ocfs2: fix deadlock between setattr and dio_end_io_write

commit 90bd070aae6c4fb5d302f9c4b9c88be60c8197ec upstream.

The following deadlock is detected:

  truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write).

  PID: 14827  TASK: ffff881686a9af80  CPU: 20  COMMAND: "ora_p005_hrltd9"
   #0  __schedule at ffffffff818667cc
   #1  schedule at ffffffff81866de6
   #2  inode_dio_wait at ffffffff812a2d04
   #3  ocfs2_setattr at ffffffffc05f322e [ocfs2]
   #4  notify_change at ffffffff812a5a09
   #5  do_truncate at ffffffff812808f5
   #6  do_sys_ftruncate.constprop.18 at ffffffff81280cf2
   #7  sys_ftruncate at ffffffff81280d8e
   #8  do_syscall_64 at ffffffff81003949
   #9  entry_SYSCALL_64_after_hwframe at ffffffff81a001ad

dio completion path is going to complete one direct IO (decrement
inode->i_dio_count), but before that it hung at locking inode->i_rwsem:

   #0  __schedule+700 at ffffffff818667cc
   #1  schedule+54 at ffffffff81866de6
   #2  rwsem_down_write_failed+536 at ffffffff8186aa28
   #3  call_rwsem_down_write_failed+23 at ffffffff8185a1b7
   #4  down_write+45 at ffffffff81869c9d
   #5  ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2]
   #6  ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2]
   #7  dio_complete+140 at ffffffff812c873c
   #8  dio_aio_complete_work+25 at ffffffff812c89f9
   #9  process_one_work+361 at ffffffff810b1889
  #10  worker_thread+77 at ffffffff810b233d
  #11  kthread+261 at ffffffff810b7fd5
  #12  ret_from_fork+62 at ffffffff81a0035e

Thus above forms ABBA deadlock.  The same deadlock was mentioned in
upstream commit 28f5a8a7c033 ("ocfs2: should wait dio before inode lock
in ocfs2_setattr()").  It seems that that commit only removed the
cluster lock (the victim of above dead lock) from the ABBA deadlock
party.

End-user visible effects: Process hang in truncate -> ocfs2_setattr path
and other processes hang at ocfs2_dio_end_io_write path.

This is to fix the deadlock itself.  It removes inode_lock() call from
dio completion path to remove the deadlock and add ip_alloc_sem lock in
setattr path to synchronize the inode modifications.

[wen.gang.wang@oracle.com: remove the "had_alloc_lock" as suggested]
Link: https://lkml.kernel.org/r/20210402171344.1605-1-wen.gang.wang@oracle.com
Link: https://lkml.kernel.org/r/20210331203654.3911-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nds32: flush_dcache_page: use page_mapping_file to avoid races with swapoff

commit a3a8833dffb7e7329c2586b8bfc531adb503f123 upstream.

Commit cb9f753a3731 ("mm: fix races between swapoff and flush dcache")
updated flush_dcache_page implementations on several architectures to
use page_mapping_file() in order to avoid races between page_mapping()
and swapoff().

This update missed arch/nds32 and there is a possibility of a race
there.

Replace page_mapping() with page_mapping_file() in nds32 implementation
of flush_dcache_page().

Link: https://lkml.kernel.org/r/20210330175126.26500-1-rppt@kernel.org
Fixes: cb9f753a3731 ("mm: fix races between swapoff and flush dcache")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Greentime Hu <green.hu@gmail.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ia64: fix user_stack_pointer() for ptrace()

commit 7ad1e366167837daeb93d0bacb57dee820b0b898 upstream.

ia64 has two stacks:

 - memory stack (or stack), pointed at by by r12

 - register backing store (register stack), pointed at by
   ar.bsp/ar.bspstore with complications around dirty
   register frame on CPU.

In [1] Dmitry noticed that PTRACE_GET_SYSCALL_INFO returns the register
stack instead memory stack.

The bug comes from the fact that user_stack_pointer() and
current_user_stack_pointer() don't return the same register:

  ulong user_stack_pointer(struct pt_regs *regs) { return regs->ar_bspstore; }
  #define current_user_stack_pointer() (current_pt_regs()->r12)

The change gets both back in sync.

I think ptrace(PTRACE_GET_SYSCALL_INFO) is the only affected user by
this bug on ia64.

The change fixes 'rt_sigreturn.gen.test' strace test where it was
observed initially.

Link: https://bugs.gentoo.org/769614
Link: https://lkml.kernel.org/r/20210331084447.2561532-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Reported-by: Dmitry V. Levin <ldv@altlinux.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcov: re-fix clang-11+ support

commit 9562fd132985ea9185388a112e50f2a51557827d upstream.

LLVM changed the expected function signature for llvm_gcda_emit_function()
in the clang-11 release.  Users of clang-11 or newer may have noticed
their kernels producing invalid coverage information:

  $ llvm-cov gcov -a -c -u -f -b <input>.gcda -- gcno=<input>.gcno
  1 <func>: checksum mismatch, \
    (<lineno chksum A>, <cfg chksum B>) != (<lineno chksum A>, <cfg chksum C>)
  2 Invalid .gcda File!
  ...

Fix up the function signatures so calling this function interprets its
parameters correctly and computes the correct cfg checksum.  In
particular, in clang-11, the additional checksum is no longer optional.

Link: https://reviews.llvm.org/rG25544ce2df0daa4304c07e64b9c8b0f7df60c11d
Link: https://lkml.kernel.org/r/20210408184631.1156669-1-ndesaulniers@google.com
Reported-by: Prasad Sodagudi <psodagud@quicinc.com>
Tested-by: Prasad Sodagudi <psodagud@quicinc.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

LOOKUP_MOUNTPOINT: we are cleaning "jumped" flag too late

commit 4f0ed93fb92d3528c73c80317509df3f800a222b upstream.

That (and traversals in case of umount .) should be done before
complete_walk().  Either a braino or mismerge damage on queue
reorders - either way, I should've spotted that much earlier.

Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
X-Paperbag: Brown
Fixes: 161aff1d93ab "LOOKUP_MOUNTPOINT: fold path_mountpointat() into path_lookupat()"
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Fix probe time panic when AIP is enabled with a buggy BIOS

commit 5de61a47eb9064cbbc5f3360d639e8e34a690a54 upstream.

A panic can result when AIP is enabled:

  BUG: unable to handle kernel NULL pointer dereference at 000000000000000
  PGD 0 P4D 0
  Oops: 0000 1 SMP PTI
  CPU: 70 PID: 981 Comm: systemd-udevd Tainted: G OE --------- - - 4.18.0-240.el8.x86_64 #1
  Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.01.01.0005.101720141054 10/17/2014
  RIP: 0010:__bitmap_and+0x1b/0x70
  RSP: 0018:ffff99aa0845f9f0 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff8d5a6fc18000 RCX: 0000000000000048
  RDX: 0000000000000000 RSI: ffffffffc06336f0 RDI: ffff8d5a8fa67750
  RBP: 0000000000000079 R08: 0000000fffffffff R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000001 R12: ffffffffc06336f0
  R13: 00000000000000a0 R14: ffff8d5a6fc18000 R15: 0000000000000003
  FS: 00007fec137a5980(0000) GS:ffff8d5a9fa80000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 0000000a04b48002 CR4: 00000000001606e0
  Call Trace:
  hfi1_num_netdev_contexts+0x7c/0x110 [hfi1]
  hfi1_init_dd+0xd7f/0x1a90 [hfi1]
  ? pci_bus_read_config_dword+0x49/0x70
  ? pci_mmcfg_read+0x3e/0xe0
  do_init_one.isra.18+0x336/0x640 [hfi1]
  local_pci_probe+0x41/0x90
  pci_device_probe+0x105/0x1c0
  really_probe+0x212/0x440
  driver_probe_device+0x49/0xc0
  device_driver_attach+0x50/0x60
  __driver_attach+0x61/0x130
  ? device_driver_attach+0x60/0x60
  bus_for_each_dev+0x77/0xc0
  ? klist_add_tail+0x3b/0x70
  bus_add_driver+0x14d/0x1e0
  ? dev_init+0x10b/0x10b [hfi1]
  driver_register+0x6b/0xb0
  ? dev_init+0x10b/0x10b [hfi1]
  hfi1_mod_init+0x1e6/0x20a [hfi1]
  do_one_initcall+0x46/0x1c3
  ? free_unref_page_commit+0x91/0x100
  ? _cond_resched+0x15/0x30
  ? kmem_cache_alloc_trace+0x140/0x1c0
  do_init_module+0x5a/0x220
  load_module+0x14b4/0x17e0
  ? __do_sys_finit_module+0xa8/0x110
  __do_sys_finit_module+0xa8/0x110
  do_syscall_64+0x5b/0x1a0

The issue happens when pcibus_to_node() returns NO_NUMA_NODE.

Fix this issue by moving the initialization of dd->node to hfi1_devdata
allocation and remove the other pcibus_to_node() calls in the probe path
and use dd->node instead.

Affinity logic is adjusted to use a new field dd->affinity_entry as a
guard instead of dd->node.

Fixes: 4730f4a6c6b2 ("IB/hfi1: Activate the dummy netdev")
Link: https://lore.kernel.org/r/1617025700-31865-4-git-send-email-dennis.dalessandro@cornelisnetworks.com
Cc: stable@vger.kernel.org
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: processor: Fix build when CONFIG_ACPI_PROCESSOR=m

commit fa26d0c778b432d3d9814ea82552e813b33eeb5c upstream.

Commit 8cdddd182bd7 ("ACPI: processor: Fix CPU0 wakeup in
acpi_idle_play_dead()") tried to fix CPU0 hotplug breakage by copying
wakeup_cpu0() + start_cpu0() logic from hlt_play_dead()//mwait_play_dead()
into acpi_idle_play_dead(). The problem is that these functions are not
exported to modules so when CONFIG_ACPI_PROCESSOR=m build fails.

The issue could've been fixed by exporting both wakeup_cpu0()/start_cpu0()
(the later from assembly) but it seems putting the whole pattern into a
new function and exporting it instead is better.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 8cdddd182bd7 ("CPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()")
Cc: <stable@vger.kernel.org> # 5.10+
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix invalid access to ACPI _DSM objects

commit b6a37a93c9ac3900987c79b726d0bb3699d8db4e upstream.

intel_dsm_platform_mux_info() tries to parse the ACPI package data
from _DSM for the debug information, but it assumes the fixed format
without checking what values are stored in the elements actually.
When an unexpected value is returned from BIOS, it may lead to GPF or
NULL dereference, as reported recently.

Add the checks of the contents in the returned values and skip the
values for invalid cases.

v1->v2: Check the info contents before dereferencing, too

BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1184074
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210402082317.871-1-tiwai@suse.de
(cherry picked from commit 337d7a1621c7f02af867229990ac67c97da1b53a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits

commit 4b5923249b8fa427943b50b8f35265176472be38 upstream.

There are a few more bits in the GSWIP_MII_CFG register for which we
did rely on the boot-loader (or the hardware defaults) to set them up
properly.

For some external RMII PHYs we need to select the GSWIP_MII_CFG_RMII_CLK
bit and also we should un-set it for non-RMII PHYs. The
GSWIP_MII_CFG_RMII_CLK bit is ignored for other PHY connection modes.

The GSWIP IP also supports in-band auto-negotiation for RGMII PHYs when
the GSWIP_MII_CFG_RGMII_IBS bit is set. Clear this bit always as there's
no known hardware which uses this (so it is not tested yet).

Clear the xMII isolation bit when set at initialization time if it was
previously set by the bootloader. Not doing so could lead to no traffic
(neither RX nor TX) on a port with this bit set.

While here, also add the GSWIP_MII_CFG_RESET bit. We don't need to
manage it because this bit is self-clearning when set. We still add it
here to get a better overview of the GSWIP_MII_CFG register.

Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: stable@vger.kernel.org
Suggested-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: lantiq_gswip: Don't use PHY auto polling

commit 3e9005be87777afc902b9f5497495898202d335d upstream.

PHY auto polling on the GSWIP hardware can be used so link changes
(speed, link up/down, etc.) can be detected automatically. Internally
GSWIP reads the PHY's registers for this functionality. Based on this
automatic detection GSWIP can also automatically re-configure it's port
settings. Unfortunately this auto polling (and configuration) mechanism
seems to cause various issues observed by different people on different
devices:
- FritzBox 7360v2: the two Gbit/s ports (connected to the two internal
  PHY11G instances) are working fine but the two Fast Ethernet ports
  (using an AR8030 RMII PHY) are completely dead (neither RX nor TX are
  received). It turns out that the AR8030 PHY sets the BMSR_ESTATEN bit
  as well as the ESTATUS_1000_TFULL and ESTATUS_1000_XFULL bits. This
  makes the PHY auto polling state machine (rightfully?) think that the
  established link speed (when the other side is Gbit/s capable) is
  1Gbit/s.
- None of the Ethernet ports on the Zyxel P-2812HNU-F1 (two are
  connected to the internal PHY11G GPHYs while the other three are
  external RGMII PHYs) are working. Neither RX nor TX traffic was
  observed. It is not clear which part of the PHY auto polling state-
  machine caused this.
- FritzBox 7412 (only one LAN port which is connected to one of the
  internal GPHYs running in PHY22F / Fast Ethernet mode) was seeing
  random disconnects (link down events could be seen). Sometimes all
  traffic would stop after such disconnect. It is not clear which part
  of the PHY auto polling state-machine cauased this.
- TP-Link TD-W9980 (two ports are connected to the internal GPHYs
  running in PHY11G / Gbit/s mode, the other two are external RGMII
  PHYs) was affected by similar issues as the FritzBox 7412 just without
  the "link down" events

Switch to software based configuration instead of PHY auto polling (and
letting the GSWIP hardware configure the ports automatically) for the
following link parameters:
- link up/down
- link speed
- full/half duplex
- flow control (RX / TX pause)

After a big round of manual testing by various people (who helped test
this on OpenWrt) it turns out that this fixes all reported issues.

Additionally it can be considered more future proof because any
"quirk" which is implemented for a PHY on the driver side can now be
used with the GSWIP hardware as well because Linux is in control of the
link parameters.

As a nice side-effect this also solves a problem where fixed-links were
not supported previously because we were relying on the PHY auto polling
mechanism, which cannot work for fixed-links as there's no PHY from
where it can read the registers. Configuring the link settings on the
GSWIP ports means that we now use the settings from device-tree also for
ports with fixed-links.

Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Fixes: 3e6fdeb28f4c33 ("net: dsa: lantiq_gswip: Let GSWIP automatically set the xMII clock")
Cc: stable@vger.kernel.org
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: lantiq_gswip: Let GSWIP automatically set the xMII clock

commit 3e6fdeb28f4c331acbd27bdb0effc4befd4ef8e8 upstream.

The xMII interface clock depends on the PHY interface (MII, RMII, RGMII)
as well as the current link speed. Explicitly configure the GSWIP to
automatically select the appropriate xMII interface clock.

This fixes an issue seen by some users where ports using an external
RMII or RGMII PHY were deaf (no RX or TX traffic could be seen). Most
likely this is due to an "invalid" xMII clock being selected either by
the bootloader or hardware-defaults.

Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh

commit 864db232dc7036aa2de19749c3d5be0143b24f8f upstream.

nlh is being checked for validtity two times when it is dereferenced in
this function. Check for validity again when updating the flags through
nlh pointer to make the dereferencing safe.

CC: <stable@vger.kernel.org>
Addresses-Coverity: ("NULL pointer dereference")
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/evtchn: Change irq_info lock to raw_spinlock_t

commit d120198bd5ff1d41808b6914e1eb89aff937415c upstream.

Unmask operation must be called with interrupt disabled,
on preempt_rt spin_lock_irqsave/spin_unlock_irqrestore
don't disable/enable interrupts, so use raw_* implementation
and change lock variable in struct irq_info from spinlock_t
to raw_spinlock_t

Cc: stable@vger.kernel.org
Fixes: 25da4618af24 ("xen/events: don't unmask an event channel when an eoi is pending")
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20210406105105.10141-1-luca.fancellu@arm.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: fix race between old and new sidtab

commit 9ad6e9cb39c66366bf7b9aece114aca277981a1f upstream.

Since commit 1b8b31a2e612 ("selinux: convert policy read-write lock to
RCU"), there is a small window during policy load where the new policy
pointer has already been installed, but some threads may still be
holding the old policy pointer in their read-side RCU critical sections.
This means that there may be conflicting attempts to add a new SID entry
to both tables via sidtab_context_to_sid().

See also (and the rest of the thread):
https://lore.kernel.org/selinux/CAFqZXNvfux46_f8gnvVvRYMKoes24nwm2n3sPbMjrB8vKTW00g@mail.gmail.com/

Fix this by installing the new policy pointer under the old sidtab's
spinlock along with marking the old sidtab as "frozen". Then, if an
attempt to add new entry to a "frozen" sidtab is detected, make
sidtab_context_to_sid() return -ESTALE to indicate that a new policy
has been installed and that the caller will have to abort the policy
transaction and try again after re-taking the policy pointer (which is
guaranteed to be a newer policy). This requires adding a retry-on-ESTALE
logic to all callers of sidtab_context_to_sid(), but fortunately these
are easy to determine and aren't that many.

This seems to be the simplest solution for this problem, even if it
looks somewhat ugly. Note that other places in the kernel (e.g.
do_mknodat() in fs/namei.c) use similar stale-retry patterns, so I think
it's reasonable.

Cc: stable@vger.kernel.org
Fixes: 1b8b31a2e612 ("selinux: convert policy read-write lock to RCU")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: fix cond_list corruption when changing booleans

commit d8f5f0ea5b86300390b026b6c6e7836b7150814a upstream.

Currently, duplicate_policydb_cond_list() first copies the whole
conditional avtab and then tries to link to the correct entries in
cond_dup_av_list() using avtab_search(). However, since the conditional
avtab may contain multiple entries with the same key, this approach
often fails to find the right entry, potentially leading to wrong rules
being activated/deactivated when booleans are changed.

To fix this, instead start with an empty conditional avtab and add the
individual entries one-by-one while building the new av_lists. This
approach leads to the correct result, since each entry is present in the
av_lists exactly once.

The issue can be reproduced with Fedora policy as follows:

    # sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A
    allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
    allow ftpd_t public_content_rw_t:dir { add_name create link remove_name rename reparent rmdir setattr unlink watch watch_reads write }; [ ftpd_anon_write ]:True
    # setsebool ftpd_anon_write=off ftpd_connect_all_unreserved=off ftpd_connect_db=off ftpd_full_access=off

On fixed kernels, the sesearch output is the same after the setsebool
command:

    # sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A
    allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
    allow ftpd_t public_content_rw_t:dir { add_name create link remove_name rename reparent rmdir setattr unlink watch watch_reads write }; [ ftpd_anon_write ]:True

While on the broken kernels, it will be different:

    # sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A
    allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
    allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
    allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True

While there, also simplify the computation of nslots. This changes the
nslots values for nrules 2 or 3 to just two slots instead of 4, which
makes the sequence more consistent.

Cc: stable@vger.kernel.org
Fixes: c7c556f1e81b ("selinux: refactor changing booleans")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: make nslot handling in avtab more robust

commit 442dc00f82a9727dc0c48c44f792c168f593c6df upstream.

1. Make sure all fileds are initialized in avtab_init().
2. Slightly refactor avtab_alloc() to use the above fact.
3. Use h->nslot == 0 as a sentinel in the access functions to prevent
   dereferencing h->htable when it's not allocated.

Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: Avoid endless loops caused by repeated llcp_sock_connect()

commit 4b5db93e7f2afbdfe3b78e37879a85290187e6f1 upstream.

When sock_wait_state() returns -EINPROGRESS, "sk->sk_state" is
 LLCP_CONNECTING. In this case, llcp_sock_connect() is repeatedly invoked,
 nfc_llcp_sock_link() will add sk to local->connecting_sockets twice.
 sk->sk_node->next will point to itself, that will make an endless loop
 and hang-up the system.
To fix it, check whether sk->sk_state is LLCP_CONNECTING in
 llcp_sock_connect() to avoid repeated invoking.

Fixes: b4011239a08e ("NFC: llcp: Fix non blocking sockets connections")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Link: https://www.openwall.com/lists/oss-security/2020/11/01/1
Cc: <stable@vger.kernel.org> #v3.11
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: fix memory leak in llcp_sock_connect()

commit 7574fcdbdcb335763b6b322f6928dc0fd5730451 upstream.

In llcp_sock_connect(), use kmemdup to allocate memory for
 "llcp_sock->service_name". The memory is not released in the sock_unlink
label of the subsequent failure branch.
As a result, memory leakage occurs.

fix CVE-2020-25672

Fixes: d646960f7986 ("NFC: Initial LLCP support")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Link: https://www.openwall.com/lists/oss-security/2020/11/01/1
Cc: <stable@vger.kernel.org> #v3.3
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: fix refcount leak in llcp_sock_connect()

commit 8a4cd82d62b5ec7e5482333a72b58a4eea4979f0 upstream.

nfc_llcp_local_get() is invoked in llcp_sock_connect(),
but nfc_llcp_local_put() is not invoked in subsequent failure branches.
As a result, refcount leakage occurs.
To fix it, add calling nfc_llcp_local_put().

fix CVE-2020-25671
Fixes: c7aa12252f51 ("NFC: Take a reference on the LLCP local pointer when creating a socket")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Link: https://www.openwall.com/lists/oss-security/2020/11/01/1
Cc: <stable@vger.kernel.org> #v3.6
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: fix refcount leak in llcp_sock_bind()

commit c33b1cc62ac05c1dbb1cdafe2eb66da01c76ca8d upstream.

nfc_llcp_local_get() is invoked in llcp_sock_bind(),
but nfc_llcp_local_put() is not invoked in subsequent failure branches.
As a result, refcount leakage occurs.
To fix it, add calling nfc_llcp_local_put().

fix CVE-2020-25670
Fixes: c7aa12252f51 ("NFC: Take a reference on the LLCP local pointer when creating a socket")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Link: https://www.openwall.com/lists/oss-security/2020/11/01/1
Cc: <stable@vger.kernel.org> #v3.6
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: intel: atom: Stop advertising non working S24LE support

commit aa65bacdb70e549a81de03ec72338e1047842883 upstream.

The SST firmware's media and deep-buffer inputs are hardcoded to
S16LE, the corresponding DAIs don't have a hw_params callback and
their prepare callback also does not take the format into account.

So far the advertising of non working S24LE support has not caused
issues because pulseaudio defaults to S16LE, but changing pulse-audio's
config to use S24LE will result in broken sound.

Pipewire is replacing pulse now and pipewire prefers S24LE over S16LE
when available, causing the problem of the broken S24LE support to
come to the surface now.

Cc: stable@vger.kernel.org
BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/866
Fixes: 098c2cd281409 ("ASoC: Intel: Atom: add 24-bit support for media playback and capture")
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210324132711.216152-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/conexant: Apply quirk for another HP ZBook G5 model

commit c6423ed2da6214a68527446b5f8e09cf7162b2ce upstream.

There is another HP ZBook G5 model with the PCI SSID 103c:844f that
requires the same quirk for controlling the mute LED.  Add the
corresponding entry to the quirk table.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212407
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210401171314.667-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix speaker amp setup on Acer Aspire E1

commit c8426b2700b57d2760ff335840a02f66a64b6044 upstream.

We've got a report about Acer Aspire E1 (PCI SSID 1025:0840) that
loses the speaker output after resume.  With the comparison of COEF
dumps, it was identified that the COEF 0x0d bits 0x6000 corresponds to
the speaker amp.

This patch adds the specific quirk for the device to restore the COEF
bits at the codec (re-)initialization.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1183869
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210407095730.12560-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: aloop: Fix initialization of controls

commit 168632a495f49f33a18c2d502fc249d7610375e9 upstream.

Add a control to the card before copying the id so that the numid field
is initialized in the copy. Otherwise the numid field of active_id,
format_id, rate_id and channels_id will be the same (0) and
snd_ctl_notify() will not queue the events properly.

Signed-off-by: Jonas Holmberg <jonashg@axis.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210407075428.2666787-1-jonashg@axis.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm/compat: Cleanup WARN()s that can be user-triggered

commit ef19e111337f6c3dca7019a8bad5fbc6fb18d635 upstream.

Replace WARN_ONCE() that can be triggered from userspace with
pr_warn_once(). Those still give user a hint what's the issue.

I've left WARN()s that are not possible to trigger with current
code-base and that would mean that the code has issues:
- relying on current compat_msg_min[type] <= xfrm_msg_min[type]
- expected 4-byte padding size difference between
  compat_msg_min[type] and xfrm_msg_min[type]
- compat_policy[type].len <= xfrma_policy[type].len
(for every type)

Reported-by: syzbot+834ffd1afc7212eb8147@syzkaller.appspotmail.com
Fixes: 5f3eea6b7e8f ("xfrm/compat: Attach xfrm dumps to 64=>32 bit translator")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.29

Tested-by: A. Rabusov <a.rabusov@tum.de>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20210409095304.818847860@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

init/Kconfig: make COMPILE_TEST depend on HAS_IOMEM

commit ea29b20a828511de3348334e529a3d046a180416 upstream.

I read the commit log of the following two:

- bc083a64b6c0 ("init/Kconfig: make COMPILE_TEST depend on !UML")
- 334ef6ed06fa ("init/Kconfig: make COMPILE_TEST depend on !S390")

Both are talking about HAS_IOMEM dependency missing in many drivers.

So, 'depends on HAS_IOMEM' seems the direct, sensible solution to me.

This does not change the behavior of UML. UML still cannot enable
COMPILE_TEST because it does not provide HAS_IOMEM.

The current dependency for S390 is too strong. Under the condition of
CONFIG_PCI=y, S390 provides HAS_IOMEM, hence can enable COMPILE_TEST.

I also removed the meaningless 'default n'.

Link: https://lkml.kernel.org/r/20210224140809.1067582-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KP Singh <kpsingh@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Quentin Perret <qperret@google.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: "Enrico Weigelt, metux IT consult" <lkml@metux.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

init/Kconfig: make COMPILE_TEST depend on !S390

commit 334ef6ed06fa1a54e35296b77b693bcf6d63ee9e upstream.

While allmodconfig and allyesconfig build for s390 there are also
various bots running compile tests with randconfig, where PCI is
disabled. This reveals that a lot of drivers should actually depend on
HAS_IOMEM.
Adding this to each device driver would be a never ending story,
therefore just disable COMPILE_TEST for s390.

The reasoning is more or less the same as described in
commit bc083a64b6c0 ("init/Kconfig: make COMPILE_TEST depend on !UML").

Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, x86: Validate computation of branch displacements for x86-32

commit 26f55a59dc65ff77cd1c4b37991e26497fc68049 upstream.

The branch displacement logic in the BPF JIT compilers for x86 assumes
that, for any generated branch instruction, the distance cannot
increase between optimization passes.

But this assumption can be violated due to how the distances are
computed. Specifically, whenever a backward branch is processed in
do_jit(), the distance is computed by subtracting the positions in the
machine code from different optimization passes. This is because part
of addrs[] is already updated for the current optimization pass, before
the branch instruction is visited.

And so the optimizer can expand blocks of machine code in some cases.

This can confuse the optimizer logic, where it assumes that a fixed
point has been reached for all machine code blocks once the total
program size stops changing. And then the JIT compiler can output
abnormal machine code containing incorrect branch displacements.

To mitigate this issue, we assert that a fixed point is reached while
populating the output image. This rejects any problematic programs.
The issue affects both x86-32 and x86-64. We mitigate separately to
ease backporting.

Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, x86: Validate computation of branch displacements for x86-64

commit e4d4d456436bfb2fe412ee2cd489f7658449b098 upstream.

The branch displacement logic in the BPF JIT compilers for x86 assumes
that, for any generated branch instruction, the distance cannot
increase between optimization passes.

But this assumption can be violated due to how the distances are
computed. Specifically, whenever a backward branch is processed in
do_jit(), the distance is computed by subtracting the positions in the
machine code from different optimization passes. This is because part
of addrs[] is already updated for the current optimization pass, before
the branch instruction is visited.

And so the optimizer can expand blocks of machine code in some cases.

This can confuse the optimizer logic, where it assumes that a fixed
point has been reached for all machine code blocks once the total
program size stops changing. And then the JIT compiler can output
abnormal machine code containing incorrect branch displacements.

To mitigate this issue, we assert that a fixed point is reached while
populating the output image. This rejects any problematic programs.
The issue affects both x86-32 and x86-64. We mitigate separately to
ease backporting.

Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/resolve_btfids: Add /libbpf to .gitignore

[ Upstream commit 90a82b1fa40d0cee33d1c9306dc54412442d1e57 ]

This is what I see after compiling the kernel:

 # bpf-next...bpf-next/master
 ?? tools/bpf/resolve_btfids/libbpf/

Fixes: fc6b48f692f8 ("tools/resolve_btfids: Build libbpf and libsubcmd in separate directories")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210212010053.668700-1-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: Do not clean resolve_btfids if the output does not exist

[ Upstream commit 0e1aa629f1ce9e8cb89e0cefb9e3bfb3dfa94821 ]

Nathan reported issue with cleaning empty build directory:

  $ make -s O=build distclean
  ../../scripts/Makefile.include:4: *** \
  O=/ho...build/tools/bpf/resolve_btfids does not exist.  Stop.

The problem that tools scripts require existing output
directory, otherwise it fails.

Adding check around the resolve_btfids clean target to
ensure the output directory is in place.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/bpf/20210211124004.1144344-1-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: Add resolve_btfids clean to root clean target

[ Upstream commit 50d3a3f81689586697a38cd60070181ebe626ad9 ]

The resolve_btfids tool is used during the kernel build,
so we should clean it on kernel's make clean.

Invoking the the resolve_btfids clean as part of root
'make clean'.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210205124020.683286-5-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/resolve_btfids: Set srctree variable unconditionally

[ Upstream commit 7962cb9b640af98ccb577f46c8b894319e6c5c20 ]

We want this clean to be called from tree's root Makefile,
which defines same srctree variable and that will screw
the make setup.

We actually do not use srctree being passed from outside,
so we can solve this by setting current srctree value
directly.

Also changing the way how srctree is initialized as suggested
by Andrri.

Also root Makefile does not define the implicit RM variable,
so adding RM initialization.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210205124020.683286-4-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/resolve_btfids: Check objects before removing

[ Upstream commit f23130979c2f15ea29a431cd9e1ea7916337bbd4 ]

We want this clean to be called from tree's root clean
and that one is silent if there's nothing to clean.

Adding check for all object to clean and display CLEAN
messages only if there are objects to remove.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210205124020.683286-3-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/resolve_btfids: Build libbpf and libsubcmd in separate directories

[ Upstream commit fc6b48f692f89cc48bfb7fd1aa65454dfe9b2d77 ]

Setting up separate build directories for libbpf and libpsubcmd,
so it's separated from other objects and we don't get them mixed
in the future.

It also simplifies cleaning, which is now simple rm -rf.

Also there's no need for FEATURE-DUMP.libbpf and bpf_helper_defs.h
files in .gitignore anymore.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210205124020.683286-2-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

math: Export mul_u64_u64_div_u64

[ Upstream commit bf45947864764548697e7515fe693e10f173f312 ]

Fixes: f51d7bf1dbe5 ("ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: fix timeout cancel return code

[ Upstream commit 1ee4160c73b2102a52bc97a4128a89c34821414f ]

When we cancel a timeout we should emit a sensible return code, like
-ECANCELED but not 0, otherwise it may trick users.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7b0ad1065e3bd1994722702bd0ba9e7bc9b0683b.1616696997.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Silently ignore unknown oplock break handle

[ Upstream commit 219481a8f90ec3a5eed9638fb35609e4b1aeece7 ]

Make SMB2 not print out an error when an oplock break is received for an
unknown handle, similar to SMB1.  The debug message which is printed for
these unknown handles may also be misleading, so fix that too.

The SMB2 lease break path is not affected by this patch.

Without this, a program which writes to a file from one thread, and
opens, reads, and writes the same file from another thread triggers the
below errors several times a minute when run against a Samba server
configured with "smb2 leases = no".

 CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2
 00000000: 424d53fe 00000040 00000000 00000012  .SMB@...........
 00000010: 00000001 00000000 ffffffff ffffffff  ................
 00000020: 00000000 00000000 00000000 00000000  ................
 00000030: 00000000 00000000 00000000 00000000  ................

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: revalidate mapping when we open files for SMB1 POSIX

[ Upstream commit cee8f4f6fcabfdf229542926128e9874d19016d5 ]

RHBZ: 1933527

Under SMB1 + POSIX, if an inode is reused on a server after we have read and
cached a part of a file, when we then open the new file with the
re-cycled inode there is a chance that we may serve the old data out of cache
to the application.
This only happens for SMB1 (deprecated) and when posix are used.
The simplest solution to avoid this race is to force a revalidate
on smb1-posix open.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ia64: fix format strings for err_inject

[ Upstream commit 95d44a470a6814207d52dd6312203b0f4ef12710 ]

Fix warning with %lx / u64 mismatch:

  arch/ia64/kernel/err_inject.c: In function 'show_resources':
  arch/ia64/kernel/err_inject.c:62:22: warning:
    format '%lx' expects argument of type 'long unsigned int',
    but argument 3 has type 'u64' {aka 'long long unsigned int'}
     62 |  return sprintf(buf, "%lx", name[cpu]);   \
        |                      ^~~~~~~

Link: https://lkml.kernel.org/r/20210313104312.1548232-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ia64: mca: allocate early mca with GFP_ATOMIC

[ Upstream commit f2a419cf495f95cac49ea289318b833477e1a0e2 ]

The sleep warning happens at early boot right at secondary CPU
activation bootup:

    smp: Bringing up secondary CPUs ...
    BUG: sleeping function called from invalid context at mm/page_alloc.c:4942
    in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
    CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.12.0-rc2-00007-g79e228d0b611-dirty #99
    ..
    Call Trace:
      show_stack+0x90/0xc0
      dump_stack+0x150/0x1c0
      ___might_sleep+0x1c0/0x2a0
      __might_sleep+0xa0/0x160
      __alloc_pages_nodemask+0x1a0/0x600
      alloc_page_interleave+0x30/0x1c0
      alloc_pages_current+0x2c0/0x340
      __get_free_pages+0x30/0xa0
      ia64_mca_cpu_init+0x2d0/0x3a0
      cpu_init+0x8b0/0x1440
      start_secondary+0x60/0x700
      start_ap+0x750/0x780
    Fixed BSP b0 value from CPU 1

As I understand interrupts are not enabled yet and system has a lot of
memory.  There is little chance to sleep and switch to GFP_ATOMIC should
be a no-op.

Link: https://lkml.kernel.org/r/20210315085045.204414-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/vm: fix out-of-tree build

[ Upstream commit 19ec368cbc7ee1915e78c120b7a49c7f14734192 ]

When building out-of-tree, attempting to make target from $(OUTPUT) directory:

  make[1]: *** No rule to make target '$(OUTPUT)/protection_keys.c', needed by '$(OUTPUT)/protection_keys_32'.

Link: https://lkml.kernel.org/r/20210315094700.522753-1-rong.a.chen@intel.com
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: pscsi: Clean up after failure in pscsi_map_sg()

[ Upstream commit 36fa766faa0c822c860e636fe82b1affcd022974 ]

If pscsi_map_sg() fails, make sure to drop references to already allocated
bios.

Link: https://lore.kernel.org/r/20210323212431.15306-2-mwilck@suse.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation

[ Upstream commit f51d7bf1dbe5522c51c93fe8faa5f4abbdf339cd ]

Current calculation for diff of TMR_ADD register value may have
64-bit overflow in this code line, when long type scaled_ppm is
large.

adj *= scaled_ppm;

This patch is to resolve it by using mul_u64_u64_div_u64().

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: intel_pmc_core: Ignore GBE LTR on Tiger Lake platforms

[ Upstream commit d1635448f1105e549b4041aab930dbc6945fc635 ]

Due to a HW limitation, the Latency Tolerance Reporting (LTR) value
programmed in the Tiger Lake GBE controller is not large enough to allow
the platform to enter Package C10, which in turn prevents the platform from
achieving its low power target during suspend-to-idle.  Ignore the GBE LTR
value on Tiger Lake. LTR ignore functionality is currently performed solely
by a debugfs write call. Split out the LTR code into its own function that
can be called by both the debugfs writer and by this work around.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Sasha Neftin <sasha.neftin@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: clear GD_NEED_PART_SCAN later in bdev_disk_changed

[ Upstream commit 5116784039f0421e9a619023cfba3e302c3d9adc ]

The GD_NEED_PART_SCAN is set by bdev_check_media_change to initiate
a partition scan while removing a block device. It should be cleared
after blk_drop_paritions because blk_drop_paritions could return
-EBUSY and then the consequence __blkdev_get has no chance to do
delete_partition if GD_NEED_PART_SCAN already cleared.

It causes some problems on some card readers. Ex. Realtek card
reader 0bda:0328 and 0bda:0158. The device node of the partition
will not disappear after the memory card removed. Thus the user
applications can not update the device mapping correctly.

BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1920874
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210323085219.24428-1-chris.chiu@canonical.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/build: Turn off -fcf-protection for realmode targets

[ Upstream commit 9fcb51c14da2953de585c5c6e50697b8a6e91a7b ]

The new Ubuntu GCC packages turn on -fcf-protection globally,
which causes a build failure in the x86 realmode code:

  cc1: error: ‘-fcf-protection’ is not compatible with this target

Turn it off explicitly on compilers that understand this option.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210323124846.1584944-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume

[ Upstream commit 627dc55c273dab308303a5217bd3e767d7083ddb ]

DPU runtime resume will request for a min vote on the AXI bus as
it is a necessary step before turning ON the AXI clock.

The change does below
1) Move the icc path set before requesting runtime get_sync.
2) remove the dependency of hw catalog for min ib vote
as it is initialized at a later point.

Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftest/arm64: sve: Do not use non-canonical FFR register value

[ Upstream commit 7011d72588d16a9e5f5d85acbc8b10019809599c ]

The "First Fault Register" (FFR) is an SVE register that mimics a
predicate register, but clears bits when a load or store fails to handle
an element of a vector. The supposed usage scenario is to initialise
this register (using SETFFR), then *read* it later on to learn about
elements that failed to load or store. Explicit writes to this register
using the WRFFR instruction are only supposed to *restore* values
previously read from the register (for context-switching only).
As the manual describes, this register holds only certain values, it:
"... contains a monotonic predicate value, in which starting from bit 0
there are zero or more 1 bits, followed only by 0 bits in any remaining
bit positions."
Any other value is UNPREDICTABLE and is not supposed to be "restored"
into the register.

The SVE test currently tries to write a signature pattern into the
register, which is *not* a canonical FFR value. Apparently the existing
setups treat UNPREDICTABLE as "read-as-written", but a new
implementation actually only stores canonical values. As a consequence,
the sve-test fails immediately when comparing the FFR value:
-----------
 # ./sve-test
Vector length:  128 bits
PID:    207
Mismatch: PID=207, iteration=0, reg=48
        Expected [cf00]
        Got      [0f00]
Aborted
-----------

Fix this by only populating the FFR with proper canonical values.
Effectively the requirement described above limits us to 17 unique
values over 16 bits worth of FFR, so we condense our signature down to 4
bits (2 bits from the PID, 2 bits from the generation) and generate the
canonical pattern from it. Any bits describing elements above the
minimum 128 bit are set to 0.

This aligns the FFR usage to the architecture and fixes the test on
microarchitectures implementing FFR in a more restricted way.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviwed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210319120128.29452-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: thinkpad_acpi: Allow the FnLock LED to change state

[ Upstream commit 3d677f12ea3a2097a16ded570623567403dea959 ]

On many recent ThinkPad laptops, there's a new LED next to the ESC key,
that indicates the FnLock status.
When the Fn+ESC combo is pressed, FnLock is toggled, which causes the
Media Key functionality to change, making it so that the media keys
either perform their media key function, or function as an F-key by
default. The Fn key can be used the access the alternate function at any
time.

With the current linux kernel, the LED doens't change state if you press
the Fn+ESC key combo. However, the media key functionality *does*
change. This is annoying, since the LED will stay on if it was on during
bootup, and it makes it hard to keep track what the current state of the
FnLock is.

This patch calls an ACPI function, that gets the current media key
state, when the Fn+ESC key combo is pressed. Through testing it was
discovered that this function causes the LED to update correctly to
reflect the current state when this function is called.

The relevant ACPI calls are the following:
\_SB_.PCI0.LPC0.EC0_.HKEY.GMKS: Get media key state, returns 0x603 if the FnLock mode is enabled, and 0x602 if it's disabled.
\_SB_.PCI0.LPC0.EC0_.HKEY.SMKS: Set media key state, sending a 1 will enable FnLock mode, and a 0 will disable it.

Relevant discussion:
https://bugzilla.kernel.org/show_bug.cgi?id=207841
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1881015

Signed-off-by: Esteve Varela Colominas <esteve.varela@gmail.com>
Link: https://lore.kernel.org/r/20210315195823.23212-1-esteve.varela@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipa: fix init header command validation

[ Upstream commit b4afd4b90a7cfe54c7cd9db49e3c36d552325eac ]

We use ipa_cmd_header_valid() to ensure certain values we will
program into hardware are within range, well in advance of when we
actually program them.  This way we avoid having to check for errors
when we actually program the hardware.

Unfortunately the dev_err() call for a bad offset value does not
supply the arguments to match the format specifiers properly.
Fix this.

There was also supposed to be a check to ensure the size to be
programmed fits in the field that holds it.  Add this missing check.

Rearrange the way we ensure the header table fits in overall IPA
memory range.

Finally, update ipa_cmd_table_valid() so the format of messages
printed for errors matches what's done in ipa_cmd_header_valid().

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nftables: skip hook overlap logic if flowtable is stale

[ Upstream commit 86fe2c19eec4728fd9a42ba18f3b47f0d5f9fd7c ]

If the flowtable has been previously removed in this batch, skip the
hook overlap checks. This fixes spurious EEXIST errors when removing and
adding the flowtable in the same batch.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: Fix gre tunneling over ipv6

[ Upstream commit 8b2030b4305951f44afef80225f1475618e25a73 ]

This fix permits gre connections to be tracked within ip6tables rules

Signed-off-by: Ludovic Senecaux <linuxludo@free.fr>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Ratelimit invalid-fence message

[ Upstream commit 7ad48d27a2846bfda29214fb454d001c3e02b9e7 ]

We have seen a couple cases where low memory situations cause something
bad to happen, followed by a flood of these messages obscuring the root
cause.  Lets ratelimit the dmesg spam so that next time it happens we
don't lose the kernel traces leading up to this.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/adreno: a5xx_power: Don't apply A540 lm_setup to other GPUs

[ Upstream commit 4a9d36b0610aa7034340e976652e5b43320dd7c5 ]

While passing the A530-specific lm_setup func to A530 and A540
to !A530 was fine back when only these two were supported, it
certainly is not a good idea to send A540 specifics to smaller
GPUs like A508 and friends.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi_pll_7nm: Fix variable usage for pll_lockdet_rate

[ Upstream commit 9daaf31307856defb1070685418ce5a484ecda3a ]

The PLL_LOCKDET_RATE_1 was being programmed with a hardcoded value
directly, but the same value was also being specified in the
dsi_pll_regs struct pll_lockdet_rate variable: let's use it!

Based on 362cadf34b9f ("drm/msm/dsi_pll_10nm: Fix variable usage for
pll_lockdet_rate")

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: choose first enabled channel for monitor

[ Upstream commit 041c881a0ba8a75f71118bd9766b78f04beed469 ]

Even if the first channel from sband channel list is invalid
or disabled mac80211 ends up choosing it as the default channel
for monitor interfaces, making them not usable.

Fix this by assigning the first available valid or enabled
channel instead.

Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org>
Link: https://lore.kernel.org/r/1615440547-7661-1-git-send-email-kathirve@codeaurora.org
[reword commit message, comment, code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: Check crypto_aead_encrypt for errors

[ Upstream commit 58d25626f6f0ea5bcec3c13387b9f835d188723d ]

crypto_aead_encrypt returns <0 on error, so if these calls are not checked,
execution may continue with failed encrypts.  It also seems that these two
crypto_aead_encrypt calls are the only instances in the codebase that are
not checked for errors.

Signed-off-by: Daniel Phan <daniel.phan36@gmail.com>
Link: https://lore.kernel.org/r/20210309204137.823268-1-daniel.phan36@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mISDN: fix crash in fritzpci

[ Upstream commit a9f81244d2e33e6dfcef120fefd30c96b3f7cdb0 ]

setup_fritz() in avmfritz.c might fail with -EIO and in this case the
isac.type and isac.write_reg is not initialized and remains 0(NULL).
A subsequent call to isac_release() will dereference isac->write_reg and
crash.

[    1.737444] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    1.737809] #PF: supervisor instruction fetch in kernel mode
[    1.738106] #PF: error_code(0x0010) - not-present page
[    1.738378] PGD 0 P4D 0
[    1.738515] Oops: 0010 [#1] SMP NOPTI
[    1.738711] CPU: 0 PID: 180 Comm: systemd-udevd Not tainted 5.12.0-rc2+ #78
[    1.739077] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-p
rebuilt.qemu.org 04/01/2014
[    1.739664] RIP: 0010:0x0
[    1.739807] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[    1.740200] RSP: 0018:ffffc9000027ba10 EFLAGS: 00010202
[    1.740478] RAX: 0000000000000000 RBX: ffff888102f41840 RCX: 0000000000000027
[    1.740853] RDX: 00000000000000ff RSI: 0000000000000020 RDI: ffff888102f41800
[    1.741226] RBP: ffffc9000027ba20 R08: ffff88817bc18440 R09: ffffc9000027b808
[    1.741600] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888102f41840
[    1.741976] R13: 00000000fffffffb R14: ffff888102f41800 R15: ffff8881008b0000
[    1.742351] FS:  00007fda3a38a8c0(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000
[    1.742774] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.743076] CR2: ffffffffffffffd6 CR3: 00000001021ec000 CR4: 00000000000006f0
[    1.743452] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    1.743828] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    1.744206] Call Trace:
[    1.744339]  isac_release+0xcc/0xe0 [mISDNipac]
[    1.744582]  fritzpci_probe.cold+0x282/0x739 [avmfritz]
[    1.744861]  local_pci_probe+0x48/0x80
[    1.745063]  pci_device_probe+0x10f/0x1c0
[    1.745278]  really_probe+0xfb/0x420
[    1.745471]  driver_probe_device+0xe9/0x160
[    1.745693]  device_driver_attach+0x5d/0x70
[    1.745917]  __driver_attach+0x8f/0x150
[    1.746123]  ? device_driver_attach+0x70/0x70
[    1.746354]  bus_for_each_dev+0x7e/0xc0
[    1.746560]  driver_attach+0x1e/0x20
[    1.746751]  bus_add_driver+0x152/0x1f0
[    1.746957]  driver_register+0x74/0xd0
[    1.747157]  ? 0xffffffffc00d8000
[    1.747334]  __pci_register_driver+0x54/0x60
[    1.747562]  AVM_init+0x36/0x1000 [avmfritz]
[    1.747791]  do_one_initcall+0x48/0x1d0
[    1.747997]  ? __cond_resched+0x19/0x30
[    1.748206]  ? kmem_cache_alloc_trace+0x390/0x440
[    1.748458]  ? do_init_module+0x28/0x250
[    1.748669]  do_init_module+0x62/0x250
[    1.748870]  load_module+0x23ee/0x26a0
[    1.749073]  __do_sys_finit_module+0xc2/0x120
[    1.749307]  ? __do_sys_finit_module+0xc2/0x120
[    1.749549]  __x64_sys_finit_module+0x1a/0x20
[    1.749782]  do_syscall_64+0x38/0x90

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: tool: Fix a python tuple typing error

[ Upstream commit 7421b1a4d10c633ca5f14c8236d3e2c1de07e52b ]

The first argument to namedtuple() should match the name of the type,
which wasn't the case for KconfigEntryBase.

Fixing this is enough to make mypy show no python typing errors again.

Fixes 97752c39bd ("kunit: kunit_tool: Allow .kunitconfig to disable config items")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: pxa168_eth: Fix a potential data race in pxa168_eth_remove

[ Upstream commit 0571a753cb07982cc82f4a5115e0b321da89e1f3 ]

pxa168_eth_remove() firstly calls unregister_netdev(),
then cancels a timeout work. unregister_netdev() shuts down a device
interface and removes it from the kernel tables. If the timeout occurs
in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop
and open of the device. It may lead to an inconsistent state and memory
leaks.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Pavel Andrianov <andrianov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Enforce minimum value check for ICOSQ size

[ Upstream commit 5115daa675ccf70497fe56e8916cf738d8212c10 ]

The ICOSQ size should not go below MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE.
Enforce this where it's missing.

Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, x86: Use kvmalloc_array instead kmalloc_array in bpf_jit_comp

[ Upstream commit de920fc64cbaa031f947e9be964bda05fd090380 ]

x86 bpf_jit_comp.c used kmalloc_array to store jited addresses
for each bpf insn. With a large bpf program, we have see the
following allocation failures in our production server:

    page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP),
                             nodemask=(null),cpuset=/,mems_allowed=0"
    Call Trace:
    dump_stack+0x50/0x70
    warn_alloc.cold.120+0x72/0xd2
    ? __alloc_pages_direct_compact+0x157/0x160
    __alloc_pages_slowpath+0xcdb/0xd00
    ? get_page_from_freelist+0xe44/0x1600
    ? vunmap_page_range+0x1ba/0x340
    __alloc_pages_nodemask+0x2c9/0x320
    kmalloc_order+0x18/0x80
    kmalloc_order_trace+0x1d/0xa0
    bpf_int_jit_compile+0x1e2/0x484
    ? kmalloc_order_trace+0x1d/0xa0
    bpf_prog_select_runtime+0xc3/0x150
    bpf_prog_load+0x480/0x720
    ? __mod_memcg_lruvec_state+0x21/0x100
    __do_sys_bpf+0xc31/0x2040
    ? close_pdeo+0x86/0xe0
    do_syscall_64+0x42/0x110
    entry_SYSCALL_64_after_hwframe+0x44/0xa9
    RIP: 0033:0x7f2f300f7fa9
    Code: Bad RIP value.

Dumped assembly:

    ffffffff810b6d70 <bpf_int_jit_compile>:
    ; {
    ffffffff810b6d70: e8 eb a5 b4 00        callq   0xffffffff81c01360 <__fentry__>
    ffffffff810b6d75: 41 57                 pushq   %r15
    ...
    ffffffff810b6f39: e9 72 fe ff ff        jmp     0xffffffff810b6db0 <bpf_int_jit_compile+0x40>
    ;       addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
    ffffffff810b6f3e: 8b 45 0c              movl    12(%rbp), %eax
    ;       return __kmalloc(bytes, flags);
    ffffffff810b6f41: be c0 0c 00 00        movl    $3264, %esi
    ;       addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
    ffffffff810b6f46: 8d 78 01              leal    1(%rax), %edi
    ;       if (unlikely(check_mul_overflow(n, size, &bytes)))
    ffffffff810b6f49: 48 c1 e7 02           shlq    $2, %rdi
    ;       return __kmalloc(bytes, flags);
    ffffffff810b6f4d: e8 8e 0c 1d 00        callq   0xffffffff81287be0 <__kmalloc>
    ;       if (!addrs) {
    ffffffff810b6f52: 48 85 c0              testq   %rax, %rax

Change kmalloc_array() to kvmalloc_array() to avoid potential
allocation error for big bpf programs.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210309015647.3657852-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: intel-hid: Support Lenovo ThinkPad X1 Tablet Gen 2

[ Upstream commit 56678a5f44ef5f0ad9a67194bbee2280c6286534 ]

Like a few other system the Lenovo ThinkPad X1 Tablet Gen 2 miss the
HEBC method, which prevent the power button from working. Add a quirk
to enable the button array on this system family and fix the power
button.

Signed-off-by: Alban Bedel <albeu@free.fr>
Tested-by: Alexander Kobel <a-kobel@a-kobel.de>
Link: https://lore.kernel.org/r/20210222141559.3775-1-albeu@free.fr
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Fix warning on unbind if reset is not deasserted

[ Upstream commit a7b5d7c4969aba8d1f04c29048906abaa71fb6a9 ]

We currently get thefollowing on driver unbind if a reset is configured
and asserted:

WARNING: CPU: 0 PID: 993 at drivers/reset/core.c:432 reset_control_assert
...
(reset_control_assert) from [<c0fecda8>] (sysc_remove+0x190/0x1e4)
(sysc_remove) from [<c0a2bb58>] (platform_remove+0x24/0x3c)
(platform_remove) from [<c0a292fc>] (__device_release_driver+0x154/0x214)
(__device_release_driver) from [<c0a2a210>] (device_driver_detach+0x3c/0x8c)
(device_driver_detach) from [<c0a27d64>] (unbind_store+0x60/0xd4)
(unbind_store) from [<c0546bec>] (kernfs_fop_write_iter+0x10c/0x1cc)

Let's fix it by checking the reset status.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am33xx: add aliases for mmc interfaces

[ Upstream commit 9bbce32a20d6a72c767a7f85fd6127babd1410ac ]

Without DT aliases, the numbering of mmc interfaces is unpredictable.
Adding them makes it possible to refer to devices consistently.  The
popular suggestion to use UUIDs obviously doesn't work with a blank
device fresh from the factory.

See commit fa2d0aa96941 ("mmc: core: Allow setting slot index via
device tree alias") for more discussion.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.10.28

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Andrei Rabusov <a.rabusov@tum.de>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20210405085031.040238881@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Use NOP_ATOMIC5 instead of emit_nops(&prog, 5) for BPF_TRAMP_F_CALL_ORIG

commit b9082970478009b778aa9b22d5561eef35b53b63 upstream.

__bpf_arch_text_poke does rewrite only for atomic nop5, emit_nops(xxx, 5)
emits non-atomic one which breaks fentry/fexit with k8 atomics:

P6_NOP5 == P6_NOP5_ATOMIC (0f1f440000 == 0f1f440000)
K8_NOP5 != K8_NOP5_ATOMIC (6666906690 != 6666666690)

Can be reproduced by doing "ideal_nops = k8_nops" in "arch_init_ideal_nops()
and running fexit_bpf2bpf selftest.

Fixes: e21aa341785c ("bpf: Fix fexit trampoline.")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210320000001.915366-1-sdf@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing"

commit d3dc04cd81e0eaf50b2d09ab051a13300e587439 upstream.

This reverts commit 15b2219facadec583c24523eed40fa45865f859f.

Before IO threads accepted signals, the freezer using take signals to wake
up an IO thread would cause them to loop without any way to clear the
pending signal. That is no longer the case, so stop special casing
PF_IO_WORKER in the freezer.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: evaluate put_user() arg before enabling user access

commit 285a76bb2cf51b0c74c634f2aaccdb93e1f2a359 upstream.

The <asm/uaccess.h> header has a problem with put_user(a, ptr) if
the 'a' is not a simple variable, such as a function. This can lead
to the compiler producing code as so:

1: enable_user_access()
2: evaluate 'a' into register 'r'
3: put 'r' to 'ptr'
4: disable_user_acess()

The issue is that 'a' is now being evaluated with the user memory
protections disabled. So we try and force the evaulation by assigning
'x' to __val at the start, and hoping the compiler barriers in
 enable_user_access() do the job of ordering step 2 before step 1.

This has shown up in a bug where 'a' sleeps and thus schedules out
and loses the SR_SUM flag. This isn't sufficient to fully fix, but
should reduce the window of opportunity. The first instance of this
we found is in scheudle_tail() where the code does:

$ less -N kernel/sched/core.c

4263  if (current->set_child_tid)
4264         put_user(task_pid_vnr(current), current->set_child_tid);

Here, the task_pid_vnr(current) is called within the block that has
enabled the user memory access. This can be made worse with KASAN
which makes task_pid_vnr() a rather large call with plenty of
opportunity to sleep.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reported-by: syzbot+e74b94fe601ab9552d69@syzkaller.appspotmail.com
Suggested-by: Arnd Bergman <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
--
Changes since v1:
- fixed formatting and updated the patch description with more info

Changes since v2:
- fixed commenting on __put_user() (schwab@linux-m68k.org)

Change since v3:
- fixed RFC in patch title. Should be ready to merge.

Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

drivers: video: fbcon: fix NULL dereference in fbcon_cursor()

commit 01faae5193d6190b7b3aa93dae43f514e866d652 upstream.

add null-check on function pointer before dereference on ops->cursor

Reported-by: syzbot+b67aaae8d3a927f68d20@syzkaller.appspotmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Du Cheng <ducheng2@gmail.com>
Link: https://lore.kernel.org/r/20210312081421.452405-1-ducheng2@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: clear deferred probe reason on probe retry

commit f0acf637d60ffcef3ccb6e279f743e587b3c7359 upstream.

When retrying a deferred probe, any old defer reason string should be
discarded. Otherwise, if the probe is deferred again at a different spot,
but without setting a message, the now incorrect probe reason will remain.

This was observed with the i.MX I2C driver, which ultimately failed
to probe due to lack of the GPIO driver. The probe defer for GPIO
doesn't record a message, but a previous probe defer to clock_get did.
This had the effect that /sys/kernel/debug/devices_deferred listed
a misleading probe deferral reason.

Cc: stable <stable@vger.kernel.org>
Fixes: d090b70ede02 ("driver core: add deferring probe reason to devices_deferred property")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20210319110459.19966-1-a.fatoum@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Change state information from u16 to u8

commit e78836ae76d20f38eed8c8c67f21db97529949da upstream.

The "u16 CcxRmState[2];" array field in struct "rtllib_network" has 4
bytes in total while the operations performed on this array through-out
the code base are only 2 bytes.

The "CcxRmState" field is fed only 2 bytes of data using memcpy():

(In rtllib_rx.c:1972)
memcpy(network->CcxRmState, &info_element->data[4], 2)

With "info_element->data[]" being a u8 array, if 2 bytes are written
into "CcxRmState" (whose one element is u16 size), then the 2 u8
elements from "data[]" gets squashed and written into the first element
("CcxRmState[0]") while the second element ("CcxRmState[1]") is never
fed with any data.

Same in file rtllib_rx.c:2522:
 memcpy(dst->CcxRmState, src->CcxRmState, 2);

The above line duplicates "src" data to "dst" but only writes 2 bytes
(and not 4, which is the actual size). Again, only 1st element gets the
value while the 2nd element remains uninitialized.

This later makes operations done with CcxRmState unpredictable in the
following lines as the 1st element is having a squashed number while the
2nd element is having an uninitialized random number.

rtllib_rx.c:1973:    if (network->CcxRmState[0] != 0)
rtllib_rx.c:1977:    network->MBssidMask = network->CcxRmState[1] & 0x07;

network->MBssidMask is also of type u8 and not u16.

Fix this by changing the type of "CcxRmState" from u16 to u8 so that the
data written into this array and read from it make sense and are not
random values.

NOTE: The wrong initialization of "CcxRmState" can be seen in the
following commit:

commit ecdfa44610fa ("Staging: add Realtek 8192 PCI wireless driver")

The above commit created a file `rtl8192e/ieee80211.h` which used to
have the faulty line. The file has been deleted (or possibly renamed)
with the contents copied in to a new file `rtl8192e/rtllib.h` along with
additional code in the commit 94a799425eee (tagged in Fixes).

Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Cc: stable@vger.kernel.org
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210323113413.29179-2-atulgopinathan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix incorrect source in memcpy()

commit 72ad25fbbb78930f892b191637359ab5b94b3190 upstream.

The variable "info_element" is of the following type:

struct rtllib_info_element *info_element

defined in drivers/staging/rtl8192e/rtllib.h:

struct rtllib_info_element {
u8 id;
u8 len;
u8 data[];
} __packed;

The "len" field defines the size of the "data[]" array. The code is
supposed to check if "info_element->len" is greater than 4 and later
equal to 6. If this is satisfied then, the last two bytes (the 4th and
5th element of u8 "data[]" array) are copied into "network->CcxRmState".

Right now the code uses "memcpy()" with the source as "&info_element[4]"
which would copy in wrong and unintended information. The struct
"rtllib_info_element" has a size of 2 bytes for "id" and "len",
therefore indexing will be done in interval of 2 bytes. So,
"info_element[4]" would point to data which is beyond the memory
allocated for this pointer (that is, at x+8, while "info_element" has
been allocated only from x to x+7 (2 + 6 => 8 bytes)).

This patch rectifies this error by using "&info_element->data[4]" which
correctly copies the last two bytes of "data[]".

NOTE: The faulty line of code came from the following commit:

commit ecdfa44610fa ("Staging: add Realtek 8192 PCI wireless driver")

The above commit created the file `rtl8192e/ieee80211/ieee80211_rx.c`
which had the faulty line of code. This file has been deleted (or
possibly renamed) with the contents copied in to a new file
`rtl8192e/rtllib_rx.c` along with additional code in the commit
94a799425eee (tagged in Fixes).

Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Cc: stable@vger.kernel.org
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210323113413.29179-1-atulgopinathan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: qcom-geni-se: Cleanup the code to remove proxy votes

commit 29d96eb261345c8d888e248ae79484e681be2faa upstream.

This reverts commit 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect
support to fix earlycon crash")

ICC core and platforms drivers supports sync_state feature, which
ensures that the default ICC BW votes from the bootloader is not
removed until all it's consumers are probes.

The proxy votes were needed in case other QUP child drivers
I2C, SPI probes before UART, they can turn off the QUP-CORE clock
which is shared resources for all QUP driver, this causes unclocked
access to HW from earlycon.

Given above support from ICC there is no longer need to maintain
proxy votes on QUP-CORE ICC node from QUP wrapper driver for early
console usecase, the default votes won't be removed until real
console is probed.

Cc: stable@vger.kernel.org
Fixes: 266cd33b5913 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced")
Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state")
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210324101836.25272-2-rojay@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable

commit 5aef629704ad4d983ecf5c8a25840f16e45b6d59 upstream.

Ensure that dep->flags are cleared until after stop active transfers
is completed.  Otherwise, the ENDXFER command will not be executed
during ep disable.

Fixes: f09ddcfcb8c5 ("usb: dwc3: gadget: Prevent EP queuing while stopping transfers")
Cc: stable <stable@vger.kernel.org>
Reported-and-tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1616610664-16495-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: qcom: skip interconnect init for ACPI probe

commit 5e4010e36a58978e42b2ee13739ff9b50209c830 upstream.

The ACPI probe starts failing since commit bea46b981515 ("usb: dwc3:
qcom: Add interconnect support in dwc3 driver"), because there is no
interconnect support for ACPI, and of_icc_get() call in
dwc3_qcom_interconnect_init() will just return -EINVAL.

Fix the problem by skipping interconnect init for ACPI probe, and then
the NULL icc_path_ddr will simply just scheild all ICC calls.

Fixes: bea46b981515 ("usb: dwc3: qcom: Add interconnect support in dwc3 driver")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311060318.25418-1-shawn.guo@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: Prevent core suspend when port connection flag is 0

commit 93f672804bf2d7a49ef3fd96827ea6290ca1841e upstream.

In host mode port connection status flag is "0" when loading
the driver. After loading the driver system asserts suspend
which is handled by "_dwc2_hcd_suspend()" function. Before
the system suspend the port connection status is "0". As
result need to check the "port_connect_status" if it is "0",
then skipping entering to suspend.

Cc: <stable@vger.kernel.org> # 5.2
Fixes: 6f6d70597c15 ("usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE")
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210326102510.BDEDEA005D@mailhost.synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board.

commit 5e3bbae8ee3d677a0aa2919dc62b5c60ea01ba61 upstream.

Increased the waiting timeout for HPRT0.PrtSusp register field
to be set, because on HiKey 960 board HPRT0.PrtSusp wasn't
generated with the existing timeout.

Cc: <stable@vger.kernel.org> # 4.18
Fixes: 22bb5cfdf13a ("usb: dwc2: Fix host exit from hibernation flow.")
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/20210326102447.8F7FEA005D@mailhost.synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: amd5536udc_pci fix null-ptr-dereference

commit 72035f4954f0bca2d8c47cf31b3629c42116f5b7 upstream.

init_dma_pools() calls dma_pool_create(...dev->dev) to create dma pool.
however, dev->dev is actually set after calling init_dma_pools(), which
effectively makes dma_pool_create(..NULL) and cause crash.
To fix this issue, init dma only after dev->dev is set.

[    1.317993] RIP: 0010:dma_pool_create+0x83/0x290
[    1.323257] Call Trace:
[    1.323390]  ? pci_write_config_word+0x27/0x30
[    1.323626]  init_dma_pools+0x41/0x1a0 [snps_udc_core]
[    1.323899]  udc_pci_probe+0x202/0x2b1 [amd5536udc_pci]

Fixes: 7c51247a1f62 (usb: gadget: udc: Provide correct arguments for 'dma_pool_create')
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210317230400.357756-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: fix use-after-free after probe failure

commit 4e49bf376c0451ad2eae2592e093659cde12be9a upstream.

If tty-device registration fails the driver would fail to release the
data interface. When the device is later disconnected, the disconnect
callback would still be called for the data interface and would go about
releasing already freed resources.

Fixes: c93d81955005 ("usb: cdc-acm: fix error handling in acm_probe()")
Cc: stable@vger.kernel.org # 3.9
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210322155318.9837-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: fix double free on probe failure

commit 7180495cb3d0e2a2860d282a468b4146c21da78f upstream.

If tty-device registration fails the driver copy of any Country
Selection functional descriptor would end up being freed twice; first
explicitly in the error path and then again in the tty-port destructor.

Drop the first erroneous free that was left when fixing a tty-port
resource leak.

Fixes: cae2bc768d17 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail")
Cc: stable@vger.kernel.org # 4.19
Cc: Jaejoong Kim <climbbb.kim@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210322155318.9837-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: downgrade message to debug

commit e4c77070ad45fc940af1d7fb1e637c349e848951 upstream.

This failure is so common that logging an error here amounts
to spamming log files.

Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311130126.15972-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: untangle a circular dependency between callback and softint

commit 6069e3e927c8fb3a1947b07d1a561644ea960248 upstream.

We have a cycle of callbacks scheduling works which submit
URBs with thos callbacks. This needs to be blocked, stopped
and unblocked to untangle the circle.

The issue leads to faults like:

[   55.068392] Unable to handle kernel paging request at virtual address 6b6b6c03
[   55.075624] pgd = be866494
[   55.078335] [6b6b6c03] *pgd=00000000
[   55.081924] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[   55.087238] Modules linked in: ppp_async crc_ccitt ppp_generic slhc
xt_TCPMSS xt_tcpmss xt_hl nf_log_ipv6 nf_log_ipv4 nf_log_common
xt_policy xt_limit xt_conntrack xt_tcpudp xt_pkttype ip6table_mangle
iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4
iptable_mangle ip6table_filter ip6_tables iptable_filter ip_tables
des_generic md5 sch_fq_codel cdc_mbim cdc_wdm cdc_ncm usbnet mii
cdc_acm usb_storage ip_tunnel xfrm_user xfrm6_tunnel tunnel6
xfrm4_tunnel tunnel4 esp6 esp4 ah6 ah4 xfrm_algo xt_LOG xt_LED
xt_comment x_tables ipv6
[   55.134954] CPU: 0 PID: 82 Comm: kworker/0:2 Tainted: G
   T 5.8.17 #1
[   55.142526] Hardware name: Freescale i.MX7 Dual (Device Tree)
[   55.148304] Workqueue: events acm_softint [cdc_acm]
[   55.153196] PC is at kobject_get+0x10/0xa4
[   55.157302] LR is at usb_get_dev+0x14/0x1c
[   55.161402] pc : [<8047c06c>]    lr : [<80560448>]    psr: 20000193
[   55.167671] sp : bca39ea8  ip : 00007374  fp : bf6cbd80
[   55.172899] r10: 00000000  r9 : bdd92284  r8 : bdd92008
[   55.178128] r7 : 6b6b6b6b  r6 : fffffffe  r5 : 60000113  r4 : 6b6b6be3
[   55.184658] r3 : 6b6b6b6b  r2 : 00000111  r1 : 00000000  r0 : 6b6b6be3
[   55.191191] Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM Segment none
[   55.198417] Control: 10c5387d  Table: bcf0c06a  DAC: 00000051
[   55.204168] Process kworker/0:2 (pid: 82, stack limit = 0x9bdd2a89)
[   55.210439] Stack: (0xbca39ea8 to 0xbca3a000)
[   55.214805] 9ea0:                   bf6cbd80 80769a50 6b6b6b6b 80560448 bdeb0500 8056bfe8
[   55.222991] 9ec0: 00000002 b76da000 00000000 bdeb0500 bdd92448 bca38000 bdeb0510 8056d69c
[   55.231177] 9ee0: bca38000 00000000 80c050fc 00000000 bca39f44 09d42015 00000000 00000001
[   55.239363] 9f00: bdd92448 bdd92438 bdd92000 7f1158c4 bdd92448 bca2ee00 bf6cbd80 bf6cef00
[   55.247549] 9f20: 00000000 00000000 00000000 801412d8 bf6cbd98 80c03d00 bca2ee00 bf6cbd80
[   55.255735] 9f40: bca2ee14 bf6cbd98 80c03d00 00000008 bca38000 80141568 00000000 80c446ae
[   55.263921] 9f60: 00000000 bc9ed880 bc9f0700 bca38000 bc117eb4 80141524 bca2ee00 bc9ed8a4
[   55.272107] 9f80: 00000000 80147cc8 00000000 bc9f0700 80147b84 00000000 00000000 00000000
[   55.280292] 9fa0: 00000000 00000000 00000000 80100148 00000000 00000000 00000000 00000000
[   55.288477] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   55.296662] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   55.304860] [<8047c06c>] (kobject_get) from [<80560448>] (usb_get_dev+0x14/0x1c)
[   55.312271] [<80560448>] (usb_get_dev) from [<8056bfe8>] (usb_hcd_unlink_urb+0x50/0xd8)
[   55.320286] [<8056bfe8>] (usb_hcd_unlink_urb) from [<8056d69c>] (usb_kill_urb.part.0+0x44/0xd0)
[   55.329004] [<8056d69c>] (usb_kill_urb.part.0) from [<7f1158c4>] (acm_softint+0x4c/0x10c [cdc_acm])
[   55.338082] [<7f1158c4>] (acm_softint [cdc_acm]) from [<801412d8>] (process_one_work+0x19c/0x3e8)
[   55.346969] [<801412d8>] (process_one_work) from [<80141568>] (worker_thread+0x44/0x4dc)
[   55.355072] [<80141568>] (worker_thread) from [<80147cc8>] (kthread+0x144/0x180)
[   55.362481] [<80147cc8>] (kthread) from [<80100148>] (ret_from_fork+0x14/0x2c)
[   55.369706] Exception stack(0xbca39fb0 to 0xbca39ff8)

Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311130126.15972-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdc-acm: fix BREAK rx code path adding necessary calls

commit 08dff274edda54310d6f1cf27b62fddf0f8d146e upstream.

Counting break events is nice but we should actually report them to
the tty layer.

Fixes: 5a6a62bdb9257 ("cdc-acm: add TIOCMIWAIT")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20210311133714.31881-1-oneukum@suse.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci-mtk: fix broken streams issue on 0.96 xHCI

commit 6f978a30c9bb12dab1302d0f06951ee290f5e600 upstream.

The MediaTek 0.96 xHCI controller on some platforms does not
support bulk stream even HCCPARAMS says supporting, due to MaxPSASize
is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS
quirk to fix it.

Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1616482975-17841-4-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: Fix suspend with devices connected for a64

commit 92af4fc6ec331228aca322ca37c8aea7b150a151 upstream.

Pinephone running on Allwinner A64 fails to suspend with USB devices
connected as reported by Bhushan Shah <bshah@kde.org>. Reverting
commit 5fbf7a253470 ("usb: musb: fix idling for suspend after
disconnect interrupt") fixes the issue.

Let's add suspend checks also for suspend after disconnect interrupt
quirk handling like we already do elsewhere.

Fixes: 5fbf7a253470 ("usb: musb: fix idling for suspend after disconnect interrupt")
Reported-by: Bhushan Shah <bshah@kde.org>
Tested-by: Bhushan Shah <bshah@kde.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210324071142.42264-1-tony@atomide.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem

commit 0bd860493f81eb2a46173f6f5e44cc38331c8dbd upstream.

This LTE modem (M.2 card) has a bug in its power management:
there is some kind of race condition for U3 wake-up between the host and
the device. The modem firmware sometimes crashes/locks when both events
happen at the same time and the modem fully drops off the USB bus (and
sometimes re-enumerates, sometimes just gets stuck until the next
reboot).

Tested with the modem wired to the XHCI controller on an AMD 3015Ce
platform. Without the patch, the modem dropped of the USB bus 5 times in
3 days. With the quirk, it stayed connected for a week while the
'runtime_suspended_time' counter incremented as excepted.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Link: https://lore.kernel.org/r/20210319124802.2315195-1-vpalatin@chromium.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control()

commit 1cc5ed25bdade86de2650a82b2730108a76de20c upstream.

Fix shift out-of-bounds in vhci_hub_control() SetPortFeature handling.

UBSAN: shift-out-of-bounds in drivers/usb/usbip/vhci_hcd.c:605:42
shift exponent 768 is too large for 32-bit type 'int'

Reported-by: syzbot+3dea30b047f41084de66@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210324230654.34798-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firewire: nosy: Fix a use-after-free bug in nosy_ioctl()

[ Upstream commit 829933ef05a951c8ff140e814656d73e74915faf ]

For each device, the nosy driver allocates a pcilynx structure.
A use-after-free might happen in the following scenario:

 1. Open nosy device for the first time and call ioctl with command
    NOSY_IOC_START, then a new client A will be malloced and added to
    doubly linked list.
 2. Open nosy device for the second time and call ioctl with command
    NOSY_IOC_START, then a new client B will be malloced and added to
    doubly linked list.
 3. Call ioctl with command NOSY_IOC_START for client A, then client A
    will be readded to the doubly linked list. Now the doubly linked
    list is messed up.
 4. Close the first nosy device and nosy_release will be called. In
    nosy_release, client A will be unlinked and freed.
 5. Close the second nosy device, and client A will be referenced,
    resulting in UAF.

The root cause of this bug is that the element in the doubly linked list
is reentered into the list.

Fix this bug by adding a check before inserting a client.  If a client
is already in the linked list, don't insert it.

The following KASAN report reveals it:

   BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210
   Write of size 8 at addr ffff888102ad7360 by task poc
   CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6
   Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
   Call Trace:
     nosy_release+0x1ea/0x210
     __fput+0x1e2/0x840
     task_work_run+0xe8/0x180
     exit_to_user_mode_prepare+0x114/0x120
     syscall_exit_to_user_mode+0x1d/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   Allocated by task 337:
     nosy_open+0x154/0x4d0
     misc_open+0x2ec/0x410
     chrdev_open+0x20d/0x5a0
     do_dentry_open+0x40f/0xe80
     path_openat+0x1cf9/0x37b0
     do_filp_open+0x16d/0x390
     do_sys_openat2+0x11d/0x360
     __x64_sys_open+0xfd/0x1a0
     do_syscall_64+0x33/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   Freed by task 337:
     kfree+0x8f/0x210
     nosy_release+0x158/0x210
     __fput+0x1e2/0x840
     task_work_run+0xe8/0x180
     exit_to_user_mode_prepare+0x114/0x120
     syscall_exit_to_user_mode+0x1d/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128
   The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380)

[ Modified to use 'list_empty()' inside proper lock  - Linus ]

Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/
Reported-and-tested-by: 马哲宇 (Zheyu Ma) <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: hyperv_fb: Fix a double free in hvfb_probe

[ Upstream commit 37df9f3fedb6aeaff5564145e8162aab912c9284 ]

Function hvfb_probe() calls hvfb_getmem(), expecting upon return that
info->apertures is either NULL or points to memory that should be freed
by framebuffer_release().  But hvfb_getmem() is freeing the memory and
leaving the pointer non-NULL, resulting in a double free if an error
occurs or later if hvfb_remove() is called.

Fix this by removing all kfree(info->apertures) calls in hvfb_getmem().
This will allow framebuffer_release() to free the memory, which follows
the pattern of other fbdev drivers.

Fixes: 3a6fb6c4255c ("video: hyperv: hyperv_fb: Use physical memory for fb on HyperV Gen 1 VMs.")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210324103724.4189-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: pci: Enable dis_uX_susphy_quirk for Intel Merrifield

[ Upstream commit b522f830d35189e0283fa4d5b4b3ef8d7a78cfcb ]

It seems that on Intel Merrifield platform the USB PHY shouldn't be suspended.
Otherwise it can't be enabled by simply change the cable in the connector.

Enable corresponding quirk for the platform in question.

Fixes: e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression")
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210322125244.79407-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0

[ Upstream commit 2e8496f31d0be8f43849b2980b069f3a9805d047 ]

Clean up COMMAND_RECONFIG_FLAG_PARTIAL flag by resetting it to 0, which
aligns with the firmware settings.

Fixes: 36847f9e3e56 ("firmware: stratix10-svc: correct reconfig flag and timeout values")
Signed-off-by: Richard Gong <richard.gong@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: Fix error handling in extcon_dev_register

[ Upstream commit d3bdd1c3140724967ca4136755538fa7c05c2b4e ]

When devm_kcalloc() fails, we should execute device_unregister()
to unregister edev->dev from system.

Fixes: 046050f6e623e ("extcon: Update the prototype of extcon_register_notifier() with enum extcon")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: Add stubs for extcon_register_notifier_all() functions

[ Upstream commit c9570d4a5efd04479b3cd09c39b571eb031d94f4 ]

Add stubs for extcon_register_notifier_all() function for !CONFIG_EXTCON
case.  This is useful for compile testing and for drivers which use
EXTCON but do not require it (therefore do not depend on CONFIG_EXTCON).

Fixes: 815429b39d94 ("extcon: Add new extcon_register_notifier_all() to monitor all external connectors")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: rockchip: fix restore error in resume

commit c971af25cda94afe71617790826a86253e88eab0 upstream.

The restore in resume should match to suspend which only set for RK3288
SoCs pinctrl.

Fixes: 8dca933127024 ("pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume")
Reviewed-by: Jianqun Xu <jay.xu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Wang Panzhenzhuan <randy.wang@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210223100725.269240-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfio/nvlink: Add missing SPAPR_TCE_IOMMU depends

commit e0146a108ce4d2c22b9510fd12268e3ee72a0161 upstream.

Compiling the nvlink stuff relies on the SPAPR_TCE_IOMMU otherwise there
are compile errors:

 drivers/vfio/pci/vfio_pci_nvlink2.c:101:10: error: implicit declaration of function 'mm_iommu_put' [-Werror,-Wimplicit-function-declaration]
                            ret = mm_iommu_put(data->mm, data->mem);

As PPC only defines these functions when the config is set.

Previously this wasn't a problem by chance as SPAPR_TCE_IOMMU was the only
IOMMU that could have satisfied IOMMU_API on POWERNV.

Fixes: 179209fa1270 ("vfio: IOMMU_API should be selected")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <0-v1-83dba9768fc3+419-vfio_nvlink2_kconfig_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/tegra: sor: Grab runtime PM reference across reset

commit ac097aecfef0bb289ca53d2fe0b73fc7e1612a05 upstream.

The SOR resets are exclusively shared with the SOR power domain. This
means that exclusive access can only be granted temporarily and in order
for that to work, a rigorous sequence must be observed. To ensure that a
single consumer gets exclusive access to a reset, each consumer must
implement a rigorous protocol using the reset_control_acquire() and
reset_control_release() functions.

However, these functions alone don't provide any guarantees at the
system level. Drivers need to ensure that the only a single consumer has
access to the reset at the same time. In order for the SOR to be able to
exclusively access its reset, it must therefore ensure that the SOR
power domain is not powered off by holding on to a runtime PM reference
to that power domain across the reset assert/deassert operation.

This used to work fine by accident, but was revealed when recently more
devices started to rely on the SOR power domain.

Fixes: 11c632e1cfd3 ("drm/tegra: sor: Implement acquire/release for reset")
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/tegra: dc: Restore coupling of display controllers

commit a31500fe7055451ed9043c8fff938dfa6f70ee37 upstream.

Coupling of display controllers used to rely on runtime PM to take the
companion controller out of reset. Commit fd67e9c6ed5a ("drm/tegra: Do
not implement runtime PM") accidentally broke this when runtime PM was
removed.

Restore this functionality by reusing the hierarchical host1x client
suspend/resume infrastructure that's similar to runtime PM and which
perfectly fits this use-case.

Fixes: fd67e9c6ed5a ("drm/tegra: Do not implement runtime PM")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Reported-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>