4a98544d1827 ("net/mlx5: Move chains ft pool to be used by all firmware steering")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: kTLS, Fix build time constant test in RX

[ Upstream commit 2ec6cf9b742a5c18982861322fa5de6510f8f57e ]

Use the correct constant (TLS_DRIVER_STATE_SIZE_RX) in the comparison
against the size of the private RX TLS driver context.

Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: kTLS, Fix build time constant test in TX

[ Upstream commit 6cc2714e85754a621219693ea8aa3077d6fca0cb ]

Use the correct constant (TLS_DRIVER_STATE_SIZE_TX) in the comparison
against the size of the private TX TLS driver context.

Fixes: df8d866770f9 ("net/mlx5e: kTLS, Use kernel API to extract private offload context")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9210/1: Mark the FDT_FIXED sections as shareable

[ Upstream commit 598f0a99fa8a35be44b27106b43ddc66417af3b1 ]

commit 7a1be318f579 ("ARM: 9012/1: move device tree mapping out of linear
region") use FDT_FIXED_BASE to map the whole FDT_FIXED_SIZE memory area
which contains fdt. But it only reserves the exact physical memory that
fdt occupied. Unfortunately, this mapping is non-shareable. An illegal or
speculative read access can bring the RAM content from non-fdt zone into
cache, PIPT makes it to be hit by subsequently read access through
shareable mapping(such as linear mapping), and the cache consistency
between cores is lost due to non-shareable property.

|<---------FDT_FIXED_SIZE------>|
|                               |
 -------------------------------
| <non-fdt> | <fdt> | <non-fdt> |
 -------------------------------

1. CoreA read <non-fdt> through MT_ROM mapping, the old data is loaded
   into the cache.
2. CoreB write <non-fdt> to update data through linear mapping. CoreA
   received the notification to invalid the corresponding cachelines, but
   the property non-shareable makes it to be ignored.
3. CoreA read <non-fdt> through linear mapping, cache hit, the old data
   is read.

To eliminate this risk, add a new memory type MT_MEMORY_RO. Compared to
MT_ROM, it is shareable and non-executable.

Here's an example:
  list_del corruption. prev->next should be c0ecbf74, but was c08410dc
  kernel BUG at lib/list_debug.c:53!
  ... ...
  PC is at __list_del_entry_valid+0x58/0x98
  LR is at __list_del_entry_valid+0x58/0x98
  psr: 60000093
  sp : c0ecbf30  ip : 00000000  fp : 00000001
  r10: c08410d0  r9 : 00000001  r8 : c0825e0c
  r7 : 20000013  r6 : c08410d0  r5 : c0ecbf74  r4 : c0ecbf74
  r3 : c0825d08  r2 : 00000000  r1 : df7ce6f4  r0 : 00000044
  ... ...
  Stack: (0xc0ecbf30 to 0xc0ecc000)
  bf20:                                     c0ecbf74 c0164fd0 c0ecbf70 c0165170
  bf40: c0eca000 c0840c00 c0840c00 c0824500 c0825e0c c0189bbc c088f404 60000013
  bf60: 60000013 c0e85100 000004ec 00000000 c0ebcdc0 c0ecbf74 c0ecbf74 c0825d08
  ... ...                                           <  next     prev  >
  (__list_del_entry_valid) from (__list_del_entry+0xc/0x20)
  (__list_del_entry) from (finish_swait+0x60/0x7c)
  (finish_swait) from (rcu_gp_kthread+0x560/0xa20)
  (rcu_gp_kthread) from (kthread+0x14c/0x15c)
  (kthread) from (ret_from_fork+0x14/0x24)

The faulty list node to be deleted is a local variable, its address is
c0ecbf74. The dumped stack shows that 'prev' = c0ecbf74, but its value
before lib/list_debug.c:53 is c08410dc. A large amount of printing results
in swapping out the cacheline containing the old data(MT_ROM mapping is
read only, so the cacheline cannot be dirty), and the subsequent dump
operation obtains new data from the DDR.

Fixes: 7a1be318f579 ("ARM: 9012/1: move device tree mapping out of linear region")
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle

[ Upstream commit 0609e200246bfd3b7516091c491bec4308349055 ]

Jon reports that the Spectre-BHB init code is filling up the kernel log
with spurious notifications about which mitigation has been enabled,
every time any CPU comes out of a low power state.

Given that Spectre-BHB mitigations are system wide, only a single
mitigation can be enabled, and we already print an error if two types of
CPUs coexist in a single system that require different Spectre-BHB
mitigations.

This means that the pr_info() that describes the selected mitigation
does not need to be emitted for each CPU anyway, and so we can simply
emit it only once.

In order to clarify the above in the log message, update it to describe
that the selected mitigation will be enabled on all CPUs, including ones
that are unaffected. If another CPU comes up later that is affected and
requires a different mitigation, we report an error as before.

Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: amd: Limit max transfer and message size

[ Upstream commit 6ece49c56965544262523dae4a071ace3db63507 ]

Enabling the SPI CS35L41 audio codec driver for Steam Deck [1]
revealed a problem with the current AMD SPI controller driver
implementation, consisting of an unrecoverable system hang.

The issue can be prevented if we ensure the max transfer size
and the max message size do not exceed the FIFO buffer size.

According to the implementation of the downstream driver, the
AMD SPI controller is not able to handle more than 70 bytes per
transfer, which corresponds to the size of the FIFO buffer.

Hence, let's fix this by setting the SPI limits mentioned above.

[1] https://lore.kernel.org/r/20220621213819.262537-1-cristian.ciocaltea@collabora.com

Reported-by: Anastasios Vacharakis <vacharakis@o2mail.de>
Fixes: bbb336f39efc ("spi: spi-amd: Add AMD SPI controller driver support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20220706100626.1234731-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count

[ Upstream commit e95ea0f687e679fcb0a3a67d0755b81ee7d60db0 ]

Device-tree incorrectly used "ngpio" which caused the driver to
fallback to 32 ngpios.

This platform has 62 GPIO registers.

Fixes: 9ff8e9fccef9 ("ARM: dts: TS-7970: add basic device tree")
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reset: Fix devm bulk optional exclusive control getter

[ Upstream commit a57f68ddc8865d59a19783080cc52fb4a11dc209 ]

Most likely due to copy-paste mistake the device managed version of the
denoted reset control getter has been implemented with invalid semantic,
which can be immediately spotted by having "WARN_ON(shared && acquired)"
warning in the system log as soon as the method is called. Anyway let's
fix it by altering the boolean arguments passed to the
__devm_reset_control_bulk_get() method from
- shared = true, optional = false, acquired = true
to
+ shared = false, optional = true, acquired = true
That's what they were supposed to be in the first place (see the non-devm
version of the same method: reset_control_bulk_get_optional_exclusive()).

Fixes: 48d71395896d ("reset: Add reset_control_bulk API")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220624141853.7417-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: drop async cache flushes from CIL commits.

[ Upstream commit 919edbadebe17a67193533f531c2920c03e40fa4 ]

Jan Kara reported a performance regression in dbench that he
bisected down to commit bad77c375e8d ("xfs: CIL checkpoint
flushes caches unconditionally").

Whilst developing the journal flush/fua optimisations this cache was
part of, it appeared to made a significant difference to
performance. However, now that this patchset has settled and all the
correctness issues fixed, there does not appear to be any
significant performance benefit to asynchronous cache flushes.

In fact, the opposite is true on some storage types and workloads,
where additional cache flushes that can occur from fsync heavy
workloads have measurable and significant impact on overall
throughput.

Local dbench testing shows little difference on dbench runs with
sync vs async cache flushes on either fast or slow SSD storage, and
no difference in streaming concurrent async transaction workloads
like fs-mark.

Fast NVME storage.

>From `dbench -t 30`, CIL scale:

clients async sync
BW Latency BW Latency
1  935.18   0.855  915.64   0.903
8 2404.51   6.873 2341.77   6.511
16 3003.42   6.460 2931.57   6.529
32 3697.23   7.939 3596.28   7.894
128 7237.43  15.495 7217.74  11.588
512 5079.24  90.587 5167.08  95.822

fsmark, 32 threads, create w/ 64 byte xattr w/32k logbsize

create chown unlink
async   1m41s 1m16s 2m03s
sync 1m40s 1m19s 1m54s

Slower SATA SSD storage:

>From `dbench -t 30`, CIL scale:

clients async sync
BW Latency BW Latency
1   78.59  15.792   83.78  10.729
8  367.88  92.067  404.63  59.943
16  564.51  72.524  602.71  76.089
32  831.66 105.984  870.26 110.482
128 1659.76 102.969 1624.73  91.356
512 2135.91 223.054 2603.07 161.160

fsmark, 16 threads, create w/32k logbsize

create unlink
async   5m06s 4m15s
sync 5m00s 4m22s

And on Jan's test machine:

                   5.18-rc8-vanilla       5.18-rc8-patched
Amean     1        71.22 (   0.00%)       64.94 *   8.81%*
Amean     2        93.03 (   0.00%)       84.80 *   8.85%*
Amean     4       150.54 (   0.00%)      137.51 *   8.66%*
Amean     8       252.53 (   0.00%)      242.24 *   4.08%*
Amean     16      454.13 (   0.00%)      439.08 *   3.31%*
Amean     32      835.24 (   0.00%)      829.74 *   0.66%*
Amean     64     1740.59 (   0.00%)     1686.73 *   3.09%*

Performance and cache flush behaviour is restored to pre-regression
levels.

As such, we can now consider the async cache flush mechanism an
unnecessary exercise in premature optimisation and hence we can
now remove it and the infrastructure it requires completely.

Fixes: bad77c375e8d ("xfs: CIL checkpoint flushes caches unconditionally")
Reported-and-tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: run callbacks before waking waiters in xlog_state_shutdown_callbacks

[ Upstream commit cd6f79d1fb324968a3bae92f82eeb7d28ca1fd22 ]

Brian reported a null pointer dereference failure during unmount in
xfs/006. He tracked the problem down to the AIL being torn down
before a log shutdown had completed and removed all the items from
the AIL. The failure occurred in this path while unmount was
proceeding in another task:

 xfs_trans_ail_delete+0x102/0x130 [xfs]
 xfs_buf_item_done+0x22/0x30 [xfs]
 xfs_buf_ioend+0x73/0x4d0 [xfs]
 xfs_trans_committed_bulk+0x17e/0x2f0 [xfs]
 xlog_cil_committed+0x2a9/0x300 [xfs]
 xlog_cil_process_committed+0x69/0x80 [xfs]
 xlog_state_shutdown_callbacks+0xce/0xf0 [xfs]
 xlog_force_shutdown+0xdf/0x150 [xfs]
 xfs_do_force_shutdown+0x5f/0x150 [xfs]
 xlog_ioend_work+0x71/0x80 [xfs]
 process_one_work+0x1c5/0x390
 worker_thread+0x30/0x350
 kthread+0xd7/0x100
 ret_from_fork+0x1f/0x30

This is processing an EIO error to a log write, and it's
triggering a force shutdown. This causes the log to be shut down,
and then it is running attached iclog callbacks from the shutdown
context. That means the fs and log has already been marked as
xfs_is_shutdown/xlog_is_shutdown and so high level code will abort
(e.g. xfs_trans_commit(), xfs_log_force(), etc) with an error
because of shutdown.

The umount would have been blocked waiting for a log force
completion inside xfs_log_cover() -> xfs_sync_sb(). The first thing
for this situation to occur is for xfs_sync_sb() to exit without
waiting for the iclog buffer to be comitted to disk. The
above trace is the completion routine for the iclog buffer, and
it is shutting down the filesystem.

xlog_state_shutdown_callbacks() does this:

{
        struct xlog_in_core     *iclog;
        LIST_HEAD(cb_list);

        spin_lock(&log->l_icloglock);
        iclog = log->l_iclog;
        do {
                if (atomic_read(&iclog->ic_refcnt)) {
                        /* Reference holder will re-run iclog callbacks. */
                        continue;
                }
                list_splice_init(&iclog->ic_callbacks, &cb_list);
>>>>>>           wake_up_all(&iclog->ic_write_wait);
>>>>>>           wake_up_all(&iclog->ic_force_wait);
        } while ((iclog = iclog->ic_next) != log->l_iclog);

        wake_up_all(&log->l_flush_wait);
        spin_unlock(&log->l_icloglock);

>>>>>>  xlog_cil_process_committed(&cb_list);
}

This wakes any thread waiting on IO completion of the iclog (in this
case the umount log force) before shutdown processes all the pending
callbacks.  That means the xfs_sync_sb() waiting on a sync
transaction in xfs_log_force() on iclog->ic_force_wait will get
woken before the callbacks attached to that iclog are run. This
results in xfs_sync_sb() returning an error, and so unmount unblocks
and continues to run whilst the log shutdown is still in progress.

Normally this is just fine because the force waiter has nothing to
do with AIL operations. But in the case of this unmount path, the
log force waiter goes on to tear down the AIL because the log is now
shut down and so nothing ever blocks it again from the wait point in
xfs_log_cover().

Hence it's a race to see who gets to the AIL first - the unmount
code or xlog_cil_process_committed() killing the superblock buffer.

To fix this, we just have to change the order of processing in
xlog_state_shutdown_callbacks() to run the callbacks before it wakes
any task waiting on completion of the iclog.

Reported-by: Brian Foster <bfoster@redhat.com>
Fixes: aad7272a9208 ("xfs: separate out log shutdown callback processing")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: don't include bnobt blocks when reserving free block pool

[ Upstream commit c8c568259772751a14e969b7230990508de73d9d ]

xfs_reserve_blocks controls the size of the user-visible free space
reserve pool.  Given the difference between the current and requested
pool sizes, it will try to reserve free space from fdblocks.  However,
the amount requested from fdblocks is also constrained by the amount of
space that we think xfs_mod_fdblocks will give us.  If we forget to
subtract m_allocbt_blks before calling xfs_mod_fdblocks, it will will
return ENOSPC and we'll hang the kernel at mount due to the infinite
loop.

In commit fd43cf600cf6, we decided that xfs_mod_fdblocks should not hand
out the "free space" used by the free space btrees, because some portion
of the free space btrees hold in reserve space for future btree
expansion.  Unfortunately, xfs_reserve_blocks' estimation of the number
of blocks that it could request from xfs_mod_fdblocks was not updated to
include m_allocbt_blks, so if space is extremely low, the caller hangs.

Fix this by creating a function to estimate the number of blocks that
can be reserved from fdblocks, which needs to exclude the set-aside and
m_allocbt_blks.

Found by running xfs/306 (which formats a single-AG 20MB filesystem)
with an fstests configuration that specifies a 1k blocksize and a
specially crafted log size that will consume 7/8 of the space (17920
blocks, specifically) in that AG.

Cc: Brian Foster <bfoster@redhat.com>
Fixes: fd43cf600cf6 ("xfs: set aside allocation btree blocks from block reservation")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: only run COW extent recovery when there are no live extents

[ Upstream commit 7993f1a431bc5271369d359941485a9340658ac3 ]

As part of multiple customer escalations due to file data corruption
after copy on write operations, I wrote some fstests that use fsstress
to hammer on COW to shake things loose.  Regrettably, I caught some
filesystem shutdowns due to incorrect rmap operations with the following
loop:

mount <filesystem> # (0)
fsstress <run only readonly ops> & # (1)
while true; do
fsstress <run all ops>
mount -o remount,ro # (2)
fsstress <run only readonly ops>
mount -o remount,rw # (3)
done

When (2) happens, notice that (1) is still running.  xfs_remount_ro will
call xfs_blockgc_stop to walk the inode cache to free all the COW
extents, but the blockgc mechanism races with (1)'s reader threads to
take IOLOCKs and loses, which means that it doesn't clean them all out.
Call such a file (A).

When (3) happens, xfs_remount_rw calls xfs_reflink_recover_cow, which
walks the ondisk refcount btree and frees any COW extent that it finds.
This function does not check the inode cache, which means that incore
COW forks of inode (A) is now inconsistent with the ondisk metadata.  If
one of those former COW extents are allocated and mapped into another
file (B) and someone triggers a COW to the stale reservation in (A), A's
dirty data will be written into (B) and once that's done, those blocks
will be transferred to (A)'s data fork without bumping the refcount.

The results are catastrophic -- file (B) and the refcount btree are now
corrupt.  In the first patch, we fixed the race condition in (2) so that
(A) will always flush the COW fork.  In this second patch, we move the
_recover_cow call to the initial mount call in (0) for safety.

As mentioned previously, xfs_reflink_recover_cow walks the refcount
btree looking for COW staging extents, and frees them.  This was
intended to be run at mount time (when we know there are no live inodes)
to clean up any leftover staging events that may have been left behind
during an unclean shutdown.  As a time "optimization" for readonly
mounts, we deferred this to the ro->rw transition, not realizing that
any failure to clean all COW forks during a rw->ro transition would
result in catastrophic corruption.

Therefore, remove this optimization and only run the recovery routine
when we're guaranteed not to have any COW staging extents anywhere,
which means we always run this at mount time.  While we're at it, move
the callsite to xfs_log_mount_finish because any refcount btree
expansion (however unlikely given that we're removing records from the
right side of the index) must be fed by a per-AG reservation, which
doesn't exist in its current location.

Fixes: 174edb0e46e5 ("xfs: store in-progress CoW allocations in the refcount btree")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "evm: Fix memleak in init_desc"

commit 51dd64bb99e4478fc5280171acd8e1b529eadaf7 upstream.

This reverts commit ccf11dbaa07b328fa469415c362d33459c140a37.

Commit ccf11dbaa07b ("evm: Fix memleak in init_desc") said there is
memleak in init_desc. That may be incorrect, as we can see, tmp_tfm is
saved in one of the two global variables hmac_tfm or evm_tfm[hash_algo],
then if init_desc is called next time, there is no need to alloc tfm
again, so in the error path of kmalloc desc or crypto_shash_init(desc),
It is not a problem without freeing tmp_tfm.

And also that commit did not reset the global variable to NULL after
freeing tmp_tfm and this makes *tfm a dangling pointer which may cause a
UAF issue.

Reported-by: Guozihua (Scott) <guozihua@huawei.com>
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: convert nommu io{re,un}map() to static inline functions

commit d684e0a52d36f8939eda30a0f31ee235ee4ee741 upstream.

Recently, nommu iounmap() was converted from a static inline function to a
macro again, basically reverting commit 4580ba4ad2e6b8dd ("sh: Convert
iounmap() macros to inline functions").  With -Werror, this leads to build
failures like:

    drivers/iio/adc/xilinx-ams.c: In function `ams_iounmap_ps':
    drivers/iio/adc/xilinx-ams.c:1195:14: error: unused variable `ams' [-Werror=unused-variable]
     1195 |  struct ams *ams = data;
  |              ^~~

Fix this by replacing the macros for ioremap() and iounmap() by static
inline functions, based on <asm-generic/io.h>.

Link: https://lkml.kernel.org/r/8d1b1766260961799b04035e7bc39a7f59729f72.1655708312.git.geert+renesas@glider.be
Fixes: 13f1fc870dd74713 ("sh: move the ioremap implementation out of line")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: fix incorrect masking of permission flags for symlinks

commit 5924e6ec1585445f251ea92713eb15beb732622a upstream.

The permission flags of newly created symlinks are wrongly dropped on
nilfs2 with the current umask value even though symlinks should have 777
(rwxrwxrwx) permissions:

 $ umask
 0022
 $ touch file && ln -s file symlink; ls -l file symlink
 -rw-r--r--. 1 root root 0 Jun 23 16:29 file
 lrwxr-xr-x. 1 root root 4 Jun 23 16:29 symlink -> file

This fixes the bug by inserting a missing check that excludes
symlinks.

Link: https://lkml.kernel.org/r/1655974441-5612-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: Tommy Pettersson <ptp@lysator.liu.se>
Reported-by: Ciprian Craciun <ciprian.craciun@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/remap: constrain dedupe of EOF blocks

commit 5750676b64a561f7ec920d7c6ba130fc9c7378f3 upstream.

If dedupe of an EOF block is not constrainted to match against only
other EOF blocks with the same EOF offset into the block, it can
match against any other block that has the same matching initial
bytes in it, even if the bytes beyond EOF in the source file do
not match.

Fix this by constraining the EOF block matching to only match
against other EOF blocks that have identical EOF offsets and data.
This allows "whole file dedupe" to continue to work without allowing
eof blocks to randomly match against partial full blocks with the
same data.

Reported-by: Ansgar Lößer <ansgar.loesser@tu-darmstadt.de>
Fixes: 1383a7ed6749 ("vfs: check file ranges before cloning files")
Link: https://lore.kernel.org/linux-fsdevel/a7c93559-4ba1-df2f-7a85-55a143696405@tu-darmstadt.de/
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Fix shrinker list corruption by madvise IOCTL

commit 9fc33eaaa979d112d10fea729edcd2a2e21aa912 upstream.

Calling madvise IOCTL twice on BO causes memory shrinker list corruption
and crashes kernel because BO is already on the list and it's added to
the list again, while BO should be removed from the list before it's
re-added. Fix it.

Cc: stable@vger.kernel.org
Fixes: 013b65101315 ("drm/panfrost: Add madvise and shrinker support")
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630200601.1884120-3-dmitry.osipenko@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Put mapping instead of shmem obj on panfrost_mmu_map_fault_addr() error

commit fb6e0637ab7ebd8e61fe24f4d663c4bae99cfa62 upstream.

When panfrost_mmu_map_fault_addr() fails, the BO's mapping should be
unreferenced and not the shmem object which backs the mapping.

Cc: stable@vger.kernel.org
Fixes: bdefca2d8dc0 ("drm/panfrost: Add the panfrost_gem_mapping concept")
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630200601.1884120-2-dmitry.osipenko@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: return -EAGAIN for NOWAIT dio reads/writes on compressed and inline extents

commit a4527e1853f8ff6e0b7c2dadad6268bd38427a31 upstream.

When doing a direct IO read or write, we always return -ENOTBLK when we
find a compressed extent (or an inline extent) so that we fallback to
buffered IO. This however is not ideal in case we are in a NOWAIT context
(io_uring for example), because buffered IO can block and we currently
have no support for NOWAIT semantics for buffered IO, so if we need to
fallback to buffered IO we should first signal the caller that we may
need to block by returning -EAGAIN instead.

This behaviour can also result in short reads being returned to user
space, which although it's not incorrect and user space should be able
to deal with partial reads, it's somewhat surprising and even some popular
applications like QEMU (Link tag #1) and MariaDB (Link tag #2) don't
deal with short reads properly (or at all).

The short read case happens when we try to read from a range that has a
non-compressed and non-inline extent followed by a compressed extent.
After having read the first extent, when we find the compressed extent we
return -ENOTBLK from btrfs_dio_iomap_begin(), which results in iomap to
treat the request as a short read, returning 0 (success) and waiting for
previously submitted bios to complete (this happens at
fs/iomap/direct-io.c:__iomap_dio_rw()). After that, and while at
btrfs_file_read_iter(), we call filemap_read() to use buffered IO to
read the remaining data, and pass it the number of bytes we were able to
read with direct IO. Than at filemap_read() if we get a page fault error
when accessing the read buffer, we return a partial read instead of an
-EFAULT error, because the number of bytes previously read is greater
than zero.

So fix this by returning -EAGAIN for NOWAIT direct IO when we find a
compressed or an inline extent.

Reported-by: Dominique MARTINET <dominique.martinet@atmark-techno.com>
Link: https://lore.kernel.org/linux-btrfs/YrrFGO4A1jS0GI0G@atmark-techno.com/
Link: https://jira.mariadb.org/browse/MDEV-27900?focusedCommentId=216582&page=com.atlassian.jira.plugin.system.issuetabpanels%3Acomment-tabpanel#comment-216582
Tested-by: Dominique MARTINET <dominique.martinet@atmark-techno.com>
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: Use separate src/dst nodes when preloading css_sets for migration

commit 07fd5b6cdf3cc30bfde8fe0f644771688be04447 upstream.

Each cset (css_set) is pinned by its tasks. When we're moving tasks around
across csets for a migration, we need to hold the source and destination
csets to ensure that they don't go away while we're moving tasks about. This
is done by linking cset->mg_preload_node on either the
mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the
same cset->mg_preload_node for both the src and dst lists was deemed okay as
a cset can't be both the source and destination at the same time.

Unfortunately, this overloading becomes problematic when multiple tasks are
involved in a migration and some of them are identity noop migrations while
others are actually moving across cgroups. For example, this can happen with
the following sequence on cgroup1:

 #1> mkdir -p /sys/fs/cgroup/misc/a/b
 #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs
 #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS &
 #4> PID=$!
 #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks
 #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs

the process including the group leader back into a. In this final migration,
non-leader threads would be doing identity migration while the group leader
is doing an actual one.

After #3, let's say the whole process was in cset A, and that after #4, the
leader moves to cset B. Then, during #6, the following happens:

 1. cgroup_migrate_add_src() is called on B for the leader.

 2. cgroup_migrate_add_src() is called on A for the other threads.

 3. cgroup_migrate_prepare_dst() is called. It scans the src list.

 4. It notices that B wants to migrate to A, so it tries to A to the dst
    list but realizes that its ->mg_preload_node is already busy.

 5. and then it notices A wants to migrate to A as it's an identity
    migration, it culls it by list_del_init()'ing its ->mg_preload_node and
    putting references accordingly.

 6. The rest of migration takes place with B on the src list but nothing on
    the dst list.

This means that A isn't held while migration is in progress. If all tasks
leave A before the migration finishes and the incoming task pins it, the
cset will be destroyed leading to use-after-free.

This is caused by overloading cset->mg_preload_node for both src and dst
preload lists. We wanted to exclude the cset from the src list but ended up
inadvertently excluding it from the dst list too.

This patch fixes the issue by separating out cset->mg_preload_node into
->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst
preloadings don't interfere with each other.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reported-by: shisiyuan <shisiyuan19870131@gmail.com>
Link: http://lkml.kernel.org/r/1654187688-27411-1-git-send-email-shisiyuan@xiaomi.com
Link: https://www.spinics.net/lists/cgroups/msg33313.html
Fixes: f817de98513d ("cgroup: prepare migration path for unified hierarchy")
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mac80211: fix queue selection for mesh/OCB interfaces

commit 50e2ab39291947b6c6c7025cf01707c270fcde59 upstream.

When using iTXQ, the code assumes that there is only one vif queue for
broadcast packets, using the BE queue. Allowing non-BE queue marking
violates that assumption and txq->ac == skb_queue_mapping is no longer
guaranteed. This can cause issues with queue handling in the driver and
also causes issues with the recent ATF change, resulting in an AQL
underflow warning.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220702145227.39356-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction

commit e5c46fde75e43c15a29b40e5fc5641727f97ae47 upstream.

After emulating a misaligned load or store issued in Thumb mode, we have
to advance the IT state by hand, or it will get out of sync with the
actual instruction stream, which means we'll end up applying the wrong
condition code to subsequent instructions. This might corrupt the
program state rather catastrophically.

So borrow the it_advance() helper from the probing code, and use it on
CPSR if the emulated instruction is Thumb.

Cc: <stable@vger.kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>