Adam Sampson [Tue, 24 Oct 2017 20:14:46 +0000 (16:14 -0400)]
media: usbtv: fix brightness and contrast controls
Because the brightness and contrast controls share a register,
usbtv_s_ctrl needs to read the existing values for both controls before
inserting the new value. However, the code accidentally wrote to the
registers (from an uninitialised stack array), rather than reading them.
The user-visible effect of this was that adjusting the brightness would
also set the contrast to a random value, and vice versa -- so it wasn't
possible to correctly adjust the brightness of usbtv's video output.
Tested with an "EasyDAY" UTV007 device.
Fixes:
c53a846c48f2 ("usbtv: add video controls")
Signed-off-by: Adam Sampson <ats@offog.org>
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kees Cook [Tue, 24 Oct 2017 15:23:21 +0000 (11:23 -0400)]
media: s2255: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Cc: Mike Isely <isely@pobox.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kees Cook [Tue, 24 Oct 2017 15:23:03 +0000 (11:23 -0400)]
media: radio: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kees Cook [Tue, 24 Oct 2017 15:22:42 +0000 (11:22 -0400)]
media: pci: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Sergey Kozlov <serjk@netup.ru>
Cc: Abylay Ospan <aospan@netup.ru>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Geliang Tang <geliangtang@gmail.com>
Cc: Sean Young <sean@mess.org>
Cc: "Pali Rohár" <pali.rohar@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
[hans.verkuil@cisco.com: dropped pci/ttpci/av7110_ir.c patch chunk]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Hans Verkuil [Sat, 21 Oct 2017 08:37:49 +0000 (04:37 -0400)]
media: tegra-cec: fix messy probe() cleanup
The probe() cleanup code ('goto foo_error') was very messy. It appears
that this code wasn't updated when I switched to the devm_ functions
in an earlier version.
Update the code to use 'return error' where it can and do proper cleanup
where it needs to.
Note that the original code wasn't buggy, it was just messy.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Jaejoong Kim [Fri, 20 Oct 2017 07:25:28 +0000 (03:25 -0400)]
media: usb: usbtv: remove duplicate & operation
usb_endpoint_maxp() has an inline keyword and searches for bits[10:0]
by & operation with 0x7ff. So, we can remove the duplicate & operation
with 0x7ff.
Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Arnd Bergmann [Thu, 19 Oct 2017 09:30:34 +0000 (05:30 -0400)]
media: rockchip/rga: annotate PM functions as __maybe_unused
The newly added driver has incorrect #ifdef annotations on its
PM functions, leading to a harmless compile-time warning when
CONFIG_PM is disabled:
drivers/media/platform/rockchip/rga/rga.c:760:13: error: 'rga_disable_clocks' defined but not used [-Werror=unused-function]
static void rga_disable_clocks(struct rockchip_rga *rga)
^~~~~~~~~~~~~~~~~~
drivers/media/platform/rockchip/rga/rga.c:728:12: error: 'rga_enable_clocks' defined but not used [-Werror=unused-function]
This removes the #ifdef and marks the functions as __maybe_unused,
so gcc can silently drop all the unused code.
Fixes:
f7e7b48e6d79 ("[media] rockchip/rga: v4l2 m2m support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Hans Verkuil [Wed, 18 Oct 2017 08:11:46 +0000 (04:11 -0400)]
media: cec-pin: use IS_ERR instead of PTR_ERR_OR_ZERO
cec_allocate_adapter never returns NULL, so just use IS_ERR instead of
PTR_ERR_OR_ZERO.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Ricardo Ribalda [Tue, 17 Oct 2017 15:48:50 +0000 (11:48 -0400)]
media: v4l2-ctrl: Fix flags field on Control events
VIDIOC_DQEVENT and VIDIOC_QUERY_EXT_CTRL should give the same output for
the control flags field.
This patch creates a new function user_flags(), that calculates the user
exported flags value (which is different than the kernel internal flags
structure). This function is then used by all the code that exports the
internal flags to userspace.
Reported-by: Dimitrios Katsaros <patcherwork@gmail.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v3.17 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Bhumika Goyal [Tue, 17 Oct 2017 12:27:25 +0000 (08:27 -0400)]
media: davinci: make ccdc_hw_device structures const
Make these structures const as they are only getting passed to the
functions vpfe_{register/unregister}_ccdc_device having the argument as
const.
Structures found using Coccinelle and changes done by hand.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Bhumika Goyal [Tue, 17 Oct 2017 12:27:24 +0000 (08:27 -0400)]
media: davinci: make function arguments const
Make the function arguments of functions vpfe_{register/unregister}_ccdc_device
const as the pointer dev does not modify the fields of the structure
it points to. Also, declare the variable ccdc_dev const as it points to the
same structure as dev but it does not modify the fields as well.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kees Cook [Mon, 16 Oct 2017 23:11:30 +0000 (19:11 -0400)]
media: saa7134: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kees Cook [Mon, 16 Oct 2017 23:10:53 +0000 (19:10 -0400)]
media: tvaudio: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kees Cook [Mon, 16 Oct 2017 23:10:47 +0000 (19:10 -0400)]
media: dvb-core: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: devendra sharma <devendra.sharma9091@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kees Cook [Mon, 16 Oct 2017 23:10:42 +0000 (19:10 -0400)]
media: saa7146: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kees Cook [Mon, 16 Oct 2017 23:10:27 +0000 (19:10 -0400)]
media: tc358743: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kees Cook [Mon, 16 Oct 2017 23:10:12 +0000 (19:10 -0400)]
media: media/saa7146: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. This requires adding a pointer to
hold the timer's target file, as there won't be a way to pass this in the
future.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Bhumika Goyal [Wed, 27 Sep 2017 08:38:29 +0000 (04:38 -0400)]
media: radio-si470x: make si470x_viddev_template const
Make this const as it is only used in a copy operation in the files
referencing it. Add const to declaration in the header too.
Structure found using Coccienlle and changes done by hand.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Bhumika Goyal [Wed, 27 Sep 2017 08:05:43 +0000 (04:05 -0400)]
media: cx231xx: make cx231xx_vbi_qops const
Make this const as it is only passed to the const argument of the
function videobuf_queue_vmalloc_init in the file referencing it.
Also, make the declaration in the header const.
Structure found using Coccienlle and changes done by hand.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Markus Elfring [Sun, 24 Sep 2017 09:00:57 +0000 (05:00 -0400)]
media: omap_vout: Fix a possible null pointer dereference in omap_vout_open()
Move a debug message so that a null pointer access can not happen
for the variable "vout" in this function.
Fixes:
5c7ab6348e7b3fcca2b8ee548306c774472971e2 ("V4L/DVB: V4L2: Add support for OMAP2/3 V4L2 display driver on top of DSS2")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Oleh Kravchenko [Sat, 28 Oct 2017 13:38:20 +0000 (09:38 -0400)]
media: cx231xx: Fix NTSC/PAL on Astrometa T2hybrid
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Oleh Kravchenko [Sat, 28 Oct 2017 13:38:19 +0000 (09:38 -0400)]
media: cx231xx: Fix NTSC/PAL on Evromedia USB Full Hybrid Full HD
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Oleh Kravchenko [Sat, 28 Oct 2017 13:38:18 +0000 (09:38 -0400)]
media: rc: mceusb: add support for 15f4:0135
Astrometa T2hybrid (15f4:0135) has IR on Interface 0.
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Oleh Kravchenko [Sat, 28 Oct 2017 13:38:17 +0000 (09:38 -0400)]
media: rc: Add Astrometa T2hybrid keymap module
Add the keymap module for Astrometa T2hybrid remote control commands.
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Oleh Kravchenko [Sat, 28 Oct 2017 13:38:16 +0000 (09:38 -0400)]
media: rc: mceusb: add support for 1b80:d3b2
Evromedia USB Full Hybrid Full HD (1b80:d3b2) has IR on Interface 0.
Remote controller supplied with this tuner fully compatible
with RC_MAP_MSI_DIGIVOX_III.
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kees Cook [Tue, 24 Oct 2017 15:23:14 +0000 (11:23 -0400)]
media: rc: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: "Antti Seppälä" <a.seppala@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: "David Härdeman" <david@hardeman.nu>
Cc: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sakari Ailus [Fri, 27 Oct 2017 10:35:11 +0000 (06:35 -0400)]
media: staging: atomisp: Add videobuf2 switch to TODO
The atomisp driver uses the videobuf1 framework for buffer management. The
framework is being removed; switch to videobuf2 needs to be made. There
are only a handful of remaining non-staging drivers using videobuf1.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kees Cook [Tue, 24 Oct 2017 08:22:11 +0000 (04:22 -0400)]
media: staging: atomisp: i2c: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Andy Shevchenko [Wed, 27 Sep 2017 18:25:08 +0000 (14:25 -0400)]
media: staging: atomisp: Remove FSF snail address
Snail address is subject to change, remove it completely from the code.
This has been done using the following script:
sed -i '/You should/,/02110-1301/d' \
$(git grep -n -w Franklin -- drivers/staging/media/atomisp/ | cut -f1 -d:)
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Andy Shevchenko [Wed, 27 Sep 2017 18:25:06 +0000 (14:25 -0400)]
media: staging: atomisp: Remove Gmin dead code #2
media/lm3642.h is not used anywhere. Moreover, there is a driver under
LEDs framework for very same IP which would be used anyway.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Andy Shevchenko [Wed, 27 Sep 2017 18:25:05 +0000 (14:25 -0400)]
media: staging: atomisp: Remove Gmin dead code #1
struct camera_af_platform_data and bound functions are not used anywhere.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Andy Shevchenko [Wed, 27 Sep 2017 18:25:04 +0000 (14:25 -0400)]
media: staging: atomisp: Remove unused members of camera_sensor_platform_data
Remove unused members along with dead code.
Mostly done with help of coccinelle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Andy Shevchenko [Wed, 27 Sep 2017 18:25:07 +0000 (14:25 -0400)]
media: staging: atomisp: Remove duplicate declaration in header
There are 3 declarations that are present in atomisp_platform.h and
atomisp_gmin_platform.h. Remove duplications from the latter.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Andy Shevchenko [Wed, 27 Sep 2017 18:25:03 +0000 (14:25 -0400)]
media: staging: atomisp: Remove ->power_ctrl() callback
There is redundant callback which does nothing in upstreamed version of
the driver.
Remove it along with user call places.
Mostly done with help of coccinelle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Andy Shevchenko [Wed, 27 Sep 2017 18:25:02 +0000 (14:25 -0400)]
media: staging: atomisp: Remove ->gpio_ctrl() callback
There is redundant callback which does nothing in upstreamed version of
the driver.
Remove it along with user call places.
Mostly done with help of coccinelle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Andy Shevchenko [Wed, 27 Sep 2017 18:25:01 +0000 (14:25 -0400)]
media: staging: atomisp: Remove unneeded gpio.h inclusion
GPIO handling is done only in two modules, the rest do not need to
include linux/gpio.h header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Andy Shevchenko [Wed, 27 Sep 2017 18:25:00 +0000 (14:25 -0400)]
media: staging: atomisp: Do not set GPIO twice
gpiod_get() configures GPIO line at the time of successful request.
Thus, no need to do this explicitly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Andy Shevchenko [Wed, 27 Sep 2017 18:24:59 +0000 (14:24 -0400)]
media: staging: atomisp: Switch i2c drivers to use ->probe_new()
Since most of the drivers are being used on ACPI enabled platforms
there is no need to keep legacy API support for them. Thus, switch
to ->probe_new() callback and remove orphaned code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Andy Shevchenko [Wed, 27 Sep 2017 18:24:58 +0000 (14:24 -0400)]
media: staging: atomisp: Use module_i2c_driver() macro
This is done using coccinelle semantic patch:
//<smpl>
@a@
identifier f, x;
@@
-static f(...) { return i2c_add_driver(&x); }
@b depends on a@
identifier e, a.x;
@@
-static e(...) { i2c_del_driver(&x); }
@c depends on a && b@
identifier a.f;
declarer name module_init;
@@
-module_init(f);
@d depends on a && b && c@
identifier b.e, a.x;
declarer name module_exit;
declarer name module_i2c_driver;
@@
-module_exit(e);
+module_i2c_driver(x);
//</smpl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Andy Shevchenko [Wed, 27 Sep 2017 18:24:57 +0000 (14:24 -0400)]
media: staging: atomisp: Remove AP1302 sensor support
This sensor is not used by any known ACPI-enabled platform
(and no kernel users for it so far).
Just remove it for good until we get a platform which actually uses it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Andy Shevchenko [Wed, 27 Sep 2017 18:24:56 +0000 (14:24 -0400)]
media: staging: atomisp: Remove IMX sensor support
This sensor is not used by any known ACPI-enabled platform
(and no kernel users for it so far).
Just remove it for good until we get a platform which actually uses it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kees Cook [Thu, 5 Oct 2017 00:47:38 +0000 (20:47 -0400)]
media: staging: atomisp: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Daeseok Youn <daeseok.youn@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: devel@driverdev.osuosl.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Aishwarya Pant [Tue, 17 Oct 2017 13:14:47 +0000 (09:14 -0400)]
media: staging: atomisp: cleanup out of memory messages
Logging of explicit out of memory messages is redundant since memory allocation
failures produce a backtrace.
Done with the help of the following cocci script:
@@
expression ex, ret;
statement s;
constant char[] c;
constant err;
identifier f, l;
@@
ex =
\(kmalloc\|kmalloc_array\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\|
kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\|devm_kzalloc\)(...)
... when != ex
if (
(
!ex
|
unlikely(!ex)
)
)
- {
- f(..., c, ...);
(
return ex;
|
return;
|
return err;
|
goto l;
)
- }
else s
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Srishti Sharma [Sat, 7 Oct 2017 13:52:02 +0000 (09:52 -0400)]
media: Staging: media: atomisp: pci: Eliminate use of typedefs for struct
The use of typedefs for struct is discouraged, and hence can be
eliminated. Done using the following semantic patch by coccinelle.
@r1@
type T;
@@
typedef struct {...} T;
@script: python p@
T << r1.T;
T1;
@@
if T[-2:] == "_t" or T[-2:] == "_T":
coccinelle.T1 = T[:-2]
else:
coccinelle.T1 = T
print T, T1
@r2@
type r1.T;
identifier p.T1;
@@
- typedef
struct
+ T1
{
...
}
- T
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Mauro Carvalho Chehab [Tue, 31 Oct 2017 09:32:02 +0000 (05:32 -0400)]
media: atmel-isc: get rid of an unused var
drivers/media/platform/atmel/atmel-isc.c: In function 'isc_async_complete':
drivers/media/platform/atmel/atmel-isc.c:1900:28: warning: variable 'sd_entity' set but not used [-Wunused-but-set-variable]
struct isc_subdev_entity *sd_entity;
^~~~~~~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Younian Wang [Thu, 19 Oct 2017 19:43:30 +0000 (21:43 +0200)]
media: rc/keymaps: add support for RC of hisilicon poplar board
This is a NEC protocol type remote controller distributed with
96boards poplar@tocoding board.
Signed-off-by: Younian Wang <wangyounian@hisilicon.com>
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Younian Wang [Thu, 19 Oct 2017 19:43:29 +0000 (21:43 +0200)]
media: rc/keymaps: add support for RC of hisilicon TV demo boards
This is a NEC protocol type remote controller distributed with
hisilicon TV demo boards.
Signed-off-by: Younian Wang <wangyounian@hisilicon.com>
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Kees Cook [Mon, 16 Oct 2017 23:10:36 +0000 (01:10 +0200)]
media: serial_ir: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Arvind Yadav [Mon, 9 Oct 2017 18:14:48 +0000 (20:14 +0200)]
media: imon: Fix null-ptr-deref in imon_probe
It seems that the return value of usb_ifnum_to_if() can be NULL and
needs to be checked.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Aishwarya Pant [Tue, 17 Oct 2017 13:14:09 +0000 (15:14 +0200)]
media: staging: atomisp2: cleanup null check on memory allocation
For memory allocation functions that fail with a NULL return value, it
is preferred to use the (!x) test in place of (x == NULL).
Changes in atomisp2/css2400/sh_css.c were done by hand.
Done with the help of the following cocci script:
@@
type T;
T* p;
statement s,s1;
@@
p =
\(devm_kzalloc\|devm_ioremap\|usb_alloc_urb\|alloc_netdev\|dev_alloc_skb\|
kmalloc\|kmalloc_array\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\|
kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\|devm_kzalloc\)(...)
...when != p
if (
- p == NULL
+ !p
) s
else s1
--
Changes in v3:
Rebase changes over atomisp-next branch of the media tree
Changes in atomisp2/css2400/sh_css.c were done by hand, the above script
was not able to match the pattern if (a->b != null).
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans de Goede [Mon, 16 Oct 2017 12:34:48 +0000 (14:34 +0200)]
media: staging: media: atomisp: Fix oops by unbalanced clk enable/disable call
The common-clk core expects clk consumers to always call enable/disable
in a balanced manner. The atomisp driver does not call gmin_flisclk_ctrl()
in a balanced manner, so add a clock_on bool and skip redundant calls.
This fixes kernel oops like this one:
[ 19.811613] gc0310_s_config S
[ 19.811655] ------------[ cut here ]------------
[ 19.811664] WARNING: CPU: 1 PID: 720 at drivers/clk/clk.c:594 clk_core_disabl
[ 19.811666] Modules linked in: tpm_crb(+) snd_soc_sst_atom_hifi2_platform tpm
[ 19.811744] CPU: 1 PID: 720 Comm: systemd-udevd Tainted: G C OE 4.1
[ 19.811746] Hardware name: Insyde T701/T701, BIOS BYT70A.YNCHENG.WIN.007 08/2
[ 19.811749] task:
ffff988df7ab2500 task.stack:
ffffac1400474000
[ 19.811752] RIP: 0010:clk_core_disable+0xc0/0x130
...
[ 19.811775] Call Trace:
[ 19.811783] clk_core_disable_lock+0x1f/0x30
[ 19.811788] clk_disable+0x1f/0x30
[ 19.811794] gmin_flisclk_ctrl+0x87/0xf0
[ 19.811801] 0xffffffffc0528512
[ 19.811805] 0xffffffffc05295e2
[ 19.811811] ? acpi_device_wakeup_disable+0x50/0x60
[ 19.811815] ? acpi_dev_pm_attach+0x8e/0xd0
[ 19.811818] ? 0xffffffffc05294d0
[ 19.811823] i2c_device_probe+0x1cd/0x280
[ 19.811828] driver_probe_device+0x2ff/0x450
Fixes: "staging: atomisp: use clock framework for camera clocks"
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Tue, 17 Oct 2017 11:05:11 +0000 (13:05 +0200)]
media: tc358743: validate lane count
The TC358743 does not support more than 4 data lanes. Check that the
lane count is valid.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Jacob Chen [Sun, 1 Oct 2017 10:22:38 +0000 (12:22 +0200)]
media: i2c: OV5647: change to use macro for the registers
ref docuemnt:
ov5647-datasheet-v1.00-2009
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Reviewed-by: Luis Oliveira <lolivei@synopsys.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Jacob Chen [Sun, 1 Oct 2017 10:22:37 +0000 (12:22 +0200)]
media: i2c: OV5647: ensure clock lane in LP-11 state before streaming on
When I was supporting Rpi Camera Module on the ASUS Tinker board,
I found this driver have some issues with rockchip's mipi-csi driver.
It didn't place clock lane in LP-11 state before performing
D-PHY initialisation.
>From our experience, on some OV sensors,
LP-11 state is not achieved while BIT(5)-0x4800 is cleared.
So let's set BIT(5) and BIT(0) both while not streaming, in order to
coax the clock lane into LP-11 state.
0x4800 : MIPI CTRL 00
BIT(5) : clock lane gate enable
0: continuous
1: none-continuous
BIT(0) : manually set clock lane
0: Not used
1: used
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Reviewed-by: Luis Oliveira <lolivei@synopsys.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wenyou Yang [Mon, 16 Oct 2017 03:14:27 +0000 (05:14 +0200)]
media: ov7670: Add the ov7670_s_power function
Add the ov7670_s_power function which is responsible for
manipulating the power dowm mode through the PWDN pin and the reset
operation through the RESET pin, and keep it powered at all times.
[sakari.ailus@linux.intel.com: set pwdn_gpio direction only once]
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wenyou Yang [Mon, 16 Oct 2017 03:14:26 +0000 (05:14 +0200)]
media: ov7670: Add the get_fmt callback
Add the get_fmt callback, also enable V4L2_SUBDEV_FL_HAS_DEVNODE flag
to make this subdev has device node.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wenyou Yang [Mon, 16 Oct 2017 03:14:25 +0000 (05:14 +0200)]
media: ov7670: Add entity pads initialization
Add the media entity pads initialization.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Sat, 15 Jul 2017 08:51:00 +0000 (10:51 +0200)]
media: tegra-cec: add Tegra HDMI CEC driver
This driver adds support for the Tegra CEC IP. It is based on the
NVIDIA drivers/misc/tegra-cec driver in their 3.10 kernel.
This has been converted to the CEC framework and cleaned up.
Tested with my Jetson TK1 board. It has also been tested with the
Tegra X1 in an embedded product.
Note of warning for the Tegra X2: this SoC supports two HDMI outputs,
but only one CEC adapter and the CEC bus is shared between the
two outputs. This is a design mistake and the CEC adapter can
control only one HDMI output. Never hook up both HDMI outputs
to the CEC bus in a hardware design: this is illegal as per the
CEC specification.
The CEC bus can be shared between multiple inputs and zero or one
outputs, but not between multiple outputs.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Sat, 15 Jul 2017 08:51:24 +0000 (10:51 +0200)]
media: dt-bindings: document the tegra CEC bindings
This documents the binding for the Tegra CEC module.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Jérémy Lefaure [Sun, 1 Oct 2017 19:30:54 +0000 (21:30 +0200)]
media: staging: atomisp: use ARRAY_SIZE
Using the ARRAY_SIZE macro improves the readability of the code. Also,
it is useless to use a variable to store this constant calculated at
compile time.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Muhammad Falak R Wani [Sat, 23 Sep 2017 19:45:34 +0000 (21:45 +0200)]
media: staging/atomisp: make six local functions static to appease sparse
The functions __bo_alloc, __bo_search_and_remove_from_free_rbtree,
__bo_search_by_addr, __bo_search_by_addr_in_range, __bo_break_up and
__bo_merge are local to the source and do not need to be in the global
scope, so make them static.
Cleans up sparse warnings:
warning: symbol '__bo_alloc' was not declared. Should it be static?
warning: symbol '__bo_search_and_remove_from_free_rbtree' was not declared. Should it be static?
warning: symbol '__bo_search_by_addr' was not declared. Should it be static?
warning: symbol '__bo_search_by_addr_in_range' was not declared. Should it be static?
warning: symbol '__bo_break_up' was not declared. Should it be static?
warning: symbol '__bo_merge' was not declared. Should it be static?
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Sakari Ailus [Mon, 25 Sep 2017 11:17:31 +0000 (13:17 +0200)]
media: staging: atomisp: Update TODO regarding sensors
There was no specific item regarding what should be done to sensor, lens
and flash drivers. Add one, to replace the vague item denoting support
only to particular sensor, lens and flash devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Sakari Ailus [Mon, 11 Sep 2017 22:46:32 +0000 (00:46 +0200)]
media: staging: atomisp: Add driver prefix to Kconfig option and module names
By adding the "atomisp-" prefix to module names (and "ATOMISP_" to Kconfig
options), the staging drivers for e.g. sensors are labelled as being
specific to atomisp, which they effectively are.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Sakari Ailus [Thu, 14 Sep 2017 10:06:26 +0000 (12:06 +0200)]
media: staging: media: MAINTAINERS: Add entry for atomisp driver
Add the maintainers entry to the atomisp staging media driver.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Leon Luo [Thu, 5 Oct 2017 00:06:21 +0000 (02:06 +0200)]
media: imx274: V4l2 driver for Sony imx274 CMOS sensor
The imx274 is a Sony CMOS image sensor that has 1/2.5 image size.
It supports up to 3840x2160 (4K) 60fps, 1080p 120fps. The interface
is 4-lane MIPI CSI-2 running at 1.44Gbps each.
This driver has been tested on Xilinx ZCU102 platform with a Leopard
LI-IMX274MIPI-FMC camera board.
Support for the following features:
-Resolutions: 3840x2160, 1920x1080, 1280x720
-Frame rate: 3840x2160 : 5 – 60fps
1920x1080 : 5 – 120fps
1280x720 : 5 – 120fps
-Exposure time: 16 – (frame interval) micro-seconds
-Gain: 1x - 180x
-VFLIP: enable/disabledrivers/media/i2c/imx274.c
-Test pattern: 12 test patterns
Signed-off-by: Leon Luo <leonl@leopardimaging.com>
Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Leon Luo [Thu, 5 Oct 2017 00:06:20 +0000 (02:06 +0200)]
media: imx274: device tree binding file
The binding file for imx274 CMOS sensor V4l2 driver
Signed-off-by: Leon Luo <leonl@leopardimaging.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Thu, 21 Sep 2017 15:32:11 +0000 (17:32 +0200)]
media: tc358743: set entity function to video interface bridge
The TC358743 is an HDMI to MIPI CSI2-2 bridge.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Tim Harvey [Mon, 18 Sep 2017 23:08:16 +0000 (01:08 +0200)]
media: imx: Fix VDIC CSI1 selection
When using VDIC with CSI1, make sure to select the correct CSI in
IPU_CONF.
Fixes:
f0d9c8924e2c3376 ("[media] media: imx: Add IC subdev drivers")
Suggested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Dan Carpenter [Thu, 28 Sep 2017 13:03:54 +0000 (15:03 +0200)]
media: tc358743: remove an unneeded condition
We can remove the check for if "state->cec_adap" is NULL. The
cec_allocate_adapter() function never returns NULL and also we verified
that "state->cec_adap" is an error pointer.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Bhumika Goyal [Wed, 27 Sep 2017 17:08:19 +0000 (19:08 +0200)]
media: au0828/em28xx: make vb2_ops const
Make vb2_ops const as they are only stored in the const field of a
vb2_queue structure. Make the declarations const too.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Bhumika Goyal [Wed, 27 Sep 2017 16:59:06 +0000 (18:59 +0200)]
media: cx23885/saa7134: make vb2_ops const
Make vb2_ops const as they are only stored in the const field of a
vb2_queue structure. Make the declarations const too.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Bhumika Goyal [Wed, 27 Sep 2017 14:16:47 +0000 (16:16 +0200)]
media: zoran: make zoran_template const
Make this const as it is only used in a copy operation in the file
referencing it. Make the declaration const too.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Bhumika Goyal [Wed, 27 Sep 2017 13:59:42 +0000 (15:59 +0200)]
media: bt8xx: make bttv_vbi_qops const
Make this const as it is only passed to the const argument of the
function videobuf_queue_sg_init in the file referencing it.
Also, make the declaration in the header const.
Structure found using Coccinelle and changes done by hand.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Arvind Yadav [Wed, 20 Sep 2017 09:40:58 +0000 (11:40 +0200)]
media: coda: Handle return value of kasprintf
kasprintf() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Jacob Chen [Mon, 18 Sep 2017 04:00:51 +0000 (06:00 +0200)]
media: i2c: tc358743: fix spelling mistake
It should be "LP-11".
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Markus Elfring [Thu, 14 Sep 2017 12:34:39 +0000 (14:34 +0200)]
media: tm6000: cleanup trival coding style issues
- Delete seven error messages for a failed memory allocation
- Adjust seven checks for null pointers
- Use common error handling code in tm6000_usb_probe()
- Adjust jump targets so that the function "kfree" will be always called
with a non-null pointer.
- Delete an initialisation for the local variable "dev"
which became unnecessary with this refactoring.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Fri, 13 Oct 2017 16:01:32 +0000 (18:01 +0200)]
media: cec-pin.h: move non-kAPI parts into cec-pin-priv.h
The kAPI cec-pin.h header also defined data structures that did
not belong here but were private to the CEC core code.
Split that part off into a cec-pin-priv.h header.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Stanimir Varbanov [Fri, 13 Oct 2017 14:13:17 +0000 (16:13 +0200)]
media: venus: reimplement decoder stop command
This addresses the wrong behavior of decoder stop command by
rewriting it. These new implementation enqueue an empty buffer
on the decoder input buffer queue to signal end-of-stream. The
client should stop queuing buffers on the V4L2 Output queue
and continue queuing/dequeuing buffers on Capture queue. This
process will continue until the client receives a buffer with
V4L2_BUF_FLAG_LAST flag raised, which means that this is last
decoded buffer with data.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v4.13 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wei Yongjun [Wed, 11 Oct 2017 11:16:43 +0000 (13:16 +0200)]
media: vimc: Fix return value check in vimc_add_subdevs()
In case of error, the function platform_device_register_data() returns
ERR_PTR() and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Stanimir Varbanov [Tue, 10 Oct 2017 07:52:36 +0000 (09:52 +0200)]
media: venus: venc: fix bytesused v4l2_plane field
This fixes wrongly filled bytesused field of v4l2_plane structure
by include data_offset in the plane, Also fill data_offset and
bytesused for capture type of buffers only.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v4.13 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wenyou Yang [Tue, 10 Oct 2017 02:46:40 +0000 (04:46 +0200)]
media: atmel-isc: Rework the format list
To improve the readability of code, split the format array into two,
one for the format description, other for the register configuration.
Meanwhile, add the flag member to indicate the format can be achieved
from the sensor or be produced by the controller, and rename members
related to the register configuration.
Also add more formats support: GREY, ARGB444, ARGB555 and ARGB32.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wenyou Yang [Tue, 10 Oct 2017 02:46:39 +0000 (04:46 +0200)]
media: atmel-isc: Remove unnecessary member
Remove the memeber *config from the isc_subdev_entity struct,
the member is useless afterward.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wenyou Yang [Tue, 10 Oct 2017 02:46:38 +0000 (04:46 +0200)]
media: atmel-isc: Enable the clocks during probe
To meet the relationship, enable the HCLOCK and ispck during the
device probe, "isc_pck frequency is less than or equal to isc_ispck,
and isc_ispck is greater than or equal to HCLOCK."
Meanwhile, call the pm_runtime_enable() in the right place.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wenyou Yang [Tue, 10 Oct 2017 02:46:37 +0000 (04:46 +0200)]
media: atmel-isc: Add prepare and unprepare ops
A software write operation to the ISC_CLKEN or ISC_CLKDIS register
requires double clock domain synchronization and is not permitted
when the ISC_SR.SIP is asserted. So add the .prepare and .unprepare
ops to make sure the ISC_CLKSR.SIP is unasserted before the write
operation to the ISC_CLKEN or ISC_CLKDIS register.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wenyou Yang [Tue, 10 Oct 2017 02:46:36 +0000 (04:46 +0200)]
media: atmel-isc: Add spin lock for clock enable ops
Add the spin lock for the clock enable and disable operations.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Stanimir Varbanov [Mon, 9 Oct 2017 12:24:57 +0000 (14:24 +0200)]
media: venus: fix wrong size on dma_free
This change will fix an issue with dma_free size found with
DMA API debug enabled.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v4.13 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Sakari Ailus [Fri, 29 Sep 2017 10:23:56 +0000 (12:23 +0200)]
media: smiapp: Rely on runtime PM
Instead of relying on a mix of runtime PM and the s_power() callback, drop
the s_power() callback altogether and use runtime PM solely.
As device access is required during device power-on and power-off
sequences, runtime PM alone cannot tell whether the device is available.
Thus the "active" field is introduced in struct smiapp_sensor to tell
whether it is safe to write to the device.
Consequently there is no need to power on the device whenever a file
handle is open. This functionality is removed as well. The user may still
control the device power management through sysfs. Autosuspend remains
enabled, with 1 s delay.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Sakari Ailus [Fri, 29 Sep 2017 09:54:10 +0000 (11:54 +0200)]
media: smiapp: Use __v4l2_ctrl_handler_setup()
Use unlocked __v4l2_ctrl_handler_setup() in order to make the
control setup atomic.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Wed, 18 Oct 2017 00:22:20 +0000 (17:22 -0700)]
Merge commit '
3728e6a255b5' into patchwork
* commit '
3728e6a255b5': (904 commits)
Linux 4.14-rc5
x86/microcode: Do the family check first
locking/lockdep: Disable cross-release features for now
x86/mm: Flush more aggressively in lazy TLB mode
mm, swap: use page-cluster as max window of VMA based swap readahead
mm: page_vma_mapped: ensure pmd is loaded with READ_ONCE outside of lock
kmemleak: clear stale pointers from task stacks
fs/binfmt_misc.c: node could be NULL when evicting inode
fs/mpage.c: fix mpage_writepage() for pages with buffers
linux/kernel.h: add/correct kernel-doc notation
tty: fall back to N_NULL if switching to N_TTY fails during hangup
Revert "vmalloc: back off when the current task is killed"
mm/cma.c: take __GFP_NOWARN into account in cma_alloc()
scripts/kallsyms.c: ignore symbol type 'n'
userfaultfd: selftest: exercise -EEXIST only in background transfer
mm: only display online cpus of the numa node
mm: remove unnecessary WARN_ONCE in page_vma_mapped_walk().
mm/mempolicy: fix NUMA_INTERLEAVE_HIT counter
include/linux/of.h: provide of_n_{addr,size}_cells wrappers for !CONFIG_OF
mm/madvise.c: add description for MADV_WIPEONFORK and MADV_KEEPONFORK
...
Linus Torvalds [Tue, 17 Oct 2017 10:23:09 +0000 (06:23 -0400)]
Merge tag 'media/v4.14-2' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Core fixes:
- cec: Respond to unregistered initiators, when applicable
- dvb_frontend: only use kref after initialized
Driver-specific fixes:
- qcom, camss: Make function vfe_set_selection static
- qcom: VIDEO_QCOM_CAMSS should depend on HAS_DMA
- s5p-cec: add NACK detection support
- media: staging/imx: Fix uninitialized variable warning
- dib3000mc: i2c transfers over usb cannot be done from stack
- venus: init registered list on streamoff"
* tag 'media/v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: dvb_frontend: only use kref after initialized
media: platform: VIDEO_QCOM_CAMSS should depend on HAS_DMA
media: cec: Respond to unregistered initiators, when applicable
media: s5p-cec: add NACK detection support
media: staging/imx: Fix uninitialized variable warning
media: qcom: camss: Make function vfe_set_selection static
media: venus: init registered list on streamoff
media: dvb: i2c transfers over usb cannot be done from stack
Sakari Ailus [Mon, 18 Sep 2017 08:20:59 +0000 (01:20 -0700)]
media: dt: bindings: media: Document data lane numbering without lane reordering
Most devices do not support lane reordering and in many cases the
documentation of the data-lanes property is incomplete for such devices.
Document that in case the lane reordering isn't supported, monotonically
incremented values from 0 or 1 shall be used.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Sakari Ailus [Mon, 18 Sep 2017 08:15:53 +0000 (01:15 -0700)]
media: dt: bindings: media: Document practices for DT bindings, ports, endpoints
Port and endpoint numbering has been omitted in DT binding documentation
for a large number of devices. Also common properties the device uses have
been missed in binding documentation. Make it explicit that these things
need to be documented.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Markus Elfring [Fri, 8 Sep 2017 20:37:00 +0000 (13:37 -0700)]
media: s5p-mfc: Adjust a null pointer check in four functions
The script “checkpatch.pl” pointed information out like the following.
Comparison to NULL could be written...
Thus fix the affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Markus Elfring [Fri, 8 Sep 2017 20:30:09 +0000 (13:30 -0700)]
media: s5p-mfc: Improve a size determination in s5p_mfc_alloc_memdev()
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Markus Elfring [Fri, 8 Sep 2017 20:25:17 +0000 (13:25 -0700)]
media: s5p-mfc: Delete an error message for a failed memory allocation
Omit an extra message for a memory allocation failure in s5p_mfc_probe()
function. This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hoegeun Kwon [Wed, 13 Sep 2017 11:41:55 +0000 (04:41 -0700)]
media: exynos-gsc: Add hardware rotation limits
The hardware rotation limits of gsc depends on SOC (Exynos
5250/5420/5433). Distinguish them and add them to the driver data.
[s.nawrocki@samsung.com: corrected num_entities in 5420 variant data]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hoegeun Kwon [Wed, 13 Sep 2017 11:41:52 +0000 (04:41 -0700)]
media: exynos-gsc: Add compatible for Exynos 5250 and 5420 SoC version
Exynos 5250 and 5420 have different hardware rotation limits.
Since we have to distinguish between these two, we add different
compatible: samsung,exynos5250-gsc and samsung,exynos5420-gsc.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Jacob Chen [Thu, 12 Oct 2017 03:33:09 +0000 (20:33 -0700)]
[media] MAINTAINERS: add entry for Rockchip RGA driver
Add MAINTAINERS entry for the rockchip RGA driver.
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
[hans.verkuil@cisco.com: added commit message]
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Mon, 16 Oct 2017 23:26:04 +0000 (16:26 -0700)]
media: rga: make some functions static
drivers/media/platform/rockchip/rga/rga-hw.c:383:6: warning: no previous prototype for 'rga_cmd_set' [-Wmissing-prototypes]
void rga_cmd_set(struct rga_ctx *ctx)
^~~~~~~~~~~
drivers/media/platform/rockchip/rga/rga.c:359:17: warning: no previous prototype for 'rga_fmt_find' [-Wmissing-prototypes]
struct rga_fmt *rga_fmt_find(struct v4l2_format *f)
^~~~~~~~~~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Jacob Chen [Wed, 11 Oct 2017 07:29:35 +0000 (00:29 -0700)]
[media] rockchip/rga: v4l2 m2m support
Rockchip RGA is a separate 2D raster graphic acceleration unit. It
accelerates 2D graphics operations, such as point/line drawing, image
scaling, rotation, BitBLT, alpha blending and image blur/sharpness
The driver supports various operations from the rendering pipeline.
- copy
- fast solid color fill
- rotation
- flip
- alpha blending
The code in rga-hw.c is used to configure regs according to operations
The code in rga-buf.c is used to create private mmu table for RGA.
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
projects / platform / kernel / linux-rpi.git / log