vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE

In VT_ACTIVATE an almost identical code path has been patched
with array_index_nospec. In the VT_DISALLOCATE path, the arg is
the user input from a system call argument and lately used as a index
for vc_cons[index].d access, which can be reached through path like
vt_disallocate->vc_busy or vt_disallocate->vc_deallocate.
For consistency both code paths should have the same mitigations
applied. Also, the code style is adjusted as suggested by Jiri.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220314122921.31223-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: fix XOFF/XON sending when DMA is used

When 8250 UART is using DMA, x_char (XON/XOFF) is never sent
to the wire. After this change, x_char is injected correctly.

Create uart_xchar_out() helper for sending the x_char out and
accounting related to it. It seems that almost every driver
does these same steps with x_char. Except for 8250, however,
almost all currently lack .serial_out so they cannot immediately
take advantage of this new helper.

The downside of this patch is that it might reintroduce
the problems some devices faced with mixed DMA/non-DMA transfer
which caused revert f967fc8f165f (Revert "serial: 8250_dma:
don't bother DMA with small transfers"). However, the impact
should be limited to cases with XON/XOFF (that didn't work
with DMA capable devices to begin with so this problem is not
very likely to cause a major issue, if any at all).

Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Reported-by: Gilles Buloz <gilles.buloz@kontron.com>
Tested-by: Gilles Buloz <gilles.buloz@kontron.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220314091432.4288-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: samsung: Add ARTPEC-8 support

Add support for the UART block on the ARTPEC-8 SoC.  This is closely
related to the variants used on the Exynos chips.  The register layout
is identical to Exynos850 et al but the fifo size is different (64 bytes
in each direction for all instances).

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220311094515.3223023-3-vincent.whitchurch@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: serial: samsung: Add ARTPEC-8 UART

Add a compatible for the UART on the ARTPEC-8 SoC.  This hardware block
is closely related to the variants used on the Exynos chips.  The
register layout is identical to Exynos850 et al but the fifo size is
different (64 bytes in each direction for all instances).

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220311094515.3223023-2-vincent.whitchurch@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sc16is7xx: Clear RS485 bits in the shutdown

We tested RS485 function on an EVB which has SC16IS752, after
finishing the test, we started the RS232 function test, but found the
RTS is still working in the RS485 mode.

That is because both startup and shutdown call port_update() to set
the EFCR_REG, this will not clear the RS485 bits once the bits are set
in the reconf_rs485(). To fix it, clear the RS485 bits in shutdown.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220308110042.108451-1-hui.wang@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: samsung: simplify getting OF match data

Simplify the code with of_device_get_match_data() and use dev_of_node()
to remove ifdef-erry.

Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308080919.152715-9-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: samsung: constify variables and pointers

Constify variables, data pointed by several pointers and
"udivslot_table" static array.  This makes code a bit safer.

Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308080919.152715-8-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: samsung: constify s3c24xx_serial_drv_data members

The driver data (struct s3c24xx_serial_drv_data) is never modified, so
also its members can be made const.  Except code style this has no
impact because the structure itself is always a const.

Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308080919.152715-7-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: samsung: constify UART name

The UART name from driver data holds only string literals.

Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308080919.152715-6-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: samsung: constify s3c24xx_serial_drv_data

The driver data (struct s3c24xx_serial_drv_data) is only used to
initialize the driver properly and is not modified.  Make it const.

Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308080919.152715-5-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: samsung: reduce number of casts

The pointers to instances of "struct s3c24xx_serial_drv_data" are first
cast to kernel_ulong_t and then either used directly
(in "platform_device_id.driver_data") or cast again to void * (in
"of_device_id.data").

One cast can be dropped, so at least for "of_device_id.data" case there
will be no casts at all.  This makes the code a bit simpler.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308080919.152715-4-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: samsung: embed s3c2410_uartcfg in parent structure

Embed "struct s3c2410_uartcfg" directly as a member of "struct
s3c24xx_serial_drv_data" instead of keeping it as a pointer.  This makes
the code clearer (obvious ownership of "s3c2410_uartcfg
s3c24xx_serial_drv_data") and saves one pointer.

Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308080919.152715-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: samsung: embed s3c24xx_uart_info in parent structure

Embed "struct s3c24xx_uart_info" directly as a member of "struct
s3c24xx_serial_drv_data" instead of keeping it as a pointer.  This makes
the code clearer (obvious ownership of "struct s3c24xx_serial_drv_data")
and saves one pointer.

Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308080919.152715-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_tegra: mark acpi_device_id as unused with !ACPI

The driver's acpi_device_id table is referenced via ACPI_PTR() so it
will be unused for !CONFIG_ACPI builds:

  drivers/tty/serial/8250/8250_tegra.c:178:36:
    warning: ‘tegra_uart_acpi_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308074157.113568-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: bcm63xx: use more precise Kconfig symbol

Patches lowering SERIAL_BCM63XX dependencies led to a discussion and
documentation change regarding "depends" usage. Adjust Kconfig entry to
match current guidelines. Make this symbol available for relevant
architectures only.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Ref: f35a07f92616 ("tty: serial: bcm63xx: lower driver dependencies")
Ref: 18084e435ff6 ("Documentation/kbuild: Document platform dependency practises")
Link: https://lore.kernel.org/r/20220311093233.10012-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS

Sunplus serial ports are only present on Sunplus SoCs.  Hence add a
dependency on ARCH_SUNPLUS, to prevent asking the user about this driver
when configuring a kernel without Sunplus SoC support.

Fixes: 9e8d5470325f25be ("serial: sunplus-uart: Add Sunplus SoC UART Driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/59f46272ab5b16853acac4d585c3333cfd394223.1647352195.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: jsm: fix two assignments in if conditions

Fixes two warnings reported of the form
"ERROR: do not use assignment in if condition"
reported by checkpatch.pl.

Signed-off-by: Alexander Vorwerk <alexander.vorwerk@stud.uni-goettingen.de>
Link: https://lore.kernel.org/r/20220315020745.15752-1-alexander.vorwerk@stud.uni-goettingen.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: jsm: remove redundant assignments to variable linestatus

Variable linestatus is being assigned values that are never read, the
assignments are redundant and can be removed.

Cleans up clang scan warnings:
drivers/tty/serial/jsm/jsm_cls.c:369:2: warning: Value stored to
'linestatus' is never read [deadcode.DeadStores]
drivers/tty/serial/jsm/jsm_cls.c:400:4: warning: Value stored to
'linestatus' is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220307153047.139639-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_mtk: make two read-only arrays static const

Don't populate the read-only arrays fraction_L_mapping and
fraction_M_mapping on the stack but instead make them static
const. Also makes the object code a little smaller.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220307230055.168241-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()

The commit c15c3747ee32 (serial: samsung: fix potential soft lockup
during uart write) added an unlock of port->lock before
uart_write_wakeup() and a lock after it. It was always problematic to
write data from tty_ldisc_ops::write_wakeup and it was even documented
that way. We fixed the line disciplines to conform to this recently.
So if there is still a missed one, we should fix them instead of this
workaround.

On the top of that, s3c24xx_serial_tx_dma_complete() in this driver
still holds the port->lock while calling uart_write_wakeup().

So revert the wrap added by the commit above.

Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Hyeonkook Kim <hk619.kim@samsung.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220308115153.4225-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: serial_txx9: remove struct uart_txx9_port

It's only a wrapper to struct uart_port, so unwrap the whole code.

No change in functionality is intended.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220307054348.31748-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kgdboc: fix return value of __setup handler

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
So return 1 from kgdboc_option_setup().

Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
  kgdboc=kbd kgdbts=", will be passed to user space.

 Run /sbin/init as init process
   with arguments:
     /sbin/init
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc7
     kgdboc=kbd
     kgdbts=

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Fixes: 1bd54d851f50 ("kgdboc: Passing ekgdboc to command line causes panic")
Fixes: f2d937f3bf00 ("consoles: polling support, kgdboc")
Cc: He Zhe <zhe.he@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: linux-serial@vger.kernel.org
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220309033018.17936-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: hvc: fix return value of __setup handler

__setup() handlers should return 1 to indicate that the boot option
has been handled or 0 to indicate that it was not handled.
Add a pr_warn() message if the option value is invalid and then
always return 1.

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Fixes: 86b40567b917 ("tty: replace strict_strtoul() with kstrtoul()")
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220308024228.20477-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: samsung: Add samsung_early_read to support early kgdboc

The 'kgdboc_earlycon_init' looks for boot console that has both .read
and .write callbacks. Adds 'samsung_early_read' to samsung_tty.c's early
console to support kgdboc.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Woody Lin <woodylin@google.com>
Link: https://lore.kernel.org/r/20220302114923.144523-1-woodylin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: make uart_console_write->putchar()'s character an unsigned char

Currently, uart_console_write->putchar's second parameter (the
character) is of type int. It makes little sense, provided uart_console_write()
accepts the input string as "const char *s" and passes its content -- the
characters -- to putchar(). So switch the character's type to unsigned
char.

We don't use char as that is signed on some platforms. That would cause
troubles for drivers which (implicitly) cast the char to u16 when
writing to the device. Sign extension would happen in that case and the
value written would be completely different to the provided char. DZ is
an example of such a driver -- on MIPS, it uses u16 for dz_out in
dz_console_putchar().

Note we do the char -> uchar conversion implicitly in
uart_console_write(). Provided we do not change size of the data type,
sign extension does not happen there, so the problem is void.

This makes the types consistent and unified with the rest of the uart
layer, which uses unsigned char in most places already. One exception is
xmit_buf, but that is going to be converted later.

Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Alexander Shiyan <shc_work@mail.ru>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: "Maciej W. Rozycki" <macro@orcam.me.uk>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Karol Gugala <kgugala@antmicro.com>
Cc: Mateusz Holenko <mholenko@antmicro.com>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Taichi Sugaya <sugaya.taichi@socionext.com>
Cc: Takao Orito <orito.takao@socionext.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com> [atmel_serial]
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson_serial
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220303080831.21783-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: mvebu-uart: fix return value check in mvebu_uart_clock_probe()

In case of error, the function devm_ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.

Fixes: b7e2b5360f9b ("serial: mvebu-uart: implement UART clock driver for configuring UART base clock")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220301075806.3950108-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sc16is7xx: Set AUTOCTS and AUTORTS bits

Let serial core know that the chip automatically handles RTS/CTS signal.
This elimines completely unnecessary I2C/SPI bus traffic.

Cease reading from RX FIFO (by disabling RDI interrupt) when throttled.
Eventually the FIFO will fill up and the device will drive RTS output
inactive. Unthrottle by enabling back RDI interrupt.

Indirectly controlling RTS via RX FIFO state seems to be the only option
because RTS bit is ignored when hardware flow control is enabled.

Signed-off-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Link: https://lore.kernel.org/r/20220301060332.2561851-4-tomasz.mon@camlingroup.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sc16is7xx: Handle modem status lines

The uart_handle_cts_change() and uart_handle_dcd_change() must be called
with port lock being held. Acquire the lock after reading MSR register.
Do not acquire spin lock when reading MSR register because I2C/SPI port
functions cannot be called with spinlocks held.

Update rng and dsr counters. Wake up delta_msr_wait to allow tty notice
modem status change.

Co-developed-by: Lech Perczak <l.perczak@camlintechnologies.com>
Co-developed-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Signed-off-by: Lech Perczak <l.perczak@camlintechnologies.com>
Signed-off-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Link: https://lore.kernel.org/r/20220301060332.2561851-3-tomasz.mon@camlingroup.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sc16is7xx: Properly resume TX after stop

sc16is7xx_stop_tx() clears THRI bit and thus disables THRI interrupt.
This makes it possible for transmission to cease indefinitely when more
than 64 characters are being sent.

The sc16is7xx_handle_tx() call executed by sc16is7xx_tx_proc() can send
up to FIFO length (64) characters. If more characters are written to the
output buffer, then the THRI interrupt is needed.

Solve the issue by enabling THRI interrupt in sc16is7xx_tx_proc().

Signed-off-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Link: https://lore.kernel.org/r/20220301060332.2561851-2-tomasz.mon@camlingroup.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "tty: serial: meson: *"

This reverts the following commits:

31979060cc07 tty: serial: meson: Fix the compile link error reported by kernel test robot
5427c352a993 tty: serial: meson: Added S4 SOC compatibility
19b2ba0baffc tty: serial: meson: The system stuck when you run the stty command on the console to change the baud rate
e5fc2b99840d tty: serial: meson: Make some bit of the REG5 register writable
44023b8e1f14 tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
6436dd8f9b25 tty: serial: meson: Use devm_ioremap_resource to get register mapped memory
841f913e770f tty: serial: meson: Move request the register region to probe

They seem to cause lots of problems with existing hardware platforms,
and caused build issues, so revert the whole series all at once.

Link: https://lore.kernel.org/r/849a95fd-ae81-9a3b-0c06-dd7826af9eb2@baylibre.com
Link: https://lore.kernel.org/all/20220225073922.3947-1-yu.tu@amlogic.com/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Yu Tu <yu.tu@amlogic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sunplus-uart: Fix compile error while CONFIG_SERIAL_SUNPLUS_CONSOLE=n

1. Fix implicit declaration of function 'wait_for_xmitr' issue.
2. Fix 'sunplus_uart_console' undeclared here issue.
3. Fix use of undeclared identifier 'sunplus_uart_console' issue.

Fixes: 9e8d5470325f ("serial: sunplus-uart: Add Sunplus SoC UART Driver")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hammer Hsieh <hammerh0314@gmail.com>
Link: https://lore.kernel.org/r/1646108386-29905-1-git-send-email-hammerh0314@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: meson: Fix the compile link error reported by kernel test robot

Describes the calculation of the UART baud rate clock using a clock
frame. Forgot to add in Kconfig kernel test Robot compilation error
due to COMMON_CLK dependency.

Fixes: 44023b8e1f14 ("tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yu Tu <yu.tu@amlogic.com>
Link: https://lore.kernel.org/r/20220228064910.11636-1-yu.tu@amlogic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mxser: make use of UART_LCR_WLEN() + tty_get_char_size()

Having a generic UART_LCR_WLEN() macro and the tty_get_char_size()
helper, we can remove all those repeated switch-cases in drivers.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220224095558.30929-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sdio_uart: make use of UART_LCR_WLEN() + tty_get_char_size()

Having a generic UART_LCR_WLEN() macro and the tty_get_char_size()
helper, we can remove all those repeated switch-cases in drivers.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220224095558.30929-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size()

Having a generic UART_LCR_WLEN() macro and the tty_get_char_size()
helper, we can remove all those repeated switch-cases in drivers.

Cc: Johan Hovold <johan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220224095558.30929-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: make use of UART_LCR_WLEN() + tty_get_char_size()

Having a generic UART_LCR_WLEN() macro and the tty_get_char_size()
helper, we can remove all those repeated switch-cases in drivers.

Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220224095558.30929-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: define UART_LCR_WLEN() macro

Define a generic UART_LCR_WLEN() macro with a size argument. It can be
used to encode byte size into an LCR value. Therefore we can use it to
simplify the drivers using tty_get_char_size() in the next patches.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220224095558.30929-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.17-rc6 into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.17-rc6

Merge tag 'irq-urgent-2022-02-27' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Thomas Gleixner:
 "A single fix for a regression caused by the recent PCI/MSI rework
  which resulted in a recursive locking problem in the VMD driver.

  The cure is to cache the relevant information upfront instead of
  retrieving it at runtime"

* tag 'irq-urgent-2022-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  PCI: vmd: Prevent recursive locking on interrupt allocation

Merge tag 'dma-mapping-5.17-1' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fix from Christoph Hellwig:

 - fix a swiotlb info leak (Halil Pasic)

* tag 'dma-mapping-5.17-1' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: fix info leak with DMA_FROM_DEVICE

Merge tag 'pinctrl-v5-17-3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

 - Fix some drive strength and pull-up code in the K210 driver.

 - Add the Alder Lake-M ACPI ID so it starts to work properly.

 - Use a static name for the StarFive GPIO irq_chip, forestalling an
   upcoming fixes series from Marc Zyngier.

 - Fix an ages old bug in the Tegra 186 driver where we were indexing at
   random into struct and being lucky getting the right member.

* tag 'pinctrl-v5-17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  gpio: tegra186: Fix chip_data type confusion
  pinctrl: starfive: Use a static name for the GPIO irq_chip
  pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID"
  pinctrl: k210: Fix bias-pull-up
  pinctrl: fix loop in k210_pinconf_get_drive()

Merge tag 'trace-v5.17-rc4' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:

 - rtla (Real-Time Linux Analysis tool):
    - fix typo in man page
    - Update API -e to -E before it is released
    - Error message fix and memory leak fix

 - Partially uninline trace event soft disable to shrink text

 - Fix function graph start up test

 - Have triggers affect the trace instance they are in and not top level

 - Have osnoise sleep in the units it says it uses

 - Remove unused ftrace stub function

 - Remove event probe redundant info from event in the buffer

 - Fix group ownership setting in tracefs

 - Ensure trace buffer is minimum size to prevent crashes

* tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  rtla/osnoise: Fix error message when failing to enable trace instance
  rtla/osnoise: Free params at the exit
  rtla/hist: Make -E the short version of --entries
  tracing: Fix selftest config check for function graph start up test
  tracefs: Set the group ownership in apply_options() not parse_options()
  tracing/osnoise: Make osnoise_main to sleep for microseconds
  ftrace: Remove unused ftrace_startup_enable() stub
  tracing: Ensure trace buffer is at least 4096 bytes large
  tracing: Uninline trace_trigger_soft_disabled() partly
  eprobes: Remove redundant event type information
  tracing: Have traceon and traceoff trigger honor the instance
  tracing: Dump stacktrace trigger to the corresponding instance
  rtla: Fix systme -> system typo on man page

Merge tag 'fixes-2022-02-26' of git://git./linux/kernel/git/rppt/memblock

Pull memblock fix from Mike Rapoport:
 "Use kfree() to release kmalloced memblock regions

  memblock.{reserved,memory}.regions may be allocated using kmalloc()
  in memblock_double_array(). Use kfree() to release these kmalloced
  regions"

* tag 'fixes-2022-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: use kfree() to release kmalloced memblock regions

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "12 patches.

  Subsystems affected by this patch series: MAINTAINERS, mailmap, memfd,
  and mm (hugetlb, kasan, hugetlbfs, pagemap, selftests, memcg, and
  slab)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  selftests/memfd: clean up mapping in mfd_fail_write
  mailmap: update Roman Gushchin's email
  MAINTAINERS, SLAB: add Roman as reviewer, git tree
  MAINTAINERS: add Shakeel as a memcg co-maintainer
  MAINTAINERS: remove Vladimir from memcg maintainers
  MAINTAINERS: add Roman as a memcg co-maintainer
  selftest/vm: fix map_fixed_noreplace test failure
  mm: fix use-after-free bug when mm->mmap is reused after being freed
  hugetlbfs: fix a truncation issue in hugepages parameter
  kasan: test: prevent cache merging in kmem_cache_double_destroy
  mm/hugetlb: fix kernel crash with hugetlb mremap
  MAINTAINERS: add sysctl-next git tree

Merge tag 'riscv-for-linus-5.17-rc6' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for the K210 sdcard defconfig, to avoid using a
   fixed delay for the root FS

 - A fix to make sure there's a proper call frame for
   trace_hardirqs_{on,off}().

* tag 'riscv-for-linus-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: fix oops caused by irqsoff latency tracer
  riscv: fix nommu_k210_sdcard_defconfig

Merge tag 'xfs-5.17-fixes-2' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
 "Nothing exciting, just more fixes for not returning sync_filesystem
  error values (and eliding it when it's not necessary).

  Summary:

   - Only call sync_filesystem when we're remounting the filesystem
     readonly readonly, and actually check its return value"

* tag 'xfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: only bother with sync_filesystem during readonly remount

selftests/memfd: clean up mapping in mfd_fail_write

Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:

    memfd-hugetlb: CREATE
    memfd-hugetlb: BASIC
    memfd-hugetlb: SEAL-WRITE
    memfd-hugetlb: SEAL-FUTURE-WRITE
    memfd-hugetlb: SEAL-SHRINK
    fallocate(ALLOC) failed: No space left on device
    ./run_hugetlbfs_test.sh: line 60: 166855 Aborted                 (core dumped) ./memfd_test hugetlbfs
    opening: ./mnt/memfd
    fuse: DONE

If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test.  In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap.  As a
result, two hugetlb pages remain reserved for the mapping.  When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.

Fix by making sure to unmap in mfd_fail_write.

Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mailmap: update Roman Gushchin's email

I'm moving to a @linux.dev account. Map my old addresses.

Link: https://lkml.kernel.org/r/20220221200006.416377-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS, SLAB: add Roman as reviewer, git tree

The slab code has an overlap with kmem accounting, where Roman has done
a lot of work recently and it would be useful to make sure he's CC'd on
patches that potentially affect it.  Thus add him as a reviewer for the
SLAB subsystem.

Also while at it, add the link to slab git tree.

Link: https://lkml.kernel.org/r/20220222103104.13241-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add Shakeel as a memcg co-maintainer

I have been contributing and reviewing to the memcg codebase for last
couple of years.  So, making it official.

Link: https://lkml.kernel.org/r/20220224060148.4092228-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove Vladimir from memcg maintainers

Link: https://lkml.kernel.org/r/4ad1f8da49d7b71c84a0c15bd5347f5ce704e730.1645608825.git.vdavydov.dev@gmail.com
Signed-off-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add Roman as a memcg co-maintainer

Add myself as a memcg co-maintainer.  My primary focus over last few
years was the kernel memory accounting stack, but I do work on some
other parts of the memory controller as well.

Link: https://lkml.kernel.org/r/20220221233951.659048-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftest/vm: fix map_fixed_noreplace test failure

On the latest RHEL the test fails due to executable mapped at 256MB
address

     # ./map_fixed_noreplace
    mmap() @ 0x10000000-0x10050000 p=0xffffffffffffffff result=File exists
    10000000-10010000 r-xp 00000000 fd:04 34905657                           /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
    10010000-10020000 r--p 00000000 fd:04 34905657                           /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
    10020000-10030000 rw-p 00010000 fd:04 34905657                           /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
    10029b90000-10029bc0000 rw-p 00000000 00:00 0                            [heap]
    7fffbb510000-7fffbb750000 r-xp 00000000 fd:04 24534                      /usr/lib64/libc.so.6
    7fffbb750000-7fffbb760000 r--p 00230000 fd:04 24534                      /usr/lib64/libc.so.6
    7fffbb760000-7fffbb770000 rw-p 00240000 fd:04 24534                      /usr/lib64/libc.so.6
    7fffbb780000-7fffbb7a0000 r--p 00000000 00:00 0                          [vvar]
    7fffbb7a0000-7fffbb7b0000 r-xp 00000000 00:00 0                          [vdso]
    7fffbb7b0000-7fffbb800000 r-xp 00000000 fd:04 24514                      /usr/lib64/ld64.so.2
    7fffbb800000-7fffbb810000 r--p 00040000 fd:04 24514                      /usr/lib64/ld64.so.2
    7fffbb810000-7fffbb820000 rw-p 00050000 fd:04 24514                      /usr/lib64/ld64.so.2
    7fffd93f0000-7fffd9420000 rw-p 00000000 00:00 0                          [stack]
    Error: couldn't map the space we need for the test

Fix this by finding a free address using mmap instead of hardcoding
BASE_ADDRESS.

Link: https://lkml.kernel.org/r/20220217083417.373823-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jann Horn <jannh@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix use-after-free bug when mm->mmap is reused after being freed

oom reaping (__oom_reap_task_mm) relies on a 2 way synchronization with
exit_mmap.  First it relies on the mmap_lock to exclude from unlock
path[1], page tables tear down (free_pgtables) and vma destruction.
This alone is not sufficient because mm->mmap is never reset.

For historical reasons[2] the lock is taken there is also MMF_OOM_SKIP
set for oom victims before.

The oom reaper only ever looks at oom victims so the whole scheme works
properly but process_mrelease can opearate on any task (with fatal
signals pending) which doesn't really imply oom victims.  That means
that the MMF_OOM_SKIP part of the synchronization doesn't work and it
can see a task after the whole address space has been demolished and
traverse an already released mm->mmap list.  This leads to use after
free as properly caught up by KASAN report.

Fix the issue by reseting mm->mmap so that MMF_OOM_SKIP synchronization
is not needed anymore.  The MMF_OOM_SKIP is not removed from exit_mmap
yet but it acts mostly as an optimization now.

[1] 27ae357fa82b ("mm, oom: fix concurrent munlock and oom reaper unmap, v3")
[2] 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")

[mhocko@suse.com: changelog rewrite]

Link: https://lore.kernel.org/all/00000000000072ef2c05d7f81950@google.com/
Link: https://lkml.kernel.org/r/20220215201922.1908156-1-surenb@google.com
Fixes: 64591e8605d6 ("mm: protect free_pgtables with mmap_lock write lock in exit_mmap")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: syzbot+2ccf63a4bd07cf39cab0@syzkaller.appspotmail.com
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jan Engelhardt <jengelh@inai.de>
Cc: Tim Murray <timmurray@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: fix a truncation issue in hugepages parameter

When we specify a large number for node in hugepages parameter, it may
be parsed to another number due to truncation in this statement:

node = tmp;

For example, add following parameter in command line:

hugepagesz=1G hugepages=4294967297:5

and kernel will allocate 5 hugepages for node 1 instead of ignoring it.

I move the validation check earlier to fix this issue, and slightly
simplifies the condition here.

Link: https://lkml.kernel.org/r/20220209134018.8242-1-liuyuntao10@huawei.com
Fixes: b5389086ad7be0 ("hugetlbfs: extend the definition of hugepages parameter to support node allocation")
Signed-off-by: Liu Yuntao <liuyuntao10@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: test: prevent cache merging in kmem_cache_double_destroy

With HW_TAGS KASAN and kasan.stacktrace=off, the cache created in the
kmem_cache_double_destroy() test might get merged with an existing one.
Thus, the first kmem_cache_destroy() call won't actually destroy it but
will only decrease the refcount.  This causes the test to fail.

Provide an empty constructor for the created cache to prevent the cache
from getting merged.

Link: https://lkml.kernel.org/r/b597bd434c49591d8af00ee3993a42c609dc9a59.1644346040.git.andreyknvl@google.com
Fixes: f98f966cd750 ("kasan: test: add test case for double-kmem_cache_destroy()")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: fix kernel crash with hugetlb mremap

This fixes the below crash:

  kernel BUG at include/linux/mm.h:2373!
  cpu 0x5d: Vector: 700 (Program Check) at [c00000003c6e76e0]
      pc: c000000000581a54: pmd_to_page+0x54/0x80
      lr: c00000000058d184: move_hugetlb_page_tables+0x4e4/0x5b0
      sp: c00000003c6e7980
     msr: 9000000000029033
    current = 0xc00000003bd8d980
    paca    = 0xc000200fff610100   irqmask: 0x03   irq_happened: 0x01
      pid   = 9349, comm = hugepage-mremap
  kernel BUG at include/linux/mm.h:2373!
    move_hugetlb_page_tables+0x4e4/0x5b0 (link register)
    move_hugetlb_page_tables+0x22c/0x5b0 (unreliable)
    move_page_tables+0xdbc/0x1010
    move_vma+0x254/0x5f0
    sys_mremap+0x7c0/0x900
    system_call_exception+0x160/0x2c0

the kernel can't use huge_pte_offset before it set the pte entry because
a page table lookup check for huge PTE bit in the page table to
differentiate between a huge pte entry and a pointer to pte page.  A
huge_pte_alloc won't mark the page table entry huge and hence kernel
should not use huge_pte_offset after a huge_pte_alloc.

Link: https://lkml.kernel.org/r/20220211063221.99293-1-aneesh.kumar@linux.ibm.com
Fixes: 550a7d60bd5e ("mm, hugepages: add mremap() support for hugepage backed vma")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add sysctl-next git tree

Add a git tree for sysctls as there's been quite a bit of work lately to
remove all the syctls out of kernel/sysctl.c and move to their respective
places, so coordination has been needed to avoid conflicts.  This tree
will also help soak these changes on linux-next prior to getting to Linus.

Link: https://lkml.kernel.org/r/20220218182736.3694508-1-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty: Reserve ldisc 29 for development purposes

It's handy to have an ldisc number free for out-of-tree testing. This
way, a new ldisc can be developed on any running system, without having
to recompile the kernel just to define a new number.

This is the highest number (and also the last one) available under the
old numbering scheme, so let's reserve it before it's too late.

From now on, every new ldisc upstreamed will have to increment NR_LDISCS
in lockstep with its addition to the table in tty.h.

Signed-off-by: Max Staudt <max@enpas.org>
Link: https://lore.kernel.org/r/20220211141036.6403-1-max@enpas.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sunplus-uart: Add Sunplus SoC UART Driver

Add Sunplus SoC UART Driver.
SP7021 UART block contains 5 UARTs.
There are UART0~4 that supported in SP7021, the features list as below.
Support Full-duplex communication.
Support data packet length configurable.
Support stop bit number configurable.
Support force break condition.
Support baud rate configurable.
Support error detection and report.
Support RXD Noise Rejection Vote configurable.

UART0 pinout only support TX/RX two pins.
UART1 to UART4 pinout support TX/RX/CTS/RTS four pins.
Normally UART0 used for kernel console, also can be used for normal uart.
Command line set "console=ttySUP0,115200", SUP means Sunplus Uart Port.
UART driver probe will create path named "/dev/ttySUPx".

https://sunplus.atlassian.net/wiki/spaces/doc/pages/1873412290/13.+Universal+Asynchronous+Receiver+Transmitter+UART

Signed-off-by: Hammer Hsieh <hammerh0314@gmail.com>
Link: https://lore.kernel.org/r/1645522563-17183-3-git-send-email-hammerh0314@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: serial: Add bindings doc for Sunplus SoC UART Driver

Add bindings doc for Sunplus SoC UART Driver

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hammer Hsieh <hammerh0314@gmail.com>
Link: https://lore.kernel.org/r/1645522563-17183-2-git-send-email-hammerh0314@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: Fix race condition in RTS-after-send handling

Set em485->active_timer = NULL isn't always enough to take out the stop
timer. While there is a check that it acts in the right state (i.e.
waiting for RTS-after-send to pass after sending some chars) but the
following might happen:

 - CPU1: some chars send, shifter becomes empty, stop tx timer armed
 - CPU0: more chars send before RTS-after-send expired
 - CPU0: shifter empty irq, port lock taken
 - CPU1: tx timer triggers, waits for port lock
 - CPU0: em485->active_timer = &em485->stop_tx_timer, hrtimer_start(),
   releases lock()
 - CPU1: get lock, see em485->active_timer == &em485->stop_tx_timer,
   tear down RTS too early

This fix bases on research done by Steffen Trumtrar.

Fixes: b86f86e8e7c5 ("serial: 8250: fix potential deadlock in rs485-mode")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220215160236.344236-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: meson: Added S4 SOC compatibility

Make UART driver compatible with S4 SOC UART.

Signed-off-by: Yu Tu <yu.tu@amlogic.com>
Link: https://lore.kernel.org/r/20220225073922.3947-7-yu.tu@amlogic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: meson: The system stuck when you run the stty command on the console to change the baud rate

Start the console and run the following commands in turn:
stty -F /dev/ttyAML0 115200 and stty -F /dev/ttyAML0 921600. The
system will stuck.

Signed-off-by: Yu Tu <yu.tu@amlogic.com>
Link: https://lore.kernel.org/r/20220225073922.3947-6-yu.tu@amlogic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: meson: Make some bit of the REG5 register writable

Make the internal clock source mux and divider writeable, allowing the
uart to deviate from the settings intially applied by the ROMCode and
using the most appropriate clocks.

Signed-off-by: Yu Tu <yu.tu@amlogic.com>
Link: https://lore.kernel.org/r/20220225073922.3947-5-yu.tu@amlogic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame

Using the common Clock code to describe the UART baud rate clock
makes it easier for the UART driver to be compatible with the
baud rate requirements of the UART IP on different meson chips.

Signed-off-by: Yu Tu <yu.tu@amlogic.com>
Link: https://lore.kernel.org/r/20220225073922.3947-4-yu.tu@amlogic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: meson: Use devm_ioremap_resource to get register mapped memory

Replace devm_request_mem_region and devm_ioremap with
devm_ioremap_resource to make the code cleaner.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Yu Tu <yu.tu@amlogic.com>
Link: https://lore.kernel.org/r/20220225073922.3947-3-yu.tu@amlogic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: meson: Move request the register region to probe

This simplifies resetting the UART controller during probe
and will make it easier to integrate the common clock code
which will require the registers at probe time as well.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Yu Tu <yu.tu@amlogic.com>
Link: https://lore.kernel.org/r/20220225073922.3947-2-yu.tu@amlogic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtla/osnoise: Fix error message when failing to enable trace instance

When a trace instance creation fails, tools are printing:

Could not enable -> osnoiser <- tracer for tracing

Print the actual (and correct) name of the tracer it fails to enable.

Link: https://lkml.kernel.org/r/53ef0582605af91eca14b19dba9fc9febb95d4f9.1645206561.git.bristot@kernel.org
Fixes: b1696371d865 ("rtla: Helper functions for rtla")
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

rtla/osnoise: Free params at the exit

The variable that stores the parsed command line arguments are not
being free()d at the rtla osnoise top exit path.

Free params variable before exiting.

Link: https://lkml.kernel.org/r/0be31d8259c7c53b98a39769d60cfeecd8421785.1645206561.git.bristot@kernel.org
Fixes: 1eceb2fc2ca5 ("rtla/osnoise: Add osnoise top mode")
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

rtla/hist: Make -E the short version of --entries

Currently, --entries uses -e as the short version in the hist mode of
timerlat and osnoise tools. But as -e is already used to enable events
on trace sessions by other tools, thus let's keep it available for the
same usage for all rtla tools.

Make -E the short version of --entries for hist mode on all tools.

Note: rtla was merged in this merge window, so rtla was not released yet.

Link: https://lkml.kernel.org/r/5dbf0cbe7364d3a05e708926b41a097c59a02b1e.1645206561.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Fix selftest config check for function graph start up test

CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS is required to test
direct tramp.

Link: https://lkml.kernel.org/r/bdc7e594e13b0891c1d61bc8d56c94b1890eaed7.1640017960.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracefs: Set the group ownership in apply_options() not parse_options()

Al Viro brought it to my attention that the dentries may not be filled
when the parse_options() is called, causing the call to set_gid() to
possibly crash. It should only be called if parse_options() succeeds
totally anyway.

He suggested the logical place to do the update is in apply_options().

Link: https://lore.kernel.org/all/20220225165219.737025658@goodmis.org/
Link: https://lkml.kernel.org/r/20220225153426.1c4cab6b@gandalf.local.home
Cc: stable@vger.kernel.org
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 48b27b6b5191 ("tracefs: Set all files to the same group ownership as the mount option")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge tag 'configfs-5.17-2022-02-25' of git://git.infradead.org/users/hch/configfs

Pull configfs fix from Christoph Hellwig:

 - fix a race in configfs_{,un}register_subsystem (ChenXiaoSong)

* tag 'configfs-5.17-2022-02-25' of git://git.infradead.org/users/hch/configfs:
  configfs: fix a race in configfs_{,un}register_subsystem()

Merge tag 'for-5.17-rc5-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "This is a hopefully last batch of fixes for defrag that got broken in
  5.16, all stable material.

  The remaining reported problem is excessive IO with autodefrag due to
  various conditions in the defrag code not met or missing"

* tag 'for-5.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: reduce extent threshold for autodefrag
  btrfs: autodefrag: only scan one inode once
  btrfs: defrag: don't use merged extent map for their generation check
  btrfs: defrag: bring back the old file extent search behavior
  btrfs: defrag: remove an ambiguous condition for rejection
  btrfs: defrag: don't defrag extents which are already at max capacity
  btrfs: defrag: don't try to merge regular extents with preallocated extents
  btrfs: defrag: allow defrag_one_cluster() to skip large extent which is not a target
  btrfs: prevent copying too big compressed lzo segment

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:

 - Older "does not even boot" regression in qib from July

 - Bug fixes for error unwind in rtrs

 - Avoid a deadlock syzkaller found in srp

 - Fix another UAF syzkaller found in cma

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/cma: Do not change route.addr.src_addr outside state checks
  RDMA/ib_srp: Fix a deadlock
  RDMA/rtrs-clt: Move free_permit from free_clt to rtrs_clt_close
  RDMA/rtrs-clt: Fix possible double free in error case
  IB/qib: Fix duplicate sysfs directory name

Merge tag 'gpio-fixes-for-v5.17-rc6' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - fix an bug generating spurious interrupts in gpio-rockchip

 - fix a race condition in gpiod_to_irq() called by GPIO consumers

* tag 'gpio-fixes-for-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: Return EPROBE_DEFER if gc->to_irq is NULL
  gpio: rockchip: Reset int_bothedge when changing trigger

RDMA/cma: Do not change route.addr.src_addr outside state checks

If the state is not idle then resolve_prepare_src() should immediately
fail and no change to global state should happen. However, it
unconditionally overwrites the src_addr trying to build a temporary any
address.

For instance if the state is already RDMA_CM_LISTEN then this will corrupt
the src_addr and would cause the test in cma_cancel_operation():

           if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev)

Which would manifest as this trace from syzkaller:

  BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26
  Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204

  CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:79 [inline]
   dump_stack+0x141/0x1d7 lib/dump_stack.c:120
   print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232
   __kasan_report mm/kasan/report.c:399 [inline]
   kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416
   __list_add_valid+0x93/0xa0 lib/list_debug.c:26
   __list_add include/linux/list.h:67 [inline]
   list_add_tail include/linux/list.h:100 [inline]
   cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline]
   rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751
   ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102
   ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732
   vfs_write+0x28e/0xa30 fs/read_write.c:603
   ksys_write+0x1ee/0x250 fs/read_write.c:658
   do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
   entry_SYSCALL_64_after_hwframe+0x44/0xae

This is indicating that an rdma_id_private was destroyed without doing
cma_cancel_listens().

Instead of trying to re-use the src_addr memory to indirectly create an
any address derived from the dst build one explicitly on the stack and
bind to that as any other normal flow would do. rdma_bind_addr() will copy
it over the src_addr once it knows the state is valid.

This is similar to commit bc0bdc5afaa7 ("RDMA/cma: Do not change
route.addr.src_addr.ss_family")

Link: https://lore.kernel.org/r/0-v2-e975c8fd9ef2+11e-syz_cma_srcaddr_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: 732d41c545bb ("RDMA/cma: Make the locking for automatic state transition more clear")
Reported-by: syzbot+c94a3675a626f6333d74@syzkaller.appspotmail.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Merge tag 'spi-fix-v5.17-rc5' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A few small driver specific fixes"

* tag 'spi-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: rockchip: terminate dma transmission when slave abort
  spi: rockchip: Fix error in getting num-cs property
  spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op()

Merge tag 'regulator-fix-v5.17-rc5' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A series of fixes for the da9121 driver"

* tag 'regulator-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: da9121: Remove surplus DA9141 parameters
  regulator: da9121: Fix DA914x voltage value
  regulator: da9121: Fix DA914x current values

Merge tag 'regmap-fix-v5.17-rc5' of git://git./linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
 "A fix for interrupt controllers which require the explicit
  acknowledgement of interrupts using a different register to the one
  where interrupts are reported.

  Urgent for the few devices this affects"

* tag 'regmap-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-irq: Update interrupt clear register for proper reset

Merge tag 'thermal-5.17-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull thermal control fix from Rafael Wysocki:
 "Fix a memory leak in the int340x thermal driver's ACPI notify handler
  (Chuansheng Liu)"

* tag 'thermal-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: int340x: fix memory leak in int3400_notify()

Merge tag 'pm-5.17-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "Fix the throttle IRQ handling during cpufreq initialization on
  Qualcomm platforms (Bjorn Andersson)"

* tag 'pm-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: qcom-hw: Delay enabling throttle_irq
  cpufreq: Reintroduce ready() callback

Merge tag 'char-misc-5.17-rc6' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are a few small driver fixes for 5.17-rc6 for reported issues.

  The majority of these are IIO fixes for small things, and the other
  two are a mvmem and mtd core conflict fix.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mtd: core: Fix a conflict between MTD and NVMEM on wp-gpios property
  nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios property
  iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot
  iio: Fix error handling for PM
  iio: addac: ad74413r: correct comparator gpio getters mask usage
  iio: addac: ad74413r: use ngpio size when iterating over mask
  iio: addac: ad74413r: Do not reference negative array offsets
  iio: adc: men_z188_adc: Fix a resource leak in an error handling path
  iio: frequency: admv1013: remove the always true condition
  iio: accel: fxls8962af: add padding to regmap for SPI
  iio:imu:adis16480: fix buffering for devices with no burst mode
  iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits
  iio: adc: tsc2046: fix memory corruption by preventing array overflow

Merge tag 'driver-core-5.17-rc6' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "Here is a single driver core fix for 5.17-rc6. It resolves a reported
  problem when the DMA map of a device is not properly released.

  It has been in linux-next with no reported problems"

* tag 'driver-core-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Free DMA range map when device is released

Merge tag 'staging-5.17-rc6' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for 5.17-rc6.

  It resolves a reported problem in the fbtft fb_st7789v.c driver that
  could cause the display to be flipped in cold weather.

  It has been in linux-next with no reported problems"

* tag 'staging-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: fbtft: fb_st7789v: reset display before initialization

Merge tag 'tty-5.17-rc6' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are some small n_gsm and sc16is7xx serial driver fixes for
  5.17-rc6.

  The n_gsm fixes are from Siemens as it seems they are using the line
  discipline and fixing up a number of issues they found in their
  testing. The sc16is7xx serial driver fix is for a reported problem
  with that chip.

  All of these have been in linux-next with no reported problems"

* tag 'tty-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  sc16is7xx: Fix for incorrect data being transmitted
  tty: n_gsm: fix deadlock in gsmtty_open()
  tty: n_gsm: fix wrong modem processing in convergence layer type 2
  tty: n_gsm: fix wrong tty control line for flow control
  tty: n_gsm: fix NULL pointer access due to DLCI release
  tty: n_gsm: fix proper link termination after failed open
  tty: n_gsm: fix encoding of command/response bit
  tty: n_gsm: fix encoding of control signal octet bit DV

Merge tag 'usb-5.17-rc6' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for 5.17-rc6 to resolve
  reported problems and add new device ids. They include:

   - dwc3:
      - device mapping fix
      - new device ids
      - driver fixes

   - xhci driver fixes

   - gadget driver fixes

   - usb-serial driver device id updates

  All of these have been in linux-next with no reported problems"

* tag 'usb-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: rndis: add spinlock for rndis response list
  usb: dwc3: gadget: Let the interrupt handler disable bottom halves.
  USB: gadget: validate endpoint index for xilinx udc
  USB: serial: option: add Telit LE910R1 compositions
  USB: serial: option: add support for DW5829e
  Revert "USB: serial: ch341: add new Product ID for CH341A"
  usb: dwc2: drd: fix soft connect when gadget is unconfigured
  usb: dwc3: pci: Fix Bay Trail phy GPIO mappings
  tps6598x: clear int mask on probe failure
  xhci: Prevent futile URB re-submissions due to incorrect return value.
  xhci: re-initialize the HC during resume if HCE was set
  usb: dwc3: pci: Add "snps,dis_u2_susphy_quirk" for Intel Bay Trail
  usb: dwc3: pci: add support for the Intel Raptor Lake-S

Merge tag 'ata-5.17-rc6' of git://git./linux/kernel/git/dlemoal/libata

Pull ata fixes from Damien Le Moal:
 "Two fixes for the pata_hpt37x driver, both from Sergey:

   - Fix a PCI register access using an incorrect size (8bits instead of
     16bits)

   - Make sure to always disable the primary channel as it is unused"

* tag 'ata-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_hpt37x: disable primary channel on HPT371
  ata: pata_hpt37x: fix PCI clock detection

tracing/osnoise: Make osnoise_main to sleep for microseconds

osnoise's runtime and period are in the microseconds scale, but it is
currently sleeping in the millisecond's scale. This behavior roots in the
usage of hwlat as the skeleton for osnoise.

Make osnoise to sleep in the microseconds scale. Also, move the sleep to
a specialized function.

Link: https://lkml.kernel.org/r/302aa6c7bdf2d131719b22901905e9da122a11b2.1645197336.git.bristot@kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ftrace: Remove unused ftrace_startup_enable() stub

When building with clang + CONFIG_DYNAMIC_FTRACE=n + W=1, there is a
warning:

  kernel/trace/ftrace.c:7194:20: error: unused function 'ftrace_startup_enable' [-Werror,-Wunused-function]
  static inline void ftrace_startup_enable(int command) { }
                     ^
  1 error generated.

Clang warns on instances of static inline functions in .c files with W=1
after commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").

The ftrace_startup_enable() stub has been unused since
commit e1effa0144a1 ("ftrace: Annotate the ops operation on update"),
where its use outside of the CONFIG_DYNAMIC_TRACE section was replaced
by ftrace_startup_all().  Remove it to resolve the warning.

Link: https://lkml.kernel.org/r/20220214192847.488166-1-nathan@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Ensure trace buffer is at least 4096 bytes large

Booting the kernel with 'trace_buf_size=1' give a warning at
boot during the ftrace selftests:

[    0.892809] Running postponed tracer tests:
[    0.892893] Testing tracer function:
[    0.901899] Callback from call_rcu_tasks_trace() invoked.
[    0.983829] Callback from call_rcu_tasks_rude() invoked.
[    1.072003] .. bad ring buffer .. corrupted trace buffer ..
[    1.091944] Callback from call_rcu_tasks() invoked.
[    1.097695] PASSED
[    1.097701] Testing dynamic ftrace: .. filter failed count=0 ..FAILED!
[    1.353474] ------------[ cut here ]------------
[    1.353478] WARNING: CPU: 0 PID: 1 at kernel/trace/trace.c:1951 run_tracer_selftest+0x13c/0x1b0

Therefore enforce a minimum of 4096 bytes to make the selftest pass.

Link: https://lkml.kernel.org/r/20220214134456.1751749-1-svens@linux.ibm.com
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Uninline trace_trigger_soft_disabled() partly

On a powerpc32 build with CONFIG_CC_OPTIMISE_FOR_SIZE, the inline
keyword is not honored and trace_trigger_soft_disabled() appears
approx 50 times in vmlinux.

Adding -Winline to the build, the following message appears:

./include/linux/trace_events.h:712:1: error: inlining failed in call to 'trace_trigger_soft_disabled': call is unlikely and code size would grow [-Werror=inline]

That function is rather big for an inlined function:

c003df60 <trace_trigger_soft_disabled>:
c003df60: 94 21 ff f0  stwu    r1,-16(r1)
c003df64: 7c 08 02 a6  mflr    r0
c003df68: 90 01 00 14  stw     r0,20(r1)
c003df6c: bf c1 00 08  stmw    r30,8(r1)
c003df70: 83 e3 00 24  lwz     r31,36(r3)
c003df74: 73 e9 01 00  andi.   r9,r31,256
c003df78: 41 82 00 10  beq     c003df88 <trace_trigger_soft_disabled+0x28>
c003df7c: 38 60 00 00  li      r3,0
c003df80: 39 61 00 10  addi    r11,r1,16
c003df84: 4b fd 60 ac  b       c0014030 <_rest32gpr_30_x>
c003df88: 73 e9 00 80  andi.   r9,r31,128
c003df8c: 7c 7e 1b 78  mr      r30,r3
c003df90: 41 a2 00 14  beq     c003dfa4 <trace_trigger_soft_disabled+0x44>
c003df94: 38 c0 00 00  li      r6,0
c003df98: 38 a0 00 00  li      r5,0
c003df9c: 38 80 00 00  li      r4,0
c003dfa0: 48 05 c5 f1  bl      c009a590 <event_triggers_call>
c003dfa4: 73 e9 00 40  andi.   r9,r31,64
c003dfa8: 40 82 00 28  bne     c003dfd0 <trace_trigger_soft_disabled+0x70>
c003dfac: 73 ff 02 00  andi.   r31,r31,512
c003dfb0: 41 82 ff cc  beq     c003df7c <trace_trigger_soft_disabled+0x1c>
c003dfb4: 80 01 00 14  lwz     r0,20(r1)
c003dfb8: 83 e1 00 0c  lwz     r31,12(r1)
c003dfbc: 7f c3 f3 78  mr      r3,r30
c003dfc0: 83 c1 00 08  lwz     r30,8(r1)
c003dfc4: 7c 08 03 a6  mtlr    r0
c003dfc8: 38 21 00 10  addi    r1,r1,16
c003dfcc: 48 05 6f 6c  b       c0094f38 <trace_event_ignore_this_pid>
c003dfd0: 38 60 00 01  li      r3,1
c003dfd4: 4b ff ff ac  b       c003df80 <trace_trigger_soft_disabled+0x20>

However it is located in a hot path so inlining it is important.
But forcing inlining of the entire function by using __always_inline
leads to increasing the text size by approx 20 kbytes.

Instead, split the fonction in two parts, one part with the likely
fast path, flagged __always_inline, and a second part out of line.

With this change, on a powerpc32 with CONFIG_CC_OPTIMISE_FOR_SIZE
vmlinux text increases by only 1,4 kbytes, which is partly
compensated by a decrease of vmlinux data by 7 kbytes.

On ppc64_defconfig which has CONFIG_CC_OPTIMISE_FOR_SPEED, this
change reduces vmlinux text by more than 30 kbytes.

Link: https://lkml.kernel.org/r/69ce0986a52d026d381d612801d978aa4f977460.1644563295.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

eprobes: Remove redundant event type information

Currently, the event probes save the type of the event they are attached
to when recording the event. For example:

  # echo 'e:switch sched/sched_switch prev_state=$prev_state prev_prio=$prev_prio next_pid=$next_pid next_prio=$next_prio' > dynamic_events
  # cat events/eprobes/switch/format

 name: switch
 ID: 1717
 format:
        field:unsigned short common_type;       offset:0;       size:2; signed:0;
        field:unsigned char common_flags;       offset:2;       size:1; signed:0;
        field:unsigned char common_preempt_count;       offset:3;       size:1; signed:0;
        field:int common_pid;   offset:4;       size:4; signed:1;

        field:unsigned int __probe_type;        offset:8;       size:4; signed:0;
        field:u64 prev_state;   offset:12;      size:8; signed:0;
        field:u64 prev_prio;    offset:20;      size:8; signed:0;
        field:u64 next_pid;     offset:28;      size:8; signed:0;
        field:u64 next_prio;    offset:36;      size:8; signed:0;

 print fmt: "(%u) prev_state=0x%Lx prev_prio=0x%Lx next_pid=0x%Lx next_prio=0x%Lx", REC->__probe_type, REC->prev_state, REC->prev_prio, REC->next_pid, REC->next_prio

The __probe_type adds 4 bytes to every event.

One of the reasons for creating eprobes is to limit what is traced in an
event to be able to limit what is written into the ring buffer. Having
this redundant 4 bytes to every event takes away from this.

The event that is recorded can be retrieved from the event probe itself,
that is available when the trace is happening. For user space tools, it
could simply read the dynamic_event file to find the event they are for.
So there is really no reason to write this information into the ring
buffer for every event.

Link: https://lkml.kernel.org/r/20220218190057.2f5a19a8@gandalf.local.home
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Have traceon and traceoff trigger honor the instance

If a trigger is set on an event to disable or enable tracing within an
instance, then tracing should be disabled or enabled in the instance and
not at the top level, which is confusing to users.

Link: https://lkml.kernel.org/r/20220223223837.14f94ec3@rorschach.local.home
Cc: stable@vger.kernel.org
Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables")
Tested-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tty: serial: amba-pl010: use more uart_port pointers

The code uses uart_amba_port::port on many places. Sometimes it even
needs not uart_amba_port itself. So simplify the code on many places
and remove the need of uart_amba_port on some places completely.

No functional changes intended. The objdump -d output shows only a code
move in pl010_rx_chars().

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220224111028.20917-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: lpc32xx_hs: use serial_lpc32xx_stop_tx() helper

Instead of open-coding what serial_lpc32xx_stop_tx() already does, call
it in __serial_lpc32xx_tx() directly.

Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220224111028.20917-6-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: serial_txx9: remove info print from init

Remove the hello print among with version and name definitions. Drivers
should print nothing if they are successful.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220224111028.20917-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned

All these return bitmasks, so it makes more sense to return unsigned --
this is what a reader and also all the callers expect.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220224111028.20917-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>