drm/mediatek: set DMA max segment size

[ Upstream commit 070955558e820b9a89c570b91b1f21762f62b288 ]

This driver requires imported PRIME buffers to appear contiguously in
its IO address space. Make sure this is the case by setting the maximum
DMA segment size to a more suitable value than the default 64KB.

Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: use correct device to import PRIME buffers

[ Upstream commit 4c6f3196e6ea111c456c6086dc3f57d4706b0b2d ]

PRIME buffers should be imported using the DMA device. To this end, use
a custom import function that mimics drm_gem_prime_import_dev(), but
passes the correct device.

Fixes: 119f5173628aa ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_flow_offload: skip tcp rst and fin packets

[ Upstream commit dfe42be15fde16232340b8b2a57c359f51cc10d9 ]

TCP rst and fin packets do not qualify to place a flow into the
flowtable. Most likely there will be no more packets after connection
closure. Without this patch, this flow entry expires and connection
tracking picks up the entry in ESTABLISHED state using the fixup
timeout, which makes this look inconsistent to the user for a connection
that is actually already closed.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: Fix build error of function redefinition

[ Upstream commit 68e03b85474a51ec1921b4d13204782594ef7223 ]

when do randbuilding, I got this error:

In file included from drivers/hwmon/pmbus/ucd9000.c:19:0:
./include/linux/gpio/driver.h:576:1: error: redefinition of gpiochip_add_pin_range
 gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
 ^~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/hwmon/pmbus/ucd9000.c:18:0:
./include/linux/gpio.h:245:1: note: previous definition of gpiochip_add_pin_range was here
 gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
 ^~~~~~~~~~~~~~~~~~~~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 964cb341882f ("gpio: move pincontrol calls to <linux/gpio/driver.h>")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190731123814.46624-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmveth: Convert multicast list size for little-endian system

[ Upstream commit 66cf4710b23ab2adda11155684a2c8826f4fe732 ]

The ibm,mac-address-filters property defines the maximum number of
addresses the hypervisor's multicast filter list can support. It is
encoded as a big-endian integer in the OF device tree, but the virtual
ethernet driver does not convert it for use by little-endian systems.
As a result, the driver is not behaving as it should on affected systems
when a large number of multicast addresses are assigned to the device.

Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btqca: Add a short delay before downloading the NVM

[ Upstream commit 8059ba0bd0e4694e51c2ee6438a77b325f06c0d5 ]

On WCN3990 downloading the NVM sometimes fails with a "TLV response
size mismatch" error:

[  174.949955] Bluetooth: btqca.c:qca_download_firmware() hci0: QCA Downloading qca/crnv21.bin
[  174.958718] Bluetooth: btqca.c:qca_tlv_send_segment() hci0: QCA TLV response size mismatch

It seems the controller needs a short time after downloading the
firmware before it is ready for the NVM. A delay as short as 1 ms
seems sufficient, make it 10 ms just in case. No event is received
during the delay, hence we don't just silently drop an extra event.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tc35815: Explicitly check NET_IP_ALIGN is not zero in tc35815_rx

[ Upstream commit 125b7e0949d4e72b15c2b1a1590f8cece985a918 ]

clang warns:

drivers/net/ethernet/toshiba/tc35815.c:1507:30: warning: use of logical
'&&' with constant operand [-Wconstant-logical-operand]
                        if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN)
                                                  ^  ~~~~~~~~~~~~
drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: use '&' for a
bitwise operation
                        if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN)
                                                  ^~
                                                  &
drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: remove constant to
silence this warning
                        if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN)
                                                 ~^~~~~~~~~~~~~~~
1 warning generated.

Explicitly check that NET_IP_ALIGN is not zero, which matches how this
is checked in other parts of the tree. Because NET_IP_ALIGN is a build
time constant, this check will be constant folded away during
optimization.

Fixes: 82a9928db560 ("tc35815: Enable StripCRC feature")
Link: https://github.com/ClangBuiltLinux/linux/issues/608
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hv_netvsc: Fix a warning of suspicious RCU usage

[ Upstream commit 6d0d779dca73cd5acb649c54f81401f93098b298 ]

This fixes a warning of "suspicious rcu_dereference_check() usage"
when nload runs.

Fixes: 776e726bfb34 ("netvsc: fix RCU warning in get_stats")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools: bpftool: fix error message (prog -> object)

[ Upstream commit b3e78adcbf991a4e8b2ebb23c9889e968ec76c5f ]

Change an error message to work for any object being
pinned not just programs.

Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: use-after-free in failing rule with bound set

[ Upstream commit 6a0a8d10a3661a036b55af695542a714c429ab7c ]

If a rule that has already a bound anonymous set fails to be added, the
preparation phase releases the rule and the bound set. However, the
transaction object from the abort path still has a reference to the set
object that is stale, leading to a use-after-free when checking for the
set->bound field. Add a new field to the transaction that specifies if
the set is bound, so the abort path can skip releasing it since the rule
command owns it and it takes care of releasing it. After this update,
the set->bound field is removed.

[   24.649883] Unable to handle kernel paging request at virtual address 0000000000040434
[   24.657858] Mem abort info:
[   24.660686]   ESR = 0x96000004
[   24.663769]   Exception class = DABT (current EL), IL = 32 bits
[   24.669725]   SET = 0, FnV = 0
[   24.672804]   EA = 0, S1PTW = 0
[   24.675975] Data abort info:
[   24.678880]   ISV = 0, ISS = 0x00000004
[   24.682743]   CM = 0, WnR = 0
[   24.685723] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000428952000
[   24.692207] [0000000000040434] pgd=0000000000000000
[   24.697119] Internal error: Oops: 96000004 [#1] SMP
[...]
[   24.889414] Call trace:
[   24.891870]  __nf_tables_abort+0x3f0/0x7a0
[   24.895984]  nf_tables_abort+0x20/0x40
[   24.899750]  nfnetlink_rcv_batch+0x17c/0x588
[   24.904037]  nfnetlink_rcv+0x13c/0x190
[   24.907803]  netlink_unicast+0x18c/0x208
[   24.911742]  netlink_sendmsg+0x1b0/0x350
[   24.915682]  sock_sendmsg+0x4c/0x68
[   24.919185]  ___sys_sendmsg+0x288/0x2c8
[   24.923037]  __sys_sendmsg+0x7c/0xd0
[   24.926628]  __arm64_sys_sendmsg+0x2c/0x38
[   24.930744]  el0_svc_common.constprop.0+0x94/0x158
[   24.935556]  el0_svc_handler+0x34/0x90
[   24.939322]  el0_svc+0x8/0xc
[   24.942216] Code: 37280300 f9404023 91014262 aa1703e0 (f9401863)
[   24.948336] ---[ end trace cebbb9dcbed3b56f ]---

Fixes: f6ac85858976 ("netfilter: nf_tables: unbind set in rule from commit path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tundra: tsi108: use spin_lock_irqsave instead of spin_lock_irq in IRQ context

[ Upstream commit 8c25d0887a8bd0e1ca2074ac0c6dff173787a83b ]

As spin_unlock_irq will enable interrupts.
Function tsi108_stat_carry is called from interrupt handler tsi108_irq.
Interrupts are enabled in interrupt handler.
Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_(un)lock_irq
in IRQ context to avoid this.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: bcm2835aux: fix corruptions for longer spi transfers

[ Upstream commit 73b114ee7db1750c0b535199fae383b109bd61d0 ]

On long running tests with a mcp2517fd can controller it showed that
on rare occations the data read shows corruptions for longer spi transfers.

Example of a 22 byte transfer:

expected (as captured on logic analyzer):
FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 85 86 87 88 89 8a 8b

read by the driver:
FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 88 89 8a 00 00 8b 9b

To fix this use BCM2835_AUX_SPI_STAT_RX_LVL to determine when we may
read data from the fifo reliably without any corruption.

Surprisingly the only values ever empirically read in
BCM2835_AUX_SPI_STAT_RX_LVL are 0x00, 0x10, 0x20 and 0x30.
So whenever the mask is not 0 we can read from the fifo in a safe manner.

The patch has now been tested intensively and we are no longer
able to reproduce the "RX" issue any longer.

Fixes: 1ea29b39f4c812ec ("spi: bcm2835aux: add bcm2835 auxiliary spi device...")
Reported-by: Hubert Denkmair <h.denkmair@intence.de>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: bcm2835aux: remove dangerous uncontrolled read of fifo

[ Upstream commit c7de8500fd8ecbb544846dd5f11dca578c3777e1 ]

This read of the fifo is a potential candidate for a race condition
as the spi transfer is not necessarily finished and so can lead to
an early read of the fifo that still misses data.

So it has been removed.

Fixes: 1ea29b39f4c812ec ("spi: bcm2835aux: add bcm2835 auxiliary spi device...")
Suggested-by: Hubert Denkmair <h.denkmair@intence.de>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: bcm2835aux: unifying code between polling and interrupt driven code

[ Upstream commit 7188a6f0eee3f1fae5d826cfc6d569657ff950ec ]

Sharing more code between polling and interrupt-driven mode.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/boot: Preserve boot_params.secure_boot from sanitizing

commit 29d9a0b50736768f042752070e5cdf4e4d4c00df upstream.

Commit

  a90118c445cc ("x86/boot: Save fields explicitly, zero out everything else")

now zeroes the secure boot setting information (enabled/disabled/...)
passed by the boot loader or by the kernel's EFI handover mechanism.

The problem manifests itself with signed kernels using the EFI handoff
protocol with grub and the kernel loses the information whether secure
boot is enabled in the firmware, i.e., the log message "Secure boot
enabled" becomes "Secure boot could not be determined".

efi_main() arch/x86/boot/compressed/eboot.c sets this field early but it
is subsequently zeroed by the above referenced commit.

Include boot_params.secure_boot in the preserve field list.

 [ bp: restructure commit message and massage. ]

Fixes: a90118c445cc ("x86/boot: Save fields explicitly, zero out everything else")
Signed-off-by: John S. Gruber <JohnSGruber@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: stable <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/CAPotdmSPExAuQcy9iAHqX3js_fc4mMLQOTr5RBGvizyCOPcTQQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/rds: Fix info leak in rds6_inc_info_copy()

[ Upstream commit 7d0a06586b2686ba80c4a2da5f91cb10ffbea736 ]

The rds6_inc_info_copy() function has a couple struct members which
are leaking stack information.  The ->tos field should hold actual
information and the ->flags field needs to be zeroed out.

Fixes: 3eb450367d08 ("rds: add type of service(tos) infrastructure")
Fixes: b7ff8b1036f0 ("rds: Extend RDS API for IPv6 support")
Reported-by: 黄ID蝴蝶 <butterflyhuangxx@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: remove empty skb from write queue in error cases

[ Upstream commit fdfc5c8594c24c5df883583ebd286321a80e0a67 ]

Vladimir Rutsky reported stuck TCP sessions after memory pressure
events. Edge Trigger epoll() user would never receive an EPOLLOUT
notification allowing them to retry a sendmsg().

Jason tested the case of sk_stream_alloc_skb() returning NULL,
but there are other paths that could lead both sendmsg() and sendpage()
to return -1 (EAGAIN), with an empty skb queued on the write queue.

This patch makes sure we remove this empty skb so that
Jason code can detect that the queue is empty, and
call sk->sk_write_space(sk) accordingly.

Fixes: ce5ec440994b ("tcp: ensure epoll edge trigger wakeup when write queue is empty")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Reported-by: Vladimir Rutsky <rutsky@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: inherit timestamp on mtu probe

[ Upstream commit 888a5c53c0d8be6e98bc85b677f179f77a647873 ]

TCP associates tx timestamp requests with a byte in the bytestream.
If merging skbs in tcp_mtu_probe, migrate the tstamp request.

Similar to MSG_EOR, do not allow moving a timestamp from any segment
in the probe but the last. This to avoid merging multiple timestamps.

Tested with the packetdrill script at
https://github.com/wdebruij/packetdrill/commits/mtu_probe-1

Link: http://patchwork.ozlabs.org/patch/1143278/#2232897
Fixes: 4ed2d765dfac ("net-timestamp: TCP timestamping")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac-rk: Don't fail if phy regulator is absent

[ Upstream commit 3b25528e1e355c803e73aa326ce657b5606cda73 ]

The devicetree binding lists the phy phy as optional. As such, the
driver should not bail out if it can't find a regulator. Instead it
should just skip the remaining regulator related code and continue
on normally.

Skip the remainder of phy_power_on() if a regulator supply isn't
available. This also gets rid of the bogus return code.

Fixes: 2e12f536635f ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: fix a NULL pointer deref in ipt action

[ Upstream commit 981471bd3abf4d572097645d765391533aac327d ]

The net pointer in struct xt_tgdtor_param is not explicitly
initialized therefore is still NULL when dereferencing it.
So we have to find a way to pass the correct net pointer to
ipt_destroy_target().

The best way I find is just saving the net pointer inside the per
netns struct tcf_idrinfo, which could make this patch smaller.

Fixes: 0c66dc1ea3f0 ("netfilter: conntrack: register hooks in netns when needed by ruleset")
Reported-and-tested-by: itugrok@yahoo.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: act_sample: fix psample group handling on overwrite

[ Upstream commit dbf47a2a094edf58983265e323ca4bdcdb58b5ee ]

Action sample doesn't properly handle psample_group pointer in overwrite
case. Following issues need to be fixed:

- In tcf_sample_init() function RCU_INIT_POINTER() is used to set
  s->psample_group, even though we neither setting the pointer to NULL, nor
  preventing concurrent readers from accessing the pointer in some way.
  Use rcu_swap_protected() instead to safely reset the pointer.

- Old value of s->psample_group is not released or deallocated in any way,
  which results resource leak. Use psample_group_put() on non-NULL value
  obtained with rcu_swap_protected().

- The function psample_group_put() that released reference to struct
  psample_group pointed by rcu-pointer s->psample_group doesn't respect rcu
  grace period when deallocating it. Extend struct psample_group with rcu
  head and use kfree_rcu when freeing it.

Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix skb use after free in netpoll

[ Upstream commit 2c1644cf6d46a8267d79ed95cb9b563839346562 ]

After commit baeababb5b85d5c4e6c917efe2a1504179438d3b
("tun: return NET_XMIT_DROP for dropped packets"),
when tun_net_xmit drop packets, it will free skb and return NET_XMIT_DROP,
netpoll_send_skb_on_dev will run into following use after free cases:
1. retry netpoll_start_xmit with freed skb;
2. queue freed skb in npinfo->txq.
queue_process will also run into use after free case.

hit netpoll_send_skb_on_dev first case with following kernel log:

[  117.864773] kernel BUG at mm/slub.c:306!
[  117.864773] invalid opcode: 0000 [#1] SMP PTI
[  117.864774] CPU: 3 PID: 2627 Comm: loop_printmsg Kdump: loaded Tainted: P           OE     5.3.0-050300rc5-generic #201908182231
[  117.864775] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  117.864775] RIP: 0010:kmem_cache_free+0x28d/0x2b0
[  117.864781] Call Trace:
[  117.864781]  ? tun_net_xmit+0x21c/0x460
[  117.864781]  kfree_skbmem+0x4e/0x60
[  117.864782]  kfree_skb+0x3a/0xa0
[  117.864782]  tun_net_xmit+0x21c/0x460
[  117.864782]  netpoll_start_xmit+0x11d/0x1b0
[  117.864788]  netpoll_send_skb_on_dev+0x1b8/0x200
[  117.864789]  __br_forward+0x1b9/0x1e0 [bridge]
[  117.864789]  ? skb_clone+0x53/0xd0
[  117.864790]  ? __skb_clone+0x2e/0x120
[  117.864790]  deliver_clone+0x37/0x50 [bridge]
[  117.864790]  maybe_deliver+0x89/0xc0 [bridge]
[  117.864791]  br_flood+0x6c/0x130 [bridge]
[  117.864791]  br_dev_xmit+0x315/0x3c0 [bridge]
[  117.864792]  netpoll_start_xmit+0x11d/0x1b0
[  117.864792]  netpoll_send_skb_on_dev+0x1b8/0x200
[  117.864792]  netpoll_send_udp+0x2c6/0x3e8
[  117.864793]  write_msg+0xd9/0xf0 [netconsole]
[  117.864793]  console_unlock+0x386/0x4e0
[  117.864793]  vprintk_emit+0x17e/0x280
[  117.864794]  vprintk_default+0x29/0x50
[  117.864794]  vprintk_func+0x4c/0xbc
[  117.864794]  printk+0x58/0x6f
[  117.864795]  loop_fun+0x24/0x41 [printmsg_loop]
[  117.864795]  kthread+0x104/0x140
[  117.864795]  ? 0xffffffffc05b1000
[  117.864796]  ? kthread_park+0x80/0x80
[  117.864796]  ret_from_fork+0x35/0x40

Signed-off-by: Feng Sun <loyou85@gmail.com>
Signed-off-by: Xiaojun Zhao <xiaojunzhao141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mld: fix memory leak in mld_del_delrec()

[ Upstream commit a84d016479896b5526a2cc54784e6ffc41c9d6f6 ]

Similar to the fix done for IPv4 in commit e5b1c6c6277d
("igmp: fix memory leak in igmpv3_del_delrec()"), we need to
make sure mca_tomb and mca_sources are not blindly overwritten.

Using swap() then a call to ip6_mc_clear_src() will take care
of the missing free.

BUG: memory leak
unreferenced object 0xffff888117d9db00 (size 64):
  comm "syz-executor247", pid 6918, jiffies 4294943989 (age 25.350s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 fe 88 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000005b463030>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<000000005b463030>] slab_post_alloc_hook mm/slab.h:522 [inline]
    [<000000005b463030>] slab_alloc mm/slab.c:3319 [inline]
    [<000000005b463030>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548
    [<00000000939cbf94>] kmalloc include/linux/slab.h:552 [inline]
    [<00000000939cbf94>] kzalloc include/linux/slab.h:748 [inline]
    [<00000000939cbf94>] ip6_mc_add1_src net/ipv6/mcast.c:2236 [inline]
    [<00000000939cbf94>] ip6_mc_add_src+0x31f/0x420 net/ipv6/mcast.c:2356
    [<00000000d8972221>] ip6_mc_source+0x4a8/0x600 net/ipv6/mcast.c:449
    [<000000002b203d0d>] do_ipv6_setsockopt.isra.0+0x1b92/0x1dd0 net/ipv6/ipv6_sockglue.c:748
    [<000000001f1e2d54>] ipv6_setsockopt+0x89/0xd0 net/ipv6/ipv6_sockglue.c:944
    [<00000000c8f7bdf9>] udpv6_setsockopt+0x4e/0x90 net/ipv6/udp.c:1558
    [<000000005a9a0c5e>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3139
    [<00000000910b37b2>] __sys_setsockopt+0x10f/0x220 net/socket.c:2084
    [<00000000e9108023>] __do_sys_setsockopt net/socket.c:2100 [inline]
    [<00000000e9108023>] __se_sys_setsockopt net/socket.c:2097 [inline]
    [<00000000e9108023>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2097
    [<00000000f4818160>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296
    [<000000008d367e8f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down")
Fixes: 9c8bb163ae78 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.71

Revert "Input: elantech - enable SMBus on new (2018+) systems"

This reverts commit 3d180fe5cd7625b67e0879ffa1f6ae1f09385485 which is
commit 883a2a80f79ca5c0c105605fafabd1f3df99b34c upstream.

This patch depends on an other series:
https://patchwork.kernel.org/project/linux-input/list/?series=122327&state=%2A&archive=both

It was a mistake to backport it in the v5.2 branch, as there
is a high chance we encounter a touchpad that needs the series
above.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=204733
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204771
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.70

Revert "ASoC: Fail card instantiation if DAI format setup fails"

This reverts commit 714a8438fc8ae88aa22c25065e241bce0260db13 which is
commit 40aa5383e393d72f6aa3943a4e7b1aae25a1e43b upstream.

Mark Brown writes:
I nacked this patch when Sasha posted it - it only improves
diagnostics and might make systems that worked by accident break
since it turns things into a hard failure, it won't make
anything that didn't work previously work.

Reported-by: Mark Brown <broonie@kernel.org>
Cc: Ricard Wanderlof <ricardw@axis.com>
Cc: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/lkml/20190904181027.GG4348@sirena.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mt76: mt76x0u: do not reset radio on resume

commit 8f2d163cb26da87e7d8e1677368b8ba1ba4d30b3 upstream.

On some machines mt76x0u firmware can hung during resume,
what result on messages like below:

[  475.480062] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  475.990066] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[  475.990075] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  476.500003] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[  476.500012] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  477.010046] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[  477.010055] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  477.529997] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110
[  477.530006] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  477.824907] mt76x0 1-8:1.0: Error: send MCU cmd failed:-71
[  477.824916] mt76x0 1-8:1.0: Error: MCU response pre-completed!
[  477.825029] usb 1-8: USB disconnect, device number 6

and possible whole system freeze.

This can be avoided, if we do not perform mt76x0_chip_onoff() reset.

Cc: stable@vger.kernel.org
Fixes: 134b2d0d1fcf ("mt76x0: init files")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/ptrace: fix up botched merge of spectrev1 fix

I incorrectly merged commit 31a2fbb390fe ("x86/ptrace: Fix possible
spectre-v1 in ptrace_get_debugreg()") when backporting it, as was
graciously pointed out at
https://grsecurity.net/teardown_of_a_failed_linux_lts_spectre_fix.php

Resolve the upstream difference with the stable kernel merge to properly
protect things.

Reported-by: Brad Spengler <spender@grsecurity.net>
Cc: Dianzhang Chen <dianzhangchen0@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <bp@alien8.de>
Cc: <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: piix4: Fix port selection for AMD Family 16h Model 30h

[ Upstream commit c7c06a1532f3fe106687ac82a13492c6a619ff1c ]

Family 16h Model 30h SMBus controller needs the same port selection fix
as described and fixed in commit 0fe16195f891 ("i2c: piix4: Fix SMBus port
selection for AMD Family 17h chips")

commit 6befa3fde65f ("i2c: piix4: Support alternative port selection
register") also fixed the port selection for Hudson2, but unfortunately
this is not the exact same device and the AMD naming and PCI Device IDs
aren't particularly helpful here.

The SMBus port selection register is common to the following Families
and models, as documented in AMD's publicly available BIOS and Kernel
Developer Guides:

 50742 - Family 15h Model 60h-6Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)
 55072 - Family 15h Model 70h-7Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)
 52740 - Family 16h Model 30h-3Fh (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS)

The Hudson2 PCI Device ID (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) is shared
between Bolton FCH and Family 16h Model 30h, but the location of the
SmBus0Sel port selection bits are different:

 51192 - Bolton Register Reference Guide

We distinguish between Bolton and Family 16h Model 30h using the PCI
Revision ID:

  Bolton is device 0x780b, revision 0x15
  Family 16h Model 30h is device 0x780b, revision 0x1F
  Family 15h Model 60h and 70h are both device 0x790b, revision 0x4A.

The following additional public AMD BKDG documents were checked and do
not share the same port selection register:

 42301 - Family 15h Model 00h-0Fh doesn't mention any
 42300 - Family 15h Model 10h-1Fh doesn't mention any
 49125 - Family 15h Model 30h-3Fh doesn't mention any

 48751 - Family 16h Model 00h-0Fh uses the previously supported
         index register SB800_PIIX4_PORT_IDX_ALT at 0x2e

Signed-off-by: Andrew Cooks <andrew.cooks@opengear.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org [v4.6+]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Ensure O_DIRECT reports an error if the bytes read/written is 0

[ Upstream commit eb2c50da9e256dbbb3ff27694440e4c1900cfef8 ]

If the attempt to resend the I/O results in no bytes being read/written,
we must ensure that we report the error.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fixes: 0a00b77b331a ("nfs: mirroring support for direct io")
Cc: stable@vger.kernel.org # v3.20+
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Pass error information to the pgio error cleanup routine

[ Upstream commit df3accb849607a86278a37c35e6b313635ccc48b ]

Allow the caller to pass error information when cleaning up a failed
I/O request so that we can conditionally take action to cancel the
request altogether if the error turned out to be fatal.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4/pnfs: Fix a page lock leak in nfs_pageio_resend()

[ Upstream commit f4340e9314dbfadc48758945f85fc3b16612d06f ]

If the attempt to resend the pages fails, we need to ensure that we
clean up those pages that were not transmitted.

Fixes: d600ad1f2bdb ("NFS41: pop some layoutget errors to application")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Clean up list moves of struct nfs_page

[ Upstream commit 078b5fd92c4913dd367361db6c28568386077c89 ]

In several places we're just moving the struct nfs_page from one list to
another by first removing from the existing list, then adding to the new
one.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI

[ Upstream commit 82e40f558de566fdee214bec68096bbd5e64a6a4 ]

A guest is not allowed to inject a SGI (or clear its pending state)
by writing to GICD_ISPENDR0 (resp. GICD_ICPENDR0), as these bits are
defined as WI (as per ARM IHI 0048B 4.3.7 and 4.3.8).

Make sure we correctly emulate the architecture.

Fixes: 96b298000db4 ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers")
Cc: stable@vger.kernel.org # 4.7+
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is long

[ Upstream commit d4a8061a7c5f7c27a2dc002ee4cb89b3e6637e44 ]

If the ap_list is longer than 256 entries, merge_final() in list_sort()
will call the comparison callback with the same element twice, causing
a deadlock in vgic_irq_cmp().

Fix it by returning early when irqa == irqb.

Cc: stable@vger.kernel.org # 4.7+
Fixes: 8e4447457965 ("KVM: arm/arm64: vgic-new: Add IRQ sorting")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
[maz: massaged commit log and patch, added Fixes and Cc-stable]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S: Fix incorrect guest-to-user-translation error handling

[ Upstream commit ddfd151f3def9258397fcde7a372205a2d661903 ]

H_PUT_TCE_INDIRECT handlers receive a page with up to 512 TCEs from
a guest. Although we verify correctness of TCEs before we do anything
with the existing tables, there is a small window when a check in
kvmppc_tce_validate might pass and right after that the guest alters
the page of TCEs, causing an early exit from the handler and leaving
srcu_read_lock(&vcpu->kvm->srcu) (virtual mode) or lock_rmap(rmap)
(real mode) locked.

This fixes the bug by jumping to the common exit code with an appropriate
unlock.

Cc: stable@vger.kernel.org # v4.11+
Fixes: 121f80ba68f1 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: Correctly set noencrypt for PAE frames

commit f8b43c5cf4b62a19f2210a0f5367b84e1eff1ab9 upstream.

The noencrypt flag was intended to be set if the "frame was received
unencrypted" according to include/uapi/linux/nl80211.h.  However, the
current behavior is opposite of this.

Cc: stable@vger.kernel.org
Fixes: 018f6fbf540d ("mac80211: Send control port frames over nl80211")
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190827224120.14545-3-denkenz@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: Don't memset RXCB prior to PAE intercept

commit c8a41c6afa27b8c3f61622dfd882b912da9d6721 upstream.

In ieee80211_deliver_skb_to_local_stack intercepts EAPoL frames if
mac80211 is configured to do so and forwards the contents over nl80211.
During this process some additional data is also forwarded, including
whether the frame was received encrypted or not.  Unfortunately just
prior to the call to ieee80211_deliver_skb_to_local_stack, skb->cb is
cleared, resulting in incorrect data being exposed over nl80211.

Fixes: 018f6fbf540d ("mac80211: Send control port frames over nl80211")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190827224120.14545-2-denkenz@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix possible sta leak

commit 5fd2f91ad483baffdbe798f8a08f1b41442d1e24 upstream.

If TDLS station addition is rejected, the sta memory is leaked.
Avoid this by moving the check before the allocation.

Cc: stable@vger.kernel.org
Fixes: 7ed5285396c2 ("mac80211: don't initiate TDLS connection if station is not associated to AP")
Link: https://lore.kernel.org/r/20190801073033.7892-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "cfg80211: fix processing world regdomain when non modular"

commit 0d31d4dbf38412f5b8b11b4511d07b840eebe8cb upstream.

This reverts commit 96cce12ff6e0 ("cfg80211: fix processing world
regdomain when non modular").

Re-triggering a reg_process_hint with the last request on all events,
can make the regulatory domain fail in case of multiple WiFi modules. On
slower boards (espacially with mdev), enumeration of the WiFi modules
can end up in an intersected regulatory domain, and user cannot set it
with 'iw reg set' anymore.

This is happening, because:
- 1st module enumerates, queues up a regulatory request
- request gets processed by __reg_process_hint_driver():
  - checks if previous was set by CORE -> yes
    - checks if regulator domain changed -> yes, from '00' to e.g. 'US'
      -> sends request to the 'crda'
- 2nd module enumerates, queues up a regulator request (which triggers
  the reg_todo() work)
- reg_todo() -> reg_process_pending_hints() sees, that the last request
  is not processed yet, so it tries to process it again.
  __reg_process_hint driver() will run again, and:
  - checks if the last request's initiator was the core -> no, it was
    the driver (1st WiFi module)
  - checks, if the previous initiator was the driver -> yes
    - checks if the regulator domain changed -> yes, it was '00' (set by
      core, and crda call did not return yet), and should be changed to 'US'

------> __reg_process_hint_driver calls an intersect

Besides, the reg_process_hint call with the last request is meaningless
since the crda call has a timeout work. If that timeout expires, the
first module's request will lost.

Cc: stable@vger.kernel.org
Fixes: 96cce12ff6e0 ("cfg80211: fix processing world regdomain when non modular")
Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
Link: https://lore.kernel.org/r/20190614131600.GA13897@a1-hr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccp - Ignore unconfigured CCP device on suspend/resume

commit 5871cd93692c8071fb9358daccb715b5081316ac upstream.

If a CCP is unconfigured (e.g. there are no available queues) then
there will be no data structures allocated for the device. Thus, we
must check for validity of a pointer before trying to access structure
members.

Fixes: 720419f01832f ("crypto: ccp - Introduce the AMD Secure Processor device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VMCI: Release resource if the work is already queued

commit ba03a9bbd17b149c373c0ea44017f35fc2cd0f28 upstream.

Francois reported that VMware balloon gets stuck after a balloon reset,
when the VMCI doorbell is removed. A similar error can occur when the
balloon driver is removed with the following splat:

[ 1088.622000] INFO: task modprobe:3565 blocked for more than 120 seconds.
[ 1088.622035]       Tainted: G        W         5.2.0 #4
[ 1088.622087] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1088.622205] modprobe        D    0  3565   1450 0x00000000
[ 1088.622210] Call Trace:
[ 1088.622246]  __schedule+0x2a8/0x690
[ 1088.622248]  schedule+0x2d/0x90
[ 1088.622250]  schedule_timeout+0x1d3/0x2f0
[ 1088.622252]  wait_for_completion+0xba/0x140
[ 1088.622320]  ? wake_up_q+0x80/0x80
[ 1088.622370]  vmci_resource_remove+0xb9/0xc0 [vmw_vmci]
[ 1088.622373]  vmci_doorbell_destroy+0x9e/0xd0 [vmw_vmci]
[ 1088.622379]  vmballoon_vmci_cleanup+0x6e/0xf0 [vmw_balloon]
[ 1088.622381]  vmballoon_exit+0x18/0xcc8 [vmw_balloon]
[ 1088.622394]  __x64_sys_delete_module+0x146/0x280
[ 1088.622408]  do_syscall_64+0x5a/0x130
[ 1088.622410]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1088.622415] RIP: 0033:0x7f54f62791b7
[ 1088.622421] Code: Bad RIP value.
[ 1088.622421] RSP: 002b:00007fff2a949008 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 1088.622426] RAX: ffffffffffffffda RBX: 000055dff8b55d00 RCX: 00007f54f62791b7
[ 1088.622426] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055dff8b55d68
[ 1088.622427] RBP: 000055dff8b55d00 R08: 00007fff2a947fb1 R09: 0000000000000000
[ 1088.622427] R10: 00007f54f62f5cc0 R11: 0000000000000206 R12: 000055dff8b55d68
[ 1088.622428] R13: 0000000000000001 R14: 000055dff8b55d68 R15: 00007fff2a94a3f0

The cause for the bug is that when the "delayed" doorbell is invoked, it
takes a reference on the doorbell entry and schedules work that is
supposed to run the appropriate code and drop the doorbell entry
reference. The code ignores the fact that if the work is already queued,
it will not be scheduled to run one more time. As a result one of the
references would not be dropped. When the code waits for the reference
to get to zero, during balloon reset or module removal, it gets stuck.

Fix it. Drop the reference if schedule_work() indicates that the work is
already queued.

Note that this bug got more apparent (or apparent at all) due to
commit ce664331b248 ("vmw_balloon: VMCI_DOORBELL_SET does not check status").

Fixes: 83e2ec765be03 ("VMCI: doorbell implementation.")
Reported-by: Francois Rigault <rigault.francois@gmail.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Adit Ranadive <aditr@vmware.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Vishnu DASA <vdasa@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Link: https://lore.kernel.org/r/20190820202638.49003-1-namit@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: hisi_lpc: Add .remove method to avoid driver unbind crash

commit 10e62b47973b0b0ceda076255bcb147b83e20517 upstream.

The original driver author seemed to be under the impression that a driver
cannot be removed if it does not have a .remove method. Or maybe if it is
a built-in platform driver.

This is not true. This crash can be created:

root@ubuntu:/sys/bus/platform/drivers/hisi-lpc# echo HISI0191\:00 > unbind
root@ubuntu:/sys/bus/platform/drivers/hisi-lpc# ipmitool raw 6 1
 Unable to handle kernel paging request at virtual address ffff000010035010
 Mem abort info:
   ESR = 0x96000047
   Exception class = DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000047
   CM = 0, WnR = 1
 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000118b000
 [ffff000010035010] pgd=0000041ffbfff003, pud=0000041ffbffe003, pmd=0000041ffbffd003, pte=0000000000000000
 Internal error: Oops: 96000047 [#1] PREEMPT SMP
 Modules linked in:
 CPU: 17 PID: 1473 Comm: ipmitool Not tainted 5.2.0-rc5-00003-gf68c53b414a3-dirty #198
 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018
 pstate: 20000085 (nzCv daIf -PAN -UAO)
 pc : hisi_lpc_target_in+0x7c/0x120
 lr : hisi_lpc_target_in+0x70/0x120
 sp : ffff00001efe3930
 x29: ffff00001efe3930 x28: ffff841f9f599200
 x27: 0000000000000002 x26: 0000000000000000
 x25: 0000000000000080 x24: 00000000000000e4
 x23: 0000000000000000 x22: 0000000000000064
 x21: ffff801fb667d280 x20: 0000000000000001
 x19: ffff00001efe39ac x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000
 x15: 0000000000000000 x14: 0000000000000000
 x13: 0000000000000000 x12: 0000000000000000
 x11: 0000000000000000 x10: 0000000000000000
 x9 : 0000000000000000 x8 : ffff841febe60340
 x7 : ffff801fb55c52e8 x6 : 0000000000000000
 x5 : 0000000000ffc0e3 x4 : 0000000000000001
 x3 : ffff801fb667d280 x2 : 0000000000000001
 x1 : ffff000010035010 x0 : ffff000010035000
 Call trace:
  hisi_lpc_target_in+0x7c/0x120
  hisi_lpc_comm_in+0x88/0x98
  logic_inb+0x5c/0xb8
  port_inb+0x18/0x20
  bt_event+0x38/0x808
  smi_event_handler+0x4c/0x5a0
  check_start_timer_thread.part.4+0x40/0x58
  sender+0x78/0x88
  smi_send.isra.6+0x94/0x108
  i_ipmi_request+0x2c4/0x8f8
  ipmi_request_settime+0x124/0x160
  handle_send_req+0x19c/0x208
  ipmi_ioctl+0x2c0/0x990
  do_vfs_ioctl+0xb8/0x8f8
  ksys_ioctl+0x80/0xb8
  __arm64_sys_ioctl+0x1c/0x28
  el0_svc_common.constprop.0+0x64/0x160
  el0_svc_handler+0x28/0x78
  el0_svc+0x8/0xc
 Code: 941d1511 aa0003f9 f94006a0 91004001 (b9000034)
 ---[ end trace aa842b86af7069e4 ]---

The problem here is that the host goes away but the associated logical PIO
region remains registered, as do the children devices.

Fix by adding a .remove method to tidy-up by removing the child devices
and unregistering the logical PIO region.

Cc: stable@vger.kernel.org
Fixes: adf38bb0b595 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free

commit 1b15a5632a809ab57d403fd972ca68785363b654 upstream.

If, after registering a logical PIO range, the driver probe later fails,
the logical PIO range memory will be released automatically.

This causes an issue, in that the logical PIO range is not unregistered
and the released range memory may be later referenced.

Fix by unregistering the logical PIO range.

And since we now unregister the logical PIO range for probe failure, avoid
the special ordering of setting logical PIO range ops, which was the
previous (poor) attempt at a safeguard against this.

Cc: stable@vger.kernel.org
Fixes: adf38bb0b595 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Call dma_set_max_seg_size() in i915_driver_hw_probe()

commit 32f0a982650b123bdab36865617d3e03ebcacf3b upstream.

Currently, we don't call dma_set_max_seg_size() for i915 because we
intentionally do not limit the segment length that the device supports.
However, this results in a warning being emitted if we try to map
anything larger than SZ_64K on a kernel with CONFIG_DMA_API_DEBUG_SG
enabled:

[    7.751926] DMA-API: i915 0000:00:02.0: mapping sg segment longer
than device claims to support [len=98304] [max=65536]
[    7.751934] WARNING: CPU: 5 PID: 474 at kernel/dma/debug.c:1220
debug_dma_map_sg+0x20f/0x340

This was originally brought up on
https://bugs.freedesktop.org/show_bug.cgi?id=108517 , and the consensus
there was it wasn't really useful to set a limit (and that dma-debug
isn't really all that useful for i915 in the first place). Unfortunately
though, CONFIG_DMA_API_DEBUG_SG is enabled in the debug configs for
various distro kernels. Since a WARN_ON() will disable automatic problem
reporting (and cause any CI with said option enabled to start
complaining), we really should just fix the problem.

Note that as me and Chris Wilson discussed, the other solution for this
would be to make DMA-API not make such assumptions when a driver hasn't
explicitly set a maximum segment size. But, taking a look at the commit
which originally introduced this behavior, commit 78c47830a5cb
("dma-debug: check scatterlist segments"), there is an explicit mention
of this assumption and how it applies to devices with no segment size:

Conversely, devices which are less limited than the rather
conservative defaults, or indeed have no limitations at all
(e.g. GPUs with their own internal MMU), should be encouraged to
set appropriate dma_parms, as they may get more efficient DMA
mapping performance out of it.

So unless there's any concerns (I'm open to discussion!), let's just
follow suite and call dma_set_max_seg_size() with UINT_MAX as our limit
to silence any warnings.

Changes since v3:
* Drop patch for enabling CONFIG_DMA_API_DEBUG_SG in CI. It looks like
  just turning it on causes the kernel to spit out bogus WARN_ONs()
  during some igt tests which would otherwise require teaching igt to
  disable the various DMA-API debugging options causing this. This is
  too much work to be worth it, since DMA-API debugging is useless for
  us. So, we'll just settle with this single patch to squelch WARN_ONs()
  during driver load for users that have CONFIG_DMA_API_DEBUG_SG turned
  on for some reason.
* Move dma_set_max_seg_size() call into i915_driver_hw_probe() - Chris
  Wilson

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patchwork.freedesktop.org/patch/msgid/20190823205251.14298-1-lyude@redhat.com
(cherry picked from commit acd674af95d3f627062007429b9c195c6b32361d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Don't deballoon unused ggtt drm_mm_node in linux guest

commit 0a3dfbb5cd9033752639ef33e319c2f2863c713a upstream.

The following call trace may exist in linux guest dmesg when guest i915
driver is unloaded.
[   90.776610] [drm:vgt_deballoon_space.isra.0 [i915]] deballoon space: range [0x0 - 0x0] 0 KiB.
[   90.776621] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0
[   90.776691] IP: drm_mm_remove_node+0x4d/0x320 [drm]
[   90.776718] PGD 800000012c7d0067 P4D 800000012c7d0067 PUD 138e4c067 PMD 0
[   90.777091] task: ffff9adab60f2f00 task.stack: ffffaf39c0fe0000
[   90.777142] RIP: 0010:drm_mm_remove_node+0x4d/0x320 [drm]
[   90.777573] Call Trace:
[   90.777653]  intel_vgt_deballoon+0x4c/0x60 [i915]
[   90.777729]  i915_ggtt_cleanup_hw+0x121/0x190 [i915]
[   90.777792]  i915_driver_unload+0x145/0x180 [i915]
[   90.777856]  i915_pci_remove+0x15/0x20 [i915]
[   90.777890]  pci_device_remove+0x3b/0xc0
[   90.777916]  device_release_driver_internal+0x157/0x220
[   90.777945]  driver_detach+0x39/0x70
[   90.777967]  bus_remove_driver+0x51/0xd0
[   90.777990]  pci_unregister_driver+0x23/0x90
[   90.778019]  SyS_delete_module+0x1da/0x240
[   90.778045]  entry_SYSCALL_64_fastpath+0x24/0x87
[   90.778072] RIP: 0033:0x7f34312af067
[   90.778092] RSP: 002b:00007ffdea3da0d8 EFLAGS: 00000206
[   90.778297] RIP: drm_mm_remove_node+0x4d/0x320 [drm] RSP: ffffaf39c0fe3dc0
[   90.778344] ---[ end trace f4b1bc8305fc59dd ]---

Four drm_mm_node are used to reserve guest ggtt space, but some of them
may be skipped and not initialised due to space constraints in
intel_vgt_balloon(). If drm_mm_remove_node() is called with
uninitialized drm_mm_node, the above call trace occurs.

This patch check drm_mm_node's validity before calling
drm_mm_remove_node().

Fixes: ff8f797557c7("drm/i915: return the correct usable aperture size under gvt environment")
Cc: stable@vger.kernel.org
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1566279978-9659-1-git-send-email-xiong.y.zhang@intel.com
(cherry picked from commit 4776f3529d6b1e47f02904ad1d264d25ea22b27b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Add APTX quirk for Dell Latitude 5495

commit 317a3aaef94d73ba6be88aea11b41bb631b2d581 upstream.

Needs ATPX rather than _PR3 to really turn off the dGPU. This can save
~5W when dGPU is runtime-suspended.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib: logic_pio: Add logic_pio_unregister_range()

commit b884e2de2afc68ce30f7093747378ef972dde253 upstream.

Add a function to unregister a logical PIO range.

Logical PIO space can still be leaked when unregistering certain
LOGIC_PIO_CPU_MMIO regions, but this acceptable for now since there are no
callers to unregister LOGIC_PIO_CPU_MMIO regions, and the logical PIO
region allocation scheme would need significant work to improve this.

Cc: stable@vger.kernel.org
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib: logic_pio: Avoid possible overlap for unregistering regions

commit 0a27142bd1ee259e24a0be2b0133e5ca5df8da91 upstream.

The code was originally written to not support unregistering logical PIO
regions.

To accommodate supporting unregistering logical PIO regions, subtly modify
LOGIC_PIO_CPU_MMIO region registration code, such that the "end" of the
registered regions is the "end" of the last region, and not the sum of
the sizes of all the registered regions.

Cc: stable@vger.kernel.org
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib: logic_pio: Fix RCU usage

commit 06709e81c668f5f56c65b806895b278517bd44e0 upstream.

The traversing of io_range_list with list_for_each_entry_rcu()
is not properly protected by rcu_read_lock() and rcu_read_unlock(),
so add them.

These functions mark the critical section scope where the list is
protected for the reader, it cannot be  "reclaimed". Any updater - in
this case, the logical PIO registration functions - cannot update the
list until the reader exits this critical section.

In addition, the list traversing used in logic_pio_register_range()
does not need to use the rcu variant.

This is because we are already using io_range_mutex to guarantee mutual
exclusion from mutating the list.

Cc: stable@vger.kernel.org
Fixes: 031e3601869c ("lib: Add generic PIO mapping method")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsi: scom: Don't abort operations for minor errors

commit 8919dfcb31161fae7d607bbef5247e5e82fd6457 upstream.

The scom driver currently fails out of operations if certain system
errors are flagged in the status register; system checkstop, special
attention, or recoverable error. These errors won't impact the ability
of the scom engine to perform operations, so the driver should continue
under these conditions.
Also, don't do a PIB reset for these conditions, since it won't help.

Fixes: 6b293258cded ("fsi: scom: Major overhaul")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20190827041249.13381-1-jk@ozlabs.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

typec: tcpm: fix a typo in the comparison of pdo_max_voltage

commit a684d8fd87182090ee96e34519ecdf009cef093a upstream.

There appears to be a typo in the comparison of pdo_max_voltage[i]
with the previous value, currently it is checking against the
array pdo_min_voltage rather than pdo_max_voltage. I believe this
is a typo. Fix this.

Addresses-Coverity: ("Copy-paste error")
Fixes: 5007e1b5db73 ("typec: tcpm: Validate source and sink caps")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20190822135212.10195-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: pci: Add Tiger Lake support

commit 9c78255fdde45c6b9a1ee30f652f7b34c727f5c7 upstream.

This adds support for the Trace Hub in Tiger Lake PCH.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: stable@vger.kernel.org # v4.14+
Link: https://lore.kernel.org/r/20190821074955.3925-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: pci: Add support for another Lewisburg PCH

commit 164eb56e3b64f3a816238d410c9efec7567a82ef upstream.

Add support for the Trace Hub in another Lewisburg PCH.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: stable@vger.kernel.org # v4.14+
Link: https://lore.kernel.org/r/20190821074955.3925-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: Fix a double free of stm_source_device

commit 961b6ffe0e2c403b09a8efe4a2e986b3c415391a upstream.

In the error path of stm_source_register_device(), the kfree is
unnecessary, as the put_device() before it ends up calling
stm_source_device_release() to free stm_source_device, leading to
a double free at the outer kfree() call. Remove it.

Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: 7bd1d4093c2fa ("stm class: Introduce an abstraction for System Trace Module devices")
Link: https://lore.kernel.org/linux-arm-kernel/1563354988-23826-1-git-send-email-dingxiang@cmss.chinamobile.com/
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20190821074955.3925-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Fix init of SD cards reporting an invalid VDD range

commit 72741084d903e65e121c27bd29494d941729d4a1 upstream.

The OCR register defines the supported range of VDD voltages for SD cards.
However, it has turned out that some SD cards reports an invalid voltage
range, for example having bit7 set.

When a host supports MMC_CAP2_FULL_PWR_CYCLE and some of the voltages from
the invalid VDD range, this triggers the core to run a power cycle of the
card to try to initialize it at the lowest common supported voltage.
Obviously this fails, since the card can't support it.

Let's fix this problem, by clearing invalid bits from the read OCR register
for SD cards, before proceeding with the VDD voltage negotiation.

Cc: stable@vger.kernel.org
Reported-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Philip Langdale <philipl@overt.org>
Tested-by: Philip Langdale <philipl@overt.org>
Tested-by: Manuel Presnitz <mail@mpy.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-of-at91: add quirk for broken HS200

commit 7871aa60ae0086fe4626abdf5ed13eeddf306c61 upstream.

HS200 is not implemented in the driver, but the controller claims it
through caps. Remove it via a quirk, to make sure the mmc core do not try
to enable HS200, as it causes the eMMC initialization to fail.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: bb5f8ea4d514 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add Tiger Lake point LP device ID

commit 587f17407741a5be07f8a2d1809ec946c8120962 upstream.

Add Tiger Lake Point device ID for TGP LP.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190819103210.32748-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: storage: ums-realtek: Whitelist auto-delink support

commit 1902a01e2bcc3abd7c9a18dc05e78c7ab4a53c54 upstream.

Auto-delink requires writing special registers to ums-realtek devices.
Unconditionally enable auto-delink may break newer devices.

So only enable auto-delink by default for the original three IDs,
0x0138, 0x0158 and 0x0159.

Realtek is working on a patch to properly support auto-delink for other
IDs.

BugLink: https://bugs.launchpad.net/bugs/1838886
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190827173450.13572-2-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: storage: ums-realtek: Update module parameter description for auto_delink_en

commit f6445b6b2f2bb1745080af4a0926049e8bca2617 upstream.

The option named "auto_delink_en" is a bit misleading, as setting it to
false doesn't really disable auto-delink but let auto-delink be firmware
controlled.

Update the description to reflect the real usage of this parameter.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190827173450.13572-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci: rcar: Fix typo in compatible string matching

commit 636bd02a7ba9025ff851d0cfb92768c8fa865859 upstream.

It's spelled "renesas", not "renensas".

Due to this typo, RZ/G1M and RZ/G1N were not covered by the check.

Fixes: 2dc240a3308b ("usb: host: xhci: rcar: retire use of xhci_plat_type_is()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20190827125112.12192-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ohci: fix a race condition between shutdown and irq

commit a349b95d7ca0cea71be4a7dac29830703de7eb62 upstream.

This patch fixes an issue that the following error is
possible to happen when ohci hardware causes an interruption
and the system is shutting down at the same time.

[   34.851754] usb 2-1: USB disconnect, device number 2
[   35.166658] irq 156: nobody cared (try booting with the "irqpoll" option)
[   35.173445] CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 5.3.0-rc5 #85
[   35.179964] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
[   35.187886] Workqueue: usb_hub_wq hub_event
[   35.192063] Call trace:
[   35.194509]  dump_backtrace+0x0/0x150
[   35.198165]  show_stack+0x14/0x20
[   35.201475]  dump_stack+0xa0/0xc4
[   35.204785]  __report_bad_irq+0x34/0xe8
[   35.208614]  note_interrupt+0x2cc/0x318
[   35.212446]  handle_irq_event_percpu+0x5c/0x88
[   35.216883]  handle_irq_event+0x48/0x78
[   35.220712]  handle_fasteoi_irq+0xb4/0x188
[   35.224802]  generic_handle_irq+0x24/0x38
[   35.228804]  __handle_domain_irq+0x5c/0xb0
[   35.232893]  gic_handle_irq+0x58/0xa8
[   35.236548]  el1_irq+0xb8/0x180
[   35.239681]  __do_softirq+0x94/0x23c
[   35.243253]  irq_exit+0xd0/0xd8
[   35.246387]  __handle_domain_irq+0x60/0xb0
[   35.250475]  gic_handle_irq+0x58/0xa8
[   35.254130]  el1_irq+0xb8/0x180
[   35.257268]  kernfs_find_ns+0x5c/0x120
[   35.261010]  kernfs_find_and_get_ns+0x3c/0x60
[   35.265361]  sysfs_unmerge_group+0x20/0x68
[   35.269454]  dpm_sysfs_remove+0x2c/0x68
[   35.273284]  device_del+0x80/0x370
[   35.276683]  hid_destroy_device+0x28/0x60
[   35.280686]  usbhid_disconnect+0x4c/0x80
[   35.284602]  usb_unbind_interface+0x6c/0x268
[   35.288867]  device_release_driver_internal+0xe4/0x1b0
[   35.293998]  device_release_driver+0x14/0x20
[   35.298261]  bus_remove_device+0x110/0x128
[   35.302350]  device_del+0x148/0x370
[   35.305832]  usb_disable_device+0x8c/0x1d0
[   35.309921]  usb_disconnect+0xc8/0x2d0
[   35.313663]  hub_event+0x6e0/0x1128
[   35.317146]  process_one_work+0x1e0/0x320
[   35.321148]  worker_thread+0x40/0x450
[   35.324805]  kthread+0x124/0x128
[   35.328027]  ret_from_fork+0x10/0x18
[   35.331594] handlers:
[   35.333862] [<0000000079300c1d>] usb_hcd_irq
[   35.338126] [<0000000079300c1d>] usb_hcd_irq
[   35.342389] Disabling IRQ #156

ohci_shutdown() disables all the interrupt and rh_state is set to
OHCI_RH_HALTED. In other hand, ohci_irq() is possible to enable
OHCI_INTR_SF and OHCI_INTR_MIE on ohci_irq(). Note that OHCI_INTR_SF
is possible to be set by start_ed_unlink() which is called:
 ohci_irq()
  -> process_done_list()
   -> takeback_td()
    -> start_ed_unlink()

So, ohci_irq() has the following condition, the issue happens by
&ohci->regs->intrenable = OHCI_INTR_MIE | OHCI_INTR_SF and
ohci->rh_state = OHCI_RH_HALTED:

/* interrupt for some other device? */
if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED))
return IRQ_NOTMINE;

To fix the issue, ohci_shutdown() holds the spin lock while disabling
the interruption and changing the rh_state flag to prevent reenable
the OHCI_INTR_MIE unexpectedly. Note that io_watchdog_func() also
calls the ohci_shutdown() and it already held the spin lock, so that
the patch makes a new function as _ohci_shutdown().

This patch is inspired by a Renesas R-Car Gen3 BSP patch
from Tho Vu.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/1566877910-6020-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: udc: don't do hardware access if gadget has stopped

commit cbe85c88ce80fb92956a0793518d415864dcead8 upstream.

After _gadget_stop_activity is executed, we can consider the hardware
operation for gadget has finished, and the udc can be stopped and enter
low power mode. So, any later hardware operations (from usb_ep_ops APIs
or usb_gadget_ops APIs) should be considered invalid, any deinitializatons
has been covered at _gadget_stop_activity.

I meet this problem when I plug out usb cable from PC using mass_storage
gadget, my callstack like: vbus interrupt->.vbus_session->
composite_disconnect ->pm_runtime_put_sync(&_gadget->dev),
the composite_disconnect will call fsg_disable, but fsg_disable calls
usb_ep_disable using async way, there are register accesses for
usb_ep_disable. So sometimes, I get system hang due to visit register
without clock, sometimes not.

The Linux Kernel USB maintainer Alan Stern suggests this kinds of solution.
See: http://marc.info/?l=linux-usb&m=138541769810983&w=2.

Cc: <stable@vger.kernel.org> #v4.9+
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20190820020503.27080-2-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hcd: use managed device resources

commit 76da906ad727048a74bb8067031ee99fc070c7da upstream.

Using managed device resources in usb_hcd_pci_probe() allows devm usage for
resource subranges, such as the mmio resource for the platform device
created to control host/device mode mux, which is a xhci extended
capability, and sits inside the xhci mmio region.

If managed device resources are not used then "parent" resource
is released before subrange at driver removal as .remove callback is
called before the devres list of resources for this device is walked
and released.

This has been observed with the xhci extended capability driver causing a
use-after-free which is now fixed.

An additional nice benefit is that error handling on driver initialisation
is simplified much.

Signed-off-by: Carsten Schmid <carsten_schmid@mentor.com>
Tested-by: Carsten Schmid <carsten_schmid@mentor.com>
Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Fixes: fa31b3cb2ae1 ("xhci: Add Intel extended cap / otg phy mux handling")
Cc: <stable@vger.kernel.org> # v4.19+
Link: https://lore.kernel.org/r/1566569488679.31808@mentor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-wdm: fix race between write and disconnect due to flag abuse

commit 1426bd2c9f7e3126e2678e7469dca9fd9fc6dd3e upstream.

In case of a disconnect an ongoing flush() has to be made fail.
Nevertheless we cannot be sure that any pending URB has already
finished, so although they will never succeed, they still must
not be touched.
The clean solution for this is to check for WDM_IN_USE
and WDM_DISCONNECTED in flush(). There is no point in ever
clearing WDM_IN_USE, as no further writes make sense.

The issue is as old as the driver.

Fixes: afba937e540c9 ("USB: CDC WDM driver")
Reported-by: syzbot+d232cca6ec42c2edb3fc@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190827103436.21143-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb-storage: Add new JMS567 revision to unusual_devs

commit 08d676d1685c2a29e4d0e1b0242324e564d4589e upstream.

Revision 0x0117 suffers from an identical issue to earlier revisions,
therefore it should be added to the quirks list.

Signed-off-by: Henk van der Laan <opensource@henkvdlaan.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190816200847.21366-1-opensource@henkvdlaan.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Check for empty hash and comment the race with registering probes

commit 372e0d01da71c84dcecf7028598a33813b0d5256 upstream.

The race between adding a function probe and reading the probes that exist
is very subtle. It needs a comment. Also, the issue can also happen if the
probe has has the EMPTY_HASH as its func_hash.

Cc: stable@vger.kernel.org
Fixes: 7b60f3d876156 ("ftrace: Dynamically create the probe ftrace_ops for the trace_array")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Check for successful allocation of hash

commit 5b0022dd32b7c2e15edf1827ba80aa1407edf9ff upstream.

In register_ftrace_function_probe(), we are not checking the return
value of alloc_and_copy_ftrace_hash(). The subsequent call to
ftrace_match_records() may end up dereferencing the same. Add a check to
ensure this doesn't happen.

Link: http://lkml.kernel.org/r/26e92574f25ad23e7cafa3cf5f7a819de1832cbe.1562249521.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes: 1ec3a81a0cf42 ("ftrace: Have each function probe use its own ftrace_ops")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Fix NULL pointer dereference in t_probe_next()

commit 7bd46644ea0f6021dc396a39a8bfd3a58f6f1f9f upstream.

LTP testsuite on powerpc results in the below crash:

  Unable to handle kernel paging request for data at address 0x00000000
  Faulting instruction address: 0xc00000000029d800
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE SMP NR_CPUS=2048 NUMA PowerNV
  ...
  CPU: 68 PID: 96584 Comm: cat Kdump: loaded Tainted: G        W
  NIP:  c00000000029d800 LR: c00000000029dac4 CTR: c0000000001e6ad0
  REGS: c0002017fae8ba10 TRAP: 0300   Tainted: G        W
  MSR:  9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR: 28022422  XER: 20040000
  CFAR: c00000000029d90c DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 0
  ...
  NIP [c00000000029d800] t_probe_next+0x60/0x180
  LR [c00000000029dac4] t_mod_start+0x1a4/0x1f0
  Call Trace:
  [c0002017fae8bc90] [c000000000cdbc40] _cond_resched+0x10/0xb0 (unreliable)
  [c0002017fae8bce0] [c0000000002a15b0] t_start+0xf0/0x1c0
  [c0002017fae8bd30] [c0000000004ec2b4] seq_read+0x184/0x640
  [c0002017fae8bdd0] [c0000000004a57bc] sys_read+0x10c/0x300
  [c0002017fae8be30] [c00000000000b388] system_call+0x5c/0x70

The test (ftrace_set_ftrace_filter.sh) is part of ftrace stress tests
and the crash happens when the test does 'cat
$TRACING_PATH/set_ftrace_filter'.

The address points to the second line below, in t_probe_next(), where
filter_hash is dereferenced:
  hash = iter->probe->ops.func_hash->filter_hash;
  size = 1 << hash->size_bits;

This happens due to a race with register_ftrace_function_probe(). A new
ftrace_func_probe is created and added into the func_probes list in
trace_array under ftrace_lock. However, before initializing the filter,
we drop ftrace_lock, and re-acquire it after acquiring regex_lock. If
another process is trying to read set_ftrace_filter, it will be able to
acquire ftrace_lock during this window and it will end up seeing a NULL
filter_hash.

Fix this by just checking for a NULL filter_hash in t_probe_next(). If
the filter_hash is NULL, then this probe is just being added and we can
simply return from here.

Link: http://lkml.kernel.org/r/05e021f757625cbbb006fad41380323dbe4e3b43.1562249521.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes: 7b60f3d876156 ("ftrace: Dynamically create the probe ftrace_ops for the trace_array")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/apic: Include the LDR when clearing out APIC registers

commit 558682b5291937a70748d36fd9ba757fb25b99ae upstream.

Although APIC initialization will typically clear out the LDR before
setting it, the APIC cleanup code should reset the LDR.

This was discovered with a 32-bit KVM guest jumping into a kdump
kernel. The stale bits in the LDR triggered a bug in the KVM APIC
implementation which caused the destination mapping for VCPUs to be
corrupted.

Note that this isn't intended to paper over the KVM APIC bug. The kernel
has to clear the LDR when resetting the APIC registers except when X2APIC
is enabled.

This lacks a Fixes tag because missing to clear LDR goes way back into pre
git history.

[ tglx: Made x2apic_enabled a function call as required ]

Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190826101513.5080-3-bsd@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/apic: Do not initialize LDR and DFR for bigsmp

commit bae3a8d3308ee69a7dbdf145911b18dfda8ade0d upstream.

Legacy apic init uses bigsmp for smp systems with 8 and more CPUs. The
bigsmp APIC implementation uses physical destination mode, but it
nevertheless initializes LDR and DFR. The LDR even ends up incorrectly with
multiple bit being set.

This does not cause a functional problem because LDR and DFR are ignored
when physical destination mode is active, but it triggered a problem on a
32-bit KVM guest which jumps into a kdump kernel.

The multiple bits set unearthed a bug in the KVM APIC implementation. The
code which creates the logical destination map for VCPUs ignores the
disabled state of the APIC and ends up overwriting an existing valid entry
and as a result, APIC calibration hangs in the guest during kdump
initialization.

Remove the bogus LDR/DFR initialization.

This is not intended to work around the KVM APIC bug. The LDR/DFR
ininitalization is wrong on its own.

The issue goes back into the pre git history. The fixes tag is the commit
in the bitkeeper import which introduced bigsmp support in 2003.

  git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git

Fixes: db7b9e9f26b8 ("[PATCH] Clustered APIC setup for >8 CPU systems")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190826101513.5080-2-bsd@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uprobes/x86: Fix detection of 32-bit user mode

commit 9212ec7d8357ea630031e89d0d399c761421c83b upstream.

32-bit processes running on a 64-bit kernel are not always detected
correctly, causing the process to crash when uretprobes are installed.

The reason for the crash is that in_ia32_syscall() is used to determine the
process's mode, which only works correctly when called from a syscall.

In the case of uretprobes, however, the function is called from a exception
and always returns 'false' on a 64-bit kernel. In consequence this leads to
corruption of the process's return address.

Fix this by using user_64bit_mode() instead of in_ia32_syscall(), which
is correct in any situation.

[ tglx: Add a comment and the following historical info ]

This should have been detected by the rename which happened in commit

  abfb9498ee13 ("x86/entry: Rename is_{ia32,x32}_task() to in_{ia32,x32}_syscall()")

which states in the changelog:

    The is_ia32_task()/is_x32_task() function names are a big misnomer: they
    suggests that the compat-ness of a system call is a task property, which
    is not true, the compatness of a system call purely depends on how it
    was invoked through the system call layer.
    .....

and then it went and blindly renamed every call site.

Sadly enough this was already mentioned here:

   8faaed1b9f50 ("uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and
arch_uretprobe_hijack_return_addr()")

where the changelog says:

    TODO: is_ia32_task() is not what we actually want, TS_COMPAT does
    not necessarily mean 32bit. Fortunately syscall-like insns can't be
    probed so it actually works, but it would be better to rename and
    use is_ia32_frame().

and goes all the way back to:

    0326f5a94dde ("uprobes/core: Handle breakpoint and singlestep exceptions")

Oh well. 7+ years until someone actually tried a uretprobe on a 32bit
process on a 64bit kernel....

Fixes: 0326f5a94dde ("uprobes/core: Handle breakpoint and singlestep exceptions")
Signed-off-by: Sebastian Mayr <me@sam.st>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190728152617.7308-1-me@sam.st
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Don't update RIP or do single-step on faulting emulation

commit 75ee23b30dc712d80d2421a9a547e7ab6e379b44 upstream.

Don't advance RIP or inject a single-step #DB if emulation signals a
fault.  This logic applies to all state updates that are conditional on
clean retirement of the emulation instruction, e.g. updating RFLAGS was
previously handled by commit 38827dbd3fb85 ("KVM: x86: Do not update
EFLAGS on faulting emulation").

Not advancing RIP is likely a nop, i.e. ctxt->eip isn't updated with
ctxt->_eip until emulation "retires" anyways.  Skipping #DB injection
fixes a bug reported by Andy Lutomirski where a #UD on SYSCALL due to
invalid state with EFLAGS.TF=1 would loop indefinitely due to emulation
overwriting the #UD with #DB and thus restarting the bad SYSCALL over
and over.

Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: stable@vger.kernel.org
Reported-by: Andy Lutomirski <luto@kernel.org>
Fixes: 663f4c61b803 ("KVM: x86: handle singlestep during emulation")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: x86: skip populating logical dest map if apic is not sw enabled

commit b14c876b994f208b6b95c222056e1deb0a45de0e upstream.

recalculate_apic_map does not santize ldr and it's possible that
multiple bits are set. In that case, a previous valid entry
can potentially be overwritten by an invalid one.

This condition is hit when booting a 32 bit, >8 CPU, RHEL6 guest and then
triggering a crash to boot a kdump kernel. This is the sequence of
events:
1. Linux boots in bigsmp mode and enables PhysFlat, however, it still
writes to the LDR which probably will never be used.
2. However, when booting into kdump, the stale LDR values remain as
they are not cleared by the guest and there isn't a apic reset.
3. kdump boots with 1 cpu, and uses Logical Destination Mode but the
logical map has been overwritten and points to an inactive vcpu.

Signed-off-by: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add implicit fb quirk for Behringer UFX1604

commit 1a15718b41df026cffd0e42cfdc38a1384ce19f9 upstream.

Behringer UFX1604 requires the similar quirk to apply implicit fb like
another Behringer model UFX1204 in order to fix the noisy playback.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204631
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix invalid NULL check in snd_emuusb_set_samplerate()

commit 6de3c9e3f6b3eaf66859e1379b3f35dda781416b upstream.

The quirk function snd_emuusb_set_samplerate() has a NULL check for
the mixer element, but this is useless in the current code.  It used
to be a check against mixer->id_elems[unitid] but it was changed later
to the value after mixer_eleme_list_to_info() which is always non-NULL
due to the container_of() usage.

This patch fixes the check before the conversion.

While we're at it, correct a typo in the comment in the function,
too.

Fixes: 8c558076c740 ("ALSA: usb-audio: Clean up mixer element list traverse")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Fix potential concurrent access to the deleted pool

commit 75545304eba6a3d282f923b96a466dc25a81e359 upstream.

The input pool of a client might be deleted via the resize ioctl, the
the access to it should be covered by the proper locks.  Currently the
only missing place is the call in snd_seq_ioctl_get_client_pool(), and
this patch papers over it.

Reported-by: syzbot+4a75454b9ca2777f35c7@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fixes inverted Conexant GPIO mic mute led

commit f9ef724d4896763479f3921afd1ee61552fc9836 upstream.

"enabled" parameter historically referred to the device input or
output, not to the led indicator. After the changes added with the led
helper functions the mic mute led logic refers to the led and not to
the mic input which caused led indicator to be negated.
Fixing logic in cxt_update_gpio_led and updated
cxt_fixup_gpio_mute_hook
Also updated debug messages to ease further debugging if necessary.

Fixes: 184e302b46c9 ("ALSA: hda/conexant - Use the mic-mute LED helper")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jeronimo Borque <jeronimo@borque.com.ar>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: line6: Fix memory leak at line6_init_pcm() error path

commit 1bc8d18c75fef3b478dbdfef722aae09e2a9fde7 upstream.

I forgot to release the allocated object at the early error path in
line6_init_pcm().  For addressing it, slightly shuffle the code so
that the PCM destructor (pcm->private_free) is assigned properly
before all error paths.

Fixes: 3450121997ce ("ALSA: line6: Fix write on zero-sized buffer")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Check mixer unit bitmap yet more strictly

commit f9f0e9ed350e15d51ad07364b4cf910de50c472a upstream.

The bmControls (for UAC1) or bmMixerControls (for UAC2/3) bitmap has a
variable size depending on both input and output pins.  Its size is to
fit with input * output bits.  The problem is that the input size
can't be determined simply from the unit descriptor itself but it
needs to parse the whole connected sources.  Although the
uac_mixer_unit_get_channels() tries to check some possible overflow of
this bitmap, it's incomplete due to the lack of the  evaluation of
input pins.

For covering possible overflows, this patch adds the bitmap overflow
check in the loop of input pins in parse_audio_mixer_unit().

Fixes: 0bfe5e434e66 ("ALSA: usb-audio: Check mixer unit descriptors more strictly")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/zsmalloc.c: fix build when CONFIG_COMPACTION=n

commit 441e254cd40dc03beec3c650ce6ce6074bc6517f upstream.

Fixes: 701d678599d0c1 ("mm/zsmalloc.c: fix race condition in zs_destroy_pool")
Link: http://lkml.kernel.org/r/201908251039.5oSbEEUT%25lkp@intel.com
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4/icmp: fix rt dst dev null pointer dereference

[ Upstream commit e2c693934194fd3b4e795635934883354c06ebc9 ]

In __icmp_send() there is a possibility that the rt->dst.dev is NULL,
e,g, with tunnel collect_md mode, which will cause kernel crash.
Here is what the code path looks like, for GRE:

- ip6gre_tunnel_xmit
  - ip6gre_xmit_ipv4
    - __gre6_xmit
      - ip6_tnl_xmit
        - if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
    - icmp_send
      - net = dev_net(rt->dst.dev); <-- here

The reason is __metadata_dst_init() init dst->dev to NULL by default.
We could not fix it in __metadata_dst_init() as there is no dev supplied.
On the other hand, the reason we need rt->dst.dev is to get the net.
So we can just try get it from skb->dev when rt->dst.dev is NULL.

v4: Julian Anastasov remind skb->dev also could be NULL. We'd better
still use dst.dev and do a check to avoid crash.

v3: No changes.

v2: fix the issue in __icmp_send() instead of updating shared dst dev
in {ip_md, ip6}_tunnel_xmit.

Fixes: c8b34e680a09 ("ip_tunnel: Add tnl_update_pmtu in ip_md_tunnel_xmit")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: make sure EPOLLOUT wont be missed

[ Upstream commit ef8d8ccdc216f797e66cb4a1372f5c4c285ce1e4 ]

As Jason Baron explained in commit 790ba4566c1a ("tcp: set SOCK_NOSPACE
under memory pressure"), it is crucial we properly set SOCK_NOSPACE
when needed.

However, Jason patch had a bug, because the 'nonblocking' status
as far as sk_stream_wait_memory() is concerned is governed
by MSG_DONTWAIT flag passed at sendmsg() time :

    long timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT);

So it is very possible that tcp sendmsg() calls sk_stream_wait_memory(),
and that sk_stream_wait_memory() returns -EAGAIN with SOCK_NOSPACE
cleared, if sk->sk_sndtimeo has been set to a small (but not zero)
value.

This patch removes the 'noblock' variable since we must always
set SOCK_NOSPACE if -EAGAIN is returned.

It also renames the do_nonblock label since we might reach this
code path even if we were in blocking mode.

Fixes: 790ba4566c1a ("tcp: set SOCK_NOSPACE under memory pressure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Reported-by: Vladimir Rutsky <rutsky@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/smc: make sure EPOLLOUT is raised

[ Upstream commit 4651d1802f7063e4d8c0bcad957f46ece0c04024 ]

Currently, we are only explicitly setting SOCK_NOSPACE on a write timeout
for non-blocking sockets. Epoll() edge-trigger mode relies on SOCK_NOSPACE
being set when -EAGAIN is returned to ensure that EPOLLOUT is raised.
Expand the setting of SOCK_NOSPACE to non-blocking sockets as well that can
use SO_SNDTIMEO to adjust their write timeout. This mirrors the behavior
that Eric Dumazet introduced for tcp sockets.

Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ursula Braun <ubraun@linux.ibm.com>
Cc: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Default fib6_type to RTN_UNICAST when not set

[ Upstream commit c7036d97acd2527cef145b5ef9ad1a37ed21bbe6 ]

A user reported that routes are getting installed with type 0 (RTN_UNSPEC)
where before the routes were RTN_UNICAST. One example is from accel-ppp
which apparently still uses the ioctl interface and does not set
rtmsg_type. Another is the netlink interface where ipv6 does not require
rtm_type to be set (v4 does). Prior to the commit in the Fixes tag the
ipv6 stack converted type 0 to RTN_UNICAST, so restore that behavior.

Fixes: e8478e80e5a7 ("net/ipv6: Save route type in rt6_info")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6/addrconf: allow adding multicast addr if IFA_F_MCAUTOJOIN is set

[ Upstream commit f17f7648a49aa6728649ddf79bdbcac4f1970ce4 ]

In commit 93a714d6b53d ("multicast: Extend ip address command to enable
multicast group join/leave on") we added a new flag IFA_F_MCAUTOJOIN
to make user able to add multicast address on ethernet interface.

This works for IPv4, but not for IPv6. See the inet6_addr_add code.

static int inet6_addr_add()
{
...
if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) {
ipv6_mc_config(net->ipv6.mc_autojoin_sk, true...)
}

ifp = ipv6_add_addr(idev, cfg, true, extack); <- always fail with maddr
if (!IS_ERR(ifp)) {
...
} else if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) {
ipv6_mc_config(net->ipv6.mc_autojoin_sk, false...)
}
}

But in ipv6_add_addr() it will check the address type and reject multicast
address directly. So this feature is never worked for IPv6.

We should not remove the multicast address check totally in ipv6_add_addr(),
but could accept multicast address only when IFA_F_MCAUTOJOIN flag supplied.

v2: update commit description

Fixes: 93a714d6b53d ("multicast: Extend ip address command to enable multicast group join/leave on")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: tls, fix sk_write_space NULL write when tx disabled

[ Upstream commit d85f01775850a35eae47a0090839baf510c1ef12 ]

The ctx->sk_write_space pointer is only set when TLS tx mode is enabled.
When running without TX mode its a null pointer but we still set the
sk sk_write_space pointer on close().

Fix the close path to only overwrite sk->sk_write_space when the current
pointer is to the tls_write_space function indicating the tls module should
clean it up properly as well.

Reported-by: Hillf Danton <hdanton@sina.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Fixes: 57c722e932cfb ("net/tls: swap sk_write_space on close")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/tls: swap sk_write_space on close

[ Upstream commit 57c722e932cfb82e9820bbaae1b1f7222ea97b52 ]

Now that we swap the original proto and clear the ULP pointer
on close we have to make sure no callback will try to access
the freed state. sk_write_space is not part of sk_prot, remember
to swap it.

Reported-by: syzbot+dcdc9deefaec44785f32@syzkaller.appspotmail.com
Fixes: 95fa145479fb ("bpf: sockmap/tls, close can race with map free")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/tls: Fixed return value when tls_complete_pending_work() fails

[ Upstream commit 150085791afb8054e11d2e080d4b9cd755dd7f69 ]

In tls_sw_sendmsg() and tls_sw_sendpage(), the variable 'ret' has
been set to return value of tls_complete_pending_work(). This allows
return of proper error code if tls_complete_pending_work() fails.

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/tilcdc: Register cpufreq notifier after we have initialized crtc

[ Upstream commit 432973fd3a20102840d5f7e61af9f1a03c217a4c ]

Register cpufreq notifier after we have initialized the crtc and
unregister it before we remove the ctrc. Receiving a cpufreq notify
without crtc causes a crash.

Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Fix RX_TERMINATION_FORCE_ENABLE define value

[ Upstream commit ebcb8f8508c5edf428f52525cec74d28edea7bcb ]

Fix RX_TERMINATION_FORCE_ENABLE define value from 0x0089 to 0x00A9
according to MIPI Alliance MPHY specification.

Fixes: e785060ea3a1 ("ufs: definitions for phy interface")
Signed-off-by: Pedro Sousa <sousa@synopsys.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tfp410: fix memleak in get_modes()

[ Upstream commit c08f99c39083ab55a9c93b3e93cef48711294dad ]

We don't free the edid blob allocated by the call to drm_get_edid(),
causing a memleak. Fix this by calling kfree(edid) at the end of the
get_modes().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610135739.6077-1-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: bcm2835_wdt: Fix module autoload

[ Upstream commit 215e06f0d18d5d653d6ea269e4dfc684854d48bf ]

The commit 5e6acc3e678e ("bcm2835-pm: Move bcm2835-watchdog's DT probe
to an MFD.") broke module autoloading on Raspberry Pi. So add a
module alias this fix this.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: fix broadwell EU computation

[ Upstream commit 63ac3328f0d1d37f286e397b14d9596ed09d7ca5 ]

subslice_mask is an array indexed by slice, not subslice.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 8cc7669355136f ("drm/i915: store all subslice masks")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108712
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181112123931.2815-1-lionel.g.landwerlin@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools: hv: fix KVP and VSS daemons exit code

[ Upstream commit b0995156071b0ff29a5902964a9dc8cfad6f81c0 ]

HyperV KVP and VSS daemons should exit with 0 when the '--help'
or '-h' flags are used.

Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools: hv: fixed Python pep8/flake8 warnings for lsvmbus

[ Upstream commit 5912e791f3018de0a007c8cfa9cb38c97d3e5f5c ]

Fixed pep8/flake8 python style code for lsvmbus tool.

The TAB indentation was on purpose ignored (pep8 rule W191) to make
sure the code is complying with the Linux code guideline.
The following command doe not show any warnings now:
pep8 --ignore=W191 lsvmbus
flake8 --ignore=W191 lsvmbus

Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: fotg2: restart hcd after port reset

[ Upstream commit 777758888ffe59ef754cc39ab2f275dc277732f4 ]

On the Gemini SoC the FOTG2 stalls after port reset
so restart the HCD after each port reset.

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/ast: Fixed reboot test may cause system hanged

[ Upstream commit 05b439711f6ff8700e8660f97a1179650778b9cb ]

There is another thread still access standard VGA I/O while loading drm driver.
Disable standard VGA I/O decode to avoid this issue.

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523410059-18415-1-git-send-email-yc_chen@aspeedtech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: emev2: avoid race when unregistering slave client

[ Upstream commit d7437fc0d8291181debe032671a289b6bd93f46f ]

After we disabled interrupts, there might still be an active one
running. Sync before clearing the pointer to the slave device.

Fixes: c31d0a00021d ("i2c: emev2: add slave support")
Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>