virtio_net: fix page_to_skb() miss headroom

Because headroom is not passed to page_to_skb(), this causes the shinfo
exceeds the range. Then the frags of shinfo are changed by other process.

[  157.724634] stack segment: 0000 [#1] PREEMPT SMP NOPTI
[  157.725358] CPU: 3 PID: 679 Comm: xdp_pass_user_f Tainted: G            E      6.2.0+ #150
[  157.726401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/4
[  157.727820] RIP: 0010:skb_release_data+0x11b/0x180
[  157.728449] Code: 44 24 02 48 83 c3 01 39 d8 7e be 48 89 d8 48 c1 e0 04 41 80 7d 7e 00 49 8b 6c 04 30 79 0c 48 89 ef e8 89 b
[  157.730751] RSP: 0018:ffffc90000178b48 EFLAGS: 00010202
[  157.731383] RAX: 0000000000000010 RBX: 0000000000000001 RCX: 0000000000000000
[  157.732270] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff888100dd0b00
[  157.733117] RBP: 5d5d76010f6e2408 R08: ffff888100dd0b2c R09: 0000000000000000
[  157.734013] R10: ffffffff82effd30 R11: 000000000000a14e R12: ffff88810981ffc0
[  157.734904] R13: ffff888100dd0b00 R14: 0000000000000002 R15: 0000000000002310
[  157.735793] FS:  00007f06121d9740(0000) GS:ffff88842fcc0000(0000) knlGS:0000000000000000
[  157.736794] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  157.737522] CR2: 00007ffd9a56c084 CR3: 0000000104bda001 CR4: 0000000000770ee0
[  157.738420] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  157.739283] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  157.740146] PKRU: 55555554
[  157.740502] Call Trace:
[  157.740843]  <IRQ>
[  157.741117]  kfree_skb_reason+0x50/0x120
[  157.741613]  __udp4_lib_rcv+0x52b/0x5e0
[  157.742132]  ip_protocol_deliver_rcu+0xaf/0x190
[  157.742715]  ip_local_deliver_finish+0x77/0xa0
[  157.743280]  ip_sublist_rcv_finish+0x80/0x90
[  157.743834]  ip_list_rcv_finish.constprop.0+0x16f/0x190
[  157.744493]  ip_list_rcv+0x126/0x140
[  157.744952]  __netif_receive_skb_list_core+0x29b/0x2c0
[  157.745602]  __netif_receive_skb_list+0xed/0x160
[  157.746190]  ? udp4_gro_receive+0x275/0x350
[  157.746732]  netif_receive_skb_list_internal+0xf2/0x1b0
[  157.747398]  napi_gro_receive+0xd1/0x210
[  157.747911]  virtnet_receive+0x75/0x1c0
[  157.748422]  virtnet_poll+0x48/0x1b0
[  157.748878]  __napi_poll+0x29/0x1b0
[  157.749330]  net_rx_action+0x27a/0x340
[  157.749812]  __do_softirq+0xf3/0x2fb
[  157.750298]  do_softirq+0xa2/0xd0
[  157.750745]  </IRQ>
[  157.751563]  <TASK>
[  157.752329]  __local_bh_enable_ip+0x6d/0x80
[  157.753178]  virtnet_xdp_set+0x482/0x860
[  157.754159]  ? __pfx_virtnet_xdp+0x10/0x10
[  157.755129]  dev_xdp_install+0xa4/0xe0
[  157.756033]  dev_xdp_attach+0x20b/0x5e0
[  157.756933]  do_setlink+0x82e/0xc90
[  157.757777]  ? __nla_validate_parse+0x12b/0x1e0
[  157.758744]  rtnl_setlink+0xd8/0x170
[  157.759549]  ? mod_objcg_state+0xcb/0x320
[  157.760328]  ? security_capable+0x37/0x60
[  157.761209]  ? security_capable+0x37/0x60
[  157.762072]  rtnetlink_rcv_msg+0x145/0x3d0
[  157.762929]  ? ___slab_alloc+0x327/0x610
[  157.763754]  ? __alloc_skb+0x141/0x170
[  157.764533]  ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[  157.765422]  netlink_rcv_skb+0x58/0x110
[  157.766229]  netlink_unicast+0x21f/0x330
[  157.766951]  netlink_sendmsg+0x240/0x4a0
[  157.767654]  sock_sendmsg+0x93/0xa0
[  157.768434]  ? sockfd_lookup_light+0x12/0x70
[  157.769245]  __sys_sendto+0xfe/0x170
[  157.770079]  ? handle_mm_fault+0xe9/0x2d0
[  157.770859]  ? preempt_count_add+0x51/0xa0
[  157.771645]  ? up_read+0x3c/0x80
[  157.772340]  ? do_user_addr_fault+0x1e9/0x710
[  157.773166]  ? kvm_read_and_reset_apf_flags+0x49/0x60
[  157.774087]  __x64_sys_sendto+0x29/0x30
[  157.774856]  do_syscall_64+0x3c/0x90
[  157.775518]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[  157.776382] RIP: 0033:0x7f06122def70

Fixes: 18117a842ab0 ("virtio-net: remove xdp related info from page_to_skb()")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Use of_property_read_bool() for boolean properties

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to of_property_read_bool().

Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can
Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-dsa-marvell-mtu-reporting'

Vladimir Oltean says:

====================
Fix MTU reporting for Marvell DSA switches where we can't change it

As explained in patch 2, the driver doesn't know how to change the MTU
on MV88E6165, MV88E6191, MV88E6220, MV88E6250 and MV88E6290, and there
is a regression where it actually reports an MTU value below the
Ethernet standard (1500).

Fixing that shows another issue where DSA is unprepared to be told that
a switch supports an MTU of only 1500, and still errors out. That is
addressed by patch 1.

Testing was not done on "real" hardware, but on a different Marvell DSA
switch, with code modified such that the driver doesn't know how to
change the MTU on that, either.

A key assumption is that these switches don't need any MTU configuration
to pass full MTU-sized, DSA-tagged packets, which seems like a
reasonable assumption to make. My 6390 and 6190 switches, with
.port_set_jumbo_size commented out, certainly don't seem to have any
problem passing MTU-sized traffic, as can be seen in this iperf3 session
captured with tcpdump on the DSA master:

$MAC > $MAC, Marvell DSA mode Forward, dev 2, port 8, untagged, VID 1000,
FPri 0, ethertype IPv4 (0x0800), length 1518:
10.0.0.69.49590 > 10.0.0.1.5201: Flags [.], seq 81088:82536,
ack 1, win 502, options [nop,nop,TS val 2221498829 ecr 3012859850],
length 1448

I don't want to go all the way and say that the adjustment made by
commit b9c587fed61c ("dsa: mv88e6xxx: Include tagger overhead when
setting MTU for DSA and CPU ports") is completely unnecessary, just that
there's an equally good chance that the switches with unknown MTU
configuration procedure "just work".
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290

There are 3 classes of switch families that the driver is aware of, as
far as mv88e6xxx_change_mtu() is concerned:

- MTU configuration is available per port. Here, the
  chip->info->ops->port_set_jumbo_size() method will be present.

- MTU configuration is global to the switch. Here, the
  chip->info->ops->set_max_frame_size() method will be present.

- We don't know how to change the MTU. Here, none of the above methods
  will be present.

Switch families MV88E6165, MV88E6191, MV88E6220, MV88E6250 and MV88E6290
fall in category 3.

The blamed commit has adjusted the MTU for all 3 categories by EDSA_HLEN
(8 bytes), resulting in a new maximum MTU of 1492 being reported by the
driver for these switches.

I don't have the hardware to test, but I do have a MV88E6390 switch on
which I can simulate this by commenting out its .port_set_jumbo_size
definition from mv88e6390_ops. The result is this set of messages at
probe time:

mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 1
mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 2
mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 3
mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 4
mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 5
mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 6
mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 7
mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 8

It is highly implausible that there exist Ethernet switches which don't
support the standard MTU of 1500 octets, and this is what the DSA
framework says as well - the error comes from dsa_slave_create() ->
dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN).

But the error messages are alarming, and it would be good to suppress
them.

As a consequence of this unlikeliness, we reimplement mv88e6xxx_get_max_mtu()
and mv88e6xxx_change_mtu() on switches from the 3rd category as follows:
the maximum supported MTU is 1500, and any request to set the MTU to a
value larger than that fails in dev_validate_mtu().

Fixes: b9c587fed61c ("dsa: mv88e6xxx: Include tagger overhead when setting MTU for DSA and CPU ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: don't error out when drivers return ETH_DATA_LEN in .port_max_mtu()

Currently, when dsa_slave_change_mtu() is called on a user port where
dev->max_mtu is 1500 (as returned by ds->ops->port_max_mtu()), the code
will stumble upon this check:

if (new_master_mtu > mtu_limit)
return -ERANGE;

because new_master_mtu is adjusted for the tagger overhead but mtu_limit
is not.

But it would be good if the logic went through, for example if the DSA
master really depends on an MTU adjustment to accept DSA-tagged frames.

To make the code pass through the check, we need to adjust mtu_limit for
the overhead as well, if the minimum restriction was caused by the DSA
user port's MTU (dev->max_mtu). A DSA user port MTU and a DSA master MTU
are always offset by the protocol overhead.

Currently no drivers return 1500 .port_max_mtu(), but this is only
temporary and a bug in itself - mv88e6xxx should have done that, but
since commit b9c587fed61c ("dsa: mv88e6xxx: Include tagger overhead when
setting MTU for DSA and CPU ports") it no longer does. This is a
preparation for fixing that.

Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ice: xsk: disable txq irq before flushing hw

ice_qp_dis() intends to stop a given queue pair that is a target of xsk
pool attach/detach. One of the steps is to disable interrupts on these
queues. It currently is broken in a way that txq irq is turned off
*after* HW flush which in turn takes no effect.

ice_qp_dis():
-> ice_qvec_dis_irq()
--> disable rxq irq
--> flush hw
-> ice_vsi_stop_tx_ring()
-->disable txq irq

Below splat can be triggered by following steps:
- start xdpsock WITHOUT loading xdp prog
- run xdp_rxq_info with XDP_TX action on this interface
- start traffic
- terminate xdpsock

[  256.312485] BUG: kernel NULL pointer dereference, address: 0000000000000018
[  256.319560] #PF: supervisor read access in kernel mode
[  256.324775] #PF: error_code(0x0000) - not-present page
[  256.329994] PGD 0 P4D 0
[  256.332574] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  256.337006] CPU: 3 PID: 32 Comm: ksoftirqd/3 Tainted: G           OE      6.2.0-rc5+ #51
[  256.345218] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[  256.355807] RIP: 0010:ice_clean_rx_irq_zc+0x9c/0x7d0 [ice]
[  256.361423] Code: b7 8f 8a 00 00 00 66 39 ca 0f 84 f1 04 00 00 49 8b 47 40 4c 8b 24 d0 41 0f b7 45 04 66 25 ff 3f 66 89 04 24 0f 84 85 02 00 00 <49> 8b 44 24 18 0f b7 14 24 48 05 00 01 00 00 49 89 04 24 49 89 44
[  256.380463] RSP: 0018:ffffc900088bfd20 EFLAGS: 00010206
[  256.385765] RAX: 000000000000003c RBX: 0000000000000035 RCX: 000000000000067f
[  256.393012] RDX: 0000000000000775 RSI: 0000000000000000 RDI: ffff8881deb3ac80
[  256.400256] RBP: 000000000000003c R08: ffff889847982710 R09: 0000000000010000
[  256.407500] R10: ffffffff82c060c0 R11: 0000000000000004 R12: 0000000000000000
[  256.414746] R13: ffff88811165eea0 R14: ffffc9000d255000 R15: ffff888119b37600
[  256.421990] FS:  0000000000000000(0000) GS:ffff8897e0cc0000(0000) knlGS:0000000000000000
[  256.430207] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  256.436036] CR2: 0000000000000018 CR3: 0000000005c0a006 CR4: 00000000007706e0
[  256.443283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  256.450527] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  256.457770] PKRU: 55555554
[  256.460529] Call Trace:
[  256.463015]  <TASK>
[  256.465157]  ? ice_xmit_zc+0x6e/0x150 [ice]
[  256.469437]  ice_napi_poll+0x46d/0x680 [ice]
[  256.473815]  ? _raw_spin_unlock_irqrestore+0x1b/0x40
[  256.478863]  __napi_poll+0x29/0x160
[  256.482409]  net_rx_action+0x136/0x260
[  256.486222]  __do_softirq+0xe8/0x2e5
[  256.489853]  ? smpboot_thread_fn+0x2c/0x270
[  256.494108]  run_ksoftirqd+0x2a/0x50
[  256.497747]  smpboot_thread_fn+0x1c1/0x270
[  256.501907]  ? __pfx_smpboot_thread_fn+0x10/0x10
[  256.506594]  kthread+0xea/0x120
[  256.509785]  ? __pfx_kthread+0x10/0x10
[  256.513597]  ret_from_fork+0x29/0x50
[  256.517238]  </TASK>

In fact, irqs were not disabled and napi managed to be scheduled and run
while xsk_pool pointer was still valid, but SW ring of xdp_buff pointers
was already freed.

To fix this, call ice_qvec_dis_irq() after ice_vsi_stop_tx_ring(). Also
while at it, remove redundant ice_clean_rx_ring() call - this is handled
in ice_qp_clean_rings().

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-virtio-vsock'

test/vsock: copy to user failure test

This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case.
It tries to read data to NULL buffer (data already presents in socket's
queue), then uses valid buffer. For SOCK_STREAM second read must return
data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will
be dropped by kernel, and 'recv()' will return EAGAIN.

Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio/vsock: don't drop skbuff on copy failure

This returns behaviour of SOCK_STREAM read as before skbuff usage. When
copying to user fails current skbuff won't be dropped, but returned to
sockets's queue. Technically instead of 'skb_dequeue()', 'skb_peek()' is
called and when skbuff becomes empty, it is removed from queue by
'__skb_unlink()'.

Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio/vsock: remove redundant 'skb_pull()' call

Since we now no longer use 'skb->len' to update credit, there is no sense
to update skbuff state, because it is used only once after dequeue to
copy data and then will be released.

Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio/vsock: don't use skbuff state to account credit

'skb->len' can vary when we partially read the data, this complicates the
calculation of credit to be updated in 'virtio_transport_inc_rx_pkt()/
virtio_transport_dec_rx_pkt()'.

Also in 'virtio_transport_dec_rx_pkt()' we were miscalculating the
credit since 'skb->len' was redundant.

For these reasons, let's replace the use of skbuff state to calculate new
'rx_bytes'/'fwd_cnt' values with explicit value as input argument. This
makes code more simple, because it is not needed to change skbuff state
before each call to update 'rx_bytes'/'fwd_cnt'.

Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

block: remove obsolete config BLOCK_COMPAT

Before commit bdc1ddad3e5f ("compat_ioctl: block: move
blkdev_compat_ioctl() into ioctl.c"), the config BLOCK_COMPAT was used to
include compat_ioctl.c into the kernel build. With this commit, the code
is moved into ioctl.c and included with the config COMPAT. So, since then,
the config BLOCK_COMPAT has no effect and any further purpose.

Remove this obsolete config BLOCK_COMPAT.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230316111630.4897-1-lukas.bulwahn@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring/rsrc: fix folio accounting

| BUG: Bad page state in process kworker/u8:0  pfn:5c001
| page:00000000bfda61c8 refcount:0 mapcount:0 mapping:0000000000000000 index:0x20001 pfn:0x5c001
| head:0000000011409842 order:9 entire_mapcount:0 nr_pages_mapped:0 pincount:1
| anon flags: 0x3fffc00000b0004(uptodate|head|mappedtodisk|swapbacked|node=0|zone=0|lastcpupid=0xffff)
| raw: 03fffc0000000000 fffffc0000700001 ffffffff00700903 0000000100000000
| raw: 0000000000000200 0000000000000000 00000000ffffffff 0000000000000000
| head: 03fffc00000b0004 dead000000000100 dead000000000122 ffff00000a809dc1
| head: 0000000000020000 0000000000000000 00000000ffffffff 0000000000000000
| page dumped because: nonzero pincount
| CPU: 3 PID: 9 Comm: kworker/u8:0 Not tainted 6.3.0-rc2-00001-gc6811bf0cd87 #1
| Hardware name: linux,dummy-virt (DT)
| Workqueue: events_unbound io_ring_exit_work
| Call trace:
|  dump_backtrace+0x13c/0x208
|  show_stack+0x34/0x58
|  dump_stack_lvl+0x150/0x1a8
|  dump_stack+0x20/0x30
|  bad_page+0xec/0x238
|  free_tail_pages_check+0x280/0x350
|  free_pcp_prepare+0x60c/0x830
|  free_unref_page+0x50/0x498
|  free_compound_page+0xcc/0x100
|  free_transhuge_page+0x1f0/0x2b8
|  destroy_large_folio+0x80/0xc8
|  __folio_put+0xc4/0xf8
|  gup_put_folio+0xd0/0x250
|  unpin_user_page+0xcc/0x128
|  io_buffer_unmap+0xec/0x2c0
|  __io_sqe_buffers_unregister+0xa4/0x1e0
|  io_ring_exit_work+0x68c/0x1188
|  process_one_work+0x91c/0x1a58
|  worker_thread+0x48c/0xe30
|  kthread+0x278/0x2f0
|  ret_from_fork+0x10/0x20

Mark reports an issue with the recent patches coalescing compound pages
while registering them in io_uring. The reason is that we try to drop
excessive references with folio_put_refs(), but pages were acquired
with pin_user_pages(), which has extra accounting and so should be put
down with matching unpin_user_pages() or at least gup_put_folio().

As a fix unpin_user_pages() all but first page instead, and let's figure
out a better API after.

Fixes: 57bebf807e2abcf8 ("io_uring/rsrc: optimise registered huge pages")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/10efd5507d6d1f05ea0f3c601830e08767e189bd.1678980230.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

fbdev: Use of_property_present() for testing DT property presence

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: au1200fb: Fix potential divide by zero

var->pixclock can be assigned to zero by user. Without
proper check, divide by zero would occur when invoking
macro PICOS2KHZ in au1200fb_fb_check_var.

Error out if var->pixclock is zero.

Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: lxfb: Fix potential divide by zero

var->pixclock can be assigned to zero by user. Without proper
check, divide by zero would occur in lx_set_clock.

Error out if var->pixclock is zero.

Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: intelfb: Fix potential divide by zero

Variable var->pixclock is controlled by user and can be assigned
to zero. Without proper check, divide by zero would occur in
intelfbhw_validate_mode and intelfbhw_mode_to_hw.

Error out if var->pixclock is zero.

Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: nvidia: Fix potential divide by zero

variable var->pixclock can be set by user. In case it
equals to zero, divide by zero would occur in nvidiafb_set_par.

Similar crashes have happened in other fbdev drivers. There
is no check and modification on var->pixclock along the call
chain to nvidia_check_var and nvidiafb_set_par. We believe it
could also be triggered in driver nvidia from user site.

Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: stifb: Provide valid pixelclock and add fb_check_var() checks

Find a valid modeline depending on the machine graphic card
configuration and add the fb_check_var() function to validate
Xorg provided graphics settings.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org

kbuild: use git-archive for source package creation

Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git")
added a new tool, scripts/list-gitignored. My intention was to create
source packages without cleaning the source tree, without relying on git.

Linus strongly objected to it, and suggested using 'git archive' instead.
[1] [2] [3]

This commit goes in that direction - Remove scripts/list-gitignored.c
and rewrites Makefiles and scripts to use 'git archive' for building
Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg'
use 'git archive' again.

Going forward, building source packages is only possible in a git-managed
tree. Building binary packages does not require git.

[1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/
[3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/

Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git")
Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

kbuild: rpm-pkg: move source components to rpmbuild/SOURCES

Prepare to add more files to the source RPM.

Also, fix the build error when KCONFIG_CONFIG is set:
  error: Bad file: ./.config: No such file or directory

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

io_uring/msg_ring: let target know allocated index

msg_ring requests transferring files support auto index selection via
IORING_FILE_INDEX_ALLOC, however they don't return the selected index
to the target ring and there is no other good way for the userspace to
know where is the receieved file.

Return the index for allocated slots and 0 otherwise, which is
consistent with other fixed file installing requests.

Cc: stable@vger.kernel.org # v6.0+
Fixes: e6130eba8a848 ("io_uring: add support for passing fixed file descriptors")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://github.com/axboe/liburing/issues/809
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'nvme-6.3-2022-03-16' of git://git.infradead.org/nvme into block-6.3

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.3

 - avoid potential UAF in nvmet_req_complete (Damien Le Moal)
 - more quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen)
 - fix a memory leak in the nvme-pci probe teardown path (Irvin Cote)
 - repair the MAINTAINERS entry (Lukas Bulwahn)
 - fix handling single range discard request (Ming Lei)
 - show more opcode names in trace events (Minwoo Im)
 - fix nvme-tcp timeout reporting (Sagi Grimberg)"

* tag 'nvme-6.3-2022-03-16' of git://git.infradead.org/nvme:
  nvmet: avoid potential UAF in nvmet_req_complete()
  nvme-trace: show more opcode names
  nvme-tcp: add nvme-tcp pdu size build protection
  nvme-tcp: fix opcode reporting in the timeout handler
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000
  nvme-pci: fixing memory leak in probe teardown path
  nvme: fix handling single range discard request
  MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS

x86/mm: Fix use of uninitialized buffer in sme_enable()

cmdline_find_option() may fail before doing any initialization of
the buffer array. This may lead to unpredictable results when the same
buffer is used later in calls to strncmp() function.  Fix the issue by
returning early if cmdline_find_option() returns an error.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: aca20d546214 ("x86/mm: Add support to make use of Secure Memory Encryption")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230306160656.14844-1-n.zhandarovich@fintech.ru

xen: remove unnecessary (void*) conversions

Pointer variables of void * type do not require type cast.

Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230316083954.4223-1-yuzhe@nfschina.com
Signed-off-by: Juergen Gross <jgross@suse.com>

Merge tag 'icc-6.3-rc3' of git://git./linux/kernel/git/djakov/icc into char-misc-linus

Georgi writes:

interconnect fixes for v6.3-rc

This contains a bunch of fixes with the highlight being fixes for a race
condition that could sometimes occur during the interconnect provider
driver registration. There are also fixes for memory overallocation and
a memory leak.

- interconnect: qcom: osm-l3: fix icc_onecell_data allocation
- interconnect: qcom: sm8450: switch to qcom_icc_rpmh_* function
- interconnect: qcom: sm8550: switch to qcom_icc_rpmh_* function
- interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT
- interconnect: fix mem leak when freeing nodes
- interconnect: fix icc_provider_del() error handling
- interconnect: fix provider registration API
- interconnect: imx: fix registration race
- interconnect: qcom: osm-l3: fix registration race
- interconnect: qcom: rpm: fix probe child-node error handling
- interconnect: qcom: rpm: fix registration race
- interconnect: qcom: rpmh: fix probe child-node error handling
- interconnect: qcom: rpmh: fix registration race
- interconnect: qcom: msm8974: fix registration race
- interconnect: exynos: fix node leak in probe PM QoS error path
- interconnect: exynos: fix registration race
- interconnect: exynos: drop redundant link destroy
- memory: tegra: fix interconnect registration race
- memory: tegra124-emc: fix interconnect registration race
- memory: tegra20-emc: fix interconnect registration race
- memory: tegra30-emc: fix interconnect registration race

Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: (21 commits)
  memory: tegra30-emc: fix interconnect registration race
  memory: tegra20-emc: fix interconnect registration race
  memory: tegra124-emc: fix interconnect registration race
  memory: tegra: fix interconnect registration race
  interconnect: exynos: drop redundant link destroy
  interconnect: exynos: fix registration race
  interconnect: exynos: fix node leak in probe PM QoS error path
  interconnect: qcom: msm8974: fix registration race
  interconnect: qcom: rpmh: fix registration race
  interconnect: qcom: rpmh: fix probe child-node error handling
  interconnect: qcom: rpm: fix registration race
  interconnect: qcom: rpm: fix probe child-node error handling
  interconnect: qcom: osm-l3: fix registration race
  interconnect: imx: fix registration race
  interconnect: fix provider registration API
  interconnect: fix icc_provider_del() error handling
  interconnect: fix mem leak when freeing nodes
  interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT
  interconnect: qcom: sm8550: switch to qcom_icc_rpmh_* function
  interconnect: qcom: sm8450: switch to qcom_icc_rpmh_* function
  ...

ata: pata_parport: fix memory leaks

When ida_alloc() fails, "pi" is not freed although the misleading
comment says otherwise.
Move the ida_alloc() call up so we really don't have to free "pi" in
case of ida_alloc() failure.

Also move ida_free() call from pi_remove_one() to
pata_parport_dev_release(). It was dereferencing already freed dev
pointer.

Testing revealed leak even in non-failure case which was tracked down
to missing put_device() call after bus_find_device_by_name(). As a
result, pata_parport_dev_release() was never called.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202303111822.IHNchbkp-lkp@intel.com/
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

net: phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()

Since the blamed commit, phy_ethtool_get_wol() and phy_ethtool_set_wol()
acquire phydev->lock, but the mscc phy driver implementations,
vsc85xx_wol_get() and vsc85xx_wol_set(), acquire the same lock as well,
resulting in a deadlock.

$ ip link set swp3 down
============================================
WARNING: possible recursive locking detected
mscc_felix 0000:00:00.5 swp3: Link is Down
--------------------------------------------
ip/375 is trying to acquire lock:
ffff3d7e82e987a8 (&dev->lock){+.+.}-{4:4}, at: vsc85xx_wol_get+0x2c/0xf4

but task is already holding lock:
ffff3d7e82e987a8 (&dev->lock){+.+.}-{4:4}, at: phy_ethtool_get_wol+0x3c/0x6c

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&dev->lock);
  lock(&dev->lock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

2 locks held by ip/375:
 #0: ffffd43b2a955788 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg+0x144/0x58c
 #1: ffff3d7e82e987a8 (&dev->lock){+.+.}-{4:4}, at: phy_ethtool_get_wol+0x3c/0x6c

Call trace:
 __mutex_lock+0x98/0x454
 mutex_lock_nested+0x2c/0x38
 vsc85xx_wol_get+0x2c/0xf4
 phy_ethtool_get_wol+0x50/0x6c
 phy_suspend+0x84/0xcc
 phy_state_machine+0x1b8/0x27c
 phy_stop+0x70/0x154
 phylink_stop+0x34/0xc0
 dsa_port_disable_rt+0x2c/0xa4
 dsa_slave_close+0x38/0xec
 __dev_close_many+0xc8/0x16c
 __dev_change_flags+0xdc/0x218
 dev_change_flags+0x24/0x6c
 do_setlink+0x234/0xea4
 __rtnl_newlink+0x46c/0x878
 rtnl_newlink+0x50/0x7c
 rtnetlink_rcv_msg+0x16c/0x58c

Removing the mutex_lock(&phydev->lock) calls from the driver restores
the functionality.

Fixes: 2f987d486610 ("net: phy: Add locks to ethtool functions")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230314153025.2372970-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

veth: Fix use after free in XDP_REDIRECT

Commit 718a18a0c8a6 ("veth: Rework veth_xdp_rcv_skb in order
to accept non-linear skb") introduced a bug where it tried to
use pskb_expand_head() if the headroom was less than
XDP_PACKET_HEADROOM.  This however uses kmalloc to expand the head,
which will later allow consume_skb() to free the skb while is it still
in use by AF_XDP.

Previously if the headroom was less than XDP_PACKET_HEADROOM we
continued on to allocate a new skb from pages so this restores that
behavior.

BUG: KASAN: use-after-free in __xsk_rcv+0x18d/0x2c0
Read of size 78 at addr ffff888976250154 by task napi/iconduit-g/148640

CPU: 5 PID: 148640 Comm: napi/iconduit-g Kdump: loaded Tainted: G           O       6.1.4-cloudflare-kasan-2023.1.2 #1
Hardware name: Quanta Computer Inc. QuantaPlex T41S-2U/S2S-MB, BIOS S2S_3B10.03 06/21/2018
Call Trace:
  <TASK>
  dump_stack_lvl+0x34/0x48
  print_report+0x170/0x473
  ? __xsk_rcv+0x18d/0x2c0
  kasan_report+0xad/0x130
  ? __xsk_rcv+0x18d/0x2c0
  kasan_check_range+0x149/0x1a0
  memcpy+0x20/0x60
  __xsk_rcv+0x18d/0x2c0
  __xsk_map_redirect+0x1f3/0x490
  ? veth_xdp_rcv_skb+0x89c/0x1ba0 [veth]
  xdp_do_redirect+0x5ca/0xd60
  veth_xdp_rcv_skb+0x935/0x1ba0 [veth]
  ? __netif_receive_skb_list_core+0x671/0x920
  ? veth_xdp+0x670/0x670 [veth]
  veth_xdp_rcv+0x304/0xa20 [veth]
  ? do_xdp_generic+0x150/0x150
  ? veth_xdp_rcv_one+0xde0/0xde0 [veth]
  ? _raw_spin_lock_bh+0xe0/0xe0
  ? newidle_balance+0x887/0xe30
  ? __perf_event_task_sched_in+0xdb/0x800
  veth_poll+0x139/0x571 [veth]
  ? veth_xdp_rcv+0xa20/0xa20 [veth]
  ? _raw_spin_unlock+0x39/0x70
  ? finish_task_switch.isra.0+0x17e/0x7d0
  ? __switch_to+0x5cf/0x1070
  ? __schedule+0x95b/0x2640
  ? io_schedule_timeout+0x160/0x160
  __napi_poll+0xa1/0x440
  napi_threaded_poll+0x3d1/0x460
  ? __napi_poll+0x440/0x440
  ? __kthread_parkme+0xc6/0x1f0
  ? __napi_poll+0x440/0x440
  kthread+0x2a2/0x340
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x22/0x30
  </TASK>

Freed by task 148640:
  kasan_save_stack+0x23/0x50
  kasan_set_track+0x21/0x30
  kasan_save_free_info+0x2a/0x40
  ____kasan_slab_free+0x169/0x1d0
  slab_free_freelist_hook+0xd2/0x190
  __kmem_cache_free+0x1a1/0x2f0
  skb_release_data+0x449/0x600
  consume_skb+0x9f/0x1c0
  veth_xdp_rcv_skb+0x89c/0x1ba0 [veth]
  veth_xdp_rcv+0x304/0xa20 [veth]
  veth_poll+0x139/0x571 [veth]
  __napi_poll+0xa1/0x440
  napi_threaded_poll+0x3d1/0x460
  kthread+0x2a2/0x340
  ret_from_fork+0x22/0x30

The buggy address belongs to the object at ffff888976250000
  which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 340 bytes inside of
  2048-byte region [ffff888976250000, ffff888976250800)

The buggy address belongs to the physical page:
page:00000000ae18262a refcount:2 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x976250
head:00000000ae18262a order:3 compound_mapcount:0 compound_pincount:0
flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004cf00
raw: 0000000000000000 0000000080080008 00000002ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff888976250000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff888976250080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff888976250100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                  ^
  ffff888976250180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff888976250200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 718a18a0c8a6 ("veth: Rework veth_xdp_rcv_skb in order to accept non-linear skb")
Signed-off-by: Shawn Bohrer <sbohrer@cloudflare.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@kernel.org>
Link: https://lore.kernel.org/r/20230314153351.2201328-1-sbohrer@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

hwmon: (ltc2992) Set `can_sleep` flag for GPIO chip

The ltc2992 drivers uses a mutex and I2C bus access in its GPIO chip `set`
and `get` implementation. This means these functions can sleep and the GPIO
chip should set the `can_sleep` property to true.

This will ensure that a warning is printed when trying to set or get the
GPIO value from a context that potentially can't sleep.

Fixes: 9ca26df1ba25 ("hwmon: (ltc2992) Add support for GPIOs.")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230314093146.2443845-2-lars@metafoo.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (adm1266) Set `can_sleep` flag for GPIO chip

The adm1266 driver uses I2C bus access in its GPIO chip `set` and `get`
implementation. This means these functions can sleep and the GPIO chip
should set the `can_sleep` property to true.

This will ensure that a warning is printed when trying to set or get the
GPIO value from a context that potentially can't sleep.

Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230314093146.2443845-1-lars@metafoo.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

io_uring: rsrc: Optimize return value variable 'ret'

The initialization assignment of the variable ret is changed to 0, only
in 'goto fail;' Use the ret variable as the function return value.

Signed-off-by: Li zeming <zeming@nfschina.com>
Link: https://lore.kernel.org/r/20230317182538.3027-1-zeming@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

net/mlx5e: TC, Remove error message log print

The cited commit attempts to update the hw stats when dumping tc actions.
However, the driver may be called to update the stats of a police action
that may not be in hardware. In such cases the driver will fail to lookup
the police action object and will output an error message both to extack
and dmesg. The dmesg error is confusing as it may not indicate an actual
error.

Remove the dmesg error.

Fixes: 2b68d659a704 ("net/mlx5e: TC, support per action stats")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: TC, fix cloned flow attribute

Currently the cloned flow attr resets the original tc action cookies
count.
Fix that by resetting the cloned flow attribute.

Fixes: cca7eac13856 ("net/mlx5e: TC, store tc action cookies per attr")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: TC, fix missing error code

Missing error code when mlx5e_tc_act_stats_create fails

Fixes: d13674b1d14c ("net/mlx5e: TC, map tc action cookie to a hw counter")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/sched: TC, fix raw counter initialization

Freed counters may be reused by fs core.
As such, raw counters may not be initialized to zero.

Cache the counter values when the action stats object is initialized to
have a proper base value for calculating the difference from the previous
query.

Fixes: 2b68d659a704 ("net/mlx5e: TC, support per action stats")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Lower maximum allowed MTU in XSK to match XDP prerequisites

XSK redirecting XDP programs require linearity, hence applies
restrictions on the MTU. For PAGE_SIZE=4K, MTU shouldn't exceed 3498.

Features that contradict with XDP such HW-LRO and HW-GRO are enforced
by the driver in advance, during XSK params validation, except for MTU,
which was not enforced before this patch.

This has been spotted during test scenario described below:
Attaching xdpsock program (PAGE_SIZE=4K), with MTU < 3498, detaching
XDP program, changing the MTU to arbitrary value in the range
[3499, 3754], attaching XDP program again, which ended up with failure
since MTU is > 3498.

This commit lowers the XSK MTU limitation to be aligned with XDP MTU
limitation, since XSK socket is meaningless without XDP program.

Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Set BREAK_FW_WAIT flag first when removing driver

Currently, BREAK_FW_WAIT flag is set after syncing with fw_reset.
However, fw_reset can call mlx5_load_one() which is waiting for fw
init bit and BREAK_FW_WAIT flag is intended to stop. e.g.: the driver
might wait on a loop it should exit.
Fix it by setting the flag before syncing with fw_reset.

Fixes: 8324a02c342a ("net/mlx5: Add exit route when waiting for FW")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: kTLS, Fix missing error unwind on unsupported cipher type

Do proper error unwinding when adding an unsupported TX/RX cipher type.
Move the switch case prior to key creation so there's less to unwind,
and change the goto label name to describe the action performed instead
of what failed.

Fixes: 4960c414db35 ("net/mlx5e: Support 256 bit keys with kTLS device offload")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Fix cleanup null-ptr deref on encap lock

During module is unloaded while a peer tc flow is still offloaded,
first the peer uplink rep profile is changed to a nic profile, and so
neigh encap lock is destroyed. Next during unload, the VF reps netdevs
are unregistered which causes the original non-peer tc flow to be deleted,
which deletes the peer flow. The peer flow deletion detaches the encap
entry and try to take the already destroyed encap lock, causing the
below trace.

Fix this by clearing peer flows during tc eswitch cleanup
(mlx5e_tc_esw_cleanup()).

Relevant trace:
[ 4316.837128] BUG: kernel NULL pointer dereference, address: 00000000000001d8
[ 4316.842239] RIP: 0010:__mutex_lock+0xb5/0xc40
[ 4316.851897] Call Trace:
[ 4316.852481]  <TASK>
[ 4316.857214]  mlx5e_rep_neigh_entry_release+0x93/0x790 [mlx5_core]
[ 4316.858258]  mlx5e_rep_encap_entry_detach+0xa7/0xf0 [mlx5_core]
[ 4316.859134]  mlx5e_encap_dealloc+0xa3/0xf0 [mlx5_core]
[ 4316.859867]  clean_encap_dests.part.0+0x5c/0xe0 [mlx5_core]
[ 4316.860605]  mlx5e_tc_del_fdb_flow+0x32a/0x810 [mlx5_core]
[ 4316.862609]  __mlx5e_tc_del_fdb_peer_flow+0x1a2/0x250 [mlx5_core]
[ 4316.863394]  mlx5e_tc_del_flow+0x(/0x630 [mlx5_core]
[ 4316.864090]  mlx5e_flow_put+0x5f/0x100 [mlx5_core]
[ 4316.864771]  mlx5e_delete_flower+0x4de/0xa40 [mlx5_core]
[ 4316.865486]  tc_setup_cb_reoffload+0x20/0x80
[ 4316.865905]  fl_reoffload+0x47c/0x510 [cls_flower]
[ 4316.869181]  tcf_block_playback_offloads+0x91/0x1d0
[ 4316.869649]  tcf_block_unbind+0xe7/0x1b0
[ 4316.870049]  tcf_block_offload_cmd.isra.0+0x1ee/0x270
[ 4316.879266]  tcf_block_offload_unbind+0x61/0xa0
[ 4316.879711]  __tcf_block_put+0xa4/0x310

Fixes: 04de7dda7394 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows")
Fixes: 1418ddd96afd ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: E-switch, Fix missing set of split_count when forward to ovs internal port

Rules with mirror actions are split to two FTEs when the actions after the mirror
action contains pedit, vlan push/pop or ct. Forward to ovs internal port adds
implicit header rewrite (pedit) but missing trigger to do split.

Fix by setting split_count when forwarding to ovs internal port which
will trigger split in mirror rules.

Fixes: 27484f7170ed ("net/mlx5e: Offload tc rules that redirect to ovs internal port")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: E-switch, Fix wrong usage of source port rewrite in split rules

In few cases, rules with mirror use case are split to two FTEs, one which
do the mirror action and forward to second FTE which do the rest of the rule
actions and the second redirect action.
In case of mirror rules which do split and forward to ovs internal port or
VF stack devices, source port rewrite should be used in the second FTE but
it is wrongly also set in the first FTE which break the offload.

Fix this issue by removing the wrong check if source port rewrite is needed to
be used on the first FTE of the split and instead return EOPNOTSUPP which will
block offload of rules which mirror to ovs internal port or VF stack devices
which isn't supported.

Fixes: 10742efc20a4 ("net/mlx5e: VF tunnel TX traffic offloading")
Fixes: a508728a4c8b ("net/mlx5e: VF tunnel RX traffic offloading")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Disable eswitch before waiting for VF pages

The offending commit changed the ordering of moving to legacy mode and
waiting for the VF pages. Moving to legacy mode is important in
bluefield, because it sends the host driver into error state, and frees
its pages. Without this transition we end up waiting 2 minutes for
pages that aren't coming before carrying on with the unload process.

Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Fix setting ec_function bit in MANAGE_PAGES

When ECPF is a page supplier, reclaim pages missed to honor the
ec_function bit provided by the firmware. It always used the ec_function
to true during driver unload flow for ECPF. This is incorrect.

Honor the ec_function bit provided by device during page allocation
request event.

Fixes: d6945242f45d ("net/mlx5: Hold pages RB tree per VF")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Don't cache tunnel offloads capability

When mlx5e attaches again after device health recovery, the device
capabilities might have changed by the eswitch manager.

For example in one flow when ECPF changes the eswitch mode between
legacy and switchdev, it updates the flow table tunnel capability.

The cached value is only used in one place, so just check the capability
there instead.

Fixes: 5bef709d76a2 ("net/mlx5: Enable host PF HCA after eswitch is initialized")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Fix macsec ASO context alignment

Currently mlx5e_macsec_umr struct does not satisfy hardware memory
alignment requirement. Hence the result of querying advanced steering
operation (ASO) is not copied to the memory region as expected.

Fix by satisfying hardware memory alignment requirement and move
context to be first field in struct for better readability.

Fixes: 1f53da676439 ("net/mlx5e: Create advanced steering operation (ASO) object for MACsec")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

drm/amdgpu: Don't resume IOMMU after incomplete init

Check kfd->init_complete in kgd2kfd_iommu_resume, consistent with other
kgd2kfd calls. This should fix IOMMU errors on resume from suspend when
KFD IOMMU initialization failed.

Reported-by: Matt Fagnani <matt.fagnani@bell.net>
Link: https://lore.kernel.org/r/4a3b225c-2ffd-e758-4de1-447375e34cad@bell.net/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217170
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2454
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Linux regression tracking (Thorsten Leemhuis) <regressions@leemhuis.info>
Cc: stable@vger.kernel.org
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Matt Fagnani <matt.fagnani@bell.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fixed kfd_process cleanup on module exit.

Handle case when module is unloaded (kfd_exit) before a process space
(mm_struct) is released.

v2: Fixed potential race conditions by removing all kfd_process from
the process table first, then working on releasing the resources.

v3: Fixed loop element access / synchronization.  Fixed extra empty lines.

Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

x86/resctrl: Clear staged_config[] before and after it is used

As a temporary storage, staged_config[] in rdt_domain should be cleared
before and after it is used. The stale value in staged_config[] could
cause an MSR access error.

Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3
Cache (MBA should be disabled if the number of CLOSIDs for MB is less than
16.) :
mount -t resctrl resctrl -o cdp /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..7}
umount /sys/fs/resctrl/
mount -t resctrl resctrl /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..8}

An error occurs when creating resource group named p8:
    unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60)
    Call Trace:
     <IRQ>
     __flush_smp_call_function_queue+0x11d/0x170
     __sysvec_call_function+0x24/0xd0
     sysvec_call_function+0x89/0xc0
     </IRQ>
     <TASK>
     asm_sysvec_call_function+0x16/0x20

When creating a new resource control group, hardware will be configured
by the following process:
    rdtgroup_mkdir()
      rdtgroup_mkdir_ctrl_mon()
        rdtgroup_init_alloc()
          resctrl_arch_update_domains()

resctrl_arch_update_domains() iterates and updates all resctrl_conf_type
whose have_new_ctrl is true. Since staged_config[] holds the same values as
when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA
configurations. When group p8 is created, get_config_index() called in
resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for
CDP_CODE and CDP_DATA, which will be translated to an invalid register -
0xca0 in this scenario.

Fix it by clearing staged_config[] before and after it is used.

[reinette: re-order commit tags]

Fixes: 75408e43509e ("x86/resctrl: Allow different CODE/DATA configurations to be staged")
Suggested-by: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Shawn Wang <shawnwang@linux.alibaba.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/2fad13f49fbe89687fc40e9a5a61f23a28d1507a.1673988935.git.reinette.chatre%40intel.com

drm/amd/display: disconnect MPCC only on OTG change

[Why]
Framedrops are observed while playing Vp9 and Av1 10 bit
video on 8k resolution using VSR while playback controls
are disappeared/appeared

[How]
Now ODM 2 to 1 is disabled for 5k or greater resolutions on VSR.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ayush Gupta <ayugupta@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DP MST sinks removal issue

[Why]
In USB4 DP tunneling, it's possible to have this scenario that
the path becomes unavailable and CM tears down the path a little bit late.
So, in this case, the HPD is high but fails to read any DPCD register.
That causes the link connection type to be set to sst.
And not all sinks are removed behind the MST branch.

[How]
Restore the link connection type if it fails to read DPCD register.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Do not set DRR on pipe Commit

[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove OTG DIV register write for Virtual signals.

[WHY]
Hot plugging and then hot unplugging leads to k1 and k2 values to
change, as signal is detected as a virtual signal on hot unplug. Writing
these values to OTG_PIXEL_RATE_DIV register might cause primary display
to blank (known hw bug).

[HOW]
No longer write k1 and k2 values to register if signal is virtual, we
have safe guards in place in the case that k1 and k2 is unassigned so
that an unknown value is not written to the register either.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

perf: Fix check before add_event_to_groups() in perf_group_detach()

Events should only be added to a groups rb tree if they have not been
removed from their context by list_del_event(). Since remove_on_exec
made it possible to call list_del_event() on individual events before
they are detached from their group, perf_group_detach() should check each
sibling's attach_state before calling add_event_to_groups() on it.

Fixes: 2e498d0a74e5 ("perf: Add support for event removal on exec")
Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/ZBFzvQV9tEqoHEtH@gentoo

perf: fix perf_event_context->time

Time readers rely on perf_event_context->[time|timestamp|timeoffset] to get
accurate time_enabled and time_running for an event. The difference between
ctx->timestamp and ctx->time is the among of time when the context is not
enabled. __update_context_time(ctx, false) is used to increase timestamp,
but not time. Therefore, it should only be called in ctx_sched_in() when
EVENT_TIME was not enabled.

Fixes: 09f5e7dc7ad7 ("perf: Fix perf_event_read_local() time")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20230313171608.298734-1-song@kernel.org

perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output

syzkaller reportes a KASAN issue with stack-out-of-bounds.
The call trace is as follows:
  dump_stack+0x9c/0xd3
  print_address_description.constprop.0+0x19/0x170
  __kasan_report.cold+0x6c/0x84
  kasan_report+0x3a/0x50
  __perf_event_header__init_id+0x34/0x290
  perf_event_header__init_id+0x48/0x60
  perf_output_begin+0x4a4/0x560
  perf_event_bpf_output+0x161/0x1e0
  perf_iterate_sb_cpu+0x29e/0x340
  perf_iterate_sb+0x4c/0xc0
  perf_event_bpf_event+0x194/0x2c0
  __bpf_prog_put.constprop.0+0x55/0xf0
  __cls_bpf_delete_prog+0xea/0x120 [cls_bpf]
  cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf]
  process_one_work+0x3c2/0x730
  worker_thread+0x93/0x650
  kthread+0x1b8/0x210
  ret_from_fork+0x1f/0x30

commit 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()")
use on-stack struct perf_sample_data of the caller function.

However, perf_event_bpf_output uses incorrect parameter to convert
small-sized data (struct perf_bpf_event) into large-sized data
(struct perf_sample_data), which causes memory overwriting occurs in
__perf_event_header__init_id.

Fixes: 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230314044735.56551-1-yangjihong1@huawei.com

Merge tag 'linux-kselftest-fixes-6.3-rc3' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "A fix to amd-pstate test Makefile and a fix to LLVM build for x86 in
  kselftest common lib.mk"

* tag 'linux-kselftest-fixes-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: fix LLVM build for i386 and x86_64
  selftests: amd-pstate: fix TEST_FILES

Merge branch 'md-fixes' of https://git./linux/kernel/git/song/md into block-6.3

Pull MD fixes from Song:

"This set contains two fixes for old issues (by Neil) and one fix
 for 6.3 (by Xiao)."

* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: select BLOCK_LEGACY_AUTOLOAD
  md: avoid signed overflow in slot_store()
  md: Free resources in __md_stop

md: select BLOCK_LEGACY_AUTOLOAD

When BLOCK_LEGACY_AUTOLOAD is not enable, mdadm is not able to
activate new arrays unless "CREATE names=yes" appears in
mdadm.conf

As this is a regression we need to always enable BLOCK_LEGACY_AUTOLOAD
for when MD is selected - at least until mdadm is updated and the
updates widely available.

Cc: stable@vger.kernel.org # v5.18+
Fixes: fbdee71bb5d8 ("block: deprecate autoloading based on dev_t")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <song@kernel.org>

block: count 'ios' and 'sectors' when io is done for bio-based device

While using iostat for raid, I observed very strange 'await'
occasionally, and turns out it's due to that 'ios' and 'sectors' is
counted in bdev_start_io_acct(), while 'nsecs' is counted in
bdev_end_io_acct(). I'm not sure why they are ccounted like that
but I think this behaviour is obviously wrong because user will get
wrong disk stats.

Fix the problem by counting 'ios' and 'sectors' when io is done, like
what rq-based device does.

Fixes: 394ffa503bc4 ("blk: introduce generic io stat accounting help function")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230223091226.1135678-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: sunvdc: add check for mdesc_grab() returning NULL

In vdc_port_probe(), we should check the return value of mdesc_grab() as
it may return NULL, which can cause potential NPD bug.

Fixes: 43fdf27470b2 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20230315062032.1741692-1-windhl@126.com
[axboe: style cleanup]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvmet: avoid potential UAF in nvmet_req_complete()

An nvme target ->queue_response() operation implementation may free the
request passed as argument. Such implementation potentially could result
in a use after free of the request pointer when percpu_ref_put() is
called in nvmet_req_complete().

Avoid such problem by using a local variable to save the sq pointer
before calling __nvmet_req_complete(), thus avoiding dereferencing the
req pointer after that function call.

Fixes: a07b4970f464 ("nvmet: add a generic NVMe target")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-trace: show more opcode names

We have more commands to show in the trace. Sync up.

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-tcp: add nvme-tcp pdu size build protection

Make sure that we don't somehow mess up the wire structures in the spec.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kkch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-tcp: fix opcode reporting in the timeout handler

For non in-capsule writes we reuse the request pdu space for a h2cdata
pdu in order to avoid over allocating space (either preallocate or
dynamically upon receving an r2t pdu). However if the request times out
the core expects to find the opcode in the start of the request, which
we override.

In order to prevent that, without sacrificing additional 24 bytes per
request, we just use the tail of the command pdu space instead (last
24 bytes from the 72 bytes command pdu). That should make the command
opcode always available, and we get away from allocating more space.

If in the future we would need the last 24 bytes of the nvme command
available we would need to allocate a dedicated space for it in the
request, but until then we can avoid doing so.

Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kkch@nvidia.com>
Tested-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620

Added a quirk to fix Lexar NM620 1TB SSD reporting duplicate NGUIDs.

Signed-off-by: Philipp Geulen <p.geulen@js-elektronik.de>
Reviewed-by: Chaitanya Kulkarni <kkch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000

Added a quirk to fix the Netac NV3000 SSD reporting duplicate NGUIDs.

Cc: <stable@vger.kernel.org>
Signed-off-by: Elmer Miroslav Mosher Golovin <miroslav@mishamosher.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-pci: fixing memory leak in probe teardown path

In case the nvme_probe teardown path is triggered the ctrl ref count does
not reach 0 thus creating a memory leak upon failure of nvme_probe.

Signed-off-by: Irvin Cote <irvincoteg@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: fix handling single range discard request

When investigating one customer report on warning in nvme_setup_discard,
we observed the controller(nvme/tcp) actually exposes
queue_max_discard_segments(req->q) == 1.

Obviously the current code can't handle this situation, since contiguity
merge like normal RW request is taken.

Fix the issue by building range from request sector/nr_sectors directly.

Fixes: b35ba01ea697 ("nvme: support ranged discard requests")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS

The T: entries shall be composed of a SCM tree type (git, hg, quilt, stgit
or topgit) and location.

Add the SCM tree type to the T: entry, and reorder the file entries in
alphabetical order.

Fixes: b508fc354f6d ("nvme: update maintainers information")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

io_uring/sqpoll: Do not set PF_NO_SETAFFINITY on sqpoll threads

Users may specify a CPU where the sqpoll thread would run. This may
conflict with cpuset operations because of strict PF_NO_SETAFFINITY
requirement. That flag is unnecessary for polling "kernel" threads, see
the reasoning in commit 01e68ce08a30 ("io_uring/io-wq: stop setting
PF_NO_SETAFFINITY on io-wq workers"). Drop the flag on poll threads too.

Fixes: 01e68ce08a30 ("io_uring/io-wq: stop setting PF_NO_SETAFFINITY on io-wq workers")
Link: https://lore.kernel.org/all/20230314162559.pnyxdllzgw7jozgx@blackpad/
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20230314183332.25834-1-mkoutny@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: null_blk: cleanup null_queue_rq()

Use a local struct request pointer variable to avoid having to
dereference struct blk_mq_queue_data multiple times. While at it, also
fix the function argument indentation and remove a useless "else" after
a return.

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20230314041106.19173-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: null_blk: Fix handling of fake timeout request

When injecting a fake timeout into the null_blk driver using
fail_io_timeout, the request timeout handler does not execute
blk_mq_complete_request(), so the complete callback is never executed
for a timedout request.

The null_blk driver also has a driver-specific fake timeout mechanism
which does not have this problem. Fix the problem with fail_io_timeout
by using the same meachanism as null_blk internal timeout feature, using
the fake_timeout field of null_blk commands.

Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Fixes: de3510e52b0a ("null_blk: fix command timeout completion handling")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230314041106.19173-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

powerpc/mm: Fix false detection of read faults

To support detection of read faults with Radix execute-only memory, the
vma_is_accessible() check in access_error() (which checks for PROT_NONE)
was replaced with a check to see if VM_READ was missing, and if so,
returns true to assert the fault was caused by a bad read.

This is incorrect, as it ignores that both VM_WRITE and VM_EXEC imply
read on powerpc, as defined in protection_map[].  This causes mappings
containing VM_WRITE or VM_EXEC without VM_READ to misreport the cause of
page faults, since the MMU is still allowing reads.

Correct this by restoring the original vma_is_accessible() check for
PROT_NONE mappings, and adding a separate check for Radix PROT_EXEC-only
mappings.

Fixes: 395cac7752b9 ("powerpc/mm: Support execute-only memory on the Radix MMU")
Reported-by: Michal Suchánek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/20230308152702.GR19419@kitsune.suse.cz
Tested-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310050834.63105-1-ruscur@russell.cc

drm/meson: dw-hdmi: Fix devm_regulator_*get_enable*() conversion again

devm_regulator_get_enable_optional() returns -ENODEV if requested
optional regulator is not present. Adjust code for that, because in the
67d0a30128c9 I've incorrectly assumed that it also returns 0 when
regulator is not present.

Reported-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Fixes: 67d0a30128c9 ("drm/meson: dw-hdmi: Fix devm_regulator_*get_enable*() conversion")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309152446.104913-1-m.szyprowski@samsung.com

drm/bridge: Fix returned array size name for atomic_get_input_bus_fmts kdoc

The returned array size for input formats is set through
atomic_get_input_bus_fmts()'s 'num_input_fmts' argument, so use
'num_input_fmts' to represent the array size in the function's kdoc,
not 'num_output_fmts'.

Fixes: 91ea83306bfa ("drm/bridge: Fix the bridge kernel doc")
Fixes: f32df58acc68 ("drm/bridge: Add the necessary bits to support bus format negotiation")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314055035.3731179-1-victor.liu@nxp.com

Merge branch 'mtk_eth_soc-SGMII-fixes'

Daniel Golle says:

====================
net: ethernet: mtk_eth_soc: minor SGMII fixes

This small series brings two minor fixes for the SGMII unit found in
MediaTek's router SoCs.

The first patch resets the PCS internal state machine on major
configuration changes, just like it is also done in MediaTek's SDK.

The second patch makes sure we only write values and restart AN if
actually needed, thus preventing unnesseray loss of an existing link
in some cases.

Both patches have previously been submitted as part of the series
"net: ethernet: mtk_eth_soc: various enhancements" which grew a bit
too big and it has correctly been criticized that some of the patches
should rather go as fixes to net-next.

This new series tries to address this.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_soc: only write values if needed

Only restart auto-negotiation and write link timer if actually
necessary. This prevents losing the link in case of minor
changes.

Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_soc: reset PCS state

Reset the internal PCS state machine when changing interface mode.
This prevents confusing the state machine when changing interface
modes, e.g. from SGMII to 2500Base-X or vice-versa.

Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: smsc75xx: Limit packet length to skb->len

Packet length retrieved from skb data may be larger than
the actual socket buffer length (up to 9026 bytes). In such
case the cloned skb passed up the network stack will leak
kernel memory contents.

Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-smc-fixes'

Wenjia Zhang says:

====================
net/smc: Fixes 2023-03-01

The 1st patch solves the problem that CLC message initialization was
not properly reversed in error handling path. And the 2nd one fixes
the possible deadlock triggered by cancel_delayed_work_sync().
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: Fix device de-init sequence

CLC message initialization was not properly reversed in error handling path.

Reported-and-suggested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: fix deadlock triggered by cancel_delayed_work_syn()

The following LOCKDEP was detected:
Workqueue: events smc_lgr_free_work [smc]
WARNING: possible circular locking dependency detected
6.1.0-20221027.rc2.git8.56bc5b569087.300.fc36.s390x+debug #1 Not tainted
------------------------------------------------------
kworker/3:0/176251 is trying to acquire lock:
00000000f1467148 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0},
at: __flush_workqueue+0x7a/0x4f0
but task is already holding lock:
0000037fffe97dc8 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0},
at: process_one_work+0x232/0x730
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}:
       __lock_acquire+0x58e/0xbd8
       lock_acquire.part.0+0xe2/0x248
       lock_acquire+0xac/0x1c8
       __flush_work+0x76/0xf0
       __cancel_work_timer+0x170/0x220
       __smc_lgr_terminate.part.0+0x34/0x1c0 [smc]
       smc_connect_rdma+0x15e/0x418 [smc]
       __smc_connect+0x234/0x480 [smc]
       smc_connect+0x1d6/0x230 [smc]
       __sys_connect+0x90/0xc0
       __do_sys_socketcall+0x186/0x370
       __do_syscall+0x1da/0x208
       system_call+0x82/0xb0
-> #3 (smc_client_lgr_pending){+.+.}-{3:3}:
       __lock_acquire+0x58e/0xbd8
       lock_acquire.part.0+0xe2/0x248
       lock_acquire+0xac/0x1c8
       __mutex_lock+0x96/0x8e8
       mutex_lock_nested+0x32/0x40
       smc_connect_rdma+0xa4/0x418 [smc]
       __smc_connect+0x234/0x480 [smc]
       smc_connect+0x1d6/0x230 [smc]
       __sys_connect+0x90/0xc0
       __do_sys_socketcall+0x186/0x370
       __do_syscall+0x1da/0x208
       system_call+0x82/0xb0
-> #2 (sk_lock-AF_SMC){+.+.}-{0:0}:
       __lock_acquire+0x58e/0xbd8
       lock_acquire.part.0+0xe2/0x248
       lock_acquire+0xac/0x1c8
       lock_sock_nested+0x46/0xa8
       smc_tx_work+0x34/0x50 [smc]
       process_one_work+0x30c/0x730
       worker_thread+0x62/0x420
       kthread+0x138/0x150
       __ret_from_fork+0x3c/0x58
       ret_from_fork+0xa/0x40
-> #1 ((work_completion)(&(&smc->conn.tx_work)->work)){+.+.}-{0:0}:
       __lock_acquire+0x58e/0xbd8
       lock_acquire.part.0+0xe2/0x248
       lock_acquire+0xac/0x1c8
       process_one_work+0x2bc/0x730
       worker_thread+0x62/0x420
       kthread+0x138/0x150
       __ret_from_fork+0x3c/0x58
       ret_from_fork+0xa/0x40
-> #0 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}:
       check_prev_add+0xd8/0xe88
       validate_chain+0x70c/0xb20
       __lock_acquire+0x58e/0xbd8
       lock_acquire.part.0+0xe2/0x248
       lock_acquire+0xac/0x1c8
       __flush_workqueue+0xaa/0x4f0
       drain_workqueue+0xaa/0x158
       destroy_workqueue+0x44/0x2d8
       smc_lgr_free+0x9e/0xf8 [smc]
       process_one_work+0x30c/0x730
       worker_thread+0x62/0x420
       kthread+0x138/0x150
       __ret_from_fork+0x3c/0x58
       ret_from_fork+0xa/0x40
other info that might help us debug this:
Chain exists of:
  (wq_completion)smc_tx_wq-00000000#2
     --> smc_client_lgr_pending
  --> (work_completion)(&(&lgr->free_work)->work)
 Possible unsafe locking scenario:
       CPU0                    CPU1
       ----                    ----
  lock((work_completion)(&(&lgr->free_work)->work));
                   lock(smc_client_lgr_pending);
                   lock((work_completion)
(&(&lgr->free_work)->work));
  lock((wq_completion)smc_tx_wq-00000000#2);
 *** DEADLOCK ***
2 locks held by kworker/3:0/176251:
 #0: 0000000080183548
((wq_completion)events){+.+.}-{0:0},
at: process_one_work+0x232/0x730
 #1: 0000037fffe97dc8
((work_completion)
 (&(&lgr->free_work)->work)){+.+.}-{0:0},
at: process_one_work+0x232/0x730
stack backtrace:
CPU: 3 PID: 176251 Comm: kworker/3:0 Not tainted
Hardware name: IBM 8561 T01 701 (z/VM 7.2.0)
Call Trace:
 [<000000002983c3e4>] dump_stack_lvl+0xac/0x100
 [<0000000028b477ae>] check_noncircular+0x13e/0x160
 [<0000000028b48808>] check_prev_add+0xd8/0xe88
 [<0000000028b49cc4>] validate_chain+0x70c/0xb20
 [<0000000028b4bd26>] __lock_acquire+0x58e/0xbd8
 [<0000000028b4cf6a>] lock_acquire.part.0+0xe2/0x248
 [<0000000028b4d17c>] lock_acquire+0xac/0x1c8
 [<0000000028addaaa>] __flush_workqueue+0xaa/0x4f0
 [<0000000028addf9a>] drain_workqueue+0xaa/0x158
 [<0000000028ae303c>] destroy_workqueue+0x44/0x2d8
 [<000003ff8029af26>] smc_lgr_free+0x9e/0xf8 [smc]
 [<0000000028adf3d4>] process_one_work+0x30c/0x730
 [<0000000028adf85a>] worker_thread+0x62/0x420
 [<0000000028aeac50>] kthread+0x138/0x150
 [<0000000028a63914>] __ret_from_fork+0x3c/0x58
 [<00000000298503da>] ret_from_fork+0xa/0x40
INFO: lockdep is turned off.
===================================================================

This deadlock occurs because cancel_delayed_work_sync() waits for
the work(&lgr->free_work) to finish, while the &lgr->free_work
waits for the work(lgr->tx_wq), which needs the sk_lock-AF_SMC, that
is already used under the mutex_lock.

The solution is to use cancel_delayed_work() instead, which kills
off a pending work.

Fixes: a52bcc919b14 ("net/smc: improve termination processing")
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum: Fix incorrect parsing depth after reload

Spectrum ASICs have a configurable limit on how deep into the packet
they parse. By default, the limit is 96 bytes.

There are several cases where this parsing depth is not enough and there
is a need to increase it. For example, timestamping of PTP packets and a
FIB multipath hash policy that requires hashing on inner fields. The
driver therefore maintains a reference count that reflects the number of
consumers that require an increased parsing depth.

During reload_down() the parsing depth reference count does not
necessarily drop to zero, but the parsing depth itself is restored to
the default during reload_up() when the firmware is reset. It is
therefore possible to end up in situations where the driver thinks that
the parsing depth was increased (reference count is non-zero), when it
is not.

Fix by making sure that all the consumers that increase the parsing
depth reference count also decrease it during reload_down().
Specifically, make sure that when the routing code is de-initialized it
drops the reference count if it was increased because of a FIB multipath
hash policy that requires hashing on inner fields.

Add a warning if the reference count is not zero after the driver was
de-initialized and explicitly reset it to zero during initialization for
good measures.

Fixes: 2d91f0803b84 ("mlxsw: spectrum: Add infrastructure for parsing configuration")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/9c35e1b3e6c1d8f319a2449d14e2b86373f3b3ba.1678727526.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

veth: rely on rtnl_dereference() instead of on rcu_dereference() in veth_set_xdp_features()

Fix the following kernel warning in veth_set_xdp_features routine
relying on rtnl_dereference() instead of on rcu_dereference():

=============================
WARNING: suspicious RCU usage
6.3.0-rc1-00144-g064d70527aaa #149 Not tainted
-----------------------------
drivers/net/veth.c:1265 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/135:
(net/core/rtnetlink.c:6172)

stack backtrace:
CPU: 1 PID: 135 Comm: ip Not tainted 6.3.0-rc1-00144-g064d70527aaa #149
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1
04/01/2014
Call Trace:
 <TASK>
dump_stack_lvl (lib/dump_stack.c:107)
lockdep_rcu_suspicious (include/linux/context_tracking.h:152)
veth_set_xdp_features (drivers/net/veth.c:1265 (discriminator 9))
veth_newlink (drivers/net/veth.c:1892)
? veth_set_features (drivers/net/veth.c:1774)
? kasan_save_stack (mm/kasan/common.c:47)
? kasan_save_stack (mm/kasan/common.c:46)
? kasan_set_track (mm/kasan/common.c:52)
? alloc_netdev_mqs (include/linux/slab.h:737)
? rcu_read_lock_sched_held (kernel/rcu/update.c:125)
? trace_kmalloc (include/trace/events/kmem.h:54)
? __xdp_rxq_info_reg (net/core/xdp.c:188)
? alloc_netdev_mqs (net/core/dev.c:10657)
? rtnl_create_link (net/core/rtnetlink.c:3312)
rtnl_newlink_create (net/core/rtnetlink.c:3440)
? rtnl_link_get_net_capable.constprop.0 (net/core/rtnetlink.c:3391)
__rtnl_newlink (net/core/rtnetlink.c:3657)
? lock_downgrade (kernel/locking/lockdep.c:5321)
? rtnl_link_unregister (net/core/rtnetlink.c:3487)
rtnl_newlink (net/core/rtnetlink.c:3671)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6174)
? rtnl_link_fill (net/core/rtnetlink.c:6070)
? mark_usage (kernel/locking/lockdep.c:4914)
? mark_usage (kernel/locking/lockdep.c:4914)
netlink_rcv_skb (net/netlink/af_netlink.c:2574)
? rtnl_link_fill (net/core/rtnetlink.c:6070)
? netlink_ack (net/netlink/af_netlink.c:2551)
? lock_acquire (kernel/locking/lockdep.c:467)
? net_generic (include/linux/rcupdate.h:805)
? netlink_deliver_tap (include/linux/rcupdate.h:805)
netlink_unicast (net/netlink/af_netlink.c:1340)
? netlink_attachskb (net/netlink/af_netlink.c:1350)
netlink_sendmsg (net/netlink/af_netlink.c:1942)
? netlink_unicast (net/netlink/af_netlink.c:1861)
? netlink_unicast (net/netlink/af_netlink.c:1861)
sock_sendmsg (net/socket.c:727)
____sys_sendmsg (net/socket.c:2501)
? kernel_sendmsg (net/socket.c:2448)
? __copy_msghdr (net/socket.c:2428)
___sys_sendmsg (net/socket.c:2557)
? mark_usage (kernel/locking/lockdep.c:4914)
? do_recvmmsg (net/socket.c:2544)
? lock_acquire (kernel/locking/lockdep.c:467)
? find_held_lock (kernel/locking/lockdep.c:5159)
? __lock_release (kernel/locking/lockdep.c:5345)
? __might_fault (mm/memory.c:5625)
? lock_downgrade (kernel/locking/lockdep.c:5321)
? __fget_light (include/linux/atomic/atomic-arch-fallback.h:227)
__sys_sendmsg (include/linux/file.h:31)
? __sys_sendmsg_sock (net/socket.c:2572)
? rseq_get_rseq_cs (kernel/rseq.c:275)
? lockdep_hardirqs_on_prepare.part.0 (kernel/locking/lockdep.c:4263)
do_syscall_64 (arch/x86/entry/common.c:50)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7f0d1aadeb17
Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e
fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10

Fixes: fccca038f300 ("veth: take into account device reconfiguration for xdp_features flag")
Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/netdev/cover.1678364612.git.lorenzo@kernel.org/T/#me4c9d8e985ec7ebee981cfdb5bc5ec651ef4035d
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reported-by: syzbot+c3d0d9c42d59ff644ea6@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/dfd6a9a7d85e9113063165e1f47b466b90ad7b8a.1678748579.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: st-nci: Fix use after free bug in ndlc_remove due to race condition

This bug influences both st_nci_i2c_remove and st_nci_spi_remove.
Take st_nci_i2c_remove as an example.

In st_nci_i2c_probe, it called ndlc_probe and bound &ndlc->sm_work
with llt_ndlc_sm_work.

When it calls ndlc_recv or timeout handler, it will finally call
schedule_work to start the work.

When we call st_nci_i2c_remove to remove the driver, there
may be a sequence as follows:

Fix it by finishing the work before cleanup in ndlc_remove

CPU0                  CPU1

                    |llt_ndlc_sm_work
st_nci_i2c_remove   |
  ndlc_remove       |
     st_nci_remove  |
     nci_free_device|
     kfree(ndev)    |
//free ndlc->ndev   |
                    |llt_ndlc_rcv_queue
                    |nci_recv_frame
                    |//use ndlc->ndev

Fixes: 35630df68d60 ("NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chip")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312160837.2040857-1-zyytlz.wz@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tcp-fix-bind-regression-for-dual-stack-wildcard-address'

Kuniyuki Iwashima says:

====================
tcp: Fix bind() regression for dual-stack wildcard address.

The first patch fixes the regression reported in [0], and the second
patch adds a test for similar cases to catch future regression.

[0]: https://lore.kernel.org/netdev/e21bf153-80b0-9ec0-15ba-e04a4ad42c34@redhat.com/
====================

Link: https://lore.kernel.org/r/20230312031904.4674-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftest: Add test for bind() conflicts.

The test checks if (IPv4, IPv6) address pair properly conflict or not.

  * IPv4
    * 0.0.0.0
    * 127.0.0.1

  * IPv6
    * ::
    * ::1

If the IPv6 address is [::], the second bind() always fails.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: Fix bind() conflict check for dual-stack wildcard address.

Paul Holzinger reported [0] that commit 5456262d2baa ("net: Fix
incorrect address comparison when searching for a bind2 bucket")
introduced a bind() regression.  Paul also gave a nice repro that
calls two types of bind() on the same port, both of which now
succeed, but the second call should fail:

  bind(fd1, ::, port) + bind(fd2, 127.0.0.1, port)

The cited commit added address family tests in three functions to
fix the uninit-value KMSAN report. [1]  However, the test added to
inet_bind2_bucket_match_addr_any() removed a necessary conflict
check; the dual-stack wildcard address no longer conflicts with
an IPv4 non-wildcard address.

If tb->family is AF_INET6 and sk->sk_family is AF_INET in
inet_bind2_bucket_match_addr_any(), we still need to check
if tb has the dual-stack wildcard address.

Note that the IPv4 wildcard address does not conflict with
IPv6 non-wildcard addresses.

[0]: https://lore.kernel.org/netdev/e21bf153-80b0-9ec0-15ba-e04a4ad42c34@redhat.com/
[1]: https://lore.kernel.org/netdev/CAG_fn=Ud3zSW7AZWXc+asfMhZVL5ETnvuY44Pmyv4NPv-ijN-A@mail.gmail.com/

Fixes: 5456262d2baa ("net: Fix incorrect address comparison when searching for a bind2 bucket")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reported-by: Paul Holzinger <pholzing@redhat.com>
Link: https://lore.kernel.org/netdev/CAG_fn=Ud3zSW7AZWXc+asfMhZVL5ETnvuY44Pmyv4NPv-ijN-A@mail.gmail.com/
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Paul Holzinger <pholzing@redhat.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: smsc: bail out in lan87xx_read_status if genphy_read_status fails

If genphy_read_status fails then further access to the PHY may result
in unpredictable behavior. To prevent this bail out immediately if
genphy_read_status fails.

Fixes: 4223dbffed9f ("net: phy: smsc: Re-enable EDPD mode for LAN87xx")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/026aa4f2-36f5-1c10-ab9f-cdb17dda6ac4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: tunnels: annotate lockless accesses to dev->needed_headroom

IP tunnels can apparently update dev->needed_headroom
in their xmit path.

This patch takes care of three tunnels xmit, and also the
core LL_RESERVED_SPACE() and LL_RESERVED_SPACE_EXTRA()
helpers.

More changes might be needed for completeness.

BUG: KCSAN: data-race in ip_tunnel_xmit / ip_tunnel_xmit

read to 0xffff88815b9da0ec of 2 bytes by task 888 on cpu 1:
ip_tunnel_xmit+0x1270/0x1730 net/ipv4/ip_tunnel.c:803
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246

write to 0xffff88815b9da0ec of 2 bytes by task 2379 on cpu 0:
ip_tunnel_xmit+0x1294/0x1730 net/ipv4/ip_tunnel.c:804
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip6_finish_output2+0x9bc/0xc50 net/ipv6/ip6_output.c:134
__ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
ip6_finish_output+0x39a/0x4e0 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip6_output+0xeb/0x220 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:444 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
mld_sendpack+0x438/0x6a0 net/ipv6/mcast.c:1820
mld_send_cr net/ipv6/mcast.c:2121 [inline]
mld_ifc_work+0x519/0x7b0 net/ipv6/mcast.c:2653
process_one_work+0x3e6/0x750 kernel/workqueue.c:2390
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2537
kthread+0x1ac/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

value changed: 0x0dd4 -> 0x0e14

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 2379 Comm: kworker/0:0 Not tainted 6.3.0-rc1-syzkaller-00002-g8ca09d5fa354-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
Workqueue: mld mld_ifc_work

Fixes: 8eb30be0352d ("ipv6: Create ip6_tnl_xmit")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230310191109.2384387-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: avoid bonding causing auxiliary plug/unplug under RTNL lock

RDMA is not supported in ice on a PF that has been added to a bonded
interface. To enforce this, when an interface enters a bond, we unplug
the auxiliary device that supports RDMA functionality.  This unplug
currently happens in the context of handling the netdev bonding event.
This event is sent to the ice driver under RTNL context.  This is causing
a deadlock where the RDMA driver is waiting for the RTNL lock to complete
the removal.

Defer the unplugging/re-plugging of the auxiliary device to the service
task so that it is not performed under the RTNL lock context.

Cc: stable@vger.kernel.org # 6.1.x
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Link: https://lore.kernel.org/netdev/CAK8fFZ6A_Gphw_3-QMGKEFQk=sfCw1Qmq0TVZK3rtAi7vb621A@mail.gmail.com/
Fixes: 5cb1ebdbc434 ("ice: Fix race condition during interface enslave")
Fixes: 4eace75e0853 ("RDMA/irdma: Report the correct link speed")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230310194833.3074601-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

kbuild: deb-pkg: use dh_listpackages to know enabled packages

Use dh_listpackages to get a list of all binary packages.

With this, debian/control lists which binary packages will be produced.
Previously, ARCH=um listed linux-libc-dev in debian/control, but it
was not generated because each of mkdebian and builddeb independently
maintained the if-conditionals.

Another motivation is to allow scripts/package/builddeb to get the
package name (linux-image-*, etc.) dynamically from debian/control.

This will also allow the BuildProfile to control the generation of
the binary packages.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

kbuild: deb-pkg: split image and debug objects staging out into functions

Prepare for the refactoring in the next commit.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

kbuild: deb-pkg: set CROSS_COMPILE only when undefined

Commit 3ab18a625ce4 ("kbuild: deb-pkg: improve the usability of source
package") set needless CROSS_COMPILE.

For example, 'make allnoconfig bindeb-pkg' on a x86_64 system will set
CROSS_COMPILE=i686-linux-gnu-, where the biarch compiler 'gcc' should
work for building the i386 kernel.

  $ uname -m
  x86_64
  $ make allnoconfig bindeb-pkg >/dev/null
  dpkg-architecture: warning: specified GNU system type i686-linux-gnu does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable
   dpkg-source --before-build .
   debian/rules binary
  scripts/Kconfig.include:39: C compiler 'i686-linux-gnu-gcc' not found
  make[6]: *** [scripts/kconfig/Makefile:77: olddefconfig] Error 1
  make[5]: *** [Makefile:693: olddefconfig] Error 2
  make[4]: *** [Makefile:358: __build_one_by_one] Error 2
  make[3]: *** [debian/rules:7: build-arch] Error 2
  dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
  make[2]: *** [scripts/Makefile.package:127: bindeb-pkg] Error 2
  make[1]: *** [Makefile:1657: bindeb-pkg] Error 2
  make: *** [Makefile:358: __build_one_by_one] Error 2

Check whether CROSS_COMPILE is defined, instead of whether it is non-empty.

If you invoke debian/rules via Kbuild, CROSS_COMPILE is always defined
in the top Makefile.

Fixes: 3ab18a625ce4 ("kbuild: deb-pkg: improve the usability of source package")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

kbuild: deb-pkg: do not take KERNELRELEASE from the source version

KERNELRELEASE does not need to match the package version in changelog.
Rather, it conventially matches what is called 'ABINAME', which is a
part of the binary package names.

Both are the same by default, but the former might be overridden by
KDEB_PKGVERSION. In this case, the resulting package would not boot
because /lib/modules/$(uname -r) does not point the module directory.

Partially revert 3ab18a625ce4 ("kbuild: deb-pkg: improve the usability
of source package").

Reported-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Fixes: 3ab18a625ce4 ("kbuild: deb-pkg: improve the usability of source package")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>

kbuild: deb-pkg: make debian source package working again

Since commit c5bf2efb058d ("kbuild: deb-pkg: fix binary-arch and clean
in debian/rules"), the source package generated by 'make deb-pkg' fails
to build.

I terribly missed the fact that the intdeb-pkg target may regenerate
include/config/kernel.release due to the following in the top Makefile:

  %pkg: include/config/kernel.release FORCE

Restore KERNELRELEASE= option to avoid the kernel.release disagreement
between build-arch and binary-arch.

Fixes: c5bf2efb058d ("kbuild: deb-pkg: fix binary-arch and clean in debian/rules")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Makefile: Make kernelrelease target work with M=

That commit required the use of filechk_kernel.release for the
kernelrelease Makefile target. It is currently only being set when
KBUILD_EXTMOD is not set. Make sure it is set in that case as well.

Fixes: 1cb86b6c3136 ("kbuild: save overridden KERNELRELEASE in include/config/kernel.release")
Signed-off-by: Tzafrir Cohen <nvidia@cohens.org.il>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

cifs: use DFS root session instead of tcon ses

Use DFS root session whenever possible to get new DFS referrals
otherwise we might end up with an IPC tcon (tcon->ses->tcon_ipc) that
doesn't respond to them.  It should be safe accessing
@ses->dfs_root_ses directly in cifs_inval_name_dfs_link_error() as it
has same lifetime as of @tcon.

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: return DFS root session id in DebugData

Return the DFS root session id in /proc/fs/cifs/DebugData to make it
easier to track which IPC tcon was used to get new DFS referrals for a
specific connection, and aids in debugging.

A simple output of it would be

  Sessions:
  1) Address: 192.168.1.13 Uses: 1 Capability: 0x300067   Session Status: 1
  Security type: RawNTLMSSP  SessionId: 0xd80000000009
  User: 0 Cred User: 0
  DFS root session id: 0x128006c000035

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Steve French <stfrench@microsoft.com>