RDMA/rxe: Add rxe_srq_cleanup()

Move cleanup code from rxe_destroy_srq() to rxe_srq_cleanup() which is
called after all references are dropped to allow code depending on the srq
object to complete.

Link: https://lore.kernel.org/r/20220421014042.26985-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Remove IB_SRQ_INIT_MASK

Currently the #define IB_SRQ_INIT_MASK is used to distinguish the
rxe_create_srq verb from the rxe_modify_srq verb so that some code can be
shared between these two subroutines.

This commit splits rxe_srq_chk_attr into two subroutines: rxe_srq_chk_init
and rxe_srq_chk_attr which handle the create_srq and modify_srq verbs
separately.

Link: https://lore.kernel.org/r/20220421014042.26985-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Skip adjusting remote addr for write in retry operation

For write request the remote addr will be sent only with first packet so
we don't have to adjust wqe->iova in retry operation.

Link: https://lore.kernel.org/r/20220502053907.6388-1-cgxu519@mykernel.net
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Optimize the mr pool struct

Based on the commit c9f4c695835c ("RDMA/rxe: Reverse the sense of
RXE_POOL_NO_ALLOC"), only the mr pool uses the RXE_POOL_ALLOC, As such,
replace this flags with pool type to save memory.

Link: https://lore.kernel.org/r/20220428041028.1363139-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/hns: Remove the num_cqc_timer variable

The bt number of cqc_timer of HIP09 increases compared with that of HIP08.
Therefore, cqc_timer_bt_num and num_cqc_timer do not match. As a result,
the driver may fail to allocate cqc_timer. So the driver needs to uniquely
uses cqc_timer_bt_num to represent the bt number of cqc_timer.

Fixes: 0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/20220429093545.58070-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/hns: Add the detection for CMDQ status in the device initialization process

CMDQ may fail during HNS ROCEE initialization. The following is the log
when the execution fails:

  hns3 0000:bd:00.2: In reset process RoCE client reinit.
  hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
  hns3 0000:bd:00.2 hns_2: failed to set gid, ret = -11!
  hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
  <...>
  hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
  hns3 0000:bd:00.2: CMDQ move tail from 840 to 0
  hns3 0000:bd:00.2: [cmd]token 14e mailbox 20 timeout.
  hns3 0000:bd:00.2 hns_2: set HEM step 0 failed!
  hns3 0000:bd:00.2 hns_2: set HEM address to HW failed!
  hns3 0000:bd:00.2 hns_2: failed to alloc mtpt, ret = -16.
  infiniband hns_2: Couldn't create ib_mad PD
  infiniband hns_2: Couldn't open port 1
  hns3 0000:bd:00.2: Reset done, RoCE client reinit finished.

However, even if ib_mad client registration failed, ib_register_device()
still returns success to the driver.

In the device initialization process, CMDQ execution fails because HW/FW
is abnormal. Therefore, if CMDQ fails, the initialization function should
set CMDQ to a fatal error state and return a failure to the caller.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20220429093104.26687-1-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/hns: Remove unnecessary ret variable from hns_roce_dereg_mr()

Fix the following coccicheck warning:

drivers/infiniband/hw/hns/hns_roce_mr.c:343:5-8: Unneeded variable: "ret".

Return 0 directly instead.

Link: https://lore.kernel.org/r/20220426070858.9098-1-guozhengkui@vivo.com
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Replace paylen by payload

In finish_packet() in rxe_req.c a variable was incorrectly called paylen
instead of payload. Elsewhere in the rxe source payload is always used for
the RoCE payload length and paylen is always used for the UDP payload
length. This will cause unnecessary confusion.

Replace paylen by payload in finish_packet().

Link: https://lore.kernel.org/r/20220420172316.5465-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/core: Avoid flush_workqueue(system_unbound_wq) usage

Flushing system-wide workqueues is dangerous and will be forbidden.
Replace system_unbound_wq with local ib_unreg_wq.

Link: https://lore.kernel.org/r/252cefb0-a400-83f6-2032-333d69f52c1b@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Remove useless parameters for update_state()

wqe was not used by update_state() so far.

Commit aaaf62e06623 ("RDMA/rxe: Remove useless argument for
update_state()") just did a partial fixes.

Link: https://lore.kernel.org/r/20220412022903.574238-1-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Clean UMR QP type flow from mlx5_ib_post_send()

No internal UMR operation is using mlx5_ib_post_send(), remove the UMR QP
type logic from this function.

Link: https://lore.kernel.org/r/0b2f368f14bc9266ebdf92a601ca4e1e5b1e1188.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Use mlx5_umr_post_send_wait() to update xlt

Move mlx5_ib_update_mr_pas logic to umr.c, and use
mlx5_umr_post_send_wait() instead of mlx5_ib_post_send_wait().

Since it is the last use of mlx5_ib_post_send_wait(), remove it.

Link: https://lore.kernel.org/r/55a4972f156aba3592a2fc9bcb33e2059acf295f.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Use mlx5_umr_post_send_wait() to update MR pas

Move mlx5_ib_update_mr_pas logic to umr.c, and use
mlx5_umr_post_send_wait() instead of mlx5_ib_post_send_wait().

Link: https://lore.kernel.org/r/ed8f2ee6c64804072155d727149abf7105f92536.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Move creation and free of translation tables to umr.c

The only use of the translation tables is to update the mkey translation
by a UMR operation. Move the responsibility of creating and freeing them
to umr.c

Link: https://lore.kernel.org/r/1d93f1381be82a22aaf1168cdbdfb227eac1ce62.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Use mlx5_umr_post_send_wait() to rereg pd access

Move rereg_pd_access logic to umr.c, and use mlx5_umr_post_send_wait()
instead of mlx5_ib_post_send_wait().

Link: https://lore.kernel.org/r/18da4f47edbc2561f652b7ee4e7a5269e866af77.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Use mlx5_umr_post_send_wait() to revoke MRs

Move the revoke_mr logic to umr.c, and using mlx5_umr_post_send_wait()
instead of mlx5_ib_post_send_wait().

In the new implementation, do not zero out the access flags. Before
reusing the MR, we will update it to the required access.

Link: https://lore.kernel.org/r/63717dfdaf6007f81b3e6dbf598f5bf3875ce86f.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Introduce mlx5_umr_post_send_wait()

Introduce mlx5_umr_post_send_wait() that uses a UMR adjusted flow for
posting WQEs. The next patches will gradually move UMR operations to use
this flow. Once done, will get rid of mlx5_ib_post_send_wait().

mlx5_umr_post_send_wait gets already written WQE segments and will only
memcpy it to the SQ. This way, we avoid packing all the data in a WR just
to unpack it into the WQE.

Link: https://lore.kernel.org/r/f027dd592fde62402b2d49efded8d1d22229d22b.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Expose wqe posting helpers outside of wr.c

Split posting WQEs logic to helpers, generalize it and expose for future
use in the UMR post send.

Link: https://lore.kernel.org/r/a2b0f6cd96f0405a65d38e82c6ae7ef34dcb34bc.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Simplify get_umr_update_access_mask()

Instead of getting the update access capabilities each call to
get_umr_update_access_mask(), pass struct mlx5_ib_dev and get the
capabilities inside the function.

Link: https://lore.kernel.org/r/f22b8a84ef32e29ada26691f06b57e2ed5943b76.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Move mkey ctrl segment logic to umr.c

Move set_reg_umr_segment() and its helpers to umr.c.

Link: https://lore.kernel.org/r/5a7fac8ae8543521d19d174663245ae84b910310.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Move umr checks to umr.h

Move mlx5_ib_can_load_pas_with_umr() and mlx5_ib_can_reconfig_with_umr()
to umr.h and rename them accordingly.

Link: https://lore.kernel.org/r/1b799b0142534a63dfd5bacc5f8ad2256d7777ad.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Move init and cleanup of UMR to umr.c

The first patch in a series to split UMR logic to a dedicated file.  As a
start, move the init and cleanup of UMR resources to umr.c.

Link: https://lore.kernel.org/r/849e632dd1945a2534712a320cc5779f2149ba96.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/mlx5: Fix flow steering egress flow

The commit mentioned in Fixes line removed the function that was
called to check validity of esp_aes_gcm attribute. Sadly, that
is_valid_esp_aes_gcm() returned success even for specs without
esp_aes_gcm at all.

So the right fix will be to remove whole if () and such fix
the following error observed in smatch too.

   drivers/infiniband/hw/mlx5/fs.c:1126 _create_flow_rule()
   warn: duplicate check 'is_egress' (previous on line 1098)

Fixes: de8bdb476908 ("RDMA/mlx5: Drop crypto flow steering API")
Link: https://lore.kernel.org/r/11b31c1f85bc8c8add385529aa3f307c3b383a11.1649842371.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Generate a completion for unsupported/invalid opcode

Current rxe_requester() doesn't generate a completion when processing an
unsupported/invalid opcode. If rxe driver doesn't support a new opcode
(e.g. RDMA Atomic Write) and RDMA library supports it, an application
using the new opcode can reproduce this issue. Fix the issue by calling
"goto err;".

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220410113513.27537-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Merge branch 'mlx5-next' of https://git./linux/kernel/git/mellanox/linux

Leon Romanovsky says:

====================
Mellanox shared branch that includes:

 * Removal of FPGA TLS code https://lore.kernel.org/all/cover.1649073691.git.leonro@nvidia.com

  Mellanox INNOVA TLS cards are EOL in May, 2018 [1]. As such, the code
  is unmaintained, untested and not in-use by any upstream/distro oriented
  customers. In order to reduce code complexity, drop the kernel code,
  clean build config options and delete useless kTLS vs. TLS separation.

  [1] https://network.nvidia.com/related-docs/eol/LCR-000286.pdf

 * Removal of FPGA IPsec code https://lore.kernel.org/all/cover.1649232994.git.leonro@nvidia.com

  Together with FPGA TLS, the IPsec went to EOL state in the November of
  2019 [1]. Exactly like FPGA TLS, no active customers exist for this
  upstream code and all the complexity around that area can be deleted.

  [2] https://network.nvidia.com/related-docs/eol/LCR-000535.pdf

 * Fix to undefined behavior from Borislav https://lore.kernel.org/all/20220405151517.29753-11-bp@alien8.de
====================

* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
  net/mlx5: Remove not-implemented IPsec capabilities
  net/mlx5: Remove ipsec_ops function table
  net/mlx5: Reduce kconfig complexity while building crypto support
  net/mlx5: Move IPsec file to relevant directory
  net/mlx5: Remove not-needed IPsec config
  net/mlx5: Align flow steering allocation namespace to common style
  net/mlx5: Unify device IPsec capabilities check
  net/mlx5: Remove useless IPsec device checks
  net/mlx5: Remove ipsec vs. ipsec offload file separation
  RDMA/core: Delete IPsec flow action logic from the core
  RDMA/mlx5: Drop crypto flow steering API
  RDMA/mlx5: Delete never supported IPsec flow action
  net/mlx5: Remove FPGA ipsec specific statistics
  net/mlx5: Remove XFRM no_trailer flag
  net/mlx5: Remove not-used IDA field from IPsec struct
  net/mlx5: Delete metadata handling logic
  net/mlx5_fpga: Drop INNOVA IPsec support
  IB/mlx5: Fix undefined behavior due to shift overflowing the constant
  net/mlx5: Cleanup kTLS function names and their exposure
  net/mlx5: Remove tls vs. ktls separation as it is the same
  net/mlx5: Remove indirection in TLS build
  net/mlx5: Reliably return TLS device capabilities
  net/mlx5_fpga: Drop INNOVA TLS support

Link: https://lore.kernel.org/r/20220409055303.1223644-1-leon@kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/hns: Init the variable at the suitable place

Assigning a value to ret in the init statement of a for-loop makes the
code less readable.

Link: https://lore.kernel.org/r/20220409083254.9696-6-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/hns: Add judgment on the execution result of CMDQ that free vf resource

CDMQ may fail to execute, so its return value should not be ignored.

Link: https://lore.kernel.org/r/20220409083254.9696-5-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/hns: Remove redundant variable "ret"

It is completely redundant for this function to use "ret" to store the
return value of the subfunction.

Link: https://lore.kernel.org/r/20220409083254.9696-4-liangwenpeng@huawei.com
Signed-off-by: Guofeng Yue <yueguofeng@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/hns: Remove unused function to_hns_roce_state()

This function is only used in HIP06, which has been removed. So remove it.

Link: https://lore.kernel.org/r/20220409083254.9696-3-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/hns: Remove unnecessary check for the sgid_attr when modifying QP

The sgid_attr cannot be null in this scenario. This judgment is redundant.

Fixes: 606bf89e98ef ("RDMA/hns: Refactor for hns_roce_v2_modify_qp function")
Link: https://lore.kernel.org/r/20220409083254.9696-2-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

net/mlx5: Remove not-implemented IPsec capabilities

Clean a capabilities enum to remove not-implemented bits.

Link: https://lore.kernel.org/r/1044bb7b779107ff38e48e3f6553421104f3f819.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Remove ipsec_ops function table

There is only one IPsec implementation and ipsec_ops is not needed
at all in this situation. Together with removal of ipsec_ops, we can
drop the entry checks as these functions are called for IPsec devices
only.

Link: https://lore.kernel.org/r/bc8dd1c8a77b65dbf5e2cf92c813ffaca2505c5f.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Reduce kconfig complexity while building crypto support

Both IPsec and kTLS need two functions declared in the lib/crypto.c
file. These functions are advertised through general mlx5.h file and
don't have any protection from attempts to call them without proper
config option.

Instead of creating stubs just for two functions, simply build that *.c
file as part of regular mlx5_eth build and rely on compiler to throw
them away if no callers exist in produced code.

Link: https://lore.kernel.org/r/37f02171da06886c1b403d44dd18b2a56b19219d.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Move IPsec file to relevant directory

IPsec is part of ethernet side of mlx5 driver and needs to be placed
in en_accel folder.

Link: https://lore.kernel.org/r/a0ca88f4d9c602c574106c0de0511803e7dcbdff.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Remove not-needed IPsec config

In current code, the CONFIG_MLX5_IPSEC and CONFIG_MLX5_EN_IPSEC are
the same. So remove useless indirection.

Link: https://lore.kernel.org/r/fd14492cbc01a0d51a5bfedde02bcd2154123fde.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Align flow steering allocation namespace to common style

Flow steering is a low level internal driver API, as such it relies on
the callers to check if namespace is supported and not rely on some
compilation flag.

Link: https://lore.kernel.org/r/cfb411a8a9ed2a1471810af254bdc0f03469f79c.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Unify device IPsec capabilities check

Merge two different function to one in order to provide coherent
picture if the device is IPsec capable or not.

Link: https://lore.kernel.org/r/8f10ea06ad19c6f651e9fb33921009658f01e1d5.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Remove useless IPsec device checks

The mlx5_is_ipsec_device() check was to distinguish ConnectX device
related ops from FPGA, so post removing FPGA IPsec code this check
can be removed as no other device implements it.

It is safe to do it as there is already embedded check of IPsec device
in mlx5_accel_ipsec_device_caps().

Link: https://lore.kernel.org/r/e45362abfcabe18e8af20ec8d1acdc99355978f3.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Remove ipsec vs. ipsec offload file separation

The IPsec won't be initialized at all if device doesn't support IPsec
offload. It means that we can combine the ipsec.c and ipsec_offload.c
files to one file. Such change will allow us to remove ipsec_ops
indirection.

Link: https://lore.kernel.org/r/d0ac1fb7b14c10ae20a21ae17a393ee860c72ac3.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

RDMA/core: Delete IPsec flow action logic from the core

The removal of mlx5 flow steering logic, left the kernel without any RDMA
drivers that implements flow action callbacks supplied by RDMA/core. Any
user access to them caused to EOPNOTSUPP error, which can be achieved by
simply removing ioctl implementation.

Link: https://lore.kernel.org/r/a638e376314a2eb1c66f597c0bbeeab2e5de7faf.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

RDMA/mlx5: Drop crypto flow steering API

The mlx5 flow steering crypto API was intended to be used in FPGA
devices, which is not supported for years already. The removal of
mlx5 crypto FPGA code together with inability to configure encryption
keys makes the low steering API completely unusable.

So delete the code, so any ESP flow steering requests will fail with
not supported error, as it is happening now anyway as no device support
this type of API.

Link: https://lore.kernel.org/r/634a5face7734381463d809bfb89850f6998deac.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

RDMA/mlx5: Delete never supported IPsec flow action

The IPSEC_REQUIRED_METADATA capability bit is never set, and can be
safely removed from the flow action flags.

Link: https://lore.kernel.org/r/697cd60bd5c9b6a004c449c1a41c2798fac844ff.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Remove FPGA ipsec specific statistics

Delete the statistics that is not used anymore.

Link: https://lore.kernel.org/r/3f194752881e095910c887dd5cede1dcba6acaf3.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Remove XFRM no_trailer flag

Only FPGA needed this NO_TRAILER flag, so remove this assignment.

Link: https://lore.kernel.org/r/636d75421e1ca4254a062537eea001ab0e50e19b.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Remove not-used IDA field from IPsec struct

The IDA halloc variable is not needed and can be removed.

Link: https://lore.kernel.org/r/cbecfbe01621e1b8bde746aa7f6c08497e656a25.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Delete metadata handling logic

Remove specific to FPGS IPsec metadata handling logic which is not
required for mlx5 NICs devices.

Link: https://lore.kernel.org/r/fe67a1de4fc6032a940e18c8a6461a1ccf902fc4.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5_fpga: Drop INNOVA IPsec support

Mellanox INNOVA IPsec cards are EOL in Nov, 2019 [1]. As such, the code
is unmaintained, untested and not in-use by any upstream/distro oriented
customers. In order to reduce code complexity, drop the kernel code.

[1] https://network.nvidia.com/related-docs/eol/LCR-000535.pdf

Link: https://lore.kernel.org/r/2afe88ec5020a491079eacf6fe3c89b64d65195c.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

RDMA/rxe: Remove reliable datagram support

The rdma_rxe driver does not actually support the reliable datagram
transport but contains two references to RD opcodes in driver code.  This
commit removes these references to RD transport opcodes which are never
used.

Link: https://lore.kernel.org/r/cce0f07d-25fc-5880-69e7-001d951750b7@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Remove support for SMI QPs from rdma_rxe

Currently the rdma_rxe driver supports SMI type QPs in a few places which
is incorrect. RoCE devices never should support SMI QPs.  This commit
removes SMI QP support from the driver.

Link: https://lore.kernel.org/r/20220407185416.16372-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Remove mc_grp_pool from struct rxe_dev

Remove struct rxe_dev mc_grp_pool field. This field is no longer used.

Link: https://lore.kernel.org/r/20220407184849.14359-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/rxe: Remove type 2A memory window capability

Currently the rdma_rxe driver claims to support both 2A and 2B type memory
windows. But the IBA requires

010-37.2.31: If an HCA supports the Base Memory Management
extensions, the HCA shall support either Type 2A or Type 2B MWs,
but not both.

This commit removes the device capability bit for type 2A memory windows
and adds a clarifying comment to rxe_mw.c.

Link: https://lore.kernel.org/r/20220407184321.14207-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/usnic: Refactor usnic_uiom_alloc_pd()

Rather than hard-coding pci_bus_type, pass the PF device through to
usnic_uiom_alloc_pd() and retrieve its bus there. This prepares for
iommu_domain_alloc() changing to take a device rather than a bus_type.

Link: https://lore.kernel.org/r/ef607cb3f5a09920b86971b8c8e60af8c647457e.1649169359.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/usnic: Stop using iommu_present()

Even if an IOMMU might be present for some PCI segment in the system,
that doesn't necessarily mean it provides translation for the device(s)
we care about. Replace iommu_present() with a more appropriate check at
probe time, and garbage-collect the resulting empty init function.

Link: https://lore.kernel.org/r/f707b4248e1d33b6d2c7f1d7c94febb802cf9890.1649161199.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

IB/SA: Replace usage of found with dedicated list iterator variable

To move the list iterator variable into the list_for_each_entry_*() macro
in the future it should be avoided to use the list iterator variable after
the loop body.

To *never* use the list iterator variable after the loop it was concluded
to use a separate iterator variable instead of a found boolean.

This removes the need to use a found variable and simply checking if the
variable was set, can determine if the break/goto was hit.

Link: https://lore.kernel.org/r/20220331091634.644840-1-jakobkoschel@gmail.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA: Split kernel-only global device caps from uverbs device caps

Split out flags from ib_device::device_cap_flags that are only used
internally to the kernel into kernel_cap_flags that is not part of the
uapi. This limits the device_cap_flags to being the same bitmap that will
be copied to userspace.

This cleanly splits out the uverbs flags from the kernel flags to avoid
confusion in the flags bitmap.

Add some short comments describing which each of the kernel flags is
connected to. Remove unused kernel flags.

Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

IB/mlx5: Fix undefined behavior due to shift overflowing the constant

Fix:

  drivers/infiniband/hw/mlx5/main.c: In function ‘translate_eth_legacy_proto_oper’:
  drivers/infiniband/hw/mlx5/main.c:370:2: error: case label does not reduce to an integer constant
    case MLX5E_PROT_MASK(MLX5E_50GBASE_KR2):
    ^~~~

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.

Link: https://lore.kernel.org/all/20220405151517.29753-11-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: linux-rdma@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Cleanup kTLS function names and their exposure

The _accel_ part of the function is not relevant anymore, so rename kTLS
functions to be without it, together with header cleanup to do not have
declarations that are not used.

Link: https://lore.kernel.org/r/72319e6020fb2553d02b3bbc7476bda363f6d60c.1649073691.git.leonro@nvidia.com
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Remove tls vs. ktls separation as it is the same

After removal FPGA TLS, we can remove tls->ktls indirection too,
as it is the same thing.

Link: https://lore.kernel.org/r/67e596599edcffb0de43f26551208dfd34ac777e.1649073691.git.leonro@nvidia.com
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Remove indirection in TLS build

The dream described in the commit 1ae173228489 ("net/mlx5: Accel, Add TLS
tx offload interface") never came true, even an opposite happened when FPGA
TLS support was dropped. Such removal revealed the problematic flow in the
build process: build of unrelated files in case of TLS or IPsec are enabled.

In both cases, the MLX5_ACCEL is enabled, which built both TLS and IPsec.
As a solution, simply merge MLX5_TLS and MLX5_EN_TLS options and move TLS
related files to the eth part of the mlx5_core.

Link: https://lore.kernel.org/r/0d1ea8cdc3a15922640b8b764d2bdb8f587b52c2.1649073691.git.leonro@nvidia.com
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5: Reliably return TLS device capabilities

The capabilities returned from the FW are independent to the compiled
kernel and traditionally rely on the relevant CAPs bit only.

The mlx5_accel_is_ktls_*() functions are compiled out if CONFIG_MLX5_TLS
is not set, which "hides" from the user the information that TLS can be
enabled on this device.

Link: https://lore.kernel.org/r/a333ce541fb9497d04126b11c4a0052f9807d141.1649073691.git.leonro@nvidia.com
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

net/mlx5_fpga: Drop INNOVA TLS support

Mellanox INNOVA TLS cards are EOL in May, 2018 [1]. As such, the code
is unmaintained, untested and not in-use by any upstream/distro oriented
customers. In order to reduce code complexity, drop the kernel code.

[1] https://network.nvidia.com/related-docs/eol/LCR-000286.pdf

Link: https://lore.kernel.org/r/b88add368def721ea9d054cb69def72d9e3f67aa.1649073691.git.leonro@nvidia.com
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

IB/rdmavt: add missing locks in rvt_ruc_loopback

The documentation of the function rvt_error_qp says both r_lock and
s_lock need to be held when calling that function.
It also asserts using lockdep that both of those locks are held.
rvt_error_qp is called form rvt_send_cq, which is called from
rvt_qp_complete_swqe, which is called from rvt_send_complete, which is
called from rvt_ruc_loopback in two places. Both of these places do not
hold r_lock. Fix this by acquiring a spin_lock of r_lock in both of
these places.
The r_lock acquiring cannot be added in rvt_qp_complete_swqe because
some of its other callers already have r_lock acquired.

Link: https://lore.kernel.org/r/20220228195144.71946-1-dossche.niels@gmail.com
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

IB/uverbs: Move part of enum ib_device_cap_flags to uapi

1) Part of enum ib_device_cap_flags are used by ibv_query_device(3)
   or ibv_query_device_ex(3), so we define them in
   include/uapi/rdma/ib_user_verbs.h and only expose them to userspace.

2) Reformat enum ib_device_cap_flags by removing the indent before '='.

Link: https://lore.kernel.org/r/20220331032419.313904-2-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

IB/uverbs: Move enum ib_raw_packet_caps to uapi

This enum is used by ibv_query_device_ex(3) so it should be defined
in include/uapi/rdma/ib_user_verbs.h.

Link: https://lore.kernel.org/r/20220331032419.313904-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

RDMA/irdma: Remove the redundant variable

In the function irdma_puda_get_next_send_wqe, the variable wqe
is not necessary. So remove it.

Link: https://lore.kernel.org/r/20220323230135.291813-1-yanjun.zhu@intel.com
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Linux 5.18-rc1

Merge tag 'trace-v5.18-2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull more tracing updates from Steven Rostedt:

 - Rename the staging files to give them some meaning. Just
   stage1,stag2,etc, does not show what they are for

 - Check for NULL from allocation in bootconfig

 - Hold event mutex for dyn_event call in user events

 - Mark user events to broken (to work on the API)

 - Remove eBPF updates from user events

 - Remove user events from uapi header to keep it from being installed.

 - Move ftrace_graph_is_dead() into inline as it is called from hot
   paths and also convert it into a static branch.

* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Move user_events.h temporarily out of include/uapi
  ftrace: Make ftrace_graph_is_dead() a static branch
  tracing: Set user_events to BROKEN
  tracing/user_events: Remove eBPF interfaces
  tracing/user_events: Hold event_mutex during dyn_event_add
  proc: bootconfig: Add null pointer check
  tracing: Rename the staging files for trace_events

Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fix from Stephen Boyd:
 "A single revert to fix a boot regression seen when clk_put() started
  dropping rate range requests. It's best to keep various systems
  booting so we'll kick this out and try again next time"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  Revert "clk: Drop the rate range on clk_put()"

Merge tag 'x86-urgent-2022-04-03' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes and updates:

   - Make the prctl() for enabling dynamic XSTATE components correct so
     it adds the newly requested feature to the permission bitmap
     instead of overwriting it. Add a selftest which validates that.

   - Unroll string MMIO for encrypted SEV guests as the hypervisor
     cannot emulate it.

   - Handle supervisor states correctly in the FPU/XSTATE code so it
     takes the feature set of the fpstate buffer into account. The
     feature sets can differ between host and guest buffers. Guest
     buffers do not contain supervisor states. So far this was not an
     issue, but with enabling PASID it needs to be handled in the buffer
     offset calculation and in the permission bitmaps.

   - Avoid a gazillion of repeated CPUID invocations in by caching the
     values early in the FPU/XSTATE code.

   - Enable CONFIG_WERROR in x86 defconfig.

   - Make the X86 defconfigs more useful by adapting them to Y2022
     reality"

* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu/xstate: Consolidate size calculations
  x86/fpu/xstate: Handle supervisor states in XSTATE permissions
  x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
  x86/fpu: Cache xfeature flags from CPUID
  x86/fpu/xsave: Initialize offset/size cache early
  x86/fpu: Remove unused supervisor only offsets
  x86/fpu: Remove redundant XCOMP_BV initialization
  x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
  x86/config: Make the x86 defconfigs a bit more usable
  x86/defconfig: Enable WERROR
  selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
  x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation

Merge tag 'core-urgent-2022-04-03' of git://git./linux/kernel/git/tip/tip

Pull RT signal fix from Thomas Gleixner:
 "Revert the RT related signal changes. They need to be reworked and
  generalized"

* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"

Merge tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping

Pull more dma-mapping updates from Christoph Hellwig:

 - fix a regression in dma remap handling vs AMD memory encryption (me)

 - finally kill off the legacy PCI DMA API (Christophe JAILLET)

* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: move pgprot_decrypted out of dma_pgprot
  PCI/doc: cleanup references to the legacy PCI DMA API
  PCI: Remove the deprecated "pci-dma-compat.h" API

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

 - avoid unnecessary rebuilds for library objects

 - fix return value of __setup handlers

 - fix invalid input check for "crashkernel=" kernel option

 - silence KASAN warnings in unwind_frame

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()
  ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0'
  ARM: 9187/1: JIVE: fix return value of __setup handler
  ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects

Revert "clk: Drop the rate range on clk_put()"

This reverts commit 7dabfa2bc4803eed83d6f22bd6f045495f40636b. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com
Cc: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org

Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git./linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Avoid SEGV if core.cpus isn't set in 'perf stat'.

 - Stop depending on .git files for building PERF-VERSION-FILE, used in
   'perf --version', fixing some perf tools build scenarios.

 - Convert tracepoint.py example to python3.

 - Update UAPI header copies from the kernel sources: socket,
   mman-common, msr-index, KVM, i915 and cpufeatures.

 - Update copy of libbpf's hashmap.c.

 - Directly return instead of using local ret variable in
   evlist__create_syswide_maps(), found by coccinelle.

* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf python: Convert tracepoint.py example to python3
  perf evlist: Directly return instead of using local ret variable
  perf cpumap: More cpu map reuse by merge.
  perf cpumap: Add is_subset function
  perf evlist: Rename cpus to user_requested_cpus
  perf tools: Stop depending on .git files for building PERF-VERSION-FILE
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools kvm headers arm64: Update KVM headers from the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
  perf beauty: Update copy of linux/socket.h with the kernel sources
  perf tools: Update copy of libbpf's hashmap.c
  perf stat: Avoid SEGV if core.cpus isn't set

Merge tag 'kbuild-fixes-v5.18' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix empty $(PYTHON) expansion.

 - Fix UML, which got broken by the attempt to suppress Clang warnings.

 - Fix warning message in modpost.

* tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: restore the warning message for missing symbol versions
  Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS"
  kbuild: Remove '-mno-global-merge'
  kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh
  kconfig: remove stale comment about removed kconfig_print_symbol()

Merge tag 'mips_5.18_1' of git://git./linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

 - build fix for gpio

 - fix crc32 build problems

 - check for failed memory allocations

* tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: crypto: Fix CRC32 code
  MIPS: rb532: move GPIOD definition into C-files
  MIPS: lantiq: check the return value of kzalloc()
  mips: sgi-ip22: add a check for the return of kzalloc()

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:

 - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr

 - Documentation improvements

 - Prevent module exit until all VMs are freed

 - PMU Virtualization fixes

 - Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences

 - Other miscellaneous bugfixes

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
  KVM: x86: fix sending PV IPI
  KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
  KVM: x86: Remove redundant vm_entry_controls_clearbit() call
  KVM: x86: cleanup enter_rmode()
  KVM: x86: SVM: fix tsc scaling when the host doesn't support it
  kvm: x86: SVM: remove unused defines
  KVM: x86: SVM: move tsc ratio definitions to svm.h
  KVM: x86: SVM: fix avic spec based definitions again
  KVM: MIPS: remove reference to trap&emulate virtualization
  KVM: x86: document limitations of MSR filtering
  KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
  KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
  KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
  KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
  KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
  KVM: x86: Trace all APICv inhibit changes and capture overall status
  KVM: x86: Add wrappers for setting/clearing APICv inhibits
  KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
  KVM: X86: Handle implicit supervisor access with SMAP
  KVM: X86: Rename variable smap to not_smap in permission_fault()
  ...

modpost: restore the warning message for missing symbol versions

This log message was accidentally chopped off.

I was wondering why this happened, but checking the ML log, Mark
precisely followed my suggestion [1].

I just used "..." because I was too lazy to type the sentence fully.
Sorry for the confusion.

[1]: https://lore.kernel.org/all/CAK7LNAR6bXXk9-ZzZYpTqzFqdYbQsZHmiWspu27rtsFxvfRuVA@mail.gmail.com/

Fixes: 4a6795933a89 ("kbuild: modpost: Explicitly warn about unprototyped symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

Merge tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block

Pull block driver fix from Jens Axboe:
 "Got two reports on nbd spewing warnings on load now, which is a
  regression from a commit that went into your tree yesterday.

  Revert the problematic change for now"

* tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block:
  Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"

Merge tag 'pci-v5.18-changes-2' of git://git./linux/kernel/git/helgaas/pci

Pull pci fix from Bjorn Helgaas:

 - Fix Hyper-V "defined but not used" build issue added during merge
   window (YueHaibing)

* tag 'pci-v5.18-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: hv: Remove unused hv_set_msi_entry_from_desc()

Merge tag 'tag-chrome-platform-for-v5.18' of git://git./linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
 "cros_ec_typec:

   - Check for EC device - Fix a crash when using the cros_ec_typec
     driver on older hardware not capable of typec commands

   - Make try power role optional

   - Mux configuration reorganization series from Prashant

  cros_ec_debugfs:

   - Fix use after free. Thanks Tzung-bi

  sensorhub:

   - cros_ec_sensorhub fixup - Split trace include file

  misc:

   - Add new mailing list for chrome-platform development:

chrome-platform@lists.linux.dev

     Now with patchwork!"

* tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_debugfs: detach log reader wq from devm
  platform: chrome: Split trace include file
  platform/chrome: cros_ec_typec: Update mux flags during partner removal
  platform/chrome: cros_ec_typec: Configure muxes at start of port update
  platform/chrome: cros_ec_typec: Get mux state inside configure_mux
  platform/chrome: cros_ec_typec: Move mux flag checks
  platform/chrome: cros_ec_typec: Check for EC device
  platform/chrome: cros_ec_typec: Make try power role optional
  MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list

Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"

This reverts commit 6d35d04a9e18990040e87d2bbf72689252669d54.

Both Gabriel and Borislav report that this commit casues a regression
with nbd:

sysfs: cannot create duplicate filename '/dev/block/43:0'

Revert it before 5.18-rc1 and we'll investigage this separately in
due time.

Link: https://lore.kernel.org/all/YkiJTnFOt9bTv6A2@zn.tnic/
Reported-by: Gabriel L. Somlo <somlo@cmu.edu>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

watch_queue: Free the page array when watch_queue is dismantled

Commit 7ea1a0124b6d ("watch_queue: Free the alloc bitmap when the
watch_queue is torn down") took care of the bitmap, but not the page
array.

  BUG: memory leak
  unreferenced object 0xffff88810d9bc140 (size 32):
  comm "syz-executor335", pid 3603, jiffies 4294946994 (age 12.840s)
  hex dump (first 32 bytes):
    40 a7 40 04 00 ea ff ff 00 00 00 00 00 00 00 00  @.@.............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
     kmalloc_array include/linux/slab.h:621 [inline]
     kcalloc include/linux/slab.h:652 [inline]
     watch_queue_set_size+0x12f/0x2e0 kernel/watch_queue.c:251
     pipe_ioctl+0x82/0x140 fs/pipe.c:632
     vfs_ioctl fs/ioctl.c:51 [inline]
     __do_sys_ioctl fs/ioctl.c:874 [inline]
     __se_sys_ioctl fs/ioctl.c:860 [inline]
     __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860
     do_syscall_x64 arch/x86/entry/common.c:50 [inline]

Reported-by: syzbot+25ea042ae28f3888727a@syzkaller.appspotmail.com
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20220322004654.618274-1-eric.dumazet@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tracing: mark user_events as BROKEN

After being merged, user_events become more visible to a wider audience
that have concerns with the current API.

It is too late to fix this for this release, but instead of a full
revert, just mark it as BROKEN (which prevents it from being selected in
make config).  Then we can work finding a better API.  If that fails,
then it will need to be completely reverted.

To not have the code silently bitrot, still allow building it with
COMPILE_TEST.

And to prevent the uapi header from being installed, then later changed,
and then have an old distro user space see the old version, move the
header file out of the uapi directory.

Surround the include with CONFIG_COMPILE_TEST to the current location,
but when the BROKEN tag is taken off, it will use the uapi directory,
and fail to compile.  This is a good way to remind us to move the header
back.

Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home
Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tracing: Move user_events.h temporarily out of include/uapi

While user_events API is under development and has been marked for broken
to not let the API become fixed, move the header file out of the uapi
directory. This is to prevent it from being installed, then later changed,
and then have an old distro user space update with a new kernel, where
applications see the user_events being available, but the old header is in
place, and then they get compiled incorrectly.

Also, surround the include with CONFIG_COMPILE_TEST to the current
location, but when the BROKEN tag is taken off, it will use the uapi
directory, and fail to compile. This is a good way to remind us to move
the header back.

Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home
Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com
Link: https://lkml.kernel.org/r/20220401143903.188384f3@gandalf.local.home
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ftrace: Make ftrace_graph_is_dead() a static branch

ftrace_graph_is_dead() is used on hot paths, it just reads a variable
in memory and is not worth suffering function call constraints.

For instance, at entry of prepare_ftrace_return(), inlining it avoids
saving prepare_ftrace_return() parameters to stack and restoring them
after calling ftrace_graph_is_dead().

While at it using a static branch is even more performant and is
rather well adapted considering that the returned value will almost
never change.

Inline ftrace_graph_is_dead() and replace 'kill_ftrace_graph' bool
by a static branch.

The performance improvement is noticeable.

Link: https://lkml.kernel.org/r/e0411a6a0ed3eafff0ad2bc9cd4b0e202b4617df.1648623570.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Set user_events to BROKEN

After being merged, user_events become more visible to a wider audience
that have concerns with the current API. It is too late to fix this for
this release, but instead of a full revert, just mark it as BROKEN (which
prevents it from being selected in make config). Then we can work finding
a better API. If that fails, then it will need to be completely reverted.

Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/
Link: https://lkml.kernel.org/r/20220330155835.5e1f6669@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing/user_events: Remove eBPF interfaces

Remove eBPF interfaces within user_events to ensure they are fully
reviewed.

Link: https://lore.kernel.org/all/20220329165718.GA10381@kbox/
Link: https://lkml.kernel.org/r/20220329173051.10087-1-beaub@linux.microsoft.com
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing/user_events: Hold event_mutex during dyn_event_add

Make sure the event_mutex is properly held during dyn_event_add call.
This is required when adding dynamic events.

Link: https://lkml.kernel.org/r/20220328223225.1992-1-beaub@linux.microsoft.com
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

proc: bootconfig: Add null pointer check

kzalloc is a memory allocation function which can return NULL when some
internal memory errors happen. It is safer to add null pointer check.

Link: https://lkml.kernel.org/r/20220329104004.2376879-1-lv.ruyi@zte.com.cn
Cc: stable@vger.kernel.org
Fixes: c1a3c36017d4 ("proc: bootconfig: Add /proc/bootconfig to show boot config list")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Rename the staging files for trace_events

When looking for implementation of different phases of the creation of the
TRACE_EVENT() macro, it is pretty useless when all helper macro
redefinitions are in files labeled "stageX_defines.h". Rename them to
state which phase the files are for. For instance, when looking for the
defines that are used to create the event fields, seeing
"stage4_event_fields.h" gives the developer a good idea that the defines
are in that file.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

KVM: x86: fix sending PV IPI

If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask.  In this case __send_ipi_mask
should send the IPI.

This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.

Fixes: aaffcfd1e82 ("KVM: X86: Implement PV IPIs in linux guest")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <1646814944-51801-1-git-send-email-lirongqing@baidu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/mmu: do compare-and-exchange of gPTE via the user address

FNAME(cmpxchg_gpte) is an inefficient mess.  It is at least decent if it
can go through get_user_pages_fast(), but if it cannot then it tries to
use memremap(); that is not just terribly slow, it is also wrong because
it assumes that the VM_PFNMAP VMA is contiguous.

The right way to do it would be to do the same thing as
hva_to_pfn_remapped() does since commit add6a0cd1c5b ("KVM: MMU: try to
fix up page faults before giving up", 2016-07-05), using follow_pte()
and fixup_user_fault() to determine the correct address to use for
memremap().  To do this, one could for example extract hva_to_pfn()
for use outside virt/kvm/kvm_main.c.  But really there is no reason to
do that either, because there is already a perfectly valid address to
do the cmpxchg() on, only it is a userspace address.  That means doing
user_access_begin()/user_access_end() and writing the code in assembly
to handle exceptions correctly.  Worse, the guest PTE can be 8-byte
even on i686 so there is the extra complication of using cmpxchg8b to
account for.  But at least it is an efficient mess.

(Thanks to Linus for suggesting improvement on the inline assembly).

Reported-by: Qiuhao Li <qiuhao@sysec.org>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Reported-by: syzbot+6cde2282daa792c49ab8@syzkaller.appspotmail.com
Debugged-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Fixes: bd53cb35a3e9 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Remove redundant vm_entry_controls_clearbit() call

When emulating exit from long mode, EFER_LMA is cleared with
vmx_set_efer().  This will already unset the VM_ENTRY_IA32E_MODE control
bit as requested by SDM, so there is no need to unset VM_ENTRY_IA32E_MODE
again in exit_lmode() explicitly.  In case EFER isn't supported by
hardware, long mode isn't supported, so exit_lmode() cannot be reached.

Note that, thanks to the shadow controls mechanism, this change doesn't
eliminate vmread or vmwrite.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-3-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: cleanup enter_rmode()

vmx_set_efer() sets uret->data but, in fact if the value of uret->data
will be used vmx_setup_uret_msrs() will have rewritten it with the value
returned by update_transition_efer().  uret->data is consumed if and only
if uret->load_into_hardware is true, and vmx_setup_uret_msrs() takes care
of (a) updating uret->data before setting uret->load_into_hardware to true
(b) setting uret->load_into_hardware to false if uret->data isn't updated.

Opportunistically use "vmx" directly instead of redoing to_vmx().

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-2-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: SVM: fix tsc scaling when the host doesn't support it

It was decided that when TSC scaling is not supported,
the virtual MSR_AMD64_TSC_RATIO should still have the default '1.0'
value.

However in this case kvm_max_tsc_scaling_ratio is not set,
which breaks various assumptions.

Fix this by always calculating kvm_max_tsc_scaling_ratio regardless of
host support.  For consistency, do the same for VMX.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: x86: SVM: remove unused defines

Remove some unused #defines from svm.c

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-7-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: SVM: move tsc ratio definitions to svm.h

Another piece of SVM spec which should be in the header file

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: SVM: fix avic spec based definitions again

Due to wrong rebase, commit
4a204f7895878 ("KVM: SVM: Allow AVIC support on system w/ physical APIC ID > 255")

moved avic spec #defines back to avic.c.

Move them back, and while at it extend AVIC_DOORBELL_PHYSICAL_ID_MASK to 12
bits as well (it will be used in nested avic)

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: MIPS: remove reference to trap&emulate virtualization

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220313140522.1307751-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>