ARM: shmobile: r8a7790: Reference DMA channels in MMCIF DT nodes

Add references to the transmit and receive DMA channels in the two
MMCIF nodes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 108216c1e08db6c69a54ba7ee593335eceea2077)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: Add MMCIF0 DT node

Add the MMCIF0 device to the r8a7791 device tree.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 8edae499162c30af16f0b8a77d394c19791ae372)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Rename mmcif node to mmc

Node names should describe the function of the device, not its IP core
name.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 22c2b78d3131cd161599be7a9f320523969b23c4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7778: Add SoC-specific TMU compatible property

The TMU timers used the generic compatible property only.
Add the SoC-specific one, to make it future proof.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 45b439c1aae45d344c55864f81d52ef90ce4d8f8)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a73a4: Add SoC-specific CMT compatible property

The CMT1 timer used the generic compatible property only.
Add the SoC-specific one, which is already documented, to make it future
proof.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 2cd823fc01d61e09f50d64624ec53da090ced742)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: henninger: enable HS-USB

Enable HS-USB device for the Henninger board, defining the GPIO that the driver
should check when probing (which is the ID output from MAX3355 OTG chip).

Note that there will be pinctrl-related error messages if both internal PCI
and HS-USB drivers are enabled but they should be just ignored.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: added pin function/group and prop, moved device node, fixed summary,
added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 6f4f7156e0e6b215fad118abf4830177528ef7ad)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch: enable HS-USB

Enable HS-USB device for the Koelsch board, defining the GPIO that the driver
should check when probing (which is the ID output from MAX3355 OTG chip).

Note that there will be pinctrl-related error messages if both internal PCI
and HS-USB drivers are enabled but they should be just ignored.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: added pin function/group and prop, moved device node, fixed summary,
added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit fc4a00b78c7f8a770b9608164c0c9cdd0e4e68c2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: add HS-USB device node

Define the R8A7791 generic part of the HS-USB device node. It is up to the board
file to enable the device.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: fixed summary, added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 1c1fee7cbba99023a11d4d2991b56c99a3174bd4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: enable HS-USB

Enable HS-USB device for the Lager board, defining the GPIO that the driver
should check when probing. Since this board doesn't have the OTG ID pin, we
assume that GP5_18 (USB0_PWEN) is an ID pin because it is 1 when the SW5 is
in position 2-3 (meaning USB function) and 0 in other positions.

Note that there will be pinctrl-related error messages if both internal PCI
and HS-USB drivers are enabled but they should be just ignored.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: added pin node and prop, moved device node, fixed summary, supplemented
changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit e03074a7b5fdd2834a9fbbe77bc52a1ddb0d017f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: add HS-USB device node

Define the R8A7790 generic part of the HS-USB device node.
It is up to the board file to enable the device.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: fixed summary, added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit ae0a555b68ae4feef07e919b22ef2e0b792616ee)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: add USB3.0 device node

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit c196931ece017a0aeeef4ee6d4fbb5adeb7dfd0a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: enable USB3.0

Since the PHY of USB3.0 and EHCI/OHCI ch2 are the same, the USB3.0
driver cannot use the phy driver when the EHCI/OHCI ch2 already used it:

phy phy-e6590100.usb-phy.3: phy init failed --> -16
xhci-hcd: probe of ee000000.usb failed with error -16

If so, we have to unbind the EHCI/OHCI ch2, and then we have to bind
the USB3.0 driver as the following:

  echo 0000:02:02.0 > /sys/bus/pci/drivers/ehci-pci/unbind
  echo 0000:02:01.0 > /sys/bus/pci/drivers/ohci-pci/unbind
  echo ee000000.usb > /sys/bus/platform/drivers/xhci-hcd/bind

Note that there will be pinctrl-related error messages if both
internal PCI and USB3.0 are enabled but they should be just ignored:

sh-pfc e6060000.pfc: pin GP_5_22 already requested by ee0d0000.pci; cannot claim for ee000000.usb
sh-pfc e6060000.pfc: pin-182 (ee000000.usb) status -22
ata1: SATA link down (SStatus 0 SControl 300)
sh-pfc e6060000.pfc: could not request pin 182 (GP_5_22) from group usb2  on device sh-pfc

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 37f7c1b0c1ed9465b2e2609ba57bba8a874ddd3c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: add USB3.0 device node

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 157fcd8a3e6fb46ad99b615838afe16e8fcebd61)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7794: Add arch_timer to device tree

Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit da33648c4296a8590fbeafd7c1ae4494dfe8b04c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: bockw-reference: Initialise TMU device using DT

Initialise TMU device using DT when booting bockw
using DT-reference.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 18b27aeb5591588de35628bf1e423abf24fe9695)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7778: Add TMU nodes

This describes all of the TMU hardware of the r8a7778.
Each node is disabled and may be enabled as necessary
by board DTS files.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 2109b5a28d27a593ab5afa7179fbef2f6a7cabcd)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: armadillo800eva dts: Enable TMU0

ch0 will be used for clock events and for periodic clock events,
ch1 will be used as clock source.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit df211020718a7cbad0a8018c924ba7dd002f7282)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7740 dtsi: Add TMU0 and TMU1 device nodes

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 600363334de89169a8dbbb1db874777d46fc239e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: Add MMP clock to device tree

Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 74d89d25f6b0d84f7cd2fc09dc708177787c1465)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Add MMP clock to device tree

Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 4ba8f2468ce346642b4ace3cdf4bdd8d29175011)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: Add SGX clock to device tree

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit e4d2fd9eb43d12e9b6a7ab842bf6986b4dd75a1d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Add RGX clock to device tree

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 2284ff5f3f7d58e33812f4387c2ac8a09428e4cf)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7740 dtsi: Fix clock index for scifa2

The clocks property for the scifa2 device node referred to the scifa0
clock index instead of the scifa2 clock index.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit b345aee4d7c2387f2e36cdeb64e0f4dce34598f3)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: switch from scif to scifa

SCIF and SCIFA can be plexed onto the same wires on Lager board. The
datasheet also describes the wires as SCIFA. So, to make use of the
bigger FIFOs switch to SCIFA instead.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 7c05589413fa9902f2843e91845d6084f6f8e2cd)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Conflicts:
arch/arm/boot/dts/r8a7790-lager.dts

ARM: shmobile: r8a7791: link PCI USB devices to USB PHY

Describe the PCI USB devices that are behind the PCI bridges, adding necessary
links to the USB PHY device.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit e1bce1249d15b27c56790ab0ecea4a49dcd0e081)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: link PCI USB devices to USB PHY

Describe the PCI USB devices that are behind the PCI bridges, adding necessary
links to the USB PHY device.

Based on the original work by Ben Dooks <ben.dooks@codethink.co.uk>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 538c40e52df32285aa9440995c7345ea1c4d83b4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: henninger: enable USB PHY

Enable USB PHY device for the Henninger board.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit fa03f6b243cb29698fe6a2687ac1d8fa9d4da2b8)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch: enable USB PHY

Enable USB PHY device for the Koelsch board.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit dc80d8bcac7c2eb0421b19cb7c2e297fbaf76da7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: add USB PHY DT support

Define the R8A7791 generic part of the USB PHY device node. It is up to the
board file to enable the device.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 3b7e530d28db276b596251bbd435a058e27810f1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: enable USB PHY

Enable USB PHY device for the Lager board.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 6742cafb6fe84f00f096b206372b48f14eb56946)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: add USB PHY DT support

Define the R8A7790 generic part of the USB PHY device node. It is up to the
board file to enable the device.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit e089f6578ff96243e31ad6257d7c9f4c8a447107)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7740 dtsi: Add missing INTCA clock for irqpin module

This clock drives the INTCA irqpin controller modules.
Before, it was assumed enabled by the bootloader or reset state.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: devicetree@vger.kernel.org
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 3ab84ee95ba4e28b30fd8ec7c38f5e9f72c4b4b7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: marzen-reference: Don't include legacy clock.h

The marzen-reference board file doesn't need the clock.h header, don't
include it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 803fc9b590f74ef1066be328f2f33c2b285ca3af)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch: Enable DU device in DT

Specify the DU output topology, enable the DU device and configure the
related pins.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 0ee56d403549fd97d8acac6b7ba3a17f6999c30a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch-reference: Remove DU platform device

The DU device is now instantiated from the device tree, remove the
corresponding platform device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 910343e7e281c3f6ac0c660061370afa306d24d0)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: Enable DU device in DT

Specify the DU output topology, enable the DU device and configure the
related pins.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 3edd18ffe53e3c13820310f51109c12e45874cfd)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager-reference: Remove DU platform device

The DU device is now instantiated from the device tree, remove the
corresponding platform device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 64d9c22154d77a448944733d1373c8c0af8e0de2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: marzen: Enable DU device in DT

Specify the DU output topology, enable the DU device and configure the
related pins.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit a7aee3ac437be568e6285c10d765ec074fa19587)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Select CONFIG_ZONE_DMA when CONFIG_ARM_LPAE is enabled

Most IP cores on ARM Renesas platforms can only address 32 bits of
physical memory for DMA. Without CONFIG_ZONE_DMA enabled and with the
recent CMA highmem allocation support, the default CMA zone is reserved
above the 4GiB limit when LPAE is enabled, resulting in various driver
failures.

Fix the problem by selecting CONFIG_ZONE_DMA. Other options to
investigate in the future would be to either enable IOMMU support or use
custom CMA reservations for peripherals not supporting LPAE.

While not a strict dependency, the "[PATCH 0/4] Low/high memory CMA
reservation fixes" series is also required to fix a different but related CMA
allocation problem.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 3794705aeb318c431c07072f04380c78cc5a84ac)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7740: Add A3SM pm domain support

Add support for the A3SM power domain, and hook it up as a subdomain of
A4S.

This domain contains the System CPU (Cortex-A9) hardware block. Hence
move the special CPU handling from A4S to A3SM.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit dc4470e177973feedd82596969d86468a1695b1e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7740: Add A4SU pm domain support

Add support for the A4SU power domain.
This domain contains the USBPHY hardware block, which is currently not
used by any driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 4ee7830c3ef9224bd078abe41a33c7396f827078)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7740/armadillo legacy: Add A4R pm domain support

Add support for the A4R power domain, and hook up the A3RV subdomain,
and the CEU0, TMU0, and IIC0 hardware blocks.
This domain also contains the Realtime CPU (SH-4A), Realtime CPU debug
modules, H-UDI, RT-SHwy, INTCS, RT-HPB, VIO6C, JPU, RTDMAC1/2, SSP,
MSIOF0, CMT0, ICB, DREQPAK (RT), 2DDMAC, IPMMUI, and 2DG hardware
blocks, but these are currently not used by any driver.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 1618a677046b0391621708734f56886233210047)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7740: Add D4 pm domain support

Add support for the D4 power domain.
This domain contains the Coresight-ETM hardware block.

As long as the ARM debug/perf code doesn't use resource management with
runtime PM support, the D4 power domain must be kept powered to avoid a
crash during resume from s2ram (dbg_cpu_pm_notify() calls
reset_ctrl_regs() unconditionally, causing an undefined instruction
oops).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 7e81f5434db5bbef3ac55d3f44f702566c0323c6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7740/armadillo legacy: Add A4MP pm domain support

Add support for the A4MP power domain, and hook up the HDMI-Link and FSI
hardware blocks.
This domain also contains the SPU2, FMSI, and BBIF2 hardware blocks,
but these are currently not used by any driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 77192e1e25a57a519df30015b29c046bd6a769fc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7740: Add A3SG pm domain support

Add support for the A3SG power domain, and hook it up as a subdomain of
A4S.
This domain contains the SGX540 hardware block, which is currently not
used by any driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 92e88fd7793401dc7bc1b5cec93761e83b19b947)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7740: Add A3RV pm domain support

Add support for the A3RV power domain.
This domain contains the VPU5F and VCP1 hardware blocks, which are
currently not used by any driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 995d925058b63f8300b20d458d941a8a1306d8fb)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: armadillo800eva legacy: Add missing A4S pm domain devices

Commit 8459293c27bcd13a ("ARM: shmobile: r8a7740: add A4S pm domain
support") added the A4S power domain, but forgot to hook up the GbEther
hardware block.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 671c522a69fc6fa6960ada4c55bc7186f7d89a3a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: armadillo800eva legacy: Add missing A3SP pm domain devices

Commit 802a5639aa7041b2 ("ARM: shmobile: r8a7740: add A3SP pm domain
support") added the A3SP power domain, but forgot to hook up the TPU,
SDHI0/1, and MMCIF hardware blocks.

Note: As the default PM QoS latency constraint for SDHI is only 100 µs
(cfr. commit c419e611c3c59c0e ("tmio_mmc / PM: Use PM QoS latency
constraint"), while DEFAULT_DEV_LATENCY_NS is 250000, suspend fails with
-EBUSY, unless the constraint is increased first to more than 500 µs
using e.g.

    echo 501 > /sys/devices/platform/sh_mobile_sdhi.0/power/pm_qos_resume_latency_us

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 4311d9654c66b7cc7147035b8ec74f41ddffa650)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7740: Add missing A4S pm domain devices

Commit 8459293c27bcd13a ("ARM: shmobile: r8a7740: add A4S pm domain
support") added the A4S power domain, but forgot to hook up the INTCA
hardware block.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 3b358cb8b7c73304ea2c634afc644cfad37adbdc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7740: Add missing A3SP pm domain devices

Commit 802a5639aa7041b2 ("ARM: shmobile: r8a7740: add A3SP pm domain
support") added the A3SP power domain, but forgot to hook up the IPPMU,
DMAC0/1/2, and USBDMAC hardware blocks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 80f643b39346768878317eb04bd4b1deb4551537)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: Add DU node to device tree

Add the DU device with a disabled state. Boards that want to enable the
DU need to specify the output topology

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 8eefac2d6620642e8c44bf4acbf442c7d89f39d8)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Add DU node to device tree

Add the DU device with a disabled state. Boards that want to enable the
DU need to specify the output topology.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[horms+renesas@verge.net.au: resolved minor conflict]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 3ac6a83c09cbb74ebb3d3e7e6e40e1ead3ff9d01)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7779: Add DU node to device tree

Add the DU device with a disabled state. Boards that want to enable the
DU need to specify the output topology

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[horms+renesas@verge.net.au: resolved minor conflict]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 1f08bbe8ac737a728812df88cbb3049842df7b84)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Remove FSF address from copyright headers

The information is already included in the COPYING file in the kernel
sources root directory, we don't want to modify all source files when
the FSF will move to a new address, and I'm tired of seeing the related
checkpatch.pl warnings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 335204dfb83b3105cf4a666d1ad024917831cbdc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: rcar-gen2: Add CA7 arch_timer initialization for r8a7794

On E2, the arch timer is hooked up to a different clock, and the CA7's arch
timer CNTVOFF register must be initialized.

Based on work by Hisashi Nakamura.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 9ce3fa6816c2fb59d128248c9b0509aef1c5dae7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: sh73a0: Remove wrapper sh73a0_init_delay()

sh73a0_init_delay() just calls shmobile_init_delay(), hence replace
calls to it by direct calls to shmobile_init_delay().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit dac95365dc2683df55c4e221e2f669a056863307)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7778: Remove wrapper r8a7778_init_delay()

r8a7778_init_delay() just calls shmobile_init_delay(), hence replace
calls to it by direct calls to shmobile_init_delay().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 92ee341e0b87551ab8838116782a4f3929108136)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a73a4: Remove empty r8a73a4_add_dt_devices

r8a73a4_add_dt_devices() no longer enables any devices
so remove it.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit fd3edcbe9f7bf24b13cadca7616f8e10bbe7e2b3)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: ape6evm-reference: Initialise CMT1 device using DT

Initialise CMT1 device using DT when booting ape6evm
using DT-reference.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit dfb846c95e3a7bb14f3aa61473aa4be0a8fe02ab)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a73a4: Rename cmt registration helper

Rename r8a7790_register_cmt() as r8a73a4_register_cmt() to
reflect name of the SoC in use. The use of r8a7790 appears
to be due to historical sharing of code from that SoC.
Shared code is no longer used.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 95e39682033b9940e17108098f08745b8938ab2c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Conflicts:
arch/arm/mach-shmobile/setup-r8a73a4.c

ARM: shmobile: r8a73a4: Add CMT1 node

This describes all of the CMT1 hardware of the r8a73a4.
The node is disabled and may be enabled as necessary by board DTS files.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit f7b65230019b9dacd69922f925933c8bde1f9ec2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: sh7372: Add shmobile_init_late()

Extend sh7372 SoC machine vector to include shmobile_init_late()
so Suspend-to-RAM and CPUIdle are setup as expected.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 27c1bb20d45830a64bf344cc1cb5e0a745e2d206)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Handle CA7 arch timer delay

Update the delay code to include arch timer checks
for CA7. From a arch timer availability perspective
CA7 should be treated same as CA15.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 27f3c70874fc1d114e26c807e900fec4b50b1217)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: armadillo800eva: Sort includes

Sorted includes seems to be the done thing these days.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit f4115f25c11790646351df243dae070a7cf80163)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: kzm9d dts: Add chosen/stdout-path

Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.

Note that we have to keep the "console=ttyS1,115200n81" parameter in
chosen/bootargs, else the console will use the default setting of 9600
baud.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 120f038cf04b95dc895cba503a7516ff75561438)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: kzm9g-reference dts: Add chosen/stdout-path

Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.
In addition, this will allow the PM domain code to find the PM domain
for the console device.

Note that we have to keep the "console=ttySC4" parameter in
chosen/bootargs, else we only get console messages on tty0.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 59ab5bff23020b6223857a460a39b9ec71d91cea)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: alt dts: Add chosen/stdout-path

Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.

Note that we have to keep the "console=ttySC0,38400" parameter in
chosen/bootargs, else the console will use the default setting of 115200
baud.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit b4a0f50cc70fef466e5b9935519b8213611e75bb)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch dts: Add chosen/stdout-path

Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.

Note that we have to keep the "console=" parameter in chosen/bootargs,
as this DTS is shared between legacy and multi-platform.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 17323b3615b54bd80ba7e9056c62266e7df24f27)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: henninger dts: Add chosen/stdout-path

Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.

Note that we have to keep the "console=ttySC0,38400" parameter in
chosen/bootargs, else the console will use the default setting of 115200
baud.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 8590e2d742c1687a733a90edc25ab0178d6a66fc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager dts: Add chosen/stdout-path

Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.

Note that we have to keep the "console=" parameter in chosen/bootargs,
as this DTS is shared between legacy and multi-platform.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit cf8558160747694f6011fe26aad79d50f3a40554)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: marzen dts: Add chosen/stdout-path

Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.

Note that we have to keep the "console=" parameter in chosen/bootargs,
as this DTS is shared between legacy and multi-platform.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 1877a35096a3aebd6e848b688f8a50b75882b7e3)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: bockw-reference dts: Add chosen/stdout-path

Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.

Remove the now-superfluous "console=" parameter from chosen/bootargs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 05988b32e3551ffd23e095b3e409db112bb84809)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: armadillo800eva dts: Add chosen/stdout-path

Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.
In addition, this will allow the PM domain code to find the PM domain
for the console device.

Note that we have to keep the "console=ttySC1" parameter in
chosen/bootargs, else we only get console messages on tty0, and because
this DTS is shared between legacy and multi-platform.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 2c32622c3f3f9c7e0d3480c1fc0a31a95e04dd91)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: ape6evm-reference dts: Add chosen/stdout-path

Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.
In addition, this will allow the PM domain code to find the PM domain
for the console device.

Remove the now-superfluous "console=" parameter from chosen/bootargs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 71787aaa6015c4b7f47126c053afd8f2bebb00d7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: genmai dts: Add chosen/stdout-path

Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.

Remove the now-superfluous "console=" parameter from chosen/bootargs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit a67898660278c5a2f1242daafad0fc7535ff0344)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: emev2 dtsi: Add uart* labels for easier referencing

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit e87aabaf24d660e3d4c68cfbd6aae0814b573375)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: emev2 dtsi: Use generic names for device nodes

smu -> clocks
sti -> timer
uart -> serial

All but "clocks" are defined in ePAPR v1.1.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 87982b2d9a75e10b357e6015f27b94011fc697be)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a73a4: sort dtsi file by address

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
[horms+renesas@verge.net.au: updated for removal of dma-multiplexer base
 address]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 7300505a9b60f245c227dadff26c8d12ffb64559)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: kzm9d: sort dts file by address

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit b97950cf04b32adf0f7521397c5fefa17208e71d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r7s72100: sort dtsi file by address

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 005980c0024ecd192c2eac3e3a9dcda1bedddffb)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a73a4: Remove spurious dma-multiplexer base addresses

As there is no reg property the dma-multiplexer nodes should
not include @...

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 6a8663f8bb5e3e2bf0d362744db844f2678d9b8b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

MAINTAINERS: Remove reference to shmobile / koelsch_defconfig

koelsch_defconfig has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit b33a8e137ef62ad8280a58c4aeadd1ffcae89598)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Remove genmai_defconfig from MAINTAINERS

The genmai defconfig file has been removed by
3ed27bd90d6d0c8b ("ARM: shmobile: genmai: remove defconfig")
so remove its entry in the MAINTAINERS accordingly.

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit f7b98477f613a69b74ba4a715856630cc6508c0d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Add DT and defconfigs to MAINTAINERS

There are a number of DT and defconfig files which
are maintained as part of shmobile but have not been
listed as such in the MAINTAINERS file. This creates
confusion from time to time.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 0b514fdb52073e348ade842355f37f6976768e44)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Merge tag 'backport/v3.14.24-ltsi-rc1/of-20141117' into backport/v3.14.24-ltsi-rc1/mach-shmobile

of: correct of_console_check()'s return value

The comments above of_console_check() say that it will return TRUE if it
registers a preferred console, but add_preferred_console() uses a
0-equals-success convention, so this leaves of_console_check() with an
inconsistent policy for its return values.

Fortunately, nobody was actually checking the return value of
of_console_check(), so this isn't significant at the moment.

But let's match the comments, so we're doing what we say.

Fixes: 3482f2c52b77 ('of: Create of_console_check() for selecting a console specified in /chosen')
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
(cherry picked from commit 5f74d8b7b8546255db6af45b017e9cbb18aed609)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

of: Enable console on serial ports specified by /chosen/stdout-path

If the devicetree specifies a serial port as a stdout device, then the
kernel can use it as the default console if nothing else was selected on
the command line. For any serial port that uses the uart_add_one_port()
feature, the uart_add_one_port() has all the information needed to
automatically enable the console device, which is what this patch does.

With this change applied, a device tree platform can be booted without
any console= parameters on the command line and the kernel will still be
able to determine its console.

Tested on QEMU Versatile model and i.MX

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
(cherry picked from commit a208ffd251d08ed7ba6bdf3ae1e423373fb12d3d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

of: Create of_console_check() for selecting a console specified in /chosen

The devicetree has a binding for specifying the console device in the
/chosen node, but the kernel doesn't use it consistently. This change
adds an API for testing if a device node is a console, and adds a
preferred console entry if it is.

At the same time this patch removes the of_device_is_stdout_path() API
since it is unused.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
(cherry picked from commit 3482f2c52b77bf6596e24aae82e204a0603eba66)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

of: Add support for ePAPR "stdout-path" property

ePAPR 1.1 defines the "stdout-path" property for specifying the console
device, but Linux currently only handles the older "linux,stdout-path"
property. This patch adds parsing for the new property name.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
(cherry picked from commit 676e1b2fcd9dbb47a59baac13d089621d22c68b8)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

[media] of: move common endpoint parsing to drivers/of

This patch adds a new struct of_endpoint which is then embedded in struct
v4l2_of_endpoint and contains the endpoint properties that are not V4L2
(or even media) specific: the port number, endpoint id, local device tree
node and remote endpoint phandle. of_graph_parse_endpoint parses those
properties and is used by v4l2_of_parse_endpoint, which just adds the
V4L2 MBUS information to the containing v4l2_of_endpoint structure.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
(cherry picked from commit f2a575f67695dcba9062acd666ae5aab2380b95c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Documentation: update .gitignore files

Add some missing files to .gitignore.
Push Documentation/.gitignore down into subdirectories.

Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
(cherry picked from commit c5e2a7e01269cd9839fef8a5c5ac258277b3b08f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Documentation: make functions static to avoid prototype warnings

Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
(cherry picked from commit 0421fc837c822e86c76884a30a9155e512a5a66a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7740 legacy: Fix copied bug in comment

The corresponding bug in pm-sh7372.c was fixed in commit
70fe7b24672a988f ("ARM: shmobile: Do not access sh7372 A4S domain
internals directly").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 8237f9e5c38098aeb8570a77bacd0fe0ebc61dfa)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7794: Reserve memory as other R-Car Gen2 SoCs

Other R-Car Gen2 SoCs such as r8a7790 and r8a7791 reserve
the top 256 MiB of memory for use with CMA. Adjust the
board-less r8a7794 code to do the same.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 299e14734c22994e69c913e66ab1f4bb56423f5d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a73a4 dtsi: Add SoC-specific irqc compatible property

The interrupt controller used the generic compatible property only.
Add the SoC-specific one, to make it future proof.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 34abee398119acaed0b1fb4318eca5b364cf74e2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

drm/rcar-du: Use struct videomode in platform data

In preparation for DT support where panel timings will be described by a
DRM-agnostic video mode, replace the struct drm_mode_modeinfo instance
in the panel platform data with a struct videomode.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit 1d46fea7d091f9dc2d4fd3fcb9f0117ca288f9a5)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7794: Remove unnecessary #ifdef CONFIG_USE_OF

The r8a7794 support is always compiled using ARCH_MULTIPLATFORM which
selects USE_OF. So #ifdef CONFIG_USE_OF is unnecessary.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 1370078db37de2aa5e906ae2b5dbbb6ba289adb4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Enable r8a7794 SoC in shmobile_defconfig

Support for the r8a7794 was recently added.
Enable it in the shmobile_defconfig to increase build coverage.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 7d984c95723725d26f3961c1655c20256f0affdf)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: remove MMC_CAP2_NO_MULTI_READ from lager

sh_mobile_sdhi cares multiblock read bug.
remove MMC_CAP2_NO_MULTI_READ flag from board code

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
(cherry picked from commit 9674e9545382153d6a78bb97915ba8e64c1fdf9f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: remove MMC_CAP2_NO_MULTI_READ from koelsch

sh_mobile_sdhi cares multiblock read bug.
remove MMC_CAP2_NO_MULTI_READ flag from board code

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
(cherry picked from commit b9409687a8dad8b7207f05c62b9c87d2a766473b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>