scsi: libfc: fc_disc: Fix-up some incorrectly referenced function parameters

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/libfc/fc_disc.c:343: warning: Function parameter or member 'disc' not described in 'fc_disc_gpn_ft_req'
 drivers/scsi/libfc/fc_disc.c:343: warning: Excess function parameter 'lport' description in 'fc_disc_gpn_ft_req'
 drivers/scsi/libfc/fc_disc.c:380: warning: Function parameter or member 'disc' not described in 'fc_disc_gpn_ft_parse'
 drivers/scsi/libfc/fc_disc.c:380: warning: Excess function parameter 'lport' description in 'fc_disc_gpn_ft_parse'
 drivers/scsi/libfc/fc_disc.c:498: warning: Function parameter or member 'disc_arg' not described in 'fc_disc_gpn_ft_resp'
 drivers/scsi/libfc/fc_disc.c:498: warning: Excess function parameter 'lp_arg' description in 'fc_disc_gpn_ft_resp'

Link: https://lore.kernel.org/r/20200707140055.2956235-10-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pcmcia: nsp_cs: Remove unused variable 'dummy'

There is no need to populate an unused variable, even if the read is
required.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pcmcia/nsp_cs.c: In function ‘nsp_cs_message’:
 drivers/scsi/pcmcia/nsp_cs.c:143:2: warning: function ‘nsp_cs_message’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
 drivers/scsi/pcmcia/nsp_cs.c: In function ‘nsp_fifo_count’:
 drivers/scsi/pcmcia/nsp_cs.c:692:24: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200707140055.2956235-9-lee.jones@linaro.org
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pcmcia: nsp_cs: Use new __printf() format notation

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pcmcia/nsp_cs.c: In function ‘nsp_cs_message’:
 drivers/scsi/pcmcia/nsp_cs.c:143:2: warning: function ‘nsp_cs_message’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
 drivers/scsi/pcmcia/nsp_cs.c: In function ‘nsp_fifo_count’:
 drivers/scsi/pcmcia/nsp_cs.c:692:24: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200707140055.2956235-8-lee.jones@linaro.org
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aha152x: Remove unused variable 'ret'

Looks to be unused since 2014.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aha152x.c: In function ‘datai_run’:
 drivers/scsi/aha152x.c:2033:9: warning: variable ‘data’ set but not used [-Wunused-but-set-variable]
 2033 | int data;
 | ^~~~

Link: https://lore.kernel.org/r/20200707140055.2956235-7-lee.jones@linaro.org
Cc: "Juergen E. Fischer" <fischer@norbit.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fdomain: Mark 'fdomain_pm_ops' as __maybe_unused

Not all source files which include 'fdomain.h' make use of 'fdomain_pm_ops'
leaving them defined but unused.  Mark it as __maybe_unused to tell the
compiler this is not only acceptable, but expected.

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/scsi/pcmcia/fdomain_cs.c:16:
 drivers/scsi/fdomain.h:106:32: warning: ‘fdomain_pm_ops’ defined but not used [-Wunused-const-variable=]
 106 | static const struct dev_pm_ops fdomain_pm_ops;
 | ^~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200707140055.2956235-4-lee.jones@linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Change upiu_flags to be u8

According to the UFS Spec, the Flags field in the UPIU is one byte in size,
not 4. Change it to be u8.

Link: https://lore.kernel.org/r/20200706123936.24799-1-huobean@gmail.com
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Fix kdoc comments format

Fix kdoc comments format to avoid compiler warnings when compiling with
W=1.

No functional changes.

Link: https://lore.kernel.org/r/20200706123358.452180-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Fix set but unused variable

In _config_request(), the variable issue_reset is set using the macro
mpt3sas_check_cmd_timeout() but otherwise unused, causing a compiler
warning when compiling with W=1. Avoid this warning by removing this
variable, using the function mpt3sas_base_check_cmd_timeout() directly
instead of the mpt3sas_check_cmd_timeout() macro.

Link: https://lore.kernel.org/r/20200706123356.452135-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sd_zbc: Fix kdoc comment format

Fix the kdoc comment of the function sd_zbc_check_capacity() to avoid a
compiler warning when compiling with W=1.

No functional changes.

Link: https://lore.kernel.org/r/20200706123355.452091-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sd: Fix kdoc comment format

Fix the kdoc comment of the function sd_ioctl_common() to avoid a compiler
warning when compiling with W=1.

No functional changes.

Link: https://lore.kernel.org/r/20200706123354.452047-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid: Remove set but unused variable

In mega_is_bios_enabled(), the variable ret is set but unused. Remove it to
avoid a compiler warning.

Link: https://lore.kernel.org/r/20200706123352.452003-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid: Fix set but unused variable

In megadev_ioctl(), if MEGA_HAVE_STATS is not defined, the variables
num_ldrv and ustats are unused. Conditionally define them to avoid compiler
warnings.

Link: https://lore.kernel.org/r/20200706123351.451959-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid: Remove set but unused variable

In mega_build_cmd(), the variable epthru is set but not used. Remove it to
avoid a compiler warning.

Link: https://lore.kernel.org/r/20200706123349.451915-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid: Remove set but unused variable

The variable remainder is unused in mega_div64_32(). Remove it to avoid a
compiler warning. While at it, also fix the function documentation
comments.

Link: https://lore.kernel.org/r/20200706123348.451871-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid: Fix compilation warnings

Move function declarations to megaraid_sas.h to avoid warnings such as:

warning: no previous prototype for ‘xxx'

No functional changes.

Link: https://lore.kernel.org/r/20200706123346.451827-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid: Fix kdoc comments format

Fix kernel documentation comments to avoid various warnings when compiling
with W=1.

No functional changes.

Link: https://lore.kernel.org/r/20200706123345.451783-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: zfcp: Avoid benign overflow of the Request Queue's free-level

zfcp_qdio_send() and zfcp_qdio_int_req() run concurrently, adding and
completing SBALs on the Request Queue. There's a theoretical race where
zfcp_qdio_int_req() completes a number of SBALs & increments the queue's
free-level _before_ zfcp_qdio_send() was able to decrement it.

This can cause ->req_q_free to momentarily hold a value larger than
QDIO_MAX_BUFFERS_PER_Q. Luckily zfcp_qdio_send() is always called under
->req_q_lock, and all readers of the free-level also take this lock. So we
can trust that zfcp_qdio_send() will clean up such a temporary overflow
before anyone can actually observe it.

But it's still confusing and annoying to worry about. So adjust the code to
avoid this race.

Link: https://lore.kernel.org/r/7f61f59a1f8db270312e64644f9173b8f1ac895f.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: zfcp: Replace open-coded list move

Instead of manually moving each element of the unit and port lists into our
temporary on-stack lists, splice them over in one go.

Link: https://lore.kernel.org/r/cacb179f49ece50fd4dce119c61252d632cdc1d4.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: zfcp: Clean up zfcp_erp_action_ready()

We already maintain a pointer to act->adapter. Use it consistently to avoid
any confusion about whose ->erp_ready_head and ->erp_ready_wq we are
accessing.

Link: https://lore.kernel.org/r/d1bb04322f240dee32f4c4a551bc93bc736f4b01.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: docs: Remove invalid link and update text for zfcp kernel config

IBM decided to retire a lot of the content that was previously hosted on
"developerworks", and so some of the links we've used for documentation are
now dead or redirect to some general landing page with no correlation to
what the links were meant to provide.

Change the provided link in the Kconfig file for zfcp to rather refer to
our device drivers book that we regularly update and publish for free, and
whose name hasn't been changed since it was first published.

Our hardware is also not called "IBM eServer zSeries" anymore - in fact, it
hasn't been called like that since 2006. Use a broader term that covers
different server names over time.

Lastly, add a short paragraph about how our HBAs are typically named, to
have some more tangible references.

Link: https://lore.kernel.org/r/96069b9f4c4f056a515b37e89b2bdfccc282e3d3.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: docs: Update outdated link to IBM developerworks

IBM decided to retire a lot of the content that was previously hosted on
"developerworks", and so some of the links we've used for documentation are
now dead or redirect to some general landing page with no correlation to
what the links were meant to provide.

The s390-tools package is meanwhile also hosted on github, so we can link
to the script directly instead of to the archive.

Link: https://lore.kernel.org/r/9ab0341d6ddca46cfc885e4cd9dc38f535969b02.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: zfcp: Fix an outdated comment for zfcp_qdio_send()

zfcp no longer uses the qdio PCI flag, update the comment.

Link: https://lore.kernel.org/r/6717c26fc986bff8776d110e27c199b523684c63.1593780621.git.bblock@linux.ibm.com
Fixes: 21ddaa53f92d ("[SCSI] zfcp: Remove PCI flag")
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: zfcp: Use prandom_u32_max() for backoff

We don't need crypto-grade random numbers for randomized backoffs.  Instead
use prandom_u32_max(ep_ro) which generates a pseudo-random number uniformly
distributed in the interval [0, ep_ro).

Link: https://lore.kernel.org/r/8fc7c4c4069ff1783f4a9ccd84a923f581a09ec5.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: George Spelvin <lkml@sdf.org>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: iscsi: Register sysfs for workqueue iscsi_destroy

Register sysfs for workqueue iscsi_destroy so that users can set CPU
affinity through "cpumask" for this workqueue to get better isolation in
cloud multi-tenant scenario.

This patch unfolded create_singlethread_workqueue(), added WQ_SYSFS and
drop __WQ_ORDERED_EXPLICIT since __WQ_ORDERED_EXPLICIT workqueue isn't
allowed to change "cpumask".

Link: https://lore.kernel.org/r/20200703051603.1473-1-bob.liu@oracle.com
Suggested-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Handle short iSIDs

SPC4 has:

The first ISCSI INITIATOR SESSION ID field byte containing an ASCII null
character terminates the ISCSI INITIATOR SESSION ID field without regard
for the specified length of the iSCSI TransportID or the contents of the
ADDITIONAL LENGTH field.
----------------------------------------

which sounds like we can get an iSID shorter than 12 chars. SPC and the
iSCSI RFC do not say how to handle that case other than just cutting off
the iSID. This patch just makes sure that if we get an iSID like that, we
only copy/send that string.

There is no OS that does this right now, so there was no test case.  I did
test with sg utils to check it works as expected and nothing breaks.

Link: https://lore.kernel.org/r/1593654203-12442-8-git-send-email-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Fix iscsi transport id buf len calculation

The isid returned to the initiator is in string format which is 12
bytes. We also only add 1 terminating NULL and not one after the initiator
name and another one after the isid.

Link: https://lore.kernel.org/r/1593654203-12442-7-git-send-email-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Fix iscsi transport id buffer setup

This fixes the following bugs with the transport id setup for iscsi:

 1. Incorrectly adding NULL after initiator name for TPID format 1.

 2. For TPID format 1 buffer setup we are doing off+len, off++ and then
    also len+=some_value. This results in the isid going past buffer
    boundaries when we then do buf[off+len]

 3. The pr_reg_isid is the isid in string format which is 12 bytes, but we
    are only copying 6 bytes.

Link: https://lore.kernel.org/r/1593654203-12442-6-git-send-email-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Fix iscsi transport id parsing

The length passed in the ADDITIONAL LENGTH field includes padding and the
terminating NULL for the last field (name or isid depending on the format),
so we should not also try to calculate that and then double add that to the
returned length.

Link: https://lore.kernel.org/r/1593654203-12442-5-git-send-email-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Fix crash during SPEC_I_PT handling

__core_scsi3_add_registration clears the t10_pr_registration pr_reg_deve
and does a core_scsi3_lunacl_undepend_item which does an undepend and also
does a kref_put from the get done in __core_scsi3_alloc_registration. So
when we get to the bottom of core_scsi3_decode_spec_i_port the pr_reg_deve
is NULL and we crash when trying to access the local_pr_reg's pr_reg_deve.
We've also done an extra undepend for local_pr_reg and if we didn't crash
on the NULL we would have done an extra kref_put too.

This patch has us do a core_scsi3_lunacl_depend_item for local_pr_reg and
then let __core_scsi3_add_registration handle the cleanup for the
pr_reg_deve. We then just skip the undepend for the acl and tpg for the
local pr_reg.

The error path then works in a similar way, but we always do the
core_scsi3_lunacl_undepend_item since we never call
__core_scsi3_add_registration in that code path.

Link: https://lore.kernel.org/r/1593654203-12442-4-git-send-email-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Fix xcopy sess release leak

transport_init_session can allocate memory via percpu_ref_init, and
target_xcopy_release_pt never frees it. This adds a
transport_uninit_session function to handle cleanup of resources allocated
in the init function.

Link: https://lore.kernel.org/r/1593654203-12442-3-git-send-email-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Check enforce_pr_isids during registration

Move the check for enforce_pr_isids to the registration code where we can
fail at the time an initiator tries to register a path without an isid. In
its current place in __core_scsi3_locate_pr_reg, it is too late because it
can be registered and be reported in PR in commands and it is stuck in this
state because we cannot unregister it.

[mkp: applied by hand]

Link: https://lore.kernel.org/r/1593654203-12442-2-git-send-email-michael.christie@oracle.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: eesox: Fix different dev_id between request_irq() and free_irq()

The dev_id used in request_irq() and free_irq() should match. Use 'info' in
both cases.

Link: https://lore.kernel.org/r/20200626040553.944352-1-christophe.jaillet@wanadoo.fr
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: powertec: Fix different dev_id between request_irq() and free_irq()

The dev_id used in request_irq() and free_irq() should match. Use 'info' in
both cases.

Link: https://lore.kernel.org/r/20200626035948.944148-1-christophe.jaillet@wanadoo.fr
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_debug: Fix in_use bitmap corruption

Heavy testing indicates the irqsave() spinlock around the __set_bit() is
insufficient to stop following clear_bit() calls being rarely applied
out-of-order. Also the nearby failed kzalloc() path leading to
SCSI_MLQUEUE_HOST_BUSY does not properly undo the in_use bitmap and
num_in_q, fix.

Link: https://lore.kernel.org/r/20200702145355.522283-1-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: iscsi: Remove sessdestroylist

Just delete the sess from the session list instead of adding it to some
list we never use.

Link: https://lore.kernel.org/r/1593632868-6808-4-git-send-email-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: iscsi: Optimize work queue flush use

There is no need for one session to flush the entire iscsi_eh_timer_workq
when removing/unblocking a session. During removal we need to make sure our
works are not running anymore. And iscsi_unblock_session only needs to make
sure its work is done. The unblock work function will flush/cancel the
works it has conflicts with.

Link: https://lore.kernel.org/r/1593632868-6808-3-git-send-email-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: iscsi: Delay freeing target_id

If we are doing async removal of the session, we could be doing a
scsi_remove_target from the removal workqueue, and for the offload case we
could be doing a new session addition and scan to the same host. The
add/scan might then end up trying to use the target_id of the target we are
removing.

This patch just has a delay the freeing of the target_id until after the
scsi_remove_target has completed, so we know it's no longer in use.

Link: https://lore.kernel.org/r/1593632868-6808-2-git-send-email-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Register sysfs for SCSI workqueue

Permit scsi_wq_xxx and scsi_tmf_xxx to be bound to different CPUs to get
better isolation.

Use alloc_workqueue with WQ_SYSFS and drop __WQ_ORDERED_EXPLICIT since a
__WQ_ORDERED_EXPLICIT workqueue isn't allowed to change the CPU mask.

Link: https://lore.kernel.org/r/20200701030745.16897-2-bob.liu@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Update lpfc version to 12.8.0.2

Update lpfc version to 12.8.0.2

Link: https://lore.kernel.org/r/20200630215001.70793-15-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add an internal trace log buffer

The current logging methods typically end up requesting a reproduction with
a different logging level set to figure out what happened. This was mainly
by design to not clutter the kernel log messages with things that were
typically not interesting and the messages themselves could cause other
issues.

When looking to make a better system, it was seen that in many cases when
more data was wanted was when another message, usually at KERN_ERR level,
was logged.  And in most cases, what the additional logging that was then
enabled was typically. Most of these areas fell into the discovery machine.

Based on this summary, the following design has been put in place: The
driver will maintain an internal log (256 elements of 256 bytes).  The
"additional logging" messages that are usually enabled in a reproduction
will be changed to now log all the time to the internal log.  A new logging
level is defined - LOG_TRACE_EVENT.  When this level is set (it is not by
default) and a message marked as KERN_ERR is logged, all the messages in
the internal log will be dumped to the kernel log before the KERN_ERR
message is logged.

There is a timestamp on each message added to the internal log. However,
this timestamp is not converted to wall time when logged. The value of the
timestamp is solely to give a crude time reference for the messages.

Link: https://lore.kernel.org/r/20200630215001.70793-14-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add blk_io_poll support for latency improvment

Although the existing implementation is very good at high I/O load, on
tests involving light load, especially on only a few hardware queues,
latency was a little higher than it can be due to using workqueue
scheduling. Other tasks in the system can delay handling.

Change the lower level to use irq_poll by default which uses a softirq for
I/O completion. This gives better latency as variance in when the cq is
processed is reduced over the workqueue interface. However, as high load is
better served by not being in softirq when the CPU is loaded, work queues
are still used under high I/O load.

Link: https://lore.kernel.org/r/20200630215001.70793-13-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add support to display if adapter dumps are available

Currently, if there has been an issue whereby an adapter dump was taken,
there is nothing displayed to hint that it is present. Utilities must be
run and they must query for the status in order to then download the dump.

Add a message to the driver to query dump image presence when initializing
the SLI Port.

Link: https://lore.kernel.org/r/20200630215001.70793-12-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Allow applications to issue Common Set Features mailbox command

Currently the driver validates command codes received from the
application. COMMON_SET_FEATURES is not currently being approved.

Add definition of the missing command and allow it to be issued by
applications.

Link: https://lore.kernel.org/r/20200630215001.70793-11-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix language in 0373 message to reflect non-error message

Change vocabulary of 0373 log msg from "error" to "cmpl" The current
language of the 0373 message contains the word "error" which caused a
number of customers to inquire about the "error" and if it should be a
concern. It isn't an error, it's simply an io completion status.

Revise the message to replace the word "error" with "cmpl" for completion.

Link: https://lore.kernel.org/r/20200630215001.70793-10-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix kdump hang on PPC

When the kdump kernel shuts down lpfc calls flush_work_queue on an
interrupt to schedule the cq handler. When there is only one CPU active on
the kdump kernel, it is possible for the work_on to get scheduled on a
non-active CPU causing it to never be scheduled.

When in the kdump environment, per-CPU affinity of cq's to cpus is not
necessary. In those cases, use a general queue_work rather than a
queue_work_on().

Link: https://lore.kernel.org/r/20200630215001.70793-9-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix shost refcount mismatch when deleting vport

When vports are deleted, it is observed that there is memory/kthread
leakage as the vport isn't fully being released.

There is a shost reference taken in scsi_add_host_dma that is not released
during scsi_remove_host. It was noticed that other drivers resolve this by
doing a scsi_host_put after calling scsi_remove_host.

The vport_delete routine is taking two references one that corresponds to
an access to the scsi_host in the vport_delete routine and another that is
released after the adapter mailbox command completes that destroys the VPI
that corresponds to the vport.

Remove one of the references taken such that the second reference that is
put will complete the missing scsi_add_host_dma reference and the shost
will be terminated.

Link: https://lore.kernel.org/r/20200630215001.70793-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix stack trace seen while setting rrq active

Call traces have been observed running different tests that involve aborts
and setting the rrq active flag.  The lpfc_set_rrq_active routine is doing
a mempool_alloc under the soft_irq processing level. When the mempool needs
to get a new buffer from the free pool and has to wait for memory to become
free it will check the flags passed in on the alloc and dump the stack if
the thread is running in interrupt context.

Replace the GFP_KERNEL flag with GFP_ATOMIC so that the memory allocation
will not attempt to sleep if there is no mem available.

Link: https://lore.kernel.org/r/20200630215001.70793-7-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix oops due to overrun when reading SLI3 data

When using DUMP on SLI3 to read VPD and Port status data (config region
23), the adapter is overruning the kmalloc'd buffer causing havoc on other
consumers of the allocation pools.

Rework the loops processing the dump data and validate/size memory lengths
before performing bcopy.

Link: https://lore.kernel.org/r/20200630215001.70793-6-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix NVMe rport deregister and registration during ADISC

During driver unload/reload testing, the NVMe initiator would not
re-establish connectivity to NVMe controllers on reload.

The failing NVMe array supports concurrent FCP and NVMe operation via
different nport_id's. The array was repeatedly sending an ADISC every 2
seconds after PLOGI completed and while NVMe subsystems were executing
discovery. The target would continue this state for roughly 45 seconds.

The driver's current behavior on ADISC receipt is to validate a the ADISC
vs the device and issue a RESUME_RPI to restore transmission. The receipt
of the ADISC effectively caused a driver to take actions similar to a
logout and login for the remote port, causing the deregistration of the
nvme rport and a subsequent re-registration.  This caused a constant reset
and re-connect of the NVMe controller while this 45s window occurred. There
was no need for the state changes as ADISC does not change login state.

This patch corrects this behavior by validating if the remoteport is
already logged in (MAPPED) and when true, avoids the call to set the ndlp
state to MAPPED, which triggers the unreg/re-reg. Thus ADISC does not
change the login state of the node.

Link: https://lore.kernel.org/r/20200630215001.70793-5-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix missing MDS functionality

Visual code inspection of the MDS implementation revealed two errors in
the driver:

 - The set features Feature Code had an incorrect value

 - The routine that classifies command type for cmd completions was missing
   the Send Frame definition. Send Frame is used for MDS driver loopback.

Link: https://lore.kernel.org/r/20200630215001.70793-3-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix unused assignment in lpfc_sli4_bsg_link_diag_test

Coverity reported the following error:

  Assigned value that is never used may represent unnecessary computation.

The rc variable was initially assigned a value but in several cases, when
an error case is detected, it is reassigned a new value. The initial value
had little use.

In code-reviewing this routine, it could use some cleanup:

 - Setting the initialization value to -ENODEV is a much better choice and
   lessens code in the routine.

 - The wasn't tracking logic errors vs no error and mailbox failure.
   Better to resolve by adding a status to track the mailbox failure
   and merge it with the logic error when the routine returns.

Link: https://lore.kernel.org/r/20200630215001.70793-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: SAN congestion management implementation

* Firmware Initialization with SCM enabled based on NVRAM setting and
  firmware support (About Firmware).

* Enable PUREX and add support for fabric performance impact
  notification (FPIN) handling.

* Allocate a default PUREX item for each vha to handle memory allocation
  failures in ISR.

Link: https://lore.kernel.org/r/20200630102229.29660-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Change in PUREX to handle FPIN ELS requests

SAN Congestion Management generates ELS pkts whose size can vary and be >
64 bytes. Change the PUREX handling code to support non-standard ELS pkt
size.

Link: https://lore.kernel.org/r/20200630102229.29660-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Introduce a function for computing the debug message prefix

Instead of repeating the code for generating a debug message prefix six
times, introduce a function for computing the debug message prefix.

Link: https://lore.kernel.org/r/20200629225454.22863-10-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Make qla2x00_restart_isp() easier to read

Instead of using complicated control flow to only have one return statement
at the end of qla2x00_restart_isp(), return an error status as soon as it
is known that this function will fail.

Link: https://lore.kernel.org/r/20200629225454.22863-9-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix a Coverity complaint in qla2100_fw_dump()

'cnt' can exceed the size of the risc_ram[] array. Prevent that Coverity
complains by rewriting an address calculation expression. This patch fixes
the following Coverity complaint:

CID 337803 (#1 of 1): Out-of-bounds read (OVERRUN)
109. overrun-local: Overrunning array of 122880 bytes at byte offset 122880
by dereferencing pointer &fw->risc_ram[cnt].

Link: https://lore.kernel.org/r/20200629225454.22863-8-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Make __qla2x00_alloc_iocbs() initialize 32 bits of request_t.handle

The request_t 'handle' member is 32-bits wide, hence use wrt_reg_dword().
Change the cast in the wrt_reg_byte() call to make it clear that a regular
pointer is casted to an __iomem pointer.

Note: 'pkt' points to I/O memory for the qlafx00 adapter family and to
coherent memory for all other adapter families.

This patch fixes the following Coverity complaint:

CID 358864 (#1 of 1): Reliance on integer endianness (INCOMPATIBLE_CAST)
incompatible_cast: Pointer &pkt->handle points to an object whose effective
type is unsigned int (32 bits, unsigned) but is dereferenced as a narrower
unsigned short (16 bits, unsigned). This may lead to unexpected results
depending on machine endianness.

Link: https://lore.kernel.org/r/20200629225454.22863-7-bvanassche@acm.org
Fixes: 8ae6d9c7eb10 ("[SCSI] qla2xxx: Enhancements to support ISPFx00.")
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove a superfluous cast

Remove an unnecessary cast because it prevents the compiler to perform type
checking.

Link: https://lore.kernel.org/r/20200629225454.22863-6-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Initialize 'n' before using it

The following code:

qla82xx_rom_fast_read(ha, 0, &n)

only initializes 'n' if it succeeds. Since 'n' may be reported in a debug
message even if no ROM reads succeeded, initialize 'n' to zero.

This patch fixes the following sparse warning:

qla_nx.c:1218: qla82xx_pinit_from_rom() error: uninitialized symbol 'n'.

Link: https://lore.kernel.org/r/20200629225454.22863-5-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Make qla82xx_flash_wait_write_finish() easier to read

Return early instead of having a single return statement at the end of this
function. This patch fixes the following sparse warning:

qla_nx.c:1018: qla82xx_flash_wait_write_finish() error: uninitialized symbol 'val'.

Link: https://lore.kernel.org/r/20200629225454.22863-4-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove the __packed annotation from struct fcp_hdr and fcp_hdr_le

Remove the __packed annotation from struct fcp_hdr* because that annotation
is not necessary for these data structures.

Link: https://lore.kernel.org/r/20200629225454.22863-3-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Check the size of struct fcp_hdr at compile time

Since struct fcp_hdr is used to exchange data with the firmware, check its
size at compile time.

Link: https://lore.kernel.org/r/20200629225454.22863-2-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: tcmu: Fix crash on ARM during cmd completion

If tcmu_handle_completions() has to process a padding shorter than
sizeof(struct tcmu_cmd_entry), the current call to
tcmu_flush_dcache_range() with sizeof(struct tcmu_cmd_entry) as length
param is wrong and causes crashes on e.g. ARM, because
tcmu_flush_dcache_range() in this case calls
flush_dcache_page(vmalloc_to_page(start)); with start being an invalid
address above the end of the vmalloc'ed area.

The fix is to use the minimum of remaining ring space and sizeof(struct
tcmu_cmd_entry) as the length param.

The patch was tested on kernel 4.19.118.

See https://bugzilla.kernel.org/show_bug.cgi?id=208045#c10

Link: https://lore.kernel.org/r/20200629093756.8947-1-bstroesser@ts.fujitsu.com
Tested-by: JiangYu <lnsyyj@hotmail.com>
Acked-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-exynos: Remove an unnecessary NULL check

The "head" pointer can't be NULL because it points to an address in the
middle of a ufs_hba struct.  Looking at this code, probably someone would
wonder if the intent was to check whether "hba" is NULL, but "hba" isn't
NULL and the check can just be removed.

Link: https://lore.kernel.org/r/20200626105133.GF314359@mwanda
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: storvsc: Fix spelling mistake

Fix typo: "trigerred" --> "triggered"

Link: https://lore.kernel.org/r/20200624135600.14274-1-f.suligoi@asem.it
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Disable WriteBooster capability for non-supported UFS devices

If a UFS device is not qualified to use WriteBooster, either due to wrong
UFS version or device-specific quirks, then the capability in host shall be
disabled to prevent any WriteBooster operations in the future.

Link: https://lore.kernel.org/r/20200625030430.25048-1-stanley.chu@mediatek.com
Fixes: 3d17b9b5ab11 ("scsi: ufs: Add write booster feature support")
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2fc: Removal of unused variables

Removed all the unused variables.

Link: https://lore.kernel.org/r/20200622093814.3250-1-jhasan@marvell.com
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: cumana_2: Fix different dev_id between request_irq() and free_irq()

The dev_id used in request_irq() and free_irq() should match.  Use 'info'
in both cases.

Link: https://lore.kernel.org/r/20200625204730.943520-1-christophe.jaillet@wanadoo.fr
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-exynos: Fix build warning

While building for x86_64 allmodconfig, the following warning was reported:

WARNING: modpost: missing MODULE_LICENSE() in drivers/scsi/ufs/ufs-exynos.o

Add the missing license/author/description tags.

Link: https://lore.kernel.org/r/20200625154405.60448-1-alim.akhtar@samsung.com
Fixes: 55f4b1f73631 ("scsi: ufs: ufs-exynos: Add UFS host support for Exynos SoCs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-exynos: Fix return value check in exynos_ufs_init()

In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().

Link: https://lore.kernel.org/r/20200618133837.127274-1-weiyongjun1@huawei.com
Fixes: 55f4b1f73631 ("scsi: ufs: ufs-exynos: Add UFS host support for Exynos SoCs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Allow exynos ufs driver to build as module

Allow Exynos UFS driver to build as a module.  This patch fixes the
followin build issue reported by kernel build robot.

drivers/scsi/ufs/ufs-exynos.o: in function `exynos_ufs_probe':
drivers/scsi/ufs/ufs-exynos.c:1231: undefined reference to `ufshcd_pltfrm_init'
drivers/scsi/ufs/ufs-exynos.o: in function `exynos_ufs_pre_pwr_mode':
drivers/scsi/ufs/ufs-exynos.c:635: undefined reference to `ufshcd_get_pwr_dev_param'
drivers/scsi/ufs/ufs-exynos.o:undefined reference to `ufshcd_pltfrm_shutdown'
drivers/scsi/ufs/ufs-exynos.o:undefined reference to `ufshcd_pltfrm_suspend'
drivers/scsi/ufs/ufs-exynos.o:undefined reference to `ufshcd_pltfrm_resume'
drivers/scsi/ufs/ufs-exynos.o:undefined reference to `ufshcd_pltfrm_runtime_suspend'
drivers/scsi/ufs/ufs-exynos.o:undefined reference to `ufshcd_pltfrm_runtime_resume'
drivers/scsi/ufs/ufs-exynos.o:undefined reference to `ufshcd_pltfrm_runtime_idle'

Link: https://lore.kernel.org/r/20200620173232.52521-1-alim.akhtar@samsung.com
Fixes: 55f4b1f73631 ("scsi: ufs: ufs-exynos: Add UFS host support for Exynos SoCs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: tcmu: Fix crash in tcmu_flush_dcache_range on ARM

This patch fixes the following crash (see
https://bugzilla.kernel.org/show_bug.cgi?id=208045)

 Process iscsi_trx (pid: 7496, stack limit = 0x0000000010dd111a)
 CPU: 0 PID: 7496 Comm: iscsi_trx Not tainted 4.19.118-0419118-generic
        #202004230533
 Hardware name: Greatwall QingTian DF720/F601, BIOS 601FBE20 Sep 26 2019
 pstate: 80400005 (Nzcv daif +PAN -UAO)
 pc : flush_dcache_page+0x18/0x40
 lr : is_ring_space_avail+0x68/0x2f8 [target_core_user]
 sp : ffff000015123a80
 x29: ffff000015123a80 x28: 0000000000000000
 x27: 0000000000001000 x26: ffff000023ea5000
 x25: ffffcfa25bbe08b8 x24: 0000000000000078
 x23: ffff7e0000000000 x22: ffff000023ea5001
 x21: ffffcfa24b79c000 x20: 0000000000000fff
 x19: ffff7e00008fa940 x18: 0000000000000000
 x17: 0000000000000000 x16: ffff2d047e709138
 x15: 0000000000000000 x14: 0000000000000000
 x13: 0000000000000000 x12: ffff2d047fbd0a40
 x11: 0000000000000000 x10: 0000000000000030
 x9 : 0000000000000000 x8 : ffffc9a254820a00
 x7 : 00000000000013b0 x6 : 000000000000003f
 x5 : 0000000000000040 x4 : ffffcfa25bbe08e8
 x3 : 0000000000001000 x2 : 0000000000000078
 x1 : ffffcfa25bbe08b8 x0 : ffff2d040bc88a18
 Call trace:
  flush_dcache_page+0x18/0x40
  is_ring_space_avail+0x68/0x2f8 [target_core_user]
  queue_cmd_ring+0x1f8/0x680 [target_core_user]
  tcmu_queue_cmd+0xe4/0x158 [target_core_user]
  __target_execute_cmd+0x30/0xf0 [target_core_mod]
  target_execute_cmd+0x294/0x390 [target_core_mod]
  transport_generic_new_cmd+0x1e8/0x358 [target_core_mod]
  transport_handle_cdb_direct+0x50/0xb0 [target_core_mod]
  iscsit_execute_cmd+0x2b4/0x350 [iscsi_target_mod]
  iscsit_sequence_cmd+0xd8/0x1d8 [iscsi_target_mod]
  iscsit_process_scsi_cmd+0xac/0xf8 [iscsi_target_mod]
  iscsit_get_rx_pdu+0x404/0xd00 [iscsi_target_mod]
  iscsi_target_rx_thread+0xb8/0x130 [iscsi_target_mod]
  kthread+0x130/0x138
  ret_from_fork+0x10/0x18
 Code: f9000bf3 aa0003f3 aa1e03e0 d503201f (f9400260)
 ---[ end trace 1e451c73f4266776 ]---

The solution is based on patch:

  "scsi: target: tcmu: Optimize use of flush_dcache_page"

which restricts the use of tcmu_flush_dcache_range() to addresses from
vmalloc'ed areas only.

This patch now replaces the virt_to_page() call in
tcmu_flush_dcache_range() - which is wrong for vmalloced addrs - by
vmalloc_to_page().

The patch was tested on ARM with kernel 4.19.118 and 5.7.2

Link: https://lore.kernel.org/r/20200618131632.32748-3-bstroesser@ts.fujitsu.com
Tested-by: JiangYu <lnsyyj@hotmail.com>
Tested-by: Daniel Meyerholt <dxm523@gmail.com>
Acked-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: tcmu: Optimize use of flush_dcache_page

(scatter|gather)_data_area() need to flush dcache after writing data to or
before reading data from a page in uio data area.  The two routines are
able to handle data transfer to/from such a page in fragments and flush the
cache after each fragment was copied by calling the wrapper
tcmu_flush_dcache_range().

That means:

1) flush_dcache_page() can be called multiple times for the same page.

2) Calling flush_dcache_page() indirectly using the wrapper does not make
   sense, because each call of the wrapper is for one single page only and
   the calling routine already has the correct page pointer.

Change (scatter|gather)_data_area() such that, instead of calling
tcmu_flush_dcache_range() before/after each memcpy, it now calls
flush_dcache_page() before unmapping a page (when writing is complete for
that page) or after mapping a page (when starting to read the page).

After this change only calls to tcmu_flush_dcache_range() for addresses in
vmalloc'ed command ring are left over.

The patch was tested on ARM with kernel 4.19.118 and 5.7.2

Link: https://lore.kernel.org/r/20200618131632.32748-2-bstroesser@ts.fujitsu.com
Tested-by: JiangYu <lnsyyj@hotmail.com>
Tested-by: Daniel Meyerholt <dxm523@gmail.com>
Acked-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: docs: Add WriteBooster documentation

Adds sysfs documentation for WriteBooster entries.

Link: https://lore.kernel.org/r/1591723067-22998-1-git-send-email-asutoshd@codeaurora.org
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Fix formatting errors in scsi_lib.c

Delete trailing whitespace, multiple blank lines, and make switch/case be
at the same indentation.

Link: https://lore.kernel.org/r/20200619154117.10262-3-huobean@gmail.com
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Remove scsi_sdb_cache

After commit f664a3cc17b7 ("scsi: kill off the legacy IO path"),
scsi_sdb_cache is not used anymore. Remove it.

Link: https://lore.kernel.org/r/20200619154117.10262-2-huobean@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: tcmu: Remove unnecessary bit TCMU_CMD_BIT_INFLIGHT

Since commit 61fb24822166 ("scsi: target: tcmu: Userspace must not complete
queued commands") tcmu_cmd bit TCMU_CMD_BIT_INFLIGHT is set but never
checked.  So we can remove it safely.

[mkp: fixed Mike's email address]

Link: https://lore.kernel.org/r/20200619173806.5016-1-bstroesser@ts.fujitsu.com
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Acked-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-exynos: Fix spelling mistake "pa_granularty" -> "pa_granularity"

There is a spelling mistake in a dev_warn message. Fix it.

Link: https://lore.kernel.org/r/20200617084911.167359-1-colin.king@canonical.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-mediatek: Make ufs_mtk_wait_link_state static

Fix build warning reported by kernel test robot:

Warning:
>> drivers/scsi/ufs/ufs-mediatek.c:181:5: warning: no previous prototype
>> for 'ufs_mtk_wait_link_state' [-Wmissing-prototypes]

Link: https://lore.kernel.org/r/20200616095120.14570-1-stanley.chu@mediatek.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Fix imprecise load calculation in devfreq window

The UFS load calculation is based on "total_time" and "busy_time" in a
devfreq window.  However, the source of time is different for both
parameters: "busy_time" is assigned from "jiffies" thus has different
accuracy from "total_time" which is assigned from ktime_get().

In addition, the time of window boundary is not exactly the same as the
starting busy time in this window if UFS is actually busy in the beginning
of the window. A similar accuracy error may also happen for the end of busy
time in current window.

To guarantee the precision of load calculation, we need to

1. Align time accuracy of both devfreq_dev_status.total_time and
   devfreq_dev_status.busy_time. For example, use "ktime_get()" directly.

2. Align the following timelines:
   - The beginning time of devfreq windows
   - The beginning of busy time in a new window
   - The end of busy time in the current window

Link: https://lore.kernel.org/r/20200611101043.6379-1-stanley.chu@mediatek.com
Fixes: a3cd5ec55f6c ("scsi: ufs: add load based scaling of UFS gear")
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Add trace event for UIC commands

Use the ftrace infrastructure to conditionally trace UFS UIC command
events.

New trace event "ufshcd_uic_command" is created, which samples the
following UFS UIC command data:

 - Device name
 - Optional identification string
 - UIC command opcode
 - UIC command argument1
 - UIC command argument2
 - UIC command argement3

Usage:
echo 1 > /sys/kernel/debug/tracing/events/ufs/enable
cat /sys/kernel/debug/tracing/trace_pipe

Link: https://lore.kernel.org/r/20200615072235.23042-3-stanley.chu@mediatek.com
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Remove unused field in struct uic_command

Remove unused fields "cmd_active" and "result" in struct ufs_command.

Link: https://lore.kernel.org/r/20200615072235.23042-2-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Clean up device vendor name and device quirk table

Clean up the following items:

 - Sort vendor names in alphabetical order

 - Squash quirks as compact as possible in device table to enhance
   performance of the lookup

 - Sort device quirks in alphabetical order

Link: https://lore.kernel.org/r/20200612012625.6615-3-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Add DELAY_BEFORE_LPM quirk for Micron devices

It is confirmed that Micron device needs DELAY_BEFORE_LPM quirk to have a
delay before VCC is powered off. Sdd Micron vendor ID and this quirk for
Micron devices.

Link: https://lore.kernel.org/r/20200612012625.6615-2-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Fix spelling mistake

Fix typo: "tigger" --> "trigger"

Link: https://lore.kernel.org/r/20200609161313.32098-1-f.suligoi@asem.it
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: Fix trivial spelling

The word 'descriptor' is misspelled throughout the tree.

Fix it up accordingly:
    decriptors -> descriptors

Link: https://lore.kernel.org/r/20200609124610.3445662-7-kieran.bingham+renesas@ideasonboard.com
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Add SPDX GPL-2.0 to replace GPL v2 boilerplate

Add SPDX GPL-2.0 to UFS driver files that specified the GPL version 2
license, remove the full boilerplate text.

Link: https://lore.kernel.org/r/20200605200520.20831-2-huobean@gmail.com
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Add compatibility with 3.1 UFS unit descriptor length

For UFS 3.1, the normal unit descriptor is 10 bytes larger than the RPMB
unit. However, both descriptors share the same desc_idn, to cover both unit
descriptors with one length, we choose the normal unit descriptor length by
desc_index.

Link: https://lore.kernel.org/r/20200603091959.27618-6-huobean@gmail.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Clean up ufs initialization path

At UFS initialization stage, to get the length of the descriptor,
ufshcd_read_desc_length() was being called 6 times. Instead, we will
capture the descriptor size the first time we'll read it.

Delete unnecessary redundant code, remove ufshcd_read_desc_length(),
ufshcd_init_desc_sizes(), and boost UFS initialization.

Link: https://lore.kernel.org/r/20200603091959.27618-5-huobean@gmail.com
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Fix potential NULL pointer access during memcpy

If param_offset is not 0, the memcpy length shouldn't be the true
descriptor length.

Link: https://lore.kernel.org/r/20200603091959.27618-4-huobean@gmail.com
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Delete ufshcd_read_desc()

Delete ufshcd_read_desc(). Instead, let caller directly call
ufshcd_read_desc_param().

Link: https://lore.kernel.org/r/20200603091959.27618-3-huobean@gmail.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Remove max_t in ufs_get_device_desc

For the UFS device, the maximum descriptor size is 255, max_t called on
ufs_get_device_desc() is useless.

Link: https://lore.kernel.org/r/20200603091959.27618-2-huobean@gmail.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-mediatek: Allow unbound mphy

Allow unbound MPHY module since not every MediaTek UFS platform needs
specific MPHY control.

Link: https://lore.kernel.org/r/20200601104646.15436-6-stanley.chu@mediatek.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-mediatek: Fix unbalanced clock on/off

MediaTek UFS clocks are separated to two parts and controlled by different
modules: ufs-mediatek and phy-ufs-mediatek.

If both Auto-Hibern8 and clk-gating feature are enabled, mphy power control
is not balanced thus unbalanced control also happens to the clocks probed
by phy-ufs-mediatek module.

Fix this issue by:

 - Promise usage of phy_power_on/off balanced

 - Remove phy_power_on/off control in suspend/resume vops since both can be
   handled in setup_clock vops only

Link: https://lore.kernel.org/r/20200601104646.15436-5-stanley.chu@mediatek.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-mediatek: Introduce low-power mode for device power supply

Allow device power supply to enter low-power mode.

Link: https://lore.kernel.org/r/20200601104646.15436-4-stanley.chu@mediatek.com
Reviewed-by: Pengshun Zhao <pengshun.zhao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-mediatek: Do not gate clocks if auto-hibern8 is not entered yet

There is a chance that link enters hibern8 via auto-hibern8 scheme during
the clock-gating flow. Clocks shall not be gated if link is still active
otherwise host or device may hang.

Fix this by returning error code to the caller __ufshcd_setup_clocks() to
skip gating clocks there if link is not confirmed in hibern8 state yet.

Also allow some waiting time for the hibern8 state transition.

Link: https://lore.kernel.org/r/20200601104646.15436-3-stanley.chu@mediatek.com
Reviewed-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-mediatek: Fix imprecise waiting time for ref-clk control

Currently ref-clk control timeout is implemented by jiffies. However
jiffies is not accurate enough thus "false timeout" may happen.

Use more accurate delay mechanism instead, i.e. ktime.

Link: https://lore.kernel.org/r/20200601104646.15436-2-stanley.chu@mediatek.com
Reviewed-by: Andy Teng <andy.teng@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-exynos: Add UFS host support for Exynos SoCs

This patch introduces Exynos UFS host controller driver which mainly
handles vendor-specific operations including link startup, power mode
change and hibernation/unhibernation.

[robot: drivers/scsi/ufs/ufs-exynos.c:931:8-10:
 WARNING: possible condition with no effect (if == else)
]

Link: https://lore.kernel.org/r/20200528011658.71590-10-alim.akhtar@samsung.com
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Tested-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Kiwoong Kim <kwmad.kim@samsung.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Seungwon Jeon <essuuj@gmail.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Add quirk to fix abnormal ocs fatal error

Some controller like Exynos determines if FATAL ERROR (0x7) in OCS field in
UTRD occurs for values other than GOOD (0x0) in STATUS field in response
upiu as well as errors that a host controller can't cover.  This patch is
to prevent from reporting command results in those cases.

Link: https://lore.kernel.org/r/20200528011658.71590-6-alim.akhtar@samsung.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk

Some UFS host controllers like Exynos uses granularities of PRDT length and
offset as bytes, whereas others use actual segment count.

Link: https://lore.kernel.org/r/20200528011658.71590-5-alim.akhtar@samsung.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>