platform/kernel/linux-rpi.git
6 years agoata: Fix ZBC_OUT command block check
Damien Le Moal [Tue, 26 Jun 2018 11:56:54 +0000 (20:56 +0900)]
ata: Fix ZBC_OUT command block check

The block (LBA) specified must not exceed the last addressable LBA,
which is dev->nr_sectors - 1. So fix the correct check is
"if (block >= dev->n_sectors)" and not "if (block > dev->n_sectords)".

Additionally, the asc/ascq to return for an LBA that is not a zone start
LBA should be ILLEGAL REQUEST, regardless if the bad LBA is out of
range.

Reported-by: David Butterfield <david.butterfield@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
6 years agoahci: Add Intel Ice Lake LP PCI ID
Mika Westerberg [Wed, 27 Jun 2018 12:15:40 +0000 (15:15 +0300)]
ahci: Add Intel Ice Lake LP PCI ID

This should also be using the default LPM policy for mobile chipsets so
add the PCI ID to the driver list of supported devices.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
6 years agoahci: Disable LPM on Lenovo 50 series laptops with a too old BIOS
Hans de Goede [Sun, 1 Jul 2018 10:15:46 +0000 (12:15 +0200)]
ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOS

There have been several reports of LPM related hard freezes about once
a day on multiple Lenovo 50 series models. Strange enough these reports
where not disk model specific as LPM issues usually are and some users
with the exact same disk + laptop where seeing them while other users
where not seeing these issues.

It turns out that enabling LPM triggers a firmware bug somewhere, which
has been fixed in later BIOS versions.

This commit adds a new ahci_broken_lpm() function and a new ATA_FLAG_NO_LPM
for dealing with this.

The ahci_broken_lpm() function contains DMI match info for the 4 models
which are known to be affected by this and the DMI BIOS date field for
known good BIOS versions. If the BIOS date is older then the one in the
table LPM will be disabled and a warning will be printed.

Note the BIOS dates are for known good versions, some older versions may
work too, but we don't know for sure, the table is using dates from BIOS
versions for which users have confirmed that upgrading to that version
makes the problem go away.

Unfortunately I've been unable to get hold of the reporter who reported
that BIOS version 2.35 fixed the problems on the W541 for him. I've been
able to verify the DMI_SYS_VENDOR and DMI_PRODUCT_VERSION from an older
dmidecode, but I don't know the exact BIOS date as reported in the DMI.
Lenovo keeps a changelog with dates in their release notes, but the
dates there are the release dates not the build dates which are in DMI.
So I've chosen to set the date to which we compare to one day past the
release date of the 2.34 BIOS. I plan to fix this with a follow up
commit once I've the necessary info.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
6 years agosata_nv: remove redundant pointers sdev0 and sdev1
Colin Ian King [Mon, 2 Jul 2018 07:30:22 +0000 (08:30 +0100)]
sata_nv: remove redundant pointers sdev0 and sdev1

Pointers sdev0 and sdev1 are being assigned but are never used hence they
are redundant and can be removed.

Cleans up clang warnings:
warning: variable 'sdev0' set but not used [-Wunused-but-set-variable]
warning: variable 'sdev1' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
6 years agosata_fsl: remove dead code in tag retrieval
Jens Axboe [Tue, 19 Jun 2018 16:12:51 +0000 (10:12 -0600)]
sata_fsl: remove dead code in tag retrieval

We can never pass in the internal tag to this helper, it'll
always be the hardware tag. So there's no need to check and
do an internal translation of that tag.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tejun Heo <tj@kernel.org>
6 years agosata_fsl: convert to command iterator
Jens Axboe [Tue, 19 Jun 2018 16:12:50 +0000 (10:12 -0600)]
sata_fsl: convert to command iterator

We need to iterate all commands, including the internal one,
for ATAPI error handling.

Fixes: 28361c403683 ("libata: add extra internal command")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tejun Heo <tj@kernel.org>
6 years agolibata: convert eh to command iterators
Jens Axboe [Tue, 19 Jun 2018 16:12:49 +0000 (10:12 -0600)]
libata: convert eh to command iterators

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tejun Heo <tj@kernel.org>
6 years agolibata: add command iterator helpers
Jens Axboe [Tue, 19 Jun 2018 16:12:48 +0000 (10:12 -0600)]
libata: add command iterator helpers

Now that we have the internal tag as a special (higher) value tag,
it gets a bit tricky to iterate the internal commands as some loops
will exceed ATA_MAX_QUEUE. Add explicit helpers for iterating pending
commands, both inflight and internal.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tejun Heo <tj@kernel.org>
6 years agoata: ahci_mvebu: ahci_mvebu_stop_engine() can be static
Wei Yongjun [Wed, 6 Jun 2018 06:56:34 +0000 (06:56 +0000)]
ata: ahci_mvebu: ahci_mvebu_stop_engine() can be static

Fixes the following sparse warning:

drivers/ata/ahci_mvebu.c:85:5: warning:
 symbol 'ahci_mvebu_stop_engine' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
6 years agolibahci: Fix possible Spectre-v1 pmp indexing in ahci_led_store()
John Garry [Fri, 8 Jun 2018 10:26:33 +0000 (18:26 +0800)]
libahci: Fix possible Spectre-v1 pmp indexing in ahci_led_store()

Currently smatch warns of possible Spectre-V1 issue in ahci_led_store():
drivers/ata/libahci.c:1150 ahci_led_store() warn: potential spectre issue 'pp->em_priv' (local cap)

Userspace controls @pmp from following callchain:
em_message->store()
->ata_scsi_em_message_store()
-->ap->ops->em_store()
--->ahci_led_store()

After the mask+shift @pmp is effectively an 8b value, which is used to
index into an array of length 8, so sanitize the array index.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
6 years agoMerge tag '4.18-rc1-more-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Mon, 18 Jun 2018 05:28:19 +0000 (14:28 +0900)]
Merge tag '4.18-rc1-more-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Misc SMB3 fixes, including particularly important ones for signing,
  some minor documentation and debug improvements and another posix
  smb3.11 fix"

* tag '4.18-rc1-more-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix invalid check in __cifs_calc_signature()
  cifs: Use correct packet length in SMB2_TRANSFORM header
  smb3: fix corrupt path in subdirs on smb311 with posix
  smb3: do not display empty interface list
  smb3: Fix mode on mkdir on smb311 mounts
  cifs: Fix kernel oops when traceSMB is enabled
  CIFS: dump every session iface info
  CIFS: parse and store info on iface queries
  CIFS: add iface info to struct cifs_ses
  CIFS: complete PDU definitions for interface queries
  CIFS: move default port definitions to cifsglob.h
  cifs: Fix encryption/signing
  cifs: update __smb_send_rqst() to take an array of requests
  cifs: remove smb2_send_recv()
  cifs: push rfc1002 generation down the stack
  smb3: increase initial number of credits requested to allow write
  cifs: minor documentation updates
  cifs: add lease tracking to the cached root fid
  smb3: note that smb3.11 posix extensions mount option is experimental

6 years agoMerge branch 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvar...
Linus Torvalds [Mon, 18 Jun 2018 04:43:09 +0000 (13:43 +0900)]
Merge branch 'dmi-for-linus' of git://git./linux/kernel/git/jdelvare/staging

Pull dmi update from Jean Delvare:
 "Expose SKU ID string as a DMI attribute"

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi: Add access to the SKU ID string

6 years agoFix Documentation build due to rename of main.c to mtrr.c
Randy Dunlap [Sun, 17 Jun 2018 00:09:41 +0000 (17:09 -0700)]
Fix Documentation build due to rename of main.c to mtrr.c

This fixes this documentation build error that is due to a file rename:

  Error: Cannot open file ../arch/x86/kernel/cpu/mtrr/main.c

Fixes: 0afe832e55a7 ("Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
6 years agofirmware: dmi: Add access to the SKU ID string
Simon Glass [Sun, 17 Jun 2018 12:09:42 +0000 (14:09 +0200)]
firmware: dmi: Add access to the SKU ID string

This is used in some systems from user space for determining the identity
of the device.

Expose this as a file so that that user-space tools don't need to read
from /sys/firmware/dmi/tables/DMI

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
6 years agoLinux 4.18-rc1
Linus Torvalds [Sat, 16 Jun 2018 23:04:49 +0000 (08:04 +0900)]
Linux 4.18-rc1

6 years agoMerge tag 'for-linus-20180616' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 16 Jun 2018 20:37:55 +0000 (05:37 +0900)]
Merge tag 'for-linus-20180616' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A collection of fixes that should go into -rc1. This contains:

   - bsg_open vs bsg_unregister race fix (Anatoliy)

   - NVMe pull request from Christoph, with fixes for regressions in
     this window, FC connect/reconnect path code unification, and a
     trace point addition.

   - timeout fix (Christoph)

   - remove a few unused functions (Christoph)

   - blk-mq tag_set reinit fix (Roman)"

* tag 'for-linus-20180616' of git://git.kernel.dk/linux-block:
  bsg: fix race of bsg_open and bsg_unregister
  block: remov blk_queue_invalidate_tags
  nvme-fabrics: fix and refine state checks in __nvmf_check_ready
  nvme-fabrics: handle the admin-only case properly in nvmf_check_ready
  nvme-fabrics: refactor queue ready check
  blk-mq: remove blk_mq_tagset_iter
  nvme: remove nvme_reinit_tagset
  nvme-fc: fix nulling of queue data on reconnect
  nvme-fc: remove reinit_request routine
  blk-mq: don't time out requests again that are in the timeout handler
  nvme-fc: change controllers first connect to use reconnect path
  nvme: don't rely on the changed namespace list log
  nvmet: free smart-log buffer after use
  nvme-rdma: fix error flow during mapping request data
  nvme: add bio remapping tracepoint
  nvme: fix NULL pointer dereference in nvme_init_subsystem
  blk-mq: reinit q->tag_set_list entry only after grace period

6 years agoMerge tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental
Linus Torvalds [Sat, 16 Jun 2018 20:25:18 +0000 (05:25 +0900)]
Merge tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental

Pull documentation fixes from Mauro Carvalho Chehab:
 "This solves a series of broken links for files under Documentation,
  and improves a script meant to detect such broken links (see
  scripts/documentation-file-ref-check).

  The changes on this series are:

   - can.rst: fix a footnote reference;

   - crypto_engine.rst: Fix two parsing warnings;

   - Fix a lot of broken references to Documentation/*;

   - improve the scripts/documentation-file-ref-check script, in order
     to help detecting/fixing broken references, preventing
     false-positives.

  After this patch series, only 33 broken references to doc files are
  detected by scripts/documentation-file-ref-check"

* tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental: (26 commits)
  fix a series of Documentation/ broken file name references
  Documentation: rstFlatTable.py: fix a broken reference
  ABI: sysfs-devices-system-cpu: remove a broken reference
  devicetree: fix a series of wrong file references
  devicetree: fix name of pinctrl-bindings.txt
  devicetree: fix some bindings file names
  MAINTAINERS: fix location of DT npcm files
  MAINTAINERS: fix location of some display DT bindings
  kernel-parameters.txt: fix pointers to sound parameters
  bindings: nvmem/zii: Fix location of nvmem.txt
  docs: Fix more broken references
  scripts/documentation-file-ref-check: check tools/*/Documentation
  scripts/documentation-file-ref-check: get rid of false-positives
  scripts/documentation-file-ref-check: hint: dash or underline
  scripts/documentation-file-ref-check: add a fix logic for DT
  scripts/documentation-file-ref-check: accept more wildcards at filenames
  scripts/documentation-file-ref-check: fix help message
  media: max2175: fix location of driver's companion documentation
  media: v4l: fix broken video4linux docs locations
  media: dvb: point to the location of the old README.dvb-usb file
  ...

6 years agoMerge tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 16 Jun 2018 20:06:18 +0000 (05:06 +0900)]
Merge tag 'fsnotify_for_v4.18-rc1' of git://git./linux/kernel/git/jack/linux-fs

Pull fsnotify updates from Jan Kara:
 "fsnotify cleanups unifying handling of different watch types.

  This is the shortened fsnotify series from Amir with the last five
  patches pulled out. Amir has modified those patches to not change
  struct inode but obviously it's too late for those to go into this
  merge window"

* tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: add fsnotify_add_inode_mark() wrappers
  fanotify: generalize fanotify_should_send_event()
  fsnotify: generalize send_to_group()
  fsnotify: generalize iteration of marks by object type
  fsnotify: introduce marks iteration helpers
  fsnotify: remove redundant arguments to handle_event()
  fsnotify: use type id to identify connector object type

6 years agoMerge tag 'fbdev-v4.18' of git://github.com/bzolnier/linux
Linus Torvalds [Sat, 16 Jun 2018 20:00:24 +0000 (05:00 +0900)]
Merge tag 'fbdev-v4.18' of git://github.com/bzolnier/linux

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "There is nothing really major here, few small fixes, some cleanups and
  dead drivers removal:

   - mark omapfb drivers as orphans in MAINTAINERS file (Tomi Valkeinen)

   - add missing module license tags to omap/omapfb driver (Arnd
     Bergmann)

   - add missing GPIOLIB dependendy to omap2/omapfb driver (Arnd
     Bergmann)

   - convert savagefb, aty128fb & radeonfb drivers to use msleep & co.
     (Jia-Ju Bai)

   - allow COMPILE_TEST build for viafb driver (media part was reviewed
     by media subsystem Maintainer)

   - remove unused MERAM support from sh_mobile_lcdcfb and shmob-drm
     drivers (drm parts were acked by shmob-drm driver Maintainer)

   - remove unused auo_k190xfb drivers

   - misc cleanups (Souptick Joarder, Wolfram Sang, Markus Elfring, Andy
     Shevchenko, Colin Ian King)"

* tag 'fbdev-v4.18' of git://github.com/bzolnier/linux: (26 commits)
  fb_omap2: add gpiolib dependency
  video/omap: add module license tags
  MAINTAINERS: make omapfb orphan
  video: fbdev: pxafb: match_string() conversion fixup
  video: fbdev: nvidia: fix spelling mistake: "scaleing" -> "scaling"
  video: fbdev: fix spelling mistake: "frambuffer" -> "framebuffer"
  video: fbdev: pxafb: Convert to use match_string() helper
  video: fbdev: via: allow COMPILE_TEST build
  video: fbdev: remove unused sh_mobile_meram driver
  drm: shmobile: remove unused MERAM support
  video: fbdev: sh_mobile_lcdcfb: remove unused MERAM support
  video: fbdev: remove unused auo_k190xfb drivers
  video: omap: Improve a size determination in omapfb_do_probe()
  video: sm501fb: Improve a size determination in sm501fb_probe()
  video: fbdev-MMP: Improve a size determination in path_init()
  video: fbdev-MMP: Delete an error message for a failed memory allocation in two functions
  video: auo_k190x: Delete an error message for a failed memory allocation in auok190x_common_probe()
  video: sh_mobile_lcdcfb: Delete an error message for a failed memory allocation in two functions
  video: sh_mobile_meram: Delete an error message for a failed memory allocation in sh_mobile_meram_probe()
  video: fbdev: sh_mobile_meram: Drop SUPERH platform dependency
  ...

6 years agoMerge branch 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Sat, 16 Jun 2018 07:32:04 +0000 (16:32 +0900)]
Merge branch 'afs-proc' of git://git./linux/kernel/git/viro/vfs

Pull AFS updates from Al Viro:
 "Assorted AFS stuff - ended up in vfs.git since most of that consists
  of David's AFS-related followups to Christoph's procfs series"

* 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  afs: Optimise callback breaking by not repeating volume lookup
  afs: Display manually added cells in dynamic root mount
  afs: Enable IPv6 DNS lookups
  afs: Show all of a server's addresses in /proc/fs/afs/servers
  afs: Handle CONFIG_PROC_FS=n
  proc: Make inline name size calculation automatic
  afs: Implement network namespacing
  afs: Mark afs_net::ws_cell as __rcu and set using rcu functions
  afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus()
  proc: Add a way to make network proc files writable
  afs: Rearrange fs/afs/proc.c to remove remaining predeclarations.
  afs: Rearrange fs/afs/proc.c to move the show routines up
  afs: Rearrange fs/afs/proc.c by moving fops and open functions down
  afs: Move /proc management functions to the end of the file

6 years agoMerge branch 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Sat, 16 Jun 2018 07:21:50 +0000 (16:21 +0900)]
Merge branch 'work.compat' of git://git./linux/kernel/git/viro/vfs

Pull compat updates from Al Viro:
 "Some biarch patches - getting rid of assorted (mis)uses of
  compat_alloc_user_space().

  Not much in that area this cycle..."

* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  orangefs: simplify compat ioctl handling
  signalfd: lift sigmask copyin and size checks to callers of do_signalfd4()
  vmsplice(): lift importing iovec into vmsplice(2) and compat counterpart

6 years agoMerge branch 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Sat, 16 Jun 2018 07:11:40 +0000 (16:11 +0900)]
Merge branch 'work.aio' of git://git./linux/kernel/git/viro/vfs

Pull aio fixes from Al Viro:
 "Assorted AIO followups and fixes"

* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  eventpoll: switch to ->poll_mask
  aio: only return events requested in poll_mask() for IOCB_CMD_POLL
  eventfd: only return events requested in poll_mask()
  aio: mark __aio_sigset::sigmask const

6 years agocifs: Fix invalid check in __cifs_calc_signature()
Paulo Alcantara [Fri, 15 Jun 2018 18:58:00 +0000 (15:58 -0300)]
cifs: Fix invalid check in __cifs_calc_signature()

The following check would never evaluate to true:
  > if (i == 0 && iov[0].iov_len <= 4)

Because 'i' always starts at 1.

This patch fixes it and also move the header checks outside the for loop
- which makes more sense.

Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
6 years agocifs: Use correct packet length in SMB2_TRANSFORM header
Paulo Alcantara [Fri, 15 Jun 2018 13:22:44 +0000 (10:22 -0300)]
cifs: Use correct packet length in SMB2_TRANSFORM header

In smb3_init_transform_rq(), 'orig_len' was only counting the request
length, but forgot to count any data pages in the request.

Writing or creating files with the 'seal' mount option was broken.

In addition, do some code refactoring by exporting smb2_rqst_len() to
calculate the appropriate packet size and avoid duplicating the same
calculation all over the code.

The start of the io vector is either the rfc1002 length (4 bytes) or a
SMB2 header which is always > 4. Use this fact to check and skip the
rfc1002 length if requested.

Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
6 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 15 Jun 2018 22:39:34 +0000 (07:39 +0900)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Various netfilter fixlets from Pablo and the netfilter team.

 2) Fix regression in IPVS caused by lack of PMTU exceptions on local
    routes in ipv6, from Julian Anastasov.

 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia.

 4) Don't crash on poll in TLS, from Daniel Borkmann.

 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things
    including Avahi mDNS. From Bart Van Assche.

 6) Missing of_node_put in qcom/emac driver, from Yue Haibing.

 7) We lack checking of the TCP checking in one special case during SYN
    receive, from Frank van der Linden.

 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg.

 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman.

10) Must grab HW caps before doing quirk checks in stmmac driver, from
    Jose Abreu.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
  net: stmmac: Run HWIF Quirks after getting HW caps
  neighbour: skip NTF_EXT_LEARNED entries during forced gc
  net: cxgb3: add error handling for sysfs_create_group
  tls: fix waitall behavior in tls_sw_recvmsg
  tls: fix use-after-free in tls_push_record
  l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
  l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
  mlxsw: spectrum_switchdev: Fix port_vlan refcounting
  mlxsw: spectrum_router: Align with new route replace logic
  mlxsw: spectrum_router: Allow appending to dev-only routes
  ipv6: Only emit append events for appended routes
  stmmac: added support for 802.1ad vlan stripping
  cfg80211: fix rcu in cfg80211_unregister_wdev
  mac80211: Move up init of TXQs
  mac80211_hwsim: fix module init error paths
  cfg80211: initialize sinfo in cfg80211_get_station
  nl80211: fix some kernel doc tag mistakes
  hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload
  rds: avoid unenecessary cong_update in loop transport
  l2tp: clean up stale tunnel or session in pppol2tp_connect's error path
  ...

6 years agoMerge tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu...
Linus Torvalds [Fri, 15 Jun 2018 22:36:39 +0000 (07:36 +0900)]
Merge tag 'modules-for-v4.18' of git://git./linux/kernel/git/jeyu/linux

Pull module updates from Jessica Yu:
 "Minor code cleanup and also allow sig_enforce param to be shown in
  sysfs with CONFIG_MODULE_SIG_FORCE"

* tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Allow to always show the status of modsign
  module: Do not access sig_enforce directly

6 years agoMerge branch 'for-linus-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 15 Jun 2018 21:50:51 +0000 (06:50 +0900)]
Merge branch 'for-linus-4.18-rc1' of git://git./linux/kernel/git/rw/uml

Pull uml updates from Richard Weinberger:
 "Minor updates for UML:

   - fixes for our new vector network driver by Anton

   - initcall cleanup by Alexander

   - We have a new mailinglist, sourceforge.net sucks"

* 'for-linus-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Fix raw interface options
  um: Fix initialization of vector queues
  um: remove uml initcalls
  um: Update mailing list address

6 years agoMerge tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Fri, 15 Jun 2018 21:42:43 +0000 (06:42 +0900)]
Merge tag 'riscv-for-linus-4.18-merge_window' of git://git./linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains some small RISC-V updates I'd like to target for 4.18.

  They are all fairly small this time. Here's a short summary, there's
  more info in the commits/merges:

   - a fix to __clear_user to respect the passed arguments.

   - enough support for the perf subsystem to work with RISC-V's ISA
     defined performance counters.

   - support for sparse and cleanups suggested by it.

   - support for R_RISCV_32 (a relocation, not the 32-bit ISA).

   - some MAINTAINERS cleanups.

   - the addition of CONFIG_HVC_RISCV_SBI to our defconfig, as it's
     always present.

  I've given these a simple build+boot test"

* tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig
  RISC-V: Handle R_RISCV_32 in modules
  riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't set
  riscv: add riscv-specific predefines to CHECKFLAGS
  riscv: split the declaration of __copy_user
  riscv: no __user for probe_kernel_address()
  riscv: use NULL instead of a plain 0
  perf: riscv: Add Document for Future Porting Guide
  perf: riscv: preliminary RISC-V support
  MAINTAINERS: Update Albert's email, he's back at Berkeley
  MAINTAINERS: Add myself as a maintainer for SiFive's drivers
  riscv: Fix the bug in memory access fixup code

6 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Fri, 15 Jun 2018 21:37:04 +0000 (06:37 +0900)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull more kvm updates from Paolo Bonzini:
 "Mostly the PPC part of the release, but also switching to Arnd's fix
  for the hyperv config issue and a typo fix.

  Main PPC changes:

   - reimplement the MMIO instruction emulation

   - transactional memory support for PR KVM

   - improve radix page table handling"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (63 commits)
  KVM: x86: VMX: redo fix for link error without CONFIG_HYPERV
  KVM: x86: fix typo at kvm_arch_hardware_setup comment
  KVM: PPC: Book3S PR: Fix failure status setting in tabort. emulation
  KVM: PPC: Book3S PR: Enable use on POWER9 bare-metal hosts in HPT mode
  KVM: PPC: Book3S PR: Don't let PAPR guest set MSR hypervisor bit
  KVM: PPC: Book3S PR: Fix failure status setting in treclaim. emulation
  KVM: PPC: Book3S PR: Fix MSR setting when delivering interrupts
  KVM: PPC: Book3S PR: Handle additional interrupt types
  KVM: PPC: Book3S PR: Enable kvmppc_get/set_one_reg_pr() for HTM registers
  KVM: PPC: Book3S: Remove load/put vcpu for KVM_GET_REGS/KVM_SET_REGS
  KVM: PPC: Remove load/put vcpu for KVM_GET/SET_ONE_REG ioctl
  KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl
  KVM: PPC: Book3S PR: Enable HTM for PR KVM for KVM_CHECK_EXTENSION ioctl
  KVM: PPC: Book3S PR: Support TAR handling for PR KVM HTM
  KVM: PPC: Book3S PR: Add guard code to prevent returning to guest with PR=0 and Transactional state
  KVM: PPC: Book3S PR: Add emulation for tabort. in privileged state
  KVM: PPC: Book3S PR: Add emulation for trechkpt.
  KVM: PPC: Book3S PR: Add emulation for treclaim.
  KVM: PPC: Book3S PR: Restore NV regs after emulating mfspr from TM SPRs
  KVM: PPC: Book3S PR: Always fail transactions in guest privileged state
  ...

6 years agoMerge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Linus Torvalds [Fri, 15 Jun 2018 21:35:02 +0000 (06:35 +0900)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:
 "virtio, vhost: features, fixes

   - PCI virtual function support for virtio

   - DMA barriers for virtio strong barriers

   - bugfixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio: update the comments for transport features
  virtio_pci: support enabling VFs
  vhost: fix info leak due to uninitialized memory
  virtio_ring: switch to dma_XX barriers for rpmsg

6 years agofix a series of Documentation/ broken file name references
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:34:32 +0000 (12:34 -0300)]
fix a series of Documentation/ broken file name references

As files move around, their previous links break. Fix the
references for them.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoDocumentation: rstFlatTable.py: fix a broken reference
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:33:06 +0000 (12:33 -0300)]
Documentation: rstFlatTable.py: fix a broken reference

The old HOWTO was removed a long time ago. The flat table
version is not metioned elsewhere, so just get rid of the
text.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoABI: sysfs-devices-system-cpu: remove a broken reference
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:32:05 +0000 (12:32 -0300)]
ABI: sysfs-devices-system-cpu: remove a broken reference

This file doesn't exist anymore:
Documentation/cpu-freq/user-guide.txt

As the ABI already points to Documentation/cpu-freq, just
remove the broken link and the associated text.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodevicetree: fix a series of wrong file references
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:30:30 +0000 (12:30 -0300)]
devicetree: fix a series of wrong file references

As files got renamed, their references broke.

Manually fix a series of broken refs at the DT bindings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodevicetree: fix name of pinctrl-bindings.txt
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:24:41 +0000 (12:24 -0300)]
devicetree: fix name of pinctrl-bindings.txt

Rename:
pinctrl-binding.txt -> pinctrl-bindings.txt

In order to match the current name of this file.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodevicetree: fix some bindings file names
Mauro Carvalho Chehab [Thu, 14 Jun 2018 12:39:01 +0000 (09:39 -0300)]
devicetree: fix some bindings file names

There were some file movements that changed the location for
some DT bindings. Fix them with:
scripts/documentation-file-ref-check --fix

After manually checking if the new file makes sense.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoMAINTAINERS: fix location of DT npcm files
Mauro Carvalho Chehab [Thu, 14 Jun 2018 11:59:37 +0000 (08:59 -0300)]
MAINTAINERS: fix location of DT npcm files

The specified locations are not right. Fix the wildcard logic
to point to the correct directories.

Without that, get-maintainer won't get things right:

$ ./scripts/get_maintainer.pl --no-git-fallback --no-r --no-n --no-l -f Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
mark.rutland@arm.com (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)

After the patch, it will properly point to NPCM arch maintainers:
$ ./scripts/get_maintainer.pl --no-git-fallback --no-r --no-n --no-l -f Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
avifishman70@gmail.com (supporter:ARM/NUVOTON NPCM ARCHITECTURE)
tmaimon77@gmail.com (supporter:ARM/NUVOTON NPCM ARCHITECTURE)
robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
mark.rutland@arm.com (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)

Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Cc: Patrick Venture <venture@google.com>
Cc: Nancy Yuen <yuenn@google.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoMAINTAINERS: fix location of some display DT bindings
Mauro Carvalho Chehab [Thu, 14 Jun 2018 11:01:00 +0000 (08:01 -0300)]
MAINTAINERS: fix location of some display DT bindings

Those files got a manufacturer's name prepended and were moved around.
Adjust their references accordingly.

Also, due those movements, Documentation/devicetree/bindings/video
doesn't exist anymore.

Cc: David Airlie <airlied@linux.ie>
Cc: David Lechner <david@lechnology.com>
Cc: Peter Senna Tschudin <peter.senna@collabora.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@nxp.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agokernel-parameters.txt: fix pointers to sound parameters
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:43:07 +0000 (07:43 -0300)]
kernel-parameters.txt: fix pointers to sound parameters

The alsa parameters file was renamed to alsa-configuration.rst.

With regards to OSS, it got retired as a hole by  at changeset
727dede0ba8a ("sound: Retire OSS"). So, it doesn't make sense
to keep mentioning it at kernel-parameters.txt.

Fixes: 727dede0ba8a ("sound: Retire OSS")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agobindings: nvmem/zii: Fix location of nvmem.txt
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:18:45 +0000 (07:18 -0300)]
bindings: nvmem/zii: Fix location of nvmem.txt

The location pointed there is missing "bindings/" on its path.

Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodocs: Fix more broken references
Mauro Carvalho Chehab [Tue, 8 May 2018 18:14:57 +0000 (15:14 -0300)]
docs: Fix more broken references

As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix

Manually checked that produced results are valid.

Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoscripts/documentation-file-ref-check: check tools/*/Documentation
Mauro Carvalho Chehab [Thu, 14 Jun 2018 14:06:08 +0000 (11:06 -0300)]
scripts/documentation-file-ref-check: check tools/*/Documentation

Some files, like tools/memory-model/README has references to
a Documentation file that is locale to it. Handle references
that are relative to them too.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoscripts/documentation-file-ref-check: get rid of false-positives
Mauro Carvalho Chehab [Thu, 14 Jun 2018 13:47:29 +0000 (10:47 -0300)]
scripts/documentation-file-ref-check: get rid of false-positives

Now that the number of broken refs are smaller, improve the logic
that gets rid of false-positives.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoscripts/documentation-file-ref-check: hint: dash or underline
Mauro Carvalho Chehab [Thu, 14 Jun 2018 13:14:54 +0000 (10:14 -0300)]
scripts/documentation-file-ref-check: hint: dash or underline

Sometimes, people use dash instead of underline or vice-versa.
Try to autocorrect it.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoscripts/documentation-file-ref-check: add a fix logic for DT
Mauro Carvalho Chehab [Thu, 14 Jun 2018 12:36:35 +0000 (09:36 -0300)]
scripts/documentation-file-ref-check: add a fix logic for DT

There are several links broken due to DT file movements. Add
a hint logic to seek for those changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoscripts/documentation-file-ref-check: accept more wildcards at filenames
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:48:22 +0000 (07:48 -0300)]
scripts/documentation-file-ref-check: accept more wildcards at filenames

at MAINTAINERS, some filename paths use '?' and things like [7,9].
So, accept more wildcards, in order to avoid false-positives.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoscripts/documentation-file-ref-check: fix help message
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:11:02 +0000 (07:11 -0300)]
scripts/documentation-file-ref-check: fix help message

The name of the --fix option was renamed, but it was not
changed at the quick help message.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agomedia: max2175: fix location of driver's companion documentation
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:34:51 +0000 (07:34 -0300)]
media: max2175: fix location of driver's companion documentation

There's a missing ".rst" at the doc's file name.

Acked-by: Ramesh Shanmugasundaram <Ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agomedia: v4l: fix broken video4linux docs locations
Mauro Carvalho Chehab [Tue, 8 May 2018 22:41:44 +0000 (19:41 -0300)]
media: v4l: fix broken video4linux docs locations

There are several places pointing to old documentation files:

  Documentation/video4linux/API.html
  Documentation/video4linux/bttv/
  Documentation/video4linux/cx2341x/fw-encoder-api.txt
  Documentation/video4linux/m5602.txt
  Documentation/video4linux/v4l2-framework.txt
  Documentation/video4linux/videobuf
  Documentation/video4linux/Zoran

Make them point to the new location where available, removing
otherwise.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agomedia: dvb: point to the location of the old README.dvb-usb file
Mauro Carvalho Chehab [Tue, 8 May 2018 21:29:30 +0000 (18:29 -0300)]
media: dvb: point to the location of the old README.dvb-usb file

This file got renamed, but the references still point to the
old place.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agomedia: dvb: fix location of get_dvb_firmware script
Mauro Carvalho Chehab [Tue, 8 May 2018 21:10:05 +0000 (18:10 -0300)]
media: dvb: fix location of get_dvb_firmware script

This script was moved out of Documentation/dvb, but the
links weren't updated.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodocs: Fix some broken references
Mauro Carvalho Chehab [Tue, 8 May 2018 18:14:57 +0000 (15:14 -0300)]
docs: Fix some broken references

As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix

Manually checked if the produced result is valid, removing a few
false-positives.

Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodocs: fix broken references with multiple hints
Mauro Carvalho Chehab [Tue, 8 May 2018 21:54:36 +0000 (18:54 -0300)]
docs: fix broken references with multiple hints

The script:
./scripts/documentation-file-ref-check --fix

Gives multiple hints for broken references on some files.
Manually use the one that applies for some files.

Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agonet: stmmac: Run HWIF Quirks after getting HW caps
Jose Abreu [Fri, 15 Jun 2018 15:17:27 +0000 (16:17 +0100)]
net: stmmac: Run HWIF Quirks after getting HW caps

Currently we were running HWIF quirks before getting HW capabilities.
This is not right because some HWIF callbacks depend on HW caps.

Lets save the quirks callback and use it in a later stage.

This fixes Altera socfpga.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Fixes: 5f0456b43140 ("net: stmmac: Implement logic to automatically select HW Interface")
Reported-by: Dinh Nguyen <dinh.linux@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoneighbour: skip NTF_EXT_LEARNED entries during forced gc
Roopa Prabhu [Wed, 13 Jun 2018 04:26:10 +0000 (21:26 -0700)]
neighbour: skip NTF_EXT_LEARNED entries during forced gc

Commit 9ce33e46531d ("neighbour: support for NTF_EXT_LEARNED flag")
added support for NTF_EXT_LEARNED for neighbour entries.
NTF_EXT_LEARNED entries are neigh entries managed by control
plane (eg: Ethernet VPN implementation in FRR routing suite).
Periodic gc already excludes these entries. This patch extends
it to forced gc which the earlier patch missed.

Fixes: 9ce33e46531d ("neighbour: support for NTF_EXT_LEARNED flag")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: cxgb3: add error handling for sysfs_create_group
Zhouyang Jia [Fri, 15 Jun 2018 03:06:17 +0000 (11:06 +0800)]
net: cxgb3: add error handling for sysfs_create_group

When sysfs_create_group fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling sysfs_create_group.

Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'tls-fixes'
David S. Miller [Fri, 15 Jun 2018 16:14:31 +0000 (09:14 -0700)]
Merge branch 'tls-fixes'

Daniel Borkmann says:

====================
Two tls fixes

First one is syzkaller trigered uaf and second one noticed
while writing test code with tls ulp. For details please see
individual patches.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotls: fix waitall behavior in tls_sw_recvmsg
Daniel Borkmann [Fri, 15 Jun 2018 01:07:46 +0000 (03:07 +0200)]
tls: fix waitall behavior in tls_sw_recvmsg

Current behavior in tls_sw_recvmsg() is to wait for incoming tls
messages and copy up to exactly len bytes of data that the user
provided. This is problematic in the sense that i) if no packet
is currently queued in strparser we keep waiting until one has been
processed and pushed into tls receive layer for tls_wait_data() to
wake up and push the decrypted bits to user space. Given after
tls decryption, we're back at streaming data, use sock_rcvlowat()
hint from tcp socket instead. Retain current behavior with MSG_WAITALL
flag and otherwise use the hint target for breaking the loop and
returning to application. This is done if currently no ctx->recv_pkt
is ready, otherwise continue to process it from our strparser
backlog.

Fixes: c46234ebb4d1 ("tls: RX path for ktls")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotls: fix use-after-free in tls_push_record
Daniel Borkmann [Fri, 15 Jun 2018 01:07:45 +0000 (03:07 +0200)]
tls: fix use-after-free in tls_push_record

syzkaller managed to trigger a use-after-free in tls like the
following:

  BUG: KASAN: use-after-free in tls_push_record.constprop.15+0x6a2/0x810 [tls]
  Write of size 1 at addr ffff88037aa08000 by task a.out/2317

  CPU: 3 PID: 2317 Comm: a.out Not tainted 4.17.0+ #144
  Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016
  Call Trace:
   dump_stack+0x71/0xab
   print_address_description+0x6a/0x280
   kasan_report+0x258/0x380
   ? tls_push_record.constprop.15+0x6a2/0x810 [tls]
   tls_push_record.constprop.15+0x6a2/0x810 [tls]
   tls_sw_push_pending_record+0x2e/0x40 [tls]
   tls_sk_proto_close+0x3fe/0x710 [tls]
   ? tcp_check_oom+0x4c0/0x4c0
   ? tls_write_space+0x260/0x260 [tls]
   ? kmem_cache_free+0x88/0x1f0
   inet_release+0xd6/0x1b0
   __sock_release+0xc0/0x240
   sock_close+0x11/0x20
   __fput+0x22d/0x660
   task_work_run+0x114/0x1a0
   do_exit+0x71a/0x2780
   ? mm_update_next_owner+0x650/0x650
   ? handle_mm_fault+0x2f5/0x5f0
   ? __do_page_fault+0x44f/0xa50
   ? mm_fault_error+0x2d0/0x2d0
   do_group_exit+0xde/0x300
   __x64_sys_exit_group+0x3a/0x50
   do_syscall_64+0x9a/0x300
   ? page_fault+0x8/0x30
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This happened through fault injection where aead_req allocation in
tls_do_encryption() eventually failed and we returned -ENOMEM from
the function. Turns out that the use-after-free is triggered from
tls_sw_sendmsg() in the second tls_push_record(). The error then
triggers a jump to waiting for memory in sk_stream_wait_memory()
resp. returning immediately in case of MSG_DONTWAIT. What follows is
the trim_both_sgl(sk, orig_size), which drops elements from the sg
list added via tls_sw_sendmsg(). Now the use-after-free gets triggered
when the socket is being closed, where tls_sk_proto_close() callback
is invoked. The tls_complete_pending_work() will figure that there's
a pending closed tls record to be flushed and thus calls into the
tls_push_pending_closed_record() from there. ctx->push_pending_record()
is called from the latter, which is the tls_sw_push_pending_record()
from sw path. This again calls into tls_push_record(). And here the
tls_fill_prepend() will panic since the buffer address has been freed
earlier via trim_both_sgl(). One way to fix it is to move the aead
request allocation out of tls_do_encryption() early into tls_push_record().
This means we don't prep the tls header and advance state to the
TLS_PENDING_CLOSED_RECORD before allocation which could potentially
fail happened. That fixes the issue on my side.

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Reported-by: syzbot+5c74af81c547738e1684@syzkaller.appspotmail.com
Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'l2tp-l2tp_ppp-must-ignore-non-PPP-sessions'
David S. Miller [Fri, 15 Jun 2018 16:12:37 +0000 (09:12 -0700)]
Merge branch 'l2tp-l2tp_ppp-must-ignore-non-PPP-sessions'

Guillaume Nault says:

====================
l2tp: l2tp_ppp must ignore non-PPP sessions

The original L2TP code was written for version 2 of the protocol, which
could only carry PPP sessions. Then L2TPv3 generalised the protocol so that
it could transport different kinds of pseudo-wires. But parts of the
l2tp_ppp module still break in presence of non-PPP sessions.

Assuming L2TPv2 tunnels can only transport PPP sessions is right, but
l2tp_netlink failed to ensure that (fixed in patch 1).
When retrieving a session from an arbitrary tunnel, l2tp_ppp needs to
filter out non-PPP sessions (last occurrence fixed in patch 2).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agol2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
Guillaume Nault [Fri, 15 Jun 2018 13:39:19 +0000 (15:39 +0200)]
l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()

pppol2tp_tunnel_ioctl() can act on an L2TPv3 tunnel, in which case
'session' may be an Ethernet pseudo-wire.

However, pppol2tp_session_ioctl() expects a PPP pseudo-wire, as it
assumes l2tp_session_priv() points to a pppol2tp_session structure. For
an Ethernet pseudo-wire l2tp_session_priv() points to an l2tp_eth_sess
structure instead, making pppol2tp_session_ioctl() access invalid
memory.

Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agol2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
Guillaume Nault [Fri, 15 Jun 2018 13:39:17 +0000 (15:39 +0200)]
l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels

The /proc/net/pppol2tp handlers (pppol2tp_seq_*()) iterate over all
L2TPv2 tunnels, and rightfully expect that only PPP sessions can be
found there. However, l2tp_netlink accepts creating Ethernet sessions
regardless of the underlying tunnel version.

This confuses pppol2tp_seq_session_show(), which expects that
l2tp_session_priv() returns a pppol2tp_session structure. When the
session is an Ethernet pseudo-wire, a struct l2tp_eth_sess is returned
instead. This leads to invalid memory access when
pppol2tp_session_get_sock() later tries to dereference ps->sk.

Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'mlxsw-IPv6-and-reference-counting-fixes'
David S. Miller [Fri, 15 Jun 2018 16:11:17 +0000 (09:11 -0700)]
Merge branch 'mlxsw-IPv6-and-reference-counting-fixes'

Ido Schimmel says:

====================
mlxsw: IPv6 and reference counting fixes

The first three patches fix a mismatch between the new IPv6 behavior
introduced in commit f34436a43092 ("net/ipv6: Simplify route replace and
appending into multipath route") and mlxsw. The patches allow the driver
to support multipathing in IPv6 overlays with GRE tunnel devices. A
selftest will be submitted when net-next opens.

The last patch fixes a reference count problem of the port_vlan struct.
I plan to simplify the code in net-next, so that reference counting is
not necessary anymore.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agomlxsw: spectrum_switchdev: Fix port_vlan refcounting
Petr Machata [Fri, 15 Jun 2018 13:23:38 +0000 (16:23 +0300)]
mlxsw: spectrum_switchdev: Fix port_vlan refcounting

Switchdev notifications for addition of SWITCHDEV_OBJ_ID_PORT_VLAN are
distributed not only on clean addition, but also when flags on an
existing VLAN are changed. mlxsw_sp_bridge_port_vlan_add() calls
mlxsw_sp_port_vlan_get() to get at the port_vlan in question, which
implicitly references the object. This then leads to discrepancies in
reference counting when the VLAN is removed. spectrum.c warns about the
problem when the module is removed:

[13578.493090] WARNING: CPU: 0 PID: 2454 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2973 mlxsw_sp_port_remove+0xfd/0x110 [mlxsw_spectrum]
[...]
[13578.627106] Call Trace:
[13578.629617]  mlxsw_sp_fini+0x2a/0xe0 [mlxsw_spectrum]
[13578.634748]  mlxsw_core_bus_device_unregister+0x3e/0x130 [mlxsw_core]
[13578.641290]  mlxsw_pci_remove+0x13/0x40 [mlxsw_pci]
[13578.646238]  pci_device_remove+0x31/0xb0
[13578.650244]  device_release_driver_internal+0x14f/0x220
[13578.655562]  driver_detach+0x32/0x70
[13578.659183]  bus_remove_driver+0x47/0xa0
[13578.663134]  pci_unregister_driver+0x1e/0x80
[13578.667486]  mlxsw_sp_module_exit+0xc/0x3fa [mlxsw_spectrum]
[13578.673207]  __x64_sys_delete_module+0x13b/0x1e0
[13578.677888]  ? exit_to_usermode_loop+0x78/0x80
[13578.682374]  do_syscall_64+0x39/0xe0
[13578.685976]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix by putting the port_vlan when mlxsw_sp_port_vlan_bridge_join()
determines it's a flag-only change.

Fixes: b3529af6bb0d ("spectrum: Reference count VLAN entries")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agomlxsw: spectrum_router: Align with new route replace logic
Ido Schimmel [Fri, 15 Jun 2018 13:23:37 +0000 (16:23 +0300)]
mlxsw: spectrum_router: Align with new route replace logic

Commit f34436a43092 ("net/ipv6: Simplify route replace and appending
into multipath route") changed the IPv6 route replace logic so that the
first matching route (i.e., same metric) is replaced.

Have mlxsw replace the first matching route as well.

Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agomlxsw: spectrum_router: Allow appending to dev-only routes
Ido Schimmel [Fri, 15 Jun 2018 13:23:36 +0000 (16:23 +0300)]
mlxsw: spectrum_router: Allow appending to dev-only routes

Commit f34436a43092 ("net/ipv6: Simplify route replace and appending
into multipath route") changed the IPv6 route append logic so that
dev-only routes can be appended and not only gatewayed routes.

Align mlxsw with the new behaviour.

Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoipv6: Only emit append events for appended routes
Ido Schimmel [Fri, 15 Jun 2018 13:23:35 +0000 (16:23 +0300)]
ipv6: Only emit append events for appended routes

Current code will emit an append event in the FIB notification chain for
any route added with NLM_F_APPEND set, even if the route was not
appended to any existing route.

This is inconsistent with IPv4 where such an event is only emitted when
the new route is appended after an existing one.

Align IPv6 behavior with IPv4, thereby allowing listeners to more easily
handle these events.

Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge tag 'mac80211-for-davem-2018-06-15' of git://git.kernel.org/pub/scm/linux/kerne...
David S. Miller [Fri, 15 Jun 2018 16:08:26 +0000 (09:08 -0700)]
Merge tag 'mac80211-for-davem-2018-06-15' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
A handful of fixes:
 * missing RCU grace period enforcement led to drivers freeing
   data structures before; fix from Dedy Lansky.
 * hwsim module init error paths were messed up; fixed it myself
   after a report from Colin King (who had sent a partial patch)
 * kernel-doc tag errors; fix from Luca Coelho
 * initialize the on-stack sinfo data structure when getting
   station information; fix from Sven Eckelmann
 * TXQ state dumping is now done from init, and when TXQs aren't
   initialized yet at that point, bad things happen, move the
   initialization; fix from Toke Høiland-Jørgensen.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agostmmac: added support for 802.1ad vlan stripping
Elad Nachman [Fri, 15 Jun 2018 06:57:39 +0000 (09:57 +0300)]
stmmac: added support for 802.1ad vlan stripping

stmmac reception handler calls stmmac_rx_vlan() to strip the vlan before
calling napi_gro_receive().

The function assumes VLAN tagged frames are always tagged with
802.1Q protocol, and assigns ETH_P_8021Q to the skb by hard-coding
the parameter on call to __vlan_hwaccel_put_tag() .

This causes packets not to be passed to the VLAN slave if it was created
with 802.1AD protocol
(ip link add link eth0 eth0.100 type vlan proto 802.1ad id 100).

This fix passes the protocol from the VLAN header into
__vlan_hwaccel_put_tag() instead of using the hard-coded value of
ETH_P_8021Q.

NETIF_F_HW_VLAN_STAG_RX check was added and the strip action is now
dependent on the correct combination of features and the detected vlan tag.

NETIF_F_HW_VLAN_STAG_RX feature was added to be in line with the driver
actual abilities.

Signed-off-by: Elad Nachman <eladn@gilat.com>
Reviewed-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoarch/*: Kconfig: fix documentation for NMI watchdog
Mauro Carvalho Chehab [Wed, 9 May 2018 02:44:08 +0000 (23:44 -0300)]
arch/*: Kconfig: fix documentation for NMI watchdog

Changeset 9919cba7ff71 ("watchdog: Update documentation") updated
the documentation, removing the old nmi_watchdog.txt and adding
a file with a new content.

Update Kconfig files accordingly.

Fixes: 9919cba7ff71 ("watchdog: Update documentation")

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodocs: crypto_engine.rst: Fix two parse warnings
Mauro Carvalho Chehab [Sun, 6 May 2018 17:30:09 +0000 (14:30 -0300)]
docs: crypto_engine.rst: Fix two parse warnings

./Documentation/crypto/crypto_engine.rst:13: WARNING: Unexpected indentation.
./Documentation/crypto/crypto_engine.rst:15: WARNING: Block quote ends without a blank line; unexpected unindent.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodocs: can.rst: fix a footnote reference
Mauro Carvalho Chehab [Sun, 6 May 2018 15:00:11 +0000 (12:00 -0300)]
docs: can.rst: fix a footnote reference

As stated at:
http://www.sphinx-doc.org/en/master/usage/restructuredtext/basics.html#footnotes

A footnote should contain either a number, a reference or
an auto number, e. g.:
        [1], [#f1] or [#].

While using [*] accidentaly works for html, it fails for other
document outputs. In particular, it causes an error with LaTeX
output, causing all books after networking to not be built.

So, replace it by a valid syntax.

Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoafs: Optimise callback breaking by not repeating volume lookup
David Howells [Fri, 15 Jun 2018 14:24:50 +0000 (15:24 +0100)]
afs: Optimise callback breaking by not repeating volume lookup

At the moment, afs_break_callbacks calls afs_break_one_callback() for each
separate FID it was given, and the latter looks up the volume individually
for each one.

However, this is inefficient if two or more FIDs have the same vid as we
could reuse the volume.  This is complicated by cell aliasing whereby we
may have multiple cells sharing a volume and can therefore have multiple
callback interests for any particular volume ID.

At the moment afs_break_one_callback() scans the entire list of volumes
we're getting from a server and breaks the appropriate callback in every
matching volume, regardless of cell.  This scan is done for every FID.

Optimise callback breaking by the following means:

 (1) Sort the FID list by vid so that all FIDs belonging to the same volume
     are clumped together.

     This is done through the use of an indirection table as we cannot do
     an insertion sort on the afs_callback_break array as we decode FIDs
     into it as we subsequently also have to decode callback info into it
     that corresponds by array index only.

     We also don't really want to bubblesort afterwards if we can avoid it.

 (2) Sort the server->cb_interests array by vid so that all the matching
     volumes are grouped together.  This permits the scan to stop after
     finding a record that has a higher vid.

 (3) When breaking FIDs, we try to keep server->cb_break_lock as long as
     possible, caching the start point in the array for that volume group
     as long as possible.

     It might make sense to add another layer in that list and have a
     refcounted volume ID anchor that has the matching interests attached
     to it rather than being in the list.  This would allow the lock to be
     dropped without losing the cursor.

Signed-off-by: David Howells <dhowells@redhat.com>
6 years agoafs: Display manually added cells in dynamic root mount
David Howells [Fri, 15 Jun 2018 14:19:22 +0000 (15:19 +0100)]
afs: Display manually added cells in dynamic root mount

Alter the dynroot mount so that cells created by manipulation of
/proc/fs/afs/cells and /proc/fs/afs/rootcell and by specification of a root
cell as a module parameter will cause directories for those cells to be
created in the dynamic root superblock for the network namespace[*].

To this end:

 (1) Only one dynamic root superblock is now created per network namespace
     and this is shared between all attempts to mount it.  This makes it
     easier to find the superblock to modify.

 (2) When a dynamic root superblock is created, the list of cells is walked
     and directories created for each cell already defined.

 (3) When a new cell is added, if a dynamic root superblock exists, a
     directory is created for it.

 (4) When a cell is destroyed, the directory is removed.

 (5) These directories are created by calling lookup_one_len() on the root
     dir which automatically creates them if they don't exist.

[*] Inasmuch as network namespaces are currently supported here.

Signed-off-by: David Howells <dhowells@redhat.com>
6 years agoafs: Enable IPv6 DNS lookups
David Howells [Fri, 15 Jun 2018 14:19:10 +0000 (15:19 +0100)]
afs: Enable IPv6 DNS lookups

Remove the restriction on DNS lookup upcalls that prevents ipv6 addresses
from being looked up.

Signed-off-by: David Howells <dhowells@redhat.com>
6 years agobsg: fix race of bsg_open and bsg_unregister
Anatoliy Glagolev [Wed, 13 Jun 2018 21:38:51 +0000 (15:38 -0600)]
bsg: fix race of bsg_open and bsg_unregister

The existing implementation allows races between bsg_unregister and
bsg_open paths. bsg_unregister and request_queue cleanup and deletion
may start and complete right after bsg_get_device (in bsg_open path)
retrieves bsg_class_device and releases the mutex. Then bsg_open path
touches freed memory of bsg_class_device and request_queue.

One possible fix is to hold the mutex all the way through bsg_get_device
instead of releasing it after bsg_class_device retrieval.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-Off-By: Anatoliy Glagolev <glagolig@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
6 years agoblock: remov blk_queue_invalidate_tags
Christoph Hellwig [Fri, 15 Jun 2018 11:55:07 +0000 (13:55 +0200)]
block: remov blk_queue_invalidate_tags

This function is entirely unused, so remove it and the tag_queue_busy
member of struct request_queue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
6 years agoMerge branch 'nvme-4.18' of git://git.infradead.org/nvme into for-linus
Jens Axboe [Fri, 15 Jun 2018 14:11:05 +0000 (08:11 -0600)]
Merge branch 'nvme-4.18' of git://git.infradead.org/nvme into for-linus

Pull NVMe fixes from Christoph:

"Fix various little regressions introduced in this merge window, plus
 a rework of the fibre channel connect and reconnect path to share the
 code instead of having separate sets of bugs. Last but not least a
 trivial trace point addition from Hannes."

* 'nvme-4.18' of git://git.infradead.org/nvme:
  nvme-fabrics: fix and refine state checks in __nvmf_check_ready
  nvme-fabrics: handle the admin-only case properly in nvmf_check_ready
  nvme-fabrics: refactor queue ready check
  blk-mq: remove blk_mq_tagset_iter
  nvme: remove nvme_reinit_tagset
  nvme-fc: fix nulling of queue data on reconnect
  nvme-fc: remove reinit_request routine
  nvme-fc: change controllers first connect to use reconnect path
  nvme: don't rely on the changed namespace list log
  nvmet: free smart-log buffer after use
  nvme-rdma: fix error flow during mapping request data
  nvme: add bio remapping tracepoint
  nvme: fix NULL pointer dereference in nvme_init_subsystem

6 years agocfg80211: fix rcu in cfg80211_unregister_wdev
Dedy Lansky [Fri, 15 Jun 2018 11:05:01 +0000 (13:05 +0200)]
cfg80211: fix rcu in cfg80211_unregister_wdev

Callers of cfg80211_unregister_wdev can free the wdev object
immediately after this function returns. This may crash the kernel
because this wdev object is still in use by other threads.
Add synchronize_rcu() after list_del_rcu to make sure wdev object can
be safely freed.

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
6 years agomac80211: Move up init of TXQs
Toke Høiland-Jørgensen [Fri, 25 May 2018 12:29:21 +0000 (14:29 +0200)]
mac80211: Move up init of TXQs

On init, ieee80211_if_add() dumps the interface. Since that now includes a
dump of the TXQ state, we need to initialise that before the dump happens.
So move up the TXQ initialisation to to before the call to
ieee80211_if_add().

Fixes: 52539ca89f36 ("cfg80211: Expose TXQ stats and parameters to userspace")
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
6 years agomac80211_hwsim: fix module init error paths
Johannes Berg [Tue, 29 May 2018 10:04:51 +0000 (12:04 +0200)]
mac80211_hwsim: fix module init error paths

We didn't free the workqueue on any errors, nor did we
correctly check for rhashtable allocation errors, nor
did we free the hashtable on error.

Reported-by: Colin King <colin.king@canonical.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
6 years agocfg80211: initialize sinfo in cfg80211_get_station
Sven Eckelmann [Wed, 6 Jun 2018 08:53:55 +0000 (10:53 +0200)]
cfg80211: initialize sinfo in cfg80211_get_station

Most of the implementations behind cfg80211_get_station will not initialize
sinfo to zero before manipulating it. For example, the member "filled",
which indicates the filled in parts of this struct, is often only modified
by enabling certain bits in the bitfield while keeping the remaining bits
in their original state. A caller without a preinitialized sinfo.filled can
then no longer decide which parts of sinfo were filled in by
cfg80211_get_station (or actually the underlying implementations).

cfg80211_get_station must therefore take care that sinfo is initialized to
zero. Otherwise, the caller may tries to read information which was not
filled in and which must therefore also be considered uninitialized. In
batadv_v_elp_get_throughput's case, an invalid "random" expected throughput
may be stored for this neighbor and thus the B.A.T.M.A.N V algorithm may
switch to non-optimal neighbors for certain destinations.

Fixes: 7406353d43c8 ("cfg80211: implement cfg80211_get_station cfg80211 API")
Reported-by: Thomas Lauer <holminateur@gmail.com>
Reported-by: Marcel Schmidt <ff.z-casparistrasse@mailbox.org>
Cc: b.a.t.m.a.n@lists.open-mesh.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
6 years agonl80211: fix some kernel doc tag mistakes
Luca Coelho [Fri, 8 Jun 2018 07:04:47 +0000 (10:04 +0300)]
nl80211: fix some kernel doc tag mistakes

There is a bunch of tags marking constants with &, which means struct
or enum name.  Replace them with %, which is the correct tag for
constants.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
6 years agonvme-fabrics: fix and refine state checks in __nvmf_check_ready
Christoph Hellwig [Mon, 11 Jun 2018 15:41:11 +0000 (17:41 +0200)]
nvme-fabrics: fix and refine state checks in __nvmf_check_ready

 - make sure we only allow internally generates commands in any non-live
   state
 - only allow connect commands on non-live queues when actually in the
   new or connecting states
 - treat all other non-live, non-dead states the same as a default
   cach-all

This fixes a regression where we could not shutdown a controller
orderly as we didn't allow the internal generated Property Set
command, and also ensures we don't accidentally let a Connect command
through in the wrong state.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
6 years agonvme-fabrics: handle the admin-only case properly in nvmf_check_ready
Christoph Hellwig [Mon, 11 Jun 2018 15:37:23 +0000 (17:37 +0200)]
nvme-fabrics: handle the admin-only case properly in nvmf_check_ready

In the ADMIN_ONLY state we don't have any I/O queues, but we should accept
all admin commands without further checks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: James Smart <james.smart@broadcom.com>

6 years agonvme-fabrics: refactor queue ready check
Christoph Hellwig [Mon, 11 Jun 2018 15:34:06 +0000 (17:34 +0200)]
nvme-fabrics: refactor queue ready check

Move the is_connected check to the fibre channel transport, as it has no
meaning for other transports.  To facilitate this split out a new
nvmf_fail_nonready_command helper that is called by the transport when
it is asked to handle a command on a queue that is not ready.

Also avoid a function call for the queue live fast path by inlining
the check.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
6 years agoMerge tag 'linux-kselftest-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 15 Jun 2018 08:26:29 +0000 (17:26 +0900)]
Merge tag 'linux-kselftest-4.18-rc1-2' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull more Kselftest updates from Shuah Khan:

 - fix a signedness bug in cgroups test

 - add ppc support for kprobe args tests

* tag 'linux-kselftest-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kselftest/cgroup: fix a signedness bug
  selftests/ftrace: Add ppc support for kprobe args tests

6 years agoMerge tag 'sound-fix-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Fri, 15 Jun 2018 08:24:40 +0000 (17:24 +0900)]
Merge tag 'sound-fix-4.18-rc1' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Here is a collection of small fixes on top of the previous update.

  All small and obvious fixes. Mostly for usual suspects, USB-audio and
  HD-audio, but a few trivial error handling fixes for misc drivers as
  well"

* tag 'sound-fix-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Always create the interrupt pipe for the mixer
  ALSA: usb-audio: Add insertion control for UAC3 BADD
  ALSA: usb-audio: Change in connectors control creation interface
  ALSA: usb-audio: Add bi-directional terminal types
  ALSA: lx6464es: add error handling for pci_ioremap_bar
  ALSA: sonicvibes: add error handling for snd_ctl_add
  ALSA: usb-audio: Remove explicitly listed Mytek devices
  ALSA: usb-audio: Generic DSD detection for XMOS-based implementations
  ALSA: usb-audio: Add native DSD support for Mytek DACs
  ALSA: hda/realtek - Add shutup hint
  ALSA: usb-audio: Disable the quirk for Nura headset
  ALSA: hda: add dock and led support for HP ProBook 640 G4
  ALSA: hda: add dock and led support for HP EliteBook 830 G5
  ALSA: emu10k1: add error handling for snd_ctl_add
  ALSA: fm801: add error handling for snd_ctl_add

6 years agoMerge tag 'drm-next-2018-06-15' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Fri, 15 Jun 2018 08:20:53 +0000 (17:20 +0900)]
Merge tag 'drm-next-2018-06-15' of git://anongit.freedesktop.org/drm/drm

Pull amd drm fixes from Dave Airlie:
 "Just a single set of AMD fixes for stuff in -next for -rc1"

* tag 'drm-next-2018-06-15' of git://anongit.freedesktop.org/drm/drm: (47 commits)
  drm/amd/powerplay: Set higher SCLK&MCLK frequency than dpm7 in OD (v2)
  drm/amd/powerplay: remove uncessary extra gfxoff control call
  drm/amdgpu: fix parsing indirect register list v2
  drm/amd/include: Update df 3.6 mask and shift definition
  drm/amd/pp: Fix OD feature enable failed on Vega10 workstation cards
  drm/amd/display: Fix stale buffer object (bo) use
  drm/amd/pp: initialize result to before or'ing in data
  drm/amd/powerplay: fix wrong clock adjust sequence
  drm/amdgpu: Grab/put runtime PM references in atomic_commit_tail()
  drm/amd/powerplay: fix missed hwmgr check warning before call gfx_off_control handler
  drm/amdgpu: fix CG enabling hang with gfxoff enabled
  drm/amdgpu: fix clear_all and replace handling in the VM (v2)
  drm/amdgpu: add checking for sos version
  drm/amdgpu: fix the missed vcn fw version report
  Revert "drm/amdgpu: Add an ATPX quirk for hybrid laptop"
  drm/amdgpu/df: fix potential array out-of-bounds read
  drm/amdgpu: Fix NULL pointer when load kfd driver with PP block is disabled
  drm/gfx9: Update gc goldensetting for vega20.
  drm/amd/pp: Allow underclocking when od table is empty in vbios
  drm/amdgpu/display: check if ppfuncs exists before using it
  ...

6 years agosmb3: fix corrupt path in subdirs on smb311 with posix
Steve French [Fri, 15 Jun 2018 03:30:56 +0000 (22:30 -0500)]
smb3: fix corrupt path in subdirs on smb311 with posix

Signed-off-by: Steve French <stfrench@microsoft.com>
6 years agosmb3: do not display empty interface list
Steve French [Fri, 15 Jun 2018 02:59:31 +0000 (21:59 -0500)]
smb3: do not display empty interface list

If server does not support listing interfaces then do not
display empty "Server interfaces" line to avoid confusing users.

Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Aurelien Aptel <aaptel@suse.com>
6 years agosmb3: Fix mode on mkdir on smb311 mounts
Steve French [Fri, 15 Jun 2018 02:56:32 +0000 (21:56 -0500)]
smb3: Fix mode on mkdir on smb311 mounts

mkdir was not passing the mode on smb3.11 mounts with posix extensions

Signed-off-by: Steve French <stfrench@microsoft.com>
6 years agocifs: Fix kernel oops when traceSMB is enabled
Paulo Alcantara [Thu, 14 Jun 2018 20:34:08 +0000 (17:34 -0300)]
cifs: Fix kernel oops when traceSMB is enabled

When traceSMB is enabled through 'echo 1 > /proc/fs/cifs/traceSMB', after a
mount, the following oops is triggered:

[   27.137943] BUG: unable to handle kernel paging request at
ffff8800f80c268b
[   27.143396] PGD 2c6b067 P4D 2c6b067 PUD 0
[   27.145386] Oops: 0000 [#1] SMP PTI
[   27.146186] CPU: 2 PID: 2655 Comm: mount.cifs Not tainted 4.17.0+ #39
[   27.147174] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.0.0-prebuilt.qemu-project.org 04/01/2014
[   27.148969] RIP: 0010:hex_dump_to_buffer+0x413/0x4b0
[   27.149738] Code: 48 8b 44 24 08 31 db 45 31 d2 48 89 6c 24 18 44 89
6c 24 24 48 c7 c1 78 b5 23 82 4c 89 64 24 10 44 89 d5 41 89 dc 4c 8d 58
02 <44> 0f b7 00 4d 89 dd eb 1f 83 c5 01 41 01 c4 41 39 ef 0f 84 48 fe
[   27.152396] RSP: 0018:ffffc9000058f8c0 EFLAGS: 00010246
[   27.153129] RAX: ffff8800f80c268b RBX: 0000000000000000 RCX:
ffffffff8223b578
[   27.153867] RDX: 0000000000000000 RSI: ffffffff81a55496 RDI:
0000000000000008
[   27.154612] RBP: 0000000000000000 R08: 0000000000000020 R09:
0000000000000083
[   27.155355] R10: 0000000000000000 R11: ffff8800f80c268d R12:
0000000000000000
[   27.156101] R13: 0000000000000002 R14: ffffc9000058f94d R15:
0000000000000008
[   27.156838] FS:  00007f1693a6b740(0000) GS:ffff88007fd00000(0000)
knlGS:0000000000000000
[   27.158354] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   27.159093] CR2: ffff8800f80c268b CR3: 00000000798fa001 CR4:
0000000000360ee0
[   27.159892] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[   27.160661] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[   27.161464] Call Trace:
[   27.162123]  print_hex_dump+0xd3/0x160
[   27.162814] journal-offline (2658) used greatest stack depth: 13144
bytes left
[   27.162824]  ? __release_sock+0x60/0xd0
[   27.165344]  ? tcp_sendmsg+0x31/0x40
[   27.166177]  dump_smb+0x39/0x40
[   27.166972]  ? vsnprintf+0x236/0x490
[   27.167807]  __smb_send_rqst.constprop.12+0x103/0x430
[   27.168554]  ? apic_timer_interrupt+0xa/0x20
[   27.169306]  smb_send_rqst+0x48/0xc0
[   27.169984]  cifs_send_recv+0xda/0x420
[   27.170639]  SMB2_negotiate+0x23d/0xfa0
[   27.171301]  ? vsnprintf+0x236/0x490
[   27.171961]  ? smb2_negotiate+0x19/0x30
[   27.172586]  smb2_negotiate+0x19/0x30
[   27.173257]  cifs_negotiate_protocol+0x70/0xd0
[   27.173935]  ? kstrdup+0x43/0x60
[   27.174551]  cifs_get_smb_ses+0x295/0xbe0
[   27.175260]  ? lock_timer_base+0x67/0x80
[   27.175936]  ? __internal_add_timer+0x1a/0x50
[   27.176575]  ? add_timer+0x10f/0x230
[   27.177267]  cifs_mount+0x101/0x1190
[   27.177940]  ? cifs_smb3_do_mount+0x144/0x5c0
[   27.178575]  cifs_smb3_do_mount+0x144/0x5c0
[   27.179270]  mount_fs+0x35/0x150
[   27.179930]  vfs_kern_mount.part.28+0x54/0xf0
[   27.180567]  do_mount+0x5ad/0xc40
[   27.181234]  ? kmem_cache_alloc_trace+0xed/0x1a0
[   27.181916]  ksys_mount+0x80/0xd0
[   27.182535]  __x64_sys_mount+0x21/0x30
[   27.183220]  do_syscall_64+0x4e/0x100
[   27.183882]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   27.184535] RIP: 0033:0x7f169339055a
[   27.185192] Code: 48 8b 0d 41 d9 2b 00 f7 d8 64 89 01 48 83 c8 ff c3
66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0e d9 2b 00 f7 d8 64 89 01 48
[   27.187268] RSP: 002b:00007fff7b44eb58 EFLAGS: 00000202 ORIG_RAX:
00000000000000a5
[   27.188515] RAX: ffffffffffffffda RBX: 00007f1693a7e70e RCX:
00007f169339055a
[   27.189244] RDX: 000055b9f97f64e5 RSI: 000055b9f97f652c RDI:
00007fff7b45074f
[   27.189974] RBP: 000055b9fb8c9260 R08: 000055b9fb8ca8f0 R09:
0000000000000000
[   27.190721] R10: 0000000000000000 R11: 0000000000000202 R12:
000055b9fb8ca8f0
[   27.191429] R13: 0000000000000000 R14: 00007f1693a7c000 R15:
00007f1693a7e91d
[   27.192167] Modules linked in:
[   27.192797] CR2: ffff8800f80c268b
[   27.193435] ---[ end trace 67404c618badf323 ]---

The problem was that dump_smb() had been called with an invalid pointer,
that is, in __smb_send_rqst(), iov[1] doesn't exist (n_vec == 1).

This patch fixes it by relying on the n_vec value to dump out the smb
packets.

Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
6 years agoCIFS: dump every session iface info
Aurelien Aptel [Thu, 14 Jun 2018 13:43:20 +0000 (15:43 +0200)]
CIFS: dump every session iface info

Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
6 years agoCIFS: parse and store info on iface queries
Aurelien Aptel [Thu, 14 Jun 2018 15:04:51 +0000 (17:04 +0200)]
CIFS: parse and store info on iface queries

Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
6 years agoCIFS: add iface info to struct cifs_ses
Aurelien Aptel [Thu, 14 Jun 2018 13:43:18 +0000 (15:43 +0200)]
CIFS: add iface info to struct cifs_ses

Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
6 years agoCIFS: complete PDU definitions for interface queries
Aurelien Aptel [Thu, 14 Jun 2018 13:43:17 +0000 (15:43 +0200)]
CIFS: complete PDU definitions for interface queries

Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
6 years agoCIFS: move default port definitions to cifsglob.h
Aurelien Aptel [Thu, 14 Jun 2018 13:43:16 +0000 (15:43 +0200)]
CIFS: move default port definitions to cifsglob.h

Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
6 years agocifs: Fix encryption/signing
Paulo Alcantara [Wed, 13 Jun 2018 16:54:14 +0000 (13:54 -0300)]
cifs: Fix encryption/signing

Since the rfc1002 generation was moved down to __smb_send_rqst(),
the transform header is now in rqst->rq_iov[0].

Correctly assign the transform header pointer in crypt_message().

Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
6 years agocifs: update __smb_send_rqst() to take an array of requests
Ronnie Sahlberg [Mon, 11 Jun 2018 22:01:00 +0000 (08:01 +1000)]
cifs: update __smb_send_rqst() to take an array of requests

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>