Arnd Bergmann [Thu, 14 Feb 2013 22:26:54 +0000 (23:26 +0100)]
ARM: shmobile: mark mackerel sh_mmcif_device __maybe_unused
Patch
eac036ef9e "ARM: shmobile: streamline mackerel SD and MMC devices"
made the use of the sh_mmcif_device variable for mackarel optional,
but the definition is always provided, causing a build warning.
arch/arm/mach-shmobile/board-mackerel.c:1120:31: warning: 'sh_mmcif_device'
defined but not used [-Wunused-variable]
Marking the variable as __maybe_unused will do the right thing here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Tue, 12 Feb 2013 17:15:33 +0000 (18:15 +0100)]
ARM: shmobile: streamline mackerel SD and MMC devices
This patch fixes the following issues with SD and MMC interfaces on mackerel:
1. replace custom card-detection functions with standard GPIO CD API
2. resources don't have to be numbered
3. add SDHI interrupt names
4. remove OCR masks, where regulators are used
5. only specify SDHI CD interrupts on interfaces where a CD pin is present -
SDHI0
6. don't instantiate an MMCIF device and initialise MMCIF pins if SDHI1 is
selected
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Wed, 13 Feb 2013 10:34:03 +0000 (11:34 +0100)]
ARM: shmobile: switch SDHI0 to GPIO regulator on armadillo800eva
When regulators are used with MMC devices, explicitly provided OCR masks
are ignored, they can be removed from platform data. Also switch SDHI0
from fixed regulator with hard-wired GPIO levels to a proper GPIO regulator
instance to enable dynamic voltage switching.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Guennadi Liakhovetski [Wed, 16 Jan 2013 07:54:18 +0000 (08:54 +0100)]
ARM: shmobile: use GPIO SD-card detection on armadillo800eva
Switch SDHI0 and SDHI1 SD-card interfaces on armadillo800eva to using GPIO
card detection, which provides maximum power saving and automatically
selects IRQ or polling mode, depending on the CD GPIO capability.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 18 Mar 2013 12:26:33 +0000 (21:26 +0900)]
Merge branches 'soc' and 'pinmux' into boards-base
Phil Edworthy [Thu, 31 Jan 2013 01:45:01 +0000 (02:45 +0100)]
r8a7779: Add Display Unit clock support
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
[Rename device from to rcarfb to rcar-du]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Manual conflict resolution]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 7 Mar 2013 12:59:26 +0000 (13:59 +0100)]
ARM: shmobile: r8a7779: Remove INTC function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 7 Mar 2013 12:59:26 +0000 (13:59 +0100)]
ARM: shmobile: r8a7779: Remove LBSC function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 7 Mar 2013 12:59:26 +0000 (13:59 +0100)]
ARM: shmobile: r8a7779: Remove USB function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:38:10 +0000 (14:38 +0100)]
ARM: shmobile: r8a7779: Remove HSPI function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:38:10 +0000 (14:38 +0100)]
ARM: shmobile: r8a7779: Remove SCIF function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:38:10 +0000 (14:38 +0100)]
ARM: shmobile: r8a7779: Remove SDHI and MMCIF function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 15:30:34 +0000 (16:30 +0100)]
ARM: shmobile: r8a7779: Remove DU function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 9 Jan 2013 21:32:25 +0000 (22:32 +0100)]
ARM: shmobile: r8a7779: Remove DU1_DOTCLKOUT1 GPIO
The function is not documented in the r8a7779 datasheet. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:38:10 +0000 (14:38 +0100)]
ARM: shmobile: r8a7740: Remove SDHI and MMCIF function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 15:30:34 +0000 (16:30 +0100)]
ARM: shmobile: r8a7740: Remove LCD0 and LCD1 function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 17:55:16 +0000 (18:55 +0100)]
ARM: shmobile: sh73a0: Remove IrDA function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 17:55:16 +0000 (18:55 +0100)]
ARM: shmobile: sh73a0: Remove USB function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 17:55:16 +0000 (18:55 +0100)]
ARM: shmobile: sh73a0: Remove BSC function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 17:55:16 +0000 (18:55 +0100)]
ARM: shmobile: sh73a0: Remove KEYSC function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 17:32:00 +0000 (18:32 +0100)]
ARM: shmobile: sh73a0: Remove pull-up function GPIOS
Those GPIOs have been deprecated by the pinconf API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 15:30:34 +0000 (16:30 +0100)]
ARM: shmobile: sh73a0: Remove FSI function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 15:30:34 +0000 (16:30 +0100)]
ARM: shmobile: sh73a0: Remove I2C function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 15:30:34 +0000 (16:30 +0100)]
ARM: shmobile: sh73a0: Remove SCIFA and SCIFB function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 15:30:34 +0000 (16:30 +0100)]
ARM: shmobile: sh73a0: Remove LCDC and LCDC2 function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:24:53 +0000 (14:24 +0100)]
ARM: shmobile: sh7372: Remove SDHI and MMCIF function GPIOs
Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 7 Mar 2013 12:58:48 +0000 (13:58 +0100)]
sh-pfc: r8a7779: Remove INTC function GPIOS
All r8a7779 platforms now use the pinctrl API to control the INTC pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:58:48 +0000 (13:58 +0100)]
sh-pfc: r8a7779: Remove LBSC function GPIOS
All r8a7779 platforms now use the pinctrl API to control the LBSC pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:58:48 +0000 (13:58 +0100)]
sh-pfc: r8a7779: Remove USB function GPIOS
All r8a7779 platforms now use the pinctrl API to control the USB pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 13:36:28 +0000 (14:36 +0100)]
sh-pfc: r8a7779: Remove HSPI function GPIOS
All r8a7779 platforms now use the pinctrl API to control the HSPI pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 13:36:28 +0000 (14:36 +0100)]
sh-pfc: r8a7779: Remove SCIF function GPIOS
All r8a7779 platforms now use the pinctrl API to control the SCIF pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 13:36:28 +0000 (14:36 +0100)]
sh-pfc: r8a7779: Remove SDHI and MMCIF function GPIOS
All r8a7779 platforms now use the pinctrl API to control the SDHI and
MMCIF pins, the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 9 Jan 2013 21:32:25 +0000 (22:32 +0100)]
sh-pfc: r8a7779: Remove DU1_DOTCLKOUT1 GPIO
The function is not documented in the r8a7779 datasheet. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 13:36:28 +0000 (14:36 +0100)]
sh-pfc: r8a7740: Remove SDHI and MMCIF function GPIOS
All r8a7740 platforms now use the pinctrl API to control the SDHI and
MMCIF pins, the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: r8a7740: Remove LCD0 and LCD1 function GPIOS
All r8a7740 platforms now use the pinctrl API to control the LCD0 and
LCD1 pins, the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 17:53:05 +0000 (18:53 +0100)]
sh-pfc: sh73a0: Remove IrDA function GPIOS
All sh73a0 platforms now use the pinctrl API to control the IrDA pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 17:53:05 +0000 (18:53 +0100)]
sh-pfc: sh73a0: Remove USB function GPIOS
All sh73a0 platforms now use the pinctrl API to control the USB pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 17:53:05 +0000 (18:53 +0100)]
sh-pfc: sh73a0: Remove BSC function GPIOS
All sh73a0 platforms now use the pinctrl API to control the BSC pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 17:53:05 +0000 (18:53 +0100)]
sh-pfc: sh73a0: Remove KEYSC function GPIOS
All sh73a0 platforms now use the pinctrl API to control the KEYSC pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 17:32:00 +0000 (18:32 +0100)]
sh-pfc: sh73a0: Remove pull-up function GPIOS
All sh73a0 platforms now use the pinconf API to control pull-ups, the
corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Remove FSI function GPIOS
All sh73a0 platforms now use the pinctrl API to control the FSI pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Remove I2C function GPIOS
All sh73a0 platforms now use the pinctrl API to control the I2C pins,
the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Remove SCIFA and SCIFB function GPIOS
All sh73a0 platforms now use the pinctrl API to control the SCIFA and
SCIFB pins, the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Remove LCD and LCD2 function GPIOS
All sh73a0 platforms now use the pinctrl API to control the LCD and
LCD2 pins, the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 13:23:17 +0000 (14:23 +0100)]
sh-pfc: sh7372: Remove SDHI and MMCIF function GPIOS
All sh7372 platforms now use the pinctrl API to control the SDHI and
MMCIF pins, the corresponding function GPIOS are unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:46:02 +0000 (13:46 +0100)]
ARM: shmobile: marzen: Register pinctrl mappings for INTC
Replace the GPIO-based INTC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 7 Mar 2013 12:46:02 +0000 (13:46 +0100)]
ARM: shmobile: marzen: Register pinctrl mappings for LBSC
Replace the GPIO-based LBSC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 7 Mar 2013 12:46:02 +0000 (13:46 +0100)]
ARM: shmobile: marzen: Register pinctrl mappings for USB
Replace the GPIO-based USB pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:22:11 +0000 (14:22 +0100)]
ARM: shmobile: marzen: Register pinctrl mappings for HSPI
Replace the GPIO-based HSPI pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:22:11 +0000 (14:22 +0100)]
ARM: shmobile: marzen: Register pinctrl mappings for SCIF
Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:22:11 +0000 (14:22 +0100)]
ARM: shmobile: marzen: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:22:11 +0000 (14:22 +0100)]
ARM: shmobile: mackerel: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:23:50 +0000 (03:23 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for USB
Replace the GPIO-based USB pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:21:36 +0000 (03:21 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for BSC
Replace the GPIO-based BSC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:23:50 +0000 (03:23 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for FSI
Replace the GPIO-based FSI pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for I2C
Replace the GPIO-based I2C pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for SCIF
Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for LCD
Replace the GPIO-based LCD pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: kota2: Register pinctrl mappings for BSC
Replace the GPIO-based BSC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: kota2: Register pinctrl mappings for KEYSC
Replace the GPIO-based KEYSC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: kota2: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.
Board code used the non-pulled-up version of the function GPIOs, but
those are defined in the PFC driver as enabling the pull-ups anyway.
Enable pull-ups on the MMCIF data and command pins through the pinconf
API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kota2: Register pinctrl mappings for SCIF
Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: bonito: Register pinctrl mappings for LCDC0
Replace the GPIO-based LCDC0 pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:34:23 +0000 (14:34 +0100)]
ARM: shmobile: armadillo800eva: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: armadillo800eva: Register pinctrl mappings for LCDC0
Replace the GPIO-based LCDC0 pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 13:21:27 +0000 (14:21 +0100)]
ARM: shmobile: ap4evb: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for IrDA
Replace the GPIO-based IrDA pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for KEYSC
Replace the GPIO-based KEYSC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for FSI
Replace the GPIO-based FSI pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for I2C
Replace the GPIO-based I2C pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for SCIF
Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 7 Mar 2013 12:38:51 +0000 (13:38 +0100)]
sh-pfc: r8a7779: Add INTC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:38:51 +0000 (13:38 +0100)]
sh-pfc: r8a7779: Add LBSC pin groups and functions
Only the CS pins and functions are currently handled.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:38:51 +0000 (13:38 +0100)]
sh-pfc: r8a7779: Add USB pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:36:36 +0000 (13:36 +0100)]
sh-pfc: r8a7779: Add USB0 and USB1 PENC pinmux support
The USB0 and USB1 PENC functions were missing. Add them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 18:04:43 +0000 (19:04 +0100)]
sh-pfc: r8a7779: Add HSPI pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 18:04:43 +0000 (19:04 +0100)]
sh-pfc: r8a7779: Add SCIF pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 18:04:43 +0000 (19:04 +0100)]
sh-pfc: r8a7779: Add SDHI and MMCIF pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: r8a7779: Add DU pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Guennadi Liakhovetski [Wed, 23 Jan 2013 16:37:44 +0000 (17:37 +0100)]
sh-pfc: r8a7740: Add SDHI and MMCIF pin groups and functions
Add pin groups for the first two SDHI interfaces and two alternative pin
groups for the MMCIF interface on the r8a7740 SoC.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Tue, 12 Mar 2013 00:55:08 +0000 (01:55 +0100)]
sh-pfc: sh73a0: Add IrDA pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Tue, 12 Mar 2013 00:55:08 +0000 (01:55 +0100)]
sh-pfc: sh73a0: Add USB pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Tue, 12 Mar 2013 00:55:08 +0000 (01:55 +0100)]
sh-pfc: sh73a0: Add BSC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Tue, 12 Mar 2013 00:55:08 +0000 (01:55 +0100)]
sh-pfc: sh73a0: Add KEYSC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Guennadi Liakhovetski [Tue, 12 Feb 2013 15:50:03 +0000 (16:50 +0100)]
sh-pfc: sh73a0: Add SDHI and MMCIF pin groups and functions
Add pin group definitions for SDHI0, SDHI1, SDHI2 and MMCIF interfaces on
sh73a0.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Add FSI pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Add I2C2 and I2C3 pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Add SCIFA and SCIFB pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Add LCD and LCD2 pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 00:31:23 +0000 (01:31 +0100)]
sh-pfc: sh73a0: Add bias (pull-up/down) pinconf support
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Guennadi Liakhovetski [Wed, 23 Jan 2013 16:37:45 +0000 (17:37 +0100)]
sh-pfc: sh7372: Add SDHCI and MMCIF pin groups and functions
Add pin groups for all three SDHI interfaces and two alternative pin
groups for the MMCIF interface on the sh7372 SoC.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 17:18:30 +0000 (18:18 +0100)]
sh-pfc: Return an error if a pin doesn't support the requested direction
When setting a pin direction verify that the requested direction is
supported, and return an error if it isn't.
This requires pin configuration information to be supplied by SoC data.
The check is a no-op if the information is not supplied.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sun, 10 Mar 2013 17:00:02 +0000 (18:00 +0100)]
sh-pfc: Convert message printing from pr_* to dev_*
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sun, 10 Mar 2013 16:25:29 +0000 (17:25 +0100)]
sh-pfc: Clean up pin configuration type handling
Set pin configuration type to
- PINMUX_TYPE_NONE at initialization time and when disabling a function
or freeing a GPIO
- PINMUX_TYPE_FUNCTION when enabling a function
- PINMUX_TYPE_INPUT or PINMUX_TYPE_OUTPUT when setting the GPIO
direction
Verify that the type is PINMUX_TYPE_NONE when enabling a function or
requesting a GPIO and return -EBUSY if it isn't.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sun, 10 Mar 2013 15:55:19 +0000 (16:55 +0100)]
sh-pfc: Merge sh_pfc_reconfig_pin() into sh_pfc_gpio_set_direction()
The sh_pfc_reconfig_pin() is only called from a single location. Merge
it into its call site to make the code easier to follow.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sun, 10 Mar 2013 15:44:02 +0000 (16:44 +0100)]
sh-pfc: Implement generic pinconf support
The existing PFC pinconf implementation, tied to the PFC-specific pin
types, isn't used by drivers or boards. Replace it with the generic
pinconf types to implement bias (pull-up/down) setup. Other pin
configuration options can be implemented later if needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sun, 10 Mar 2013 15:38:23 +0000 (16:38 +0100)]
sh-pfc: Use proper error codes
Return proper error codes instead of -1, and propagate the error codes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / log