Russell King [Mon, 25 Feb 2013 16:10:42 +0000 (16:10 +0000)]
ARM: fix scheduling while atomic warning in alignment handling code
Paolo Pisati reports that IPv6 triggers this warning:
BUG: scheduling while atomic: swapper/0/0/0x40000100
Modules linked in:
[<
c001b1c4>] (unwind_backtrace+0x0/0xf0) from [<
c0503c5c>] (__schedule_bug+0x48/0x5c)
[<
c0503c5c>] (__schedule_bug+0x48/0x5c) from [<
c0508608>] (__schedule+0x700/0x740)
[<
c0508608>] (__schedule+0x700/0x740) from [<
c007007c>] (__cond_resched+0x24/0x34)
[<
c007007c>] (__cond_resched+0x24/0x34) from [<
c05086dc>] (_cond_resched+0x3c/0x44)
[<
c05086dc>] (_cond_resched+0x3c/0x44) from [<
c0021f6c>] (do_alignment+0x178/0x78c)
[<
c0021f6c>] (do_alignment+0x178/0x78c) from [<
c00083e0>] (do_DataAbort+0x34/0x98)
[<
c00083e0>] (do_DataAbort+0x34/0x98) from [<
c0509a60>] (__dabt_svc+0x40/0x60)
Exception stack(0xc0763d70 to 0xc0763db8)
3d60:
e97e805e e97e806e 2c000000 11000000
3d80:
ea86bb00 0000002c 00000011 e97e807e c076d2a8 e97e805e e97e806e 0000002c
3da0:
3d000000 c0763dbc c04b98fc c02a8490 00000113 ffffffff
[<
c0509a60>] (__dabt_svc+0x40/0x60) from [<
c02a8490>] (__csum_ipv6_magic+0x8/0xc8)
Fix this by using probe_kernel_address() stead of __get_user().
Cc: <stable@vger.kernel.org>
Reported-by: Paolo Pisati <p.pisati@gmail.com>
Tested-by: Paolo Pisati <p.pisati@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Mon, 25 Feb 2013 16:09:12 +0000 (16:09 +0000)]
ARM: VFP: fix emulation of second VFP instruction
Martin Storsjö reports that the sequence:
ee312ac1 vsub.f32 s4, s3, s2
ee702ac0 vsub.f32 s5, s1, s0
e59f0028 ldr r0, [pc, #40]
ee111a90 vmov r1, s3
on Raspberry Pi (implementor 41 architecture 1 part 20 variant b rev 5)
where s3 is a denormal and s2 is zero results in incorrect behaviour -
the instruction "vsub.f32 s5, s1, s0" is not executed:
VFP: bounce: trigger
ee111a90 fpexc
d0000780
VFP: emulate: INST=0xee312ac1 SCR=0x00000000
...
As we can see, the instruction triggering the exception is the "vmov"
instruction, and we emulate the "vsub.f32 s4, s3, s2" but fail to
properly take account of the FPEXC_FP2V flag in FPEXC. This is because
the test for the second instruction register being valid is bogus, and
will always skip emulation of the second instruction.
Cc: <stable@vger.kernel.org>
Reported-by: Martin Storsjö <martin@martin.st>
Tested-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Olof Johansson [Sat, 23 Feb 2013 07:02:24 +0000 (08:02 +0100)]
ARM: 7656/1: uImage: Error out on build of multiplatform without LOADADDR
On multiplatform kernels, $MACHINE will be empty so there will be no
default LOADADDR. Fail to build the uImage target unless one is provided by the
developer at build time.
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Hiroshi Doyu [Wed, 6 Feb 2013 19:12:35 +0000 (20:12 +0100)]
ARM: 7640/1: memory: tegra_ahb_enable_smmu() depends on TEGRA_IOMMU_SMMU
New SoC, Tegra114 also uses SMMU. Change tegra_ahb_enable_smmu()'s
dependency from ARCH_TEGRA_3x_SOC to TEGRA_IOMMU_SMMU. No need to edit
whenever a new Tegra SoC comes.
The following combination caused build error, which this patch fixes.
CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_114_SOC=y
drivers/iommu/tegra-smmu.c:485: undefined reference to gra_ahb_enable_smmu'
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Mon, 18 Feb 2013 16:51:20 +0000 (17:51 +0100)]
ARM: 7654/1: Preserve L_PTE_VALID in pte_modify()
Following commit
26ffd0d4 (ARM: mm: introduce present, faulting entries
for PAGE_NONE), if a page has been mapped as PROT_NONE, the L_PTE_VALID
bit is cleared by the set_pte_ext() code. With LPAE the software and
hardware pte share the same location and subsequent modifications of pte
range (change_protection()) will leave the L_PTE_VALID bit cleared.
This patch adds the L_PTE_VALID bit to the newprot mask in pte_modify().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Subash Patel <subash.rp@samsung.com>
Tested-by: Subash Patel <subash.rp@samsung.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 3.8.x
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Nicolas Pitre [Mon, 18 Feb 2013 15:36:13 +0000 (16:36 +0100)]
ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock
When udelay() is implemented using an architected timer, it is wrong
to scale loops_per_jiffy when changing the CPU clock frequency since
the timer clock remains constant.
The lpj should probably become an implementation detail relevant to
the CPU loop based delay routine only and more confined to it. In the
mean time this is the minimal fix needed to have expected delays with
the timer based implementation when cpufreq is also in use.
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Joonsoo Kim [Sat, 9 Feb 2013 04:52:45 +0000 (05:52 +0100)]
ARM: 7643/1: sched: correct update_sched_clock()
If we want load epoch_cyc and epoch_ns atomically,
we should update epoch_cyc_copy first of all.
This notify reader that updating is in progress.
If we update epoch_cyc first like as current implementation,
there is subtle error case.
Look at the below example.
<Initial Condition>
cyc = 9
ns = 900
cyc_copy = 9
== CASE 1 ==
<CPU A = reader> <CPU B = updater>
write cyc = 10
read cyc = 10
read ns = 900
write ns = 1000
write cyc_copy = 10
read cyc_copy = 10
output = (10, 900)
== CASE 2 ==
<CPU A = reader> <CPU B = updater>
read cyc = 9
write cyc = 10
write ns = 1000
read ns = 1000
read cyc_copy = 9
write cyc_copy = 10
output = (9, 1000)
If atomic read is ensured, output should be (9, 900) or (10, 1000).
But, output in example case are not.
So, change updating sequence in order to correct this problem.
Cc: <stable@vger.kernel.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Fri, 8 Feb 2013 21:20:39 +0000 (08:20 +1100)]
Linux 3.8-rc7
Linus Torvalds [Fri, 8 Feb 2013 21:01:18 +0000 (08:01 +1100)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
"I was going to hold these off until v3.8 was out, and send them with a
stable tag, but as everyone else is pushing much bigger fixes which
Linus is accepting, let's save people from the hastle of having to
patch v3.8 back into working or use a stable kernel.
Looking at the diffstat, this really is high value for its size; this
is miniscule compared to how the -rc6 to tip diffstat currently looks.
So, four patches in this set:
- Punit Agrawal reports that the kernel no longer boots on MPCore due
to a new assumption made in the GIC code which isn't true of
earlier GIC designs. This is the biggest change in this set.
- Punit's boot log also revealed a bunch of WARN_ON() dumps caused by
the DT-ification of the GIC support without fixing up non-DT
Realview - which now sees a greater number of interrupts than it
did before.
- A fix for the DMA coherent code from Marek which uses the wrong
check for atomic allocations; this can result in spinlock lockups
or other nasty effects.
- A fix from Will, which will affect all Android based platforms if
not applied (which use the 2G:2G VM split) - this causes
particularly 'make' to misbehave unless this bug is fixed."
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
ARM: DMA mapping: fix bad atomic test
ARM: realview: ensure that we have sufficient IRQs available
ARM: GIC: fix GIC cpumask initialization
Linus Torvalds [Fri, 8 Feb 2013 20:55:24 +0000 (07:55 +1100)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Revert iwlwifi reclaimed packet tracking, it causes problems for a
bunch of folks. From Emmanuel Grumbach.
2) Work limiting code in brcmsmac wifi driver can clear tx status
without processing the event. From Arend van Spriel.
3) rtlwifi USB driver processes wrong SKB, fix from Larry Finger.
4) l2tp tunnel delete can race with close, fix from Tom Parkin.
5) pktgen_add_device() failures are not checked at all, fix from Cong
Wang.
6) Fix unintentional removal of carrier off from tun_detach(),
otherwise we confuse userspace, from Michael S. Tsirkin.
7) Don't leak socket reference counts and ubufs in vhost-net driver,
from Jason Wang.
8) vmxnet3 driver gets it's initial carrier state wrong, fix from Neil
Horman.
9) Protect against USB networking devices which spam the host with 0
length frames, from Bjørn Mork.
10) Prevent neighbour overflows in ipv6 for locally destined routes,
from Marcelo Ricardo. This is the best short-term fix for this, a
longer term fix has been implemented in net-next.
11) L2TP uses ipv4 datagram routines in it's ipv6 code, whoops. This
mistake is largely because the ipv6 functions don't even have some
kind of prefix in their names to suggest they are ipv6 specific.
From Tom Parkin.
12) Check SYN packet drops properly in tcp_rcv_fastopen_synack(), from
Yuchung Cheng.
13) Fix races and TX skb freeing bugs in via-rhine's NAPI support, from
Francois Romieu and your's truly.
14) Fix infinite loops and divides by zero in TCP congestion window
handling, from Eric Dumazet, Neal Cardwell, and Ilpo Järvinen.
15) AF_PACKET tx ring handling can leak kernel memory to userspace, fix
from Phil Sutter.
16) Fix error handling in ipv6 GRE tunnel transmit, from Tommi Rantala.
17) Protect XEN netback driver against hostile frontend putting garbage
into the rings, don't leak pages in TX GOP checking, and add proper
resource releasing in error path of xen_netbk_get_requests(). From
Ian Campbell.
18) SCTP authentication keys should be cleared out and released with
kzfree(), from Daniel Borkmann.
19) L2TP is a bit too clever trying to maintain skb->truesize, and ends
up corrupting socket memory accounting to the point where packet
sending is halted indefinitely. Just remove the adjustments
entirely, they aren't really needed. From Eric Dumazet.
20) ATM Iphase driver uses a data type with the same name as the S390
headers, rename to fix the build. From Heiko Carstens.
21) Fix a typo in copying the inner network header offset from one SKB
to another, from Pravin B Shelar.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
net: sctp: sctp_endpoint_free: zero out secret key data
net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
atm/iphase: rename fregt_t -> ffreg_t
net: usb: fix regression from FLAG_NOARP code
l2tp: dont play with skb->truesize
net: sctp: sctp_auth_key_put: use kzfree instead of kfree
netback: correct netbk_tx_err to handle wrap around.
xen/netback: free already allocated memory on failure in xen_netbk_get_requests
xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
xen/netback: shutdown the ring if it contains garbage.
net: qmi_wwan: add more Huawei devices, including E320
net: cdc_ncm: add another Huawei vendor specific device
ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
tcp: fix for zero packets_in_flight was too broad
brcmsmac: rework of mac80211 .flush() callback operation
ssb: unregister gpios before unloading ssb
bcma: unregister gpios before unloading bcma
rtlwifi: Fix scheduling while atomic bug
net: usbnet: fix tx_dropped statistics
tcp: ipv6: Update MIB counters for drops
...
David S. Miller [Fri, 8 Feb 2013 19:55:08 +0000 (14:55 -0500)]
Merge branch 'sctp_keys'
Daniel Borkmann says:
====================
Cryptographically used keys should be zeroed out when our session
ends resp. memory is freed, thus do not leave them somewhere in the
memory.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 8 Feb 2013 03:04:35 +0000 (03:04 +0000)]
net: sctp: sctp_endpoint_free: zero out secret key data
On sctp_endpoint_destroy, previously used sensitive keying material
should be zeroed out before the memory is returned, as we already do
with e.g. auth keys when released.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 8 Feb 2013 03:04:34 +0000 (03:04 +0000)]
net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
In sctp_setsockopt_auth_key, we create a temporary copy of the user
passed shared auth key for the endpoint or association and after
internal setup, we free it right away. Since it's sensitive data, we
should zero out the key before returning the memory back to the
allocator. Thus, use kzfree instead of kfree, just as we do in
sctp_auth_key_put().
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiko Carstens [Fri, 8 Feb 2013 00:19:11 +0000 (00:19 +0000)]
atm/iphase: rename fregt_t -> ffreg_t
We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the
iphase atm device driver, which causes the compile error below.
Unfortunately the s390 typedef can't be renamed, since it's a user visible api,
nor can I change the include order in s390 code to avoid the conflict.
So simply rename the iphase typedef to a new name. Fixes this compile error:
In file included from drivers/atm/iphase.c:66:0:
drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t'
In file included from next/arch/s390/include/asm/ptrace.h:9:0,
from next/arch/s390/include/asm/lowcore.h:12,
from next/arch/s390/include/asm/thread_info.h:30,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from include/linux/seqlock.h:29,
from include/linux/time.h:5,
from include/linux/stat.h:18,
from include/linux/module.h:10,
from drivers/atm/iphase.c:43:
next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
Will Deacon [Fri, 8 Feb 2013 11:52:29 +0000 (12:52 +0100)]
ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
We have received multiple reports of mmap failures when running with a
2:2 vm split. These manifest as either -EINVAL with a non page-aligned
address (ending 0xaaa) or a SEGV, depending on the application. The
issue is commonly observed in children of make, which appears to use
bottom-up mmap (assumedly because it changes the stack rlimit).
Further investigation reveals that this regression was triggered by
394ef6403abc ("mm: use vm_unmapped_area() on arm architecture"), whereby
TASK_UNMAPPED_BASE is no longer page-aligned for bottom-up mmap, causing
get_unmapped_area to choke on misaligned addressed.
This patch fixes the problem by defining TASK_UNMAPPED_BASE in terms of
TASK_SIZE and explicitly aligns the result to 16M, matching the other
end of the heap.
Acked-by: Nicolas Pitre <nico@linaro.org>
Reported-by: Steve Capper <steve.capper@arm.com>
Reported-by: Jean-Francois Moine <moinejf@free.fr>
Reported-by: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Wed, 30 Jan 2013 23:55:35 +0000 (23:55 +0000)]
ARM: DMA mapping: fix bad atomic test
Realview fails to boot with this warning:
BUG: spinlock lockup suspected on CPU#0, init/1
lock: 0xcf8bde10, .magic:
dead4ead, .owner: init/1, .owner_cpu: 0
Backtrace:
[<
c00185d8>] (dump_backtrace+0x0/0x10c) from [<
c03294e8>] (dump_stack+0x18/0x1c) r6:
cf8bde10 r5:
cf83d1c0 r4:
cf8bde10 r3:
cf83d1c0
[<
c03294d0>] (dump_stack+0x0/0x1c) from [<
c018926c>] (spin_dump+0x84/0x98)
[<
c01891e8>] (spin_dump+0x0/0x98) from [<
c0189460>] (do_raw_spin_lock+0x100/0x198)
[<
c0189360>] (do_raw_spin_lock+0x0/0x198) from [<
c032cbac>] (_raw_spin_lock+0x3c/0x44)
[<
c032cb70>] (_raw_spin_lock+0x0/0x44) from [<
c01c9224>] (pl011_console_write+0xe8/0x11c)
[<
c01c913c>] (pl011_console_write+0x0/0x11c) from [<
c002aea8>] (call_console_drivers.clone.7+0xdc/0x104)
[<
c002adcc>] (call_console_drivers.clone.7+0x0/0x104) from [<
c002b320>] (console_unlock+0x2e8/0x454)
[<
c002b038>] (console_unlock+0x0/0x454) from [<
c002b8b4>] (vprintk_emit+0x2d8/0x594)
[<
c002b5dc>] (vprintk_emit+0x0/0x594) from [<
c0329718>] (printk+0x3c/0x44)
[<
c03296dc>] (printk+0x0/0x44) from [<
c002929c>] (warn_slowpath_common+0x28/0x6c)
[<
c0029274>] (warn_slowpath_common+0x0/0x6c) from [<
c0029304>] (warn_slowpath_null+0x24/0x2c)
[<
c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<
c0070ab0>] (lockdep_trace_alloc+0xd8/0xf0)
[<
c00709d8>] (lockdep_trace_alloc+0x0/0xf0) from [<
c00c0850>] (kmem_cache_alloc+0x24/0x11c)
[<
c00c082c>] (kmem_cache_alloc+0x0/0x11c) from [<
c00bb044>] (__get_vm_area_node.clone.24+0x7c/0x16c)
[<
c00bafc8>] (__get_vm_area_node.clone.24+0x0/0x16c) from [<
c00bb7b8>] (get_vm_area_caller+0x48/0x54)
[<
c00bb770>] (get_vm_area_caller+0x0/0x54) from [<
c0020064>] (__alloc_remap_buffer.clone.15+0x38/0xb8)
[<
c002002c>] (__alloc_remap_buffer.clone.15+0x0/0xb8) from [<
c0020244>] (__dma_alloc+0x160/0x2c8)
[<
c00200e4>] (__dma_alloc+0x0/0x2c8) from [<
c00204d8>] (arm_dma_alloc+0x88/0xa0)[<
c0020450>] (arm_dma_alloc+0x0/0xa0) from [<
c00beb00>] (dma_pool_alloc+0xcc/0x1a8)
[<
c00bea34>] (dma_pool_alloc+0x0/0x1a8) from [<
c01a9d14>] (pl08x_fill_llis_for_desc+0x28/0x568)
[<
c01a9cec>] (pl08x_fill_llis_for_desc+0x0/0x568) from [<
c01aab8c>] (pl08x_prep_slave_sg+0x258/0x3b0)
[<
c01aa934>] (pl08x_prep_slave_sg+0x0/0x3b0) from [<
c01c9f74>] (pl011_dma_tx_refill+0x140/0x288)
[<
c01c9e34>] (pl011_dma_tx_refill+0x0/0x288) from [<
c01ca748>] (pl011_start_tx+0xe4/0x120)
[<
c01ca664>] (pl011_start_tx+0x0/0x120) from [<
c01c54a4>] (__uart_start+0x48/0x4c)
[<
c01c545c>] (__uart_start+0x0/0x4c) from [<
c01c632c>] (uart_start+0x2c/0x3c)
[<
c01c6300>] (uart_start+0x0/0x3c) from [<
c01c795c>] (uart_write+0xcc/0xf4)
[<
c01c7890>] (uart_write+0x0/0xf4) from [<
c01b0384>] (n_tty_write+0x1c0/0x3e4)
[<
c01b01c4>] (n_tty_write+0x0/0x3e4) from [<
c01acfe8>] (tty_write+0x144/0x240)
[<
c01acea4>] (tty_write+0x0/0x240) from [<
c01ad17c>] (redirected_tty_write+0x98/0xac)
[<
c01ad0e4>] (redirected_tty_write+0x0/0xac) from [<
c00c371c>] (vfs_write+0xbc/0x150)
[<
c00c3660>] (vfs_write+0x0/0x150) from [<
c00c39c0>] (sys_write+0x4c/0x78)
[<
c00c3974>] (sys_write+0x0/0x78) from [<
c0014460>] (ret_fast_syscall+0x0/0x3c)
This happens because the DMA allocation code is not respecting atomic
allocations correctly.
GFP flags should not be tested for GFP_ATOMIC to determine if an
atomic allocation is being requested. GFP_ATOMIC is not a flag but
a value. The GFP bitmask flags are all prefixed with __GFP_.
The rest of the kernel tests for __GFP_WAIT not being set to indicate
an atomic allocation. We need to do the same.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Wed, 30 Jan 2013 23:54:26 +0000 (23:54 +0000)]
ARM: realview: ensure that we have sufficient IRQs available
Realview EB with a rev B MPcore tile results in lots of warnings at
boot because it can't allocate enough IRQs. Fix this by increasing
the number of available IRQs.
WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:757 gic_init_bases+0x12c/0x2ec()
Cannot allocate irq_descs @ IRQ96, assuming pre-allocated
Modules linked in:
Backtrace:
[<
c00185d8>] (dump_backtrace+0x0/0x10c) from [<
c03294e8>] (dump_stack+0x18/0x1c) r6:
000002f5 r5:
c042c62c r4:
c044ff40 r3:
c045f240
[<
c03294d0>] (dump_stack+0x0/0x1c) from [<
c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<
c0029274>] (warn_slowpath_common+0x0/0x6c) from [<
c0029384>] (warn_slowpath_fmt+0x38/0x40)
[<
c002934c>] (warn_slowpath_fmt+0x0/0x40) from [<
c042c62c>] (gic_init_bases+0x12c/0x2ec)
[<
c042c500>] (gic_init_bases+0x0/0x2ec) from [<
c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<
c042cd3c>] (gic_init_irq+0x0/0xd8) from [<
c042827c>] (init_IRQ+0x1c/0x24)
[<
c0428260>] (init_IRQ+0x0/0x24) from [<
c04256c8>] (start_kernel+0x1a4/0x300)
[<
c0425524>] (start_kernel+0x0/0x300) from [<
70008070>] (0x70008070)
---[ end trace
1b75b31a2719ed1c ]---
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-rmk/kernel/irq/irqdomain.c:234 irq_domain_add_legacy+0x80/0x140()
Modules linked in:
Backtrace:
[<
c00185d8>] (dump_backtrace+0x0/0x10c) from [<
c03294e8>] (dump_stack+0x18/0x1c) r6:
000000ea r5:
c0081a38 r4:
00000000 r3:
c045f240
[<
c03294d0>] (dump_stack+0x0/0x1c) from [<
c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<
c0029274>] (warn_slowpath_common+0x0/0x6c) from [<
c0029304>] (warn_slowpath_null+0x24/0x2c)
[<
c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<
c0081a38>] (irq_domain_add_legacy+0x80/0x140)
[<
c00819b8>] (irq_domain_add_legacy+0x0/0x140) from [<
c042c64c>] (gic_init_bases+0x14c/0x2ec)
[<
c042c500>] (gic_init_bases+0x0/0x2ec) from [<
c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<
c042cd3c>] (gic_init_irq+0x0/0xd8) from [<
c042827c>] (init_IRQ+0x1c/0x24)
[<
c0428260>] (init_IRQ+0x0/0x24) from [<
c04256c8>] (start_kernel+0x1a4/0x300)
[<
c0425524>] (start_kernel+0x0/0x300) from [<
70008070>] (0x70008070)
---[ end trace
1b75b31a2719ed1d ]---
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:762 gic_init_bases+0x170/0x2ec()
Modules linked in:
Backtrace:
[<
c00185d8>] (dump_backtrace+0x0/0x10c) from [<
c03294e8>] (dump_stack+0x18/0x1c) r6:
000002fa r5:
c042c670 r4:
00000000 r3:
c045f240
[<
c03294d0>] (dump_stack+0x0/0x1c) from [<
c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<
c0029274>] (warn_slowpath_common+0x0/0x6c) from [<
c0029304>] (warn_slowpath_null+0x24/0x2c)
[<
c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<
c042c670>] (gic_init_bases+0x170/0x2ec)
[<
c042c500>] (gic_init_bases+0x0/0x2ec) from [<
c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<
c042cd3c>] (gic_init_irq+0x0/0xd8) from [<
c042827c>] (init_IRQ+0x1c/0x24)
[<
c0428260>] (init_IRQ+0x0/0x24) from [<
c04256c8>] (start_kernel+0x1a4/0x300)
[<
c0425524>] (start_kernel+0x0/0x300) from [<
70008070>] (0x70008070)
---[ end trace
1b75b31a2719ed1e ]---
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Wed, 30 Jan 2013 23:49:57 +0000 (23:49 +0000)]
ARM: GIC: fix GIC cpumask initialization
Punit Agrawal reports:
> I was trying to boot 3.8-rc5 on Realview EB 11MPCore using
> realview-smp_defconfig as a starting point but the kernel failed to
> progress past the log below (config attached).
>
> Pawel suggested I try reverting
384a290283f - "ARM: gic: use a private
> mapping for CPU target interfaces" that you've authored. With this
> commit reverted the kernel boots.
>
> I am not quite sure why the commit breaks 11MPCore but Pawel (cc'd)
> might be able to shed light on that.
Some early GIC implementations return zero for the first distributor
CPU routing register. This means we can't rely on that telling us
which CPU interface we're connected to. We know that these platforms
implement PPIs for IRQs 29-31 - but we shouldn't assume that these
will always be populated.
So, instead, scan for a non-zero CPU routing register in the first
32 IRQs and use that as our CPU mask.
Reported-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Fri, 8 Feb 2013 08:46:26 +0000 (19:46 +1100)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm regression fix from Dave Airlie:
"This one fixes a sleep while locked regression that was introduced
earlier in 3.8."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try
Lucas Stach [Thu, 7 Feb 2013 16:18:39 +0000 (16:18 +0000)]
net: usb: fix regression from FLAG_NOARP code
In commit
6509141f9c2ba74df6cc72ec35cd1865276ae3a4 ("usbnet: add new
flag FLAG_NOARP for usb net devices"), the newly added flag NOARP was
using an already defined value, which broke drivers using flag
MULTI_PACKET.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 7 Feb 2013 14:00:34 +0000 (14:00 +0000)]
l2tp: dont play with skb->truesize
Andrew Savchenko reported a DNS failure and we diagnosed that
some UDP sockets were unable to send more packets because their
sk_wmem_alloc was corrupted after a while (tx_queue column in
following trace)
$ cat /proc/net/udp
sl local_address rem_address st tx_queue rx_queue tr tm->when retrnsmt uid timeout inode ref pointer drops
...
459:
00000000:0270
00000000:0000 07
00000000:
00000000 00:
00000000 00000000 0 0 4507 2
ffff88003d612380 0
466:
00000000:0277
00000000:0000 07
00000000:
00000000 00:
00000000 00000000 0 0 4802 2
ffff88003d613180 0
470:
076A070A:007B
00000000:0000 07
FFFF4600:
00000000 00:
00000000 00000000 123 0 5552 2
ffff880039974380 0
470:
010213AC:007B
00000000:0000 07
00000000:
00000000 00:
00000000 00000000 0 0 4986 2
ffff88003dbd3180 0
470:
010013AC:007B
00000000:0000 07
00000000:
00000000 00:
00000000 00000000 0 0 4985 2
ffff88003dbd2e00 0
470:
00FCA8C0:007B
00000000:0000 07
FFFFFB00:
00000000 00:
00000000 00000000 0 0 4984 2
ffff88003dbd2a80 0
...
Playing with skb->truesize is tricky, especially when
skb is attached to a socket, as we can fool memory charging.
Just remove this code, its not worth trying to be ultra
precise in xmit path.
Reported-by: Andrew Savchenko <bircoph@gmail.com>
Tested-by: Andrew Savchenko <bircoph@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Thu, 7 Feb 2013 00:55:37 +0000 (00:55 +0000)]
net: sctp: sctp_auth_key_put: use kzfree instead of kfree
For sensitive data like keying material, it is common practice to zero
out keys before returning the memory back to the allocator. Thus, use
kzfree instead of kfree.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 8 Feb 2013 04:37:36 +0000 (23:37 -0500)]
Merge branch 'fixes' of git://git./linux/kernel/git/jesse/openvswitch into openvswitch
Jesse Gross says:
====================
One bug fix for net/3.8 for a long standing problem that was reported a few
times recently.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 8 Feb 2013 04:31:47 +0000 (23:31 -0500)]
Merge branch 'netback'
Ian Campbell says:
====================
The Xen netback implementation contains a couple of flaws which can
allow a guest to cause a DoS in the backend domain, potentially
affecting other domains in the system.
CVE-2013-0216 is a failure to sanity check the ring producer/consumer
pointers which can allow a guest to cause netback to loop for an
extended period preventing other work from occurring.
CVE-2013-0217 is a memory leak on an error path which is guest
triggerable.
The following series contains the fixes for these issues, as previously
included in Xen Security Advisory 39:
http://lists.xen.org/archives/html/xen-announce/2013-02/msg00001.html
Changes in v2:
- Typo and block comment format fixes
- Added stable Cc
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ian Campbell [Wed, 6 Feb 2013 23:41:38 +0000 (23:41 +0000)]
netback: correct netbk_tx_err to handle wrap around.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ian Campbell [Wed, 6 Feb 2013 23:41:37 +0000 (23:41 +0000)]
xen/netback: free already allocated memory on failure in xen_netbk_get_requests
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthew Daley [Wed, 6 Feb 2013 23:41:36 +0000 (23:41 +0000)]
xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ian Campbell [Wed, 6 Feb 2013 23:41:35 +0000 (23:41 +0000)]
xen/netback: shutdown the ring if it contains garbage.
A buggy or malicious frontend should not be able to confuse netback.
If we spot anything which is not as it should be then shutdown the
device and don't try to continue with the ring in a potentially
hostile state. Well behaved and non-hostile frontends will not be
penalised.
As well as making the existing checks for such errors fatal also add a
new check that ensures that there isn't an insane number of requests
on the ring (i.e. more than would fit in the ring). If the ring
contains garbage then previously is was possible to loop over this
insane number, getting an error each time and therefore not generating
any more pending requests and therefore not exiting the loop in
xen_netbk_tx_build_gops for an externded period.
Also turn various netdev_dbg calls which no precipitate a fatal error
into netdev_err, they are rate limited because the device is shutdown
afterwards.
This fixes at least one known DoS/softlockup of the backend domain.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 8 Feb 2013 01:22:30 +0000 (12:22 +1100)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/rusty/linux
Pull virtio fix from Rusty Russell:
"Obviously I forgot to push this before linux.conf.au..."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
virtio_console: Don't access uninitialized data.
Linus Torvalds [Fri, 8 Feb 2013 01:15:14 +0000 (12:15 +1100)]
Merge tag 'rdma-for-linus' of git://git./linux/kernel/git/roland/infiniband
Pull IB regression fixes from Roland Dreier:
- Fix mlx4 VFs not working on old guests because of 64B CQE changes
- Fix ill-considered sparse fix for qib
- Fix IPoIB crash due to skb double destruct introduced in 3.8-rc1
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/qib: Fix for broken sparse warning fix
mlx4_core: Fix advertisement of wrong PF context behaviour
IPoIB: Fix crash due to skb double destruct
Linus Torvalds [Fri, 8 Feb 2013 01:06:46 +0000 (12:06 +1100)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"We've got corner cases for updating i_size that ceph was hitting,
error handling for quotas when we run out of space, a very subtle
snapshot deletion race, a crash while removing devices, and one
deadlock between subvolume creation and the sb_internal code (thanks
lockdep)."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: move d_instantiate outside the transaction during mksubvol
Btrfs: fix EDQUOT handling in btrfs_delalloc_reserve_metadata
Btrfs: fix possible stale data exposure
Btrfs: fix missing i_size update
Btrfs: fix race between snapshot deletion and getting inode
Btrfs: fix missing release of the space/qgroup reservation in start_transaction()
Btrfs: fix wrong sync_writers decrement in btrfs_file_aio_write()
Btrfs: do not merge logged extents if we've removed them from the tree
btrfs: don't try to notify udev about missing devices
Linus Torvalds [Fri, 8 Feb 2013 01:00:44 +0000 (12:00 +1100)]
Merge tag 'pinctrl-for-v3.8-late' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull late pinctrl fixes from Linus Walleij:
"Two patches appeared as of late, one was completely news to me, the
other one was rotated in -next for the next merge window but turned
out to be a showstopper.
- Exynos Kconfig fixup
- SIRF DT translation bug"
* tag 'pinctrl-for-v3.8-late' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sirf: replace of_gpio_simple_xlate by sirf specific of_xlate
pinctrl: exynos: change PINCTRL_EXYNOS option
Linus Torvalds [Fri, 8 Feb 2013 00:55:27 +0000 (11:55 +1100)]
Merge tag 'stable/for-linus-3.8-rc6-tag' of git://git./linux/kernel/git/konrad/xen
Pull Xen fixes from Konrad Rzeszutek Wilk:
"This has two fixes. One is a security fix wherein we would spam the
kernel printk buffer if one of the guests was misbehaving. The other
is much tamer and it was us only checking for one type of error from
the IRQ subsystem (when allocating new IRQs) instead of for all of
them.
- Fix an IRQ allocation where we only check for a specific error (-1).
- CVE-2013-0231 / XSA-43. Make xen-pciback rate limit error messages
from xen_pcibk_enable_msi{,x}()"
* tag 'stable/for-linus-3.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: fix error handling path if xen_allocate_irq_dynamic fails
xen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}()
Linus Torvalds [Fri, 8 Feb 2013 00:52:53 +0000 (11:52 +1100)]
Merge tag 'regulator-v3.8-rc6' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Mostly driver specific fixes here, though one of them uncovered the
issue Stephen Warren fixed with multiple OF matches getting upset due
to a lack of cleanup."
* tag 'regulator-v3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: s2mps11: fix incorrect register for buck10
regulator: clear state each invocation of of_regulator_match
regulator: max8997: Fix using wrong dev argument at various places
regulator: max77686: Fix using wrong dev argument at various places
regulator: max8907: Fix using wrong dev argument for calling of_regulator_match
regulator: max8998: fix incorrect min_uV value for ldo10
regulator: tps65910: Fix using wrong dev argument for calling of_regulator_match
regulator: tps65217: Fix using wrong dev argument for calling of_regulator_match
Daniel Vetter [Mon, 14 Jan 2013 14:08:14 +0000 (15:08 +0100)]
drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try
This fixes up
commit
e8e89622ed361c46bf90ba4828e685a8b603f7e5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Dec 18 22:25:11 2012 +0100
drm/ttm: fix fence locking in ttm_buffer_object_transfer
which leaves behind a might_sleep in atomic context, since the
fence_lock spinlock is held over a kmalloc(GFP_KERNEL) call. The fix
is to revert the above commit and only take the lock where we need it,
around the call to ->sync_obj_ref.
v2: Fixup things noticed by Maarten Lankhorst:
- Brown paper bag locking bug.
- No need for kzalloc if we clear the entire thing on the next line.
- check for bo->sync_obj (totally unlikely race, but still someone
else could have snuck in) and clear fbo->sync_obj if it's cleared
already.
Reported-by: Dave Airlie <airlied@gmail.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Sjur Brændeland [Mon, 21 Jan 2013 23:20:26 +0000 (09:50 +1030)]
virtio_console: Don't access uninitialized data.
Don't access uninitialized work-queue when removing device.
The work queue is initialized only if the device multi-queue.
So don't call cancel_work unless this is a multi-queue device.
This fixes the following panic:
Kernel panic - not syncing: BUG!
Call Trace:
62031b28: [<
6026085d>] panic+0x16b/0x2d3
62031b30: [<
6004ef5e>] flush_work+0x0/0x1d7
62031b60: [<
602606f2>] panic+0x0/0x2d3
62031b68: [<
600333b0>] memcpy+0x0/0x140
62031b80: [<
6002d58a>] unblock_signals+0x0/0x84
62031ba0: [<
602609c5>] printk+0x0/0xa0
62031bd8: [<
60264e51>] __mutex_unlock_slowpath+0x13d/0x148
62031c10: [<
6004ef5e>] flush_work+0x0/0x1d7
62031c18: [<
60050234>] try_to_grab_pending+0x0/0x17e
62031c38: [<
6004e984>] get_work_gcwq+0x71/0x8f
62031c48: [<
60050539>] __cancel_work_timer+0x5b/0x115
62031c78: [<
628acc85>] unplug_port+0x0/0x191 [virtio_console]
62031c98: [<
6005061c>] cancel_work_sync+0x12/0x14
62031ca8: [<
628ace96>] virtcons_remove+0x80/0x15c [virtio_console]
62031ce8: [<
628191de>] virtio_dev_remove+0x1e/0x7e [virtio]
62031d08: [<
601cf242>] __device_release_driver+0x75/0xe4
62031d28: [<
601cf2dd>] device_release_driver+0x2c/0x40
62031d48: [<
601ce0dd>] driver_unbind+0x7d/0xc6
62031d88: [<
601cd5d9>] drv_attr_store+0x27/0x29
62031d98: [<
60115f61>] sysfs_write_file+0x100/0x14d
62031df8: [<
600b737d>] vfs_write+0xcb/0x184
62031e08: [<
600b58b8>] filp_close+0x88/0x94
62031e38: [<
600b7686>] sys_write+0x59/0x88
62031e88: [<
6001ced1>] handle_syscall+0x5d/0x80
62031ea8: [<
60030a74>] userspace+0x405/0x531
62031f08: [<
600d32cc>] sys_dup+0x0/0x5e
62031f28: [<
601b11d6>] strcpy+0x0/0x18
62031f38: [<
600be46c>] do_execve+0x10/0x12
62031f48: [<
600184c7>] run_init_process+0x43/0x45
62031fd8: [<
60019a91>] new_thread_handler+0xba/0xbc
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Linus Torvalds [Wed, 6 Feb 2013 21:43:30 +0000 (08:43 +1100)]
Merge tag 'sound-3.8' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a couple of build regression fixes for ASoC fsl stuff. It
doesn't look too trivial, but neither intrusive, so hopefully I can
avoid your curse..."
Hey, Takashi has a good track record, I think he gets a pass..
* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: fsl: fix snd-soc-imx-pcm module build
Revert "ASoC: fsl: fix multiple definition of init_module"
Linus Torvalds [Wed, 6 Feb 2013 21:38:33 +0000 (08:38 +1100)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"I've got a few bits pending for 3.8 final, that I better get sent out.
It's all been sitting for a while, I consider it safe.
It contains:
- Two bug fixes for mtip32xx, fixing a driver hang and a crash.
- A few-liner protocol error fix for drbd.
- A few fixes for the xen block front/back driver, fixing a potential
data corruption issue.
- A race fix for disk_clear_events(), causing spurious warnings. Out
of the Chrome OS base.
- A deadlock fix for disk_clear_events(), moving it to the a
unfreezable workqueue. Also from the Chrome OS base."
* 'for-linus' of git://git.kernel.dk/linux-block:
drbd: fix potential protocol error and resulting disconnect/reconnect
mtip32xx: fix for crash when the device surprise removed during rebuild
mtip32xx: fix for driver hang after a command timeout
block: prevent race/cleanup
block: remove deadlock in disk_clear_events
xen-blkfront: handle bvecs with partial data
llist/xen-blkfront: implement safe version of llist_for_each_entry
xen-blkback: implement safe iterator for the list of persistent grants
Bjørn Mork [Wed, 6 Feb 2013 05:22:08 +0000 (05:22 +0000)]
net: qmi_wwan: add more Huawei devices, including E320
Adding new class/subclass/protocol combinations based on the GPLed
out-of-tree Huawei driver. One of these has already appeared on a
device labelled as "E320".
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Wed, 6 Feb 2013 05:21:53 +0000 (05:21 +0000)]
net: cdc_ncm: add another Huawei vendor specific device
Adding a new vendor specific class/subclass/protocol combination
for CDC NCM devices based on information from a GPLed out-of-tree
driver from Huawei.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tommi Rantala [Wed, 6 Feb 2013 03:24:02 +0000 (03:24 +0000)]
ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
ip6gre_tunnel_xmit() is leaking the skb when we hit this error branch,
and the -1 return value from this function is bogus. Use the error
handling we already have in place in ip6gre_tunnel_xmit() for this error
case to fix this.
Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Mon, 4 Feb 2013 02:14:25 +0000 (02:14 +0000)]
tcp: fix for zero packets_in_flight was too broad
There are transients during normal FRTO procedure during which
the packets_in_flight can go to zero between write_queue state
updates and firing the resulting segments out. As FRTO processing
occurs during that window the check must be more precise to
not match "spuriously" :-). More specificly, e.g., when
packets_in_flight is zero but FLAG_DATA_ACKED is true the problematic
branch that set cwnd into zero would not be taken and new segments
might be sent out later.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Tested-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 6 Feb 2013 19:51:14 +0000 (14:51 -0500)]
Merge branch 'wireless'
John W. Linville says:
====================
Please consider this pull request for the 3.8 stream...
Included is a bluetooth pull. Gustavo says:
"Two simple fixes for 3.8. One of the patches fixes a situation
where the connection wasn't terminated if a timeout ocurrs for LE
an SCO connections. The other fixes prevent NULL dereference in the
SMP code, it is a security fix as well."
Along with those...
Hauke Mehrtens provides a couple of ssb and bcma bus fixes that
prevent oopses when unloading those modules.
Larry Finger provides and rtlwifi fix to avoid a "scheduling while
atomic" bug.
Last but certainly not least, Arend van Spriel bring a brcmsmac fix that
reworks the mac80211 .flush() callback in order to avoid the dreaded
brcms_c_wait_for_tx_completion warnings. This one looks a little
large, but I think it is safe and isolated to brcmsmac in any case.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville [Wed, 6 Feb 2013 18:55:44 +0000 (13:55 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem
Chris Mason [Wed, 6 Feb 2013 17:06:02 +0000 (12:06 -0500)]
Btrfs: move d_instantiate outside the transaction during mksubvol
Dave Sterba triggered a lockdep complaint about lock ordering
between the sb_internal lock and the cleaner semaphore.
btrfs_lookup_dentry() checks for orphans if we're looking up
the inode for a subvolume, and subvolume creation is triggering
the lookup with a transaction running.
This commit moves the d_instantiate after the transaction closes.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Wei Liu [Thu, 31 Jan 2013 14:46:56 +0000 (14:46 +0000)]
xen: fix error handling path if xen_allocate_irq_dynamic fails
It is possible that the call to xen_allocate_irq_dynamic() returns negative
number other than -1.
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Jan Beulich [Wed, 6 Feb 2013 15:30:38 +0000 (10:30 -0500)]
xen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}()
... as being guest triggerable (e.g. by invoking
XEN_PCI_OP_enable_msi{,x} on a device not being MSI/MSI-X capable).
This is CVE-2013-0231 / XSA-43.
Also make the two messages uniform in both their wording and severity.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Takashi Iwai [Wed, 6 Feb 2013 14:16:58 +0000 (15:16 +0100)]
Merge branch 'fix/fsl' of git://git./linux/kernel/git/broonie/sound into for-linus-uncursed
We need this for fixing build error regressions in soc/fsl.
Jan Schmidt [Mon, 28 Jan 2013 06:26:00 +0000 (23:26 -0700)]
Btrfs: fix EDQUOT handling in btrfs_delalloc_reserve_metadata
When btrfs_qgroup_reserve returned a failure, we were missing a counter
operation for BTRFS_I(inode)->outstanding_extents++, leading to warning
messages about outstanding extents and space_info->bytes_may_use != 0.
Additionally, the error handling code didn't take into account that we
dropped the inode lock which might require more cleanup.
Luckily, all the cleanup code we need is already there and can be shared
with reserve_metadata_bytes, which is exactly what this patch does.
Reported-by: Lev Vainblat <lev@zadarastorage.com>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Mark Brown [Wed, 6 Feb 2013 11:28:53 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/tps65910' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:52 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/tps65217' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:51 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/s2mps11' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:51 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/of' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:50 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/max8998' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:49 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/max8997' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:48 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/max8907' into tmp
Mark Brown [Wed, 6 Feb 2013 11:28:48 +0000 (11:28 +0000)]
Merge remote-tracking branch 'regulator/fix/max77686' into tmp
Chris Mason [Wed, 6 Feb 2013 00:24:44 +0000 (19:24 -0500)]
Merge git://git./linux/kernel/git/josef/btrfs-next.git for-chris into for-linus
Linus Torvalds [Tue, 5 Feb 2013 21:36:12 +0000 (08:36 +1100)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"For a regression fix on a few radio drivers that were preventing radio
TX to work on those devices"
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] radio: set vfl_dir correctly to fix modulator regression
Linus Torvalds [Tue, 5 Feb 2013 21:32:32 +0000 (08:32 +1100)]
Merge tag 'usb-3.8-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are a few tiny USB fixes for 3.8-rc6.
Nothing major here, some host controller bug fixes to resolve a number
of bugs that people have reported, and a bunch of additional device
ids are added to a number of drivers (which caused code to be deleted
from the usb-storage driver, always nice)"
* tag 'usb-3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
USB: storage: optimize to match the Huawei USB storage devices and support new switch command
USB: storage: Define a new macro for USB storage match rules
USB: ftdi_sio: add Zolix FTDI PID
USB: option: add Changhong CH690
USB: ftdi_sio: add PID/VID entries for ELV WS 300 PC II
USB: add OWL CM-160 support to cp210x driver
USB: EHCI: fix bug in scheduling periodic split transfers
USB: EHCI: fix for leaking isochronous data
USB: option: add support for Telit LE920
USB: qcserial: add Telit Gobi QDL device
USB: EHCI: fix timer bug affecting port resume
USB: UHCI: notify usbcore about port resumes
USB: EHCI: notify usbcore about port resumes
USB: add usb_hcd_{start,end}_port_resume
USB: EHCI: unlink one async QH at a time
USB: EHCI: remove ASS/PSS polling timeout
usb: Using correct way to clear usb3.0 device's remote wakeup feature.
usb: Prevent dead ports when xhci is not enabled
USB: XHCI: fix memory leak of URB-private data
drivers: xhci: fix incorrect bit test
...
Linus Torvalds [Tue, 5 Feb 2013 21:23:47 +0000 (08:23 +1100)]
Merge branch 'fixes-for-v3.8-rc7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull DMA mapping fixes from Marek Szyprowski:
"This pull request contains important bugfix patches for 9
architectures, which finally fixes broken allmodconfig builds
introduced in v3.8-rc1. Those architectures don't use dma_map_ops
based implementation and require manual update or additional dummy
implementations of the missing new dma-mapping api functions:
dma_mmap_coherent and dma_get_sgtable."
* 'fixes-for-v3.8-rc7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
xtensa: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
parisc: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
mn10300: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
m68k: Provide dma_mmap_coherent() and dma_get_sgtable()
frv: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
cris: Provide dma_mmap_coherent() and dma_get_sgtable()
c6x: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
blackfin: Provide dma_mmap_coherent() and dma_get_sgtable()
avr32: Provide dma_mmap_coherent() and dma_get_sgtable()
Josef Bacik [Wed, 30 Jan 2013 19:31:31 +0000 (14:31 -0500)]
Btrfs: fix possible stale data exposure
We specifically do not update the disk i_size if there are ordered extents
outstanding for any area between the current disk_i_size and our ordered
extent so that we do not expose stale data. The problem is the check we
have only checks if the ordered extent starts at or after the current
disk_i_size, which doesn't take into account an ordered extent that starts
before the current disk_i_size and ends past the disk_i_size. Fix this by
checking if the extent ends past the disk_i_size. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Josef Bacik [Wed, 30 Jan 2013 19:17:31 +0000 (14:17 -0500)]
Btrfs: fix missing i_size update
If we have an ordered extent before the ordered extent we are currently
completing that is after the current disk_i_size we will put our i_size
update into that ordered extent so that we do not expose stale data. The
problem is that if our disk i_size is updated past the previous ordered
extent we won't update the i_size with the pending i_size update. So check
the pending i_size update and if its above the current disk i_size we need
to go ahead and try to update. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Liu Bo [Tue, 29 Jan 2013 03:22:10 +0000 (03:22 +0000)]
Btrfs: fix race between snapshot deletion and getting inode
While running snapshot testscript created by Mitch and David,
the race between autodefrag and snapshot deletion can lead to
corruption of dead_root list so that we can get crash on
btrfs_clean_old_snapshots().
And besides autodefrag, scrub also does the same thing, ie. read
root first and get inode.
Here is the story(take autodefrag as an example):
(1) when we delete a snapshot or subvolume, it will set its root's
refs to zero and do a iput() on its own inode, and if this inode happens
to be the only active in-meory one in root's inode rbtree, it will add
itself to the global dead_roots list for later cleanup.
(2) after (1), the autodefrag thread may read another inode for defrag
and the inode is just in the deleted snapshot/subvolume, but all of these
are without checking if the root is still valid(refs > 0). So the end up
result is adding the deleted snapshot/subvolume's root to the global
dead_roots list AGAIN.
Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu.
So all we need to do is to take the lock to protect 'read root and get inode',
since we synchronize to wait for the rcu grace period before adding something
to the global dead_roots list.
Reported-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Miao Xie [Mon, 28 Jan 2013 12:36:22 +0000 (12:36 +0000)]
Btrfs: fix missing release of the space/qgroup reservation in start_transaction()
When we fail to start a transaction, we need to release the reserved free space
and qgroup space, fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Miao Xie [Mon, 28 Jan 2013 12:34:55 +0000 (12:34 +0000)]
Btrfs: fix wrong sync_writers decrement in btrfs_file_aio_write()
If the checks at the beginning of btrfs_file_aio_write() fail, we needn't
decrease ->sync_writers, because we have not increased it. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Josef Bacik [Mon, 28 Jan 2013 14:45:20 +0000 (09:45 -0500)]
Btrfs: do not merge logged extents if we've removed them from the tree
You can run into this problem where if somebody is fsyncing and writing out
the existing extents you will have removed the extent map from the em tree,
but it's still valid for the current fsync so we go ahead and write it. The
problem is we unconditionally try to merge it back into the em tree, but if
we've removed it from the em tree that will cause use after free problems.
Fix this to only merge if we are still a part of the tree. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Roland Dreier [Tue, 5 Feb 2013 17:45:25 +0000 (09:45 -0800)]
Merge branches 'ipoib', 'mlx4' and 'qib' into for-next
Mike Marciniszyn [Thu, 24 Jan 2013 18:59:34 +0000 (18:59 +0000)]
IB/qib: Fix for broken sparse warning fix
Commit
1fb9fed6d489 ("IB/qib: Fix QP RCU sparse warning") broke QP
hash list deletion in qp_remove() badly.
This patch restores the former for loop behavior, while still fixing
the sparse warnings.
Cc: <stable@vger.kernel.org>
Reviewed-by: Gary Leshner <gary.s.leshner@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Or Gerlitz [Thu, 10 Jan 2013 15:18:35 +0000 (15:18 +0000)]
mlx4_core: Fix advertisement of wrong PF context behaviour
Commit
08ff32352d6f ("mlx4: 64-byte CQE/EQE support") introduced a
regression where older guest VF drivers failed to load even when
64-byte EQEs/CQEs are disabled, since the PF wrongly advertises the
new context behaviour anyway. The failure looks like:
mlx4_core 0000:00:07.0: Unknown pf context behaviour
mlx4_core 0000:00:07.0: Failed to obtain slave caps
mlx4_core: probe of 0000:00:07.0 failed with error -38
Fix this by basing this advertisement on dev->caps.flags, which is the
operational capabilities used by the QUERY_FUNC_CAP command wrapper
(dev_cap->flags holds the firmware capabilities).
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Shlomo Pongratz [Mon, 4 Feb 2013 15:29:10 +0000 (15:29 +0000)]
IPoIB: Fix crash due to skb double destruct
After commit
b13912bbb4a2 ("IPoIB: Call skb_dst_drop() once skb is
enqueued for sending"), using connected mode and running multithreaded
iperf for long time, ie
iperf -c <IP> -P 16 -t 3600
results in a crash.
After the above-mentioned patch, the driver is calling skb_orphan() and
skb_dst_drop() after calling post_send() in ipoib_cm.c::ipoib_cm_send()
(also in ipoib_ib.c::ipoib_send())
The problem with this is, as is written in a comment in both routines,
"it's entirely possible that the completion handler will run before we
execute anything after the post_send()." This leads to running the
skb cleanup routines simultaneously in two different contexts.
The solution is to always perform the skb_orphan() and skb_dst_drop()
before queueing the send work request. If an error occurs, then it
will be no different than the regular case where dev_free_skb_any() in
the completion path, which is assumed to be after these two routines.
Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Barry Song [Mon, 4 Feb 2013 09:53:34 +0000 (17:53 +0800)]
pinctrl: sirf: replace of_gpio_simple_xlate by sirf specific of_xlate
the default of_gpio_simple_xlate() will make us fail while getting gpios
bigger than 32 by of_get_named_gpio() or related APIs.
this patch adds a specific of_xlate callback for sirf gpio_chip and fix
the problem.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Kukjin Kim [Fri, 18 Jan 2013 19:35:06 +0000 (20:35 +0100)]
pinctrl: exynos: change PINCTRL_EXYNOS option
Since pinctrl-exynos can support exynos4 and exynos5 so changed
the option name to PINCTRL_EXYNOS for more clarity.
Cc: Thomas Abraham <Thomas.abraham@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Torvalds [Tue, 5 Feb 2013 09:50:11 +0000 (20:50 +1100)]
Merge branch 'fix-max-write' of git://git./linux/kernel/git/teigland/linux-dlm
Pull dlm fix from David Teigland:
"Thanks to Jana who reported the problem and was able to test this fix
so quickly."
This fixes an incorrect size check that triggered for CONFIG_COMPAT
whether the code was actually doing compat or not. The incorrect write
size check broke userland (clvmd) when maximum resource name lengths are
used.
* 'fix-max-write' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: check the write size from user
Linus Torvalds [Tue, 5 Feb 2013 09:38:59 +0000 (20:38 +1100)]
Merge branch 'akpm' (Andrew's patch-bomb)
Merge mix fixes from Andrew Morton.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (12 commits)
drivers/rtc/rtc-pl031.c: fix the missing operation on enable
drivers/rtc/rtc-isl1208.c: call rtc_update_irq() from the alarm irq handler
samples/seccomp: be less stupid about cross compiling
checkpatch: fix $Float creation of match variables
memcg: fix typo in kmemcg cache walk macro
mm: fix wrong comments about anon_vma lock
MAINTAINERS: update avr32 web ressources
mm/hugetlb: set PTE as huge in hugetlb_change_protection and remove_migration_pte
drivers/rtc/rtc-vt8500.c: fix year field in vt8500_rtc_set_time()
tools/vm: add .gitignore to ignore built binaries
thp: avoid dumping huge zero page
nilfs2: fix fix very long mount time issue
Haojian Zhuang [Mon, 4 Feb 2013 22:28:54 +0000 (14:28 -0800)]
drivers/rtc/rtc-pl031.c: fix the missing operation on enable
The RTC control register should be enabled in the process of
initializing.
Without this patch, I failed to enable RTC in Hisilicon Hi3620 SoC. The
register mapping section in RTC is always read as zero. So I doubt that
ST guys may already enable this register in bootloader. So they won't
meet this issue.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Luebbe [Mon, 4 Feb 2013 22:28:53 +0000 (14:28 -0800)]
drivers/rtc/rtc-isl1208.c: call rtc_update_irq() from the alarm irq handler
Previously the alarm event was not propagated into the RTC subsystem.
By adding a call to rtc_update_irq, this fixes a timeout problem with
the hwclock utility.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Mon, 4 Feb 2013 22:28:52 +0000 (14:28 -0800)]
samples/seccomp: be less stupid about cross compiling
The seccomp filters are currently built for the build host, not for the
machine that they are going to run on, but they are also built for with
the -m32 flag if the kernel is built for a 32 bit machine, both of which
seems rather odd.
It broke allyesconfig on my machine, which is x86-64, but building for
32 bit ARM, with this error message:
In file included from /usr/include/stdio.h:28:0,
from samples/seccomp/bpf-fancy.c:15:
/usr/include/features.h:324:26: fatal error: bits/predefs.h: No such file or directory
because there are no 32 bit libc headers installed on this machine. We
should really be building all the samples for the target machine rather
than the build host, but since the infrastructure for that appears to be
missing right now, let's be a little bit smarter and not pass the '-m32'
flag to the HOSTCC when cross- compiling.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Morris <james.l.morris@oracle.com>
Acked-by: Will Drewry <wad@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Mon, 4 Feb 2013 22:28:51 +0000 (14:28 -0800)]
checkpatch: fix $Float creation of match variables
Commit
74349bccedb3 ("checkpatch: add support for floating point
constants") added an unnecessary match variable that caused tests that
used a $Constant or $LvalOrFunc to have one too many matches.
This causes problems with usleep_range, min/max and other extended
tests.
Avoid using match variables in $Float.
Avoid using match variables in $Assignment too.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Glauber Costa [Mon, 4 Feb 2013 22:28:49 +0000 (14:28 -0800)]
memcg: fix typo in kmemcg cache walk macro
The macro for_each_memcg_cache_index contains a silly yet potentially
deadly mistake. Although the macro parameter is _idx, the loop tests
are done over i, not _idx.
This hasn't generated any problems so far, because all users use i as a
loop index. However, while playing with an extension of the code I
ended using another loop index and the compiler was quick to complain.
Unfortunately, this is not the kind of thing that testing reveals =(
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yuanhan Liu [Mon, 4 Feb 2013 22:28:48 +0000 (14:28 -0800)]
mm: fix wrong comments about anon_vma lock
We use rwsem since commit
5a505085f043 ("mm/rmap: Convert the struct
anon_vma::mutex to an rwsem"). And most of comments are converted to
the new rwsem lock; while just 2 more missed from:
$ git grep 'anon_vma->mutex'
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthias Brugger [Mon, 4 Feb 2013 22:28:47 +0000 (14:28 -0800)]
MAINTAINERS: update avr32 web ressources
Web resource http://avr32linux.org/ is no longer available. We add the
mirror of the web page foud at http://mirror.egtvedt.no/avr32linux.org/.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tony Lu [Mon, 4 Feb 2013 22:28:46 +0000 (14:28 -0800)]
mm/hugetlb: set PTE as huge in hugetlb_change_protection and remove_migration_pte
When setting a huge PTE, besides calling pte_mkhuge(), we also need to
call arch_make_huge_pte(), which we indeed do in make_huge_pte(), but we
forget to do in hugetlb_change_protection() and remove_migration_pte().
Signed-off-by: Zhigang Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tony Prisk [Mon, 4 Feb 2013 22:28:44 +0000 (14:28 -0800)]
drivers/rtc/rtc-vt8500.c: fix year field in vt8500_rtc_set_time()
The year field is incorrectly masked when setting the date. If the year
is beyond 2099, the year field will be incorrectly updated in hardware.
This patch masks the year field correctly.
Signed-off-by: Edgar Toernig <froese@gmx.de>
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Mon, 4 Feb 2013 22:28:43 +0000 (14:28 -0800)]
tools/vm: add .gitignore to ignore built binaries
There is no .gitignore in tools/vm, so 'git status' always show built
binaries. To ignore this, add .gitignore.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Mon, 4 Feb 2013 22:28:42 +0000 (14:28 -0800)]
thp: avoid dumping huge zero page
No reason to preserve the huge zero page in core dumps.
Reported-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vyacheslav Dubeyko [Mon, 4 Feb 2013 22:28:41 +0000 (14:28 -0800)]
nilfs2: fix fix very long mount time issue
There exists a situation when GC can work in background alone without
any other filesystem activity during significant time.
The nilfs_clean_segments() method calls nilfs_segctor_construct() that
updates superblocks in the case of NILFS_SC_SUPER_ROOT and
THE_NILFS_DISCONTINUED flags are set. But when GC is working alone the
nilfs_clean_segments() is called with unset THE_NILFS_DISCONTINUED flag.
As a result, the update of superblocks doesn't occurred all this time
and in the case of SPOR superblocks keep very old values of last super
root placement.
SYMPTOMS:
Trying to mount a NILFS2 volume after SPOR in such environment ends with
very long mounting time (it can achieve about several hours in some
cases).
REPRODUCING PATH:
1. It needs to use external USB HDD, disable automount and doesn't
make any additional filesystem activity on the NILFS2 volume.
2. Generate temporary file with size about 100 - 500 GB (for example,
dd if=/dev/zero of=<file_name> bs=
1073741824 count=200). The size of
file defines duration of GC working.
3. Then it needs to delete file.
4. Start GC manually by means of command "nilfs-clean -p 0". When you
start GC by means of such way then, at the end, superblocks is updated
by once. So, for simulation of SPOR, it needs to wait sometime (15 -
40 minutes) and simply switch off USB HDD manually.
5. Switch on USB HDD again and try to mount NILFS2 volume. As a
result, NILFS2 volume will mount during very long time.
REPRODUCIBILITY: 100%
FIX:
This patch adds checking that superblocks need to update and set
THE_NILFS_DISCONTINUED flag before nilfs_clean_segments() call.
Reported-by: Sergey Alexandrov <splavgm@gmail.com>
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Tested-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arend van Spriel [Sat, 2 Feb 2013 13:36:50 +0000 (14:36 +0100)]
brcmsmac: rework of mac80211 .flush() callback operation
This patch addresses a long standing issue of the driver with the
mac80211 .flush() callback. Since implementing the .flush() callback
a number of issues have been fixed, but a WARN_ON_ONCE() was still
triggered because the timeout on the flush could still occur.
This patch changes the awkward design using msleep() into one using
a waitqueue. The waiting flush() context will kick the transmit dma
when it is idle and the timeout used waiting for the event is set
to 500 ms. Worst case there can be 64 frames outstanding for transmit
in the driver. At a rate of 1Mbps that would take 1.5 seconds assuming
MTU is 1500 bytes and ignoring retries. The WARN_ON_ONCE() is also
removed as this was put in to indicate the flush timeout as a reason
for the driver to stall. That was not happening since fixing endless
AMPDU retries with following upstream commit:
commit
85091fc0a75653e239dc8379658515e577544927
Author: Arend van Spriel <arend@broadcom.com>
Date: Thu Feb 23 18:38:22 2012 +0100
brcm80211: smac: fix endless retry of A-MPDU transmissions
bugzilla: 42840 <https://bugzilla.kernel.org/show_bug.cgi?id=42840>
bugzilla@redhat: <https://bugzilla.redhat.com/show_bug.cgi?id=799168>
bugzilla@redhat: <https://bugzilla.redhat.com/show_bug.cgi?id=787649>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Camaleón <noelamac@gmail.com>
Cc: Milan Bouchet-Valat <nalimilan@club-internet.fr>
Cc: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Hauke Mehrtens [Sun, 3 Feb 2013 22:25:34 +0000 (23:25 +0100)]
ssb: unregister gpios before unloading ssb
This patch unregisters the gpio chip before ssb gets unloaded.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Hauke Mehrtens [Sun, 3 Feb 2013 22:25:33 +0000 (23:25 +0100)]
bcma: unregister gpios before unloading bcma
This patch unregisters the gpio chip before bcma gets unloaded.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reported-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Sat, 2 Feb 2013 21:55:00 +0000 (15:55 -0600)]
rtlwifi: Fix scheduling while atomic bug
Kernel commits 41affd5 and 6539306 changed the locking in rtl_lps_leave()
from a spinlock to a mutex by doing the calls indirectly from a work queue
to reduce the time that interrupts were disabled. This change was fine for
most systems; however a scheduling while atomic bug was reported in
https://bugzilla.redhat.com/show_bug.cgi?id=903881. The backtrace indicates
that routine rtl_is_special(), which calls rtl_lps_leave() in three places
was entered in atomic context. These direct calls are replaced by putting a
request on the appropriate work queue.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-and-tested-by: Nathaniel Doherty <ntdoherty@gmail.com>
Cc: Nathaniel Doherty <ntdoherty@gmail.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Mon, 4 Feb 2013 21:40:07 +0000 (16:40 -0500)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth
David Teigland [Mon, 4 Feb 2013 21:31:22 +0000 (15:31 -0600)]
dlm: check the write size from user
Return EINVAL from write if the size is larger than
allowed. Do this before allocating kernel memory for
the bogus size, which could lead to OOM.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Tested-by: Jana Saout <jana@saout.de>
Signed-off-by: David Teigland <teigland@redhat.com>
Linus Torvalds [Mon, 4 Feb 2013 20:59:44 +0000 (07:59 +1100)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Three small fixlets"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel/cacheinfo: Shut up annoying warning
x86, doc: Boot protocol 2.12 is in 3.8
x86-64: Replace left over sti/cli in ia32 audit exit code
Linus Torvalds [Mon, 4 Feb 2013 20:58:24 +0000 (07:58 +1100)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Three small fixlets"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Fix format string for 32-bit platforms
sched: Fix warning in kernel/sched/fair.c
sched/rt: Use root_domain of rt_rq not current processor
Linus Torvalds [Mon, 4 Feb 2013 20:57:09 +0000 (07:57 +1100)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Three fixlets and two small (and low risk) hw-enablement changes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix event group context move
x86/perf: Add IvyBridge EP support
perf/x86: Fix P6 driver section warning
arch/x86/tools/insn_sanity.c: Identify source of messages
perf/x86: Enable Intel Lincroft/Penwell/Cloverview Atom support
Linus Torvalds [Mon, 4 Feb 2013 20:56:07 +0000 (07:56 +1100)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull two small RCU fixlets from Ingo Molnar.
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Make rcu_nocb_poll an early_param instead of module_param
rcu: Prevent soft-lockup complaints about no-CBs CPUs
Linus Torvalds [Mon, 4 Feb 2013 20:54:11 +0000 (07:54 +1100)]
Merge tag 'for-linus-
20130204' of git://git.infradead.org/linux-mtd
Pull MTD fixes from David Woodhouse:
"A small set of simple regression and build fixes for 3.8:
- Fix a warning introduced in ONFI NAND probe
- Fix commandline partition parsing
- Require BITREVERSE for DiskOnChip G3 driver
- Fix build failure for davinci_nand as module
- Bump NFLASH_READY_RETRIES for bcm47xxnflash"
* tag 'for-linus-
20130204' of git://git.infradead.org/linux-mtd:
mtd: nand: onfi don't WARN if we are in 16 bits mode
mtd: physmap_of: fix cmdline partition method w/o linux, mtd-name
mtd: docg3 fix missing bitreverse lib
mtd: davinci_nand: fix modular build with CONFIG_OF=y
mtd: bcm47xxnflash: increase NFLASH_READY_RETRIES
fangxiaozhi [Mon, 4 Feb 2013 07:16:34 +0000 (15:16 +0800)]
USB: storage: optimize to match the Huawei USB storage devices and support new switch command
1. Optimize the match rules with new macro for Huawei USB storage devices,
to avoid to load USB storage driver for the modem interface
with Huawei devices.
2. Add to support new switch command for new Huawei USB dongles.
Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fangxiaozhi [Mon, 4 Feb 2013 07:14:46 +0000 (15:14 +0800)]
USB: storage: Define a new macro for USB storage match rules
1. Define a new macro for USB storage match rules:
matching with Vendor ID and interface descriptors.
Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>