Mario Limonciello [Wed, 7 Jun 2023 06:41:22 +0000 (01:41 -0500)]
drm/amd: Make sure image is written to trigger VBIOS image update flow
commit
3eb1a3a04056ba3df3205e169b8acc9da0c65a94 upstream.
The VBIOS image update flow requires userspace to:
1) Write the image to `psp_vbflash`
2) Read `psp_vbflash`
3) Poll `psp_vbflash_status` to check for completion
If userspace reads `psp_vbflash` before writing an image, it's
possible that it causes problems that can put the dGPU into an invalid
state.
Explicitly check that an image has been written before letting a read
succeed.
Cc: stable@vger.kernel.org
Fixes:
8424f2ccb3c0 ("drm/amdgpu/psp: Add vbflash sysfs interface support")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hersen Wu [Thu, 25 May 2023 12:37:40 +0000 (08:37 -0400)]
drm/amd/display: edp do not add non-edid timings
commit
e749dd10e5f292061ad63d2b030194bf7d7d452c upstream.
[Why] most edp support only timings from edid. applying
non-edid timings, especially those timings out of edp
bandwidth, may damage edp.
[How] do not add non-edid timings for edp.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wes Huang [Thu, 8 Jun 2023 03:01:42 +0000 (11:01 +0800)]
net: usb: qmi_wwan: add support for Compal RXM-G1
commit
863199199713908afaa47ba09332b87621c12496 upstream.
Add support for Compal RXM-G1 which is based on Qualcomm SDX55 chip.
This patch adds support for two compositions:
0x9091: DIAG + MODEM + QMI_RMNET + ADB
0x90db: DIAG + DUN + RMNET + DPL + QDSS(Trace) + ADB
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=05c6 ProdID=9091 Rev= 4.14
S: Manufacturer=QCOM
S: Product=SDXPRAIRIE-MTP _SN:
719AB680
S: SerialNumber=
719ab680
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=05c6 ProdID=90db Rev= 4.14
S: Manufacturer=QCOM
S: Product=SDXPRAIRIE-MTP _SN:
719AB680
S: SerialNumber=
719ab680
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=8f(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Wes Huang <wes.huang@moxa.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20230608030141.3546-1-wes.huang@moxa.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sonny Jiang [Tue, 6 Jun 2023 21:18:52 +0000 (17:18 -0400)]
drm/amdgpu: vcn_4_0 set instance 0 init sched score to 1
commit
9db5ec1ceb5303398ec4f899d691073d531257c3 upstream.
Only vcn0 can process AV1 codecx. In order to use both vcn0 and
vcn1 in h264/265 transcode to AV1 cases, set vcn0 sched score to 1
at initialization time.
Signed-off-by: Sonny Jiang <sonjiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Edward Srouji [Mon, 5 Jun 2023 10:33:24 +0000 (13:33 +0300)]
RDMA/uverbs: Restrict usage of privileged QKEYs
commit
0cadb4db79e1d9eea66711c4031e435c2191907e upstream.
According to the IB specification rel-1.6, section 3.5.3:
"QKEYs with the most significant bit set are considered controlled
QKEYs, and a HCA does not allow a consumer to arbitrarily specify a
controlled QKEY."
Thus, block non-privileged users from setting such a QKEY.
Cc: stable@vger.kernel.org
Fixes:
bc38a6abdd5a ("[PATCH] IB uverbs: core implementation")
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://lore.kernel.org/r/c00c809ddafaaf87d6f6cb827978670989a511b3.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Airlie [Thu, 15 Jun 2023 02:22:11 +0000 (12:22 +1000)]
nouveau: fix client work fence deletion race
commit
c8a5d5ea3ba6a18958f8d76430e4cd68eea33943 upstream.
This seems to have existed for ever but is now more apparant after
commit
9bff18d13473 ("drm/ttm: use per BO cleanup workers")
My analysis: two threads are running, one in the irq signalling the
fence, in dma_fence_signal_timestamp_locked, it has done the
DMA_FENCE_FLAG_SIGNALLED_BIT setting, but hasn't yet reached the
callbacks.
The second thread in nouveau_cli_work_ready, where it sees the fence is
signalled, so then puts the fence, cleanups the object and frees the
work item, which contains the callback.
Thread one goes again and tries to call the callback and causes the
use-after-free.
Proposed fix: lock the fence signalled check in nouveau_cli_work_ready,
so either the callbacks are done or the memory is freed.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Fixes:
11e451e74050 ("drm/nouveau: remove fence wait code from deferred client work handler")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/dri-devel/20230615024008.1600281-1-airlied@gmail.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Marangi [Wed, 14 Jun 2023 09:17:14 +0000 (11:17 +0200)]
net: ethernet: stmicro: stmmac: fix possible memory leak in __stmmac_open
commit
30134b7c47bd28fdb4db4d12aef824e0579cfee4 upstream.
Fix a possible memory leak in __stmmac_open when stmmac_init_phy fails.
It's also needed to free everything allocated by stmmac_setup_dma_desc
and not just the dma_conf struct.
Drop free_dma_desc_resources from __stmmac_open and correctly call
free_dma_desc_resources on each user of __stmmac_open on error.
Reported-by: Jose Abreu <Jose.Abreu@synopsys.com>
Fixes:
ba39b344e924 ("net: ethernet: stmicro: stmmac: generate stmmac dma conf before open")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Link: https://lore.kernel.org/r/20230614091714.15912-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Snitzer [Wed, 14 Jun 2023 00:05:34 +0000 (20:05 -0400)]
dm thin: fix issue_discard to pass GFP_NOIO to __blkdev_issue_discard
commit
722d90822321497e2837cfc9000202e256e6b32f upstream.
issue_discard() passes GFP_NOWAIT to __blkdev_issue_discard() despite
its code assuming bio_alloc() always succeeds.
Commit
3dba53a958a75 ("dm thin: use __blkdev_issue_discard for async
discard support") clearly shows where things went bad:
Before commit
3dba53a958a75, dm-thin.c's open-coded
__blkdev_issue_discard_async() properly handled using GFP_NOWAIT.
Unfortunately __blkdev_issue_discard() doesn't and it was missed
during review.
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Li Lingfeng [Tue, 6 Jun 2023 12:20:24 +0000 (20:20 +0800)]
dm thin metadata: check fail_io before using data_sm
commit
cb65b282c9640c27d3129e2e04b711ce1b352838 upstream.
Must check pmd->fail_io before using pmd->data_sm since
pmd->data_sm may be destroyed by other processes.
P1(kworker) P2(message)
do_worker
process_prepared
process_prepared_discard_passdown_pt2
dm_pool_dec_data_range
pool_message
commit
dm_pool_commit_metadata
↓
// commit failed
metadata_operation_failed
abort_transaction
dm_pool_abort_metadata
__open_or_format_metadata
↓
dm_sm_disk_open
↓
// open failed
// pmd->data_sm is NULL
dm_sm_dec_blocks
↓
// try to access pmd->data_sm --> UAF
As shown above, if dm_pool_commit_metadata() and
dm_pool_abort_metadata() fail in pool_message process, kworker may
trigger UAF.
Fixes:
be500ed721a6 ("dm space maps: improve performance with inc/dec on ranges of blocks")
Cc: stable@vger.kernel.org
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukasz Tyl [Wed, 14 Jun 2023 12:25:24 +0000 (14:25 +0200)]
ALSA: usb-audio: Add quirk flag for HEM devices to enable native DSD playback
commit
122e2cb7e1a30438cc0e8bf70d4279db245d7d5b upstream.
This commit adds new DEVICE_FLG with QUIRK_FLAG_DSD_RAW and Vendor Id for
HEM devices which supports native DSD. Prior to this change Linux kernel
was not enabling native DSD playback for HEM devices, and as a result,
DSD audio was being converted to PCM "on the fly". HEM devices,
when connected to the system, would only play audio in PCM format,
even if the source material was in DSD format. With the addition of new
VENDOR_FLG in the quircks.c file, the devices are now correctly
recognized, and raw DSD data is transmitted to the device,
allowing for native DSD playback.
Signed-off-by: Lukasz Tyl <ltyl@hem-e.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230614122524.30271-1-ltyl@hem-e.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 12 Jun 2023 13:28:18 +0000 (15:28 +0200)]
ALSA: usb-audio: Fix broken resume due to UAC3 power state
commit
8ba61c9f6c9bdfbf9d197b0282641d24ae909778 upstream.
As reported in the bugzilla below, the PM resume of a UAC3 device may
fail due to the incomplete power state change, stuck at D1. The
reason is that the driver expects the full D0 power state change only
at hw_params, while the normal PCM resume procedure doesn't call
hw_params.
For fixing the bug, we add the same power state update to D0 at the
prepare callback, which is certainly called by the resume procedure.
Note that, with this change, the power state change in the hw_params
becomes almost redundant, since snd_usb_hw_params() doesn't touch the
parameters (at least it tires so). But dropping it is still a bit
risky (e.g. we have the media-driver binding), so I leave the D0 power
state change in snd_usb_hw_params() as is for now.
Fixes:
a0a4959eb4e9 ("ALSA: usb-audio: Operate UAC3 Power Domains in PCM callbacks")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217539
Link: https://lore.kernel.org/r/20230612132818.29486-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Mason [Fri, 9 Jun 2023 17:53:41 +0000 (10:53 -0700)]
btrfs: can_nocow_file_extent should pass down args->strict from callers
commit
deccae40e4b30f98837e44225194d80c8baf2233 upstream.
Commit
619104ba453ad0 ("btrfs: move common NOCOW checks against a file
extent into a helper") changed our call to btrfs_cross_ref_exist() to
always pass false for the 'strict' parameter. We're passing this down
through the stack so that we can do a full check for cross references
during swapfile activation.
With strict always false, this test fails:
btrfs subvol create swappy
chattr +C swappy
fallocate -l1G swappy/swapfile
chmod 600 swappy/swapfile
mkswap swappy/swapfile
btrfs subvol snap swappy swapsnap
btrfs subvol del -C swapsnap
btrfs fi sync /
sync;sync;sync
swapon swappy/swapfile
The fix is to just use args->strict, and everyone except swapfile
activation is passing false.
Fixes:
619104ba453ad0 ("btrfs: move common NOCOW checks against a file extent into a helper")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Thu, 8 Jun 2023 09:10:25 +0000 (11:10 +0200)]
btrfs: fix iomap_begin length for nocow writes
commit
7833b865953c8e62abc76a3261c04132b2fb69de upstream.
can_nocow_extent can reduce the len passed in, which needs to be
propagated to btrfs_dio_iomap_begin so that iomap does not submit
more data then is mapped.
This problems exists since the btrfs_get_blocks_direct helper was added
in commit
c5794e51784a ("btrfs: Factor out write portion of
btrfs_get_blocks_direct"), but the ordered_extent splitting added in
commit
b73a6fd1b1ef ("btrfs: split partial dio bios before submit")
added a WARN_ON that made a syzkaller test fail.
Reported-by: syzbot+ee90502d5c8fd1d0dd93@syzkaller.appspotmail.com
Fixes:
c5794e51784a ("btrfs: Factor out write portion of btrfs_get_blocks_direct")
CC: stable@vger.kernel.org # 6.1+
Tested-by: syzbot+ee90502d5c8fd1d0dd93@syzkaller.appspotmail.com
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qu Wenruo [Sun, 11 Jun 2023 00:09:13 +0000 (08:09 +0800)]
btrfs: do not ASSERT() on duplicated global roots
commit
745806fb4554f334e6406fa82b328562aa48f08f upstream.
[BUG]
Syzbot reports a reproducible ASSERT() when using rescue=usebackuproot
mount option on a corrupted fs.
The full report can be found here:
https://syzkaller.appspot.com/bug?extid=
c4614eae20a166c25bf0
BTRFS error (device loop0: state C): failed to load root csum
assertion failed: !tmp, in fs/btrfs/disk-io.c:1103
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3664!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 3608 Comm: syz-executor356 Not tainted 6.0.0-rc7-syzkaller-00029-g3800a713b607 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022
RIP: 0010:assertfail+0x1a/0x1c fs/btrfs/ctree.h:3663
RSP: 0018:
ffffc90003aaf250 EFLAGS:
00010246
RAX:
0000000000000032 RBX:
0000000000000000 RCX:
f21c13f886638400
RDX:
0000000000000000 RSI:
0000000080000000 RDI:
0000000000000000
RBP:
ffff888021c640a0 R08:
ffffffff816bd38d R09:
ffffed10173667f1
R10:
ffffed10173667f1 R11:
1ffff110173667f0 R12:
dffffc0000000000
R13:
ffff8880229c21f7 R14:
ffff888021c64060 R15:
ffff8880226c0000
FS:
0000555556a73300(0000) GS:
ffff8880b9b00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000055a2637d7a00 CR3:
00000000709c4000 CR4:
00000000003506e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
btrfs_global_root_insert+0x1a7/0x1b0 fs/btrfs/disk-io.c:1103
load_global_roots_objectid+0x482/0x8c0 fs/btrfs/disk-io.c:2467
load_global_roots fs/btrfs/disk-io.c:2501 [inline]
btrfs_read_roots fs/btrfs/disk-io.c:2528 [inline]
init_tree_roots+0xccb/0x203c fs/btrfs/disk-io.c:2939
open_ctree+0x1e53/0x33df fs/btrfs/disk-io.c:3574
btrfs_fill_super+0x1c6/0x2d0 fs/btrfs/super.c:1456
btrfs_mount_root+0x885/0x9a0 fs/btrfs/super.c:1824
legacy_get_tree+0xea/0x180 fs/fs_context.c:610
vfs_get_tree+0x88/0x270 fs/super.c:1530
fc_mount fs/namespace.c:1043 [inline]
vfs_kern_mount+0xc9/0x160 fs/namespace.c:1073
btrfs_mount+0x3d3/0xbb0 fs/btrfs/super.c:1884
[CAUSE]
Since the introduction of global roots, we handle
csum/extent/free-space-tree roots as global roots, even if no
extent-tree-v2 feature is enabled.
So for regular csum/extent/fst roots, we load them into
fs_info::global_root_tree rb tree.
And we should not expect any conflicts in that rb tree, thus we have an
ASSERT() inside btrfs_global_root_insert().
But rescue=usebackuproot can break the assumption, as we will try to
load those trees again and again as long as we have bad roots and have
backup roots slot remaining.
So in that case we can have conflicting roots in the rb tree, and
triggering the ASSERT() crash.
[FIX]
We can safely remove that ASSERT(), as the caller will properly put the
offending root.
To make further debugging easier, also add two explicit error messages:
- Error message for conflicting global roots
- Error message when using backup roots slot
Reported-by: syzbot+a694851c6ab28cbcfb9c@syzkaller.appspotmail.com
Fixes:
abed4aaae4f7 ("btrfs: track the csum, extent, and free space trees in a rb tree")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ricardo Ribalda [Fri, 19 May 2023 14:47:38 +0000 (16:47 +0200)]
powerpc/purgatory: remove PGO flags
commit
20188baceb7a1463dc0bcb0c8678b69c2f447df6 upstream.
If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections. This is not supported by kexec and crashes the
system.
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-3-b05c520b7296@chromium.org
Fixes:
930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ricardo Ribalda [Fri, 19 May 2023 14:47:39 +0000 (16:47 +0200)]
riscv/purgatory: remove PGO flags
commit
88ac3bbcf73853880a9b2a65c67e6854390741cc upstream.
If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections. This is not supported by kexec and crashes the
system.
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-4-b05c520b7296@chromium.org
Fixes:
930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ricardo Ribalda [Fri, 19 May 2023 14:47:37 +0000 (16:47 +0200)]
x86/purgatory: remove PGO flags
commit
97b6b9cbba40a21c1d9a344d5c1991f8cfbf136e upstream.
If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections. This is not supported by kexec and crashes the
system.
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-2-b05c520b7296@chromium.org
Fixes:
930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ricardo Ribalda [Fri, 19 May 2023 14:47:36 +0000 (16:47 +0200)]
kexec: support purgatories with .text.hot sections
commit
8652d44f466ad5772e7d1756e9457046189b0dfc upstream.
Patch series "kexec: Fix kexec_file_load for llvm16 with PGO", v7.
When upreving llvm I realised that kexec stopped working on my test
platform.
The reason seems to be that due to PGO there are multiple .text sections
on the purgatory, and kexec does not supports that.
This patch (of 4):
Clang16 links the purgatory text in two sections when PGO is in use:
[ 1] .text PROGBITS
0000000000000000 00000040
00000000000011a1 0000000000000000 AX 0 0 16
[ 2] .rela.text RELA
0000000000000000 00003498
0000000000000648 0000000000000018 I 24 1 8
...
[17] .text.hot. PROGBITS
0000000000000000 00003220
000000000000020b 0000000000000000 AX 0 0 1
[18] .rela.text.hot. RELA
0000000000000000 00004428
0000000000000078 0000000000000018 I 24 17 8
And both of them have their range [sh_addr ... sh_addr+sh_size] on the
area pointed by `e_entry`.
This causes that image->start is calculated twice, once for .text and
another time for .text.hot. The second calculation leaves image->start
in a random location.
Because of this, the system crashes immediately after:
kexec_core: Starting new kernel
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-0-b05c520b7296@chromium.org
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-1-b05c520b7296@chromium.org
Fixes:
930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Mon, 12 Jun 2023 19:51:36 +0000 (13:51 -0600)]
io_uring/net: save msghdr->msg_control for retries
commit
cac9e4418f4cbd548ccb065b3adcafe073f7f7d2 upstream.
If the application sets ->msg_control and we have to later retry this
command, or if it got queued with IOSQE_ASYNC to begin with, then we
need to retain the original msg_control value. This is due to the net
stack overwriting this field with an in-kernel pointer, to copy it
in. Hitting that path for the second time will now fail the copy from
user, as it's attempting to copy from a non-user address.
Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/issues/880
Reported-and-tested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huacai Chen [Thu, 15 Jun 2023 06:35:52 +0000 (14:35 +0800)]
LoongArch: Fix perf event id calculation
commit
962369120d750cbc9c4dc492f32b4304669ff6aa upstream.
LoongArch PMCFG has 10bit event id rather than 8 bit, so fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ryusuke Konishi [Fri, 26 May 2023 02:13:32 +0000 (11:13 +0900)]
nilfs2: reject devices with insufficient block count
commit
92c5d1b860e9581d64baca76779576c0ab0d943d upstream.
The current sanity check for nilfs2 geometry information lacks checks for
the number of segments stored in superblocks, so even for device images
that have been destructively truncated or have an unusually high number of
segments, the mount operation may succeed.
This causes out-of-bounds block I/O on file system block reads or log
writes to the segments, the latter in particular causing
"a_ops->writepages" to repeatedly fail, resulting in sync_inodes_sb() to
hang.
Fix this issue by checking the number of segments stored in the superblock
and avoiding mounting devices that can cause out-of-bounds accesses. To
eliminate the possibility of overflow when calculating the number of
blocks required for the device from the number of segments, this also adds
a helper function to calculate the upper bound on the number of segments
and inserts a check using it.
Link: https://lkml.kernel.org/r/20230526021332.3431-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+7d50f1e54a12ba3aeae2@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=7d50f1e54a12ba3aeae2
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ryusuke Konishi [Wed, 24 May 2023 09:43:48 +0000 (18:43 +0900)]
nilfs2: fix possible out-of-bounds segment allocation in resize ioctl
commit
fee5eaecca86afa544355569b831c1f90f334b85 upstream.
Syzbot reports that in its stress test for resize ioctl, the log writing
function nilfs_segctor_do_construct hits a WARN_ON in
nilfs_segctor_truncate_segments().
It turned out that there is a problem with the current implementation of
the resize ioctl, which changes the writable range on the device (the
range of allocatable segments) at the end of the resize process.
This order is necessary for file system expansion to avoid corrupting the
superblock at trailing edge. However, in the case of a file system
shrink, if log writes occur after truncating out-of-bounds trailing
segments and before the resize is complete, segments may be allocated from
the truncated space.
The userspace resize tool was fine as it limits the range of allocatable
segments before performing the resize, but it can run into this issue if
the resize ioctl is called alone.
Fix this issue by changing nilfs_sufile_resize() to update the range of
allocatable segments immediately after successful truncation of segment
space in case of file system shrink.
Link: https://lkml.kernel.org/r/20230524094348.3784-1-konishi.ryusuke@gmail.com
Fixes:
4e33f9eab07e ("nilfs2: implement resize ioctl")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+33494cd0df2ec2931851@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/
0000000000005434c405fbbafdc5@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ryusuke Konishi [Sat, 13 May 2023 10:24:28 +0000 (19:24 +0900)]
nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key()
commit
2f012f2baca140c488e43d27a374029c1e59098d upstream.
A syzbot fault injection test reported that nilfs_btnode_create_block, a
helper function that allocates a new node block for b-trees, causes a
kernel BUG for disk images where the file system block size is smaller
than the page size.
This was due to unexpected flags on the newly allocated buffer head, and
it turned out to be because the buffer flags were not cleared by
nilfs_btnode_abort_change_key() after an error occurred during a b-tree
update operation and the buffer was later reused in that state.
Fix this issue by using nilfs_btnode_delete() to abandon the unused
preallocated buffer in nilfs_btnode_abort_change_key().
Link: https://lkml.kernel.org/r/20230513102428.10223-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+b0a35a5c1f7e846d3b09@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/
000000000000d1d6c205ebc4d512@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janne Grunau [Sun, 12 Feb 2023 12:16:32 +0000 (13:16 +0100)]
nios2: dts: Fix tse_mac "max-frame-size" property
commit
85041e12418fd0c08ff972b7729f7971afb361f8 upstream.
The given value of 1518 seems to refer to the layer 2 ethernet frame
size without 802.1Q tag. Actual use of the "max-frame-size" including in
the consumer of the "altr,tse-1.0" compatible is the MTU.
Fixes:
95acd4c7b69c ("nios2: Device tree support")
Fixes:
61c610ec61bb ("nios2: Add Max10 device tree")
Cc: <stable@vger.kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nhat Pham [Tue, 30 May 2023 22:24:40 +0000 (15:24 -0700)]
zswap: do not shrink if cgroup may not zswap
commit
0bdf0efa180a9cb1361cbded4e2260a49306ac89 upstream.
Before storing a page, zswap first checks if the number of stored pages
exceeds the limit specified by memory.zswap.max, for each cgroup in the
hierarchy. If this limit is reached or exceeded, then zswap shrinking is
triggered and short-circuits the store attempt.
However, since the zswap's LRU is not memcg-aware, this can create the
following pathological behavior: the cgroup whose zswap limit is 0 will
evict pages from other cgroups continually, without lowering its own zswap
usage. This means the shrinking will continue until the need for swap
ceases or the pool becomes empty.
As a result of this, we observe a disproportionate amount of zswap
writeback and a perpetually small zswap pool in our experiments, even
though the pool limit is never hit.
More generally, a cgroup might unnecessarily evict pages from other
cgroups before we drive the memcg back below its limit.
This patch fixes the issue by rejecting zswap store attempt without
shrinking the pool when obj_cgroup_may_zswap() returns false.
[akpm@linux-foundation.org: fix return of unintialized value]
[akpm@linux-foundation.org: s/ENOSPC/ENOMEM/]
Link: https://lkml.kernel.org/r/20230530222440.2777700-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20230530232435.3097106-1-nphamcs@gmail.com
Fixes:
f4840ccfca25 ("zswap: memcg accounting")
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luís Henriques [Mon, 29 May 2023 15:26:45 +0000 (16:26 +0100)]
ocfs2: check new file size on fallocate call
commit
26a6ffff7de5dd369cdb12e38ba11db682f1dec0 upstream.
When changing a file size with fallocate() the new size isn't being
checked. In particular, the FSIZE ulimit isn't being checked, which makes
fstest generic/228 fail. Simply adding a call to inode_newsize_ok() fixes
this issue.
Link: https://lkml.kernel.org/r/20230529152645.32680-1-lhenriques@suse.de
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Mark Fasheh <mark@fasheh.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luís Henriques [Mon, 22 May 2023 10:21:12 +0000 (11:21 +0100)]
ocfs2: fix use-after-free when unmounting read-only filesystem
commit
50d927880e0f90d5cb25e897e9d03e5edacc79a8 upstream.
It's trivial to trigger a use-after-free bug in the ocfs2 quotas code using
fstest generic/452. After a read-only remount, quotas are suspended and
ocfs2_mem_dqinfo is freed through ->ocfs2_local_free_info(). When unmounting
the filesystem, an UAF access to the oinfo will eventually cause a crash.
BUG: KASAN: slab-use-after-free in timer_delete+0x54/0xc0
Read of size 8 at addr
ffff8880389a8208 by task umount/669
...
Call Trace:
<TASK>
...
timer_delete+0x54/0xc0
try_to_grab_pending+0x31/0x230
__cancel_work_timer+0x6c/0x270
ocfs2_disable_quotas.isra.0+0x3e/0xf0 [ocfs2]
ocfs2_dismount_volume+0xdd/0x450 [ocfs2]
generic_shutdown_super+0xaa/0x280
kill_block_super+0x46/0x70
deactivate_locked_super+0x4d/0xb0
cleanup_mnt+0x135/0x1f0
...
</TASK>
Allocated by task 632:
kasan_save_stack+0x1c/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x8b/0x90
ocfs2_local_read_info+0xe3/0x9a0 [ocfs2]
dquot_load_quota_sb+0x34b/0x680
dquot_load_quota_inode+0xfe/0x1a0
ocfs2_enable_quotas+0x190/0x2f0 [ocfs2]
ocfs2_fill_super+0x14ef/0x2120 [ocfs2]
mount_bdev+0x1be/0x200
legacy_get_tree+0x6c/0xb0
vfs_get_tree+0x3e/0x110
path_mount+0xa90/0xe10
__x64_sys_mount+0x16f/0x1a0
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Freed by task 650:
kasan_save_stack+0x1c/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0xf9/0x150
__kmem_cache_free+0x89/0x180
ocfs2_local_free_info+0x2ba/0x3f0 [ocfs2]
dquot_disable+0x35f/0xa70
ocfs2_susp_quotas.isra.0+0x159/0x1a0 [ocfs2]
ocfs2_remount+0x150/0x580 [ocfs2]
reconfigure_super+0x1a5/0x3a0
path_mount+0xc8a/0xe10
__x64_sys_mount+0x16f/0x1a0
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Link: https://lkml.kernel.org/r/20230522102112.9031-1-lhenriques@suse.de
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Segall [Tue, 30 May 2023 18:32:28 +0000 (11:32 -0700)]
epoll: ep_autoremove_wake_function should use list_del_init_careful
commit
2192bba03d80f829233bfa34506b428f71e531e7 upstream.
autoremove_wake_function uses list_del_init_careful, so should epoll's
more aggressive variant. It only doesn't because it was copied from an
older wait.c rather than the most recent.
[bsegall@google.com: add comment]
Link: https://lkml.kernel.org/r/xm26bki0ulsr.fsf_-_@google.com
Link: https://lkml.kernel.org/r/xm26pm6hvfer.fsf@google.com
Fixes:
a16ceb139610 ("epoll: autoremove wakers even more aggressively")
Signed-off-by: Ben Segall <bsegall@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 9 Jun 2023 10:48:44 +0000 (13:48 +0300)]
wifi: cfg80211: fix double lock bug in reg_wdev_chan_valid()
commit
996c3117dae4c02b38a3cb68e5c2aec9d907ec15 upstream.
The locking was changed recently so now the caller holds the wiphy_lock()
lock. Taking the lock inside the reg_wdev_chan_valid() function will
lead to a deadlock.
Fixes:
f7e60032c661 ("wifi: cfg80211: fix locking in regulatory disconnect")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/40c4114a-6cb4-4abf-b013-300b598aba65@moroto.mountain
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Tue, 6 Jun 2023 12:34:48 +0000 (14:34 +0200)]
wifi: cfg80211: fix locking in regulatory disconnect
commit
f7e60032c6618dfd643c7210d5cba2789e2de2e2 upstream.
This should use wiphy_lock() now instead of requiring the
RTNL, since __cfg80211_leave() via cfg80211_leave() is now
requiring that lock to be held.
Fixes:
a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Tue, 30 May 2023 10:01:22 +0000 (11:01 +0100)]
irqchip/gic: Correctly validate OF quirk descriptors
[ Upstream commit
91539341a3b6e9c868024a4292455dae36e6f58c ]
When checking for OF quirks, make sure either 'compatible' or 'property'
is set, and give up otherwise.
This avoids non-OF quirks being randomly applied as they don't have any
of the OF data that need checking.
Cc: Douglas Anderson <dianders@chromium.org>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes:
44bd78dd2b88 ("irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tatsuki Sugiura [Sat, 20 May 2023 12:23:50 +0000 (21:23 +0900)]
NVMe: Add MAXIO 1602 to bogus nid list.
[ Upstream commit
a3a9d63dcd15535e7fdf4c7c1b32bfaed762973a ]
HIKSEMI FUTURE M.2 SSD uses the same dummy nguid and eui64.
I confirmed it with my two devices.
This patch marks the controller as NVME_QUIRK_BOGUS_NID.
---------------------------------------------------------
sugi@tempest:~% sudo nvme id-ctrl /dev/nvme0
NVME Identify Controller:
vid : 0x1e4b
ssvid : 0x1e4b
sn :
30096022612
mn : HS-SSD-FUTURE 2048G
fr : SN10542
rab : 0
ieee : 000000
cmic : 0
mdts : 7
cntlid : 0
ver : 0x10400
rtd3r : 0x7a120
rtd3e : 0x1e8480
oaes : 0x200
ctratt : 0x2
rrls : 0
cntrltype : 1
fguid :
00000000-0000-0000-0000-
000000000000
<snip...>
---------------------------------------------------------
---------------------------------------------------------
sugi@tempest:~% sudo nvme id-ns /dev/nvme0n1
NVME Identify Namespace 1:
<snip...>
nguid :
00000000000000000000000000000000
eui64 :
0000000000000002
lbaf 0 : ms:0 lbads:9 rp:0 (in use)
---------------------------------------------------------
Signed-off-by: Tatsuki Sugiura <sugi@nemui.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wenwen Chen [Thu, 25 May 2023 08:26:26 +0000 (16:26 +0800)]
io_uring: unlock sqd->lock before sq thread release CPU
[ Upstream commit
533ab73f5b5c95dcb4152b52d5482abcc824c690 ]
The sq thread actively releases CPU resources by calling the
cond_resched() and schedule() interfaces when it is idle. Therefore,
more resources are available for other threads to run.
There exists a problem in sq thread: it does not unlock sqd->lock before
releasing CPU resources every time. This makes other threads pending on
sqd->lock for a long time. For example, the following interfaces all
require sqd->lock: io_sq_offload_create(), io_register_iowq_max_workers()
and io_ring_exit_work().
Before the sq thread releases CPU resources, unlocking sqd->lock will
provide the user a better experience because it can respond quickly to
user requests.
Signed-off-by: Kanchan Joshi<joshi.k@samsung.com>
Signed-off-by: Wenwen Chen<wenwen.chen@samsung.com>
Link: https://lore.kernel.org/r/20230525082626.577862-1-wenwen.chen@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sukrut Bellary [Wed, 3 May 2023 23:15:07 +0000 (16:15 -0700)]
drm:amd:amdgpu: Fix missing buffer object unlock in failure path
[ Upstream commit
60ecaaf54886b0642d5c4744f7fbf1ff0d6b3e42 ]
smatch warning -
1) drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:3615 gfx_v9_0_kiq_resume()
warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'.
2) drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:6901 gfx_v10_0_kiq_resume()
warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'.
Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ross Lagerwall [Wed, 26 Apr 2023 16:40:05 +0000 (17:40 +0100)]
xen/blkfront: Only check REQ_FUA for writes
[ Upstream commit
b6ebaa8100090092aa602530d7e8316816d0c98d ]
The existing code silently converts read operations with the
REQ_FUA bit set into write-barrier operations. This results in data
loss as the backend scribbles zeroes over the data instead of returning
it.
While the REQ_FUA bit doesn't make sense on a read operation, at least
one well-known out-of-tree kernel module does set it and since it
results in data loss, let's be safe here and only look at REQ_FUA for
writes.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230426164005.2213139-1-ross.lagerwall@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxim Kochetkov [Fri, 12 May 2023 11:03:42 +0000 (14:03 +0300)]
ASoC: dwc: move DMA init to snd_soc_dai_driver probe()
[ Upstream commit
011a8719d6105dcb48077ea7a6a88ac019d4aa50 ]
When using DMA mode we are facing with Oops:
[ 396.458157] Unable to handle kernel access to user memory without uaccess routines at virtual address
000000000000000c
[ 396.469374] Oops [#1]
[ 396.471839] Modules linked in:
[ 396.475144] CPU: 0 PID: 114 Comm: arecord Not tainted 6.0.0-00164-g9a8eccdaf2be-dirty #68
[ 396.483619] Hardware name: YMP ELCT FPGA (DT)
[ 396.488156] epc : dmaengine_pcm_open+0x1d2/0x342
[ 396.493227] ra : dmaengine_pcm_open+0x1d2/0x342
[ 396.498140] epc :
ffffffff807fe346 ra :
ffffffff807fe346 sp :
ffffffc804e138f0
[ 396.505602] gp :
ffffffff817bf730 tp :
ffffffd8042c8ac0 t0 :
6500000000000000
[ 396.513045] t1 :
0000000000000064 t2 :
656e69676e65616d s0 :
ffffffc804e13990
[ 396.520477] s1 :
ffffffd801b86a18 a0 :
0000000000000026 a1 :
ffffffff816920f8
[ 396.527897] a2 :
0000000000000010 a3 :
fffffffffffffffe a4 :
0000000000000000
[ 396.535319] a5 :
0000000000000000 a6 :
ffffffd801b87040 a7 :
0000000000000038
[ 396.542740] s2 :
ffffffd801b94a00 s3 :
0000000000000000 s4 :
ffffffd80427f5e8
[ 396.550153] s5 :
ffffffd80427f5e8 s6 :
ffffffd801b44410 s7 :
fffffffffffffff5
[ 396.557569] s8 :
0000000000000800 s9 :
0000000000000001 s10:
ffffffff8066d254
[ 396.564978] s11:
ffffffd8059cf768 t3 :
ffffffff817d5577 t4 :
ffffffff817d5577
[ 396.572391] t5 :
ffffffff817d5578 t6 :
ffffffc804e136e8
[ 396.577876] status:
0000000200000120 badaddr:
000000000000000c cause:
000000000000000d
[ 396.586007] [<
ffffffff806839f4>] snd_soc_component_open+0x1a/0x68
[ 396.592439] [<
ffffffff807fdd62>] __soc_pcm_open+0xf0/0x502
[ 396.598217] [<
ffffffff80685d86>] soc_pcm_open+0x2e/0x4e
[ 396.603741] [<
ffffffff8066cea4>] snd_pcm_open_substream+0x442/0x68e
[ 396.610313] [<
ffffffff8066d1ea>] snd_pcm_open+0xfa/0x212
[ 396.615868] [<
ffffffff8066d39c>] snd_pcm_capture_open+0x3a/0x60
[ 396.622048] [<
ffffffff8065b35a>] snd_open+0xa8/0x17a
[ 396.627421] [<
ffffffff801ae036>] chrdev_open+0xa0/0x218
[ 396.632893] [<
ffffffff801a5a28>] do_dentry_open+0x17c/0x2a6
[ 396.638713] [<
ffffffff801a6d9a>] vfs_open+0x1e/0x26
[ 396.643850] [<
ffffffff801b8544>] path_openat+0x96e/0xc96
[ 396.649518] [<
ffffffff801b9390>] do_filp_open+0x7c/0xf6
[ 396.655034] [<
ffffffff801a6ff2>] do_sys_openat2+0x8a/0x11e
[ 396.660765] [<
ffffffff801a735a>] sys_openat+0x50/0x7c
[ 396.666068] [<
ffffffff80003aca>] ret_from_syscall+0x0/0x2
[ 396.674964] ---[ end trace
0000000000000000 ]---
It happens because of play_dma_data/capture_dma_data pointers are NULL.
Current implementation assigns these pointers at snd_soc_dai_driver
startup() callback and reset them back to NULL at shutdown(). But
soc_pcm_open() sequence uses DMA pointers in dmaengine_pcm_open()
before snd_soc_dai_driver startup().
Most generic DMA capable I2S drivers use snd_soc_dai_driver probe()
callback to init DMA pointers only once at probe. So move DMA init
to dw_i2s_dai_probe and drop shutdown() and startup() callbacks.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20230512110343.66664-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Binding [Fri, 14 Apr 2023 15:25:51 +0000 (16:25 +0100)]
ASoC: cs35l41: Fix default regmap values for some registers
[ Upstream commit
e2d035f5a7d597bbabc268e236ec6c0408c4af0e ]
Several values do not match the defaults of CS35L41, fix them.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230414152552.574502-4-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liviu Dudau [Tue, 9 May 2023 17:29:21 +0000 (18:29 +0100)]
mips: Move initrd_start check after initrd address sanitisation.
[ Upstream commit
4897a898a216058dec55e5e5902534e6e224fcdf ]
PAGE_OFFSET is technically a virtual address so when checking the value of
initrd_start against it we should make sure that it has been sanitised from
the values passed by the bootloader. Without this change, even with a bootloader
that passes correct addresses for an initrd, we are failing to load it on MT7621
boards, for example.
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manuel Lauss [Thu, 11 May 2023 15:30:10 +0000 (17:30 +0200)]
MIPS: Alchemy: fix dbdma2
[ Upstream commit
2d645604f69f3a772d58ead702f9a8e84ab2b342 ]
Various fixes for the Au1200/Au1550/Au1300 DBDMA2 code:
- skip cache invalidation if chip has working coherency circuitry.
- invalidate KSEG0-portion of the (physical) data address.
- force the dma channel doorbell write out to bus immediately with
a sync.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manuel Lauss [Wed, 10 May 2023 10:33:23 +0000 (12:33 +0200)]
MIPS: Restore Au1300 support
[ Upstream commit
f2041708dee30a3425f680265c337acd28293782 ]
The Au1300, at least the one I have to test, uses the NetLogic vendor
ID, but commit
95b8a5e0111a ("MIPS: Remove NETLOGIC support") also
dropped Au1300 detection. Restore Au1300 detection.
Tested on DB1300 with Au1380 chip.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manuel Lauss [Tue, 9 May 2023 18:57:44 +0000 (20:57 +0200)]
MIPS: unhide PATA_PLATFORM
[ Upstream commit
75b18aac6fa39a1720677970cfcb52ecea1eb44c ]
Alchemy DB1200/DB1300 boards can use the pata_platform driver.
Unhide the config entry in all of MIPS.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Helge Deller [Wed, 17 May 2023 13:54:40 +0000 (15:54 +0200)]
parisc: Flush gatt writes and adjust gatt mask in parisc_agp_mask_memory()
[ Upstream commit
d703797380c540bbeac03f104ebcfc364eaf47cc ]
Flush caches after changing gatt entries and calculate entry according
to SBA requirements.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Helge Deller [Wed, 17 May 2023 13:52:30 +0000 (15:52 +0200)]
parisc: Improve cache flushing for PCXL in arch_sync_dma_for_cpu()
[ Upstream commit
59fa12646d9f56c842b4d5b6418ed77af625c588 ]
Add comment in arch_sync_dma_for_device() and handle the direction flag in
arch_sync_dma_for_cpu().
When receiving data from the device (DMA_FROM_DEVICE) unconditionally
purge the data cache in arch_sync_dma_for_cpu().
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amadeusz Sławiński [Fri, 19 May 2023 20:17:11 +0000 (22:17 +0200)]
ASoC: Intel: avs: Add missing checks on FE startup
[ Upstream commit
25148f57a2a6d157779bae494852e172952ba980 ]
Constraint functions have return values, they should be checked for
potential errors.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-8-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cezary Rojewski [Fri, 19 May 2023 20:17:09 +0000 (22:17 +0200)]
ASoC: Intel: avs: Account for UID of ACPI device
[ Upstream commit
836855100b87b4dd7a82546131779dc255c18b67 ]
Configurations with multiple codecs attached to the platform are
supported but only if each from the set is different. Add new field
representing the 'Unique ID' so that codecs that share Vendor and Part
IDs can be differentiated and thus enabling support for such
configurations.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ranjani Sridharan [Wed, 17 May 2023 18:57:31 +0000 (13:57 -0500)]
ASoC: soc-pcm: test if a BE can be prepared
[ Upstream commit
e123036be377ddf628226a7c6d4f9af5efd113d3 ]
In the BE hw_params configuration, the existing code checks if any of the
existing FEs are prepared, running, paused or suspended - and skips the
configuration in those cases. This allows multiple calls of hw_params
which the ALSA state machine supports.
This check is not handled for the prepare stage, which can lead to the
same BE being prepared multiple times. This patch adds a check similar to
that of the hw_params, with the main difference being that the suspended
state is allowed: the ALSA state machine allows a transition from
suspended to prepared with hw_params skipped.
This problem was detected on Intel IPC4/SoundWire devices, where the BE
dailink .prepare stage is used to configure the SoundWire stream with a
bank switch. Multiple .prepare calls lead to conflicts with the .trigger
operation with IPC4 configurations. This problem was not detected earlier
on Intel devices, HDaudio BE dailinks detect that the link is already
prepared and skip the configuration, and for IPC3 devices there is no BE
trigger.
Link: https://github.com/thesofproject/sof/issues/7596
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230517185731.487124-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Thumshirn [Thu, 4 May 2023 11:58:13 +0000 (13:58 +0200)]
btrfs: handle memory allocation failure in btrfs_csum_one_bio
[ Upstream commit
806570c0bb7b4847828c22c4934fcf2dc8fc572f ]
Since
f8a53bb58ec7 ("btrfs: handle checksum generation in the storage
layer") the failures of btrfs_csum_one_bio() are handled via
bio_end_io().
This means, we can return BLK_STS_RESOURCE from btrfs_csum_one_bio() in
case the allocation of the ordered sums fails.
This also fixes a syzkaller report, where injecting a failure into the
kvzalloc() call results in a BUG_ON().
Reported-by: syzbot+d8941552e21eac774778@syzkaller.appspotmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qu Wenruo [Thu, 13 Apr 2023 05:57:17 +0000 (13:57 +0800)]
btrfs: scrub: try harder to mark RAID56 block groups read-only
[ Upstream commit
7561551e7ba870b9659083b95feb520fb2dacce3 ]
Currently we allow a block group not to be marked read-only for scrub.
But for RAID56 block groups if we require the block group to be
read-only, then we're allowed to use cached content from scrub stripe to
reduce unnecessary RAID56 reads.
So this patch would:
- Make btrfs_inc_block_group_ro() try harder
During my tests, for cases like btrfs/061 and btrfs/064, we can hit
ENOSPC from btrfs_inc_block_group_ro() calls during scrub.
The reason is if we only have one single data chunk, and trying to
scrub it, we won't have any space left for any newer data writes.
But this check should be done by the caller, especially for scrub
cases we only temporarily mark the chunk read-only.
And newer data writes would always try to allocate a new data chunk
when needed.
- Return error for scrub if we failed to mark a RAID56 chunk read-only
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maya Matuszczyk [Mon, 15 May 2023 18:48:43 +0000 (20:48 +0200)]
drm: panel-orientation-quirks: Change Air's quirk to support Air Plus
[ Upstream commit
1aa7f416175619e0286fddc5fc44e968b06bf2aa ]
It turned out that Aya Neo Air Plus had a different board name than
expected.
This patch changes Aya Neo Air's quirk to account for that, as both
devices share "Air" in DMI product name.
Tested on Air claiming to be an Air Pro, and on Air Plus.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515184843.1552612-1-maccraft123mc@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mario Limonciello [Tue, 16 May 2023 18:25:40 +0000 (13:25 -0500)]
power: supply: Fix logic checking if system is running from battery
[ Upstream commit
95339f40a8b652b5b1773def31e63fc53c26378a ]
The logic used for power_supply_is_system_supplied() counts all power
supplies and assumes that the system is running from AC if there is
either a non-battery power-supply reporting to be online or if no
power-supplies exist at all.
The second rule is for desktop systems, that don't have any
battery/charger devices. These systems will incorrectly report to be
powered from battery once a device scope power-supply is registered
(e.g. a HID device), since these power-supplies increase the counter.
Apart from HID devices, recent dGPUs provide UCSI power supplies on a
desktop systems. The dGPU by default doesn't have anything plugged in so
it's 'offline'. This makes power_supply_is_system_supplied() return 0
with a count of 1 meaning all drivers that use this get a wrong judgement.
To fix this case adjust the logic to also examine the scope of the power
supply. If the power supply is deemed a device power supply, then don't
count it.
Cc: Evan Quan <Evan.Quan@amd.com>
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Fri, 12 May 2023 16:45:06 +0000 (18:45 +0200)]
irqchip/meson-gpio: Mark OF related data as maybe unused
[ Upstream commit
14130211be5366a91ec07c3284c183b75d8fba17 ]
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/irqchip/irq-meson-gpio.c:153:34: error: ‘meson_irq_gpio_matches’ defined but not used [-Werror=unused-const-variable=]
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230512164506.212267-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Mon, 15 May 2023 20:13:51 +0000 (13:13 -0700)]
irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues
[ Upstream commit
44bd78dd2b8897f59b7e3963f088caadb7e4f047 ]
Some Chromebooks with Mediatek SoCs have a problem where the firmware
doesn't properly save/restore certain GICR registers. Newer
Chromebooks should fix this issue and we may be able to do firmware
updates for old Chromebooks. At the moment, the only known issue with
these Chromebooks is that we can't enable "pseudo NMIs" since the
priority register can be lost. Enabling "pseudo NMIs" on Chromebooks
with the problematic firmware causes crashes and freezes.
Let's detect devices with this problem and then disable "pseudo NMIs"
on them. We'll detect the problem by looking for the presence of the
"mediatek,broken-save-restore-fw" property in the GIC device tree
node. Any devices with fixed firmware will not have this property.
Our detection plan works because we never bake a Chromebook's device
tree into firmware. Instead, device trees are always bundled with the
kernel. We'll update the device trees of all affected Chromebooks and
then we'll never enable "pseudo NMI" on a kernel that is bundled with
old device trees. When a firmware update is shipped that fixes this
issue it will know to patch the device tree to remove the property.
In order to make this work, the quick detection mechanism of the GICv3
code is extended to be able to look for properties in addition to
looking at "compatible".
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230515131353.v2.2.I88dc0a0eb1d9d537de61604cd8994ecc55c0cac1@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Osama Muhammad [Mon, 15 May 2023 17:29:38 +0000 (22:29 +0500)]
regulator: Fix error checking for debugfs_create_dir
[ Upstream commit
2bf1c45be3b8f3a3f898d0756c1282f09719debd ]
This patch fixes the error checking in core.c in debugfs_create_dir.
The correct way to check if an error occurred is 'IS_ERR' inline function.
Signed-off-by: Osama Muhammad <osmtendev@gmail.com
Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com
Link: https://lore.kernel.org/r/20230515172938.13338-1-osmtendev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandru Sorodoc [Fri, 12 May 2023 10:15:17 +0000 (13:15 +0300)]
platform/x86: asus-wmi: Ignore WMI events with codes 0x7B, 0xC0
[ Upstream commit
362c1f2ec82cb65940e1c73e15a395a7a891fc6f ]
On ASUS GU604V the key 0x7B is issued when the charger is connected or
disconnected, and key 0xC0 is issued when an external display is
connected or disconnected.
This commit maps them to KE_IGNORE to slience kernel messages about
unknown keys, such as:
kernel: asus_wmi: Unknown key code 0x7b
Signed-off-by: Alexandru Sorodoc <ealex95@gmail.com>
Link: https://lore.kernel.org/r/20230512101517.47416-1-ealex95@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mika Westerberg [Thu, 11 May 2023 12:19:05 +0000 (15:19 +0300)]
PCI/DPC: Quirk PIO log size for Intel Ice Lake Root Ports
[ Upstream commit
3b8803494a0612acdeee714cb72aa142b1e05ce5 ]
Commit
5459c0b70467 ("PCI/DPC: Quirk PIO log size for certain Intel Root
Ports") added quirks for Tiger and Alder Lake Root Ports but missed that
the same issue exists also in the previous generation, Ice Lake.
Apply the quirk for Ice Lake Root Ports as well. This prevents kernel
complaints like:
DPC: RP PIO log size 0 is invalid
and also enables the DPC driver to dump the RP PIO Log registers when DPC
is triggered.
[bhelgaas: add dmesg warning and RP PIO Log dump info]
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=209943
Link: https://lore.kernel.org/r/20230511121905.73949-1-mika.westerberg@linux.intel.com
Reported-by: Mark Blakeney <mark.blakeney@bullet-systems.net>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Sun, 5 Mar 2023 20:52:26 +0000 (21:52 +0100)]
power: supply: Ratelimit no data debug output
[ Upstream commit
155c45a25679f571c2ae57d10db843a9dfc63430 ]
Reduce the amount of output this dev_dbg() statement emits into logs,
otherwise if system software polls the sysfs entry for data and keeps
getting -ENODATA, it could end up filling the logs up.
This does in fact make systemd journald choke, since during boot the
sysfs power supply entries are polled and if journald starts at the
same time, the journal is just being repeatedly filled up, and the
system stops on trying to start journald without booting any further.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mirsad Todorovac [Tue, 11 Apr 2023 17:15:20 +0000 (20:15 +0300)]
selftests: gpio: gpio-sim: Fix BUG: test FAILED due to recent change
[ Upstream commit
976d3c6778e99390c6d854d140b746d12ea18a51 ]
According to Mirsad the gpio-sim.sh test appears to FAIL in a wrong way
due to missing initialisation of shell variables:
4.2. Bias settings work correctly
cat: /sys/devices/platform/gpio-sim.0/gpiochip18/sim_gpio0/value: No such file or directory
./gpio-sim.sh: line 393: test: =: unary operator expected
bias setting does not work
GPIO gpio-sim test FAIL
After this change the test passed:
4.2. Bias settings work correctly
GPIO gpio-sim test PASS
His testing environment is AlmaLinux 8.7 on Lenovo desktop box with
the latest Linux kernel based on v6.2:
Linux 6.2.0-mglru-kmlk-andy-09238-gd2980d8d8265 x86_64
Suggested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Milo Spadacini [Mon, 8 May 2023 13:18:48 +0000 (15:18 +0200)]
tools: gpio: fix debounce_period_us output of lsgpio
[ Upstream commit
eb4b8eca1bad98f4b8574558a74f041f9acb5a54 ]
Fix incorrect output that could occur when more attributes are used and
GPIO_V2_LINE_ATTR_ID_DEBOUNCE is not the first one.
Signed-off-by: Milo Spadacini <milo.spadacini@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Sun, 23 Apr 2023 15:08:37 +0000 (17:08 +0200)]
ARM: dts: vexpress: add missing cache properties
[ Upstream commit
328acc5657c6197753238d7ce0a6924ead829347 ]
As all level 2 and level 3 caches are unified, add required
cache-unified property to fix warnings like:
vexpress-v2p-ca5s.dtb: cache-controller@
2c0f0000: 'cache-unified' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230423150837.118466-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sat, 15 Apr 2023 18:23:39 +0000 (20:23 +0200)]
power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule()
[ Upstream commit
59dddea9879713423c7b2ade43c423bb71e0d216 ]
Use mod_delayed_work() instead of separate cancel_delayed_work_sync() +
schedule_delayed_work() calls.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sat, 15 Apr 2023 16:07:32 +0000 (18:07 +0200)]
power: supply: sc27xx: Fix external_power_changed race
[ Upstream commit
4d5c129d6c8993fe96e9ae712141eedcb9ca68c2 ]
sc27xx_fgu_external_power_changed() dereferences data->battery,
which gets sets in ab8500_btemp_probe() like this:
data->battery = devm_power_supply_register(dev, &sc27xx_fgu_desc,
&fgu_cfg);
As soon as devm_power_supply_register() has called device_add()
the external_power_changed callback can get called. So there is a window
where sc27xx_fgu_external_power_changed() may get called while
data->battery has not been set yet leading to a NULL pointer dereference.
Fixing this is easy. The external_power_changed callback gets passed
the power_supply which will eventually get stored in data->battery,
so sc27xx_fgu_external_power_changed() can simply directly use
the passed in psy argument which is always valid.
After this change sc27xx_fgu_external_power_changed() is reduced to just
"power_supply_changed(psy);" and it has the same prototype. While at it
simply replace it with making the external_power_changed callback
directly point to power_supply_changed.
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sat, 15 Apr 2023 16:07:29 +0000 (18:07 +0200)]
power: supply: ab8500: Fix external_power_changed race
[ Upstream commit
a5299ce4e96f3e8930e9c051b28d8093ada87b08 ]
ab8500_btemp_external_power_changed() dereferences di->btemp_psy,
which gets sets in ab8500_btemp_probe() like this:
di->btemp_psy = devm_power_supply_register(dev, &ab8500_btemp_desc,
&psy_cfg);
As soon as devm_power_supply_register() has called device_add()
the external_power_changed callback can get called. So there is a window
where ab8500_btemp_external_power_changed() may get called while
di->btemp_psy has not been set yet leading to a NULL pointer dereference.
Fixing this is easy. The external_power_changed callback gets passed
the power_supply which will eventually get stored in di->btemp_psy,
so ab8500_btemp_external_power_changed() can simply directly use
the passed in psy argument which is always valid.
And the same applies to ab8500_fg_external_power_changed().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kunihiko Hayashi [Fri, 2 Jun 2023 02:05:02 +0000 (11:05 +0900)]
of: overlay: Fix missing of_node_put() in error case of init_overlay_changeset()
[ Upstream commit
39affd1fdf65983904fafc07cf607cff737eaf30 ]
In init_overlay_changeset(), the variable "node" is from
of_get_child_by_name(), and the "node" should be discarded in error case.
Fixes:
d1651b03c2df ("of: overlay: add overlay symbols to live device tree")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230602020502.11693-1-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Namjae Jeon [Wed, 31 May 2023 08:59:32 +0000 (17:59 +0900)]
ksmbd: validate smb request protocol id
[ Upstream commit
1c1bcf2d3ea061613119b534f57507c377df20f9 ]
This patch add the validation for smb request protocol id.
If it is not one of the four ids(SMB1_PROTO_NUMBER, SMB2_PROTO_NUMBER,
SMB2_TRANSFORM_PROTO_NUM, SMB2_COMPRESSION_TRANSFORM_ID), don't allow
processing the request. And this will fix the following KASAN warning
also.
[ 13.905265] BUG: KASAN: slab-out-of-bounds in init_smb2_rsp_hdr+0x1b9/0x1f0
[ 13.905900] Read of size 16 at addr
ffff888005fd2f34 by task kworker/0:2/44
...
[ 13.908553] Call Trace:
[ 13.908793] <TASK>
[ 13.908995] dump_stack_lvl+0x33/0x50
[ 13.909369] print_report+0xcc/0x620
[ 13.910870] kasan_report+0xae/0xe0
[ 13.911519] kasan_check_range+0x35/0x1b0
[ 13.911796] init_smb2_rsp_hdr+0x1b9/0x1f0
[ 13.912492] handle_ksmbd_work+0xe5/0x820
Cc: stable@vger.kernel.org
Reported-by: Chih-Yen Chang <cc85nod@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manivannan Sadhasivam [Wed, 17 May 2023 11:46:35 +0000 (17:16 +0530)]
EDAC/qcom: Get rid of hardcoded register offsets
[ Upstream commit
cbd77119b6355872cd308a60e99f9ca678435d15 ]
The LLCC EDAC register offsets varies between each SoC. Hardcoding the
register offsets won't work and will often result in crash due to
accessing the wrong locations.
Hence, get the register offsets from the LLCC driver matching the
individual SoCs.
Cc: <stable@vger.kernel.org> # 6.0: 5365cea199c7 ("soc: qcom: llcc: Rename reg_offset structs to reflect LLCC version")
Cc: <stable@vger.kernel.org> # 6.0: c13d7d261e36 ("soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver")
Cc: <stable@vger.kernel.org> # 6.0
Fixes:
a6e9d7ef252c ("soc: qcom: llcc: Add configuration data for SM8450 SoC")
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517114635.76358-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manivannan Sadhasivam [Tue, 14 Mar 2023 08:04:41 +0000 (13:34 +0530)]
qcom: llcc/edac: Fix the base address used for accessing LLCC banks
[ Upstream commit
ee13b5008707948d3052c1b5aab485c6cd53658e ]
The Qualcomm LLCC/EDAC drivers were using a fixed register stride for
accessing the (Control and Status Registers) CSRs of each LLCC bank.
This stride only works for some SoCs like SDM845 for which driver
support was initially added.
But the later SoCs use different register stride that vary between the
banks with holes in-between. So it is not possible to use a single register
stride for accessing the CSRs of each bank. By doing so could result in a
crash.
For fixing this issue, let's obtain the base address of each LLCC bank from
devicetree and get rid of the fixed stride. This also means, there is no
need to rely on reg-names property and the base addresses can be obtained
using the index.
First index is LLCC bank 0 and last index is LLCC broadcast. If the SoC
supports more than one bank, then those need to be defined in devicetree
for index from 1..N-1.
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-13-manivannan.sadhasivam@linaro.org
Stable-dep-of:
cbd77119b635 ("EDAC/qcom: Get rid of hardcoded register offsets")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qi Zheng [Wed, 17 May 2023 07:45:45 +0000 (07:45 +0000)]
cgroup: fix missing cpus_read_{lock,unlock}() in cgroup_transfer_tasks()
[ Upstream commit
ab1de7ead871ebe6d12a774c3c25de0388cde082 ]
The commit
4f7e7236435c ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock()
deadlock") fixed the deadlock between cgroup_threadgroup_rwsem and
cpus_read_lock() by introducing cgroup_attach_{lock,unlock}() and removing
cpus_read_{lock,unlock}() from cpuset_attach(). But cgroup_transfer_tasks()
was missed and not handled, which will cause th following warning:
WARNING: CPU: 0 PID: 589 at kernel/cpu.c:526 lockdep_assert_cpus_held+0x32/0x40
CPU: 0 PID: 589 Comm: kworker/1:4 Not tainted 6.4.0-rc2-next-
20230517 #50
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Workqueue: events cpuset_hotplug_workfn
RIP: 0010:lockdep_assert_cpus_held+0x32/0x40
<...>
Call Trace:
<TASK>
cpuset_attach+0x40/0x240
cgroup_migrate_execute+0x452/0x5e0
? _raw_spin_unlock_irq+0x28/0x40
cgroup_transfer_tasks+0x1f3/0x360
? find_held_lock+0x32/0x90
? cpuset_hotplug_workfn+0xc81/0xed0
cpuset_hotplug_workfn+0xcb1/0xed0
? process_one_work+0x248/0x5b0
process_one_work+0x2b9/0x5b0
worker_thread+0x56/0x3b0
? process_one_work+0x5b0/0x5b0
kthread+0xf1/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
So just use the cgroup_attach_{lock,unlock}() helper to fix it.
Reported-by: Zhao Gongyi <zhaogongyi@bytedance.com>
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Fixes:
05c7b7a92cc8 ("cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug")
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Sperbeck [Sun, 21 May 2023 19:29:53 +0000 (19:29 +0000)]
cgroup: always put cset in cgroup_css_set_put_fork
[ Upstream commit
2bd110339288c18823dcace602b63b0d8627e520 ]
A successful call to cgroup_css_set_fork() will always have taken
a ref on kargs->cset (regardless of CLONE_INTO_CGROUP), so always
do a corresponding put in cgroup_css_set_put_fork().
Without this, a cset and its contained css structures will be
leaked for some fork failures. The following script reproduces
the leak for a fork failure due to exceeding pids.max in the
pids controller. A similar thing can happen if we jump to the
bad_fork_cancel_cgroup label in copy_process().
[ -z "$1" ] && echo "Usage $0 pids-root" && exit 1
PID_ROOT=$1
CGROUP=$PID_ROOT/foo
[ -e $CGROUP ] && rmdir -f $CGROUP
mkdir $CGROUP
echo 5 > $CGROUP/pids.max
echo $$ > $CGROUP/cgroup.procs
fork_bomb()
{
set -e
for i in $(seq 10); do
/bin/sleep 3600 &
done
}
(fork_bomb) &
wait
echo $$ > $PID_ROOT/cgroup.procs
kill $(cat $CGROUP/cgroup.procs)
rmdir $CGROUP
Fixes:
ef2c41cf38a7 ("clone3: allow spawning processes into cgroups")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kamalesh Babulal [Fri, 3 Mar 2023 09:53:10 +0000 (15:23 +0530)]
cgroup: bpf: use cgroup_lock()/cgroup_unlock() wrappers
[ Upstream commit
4cdb91b0dea7d7f59fa84a13c7753cd434fdedcf ]
Replace mutex_[un]lock() with cgroup_[un]lock() wrappers to stay
consistent across cgroup core and other subsystem code, while
operating on the cgroup_mutex.
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Stable-dep-of:
2bd110339288 ("cgroup: always put cset in cgroup_css_set_put_fork")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mirsad Goran Todorovac [Tue, 9 May 2023 08:47:45 +0000 (10:47 +0200)]
test_firmware: prevent race conditions by a correct implementation of locking
[ Upstream commit
4acfe3dfde685a5a9eaec5555351918e2d7266a1 ]
Dan Carpenter spotted a race condition in a couple of situations like
these in the test_firmware driver:
static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
{
u8 val;
int ret;
ret = kstrtou8(buf, 10, &val);
if (ret)
return ret;
mutex_lock(&test_fw_mutex);
*(u8 *)cfg = val;
mutex_unlock(&test_fw_mutex);
/* Always return full write size even if we didn't consume all */
return size;
}
static ssize_t config_num_requests_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int rc;
mutex_lock(&test_fw_mutex);
if (test_fw_config->reqs) {
pr_err("Must call release_all_firmware prior to changing config\n");
rc = -EINVAL;
mutex_unlock(&test_fw_mutex);
goto out;
}
mutex_unlock(&test_fw_mutex);
rc = test_dev_config_update_u8(buf, count,
&test_fw_config->num_requests);
out:
return rc;
}
static ssize_t config_read_fw_idx_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return test_dev_config_update_u8(buf, count,
&test_fw_config->read_fw_idx);
}
The function test_dev_config_update_u8() is called from both the locked
and the unlocked context, function config_num_requests_store() and
config_read_fw_idx_store() which can both be called asynchronously as
they are driver's methods, while test_dev_config_update_u8() and siblings
change their argument pointed to by u8 *cfg or similar pointer.
To avoid deadlock on test_fw_mutex, the lock is dropped before calling
test_dev_config_update_u8() and re-acquired within test_dev_config_update_u8()
itself, but alas this creates a race condition.
Having two locks wouldn't assure a race-proof mutual exclusion.
This situation is best avoided by the introduction of a new, unlocked
function __test_dev_config_update_u8() which can be called from the locked
context and reducing test_dev_config_update_u8() to:
static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
{
int ret;
mutex_lock(&test_fw_mutex);
ret = __test_dev_config_update_u8(buf, size, cfg);
mutex_unlock(&test_fw_mutex);
return ret;
}
doing the locking and calling the unlocked primitive, which enables both
locked and unlocked versions without duplication of code.
The similar approach was applied to all functions called from the locked
and the unlocked context, which safely mitigates both deadlocks and race
conditions in the driver.
__test_dev_config_update_bool(), __test_dev_config_update_u8() and
__test_dev_config_update_size_t() unlocked versions of the functions
were introduced to be called from the locked contexts as a workaround
without releasing the main driver's lock and thereof causing a race
condition.
The test_dev_config_update_bool(), test_dev_config_update_u8() and
test_dev_config_update_size_t() locked versions of the functions
are being called from driver methods without the unnecessary multiplying
of the locking and unlocking code for each method, and complicating
the code with saving of the return value across lock.
Fixes:
7feebfa487b92 ("test_firmware: add support for request_firmware_into_buf")
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tianfei Zhang <tianfei.zhang@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org # v5.4
Suggested-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/r/20230509084746.48259-1-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 14 Jan 2023 09:22:03 +0000 (10:22 +0100)]
test_firmware: Use kstrtobool() instead of strtobool()
[ Upstream commit
f7d85515bd21902b218370a1a6301f76e4e636ff ]
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/34f04735d20e0138695dd4070651bd860a36b81c.1673688120.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of:
4acfe3dfde68 ("test_firmware: prevent race conditions by a correct implementation of locking")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Lendacky [Wed, 17 May 2023 16:26:41 +0000 (11:26 -0500)]
x86/head/64: Switch to KERNEL_CS as soon as new GDT is installed
[ Upstream commit
a37f2699c36a7f6606ba3300f243227856c5ad6b ]
The call to startup_64_setup_env() will install a new GDT but does not
actually switch to using the KERNEL_CS entry until returning from the
function call.
Commit
bcce82908333 ("x86/sev: Detect/setup SEV/SME features earlier in
boot") moved the call to sme_enable() earlier in the boot process and in
between the call to startup_64_setup_env() and the switch to KERNEL_CS.
An SEV-ES or an SEV-SNP guest will trigger #VC exceptions during the call
to sme_enable() and if the CS pushed on the stack as part of the exception
and used by IRETQ is not mapped by the new GDT, then problems occur.
Today, the current CS when entering startup_64 is the kernel CS value
because it was set up by the decompressor code, so no issue is seen.
However, a recent patchset that looked to avoid using the legacy
decompressor during an EFI boot exposed this bug. At entry to startup_64,
the CS value is that of EFI and is not mapped in the new kernel GDT. So
when a #VC exception occurs, the CS value used by IRETQ is not valid and
the guest boot crashes.
Fix this issue by moving the block that switches to the KERNEL_CS value to
be done immediately after returning from startup_64_setup_env().
Fixes:
bcce82908333 ("x86/sev: Detect/setup SEV/SME features earlier in boot")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/all/6ff1f28af2829cc9aea357ebee285825f90a431f.1684340801.git.thomas.lendacky%40amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Wed, 14 Jun 2023 09:15:34 +0000 (11:15 +0200)]
Linux 6.1.34
Link: https://lore.kernel.org/r/20230612101710.279705932@linuxfoundation.org
Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 12 Jun 2023 10:06:32 +0000 (12:06 +0200)]
Revert "staging: rtl8192e: Replace macro RTL_PCI_DEVICE with PCI_DEVICE"
This reverts commit
ec310591cf839653a5b2c1fcf6b8a110c3f2485c which is
commit
fda2093860df4812d69052a8cf4997e53853a340 upstream.
Ben reports that this should not have been backported to the older
kernels as the rest of the macro is not empty. It was a clean-up patch
in 6.4-rc1 only, it did not add new device ids.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Cc: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/aa0d401a7f63448cd4c2fe4a2d7e8495d9aa123e.camel@decadent.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ping-Ke Shih [Sat, 27 May 2023 08:29:37 +0000 (16:29 +0800)]
wifi: rtw88: correct PS calculation for SUPPORTS_DYNAMIC_PS
commit
3918dd0177ee08970683a2c22a3388825d82fd79 upstream.
This driver relies on IEEE80211_CONF_PS of hw->conf.flags to turn off PS or
turn on dynamic PS controlled by driver and firmware. Though this would be
incorrect, it did work before because the flag is always recalculated until
the commit
28977e790b5d ("wifi: mac80211: skip powersave recalc if driver SUPPORTS_DYNAMIC_PS")
is introduced by kernel 5.20 to skip to recalculate IEEE80211_CONF_PS
of hw->conf.flags if driver sets SUPPORTS_DYNAMIC_PS.
Correct this by doing recalculation while BSS_CHANGED_PS is changed and
interface is added or removed. It is allowed to enter PS only if single
one station vif is working. Without this fix, driver doesn't enter PS
anymore that causes higher power consumption.
Fixes:
bcde60e599fb ("rtw88: remove misleading module parameter rtw_fw_support_lps")
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230527082939.11206-2-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ping-Ke Shih [Sat, 27 May 2023 08:29:38 +0000 (16:29 +0800)]
wifi: rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS
commit
26a125f550a3bf86ac91d38752f4d446426dfe1c upstream.
This driver relies on IEEE80211_CONF_PS of hw->conf.flags to turn off PS or
turn on dynamic PS controlled by driver and firmware. Though this would be
incorrect, it did work before because the flag is always recalculated until
the commit
28977e790b5d ("wifi: mac80211: skip powersave recalc if driver SUPPORTS_DYNAMIC_PS")
is introduced by kernel 5.20 to skip to recalculate IEEE80211_CONF_PS
of hw->conf.flags if driver sets SUPPORTS_DYNAMIC_PS.
Correct this by doing recalculation while BSS_CHANGED_PS is changed and
interface is added or removed. For now, it is allowed to enter PS only if
single one station vif is working, and it could possible to have PS per
vif after firmware can support it. Without this fix, driver doesn't
enter PS anymore that causes higher power consumption.
Fixes:
e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230527082939.11206-3-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Thu, 8 Jun 2023 14:06:40 +0000 (10:06 -0400)]
ext4: only check dquot_initialize_needed() when debugging
commit
dea9d8f7643fab07bf89a1155f1f94f37d096a5e upstream.
ext4_xattr_block_set() relies on its caller to call dquot_initialize()
on the inode. To assure that this has happened there are WARN_ON
checks. Unfortunately, this is subject to false positives if there is
an antagonist thread which is flipping the file system at high rates
between r/o and rw. So only do the check if EXT4_XATTR_DEBUG is
enabled.
Link: https://lore.kernel.org/r/20230608044056.GA1418535@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Thu, 8 Jun 2023 13:57:04 +0000 (09:57 -0400)]
Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled"
commit
1b29243933098cdbc31b579b5616e183b4275e2f upstream.
This reverts commit
a44be64bbecb15a452496f60db6eacfee2b59c79.
Link: https://lore.kernel.org/r/653b3359-2005-21b1-039d-c55ca4cffdcc@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Tue, 30 May 2023 14:10:31 +0000 (23:10 +0900)]
ksmbd: check the validation of pdu_size in ksmbd_conn_handler_loop
commit
368ba06881c395f1c9a7ba22203cf8d78b4addc0 upstream.
The length field of netbios header must be greater than the SMB header
sizes(smb1 or smb2 header), otherwise the packet is an invalid SMB packet.
If `pdu_size` is 0, ksmbd allocates a 4 bytes chunk to `conn->request_buf`.
In the function `get_smb2_cmd_val` ksmbd will read cmd from
`rcv_hdr->Command`, which is `conn->request_buf + 12`, causing the KASAN
detector to print the following error message:
[ 7.205018] BUG: KASAN: slab-out-of-bounds in get_smb2_cmd_val+0x45/0x60
[ 7.205423] Read of size 2 at addr
ffff8880062d8b50 by task ksmbd:42632/248
...
[ 7.207125] <TASK>
[ 7.209191] get_smb2_cmd_val+0x45/0x60
[ 7.209426] ksmbd_conn_enqueue_request+0x3a/0x100
[ 7.209712] ksmbd_server_process_request+0x72/0x160
[ 7.210295] ksmbd_conn_handler_loop+0x30c/0x550
[ 7.212280] kthread+0x160/0x190
[ 7.212762] ret_from_fork+0x1f/0x30
[ 7.212981] </TASK>
Cc: stable@vger.kernel.org
Reported-by: Chih-Yen Chang <cc85nod@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Sat, 27 May 2023 15:23:41 +0000 (00:23 +0900)]
ksmbd: fix out-of-bound read in parse_lease_state()
commit
fc6c6a3c324c1b3e93a03d0cfa3749c781f23de0 upstream.
This bug is in parse_lease_state, and it is caused by the missing check
of `struct create_context`. When the ksmbd traverses the create_contexts,
it doesn't check if the field of `NameOffset` and `Next` is valid,
The KASAN message is following:
[ 6.664323] BUG: KASAN: slab-out-of-bounds in parse_lease_state+0x7d/0x280
[ 6.664738] Read of size 2 at addr
ffff888005c08988 by task kworker/0:3/103
...
[ 6.666644] Call Trace:
[ 6.666796] <TASK>
[ 6.666933] dump_stack_lvl+0x33/0x50
[ 6.667167] print_report+0xcc/0x620
[ 6.667903] kasan_report+0xae/0xe0
[ 6.668374] kasan_check_range+0x35/0x1b0
[ 6.668621] parse_lease_state+0x7d/0x280
[ 6.668868] smb2_open+0xbe8/0x4420
[ 6.675137] handle_ksmbd_work+0x282/0x820
Use smb2_find_context_vals() to find smb2 create request lease context.
smb2_find_context_vals validate create context fields.
Cc: stable@vger.kernel.org
Reported-by: Chih-Yen Chang <cc85nod@gmail.com>
Tested-by: Chih-Yen Chang <cc85nod@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Sat, 27 May 2023 15:23:09 +0000 (00:23 +0900)]
ksmbd: fix out-of-bound read in deassemble_neg_contexts()
commit
f1a411873c85b642f13b01f21b534c2bab81fc1b upstream.
The check in the beginning is
`clen + sizeof(struct smb2_neg_context) <= len_of_ctxts`,
but in the end of loop, `len_of_ctxts` will subtract
`((clen + 7) & ~0x7) + sizeof(struct smb2_neg_context)`, which causes
integer underflow when clen does the 8 alignment. We should use
`(clen + 7) & ~0x7` in the check to avoid underflow from happening.
Then there are some variables that need to be declared unsigned
instead of signed.
[ 11.671070] BUG: KASAN: slab-out-of-bounds in smb2_handle_negotiate+0x799/0x1610
[ 11.671533] Read of size 2 at addr
ffff888005e86cf2 by task kworker/0:0/7
...
[ 11.673383] Call Trace:
[ 11.673541] <TASK>
[ 11.673679] dump_stack_lvl+0x33/0x50
[ 11.673913] print_report+0xcc/0x620
[ 11.674671] kasan_report+0xae/0xe0
[ 11.675171] kasan_check_range+0x35/0x1b0
[ 11.675412] smb2_handle_negotiate+0x799/0x1610
[ 11.676217] ksmbd_smb_negotiate_common+0x526/0x770
[ 11.676795] handle_ksmbd_work+0x274/0x810
...
Cc: stable@vger.kernel.org
Signed-off-by: Chih-Yen Chang <cc85nod@gmail.com>
Tested-by: Chih-Yen Chang <cc85nod@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shannon Nelson [Mon, 24 Apr 2023 22:50:31 +0000 (15:50 -0700)]
vhost_vdpa: support PACKED when setting-getting vring_base
[ Upstream commit
beee7fdb5b56a46415a4992d28dd4c2d06eb52df ]
Use the right structs for PACKED or split vqs when setting and
getting the vring base.
Fixes:
4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <
20230424225031.18947-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shannon Nelson [Mon, 24 Apr 2023 22:50:30 +0000 (15:50 -0700)]
vhost: support PACKED when setting-getting vring_base
[ Upstream commit
55d8122f5cd62d5aaa225d7167dcd14a44c850b9 ]
Use the right structs for PACKED or split vqs when setting and
getting the vring base.
Fixes:
4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <
20230424225031.18947-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sheng Zhao [Tue, 30 May 2023 03:36:26 +0000 (11:36 +0800)]
vduse: avoid empty string for dev name
[ Upstream commit
a90e8608eb0ed93d31ac0feb055f77ce59512542 ]
Syzkaller hits a kernel WARN when the first character of the dev name
provided is NULL. Solution is to add a NULL check before calling
cdev_device_add() in vduse_create_dev().
kobject: (
0000000072042169): attempted to be registered with empty name!
WARNING: CPU: 0 PID: 112695 at lib/kobject.c:236
Call Trace:
kobject_add_varg linux/src/lib/kobject.c:390 [inline]
kobject_add+0xf6/0x150 linux/src/lib/kobject.c:442
device_add+0x28f/0xc20 linux/src/drivers/base/core.c:2167
cdev_device_add+0x83/0xc0 linux/src/fs/char_dev.c:546
vduse_create_dev linux/src/drivers/vdpa/vdpa_user/vduse_dev.c:2254 [inline]
vduse_ioctl+0x7b5/0xf30 linux/src/drivers/vdpa/vdpa_user/vduse_dev.c:2316
vfs_ioctl linux/src/fs/ioctl.c:47 [inline]
file_ioctl linux/src/fs/ioctl.c:510 [inline]
do_vfs_ioctl+0x14b/0xa80 linux/src/fs/ioctl.c:697
ksys_ioctl+0x7c/0xa0 linux/src/fs/ioctl.c:714
__do_sys_ioctl linux/src/fs/ioctl.c:721 [inline]
__se_sys_ioctl linux/src/fs/ioctl.c:719 [inline]
__x64_sys_ioctl+0x42/0x50 linux/src/fs/ioctl.c:719
do_syscall_64+0x94/0x330 linux/src/arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Cc: "Xie Yongji" <xieyongji@bytedance.com>
Reported-by: Xianjun Zeng <zengxianjun@bytedance.com>
Signed-off-by: Sheng Zhao <sheng.zhao@bytedance.com>
Message-Id: <
20230530033626.1266794-1-sheng.zhao@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Cc: "Michael S. Tsirkin"<mst@redhat.com>, "Jason Wang"<jasowang@redhat.com>,
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ruan Jinjie [Thu, 4 May 2023 07:29:10 +0000 (15:29 +0800)]
riscv: fix kprobe __user string arg print fault issue
[ Upstream commit
99a670b2069c725a7b50318aa681d9cae8f89325 ]
On riscv qemu platform, when add kprobe event on do_sys_open() to show
filename string arg, it just print fault as follow:
echo 'p:myprobe do_sys_open dfd=$arg1 filename=+0($arg2):string flags=$arg3
mode=$arg4' > kprobe_events
bash-166 [000] ...1. 360.195367: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6
bash-166 [000] ...1. 360.219369: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6
bash-191 [000] ...1. 360.378827: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x98800 mode=0x0
As riscv do not select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE,
the +0($arg2) addr is processed as a kernel address though it is a
userspace address, cause the above filename=(fault) print. So select
ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to avoid the issue, after that the
kprobe trace is ok as below:
bash-166 [000] ...1. 96.767641: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6
bash-166 [000] ...1. 96.793751: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6
bash-177 [000] ...1. 96.962354: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/sys/kernel/debug/tracing/events/kprobes/"
flags=0x98800 mode=0x0
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Fixes:
0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Link: https://lore.kernel.org/r/20230504072910.3742842-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Charles Keepax [Fri, 2 Jun 2023 10:11:36 +0000 (11:11 +0100)]
soundwire: stream: Add missing clear of alloc_slave_rt
[ Upstream commit
58d95889f3c2064c6139ee94bb0e4d86e1ad4eab ]
The current path that skips allocating the slave runtime does not clear
the alloc_slave_rt flag, this is clearly incorrect. Add the missing
clear, so the runtime won't be erroneously cleaned up.
Fixes:
f3016b891c8c ("soundwire: stream: sdw_stream_add_ functions can be called multiple times")
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230602101140.2040141-1-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Thu, 8 Jun 2023 02:54:24 +0000 (19:54 -0700)]
eeprom: at24: also select REGMAP
[ Upstream commit
7f3c782b3914e510b646a77aedc3adeac2e4a63b ]
Selecting only REGMAP_I2C can leave REGMAP unset, causing build errors,
so also select REGMAP to prevent the build errors.
../drivers/misc/eeprom/at24.c:540:42: warning: 'struct regmap_config' declared inside parameter list will not be visible outside of this definition or declaration
540 | struct regmap_config *regmap_config)
../drivers/misc/eeprom/at24.c: In function 'at24_make_dummy_client':
../drivers/misc/eeprom/at24.c:552:18: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration]
552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config);
../drivers/misc/eeprom/at24.c:552:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config);
../drivers/misc/eeprom/at24.c: In function 'at24_probe':
../drivers/misc/eeprom/at24.c:586:16: error: variable 'regmap_config' has initializer but incomplete type
586 | struct regmap_config regmap_config = { };
../drivers/misc/eeprom/at24.c:586:30: error: storage size of 'regmap_config' isn't known
586 | struct regmap_config regmap_config = { };
../drivers/misc/eeprom/at24.c:586:30: warning: unused variable 'regmap_config' [-Wunused-variable]
Fixes:
5c015258478e ("eeprom: at24: add basic regmap_i2c support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hsieh-Tseng Shen [Tue, 25 Apr 2023 10:28:28 +0000 (18:28 +0800)]
riscv: mm: Ensure prot of VM_WRITE and VM_EXEC must be readable
[ Upstream commit
6569fc12e442ea973d96db39e542aa19a7bc3a79 ]
Commit
8aeb7b17f04e ("RISC-V: Make mmap() with PROT_WRITE imply PROT_READ")
allows riscv to use mmap with PROT_WRITE only, and meanwhile mmap with w+x
is also permitted. However, when userspace tries to access this page with
PROT_WRITE|PROT_EXEC, which causes infinite loop at load page fault as
well as it triggers soft lockup. According to riscv privileged spec,
"Writable pages must also be marked readable". The fix to drop the
`PAGE_COPY_READ_EXEC` and then `PAGE_COPY_EXEC` would be just used instead.
This aligns the other arches (i.e arm64) for protection_map.
Fixes:
8aeb7b17f04e ("RISC-V: Make mmap() with PROT_WRITE imply PROT_READ")
Signed-off-by: Hsieh-Tseng Shen <woodrow.shen@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230425102828.1616812-1-woodrow.shen@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Thu, 9 Mar 2023 09:58:19 +0000 (10:58 +0100)]
i2c: sprd: Delete i2c adapter in .remove's error path
[ Upstream commit
ca0aa17f2db3468fd017038d23a78e17388e2f67 ]
If pm runtime resume fails the .remove callback used to exit early. This
resulted in an error message by the driver core but the device gets
removed anyhow. This lets the registered i2c adapter stay around with an
unbound parent device.
So only skip clk disabling if resume failed, but do delete the adapter.
Fixes:
8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kent Gibson [Tue, 6 Jun 2023 12:00:34 +0000 (20:00 +0800)]
gpio: sim: fix memory corruption when adding named lines and unnamed hogs
[ Upstream commit
95ae9979bfe3174c2ee8d64409c44532f2881907 ]
When constructing the sim, gpio-sim constructs an array of named lines,
sized based on the largest offset of any named line, and then initializes
that array with the names of all lines, including unnamed hogs with higher
offsets. In doing so it writes NULLs beyond the extent of the array.
Add a check that only named lines are used to initialize the array.
Fixes:
cb8c474e79be ("gpio: sim: new testing module")
Signed-off-by: Kent Gibson<warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Balint Dobszay [Thu, 1 Jun 2023 14:07:49 +0000 (16:07 +0200)]
firmware: arm_ffa: Set handle field to zero in memory descriptor
[ Upstream commit
3aa0519a4780f1b8e11966bd879d4a2934ba455f ]
As described in the commit
111a833dc5cb ("firmware: arm_ffa: Set
reserved/MBZ fields to zero in the memory descriptors") some fields in
the memory descriptor have to be zeroed explicitly. The handle field is
one of these, but it was left out from that change, fix this now.
Fixes:
111a833dc5cb ("firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors")
Reported-by: Imre Kis <imre.kis@arm.com>
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Link: https://lore.kernel.org/r/20230601140749.93812-1-balint.dobszay@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Behún [Sun, 21 May 2023 12:19:40 +0000 (14:19 +0200)]
i2c: mv64xxx: Fix reading invalid status value in atomic mode
[ Upstream commit
5578d0a79b6430fa1543640dd6f2d397d0886ce7 ]
There seems to be a bug within the mv64xxx I2C controller, wherein the
status register may not necessarily contain valid value immediately
after the IFLG flag is set in the control register.
My theory is that the controller:
- first sets the IFLG in control register
- then updates the status register
- then raises an interrupt
This may sometime cause weird bugs when in atomic mode, since in this
mode we do not wait for an interrupt, but instead we poll the control
register for IFLG and read status register immediately after.
I encountered -ENXIO from mv64xxx_i2c_fsm() due to this issue when using
this driver in atomic mode.
Note that I've only seen this issue on Armada 385, I don't know whether
other SOCs with this controller are also affected. Also note that this
fix has been in U-Boot for over 4 years [1] without anybody complaining,
so it should not cause regressions.
[1] https://source.denx.de/u-boot/u-boot/-/commit/
d50e29662f78
Fixes:
544a8d75f3d6 ("i2c: mv64xxx: Add atomic_xfer method to driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adam Ford [Sun, 28 May 2023 11:22:54 +0000 (06:22 -0500)]
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
[ Upstream commit
9bf2e534313fcf420367668cc1f30e10469901dc ]
The final production baseboard had a different chip select than
earlier prototype boards. When the newer board was released,
the SPI stopped working because the wrong pin was used in the device
tree and conflicted with the UART RTS. Fix the pinmux for
production boards.
Fixes:
36ca3c8ccb53 ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tian Lan [Sat, 13 May 2023 22:12:27 +0000 (18:12 -0400)]
blk-mq: fix blk_mq_hw_ctx active request accounting
[ Upstream commit
ddad59331a4e16088468ca0ad228a9fe32d7955a ]
The nr_active counter continues to increase over time which causes the
blk_mq_get_tag to hang until the thread is rescheduled to a different
core despite there are still tags available.
kernel-stack
INFO: task inboundIOReacto:3014879 blocked for more than 2 seconds
Not tainted 6.1.15-amd64 #1 Debian 6.1.15~debian11
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:inboundIOReacto state:D stack:0 pid:3014879 ppid:4557 flags:0x00000000
Call Trace:
<TASK>
__schedule+0x351/0xa20
scheduler+0x5d/0xe0
io_schedule+0x42/0x70
blk_mq_get_tag+0x11a/0x2a0
? dequeue_task_stop+0x70/0x70
__blk_mq_alloc_requests+0x191/0x2e0
kprobe output showing RQF_MQ_INFLIGHT bit is not cleared before
__blk_mq_free_request being called.
320 320 kworker/29:1H __blk_mq_free_request rq_flags 0x220c0 in-flight 1
b'__blk_mq_free_request+0x1 [kernel]'
b'bt_iter+0x50 [kernel]'
b'blk_mq_queue_tag_busy_iter+0x318 [kernel]'
b'blk_mq_timeout_work+0x7c [kernel]'
b'process_one_work+0x1c4 [kernel]'
b'worker_thread+0x4d [kernel]'
b'kthread+0xe6 [kernel]'
b'ret_from_fork+0x1f [kernel]'
Signed-off-by: Tian Lan <tian.lan@twosigma.com>
Fixes:
2e315dc07df0 ("blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230513221227.497327-1-tilan7663@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert Hancock [Fri, 2 Jun 2023 01:19:35 +0000 (19:19 -0600)]
ASoC: simple-card-utils: fix PCM constraint error check
[ Upstream commit
635071f5fee31550e921644b2becc42b3ff1036c ]
The code in asoc_simple_startup was treating any non-zero return from
snd_pcm_hw_constraint_minmax as an error, when this can return 1 in some
normal cases and only negative values indicate an error.
When this happened, it caused asoc_simple_startup to disable the clocks
it just enabled and return 1, which was not treated as an error by the
calling code which only checks for negative return values. Then when the
PCM is eventually shut down, it causes the clock framework to complain
about disabling clocks that were not enabled.
Fix the check for snd_pcm_hw_constraint_minmax return value to only
treat negative values as an error.
Fixes:
5ca2ab459817 ("ASoC: simple-card-utils: Add new system-clock-fixed flag")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20230602011936.231931-1-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trevor Wu [Thu, 1 Jun 2023 03:33:18 +0000 (11:33 +0800)]
ASoC: mediatek: mt8195: fix use-after-free in driver remove path
[ Upstream commit
dc93f0dcb436dfd24a06c5b3c0f4c5cd9296e8e5 ]
During mt8195_afe_init_clock(), mt8195_audsys_clk_register() was called
followed by several other devm functions. At mt8195_afe_deinit_clock()
located at mt8195_afe_pcm_dev_remove(), mt8195_audsys_clk_unregister()
was called.
However, there was an issue with the order in which these functions were
called. Specifically, the remove callback of platform_driver was called
before devres released the resource, resulting in a use-after-free issue
during remove time.
At probe time, the order of calls was:
1. mt8195_audsys_clk_register
2. afe_priv->clk = devm_kcalloc
3. afe_priv->clk[i] = devm_clk_get
At remove time, the order of calls was:
1. mt8195_audsys_clk_unregister
3. free afe_priv->clk[i]
2. free afe_priv->clk
To resolve the problem, we can utilize devm_add_action_or_reset() in
mt8195_audsys_clk_register() so that the remove order can be changed to
3->2->1.
Fixes:
6746cc858259 ("ASoC: mediatek: mt8195: add platform driver")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230601033318.10408-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Wed, 15 Mar 2023 15:06:45 +0000 (16:06 +0100)]
ASoC: mediatek: mt8195-afe-pcm: Convert to platform remove callback returning void
[ Upstream commit
6461fee68064ba970e3ba90241fe5f5e038aa9d4 ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-114-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of:
dc93f0dcb436 ("ASoC: mediatek: mt8195: fix use-after-free in driver remove path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shenwei Wang [Fri, 26 May 2023 15:38:54 +0000 (10:38 -0500)]
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
[ Upstream commit
ca50d7765587fe0a8351a6e8d9742cfd4811d925 ]
Add the assigned-clocks and assigned-clock-rates properties for the
LPUARTx nodes. Without these properties, the default clock rate
used would be 0, which can cause the UART ports to fail when open.
Fixes:
35f4e9d7530f ("arm64: dts: imx8: split adma ss into dma and audio ss")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shenwei Wang [Thu, 18 May 2023 13:54:21 +0000 (08:54 -0500)]
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
[ Upstream commit
2b28fc688cdff225c41cdd22857500e187453ed7 ]
The USDHC2 CD and WP sginal should be on LSIO_GPIO5.
Fixes:
307fd14d4b14 ("arm64: dts: imx: add imx8qm mek support")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Tue, 16 May 2023 00:19:29 +0000 (17:19 -0700)]
arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
[ Upstream commit
3a735530c159b75e1402c08abe1ba4eb99a1f7a3 ]
In general, the three SKUs of sc7180 (lite, normal, and pro) are
handled dynamically.
The cpufreq table in sc7180.dtsi includes the superset of all CPU
frequencies. The "qcom-cpufreq-hw" driver in Linux shows that we can
dynamically detect which frequencies are actually available on the
currently running CPU and then we can just enable those ones.
The GPU is similarly dynamic. The nvmem has a fuse in it (see
"gpu_speed_bin" in sc7180.dtsi) that the GPU driver can use to figure
out which frequencies to enable.
There is one part, however, that is not so dynamic. The way SDRAM
frequency works in sc7180 is that it's tied to cpufreq. At the busiest
cpufreq operating points we'll pick the top supported SDRAM frequency.
They ramp down together.
For the "pro" SKU of sc7180, we only enable one extra cpufreq step.
That extra cpufreq step runs SDRAM at the same speed as the step
below. Thus, for normal and pro things are OK. There is no sc7180-pro
device tree snippet.
For the "lite" SKU if sc7180, however, things aren't so easy. The
"lite" SKU drops 3 cpufreq entries but can still run SDRAM at max
frequency. That messed things up with the whole scheme. This is why we
added the "sc7180-lite" fragment in commit
8fd01e01fd6f ("arm64: dts:
qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite").
When the lite scheme came about, it was agreed that the WiFi SKUs of
lazor would _always_ be "lite" and would, in fact, be the only "lite"
devices. Unfortunately, this decision changed and folks didn't realize
that it would be a problem. Specifically, some later lazor WiFi-only
devices were built with "pro" CPUs.
Building WiFi-only lazor with "pro" CPUs isn't the end of the world.
The SDRAM will ramp up a little sooner than it otherwise would, but
aside from a small power hit things work OK. One problem, though, is
that the SDRAM scaling becomes a bit quirky. Specifically, with the
current tables we'll max out SDRAM frequency at 2.1GHz but then
_lower_ it at 2.2GHz / 2.3GHz only to raise it back to max for 2.4GHz
and 2.55GHz.
Let's at least fix this so that the SDRAM frequency doesn't go down in
that quirky way. On true "lite" SKUs this change will be a no-op
because the operating points we're touching are disabled. This change
is only useful when a board that thinks it has a "lite" CPU actually
has a "normal" or "pro" one stuffed.
Fixes:
8fd01e01fd6f ("arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515171929.1.Ic8dee2cb79ce39ffc04eab2a344dde47b2f9459f@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>