drm/amd/display: Update bounding box for DCN3.1

[Why & How]
We're missing a default value for dram_channel_width_bytes in the
DCN3.1 SOC bounding box and we don't currently have the interface in
place to query the actual value from VBIOS.

Put in a hardcoded default until we have the interface in place.

Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Query VCO frequency from register for DCN3.1

[Why]
Hardcoding the VCO frequency isn't correct since we don't own or control
the value.

In the case where the hardcode is also missing we can't lightup display.

[How]
Query from the CLK register instead. Update the DFS frequency to be able
to compute the VCO frequency.

Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Populate socclk entries for dcn3.02/3.03

[Why]
Initialize socclk entries in bandwidth params for dcn302, dcn303.

[How]
Fetch the sockclk values from smu for the DPM levels and for the DPM
levels where smu returns 0, previous level values are reported.

Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix max vstartup calculation for modes with borders

[Why]
Vertical and horizontal borders in timings are treated as increasing the
active area - vblank and hblank actually shrink.

Our input into DML does not include these borders so it incorrectly
assumes it has more time than available for vstartup and tmdl
calculations for some modes with borders.

An example of such a timing would be 640x480@72Hz:

h_total: 832
h_border_left: 8
h_addressable: 640
h_border_right: 8
h_front_porch: 16
h_sync_width: 40
v_total: 520
v_border_top: 8
v_addressable: 480
v_border_bottom: 8
v_front_porch: 1
v_sync_width: 3
pix_clk_100hz: 315000

[How]
Include borders as part of destination vactive/hactive.

This change DCN20+ so it has wide impact, but the destination vactive
and hactive are only really used for vstartup calculation anyway.

Most modes do not have vertical or horizontal borders.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable eDP ILR on DCN2.1

[WHY]
Enable feature for 21.40

Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.144

Reviewed-by: Shahin Khayyer <Shahin.Khayyer@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix comparison error in dcn21 DML

[why]
A comparison error made it possible to not iterate through all the
specified prefetch modes.

[how]
Correct "<" to "<="

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Yongqiang Sun <Yongqiang.Sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fixed hardware power down bypass during headless boot

[Why]
During headless boot, DIG may be on which causes HW/SW discrepancies.
To avoid this we power down hardware on boot if DIG is turned on. With
introduction of multiple eDP, hardware power down is being bypassed
under certain conditions.

[How]
Fixed hardware power down bypass, and ensured hardware will power down
if DIG is on and seamless boot is not enabled.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add copyright notice to new files

Reviewed-by: Shahin Khayyer <Shahin.Khayyer@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce delay when sink device not able to ACK 00340h write

[Why]
Theoretically, per DP 1.4a spec, sink device needs to AUX_ACK 00340h
write. However, due to hardware limitation, some sink devices have no
00340h dpcd address at all. This results in sink side fails to reply
ACK, and consequently cause source side keep retrying DPCD write on DPCD
00340h. This results in significant delay when DPCD 00340h write is
triggered (e.g. at S3 resume).

[How]
Check whether sink device could ACK on DPCD 00340h write on boot. If
sink device fails to ACK, then remember that, so we won't write to DPCD
00340h later on.

There will be a drm.debug KMS level message to inform user once a 00340h
DPCD write is skipped on purpose.

Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add debug print for DCC validation failure

[Why&How]
Print a debug message when dcc validation fails in the display driver.
Most DCC enablement related errors are from userspace. Adding a debug
print in case of a failure from display driver will aid quicker triage.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.143

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.73

- Add reserved bits for future feature development
- Fix issue with mismatch with type const

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove compbuf size wait

This tends to take miliseconds in certain scenarios and we'd rather not
wait that long. Due to how this interacts with det size update and
locking waiting should not be necessary as compbuf updates before
unlock.

Add a watch for config error instead as that is something we actually do
care about.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Extend dmub_cmd_psr_copy_settings_data struct

Reserve padding bytes for new feature implementation

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: implement workaround for riommu related hang

[Why]
During S4/S5/reboot, sometimes riommu invalidation request arrive too
early, DCN may be unable to respond to the invalidation request
resulting in pstate hang.

[How]
VBIOS will force allow pstate for riommu invalidation and driver will
clear it after powering down display pipes.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: log additional register state for debug

[Why & How]
Extend existing state collection functions to add some additional
registers useful for debug, and add state collection function for DC
hubbub

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Prevent Diags from entering S2

[why]
Lowering clocks when entering S2 Idle state causes DMUB to hang with
Diags.

[how]
Do not enter S2 optimization with Diags on dcn301 to prevent DMUB hang.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix timer_per_pixel unit error

[why]
The units of the time_per_pixel variable were incorrect, this had to be
changed for the code to properly function.

[how]
The change was very straightforward, only required one line of code to
be changed where the calculation was done.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Oliver Logush <oliver.logush@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Assume active upper layer owns the HW cursor

[why]
The current logic checks if there's an upper pipe whose viewport
completely covers the current pipe viewport.
This fails in pipe splitting case as you can have layer 1 pipe that
crosses the two layer 0 pipes where it's contained in both, but neither
covers it completely, hence we allow the cursor on both layers.

[How]
Instead of trying to "sum up" rectangles from the higher level pipes
which could leave gaps and would not work generically, we will assume if
there's an upper layer that is active, it will control the HW cursor.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: reset dpcd_cap.dpcd_rev for passive dongle.

[why]
currently dc has never reset this dpcd_cap.dpcd_rev.

[how]
ideally  we should reset this before redo detection.
change the passive dongle only for now to reduce the impact.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix 10bit 4K display on CIK GPUs

Commit 72a7cf0aec0c ("drm/amd/display: Keep linebuffer pixel depth at
30bpp for DCE-11.0.") doesn't seems to have fixed 10bit 4K rendering over
DisplayPort for CIK GPUs. On my machine with a HAWAII GPU I get a broken
image that looks like it has an effective resolution of 1920x1080 but
scaled up in an irregular way. Reverting the commit or applying this
patch fixes the problem on v5.14-rc1.

Fixes: 72a7cf0aec0c ("drm/amd/display: Keep linebuffer pixel depth at 30bpp for DCE-11.0.")
Acked-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/ttm: optimize vram access in amdgpu_ttm_access_memory()

1. using vram aper to access vram if possible
2. avoid MM_INDEX/MM_DATA is not working when mmio protect feature is
enabled.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/ttm: replace duplicate code with exiting function

using exiting function to replace duplicate code blocks in
amdgpu_ttm_vram_write().

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: split amdgpu_device_access_vram() into two small parts

split amdgpu_device_access_vram()
1. amdgpu_device_mm_access(): using MM_INDEX/MM_DATA to access vram
2. amdgpu_device_aper_access(): using vram aperature to access vram (option)

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: make a const array common_rates static, makes object smaller

Don't populate the const array common_rates on the stack but instead it
static. Makes the object code smaller by 80 bytes:

Before:
   text    data     bss     dec     hex filename
 268019   98322     256  366597   59805 ../display/amdgpu_dm/amdgpu_dm.o

After:
   text    data     bss     dec     hex filename
 267843   98418     256  366517   597b5 ../display/amdgpu_dm/amdgpu_dm.o

Reduction of 80 bytes

(gcc version 10.3.0)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update DRIVER_IF_VERSION for beige_goby

Update the version to 0xD for beige_goby.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update gc golden setting for dimgrey_cavefish

Update gc_10_3_4 golden setting.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update golden setting for sienna_cichlid

Update GFX golden setting for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update the golden setting for vangogh

This patch is to update the golden setting for vangogh.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: avoid printing ERROR for unknown CEA parse(v2)

For the unknown CEA parse case on DMUB-enabled ASICs, dmesg will
print an error message like below, this will be captured by
automation tools as it has the word like ERROR during boot up
and treated as a false error, as it does not break bootup process.
So use DRM_WARN printing for this.

[drm:amdgpu_dm_update_freesync_caps [amdgpu]] *ERROR* Unknown EDID CEA parser results

v2: Use DRM_WARN to print such info.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Switch to LFB for USBC PD FW in psp v13

Add USBC PD FW implementation here to be used with relevant ASICs.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Switch to VRAM buffer for USBC PD FW.

System memory-based implementation for updating the
USBCPD is deprecated for so switching
to LFB based implementation for all the ASICs.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/nv.c - Optimize code for video codec support structure

Optimized the code for codec info structure initialization

Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/nv.c - Added video codec support for Yellow Carp

Added the supported codecs in the video capabilities query.

Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add another Renoir DID

Add new PCI device id.

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Resolve bug in UMC 6.7 error offset calculation

Use correct channel and instance values

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Add waiting for response of mode-reset message for yellow carp

Remove mdelay process and use smu_cmn_send_smc_msg_with_param to send
mode-reset message to SMC.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdkfd: Add heavy-weight TLB flush after unmapping"

This reverts commit 1098d658bef05e5fee634aab0b6a1fa590cfca24.

Reason for revert: it causes regressions on several Asics.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update"

This reverts commit 075e8080c1a7571563171a07fa9ce47c4bc80044.

Reason for revert: the related commit is reverted.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdkfd: Make TLB flush conditional on mapping"

This reverts commit 31f33243788dcbae8bd2819ed83923a73f7dfd30.

Reason for revert: it causes regressions on several Asics.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: Fix warning of Function parameter or member not described"

This reverts commit 7a68d188d1c4a9d947369acaa19040a58baaaeda.

Reason for revert: the related commit is reverted.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdkfd: Add memory sync before TLB flush on unmap"

This reverts commit 3be4dca197010d1328df8b11febc8c40491be498.

Reason for revert: it causes regressions on several Asics.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdkfd: Only apply TLB flush optimization on ALdebaran"

This reverts commit 51627f03804173a64d23828bc9e4d8474451814f.

Reason for revert: it causes regression on Aldebaran.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Fix BACO state setting for Beige_Goby

Correct BACO state setting for Beige_Goby

Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Restore msix after FLR

After FLR, the msix will be cleared, so need to re-enable it.

Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Allow CPU access for all VRAM BOs

The thunk needs to mmap all BOs for CPU access to allow the debugger to
access them. Invisible ones are mapped with PROT_NONE.

Fixes: 71df0368e9b6 ("drm/amdgpu: Implement mmap as GEM object function")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display - only update eDP's backlight level when necessary

[Why]
The original logic is to update eDP's backlight level
on every amdgpu dm atomic commit, which causes excessive
DMUB write. As a result, when playing game or moving window
around, DMUB timeout and system lagging are observed.

[How]
We only need to update eDP's backlight level when current level
doesn't match requested level.

Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: initialize umc ras function

support umc ras function initialization for aldebaran

v2: squash in compile fix

Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: handle fault counters on invalid address

prange is NULL if vm fault retry on invalid address, for this case, can
not use prange to get pdd, use adev to get gpuidx and then get pdd
instead, then increase pdd vm fault counter.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Correct the irq numbers for virtual crtc

The irq number should be decided by num_crtc, and the num_crtc could change
by parameter.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update header file name

Update the register header file name.

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop smu_v13_0_1.c|h files for yellow carp

Since there's nothing special in smu implementation for yellow carp,
it's better to reuse the common smu_v13_0 interfaces and drop the
specific smu_v13_0_1.c|h files.

v2: remove the duplicate register offset and shift mask header files as
well.

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: bump DRIVER_IF_VERSION for Sienna Cichlid

To suppress the annoying warning about version mismatch.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update the gpu metrics data retrieving for Sienna Cichlid

Due to the structure layout change: "uint32_t ThrottlerStatus" -> "
uint8_t  ThrottlingPercentage[THROTTLER_COUNT]".

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: new SmuMetrics data structure for Sienna Cichlid

Due to the structure layout change: "uint32_t ThrottlerStatus" -> "
uint8_t  ThrottlingPercentage[THROTTLER_COUNT]".

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: return -EFAULT if copy_to_user() fails

If copy_to_user() fails then this should return -EFAULT instead of
-EINVAL.

Fixes: c65b0805e77919 ("drm/amdgpu: RAS EEPROM table is now in debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: unlock on error in amdgpu_ras_debugfs_table_read()

This error path needs to unlock before returning.  While we're at it,
the correct error code from copy_to_user() failure is -EFAULT, not
-EINVAL.

Fixes: c65b0805e77919 ("drm/amdgpu: RAS EEPROM table is now in debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix signedness bug in __amdgpu_eeprom_xfer()

The i2c_transfer() function returns negatives or else the number of
messages transferred.  This code does not work because ARRAY_SIZE()
is type size_t and so that means negative values of "r" are type
promoted to high positive values which are greater than the ARRAY_SIZE().

Fix this by changing the < to != which works regardless of type
promotion.

Fixes: 746b584762e452 ("drm/amdgpu: Fixes to the AMDGPU EEPROM driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix a signedness bug in __verify_ras_table_checksum()

If amdgpu_eeprom_read() returns a negative error code then the error
handling checks:

if (res < buf_size) {

The problem is that "buf_size" is a u32 so negative values are type
promoted to a high positive values and the condition is false.  Fix
this by changing the type of "buf_size" to int.

Fixes: 63d4c081a556a1 ("drm/amdgpu: Optimize EEPROM RAS table I/O")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: increase max EDID size to 2k

[Why]
EDID CTS requires at least 2k (16 blocks) to be readable.

[How]
Increase EDID buffer size to 2k

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Round KHz up when calculating clock requests

[Why]
When requesting clocks from SMU which takes MHz inputs, DC will round
down KHz when converting to MHz, thus potentially requesting too low a
clock value.

[How]
Round up (ceil) when converting KHz to MHz for clock requests to SMU.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.142

DC version 3.2.142 brings improvements in multiple areas. In summary, we
highlight:

- Freesync improvements
- Remove unnecessary assert
- Firmware release 0.0.72
- Improve the EDID manipulation and DML calculations

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.72

- Updated SCR definition for FW boot options for Separate DCN init
  for DMUB FW loaded in VBL

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adjust types and formatting for future development

Type adjustments and formatting fixes.

Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove faulty assert

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Always write repeater mode regardless of LTTPR"

This reverts commit 2b7605d73b97e2fa28e0817242e66ca968d2a7cb

Some displays are not lighting up when put in LTTPR Transparent Mode

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix updating infoframe for DCN3.1 eDP

[Why]
We're only treating TMDS as a valid target for infoframe updates which
results in PSR being unable to transition from state 4 to state 5.

[How]
Also allow infoframe updates for DCN3.1 - following how we handle
this path for earlier ASIC as well.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Freesync HDMI support to DM with DMUB

[Why]
Changes in DM needed to support Freesync HDMI on DMUB.

[How]
Change implementation to parse CEA blocks in case of DMUB-enabled ASICs.

Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add null checks

Added NULL checks before two problematic statements

Signed-off-by: Wang <anguwang@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DMUB Outbound Interrupt Process-X86

[Why]
dmub would notify x86 response time violation by GPINT_DATAOUT

[How]
1. Use GPINT_DATAOUT to trigger x86 interrupt
2. Register GPINT_DATAOUT interrupt handler.
3. Trigger ACR while GPINT_DATAOUT occurred.

Signed-off-by: Chun-Liang Chang <Chun-Liang.Chang@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: isolate link training setting override to its own function

There is a difference between our default behavior and override
behavior. For default behavior we need to decide link training settings
within specs' limitation and mandates.
For override behavior we do not need to follow all these requirements.
We are isolating override decision to its own function to maintain the
integrity of our specs compliant default behavior.

Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Return error if no RAS

In amdgpu_ras_query_error_count() return an error
if the device doesn't support RAS. This prevents
that function from having to always set the values
of the integer pointers (if set), and thus
prevents function side effects--always to have to
set values of integers if integer pointers set,
regardless of whether RAS is supported or
not--with this change this side effect is
mitigated.

Also, if no pointers are set, don't count, since
we've no way of reporting the counts.

Also, give this function a kernel-doc.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Reported-by: Tom Rix <trix@redhat.com>
Fixes: a46751fbcde505 ("drm/amdgpu: Fix RAS function interface")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: SRIOV flr_work should take write_lock

[Why]
If flr_work takes read_lock, then other threads who takes
read_lock can access hardware when host is doing vf flr.

[How]
flr_work should take write_lock to avoid this case.

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: The I2C IP doesn't support 0 writes/reads

The I2C IP doesn't support writes or reads of 0 bytes.

In order for a START/STOP transaction to take
place on the bus, the data written/read has to be
at least one byte.

That is, you cannot generate a write with 0 bytes,
just to get the ACK from a device, just so you can
probe that device if it is on the bus and so to
discover all devices on the bus--you'll have to
read at least one byte. Writes of 0 bytes generate
no START/STOP on this I2C IP--the bus is not
engaged at all.

Set the I2C_AQ_NO_ZERO_LEN to the existing I2C
quirk tables for Aldebaran, Arcturus, Navi10 and
Sienna Cichlid, and add a quirk table to the I2C
driver which drives the bus when the SMU
doesn't--for instance on Vega20.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Add I2C quirk table to Aldebaran

Add I2C quirk table to Aldebaran.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Read clock counter via MMIO to reduce delay (v5)

[Why]
GPU timing counters are read via KIQ under sriov, which will introduce
a delay.

[How]
It could be directly read by MMIO.

v2: Add additional check to prevent carryover issue.
v3: Only check for carryover for once to prevent performance issue.
v4: Add comments of the rough frequency where carryover happens.
v5: Remove mutex and gfxoff ctrl unused with current timing registers.

Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Acked-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.co>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Only apply TLB flush optimization on ALdebaran

It is based on reverting two patches back.
  drm/amdkfd: Make TLB flush conditional on mapping
  drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: separate out vm pasid assignment

Use new helper function amdgpu_vm_set_pasid() to
assign vm pasid value. This also ensures that we don't free
a pasid from vm code as pasids are allocated somewhere else.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use xarray for storing pasid in vm

Replace idr with xarray as we actually need hash functionality.
Cleanup code related to vm pasid by adding helper function.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Avoid printing of stack contents on firmware load error

In case when psp_init_asd_microcode() fails to load ASD microcode file,
psp_v12_0_init_microcode() tries to print the firmware filename that
failed to load before bailing out.

This is wrong because:

- the firmware filename it would want it print is an incorrect one as
  psp_init_asd_microcode() and psp_v12_0_init_microcode() are loading
  different filenames
- it tries to print fw_name, but that's not yet been initialized by that
  time, so it prints random stack contents, e.g.

    amdgpu 0000:04:00.0: Direct firmware load for amdgpu/renoir_asd.bin failed with error -2
    amdgpu 0000:04:00.0: amdgpu: fail to initialize asd microcode
    amdgpu 0000:04:00.0: amdgpu: psp v12.0: Failed to load firmware "\xfeTO\x8e\xff\xff"

Fix that by bailing out immediately, instead of priting the bogus error
message.

Reported-by: Vojtech Pavlik <vojtech@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix resource leak on probe error path

This reverts commit 4192f7b5768912ceda82be2f83c87ea7181f9980.

It is not true (as stated in the reverted commit changelog) that we never
unmap the BAR on failure; it actually does happen properly on
amdgpu_driver_load_kms() -> amdgpu_driver_unload_kms() ->
amdgpu_device_fini() error path.

What's worse, this commit actually completely breaks resource freeing on
probe failure (like e.g. failure to load microcode), as
amdgpu_driver_unload_kms() notices adev->rmmio being NULL and bails too
early, leaving all the resources that'd normally be freed in
amdgpu_acpi_fini() and amdgpu_device_fini() still hanging around, leading
to all sorts of oopses when someone tries to, for example, access the
sysfs and procfs resources which are still around while the driver is
gone.

Fixes: 4192f7b57689 ("drm/amdgpu: unmap register bar on device init failure")
Reported-by: Vojtech Pavlik <vojtech@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: show explicit name instead of id in psp_cmd_submit_buf

Use amdgpu_ucode_name to show ucode name and psp_gfx_cmd_name to
show psp_gfx_cmd name in psp_cmd_submit_buf.

v2: adjust function name

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add function to show psp_gfx_cmd name via id

Implement function psp_gfx_cmd_name to show cmd name
via cmd id.

v2: rename it to psp_gfx_cmd_name

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add function to show ucode name via id

Implement function amdgpu_ucode_name to show ucode name
via ucode id.

v2: rename it to amdgpu_ucode_name

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add license to umc_8_7_0_sh_mask.h

Was missing. Add it.

Fixes: 6b36fa6143f6ca ("drm/amdgpu: add umc v8_7_0 IP headers")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rectify line endings in umc v8_7_0 IP headers

Commit 6b36fa6143f6 ("drm/amdgpu: add umc v8_7_0 IP headers") adds the new
file ./drivers/gpu/drm/amd/include/asic_reg/umc/umc_8_7_0_sh_mask.h with
DOS line endings, which is very uncommon for the kernel repository.

Rectify the line endings in this file with dos2unix.

Identified by a checkpatch evaluation on the whole kernel repository and
spot-checking for really unexpected checkpatch rule violations.

Reported-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Simplify managed I2C transfer of Aldebaran

Simplify Aldebaran managed I2C transfer function
to correctly play with the upper I2C layers.

This gets it in line with Navi10, Acturus, and
Sienna Cichlid.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Correctly disable the I2C IP block

On long transfers to the EEPROM device,
i.e. write, it is observed that the driver aborts
the transfer.

The reason for this is that the driver isn't
patient enough--the IC_STATUS register's contents
is 0x27, which is MST_ACTIVITY | TFE | TFNF |
ACTIVITY. That is, while the transmission FIFO is
empty, we, the I2C master device, are still
driving the bus.

Implement the correct procedure to disable
the block, as described in the DesignWare I2C
Databook, section 3.8.3 Disabling DW_apb_i2c on
page 56. Now there are no premature aborts on long
data transfers.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use a single loop

In smu_v11_0_i2c_transmit() use a single loop to
transmit bytes, instead of two nested loops.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix koops when accessing RAS EEPROM

Debugfs RAS EEPROM files are available when
the ASIC supports RAS, and when the debugfs is
enabled, an also when "ras_enable" module
parameter is set to 0. However in this case,
we get a kernel oops when accessing some of
the "ras_..." controls in debugfs. The reason
for this is that struct amdgpu_ras::adev is
unset. This commit sets it, thus enabling access
to those facilities. Note that this facilitates
EEPROM access and not necessarily RAS features or
functionality.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix 64 bit divide in eeprom code

pos is 64 bits.

Fixes: c65b0805e77919 ("drm/amdgpu: RAS EEPROM table is now in debugfs")
Cc: luben.tuikov@amd.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: RAS EEPROM table is now in debugfs

Add "ras_eeprom_size" file in debugfs, which
reports the maximum size allocated to the RAS
table in EEROM, as the number of bytes and the
number of records it could store. For instance,

$cat /sys/kernel/debug/dri/0/ras/ras_eeprom_size
262144 bytes or 10921 records
$_

Add "ras_eeprom_table" file in debugfs, which
dumps the RAS table stored EEPROM, in a formatted
way. For instance,

$cat ras_eeprom_table
 Signature    Version  FirstOffs       Size   Checksum
0x414D4452 0x00010000 0x00000014 0x000000EC 0x000000DA
Index  Offset ErrType Bank/CU          TimeStamp      Offs/Addr MemChl MCUMCID    RetiredPage
    0 0x00014      ue    0x00 0x00000000607608DC 0x000000000000   0x00    0x00 0x000000000000
    1 0x0002C      ue    0x00 0x00000000607608DC 0x000000001000   0x00    0x00 0x000000000001
    2 0x00044      ue    0x00 0x00000000607608DC 0x000000002000   0x00    0x00 0x000000000002
    3 0x0005C      ue    0x00 0x00000000607608DC 0x000000003000   0x00    0x00 0x000000000003
    4 0x00074      ue    0x00 0x00000000607608DC 0x000000004000   0x00    0x00 0x000000000004
    5 0x0008C      ue    0x00 0x00000000607608DC 0x000000005000   0x00    0x00 0x000000000005
    6 0x000A4      ue    0x00 0x00000000607608DC 0x000000006000   0x00    0x00 0x000000000006
    7 0x000BC      ue    0x00 0x00000000607608DC 0x000000007000   0x00    0x00 0x000000000007
    8 0x000D4      ue    0x00 0x00000000607608DD 0x000000008000   0x00    0x00 0x000000000008
$_

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Xinhui Pan <xinhui.pan@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Optimize EEPROM RAS table I/O

Split functionality between read and write, which
simplifies the code and exposes areas of
optimization and more or less complexity, and take
advantage of that.

Read and write the table in one go; use a separate
stage to decode or encode the data, as opposed to
on the fly, which keeps the I2C bus busy. Use a
single read/write to read/write the table or at
most two if the number of records we're
reading/writing wraps around.

Check the check-sum of a table in EEPROM on init.

Update the checksum at the same time as when
updating the table header signature, when the
threshold was increased on boot.

Take advantage of arithmetic modulo 256, that is,
use a byte!, to greatly simplify checksum
arithmetic.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Get rid of test function

The code is now tested from userspace.
Remove already macroed out test function.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Some renames

Qualify with "ras_". Use kernel's own--don't
redefine your own.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Nerf buff

buff --> buf. Essentially buffer abbreviates to
buf, remove 1/2 of it, or just the iron part, as
opposed to just the Er,

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use explicit cardinality for clarity

RAS_MAX_RECORD_NUM may mean the maximum record
number, as in the maximum house number on your
street, or it may mean the maximum number of
records, as in the count of records, which is also
a number. To make this distinction whether the
number is ordinal (index) or cardinal (count),
rename this macro to RAS_MAX_RECORD_COUNT.

This makes it easy to understand what it refers
to, especially when we compute quantities such as,
how many records do we have left in the table,
especially when there are so many other numbers,
quantities and numerical macros around.

Also rename the long,
amdgpu_ras_eeprom_get_record_max_length() to the
more succinct and clear,
amdgpu_ras_eeprom_max_record_count().

When computing the threshold, which also deals
with counts, i.e. "how many", use cardinal
"max_eeprom_records_count", than the quantitative
"max_eeprom_records_len".

Simplify the logic here and there, as well.

Cc: Guchun Chen <guchun.chen@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Simplify RAS EEPROM checksum calculations

Rename update_table_header() to
write_table_header() as this function is actually
writing it to EEPROM.

Use kernel types; use u8 to carry around the
checksum, in order to take advantage of arithmetic
modulo 8-bits (256).

Tidy up to 80 columns.

When updating the checksum, just recalculate the
whole thing.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix amdgpu_ras_eeprom_init()

No need to account for the 2 bytes of EEPROM
address--this is now well abstracted away by
the fixes the the lower layers.

Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>